projects / deliverable / linux.git / blob
? search:
summary | shortlog | log | commit | commitdiff | tree
blame | history | raw | HEAD
rtlwifi: Change order in device startup
[deliverable/linux.git] / drivers / power / bq2415x_charger.c
1 /*
2 * bq2415x charger driver
3 *
4 * Copyright (C) 2011-2013 Pali Rohár <pali.rohar@gmail.com>
5 *
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License as published by
8 * the Free Software Foundation; either version 2 of the License, or
9 * (at your option) any later version.
10 *
11 * This program is distributed in the hope that it will be useful,
12 * but WITHOUT ANY WARRANTY; without even the implied warranty of
13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
14 * GNU General Public License for more details.
15 *
16 * You should have received a copy of the GNU General Public License along
17 * with this program; if not, write to the Free Software Foundation, Inc.,
18 * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
19 */
20
21 /*
22 * Datasheets:
23 * http://www.ti.com/product/bq24150
24 * http://www.ti.com/product/bq24150a
25 * http://www.ti.com/product/bq24152
26 * http://www.ti.com/product/bq24153
27 * http://www.ti.com/product/bq24153a
28 * http://www.ti.com/product/bq24155
29 */
30
31 #include <linux/kernel.h>
32 #include <linux/module.h>
33 #include <linux/param.h>
34 #include <linux/err.h>
35 #include <linux/workqueue.h>
36 #include <linux/sysfs.h>
37 #include <linux/platform_device.h>
38 #include <linux/power_supply.h>
39 #include <linux/idr.h>
40 #include <linux/i2c.h>
41 #include <linux/slab.h>
42
43 #include <linux/power/bq2415x_charger.h>
44
45 /* timeout for resetting chip timer */
46 #define BQ2415X_TIMER_TIMEOUT 10
47
48 #define BQ2415X_REG_STATUS 0x00
49 #define BQ2415X_REG_CONTROL 0x01
50 #define BQ2415X_REG_VOLTAGE 0x02
51 #define BQ2415X_REG_VENDER 0x03
52 #define BQ2415X_REG_CURRENT 0x04
53
54 /* reset state for all registers */
55 #define BQ2415X_RESET_STATUS BIT(6)
56 #define BQ2415X_RESET_CONTROL (BIT(4)|BIT(5))
57 #define BQ2415X_RESET_VOLTAGE (BIT(1)|BIT(3))
58 #define BQ2415X_RESET_CURRENT (BIT(0)|BIT(3)|BIT(7))
59
60 /* status register */
61 #define BQ2415X_BIT_TMR_RST 7
62 #define BQ2415X_BIT_OTG 7
63 #define BQ2415X_BIT_EN_STAT 6
64 #define BQ2415X_MASK_STAT (BIT(4)|BIT(5))
65 #define BQ2415X_SHIFT_STAT 4
66 #define BQ2415X_BIT_BOOST 3
67 #define BQ2415X_MASK_FAULT (BIT(0)|BIT(1)|BIT(2))
68 #define BQ2415X_SHIFT_FAULT 0
69
70 /* control register */
71 #define BQ2415X_MASK_LIMIT (BIT(6)|BIT(7))
72 #define BQ2415X_SHIFT_LIMIT 6
73 #define BQ2415X_MASK_VLOWV (BIT(4)|BIT(5))
74 #define BQ2415X_SHIFT_VLOWV 4
75 #define BQ2415X_BIT_TE 3
76 #define BQ2415X_BIT_CE 2
77 #define BQ2415X_BIT_HZ_MODE 1
78 #define BQ2415X_BIT_OPA_MODE 0
79
80 /* voltage register */
81 #define BQ2415X_MASK_VO (BIT(2)|BIT(3)|BIT(4)|BIT(5)|BIT(6)|BIT(7))
82 #define BQ2415X_SHIFT_VO 2
83 #define BQ2415X_BIT_OTG_PL 1
84 #define BQ2415X_BIT_OTG_EN 0
85
86 /* vender register */
87 #define BQ2415X_MASK_VENDER (BIT(5)|BIT(6)|BIT(7))
88 #define BQ2415X_SHIFT_VENDER 5
89 #define BQ2415X_MASK_PN (BIT(3)|BIT(4))
90 #define BQ2415X_SHIFT_PN 3
91 #define BQ2415X_MASK_REVISION (BIT(0)|BIT(1)|BIT(2))
92 #define BQ2415X_SHIFT_REVISION 0
93
94 /* current register */
95 #define BQ2415X_MASK_RESET BIT(7)
96 #define BQ2415X_MASK_VI_CHRG (BIT(4)|BIT(5)|BIT(6))
97 #define BQ2415X_SHIFT_VI_CHRG 4
98 /* N/A BIT(3) */
99 #define BQ2415X_MASK_VI_TERM (BIT(0)|BIT(1)|BIT(2))
100 #define BQ2415X_SHIFT_VI_TERM 0
101
102
103 enum bq2415x_command {
104 BQ2415X_TIMER_RESET,
105 BQ2415X_OTG_STATUS,
106 BQ2415X_STAT_PIN_STATUS,
107 BQ2415X_STAT_PIN_ENABLE,
108 BQ2415X_STAT_PIN_DISABLE,
109 BQ2415X_CHARGE_STATUS,
110 BQ2415X_BOOST_STATUS,
111 BQ2415X_FAULT_STATUS,
112
113 BQ2415X_CHARGE_TERMINATION_STATUS,
114 BQ2415X_CHARGE_TERMINATION_ENABLE,
115 BQ2415X_CHARGE_TERMINATION_DISABLE,
116 BQ2415X_CHARGER_STATUS,
117 BQ2415X_CHARGER_ENABLE,
118 BQ2415X_CHARGER_DISABLE,
119 BQ2415X_HIGH_IMPEDANCE_STATUS,
120 BQ2415X_HIGH_IMPEDANCE_ENABLE,
121 BQ2415X_HIGH_IMPEDANCE_DISABLE,
122 BQ2415X_BOOST_MODE_STATUS,
123 BQ2415X_BOOST_MODE_ENABLE,
124 BQ2415X_BOOST_MODE_DISABLE,
125
126 BQ2415X_OTG_LEVEL,
127 BQ2415X_OTG_ACTIVATE_HIGH,
128 BQ2415X_OTG_ACTIVATE_LOW,
129 BQ2415X_OTG_PIN_STATUS,
130 BQ2415X_OTG_PIN_ENABLE,
131 BQ2415X_OTG_PIN_DISABLE,
132
133 BQ2415X_VENDER_CODE,
134 BQ2415X_PART_NUMBER,
135 BQ2415X_REVISION,
136 };
137
138 enum bq2415x_chip {
139 BQUNKNOWN,
140 BQ24150,
141 BQ24150A,
142 BQ24151,
143 BQ24151A,
144 BQ24152,
145 BQ24153,
146 BQ24153A,
147 BQ24155,
148 BQ24156,
149 BQ24156A,
150 BQ24158,
151 };
152
153 static char *bq2415x_chip_name[] = {
154 "unknown",
155 "bq24150",
156 "bq24150a",
157 "bq24151",
158 "bq24151a",
159 "bq24152",
160 "bq24153",
161 "bq24153a",
162 "bq24155",
163 "bq24156",
164 "bq24156a",
165 "bq24158",
166 };
167
168 struct bq2415x_device {
169 struct device *dev;
170 struct bq2415x_platform_data init_data;
171 struct power_supply charger;
172 struct delayed_work work;
173 struct power_supply *notify_psy;
174 struct notifier_block nb;
175 enum bq2415x_mode reported_mode;/* mode reported by hook function */
176 enum bq2415x_mode mode; /* current configured mode */
177 enum bq2415x_chip chip;
178 const char *timer_error;
179 char *model;
180 char *name;
181 int autotimer; /* 1 - if driver automatically reset timer, 0 - not */
182 int automode; /* 1 - enabled, 0 - disabled; -1 - not supported */
183 int id;
184 };
185
186 /* each registered chip must have unique id */
187 static DEFINE_IDR(bq2415x_id);
188
