drivers/scsi/hpsa_cmd.h

   1 /*
   2  *    Disk Array driver for HP Smart Array SAS controllers
   3  *    Copyright 2014-2015 PMC-Sierra, Inc.
   4  *    Copyright 2000,2009-2015 Hewlett-Packard Development Company, L.P.
   5  *
   6  *    This program is free software; you can redistribute it and/or modify
   7  *    it under the terms of the GNU General Public License as published by
   8  *    the Free Software Foundation; version 2 of the License.
   9  *
  10  *    This program is distributed in the hope that it will be useful,
  11  *    but WITHOUT ANY WARRANTY; without even the implied warranty of
  12  *    MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
  13  *    NON INFRINGEMENT.  See the GNU General Public License for more details.
  14  *
  15  *    Questions/Comments/Bugfixes to storagedev@pmcs.com
  16  *
  17  */
  18 #ifndef HPSA_CMD_H
  19 #define HPSA_CMD_H
  20
  21 /* general boundary defintions */
  22 #define SENSEINFOBYTES          32 /* may vary between hbas */
  23 #define SG_ENTRIES_IN_CMD       32 /* Max SG entries excluding chain blocks */
  24 #define HPSA_SG_CHAIN           0x80000000
  25 #define HPSA_SG_LAST            0x40000000
  26 #define MAXREPLYQS              256
  27
  28 /* Command Status value */
  29 #define CMD_SUCCESS             0x0000
  30 #define CMD_TARGET_STATUS       0x0001
  31 #define CMD_DATA_UNDERRUN       0x0002
  32 #define CMD_DATA_OVERRUN        0x0003
  33 #define CMD_INVALID             0x0004
  34 #define CMD_PROTOCOL_ERR        0x0005
  35 #define CMD_HARDWARE_ERR        0x0006
  36 #define CMD_CONNECTION_LOST     0x0007
  37 #define CMD_ABORTED             0x0008
  38 #define CMD_ABORT_FAILED        0x0009
  39 #define CMD_UNSOLICITED_ABORT   0x000A
  40 #define CMD_TIMEOUT             0x000B
  41 #define CMD_UNABORTABLE         0x000C
  42 #define CMD_TMF_STATUS          0x000D
  43 #define CMD_IOACCEL_DISABLED    0x000E
  44 #define CMD_CTLR_LOCKUP         0xffff
  45 /* Note: CMD_CTLR_LOCKUP is not a value defined by the CISS spec
  46  * it is a value defined by the driver that commands can be marked
  47  * with when a controller lockup has been detected by the driver
  48  */
  49
  50 /* TMF function status values */
  51 #define CISS_TMF_COMPLETE       0x00
  52 #define CISS_TMF_INVALID_FRAME  0x02
  53 #define CISS_TMF_NOT_SUPPORTED  0x04
  54 #define CISS_TMF_FAILED         0x05
  55 #define CISS_TMF_SUCCESS        0x08
  56 #define CISS_TMF_WRONG_LUN      0x09
  57 #define CISS_TMF_OVERLAPPED_TAG 0x0a
  58
  59 /* Unit Attentions ASC's as defined for the MSA2012sa */
  60 #define POWER_OR_RESET                  0x29
  61 #define STATE_CHANGED                   0x2a
  62 #define UNIT_ATTENTION_CLEARED          0x2f
  63 #define LUN_FAILED                      0x3e
  64 #define REPORT_LUNS_CHANGED             0x3f
  65
  66 /* Unit Attentions ASCQ's as defined for the MSA2012sa */
  67
  68         /* These ASCQ's defined for ASC = POWER_OR_RESET */
  69 #define POWER_ON_RESET                  0x00
  70 #define POWER_ON_REBOOT                 0x01
  71 #define SCSI_BUS_RESET                  0x02
  72 #define MSA_TARGET_RESET                0x03
  73 #define CONTROLLER_FAILOVER             0x04
  74 #define TRANSCEIVER_SE                  0x05
  75 #define TRANSCEIVER_LVD                 0x06
  76
  77         /* These ASCQ's defined for ASC = STATE_CHANGED */
  78 #define RESERVATION_PREEMPTED           0x03
  79 #define ASYM_ACCESS_CHANGED             0x06
  80 #define LUN_CAPACITY_CHANGED            0x09
  81
  82 /* transfer direction */
  83 #define XFER_NONE               0x00
  84 #define XFER_WRITE              0x01
  85 #define XFER_READ               0x02
  86 #define XFER_RSVD               0x03
  87
  88 /* task attribute */
  89 #define ATTR_UNTAGGED           0x00
  90 #define ATTR_SIMPLE             0x04
  91 #define ATTR_HEADOFQUEUE        0x05
  92 #define ATTR_ORDERED            0x06
  93 #define ATTR_ACA                0x07
  94
  95 /* cdb type */
  96 #define TYPE_CMD                0x00
  97 #define TYPE_MSG                0x01
  98 #define TYPE_IOACCEL2_CMD       0x81 /* 0x81 is not used by hardware */
  99
 100 /* Message Types  */
 101 #define HPSA_TASK_MANAGEMENT    0x00
 102 #define HPSA_RESET              0x01
 103 #define HPSA_SCAN               0x02
 104 #define HPSA_NOOP               0x03
 105
 106 #define HPSA_CTLR_RESET_TYPE    0x00
 107 #define HPSA_BUS_RESET_TYPE     0x01
