drivers/power/Kconfig

   1 menuconfig POWER_SUPPLY
   2         tristate "Power supply class support"
   3         help
   4           Say Y here to enable power supply class support. This allows
   5           power supply (batteries, AC, USB) monitoring by userspace
   6           via sysfs and uevent (if available) and/or APM kernel interface
   7           (if selected below).
   8
   9 if POWER_SUPPLY
  10
  11 config POWER_SUPPLY_DEBUG
  12         bool "Power supply debug"
  13         help
  14           Say Y here to enable debugging messages for power supply class
  15           and drivers.
  16
  17 config PDA_POWER
  18         tristate "Generic PDA/phone power driver"
  19         depends on !S390
  20         help
  21           Say Y here to enable generic power driver for PDAs and phones with
  22           one or two external power supplies (AC/USB) connected to main and
  23           backup batteries, and optional builtin charger.
  24
  25 config APM_POWER
  26         tristate "APM emulation for class batteries"
  27         depends on APM_EMULATION
  28         help
  29           Say Y here to enable support APM status emulation using
  30           battery class devices.
  31
  32 config MAX8925_POWER
  33         tristate "MAX8925 battery charger support"
  34         depends on MFD_MAX8925
  35         help
  36           Say Y here to enable support for the battery charger in the Maxim
  37           MAX8925 PMIC.
  38
  39 config WM831X_BACKUP
  40         tristate "WM831X backup battery charger support"
  41         depends on MFD_WM831X
  42         help
  43           Say Y here to enable support for the backup battery charger
  44           in the Wolfson Microelectronics WM831x PMICs.
  45
  46 config WM831X_POWER
  47         tristate "WM831X PMU support"
  48         depends on MFD_WM831X
  49         help
  50           Say Y here to enable support for the power management unit
  51           provided by Wolfson Microelectronics WM831x PMICs.
  52
  53 config WM8350_POWER
  54         tristate "WM8350 PMU support"
  55         depends on MFD_WM8350
  56         help
  57           Say Y here to enable support for the power management unit
  58           provided by the Wolfson Microelectronics WM8350 PMIC.
  59
  60 config TEST_POWER
  61         tristate "Test power driver"
  62         help
  63           This driver is used for testing. It's safe to say M here.
  64
  65 config BATTERY_DS2760
  66         tristate "DS2760 battery driver (HP iPAQ & others)"
  67         select W1
  68         select W1_SLAVE_DS2760
  69         help
  70           Say Y here to enable support for batteries with ds2760 chip.
  71
  72 config BATTERY_DS2782
  73         tristate "DS2782/DS2786 standalone gas-gauge"
  74         depends on I2C
  75         help
  76           Say Y here to enable support for the DS2782/DS2786 standalone battery
  77           gas-gauge.
  78
  79 config BATTERY_PMU
  80         tristate "Apple PMU battery"
  81         depends on PPC32 && ADB_PMU
  82         help
  83           Say Y here to expose battery information on Apple machines
  84           through the generic battery class.
  85
  86 config BATTERY_OLPC
  87         tristate "One Laptop Per Child battery"
  88         depends on X86_32 && OLPC
  89         help
  90           Say Y to enable support for the battery on the OLPC laptop.
  91
  92 config BATTERY_TOSA
  93         tristate "Sharp SL-6000 (tosa) battery"
  94         depends on MACH_TOSA && MFD_TC6393XB && TOUCHSCREEN_WM97XX
  95         help
  96           Say Y to enable support for the battery on the Sharp Zaurus
  97           SL-6000 (tosa) models.
  98
  99 config BATTERY_COLLIE
 100         tristate "Sharp SL-5500 (collie) battery"
 101         depends on SA1100_COLLIE && MCP_UCB1200
 102         help
 103           Say Y to enable support for the battery on the Sharp Zaurus
 104           SL-5500 (collie) models.
 105
 106 config BATTERY_WM97XX
 107         bool "WM97xx generic battery driver"
 108         depends on TOUCHSCREEN_WM97XX=y
 109         help
 110           Say Y to enable support for battery measured by WM97xx aux port.
 111
 112 config BATTERY_BQ20Z75
 113         tristate "TI BQ20z75 gas gauge"
 114         depends on I2C
 115         help
 116          Say Y to include support for TI BQ20z75 SBS-compliant
 117          gas gauge and protection IC.
 118
 119 config BATTERY_BQ27x00
 120         tristate "BQ27x00 battery driver"
 121         depends on I2C
 122         help
 123           Say Y here to enable support for batteries with BQ27x00 (I2C) chips.
 124
 125 config BATTERY_DA9030
 126         tristate "DA9030 battery driver"
 127         depends on PMIC_DA903X
 128         help
 129           Say Y here to enable support for batteries charger integrated into
 130           DA9030 PMIC.
 131
 132 config BATTERY_MAX17040
 133         tristate "Maxim MAX17040 Fuel Gauge"
 134         depends on I2C
 135         help
 136           MAX17040 is fuel-gauge systems for lithium-ion (Li+) batteries
 137           in handheld and portable equipment. The MAX17040 is configured
 138           to operate with a single lithium cell
 139
 140 config BATTERY_Z2
 141         tristate "Z2 battery driver"
 142         depends on I2C && MACH_ZIPIT2
 143         help
 144           Say Y to include support for the battery on the Zipit Z2.
 145
 146 config BATTERY_S3C_ADC
 147         tristate "Battery driver for Samsung ADC based monitoring"
 148         depends on S3C_ADC
 149         help
 150           Say Y here to enable support for iPAQ h1930/h1940/rx1950 battery
 151
 152 config CHARGER_PCF50633
 153         tristate "NXP PCF50633 MBC"
 154         depends on MFD_PCF50633
 155         help
 156          Say Y to include support for NXP PCF50633 Main Battery Charger.
 157
 158 config BATTERY_JZ4740
 159         tristate "Ingenic JZ4740 battery"
 160         depends on MACH_JZ4740
 161         depends on MFD_JZ4740_ADC
 162         help
 163           Say Y to enable support for the battery on Ingenic JZ4740 based
 164           boards.
 165
 166           This driver can be build as a module. If so, the module will be
 167           called jz4740-battery.
 168
 169 config BATTERY_INTEL_MID
 170         tristate "Battery driver for Intel MID platforms"
 171         depends on INTEL_SCU_IPC && SPI
 172         help
 173           Say Y here to enable the battery driver on Intel MID
 174           platforms.
 175
 176 config CHARGER_ISP1704
 177         tristate "ISP1704 USB Charger Detection"
 178         depends on USB_OTG_UTILS
 179         help
 180           Say Y to enable support for USB Charger Detection with
 181           ISP1707/ISP1704 USB transceivers.
 182
 183 endif # POWER_SUPPLY