drivers/regulator/Kconfig

   1 menuconfig REGULATOR
   2         bool "Voltage and Current Regulator Support"
   3         help
   4           Generic Voltage and Current Regulator support.
   5
   6           This framework is designed to provide a generic interface to voltage
   7           and current regulators within the Linux kernel. It's intended to
   8           provide voltage and current control to client or consumer drivers and
   9           also provide status information to user space applications through a
  10           sysfs interface.
  11
  12           The intention is to allow systems to dynamically control regulator
  13           output in order to save power and prolong battery life. This applies
  14           to both voltage regulators (where voltage output is controllable) and
  15           current sinks (where current output is controllable).
  16
  17           This framework safely compiles out if not selected so that client
  18           drivers can still be used in systems with no software controllable
  19           regulators.
  20
  21           If unsure, say no.
  22
  23
  24 if REGULATOR
  25
  26 config REGULATOR_DEBUG
  27         bool "Regulator debug support"
  28         help
  29           Say yes here to enable debugging support.
  30
  31 config REGULATOR_DUMMY
  32         bool "Provide a dummy regulator if regulator lookups fail"
  33         help
  34           If this option is enabled then when a regulator lookup fails
  35           and the board has not specified that it has provided full
  36           constraints the regulator core will provide an always
  37           enabled dummy regulator, allowing consumer drivers to continue.
  38
  39           A warning will be generated when this substitution is done.
  40
  41 config REGULATOR_FIXED_VOLTAGE
  42         tristate "Fixed voltage regulator support"
  43         help
  44           This driver provides support for fixed voltage regulators,
  45           useful for systems which use a combination of software
  46           managed regulators and simple non-configurable regulators.
  47
  48 config REGULATOR_VIRTUAL_CONSUMER
  49         tristate "Virtual regulator consumer support"
  50         help
  51           This driver provides a virtual consumer for the voltage and
  52           current regulator API which provides sysfs controls for
  53           configuring the supplies requested.  This is mainly useful
  54           for test purposes.
  55
  56           If unsure, say no.
  57
  58 config REGULATOR_USERSPACE_CONSUMER
  59         tristate "Userspace regulator consumer support"
  60         help
  61           There are some classes of devices that are controlled entirely
  62           from user space. Userspace consumer driver provides ability to
  63           control power supplies for such devices.
  64
  65           If unsure, say no.
  66
  67 config REGULATOR_GPIO
  68         tristate "GPIO regulator support"
  69         depends on GPIOLIB
  70         help
  71           This driver provides support for regulators that can be
  72           controlled via gpios.
  73           It is capable of supporting current and voltage regulators
  74           and the platform has to provide a mapping of GPIO-states
  75           to target volts/amps.
  76
  77 config REGULATOR_AD5398
  78         tristate "Analog Devices AD5398/AD5821 regulators"
  79         depends on I2C
  80         help
  81           This driver supports AD5398 and AD5821 current regulator chips.
  82           If building into module, its name is ad5398.ko.
  83
  84 config REGULATOR_AAT2870
  85         tristate "AnalogicTech AAT2870 Regulators"
  86         depends on MFD_AAT2870_CORE
  87         help
  88           If you have a AnalogicTech AAT2870 say Y to enable the
  89           regulator driver.
  90
  91 config REGULATOR_ARIZONA
  92         tristate "Wolfson Arizona class devices"
  93         depends on MFD_ARIZONA
  94         depends on SND_SOC
  95         help
  96           Support for the regulators found on Wolfson Arizona class
  97           devices.
  98
  99 config REGULATOR_DA903X
 100         tristate "Dialog Semiconductor DA9030/DA9034 regulators"
 101         depends on PMIC_DA903X
 102         help
 103           Say y here to support the BUCKs and LDOs regulators found on
 104           Dialog Semiconductor DA9030/DA9034 PMIC.
 105
 106 config REGULATOR_DA9052
 107         tristate "Dialog Semiconductor DA9052/DA9053 regulators"
 108         depends on PMIC_DA9052
 109         help
 110           This driver supports the voltage regulators of DA9052-BC and
 111           DA9053-AA/Bx PMIC.
 112
 113 config REGULATOR_DA9055
 114         tristate "Dialog Semiconductor DA9055 regulators"
 115         depends on MFD_DA9055
 116         help
 117           Say y here to support the BUCKs and LDOs regulators found on
 118           Dialog Semiconductor DA9055 PMIC.
 119
 120           This driver can also be built as a module. If so, the module
 121           will be called da9055-regulator.
