2 * This is the Fusion MPT base driver providing common API layer interface
3 * for access to MPT (Message Passing Technology) firmware.
5 * This code is based on drivers/scsi/mpt2sas/mpt2_base.c
6 * Copyright (C) 2007-2010 LSI Corporation
7 * (mailto:DL-MPTFusionLinux@lsi.com)
9 * This program is free software; you can redistribute it and/or
10 * modify it under the terms of the GNU General Public License
11 * as published by the Free Software Foundation; either version 2
12 * of the License, or (at your option) any later version.
14 * This program is distributed in the hope that it will be useful,
15 * but WITHOUT ANY WARRANTY; without even the implied warranty of
16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17 * GNU General Public License for more details.
20 * THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR
21 * CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT
22 * LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT,
23 * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is
24 * solely responsible for determining the appropriateness of using and
25 * distributing the Program and assumes all risks associated with its
26 * exercise of rights under this Agreement, including but not limited to
27 * the risks and costs of program errors, damage to or loss of data,
28 * programs or equipment, and unavailability or interruption of operations.
30 * DISCLAIMER OF LIABILITY
31 * NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY
32 * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
33 * DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND
34 * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
35 * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
36 * USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED
37 * HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES
39 * You should have received a copy of the GNU General Public License
40 * along with this program; if not, write to the Free Software
41 * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301,
45 #include <linux/kernel.h>
46 #include <linux/module.h>
47 #include <linux/errno.h>
48 #include <linux/init.h>
49 #include <linux/slab.h>
50 #include <linux/types.h>
51 #include <linux/pci.h>
52 #include <linux/kdev_t.h>
53 #include <linux/blkdev.h>
54 #include <linux/delay.h>
55 #include <linux/interrupt.h>
56 #include <linux/dma-mapping.h>
57 #include <linux/sort.h>
59 #include <linux/time.h>
60 #include <linux/kthread.h>
61 #include <linux/aer.h>
63 #include "mpt2sas_base.h"
65 static MPT_CALLBACK mpt_callbacks
[MPT_MAX_CALLBACKS
];
67 #define FAULT_POLLING_INTERVAL 1000 /* in milliseconds */
69 #define MAX_HBA_QUEUE_DEPTH 30000
70 #define MAX_CHAIN_DEPTH 100000
71 static int max_queue_depth
= -1;
72 module_param(max_queue_depth
, int, 0);
73 MODULE_PARM_DESC(max_queue_depth
, " max controller queue depth ");
75 static int max_sgl_entries
= -1;
76 module_param(max_sgl_entries
, int, 0);
77 MODULE_PARM_DESC(max_sgl_entries
, " max sg entries ");
79 static int msix_disable
= -1;
80 module_param(msix_disable
, int, 0);
81 MODULE_PARM_DESC(msix_disable
, " disable msix routed interrupts (default=0)");
83 static int missing_delay
[2] = {-1, -1};
84 module_param_array(missing_delay
, int, NULL
, 0);
85 MODULE_PARM_DESC(missing_delay
, " device missing delay , io missing delay");
87 static int mpt2sas_fwfault_debug
;
88 MODULE_PARM_DESC(mpt2sas_fwfault_debug
, " enable detection of firmware fault "
89 "and halt firmware - (default=0)");
91 static int disable_discovery
= -1;
92 module_param(disable_discovery
, int, 0);
93 MODULE_PARM_DESC(disable_discovery
, " disable discovery ");
96 * _scsih_set_fwfault_debug - global setting of ioc->fwfault_debug.
100 _scsih_set_fwfault_debug(const char *val
, struct kernel_param
*kp
)
102 int ret
= param_set_int(val
, kp
);
103 struct MPT2SAS_ADAPTER
*ioc
;
108 printk(KERN_INFO
"setting fwfault_debug(%d)\n", mpt2sas_fwfault_debug
);
109 list_for_each_entry(ioc
, &mpt2sas_ioc_list
, list
)
110 ioc
->fwfault_debug
= mpt2sas_fwfault_debug
;
114 module_param_call(mpt2sas_fwfault_debug
, _scsih_set_fwfault_debug
,
115 param_get_int
, &mpt2sas_fwfault_debug
, 0644);
118 * mpt2sas_remove_dead_ioc_func - kthread context to remove dead ioc
119 * @arg: input argument, used to derive ioc
121 * Return 0 if controller is removed from pci subsystem.
122 * Return -1 for other case.
124 static int mpt2sas_remove_dead_ioc_func(void *arg
)
126 struct MPT2SAS_ADAPTER
*ioc
= (struct MPT2SAS_ADAPTER
*)arg
;
127 struct pci_dev
*pdev
;
135 pci_stop_and_remove_bus_device(pdev
);
141 * _base_fault_reset_work - workq handling ioc fault conditions
142 * @work: input argument, used to derive ioc
148 _base_fault_reset_work(struct work_struct
*work
)
150 struct MPT2SAS_ADAPTER
*ioc
=
151 container_of(work
, struct MPT2SAS_ADAPTER
, fault_reset_work
.work
);
155 struct task_struct
*p
;
157 spin_lock_irqsave(&ioc
->ioc_reset_in_progress_lock
, flags
);
158 if (ioc
->shost_recovery
)
160 spin_unlock_irqrestore(&ioc
->ioc_reset_in_progress_lock
, flags
);
162 doorbell
= mpt2sas_base_get_iocstate(ioc
, 0);
163 if ((doorbell
& MPI2_IOC_STATE_MASK
) == MPI2_IOC_STATE_MASK
) {
164 printk(MPT2SAS_INFO_FMT
"%s : SAS host is non-operational !!!!\n",
165 ioc
->name
, __func__
);
168 * Call _scsih_flush_pending_cmds callback so that we flush all
169 * pending commands back to OS. This call is required to aovid
170 * deadlock at block layer. Dead IOC will fail to do diag reset,
171 * and this call is safe since dead ioc will never return any
172 * command back from HW.
174 ioc
->schedule_dead_ioc_flush_running_cmds(ioc
);
176 * Set remove_host flag early since kernel thread will
177 * take some time to execute.
179 ioc
->remove_host
= 1;
180 /*Remove the Dead Host */
181 p
= kthread_run(mpt2sas_remove_dead_ioc_func
, ioc
,
182 "mpt2sas_dead_ioc_%d", ioc
->id
);
184 printk(MPT2SAS_ERR_FMT
185 "%s: Running mpt2sas_dead_ioc thread failed !!!!\n",
186 ioc
->name
, __func__
);
188 printk(MPT2SAS_ERR_FMT
189 "%s: Running mpt2sas_dead_ioc thread success !!!!\n",
190 ioc
->name
, __func__
);
193 return; /* don't rearm timer */
196 if ((doorbell
& MPI2_IOC_STATE_MASK
) == MPI2_IOC_STATE_FAULT
) {
197 rc
= mpt2sas_base_hard_reset_handler(ioc
, CAN_SLEEP
,
199 printk(MPT2SAS_WARN_FMT
"%s: hard reset: %s\n", ioc
->name
,
200 __func__
, (rc
== 0) ? "success" : "failed");
201 doorbell
= mpt2sas_base_get_iocstate(ioc
, 0);
202 if ((doorbell
& MPI2_IOC_STATE_MASK
) == MPI2_IOC_STATE_FAULT
)
203 mpt2sas_base_fault_info(ioc
, doorbell
&
204 MPI2_DOORBELL_DATA_MASK
);
207 spin_lock_irqsave(&ioc
->ioc_reset_in_progress_lock
, flags
);
209 if (ioc
->fault_reset_work_q
)
210 queue_delayed_work(ioc
->fault_reset_work_q
,
211 &ioc
->fault_reset_work
,
212 msecs_to_jiffies(FAULT_POLLING_INTERVAL
));
213 spin_unlock_irqrestore(&ioc
->ioc_reset_in_progress_lock
, flags
);
217 * mpt2sas_base_start_watchdog - start the fault_reset_work_q
218 * @ioc: per adapter object
224 mpt2sas_base_start_watchdog(struct MPT2SAS_ADAPTER
*ioc
)
228 if (ioc
->fault_reset_work_q
)
231 /* initialize fault polling */
232 INIT_DELAYED_WORK(&ioc
->fault_reset_work
, _base_fault_reset_work
);
233 snprintf(ioc
->fault_reset_work_q_name
,
234 sizeof(ioc
->fault_reset_work_q_name
), "poll_%d_status", ioc
->id
);
235 ioc
->fault_reset_work_q
=
236 create_singlethread_workqueue(ioc
->fault_reset_work_q_name
);
237 if (!ioc
->fault_reset_work_q
) {
238 printk(MPT2SAS_ERR_FMT
"%s: failed (line=%d)\n",
239 ioc
->name
, __func__
, __LINE__
);
242 spin_lock_irqsave(&ioc
->ioc_reset_in_progress_lock
, flags
);
243 if (ioc
->fault_reset_work_q
)
244 queue_delayed_work(ioc
->fault_reset_work_q
,
245 &ioc
->fault_reset_work
,
246 msecs_to_jiffies(FAULT_POLLING_INTERVAL
));
247 spin_unlock_irqrestore(&ioc
->ioc_reset_in_progress_lock
, flags
);
251 * mpt2sas_base_stop_watchdog - stop the fault_reset_work_q
252 * @ioc: per adapter object
258 mpt2sas_base_stop_watchdog(struct MPT2SAS_ADAPTER
*ioc
)
261 struct workqueue_struct
*wq
;
263 spin_lock_irqsave(&ioc
->ioc_reset_in_progress_lock
, flags
);
264 wq
= ioc
->fault_reset_work_q
;
265 ioc
->fault_reset_work_q
= NULL
;
266 spin_unlock_irqrestore(&ioc
->ioc_reset_in_progress_lock
, flags
);
268 if (!cancel_delayed_work(&ioc
->fault_reset_work
))
270 destroy_workqueue(wq
);
275 * mpt2sas_base_fault_info - verbose translation of firmware FAULT code
276 * @ioc: per adapter object
277 * @fault_code: fault code
282 mpt2sas_base_fault_info(struct MPT2SAS_ADAPTER
*ioc
, u16 fault_code
)
284 printk(MPT2SAS_ERR_FMT
"fault_state(0x%04x)!\n",
285 ioc
->name
, fault_code
);
289 * mpt2sas_halt_firmware - halt's mpt controller firmware
290 * @ioc: per adapter object
292 * For debugging timeout related issues. Writing 0xCOFFEE00
293 * to the doorbell register will halt controller firmware. With
294 * the purpose to stop both driver and firmware, the enduser can
295 * obtain a ring buffer from controller UART.
298 mpt2sas_halt_firmware(struct MPT2SAS_ADAPTER
*ioc
)
302 if (!ioc
->fwfault_debug
)
307 doorbell
= readl(&ioc
->chip
->Doorbell
);
308 if ((doorbell
& MPI2_IOC_STATE_MASK
) == MPI2_IOC_STATE_FAULT
)
309 mpt2sas_base_fault_info(ioc
, doorbell
);
311 writel(0xC0FFEE00, &ioc
->chip
->Doorbell
);
312 printk(MPT2SAS_ERR_FMT
"Firmware is halted due to command "
313 "timeout\n", ioc
->name
);
316 panic("panic in %s\n", __func__
);
319 #ifdef CONFIG_SCSI_MPT2SAS_LOGGING
321 * _base_sas_ioc_info - verbose translation of the ioc status
322 * @ioc: per adapter object
323 * @mpi_reply: reply mf payload returned from firmware
324 * @request_hdr: request mf
329 _base_sas_ioc_info(struct MPT2SAS_ADAPTER
*ioc
, MPI2DefaultReply_t
*mpi_reply
,
330 MPI2RequestHeader_t
*request_hdr
)
332 u16 ioc_status
= le16_to_cpu(mpi_reply
->IOCStatus
) &
336 char *func_str
= NULL
;
338 /* SCSI_IO, RAID_PASS are handled from _scsih_scsi_ioc_info */
339 if (request_hdr
->Function
== MPI2_FUNCTION_SCSI_IO_REQUEST
||
340 request_hdr
->Function
== MPI2_FUNCTION_RAID_SCSI_IO_PASSTHROUGH
||
341 request_hdr
->Function
== MPI2_FUNCTION_EVENT_NOTIFICATION
)
344 if (ioc_status
== MPI2_IOCSTATUS_CONFIG_INVALID_PAGE
)
347 switch (ioc_status
) {
349 /****************************************************************************
350 * Common IOCStatus values for all replies
351 ****************************************************************************/
353 case MPI2_IOCSTATUS_INVALID_FUNCTION
:
354 desc
= "invalid function";
356 case MPI2_IOCSTATUS_BUSY
:
359 case MPI2_IOCSTATUS_INVALID_SGL
:
360 desc
= "invalid sgl";
362 case MPI2_IOCSTATUS_INTERNAL_ERROR
:
363 desc
= "internal error";
365 case MPI2_IOCSTATUS_INVALID_VPID
:
366 desc
= "invalid vpid";
368 case MPI2_IOCSTATUS_INSUFFICIENT_RESOURCES
:
369 desc
= "insufficient resources";
371 case MPI2_IOCSTATUS_INVALID_FIELD
:
372 desc
= "invalid field";
374 case MPI2_IOCSTATUS_INVALID_STATE
:
375 desc
= "invalid state";
377 case MPI2_IOCSTATUS_OP_STATE_NOT_SUPPORTED
:
378 desc
= "op state not supported";
381 /****************************************************************************
382 * Config IOCStatus values
383 ****************************************************************************/
385 case MPI2_IOCSTATUS_CONFIG_INVALID_ACTION
:
386 desc
= "config invalid action";
388 case MPI2_IOCSTATUS_CONFIG_INVALID_TYPE
:
389 desc
= "config invalid type";
391 case MPI2_IOCSTATUS_CONFIG_INVALID_PAGE
:
392 desc
= "config invalid page";
394 case MPI2_IOCSTATUS_CONFIG_INVALID_DATA
:
395 desc
= "config invalid data";
397 case MPI2_IOCSTATUS_CONFIG_NO_DEFAULTS
:
398 desc
= "config no defaults";
400 case MPI2_IOCSTATUS_CONFIG_CANT_COMMIT
:
401 desc
= "config cant commit";
404 /****************************************************************************
406 ****************************************************************************/
408 case MPI2_IOCSTATUS_SCSI_RECOVERED_ERROR
:
409 case MPI2_IOCSTATUS_SCSI_INVALID_DEVHANDLE
:
410 case MPI2_IOCSTATUS_SCSI_DEVICE_NOT_THERE
:
411 case MPI2_IOCSTATUS_SCSI_DATA_OVERRUN
:
412 case MPI2_IOCSTATUS_SCSI_DATA_UNDERRUN
:
413 case MPI2_IOCSTATUS_SCSI_IO_DATA_ERROR
:
414 case MPI2_IOCSTATUS_SCSI_PROTOCOL_ERROR
:
415 case MPI2_IOCSTATUS_SCSI_TASK_TERMINATED
:
416 case MPI2_IOCSTATUS_SCSI_RESIDUAL_MISMATCH
:
417 case MPI2_IOCSTATUS_SCSI_TASK_MGMT_FAILED
:
418 case MPI2_IOCSTATUS_SCSI_IOC_TERMINATED
:
419 case MPI2_IOCSTATUS_SCSI_EXT_TERMINATED
:
422 /****************************************************************************
423 * For use by SCSI Initiator and SCSI Target end-to-end data protection
424 ****************************************************************************/
426 case MPI2_IOCSTATUS_EEDP_GUARD_ERROR
:
427 desc
= "eedp guard error";
429 case MPI2_IOCSTATUS_EEDP_REF_TAG_ERROR
:
430 desc
= "eedp ref tag error";
432 case MPI2_IOCSTATUS_EEDP_APP_TAG_ERROR
:
433 desc
= "eedp app tag error";
436 /****************************************************************************
438 ****************************************************************************/
440 case MPI2_IOCSTATUS_TARGET_INVALID_IO_INDEX
:
441 desc
= "target invalid io index";
443 case MPI2_IOCSTATUS_TARGET_ABORTED
:
444 desc
= "target aborted";
446 case MPI2_IOCSTATUS_TARGET_NO_CONN_RETRYABLE
:
447 desc
= "target no conn retryable";
449 case MPI2_IOCSTATUS_TARGET_NO_CONNECTION
:
450 desc
= "target no connection";
452 case MPI2_IOCSTATUS_TARGET_XFER_COUNT_MISMATCH
:
453 desc
= "target xfer count mismatch";
455 case MPI2_IOCSTATUS_TARGET_DATA_OFFSET_ERROR
:
456 desc
= "target data offset error";
458 case MPI2_IOCSTATUS_TARGET_TOO_MUCH_WRITE_DATA
:
459 desc
= "target too much write data";
461 case MPI2_IOCSTATUS_TARGET_IU_TOO_SHORT
:
462 desc
= "target iu too short";
464 case MPI2_IOCSTATUS_TARGET_ACK_NAK_TIMEOUT
:
465 desc
= "target ack nak timeout";
467 case MPI2_IOCSTATUS_TARGET_NAK_RECEIVED
:
468 desc
= "target nak received";
471 /****************************************************************************
472 * Serial Attached SCSI values
473 ****************************************************************************/
475 case MPI2_IOCSTATUS_SAS_SMP_REQUEST_FAILED
:
476 desc
= "smp request failed";
478 case MPI2_IOCSTATUS_SAS_SMP_DATA_OVERRUN
:
479 desc
= "smp data overrun";
482 /****************************************************************************
483 * Diagnostic Buffer Post / Diagnostic Release values
484 ****************************************************************************/
486 case MPI2_IOCSTATUS_DIAGNOSTIC_RELEASED
:
487 desc
= "diagnostic released";
496 switch (request_hdr
->Function
) {
497 case MPI2_FUNCTION_CONFIG
:
498 frame_sz
= sizeof(Mpi2ConfigRequest_t
) + ioc
->sge_size
;
499 func_str
= "config_page";
501 case MPI2_FUNCTION_SCSI_TASK_MGMT
:
502 frame_sz
= sizeof(Mpi2SCSITaskManagementRequest_t
);
503 func_str
= "task_mgmt";
505 case MPI2_FUNCTION_SAS_IO_UNIT_CONTROL
:
506 frame_sz
= sizeof(Mpi2SasIoUnitControlRequest_t
);
507 func_str
= "sas_iounit_ctl";
509 case MPI2_FUNCTION_SCSI_ENCLOSURE_PROCESSOR
:
510 frame_sz
= sizeof(Mpi2SepRequest_t
);
511 func_str
= "enclosure";
513 case MPI2_FUNCTION_IOC_INIT
:
514 frame_sz
= sizeof(Mpi2IOCInitRequest_t
);
515 func_str
= "ioc_init";
517 case MPI2_FUNCTION_PORT_ENABLE
:
518 frame_sz
= sizeof(Mpi2PortEnableRequest_t
);
519 func_str
= "port_enable";
521 case MPI2_FUNCTION_SMP_PASSTHROUGH
:
522 frame_sz
= sizeof(Mpi2SmpPassthroughRequest_t
) + ioc
->sge_size
;
523 func_str
= "smp_passthru";
527 func_str
= "unknown";
531 printk(MPT2SAS_WARN_FMT
"ioc_status: %s(0x%04x), request(0x%p),"
532 " (%s)\n", ioc
->name
, desc
, ioc_status
, request_hdr
, func_str
);
534 _debug_dump_mf(request_hdr
, frame_sz
/4);
538 * _base_display_event_data - verbose translation of firmware asyn events
539 * @ioc: per adapter object
540 * @mpi_reply: reply mf payload returned from firmware
545 _base_display_event_data(struct MPT2SAS_ADAPTER
*ioc
,
546 Mpi2EventNotificationReply_t
*mpi_reply
)
551 if (!(ioc
->logging_level
& MPT_DEBUG_EVENTS
))
554 event
= le16_to_cpu(mpi_reply
->Event
);
557 case MPI2_EVENT_LOG_DATA
:
560 case MPI2_EVENT_STATE_CHANGE
:
561 desc
= "Status Change";
563 case MPI2_EVENT_HARD_RESET_RECEIVED
:
564 desc
= "Hard Reset Received";
566 case MPI2_EVENT_EVENT_CHANGE
:
567 desc
= "Event Change";
569 case MPI2_EVENT_SAS_DEVICE_STATUS_CHANGE
:
570 desc
= "Device Status Change";
572 case MPI2_EVENT_IR_OPERATION_STATUS
:
573 if (!ioc
->hide_ir_msg
)
574 desc
= "IR Operation Status";
576 case MPI2_EVENT_SAS_DISCOVERY
:
578 Mpi2EventDataSasDiscovery_t
*event_data
=
579 (Mpi2EventDataSasDiscovery_t
*)mpi_reply
->EventData
;
580 printk(MPT2SAS_INFO_FMT
"Discovery: (%s)", ioc
->name
,
581 (event_data
->ReasonCode
== MPI2_EVENT_SAS_DISC_RC_STARTED
) ?
