drivers/regulator/Kconfig

   1 menuconfig REGULATOR
   2         bool "Voltage and Current Regulator Support"
   3         help
   4           Generic Voltage and Current Regulator support.
   5
   6           This framework is designed to provide a generic interface to voltage
   7           and current regulators within the Linux kernel. It's intended to
   8           provide voltage and current control to client or consumer drivers and
   9           also provide status information to user space applications through a
  10           sysfs interface.
  11
  12           The intention is to allow systems to dynamically control regulator
  13           output in order to save power and prolong battery life. This applies
  14           to both voltage regulators (where voltage output is controllable) and
  15           current sinks (where current output is controllable).
  16
  17           This framework safely compiles out if not selected so that client
  18           drivers can still be used in systems with no software controllable
  19           regulators.
  20
  21           If unsure, say no.
  22
  23
  24 if REGULATOR
  25
  26 config REGULATOR_DEBUG
  27         bool "Regulator debug support"
  28         help
  29           Say yes here to enable debugging support.
  30
  31 config REGULATOR_FIXED_VOLTAGE
  32         tristate "Fixed voltage regulator support"
  33         help
  34           This driver provides support for fixed voltage regulators,
  35           useful for systems which use a combination of software
  36           managed regulators and simple non-configurable regulators.
  37
  38 config REGULATOR_VIRTUAL_CONSUMER
  39         tristate "Virtual regulator consumer support"
  40         help
  41           This driver provides a virtual consumer for the voltage and
  42           current regulator API which provides sysfs controls for
  43           configuring the supplies requested.  This is mainly useful
  44           for test purposes.
  45
  46           If unsure, say no.
  47
  48 config REGULATOR_USERSPACE_CONSUMER
  49         tristate "Userspace regulator consumer support"
  50         help
  51           There are some classes of devices that are controlled entirely
  52           from user space. Userspace consumer driver provides ability to
  53           control power supplies for such devices.
  54
  55           If unsure, say no.
  56
  57 config REGULATOR_88PM800
  58         tristate "Marvell 88PM800 Power regulators"
  59         depends on MFD_88PM800
  60         help
  61           This driver supports Marvell 88PM800 voltage regulator chips.
  62           It delivers digitally programmable output,
  63           the voltage is programmed via I2C interface.
  64           It's suitable to support PXA988 chips to control VCC_MAIN and
  65           various voltages.
  66
  67 config REGULATOR_88PM8607
  68         tristate "Marvell 88PM8607 Power regulators"
  69         depends on MFD_88PM860X=y
  70         help
  71           This driver supports 88PM8607 voltage regulator chips.
  72
  73 config REGULATOR_ACT8865
  74         tristate "Active-semi act8865 voltage regulator"
  75         depends on I2C
  76         select REGMAP_I2C
  77         help
  78           This driver controls a active-semi act8865 voltage output
  79           regulator via I2C bus.
  80
  81 config REGULATOR_AD5398
  82         tristate "Analog Devices AD5398/AD5821 regulators"
  83         depends on I2C
  84         help
  85           This driver supports AD5398 and AD5821 current regulator chips.
  86           If building into module, its name is ad5398.ko.
  87
  88 config REGULATOR_ANATOP
  89         tristate "Freescale i.MX on-chip ANATOP LDO regulators"
  90         depends on MFD_SYSCON
  91         help
  92           Say y here to support Freescale i.MX on-chip ANATOP LDOs
  93           regulators. It is recommended that this option be
  94           enabled on i.MX6 platform.
  95
  96 config REGULATOR_AAT2870
  97         tristate "AnalogicTech AAT2870 Regulators"
  98         depends on MFD_AAT2870_CORE
  99         help
 100           If you have a AnalogicTech AAT2870 say Y to enable the
 101           regulator driver.