189 static DEFINE_MUTEX(bq2415x_id_mutex);
190 static DEFINE_MUTEX(bq2415x_timer_mutex);
191 static DEFINE_MUTEX(bq2415x_i2c_mutex);
192
193 /**** i2c read functions ****/
194
195 /* read value from register */
196 static int bq2415x_i2c_read(struct bq2415x_device *bq, u8 reg)
197 {
198 struct i2c_client *client = to_i2c_client(bq->dev);
199 struct i2c_msg msg[2];
200 u8 val;
201 int ret;
202
203 if (!client->adapter)
204 return -ENODEV;
205
206 msg[0].addr = client->addr;
207 msg[0].flags = 0;
208 msg[0].buf = &reg;
209 msg[0].len = sizeof(reg);
210 msg[1].addr = client->addr;
211 msg[1].flags = I2C_M_RD;
212 msg[1].buf = &val;
213 msg[1].len = sizeof(val);
214
215 mutex_lock(&bq2415x_i2c_mutex);
216 ret = i2c_transfer(client->adapter, msg, ARRAY_SIZE(msg));
217 mutex_unlock(&bq2415x_i2c_mutex);
218
219 if (ret < 0)
220 return ret;
221
222 return val;
223 }
224
225 /* read value from register, apply mask and right shift it */
226 static int bq2415x_i2c_read_mask(struct bq2415x_device *bq, u8 reg,
227 u8 mask, u8 shift)
228 {
229 int ret;
230
231 if (shift > 8)
232 return -EINVAL;
233
234 ret = bq2415x_i2c_read(bq, reg);
235 if (ret < 0)
236 return ret;
237 return (ret & mask) >> shift;
238 }
239
240 /* read value from register and return one specified bit */
241 static int bq2415x_i2c_read_bit(struct bq2415x_device *bq, u8 reg, u8 bit)
242 {
243 if (bit > 8)
244 return -EINVAL;
245 return bq2415x_i2c_read_mask(bq, reg, BIT(bit), bit);
246 }
247
248 /**** i2c write functions ****/
249
250 /* write value to register */
251 static int bq2415x_i2c_write(struct bq2415x_device *bq, u8 reg, u8 val)
252 {
253 struct i2c_client *client = to_i2c_client(bq->dev);
254 struct i2c_msg msg[1];
255 u8 data[2];
256 int ret;
257
258 data[0] = reg;
259 data[1] = val;
260
261 msg[0].addr = client->addr;
262 msg[0].flags = 0;
263 msg[0].buf = data;
264 msg[0].len = ARRAY_SIZE(data);
265
266 mutex_lock(&bq2415x_i2c_mutex);
267 ret = i2c_transfer(client->adapter, msg, ARRAY_SIZE(msg));
268 mutex_unlock(&bq2415x_i2c_mutex);
269
270 /* i2c_transfer returns number of messages transferred */
271 if (ret < 0)
272 return ret;
273 else if (ret != 1)
274 return -EIO;
275
276 return 0;
277 }
278
279 /* read value from register, change it with mask left shifted and write back */
280 static int bq2415x_i2c_write_mask(struct bq2415x_device *bq, u8 reg, u8 val,
281 u8 mask, u8 shift)
282 {
283 int ret;
284
285 if (shift > 8)
286 return -EINVAL;
287
288 ret = bq2415x_i2c_read(bq, reg);
289 if (ret < 0)
290 return ret;
291
292 ret &= ~mask;
293 ret |= val << shift;
294
295 return bq2415x_i2c_write(bq, reg, ret);
296 }
297
298 /* change only one bit in register */
299 static int bq2415x_i2c_write_bit(struct bq2415x_device *bq, u8 reg,
300 bool val, u8 bit)
301 {
302 if (bit > 8)
303 return -EINVAL;
304 return bq2415x_i2c_write_mask(bq, reg, val, BIT(bit), bit);
305 }
306
307 /**** global functions ****/
308
309 /* exec command function */
310 static int bq2415x_exec_command(struct bq2415x_device *bq,
311 enum bq2415x_command command)
312 {
313 int ret;
314
315 switch (command) {
316 case BQ2415X_TIMER_RESET:
317 return bq2415x_i2c_write_bit(bq, BQ2415X_REG_STATUS,
318 1, BQ2415X_BIT_TMR_RST);
319 case BQ2415X_OTG_STATUS:
320 return bq2415x_i2c_read_bit(bq, BQ2415X_REG_STATUS,
321 BQ2415X_BIT_OTG);
322 case BQ2415X_STAT_PIN_STATUS:
323 return bq2415x_i2c_read_bit(bq, BQ2415X_REG_STATUS,
324 BQ2415X_BIT_EN_STAT);
325 case BQ2415X_STAT_PIN_ENABLE:
326 return bq2415x_i2c_write_bit(bq, BQ2415X_REG_STATUS, 1,
327 BQ2415X_BIT_EN_STAT);
328 case BQ2415X_STAT_PIN_DISABLE:
329 return bq2415x_i2c_write_bit(bq, BQ2415X_REG_STATUS, 0,
330 BQ2415X_BIT_EN_STAT);
331 case BQ2415X_CHARGE_STATUS:
332 return bq2415x_i2c_read_mask(bq, BQ2415X_REG_STATUS,
333 BQ2415X_MASK_STAT, BQ2415X_SHIFT_STAT);
334 case BQ2415X_BOOST_STATUS:
335 return bq2415x_i2c_read_bit(bq, BQ2415X_REG_STATUS,
336 BQ2415X_BIT_BOOST);
337 case BQ2415X_FAULT_STATUS:
338 return bq2415x_i2c_read_mask(bq, BQ2415X_REG_STATUS,
339 BQ2415X_MASK_FAULT, BQ2415X_SHIFT_FAULT);
340
341 case BQ2415X_CHARGE_TERMINATION_STATUS:
342 return bq2415x_i2c_read_bit(bq, BQ2415X_REG_CONTROL,
343 BQ2415X_BIT_TE);
344 case BQ2415X_CHARGE_TERMINATION_ENABLE:
345 return bq2415x_i2c_write_bit(bq, BQ2415X_REG_CONTROL,
346 1, BQ2415X_BIT_TE);
347 case BQ2415X_CHARGE_TERMINATION_DISABLE:
348 return bq2415x_i2c_write_bit(bq, BQ2415X_REG_CONTROL,
349 0, BQ2415X_BIT_TE);
350 case BQ2415X_CHARGER_STATUS:
351 ret = bq2415x_i2c_read_bit(bq, BQ2415X_REG_CONTROL,
352 BQ2415X_BIT_CE);
353 if (ret < 0)
354 return ret;
355 else
356 return ret > 0 ? 0 : 1;
357 case BQ2415X_CHARGER_ENABLE:
358 return bq2415x_i2c_write_bit(bq, BQ2415X_REG_CONTROL,
359 0, BQ2415X_BIT_CE);
360 case BQ2415X_CHARGER_DISABLE:
361 return bq2415x_i2c_write_bit(bq, BQ2415X_REG_CONTROL,
362 1, BQ2415X_BIT_CE);
363 case BQ2415X_HIGH_IMPEDANCE_STATUS:
364 return bq2415x_i2c_read_bit(bq, BQ2415X_REG_CONTROL,
365 BQ2415X_BIT_HZ_MODE);
366 case BQ2415X_HIGH_IMPEDANCE_ENABLE:
367 return bq2415x_i2c_write_bit(bq, BQ2415X_REG_CONTROL,
368 1, BQ2415X_BIT_HZ_MODE);
369 case BQ2415X_HIGH_IMPEDANCE_DISABLE:
370 return bq2415x_i2c_write_bit(bq, BQ2415X_REG_CONTROL,
371 0, BQ2415X_BIT_HZ_MODE);
372 case BQ2415X_BOOST_MODE_STATUS:
373 return bq2415x_i2c_read_bit(bq, BQ2415X_REG_CONTROL,
374 BQ2415X_BIT_OPA_MODE);
375 case BQ2415X_BOOST_MODE_ENABLE:
376 return bq2415x_i2c_write_bit(bq, BQ2415X_REG_CONTROL,
377 1, BQ2415X_BIT_OPA_MODE);
378 case BQ2415X_BOOST_MODE_DISABLE:
379 return bq2415x_i2c_write_bit(bq, BQ2415X_REG_CONTROL,
380 0, BQ2415X_BIT_OPA_MODE);
381