583 if (event_data
->DiscoveryStatus
)
584 printk("discovery_status(0x%08x)",
585 le32_to_cpu(event_data
->DiscoveryStatus
));
589 case MPI2_EVENT_SAS_BROADCAST_PRIMITIVE
:
590 desc
= "SAS Broadcast Primitive";
592 case MPI2_EVENT_SAS_INIT_DEVICE_STATUS_CHANGE
:
593 desc
= "SAS Init Device Status Change";
595 case MPI2_EVENT_SAS_INIT_TABLE_OVERFLOW
:
596 desc
= "SAS Init Table Overflow";
598 case MPI2_EVENT_SAS_TOPOLOGY_CHANGE_LIST
:
599 desc
= "SAS Topology Change List";
601 case MPI2_EVENT_SAS_ENCL_DEVICE_STATUS_CHANGE
:
602 desc
= "SAS Enclosure Device Status Change";
604 case MPI2_EVENT_IR_VOLUME
:
605 if (!ioc
->hide_ir_msg
)
608 case MPI2_EVENT_IR_PHYSICAL_DISK
:
609 if (!ioc
->hide_ir_msg
)
610 desc
= "IR Physical Disk";
612 case MPI2_EVENT_IR_CONFIGURATION_CHANGE_LIST
:
613 if (!ioc
->hide_ir_msg
)
614 desc
= "IR Configuration Change List";
616 case MPI2_EVENT_LOG_ENTRY_ADDED
:
617 if (!ioc
->hide_ir_msg
)
618 desc
= "Log Entry Added";
625 printk(MPT2SAS_INFO_FMT
"%s\n", ioc
->name
, desc
);
630 * _base_sas_log_info - verbose translation of firmware log info
631 * @ioc: per adapter object
632 * @log_info: log info
637 _base_sas_log_info(struct MPT2SAS_ADAPTER
*ioc
, u32 log_info
)
648 union loginfo_type sas_loginfo
;
649 char *originator_str
= NULL
;
651 sas_loginfo
.loginfo
= log_info
;
652 if (sas_loginfo
.dw
.bus_type
!= 3 /*SAS*/)
655 /* each nexus loss loginfo */
656 if (log_info
== 0x31170000)
659 /* eat the loginfos associated with task aborts */
660 if (ioc
->ignore_loginfos
&& (log_info
== 0x30050000 || log_info
==
661 0x31140000 || log_info
== 0x31130000))
664 switch (sas_loginfo
.dw
.originator
) {
666 originator_str
= "IOP";
669 originator_str
= "PL";
672 if (!ioc
->hide_ir_msg
)
673 originator_str
= "IR";
675 originator_str
= "WarpDrive";
679 printk(MPT2SAS_WARN_FMT
"log_info(0x%08x): originator(%s), "
680 "code(0x%02x), sub_code(0x%04x)\n", ioc
->name
, log_info
,
681 originator_str
, sas_loginfo
.dw
.code
,
682 sas_loginfo
.dw
.subcode
);
686 * _base_display_reply_info -
687 * @ioc: per adapter object
688 * @smid: system request message index
689 * @msix_index: MSIX table index supplied by the OS
690 * @reply: reply message frame(lower 32bit addr)
695 _base_display_reply_info(struct MPT2SAS_ADAPTER
*ioc
, u16 smid
, u8 msix_index
,
698 MPI2DefaultReply_t
*mpi_reply
;
701 mpi_reply
= mpt2sas_base_get_reply_virt_addr(ioc
, reply
);
702 if (unlikely(!mpi_reply
)) {
703 printk(MPT2SAS_ERR_FMT
"mpi_reply not valid at %s:%d/%s()!\n",
704 ioc
->name
, __FILE__
, __LINE__
, __func__
);
707 ioc_status
= le16_to_cpu(mpi_reply
->IOCStatus
);
708 #ifdef CONFIG_SCSI_MPT2SAS_LOGGING
709 if ((ioc_status
& MPI2_IOCSTATUS_MASK
) &&
710 (ioc
->logging_level
& MPT_DEBUG_REPLY
)) {
711 _base_sas_ioc_info(ioc
, mpi_reply
,
712 mpt2sas_base_get_msg_frame(ioc
, smid
));
715 if (ioc_status
& MPI2_IOCSTATUS_FLAG_LOG_INFO_AVAILABLE
)
716 _base_sas_log_info(ioc
, le32_to_cpu(mpi_reply
->IOCLogInfo
));
720 * mpt2sas_base_done - base internal command completion routine
721 * @ioc: per adapter object
722 * @smid: system request message index
723 * @msix_index: MSIX table index supplied by the OS
724 * @reply: reply message frame(lower 32bit addr)
726 * Return 1 meaning mf should be freed from _base_interrupt
727 * 0 means the mf is freed from this function.
730 mpt2sas_base_done(struct MPT2SAS_ADAPTER
*ioc
, u16 smid
, u8 msix_index
,
733 MPI2DefaultReply_t
*mpi_reply
;
735 mpi_reply
= mpt2sas_base_get_reply_virt_addr(ioc
, reply
);
736 if (mpi_reply
&& mpi_reply
->Function
== MPI2_FUNCTION_EVENT_ACK
)
739 if (ioc
->base_cmds
.status
== MPT2_CMD_NOT_USED
)
742 ioc
->base_cmds
.status
|= MPT2_CMD_COMPLETE
;
744 ioc
->base_cmds
.status
|= MPT2_CMD_REPLY_VALID
;
745 memcpy(ioc
->base_cmds
.reply
, mpi_reply
, mpi_reply
->MsgLength
*4);
747 ioc
->base_cmds
.status
&= ~MPT2_CMD_PENDING
;
749 complete(&ioc
->base_cmds
.done
);
754 * _base_async_event - main callback handler for firmware asyn events
755 * @ioc: per adapter object
756 * @msix_index: MSIX table index supplied by the OS
757 * @reply: reply message frame(lower 32bit addr)
759 * Return 1 meaning mf should be freed from _base_interrupt
760 * 0 means the mf is freed from this function.
763 _base_async_event(struct MPT2SAS_ADAPTER
*ioc
, u8 msix_index
, u32 reply
)
765 Mpi2EventNotificationReply_t
*mpi_reply
;
766 Mpi2EventAckRequest_t
*ack_request
;
769 mpi_reply
= mpt2sas_base_get_reply_virt_addr(ioc
, reply
);
772 if (mpi_reply
->Function
!= MPI2_FUNCTION_EVENT_NOTIFICATION
)
774 #ifdef CONFIG_SCSI_MPT2SAS_LOGGING
775 _base_display_event_data(ioc
, mpi_reply
);
777 if (!(mpi_reply
->AckRequired
& MPI2_EVENT_NOTIFICATION_ACK_REQUIRED
))
779 smid
= mpt2sas_base_get_smid(ioc
, ioc
->base_cb_idx
);
781 printk(MPT2SAS_ERR_FMT
"%s: failed obtaining a smid\n",
782 ioc
->name
, __func__
);
786 ack_request
= mpt2sas_base_get_msg_frame(ioc
, smid
);
787 memset(ack_request
, 0, sizeof(Mpi2EventAckRequest_t
));
788 ack_request
->Function
= MPI2_FUNCTION_EVENT_ACK
;
789 ack_request
->Event
= mpi_reply
->Event
;
790 ack_request
->EventContext
= mpi_reply
->EventContext
;
791 ack_request
->VF_ID
= 0; /* TODO */
792 ack_request
->VP_ID
= 0;
793 mpt2sas_base_put_smid_default(ioc
, smid
);
797 /* scsih callback handler */
798 mpt2sas_scsih_event_callback(ioc
, msix_index
, reply
);
800 /* ctl callback handler */
801 mpt2sas_ctl_event_callback(ioc
, msix_index
, reply
);
807 * _base_get_cb_idx - obtain the callback index
808 * @ioc: per adapter object
809 * @smid: system request message index
811 * Return callback index.
814 _base_get_cb_idx(struct MPT2SAS_ADAPTER
*ioc
, u16 smid
)
819 if (smid
< ioc
->hi_priority_smid
) {
821 cb_idx
= ioc
->scsi_lookup
[i
].cb_idx
;
822 } else if (smid
< ioc
->internal_smid
) {
823 i
= smid
- ioc
->hi_priority_smid
;
824 cb_idx
= ioc
->hpr_lookup
[i
].cb_idx
;
825 } else if (smid
<= ioc
->hba_queue_depth
) {
826 i
= smid
- ioc
->internal_smid
;
827 cb_idx
= ioc
->internal_lookup
[i
].cb_idx
;
834 * _base_mask_interrupts - disable interrupts
835 * @ioc: per adapter object
837 * Disabling ResetIRQ, Reply and Doorbell Interrupts
842 _base_mask_interrupts(struct MPT2SAS_ADAPTER
*ioc
)
846 ioc
->mask_interrupts
= 1;
847 him_register
= readl(&ioc
->chip
->HostInterruptMask
);
848 him_register
|= MPI2_HIM_DIM
+ MPI2_HIM_RIM
+ MPI2_HIM_RESET_IRQ_MASK
;
849 writel(him_register
, &ioc
->chip
->HostInterruptMask
);
850 readl(&ioc
->chip
->HostInterruptMask
);
854 * _base_unmask_interrupts - enable interrupts
855 * @ioc: per adapter object
857 * Enabling only Reply Interrupts
862 _base_unmask_interrupts(struct MPT2SAS_ADAPTER
*ioc
)
866 him_register
= readl(&ioc
->chip
->HostInterruptMask
);
867 him_register
&= ~MPI2_HIM_RIM
;
868 writel(him_register
, &ioc
->chip
->HostInterruptMask
);
869 ioc
->mask_interrupts
= 0;
872 union reply_descriptor
{
881 * _base_interrupt - MPT adapter (IOC) specific interrupt handler.
882 * @irq: irq number (not used)
883 * @bus_id: bus identifier cookie == pointer to MPT_ADAPTER structure
884 * @r: pt_regs pointer (not used)
886 * Return IRQ_HANDLE if processed, else IRQ_NONE.
889 _base_interrupt(int irq
, void *bus_id
)
891 struct adapter_reply_queue
*reply_q
= bus_id
;
892 union reply_descriptor rd
;
894 u8 request_desript_type
;
898 u8 msix_index
= reply_q
->msix_index
;
899 struct MPT2SAS_ADAPTER
*ioc
= reply_q
->ioc
;
900 Mpi2ReplyDescriptorsUnion_t
*rpf
;
903 if (ioc
->mask_interrupts
)
906 if (!atomic_add_unless(&reply_q
->busy
, 1, 1))
909 rpf
= &reply_q
->reply_post_free
[reply_q
->reply_post_host_index
];
910 request_desript_type
= rpf
->Default
.ReplyFlags
911 & MPI2_RPY_DESCRIPT_FLAGS_TYPE_MASK
;
912 if (request_desript_type
== MPI2_RPY_DESCRIPT_FLAGS_UNUSED
) {
913 atomic_dec(&reply_q
->busy
);
920 rd
.word
= le64_to_cpu(rpf
->Words
);
921 if (rd
.u
.low
== UINT_MAX
|| rd
.u
.high
== UINT_MAX
)
924 smid
= le16_to_cpu(rpf
->Default
.DescriptorTypeDependent1
);
925 if (request_desript_type
==
926 MPI2_RPY_DESCRIPT_FLAGS_ADDRESS_REPLY
) {
928 (rpf
->AddressReply
.ReplyFrameAddress
);
929 if (reply
> ioc
->reply_dma_max_address
||
930 reply
< ioc
->reply_dma_min_address
)
932 } else if (request_desript_type
==
933 MPI2_RPY_DESCRIPT_FLAGS_TARGET_COMMAND_BUFFER
)
935 else if (request_desript_type
==
936 MPI2_RPY_DESCRIPT_FLAGS_TARGETASSIST_SUCCESS
)
939 cb_idx
= _base_get_cb_idx(ioc
, smid
);
940 if ((likely(cb_idx
< MPT_MAX_CALLBACKS
))
941 && (likely(mpt_callbacks
[cb_idx
] != NULL
))) {
942 rc
= mpt_callbacks
[cb_idx
](ioc
, smid
,
945 _base_display_reply_info(ioc
, smid
,
948 mpt2sas_base_free_smid(ioc
, smid
);
952 _base_async_event(ioc
, msix_index
, reply
);
954 /* reply free queue handling */
956 ioc
->reply_free_host_index
=
957 (ioc
->reply_free_host_index
==
958 (ioc
->reply_free_queue_depth
- 1)) ?
959 0 : ioc
->reply_free_host_index
+ 1;
960 ioc
->reply_free
[ioc
->reply_free_host_index
] =
963 writel(ioc
->reply_free_host_index
,
964 &ioc
->chip
->ReplyFreeHostIndex
);
969 rpf
->Words
= cpu_to_le64(ULLONG_MAX
);
970 reply_q
->reply_post_host_index
=
971 (reply_q
->reply_post_host_index
==
972 (ioc
->reply_post_queue_depth
- 1)) ? 0 :
973 reply_q
->reply_post_host_index
+ 1;
974 request_desript_type
=
975 reply_q
->reply_post_free
[reply_q
->reply_post_host_index
].
976 Default
.ReplyFlags
& MPI2_RPY_DESCRIPT_FLAGS_TYPE_MASK
;
978 if (request_desript_type
== MPI2_RPY_DESCRIPT_FLAGS_UNUSED
)
980 if (!reply_q
->reply_post_host_index
)
981 rpf
= reply_q
->reply_post_free
;
988 if (!completed_cmds
) {
989 atomic_dec(&reply_q
->busy
);
993 if (ioc
->is_warpdrive
) {
994 writel(reply_q
->reply_post_host_index
,
995 ioc
->reply_post_host_index
[msix_index
]);
996 atomic_dec(&reply_q
->busy
);
999 writel(reply_q
->reply_post_host_index
| (msix_index
<<
1000 MPI2_RPHI_MSIX_INDEX_SHIFT
), &ioc
->chip
->ReplyPostHostIndex
);
1001 atomic_dec(&reply_q
->busy
);
1006 * _base_is_controller_msix_enabled - is controller support muli-reply queues
1007 * @ioc: per adapter object
1011 _base_is_controller_msix_enabled(struct MPT2SAS_ADAPTER
*ioc
)
1013 return (ioc
->facts
.IOCCapabilities
&
1014 MPI2_IOCFACTS_CAPABILITY_MSI_X_INDEX
) && ioc
->msix_enable
;
1018 * mpt2sas_base_flush_reply_queues - flushing the MSIX reply queues
1019 * @ioc: per adapter object
1020 * Context: ISR conext
1022 * Called when a Task Management request has completed. We want
1023 * to flush the other reply queues so all the outstanding IO has been
1024 * completed back to OS before we process the TM completetion.
1029 mpt2sas_base_flush_reply_queues(struct MPT2SAS_ADAPTER
*ioc
)
1031 struct adapter_reply_queue
*reply_q
;
1033 /* If MSIX capability is turned off
1034 * then multi-queues are not enabled
1036 if (!_base_is_controller_msix_enabled(ioc
))
1039 list_for_each_entry(reply_q
, &ioc
->reply_queue_list
, list
) {
1040 if (ioc
->shost_recovery
)
1042 /* TMs are on msix_index == 0 */
1043 if (reply_q
->msix_index
== 0)
1045 _base_interrupt(reply_q
->vector
, (void *)reply_q
);
1050 * mpt2sas_base_release_callback_handler - clear interrupt callback handler
1051 * @cb_idx: callback index
1056 mpt2sas_base_release_callback_handler(u8 cb_idx
)
1058 mpt_callbacks
[cb_idx
] = NULL
;
1062 * mpt2sas_base_register_callback_handler - obtain index for the interrupt callback handler
1063 * @cb_func: callback function
1068 mpt2sas_base_register_callback_handler(MPT_CALLBACK cb_func
)
1072 for (cb_idx
= MPT_MAX_CALLBACKS
-1; cb_idx
; cb_idx
--)
1073 if (mpt_callbacks
[cb_idx
] == NULL
)
1076 mpt_callbacks
[cb_idx
] = cb_func
;
1081 * mpt2sas_base_initialize_callback_handler - initialize the interrupt callback handler
1086 mpt2sas_base_initialize_callback_handler(void)
1090 for (cb_idx
= 0; cb_idx
< MPT_MAX_CALLBACKS
; cb_idx
++)
1091 mpt2sas_base_release_callback_handler(cb_idx
);
1095 * mpt2sas_base_build_zero_len_sge - build zero length sg entry
1096 * @ioc: per adapter object
1097 * @paddr: virtual address for SGE
1099 * Create a zero length scatter gather entry to insure the IOCs hardware has
1100 * something to use if the target device goes brain dead and tries
1101 * to send data even when none is asked for.
1106 mpt2sas_base_build_zero_len_sge(struct MPT2SAS_ADAPTER
*ioc
, void *paddr
)
1108 u32 flags_length
= (u32
)((MPI2_SGE_FLAGS_LAST_ELEMENT
|
1109 MPI2_SGE_FLAGS_END_OF_BUFFER
| MPI2_SGE_FLAGS_END_OF_LIST
|
1110 MPI2_SGE_FLAGS_SIMPLE_ELEMENT
) <<
1111 MPI2_SGE_FLAGS_SHIFT
);
1112 ioc
->base_add_sg_single(paddr
, flags_length
, -1);
1116 * _base_add_sg_single_32 - Place a simple 32 bit SGE at address pAddr.
1117 * @paddr: virtual address for SGE
1118 * @flags_length: SGE flags and data transfer length
1119 * @dma_addr: Physical address
1124 _base_add_sg_single_32(void *paddr
, u32 flags_length
, dma_addr_t dma_addr
)
1126 Mpi2SGESimple32_t
*sgel
= paddr
;
1128 flags_length
|= (MPI2_SGE_FLAGS_32_BIT_ADDRESSING
|
1129 MPI2_SGE_FLAGS_SYSTEM_ADDRESS
) << MPI2_SGE_FLAGS_SHIFT
;
1130 sgel
->FlagsLength
= cpu_to_le32(flags_length
);
1131 sgel
->Address
= cpu_to_le32(dma_addr
);
1136 * _base_add_sg_single_64 - Place a simple 64 bit SGE at address pAddr.