 102
 103 config REGULATOR_AB3100
 104         tristate "ST-Ericsson AB3100 Regulator functions"
 105         depends on AB3100_CORE
 106         default y if AB3100_CORE
 107         help
 108          These regulators correspond to functionality in the
 109          AB3100 analog baseband dealing with power regulators
 110          for the system.
 111
 112 config REGULATOR_AB8500
 113         bool "ST-Ericsson AB8500 Power Regulators"
 114         depends on AB8500_CORE
 115         help
 116           This driver supports the regulators found on the ST-Ericsson mixed
 117           signal AB8500 PMIC
 118
 119 config REGULATOR_ARIZONA
 120         tristate "Wolfson Arizona class devices"
 121         depends on MFD_ARIZONA
 122         depends on SND_SOC
 123         help
 124           Support for the regulators found on Wolfson Arizona class
 125           devices.
 126
 127 config REGULATOR_AS3711
 128         tristate "AS3711 PMIC"
 129         depends on MFD_AS3711
 130         help
 131           This driver provides support for the voltage regulators on the
 132           AS3711 PMIC
 133
 134 config REGULATOR_AS3722
 135         tristate "AMS AS3722 PMIC Regulators"
 136         depends on MFD_AS3722
 137         help
 138           This driver provides support for the voltage regulators on the
 139           AS3722 PMIC. This will enable support for all the software
 140           controllable DCDC/LDO regulators.
 141
 142 config REGULATOR_AXP20X
 143         tristate "X-POWERS AXP20X PMIC Regulators"
 144         depends on MFD_AXP20X
 145         help
 146           This driver provides support for the voltage regulators on the
 147           AXP20X PMIC.
 148
 149 config REGULATOR_BCM590XX
 150         tristate "Broadcom BCM590xx PMU Regulators"
 151         depends on MFD_BCM590XX
 152         help
 153           This driver provides support for the voltage regulators on the
 154           BCM590xx PMUs. This will enable support for the software
 155           controllable LDO/Switching regulators.
 156
 157 config REGULATOR_DA903X
 158         tristate "Dialog Semiconductor DA9030/DA9034 regulators"
 159         depends on PMIC_DA903X
 160         help
 161           Say y here to support the BUCKs and LDOs regulators found on
 162           Dialog Semiconductor DA9030/DA9034 PMIC.
 163
 164 config REGULATOR_DA9052
 165         tristate "Dialog Semiconductor DA9052/DA9053 regulators"
 166         depends on PMIC_DA9052
 167         help
 168           This driver supports the voltage regulators of DA9052-BC and
 169           DA9053-AA/Bx PMIC.
 170
 171 config REGULATOR_DA9055
 172         tristate "Dialog Semiconductor DA9055 regulators"
 173         depends on MFD_DA9055
 174         help
 175           Say y here to support the BUCKs and LDOs regulators found on
 176           Dialog Semiconductor DA9055 PMIC.
 177
 178           This driver can also be built as a module. If so, the module
 179           will be called da9055-regulator.
 180
 181 config REGULATOR_DA9062
 182         tristate "Dialog Semiconductor DA9062 regulators"
 183         depends on MFD_DA9062
 184         help
 185           Say y here to support the BUCKs and LDOs regulators found on
 186           DA9062 PMICs.
 187
 188           This driver can also be built as a module. If so, the module
 189           will be called da9062-regulator.
 190
 191 config REGULATOR_DA9063
 192         tristate "Dialog Semiconductor DA9063 regulators"
 193         depends on MFD_DA9063
 194         help
 195           Say y here to support the BUCKs and LDOs regulators found on
 196           DA9063 PMICs.
 197
 198           This driver can also be built as a module. If so, the module
 199           will be called da9063-regulator.
 200
 201 config REGULATOR_DA9210
 202         tristate "Dialog Semiconductor DA9210 regulator"
 203         depends on I2C
 204         select REGMAP_I2C
 205         help
 206           Say y here to support for the Dialog Semiconductor DA9210.
 207           The DA9210 is a multi-phase synchronous step down
 208           converter 12A DC-DC Buck controlled through an I2C
 209           interface.
