drivers/regulator/Kconfig

   1 menuconfig REGULATOR
   2         bool "Voltage and Current Regulator Support"
   3         help
   4           Generic Voltage and Current Regulator support.
   5
   6           This framework is designed to provide a generic interface to voltage
   7           and current regulators within the Linux kernel. It's intended to
   8           provide voltage and current control to client or consumer drivers and
   9           also provide status information to user space applications through a
  10           sysfs interface.
  11
  12           The intention is to allow systems to dynamically control regulator
  13           output in order to save power and prolong battery life. This applies
  14           to both voltage regulators (where voltage output is controllable) and
  15           current sinks (where current output is controllable).
  16
  17           This framework safely compiles out if not selected so that client
  18           drivers can still be used in systems with no software controllable
  19           regulators.
  20
  21           If unsure, say no.
  22
  23
  24 if REGULATOR
  25
  26 config REGULATOR_DEBUG
  27         bool "Regulator debug support"
  28         help
  29           Say yes here to enable debugging support.
  30
  31 config REGULATOR_FIXED_VOLTAGE
  32         tristate "Fixed voltage regulator support"
  33         help
  34           This driver provides support for fixed voltage regulators,
  35           useful for systems which use a combination of software
  36           managed regulators and simple non-configurable regulators.
  37
  38 config REGULATOR_VIRTUAL_CONSUMER
  39         tristate "Virtual regulator consumer support"
  40         help
  41           This driver provides a virtual consumer for the voltage and
  42           current regulator API which provides sysfs controls for
  43           configuring the supplies requested.  This is mainly useful
  44           for test purposes.
  45
  46           If unsure, say no.
  47
  48 config REGULATOR_USERSPACE_CONSUMER
  49         tristate "Userspace regulator consumer support"
  50         help
  51           There are some classes of devices that are controlled entirely
  52           from user space. Userspace consumer driver provides ability to
  53           control power supplies for such devices.
  54
  55           If unsure, say no.
  56
  57 config REGULATOR_88PM800
  58         tristate "Marvell 88PM800 Power regulators"
  59         depends on MFD_88PM800
  60         help
  61           This driver supports Marvell 88PM800 voltage regulator chips.
  62           It delivers digitally programmable output,
  63           the voltage is programmed via I2C interface.
  64           It's suitable to support PXA988 chips to control VCC_MAIN and
  65           various voltages.
  66
  67 config REGULATOR_88PM8607
  68         tristate "Marvell 88PM8607 Power regulators"
  69         depends on MFD_88PM860X=y
  70         help
  71           This driver supports 88PM8607 voltage regulator chips.
  72
  73 config REGULATOR_ACT8865
  74         tristate "Active-semi act8865 voltage regulator"
  75         depends on I2C
  76         select REGMAP_I2C
  77         help
  78           This driver controls a active-semi act8865 voltage output
  79           regulator via I2C bus.
  80
  81 config REGULATOR_AD5398
  82         tristate "Analog Devices AD5398/AD5821 regulators"
  83         depends on I2C
  84         help
  85           This driver supports AD5398 and AD5821 current regulator chips.
  86           If building into module, its name is ad5398.ko.
  87
  88 config REGULATOR_ANATOP
  89         tristate "Freescale i.MX on-chip ANATOP LDO regulators"
  90         depends on MFD_SYSCON
  91         help
  92           Say y here to support Freescale i.MX on-chip ANATOP LDOs
  93           regulators. It is recommended that this option be
  94           enabled on i.MX6 platform.
  95
  96 config REGULATOR_AAT2870
  97         tristate "AnalogicTech AAT2870 Regulators"
  98         depends on MFD_AAT2870_CORE
  99         help
 100           If you have a AnalogicTech AAT2870 say Y to enable the
 101           regulator driver.
 102
 103 config REGULATOR_AB3100
 104         tristate "ST-Ericsson AB3100 Regulator functions"
 105         depends on AB3100_CORE
 106         default y if AB3100_CORE
 107         help
 108          These regulators correspond to functionality in the
 109          AB3100 analog baseband dealing with power regulators
 110          for the system.