 122
 123 config REGULATOR_FAN53555
 124         tristate "Fairchild FAN53555 Regulator"
 125         depends on I2C
 126         select REGMAP_I2C
 127         help
 128           This driver supports Fairchild FAN53555 Digitally Programmable
 129           TinyBuck Regulator. The FAN53555 is a step-down switching voltage
 130           regulator that delivers a digitally programmable output from an
 131           input voltage supply of 2.5V to 5.5V. The output voltage is
 132           programmed through an I2C interface.
 133
 134 config REGULATOR_ANATOP
 135         tristate "Freescale i.MX on-chip ANATOP LDO regulators"
 136         depends on MFD_SYSCON
 137         help
 138           Say y here to support Freescale i.MX on-chip ANATOP LDOs
 139           regulators. It is recommended that this option be
 140           enabled on i.MX6 platform.
 141
 142 config REGULATOR_MC13XXX_CORE
 143         tristate
 144
 145 config REGULATOR_MC13783
 146         tristate "Freescale MC13783 regulator driver"
 147         depends on MFD_MC13783
 148         select REGULATOR_MC13XXX_CORE
 149         help
 150           Say y here to support the regulators found on the Freescale MC13783
 151           PMIC.
 152
 153 config REGULATOR_MC13892
 154         tristate "Freescale MC13892 regulator driver"
 155         depends on MFD_MC13XXX
 156         select REGULATOR_MC13XXX_CORE
 157         help
 158           Say y here to support the regulators found on the Freescale MC13892
 159           PMIC.
 160
 161 config REGULATOR_ISL6271A
 162         tristate "Intersil ISL6271A Power regulator"
 163         depends on I2C
 164         help
 165           This driver supports ISL6271A voltage regulator chip.
 166
 167 config REGULATOR_88PM8607
 168         bool "Marvell 88PM8607 Power regulators"
 169         depends on MFD_88PM860X=y
 170         help
 171           This driver supports 88PM8607 voltage regulator chips.
 172
 173 config REGULATOR_MAX1586
 174         tristate "Maxim 1586/1587 voltage regulator"
 175         depends on I2C
 176         help
 177           This driver controls a Maxim 1586 or 1587 voltage output
 178           regulator via I2C bus. The provided regulator is suitable
 179           for PXA27x chips to control VCC_CORE and VCC_USIM voltages.
 180
 181 config REGULATOR_MAX8649
 182         tristate "Maxim 8649 voltage regulator"
 183         depends on I2C
 184         select REGMAP_I2C
 185         help
 186           This driver controls a Maxim 8649 voltage output regulator via
 187           I2C bus.
 188
 189 config REGULATOR_MAX8660
 190         tristate "Maxim 8660/8661 voltage regulator"
 191         depends on I2C
 192         help
 193           This driver controls a Maxim 8660/8661 voltage output
 194           regulator via I2C bus.
 195
 196 config REGULATOR_MAX8907
 197         tristate "Maxim 8907 voltage regulator"
 198         depends on MFD_MAX8907
 199         help
 200           This driver controls a Maxim 8907 voltage output regulator
 201           via I2C bus. The provided regulator is suitable for Tegra
 202           chip to control Step-Down DC-DC and LDOs.
 203
 204 config REGULATOR_MAX8925
 205         tristate "Maxim MAX8925 Power Management IC"
 206         depends on MFD_MAX8925
 207         help
 208           Say y here to support the voltage regulaltor of Maxim MAX8925 PMIC.
 209
 210 config REGULATOR_MAX8952
 211         tristate "Maxim MAX8952 Power Management IC"
 212         depends on I2C
 213         help
 214           This driver controls a Maxim 8952 voltage output regulator
 215           via I2C bus. Maxim 8952 has one voltage output and supports 4 DVS
 216           modes ranging from 0.77V to 1.40V by 0.01V steps.