1137 * @paddr: virtual address for SGE
1138 * @flags_length: SGE flags and data transfer length
1139 * @dma_addr: Physical address
1144 _base_add_sg_single_64(void *paddr
, u32 flags_length
, dma_addr_t dma_addr
)
1146 Mpi2SGESimple64_t
*sgel
= paddr
;
1148 flags_length
|= (MPI2_SGE_FLAGS_64_BIT_ADDRESSING
|
1149 MPI2_SGE_FLAGS_SYSTEM_ADDRESS
) << MPI2_SGE_FLAGS_SHIFT
;
1150 sgel
->FlagsLength
= cpu_to_le32(flags_length
);
1151 sgel
->Address
= cpu_to_le64(dma_addr
);
1154 #define convert_to_kb(x) ((x) << (PAGE_SHIFT - 10))
1157 * _base_config_dma_addressing - set dma addressing
1158 * @ioc: per adapter object
1159 * @pdev: PCI device struct
1161 * Returns 0 for success, non-zero for failure.
1164 _base_config_dma_addressing(struct MPT2SAS_ADAPTER
*ioc
, struct pci_dev
*pdev
)
1169 if (sizeof(dma_addr_t
) > 4) {
1170 const uint64_t required_mask
=
1171 dma_get_required_mask(&pdev
->dev
);
1172 if ((required_mask
> DMA_BIT_MASK(32)) && !pci_set_dma_mask(pdev
,
1173 DMA_BIT_MASK(64)) && !pci_set_consistent_dma_mask(pdev
,
1174 DMA_BIT_MASK(64))) {
1175 ioc
->base_add_sg_single
= &_base_add_sg_single_64
;
1176 ioc
->sge_size
= sizeof(Mpi2SGESimple64_t
);
1182 if (!pci_set_dma_mask(pdev
, DMA_BIT_MASK(32))
1183 && !pci_set_consistent_dma_mask(pdev
, DMA_BIT_MASK(32))) {
1184 ioc
->base_add_sg_single
= &_base_add_sg_single_32
;
1185 ioc
->sge_size
= sizeof(Mpi2SGESimple32_t
);
1192 printk(MPT2SAS_INFO_FMT
"%s BIT PCI BUS DMA ADDRESSING SUPPORTED, "
1193 "total mem (%ld kB)\n", ioc
->name
, desc
, convert_to_kb(s
.totalram
));
1199 * _base_check_enable_msix - checks MSIX capabable.
1200 * @ioc: per adapter object
1202 * Check to see if card is capable of MSIX, and set number
1203 * of available msix vectors
1206 _base_check_enable_msix(struct MPT2SAS_ADAPTER
*ioc
)
1209 u16 message_control
;
1212 base
= pci_find_capability(ioc
->pdev
, PCI_CAP_ID_MSIX
);
1214 dfailprintk(ioc
, printk(MPT2SAS_INFO_FMT
"msix not "
1215 "supported\n", ioc
->name
));
1219 /* get msix vector count */
1220 /* NUMA_IO not supported for older controllers */
1221 if (ioc
->pdev
->device
== MPI2_MFGPAGE_DEVID_SAS2004
||
1222 ioc
->pdev
->device
== MPI2_MFGPAGE_DEVID_SAS2008
||
1223 ioc
->pdev
->device
== MPI2_MFGPAGE_DEVID_SAS2108_1
||
1224 ioc
->pdev
->device
== MPI2_MFGPAGE_DEVID_SAS2108_2
||
1225 ioc
->pdev
->device
== MPI2_MFGPAGE_DEVID_SAS2108_3
||
1226 ioc
->pdev
->device
== MPI2_MFGPAGE_DEVID_SAS2116_1
||
1227 ioc
->pdev
->device
== MPI2_MFGPAGE_DEVID_SAS2116_2
)
1228 ioc
->msix_vector_count
= 1;
1230 pci_read_config_word(ioc
->pdev
, base
+ 2, &message_control
);
1231 ioc
->msix_vector_count
= (message_control
& 0x3FF) + 1;
1233 dinitprintk(ioc
, printk(MPT2SAS_INFO_FMT
"msix is supported, "
1234 "vector_count(%d)\n", ioc
->name
, ioc
->msix_vector_count
));
1240 * _base_free_irq - free irq
1241 * @ioc: per adapter object
1243 * Freeing respective reply_queue from the list.
1246 _base_free_irq(struct MPT2SAS_ADAPTER
*ioc
)
1248 struct adapter_reply_queue
*reply_q
, *next
;
1250 if (list_empty(&ioc
->reply_queue_list
))
1253 list_for_each_entry_safe(reply_q
, next
, &ioc
->reply_queue_list
, list
) {
1254 list_del(&reply_q
->list
);
1255 synchronize_irq(reply_q
->vector
);
1256 free_irq(reply_q
->vector
, reply_q
);
1262 * _base_request_irq - request irq
1263 * @ioc: per adapter object
1264 * @index: msix index into vector table
1265 * @vector: irq vector
1267 * Inserting respective reply_queue into the list.
1270 _base_request_irq(struct MPT2SAS_ADAPTER
*ioc
, u8 index
, u32 vector
)
1272 struct adapter_reply_queue
*reply_q
;
1275 reply_q
= kzalloc(sizeof(struct adapter_reply_queue
), GFP_KERNEL
);
1277 printk(MPT2SAS_ERR_FMT
"unable to allocate memory %d!\n",
1278 ioc
->name
, (int)sizeof(struct adapter_reply_queue
));
1282 reply_q
->msix_index
= index
;
1283 reply_q
->vector
= vector
;
1284 atomic_set(&reply_q
->busy
, 0);
1285 if (ioc
->msix_enable
)
1286 snprintf(reply_q
->name
, MPT_NAME_LENGTH
, "%s%d-msix%d",
1287 MPT2SAS_DRIVER_NAME
, ioc
->id
, index
);
1289 snprintf(reply_q
->name
, MPT_NAME_LENGTH
, "%s%d",
1290 MPT2SAS_DRIVER_NAME
, ioc
->id
);
1291 r
= request_irq(vector
, _base_interrupt
, IRQF_SHARED
, reply_q
->name
,
1294 printk(MPT2SAS_ERR_FMT
"unable to allocate interrupt %d!\n",
1295 reply_q
->name
, vector
);
1300 INIT_LIST_HEAD(&reply_q
->list
);
1301 list_add_tail(&reply_q
->list
, &ioc
->reply_queue_list
);
1306 * _base_assign_reply_queues - assigning msix index for each cpu
1307 * @ioc: per adapter object
1309 * The enduser would need to set the affinity via /proc/irq/#/smp_affinity
1311 * It would nice if we could call irq_set_affinity, however it is not
1312 * an exported symbol
1315 _base_assign_reply_queues(struct MPT2SAS_ADAPTER
*ioc
)
1317 struct adapter_reply_queue
*reply_q
;
1319 int cpu_grouping
, loop
, grouping
, grouping_mod
;
1321 if (!_base_is_controller_msix_enabled(ioc
))
1324 memset(ioc
->cpu_msix_table
, 0, ioc
->cpu_msix_table_sz
);
1325 /* when there are more cpus than available msix vectors,
1326 * then group cpus togeather on same irq
1328 if (ioc
->cpu_count
> ioc
->msix_vector_count
) {
1329 grouping
= ioc
->cpu_count
/ ioc
->msix_vector_count
;
1330 grouping_mod
= ioc
->cpu_count
% ioc
->msix_vector_count
;
1331 if (grouping
< 2 || (grouping
== 2 && !grouping_mod
))
1333 else if (grouping
< 4 || (grouping
== 4 && !grouping_mod
))
1335 else if (grouping
< 8 || (grouping
== 8 && !grouping_mod
))
1343 reply_q
= list_entry(ioc
->reply_queue_list
.next
,
1344 struct adapter_reply_queue
, list
);
1345 for_each_online_cpu(cpu_id
) {
1346 if (!cpu_grouping
) {
1347 ioc
->cpu_msix_table
[cpu_id
] = reply_q
->msix_index
;
1348 reply_q
= list_entry(reply_q
->list
.next
,
1349 struct adapter_reply_queue
, list
);
1351 if (loop
< cpu_grouping
) {
1352 ioc
->cpu_msix_table
[cpu_id
] =
1353 reply_q
->msix_index
;
1356 reply_q
= list_entry(reply_q
->list
.next
,
1357 struct adapter_reply_queue
, list
);
1358 ioc
->cpu_msix_table
[cpu_id
] =
1359 reply_q
->msix_index
;
1367 * _base_disable_msix - disables msix
1368 * @ioc: per adapter object
1372 _base_disable_msix(struct MPT2SAS_ADAPTER
*ioc
)
1374 if (ioc
->msix_enable
) {
1375 pci_disable_msix(ioc
->pdev
);
1376 ioc
->msix_enable
= 0;
1381 * _base_enable_msix - enables msix, failback to io_apic
1382 * @ioc: per adapter object
1386 _base_enable_msix(struct MPT2SAS_ADAPTER
*ioc
)
1388 struct msix_entry
*entries
, *a
;
1393 INIT_LIST_HEAD(&ioc
->reply_queue_list
);
1395 if (msix_disable
== -1 || msix_disable
== 0)
1401 if (_base_check_enable_msix(ioc
) != 0)
1404 ioc
->reply_queue_count
= min_t(int, ioc
->cpu_count
,
1405 ioc
->msix_vector_count
);
1407 entries
= kcalloc(ioc
->reply_queue_count
, sizeof(struct msix_entry
),
1410 dfailprintk(ioc
, printk(MPT2SAS_INFO_FMT
"kcalloc "
1411 "failed @ at %s:%d/%s() !!!\n", ioc
->name
, __FILE__
,
1412 __LINE__
, __func__
));
1416 for (i
= 0, a
= entries
; i
< ioc
->reply_queue_count
; i
++, a
++)
1419 r
= pci_enable_msix(ioc
->pdev
, entries
, ioc
->reply_queue_count
);
1421 dfailprintk(ioc
, printk(MPT2SAS_INFO_FMT
"pci_enable_msix "
1422 "failed (r=%d) !!!\n", ioc
->name
, r
));
1427 ioc
->msix_enable
= 1;
1428 for (i
= 0, a
= entries
; i
< ioc
->reply_queue_count
; i
++, a
++) {
1429 r
= _base_request_irq(ioc
, i
, a
->vector
);
1431 _base_free_irq(ioc
);
1432 _base_disable_msix(ioc
);
1441 /* failback to io_apic interrupt routing */
1444 r
= _base_request_irq(ioc
, 0, ioc
->pdev
->irq
);
1450 * mpt2sas_base_map_resources - map in controller resources (io/irq/memap)
1451 * @ioc: per adapter object
1453 * Returns 0 for success, non-zero for failure.
1456 mpt2sas_base_map_resources(struct MPT2SAS_ADAPTER
*ioc
)
1458 struct pci_dev
*pdev
= ioc
->pdev
;
1464 struct adapter_reply_queue
*reply_q
;
1466 dinitprintk(ioc
, printk(MPT2SAS_INFO_FMT
"%s\n",
1467 ioc
->name
, __func__
));
1469 ioc
->bars
= pci_select_bars(pdev
, IORESOURCE_MEM
);
1470 if (pci_enable_device_mem(pdev
)) {
1471 printk(MPT2SAS_WARN_FMT
"pci_enable_device_mem: "
1472 "failed\n", ioc
->name
);
1477 if (pci_request_selected_regions(pdev
, ioc
->bars
,
1478 MPT2SAS_DRIVER_NAME
)) {
1479 printk(MPT2SAS_WARN_FMT
"pci_request_selected_regions: "
1480 "failed\n", ioc
->name
);
1485 /* AER (Advanced Error Reporting) hooks */
1486 pci_enable_pcie_error_reporting(pdev
);
1488 pci_set_master(pdev
);
1490 if (_base_config_dma_addressing(ioc
, pdev
) != 0) {
1491 printk(MPT2SAS_WARN_FMT
"no suitable DMA mask for %s\n",
1492 ioc
->name
, pci_name(pdev
));
1497 for (i
= 0, memap_sz
= 0, pio_sz
= 0 ; i
< DEVICE_COUNT_RESOURCE
; i
++) {
1498 if (pci_resource_flags(pdev
, i
) & IORESOURCE_IO
) {
1501 pio_chip
= (u64
)pci_resource_start(pdev
, i
);
1502 pio_sz
= pci_resource_len(pdev
, i
);
1506 /* verify memory resource is valid before using */
1507 if (pci_resource_flags(pdev
, i
) & IORESOURCE_MEM
) {
1508 ioc
->chip_phys
= pci_resource_start(pdev
, i
);
1509 chip_phys
= (u64
)ioc
->chip_phys
;
1510 memap_sz
= pci_resource_len(pdev
, i
);
1511 ioc
->chip
= ioremap(ioc
->chip_phys
, memap_sz
);
1512 if (ioc
->chip
== NULL
) {
1513 printk(MPT2SAS_ERR_FMT
"unable to map "
1514 "adapter memory!\n", ioc
->name
);
1522 _base_mask_interrupts(ioc
);
1523 r
= _base_enable_msix(ioc
);
1527 list_for_each_entry(reply_q
, &ioc
->reply_queue_list
, list
)
1528 printk(MPT2SAS_INFO_FMT
"%s: IRQ %d\n",
1529 reply_q
->name
, ((ioc
->msix_enable
) ? "PCI-MSI-X enabled" :
1530 "IO-APIC enabled"), reply_q
->vector
);
1532 printk(MPT2SAS_INFO_FMT
"iomem(0x%016llx), mapped(0x%p), size(%d)\n",
1533 ioc
->name
, (unsigned long long)chip_phys
, ioc
->chip
, memap_sz
);
1534 printk(MPT2SAS_INFO_FMT
"ioport(0x%016llx), size(%d)\n",
1535 ioc
->name
, (unsigned long long)pio_chip
, pio_sz
);
1537 /* Save PCI configuration state for recovery from PCI AER/EEH errors */
1538 pci_save_state(pdev
);
1546 pci_release_selected_regions(ioc
->pdev
, ioc
->bars
);
1547 pci_disable_pcie_error_reporting(pdev
);
1548 pci_disable_device(pdev
);
1553 * mpt2sas_base_get_msg_frame - obtain request mf pointer
1554 * @ioc: per adapter object
1555 * @smid: system request message index(smid zero is invalid)
1557 * Returns virt pointer to message frame.
1560 mpt2sas_base_get_msg_frame(struct MPT2SAS_ADAPTER
*ioc
, u16 smid
)
1562 return (void *)(ioc
->request
+ (smid
* ioc
->request_sz
));
1566 * mpt2sas_base_get_sense_buffer - obtain a sense buffer assigned to a mf request
1567 * @ioc: per adapter object
1568 * @smid: system request message index
1570 * Returns virt pointer to sense buffer.
1573 mpt2sas_base_get_sense_buffer(struct MPT2SAS_ADAPTER
*ioc
, u16 smid
)
1575 return (void *)(ioc
->sense
+ ((smid
- 1) * SCSI_SENSE_BUFFERSIZE
));
1579 * mpt2sas_base_get_sense_buffer_dma - obtain a sense buffer assigned to a mf request
1580 * @ioc: per adapter object
1581 * @smid: system request message index
1583 * Returns phys pointer to the low 32bit address of the sense buffer.
1586 mpt2sas_base_get_sense_buffer_dma(struct MPT2SAS_ADAPTER
*ioc
, u16 smid
)
1588 return cpu_to_le32(ioc
->sense_dma
+
1589 ((smid
- 1) * SCSI_SENSE_BUFFERSIZE
));
1593 * mpt2sas_base_get_reply_virt_addr - obtain reply frames virt address
1594 * @ioc: per adapter object
1595 * @phys_addr: lower 32 physical addr of the reply
1597 * Converts 32bit lower physical addr into a virt address.