 111
 112 config REGULATOR_AB8500
 113         bool "ST-Ericsson AB8500 Power Regulators"
 114         depends on AB8500_CORE
 115         help
 116           This driver supports the regulators found on the ST-Ericsson mixed
 117           signal AB8500 PMIC
 118
 119 config REGULATOR_ARIZONA
 120         tristate "Wolfson Arizona class devices"
 121         depends on MFD_ARIZONA
 122         depends on SND_SOC
 123         help
 124           Support for the regulators found on Wolfson Arizona class
 125           devices.
 126
 127 config REGULATOR_AS3711
 128         tristate "AS3711 PMIC"
 129         depends on MFD_AS3711
 130         help
 131           This driver provides support for the voltage regulators on the
 132           AS3711 PMIC
 133
 134 config REGULATOR_AS3722
 135         tristate "AMS AS3722 PMIC Regulators"
 136         depends on MFD_AS3722
 137         help
 138           This driver provides support for the voltage regulators on the
 139           AS3722 PMIC. This will enable support for all the software
 140           controllable DCDC/LDO regulators.
 141
 142 config REGULATOR_AXP20X
 143         tristate "X-POWERS AXP20X PMIC Regulators"
 144         depends on MFD_AXP20X
 145         help
 146           This driver provides support for the voltage regulators on the
 147           AXP20X PMIC.
 148
 149 config REGULATOR_BCM590XX
 150         tristate "Broadcom BCM590xx PMU Regulators"
 151         depends on MFD_BCM590XX
 152         help
 153           This driver provides support for the voltage regulators on the
 154           BCM590xx PMUs. This will enable support for the software
 155           controllable LDO/Switching regulators.
 156
 157 config REGULATOR_DA903X
 158         tristate "Dialog Semiconductor DA9030/DA9034 regulators"
 159         depends on PMIC_DA903X
 160         help
 161           Say y here to support the BUCKs and LDOs regulators found on
 162           Dialog Semiconductor DA9030/DA9034 PMIC.
 163
 164 config REGULATOR_DA9052
 165         tristate "Dialog Semiconductor DA9052/DA9053 regulators"
 166         depends on PMIC_DA9052
 167         help
 168           This driver supports the voltage regulators of DA9052-BC and
 169           DA9053-AA/Bx PMIC.
 170
 171 config REGULATOR_DA9055
 172         tristate "Dialog Semiconductor DA9055 regulators"
 173         depends on MFD_DA9055
 174         help
 175           Say y here to support the BUCKs and LDOs regulators found on
 176           Dialog Semiconductor DA9055 PMIC.
 177
 178           This driver can also be built as a module. If so, the module
 179           will be called da9055-regulator.
 180
 181 config REGULATOR_DA9062
 182         tristate "Dialog Semiconductor DA9062 regulators"
 183         depends on MFD_DA9062
 184         help
 185           Say y here to support the BUCKs and LDOs regulators found on
 186           DA9062 PMICs.
 187
 188           This driver can also be built as a module. If so, the module
 189           will be called da9062-regulator.
 190
 191 config REGULATOR_DA9063
 192         tristate "Dialog Semiconductor DA9063 regulators"
 193         depends on MFD_DA9063
 194         help
 195           Say y here to support the BUCKs and LDOs regulators found on
 196           DA9063 PMICs.
 197
 198           This driver can also be built as a module. If so, the module
 199           will be called da9063-regulator.
 200
 201 config REGULATOR_DA9210
 202         tristate "Dialog Semiconductor DA9210 regulator"
 203         depends on I2C
 204         select REGMAP_I2C
 205         help
 206           Say y here to support for the Dialog Semiconductor DA9210.
 207           The DA9210 is a multi-phase synchronous step down
 208           converter 12A DC-DC Buck controlled through an I2C
 209           interface.
 210
 211 config REGULATOR_DA9211
 212         tristate "Dialog Semiconductor DA9211/DA9212/DA9213/DA9214/DA9215 regulator"
 213         depends on I2C
 214         select REGMAP_I2C
 215         help
 216           Say y here to support for the Dialog Semiconductor DA9211/DA9212
 217           /DA9213/DA9214/DA9215.
 218           The DA9211/DA9212/DA9213/DA9214/DA9215 is a multi-phase synchronous
 219           step down converter 12A or 16A DC-DC Buck controlled through an I2C
 220           interface.