382 case BQ2415X_OTG_LEVEL:
383 return bq2415x_i2c_read_bit(bq, BQ2415X_REG_VOLTAGE,
384 BQ2415X_BIT_OTG_PL);
385 case BQ2415X_OTG_ACTIVATE_HIGH:
386 return bq2415x_i2c_write_bit(bq, BQ2415X_REG_VOLTAGE,
387 1, BQ2415X_BIT_OTG_PL);
388 case BQ2415X_OTG_ACTIVATE_LOW:
389 return bq2415x_i2c_write_bit(bq, BQ2415X_REG_VOLTAGE,
390 0, BQ2415X_BIT_OTG_PL);
391 case BQ2415X_OTG_PIN_STATUS:
392 return bq2415x_i2c_read_bit(bq, BQ2415X_REG_VOLTAGE,
393 BQ2415X_BIT_OTG_EN);
394 case BQ2415X_OTG_PIN_ENABLE:
395 return bq2415x_i2c_write_bit(bq, BQ2415X_REG_VOLTAGE,
396 1, BQ2415X_BIT_OTG_EN);
397 case BQ2415X_OTG_PIN_DISABLE:
398 return bq2415x_i2c_write_bit(bq, BQ2415X_REG_VOLTAGE,
399 0, BQ2415X_BIT_OTG_EN);
400
401 case BQ2415X_VENDER_CODE:
402 return bq2415x_i2c_read_mask(bq, BQ2415X_REG_VENDER,
403 BQ2415X_MASK_VENDER, BQ2415X_SHIFT_VENDER);
404 case BQ2415X_PART_NUMBER:
405 return bq2415x_i2c_read_mask(bq, BQ2415X_REG_VENDER,
406 BQ2415X_MASK_PN, BQ2415X_SHIFT_PN);
407 case BQ2415X_REVISION:
408 return bq2415x_i2c_read_mask(bq, BQ2415X_REG_VENDER,
409 BQ2415X_MASK_REVISION, BQ2415X_SHIFT_REVISION);
410 }
411 return -EINVAL;
412 }
413
414 /* detect chip type */
415 static enum bq2415x_chip bq2415x_detect_chip(struct bq2415x_device *bq)
416 {
417 struct i2c_client *client = to_i2c_client(bq->dev);
418 int ret = bq2415x_exec_command(bq, BQ2415X_PART_NUMBER);
419
420 if (ret < 0)
421 return ret;
422
423 switch (client->addr) {
424 case 0x6b:
425 switch (ret) {
426 case 0:
427 if (bq->chip == BQ24151A)
428 return bq->chip;
429 else
430 return BQ24151;
431 case 1:
432 if (bq->chip == BQ24150A ||
433 bq->chip == BQ24152 ||
434 bq->chip == BQ24155)
435 return bq->chip;
436 else
437 return BQ24150;
438 case 2:
439 if (bq->chip == BQ24153A)
440 return bq->chip;
441 else
442 return BQ24153;
443 default:
444 return BQUNKNOWN;
445 }
446 break;
447
448 case 0x6a:
449 switch (ret) {
450 case 0:
451 if (bq->chip == BQ24156A)
452 return bq->chip;
453 else
454 return BQ24156;
455 case 2:
456 return BQ24158;
457 default:
458 return BQUNKNOWN;
459 }
460 break;
461 }
462
463 return BQUNKNOWN;
464 }
465
466 /* detect chip revision */
467 static int bq2415x_detect_revision(struct bq2415x_device *bq)
468 {
469 int ret = bq2415x_exec_command(bq, BQ2415X_REVISION);
470 int chip = bq2415x_detect_chip(bq);
471
472 if (ret < 0 || chip < 0)
473 return -1;
474
475 switch (chip) {
476 case BQ24150:
477 case BQ24150A:
478 case BQ24151:
479 case BQ24151A:
480 case BQ24152:
481 if (ret >= 0 && ret <= 3)
482 return ret;
483 else
484 return -1;
485 case BQ24153:
486 case BQ24153A:
487 case BQ24156:
488 case BQ24156A:
489 case BQ24158:
490 if (ret == 3)
491 return 0;
492 else if (ret == 1)
493 return 1;
494 else
495 return -1;
496 case BQ24155:
497 if (ret == 3)
498 return 3;
499 else
500 return -1;
501 case BQUNKNOWN:
502 return -1;
503 }
504
505 return -1;
506 }
507
508 /* return chip vender code */
509 static int bq2415x_get_vender_code(struct bq2415x_device *bq)
510 {
511 int ret;
512
513 ret = bq2415x_exec_command(bq, BQ2415X_VENDER_CODE);
514 if (ret < 0)
515 return 0;
516
517 /* convert to binary */
518 return (ret & 0x1) +
519 ((ret >> 1) & 0x1) * 10 +
520 ((ret >> 2) & 0x1) * 100;
521 }
522
523 /* reset all chip registers to default state */
524 static void bq2415x_reset_chip(struct bq2415x_device *bq)
525 {
526 bq2415x_i2c_write(bq, BQ2415X_REG_CURRENT, BQ2415X_RESET_CURRENT);
527 bq2415x_i2c_write(bq, BQ2415X_REG_VOLTAGE, BQ2415X_RESET_VOLTAGE);
528 bq2415x_i2c_write(bq, BQ2415X_REG_CONTROL, BQ2415X_RESET_CONTROL);
529 bq2415x_i2c_write(bq, BQ2415X_REG_STATUS, BQ2415X_RESET_STATUS);
530 bq->timer_error = NULL;
531 }
532
533 /**** properties functions ****/
534
535 /* set current limit in mA */
536 static int bq2415x_set_current_limit(struct bq2415x_device *bq, int mA)
537 {
538 int val;
539
540 if (mA <= 100)
541 val = 0;
542 else if (mA <= 500)
543 val = 1;
544 else if (mA <= 800)
545 val = 2;
546 else
547 val = 3;
548
549 return bq2415x_i2c_write_mask(bq, BQ2415X_REG_CONTROL, val,
550 BQ2415X_MASK_LIMIT, BQ2415X_SHIFT_LIMIT);
551 }
552
553 /* get current limit in mA */
554 static int bq2415x_get_current_limit(struct bq2415x_device *bq)
555 {
556 int ret;
557
558 ret = bq2415x_i2c_read_mask(bq, BQ2415X_REG_CONTROL,
559 BQ2415X_MASK_LIMIT, BQ2415X_SHIFT_LIMIT);
560 if (ret < 0)
561 return ret;
562 else if (ret == 0)
563 return 100;
564 else if (ret == 1)
565 return 500;
566 else if (ret == 2)
567 return 800;
568 else if (ret == 3)
569 return 1800;
570 return -EINVAL;
571 }
572
573 /* set weak battery voltage in mV */
574 static int bq2415x_set_weak_battery_voltage(struct bq2415x_device *bq, int mV)
575 {
576 int val;
577
578 /* round to 100mV */
579 if (mV <= 3400 + 50)
580 val = 0;
581 else if (mV <= 3500 + 50)
582 val = 1;
583 else if (mV <= 3600 + 50)
584 val = 2;
585 else
586 val = 3;
587
588 return bq2415x_i2c_write_mask(bq, BQ2415X_REG_CONTROL, val,
589 BQ2415X_MASK_VLOWV, BQ2415X_SHIFT_VLOWV);
590 }
591
592 /* get weak battery voltage in mV */
593 static int bq2415x_get_weak_battery_voltage(struct bq2415x_device *bq)
594 {
595 int ret;
596
597 ret = bq2415x_i2c_read_mask(bq, BQ2415X_REG_CONTROL,
598 BQ2415X_MASK_VLOWV, BQ2415X_SHIFT_VLOWV);
599 if (ret < 0)
600 return ret;
601 return 100 * (34 + ret);
602 }
603
604 /* set battery regulation voltage in mV */
605 static int bq2415x_set_battery_regulation_voltage(struct bq2415x_device *bq,
606 int mV)
607 {
608 int val = (mV/10 - 350) / 2;
609
610 /*
611 * According to datasheet, maximum battery regulation voltage is
612 * 4440mV which is b101111 = 47.