 210
 211 config REGULATOR_DA9211
 212         tristate "Dialog Semiconductor DA9211/DA9212/DA9213/DA9214 regulator"
 213         depends on I2C
 214         select REGMAP_I2C
 215         help
 216           Say y here to support for the Dialog Semiconductor DA9211/DA9212
 217           /DA9213/DA9214.
 218           The DA9211/DA9212/DA9213/DA9214 is a multi-phase synchronous
 219           step down converter 12A or 16A DC-DC Buck controlled through an I2C
 220           interface.
 221
 222 config REGULATOR_DBX500_PRCMU
 223         bool
 224
 225 config REGULATOR_DB8500_PRCMU
 226         bool "ST-Ericsson DB8500 Voltage Domain Regulators"
 227         depends on MFD_DB8500_PRCMU
 228         select REGULATOR_DBX500_PRCMU
 229         help
 230           This driver supports the voltage domain regulators controlled by the
 231           DB8500 PRCMU
 232
 233 config REGULATOR_FAN53555
 234         tristate "Fairchild FAN53555 Regulator"
 235         depends on I2C
 236         select REGMAP_I2C
 237         help
 238           This driver supports Fairchild FAN53555 Digitally Programmable
 239           TinyBuck Regulator. The FAN53555 is a step-down switching voltage
 240           regulator that delivers a digitally programmable output from an
 241           input voltage supply of 2.5V to 5.5V. The output voltage is
 242           programmed through an I2C interface.
 243
 244 config REGULATOR_GPIO
 245         tristate "GPIO regulator support"
 246         depends on GPIOLIB || COMPILE_TEST
 247         help
 248           This driver provides support for regulators that can be
 249           controlled via gpios.
 250           It is capable of supporting current and voltage regulators
 251           and the platform has to provide a mapping of GPIO-states
 252           to target volts/amps.
 253
 254 config REGULATOR_HI6421
 255         tristate "HiSilicon Hi6421 PMIC voltage regulator support"
 256         depends on MFD_HI6421_PMIC && OF
 257         help
 258           This driver provides support for the voltage regulators on the
 259           HiSilicon Hi6421 PMU / Codec IC.
 260           Hi6421 is a multi-function device which, on regulator part, provides
 261           21 general purpose LDOs, 3 dedicated LDOs, and 5 BUCKs. All
 262           of them come with support to either ECO (idle) or sleep mode.
 263
 264 config REGULATOR_ISL9305
 265         tristate "Intersil ISL9305 regulator"
 266         depends on I2C
 267         select REGMAP_I2C
 268         help
 269           This driver supports ISL9305 voltage regulator chip.
 270
 271 config REGULATOR_ISL6271A
 272         tristate "Intersil ISL6271A Power regulator"
 273         depends on I2C
 274         help
 275           This driver supports ISL6271A voltage regulator chip.
 276
 277 config REGULATOR_LP3971
 278         tristate "National Semiconductors LP3971 PMIC regulator driver"
 279         depends on I2C
 280         help
 281          Say Y here to support the voltage regulators and convertors
 282          on National Semiconductors LP3971 PMIC
 283
 284 config REGULATOR_LP3972
 285         tristate "National Semiconductors LP3972 PMIC regulator driver"
 286         depends on I2C
 287         help
 288          Say Y here to support the voltage regulators and convertors
 289          on National Semiconductors LP3972 PMIC
 290
 291 config REGULATOR_LP872X
 292         tristate "TI/National Semiconductor LP8720/LP8725 voltage regulators"
 293         depends on I2C
 294         select REGMAP_I2C
 295         help
 296           This driver supports LP8720/LP8725 PMIC
 297
 298 config REGULATOR_LP8755
 299         tristate "TI LP8755 High Performance PMU driver"
 300         depends on I2C
 301         select REGMAP_I2C
 302         help
 303           This driver supports LP8755 High Performance PMU driver. This
 304           chip contains six step-down DC/DC converters which can support
 305           9 mode multiphase configuration.