 221
 222 config REGULATOR_DBX500_PRCMU
 223         bool
 224
 225 config REGULATOR_DB8500_PRCMU
 226         bool "ST-Ericsson DB8500 Voltage Domain Regulators"
 227         depends on MFD_DB8500_PRCMU
 228         select REGULATOR_DBX500_PRCMU
 229         help
 230           This driver supports the voltage domain regulators controlled by the
 231           DB8500 PRCMU
 232
 233 config REGULATOR_FAN53555
 234         tristate "Fairchild FAN53555 Regulator"
 235         depends on I2C
 236         select REGMAP_I2C
 237         help
 238           This driver supports Fairchild FAN53555 Digitally Programmable
 239           TinyBuck Regulator. The FAN53555 is a step-down switching voltage
 240           regulator that delivers a digitally programmable output from an
 241           input voltage supply of 2.5V to 5.5V. The output voltage is
 242           programmed through an I2C interface.
 243
 244 config REGULATOR_GPIO
 245         tristate "GPIO regulator support"
 246         depends on GPIOLIB || COMPILE_TEST
 247         help
 248           This driver provides support for regulators that can be
 249           controlled via gpios.
 250           It is capable of supporting current and voltage regulators
 251           and the platform has to provide a mapping of GPIO-states
 252           to target volts/amps.
 253
 254 config REGULATOR_HI6421
 255         tristate "HiSilicon Hi6421 PMIC voltage regulator support"
 256         depends on MFD_HI6421_PMIC && OF
 257         help
 258           This driver provides support for the voltage regulators on the
 259           HiSilicon Hi6421 PMU / Codec IC.
 260           Hi6421 is a multi-function device which, on regulator part, provides
 261           21 general purpose LDOs, 3 dedicated LDOs, and 5 BUCKs. All
 262           of them come with support to either ECO (idle) or sleep mode.
 263
 264 config REGULATOR_ISL9305
 265         tristate "Intersil ISL9305 regulator"
 266         depends on I2C
 267         select REGMAP_I2C
 268         help
 269           This driver supports ISL9305 voltage regulator chip.
 270
 271 config REGULATOR_ISL6271A
 272         tristate "Intersil ISL6271A Power regulator"
 273         depends on I2C
 274         help
 275           This driver supports ISL6271A voltage regulator chip.
 276
 277 config REGULATOR_LM363X
 278         tristate "TI LM363X voltage regulators"
 279         depends on MFD_TI_LMU
 280         help
 281           This driver supports LM3631 and LM3632 voltage regulators for
 282           the LCD bias.
 283           One boost output voltage is configurable and always on.
 284           Other LDOs are used for the display module.
 285
 286 config REGULATOR_LP3971
 287         tristate "National Semiconductors LP3971 PMIC regulator driver"
 288         depends on I2C
 289         help
 290          Say Y here to support the voltage regulators and convertors
 291          on National Semiconductors LP3971 PMIC
 292
 293 config REGULATOR_LP3972
 294         tristate "National Semiconductors LP3972 PMIC regulator driver"
 295         depends on I2C
 296         help
 297          Say Y here to support the voltage regulators and convertors
 298          on National Semiconductors LP3972 PMIC
 299
 300 config REGULATOR_LP872X
 301         tristate "TI/National Semiconductor LP8720/LP8725 voltage regulators"
 302         depends on I2C
 303         select REGMAP_I2C
 304         help
 305           This driver supports LP8720/LP8725 PMIC
 306
 307 config REGULATOR_LP8755
 308         tristate "TI LP8755 High Performance PMU driver"
 309         depends on I2C
 310         select REGMAP_I2C
 311         help
 312           This driver supports LP8755 High Performance PMU driver. This
 313           chip contains six step-down DC/DC converters which can support
 314           9 mode multiphase configuration.
 315
 316 config REGULATOR_LP8788
 317         tristate "TI LP8788 Power Regulators"
 318         depends on MFD_LP8788
 319         help
 320           This driver supports LP8788 voltage regulator chip.
 321
 322 config REGULATOR_LTC3589
 323         tristate "LTC3589 8-output voltage regulator"
 324         depends on I2C
 325         select REGMAP_I2C
 326         help
 327           This enables support for the LTC3589, LTC3589-1, and LTC3589-2
 328           8-output regulators controlled via I2C.