613 */
614 if (val < 0)
615 val = 0;
616 else if (val > 47)
617 return -EINVAL;
618
619 return bq2415x_i2c_write_mask(bq, BQ2415X_REG_VOLTAGE, val,
620 BQ2415X_MASK_VO, BQ2415X_SHIFT_VO);
621 }
622
623 /* get battery regulation voltage in mV */
624 static int bq2415x_get_battery_regulation_voltage(struct bq2415x_device *bq)
625 {
626 int ret = bq2415x_i2c_read_mask(bq, BQ2415X_REG_VOLTAGE,
627 BQ2415X_MASK_VO, BQ2415X_SHIFT_VO);
628
629 if (ret < 0)
630 return ret;
631 return 10 * (350 + 2*ret);
632 }
633
634 /* set charge current in mA (platform data must provide resistor sense) */
635 static int bq2415x_set_charge_current(struct bq2415x_device *bq, int mA)
636 {
637 int val;
638
639 if (bq->init_data.resistor_sense <= 0)
640 return -ENOSYS;
641
642 val = (mA * bq->init_data.resistor_sense - 37400) / 6800;
643 if (val < 0)
644 val = 0;
645 else if (val > 7)
646 val = 7;
647
648 return bq2415x_i2c_write_mask(bq, BQ2415X_REG_CURRENT, val,
649 BQ2415X_MASK_VI_CHRG | BQ2415X_MASK_RESET,
650 BQ2415X_SHIFT_VI_CHRG);
651 }
652
653 /* get charge current in mA (platform data must provide resistor sense) */
654 static int bq2415x_get_charge_current(struct bq2415x_device *bq)
655 {
656 int ret;
657
658 if (bq->init_data.resistor_sense <= 0)
659 return -ENOSYS;
660
661 ret = bq2415x_i2c_read_mask(bq, BQ2415X_REG_CURRENT,
662 BQ2415X_MASK_VI_CHRG, BQ2415X_SHIFT_VI_CHRG);
663 if (ret < 0)
664 return ret;
665 return (37400 + 6800*ret) / bq->init_data.resistor_sense;
666 }
667
668 /* set termination current in mA (platform data must provide resistor sense) */
669 static int bq2415x_set_termination_current(struct bq2415x_device *bq, int mA)
670 {
671 int val;
672
673 if (bq->init_data.resistor_sense <= 0)
674 return -ENOSYS;
675
676 val = (mA * bq->init_data.resistor_sense - 3400) / 3400;
677 if (val < 0)
678 val = 0;
679 else if (val > 7)
680 val = 7;
681
682 return bq2415x_i2c_write_mask(bq, BQ2415X_REG_CURRENT, val,
683 BQ2415X_MASK_VI_TERM | BQ2415X_MASK_RESET,
684 BQ2415X_SHIFT_VI_TERM);
685 }
686
687 /* get termination current in mA (platform data must provide resistor sense) */
688 static int bq2415x_get_termination_current(struct bq2415x_device *bq)
689 {
690 int ret;
691
692 if (bq->init_data.resistor_sense <= 0)
693 return -ENOSYS;
694
695 ret = bq2415x_i2c_read_mask(bq, BQ2415X_REG_CURRENT,
696 BQ2415X_MASK_VI_TERM, BQ2415X_SHIFT_VI_TERM);
697 if (ret < 0)
698 return ret;
699 return (3400 + 3400*ret) / bq->init_data.resistor_sense;
700 }
701
702 /* set default value of property */
703 #define bq2415x_set_default_value(bq, prop) \
704 do { \
705 int ret = 0; \
706 if (bq->init_data.prop != -1) \
707 ret = bq2415x_set_##prop(bq, bq->init_data.prop); \
708 if (ret < 0) \
709 return ret; \
710 } while (0)
711
712 /* set default values of all properties */
713 static int bq2415x_set_defaults(struct bq2415x_device *bq)
714 {
715 bq2415x_exec_command(bq, BQ2415X_BOOST_MODE_DISABLE);
716 bq2415x_exec_command(bq, BQ2415X_CHARGER_DISABLE);
717 bq2415x_exec_command(bq, BQ2415X_CHARGE_TERMINATION_DISABLE);
718
719 bq2415x_set_default_value(bq, current_limit);
720 bq2415x_set_default_value(bq, weak_battery_voltage);
721 bq2415x_set_default_value(bq, battery_regulation_voltage);
722
723 if (bq->init_data.resistor_sense > 0) {
724 bq2415x_set_default_value(bq, charge_current);
725 bq2415x_set_default_value(bq, termination_current);
726 bq2415x_exec_command(bq, BQ2415X_CHARGE_TERMINATION_ENABLE);
727 }
728
729 bq2415x_exec_command(bq, BQ2415X_CHARGER_ENABLE);
730 return 0;
731 }
732
733 /**** charger mode functions ****/
734
735 /* set charger mode */
736 static int bq2415x_set_mode(struct bq2415x_device *bq, enum bq2415x_mode mode)
737 {
738 int ret = 0;
739 int charger = 0;
740 int boost = 0;
741
742 if (mode == BQ2415X_MODE_BOOST)
743 boost = 1;
744 else if (mode != BQ2415X_MODE_OFF)
745 charger = 1;
746
747 if (!charger)
748 ret = bq2415x_exec_command(bq, BQ2415X_CHARGER_DISABLE);
749
750 if (!boost)
751 ret = bq2415x_exec_command(bq, BQ2415X_BOOST_MODE_DISABLE);
752
753 if (ret < 0)
754 return ret;
755
756 switch (mode) {
757 case BQ2415X_MODE_OFF:
758 dev_dbg(bq->dev, "changing mode to: Offline\n");
759 ret = bq2415x_set_current_limit(bq, 100);
760 break;
761 case BQ2415X_MODE_NONE:
762 dev_dbg(bq->dev, "changing mode to: N/A\n");
763 ret = bq2415x_set_current_limit(bq, 100);
764 break;
765 case BQ2415X_MODE_HOST_CHARGER:
766 dev_dbg(bq->dev, "changing mode to: Host/HUB charger\n");
767 ret = bq2415x_set_current_limit(bq, 500);
768 break;
769 case BQ2415X_MODE_DEDICATED_CHARGER:
770 dev_dbg(bq->dev, "changing mode to: Dedicated charger\n");
771 ret = bq2415x_set_current_limit(bq, 1800);
772 break;
773 case BQ2415X_MODE_BOOST: /* Boost mode */
774 dev_dbg(bq->dev, "changing mode to: Boost\n");
775 ret = bq2415x_set_current_limit(bq, 100);
776 break;
777 }
778
779 if (ret < 0)
780 return ret;
781
782 if (charger)
783 ret = bq2415x_exec_command(bq, BQ2415X_CHARGER_ENABLE);
784 else if (boost)
785 ret = bq2415x_exec_command(bq, BQ2415X_BOOST_MODE_ENABLE);
786
787 if (ret < 0)
788 return ret;
789
790 bq2415x_set_default_value(bq, weak_battery_voltage);
791 bq2415x_set_default_value(bq, battery_regulation_voltage);
792
793 bq->mode = mode;
794 sysfs_notify(&bq->charger.dev->kobj, NULL, "mode");
795
796 return 0;
797
798 }
799
800 static int bq2415x_notifier_call(struct notifier_block *nb,
801 unsigned long val, void *v)
802 {
803 struct bq2415x_device *bq =
804 container_of(nb, struct bq2415x_device, nb);
805 struct power_supply *psy = v;
806 enum bq2415x_mode mode;
807 union power_supply_propval prop;
808 int ret;
809 int mA;
810
811 if (val != PSY_EVENT_PROP_CHANGED)
812 return NOTIFY_OK;
813
814 if (psy != bq->notify_psy)
815 return NOTIFY_OK;
816
817 dev_dbg(bq->dev, "notifier call was called\n");
818
819 ret = psy->get_property(psy, POWER_SUPPLY_PROP_CURRENT_MAX, &prop);
820 if (ret != 0)
821 return NOTIFY_OK;
822
823 mA = prop.intval;
824
825 if (mA == 0)
826 mode = BQ2415X_MODE_OFF;
827 else if (mA < 500)
828 mode = BQ2415X_MODE_NONE;
829 else if (mA < 1800)
830 mode = BQ2415X_MODE_HOST_CHARGER;
831 else
832 mode = BQ2415X_MODE_DEDICATED_CHARGER;
833
834 if (bq->reported_mode == mode)
835 return NOTIFY_OK;
836
837 bq->reported_mode = mode;
838
839 /* if automode is not enabled do not tell about reported_mode */
840 if (bq->automode < 1)
841 return NOTIFY_OK;
842
843 schedule_delayed_work(&bq->work, 0);
844
845 return NOTIFY_OK;
846 }
847
848 /**** timer functions ****/
849
850 /* enable/disable auto resetting chip timer */
851 static void bq2415x_set_autotimer(struct bq2415x_device *bq, int state)
852 {
853 mutex_lock(&bq2415x_timer_mutex);
854
855 if (bq->autotimer == state) {
856 mutex_unlock(&bq2415x_timer_mutex);
857 return;