 217
 218 config REGULATOR_MAX8973
 219         tristate "Maxim MAX8973 voltage regulator "
 220         depends on I2C
 221         select REGMAP_I2C
 222         help
 223           The MAXIM MAX8973 high-efficiency. three phase, DC-DC step-down
 224           switching regulator delievers up to 9A of output current. Each
 225           phase operates at a 2MHz fixed frequency with a 120 deg shift
 226           from the adjacent phase, allowing the use of small magnetic component.
 227
 228 config REGULATOR_MAX8997
 229         tristate "Maxim 8997/8966 regulator"
 230         depends on MFD_MAX8997
 231         help
 232           This driver controls a Maxim 8997/8966 regulator
 233           via I2C bus. The provided regulator is suitable for S5PC110,
 234           S5PV210, and Exynos-4 chips to control VCC_CORE and
 235           VCC_USIM voltages.
 236
 237 config REGULATOR_MAX8998
 238         tristate "Maxim 8998 voltage regulator"
 239         depends on MFD_MAX8998
 240         help
 241           This driver controls a Maxim 8998 voltage output regulator
 242           via I2C bus. The provided regulator is suitable for S3C6410
 243           and S5PC1XX chips to control VCC_CORE and VCC_USIM voltages.
 244
 245 config REGULATOR_MAX77686
 246         tristate "Maxim 77686 regulator"
 247         depends on MFD_MAX77686
 248         help
 249           This driver controls a Maxim 77686 regulator
 250           via I2C bus. The provided regulator is suitable for
 251           Exynos-4 chips to control VARM and VINT voltages.
 252
 253 config REGULATOR_MAX77693
 254         tristate "Maxim MAX77693 regulator"
 255         depends on MFD_MAX77693
 256         help
 257           This driver controls a Maxim 77693 regulator via I2C bus.
 258           The regulators include two LDOs, 'SAFEOUT1', 'SAFEOUT2'
 259           and one current regulator 'CHARGER'. This is suitable for
 260           Exynos-4x12 chips.
 261
 262 config REGULATOR_PCAP
 263         tristate "Motorola PCAP2 regulator driver"
 264         depends on EZX_PCAP
 265         help
 266          This driver provides support for the voltage regulators of the
 267          PCAP2 PMIC.
 268
 269 config REGULATOR_LP3971
 270         tristate "National Semiconductors LP3971 PMIC regulator driver"
 271         depends on I2C
 272         help
 273          Say Y here to support the voltage regulators and convertors
 274          on National Semiconductors LP3971 PMIC
 275
 276 config REGULATOR_LP3972
 277         tristate "National Semiconductors LP3972 PMIC regulator driver"
 278         depends on I2C
 279         help
 280          Say Y here to support the voltage regulators and convertors
 281          on National Semiconductors LP3972 PMIC
 282
 283 config REGULATOR_LP872X
 284         bool "TI/National Semiconductor LP8720/LP8725 voltage regulators"
 285         depends on I2C=y
 286         select REGMAP_I2C
 287         help
 288           This driver supports LP8720/LP8725 PMIC
 289
 290 config REGULATOR_LP8755
 291         tristate "TI LP8755 High Performance PMU driver"
 292         depends on I2C
 293         select REGMAP_I2C
 294         help
 295           This driver supports LP8755 High Performance PMU driver. This
 296           chip contains six step-down DC/DC converters which can support
 297           9 mode multiphase configuration.
 298
 299 config REGULATOR_LP8788
 300         bool "TI LP8788 Power Regulators"
 301         depends on MFD_LP8788
 302         help
 303           This driver supports LP8788 voltage regulator chip.
 304
 305 config REGULATOR_PCF50633
 306         tristate "NXP PCF50633 regulator driver"
 307         depends on MFD_PCF50633
 308         help
 309          Say Y here to support the voltage regulators and convertors
 310          on PCF50633
 311
 312 config REGULATOR_RC5T583
 313         tristate "RICOH RC5T583 Power regulators"
 314         depends on MFD_RC5T583
 315         help
 316           Select this option to enable the power regulator of RICOH
 317           PMIC RC5T583.
 318           This driver supports the control of different power rails of device
 319           through regulator interface. The device supports multiple DCDC/LDO
 320           outputs which can be controlled by i2c communication.
 321
 322 config REGULATOR_S2MPS11
 323         tristate "Samsung S2MPS11 voltage regulator"
 324         depends on MFD_SEC_CORE
 325         help
 326          This driver supports a Samsung S2MPS11 voltage output regulator
 327          via I2C bus. S2MPS11 is comprised of high efficient Buck converters
 328          including Dual-Phase Buck converter, Buck-Boost converter, various LDOs.