 329
 330 config REGULATOR_MAX14577
 331         tristate "Maxim 14577/77836 regulator"
 332         depends on MFD_MAX14577
 333         help
 334           This driver controls a Maxim MAX14577/77836 regulator via I2C bus.
 335           The MAX14577 regulators include safeout LDO and charger current
 336           regulator. The MAX77836 has two additional LDOs.
 337
 338 config REGULATOR_MAX1586
 339         tristate "Maxim 1586/1587 voltage regulator"
 340         depends on I2C
 341         help
 342           This driver controls a Maxim 1586 or 1587 voltage output
 343           regulator via I2C bus. The provided regulator is suitable
 344           for PXA27x chips to control VCC_CORE and VCC_USIM voltages.
 345
 346 config REGULATOR_MAX77620
 347         tristate "Maxim 77620/MAX20024 voltage regulator"
 348         depends on MFD_MAX77620
 349         help
 350           This driver controls Maxim MAX77620 voltage output regulator
 351           via I2C bus. The provided regulator is suitable for Tegra
 352           chip to control Step-Down DC-DC and LDOs. Say Y here to
 353           enable the regulator driver.
 354
 355 config REGULATOR_MAX8649
 356         tristate "Maxim 8649 voltage regulator"
 357         depends on I2C
 358         select REGMAP_I2C
 359         help
 360           This driver controls a Maxim 8649 voltage output regulator via
 361           I2C bus.
 362
 363 config REGULATOR_MAX8660
 364         tristate "Maxim 8660/8661 voltage regulator"
 365         depends on I2C
 366         help
 367           This driver controls a Maxim 8660/8661 voltage output
 368           regulator via I2C bus.
 369
 370 config REGULATOR_MAX8907
 371         tristate "Maxim 8907 voltage regulator"
 372         depends on MFD_MAX8907
 373         help
 374           This driver controls a Maxim 8907 voltage output regulator
 375           via I2C bus. The provided regulator is suitable for Tegra
 376           chip to control Step-Down DC-DC and LDOs.
 377
 378 config REGULATOR_MAX8925
 379         tristate "Maxim MAX8925 Power Management IC"
 380         depends on MFD_MAX8925
 381         help
 382           Say y here to support the voltage regulaltor of Maxim MAX8925 PMIC.
 383
 384 config REGULATOR_MAX8952
 385         tristate "Maxim MAX8952 Power Management IC"
 386         depends on I2C
 387         help
 388           This driver controls a Maxim 8952 voltage output regulator
 389           via I2C bus. Maxim 8952 has one voltage output and supports 4 DVS
 390           modes ranging from 0.77V to 1.40V by 0.01V steps.
 391
 392 config REGULATOR_MAX8973
 393         tristate "Maxim MAX8973 voltage regulator "
 394         depends on I2C
 395         select REGMAP_I2C
 396         help
 397           The MAXIM MAX8973 high-efficiency. three phase, DC-DC step-down
 398           switching regulator delievers up to 9A of output current. Each
 399           phase operates at a 2MHz fixed frequency with a 120 deg shift
 400           from the adjacent phase, allowing the use of small magnetic component.
 401
 402 config REGULATOR_MAX8997
 403         tristate "Maxim 8997/8966 regulator"
 404         depends on MFD_MAX8997
 405         help
 406           This driver controls a Maxim 8997/8966 regulator
 407           via I2C bus. The provided regulator is suitable for S5PC110,
 408           S5PV210, and Exynos-4 chips to control VCC_CORE and
 409           VCC_USIM voltages.
 410
 411 config REGULATOR_MAX8998
 412         tristate "Maxim 8998 voltage regulator"
 413         depends on MFD_MAX8998
 414         help
 415           This driver controls a Maxim 8998 voltage output regulator
 416           via I2C bus. The provided regulator is suitable for S3C6410
 417           and S5PC1XX chips to control VCC_CORE and VCC_USIM voltages.