858 }
859
860 bq->autotimer = state;
861
862 if (state) {
863 schedule_delayed_work(&bq->work, BQ2415X_TIMER_TIMEOUT * HZ);
864 bq2415x_exec_command(bq, BQ2415X_TIMER_RESET);
865 bq->timer_error = NULL;
866 } else {
867 cancel_delayed_work_sync(&bq->work);
868 }
869
870 mutex_unlock(&bq2415x_timer_mutex);
871 }
872
873 /* called by bq2415x_timer_work on timer error */
874 static void bq2415x_timer_error(struct bq2415x_device *bq, const char *msg)
875 {
876 bq->timer_error = msg;
877 sysfs_notify(&bq->charger.dev->kobj, NULL, "timer");
878 dev_err(bq->dev, "%s\n", msg);
879 if (bq->automode > 0)
880 bq->automode = 0;
881 bq2415x_set_mode(bq, BQ2415X_MODE_OFF);
882 bq2415x_set_autotimer(bq, 0);
883 }
884
885 /* delayed work function for auto resetting chip timer */
886 static void bq2415x_timer_work(struct work_struct *work)
887 {
888 struct bq2415x_device *bq = container_of(work, struct bq2415x_device,
889 work.work);
890 int ret;
891 int error;
892 int boost;
893
894 if (bq->automode > 0 && (bq->reported_mode != bq->mode)) {
895 sysfs_notify(&bq->charger.dev->kobj, NULL, "reported_mode");
896 bq2415x_set_mode(bq, bq->reported_mode);
897 }
898
899 if (!bq->autotimer)
900 return;
901
902 ret = bq2415x_exec_command(bq, BQ2415X_TIMER_RESET);
903 if (ret < 0) {
904 bq2415x_timer_error(bq, "Resetting timer failed");
905 return;
906 }
907
908 boost = bq2415x_exec_command(bq, BQ2415X_BOOST_MODE_STATUS);
909 if (boost < 0) {
910 bq2415x_timer_error(bq, "Unknown error");
911 return;
912 }
913
914 error = bq2415x_exec_command(bq, BQ2415X_FAULT_STATUS);
915 if (error < 0) {
916 bq2415x_timer_error(bq, "Unknown error");
917 return;
918 }
919
920 if (boost) {
921 switch (error) {
922 /* Non fatal errors, chip is OK */
923 case 0: /* No error */
924 break;
925 case 6: /* Timer expired */
926 dev_err(bq->dev, "Timer expired\n");
927 break;
928 case 3: /* Battery voltage too low */
929 dev_err(bq->dev, "Battery voltage to low\n");
930 break;
931
932 /* Fatal errors, disable and reset chip */
933 case 1: /* Overvoltage protection (chip fried) */
934 bq2415x_timer_error(bq,
935 "Overvoltage protection (chip fried)");
936 return;
937 case 2: /* Overload */
938 bq2415x_timer_error(bq, "Overload");
939 return;
940 case 4: /* Battery overvoltage protection */
941 bq2415x_timer_error(bq,
942 "Battery overvoltage protection");
943 return;
944 case 5: /* Thermal shutdown (too hot) */
945 bq2415x_timer_error(bq,
946 "Thermal shutdown (too hot)");
947 return;
948 case 7: /* N/A */
949 bq2415x_timer_error(bq, "Unknown error");
950 return;
951 }
952 } else {
953 switch (error) {
954 /* Non fatal errors, chip is OK */
955 case 0: /* No error */
956 break;
957 case 2: /* Sleep mode */
958 dev_err(bq->dev, "Sleep mode\n");
959 break;
960 case 3: /* Poor input source */
961 dev_err(bq->dev, "Poor input source\n");
962 break;
963 case 6: /* Timer expired */
964 dev_err(bq->dev, "Timer expired\n");
965 break;
966 case 7: /* No battery */
967 dev_err(bq->dev, "No battery\n");
968 break;
969
970 /* Fatal errors, disable and reset chip */
971 case 1: /* Overvoltage protection (chip fried) */
972 bq2415x_timer_error(bq,
973 "Overvoltage protection (chip fried)");
974 return;
975 case 4: /* Battery overvoltage protection */
976 bq2415x_timer_error(bq,
977 "Battery overvoltage protection");
978 return;
979 case 5: /* Thermal shutdown (too hot) */
980 bq2415x_timer_error(bq,
981 "Thermal shutdown (too hot)");
982 return;
983 }
984 }
985
986 schedule_delayed_work(&bq->work, BQ2415X_TIMER_TIMEOUT * HZ);
987 }
988
989 /**** power supply interface code ****/
990
991 static enum power_supply_property bq2415x_power_supply_props[] = {
992 /* TODO: maybe add more power supply properties */
993 POWER_SUPPLY_PROP_STATUS,
994 POWER_SUPPLY_PROP_MODEL_NAME,
995 };
996
997 static int bq2415x_power_supply_get_property(struct power_supply *psy,
998 enum power_supply_property psp,
999 union power_supply_propval *val)
1000 {
1001 struct bq2415x_device *bq = container_of(psy, struct bq2415x_device,
1002 charger);
1003 int ret;
1004
1005 switch (psp) {
1006 case POWER_SUPPLY_PROP_STATUS:
1007 ret = bq2415x_exec_command(bq, BQ2415X_CHARGE_STATUS);
1008 if (ret < 0)
1009 return ret;
1010 else if (ret == 0) /* Ready */
1011 val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING;
1012 else if (ret == 1) /* Charge in progress */
1013 val->intval = POWER_SUPPLY_STATUS_CHARGING;
1014 else if (ret == 2) /* Charge done */
1015 val->intval = POWER_SUPPLY_STATUS_FULL;
1016 else
1017 val->intval = POWER_SUPPLY_STATUS_UNKNOWN;
1018 break;
1019 case POWER_SUPPLY_PROP_MODEL_NAME:
1020 val->strval = bq->model;
1021 break;
1022 default:
1023 return -EINVAL;
1024 }
1025 return 0;
1026 }
1027
1028 static int bq2415x_power_supply_init(struct bq2415x_device *bq)
1029 {
1030 int ret;
1031 int chip;
1032 char revstr[8];
1033
1034 bq->charger.name = bq->name;
1035 bq->charger.type = POWER_SUPPLY_TYPE_USB;
1036 bq->charger.properties = bq2415x_power_supply_props;
1037 bq->charger.num_properties = ARRAY_SIZE(bq2415x_power_supply_props);
1038 bq->charger.get_property = bq2415x_power_supply_get_property;
1039
1040 ret = bq2415x_detect_chip(bq);
1041 if (ret < 0)
1042 chip = BQUNKNOWN;
1043 else
1044 chip = ret;
1045
1046 ret = bq2415x_detect_revision(bq);
1047 if (ret < 0)
1048 strcpy(revstr, "unknown");
1049 else
1050 sprintf(revstr, "1.%d", ret);
1051
1052 bq->model = kasprintf(GFP_KERNEL,
1053 "chip %s, revision %s, vender code %.3d",
1054 bq2415x_chip_name[chip], revstr,
1055 bq2415x_get_vender_code(bq));
1056 if (!bq->model) {
1057 dev_err(bq->dev, "failed to allocate model name\n");
1058 return -ENOMEM;
1059 }
1060
1061 ret = power_supply_register(bq->dev, &bq->charger);
1062 if (ret) {
1063 kfree(bq->model);
1064 return ret;
1065 }
1066
1067 return 0;
1068 }
1069
1070 static void bq2415x_power_supply_exit(struct bq2415x_device *bq)
1071 {
1072 bq->autotimer = 0;
1073 if (bq->automode > 0)
1074 bq->automode = 0;
1075 cancel_delayed_work_sync(&bq->work);
1076 power_supply_unregister(&bq->charger);
1077 kfree(bq->model);
1078 }
1079
1080 /**** additional sysfs entries for power supply interface ****/
1081
1082 /* show *_status entries */
1083 static ssize_t bq2415x_sysfs_show_status(struct device *dev,
1084 struct device_attribute *attr,
1085 char *buf)
1086 {
1087 struct power_supply *psy = dev_get_drvdata(dev);
1088 struct bq2415x_device *bq = container_of(psy, struct bq2415x_device,
1089 charger);
1090 enum bq2415x_command command;
1091 int ret;
1092
1093 if (strcmp(attr->attr.name, "otg_status") == 0)
1094 command = BQ2415X_OTG_STATUS;
1095 else if (strcmp(attr->attr.name, "charge_status") == 0)
1096 command = BQ2415X_CHARGE_STATUS;
1097 else if (strcmp(attr->attr.name, "boost_status") == 0)