 329
 330 config REGULATOR_S5M8767
 331         tristate "Samsung S5M8767A voltage regulator"
 332         depends on MFD_SEC_CORE
 333         help
 334          This driver supports a Samsung S5M8767A voltage output regulator
 335          via I2C bus. S5M8767A have 9 Bucks and 28 LDOs output and
 336          supports DVS mode with 8bits of output voltage control.
 337
 338 config REGULATOR_AB3100
 339         tristate "ST-Ericsson AB3100 Regulator functions"
 340         depends on AB3100_CORE
 341         default y if AB3100_CORE
 342         help
 343          These regulators correspond to functionality in the
 344          AB3100 analog baseband dealing with power regulators
 345          for the system.
 346
 347 config REGULATOR_AB8500
 348         bool "ST-Ericsson AB8500 Power Regulators"
 349         depends on AB8500_CORE
 350         help
 351           This driver supports the regulators found on the ST-Ericsson mixed
 352           signal AB8500 PMIC
 353
 354 config REGULATOR_DBX500_PRCMU
 355         bool
 356
 357 config REGULATOR_DB8500_PRCMU
 358         bool "ST-Ericsson DB8500 Voltage Domain Regulators"
 359         depends on MFD_DB8500_PRCMU
 360         select REGULATOR_DBX500_PRCMU
 361         help
 362           This driver supports the voltage domain regulators controlled by the
 363           DB8500 PRCMU
 364
 365 config REGULATOR_PALMAS
 366         tristate "TI Palmas PMIC Regulators"
 367         depends on MFD_PALMAS
 368         help
 369           If you wish to control the regulators on the Palmas series of
 370           chips say Y here. This will enable support for all the software
 371           controllable SMPS/LDO regulators.
 372
 373           The regulators available on Palmas series chips vary depending
 374           on the muxing. This is handled automatically in the driver by
 375           reading the mux info from OTP.
 376
 377 config REGULATOR_TPS51632
 378         tristate "TI TPS51632 Power Regulator"
 379         depends on I2C
 380         select REGMAP_I2C
 381         help
 382           This driver supports TPS51632 voltage regulator chip.
 383           The TPS51632 is 3-2-1 Phase D-Cap+ Step Down Driverless Controller
 384           with Serial VID control and DVFS.
 385           The voltage output can be configure through I2C interface or PWM
 386           interface.
 387
 388 config REGULATOR_TPS6105X
 389         tristate "TI TPS6105X Power regulators"
 390         depends on TPS6105X
 391         default y if TPS6105X
 392         help
 393           This driver supports TPS61050/TPS61052 voltage regulator chips.
 394           It is a single boost converter primarily for white LEDs and
 395           audio amplifiers.
 396
 397 config REGULATOR_TPS62360
 398         tristate "TI TPS6236x Power Regulator"
 399         depends on I2C
 400         select REGMAP_I2C
 401         help
 402           This driver supports TPS6236x voltage regulator chip. This
 403           regulator is meant for processor core supply. This chip is
 404           high-frequency synchronous step down dc-dc converter optimized
 405           for battery-powered portable applications.
 406
 407 config REGULATOR_TPS65023
 408         tristate "TI TPS65023 Power regulators"
 409         depends on I2C
 410         select REGMAP_I2C
 411         help
 412           This driver supports TPS65023 voltage regulator chips. TPS65023 provides
 413           three step-down converters and two general-purpose LDO voltage regulators.
 414           It supports TI's software based Class-2 SmartReflex implementation.
 415
 416 config REGULATOR_TPS6507X
 417         tristate "TI TPS6507X Power regulators"
 418         depends on I2C
 419         help
 420           This driver supports TPS6507X voltage regulator chips. TPS6507X provides
 421           three step-down converters and two general-purpose LDO voltage regulators.