 418
 419 config REGULATOR_MAX77686
 420         tristate "Maxim 77686 regulator"
 421         depends on MFD_MAX77686
 422         help
 423           This driver controls a Maxim 77686 regulator
 424           via I2C bus. The provided regulator is suitable for
 425           Exynos-4 chips to control VARM and VINT voltages.
 426
 427 config REGULATOR_MAX77693
 428         tristate "Maxim 77693/77843 regulator"
 429         depends on (MFD_MAX77693 || MFD_MAX77843)
 430         help
 431           This driver controls a Maxim 77693/77843 regulators via I2C bus.
 432           The regulators include two LDOs, 'SAFEOUT1', 'SAFEOUT2'
 433           and one current regulator 'CHARGER'. This is suitable for
 434           Exynos-4x12 (MAX77693) or Exynos5433 (MAX77843) SoC chips.
 435
 436 config REGULATOR_MAX77802
 437         tristate "Maxim 77802 regulator"
 438         depends on MFD_MAX77686
 439         help
 440           This driver controls a Maxim 77802 regulator
 441           via I2C bus. The provided regulator is suitable for
 442           Exynos5420/Exynos5800 SoCs to control various voltages.
 443           It includes support for control of voltage and ramp speed.
 444
 445 config REGULATOR_MC13XXX_CORE
 446         tristate
 447
 448 config REGULATOR_MC13783
 449         tristate "Freescale MC13783 regulator driver"
 450         depends on MFD_MC13XXX
 451         select REGULATOR_MC13XXX_CORE
 452         help
 453           Say y here to support the regulators found on the Freescale MC13783
 454           PMIC.
 455
 456 config REGULATOR_MC13892
 457         tristate "Freescale MC13892 regulator driver"
 458         depends on MFD_MC13XXX
 459         select REGULATOR_MC13XXX_CORE
 460         help
 461           Say y here to support the regulators found on the Freescale MC13892
 462           PMIC.
 463
 464 config REGULATOR_MT6311
 465         tristate "MediaTek MT6311 PMIC"
 466         depends on I2C
 467         select REGMAP_I2C
 468         help
 469           Say y here to select this option to enable the power regulator of
 470           MediaTek MT6311 PMIC.
 471           This driver supports the control of different power rails of device
 472           through regulator interface.
 473
 474 config REGULATOR_MT6397
 475         tristate "MediaTek MT6397 PMIC"
 476         depends on MFD_MT6397
 477         help
 478           Say y here to select this option to enable the power regulator of
 479           MediaTek MT6397 PMIC.
 480           This driver supports the control of different power rails of device
 481           through regulator interface.
 482
 483 config REGULATOR_PALMAS
 484         tristate "TI Palmas PMIC Regulators"
 485         depends on MFD_PALMAS
 486         help
 487           If you wish to control the regulators on the Palmas series of
 488           chips say Y here. This will enable support for all the software
 489           controllable SMPS/LDO regulators.
 490
 491           The regulators available on Palmas series chips vary depending
 492           on the muxing. This is handled automatically in the driver by
 493           reading the mux info from OTP.
 494
 495 config REGULATOR_PBIAS
 496         tristate "PBIAS OMAP regulator driver"
 497         depends on (ARCH_OMAP || COMPILE_TEST) && MFD_SYSCON
 498         help
 499          Say y here to support pbias regulator for mmc1:SD card i/o
 500          on OMAP SoCs.
 501          This driver provides support for OMAP pbias modelled
 502          regulators.
 503
 504 config REGULATOR_PCAP
 505         tristate "Motorola PCAP2 regulator driver"
 506         depends on EZX_PCAP
 507         help
 508          This driver provides support for the voltage regulators of the
 509          PCAP2 PMIC.
 510
 511 config REGULATOR_PCF50633
 512         tristate "NXP PCF50633 regulator driver"
 513         depends on MFD_PCF50633
 514         help
 515          Say Y here to support the voltage regulators and convertors
 516          on PCF50633
 517
 518 config REGULATOR_PFUZE100
 519         tristate "Freescale PFUZE100/PFUZE200 regulator driver"