1098 command = BQ2415X_BOOST_STATUS;
1099 else if (strcmp(attr->attr.name, "fault_status") == 0)
1100 command = BQ2415X_FAULT_STATUS;
1101 else
1102 return -EINVAL;
1103
1104 ret = bq2415x_exec_command(bq, command);
1105 if (ret < 0)
1106 return ret;
1107 return sprintf(buf, "%d\n", ret);
1108 }
1109
1110 /*
1111 * set timer entry:
1112 * auto - enable auto mode
1113 * off - disable auto mode
1114 * (other values) - reset chip timer
1115 */
1116 static ssize_t bq2415x_sysfs_set_timer(struct device *dev,
1117 struct device_attribute *attr,
1118 const char *buf,
1119 size_t count)
1120 {
1121 struct power_supply *psy = dev_get_drvdata(dev);
1122 struct bq2415x_device *bq = container_of(psy, struct bq2415x_device,
1123 charger);
1124 int ret = 0;
1125
1126 if (strncmp(buf, "auto", 4) == 0)
1127 bq2415x_set_autotimer(bq, 1);
1128 else if (strncmp(buf, "off", 3) == 0)
1129 bq2415x_set_autotimer(bq, 0);
1130 else
1131 ret = bq2415x_exec_command(bq, BQ2415X_TIMER_RESET);
1132
1133 if (ret < 0)
1134 return ret;
1135 return count;
1136 }
1137
1138 /* show timer entry (auto or off) */
1139 static ssize_t bq2415x_sysfs_show_timer(struct device *dev,
1140 struct device_attribute *attr,
1141 char *buf)
1142 {
1143 struct power_supply *psy = dev_get_drvdata(dev);
1144 struct bq2415x_device *bq = container_of(psy, struct bq2415x_device,
1145 charger);
1146
1147 if (bq->timer_error)
1148 return sprintf(buf, "%s\n", bq->timer_error);
1149
1150 if (bq->autotimer)
1151 return sprintf(buf, "auto\n");
1152 return sprintf(buf, "off\n");
1153 }
1154
1155 /*
1156 * set mode entry:
1157 * auto - if automode is supported, enable it and set mode to reported
1158 * none - disable charger and boost mode
1159 * host - charging mode for host/hub chargers (current limit 500mA)
1160 * dedicated - charging mode for dedicated chargers (unlimited current limit)
1161 * boost - disable charger and enable boost mode
1162 */
1163 static ssize_t bq2415x_sysfs_set_mode(struct device *dev,
1164 struct device_attribute *attr,
1165 const char *buf,
1166 size_t count)
1167 {
1168 struct power_supply *psy = dev_get_drvdata(dev);
1169 struct bq2415x_device *bq = container_of(psy, struct bq2415x_device,
1170 charger);
1171 enum bq2415x_mode mode;
1172 int ret = 0;
1173
1174 if (strncmp(buf, "auto", 4) == 0) {
1175 if (bq->automode < 0)
1176 return -ENOSYS;
1177 bq->automode = 1;
1178 mode = bq->reported_mode;
1179 } else if (strncmp(buf, "off", 3) == 0) {
1180 if (bq->automode > 0)
1181 bq->automode = 0;
1182 mode = BQ2415X_MODE_OFF;
1183 } else if (strncmp(buf, "none", 4) == 0) {
1184 if (bq->automode > 0)
1185 bq->automode = 0;
1186 mode = BQ2415X_MODE_NONE;
1187 } else if (strncmp(buf, "host", 4) == 0) {
1188 if (bq->automode > 0)
1189 bq->automode = 0;
1190 mode = BQ2415X_MODE_HOST_CHARGER;
1191 } else if (strncmp(buf, "dedicated", 9) == 0) {
1192 if (bq->automode > 0)
1193 bq->automode = 0;
1194 mode = BQ2415X_MODE_DEDICATED_CHARGER;
1195 } else if (strncmp(buf, "boost", 5) == 0) {
1196 if (bq->automode > 0)
1197 bq->automode = 0;
1198 mode = BQ2415X_MODE_BOOST;
1199 } else if (strncmp(buf, "reset", 5) == 0) {
1200 bq2415x_reset_chip(bq);
1201 bq2415x_set_defaults(bq);
1202 if (bq->automode <= 0)
1203 return count;
1204 bq->automode = 1;
1205 mode = bq->reported_mode;
1206 } else {
1207 return -EINVAL;
1208 }
1209
1210 ret = bq2415x_set_mode(bq, mode);
1211 if (ret < 0)
1212 return ret;
1213 return count;
1214 }
1215
1216 /* show mode entry (auto, none, host, dedicated or boost) */
1217 static ssize_t bq2415x_sysfs_show_mode(struct device *dev,
1218 struct device_attribute *attr,
1219 char *buf)
1220 {
1221 struct power_supply *psy = dev_get_drvdata(dev);
1222 struct bq2415x_device *bq = container_of(psy, struct bq2415x_device,
1223 charger);
1224 ssize_t ret = 0;
1225
1226 if (bq->automode > 0)
1227 ret += sprintf(buf+ret, "auto (");
1228
1229 switch (bq->mode) {
1230 case BQ2415X_MODE_OFF:
1231 ret += sprintf(buf+ret, "off");
1232 break;
1233 case BQ2415X_MODE_NONE:
1234 ret += sprintf(buf+ret, "none");
1235 break;
1236 case BQ2415X_MODE_HOST_CHARGER:
1237 ret += sprintf(buf+ret, "host");
1238 break;
1239 case BQ2415X_MODE_DEDICATED_CHARGER:
1240 ret += sprintf(buf+ret, "dedicated");
1241 break;
1242 case BQ2415X_MODE_BOOST:
1243 ret += sprintf(buf+ret, "boost");
1244 break;
1245 }
1246
1247 if (bq->automode > 0)
1248 ret += sprintf(buf+ret, ")");
1249
1250 ret += sprintf(buf+ret, "\n");
1251 return ret;
1252 }
1253
1254 /* show reported_mode entry (none, host, dedicated or boost) */
1255 static ssize_t bq2415x_sysfs_show_reported_mode(struct device *dev,
1256 struct device_attribute *attr,
1257 char *buf)
1258 {
1259 struct power_supply *psy = dev_get_drvdata(dev);
1260 struct bq2415x_device *bq = container_of(psy, struct bq2415x_device,
1261 charger);
1262
1263 if (bq->automode < 0)
1264 return -EINVAL;
1265
1266 switch (bq->reported_mode) {
1267 case BQ2415X_MODE_OFF:
1268 return sprintf(buf, "off\n");
1269 case BQ2415X_MODE_NONE:
1270 return sprintf(buf, "none\n");
1271 case BQ2415X_MODE_HOST_CHARGER:
1272 return sprintf(buf, "host\n");
1273 case BQ2415X_MODE_DEDICATED_CHARGER:
1274 return sprintf(buf, "dedicated\n");
1275 case BQ2415X_MODE_BOOST:
1276 return sprintf(buf, "boost\n");
1277 }
1278
1279 return -EINVAL;
1280 }
1281
1282 /* directly set raw value to chip register, format: 'register value' */
1283 static ssize_t bq2415x_sysfs_set_registers(struct device *dev,
1284 struct device_attribute *attr,
1285 const char *buf,
1286 size_t count)
1287 {
1288 struct power_supply *psy = dev_get_drvdata(dev);
1289 struct bq2415x_device *bq = container_of(psy, struct bq2415x_device,
1290 charger);
1291 ssize_t ret = 0;
1292 unsigned int reg;
1293 unsigned int val;
1294
1295 if (sscanf(buf, "%x %x", &reg, &val) != 2)
1296 return -EINVAL;
1297
1298 if (reg > 4 || val > 255)
1299 return -EINVAL;
1300
1301 ret = bq2415x_i2c_write(bq, reg, val);
1302 if (ret < 0)
1303 return ret;
1304 return count;
1305 }
1306
1307 /* print value of chip register, format: 'register=value' */
1308 static ssize_t bq2415x_sysfs_print_reg(struct bq2415x_device *bq,
1309 u8 reg,
1310 char *buf)
1311 {
1312 int ret = bq2415x_i2c_read(bq, reg);
1313
1314 if (ret < 0)
1315 return sprintf(buf, "%#.2x=error %d\n", reg, ret);
1316 return sprintf(buf, "%#.2x=%#.2x\n", reg, ret);
1317 }
1318
1319 /* show all raw values of chip register, format per line: 'register=value' */
1320 static ssize_t bq2415x_sysfs_show_registers(struct device *dev,
1321 struct device_attribute *attr,
1322 char *buf)
1323 {
1324 struct power_supply *psy = dev_get_drvdata(dev);
1325 struct bq2415x_device *bq = container_of(psy, struct bq2415x_device,
1326 charger);
1327 ssize_t ret = 0;
1328