 108 #define HPSA_TARGET_RESET_TYPE  0x03
 109 #define HPSA_LUN_RESET_TYPE     0x04
 110 #define HPSA_NEXUS_RESET_TYPE   0x05
 111
 112 /* Task Management Functions */
 113 #define HPSA_TMF_ABORT_TASK     0x00
 114 #define HPSA_TMF_ABORT_TASK_SET 0x01
 115 #define HPSA_TMF_CLEAR_ACA      0x02
 116 #define HPSA_TMF_CLEAR_TASK_SET 0x03
 117 #define HPSA_TMF_QUERY_TASK     0x04
 118 #define HPSA_TMF_QUERY_TASK_SET 0x05
 119 #define HPSA_TMF_QUERY_ASYNCEVENT 0x06
 120
 121
 122
 123 /* config space register offsets */
 124 #define CFG_VENDORID            0x00
 125 #define CFG_DEVICEID            0x02
 126 #define CFG_I2OBAR              0x10
 127 #define CFG_MEM1BAR             0x14
 128
 129 /* i2o space register offsets */
 130 #define I2O_IBDB_SET            0x20
 131 #define I2O_IBDB_CLEAR          0x70
 132 #define I2O_INT_STATUS          0x30
 133 #define I2O_INT_MASK            0x34
 134 #define I2O_IBPOST_Q            0x40
 135 #define I2O_OBPOST_Q            0x44
 136 #define I2O_DMA1_CFG            0x214
 137
 138 /* Configuration Table */
 139 #define CFGTBL_ChangeReq        0x00000001l
 140 #define CFGTBL_AccCmds          0x00000001l
 141 #define DOORBELL_CTLR_RESET     0x00000004l
 142 #define DOORBELL_CTLR_RESET2    0x00000020l
 143 #define DOORBELL_CLEAR_EVENTS   0x00000040l
 144
 145 #define CFGTBL_Trans_Simple     0x00000002l
 146 #define CFGTBL_Trans_Performant 0x00000004l
 147 #define CFGTBL_Trans_io_accel1  0x00000080l
 148 #define CFGTBL_Trans_io_accel2  0x00000100l
 149 #define CFGTBL_Trans_use_short_tags 0x20000000l
 150 #define CFGTBL_Trans_enable_directed_msix (1 << 30)
 151
 152 #define CFGTBL_BusType_Ultra2   0x00000001l
 153 #define CFGTBL_BusType_Ultra3   0x00000002l
 154 #define CFGTBL_BusType_Fibre1G  0x00000100l
 155 #define CFGTBL_BusType_Fibre2G  0x00000200l
 156
 157 /* VPD Inquiry types */
 158 #define HPSA_VPD_SUPPORTED_PAGES        0x00
 159 #define HPSA_VPD_LV_DEVICE_GEOMETRY     0xC1
 160 #define HPSA_VPD_LV_IOACCEL_STATUS      0xC2
 161 #define HPSA_VPD_LV_STATUS              0xC3
 162 #define HPSA_VPD_HEADER_SZ              4
 163
 164 /* Logical volume states */
 165 #define HPSA_VPD_LV_STATUS_UNSUPPORTED                  0xff
 166 #define HPSA_LV_OK                                      0x0
 167 #define HPSA_LV_NOT_AVAILABLE                           0x0b
 168 #define HPSA_LV_UNDERGOING_ERASE                        0x0F
 169 #define HPSA_LV_UNDERGOING_RPI                          0x12
 170 #define HPSA_LV_PENDING_RPI                             0x13
 171 #define HPSA_LV_ENCRYPTED_NO_KEY                        0x14
 172 #define HPSA_LV_PLAINTEXT_IN_ENCRYPT_ONLY_CONTROLLER    0x15
 173 #define HPSA_LV_UNDERGOING_ENCRYPTION                   0x16
 174 #define HPSA_LV_UNDERGOING_ENCRYPTION_REKEYING          0x17
 175 #define HPSA_LV_ENCRYPTED_IN_NON_ENCRYPTED_CONTROLLER   0x18
 176 #define HPSA_LV_PENDING_ENCRYPTION                      0x19
 177 #define HPSA_LV_PENDING_ENCRYPTION_REKEYING             0x1A
 178
 179 struct vals32 {
 180         u32   lower;
 181         u32   upper;
 182 };
 183
 184 union u64bit {
 185         struct vals32 val32;
 186         u64 val;
 187 };
 188
 189 /* FIXME this is a per controller value (barf!) */
 190 #define HPSA_MAX_LUN 1024
 191 #define HPSA_MAX_PHYS_LUN 1024
 192 #define MAX_EXT_TARGETS 32
 193 #define HPSA_MAX_DEVICES (HPSA_MAX_PHYS_LUN + HPSA_MAX_LUN + \
 194         MAX_EXT_TARGETS + 1) /* + 1 is for the controller itself */
 195
 196 /* SCSI-3 Commands */
 197 #pragma pack(1)
 198
 199 #define HPSA_INQUIRY 0x12
 200 struct InquiryData {
 201         u8 data_byte[36];
 202 };
 203
 204 #define HPSA_REPORT_LOG 0xc2    /* Report Logical LUNs */
 205 #define HPSA_REPORT_PHYS 0xc3   /* Report Physical LUNs */
 206 #define HPSA_REPORT_PHYS_EXTENDED 0x02
 207 #define HPSA_CISS_READ  0xc0    /* CISS Read */
 208 #define HPSA_GET_RAID_MAP 0xc8  /* CISS Get RAID Layout Map */
 209
 210 #define RAID_MAP_MAX_ENTRIES   256
 211
 212 struct raid_map_disk_data {
 213         u32   ioaccel_handle;         /**< Handle to access this disk via the
 214                                         *  I/O accelerator */
 215         u8    xor_mult[2];            /**< XOR multipliers for this position,
 216                                         *  valid for data disks only */
 217         u8    reserved[2];
 218 };
 219
 220 struct raid_map_data {
 221         __le32   structure_size;        /* Size of entire structure in bytes */