 306
 307 config REGULATOR_LP8788
 308         tristate "TI LP8788 Power Regulators"
 309         depends on MFD_LP8788
 310         help
 311           This driver supports LP8788 voltage regulator chip.
 312
 313 config REGULATOR_LTC3589
 314         tristate "LTC3589 8-output voltage regulator"
 315         depends on I2C
 316         select REGMAP_I2C
 317         help
 318           This enables support for the LTC3589, LTC3589-1, and LTC3589-2
 319           8-output regulators controlled via I2C.
 320
 321 config REGULATOR_MAX14577
 322         tristate "Maxim 14577/77836 regulator"
 323         depends on MFD_MAX14577
 324         help
 325           This driver controls a Maxim MAX14577/77836 regulator via I2C bus.
 326           The MAX14577 regulators include safeout LDO and charger current
 327           regulator. The MAX77836 has two additional LDOs.
 328
 329 config REGULATOR_MAX1586
 330         tristate "Maxim 1586/1587 voltage regulator"
 331         depends on I2C
 332         help
 333           This driver controls a Maxim 1586 or 1587 voltage output
 334           regulator via I2C bus. The provided regulator is suitable
 335           for PXA27x chips to control VCC_CORE and VCC_USIM voltages.
 336
 337 config REGULATOR_MAX8649
 338         tristate "Maxim 8649 voltage regulator"
 339         depends on I2C
 340         select REGMAP_I2C
 341         help
 342           This driver controls a Maxim 8649 voltage output regulator via
 343           I2C bus.
 344
 345 config REGULATOR_MAX8660
 346         tristate "Maxim 8660/8661 voltage regulator"
 347         depends on I2C
 348         help
 349           This driver controls a Maxim 8660/8661 voltage output
 350           regulator via I2C bus.
 351
 352 config REGULATOR_MAX8907
 353         tristate "Maxim 8907 voltage regulator"
 354         depends on MFD_MAX8907
 355         help
 356           This driver controls a Maxim 8907 voltage output regulator
 357           via I2C bus. The provided regulator is suitable for Tegra
 358           chip to control Step-Down DC-DC and LDOs.
 359
 360 config REGULATOR_MAX8925
 361         tristate "Maxim MAX8925 Power Management IC"
 362         depends on MFD_MAX8925
 363         help
 364           Say y here to support the voltage regulaltor of Maxim MAX8925 PMIC.
 365
 366 config REGULATOR_MAX8952
 367         tristate "Maxim MAX8952 Power Management IC"
 368         depends on I2C
 369         help
 370           This driver controls a Maxim 8952 voltage output regulator
 371           via I2C bus. Maxim 8952 has one voltage output and supports 4 DVS
 372           modes ranging from 0.77V to 1.40V by 0.01V steps.
 373
 374 config REGULATOR_MAX8973
 375         tristate "Maxim MAX8973 voltage regulator "
 376         depends on I2C
 377         select REGMAP_I2C
 378         help
 379           The MAXIM MAX8973 high-efficiency. three phase, DC-DC step-down
 380           switching regulator delievers up to 9A of output current. Each
 381           phase operates at a 2MHz fixed frequency with a 120 deg shift
 382           from the adjacent phase, allowing the use of small magnetic component.
 383
 384 config REGULATOR_MAX8997
 385         tristate "Maxim 8997/8966 regulator"
 386         depends on MFD_MAX8997
 387         help
 388           This driver controls a Maxim 8997/8966 regulator
 389           via I2C bus. The provided regulator is suitable for S5PC110,
 390           S5PV210, and Exynos-4 chips to control VCC_CORE and
 391           VCC_USIM voltages.
 392
 393 config REGULATOR_MAX8998
 394         tristate "Maxim 8998 voltage regulator"
 395         depends on MFD_MAX8998
 396         help
 397           This driver controls a Maxim 8998 voltage output regulator
 398           via I2C bus. The provided regulator is suitable for S3C6410
 399           and S5PC1XX chips to control VCC_CORE and VCC_USIM voltages.