 422           It supports TI's software based Class-2 SmartReflex implementation.
 423
 424 config REGULATOR_TPS65090
 425         tristate "TI TPS65090 Power regulator"
 426         depends on MFD_TPS65090
 427         help
 428           This driver provides support for the voltage regulators on the
 429           TI TPS65090 PMIC.
 430
 431 config REGULATOR_TPS65217
 432         tristate "TI TPS65217 Power regulators"
 433         depends on MFD_TPS65217
 434         help
 435           This driver supports TPS65217 voltage regulator chips. TPS65217
 436           provides three step-down converters and four general-purpose LDO
 437           voltage regulators. It supports software based voltage control
 438           for different voltage domains
 439
 440 config REGULATOR_TPS6524X
 441         tristate "TI TPS6524X Power regulators"
 442         depends on SPI
 443         help
 444           This driver supports TPS6524X voltage regulator chips. TPS6524X
 445           provides three step-down converters and two general-purpose LDO
 446           voltage regulators.  This device is interfaced using a customized
 447           serial interface currently supported on the sequencer serial
 448           port controller.
 449
 450 config REGULATOR_TPS6586X
 451         tristate "TI TPS6586X Power regulators"
 452         depends on MFD_TPS6586X
 453         help
 454           This driver supports TPS6586X voltage regulator chips.
 455
 456 config REGULATOR_TPS65910
 457         tristate "TI TPS65910/TPS65911 Power Regulators"
 458         depends on MFD_TPS65910
 459         help
 460           This driver supports TPS65910/TPS65911 voltage regulator chips.
 461
 462 config REGULATOR_TPS65912
 463         tristate "TI TPS65912 Power regulator"
 464         depends on (MFD_TPS65912_I2C || MFD_TPS65912_SPI)
 465         help
 466             This driver supports TPS65912 voltage regulator chip.
 467
 468 config REGULATOR_TPS80031
 469         tristate "TI TPS80031/TPS80032 power regualtor driver"
 470         depends on MFD_TPS80031
 471         help
 472           TPS80031/ TPS80032 Fully Integrated Power Management with Power
 473           Path and Battery Charger. It has 5 configurable step-down
 474           converters, 11 general purpose LDOs, VBUS generator and digital
 475           output to control regulators.
 476
 477 config REGULATOR_TWL4030
 478         bool "TI TWL4030/TWL5030/TWL6030/TPS659x0 PMIC"
 479         depends on TWL4030_CORE
 480         help
 481           This driver supports the voltage regulators provided by
 482           this family of companion chips.
 483
 484 config REGULATOR_TI_ABB
 485         bool "TI Adaptive Body Bias on-chip LDO"
 486         depends on ARCH_OMAP
 487         help
 488           Select this option to support Texas Instruments' on-chip Adaptive Body
 489           Bias (ABB) LDO regulators. It is recommended that this option be
 490           enabled on required TI SoC. Certain Operating Performance Points
 491           on TI SoCs may be unstable without enabling this as it provides
 492           device specific optimized bias to allow/optimize functionality.
 493
 494 config REGULATOR_VEXPRESS
 495         tristate "Versatile Express regulators"
 496         depends on VEXPRESS_CONFIG
 497         help
 498           This driver provides support for voltage regulators available
 499           on the ARM Ltd's Versatile Express platform.
 500
 501 config REGULATOR_WM831X
 502         tristate "Wolfson Microelectronics WM831x PMIC regulators"
 503         depends on MFD_WM831X
 504         help
 505           Support the voltage and current regulators of the WM831x series
 506           of PMIC devices.
 507
 508 config REGULATOR_WM8350
 509         tristate "Wolfson Microelectronics WM8350 AudioPlus PMIC"
 510         depends on MFD_WM8350
 511         help
 512           This driver provides support for the voltage and current regulators
 513           of the WM8350 AudioPlus PMIC.
 514
 515 config REGULATOR_WM8400
 516         tristate "Wolfson Microelectronics WM8400 AudioPlus PMIC"
 517         depends on MFD_WM8400
 518         help
 519           This driver provides support for the voltage regulators of the
 520           WM8400 AudioPlus PMIC.
 521
 522 config REGULATOR_WM8994
 523         tristate "Wolfson Microelectronics WM8994 CODEC"
 524         depends on MFD_WM8994
 525         help
 526           This driver provides support for the voltage regulators on the
 527           WM8994 CODEC.
 528
 529 config REGULATOR_AS3711
 530         tristate "AS3711 PMIC"
 531         depends on MFD_AS3711
 532         help
 533           This driver provides support for the voltage regulators on the
 534           AS3711 PMIC
 535
 536 endif
 537