 520         depends on I2C
 521         select REGMAP_I2C
 522         help
 523           Say y here to support the regulators found on the Freescale
 524           PFUZE100/PFUZE200 PMIC.
 525
 526 config REGULATOR_PV88060
 527         tristate "Powerventure Semiconductor PV88060 regulator"
 528         depends on I2C
 529         select REGMAP_I2C
 530         help
 531           Say y here to support the voltage regulators and convertors
 532           PV88060
 533
 534 config REGULATOR_PV88090
 535         tristate "Powerventure Semiconductor PV88090 regulator"
 536         depends on I2C
 537         select REGMAP_I2C
 538         help
 539           Say y here to support the voltage regulators and convertors
 540           on PV88090
 541
 542 config REGULATOR_PWM
 543         tristate "PWM voltage regulator"
 544         depends on PWM
 545         help
 546           This driver supports PWM controlled voltage regulators. PWM
 547           duty cycle can increase or decrease the voltage.
 548
 549 config REGULATOR_QCOM_RPM
 550         tristate "Qualcomm RPM regulator driver"
 551         depends on MFD_QCOM_RPM
 552         help
 553           If you say yes to this option, support will be included for the
 554           regulators exposed by the Resource Power Manager found in Qualcomm
 555           8660, 8960 and 8064 based devices.
 556
 557           Say M here if you want to include support for the regulators on the
 558           Qualcomm RPM as a module. The module will be named
 559           "qcom_rpm-regulator".
 560
 561 config REGULATOR_QCOM_SMD_RPM
 562         tristate "Qualcomm SMD based RPM regulator driver"
 563         depends on QCOM_SMD_RPM
 564         help
 565           If you say yes to this option, support will be included for the
 566           regulators exposed by the Resource Power Manager found in Qualcomm
 567           8974 based devices.
 568
 569           Say M here if you want to include support for the regulators on the
 570           Qualcomm RPM as a module. The module will be named
 571           "qcom_smd-regulator".
 572
 573 config REGULATOR_QCOM_SPMI
 574         tristate "Qualcomm SPMI regulator driver"
 575         depends on SPMI || COMPILE_TEST
 576         help
 577           If you say yes to this option, support will be included for the
 578           regulators found in Qualcomm SPMI PMICs.
 579
 580           Say M here if you want to include support for the regulators on the
 581           Qualcomm SPMI PMICs as a module. The module will be named
 582           "qcom_spmi-regulator".
 583
 584 config REGULATOR_RC5T583
 585         tristate "RICOH RC5T583 Power regulators"
 586         depends on MFD_RC5T583
 587         help
 588           Select this option to enable the power regulator of RICOH
 589           PMIC RC5T583.
 590           This driver supports the control of different power rails of device
 591           through regulator interface. The device supports multiple DCDC/LDO
 592           outputs which can be controlled by i2c communication.
 593
 594 config REGULATOR_RK808
 595         tristate "Rockchip RK808 Power regulators"
 596         depends on MFD_RK808
 597         help
 598           Select this option to enable the power regulator of ROCKCHIP
 599           PMIC RK808.
 600           This driver supports the control of different power rails of device
 601           through regulator interface. The device supports multiple DCDC/LDO
 602           outputs which can be controlled by i2c communication.
 603
 604 config REGULATOR_RN5T618
 605         tristate "Ricoh RN5T618 voltage regulators"
 606         depends on MFD_RN5T618
 607         help
 608           Say y here to support the regulators found on Ricoh RN5T618 PMIC.
 609
 610 config REGULATOR_RT5033
 611         tristate "Richtek RT5033 Regulators"
 612         depends on MFD_RT5033
 613         help
 614           This adds support for voltage and current regulators in Richtek
 615           RT5033 PMIC. The device supports multiple regulators like
 616           current source, LDO and Buck.
 617
 618 config REGULATOR_S2MPA01
 619         tristate "Samsung S2MPA01 voltage regulator"
 620         depends on MFD_SEC_CORE
 621         help
 622          This driver controls Samsung S2MPA01 voltage output regulator
 623          via I2C bus. S2MPA01 has 10 Bucks and 26 LDO outputs.