 400
 401 config REGULATOR_MAX77686
 402         tristate "Maxim 77686 regulator"
 403         depends on MFD_MAX77686
 404         help
 405           This driver controls a Maxim 77686 regulator
 406           via I2C bus. The provided regulator is suitable for
 407           Exynos-4 chips to control VARM and VINT voltages.
 408
 409 config REGULATOR_MAX77693
 410         tristate "Maxim MAX77693 regulator"
 411         depends on MFD_MAX77693
 412         help
 413           This driver controls a Maxim 77693 regulator via I2C bus.
 414           The regulators include two LDOs, 'SAFEOUT1', 'SAFEOUT2'
 415           and one current regulator 'CHARGER'. This is suitable for
 416           Exynos-4x12 chips.
 417
 418 config REGULATOR_MAX77802
 419         tristate "Maxim 77802 regulator"
 420         depends on MFD_MAX77686
 421         help
 422           This driver controls a Maxim 77802 regulator
 423           via I2C bus. The provided regulator is suitable for
 424           Exynos5420/Exynos5800 SoCs to control various voltages.
 425           It includes support for control of voltage and ramp speed.
 426
 427 config REGULATOR_MAX77843
 428         tristate "Maxim 77843 regulator"
 429         depends on MFD_MAX77843
 430         help
 431           This driver controls a Maxim 77843 regulator.
 432           The regulator include two 'SAFEOUT' for USB(Universal Serial Bus)
 433           This is suitable for Exynos5433 SoC chips.
 434
 435 config REGULATOR_MC13XXX_CORE
 436         tristate
 437
 438 config REGULATOR_MC13783
 439         tristate "Freescale MC13783 regulator driver"
 440         depends on MFD_MC13XXX
 441         select REGULATOR_MC13XXX_CORE
 442         help
 443           Say y here to support the regulators found on the Freescale MC13783
 444           PMIC.
 445
 446 config REGULATOR_MC13892
 447         tristate "Freescale MC13892 regulator driver"
 448         depends on MFD_MC13XXX
 449         select REGULATOR_MC13XXX_CORE
 450         help
 451           Say y here to support the regulators found on the Freescale MC13892
 452           PMIC.
 453
 454 config REGULATOR_MT6397
 455         tristate "MediaTek MT6397 PMIC"
 456         depends on MFD_MT6397
 457         help
 458           Say y here to select this option to enable the power regulator of
 459           MediaTek MT6397 PMIC.
 460           This driver supports the control of different power rails of device
 461           through regulator interface.
 462
 463 config REGULATOR_PALMAS
 464         tristate "TI Palmas PMIC Regulators"
 465         depends on MFD_PALMAS
 466         help
 467           If you wish to control the regulators on the Palmas series of
 468           chips say Y here. This will enable support for all the software
 469           controllable SMPS/LDO regulators.
 470
 471           The regulators available on Palmas series chips vary depending
 472           on the muxing. This is handled automatically in the driver by
 473           reading the mux info from OTP.
 474
 475 config REGULATOR_PBIAS
 476         tristate "PBIAS OMAP regulator driver"
 477         depends on (ARCH_OMAP || COMPILE_TEST) && MFD_SYSCON
 478         help
 479          Say y here to support pbias regulator for mmc1:SD card i/o
 480          on OMAP SoCs.
 481          This driver provides support for OMAP pbias modelled
 482          regulators.