 222         __le32   volume_blk_size;       /* bytes / block in the volume */
 223         __le64   volume_blk_cnt;        /* logical blocks on the volume */
 224         u8    phys_blk_shift;           /* Shift factor to convert between
 225                                          * units of logical blocks and physical
 226                                          * disk blocks */
 227         u8    parity_rotation_shift;    /* Shift factor to convert between units
 228                                          * of logical stripes and physical
 229                                          * stripes */
 230         __le16   strip_size;            /* blocks used on each disk / stripe */
 231         __le64   disk_starting_blk;     /* First disk block used in volume */
 232         __le64   disk_blk_cnt;          /* disk blocks used by volume / disk */
 233         __le16   data_disks_per_row;    /* data disk entries / row in the map */
 234         __le16   metadata_disks_per_row;/* mirror/parity disk entries / row
 235                                          * in the map */
 236         __le16   row_cnt;               /* rows in each layout map */
 237         __le16   layout_map_count;      /* layout maps (1 map per mirror/parity
 238                                          * group) */
 239         __le16   flags;                 /* Bit 0 set if encryption enabled */
 240 #define RAID_MAP_FLAG_ENCRYPT_ON  0x01
 241         __le16   dekindex;              /* Data encryption key index. */
 242         u8    reserved[16];
 243         struct raid_map_disk_data data[RAID_MAP_MAX_ENTRIES];
 244 };
 245
 246 struct ReportLUNdata {
 247         u8 LUNListLength[4];
 248         u8 extended_response_flag;
 249         u8 reserved[3];
 250         u8 LUN[HPSA_MAX_LUN][8];
 251 };
 252
 253 struct ext_report_lun_entry {
 254         u8 lunid[8];
 255 #define MASKED_DEVICE(x) ((x)[3] & 0xC0)
 256 #define GET_BMIC_BUS(lunid) ((lunid)[7] & 0x3F)
 257 #define GET_BMIC_LEVEL_TWO_TARGET(lunid) ((lunid)[6])
 258 #define GET_BMIC_DRIVE_NUMBER(lunid) (((GET_BMIC_BUS((lunid)) - 1) << 8) + \
 259                         GET_BMIC_LEVEL_TWO_TARGET((lunid)))
 260         u8 wwid[8];
 261         u8 device_type;
 262         u8 device_flags;
 263 #define NON_DISK_PHYS_DEV(x) ((x)[17] & 0x01)
 264 #define PHYS_IOACCEL(x) ((x)[17] & 0x08)
 265         u8 lun_count; /* multi-lun device, how many luns */
 266         u8 redundant_paths;
 267         u32 ioaccel_handle; /* ioaccel1 only uses lower 16 bits */
 268 };
 269
 270 struct ReportExtendedLUNdata {
 271         u8 LUNListLength[4];
 272         u8 extended_response_flag;
 273         u8 reserved[3];
 274         struct ext_report_lun_entry LUN[HPSA_MAX_PHYS_LUN];
 275 };
 276
 277 struct SenseSubsystem_info {
 278         u8 reserved[36];
 279         u8 portname[8];
 280         u8 reserved1[1108];
 281 };
 282
 283 /* BMIC commands */
 284 #define BMIC_READ 0x26
 285 #define BMIC_WRITE 0x27
 286 #define BMIC_CACHE_FLUSH 0xc2
 287 #define HPSA_CACHE_FLUSH 0x01   /* C2 was already being used by HPSA */
 288 #define BMIC_FLASH_FIRMWARE 0xF7
 289 #define BMIC_SENSE_CONTROLLER_PARAMETERS 0x64
 290 #define BMIC_IDENTIFY_PHYSICAL_DEVICE 0x15
 291
 292 /* Command List Structure */
 293 union SCSI3Addr {
 294         struct {
 295                 u8 Dev;
 296                 u8 Bus:6;
 297                 u8 Mode:2;        /* b00 */
 298         } PeripDev;
 299         struct {
 300                 u8 DevLSB;
 301                 u8 DevMSB:6;
 302                 u8 Mode:2;        /* b01 */
 303         } LogDev;
 304         struct {
 305                 u8 Dev:5;
 306                 u8 Bus:3;
 307                 u8 Targ:6;
 308                 u8 Mode:2;        /* b10 */
 309         } LogUnit;
 310 };
 311
 312 struct PhysDevAddr {
 313         u32             TargetId:24;
 314         u32             Bus:6;
 315         u32             Mode:2;
 316         /* 2 level target device addr */
 317         union SCSI3Addr  Target[2];
 318 };
 319
 320 struct LogDevAddr {
 321         u32            VolId:30;
 322         u32            Mode:2;
 323         u8             reserved[4];
 324 };
 325
 326 union LUNAddr {
 327         u8               LunAddrBytes[8];
 328         union SCSI3Addr    SCSI3Lun[4];
 329         struct PhysDevAddr PhysDev;
 330         struct LogDevAddr  LogDev;
 331 };
 332
 333 struct CommandListHeader {
