pwm: Add PWM driver for OMAP using dual-mode timers
[deliverable/linux.git] / drivers / pwm / Kconfig
1 menuconfig PWM
2 bool "Pulse-Width Modulation (PWM) Support"
3 help
4 Generic Pulse-Width Modulation (PWM) support.
5
6 In Pulse-Width Modulation, a variation of the width of pulses
7 in a rectangular pulse signal is used as a means to alter the
8 average power of the signal. Applications include efficient
9 power delivery and voltage regulation. In computer systems,
10 PWMs are commonly used to control fans or the brightness of
11 display backlights.
12
13 This framework provides a generic interface to PWM devices
14 within the Linux kernel. On the driver side it provides an API
15 to register and unregister a PWM chip, an abstraction of a PWM
16 controller, that supports one or more PWM devices. Client
17 drivers can request PWM devices and use the generic framework
18 to configure as well as enable and disable them.
19
20 This generic framework replaces the legacy PWM framework which
21 allows only a single driver implementing the required API. Not
22 all legacy implementations have been ported to the framework
23 yet. The framework provides an API that is backward compatible
24 with the legacy framework so that existing client drivers
25 continue to work as expected.
26
27 If unsure, say no.
28
29 if PWM
30
31 config PWM_SYSFS
32 bool
33 default y if SYSFS
34
35 config PWM_AB8500
36 tristate "AB8500 PWM support"
37 depends on AB8500_CORE && ARCH_U8500
38 help
39 Generic PWM framework driver for Analog Baseband AB8500.
40
41 To compile this driver as a module, choose M here: the module
42 will be called pwm-ab8500.
43
44 config PWM_ATMEL
45 tristate "Atmel PWM support"
46 depends on ARCH_AT91 || AVR32
47 help
48 Generic PWM framework driver for Atmel SoC.
49
50 To compile this driver as a module, choose M here: the module
51 will be called pwm-atmel.
52
53 config PWM_ATMEL_HLCDC_PWM
54 tristate "Atmel HLCDC PWM support"
55 depends on MFD_ATMEL_HLCDC
56 depends on HAVE_CLK
57 help
58 Generic PWM framework driver for the PWM output of the HLCDC
59 (Atmel High-end LCD Controller). This PWM output is mainly used
60 to control the LCD backlight.
61
62 To compile this driver as a module, choose M here: the module
63 will be called pwm-atmel-hlcdc.
64
65 config PWM_ATMEL_TCB
66 tristate "Atmel TC Block PWM support"
67 depends on ATMEL_TCLIB && OF
68 help
69 Generic PWM framework driver for Atmel Timer Counter Block.
70
71 A Timer Counter Block provides 6 PWM devices grouped by 2.
72 Devices in a given group must have the same period.
73
74 To compile this driver as a module, choose M here: the module
75 will be called pwm-atmel-tcb.
76
77 config PWM_BCM_KONA
78 tristate "Kona PWM support"
79 depends on ARCH_BCM_MOBILE
80 help
81 Generic PWM framework driver for Broadcom Kona PWM block.
82
83 To compile this driver as a module, choose M here: the module
84 will be called pwm-bcm-kona.
85
86 config PWM_BCM2835
87 tristate "BCM2835 PWM support"
88 depends on ARCH_BCM2835
89 help
90 PWM framework driver for BCM2835 controller (Raspberry Pi)
91
92 To compile this driver as a module, choose M here: the module
93 will be called pwm-bcm2835.
94
95 config PWM_BERLIN
96 tristate "Marvell Berlin PWM support"
97 depends on ARCH_BERLIN
98 help
99 PWM framework driver for Marvell Berlin SoCs.
100
101 To compile this driver as a module, choose M here: the module
102 will be called pwm-berlin.
103
104 config PWM_BFIN
105 tristate "Blackfin PWM support"
106 depends on BFIN_GPTIMERS
107 help
108 Generic PWM framework driver for Blackfin.
109
110 To compile this driver as a module, choose M here: the module
111 will be called pwm-bfin.
112
113 config PWM_BRCMSTB
114 tristate "Broadcom STB PWM support"
115 depends on ARCH_BRCMSTB || BMIPS_GENERIC
116 help
117 Generic PWM framework driver for the Broadcom Set-top-Box
118 SoCs (BCM7xxx).
119
120 To compile this driver as a module, choose M Here: the module
121 will be called pwm-brcmstb.c.
122
123 config PWM_CLPS711X
124 tristate "CLPS711X PWM support"
125 depends on ARCH_CLPS711X || COMPILE_TEST
126 depends on HAS_IOMEM
127 help
128 Generic PWM framework driver for Cirrus Logic CLPS711X.
129
130 To compile this driver as a module, choose M here: the module
131 will be called pwm-clps711x.
132
133 config PWM_CRC
134 bool "Intel Crystalcove (CRC) PWM support"
135 depends on X86 && INTEL_SOC_PMIC
136 help
137 Generic PWM framework driver for Crystalcove (CRC) PMIC based PWM
138 control.