1600 mpt2sas_base_get_reply_virt_addr(struct MPT2SAS_ADAPTER
*ioc
, u32 phys_addr
)
1604 return ioc
->reply
+ (phys_addr
- (u32
)ioc
->reply_dma
);
1608 * mpt2sas_base_get_smid - obtain a free smid from internal queue
1609 * @ioc: per adapter object
1610 * @cb_idx: callback index
1612 * Returns smid (zero is invalid)
1615 mpt2sas_base_get_smid(struct MPT2SAS_ADAPTER
*ioc
, u8 cb_idx
)
1617 unsigned long flags
;
1618 struct request_tracker
*request
;
1621 spin_lock_irqsave(&ioc
->scsi_lookup_lock
, flags
);
1622 if (list_empty(&ioc
->internal_free_list
)) {
1623 spin_unlock_irqrestore(&ioc
->scsi_lookup_lock
, flags
);
1624 printk(MPT2SAS_ERR_FMT
"%s: smid not available\n",
1625 ioc
->name
, __func__
);
1629 request
= list_entry(ioc
->internal_free_list
.next
,
1630 struct request_tracker
, tracker_list
);
1631 request
->cb_idx
= cb_idx
;
1632 smid
= request
->smid
;
1633 list_del(&request
->tracker_list
);
1634 spin_unlock_irqrestore(&ioc
->scsi_lookup_lock
, flags
);
1639 * mpt2sas_base_get_smid_scsiio - obtain a free smid from scsiio queue
1640 * @ioc: per adapter object
1641 * @cb_idx: callback index
1642 * @scmd: pointer to scsi command object
1644 * Returns smid (zero is invalid)
1647 mpt2sas_base_get_smid_scsiio(struct MPT2SAS_ADAPTER
*ioc
, u8 cb_idx
,
1648 struct scsi_cmnd
*scmd
)
1650 unsigned long flags
;
1651 struct scsiio_tracker
*request
;
1654 spin_lock_irqsave(&ioc
->scsi_lookup_lock
, flags
);
1655 if (list_empty(&ioc
->free_list
)) {
1656 spin_unlock_irqrestore(&ioc
->scsi_lookup_lock
, flags
);
1657 printk(MPT2SAS_ERR_FMT
"%s: smid not available\n",
1658 ioc
->name
, __func__
);
1662 request
= list_entry(ioc
->free_list
.next
,
1663 struct scsiio_tracker
, tracker_list
);
1664 request
->scmd
= scmd
;
1665 request
->cb_idx
= cb_idx
;
1666 smid
= request
->smid
;
1667 list_del(&request
->tracker_list
);
1668 spin_unlock_irqrestore(&ioc
->scsi_lookup_lock
, flags
);
1673 * mpt2sas_base_get_smid_hpr - obtain a free smid from hi-priority queue
1674 * @ioc: per adapter object
1675 * @cb_idx: callback index
1677 * Returns smid (zero is invalid)
1680 mpt2sas_base_get_smid_hpr(struct MPT2SAS_ADAPTER
*ioc
, u8 cb_idx
)
1682 unsigned long flags
;
1683 struct request_tracker
*request
;
1686 spin_lock_irqsave(&ioc
->scsi_lookup_lock
, flags
);
1687 if (list_empty(&ioc
->hpr_free_list
)) {
1688 spin_unlock_irqrestore(&ioc
->scsi_lookup_lock
, flags
);
1692 request
= list_entry(ioc
->hpr_free_list
.next
,
1693 struct request_tracker
, tracker_list
);
1694 request
->cb_idx
= cb_idx
;
1695 smid
= request
->smid
;
1696 list_del(&request
->tracker_list
);
1697 spin_unlock_irqrestore(&ioc
->scsi_lookup_lock
, flags
);
1703 * mpt2sas_base_free_smid - put smid back on free_list
1704 * @ioc: per adapter object
1705 * @smid: system request message index
1710 mpt2sas_base_free_smid(struct MPT2SAS_ADAPTER
*ioc
, u16 smid
)
1712 unsigned long flags
;
1714 struct chain_tracker
*chain_req
, *next
;
1716 spin_lock_irqsave(&ioc
->scsi_lookup_lock
, flags
);
1717 if (smid
< ioc
->hi_priority_smid
) {
1720 if (!list_empty(&ioc
->scsi_lookup
[i
].chain_list
)) {
1721 list_for_each_entry_safe(chain_req
, next
,
1722 &ioc
->scsi_lookup
[i
].chain_list
, tracker_list
) {
1723 list_del_init(&chain_req
->tracker_list
);
1724 list_add_tail(&chain_req
->tracker_list
,
1725 &ioc
->free_chain_list
);
1728 ioc
->scsi_lookup
[i
].cb_idx
= 0xFF;
1729 ioc
->scsi_lookup
[i
].scmd
= NULL
;
1730 ioc
->scsi_lookup
[i
].direct_io
= 0;
1731 list_add_tail(&ioc
->scsi_lookup
[i
].tracker_list
,
1733 spin_unlock_irqrestore(&ioc
->scsi_lookup_lock
, flags
);
1736 * See _wait_for_commands_to_complete() call with regards
1739 if (ioc
->shost_recovery
&& ioc
->pending_io_count
) {
1740 if (ioc
->pending_io_count
== 1)
1741 wake_up(&ioc
->reset_wq
);
1742 ioc
->pending_io_count
--;
1745 } else if (smid
< ioc
->internal_smid
) {
1747 i
= smid
- ioc
->hi_priority_smid
;
1748 ioc
->hpr_lookup
[i
].cb_idx
= 0xFF;
1749 list_add_tail(&ioc
->hpr_lookup
[i
].tracker_list
,
1750 &ioc
->hpr_free_list
);
1751 } else if (smid
<= ioc
->hba_queue_depth
) {
1752 /* internal queue */
1753 i
= smid
- ioc
->internal_smid
;
1754 ioc
->internal_lookup
[i
].cb_idx
= 0xFF;
1755 list_add_tail(&ioc
->internal_lookup
[i
].tracker_list
,
1756 &ioc
->internal_free_list
);
1758 spin_unlock_irqrestore(&ioc
->scsi_lookup_lock
, flags
);
1762 * _base_writeq - 64 bit write to MMIO
1763 * @ioc: per adapter object
1765 * @addr: address in MMIO space
1766 * @writeq_lock: spin lock
1768 * Glue for handling an atomic 64 bit word to MMIO. This special handling takes
1769 * care of 32 bit environment where its not quarenteed to send the entire word
1773 static inline void _base_writeq(__u64 b
, volatile void __iomem
*addr
,
1774 spinlock_t
*writeq_lock
)
1776 unsigned long flags
;
1777 __u64 data_out
= cpu_to_le64(b
);
1779 spin_lock_irqsave(writeq_lock
, flags
);
1780 writel((u32
)(data_out
), addr
);
1781 writel((u32
)(data_out
>> 32), (addr
+ 4));
1782 spin_unlock_irqrestore(writeq_lock
, flags
);
1785 static inline void _base_writeq(__u64 b
, volatile void __iomem
*addr
,
1786 spinlock_t
*writeq_lock
)
1788 writeq(cpu_to_le64(b
), addr
);
1793 _base_get_msix_index(struct MPT2SAS_ADAPTER
*ioc
)
1795 return ioc
->cpu_msix_table
[raw_smp_processor_id()];
1799 * mpt2sas_base_put_smid_scsi_io - send SCSI_IO request to firmware
1800 * @ioc: per adapter object
1801 * @smid: system request message index
1802 * @handle: device handle
1807 mpt2sas_base_put_smid_scsi_io(struct MPT2SAS_ADAPTER
*ioc
, u16 smid
, u16 handle
)
1809 Mpi2RequestDescriptorUnion_t descriptor
;
1810 u64
*request
= (u64
*)&descriptor
;
1813 descriptor
.SCSIIO
.RequestFlags
= MPI2_REQ_DESCRIPT_FLAGS_SCSI_IO
;
1814 descriptor
.SCSIIO
.MSIxIndex
= _base_get_msix_index(ioc
);
1815 descriptor
.SCSIIO
.SMID
= cpu_to_le16(smid
);
1816 descriptor
.SCSIIO
.DevHandle
= cpu_to_le16(handle
);
1817 descriptor
.SCSIIO
.LMID
= 0;
1818 _base_writeq(*request
, &ioc
->chip
->RequestDescriptorPostLow
,
1819 &ioc
->scsi_lookup_lock
);
1824 * mpt2sas_base_put_smid_hi_priority - send Task Management request to firmware
1825 * @ioc: per adapter object
1826 * @smid: system request message index
1831 mpt2sas_base_put_smid_hi_priority(struct MPT2SAS_ADAPTER
*ioc
, u16 smid
)
1833 Mpi2RequestDescriptorUnion_t descriptor
;
1834 u64
*request
= (u64
*)&descriptor
;
1836 descriptor
.HighPriority
.RequestFlags
=
1837 MPI2_REQ_DESCRIPT_FLAGS_HIGH_PRIORITY
;
1838 descriptor
.HighPriority
.MSIxIndex
= 0;
1839 descriptor
.HighPriority
.SMID
= cpu_to_le16(smid
);
1840 descriptor
.HighPriority
.LMID
= 0;
1841 descriptor
.HighPriority
.Reserved1
= 0;
1842 _base_writeq(*request
, &ioc
->chip
->RequestDescriptorPostLow
,
1843 &ioc
->scsi_lookup_lock
);
1847 * mpt2sas_base_put_smid_default - Default, primarily used for config pages
1848 * @ioc: per adapter object
1849 * @smid: system request message index
1854 mpt2sas_base_put_smid_default(struct MPT2SAS_ADAPTER
*ioc
, u16 smid
)
1856 Mpi2RequestDescriptorUnion_t descriptor
;
1857 u64
*request
= (u64
*)&descriptor
;
1859 descriptor
.Default
.RequestFlags
= MPI2_REQ_DESCRIPT_FLAGS_DEFAULT_TYPE
;
1860 descriptor
.Default
.MSIxIndex
= _base_get_msix_index(ioc
);
1861 descriptor
.Default
.SMID
= cpu_to_le16(smid
);
1862 descriptor
.Default
.LMID
= 0;
1863 descriptor
.Default
.DescriptorTypeDependent
= 0;
1864 _base_writeq(*request
, &ioc
->chip
->RequestDescriptorPostLow
,
1865 &ioc
->scsi_lookup_lock
);
1869 * mpt2sas_base_put_smid_target_assist - send Target Assist/Status to firmware
1870 * @ioc: per adapter object
1871 * @smid: system request message index
1872 * @io_index: value used to track the IO
1877 mpt2sas_base_put_smid_target_assist(struct MPT2SAS_ADAPTER
*ioc
, u16 smid
,
1880 Mpi2RequestDescriptorUnion_t descriptor
;
1881 u64
*request
= (u64
*)&descriptor
;
1883 descriptor
.SCSITarget
.RequestFlags
=
1884 MPI2_REQ_DESCRIPT_FLAGS_SCSI_TARGET
;
1885 descriptor
.SCSITarget
.MSIxIndex
= _base_get_msix_index(ioc
);
1886 descriptor
.SCSITarget
.SMID
= cpu_to_le16(smid
);
1887 descriptor
.SCSITarget
.LMID
= 0;
1888 descriptor
.SCSITarget
.IoIndex
= cpu_to_le16(io_index
);
1889 _base_writeq(*request
, &ioc
->chip
->RequestDescriptorPostLow
,
1890 &ioc
->scsi_lookup_lock
);
1894 * _base_display_dell_branding - Disply branding string
1895 * @ioc: per adapter object
1900 _base_display_dell_branding(struct MPT2SAS_ADAPTER
*ioc
)
1902 char dell_branding
[MPT2SAS_DELL_BRANDING_SIZE
];
1904 if (ioc
->pdev
->subsystem_vendor
!= PCI_VENDOR_ID_DELL
)
1907 memset(dell_branding
, 0, MPT2SAS_DELL_BRANDING_SIZE
);
1908 switch (ioc
->pdev
->subsystem_device
) {
1909 case MPT2SAS_DELL_6GBPS_SAS_HBA_SSDID
:
1910 strncpy(dell_branding
, MPT2SAS_DELL_6GBPS_SAS_HBA_BRANDING
,
1911 MPT2SAS_DELL_BRANDING_SIZE
- 1);
1913 case MPT2SAS_DELL_PERC_H200_ADAPTER_SSDID
:
1914 strncpy(dell_branding
, MPT2SAS_DELL_PERC_H200_ADAPTER_BRANDING
,
1915 MPT2SAS_DELL_BRANDING_SIZE
- 1);
1917 case MPT2SAS_DELL_PERC_H200_INTEGRATED_SSDID
:
1918 strncpy(dell_branding
,
1919 MPT2SAS_DELL_PERC_H200_INTEGRATED_BRANDING
,
1920 MPT2SAS_DELL_BRANDING_SIZE
- 1);
1922 case MPT2SAS_DELL_PERC_H200_MODULAR_SSDID
:
1923 strncpy(dell_branding
,
1924 MPT2SAS_DELL_PERC_H200_MODULAR_BRANDING
,
1925 MPT2SAS_DELL_BRANDING_SIZE
- 1);
1927 case MPT2SAS_DELL_PERC_H200_EMBEDDED_SSDID
:
1928 strncpy(dell_branding
,
1929 MPT2SAS_DELL_PERC_H200_EMBEDDED_BRANDING
,
1930 MPT2SAS_DELL_BRANDING_SIZE
- 1);
1932 case MPT2SAS_DELL_PERC_H200_SSDID
:
1933 strncpy(dell_branding
, MPT2SAS_DELL_PERC_H200_BRANDING
,
1934 MPT2SAS_DELL_BRANDING_SIZE
- 1);
1936 case MPT2SAS_DELL_6GBPS_SAS_SSDID
:
1937 strncpy(dell_branding
, MPT2SAS_DELL_6GBPS_SAS_BRANDING
,
1938 MPT2SAS_DELL_BRANDING_SIZE
- 1);
1941 sprintf(dell_branding
, "0x%4X", ioc
->pdev
->subsystem_device
);
1945 printk(MPT2SAS_INFO_FMT
"%s: Vendor(0x%04X), Device(0x%04X),"
1946 " SSVID(0x%04X), SSDID(0x%04X)\n", ioc
->name
, dell_branding
,
1947 ioc
->pdev
->vendor
, ioc
->pdev
->device
, ioc
->pdev
->subsystem_vendor
,
1948 ioc
->pdev
->subsystem_device
);
1952 * _base_display_intel_branding - Display branding string
1953 * @ioc: per adapter object
1958 _base_display_intel_branding(struct MPT2SAS_ADAPTER
*ioc
)
1960 if (ioc
->pdev
->subsystem_vendor
!= PCI_VENDOR_ID_INTEL
)
1963 switch (ioc
->pdev
->device
) {
1964 case MPI2_MFGPAGE_DEVID_SAS2008
:
1965 switch (ioc
->pdev
->subsystem_device
) {
1966 case MPT2SAS_INTEL_RMS2LL080_SSDID
:
1967 printk(MPT2SAS_INFO_FMT
"%s\n", ioc
->name
,
1968 MPT2SAS_INTEL_RMS2LL080_BRANDING
);
1970 case MPT2SAS_INTEL_RMS2LL040_SSDID
:
1971 printk(MPT2SAS_INFO_FMT
"%s\n", ioc
->name
,
1972 MPT2SAS_INTEL_RMS2LL040_BRANDING
);
1974 case MPT2SAS_INTEL_RAMSDALE_SSDID
:
1975 printk(MPT2SAS_INFO_FMT
"%s\n", ioc
->name
,
1976 MPT2SAS_INTEL_RAMSDALE_BRANDING
);
1981 case MPI2_MFGPAGE_DEVID_SAS2308_2
:
1982 switch (ioc
->pdev
->subsystem_device
) {
1983 case MPT2SAS_INTEL_RS25GB008_SSDID
:
1984 printk(MPT2SAS_INFO_FMT
"%s\n", ioc
->name
,
1985 MPT2SAS_INTEL_RS25GB008_BRANDING
);
1987 case MPT2SAS_INTEL_RMS25JB080_SSDID
:
1988 printk(MPT2SAS_INFO_FMT
"%s\n", ioc
->name
,
1989 MPT2SAS_INTEL_RMS25JB080_BRANDING
);
1991 case MPT2SAS_INTEL_RMS25JB040_SSDID
:
1992 printk(MPT2SAS_INFO_FMT
"%s\n", ioc
->name
,
1993 MPT2SAS_INTEL_RMS25JB040_BRANDING
);
1995 case MPT2SAS_INTEL_RMS25KB080_SSDID
:
1996 printk(MPT2SAS_INFO_FMT
"%s\n", ioc
->name
,
1997 MPT2SAS_INTEL_RMS25KB080_BRANDING
);
1999 case MPT2SAS_INTEL_RMS25KB040_SSDID
:
2000 printk(MPT2SAS_INFO_FMT
"%s\n", ioc
->name
,
2001 MPT2SAS_INTEL_RMS25KB040_BRANDING
);
2012 * _base_display_hp_branding - Display branding string
2013 * @ioc: per adapter object
2018 _base_display_hp_branding(struct MPT2SAS_ADAPTER
*ioc
)
2020 if (ioc
->pdev
->subsystem_vendor
!= MPT2SAS_HP_3PAR_SSVID
)
2023 switch (ioc
->pdev
->device
) {
2024 case MPI2_MFGPAGE_DEVID_SAS2004
:
2025 switch (ioc
->pdev
->subsystem_device
) {
2026 case MPT2SAS_HP_DAUGHTER_2_4_INTERNAL_SSDID
:
2027 printk(MPT2SAS_INFO_FMT
"%s\n", ioc
->name
,
2028 MPT2SAS_HP_DAUGHTER_2_4_INTERNAL_BRANDING
);
2033 case MPI2_MFGPAGE_DEVID_SAS2308_2
:
2034 switch (ioc
->pdev
->subsystem_device
) {
2035 case MPT2SAS_HP_2_4_INTERNAL_SSDID
:
2036 printk(MPT2SAS_INFO_FMT
"%s\n", ioc
->name
,
2037 MPT2SAS_HP_2_4_INTERNAL_BRANDING
);
2039 case MPT2SAS_HP_2_4_EXTERNAL_SSDID
:
2040 printk(MPT2SAS_INFO_FMT
"%s\n", ioc
->name
,
2041 MPT2SAS_HP_2_4_EXTERNAL_BRANDING
);
2043 case MPT2SAS_HP_1_4_INTERNAL_1_4_EXTERNAL_SSDID
:
2044 printk(MPT2SAS_INFO_FMT
"%s\n", ioc
->name
,
2045 MPT2SAS_HP_1_4_INTERNAL_1_4_EXTERNAL_BRANDING
);
2047 case MPT2SAS_HP_EMBEDDED_2_4_INTERNAL_SSDID
:
2048 printk(MPT2SAS_INFO_FMT
"%s\n", ioc
->name
,
2049 MPT2SAS_HP_EMBEDDED_2_4_INTERNAL_BRANDING
);
2060 * _base_display_ioc_capabilities - Disply IOC's capabilities.
2061 * @ioc: per adapter object
2066 _base_display_ioc_capabilities(struct MPT2SAS_ADAPTER
*ioc
)
2070 u32 iounit_pg1_flags
;
2073 bios_version
= le32_to_cpu(ioc
->bios_pg3
.BiosVersion
);
2074 strncpy(desc
, ioc
->manu_pg0
.ChipName
, 16);
2075 printk(MPT2SAS_INFO_FMT
"%s: FWVersion(%02d.%02d.%02d.%02d), "
2076 "ChipRevision(0x%02x), BiosVersion(%02d.%02d.%02d.%02d)\n",
2078 (ioc
->facts
.FWVersion
.Word
& 0xFF000000) >> 24,
2079 (ioc
->facts
.FWVersion
.Word
& 0x00FF0000) >> 16,
2080 (ioc
->facts
.FWVersion
.Word
& 0x0000FF00) >> 8,
2081 ioc
->facts
.FWVersion
.Word
& 0x000000FF,
2082 ioc
->pdev
->revision
,
2083 (bios_version
& 0xFF000000) >> 24,
2084 (bios_version
& 0x00FF0000) >> 16,
2085 (bios_version
& 0x0000FF00) >> 8,
2086 bios_version
& 0x000000FF);
2088 _base_display_dell_branding(ioc
);
2089 _base_display_intel_branding(ioc
);
2090 _base_display_hp_branding(ioc
);
2092 printk(MPT2SAS_INFO_FMT
"Protocol=(", ioc
->name
);
2094 if (ioc
->facts
.ProtocolFlags
& MPI2_IOCFACTS_PROTOCOL_SCSI_INITIATOR
) {
2095 printk("Initiator");
2099 if (ioc
->facts
.ProtocolFlags
& MPI2_IOCFACTS_PROTOCOL_SCSI_TARGET
) {
2100 printk("%sTarget", i
? "," : "");
2106 printk("Capabilities=(");
2108 if (!ioc
->hide_ir_msg
) {
2109 if (ioc
->facts
.IOCCapabilities
&
2110 MPI2_IOCFACTS_CAPABILITY_INTEGRATED_RAID
) {
2116 if (ioc
->facts
.IOCCapabilities
& MPI2_IOCFACTS_CAPABILITY_TLR
) {
2117 printk("%sTLR", i
? "," : "");
2121 if (ioc
->facts
.IOCCapabilities
& MPI2_IOCFACTS_CAPABILITY_MULTICAST
) {
2122 printk("%sMulticast", i
? "," : "");
2126 if (ioc
->facts
.IOCCapabilities
&
2127 MPI2_IOCFACTS_CAPABILITY_BIDIRECTIONAL_TARGET
) {
2128 printk("%sBIDI Target", i
? "," : "");
2132 if (ioc
->facts
.IOCCapabilities
& MPI2_IOCFACTS_CAPABILITY_EEDP
) {
2133 printk("%sEEDP", i
? "," : "");
2137 if (ioc
->facts
.IOCCapabilities
&
2138 MPI2_IOCFACTS_CAPABILITY_SNAPSHOT_BUFFER
) {
2139 printk("%sSnapshot Buffer", i
? "," : "");
2143 if (ioc
->facts
.IOCCapabilities
&
2144 MPI2_IOCFACTS_CAPABILITY_DIAG_TRACE_BUFFER
) {
2145 printk("%sDiag Trace Buffer", i
? "," : "");
2149 if (ioc
->facts
.IOCCapabilities
&
2150 MPI2_IOCFACTS_CAPABILITY_EXTENDED_BUFFER
) {
2151 printk(KERN_INFO
"%sDiag Extended Buffer", i
? "," : "");
2155 if (ioc
->facts
.IOCCapabilities
&
2156 MPI2_IOCFACTS_CAPABILITY_TASK_SET_FULL_HANDLING
) {
2157 printk("%sTask Set Full", i
? "," : "");
2161 iounit_pg1_flags
= le32_to_cpu(ioc
->iounit_pg1
.Flags
);
2162 if (!(iounit_pg1_flags
& MPI2_IOUNITPAGE1_NATIVE_COMMAND_Q_DISABLE
)) {
2163 printk("%sNCQ", i
? "," : "");
2171 * _base_update_missing_delay - change the missing delay timers
2172 * @ioc: per adapter object
2173 * @device_missing_delay: amount of time till device is reported missing
2174 * @io_missing_delay: interval IO is returned when there is a missing device
2178 * Passed on the command line, this function will modify the device missing
2179 * delay, as well as the io missing delay. This should be called at driver
2183 _base_update_missing_delay(struct MPT2SAS_ADAPTER
*ioc
,
2184 u16 device_missing_delay
, u8 io_missing_delay
)
2186 u16 dmd
, dmd_new
, dmd_orignal
;
2187 u8 io_missing_delay_original
;
2189 Mpi2SasIOUnitPage1_t
*sas_iounit_pg1
= NULL
;
2190 Mpi2ConfigReply_t mpi_reply
;
2194 mpt2sas_config_get_number_hba_phys(ioc
, &num_phys
);
2198 sz
= offsetof(Mpi2SasIOUnitPage1_t
, PhyData
) + (num_phys
*
2199 sizeof(Mpi2SasIOUnit1PhyData_t
));
2200 sas_iounit_pg1
= kzalloc(sz
, GFP_KERNEL
);
2201 if (!sas_iounit_pg1
) {
2202 printk(MPT2SAS_ERR_FMT
"failure at %s:%d/%s()!\n",
2203 ioc
->name
, __FILE__
, __LINE__
, __func__
);
2206 if ((mpt2sas_config_get_sas_iounit_pg1(ioc
, &mpi_reply
,
2207 sas_iounit_pg1
, sz
))) {
2208 printk(MPT2SAS_ERR_FMT
"failure at %s:%d/%s()!\n",
2209 ioc
->name
, __FILE__
, __LINE__
, __func__
);
2212 ioc_status
= le16_to_cpu(mpi_reply
.IOCStatus
) &
2213 MPI2_IOCSTATUS_MASK
;
2214 if (ioc_status
!= MPI2_IOCSTATUS_SUCCESS
) {
2215 printk(MPT2SAS_ERR_FMT
"failure at %s:%d/%s()!\n",
2216 ioc
->name
, __FILE__
, __LINE__
, __func__
);
2220 /* device missing delay */
2221 dmd
= sas_iounit_pg1
->ReportDeviceMissingDelay
;
2222 if (dmd
& MPI2_SASIOUNIT1_REPORT_MISSING_UNIT_16
)
2223 dmd
= (dmd
& MPI2_SASIOUNIT1_REPORT_MISSING_TIMEOUT_MASK
) * 16;
2225 dmd
= dmd
& MPI2_SASIOUNIT1_REPORT_MISSING_TIMEOUT_MASK
;
2227 if (device_missing_delay
> 0x7F) {
2228 dmd
= (device_missing_delay
> 0x7F0) ? 0x7F0 :
2229 device_missing_delay
;
2231 dmd
|= MPI2_SASIOUNIT1_REPORT_MISSING_UNIT_16
;
2233 dmd
= device_missing_delay
;
2234 sas_iounit_pg1
->ReportDeviceMissingDelay
= dmd
;
2236 /* io missing delay */
2237 io_missing_delay_original
= sas_iounit_pg1
->IODeviceMissingDelay
;
2238 sas_iounit_pg1
->IODeviceMissingDelay
= io_missing_delay
;
2240 if (!mpt2sas_config_set_sas_iounit_pg1(ioc
, &mpi_reply
, sas_iounit_pg1
,
2242 if (dmd
& MPI2_SASIOUNIT1_REPORT_MISSING_UNIT_16
)
2244 MPI2_SASIOUNIT1_REPORT_MISSING_TIMEOUT_MASK
) * 16;
2247 dmd
& MPI2_SASIOUNIT1_REPORT_MISSING_TIMEOUT_MASK
;
2248 printk(MPT2SAS_INFO_FMT
"device_missing_delay: old(%d), "
2249 "new(%d)\n", ioc
->name
, dmd_orignal
, dmd_new
);
2250 printk(MPT2SAS_INFO_FMT
"ioc_missing_delay: old(%d), "
2251 "new(%d)\n", ioc
->name
, io_missing_delay_original
,
2253 ioc
->device_missing_delay
= dmd_new
;
2254 ioc
->io_missing_delay
= io_missing_delay
;
2258 kfree(sas_iounit_pg1
);
2262 * _base_static_config_pages - static start of day config pages
2263 * @ioc: per adapter object
2268 _base_static_config_pages(struct MPT2SAS_ADAPTER
*ioc
)
2270 Mpi2ConfigReply_t mpi_reply
;
2271 u32 iounit_pg1_flags
;
2273 mpt2sas_config_get_manufacturing_pg0(ioc
, &mpi_reply
, &ioc
->manu_pg0
);
2274 if (ioc
->ir_firmware
)
2275 mpt2sas_config_get_manufacturing_pg10(ioc
, &mpi_reply
,
2277 mpt2sas_config_get_bios_pg2(ioc
, &mpi_reply
, &ioc
->bios_pg2
);
2278 mpt2sas_config_get_bios_pg3(ioc
, &mpi_reply
, &ioc
->bios_pg3
);
2279 mpt2sas_config_get_ioc_pg8(ioc
, &mpi_reply
, &ioc
->ioc_pg8
);
2280 mpt2sas_config_get_iounit_pg0(ioc
, &mpi_reply
, &ioc
->iounit_pg0
);
2281 mpt2sas_config_get_iounit_pg1(ioc
, &mpi_reply
, &ioc
->iounit_pg1
);
2282 _base_display_ioc_capabilities(ioc
);
2285 * Enable task_set_full handling in iounit_pg1 when the
2286 * facts capabilities indicate that its supported.