 624
 625 config REGULATOR_S2MPS11
 626         tristate "Samsung S2MPS11/13/14/15/S2MPU02 voltage regulator"
 627         depends on MFD_SEC_CORE
 628         help
 629          This driver supports a Samsung S2MPS11/13/14/15/S2MPU02 voltage
 630          output regulator via I2C bus. The chip is comprised of high efficient
 631          Buck converters including Dual-Phase Buck converter, Buck-Boost
 632          converter, various LDOs.
 633
 634 config REGULATOR_S5M8767
 635         tristate "Samsung S5M8767A voltage regulator"
 636         depends on MFD_SEC_CORE
 637         help
 638          This driver supports a Samsung S5M8767A voltage output regulator
 639          via I2C bus. S5M8767A have 9 Bucks and 28 LDOs output and
 640          supports DVS mode with 8bits of output voltage control.
 641
 642 config REGULATOR_SKY81452
 643         tristate "Skyworks Solutions SKY81452 voltage regulator"
 644         depends on MFD_SKY81452
 645         help
 646           This driver supports Skyworks SKY81452 voltage output regulator
 647           via I2C bus. SKY81452 has one voltage linear regulator can be
 648           programmed from 4.5V to 20V.
 649
 650           This driver can also be built as a module. If so, the module
 651           will be called sky81452-regulator.
 652
 653 config REGULATOR_TI_ABB
 654         tristate "TI Adaptive Body Bias on-chip LDO"
 655         depends on ARCH_OMAP
 656         help
 657           Select this option to support Texas Instruments' on-chip Adaptive Body
 658           Bias (ABB) LDO regulators. It is recommended that this option be
 659           enabled on required TI SoC. Certain Operating Performance Points
 660           on TI SoCs may be unstable without enabling this as it provides
 661           device specific optimized bias to allow/optimize functionality.
 662
 663 config REGULATOR_STW481X_VMMC
 664         bool "ST Microelectronics STW481X VMMC regulator"
 665         depends on MFD_STW481X || COMPILE_TEST
 666         default y if MFD_STW481X
 667         help
 668           This driver supports the internal VMMC regulator in the STw481x
 669           PMIC chips.
 670
 671 config REGULATOR_TPS51632
 672         tristate "TI TPS51632 Power Regulator"
 673         depends on I2C
 674         select REGMAP_I2C
 675         help
 676           This driver supports TPS51632 voltage regulator chip.
 677           The TPS51632 is 3-2-1 Phase D-Cap+ Step Down Driverless Controller
 678           with Serial VID control and DVFS.
 679           The voltage output can be configure through I2C interface or PWM
 680           interface.
 681
 682 config REGULATOR_TPS6105X
 683         tristate "TI TPS6105X Power regulators"
 684         depends on TPS6105X
 685         default y if TPS6105X
 686         help
 687           This driver supports TPS61050/TPS61052 voltage regulator chips.
 688           It is a single boost converter primarily for white LEDs and
 689           audio amplifiers.
 690
 691 config REGULATOR_TPS62360
 692         tristate "TI TPS6236x Power Regulator"
 693         depends on I2C
 694         select REGMAP_I2C
 695         help
 696           This driver supports TPS6236x voltage regulator chip. This
 697           regulator is meant for processor core supply. This chip is
 698           high-frequency synchronous step down dc-dc converter optimized
 699           for battery-powered portable applications.
 700
 701 config REGULATOR_TPS65023
 702         tristate "TI TPS65023 Power regulators"
 703         depends on I2C
 704         select REGMAP_I2C
 705         help
 706           This driver supports TPS65023 voltage regulator chips. TPS65023 provides
 707           three step-down converters and two general-purpose LDO voltage regulators.
 708           It supports TI's software based Class-2 SmartReflex implementation.
 709
 710 config REGULATOR_TPS6507X
 711         tristate "TI TPS6507X Power regulators"
 712         depends on I2C
 713         help
 714           This driver supports TPS6507X voltage regulator chips. TPS6507X provides
 715           three step-down converters and two general-purpose LDO voltage regulators.