 483
 484 config REGULATOR_PCAP
 485         tristate "Motorola PCAP2 regulator driver"
 486         depends on EZX_PCAP
 487         help
 488          This driver provides support for the voltage regulators of the
 489          PCAP2 PMIC.
 490
 491 config REGULATOR_PCF50633
 492         tristate "NXP PCF50633 regulator driver"
 493         depends on MFD_PCF50633
 494         help
 495          Say Y here to support the voltage regulators and convertors
 496          on PCF50633
 497
 498 config REGULATOR_PFUZE100
 499         tristate "Freescale PFUZE100/PFUZE200 regulator driver"
 500         depends on I2C
 501         select REGMAP_I2C
 502         help
 503           Say y here to support the regulators found on the Freescale
 504           PFUZE100/PFUZE200 PMIC.
 505
 506 config REGULATOR_PWM
 507         tristate "PWM voltage regulator"
 508         depends on PWM
 509         help
 510           This driver supports PWM controlled voltage regulators. PWM
 511           duty cycle can increase or decrease the voltage.
 512
 513 config REGULATOR_QCOM_RPM
 514         tristate "Qualcomm RPM regulator driver"
 515         depends on MFD_QCOM_RPM
 516         help
 517           If you say yes to this option, support will be included for the
 518           regulators exposed by the Resource Power Manager found in Qualcomm
 519           8660, 8960 and 8064 based devices.
 520
 521           Say M here if you want to include support for the regulators on the
 522           Qualcomm RPM as a module. The module will be named
 523           "qcom_rpm-regulator".
 524
 525 config REGULATOR_QCOM_SPMI
 526         tristate "Qualcomm SPMI regulator driver"
 527         depends on SPMI || COMPILE_TEST
 528         help
 529           If you say yes to this option, support will be included for the
 530           regulators found in Qualcomm SPMI PMICs.
 531
 532           Say M here if you want to include support for the regulators on the
 533           Qualcomm SPMI PMICs as a module. The module will be named
 534           "qcom_spmi-regulator".
 535
 536 config REGULATOR_RC5T583
 537         tristate "RICOH RC5T583 Power regulators"
 538         depends on MFD_RC5T583
 539         help
 540           Select this option to enable the power regulator of RICOH
 541           PMIC RC5T583.
 542           This driver supports the control of different power rails of device
 543           through regulator interface. The device supports multiple DCDC/LDO
 544           outputs which can be controlled by i2c communication.
 545
 546 config REGULATOR_RK808
 547         tristate "Rockchip RK808 Power regulators"
 548         depends on MFD_RK808
 549         help
 550           Select this option to enable the power regulator of ROCKCHIP
 551           PMIC RK808.
 552           This driver supports the control of different power rails of device
 553           through regulator interface. The device supports multiple DCDC/LDO
 554           outputs which can be controlled by i2c communication.
 555
 556 config REGULATOR_RN5T618
 557         tristate "Ricoh RN5T618 voltage regulators"
 558         depends on MFD_RN5T618
 559         help
 560           Say y here to support the regulators found on Ricoh RN5T618 PMIC.
 561
 562 config REGULATOR_RT5033
 563         tristate "Richtek RT5033 Regulators"
 564         depends on MFD_RT5033
 565         help
 566           This adds support for voltage and current regulators in Richtek
 567           RT5033 PMIC. The device supports multiple regulators like
 568           current source, LDO and Buck.
 569
 570 config REGULATOR_S2MPA01
 571         tristate "Samsung S2MPA01 voltage regulator"
 572         depends on MFD_SEC_CORE
 573         help
 574          This driver controls Samsung S2MPA01 voltage output regulator
 575          via I2C bus. S2MPA01 has 10 Bucks and 26 LDO outputs.
 576
 577 config REGULATOR_S2MPS11
 578         tristate "Samsung S2MPS11/S2MPS13/S2MPS14/S2MPU02 voltage regulator"
 579         depends on MFD_SEC_CORE
 580         help
 581          This driver supports a Samsung S2MPS11/S2MPS13/S2MPS14/S2MPU02 voltage
 582          output regulator via I2C bus. The chip is comprised of high efficient
 583          Buck converters including Dual-Phase Buck converter, Buck-Boost
 584          converter, various LDOs.