2288 iounit_pg1_flags
= le32_to_cpu(ioc
->iounit_pg1
.Flags
);
2289 if ((ioc
->facts
.IOCCapabilities
&
2290 MPI2_IOCFACTS_CAPABILITY_TASK_SET_FULL_HANDLING
))
2292 ~MPI2_IOUNITPAGE1_DISABLE_TASK_SET_FULL_HANDLING
;
2295 MPI2_IOUNITPAGE1_DISABLE_TASK_SET_FULL_HANDLING
;
2296 ioc
->iounit_pg1
.Flags
= cpu_to_le32(iounit_pg1_flags
);
2297 mpt2sas_config_set_iounit_pg1(ioc
, &mpi_reply
, &ioc
->iounit_pg1
);
2302 * _base_release_memory_pools - release memory
2303 * @ioc: per adapter object
2305 * Free memory allocated from _base_allocate_memory_pools.
2310 _base_release_memory_pools(struct MPT2SAS_ADAPTER
*ioc
)
2314 dexitprintk(ioc
, printk(MPT2SAS_INFO_FMT
"%s\n", ioc
->name
,
2318 pci_free_consistent(ioc
->pdev
, ioc
->request_dma_sz
,
2319 ioc
->request
, ioc
->request_dma
);
2320 dexitprintk(ioc
, printk(MPT2SAS_INFO_FMT
"request_pool(0x%p)"
2321 ": free\n", ioc
->name
, ioc
->request
));
2322 ioc
->request
= NULL
;
2326 pci_pool_free(ioc
->sense_dma_pool
, ioc
->sense
, ioc
->sense_dma
);
2327 if (ioc
->sense_dma_pool
)
2328 pci_pool_destroy(ioc
->sense_dma_pool
);
2329 dexitprintk(ioc
, printk(MPT2SAS_INFO_FMT
"sense_pool(0x%p)"
2330 ": free\n", ioc
->name
, ioc
->sense
));
2335 pci_pool_free(ioc
->reply_dma_pool
, ioc
->reply
, ioc
->reply_dma
);
2336 if (ioc
->reply_dma_pool
)
2337 pci_pool_destroy(ioc
->reply_dma_pool
);
2338 dexitprintk(ioc
, printk(MPT2SAS_INFO_FMT
"reply_pool(0x%p)"
2339 ": free\n", ioc
->name
, ioc
->reply
));
2343 if (ioc
->reply_free
) {
2344 pci_pool_free(ioc
->reply_free_dma_pool
, ioc
->reply_free
,
2345 ioc
->reply_free_dma
);
2346 if (ioc
->reply_free_dma_pool
)
2347 pci_pool_destroy(ioc
->reply_free_dma_pool
);
2348 dexitprintk(ioc
, printk(MPT2SAS_INFO_FMT
"reply_free_pool"
2349 "(0x%p): free\n", ioc
->name
, ioc
->reply_free
));
2350 ioc
->reply_free
= NULL
;
2353 if (ioc
->reply_post_free
) {
2354 pci_pool_free(ioc
->reply_post_free_dma_pool
,
2355 ioc
->reply_post_free
, ioc
->reply_post_free_dma
);
2356 if (ioc
->reply_post_free_dma_pool
)
2357 pci_pool_destroy(ioc
->reply_post_free_dma_pool
);
2358 dexitprintk(ioc
, printk(MPT2SAS_INFO_FMT
2359 "reply_post_free_pool(0x%p): free\n", ioc
->name
,
2360 ioc
->reply_post_free
));
2361 ioc
->reply_post_free
= NULL
;
2364 if (ioc
->config_page
) {
2365 dexitprintk(ioc
, printk(MPT2SAS_INFO_FMT
2366 "config_page(0x%p): free\n", ioc
->name
,
2368 pci_free_consistent(ioc
->pdev
, ioc
->config_page_sz
,
2369 ioc
->config_page
, ioc
->config_page_dma
);
2372 if (ioc
->scsi_lookup
) {
2373 free_pages((ulong
)ioc
->scsi_lookup
, ioc
->scsi_lookup_pages
);
2374 ioc
->scsi_lookup
= NULL
;
2376 kfree(ioc
->hpr_lookup
);
2377 kfree(ioc
->internal_lookup
);
2378 if (ioc
->chain_lookup
) {
2379 for (i
= 0; i
< ioc
->chain_depth
; i
++) {
2380 if (ioc
->chain_lookup
[i
].chain_buffer
)
2381 pci_pool_free(ioc
->chain_dma_pool
,
2382 ioc
->chain_lookup
[i
].chain_buffer
,
2383 ioc
->chain_lookup
[i
].chain_buffer_dma
);
2385 if (ioc
->chain_dma_pool
)
2386 pci_pool_destroy(ioc
->chain_dma_pool
);
2387 free_pages((ulong
)ioc
->chain_lookup
, ioc
->chain_pages
);
2388 ioc
->chain_lookup
= NULL
;
2394 * _base_allocate_memory_pools - allocate start of day memory pools
2395 * @ioc: per adapter object
2396 * @sleep_flag: CAN_SLEEP or NO_SLEEP
2398 * Returns 0 success, anything else error
2401 _base_allocate_memory_pools(struct MPT2SAS_ADAPTER
*ioc
, int sleep_flag
)
2403 struct mpt2sas_facts
*facts
;
2404 u16 max_sge_elements
;
2405 u16 chains_needed_per_io
;
2406 u32 sz
, total_sz
, reply_post_free_sz
;
2408 u16 max_request_credit
;
2411 dinitprintk(ioc
, printk(MPT2SAS_INFO_FMT
"%s\n", ioc
->name
,
2415 facts
= &ioc
->facts
;
2417 /* command line tunables for max sgl entries */
2418 if (max_sgl_entries
!= -1) {
2419 ioc
->shost
->sg_tablesize
= (max_sgl_entries
<
2420 MPT2SAS_SG_DEPTH
) ? max_sgl_entries
:
2423 ioc
->shost
->sg_tablesize
= MPT2SAS_SG_DEPTH
;
2426 /* command line tunables for max controller queue depth */
2427 if (max_queue_depth
!= -1)
2428 max_request_credit
= (max_queue_depth
< facts
->RequestCredit
)
2429 ? max_queue_depth
: facts
->RequestCredit
;
2431 max_request_credit
= min_t(u16
, facts
->RequestCredit
,
2432 MAX_HBA_QUEUE_DEPTH
);
2434 ioc
->hba_queue_depth
= max_request_credit
;
2435 ioc
->hi_priority_depth
= facts
->HighPriorityCredit
;
2436 ioc
->internal_depth
= ioc
->hi_priority_depth
+ 5;
2438 /* request frame size */
2439 ioc
->request_sz
= facts
->IOCRequestFrameSize
* 4;
2441 /* reply frame size */
2442 ioc
->reply_sz
= facts
->ReplyFrameSize
* 4;
2446 /* calculate number of sg elements left over in the 1st frame */
2447 max_sge_elements
= ioc
->request_sz
- ((sizeof(Mpi2SCSIIORequest_t
) -
2448 sizeof(Mpi2SGEIOUnion_t
)) + ioc
->sge_size
);
2449 ioc
->max_sges_in_main_message
= max_sge_elements
/ioc
->sge_size
;
2451 /* now do the same for a chain buffer */
2452 max_sge_elements
= ioc
->request_sz
- ioc
->sge_size
;
2453 ioc
->max_sges_in_chain_message
= max_sge_elements
/ioc
->sge_size
;
2455 ioc
->chain_offset_value_for_main_message
=
2456 ((sizeof(Mpi2SCSIIORequest_t
) - sizeof(Mpi2SGEIOUnion_t
)) +
2457 (ioc
->max_sges_in_chain_message
* ioc
->sge_size
)) / 4;
2460 * MPT2SAS_SG_DEPTH = CONFIG_FUSION_MAX_SGE
2462 chains_needed_per_io
= ((ioc
->shost
->sg_tablesize
-
2463 ioc
->max_sges_in_main_message
)/ioc
->max_sges_in_chain_message
)
2465 if (chains_needed_per_io
> facts
->MaxChainDepth
) {
2466 chains_needed_per_io
= facts
->MaxChainDepth
;
2467 ioc
->shost
->sg_tablesize
= min_t(u16
,
2468 ioc
->max_sges_in_main_message
+ (ioc
->max_sges_in_chain_message
2469 * chains_needed_per_io
), ioc
->shost
->sg_tablesize
);
2471 ioc
->chains_needed_per_io
= chains_needed_per_io
;
2473 /* reply free queue sizing - taking into account for 64 FW events */
2474 ioc
->reply_free_queue_depth
= ioc
->hba_queue_depth
+ 64;
2476 /* align the reply post queue on the next 16 count boundary */
2477 if (!ioc
->reply_free_queue_depth
% 16)
2478 ioc
->reply_post_queue_depth
= ioc
->reply_free_queue_depth
+ 16;
2480 ioc
->reply_post_queue_depth
= ioc
->reply_free_queue_depth
+
2481 32 - (ioc
->reply_free_queue_depth
% 16);
2482 if (ioc
->reply_post_queue_depth
>
2483 facts
->MaxReplyDescriptorPostQueueDepth
) {
2484 ioc
->reply_post_queue_depth
= min_t(u16
,
2485 (facts
->MaxReplyDescriptorPostQueueDepth
-
2486 (facts
->MaxReplyDescriptorPostQueueDepth
% 16)),
2487 (ioc
->hba_queue_depth
- (ioc
->hba_queue_depth
% 16)));
2488 ioc
->reply_free_queue_depth
= ioc
->reply_post_queue_depth
- 16;
2489 ioc
->hba_queue_depth
= ioc
->reply_free_queue_depth
- 64;
2493 dinitprintk(ioc
, printk(MPT2SAS_INFO_FMT
"scatter gather: "
2494 "sge_in_main_msg(%d), sge_per_chain(%d), sge_per_io(%d), "
2495 "chains_per_io(%d)\n", ioc
->name
, ioc
->max_sges_in_main_message
,
2496 ioc
->max_sges_in_chain_message
, ioc
->shost
->sg_tablesize
,
2497 ioc
->chains_needed_per_io
));
2499 ioc
->scsiio_depth
= ioc
->hba_queue_depth
-
2500 ioc
->hi_priority_depth
- ioc
->internal_depth
;
2502 /* set the scsi host can_queue depth
2503 * with some internal commands that could be outstanding
2505 ioc
->shost
->can_queue
= ioc
->scsiio_depth
- (2);
2506 dinitprintk(ioc
, printk(MPT2SAS_INFO_FMT
"scsi host: "
2507 "can_queue depth (%d)\n", ioc
->name
, ioc
->shost
->can_queue
));
2509 /* contiguous pool for request and chains, 16 byte align, one extra "
2512 ioc
->chain_depth
= ioc
->chains_needed_per_io
* ioc
->scsiio_depth
;
2513 sz
= ((ioc
->scsiio_depth
+ 1) * ioc
->request_sz
);
2515 /* hi-priority queue */
2516 sz
+= (ioc
->hi_priority_depth
* ioc
->request_sz
);
2518 /* internal queue */
2519 sz
+= (ioc
->internal_depth
* ioc
->request_sz
);
2521 ioc
->request_dma_sz
= sz
;
2522 ioc
->request
= pci_alloc_consistent(ioc
->pdev
, sz
, &ioc
->request_dma
);
2523 if (!ioc
->request
) {
2524 printk(MPT2SAS_ERR_FMT
"request pool: pci_alloc_consistent "
2525 "failed: hba_depth(%d), chains_per_io(%d), frame_sz(%d), "
2526 "total(%d kB)\n", ioc
->name
, ioc
->hba_queue_depth
,
2527 ioc
->chains_needed_per_io
, ioc
->request_sz
, sz
/1024);
2528 if (ioc
->scsiio_depth
< MPT2SAS_SAS_QUEUE_DEPTH
)
2531 ioc
->hba_queue_depth
= max_request_credit
- retry_sz
;
2532 goto retry_allocation
;
2536 printk(MPT2SAS_ERR_FMT
"request pool: pci_alloc_consistent "
2537 "succeed: hba_depth(%d), chains_per_io(%d), frame_sz(%d), "
2538 "total(%d kb)\n", ioc
->name
, ioc
->hba_queue_depth
,
2539 ioc
->chains_needed_per_io
, ioc
->request_sz
, sz
/1024);
2542 /* hi-priority queue */
2543 ioc
->hi_priority
= ioc
->request
+ ((ioc
->scsiio_depth
+ 1) *
2545 ioc
->hi_priority_dma
= ioc
->request_dma
+ ((ioc
->scsiio_depth
+ 1) *
2548 /* internal queue */
2549 ioc
->internal
= ioc
->hi_priority
+ (ioc
->hi_priority_depth
*
2551 ioc
->internal_dma
= ioc
->hi_priority_dma
+ (ioc
->hi_priority_depth
*
2555 dinitprintk(ioc
, printk(MPT2SAS_INFO_FMT
"request pool(0x%p): "
2556 "depth(%d), frame_size(%d), pool_size(%d kB)\n", ioc
->name
,
2557 ioc
->request
, ioc
->hba_queue_depth
, ioc
->request_sz
,
2558 (ioc
->hba_queue_depth
* ioc
->request_sz
)/1024));
2559 dinitprintk(ioc
, printk(MPT2SAS_INFO_FMT
"request pool: dma(0x%llx)\n",
2560 ioc
->name
, (unsigned long long) ioc
->request_dma
));
2563 sz
= ioc
->scsiio_depth
* sizeof(struct scsiio_tracker
);
2564 ioc
->scsi_lookup_pages
= get_order(sz
);
2565 ioc
->scsi_lookup
= (struct scsiio_tracker
*)__get_free_pages(
2566 GFP_KERNEL
, ioc
->scsi_lookup_pages
);
2567 if (!ioc
->scsi_lookup
) {
2568 printk(MPT2SAS_ERR_FMT
"scsi_lookup: get_free_pages failed, "
2569 "sz(%d)\n", ioc
->name
, (int)sz
);
2573 dinitprintk(ioc
, printk(MPT2SAS_INFO_FMT
"scsiio(0x%p): "
2574 "depth(%d)\n", ioc
->name
, ioc
->request
,
2575 ioc
->scsiio_depth
));
2577 ioc
->chain_depth
= min_t(u32
, ioc
->chain_depth
, MAX_CHAIN_DEPTH
);
2578 sz
= ioc
->chain_depth
* sizeof(struct chain_tracker
);
2579 ioc
->chain_pages
= get_order(sz
);
2581 ioc
->chain_lookup
= (struct chain_tracker
*)__get_free_pages(
2582 GFP_KERNEL
, ioc
->chain_pages
);
2583 if (!ioc
->chain_lookup
) {
2584 printk(MPT2SAS_ERR_FMT
"chain_lookup: get_free_pages failed, "
2585 "sz(%d)\n", ioc
->name
, (int)sz
);
2588 ioc
->chain_dma_pool
= pci_pool_create("chain pool", ioc
->pdev
,
2589 ioc
->request_sz
, 16, 0);
2590 if (!ioc
->chain_dma_pool
) {
2591 printk(MPT2SAS_ERR_FMT
"chain_dma_pool: pci_pool_create "
2592 "failed\n", ioc
->name
);
2595 for (i
= 0; i
< ioc
->chain_depth
; i
++) {
2596 ioc
->chain_lookup
[i
].chain_buffer
= pci_pool_alloc(
2597 ioc
->chain_dma_pool
, GFP_KERNEL
,
2598 &ioc
->chain_lookup
[i
].chain_buffer_dma
);
2599 if (!ioc
->chain_lookup
[i
].chain_buffer
) {
2600 ioc
->chain_depth
= i
;
2603 total_sz
+= ioc
->request_sz
;
2606 dinitprintk(ioc
, printk(MPT2SAS_INFO_FMT
"chain pool depth"
2607 "(%d), frame_size(%d), pool_size(%d kB)\n", ioc
->name
,
2608 ioc
->chain_depth
, ioc
->request_sz
, ((ioc
->chain_depth
*
2609 ioc
->request_sz
))/1024));
2611 /* initialize hi-priority queue smid's */
2612 ioc
->hpr_lookup
= kcalloc(ioc
->hi_priority_depth
,
2613 sizeof(struct request_tracker
), GFP_KERNEL
);
2614 if (!ioc
->hpr_lookup
) {
2615 printk(MPT2SAS_ERR_FMT
"hpr_lookup: kcalloc failed\n",
2619 ioc
->hi_priority_smid
= ioc