139
140 config PWM_EP93XX
141 tristate "Cirrus Logic EP93xx PWM support"
142 depends on ARCH_EP93XX
143 help
144 Generic PWM framework driver for Cirrus Logic EP93xx.
145
146 To compile this driver as a module, choose M here: the module
147 will be called pwm-ep93xx.
148
149 config PWM_FSL_FTM
150 tristate "Freescale FlexTimer Module (FTM) PWM support"
151 depends on OF
152 select REGMAP_MMIO
153 help
154 Generic FTM PWM framework driver for Freescale VF610 and
155 Layerscape LS-1 SoCs.
156
157 To compile this driver as a module, choose M here: the module
158 will be called pwm-fsl-ftm.
159
160 config PWM_IMG
161 tristate "Imagination Technologies PWM driver"
162 depends on HAS_IOMEM
163 depends on MFD_SYSCON
164 depends on COMMON_CLK
165 depends on MIPS || COMPILE_TEST
166 help
167 Generic PWM framework driver for Imagination Technologies
168 PWM block which supports 4 channels.
169
170 To compile this driver as a module, choose M here: the module
171 will be called pwm-img
172
173 config PWM_IMX
174 tristate "i.MX PWM support"
175 depends on ARCH_MXC
176 help
177 Generic PWM framework driver for i.MX.
178
179 To compile this driver as a module, choose M here: the module
180 will be called pwm-imx.
181
182 config PWM_JZ4740
183 tristate "Ingenic JZ4740 PWM support"
184 depends on MACH_JZ4740
185 help
186 Generic PWM framework driver for Ingenic JZ4740 based
187 machines.
188
189 To compile this driver as a module, choose M here: the module
190 will be called pwm-jz4740.
191
192 config PWM_LP3943
193 tristate "TI/National Semiconductor LP3943 PWM support"
194 depends on MFD_LP3943
195 help
196 Generic PWM framework driver for LP3943 which supports two PWM
197 channels.
198
199 To compile this driver as a module, choose M here: the module
200 will be called pwm-lp3943.
201
202 config PWM_LPC18XX_SCT
203 tristate "LPC18xx/43xx PWM/SCT support"
204 depends on ARCH_LPC18XX
205 help
206 Generic PWM framework driver for NXP LPC18xx PWM/SCT which
207 supports 16 channels.
208 A maximum of 15 channels can be requested simultaneously and
209 must have the same period.
210
211 To compile this driver as a module, choose M here: the module
212 will be called pwm-lpc18xx-sct.
213
214 config PWM_LPC32XX
215 tristate "LPC32XX PWM support"
216 depends on ARCH_LPC32XX
217 help
218 Generic PWM framework driver for LPC32XX. The LPC32XX SOC has two
219 PWM controllers.
220
221 To compile this driver as a module, choose M here: the module
222 will be called pwm-lpc32xx.
223
224 config PWM_LPSS
225 tristate
226
227 config PWM_LPSS_PCI
228 tristate "Intel LPSS PWM PCI driver"
229 depends on X86 && PCI
230 select PWM_LPSS
231 help
232 The PCI driver for Intel Low Power Subsystem PWM controller.
233
234 To compile this driver as a module, choose M here: the module
235 will be called pwm-lpss-pci.
236
237 config PWM_LPSS_PLATFORM
238 tristate "Intel LPSS PWM platform driver"
239 depends on X86 && ACPI
240 select PWM_LPSS
241 help
242 The platform driver for Intel Low Power Subsystem PWM controller.
243
244 To compile this driver as a module, choose M here: the module
245 will be called pwm-lpss-platform.
246
247 config PWM_MTK_DISP
248 tristate "MediaTek display PWM driver"
249 depends on ARCH_MEDIATEK || COMPILE_TEST
250 depends on HAS_IOMEM
251 help
252 Generic PWM framework driver for MediaTek disp-pwm device.
253 The PWM is used to control the backlight brightness for display.
254
255 To compile this driver as a module, choose M here: the module
256 will be called pwm-mtk-disp.
257
258 config PWM_MXS
259 tristate "Freescale MXS PWM support"
260 depends on ARCH_MXS && OF
261 select STMP_DEVICE
262 help
263 Generic PWM framework driver for Freescale MXS.
264
265 To compile this driver as a module, choose M here: the module
266 will be called pwm-mxs.
267
268 config PWM_OMAP_DMTIMER
269 tristate "OMAP Dual-Mode Timer PWM support"
270 depends on OF && ARCH_OMAP && OMAP_DM_TIMER
271 help
272 Generic PWM framework driver for OMAP Dual-Mode Timer PWM output
273
274 To compile this driver as a module, choose M here: the module
275 will be called pwm-omap-dmtimer
276
277 config PWM_PCA9685
278 tristate "NXP PCA9685 PWM driver"
279 depends on I2C
280 select REGMAP_I2C
281 help
282 Generic PWM framework driver for NXP PCA9685 LED controller.
283
284 To compile this driver as a module, choose M here: the module
285 will be called pwm-pca9685.
286
287 config PWM_PUV3
288 tristate "PKUnity NetBook-0916 PWM support"
289 depends on ARCH_PUV3
290 help
291 Generic PWM framework driver for PKUnity NetBook-0916.
292
293 To compile this driver as a module, choose M here: the module
294 will be called pwm-puv3.