 334         u8              ReplyQueue;
 335         u8              SGList;
 336         __le16          SGTotal;
 337         __le64          tag;
 338         union LUNAddr     LUN;
 339 };
 340
 341 struct RequestBlock {
 342         u8   CDBLen;
 343         /*
 344          * type_attr_dir:
 345          * type: low 3 bits
 346          * attr: middle 3 bits
 347          * dir: high 2 bits
 348          */
 349         u8      type_attr_dir;
 350 #define TYPE_ATTR_DIR(t, a, d) ((((d) & 0x03) << 6) |\
 351                                 (((a) & 0x07) << 3) |\
 352                                 ((t) & 0x07))
 353 #define GET_TYPE(tad) ((tad) & 0x07)
 354 #define GET_ATTR(tad) (((tad) >> 3) & 0x07)
 355 #define GET_DIR(tad) (((tad) >> 6) & 0x03)
 356         u16  Timeout;
 357         u8   CDB[16];
 358 };
 359
 360 struct ErrDescriptor {
 361         __le64 Addr;
 362         __le32 Len;
 363 };
 364
 365 struct SGDescriptor {
 366         __le64 Addr;
 367         __le32 Len;
 368         __le32 Ext;
 369 };
 370
 371 union MoreErrInfo {
 372         struct {
 373                 u8  Reserved[3];
 374                 u8  Type;
 375                 u32 ErrorInfo;
 376         } Common_Info;
 377         struct {
 378                 u8  Reserved[2];
 379                 u8  offense_size; /* size of offending entry */
 380                 u8  offense_num;  /* byte # of offense 0-base */
 381                 u32 offense_value;
 382         } Invalid_Cmd;
 383 };
 384 struct ErrorInfo {
 385         u8               ScsiStatus;
 386         u8               SenseLen;
 387         u16              CommandStatus;
 388         u32              ResidualCnt;
 389         union MoreErrInfo  MoreErrInfo;
 390         u8               SenseInfo[SENSEINFOBYTES];
 391 };
 392 /* Command types */
 393 #define CMD_IOCTL_PEND  0x01
 394 #define CMD_SCSI        0x03
 395 #define CMD_IOACCEL1    0x04
 396 #define CMD_IOACCEL2    0x05
 397 #define IOACCEL2_TMF    0x06
 398
 399 #define DIRECT_LOOKUP_SHIFT 4
 400 #define DIRECT_LOOKUP_MASK (~((1 << DIRECT_LOOKUP_SHIFT) - 1))
 401
 402 #define HPSA_ERROR_BIT          0x02
 403 struct ctlr_info; /* defined in hpsa.h */
 404 /* The size of this structure needs to be divisible by 128
 405  * on all architectures.  The low 4 bits of the addresses
 406  * are used as follows:
 407  *
 408  * bit 0: to device, used to indicate "performant mode" command
 409  *        from device, indidcates error status.
 410  * bit 1-3: to device, indicates block fetch table entry for
 411  *          reducing DMA in fetching commands from host memory.
 412  */
 413
 414 #define COMMANDLIST_ALIGNMENT 128
 415 struct CommandList {
 416         struct CommandListHeader Header;
 417         struct RequestBlock      Request;
 418         struct ErrDescriptor     ErrDesc;
 419         struct SGDescriptor      SG[SG_ENTRIES_IN_CMD];
 420         /* information associated with the command */
 421         u32                        busaddr; /* physical addr of this record */
 422         struct ErrorInfo *err_info; /* pointer to the allocated mem */
 423         struct ctlr_info           *h;
 424         int                        cmd_type;
 425         long                       cmdindex;
 426         struct completion *waiting;
 427         struct scsi_cmnd *scsi_cmd;
 428         struct work_struct work;
 429
 430         /*
 431          * For commands using either of the two "ioaccel" paths to
 432          * bypass the RAID stack and go directly to the physical disk
 433          * phys_disk is a pointer to the hpsa_scsi_dev_t to which the
 434          * i/o is destined.  We need to store that here because the command
 435          * may potentially encounter TASK SET FULL and need to be resubmitted
 436          * For "normal" i/o's not using the "ioaccel" paths, phys_disk is
 437          * not used.
 438          */
 439         struct hpsa_scsi_dev_t *phys_disk;
 440
 441         int abort_pending;
 442         struct hpsa_scsi_dev_t *reset_pending;
 443         atomic_t refcount; /* Must be last to avoid memset in hpsa_cmd_init() */
 444 } __aligned(COMMANDLIST_ALIGNMENT);
 445
 446 /* Max S/G elements in I/O accelerator command */
 447 #define IOACCEL1_MAXSGENTRIES           24
 448 #define IOACCEL2_MAXSGENTRIES           28
 449
 450 /*
 451  * Structure for I/O accelerator (mode 1) commands.
 452  * Note that this structure must be 128-byte aligned in size.