1329 ret += bq2415x_sysfs_print_reg(bq, BQ2415X_REG_STATUS, buf+ret);
1330 ret += bq2415x_sysfs_print_reg(bq, BQ2415X_REG_CONTROL, buf+ret);
1331 ret += bq2415x_sysfs_print_reg(bq, BQ2415X_REG_VOLTAGE, buf+ret);
1332 ret += bq2415x_sysfs_print_reg(bq, BQ2415X_REG_VENDER, buf+ret);
1333 ret += bq2415x_sysfs_print_reg(bq, BQ2415X_REG_CURRENT, buf+ret);
1334 return ret;
1335 }
1336
1337 /* set current and voltage limit entries (in mA or mV) */
1338 static ssize_t bq2415x_sysfs_set_limit(struct device *dev,
1339 struct device_attribute *attr,
1340 const char *buf,
1341 size_t count)
1342 {
1343 struct power_supply *psy = dev_get_drvdata(dev);
1344 struct bq2415x_device *bq = container_of(psy, struct bq2415x_device,
1345 charger);
1346 long val;
1347 int ret;
1348
1349 if (kstrtol(buf, 10, &val) < 0)
1350 return -EINVAL;
1351
1352 if (strcmp(attr->attr.name, "current_limit") == 0)
1353 ret = bq2415x_set_current_limit(bq, val);
1354 else if (strcmp(attr->attr.name, "weak_battery_voltage") == 0)
1355 ret = bq2415x_set_weak_battery_voltage(bq, val);
1356 else if (strcmp(attr->attr.name, "battery_regulation_voltage") == 0)
1357 ret = bq2415x_set_battery_regulation_voltage(bq, val);
1358 else if (strcmp(attr->attr.name, "charge_current") == 0)
1359 ret = bq2415x_set_charge_current(bq, val);
1360 else if (strcmp(attr->attr.name, "termination_current") == 0)
1361 ret = bq2415x_set_termination_current(bq, val);
1362 else
1363 return -EINVAL;
1364
1365 if (ret < 0)
1366 return ret;
1367 return count;
1368 }
1369
1370 /* show current and voltage limit entries (in mA or mV) */
1371 static ssize_t bq2415x_sysfs_show_limit(struct device *dev,
1372 struct device_attribute *attr,
1373 char *buf)
1374 {
1375 struct power_supply *psy = dev_get_drvdata(dev);
1376 struct bq2415x_device *bq = container_of(psy, struct bq2415x_device,
1377 charger);
1378 int ret;
1379
1380 if (strcmp(attr->attr.name, "current_limit") == 0)
1381 ret = bq2415x_get_current_limit(bq);
1382 else if (strcmp(attr->attr.name, "weak_battery_voltage") == 0)
1383 ret = bq2415x_get_weak_battery_voltage(bq);
1384 else if (strcmp(attr->attr.name, "battery_regulation_voltage") == 0)
1385 ret = bq2415x_get_battery_regulation_voltage(bq);
1386 else if (strcmp(attr->attr.name, "charge_current") == 0)
1387 ret = bq2415x_get_charge_current(bq);
1388 else if (strcmp(attr->attr.name, "termination_current") == 0)
1389 ret = bq2415x_get_termination_current(bq);
1390 else
1391 return -EINVAL;
1392
1393 if (ret < 0)
1394 return ret;
1395 return sprintf(buf, "%d\n", ret);
1396 }
1397
1398 /* set *_enable entries */
1399 static ssize_t bq2415x_sysfs_set_enable(struct device *dev,
1400 struct device_attribute *attr,
1401 const char *buf,
1402 size_t count)
1403 {
1404 struct power_supply *psy = dev_get_drvdata(dev);
1405 struct bq2415x_device *bq = container_of(psy, struct bq2415x_device,
1406 charger);
1407 enum bq2415x_command command;
1408 long val;
1409 int ret;
1410
1411 if (kstrtol(buf, 10, &val) < 0)
1412 return -EINVAL;
1413
1414 if (strcmp(attr->attr.name, "charge_termination_enable") == 0)
1415 command = val ? BQ2415X_CHARGE_TERMINATION_ENABLE :
1416 BQ2415X_CHARGE_TERMINATION_DISABLE;
1417 else if (strcmp(attr->attr.name, "high_impedance_enable") == 0)
1418 command = val ? BQ2415X_HIGH_IMPEDANCE_ENABLE :
1419 BQ2415X_HIGH_IMPEDANCE_DISABLE;
1420 else if (strcmp(attr->attr.name, "otg_pin_enable") == 0)
1421 command = val ? BQ2415X_OTG_PIN_ENABLE :
1422 BQ2415X_OTG_PIN_DISABLE;
1423 else if (strcmp(attr->attr.name, "stat_pin_enable") == 0)
1424 command = val ? BQ2415X_STAT_PIN_ENABLE :
1425 BQ2415X_STAT_PIN_DISABLE;
1426 else
1427 return -EINVAL;
1428
1429 ret = bq2415x_exec_command(bq, command);
1430 if (ret < 0)
1431 return ret;
1432 return count;
1433 }
1434
1435 /* show *_enable entries */
1436 static ssize_t bq2415x_sysfs_show_enable(struct device *dev,
1437 struct device_attribute *attr,
1438 char *buf)
1439 {
1440 struct power_supply *psy = dev_get_drvdata(dev);
1441 struct bq2415x_device *bq = container_of(psy, struct bq2415x_device,
1442 charger);
1443 enum bq2415x_command command;
1444 int ret;
1445
1446 if (strcmp(attr->attr.name, "charge_termination_enable") == 0)
1447 command = BQ2415X_CHARGE_TERMINATION_STATUS;
1448 else if (strcmp(attr->attr.name, "high_impedance_enable") == 0)
1449 command = BQ2415X_HIGH_IMPEDANCE_STATUS;
1450 else if (strcmp(attr->attr.name, "otg_pin_enable") == 0)
1451 command = BQ2415X_OTG_PIN_STATUS;
1452 else if (strcmp(attr->attr.name, "stat_pin_enable") == 0)
1453 command = BQ2415X_STAT_PIN_STATUS;
1454 else
1455 return -EINVAL;
1456
1457 ret = bq2415x_exec_command(bq, command);
1458 if (ret < 0)
1459 return ret;
1460 return sprintf(buf, "%d\n", ret);
1461 }
1462
1463 static DEVICE_ATTR(current_limit, S_IWUSR | S_IRUGO,
1464 bq2415x_sysfs_show_limit, bq2415x_sysfs_set_limit);
1465 static DEVICE_ATTR(weak_battery_voltage, S_IWUSR | S_IRUGO,
1466 bq2415x_sysfs_show_limit, bq2415x_sysfs_set_limit);
1467 static DEVICE_ATTR(battery_regulation_voltage, S_IWUSR | S_IRUGO,
1468 bq2415x_sysfs_show_limit, bq2415x_sysfs_set_limit);
1469 static DEVICE_ATTR(charge_current, S_IWUSR | S_IRUGO,
1470 bq2415x_sysfs_show_limit, bq2415x_sysfs_set_limit);
1471 static DEVICE_ATTR(termination_current, S_IWUSR | S_IRUGO,
1472 bq2415x_sysfs_show_limit, bq2415x_sysfs_set_limit);
1473
1474 static DEVICE_ATTR(charge_termination_enable, S_IWUSR | S_IRUGO,
1475 bq2415x_sysfs_show_enable, bq2415x_sysfs_set_enable);
1476 static DEVICE_ATTR(high_impedance_enable, S_IWUSR | S_IRUGO,
1477 bq2415x_sysfs_show_enable, bq2415x_sysfs_set_enable);
1478 static DEVICE_ATTR(otg_pin_enable, S_IWUSR | S_IRUGO,
1479 bq2415x_sysfs_show_enable, bq2415x_sysfs_set_enable);
1480 static DEVICE_ATTR(stat_pin_enable, S_IWUSR | S_IRUGO,
1481 bq2415x_sysfs_show_enable, bq2415x_sysfs_set_enable);
1482
1483 static DEVICE_ATTR(reported_mode, S_IRUGO,
1484 bq2415x_sysfs_show_reported_mode, NULL);
1485 static DEVICE_ATTR(mode, S_IWUSR | S_IRUGO,
1486 bq2415x_sysfs_show_mode, bq2415x_sysfs_set_mode);
1487 static DEVICE_ATTR(timer, S_IWUSR | S_IRUGO,
1488 bq2415x_sysfs_show_timer, bq2415x_sysfs_set_timer);
1489
1490 static DEVICE_ATTR(registers, S_IWUSR | S_IRUGO,
1491 bq2415x_sysfs_show_registers, bq2415x_sysfs_set_registers);
1492
1493 static DEVICE_ATTR(otg_status, S_IRUGO, bq2415x_sysfs_show_status, NULL);
1494 static DEVICE_ATTR(charge_status, S_IRUGO, bq2415x_sysfs_show_status, NULL);
1495 static DEVICE_ATTR(boost_status, S_IRUGO, bq2415x_sysfs_show_status, NULL);
1496 static DEVICE_ATTR(fault_status, S_IRUGO, bq2415x_sysfs_show_status, NULL);
1497
1498 static struct attribute *bq2415x_sysfs_attributes[] = {
1499 /*
1500 * TODO: some (appropriate) of these attrs should be switched to
1501 * use power supply class props.