 585
 586 config REGULATOR_S5M8767
 587         tristate "Samsung S5M8767A voltage regulator"
 588         depends on MFD_SEC_CORE
 589         help
 590          This driver supports a Samsung S5M8767A voltage output regulator
 591          via I2C bus. S5M8767A have 9 Bucks and 28 LDOs output and
 592          supports DVS mode with 8bits of output voltage control.
 593
 594 config REGULATOR_SKY81452
 595         tristate "Skyworks Solutions SKY81452 voltage regulator"
 596         depends on MFD_SKY81452
 597         help
 598           This driver supports Skyworks SKY81452 voltage output regulator
 599           via I2C bus. SKY81452 has one voltage linear regulator can be
 600           programmed from 4.5V to 20V.
 601
 602           This driver can also be built as a module. If so, the module
 603           will be called sky81452-regulator.
 604
 605 config REGULATOR_TI_ABB
 606         tristate "TI Adaptive Body Bias on-chip LDO"
 607         depends on ARCH_OMAP
 608         help
 609           Select this option to support Texas Instruments' on-chip Adaptive Body
 610           Bias (ABB) LDO regulators. It is recommended that this option be
 611           enabled on required TI SoC. Certain Operating Performance Points
 612           on TI SoCs may be unstable without enabling this as it provides
 613           device specific optimized bias to allow/optimize functionality.
 614
 615 config REGULATOR_STW481X_VMMC
 616         bool "ST Microelectronics STW481X VMMC regulator"
 617         depends on MFD_STW481X
 618         default y if MFD_STW481X
 619         help
 620           This driver supports the internal VMMC regulator in the STw481x
 621           PMIC chips.
 622
 623 config REGULATOR_TPS51632
 624         tristate "TI TPS51632 Power Regulator"
 625         depends on I2C
 626         select REGMAP_I2C
 627         help
 628           This driver supports TPS51632 voltage regulator chip.
 629           The TPS51632 is 3-2-1 Phase D-Cap+ Step Down Driverless Controller
 630           with Serial VID control and DVFS.
 631           The voltage output can be configure through I2C interface or PWM
 632           interface.
 633
 634 config REGULATOR_TPS6105X
 635         tristate "TI TPS6105X Power regulators"
 636         depends on TPS6105X
 637         default y if TPS6105X
 638         help
 639           This driver supports TPS61050/TPS61052 voltage regulator chips.
 640           It is a single boost converter primarily for white LEDs and
 641           audio amplifiers.
 642
 643 config REGULATOR_TPS62360
 644         tristate "TI TPS6236x Power Regulator"
 645         depends on I2C
 646         select REGMAP_I2C
 647         help
 648           This driver supports TPS6236x voltage regulator chip. This
 649           regulator is meant for processor core supply. This chip is
 650           high-frequency synchronous step down dc-dc converter optimized
 651           for battery-powered portable applications.
 652
 653 config REGULATOR_TPS65023
 654         tristate "TI TPS65023 Power regulators"
 655         depends on I2C
 656         select REGMAP_I2C
 657         help
 658           This driver supports TPS65023 voltage regulator chips. TPS65023 provides
 659           three step-down converters and two general-purpose LDO voltage regulators.
 660           It supports TI's software based Class-2 SmartReflex implementation.
 661
 662 config REGULATOR_TPS6507X
 663         tristate "TI TPS6507X Power regulators"
 664         depends on I2C
 665         help
 666           This driver supports TPS6507X voltage regulator chips. TPS6507X provides
 667           three step-down converters and two general-purpose LDO voltage regulators.