->scsiio_depth
+ 1;
2620 dinitprintk(ioc
, printk(MPT2SAS_INFO_FMT
"hi_priority(0x%p): "
2621 "depth(%d), start smid(%d)\n", ioc
->name
, ioc
->hi_priority
,
2622 ioc
->hi_priority_depth
, ioc
->hi_priority_smid
));
2624 /* initialize internal queue smid's */
2625 ioc
->internal_lookup
= kcalloc(ioc
->internal_depth
,
2626 sizeof(struct request_tracker
), GFP_KERNEL
);
2627 if (!ioc
->internal_lookup
) {
2628 printk(MPT2SAS_ERR_FMT
"internal_lookup: kcalloc failed\n",
2632 ioc
->internal_smid
= ioc
->hi_priority_smid
+ ioc
->hi_priority_depth
;
2633 dinitprintk(ioc
, printk(MPT2SAS_INFO_FMT
"internal(0x%p): "
2634 "depth(%d), start smid(%d)\n", ioc
->name
, ioc
->internal
,
2635 ioc
->internal_depth
, ioc
->internal_smid
));
2637 /* sense buffers, 4 byte align */
2638 sz
= ioc
->scsiio_depth
* SCSI_SENSE_BUFFERSIZE
;
2639 ioc
->sense_dma_pool
= pci_pool_create("sense pool", ioc
->pdev
, sz
, 4,
2641 if (!ioc
->sense_dma_pool
) {
2642 printk(MPT2SAS_ERR_FMT
"sense pool: pci_pool_create failed\n",
2646 ioc
->sense
= pci_pool_alloc(ioc
->sense_dma_pool
, GFP_KERNEL
,
2649 printk(MPT2SAS_ERR_FMT
"sense pool: pci_pool_alloc failed\n",
2653 dinitprintk(ioc
, printk(MPT2SAS_INFO_FMT
2654 "sense pool(0x%p): depth(%d), element_size(%d), pool_size"
2655 "(%d kB)\n", ioc
->name
, ioc
->sense
, ioc
->scsiio_depth
,
2656 SCSI_SENSE_BUFFERSIZE
, sz
/1024));
2657 dinitprintk(ioc
, printk(MPT2SAS_INFO_FMT
"sense_dma(0x%llx)\n",
2658 ioc
->name
, (unsigned long long)ioc
->sense_dma
));
2661 /* reply pool, 4 byte align */
2662 sz
= ioc
->reply_free_queue_depth
* ioc
->reply_sz
;
2663 ioc
->reply_dma_pool
= pci_pool_create("reply pool", ioc
->pdev
, sz
, 4,
2665 if (!ioc
->reply_dma_pool
) {
2666 printk(MPT2SAS_ERR_FMT
"reply pool: pci_pool_create failed\n",
2670 ioc
->reply
= pci_pool_alloc(ioc
->reply_dma_pool
, GFP_KERNEL
,
2673 printk(MPT2SAS_ERR_FMT
"reply pool: pci_pool_alloc failed\n",
2677 ioc
->reply_dma_min_address
= (u32
)(ioc
->reply_dma
);
2678 ioc
->reply_dma_max_address
= (u32
)(ioc
->reply_dma
) + sz
;
2679 dinitprintk(ioc
, printk(MPT2SAS_INFO_FMT
"reply pool(0x%p): depth"
2680 "(%d), frame_size(%d), pool_size(%d kB)\n", ioc
->name
, ioc
->reply
,
2681 ioc
->reply_free_queue_depth
, ioc
->reply_sz
, sz
/1024));
2682 dinitprintk(ioc
, printk(MPT2SAS_INFO_FMT
"reply_dma(0x%llx)\n",
2683 ioc
->name
, (unsigned long long)ioc
->reply_dma
));
2686 /* reply free queue, 16 byte align */
2687 sz
= ioc
->reply_free_queue_depth
* 4;
2688 ioc
->reply_free_dma_pool
= pci_pool_create("reply_free pool",
2689 ioc
->pdev
, sz
, 16, 0);
2690 if (!ioc
->reply_free_dma_pool
) {
2691 printk(MPT2SAS_ERR_FMT
"reply_free pool: pci_pool_create "
2692 "failed\n", ioc
->name
);
2695 ioc
->reply_free
= pci_pool_alloc(ioc
->reply_free_dma_pool
, GFP_KERNEL
,
2696 &ioc
->reply_free_dma
);
2697 if (!ioc
->reply_free
) {
2698 printk(MPT2SAS_ERR_FMT
"reply_free pool: pci_pool_alloc "
2699 "failed\n", ioc
->name
);
2702 memset(ioc
->reply_free
, 0, sz
);
2703 dinitprintk(ioc
, printk(MPT2SAS_INFO_FMT
"reply_free pool(0x%p): "
2704 "depth(%d), element_size(%d), pool_size(%d kB)\n", ioc
->name
,
2705 ioc
->reply_free
, ioc
->reply_free_queue_depth
, 4, sz
/1024));
2706 dinitprintk(ioc
, printk(MPT2SAS_INFO_FMT
"reply_free_dma"
2707 "(0x%llx)\n", ioc
->name
, (unsigned long long)ioc
->reply_free_dma
));
2710 /* reply post queue, 16 byte align */
2711 reply_post_free_sz
= ioc
->reply_post_queue_depth
*
2712 sizeof(Mpi2DefaultReplyDescriptor_t
);
2713 if (_base_is_controller_msix_enabled(ioc
))
2714 sz
= reply_post_free_sz
* ioc
->reply_queue_count
;
2716 sz
= reply_post_free_sz
;
2717 ioc
->reply_post_free_dma_pool
= pci_pool_create("reply_post_free pool",
2718 ioc
->pdev
, sz
, 16, 0);
2719 if (!ioc
->reply_post_free_dma_pool
) {
2720 printk(MPT2SAS_ERR_FMT
"reply_post_free pool: pci_pool_create "
2721 "failed\n", ioc
->name
);
2724 ioc
->reply_post_free
= pci_pool_alloc(ioc
->reply_post_free_dma_pool
,
2725 GFP_KERNEL
, &ioc
->reply_post_free_dma
);
2726 if (!ioc
->reply_post_free
) {
2727 printk(MPT2SAS_ERR_FMT
"reply_post_free pool: pci_pool_alloc "
2728 "failed\n", ioc
->name
);
2731 memset(ioc
->reply_post_free
, 0, sz
);
2732 dinitprintk(ioc
, printk(MPT2SAS_INFO_FMT
"reply post free pool"
2733 "(0x%p): depth(%d), element_size(%d), pool_size(%d kB)\n",
2734 ioc
->name
, ioc
->reply_post_free
, ioc
->reply_post_queue_depth
, 8,
2736 dinitprintk(ioc
, printk(MPT2SAS_INFO_FMT
"reply_post_free_dma = "
2737 "(0x%llx)\n", ioc
->name
, (unsigned long long)
2738 ioc
->reply_post_free_dma
));
2741 ioc
->config_page_sz
= 512;
2742 ioc
->config_page
= pci_alloc_consistent(ioc
->pdev
,
2743 ioc
->config_page_sz
, &ioc
->config_page_dma
);
2744 if (!ioc
->config_page
) {
2745 printk(MPT2SAS_ERR_FMT
"config page: pci_pool_alloc "
2746 "failed\n", ioc
->name
);
2749 dinitprintk(ioc
, printk(MPT2SAS_INFO_FMT
"config page(0x%p): size"
2750 "(%d)\n", ioc
->name
, ioc
->config_page
, ioc
->config_page_sz
));
2751 dinitprintk(ioc
, printk(MPT2SAS_INFO_FMT
"config_page_dma"
2752 "(0x%llx)\n", ioc
->name
, (unsigned long long)ioc
->config_page_dma
));
2753 total_sz
+= ioc
->config_page_sz
;
2755 printk(MPT2SAS_INFO_FMT
"Allocated physical memory: size(%d kB)\n",
2756 ioc
->name
, total_sz
/1024);
2757 printk(MPT2SAS_INFO_FMT
"Current Controller Queue Depth(%d), "
2758 "Max Controller Queue Depth(%d)\n",
2759 ioc
->name
, ioc
->shost
->can_queue
, facts
->RequestCredit
);
2760 printk(MPT2SAS_INFO_FMT
"Scatter Gather Elements per IO(%d)\n",
2761 ioc
->name
, ioc
->shost
->sg_tablesize
);
2770 * mpt2sas_base_get_iocstate - Get the current state of a MPT adapter.
2771 * @ioc: Pointer to MPT_ADAPTER structure
2772 * @cooked: Request raw or cooked IOC state
2774 * Returns all IOC Doorbell register bits if cooked==0, else just the
2775 * Doorbell bits in MPI_IOC_STATE_MASK.
2778 mpt2sas_base_get_iocstate(struct MPT2SAS_ADAPTER
*ioc
, int cooked
)
2782 s
= readl(&ioc
->chip
->Doorbell
);
2783 sc
= s
& MPI2_IOC_STATE_MASK
;
2784 return cooked
? sc
: s
;
2788 * _base_wait_on_iocstate - waiting on a particular ioc state
2789 * @ioc_state: controller state { READY, OPERATIONAL, or RESET }
2790 * @timeout: timeout in second
2791 * @sleep_flag: CAN_SLEEP or NO_SLEEP
2793 * Returns 0 for success, non-zero for failure.
2796 _base_wait_on_iocstate(struct MPT2SAS_ADAPTER
*ioc
, u32 ioc_state
, int timeout
,
2803 cntdn
= (sleep_flag
== CAN_SLEEP
) ? 1000*timeout
: 2000*timeout
;
2805 current_state
= mpt2sas_base_get_iocstate(ioc
, 1);
2806 if (current_state
== ioc_state
)
2808 if (count
&& current_state
== MPI2_IOC_STATE_FAULT
)
2810 if (sleep_flag
== CAN_SLEEP
)
2817 return current_state
;
2821 * _base_wait_for_doorbell_int - waiting for controller interrupt(generated by
2822 * a write to the doorbell)
2823 * @ioc: per adapter object
2824 * @timeout: timeout in second
2825 * @sleep_flag: CAN_SLEEP or NO_SLEEP
2827 * Returns 0 for success, non-zero for failure.
2829 * Notes: MPI2_HIS_IOC2SYS_DB_STATUS - set to one when IOC writes to doorbell.
2832 _base_wait_for_doorbell_int(struct MPT2SAS_ADAPTER
*ioc
, int timeout
,
2839 cntdn
= (sleep_flag
== CAN_SLEEP
) ? 1000*timeout
: 2000*timeout
;
2841 int_status
= readl(&ioc
->chip
->HostInterruptStatus
);
2842 if (int_status
& MPI2_HIS_IOC2SYS_DB_STATUS
) {
2843 dhsprintk(ioc
, printk(MPT2SAS_INFO_FMT
"%s: "
2844 "successful count(%d), timeout(%d)\n", ioc
->name
,
2845 __func__
, count
, timeout
));
2848 if (sleep_flag
== CAN_SLEEP
)
2855 printk(MPT2SAS_ERR_FMT
"%s: failed due to timeout count(%d), "
2856 "int_status(%x)!\n", ioc
->name
, __func__
, count
, int_status
);
2861 * _base_wait_for_doorbell_ack - waiting for controller to read the doorbell.
2862 * @ioc: per adapter object
2863 * @timeout: timeout in second
2864 * @sleep_flag: CAN_SLEEP or NO_SLEEP
2866 * Returns 0 for success, non-zero for failure.
2868 * Notes: MPI2_HIS_SYS2IOC_DB_STATUS - set to one when host writes to
2872 _base_wait_for_doorbell_ack(struct MPT2SAS_ADAPTER
*ioc
, int timeout
,
2880 cntdn
= (sleep_flag
== CAN_SLEEP
) ? 1000*timeout
: 2000*timeout
;
2882 int_status
= readl(&ioc
->chip
->HostInterruptStatus
);
2883 if (!(int_status
& MPI2_HIS_SYS2IOC_DB_STATUS
)) {
2884 dhsprintk(ioc
, printk(MPT2SAS_INFO_FMT
"%s: "
2885 "successful count(%d), timeout(%d)\n", ioc
->name
,
2886 __func__
, count
, timeout
));
2888 } else if (int_status
& MPI2_HIS_IOC2SYS_DB_STATUS
) {
2889 doorbell
= readl(&ioc
->chip
->Doorbell
);
2890 if ((doorbell
& MPI2_IOC_STATE_MASK
) ==
2891 MPI2_IOC_STATE_FAULT
) {
2892 mpt2sas_base_fault_info(ioc
, doorbell
);
2895 } else if (int_status
== 0xFFFFFFFF)
2898 if (sleep_flag
== CAN_SLEEP
)
2906 printk(MPT2SAS_ERR_FMT
"%s: failed due to timeout count(%d), "
2907 "int_status(%x)!\n", ioc
->name
, __func__
, count
, int_status
);
2912 * _base_wait_for_doorbell_not_used - waiting for doorbell to not be in use
2913 * @ioc: per adapter object
2914 * @timeout: timeout in second
2915 * @sleep_flag: CAN_SLEEP or NO_SLEEP
2917 * Returns 0 for success, non-zero for failure.
2921 _base_wait_for_doorbell_not_used(struct MPT2SAS_ADAPTER
*ioc
, int timeout
,
2928 cntdn
= (sleep_flag
== CAN_SLEEP
) ? 1000*timeout
: 2000*timeout
;
2930 doorbell_reg
= readl(&ioc
->chip
->Doorbell
);
2931 if (!(doorbell_reg
& MPI2_DOORBELL_USED
)) {
2932 dhsprintk(ioc
, printk(MPT2SAS_INFO_FMT
"%s: "
2933 "successful count(%d), timeout(%d)\n", ioc
->name
,
2934 __func__
, count
, timeout
));
2937 if (sleep_flag
== CAN_SLEEP
)
2944 printk(MPT2SAS_ERR_FMT
"%s: failed due to timeout count(%d), "
2945 "doorbell_reg(%x)!\n", ioc
->name
, __func__
, count
, doorbell_reg
);
2950 * _base_send_ioc_reset - send doorbell reset
2951 * @ioc: per adapter object
2952 * @reset_type: currently only supports: MPI2_FUNCTION_IOC_MESSAGE_UNIT_RESET
2953 * @timeout: timeout in second
2954 * @sleep_flag: CAN_SLEEP or NO_SLEEP
2956 * Returns 0 for success, non-zero for failure.
2959 _base_send_ioc_reset(struct MPT2SAS_ADAPTER
*ioc
, u8 reset_type
, int timeout
,
2965 if (reset_type
!= MPI2_FUNCTION_IOC_MESSAGE_UNIT_RESET
) {
2966 printk(MPT2SAS_ERR_FMT
"%s: unknown reset_type\n",
2967 ioc
->name
, __func__
);
2971 if (!(ioc
->facts
.IOCCapabilities
&
2972 MPI2_IOCFACTS_CAPABILITY_EVENT_REPLAY
))
2975 printk(MPT2SAS_INFO_FMT
"sending message unit reset !!\n", ioc
->name
);
2977 writel(reset_type
<< MPI2_DOORBELL_FUNCTION_SHIFT
,
2978 &ioc
->chip
->Doorbell
);
2979 if ((_base_wait_for_doorbell_ack(ioc
, 15, sleep_flag
))) {
2983 ioc_state
= _base_wait_on_iocstate(ioc
, MPI2_IOC_STATE_READY
,
2984 timeout
, sleep_flag
);
2986 printk(MPT2SAS_ERR_FMT
"%s: failed going to ready state "
2987 " (ioc_state=0x%x)\n", ioc
->name
, __func__
, ioc_state
);
2992 printk(MPT2SAS_INFO_FMT
"message unit reset: %s\n",
2993 ioc
->name
, ((r
== 0) ? "SUCCESS" : "FAILED"));
2998 * _base_handshake_req_reply_wait - send request thru doorbell interface
2999 * @ioc: per adapter object
3000 * @request_bytes: request length
3001 * @request: pointer having request payload
3002 * @reply_bytes: reply length
3003 * @reply: pointer to reply payload
3004 * @timeout: timeout in second
3005 * @sleep_flag: CAN_SLEEP or NO_SLEEP
3007 * Returns 0 for success, non-zero for failure.