1502 */
1503 &dev_attr_current_limit.attr,
1504 &dev_attr_weak_battery_voltage.attr,
1505 &dev_attr_battery_regulation_voltage.attr,
1506 &dev_attr_charge_current.attr,
1507 &dev_attr_termination_current.attr,
1508
1509 &dev_attr_charge_termination_enable.attr,
1510 &dev_attr_high_impedance_enable.attr,
1511 &dev_attr_otg_pin_enable.attr,
1512 &dev_attr_stat_pin_enable.attr,
1513
1514 &dev_attr_reported_mode.attr,
1515 &dev_attr_mode.attr,
1516 &dev_attr_timer.attr,
1517
1518 &dev_attr_registers.attr,
1519
1520 &dev_attr_otg_status.attr,
1521 &dev_attr_charge_status.attr,
1522 &dev_attr_boost_status.attr,
1523 &dev_attr_fault_status.attr,
1524 NULL,
1525 };
1526
1527 static const struct attribute_group bq2415x_sysfs_attr_group = {
1528 .attrs = bq2415x_sysfs_attributes,
1529 };
1530
1531 static int bq2415x_sysfs_init(struct bq2415x_device *bq)
1532 {
1533 return sysfs_create_group(&bq->charger.dev->kobj,
1534 &bq2415x_sysfs_attr_group);
1535 }
1536
1537 static void bq2415x_sysfs_exit(struct bq2415x_device *bq)
1538 {
1539 sysfs_remove_group(&bq->charger.dev->kobj, &bq2415x_sysfs_attr_group);
1540 }
1541
1542 /* main bq2415x probe function */
1543 static int bq2415x_probe(struct i2c_client *client,
1544 const struct i2c_device_id *id)
1545 {
1546 int ret;
1547 int num;
1548 char *name;
1549 struct bq2415x_device *bq;
1550 struct device_node *np = client->dev.of_node;
1551 struct bq2415x_platform_data *pdata = client->dev.platform_data;
1552
1553 if (!np && !pdata) {
1554 dev_err(&client->dev, "platform data missing\n");
1555 return -ENODEV;
1556 }
1557
1558 /* Get new ID for the new device */
1559 mutex_lock(&bq2415x_id_mutex);
1560 num = idr_alloc(&bq2415x_id, client, 0, 0, GFP_KERNEL);
1561 mutex_unlock(&bq2415x_id_mutex);
1562 if (num < 0)
1563 return num;
1564
1565 name = kasprintf(GFP_KERNEL, "%s-%d", id->name, num);
1566 if (!name) {
1567 dev_err(&client->dev, "failed to allocate device name\n");
1568 ret = -ENOMEM;
1569 goto error_1;
1570 }
1571
1572 bq = devm_kzalloc(&client->dev, sizeof(*bq), GFP_KERNEL);
1573 if (!bq) {
1574 dev_err(&client->dev, "failed to allocate device data\n");
1575 ret = -ENOMEM;
1576 goto error_2;
1577 }
1578
1579 if (np) {
1580 bq->notify_psy = power_supply_get_by_phandle(np, "ti,usb-charger-detection");
1581
1582 if (!bq->notify_psy)
1583 return -EPROBE_DEFER;
1584 }
1585 else if (pdata->notify_device)
1586 bq->notify_psy = power_supply_get_by_name(pdata->notify_device);
1587 else
1588 bq->notify_psy = NULL;
1589
1590 i2c_set_clientdata(client, bq);
1591
1592 bq->id = num;
1593 bq->dev = &client->dev;
1594 bq->chip = id->driver_data;
1595 bq->name = name;
1596 bq->mode = BQ2415X_MODE_OFF;
1597 bq->reported_mode = BQ2415X_MODE_OFF;
1598 bq->autotimer = 0;
1599 bq->automode = 0;
1600
1601 if (np) {
1602 ret = of_property_read_u32(np, "ti,current-limit",
1603 &bq->init_data.current_limit);
1604 if (ret)
1605 return ret;
1606 ret = of_property_read_u32(np, "ti,weak-battery-voltage",
1607 &bq->init_data.weak_battery_voltage);
1608 if (ret)
1609 return ret;
1610 ret = of_property_read_u32(np, "ti,battery-regulation-voltage",
1611 &bq->init_data.battery_regulation_voltage);
1612 if (ret)
1613 return ret;
1614 ret = of_property_read_u32(np, "ti,charge-current",
1615 &bq->init_data.charge_current);
1616 if (ret)
1617 return ret;
1618 ret = of_property_read_u32(np, "ti,termination-current",
1619 &bq->init_data.termination_current);
1620 if (ret)
1621 return ret;
1622 ret = of_property_read_u32(np, "ti,resistor-sense",
1623 &bq->init_data.resistor_sense);
1624 if (ret)
1625 return ret;
1626 } else {
1627 memcpy(&bq->init_data, pdata, sizeof(bq->init_data));
1628 }
1629
1630 bq2415x_reset_chip(bq);
1631
1632 ret = bq2415x_power_supply_init(bq);
1633 if (ret) {
1634 dev_err(bq->dev, "failed to register power supply: %d\n", ret);
1635 goto error_2;
1636 }
1637
1638 ret = bq2415x_sysfs_init(bq);
1639 if (ret) {
1640 dev_err(bq->dev, "failed to create sysfs entries: %d\n", ret);
1641 goto error_3;
1642 }
1643
1644 ret = bq2415x_set_defaults(bq);
1645 if (ret) {
1646 dev_err(bq->dev, "failed to set default values: %d\n", ret);
1647 goto error_4;
1648 }
1649
1650 if (bq->notify_psy) {
1651 bq->nb.notifier_call = bq2415x_notifier_call;
1652 ret = power_supply_reg_notifier(&bq->nb);
1653 if (ret) {
1654 dev_err(bq->dev, "failed to reg notifier: %d\n", ret);
1655 goto error_5;
1656 }
1657
1658 /* Query for initial reported_mode and set it */
1659 bq2415x_notifier_call(&bq->nb, PSY_EVENT_PROP_CHANGED, bq->notify_psy);
1660 bq2415x_set_mode(bq, bq->reported_mode);
1661
1662 bq->automode = 1;
1663 dev_info(bq->dev, "automode enabled\n");
1664 } else {
1665 bq->automode = -1;
1666 dev_info(bq->dev, "automode not supported\n");
1667 }
1668
1669 INIT_DELAYED_WORK(&bq->work, bq2415x_timer_work);
1670 bq2415x_set_autotimer(bq, 1);
1671
1672 dev_info(bq->dev, "driver registered\n");
1673 return 0;
1674
1675 error_5:
1676 error_4:
1677 bq2415x_sysfs_exit(bq);
1678 error_3:
1679 bq2415x_power_supply_exit(bq);
1680 error_2:
1681 kfree(name);
1682 error_1:
1683 mutex_lock(&bq2415x_id_mutex);
1684 idr_remove(&bq2415x_id, num);
1685 mutex_unlock(&bq2415x_id_mutex);
1686
1687 return ret;
1688 }
1689
1690 /* main bq2415x remove function */
1691
1692 static int bq2415x_remove(struct i2c_client *client)
1693 {
1694 struct bq2415x_device *bq = i2c_get_clientdata(client);
1695
1696 if (bq->notify_psy)
1697 power_supply_unreg_notifier(&bq->nb);
1698
1699 bq2415x_sysfs_exit(bq);
1700 bq2415x_power_supply_exit(bq);
1701
1702 bq2415x_reset_chip(bq);
1703
1704 mutex_lock(&bq2415x_id_mutex);
1705 idr_remove(&bq2415x_id, bq->id);
1706 mutex_unlock(&bq2415x_id_mutex);
1707
1708 dev_info(bq->dev, "driver unregistered\n");
1709
1710 kfree(bq->name);
1711
1712 return 0;
1713 }
1714
1715 static const struct i2c_device_id bq2415x_i2c_id_table[] = {
1716 { "bq2415x", BQUNKNOWN },
1717 { "bq24150", BQ24150 },
1718 { "bq24150a", BQ24150A },
1719 { "bq24151", BQ24151 },
1720 { "bq24151a", BQ24151A },
1721 { "bq24152", BQ24152 },
1722 { "bq24153", BQ24153 },
1723 { "bq24153a", BQ24153A },
1724 { "bq24155", BQ24155 },
1725 { "bq24156", BQ24156 },
1726 { "bq24156a", BQ24156A },
1727 { "bq24158", BQ24158 },
1728 {},
1729 };
1730 MODULE_DEVICE_TABLE(i2c, bq2415x_i2c_id_table);
1731
1732 static struct i2c_driver bq2415x_driver = {
1733 .driver = {
1734 .name = "bq2415x-charger",
1735 },
1736 .probe = bq2415x_probe,
1737 .remove = bq2415x_remove,
1738 .id_table = bq2415x_i2c_id_table,
1739 };
1740 module_i2c_driver(bq2415x_driver);
1741
1742 MODULE_AUTHOR("Pali Rohár <pali.rohar@gmail.com>");
1743 MODULE_DESCRIPTION("bq2415x charger driver");
1744 MODULE_LICENSE("GPL");
Linux kernel - Deliverables
This page took 0.073164 seconds and 5 git commands to generate.