drivers/pnp/quirks.c

   1 /*
   2  *  This file contains quirk handling code for PnP devices
   3  *  Some devices do not report all their resources, and need to have extra
   4  *  resources added. This is most easily accomplished at initialisation time
   5  *  when building up the resource structure for the first time.
   6  *
   7  *  Copyright (c) 2000 Peter Denison <peterd@pnd-pc.demon.co.uk>
   8  *
   9  *  Heavily based on PCI quirks handling which is
  10  *
  11  *  Copyright (c) 1999 Martin Mares <mj@ucw.cz>
  12  */
  13
  14 #include <linux/types.h>
  15 #include <linux/kernel.h>
  16 #include <linux/string.h>
  17 #include <linux/slab.h>
  18 #include <linux/pnp.h>
  19 #include <linux/io.h>
  20 #include "base.h"
  21
  22
  23 static void quirk_awe32_resources(struct pnp_dev *dev)
  24 {
  25         struct pnp_port *port, *port2, *port3;
  26         struct pnp_option *res = dev->dependent;
  27
  28         /*
  29          * Unfortunately the isapnp_add_port_resource is too tightly bound
  30          * into the PnP discovery sequence, and cannot be used. Link in the
  31          * two extra ports (at offset 0x400 and 0x800 from the one given) by
  32          * hand.
  33          */
  34         for ( ; res ; res = res->next ) {
  35                 port2 = pnp_alloc(sizeof(struct pnp_port));
  36                 if (!port2)
  37                         return;
  38                 port3 = pnp_alloc(sizeof(struct pnp_port));
  39                 if (!port3) {
  40                         kfree(port2);
  41                         return;
  42                 }
  43                 port = res->port;
  44                 memcpy(port2, port, sizeof(struct pnp_port));
  45                 memcpy(port3, port, sizeof(struct pnp_port));
  46                 port->next = port2;
  47                 port2->next = port3;
  48                 port2->min += 0x400;
  49                 port2->max += 0x400;
  50                 port3->min += 0x800;
  51                 port3->max += 0x800;
  52         }
  53         printk(KERN_INFO "pnp: AWE32 quirk - adding two ports\n");
  54 }
  55
  56 static void quirk_cmi8330_resources(struct pnp_dev *dev)
  57 {
  58         struct pnp_option *res = dev->dependent;
  59         unsigned long tmp;
  60
  61         for ( ; res ; res = res->next ) {
  62
  63                 struct pnp_irq *irq;
  64                 struct pnp_dma *dma;
  65
  66                 for( irq = res->irq; irq; irq = irq->next ) {   // Valid irqs are 5, 7, 10
  67                         tmp = 0x04A0;
  68                         bitmap_copy(irq->map, &tmp, 16);        // 0000 0100 1010 0000
  69                 }
  70
  71                 for( dma = res->dma; dma; dma = dma->next ) // Valid 8bit dma channels are 1,3
  72                         if( ( dma->flags & IORESOURCE_DMA_TYPE_MASK ) == IORESOURCE_DMA_8BIT )
  73                                 dma->map = 0x000A;
  74         }
  75         printk(KERN_INFO "pnp: CMI8330 quirk - fixing interrupts and dma\n");
  76 }
  77
  78 static void quirk_sb16audio_resources(struct pnp_dev *dev)
  79 {
  80         struct pnp_port *port;
  81         struct pnp_option *res = dev->dependent;
  82         int    changed = 0;
  83
  84         /*
  85          * The default range on the mpu port for these devices is 0x388-0x388.
  86          * Here we increase that range so that two such cards can be
  87          * auto-configured.
  88          */
  89
  90         for( ; res ; res = res->next ) {
  91                 port = res->port;
  92                 if(!port)
  93                         continue;
  94                 port = port->next;
  95                 if(!port)
  96                         continue;
  97                 port = port->next;
  98                 if(!port)
  99                         continue;
 100                 if(port->min != port->max)
 101                         continue;
 102                 port->max += 0x70;
 103                 changed = 1;
 104         }
 105         if(changed)
 106                 printk(KERN_INFO "pnp: SB audio device quirk - increasing port range\n");
 107         return;
 108 }
 109
 110 static void quirk_smc_enable(struct pnp_dev *dev)
 111 {
 112         unsigned int firbase;
 113
 114         if (!dev->active || !pnp_port_valid(dev, 1))
 115                 return;
 116
 117         /*
 118          * On the HP/Compaq nw8240 (and probably other similar machines),
 119          * there is an SMCF010 device with two I/O port regions:
 120          *
 121          *      0x3e8-0x3ef SIR
 122          *      0x100-0x10f FIR
 123          *
 124          * _STA reports the device is enabled, but in fact, the BIOS
 125          * neglects to enable the FIR range.  Fortunately, it does fully
 126          * enable the device if we call _SRS.
 127          */
 128         firbase = pnp_port_start(dev, 1);
 129         if (inb(firbase + 0x7 /* IRCC_MASTER */) == 0xff) {
 130                 pnp_err("%s (%s) enabled but not responding, disabling and "
 131                         "re-enabling", dev->dev.bus_id, pnp_dev_name(dev));
 132                 pnp_disable_dev(dev);
 133                 pnp_activate_dev(dev);
 134         }
 135 }
 136
 137
 138 /*
 139  *  PnP Quirks
 140  *  Cards or devices that need some tweaking due to incomplete resource info
 141  */
 142
 143 static struct pnp_fixup pnp_fixups[] = {
 144         /* Soundblaster awe io port quirk */
 145         { "CTL0021", quirk_awe32_resources },
 146         { "CTL0022", quirk_awe32_resources },
 147         { "CTL0023", quirk_awe32_resources },
 148         /* CMI 8330 interrupt and dma fix */
 149         { "@X@0001", quirk_cmi8330_resources },
 150         /* Soundblaster audio device io port range quirk */
 151         { "CTL0001", quirk_sb16audio_resources },
 152         { "CTL0031", quirk_sb16audio_resources },
 153         { "CTL0041", quirk_sb16audio_resources },
 154         { "CTL0042", quirk_sb16audio_resources },
 155         { "CTL0043", quirk_sb16audio_resources },
 156         { "CTL0044", quirk_sb16audio_resources },
 157         { "CTL0045", quirk_sb16audio_resources },
 158         { "SMCf010", quirk_smc_enable },
 159         { "" }
 160 };
 161
 162 void pnp_fixup_device(struct pnp_dev *dev)
 163 {
 164         int i = 0;
 165
 166         while (*pnp_fixups[i].id) {
 167                 if (compare_pnp_id(dev->id,pnp_fixups[i].id)) {
 168                         pnp_dbg("Calling quirk for %s",
 169                                   dev->dev.bus_id);
 170                         pnp_fixups[i].quirk_function(dev);
 171                 }
 172                 i++;
 173         }
 174 }