 453  */
 454 #define IOACCEL1_COMMANDLIST_ALIGNMENT 128
 455 struct io_accel1_cmd {
 456         __le16 dev_handle;              /* 0x00 - 0x01 */
 457         u8  reserved1;                  /* 0x02 */
 458         u8  function;                   /* 0x03 */
 459         u8  reserved2[8];               /* 0x04 - 0x0B */
 460         u32 err_info;                   /* 0x0C - 0x0F */
 461         u8  reserved3[2];               /* 0x10 - 0x11 */
 462         u8  err_info_len;               /* 0x12 */
 463         u8  reserved4;                  /* 0x13 */
 464         u8  sgl_offset;                 /* 0x14 */
 465         u8  reserved5[7];               /* 0x15 - 0x1B */
 466         __le32 transfer_len;            /* 0x1C - 0x1F */
 467         u8  reserved6[4];               /* 0x20 - 0x23 */
 468         __le16 io_flags;                /* 0x24 - 0x25 */
 469         u8  reserved7[14];              /* 0x26 - 0x33 */
 470         u8  LUN[8];                     /* 0x34 - 0x3B */
 471         __le32 control;                 /* 0x3C - 0x3F */
 472         u8  CDB[16];                    /* 0x40 - 0x4F */
 473         u8  reserved8[16];              /* 0x50 - 0x5F */
 474         __le16 host_context_flags;      /* 0x60 - 0x61 */
 475         __le16 timeout_sec;             /* 0x62 - 0x63 */
 476         u8  ReplyQueue;                 /* 0x64 */
 477         u8  reserved9[3];               /* 0x65 - 0x67 */
 478         __le64 tag;                     /* 0x68 - 0x6F */
 479         __le64 host_addr;               /* 0x70 - 0x77 */
 480         u8  CISS_LUN[8];                /* 0x78 - 0x7F */
 481         struct SGDescriptor SG[IOACCEL1_MAXSGENTRIES];
 482 } __aligned(IOACCEL1_COMMANDLIST_ALIGNMENT);
 483
 484 #define IOACCEL1_FUNCTION_SCSIIO        0x00
 485 #define IOACCEL1_SGLOFFSET              32
 486
 487 #define IOACCEL1_IOFLAGS_IO_REQ         0x4000
 488 #define IOACCEL1_IOFLAGS_CDBLEN_MASK    0x001F
 489 #define IOACCEL1_IOFLAGS_CDBLEN_MAX     16
 490
 491 #define IOACCEL1_CONTROL_NODATAXFER     0x00000000
 492 #define IOACCEL1_CONTROL_DATA_OUT       0x01000000
 493 #define IOACCEL1_CONTROL_DATA_IN        0x02000000
 494 #define IOACCEL1_CONTROL_TASKPRIO_MASK  0x00007800
 495 #define IOACCEL1_CONTROL_TASKPRIO_SHIFT 11
 496 #define IOACCEL1_CONTROL_SIMPLEQUEUE    0x00000000
 497 #define IOACCEL1_CONTROL_HEADOFQUEUE    0x00000100
 498 #define IOACCEL1_CONTROL_ORDEREDQUEUE   0x00000200
 499 #define IOACCEL1_CONTROL_ACA            0x00000400
 500
 501 #define IOACCEL1_HCFLAGS_CISS_FORMAT    0x0013
 502
 503 #define IOACCEL1_BUSADDR_CMDTYPE        0x00000060
 504
 505 struct ioaccel2_sg_element {
 506         __le64 address;
 507         __le32 length;
 508         u8 reserved[3];
 509         u8 chain_indicator;
 510 #define IOACCEL2_CHAIN 0x80
 511 };
 512
 513 /*
 514  * SCSI Response Format structure for IO Accelerator Mode 2
 515  */
 516 struct io_accel2_scsi_response {
 517         u8 IU_type;
 518 #define IOACCEL2_IU_TYPE_SRF                    0x60
 519         u8 reserved1[3];
 520         u8 req_id[4];           /* request identifier */
 521         u8 reserved2[4];
 522         u8 serv_response;               /* service response */
 523 #define IOACCEL2_SERV_RESPONSE_COMPLETE         0x000
 524 #define IOACCEL2_SERV_RESPONSE_FAILURE          0x001
 525 #define IOACCEL2_SERV_RESPONSE_TMF_COMPLETE     0x002
 526 #define IOACCEL2_SERV_RESPONSE_TMF_SUCCESS      0x003
 527 #define IOACCEL2_SERV_RESPONSE_TMF_REJECTED     0x004
 528 #define IOACCEL2_SERV_RESPONSE_TMF_WRONG_LUN    0x005
 529         u8 status;                      /* status */
 530 #define IOACCEL2_STATUS_SR_TASK_COMP_GOOD       0x00
 531 #define IOACCEL2_STATUS_SR_TASK_COMP_CHK_COND   0x02
 532 #define IOACCEL2_STATUS_SR_TASK_COMP_BUSY       0x08
 533 #define IOACCEL2_STATUS_SR_TASK_COMP_RES_CON    0x18
 534 #define IOACCEL2_STATUS_SR_TASK_COMP_SET_FULL   0x28
 535 #define IOACCEL2_STATUS_SR_TASK_COMP_ABORTED    0x40
 536 #define IOACCEL2_STATUS_SR_IOACCEL_DISABLED     0x0E
 537 #define IOACCEL2_STATUS_SR_IO_ERROR             0x01
 538 #define IOACCEL2_STATUS_SR_IO_ABORTED           0x02
 539 #define IOACCEL2_STATUS_SR_NO_PATH_TO_DEVICE    0x03
 540 #define IOACCEL2_STATUS_SR_INVALID_DEVICE       0x04
 541 #define IOACCEL2_STATUS_SR_UNDERRUN             0x51
 542 #define IOACCEL2_STATUS_SR_OVERRUN              0x75
 543         u8 data_present;                /* low 2 bits */
 544 #define IOACCEL2_NO_DATAPRESENT         0x000
 545 #define IOACCEL2_RESPONSE_DATAPRESENT   0x001
 546 #define IOACCEL2_SENSE_DATA_PRESENT     0x002
 547 #define IOACCEL2_RESERVED               0x003
 548         u8 sense_data_len;              /* sense/response data length */
 549         u8 resid_cnt[4];                /* residual count */
 550         u8 sense_data_buff[32];         /* sense/response data buffer */
 551 };
 552
 553 /*
 554  * Structure for I/O accelerator (mode 2 or m2) commands.
 555  * Note that this structure must be 128-byte aligned in size.