295
296 config PWM_PXA
297 tristate "PXA PWM support"
298 depends on ARCH_PXA
299 help
300 Generic PWM framework driver for PXA.
301
302 To compile this driver as a module, choose M here: the module
303 will be called pwm-pxa.
304
305 config PWM_RCAR
306 tristate "Renesas R-Car PWM support"
307 depends on ARCH_RCAR_GEN1 || ARCH_RCAR_GEN2 || COMPILE_TEST
308 depends on HAS_IOMEM
309 help
310 This driver exposes the PWM Timer controller found in Renesas
311 R-Car chips through the PWM API.
312
313 To compile this driver as a module, choose M here: the module
314 will be called pwm-rcar.
315
316 config PWM_RENESAS_TPU
317 tristate "Renesas TPU PWM support"
318 depends on ARCH_SHMOBILE || COMPILE_TEST
319 depends on HAS_IOMEM
320 help
321 This driver exposes the Timer Pulse Unit (TPU) PWM controller found
322 in Renesas chips through the PWM API.
323
324 To compile this driver as a module, choose M here: the module
325 will be called pwm-renesas-tpu.
326
327 config PWM_ROCKCHIP
328 tristate "Rockchip PWM support"
329 depends on ARCH_ROCKCHIP
330 help
331 Generic PWM framework driver for the PWM controller found on
332 Rockchip SoCs.
333
334 config PWM_SAMSUNG
335 tristate "Samsung PWM support"
336 depends on PLAT_SAMSUNG || ARCH_EXYNOS
337 help
338 Generic PWM framework driver for Samsung.
339
340 To compile this driver as a module, choose M here: the module
341 will be called pwm-samsung.
342
343 config PWM_SPEAR
344 tristate "STMicroelectronics SPEAr PWM support"
345 depends on PLAT_SPEAR
346 depends on OF
347 help
348 Generic PWM framework driver for the PWM controller on ST
349 SPEAr SoCs.
350
351 To compile this driver as a module, choose M here: the module
352 will be called pwm-spear.
353
354 config PWM_STI
355 tristate "STiH4xx PWM support"
356 depends on ARCH_STI
357 depends on OF
358 help
359 Generic PWM framework driver for STiH4xx SoCs.
360
361 To compile this driver as a module, choose M here: the module
362 will be called pwm-sti.
363
364 config PWM_SUN4I
365 tristate "Allwinner PWM support"
366 depends on ARCH_SUNXI || COMPILE_TEST
367 depends on HAS_IOMEM && COMMON_CLK
368 help
369 Generic PWM framework driver for Allwinner SoCs.
370
371 To compile this driver as a module, choose M here: the module
372 will be called pwm-sun4i.
373
374 config PWM_TEGRA
375 tristate "NVIDIA Tegra PWM support"
376 depends on ARCH_TEGRA
377 help
378 Generic PWM framework driver for the PWFM controller found on NVIDIA
379 Tegra SoCs.
380
381 To compile this driver as a module, choose M here: the module
382 will be called pwm-tegra.
383
384 config PWM_TIECAP
385 tristate "ECAP PWM support"
386 depends on ARCH_OMAP2PLUS || ARCH_DAVINCI_DA8XX
387 help
388 PWM driver support for the ECAP APWM controller found on AM33XX
389 TI SOC
390
391 To compile this driver as a module, choose M here: the module
392 will be called pwm-tiecap.
393
394 config PWM_TIEHRPWM
395 tristate "EHRPWM PWM support"
396 depends on ARCH_OMAP2PLUS || ARCH_DAVINCI_DA8XX
397 help
398 PWM driver support for the EHRPWM controller found on AM33XX
399 TI SOC
400
401 To compile this driver as a module, choose M here: the module
402 will be called pwm-tiehrpwm.
403
404 config PWM_TIPWMSS
405 bool
406 default y if (ARCH_OMAP2PLUS) && (PWM_TIECAP || PWM_TIEHRPWM)
407 help
408 PWM Subsystem driver support for AM33xx SOC.
409
410 PWM submodules require PWM config space access from submodule
411 drivers and require common parent driver support.
412
413 config PWM_TWL
414 tristate "TWL4030/6030 PWM support"
415 depends on TWL4030_CORE
416 help
417 Generic PWM framework driver for TWL4030/6030.
418
419 To compile this driver as a module, choose M here: the module
420 will be called pwm-twl.
421
422 config PWM_TWL_LED
423 tristate "TWL4030/6030 PWM support for LED drivers"
424 depends on TWL4030_CORE
425 help
426 Generic PWM framework driver for TWL4030/6030 LED terminals.
427
428 To compile this driver as a module, choose M here: the module
429 will be called pwm-twl-led.
430
431 config PWM_VT8500
432 tristate "vt8500 PWM support"
433 depends on ARCH_VT8500
434 help
435 Generic PWM framework driver for vt8500.
436
437 To compile this driver as a module, choose M here: the module
438 will be called pwm-vt8500.
439
440 endif
This page took 0.041334 seconds and 6 git commands to generate.