 668           It supports TI's software based Class-2 SmartReflex implementation.
 669
 670 config REGULATOR_TPS65090
 671         tristate "TI TPS65090 Power regulator"
 672         depends on MFD_TPS65090
 673         help
 674           This driver provides support for the voltage regulators on the
 675           TI TPS65090 PMIC.
 676
 677 config REGULATOR_TPS65217
 678         tristate "TI TPS65217 Power regulators"
 679         depends on MFD_TPS65217
 680         help
 681           This driver supports TPS65217 voltage regulator chips. TPS65217
 682           provides three step-down converters and four general-purpose LDO
 683           voltage regulators. It supports software based voltage control
 684           for different voltage domains
 685
 686 config REGULATOR_TPS65218
 687         tristate "TI TPS65218 Power regulators"
 688         depends on MFD_TPS65218 && OF
 689         help
 690           This driver supports TPS65218 voltage regulator chips. TPS65218
 691           provides six step-down converters and one general-purpose LDO
 692           voltage regulators. It supports software based voltage control
 693           for different voltage domains
 694
 695 config REGULATOR_TPS6524X
 696         tristate "TI TPS6524X Power regulators"
 697         depends on SPI
 698         help
 699           This driver supports TPS6524X voltage regulator chips. TPS6524X
 700           provides three step-down converters and two general-purpose LDO
 701           voltage regulators.  This device is interfaced using a customized
 702           serial interface currently supported on the sequencer serial
 703           port controller.
 704
 705 config REGULATOR_TPS6586X
 706         tristate "TI TPS6586X Power regulators"
 707         depends on MFD_TPS6586X
 708         help
 709           This driver supports TPS6586X voltage regulator chips.
 710
 711 config REGULATOR_TPS65910
 712         tristate "TI TPS65910/TPS65911 Power Regulators"
 713         depends on MFD_TPS65910
 714         help
 715           This driver supports TPS65910/TPS65911 voltage regulator chips.
 716
 717 config REGULATOR_TPS65912
 718         tristate "TI TPS65912 Power regulator"
 719         depends on (MFD_TPS65912_I2C || MFD_TPS65912_SPI)
 720         help
 721             This driver supports TPS65912 voltage regulator chip.
 722
 723 config REGULATOR_TPS80031
 724         tristate "TI TPS80031/TPS80032 power regualtor driver"
 725         depends on MFD_TPS80031
 726         help
 727           TPS80031/ TPS80032 Fully Integrated Power Management with Power
 728           Path and Battery Charger. It has 5 configurable step-down
 729           converters, 11 general purpose LDOs, VBUS generator and digital
 730           output to control regulators.
 731
 732 config REGULATOR_TWL4030
 733         tristate "TI TWL4030/TWL5030/TWL6030/TPS659x0 PMIC"
 734         depends on TWL4030_CORE
 735         help
 736           This driver supports the voltage regulators provided by
 737           this family of companion chips.
 738
 739 config REGULATOR_VEXPRESS
 740         tristate "Versatile Express regulators"
 741         depends on VEXPRESS_CONFIG
 742         help
 743           This driver provides support for voltage regulators available
 744           on the ARM Ltd's Versatile Express platform.
 745
 746 config REGULATOR_WM831X
 747         tristate "Wolfson Microelectronics WM831x PMIC regulators"
 748         depends on MFD_WM831X
 749         help
 750           Support the voltage and current regulators of the WM831x series
 751           of PMIC devices.
 752
 753 config REGULATOR_WM8350
 754         tristate "Wolfson Microelectronics WM8350 AudioPlus PMIC"
 755         depends on MFD_WM8350
 756         help
 757           This driver provides support for the voltage and current regulators
 758           of the WM8350 AudioPlus PMIC.
 759
 760 config REGULATOR_WM8400
 761         tristate "Wolfson Microelectronics WM8400 AudioPlus PMIC"
 762         depends on MFD_WM8400
 763         help
 764           This driver provides support for the voltage regulators of the
 765           WM8400 AudioPlus PMIC.
 766
 767 config REGULATOR_WM8994
 768         tristate "Wolfson Microelectronics WM8994 CODEC"
 769         depends on MFD_WM8994
 770         help
 771           This driver provides support for the voltage regulators on the
 772           WM8994 CODEC.
 773
 774 endif
 775