 556  */
 557 #define IOACCEL2_COMMANDLIST_ALIGNMENT 128
 558 struct io_accel2_cmd {
 559         u8  IU_type;                    /* IU Type */
 560         u8  direction;                  /* direction, memtype, and encryption */
 561 #define IOACCEL2_DIRECTION_MASK         0x03 /* bits 0,1: direction  */
 562 #define IOACCEL2_DIRECTION_MEMTYPE_MASK 0x04 /* bit 2: memtype source/dest */
 563                                              /*     0b=PCIe, 1b=DDR */
 564 #define IOACCEL2_DIRECTION_ENCRYPT_MASK 0x08 /* bit 3: encryption flag */
 565                                              /*     0=off, 1=on */
 566         u8  reply_queue;                /* Reply Queue ID */
 567         u8  reserved1;                  /* Reserved */
 568         __le32 scsi_nexus;              /* Device Handle */
 569         __le32 Tag;                     /* cciss tag, lower 4 bytes only */
 570         __le32 tweak_lower;             /* Encryption tweak, lower 4 bytes */
 571         u8  cdb[16];                    /* SCSI Command Descriptor Block */
 572         u8  cciss_lun[8];               /* 8 byte SCSI address */
 573         __le32 data_len;                /* Total bytes to transfer */
 574         u8  cmd_priority_task_attr;     /* priority and task attrs */
 575 #define IOACCEL2_PRIORITY_MASK 0x78
 576 #define IOACCEL2_ATTR_MASK 0x07
 577         u8  sg_count;                   /* Number of sg elements */
 578         __le16 dekindex;                /* Data encryption key index */
 579         __le64 err_ptr;                 /* Error Pointer */
 580         __le32 err_len;                 /* Error Length*/
 581         __le32 tweak_upper;             /* Encryption tweak, upper 4 bytes */
 582         struct ioaccel2_sg_element sg[IOACCEL2_MAXSGENTRIES];
 583         struct io_accel2_scsi_response error_data;
 584 } __aligned(IOACCEL2_COMMANDLIST_ALIGNMENT);
 585
 586 /*
 587  * defines for Mode 2 command struct
 588  * FIXME: this can't be all I need mfm
 589  */
 590 #define IOACCEL2_IU_TYPE        0x40
 591 #define IOACCEL2_IU_TMF_TYPE    0x41
 592 #define IOACCEL2_DIR_NO_DATA    0x00
 593 #define IOACCEL2_DIR_DATA_IN    0x01
 594 #define IOACCEL2_DIR_DATA_OUT   0x02
 595 #define IOACCEL2_TMF_ABORT      0x01
 596 /*
 597  * SCSI Task Management Request format for Accelerator Mode 2
 598  */
 599 struct hpsa_tmf_struct {
 600         u8 iu_type;             /* Information Unit Type */
 601         u8 reply_queue;         /* Reply Queue ID */
 602         u8 tmf;                 /* Task Management Function */
 603         u8 reserved1;           /* byte 3 Reserved */
 604         __le32 it_nexus;        /* SCSI I-T Nexus */
 605         u8 lun_id[8];           /* LUN ID for TMF request */
 606         __le64 tag;             /* cciss tag associated w/ request */
 607         __le64 abort_tag;       /* cciss tag of SCSI cmd or TMF to abort */
 608         __le64 error_ptr;               /* Error Pointer */
 609         __le32 error_len;               /* Error Length */
 610 } __aligned(IOACCEL2_COMMANDLIST_ALIGNMENT);
 611
 612 /* Configuration Table Structure */
 613 struct HostWrite {
 614         __le32          TransportRequest;
 615         __le32          command_pool_addr_hi;
 616         __le32          CoalIntDelay;
 617         __le32          CoalIntCount;
 618 };
 619
 620 #define SIMPLE_MODE     0x02
 621 #define PERFORMANT_MODE 0x04
 622 #define MEMQ_MODE       0x08
 623 #define IOACCEL_MODE_1  0x80
 624
 625 #define DRIVER_SUPPORT_UA_ENABLE        0x00000001
 626
 627 struct CfgTable {
 628         u8              Signature[4];
 629         __le32          SpecValence;
 630         __le32          TransportSupport;
 631         __le32          TransportActive;
 632         struct HostWrite HostWrite;
 633         __le32          CmdsOutMax;
 634         __le32          BusTypes;
 635         __le32          TransMethodOffset;
 636         u8              ServerName[16];
 637         __le32          HeartBeat;
 638         __le32          driver_support;
 639 #define                 ENABLE_SCSI_PREFETCH            0x100
 640 #define                 ENABLE_UNIT_ATTN                0x01
 641         __le32          MaxScatterGatherElements;
 642         __le32          MaxLogicalUnits;
 643         __le32          MaxPhysicalDevices;
 644         __le32          MaxPhysicalDrivesPerLogicalUnit;
 645         __le32          MaxPerformantModeCommands;
 646         __le32          MaxBlockFetch;
 647         __le32          PowerConservationSupport;
 648         __le32          PowerConservationEnable;
 649         __le32          TMFSupportFlags;
 650         u8              TMFTagMask[8];
 651         u8              reserved[0x78 - 0x70];