3010 _base_handshake_req_reply_wait(struct MPT2SAS_ADAPTER
*ioc
, int request_bytes
,
3011 u32
*request
, int reply_bytes
, u16
*reply
, int timeout
, int sleep_flag
)
3013 MPI2DefaultReply_t
*default_reply
= (MPI2DefaultReply_t
*)reply
;
3019 /* make sure doorbell is not in use */
3020 if ((readl(&ioc
->chip
->Doorbell
) & MPI2_DOORBELL_USED
)) {
3021 printk(MPT2SAS_ERR_FMT
"doorbell is in use "
3022 " (line=%d)\n", ioc
->name
, __LINE__
);
3026 /* clear pending doorbell interrupts from previous state changes */
3027 if (readl(&ioc
->chip
->HostInterruptStatus
) &
3028 MPI2_HIS_IOC2SYS_DB_STATUS
)
3029 writel(0, &ioc
->chip
->HostInterruptStatus
);
3031 /* send message to ioc */
3032 writel(((MPI2_FUNCTION_HANDSHAKE
<<MPI2_DOORBELL_FUNCTION_SHIFT
) |
3033 ((request_bytes
/4)<<MPI2_DOORBELL_ADD_DWORDS_SHIFT
)),
3034 &ioc
->chip
->Doorbell
);
3036 if ((_base_wait_for_doorbell_int(ioc
, 5, NO_SLEEP
))) {
3037 printk(MPT2SAS_ERR_FMT
"doorbell handshake "
3038 "int failed (line=%d)\n", ioc
->name
, __LINE__
);
3041 writel(0, &ioc
->chip
->HostInterruptStatus
);
3043 if ((_base_wait_for_doorbell_ack(ioc
, 5, sleep_flag
))) {
3044 printk(MPT2SAS_ERR_FMT
"doorbell handshake "
3045 "ack failed (line=%d)\n", ioc
->name
, __LINE__
);
3049 /* send message 32-bits at a time */
3050 for (i
= 0, failed
= 0; i
< request_bytes
/4 && !failed
; i
++) {
3051 writel(cpu_to_le32(request
[i
]), &ioc
->chip
->Doorbell
);
3052 if ((_base_wait_for_doorbell_ack(ioc
, 5, sleep_flag
)))
3057 printk(MPT2SAS_ERR_FMT
"doorbell handshake "
3058 "sending request failed (line=%d)\n", ioc
->name
, __LINE__
);
3062 /* now wait for the reply */
3063 if ((_base_wait_for_doorbell_int(ioc
, timeout
, sleep_flag
))) {
3064 printk(MPT2SAS_ERR_FMT
"doorbell handshake "
3065 "int failed (line=%d)\n", ioc
->name
, __LINE__
);
3069 /* read the first two 16-bits, it gives the total length of the reply */
3070 reply
[0] = le16_to_cpu(readl(&ioc
->chip
->Doorbell
)
3071 & MPI2_DOORBELL_DATA_MASK
);
3072 writel(0, &ioc
->chip
->HostInterruptStatus
);
3073 if ((_base_wait_for_doorbell_int(ioc
, 5, sleep_flag
))) {
3074 printk(MPT2SAS_ERR_FMT
"doorbell handshake "
3075 "int failed (line=%d)\n", ioc
->name
, __LINE__
);
3078 reply
[1] = le16_to_cpu(readl(&ioc
->chip
->Doorbell
)
3079 & MPI2_DOORBELL_DATA_MASK
);
3080 writel(0, &ioc
->chip
->HostInterruptStatus
);
3082 for (i
= 2; i
< default_reply
->MsgLength
* 2; i
++) {
3083 if ((_base_wait_for_doorbell_int(ioc
, 5, sleep_flag
))) {
3084 printk(MPT2SAS_ERR_FMT
"doorbell "
3085 "handshake int failed (line=%d)\n", ioc
->name
,
3089 if (i
>= reply_bytes
/2) /* overflow case */
3090 dummy
= readl(&ioc
->chip
->Doorbell
);
3092 reply
[i
] = le16_to_cpu(readl(&ioc
->chip
->Doorbell
)
3093 & MPI2_DOORBELL_DATA_MASK
);
3094 writel(0, &ioc
->chip
->HostInterruptStatus
);
3097 _base_wait_for_doorbell_int(ioc
, 5, sleep_flag
);
3098 if (_base_wait_for_doorbell_not_used(ioc
, 5, sleep_flag
) != 0) {
3099 dhsprintk(ioc
, printk(MPT2SAS_INFO_FMT
"doorbell is in use "
3100 " (line=%d)\n", ioc
->name
, __LINE__
));
3102 writel(0, &ioc
->chip
->HostInterruptStatus
);
3104 if (ioc
->logging_level
& MPT_DEBUG_INIT
) {
3105 mfp
= (__le32
*)reply
;
3106 printk(KERN_INFO
"\toffset:data\n");
3107 for (i
= 0; i
< reply_bytes
/4; i
++)
3108 printk(KERN_INFO
"\t[0x%02x]:%08x\n", i
*4,
3109 le32_to_cpu(mfp
[i
]));
3115 * mpt2sas_base_sas_iounit_control - send sas iounit control to FW
3116 * @ioc: per adapter object
3117 * @mpi_reply: the reply payload from FW
3118 * @mpi_request: the request payload sent to FW
3120 * The SAS IO Unit Control Request message allows the host to perform low-level
3121 * operations, such as resets on the PHYs of the IO Unit, also allows the host
3122 * to obtain the IOC assigned device handles for a device if it has other
3123 * identifying information about the device, in addition allows the host to
3124 * remove IOC resources associated with the device.
3126 * Returns 0 for success, non-zero for failure.
3129 mpt2sas_base_sas_iounit_control(struct MPT2SAS_ADAPTER
*ioc
,
3130 Mpi2SasIoUnitControlReply_t
*mpi_reply
,
3131 Mpi2SasIoUnitControlRequest_t
*mpi_request
)
3135 unsigned long timeleft
;
3139 u16 wait_state_count
;
3141 dinitprintk(ioc
, printk(MPT2SAS_INFO_FMT
"%s\n", ioc
->name
,
3144 mutex_lock(&ioc
->base_cmds
.mutex
);
3146 if (ioc
->base_cmds
.status
!= MPT2_CMD_NOT_USED
) {
3147 printk(MPT2SAS_ERR_FMT
"%s: base_cmd in use\n",
3148 ioc
->name
, __func__
);
3153 wait_state_count
= 0;
3154 ioc_state
= mpt2sas_base_get_iocstate(ioc
, 1);
3155 while (ioc_state
!= MPI2_IOC_STATE_OPERATIONAL
) {
3156 if (wait_state_count
++ == 10) {
3157 printk(MPT2SAS_ERR_FMT
3158 "%s: failed due to ioc not operational\n",
3159 ioc
->name
, __func__
);
3164 ioc_state
= mpt2sas_base_get_iocstate(ioc
, 1);
3165 printk(MPT2SAS_INFO_FMT
"%s: waiting for "
3166 "operational state(count=%d)\n", ioc
->name
,
3167 __func__
, wait_state_count
);
3170 smid
= mpt2sas_base_get_smid(ioc
, ioc
->base_cb_idx
);
3172 printk(MPT2SAS_ERR_FMT
"%s: failed obtaining a smid\n",
3173 ioc
->name
, __func__
);
3179 ioc
->base_cmds
.status
= MPT2_CMD_PENDING
;
3180 request
= mpt2sas_base_get_msg_frame(ioc
, smid
);
3181 ioc
->base_cmds
.smid
= smid
;
3182 memcpy(request
, mpi_request
, sizeof(Mpi2SasIoUnitControlRequest_t
));
3183 if (mpi_request
->Operation
== MPI2_SAS_OP_PHY_HARD_RESET
||
3184 mpi_request
->Operation
== MPI2_SAS_OP_PHY_LINK_RESET
)
3185 ioc
->ioc_link_reset_in_progress
= 1;
3186 init_completion(&ioc
->base_cmds
.done
);
3187 mpt2sas_base_put_smid_default(ioc
, smid
);
3188 timeleft
= wait_for_completion_timeout(&ioc
->base_cmds
.done
,
3189 msecs_to_jiffies(10000));
3190 if ((mpi_request
->Operation
== MPI2_SAS_OP_PHY_HARD_RESET
||
3191 mpi_request
->Operation
== MPI2_SAS_OP_PHY_LINK_RESET
) &&
3192 ioc
->ioc_link_reset_in_progress
)
3193 ioc
->ioc_link_reset_in_progress
= 0;
3194 if (!(ioc
->base_cmds
.status
& MPT2_CMD_COMPLETE
)) {
3195 printk(MPT2SAS_ERR_FMT
"%s: timeout\n",
3196 ioc
->name
, __func__
);
3197 _debug_dump_mf(mpi_request
,
3198 sizeof(Mpi2SasIoUnitControlRequest_t
)/4);
3199 if (!(ioc
->base_cmds
.status
& MPT2_CMD_RESET
))
3201 goto issue_host_reset
;
3203 if (ioc
->base_cmds
.status
& MPT2_CMD_REPLY_VALID
)
3204 memcpy(mpi_reply
, ioc
->base_cmds
.reply
,
3205 sizeof(Mpi2SasIoUnitControlReply_t
));
3207 memset(mpi_reply
, 0, sizeof(Mpi2SasIoUnitControlReply_t
));
3208 ioc
->base_cmds
.status
= MPT2_CMD_NOT_USED
;
3213 mpt2sas_base_hard_reset_handler(ioc
, CAN_SLEEP
,
3215 ioc
->base_cmds
.status
= MPT2_CMD_NOT_USED
;
3218 mutex_unlock(&ioc
->base_cmds
.mutex
);
3224 * mpt2sas_base_scsi_enclosure_processor - sending request to sep device
3225 * @ioc: per adapter object
3226 * @mpi_reply: the reply payload from FW
3227 * @mpi_request: the request payload sent to FW
3229 * The SCSI Enclosure Processor request message causes the IOC to
3230 * communicate with SES devices to control LED status signals.
3232 * Returns 0 for success, non-zero for failure.
3235 mpt2sas_base_scsi_enclosure_processor(struct MPT2SAS_ADAPTER
*ioc
,
3236 Mpi2SepReply_t
*mpi_reply
, Mpi2SepRequest_t
*mpi_request
)
3240 unsigned long timeleft
;
3244 u16 wait_state_count
;
3246 dinitprintk(ioc
, printk(MPT2SAS_INFO_FMT
"%s\n", ioc
->name
,
3249 mutex_lock(&ioc
->base_cmds
.mutex
);
3251 if (ioc
->base_cmds
.status
!= MPT2_CMD_NOT_USED
) {
3252 printk(MPT2SAS_ERR_FMT
"%s: base_cmd in use\n",
3253 ioc
->name
, __func__
);
3258 wait_state_count
= 0;
3259 ioc_state
= mpt2sas_base_get_iocstate(ioc
, 1);
3260 while (ioc_state
!= MPI2_IOC_STATE_OPERATIONAL
) {
3261 if (wait_state_count
++ == 10) {
3262 printk(MPT2SAS_ERR_FMT
3263 "%s: failed due to ioc not operational\n",
3264 ioc
->name
, __func__
);
3269 ioc_state
= mpt2sas_base_get_iocstate(ioc
, 1);
3270 printk(MPT2SAS_INFO_FMT
"%s: waiting for "
3271 "operational state(count=%d)\n", ioc
->name
,
3272 __func__
, wait_state_count
);
3275 smid
= mpt2sas_base_get_smid(ioc
, ioc
->base_cb_idx
);
3277 printk(MPT2SAS_ERR_FMT
"%s: failed obtaining a smid\n",
3278 ioc
->name
, __func__
);
3284 ioc
->base_cmds
.status
= MPT2_CMD_PENDING
;
3285 request
= mpt2sas_base_get_msg_frame(ioc
, smid
);
3286 ioc
->base_cmds
.smid
= smid
;
3287 memcpy(request
, mpi_request
, sizeof(Mpi2SepReply_t
));
3288 init_completion(&ioc
->base_cmds
.done
);
3289 mpt2sas_base_put_smid_default(ioc
, smid
);
3290 timeleft
= wait_for_completion_timeout(&ioc
->base_cmds
.done
,
3291 msecs_to_jiffies(10000));
3292 if (!(ioc
->base_cmds
.status
& MPT2_CMD_COMPLETE
)) {
3293 printk(MPT2SAS_ERR_FMT
"%s: timeout\n",
3294 ioc
->name
, __func__
);
3295 _debug_dump_mf(mpi_request
,
3296 sizeof(Mpi2SepRequest_t
)/4);
3297 if (!(ioc
->base_cmds
.status
& MPT2_CMD_RESET
))
3299 goto issue_host_reset
;
3301 if (ioc
->base_cmds
.status
& MPT2_CMD_REPLY_VALID
)
3302 memcpy(mpi_reply
, ioc
->base_cmds
.reply
,
3303 sizeof(Mpi2SepReply_t
));
3305 memset(mpi_reply
, 0, sizeof(Mpi2SepReply_t
));
3306 ioc
->base_cmds
.status
= MPT2_CMD_NOT_USED
;
3311 mpt2sas_base_hard_reset_handler(ioc
, CAN_SLEEP
,
3313 ioc
->base_cmds
.status
= MPT2_CMD_NOT_USED
;
3316 mutex_unlock(&ioc
->base_cmds
.mutex
);
3321 * _base_get_port_facts - obtain port facts reply and save in ioc
3322 * @ioc: per adapter object
3323 * @sleep_flag: CAN_SLEEP or NO_SLEEP
3325 * Returns 0 for success, non-zero for failure.
3328 _base_get_port_facts(struct MPT2SAS_ADAPTER
*ioc
, int port
, int sleep_flag
)
3330 Mpi2PortFactsRequest_t mpi_request
;
3331 Mpi2PortFactsReply_t mpi_reply
;
3332 struct mpt2sas_port_facts
*pfacts
;
3333 int mpi_reply_sz
, mpi_request_sz
, r
;
3335 dinitprintk(ioc
, printk(MPT2SAS_INFO_FMT
"%s\n", ioc
->name
,
3338 mpi_reply_sz
= sizeof(Mpi2PortFactsReply_t
);
3339 mpi_request_sz
= sizeof(Mpi2PortFactsRequest_t
);
3340 memset(&mpi_request
, 0, mpi_request_sz
);
3341 mpi_request
.Function
= MPI2_FUNCTION_PORT_FACTS
;
3342 mpi_request
.PortNumber
= port
;
3343 r
= _base_handshake_req_reply_wait(ioc
, mpi_request_sz
,
3344 (u32
*)&mpi_request
, mpi_reply_sz
, (u16
*)&mpi_reply
, 5, CAN_SLEEP
);
3347 printk(MPT2SAS_ERR_FMT
"%s: handshake failed (r=%d)\n",
3348 ioc
->name
, __func__
, r
);
3352 pfacts
= &ioc
->pfacts
[port
];
3353 memset(pfacts
, 0, sizeof(struct mpt2sas_port_facts
));
3354 pfacts
->PortNumber
= mpi_reply
.PortNumber
;
3355 pfacts
->VP_ID
= mpi_reply
.VP_ID
;
3356 pfacts
->VF_ID
= mpi_reply
.VF_ID
;
3357 pfacts
->MaxPostedCmdBuffers
=
3358 le16_to_cpu(mpi_reply
.MaxPostedCmdBuffers
);
3364 * _base_get_ioc_facts - obtain ioc facts reply and save in ioc
3365 * @ioc: per adapter object
3366 * @sleep_flag: CAN_SLEEP or NO_SLEEP
3368 * Returns 0 for success, non-zero for failure.
3371 _base_get_ioc_facts(struct MPT2SAS_ADAPTER
*ioc
, int sleep_flag
)
3373 Mpi2IOCFactsRequest_t mpi_request
;
3374 Mpi2IOCFactsReply_t mpi_reply
;
3375 struct mpt2sas_facts
*facts
;
3376 int mpi_reply_sz
, mpi_request_sz
, r
;
3378 dinitprintk(ioc
, printk(MPT2SAS_INFO_FMT
"%s\n", ioc
->name
,
3381 mpi_reply_sz
= sizeof(Mpi2IOCFactsReply_t
);
3382 mpi_request_sz
= sizeof(Mpi2IOCFactsRequest_t
);
3383 memset(&mpi_request
, 0, mpi_request_sz
);
3384 mpi_request
.Function
= MPI2_FUNCTION_IOC_FACTS
;
3385 r
= _base_handshake_req_reply_wait(ioc
, mpi_request_sz
,
3386 (u32
*)&mpi_request
, mpi_reply_sz
, (u16
*)&mpi_reply
, 5, CAN_SLEEP
);
3389 printk(MPT2SAS_ERR_FMT
"%s: handshake failed (r=%d)\n",
3390 ioc
->name
, __func__
, r
);
3394 facts
= &ioc
->facts
;
3395 memset(facts
, 0, sizeof(struct mpt2sas_facts
));
3396 facts
->MsgVersion
= le16_to_cpu(mpi_reply
.MsgVersion
);
3397 facts
->HeaderVersion
= le16_to_cpu(mpi_reply
.HeaderVersion
);
3398 facts
->VP_ID
= mpi_reply
.VP_ID
;
3399 facts
->VF_ID
= mpi_reply
.VF_ID
;
3400 facts
->IOCExceptions
= le16_to_cpu(mpi_reply
.IOCExceptions
);
3401 facts
->MaxChainDepth
= mpi_reply
.MaxChainDepth
;
3402 facts
->WhoInit
= mpi_reply
.WhoInit
;
3403 facts
->NumberOfPorts
= mpi_reply
.NumberOfPorts
;
3404 facts
->MaxMSIxVectors
= mpi_reply
.MaxMSIxVectors
;
3405 facts
->RequestCredit
= le16_to_cpu(mpi_reply
.RequestCredit
);
3406 facts
->MaxReplyDescriptorPostQueueDepth
=
3407 le16_to_cpu(mpi_reply
.MaxReplyDescriptorPostQueueDepth
);
3408 facts
->ProductID
= le16_to_cpu(mpi_reply
.ProductID
);
3409 facts
->IOCCapabilities
= le32_to_cpu(mpi_reply
.IOCCapabilities
);
3410 if ((facts
->IOCCapabilities
& MPI2_IOCFACTS_CAPABILITY_INTEGRATED_RAID
))
3411 ioc
->ir_firmware
= 1;
3412 facts
->FWVersion
.Word
= le32_to_cpu(mpi_reply
.FWVersion
.Word
);
3413 facts
->IOCRequestFrameSize
=
3414 le16_to_cpu(mpi_reply
.IOCRequestFrameSize
);
3415 facts
->MaxInitiators
= le16_to_cpu(mpi_reply
.MaxInitiators
);
3416 facts
->MaxTargets
= le16_to_cpu(mpi_reply
.MaxTargets
);
3417 ioc
->shost
->max_id
= -1;
3418 facts
->MaxSasExpanders
= le16_to_cpu(mpi_reply
.MaxSasExpanders
);
3419 facts
->MaxEnclosures
= le16_to_cpu(mpi_reply
.MaxEnclosures
);
3420 facts
->ProtocolFlags
= le16_to_cpu(mpi_reply
.ProtocolFlags
);
3421 facts
->HighPriorityCredit
=
3422 le16_to_cpu(mpi_reply
.HighPriorityCredit
);
3423 facts
->ReplyFrameSize
= mpi_reply
.ReplyFrameSize
;
3424 facts
->MaxDevHandle
= le16_to_cpu(mpi_reply
.MaxDevHandle
);
3426 dinitprintk(ioc
, printk(MPT2SAS_INFO_FMT
"hba queue depth(%d), "
3427 "max chains per io(%d)\n", ioc
->name
, facts
->RequestCredit
,
3428 facts
->MaxChainDepth
));
3429 dinitprintk(ioc
, printk(MPT2SAS_INFO_FMT
"request frame size(%d), "
3430 "reply frame size(%d)\n", ioc
->name
,
3431 facts
->IOCRequestFrameSize
* 4, facts
->ReplyFrameSize
* 4));
3436 * _base_send_ioc_init - send ioc_init to firmware
3437 * @ioc: per adapter object
3438 * @sleep_flag: CAN_SLEEP or NO_SLEEP
3440 * Returns 0 for success, non-zero for failure.
3443 _base_send_ioc_init(struct MPT2SAS_ADAPTER
*ioc
, int sleep_flag
)
3445 Mpi2IOCInitRequest_t mpi_request
;
3446 Mpi2IOCInitReply_t mpi_reply
;
3448 struct timeval current_time
;
3451 dinitprintk(ioc
, printk(MPT2SAS_INFO_FMT
"%s\n", ioc
->name
,
3454 memset(&mpi_request
, 0, sizeof(Mpi2IOCInitRequest_t
));
3455 mpi_request
.Function
= MPI2_FUNCTION_IOC_INIT
;
3456 mpi_request
.WhoInit
= MPI2_WHOINIT_HOST_DRIVER
;
3457 mpi_request
.VF_ID
= 0; /* TODO */
3458 mpi_request
.VP_ID
= 0;
3459 mpi_request
.MsgVersion
= cpu_to_le16(MPI2_VERSION
);
3460 mpi_request
.HeaderVersion
= cpu_to_le16(MPI2_HEADER_VERSION
);
3462 if (_base_is_controller_msix_enabled(ioc
))
3463 mpi_request
.HostMSIxVectors
= ioc
->reply_queue_count
;
3464 mpi_request
.SystemRequestFrameSize
= cpu_to_le16(ioc
->request_sz
/4);
3465 mpi_request
.ReplyDescriptorPostQueueDepth
=
3466 cpu_to_le16(ioc
->reply_post_queue_depth
);
3467 mpi_request
.ReplyFreeQueueDepth
=
3468 cpu_to_le16(ioc
->reply_free_queue_depth
);
3470 mpi_request
.SenseBufferAddressHigh
=
3471 cpu_to_le32((u64
)ioc
->sense_dma
>> 32);
3472 mpi_request
.SystemReplyAddressHigh
=
3473 cpu_to_le32((u64
)ioc
->reply_dma
>> 32);
3474 mpi_request
.SystemRequestFrameBaseAddress
=
3475 cpu_to_le64((u64
)ioc
->request_dma
);
3476 mpi_request
.ReplyFreeQueueAddress
=
3477 cpu_to_le64((u64
)ioc
->reply_free_dma
);
3478 mpi_request
.ReplyDescriptorPostQueueAddress
=
3479 cpu_to_le64((u64
)ioc
->reply_post_free_dma
);
3482 /* This time stamp specifies number of milliseconds
3483 * since epoch ~ midnight January 1, 1970.