 716           It supports TI's software based Class-2 SmartReflex implementation.
 717
 718 config REGULATOR_TPS65086
 719         tristate "TI TPS65086 Power regulators"
 720         depends on MFD_TPS65086
 721         help
 722           This driver provides support for the voltage regulators on
 723           TI TPS65086 PMICs.
 724
 725 config REGULATOR_TPS65090
 726         tristate "TI TPS65090 Power regulator"
 727         depends on MFD_TPS65090
 728         help
 729           This driver provides support for the voltage regulators on the
 730           TI TPS65090 PMIC.
 731
 732 config REGULATOR_TPS65217
 733         tristate "TI TPS65217 Power regulators"
 734         depends on MFD_TPS65217
 735         help
 736           This driver supports TPS65217 voltage regulator chips. TPS65217
 737           provides three step-down converters and four general-purpose LDO
 738           voltage regulators. It supports software based voltage control
 739           for different voltage domains
 740
 741 config REGULATOR_TPS65218
 742         tristate "TI TPS65218 Power regulators"
 743         depends on MFD_TPS65218 && OF
 744         help
 745           This driver supports TPS65218 voltage regulator chips. TPS65218
 746           provides six step-down converters and one general-purpose LDO
 747           voltage regulators. It supports software based voltage control
 748           for different voltage domains
 749
 750 config REGULATOR_TPS6524X
 751         tristate "TI TPS6524X Power regulators"
 752         depends on SPI
 753         help
 754           This driver supports TPS6524X voltage regulator chips. TPS6524X
 755           provides three step-down converters and two general-purpose LDO
 756           voltage regulators.  This device is interfaced using a customized
 757           serial interface currently supported on the sequencer serial
 758           port controller.
 759
 760 config REGULATOR_TPS6586X
 761         tristate "TI TPS6586X Power regulators"
 762         depends on MFD_TPS6586X
 763         help
 764           This driver supports TPS6586X voltage regulator chips.
 765
 766 config REGULATOR_TPS65910
 767         tristate "TI TPS65910/TPS65911 Power Regulators"
 768         depends on MFD_TPS65910
 769         help
 770           This driver supports TPS65910/TPS65911 voltage regulator chips.
 771
 772 config REGULATOR_TPS65912
 773         tristate "TI TPS65912 Power regulator"
 774         depends on (MFD_TPS65912_I2C || MFD_TPS65912_SPI)
 775         help
 776             This driver supports TPS65912 voltage regulator chip.
 777
 778 config REGULATOR_TPS80031
 779         tristate "TI TPS80031/TPS80032 power regualtor driver"
 780         depends on MFD_TPS80031
 781         help
 782           TPS80031/ TPS80032 Fully Integrated Power Management with Power
 783           Path and Battery Charger. It has 5 configurable step-down
 784           converters, 11 general purpose LDOs, VBUS generator and digital
 785           output to control regulators.
 786
 787 config REGULATOR_TWL4030
 788         tristate "TI TWL4030/TWL5030/TWL6030/TPS659x0 PMIC"
 789         depends on TWL4030_CORE
 790         help
 791           This driver supports the voltage regulators provided by
 792           this family of companion chips.
 793
 794 config REGULATOR_VEXPRESS
 795         tristate "Versatile Express regulators"
 796         depends on VEXPRESS_CONFIG
 797         help
 798           This driver provides support for voltage regulators available
 799           on the ARM Ltd's Versatile Express platform.
 800
 801 config REGULATOR_WM831X
 802         tristate "Wolfson Microelectronics WM831x PMIC regulators"
 803         depends on MFD_WM831X
 804         help
 805           Support the voltage and current regulators of the WM831x series
 806           of PMIC devices.
 807
 808 config REGULATOR_WM8350
 809         tristate "Wolfson Microelectronics WM8350 AudioPlus PMIC"
 810         depends on MFD_WM8350
 811         help
 812           This driver provides support for the voltage and current regulators
 813           of the WM8350 AudioPlus PMIC.
 814
 815 config REGULATOR_WM8400
 816         tristate "Wolfson Microelectronics WM8400 AudioPlus PMIC"
 817         depends on MFD_WM8400
 818         help
 819           This driver provides support for the voltage regulators of the
 820           WM8400 AudioPlus PMIC.
 821
 822 config REGULATOR_WM8994
 823         tristate "Wolfson Microelectronics WM8994 CODEC"
 824         depends on MFD_WM8994
 825         help
 826           This driver provides support for the voltage regulators on the
 827           WM8994 CODEC.
 828
 829 endif
 830