 652         __le32          misc_fw_support;                /* offset 0x78 */
 653 #define                 MISC_FW_DOORBELL_RESET          0x02
 654 #define                 MISC_FW_DOORBELL_RESET2         0x010
 655 #define                 MISC_FW_RAID_OFFLOAD_BASIC      0x020
 656 #define                 MISC_FW_EVENT_NOTIFY            0x080
 657         u8              driver_version[32];
 658         __le32          max_cached_write_size;
 659         u8              driver_scratchpad[16];
 660         __le32          max_error_info_length;
 661         __le32          io_accel_max_embedded_sg_count;
 662         __le32          io_accel_request_size_offset;
 663         __le32          event_notify;
 664 #define         HPSA_EVENT_NOTIFY_ACCEL_IO_PATH_STATE_CHANGE (1 << 30)
 665 #define         HPSA_EVENT_NOTIFY_ACCEL_IO_PATH_CONFIG_CHANGE (1 << 31)
 666         __le32          clear_event_notify;
 667 };
 668
 669 #define NUM_BLOCKFETCH_ENTRIES 8
 670 struct TransTable_struct {
 671         __le32          BlockFetch[NUM_BLOCKFETCH_ENTRIES];
 672         __le32          RepQSize;
 673         __le32          RepQCount;
 674         __le32          RepQCtrAddrLow32;
 675         __le32          RepQCtrAddrHigh32;
 676 #define MAX_REPLY_QUEUES 64
 677         struct vals32  RepQAddr[MAX_REPLY_QUEUES];
 678 };
 679
 680 struct hpsa_pci_info {
 681         unsigned char   bus;
 682         unsigned char   dev_fn;
 683         unsigned short  domain;
 684         u32             board_id;
 685 };
 686
 687 struct bmic_identify_physical_device {
 688         u8    scsi_bus;          /* SCSI Bus number on controller */
 689         u8    scsi_id;           /* SCSI ID on this bus */
 690         __le16 block_size;           /* sector size in bytes */
 691         __le32 total_blocks;         /* number for sectors on drive */
 692         __le32 reserved_blocks;   /* controller reserved (RIS) */
 693         u8    model[40];         /* Physical Drive Model */
 694         u8    serial_number[40]; /* Drive Serial Number */
 695         u8    firmware_revision[8]; /* drive firmware revision */
 696         u8    scsi_inquiry_bits; /* inquiry byte 7 bits */
 697         u8    compaq_drive_stamp; /* 0 means drive not stamped */
 698         u8    last_failure_reason;
 699 #define BMIC_LAST_FAILURE_TOO_SMALL_IN_LOAD_CONFIG              0x01
 700 #define BMIC_LAST_FAILURE_ERROR_ERASING_RIS                     0x02
 701 #define BMIC_LAST_FAILURE_ERROR_SAVING_RIS                      0x03
 702 #define BMIC_LAST_FAILURE_FAIL_DRIVE_COMMAND                    0x04
 703 #define BMIC_LAST_FAILURE_MARK_BAD_FAILED                       0x05
 704 #define BMIC_LAST_FAILURE_MARK_BAD_FAILED_IN_FINISH_REMAP       0x06
 705 #define BMIC_LAST_FAILURE_TIMEOUT                               0x07
 706 #define BMIC_LAST_FAILURE_AUTOSENSE_FAILED                      0x08
 707 #define BMIC_LAST_FAILURE_MEDIUM_ERROR_1                        0x09
 708 #define BMIC_LAST_FAILURE_MEDIUM_ERROR_2                        0x0a
 709 #define BMIC_LAST_FAILURE_NOT_READY_BAD_SENSE                   0x0b
 710 #define BMIC_LAST_FAILURE_NOT_READY                             0x0c
 711 #define BMIC_LAST_FAILURE_HARDWARE_ERROR                        0x0d
 712 #define BMIC_LAST_FAILURE_ABORTED_COMMAND                       0x0e
 713 #define BMIC_LAST_FAILURE_WRITE_PROTECTED                       0x0f
 714 #define BMIC_LAST_FAILURE_SPIN_UP_FAILURE_IN_RECOVER            0x10
 715 #define BMIC_LAST_FAILURE_REBUILD_WRITE_ERROR                   0x11
 716 #define BMIC_LAST_FAILURE_TOO_SMALL_IN_HOT_PLUG                 0x12
 717 #define BMIC_LAST_FAILURE_BUS_RESET_RECOVERY_ABORTED            0x13
 718 #define BMIC_LAST_FAILURE_REMOVED_IN_HOT_PLUG                   0x14
 719 #define BMIC_LAST_FAILURE_INIT_REQUEST_SENSE_FAILED             0x15
 720 #define BMIC_LAST_FAILURE_INIT_START_UNIT_FAILED                0x16
 721 #define BMIC_LAST_FAILURE_INQUIRY_FAILED                        0x17
 722 #define BMIC_LAST_FAILURE_NON_DISK_DEVICE                       0x18
 723 #define BMIC_LAST_FAILURE_READ_CAPACITY_FAILED                  0x19
 724 #define BMIC_LAST_FAILURE_INVALID_BLOCK_SIZE                    0x1a
 725 #define BMIC_LAST_FAILURE_HOT_PLUG_REQUEST_SENSE_FAILED         0x1b
 726 #define BMIC_LAST_FAILURE_HOT_PLUG_START_UNIT_FAILED            0x1c
 727 #define BMIC_LAST_FAILURE_WRITE_ERROR_AFTER_REMAP               0x1d
 728 #define BMIC_LAST_FAILURE_INIT_RESET_RECOVERY_ABORTED           0x1e
 729 #define BMIC_LAST_FAILURE_DEFERRED_WRITE_ERROR                  0x1f
 730 #define BMIC_LAST_FAILURE_MISSING_IN_SAVE_RIS                   0x20
 731 #define BMIC_LAST_FAILURE_WRONG_REPLACE                         0x21
 732 #define BMIC_LAST_FAILURE_GDP_VPD_INQUIRY_FAILED                0x22
 733 #define BMIC_LAST_FAILURE_GDP_MODE_SENSE_FAILED                 0x23
 734 #define BMIC_LAST_FAILURE_DRIVE_NOT_IN_48BIT_MODE               0x24
 735 #define BMIC_LAST_FAILURE_DRIVE_TYPE_MIX_IN_HOT_PLUG            0x25
 736 #define BMIC_LAST_FAILURE_DRIVE_TYPE_MIX_IN_LOAD_CFG            0x26
 737 #define BMIC_LAST_FAILURE_PROTOCOL_ADAPTER_FAILED               0x27
 738 #define BMIC_LAST_FAILURE_FAULTY_ID_BAY_EMPTY                   0x28
 739 #define BMIC_LAST_FAILURE_FAULTY_ID_BAY_OCCUPIED                0x29
 740 #define BMIC_LAST_FAILURE_FAULTY_ID_INVALID_BAY                 0x2a
 741 #define BMIC_LAST_FAILURE_WRITE_RETRIES_FAILED                  0x2b
 742
 743 #define BMIC_LAST_FAILURE_SMART_ERROR_REPORTED                  0x37
 744 #define BMIC_LAST_FAILURE_PHY_RESET_FAILED                      0x38
 745 #define BMIC_LAST_FAILURE_ONLY_ONE_CTLR_CAN_SEE_DRIVE           0x40
 746 #define BMIC_LAST_FAILURE_KC_VOLUME_FAILED                      0x41
 747 #define BMIC_LAST_FAILURE_UNEXPECTED_REPLACEMENT                0x42
 748 #define BMIC_LAST_FAILURE_OFFLINE_ERASE                         0x80
 749 #define BMIC_LAST_FAILURE_OFFLINE_TOO_SMALL                     0x81
 750 #define BMIC_LAST_FAILURE_OFFLINE_DRIVE_TYPE_MIX                0x82
 751 #define BMIC_LAST_FAILURE_OFFLINE_ERASE_COMPLETE                0x83
 752
 753         u8     flags;
 754         u8     more_flags;
 755         u8     scsi_lun;          /* SCSI LUN for phys drive */
 756         u8     yet_more_flags;
 757         u8     even_more_flags;
 758         __le32 spi_speed_rules;/* SPI Speed data:Ultra disable diagnose */
 759         u8     phys_connector[2];         /* connector number on controller */
 760         u8     phys_box_on_bus;  /* phys enclosure this drive resides */
 761         u8     phys_bay_in_box;  /* phys drv bay this drive resides */
 762         __le32 rpm;              /* Drive rotational speed in rpm */
 763         u8     device_type;       /* type of drive */
 764         u8     sata_version;     /* only valid when drive_type is SATA */
 765         __le64 big_total_block_count;
 766         __le64 ris_starting_lba;
 767         __le32 ris_size;
 768         u8     wwid[20];
 769         u8     controller_phy_map[32];
 770         __le16 phy_count;
 771         u8     phy_connected_dev_type[256];
 772         u8     phy_to_drive_bay_num[256];
 773         __le16 phy_to_attached_dev_index[256];
 774         u8     box_index;
 775         u8     reserved;
 776         __le16 extra_physical_drive_flags;
 777 #define BMIC_PHYS_DRIVE_SUPPORTS_GAS_GAUGE(idphydrv) \
 778         (idphydrv->extra_physical_drive_flags & (1 << 10))
 779         u8     negotiated_link_rate[256];
 780         u8     phy_to_phy_map[256];
 781         u8     redundant_path_present_map;
 782         u8     redundant_path_failure_map;
 783         u8     active_path_number;
 784         __le16 alternate_paths_phys_connector[8];
 785         u8     alternate_paths_phys_box_on_port[8];
 786         u8     multi_lun_device_lun_count;
 787         u8     minimum_good_fw_revision[8];
 788         u8     unique_inquiry_bytes[20];
 789         u8     current_temperature_degreesC;
 790         u8     temperature_threshold_degreesC;
 791         u8     max_temperature_degreesC;
 792         u8     logical_blocks_per_phys_block_exp; /* phyblocksize = 512*2^exp */
 793         __le16 current_queue_depth_limit;
 794         u8     switch_name[10];
 795         __le16 switch_port;
 796         u8     alternate_paths_switch_name[40];
 797         u8     alternate_paths_switch_port[8];
 798         __le16 power_on_hours; /* valid only if gas gauge supported */
 799         __le16 percent_endurance_used; /* valid only if gas gauge supported. */
 800 #define BMIC_PHYS_DRIVE_SSD_WEAROUT(idphydrv) \
 801         ((idphydrv->percent_endurance_used & 0x80) || \
 802          (idphydrv->percent_endurance_used > 10000))
 803         u8     drive_authentication;
 804 #define BMIC_PHYS_DRIVE_AUTHENTICATED(idphydrv) \
 805         (idphydrv->drive_authentication == 0x80)
 806         u8     smart_carrier_authentication;
 807 #define BMIC_SMART_CARRIER_AUTHENTICATION_SUPPORTED(idphydrv) \
 808         (idphydrv->smart_carrier_authentication != 0x0)
 809 #define BMIC_SMART_CARRIER_AUTHENTICATED(idphydrv) \
 810         (idphydrv->smart_carrier_authentication == 0x01)
 811         u8     smart_carrier_app_fw_version;
 812         u8     smart_carrier_bootloader_fw_version;
 813         u8     encryption_key_name[64];
 814         __le32 misc_drive_flags;
 815         __le16 dek_index;
 816         u8     padding[112];
 817 };
 818
 819 #pragma pack()
 820 #endif /* HPSA_CMD_H */