3485 do_gettimeofday(¤t_time
);
3486 mpi_request
.TimeStamp
= cpu_to_le64((u64
)current_time
.tv_sec
* 1000 +
3487 (current_time
.tv_usec
/ 1000));
3489 if (ioc
->logging_level
& MPT_DEBUG_INIT
) {
3493 mfp
= (__le32
*)&mpi_request
;
3494 printk(KERN_INFO
"\toffset:data\n");
3495 for (i
= 0; i
< sizeof(Mpi2IOCInitRequest_t
)/4; i
++)
3496 printk(KERN_INFO
"\t[0x%02x]:%08x\n", i
*4,
3497 le32_to_cpu(mfp
[i
]));
3500 r
= _base_handshake_req_reply_wait(ioc
,
3501 sizeof(Mpi2IOCInitRequest_t
), (u32
*)&mpi_request
,
3502 sizeof(Mpi2IOCInitReply_t
), (u16
*)&mpi_reply
, 10,
3506 printk(MPT2SAS_ERR_FMT
"%s: handshake failed (r=%d)\n",
3507 ioc
->name
, __func__
, r
);
3511 ioc_status
= le16_to_cpu(mpi_reply
.IOCStatus
) & MPI2_IOCSTATUS_MASK
;
3512 if (ioc_status
!= MPI2_IOCSTATUS_SUCCESS
||
3513 mpi_reply
.IOCLogInfo
) {
3514 printk(MPT2SAS_ERR_FMT
"%s: failed\n", ioc
->name
, __func__
);
3522 * mpt2sas_port_enable_done - command completion routine for port enable
3523 * @ioc: per adapter object
3524 * @smid: system request message index
3525 * @msix_index: MSIX table index supplied by the OS
3526 * @reply: reply message frame(lower 32bit addr)
3528 * Return 1 meaning mf should be freed from _base_interrupt
3529 * 0 means the mf is freed from this function.
3532 mpt2sas_port_enable_done(struct MPT2SAS_ADAPTER
*ioc
, u16 smid
, u8 msix_index
,
3535 MPI2DefaultReply_t
*mpi_reply
;
3538 mpi_reply
= mpt2sas_base_get_reply_virt_addr(ioc
, reply
);
3539 if (mpi_reply
&& mpi_reply
->Function
== MPI2_FUNCTION_EVENT_ACK
)
3542 if (ioc
->port_enable_cmds
.status
== MPT2_CMD_NOT_USED
)
3545 ioc
->port_enable_cmds
.status
|= MPT2_CMD_COMPLETE
;
3547 ioc
->port_enable_cmds
.status
|= MPT2_CMD_REPLY_VALID
;
3548 memcpy(ioc
->port_enable_cmds
.reply
, mpi_reply
,
3549 mpi_reply
->MsgLength
*4);
3551 ioc
->port_enable_cmds
.status
&= ~MPT2_CMD_PENDING
;
3553 ioc_status
= le16_to_cpu(mpi_reply
->IOCStatus
) & MPI2_IOCSTATUS_MASK
;
3555 if (ioc_status
!= MPI2_IOCSTATUS_SUCCESS
)
3556 ioc
->port_enable_failed
= 1;
3558 if (ioc
->is_driver_loading
) {
3559 if (ioc_status
== MPI2_IOCSTATUS_SUCCESS
) {
3560 mpt2sas_port_enable_complete(ioc
);
3563 ioc
->start_scan_failed
= ioc_status
;
3564 ioc
->start_scan
= 0;
3568 complete(&ioc
->port_enable_cmds
.done
);
3574 * _base_send_port_enable - send port_enable(discovery stuff) to firmware
3575 * @ioc: per adapter object
3576 * @sleep_flag: CAN_SLEEP or NO_SLEEP
3578 * Returns 0 for success, non-zero for failure.
3581 _base_send_port_enable(struct MPT2SAS_ADAPTER
*ioc
, int sleep_flag
)
3583 Mpi2PortEnableRequest_t
*mpi_request
;
3584 Mpi2PortEnableReply_t
*mpi_reply
;
3585 unsigned long timeleft
;
3590 printk(MPT2SAS_INFO_FMT
"sending port enable !!\n", ioc
->name
);
3592 if (ioc
->port_enable_cmds
.status
& MPT2_CMD_PENDING
) {
3593 printk(MPT2SAS_ERR_FMT
"%s: internal command already in use\n",
3594 ioc
->name
, __func__
);
3598 smid
= mpt2sas_base_get_smid(ioc
, ioc
->port_enable_cb_idx
);
3600 printk(MPT2SAS_ERR_FMT
"%s: failed obtaining a smid\n",
3601 ioc
->name
, __func__
);
3605 ioc
->port_enable_cmds
.status
= MPT2_CMD_PENDING
;
3606 mpi_request
= mpt2sas_base_get_msg_frame(ioc
, smid
);
3607 ioc
->port_enable_cmds
.smid
= smid
;
3608 memset(mpi_request
, 0, sizeof(Mpi2PortEnableRequest_t
));
3609 mpi_request
->Function
= MPI2_FUNCTION_PORT_ENABLE
;
3611 init_completion(&ioc
->port_enable_cmds
.done
);
3612 mpt2sas_base_put_smid_default(ioc
, smid
);
3613 timeleft
= wait_for_completion_timeout(&ioc
->port_enable_cmds
.done
,
3615 if (!(ioc
->port_enable_cmds
.status
& MPT2_CMD_COMPLETE
)) {
3616 printk(MPT2SAS_ERR_FMT
"%s: timeout\n",
3617 ioc
->name
, __func__
);
3618 _debug_dump_mf(mpi_request
,
3619 sizeof(Mpi2PortEnableRequest_t
)/4);
3620 if (ioc
->port_enable_cmds
.status
& MPT2_CMD_RESET
)
3626 mpi_reply
= ioc
->port_enable_cmds
.reply
;
3628 ioc_status
= le16_to_cpu(mpi_reply
->IOCStatus
) & MPI2_IOCSTATUS_MASK
;
3629 if (ioc_status
!= MPI2_IOCSTATUS_SUCCESS
) {
3630 printk(MPT2SAS_ERR_FMT
"%s: failed with (ioc_status=0x%08x)\n",
3631 ioc
->name
, __func__
, ioc_status
);
3636 ioc
->port_enable_cmds
.status
= MPT2_CMD_NOT_USED
;
3637 printk(MPT2SAS_INFO_FMT
"port enable: %s\n", ioc
->name
, ((r
== 0) ?
3638 "SUCCESS" : "FAILED"));
3643 * mpt2sas_port_enable - initiate firmware discovery (don't wait for reply)
3644 * @ioc: per adapter object
3646 * Returns 0 for success, non-zero for failure.
3649 mpt2sas_port_enable(struct MPT2SAS_ADAPTER
*ioc
)
3651 Mpi2PortEnableRequest_t
*mpi_request
;
3654 printk(MPT2SAS_INFO_FMT
"sending port enable !!\n", ioc
->name
);
3656 if (ioc
->port_enable_cmds
.status
& MPT2_CMD_PENDING
) {
3657 printk(MPT2SAS_ERR_FMT
"%s: internal command already in use\n",
3658 ioc
->name
, __func__
);
3662 smid
= mpt2sas_base_get_smid(ioc
, ioc
->port_enable_cb_idx
);
3664 printk(MPT2SAS_ERR_FMT
"%s: failed obtaining a smid\n",
3665 ioc
->name
, __func__
);
3669 ioc
->port_enable_cmds
.status
= MPT2_CMD_PENDING
;
3670 mpi_request
= mpt2sas_base_get_msg_frame(ioc
, smid
);
3671 ioc
->port_enable_cmds
.smid
= smid
;
3672 memset(mpi_request
, 0, sizeof(Mpi2PortEnableRequest_t
));
3673 mpi_request
->Function
= MPI2_FUNCTION_PORT_ENABLE
;
3675 mpt2sas_base_put_smid_default(ioc
, smid
);
3680 * _base_determine_wait_on_discovery - desposition
3681 * @ioc: per adapter object
3683 * Decide whether to wait on discovery to complete. Used to either
3684 * locate boot device, or report volumes ahead of physical devices.
3686 * Returns 1 for wait, 0 for don't wait
3689 _base_determine_wait_on_discovery(struct MPT2SAS_ADAPTER
*ioc
)
3691 /* We wait for discovery to complete if IR firmware is loaded.
3692 * The sas topology events arrive before PD events, so we need time to
3693 * turn on the bit in ioc->pd_handles to indicate PD
3694 * Also, it maybe required to report Volumes ahead of physical
3695 * devices when MPI2_IOCPAGE8_IRFLAGS_LOW_VOLUME_MAPPING is set.
3697 if (ioc
->ir_firmware
)
3700 /* if no Bios, then we don't need to wait */
3701 if (!ioc
->bios_pg3
.BiosVersion
)
3704 /* Bios is present, then we drop down here.
3706 * If there any entries in the Bios Page 2, then we wait
3707 * for discovery to complete.
3710 /* Current Boot Device */
3711 if ((ioc
->bios_pg2
.CurrentBootDeviceForm
&
3712 MPI2_BIOSPAGE2_FORM_MASK
) ==
3713 MPI2_BIOSPAGE2_FORM_NO_DEVICE_SPECIFIED
&&
3714 /* Request Boot Device */
3715 (ioc
->bios_pg2
.ReqBootDeviceForm
&
3716 MPI2_BIOSPAGE2_FORM_MASK
) ==
3717 MPI2_BIOSPAGE2_FORM_NO_DEVICE_SPECIFIED
&&
3718 /* Alternate Request Boot Device */
3719 (ioc
->bios_pg2
.ReqAltBootDeviceForm
&
3720 MPI2_BIOSPAGE2_FORM_MASK
) ==
3721 MPI2_BIOSPAGE2_FORM_NO_DEVICE_SPECIFIED
)
3729 * _base_unmask_events - turn on notification for this event
3730 * @ioc: per adapter object
3731 * @event: firmware event
3733 * The mask is stored in ioc->event_masks.
3736 _base_unmask_events(struct MPT2SAS_ADAPTER
*ioc
, u16 event
)
3743 desired_event
= (1 << (event
% 32));
3746 ioc
->event_masks
[0] &= ~desired_event
;
3747 else if (event
< 64)
3748 ioc
->event_masks
[1] &= ~desired_event
;
3749 else if (event
< 96)
3750 ioc
->event_masks
[2] &= ~desired_event
;
3751 else if (event
< 128)
3752 ioc
->event_masks
[3] &= ~desired_event
;
3756 * _base_event_notification - send event notification
3757 * @ioc: per adapter object
3758 * @sleep_flag: CAN_SLEEP or NO_SLEEP
3760 * Returns 0 for success, non-zero for failure.
3763 _base_event_notification(struct MPT2SAS_ADAPTER
*ioc
, int sleep_flag
)
3765 Mpi2EventNotificationRequest_t
*mpi_request
;
3766 unsigned long timeleft
;
3771 dinitprintk(ioc
, printk(MPT2SAS_INFO_FMT
"%s\n", ioc
->name
,
3774 if (ioc
->base_cmds
.status
& MPT2_CMD_PENDING
) {
3775 printk(MPT2SAS_ERR_FMT
"%s: internal command already in use\n",
3776 ioc
->name
, __func__
);
3780 smid
= mpt2sas_base_get_smid(ioc
, ioc
->base_cb_idx
);
3782 printk(MPT2SAS_ERR_FMT
"%s: failed obtaining a smid\n",
3783 ioc
->name
, __func__
);
3786 ioc
->base_cmds
.status
= MPT2_CMD_PENDING
;
3787 mpi_request
= mpt2sas_base_get_msg_frame(ioc
, smid
);
3788 ioc
->base_cmds
.smid
= smid
;
3789 memset(mpi_request
, 0, sizeof(Mpi2EventNotificationRequest_t
));
3790 mpi_request
->Function
= MPI2_FUNCTION_EVENT_NOTIFICATION
;
3791 mpi_request
->VF_ID
= 0; /* TODO */
3792 mpi_request
->VP_ID
= 0;
3793 for (i
= 0; i
< MPI2_EVENT_NOTIFY_EVENTMASK_WORDS
; i
++)
3794 mpi_request
->EventMasks
[i
] =
3795 cpu_to_le32(ioc
->event_masks
[i
]);
3796 init_completion(&ioc
->base_cmds
.done
);
3797 mpt2sas_base_put_smid_default(ioc
, smid
);
3798 timeleft
= wait_for_completion_timeout(&ioc
->base_cmds
.done
, 30*HZ
);
3799 if (!(ioc
->base_cmds
.status
& MPT2_CMD_COMPLETE
)) {
3800 printk(MPT2SAS_ERR_FMT
"%s: timeout\n",
3801 ioc
->name
, __func__
);
3802 _debug_dump_mf(mpi_request
,
3803 sizeof(Mpi2EventNotificationRequest_t
)/4);
3804 if (ioc
->base_cmds
.status
& MPT2_CMD_RESET
)
3809 dinitprintk(ioc
, printk(MPT2SAS_INFO_FMT
"%s: complete\n",
3810 ioc
->name
, __func__
));
3811 ioc
->base_cmds
.status
= MPT2_CMD_NOT_USED
;
3816 * mpt2sas_base_validate_event_type - validating event types
3817 * @ioc: per adapter object
3818 * @event: firmware event
3820 * This will turn on firmware event notification when application
3821 * ask for that event. We don't mask events that are already enabled.
3824 mpt2sas_base_validate_event_type(struct MPT2SAS_ADAPTER
*ioc
, u32
*event_type
)
3827 u32 event_mask
, desired_event
;
3828 u8 send_update_to_fw
;
3830 for (i
= 0, send_update_to_fw
= 0; i
<
3831 MPI2_EVENT_NOTIFY_EVENTMASK_WORDS
; i
++) {
3832 event_mask
= ~event_type
[i
];
3834 for (j
= 0; j
< 32; j
++) {
3835 if (!(event_mask
& desired_event
) &&
3836 (ioc
->event_masks
[i
] & desired_event
)) {
3837 ioc
->event_masks
[i
] &= ~desired_event
;
3838 send_update_to_fw
= 1;
3840 desired_event
= (desired_event
<< 1);
3844 if (!send_update_to_fw
)
3847 mutex_lock(&ioc
->base_cmds
.mutex
);
3848 _base_event_notification(ioc
, CAN_SLEEP
);
3849 mutex_unlock(&ioc
->base_cmds
.mutex
);
3853 * _base_diag_reset - the "big hammer" start of day reset
3854 * @ioc: per adapter object
3855 * @sleep_flag: CAN_SLEEP or NO_SLEEP
3857 * Returns 0 for success, non-zero for failure.
3860 _base_diag_reset(struct MPT2SAS_ADAPTER
*ioc
, int sleep_flag
)
3862 u32 host_diagnostic
;
3867 printk(MPT2SAS_INFO_FMT
"sending diag reset !!\n", ioc
->name
);
3868 drsprintk(ioc
, printk(MPT2SAS_INFO_FMT
"clear interrupts\n",
3873 /* Write magic sequence to WriteSequence register
3874 * Loop until in diagnostic mode
3876 drsprintk(ioc
, printk(MPT2SAS_INFO_FMT
"write magic "
3877 "sequence\n", ioc
->name
));
3878 writel(MPI2_WRSEQ_FLUSH_KEY_VALUE
, &ioc
->chip
->WriteSequence
);
3879 writel(MPI2_WRSEQ_1ST_KEY_VALUE
, &ioc
->chip
->WriteSequence
);
3880 writel(MPI2_WRSEQ_2ND_KEY_VALUE
, &ioc
->chip
->WriteSequence
);
3881 writel(MPI2_WRSEQ_3RD_KEY_VALUE
, &ioc
->chip
->WriteSequence
);
3882 writel(MPI2_WRSEQ_4TH_KEY_VALUE
, &ioc
->chip
->WriteSequence
);
3883 writel(MPI2_WRSEQ_5TH_KEY_VALUE
, &ioc
->chip
->WriteSequence
);
3884 writel(MPI2_WRSEQ_6TH_KEY_VALUE
, &ioc
->chip
->WriteSequence
);
3887 if (sleep_flag
== CAN_SLEEP
)
3895 host_diagnostic
= readl(&ioc
->chip
->HostDiagnostic
);
3896 drsprintk(ioc
, printk(MPT2SAS_INFO_FMT
"wrote magic "
3897 "sequence: count(%d), host_diagnostic(0x%08x)\n",
3898 ioc
->name
, count
, host_diagnostic
));
3900 } while ((host_diagnostic
& MPI2_DIAG_DIAG_WRITE_ENABLE
) == 0);
3902 hcb_size
= readl(&ioc
->chip
->HCBSize
);
3904 drsprintk(ioc
, printk(MPT2SAS_INFO_FMT
"diag reset: issued\n",
3906 writel(host_diagnostic
| MPI2_DIAG_RESET_ADAPTER
,
3907 &ioc
->chip
->HostDiagnostic
);
3909 /* don't access any registers for 50 milliseconds */
3912 /* 300 second max wait */
3913 for (count
= 0; count
< 3000000 ; count
++) {
3915 host_diagnostic
= readl(&ioc
->chip
->HostDiagnostic
);
3917 if (host_diagnostic
== 0xFFFFFFFF)
3919 if (!(host_diagnostic
& MPI2_DIAG_RESET_ADAPTER
))
3923 if (sleep_flag
== CAN_SLEEP
)
3929 if (host_diagnostic
& MPI2_DIAG_HCB_MODE
) {
3931 drsprintk(ioc
, printk(MPT2SAS_INFO_FMT
"restart the adapter "
3932 "assuming the HCB Address points to good F/W\n",
3934 host_diagnostic
&= ~MPI2_DIAG_BOOT_DEVICE_SELECT_MASK
;
3935 host_diagnostic
|= MPI2_DIAG_BOOT_DEVICE_SELECT_HCDW
;
3936 writel(host_diagnostic
, &ioc
->chip
->HostDiagnostic
);
3938 drsprintk(ioc
, printk(MPT2SAS_INFO_FMT
3939 "re-enable the HCDW\n", ioc
->name
));
3940 writel(hcb_size
| MPI2_HCB_SIZE_HCB_ENABLE
,
3941 &ioc
->chip
->HCBSize
);
3944 drsprintk(ioc
, printk(MPT2SAS_INFO_FMT
"restart the adapter\n",
3946 writel(host_diagnostic
& ~MPI2_DIAG_HOLD_IOC_RESET
,
3947 &ioc
->chip
->HostDiagnostic
);
3949 drsprintk(ioc
, printk(MPT2SAS_INFO_FMT
"disable writes to the "
3950 "diagnostic register\n", ioc
->name
));
3951 writel(MPI2_WRSEQ_FLUSH_KEY_VALUE
, &ioc
->chip
->WriteSequence
);
3953 drsprintk(ioc
, printk(MPT2SAS_INFO_FMT
"Wait for FW to go to the "
3954 "READY state\n", ioc
->name
));
3955 ioc_state
= _base_wait_on_iocstate(ioc
, MPI2_IOC_STATE_READY
, 20,
3958 printk(MPT2SAS_ERR_FMT
"%s: failed going to ready state "
3959 " (ioc_state=0x%x)\n", ioc
->name
, __func__
, ioc_state
);
3963 printk(MPT2SAS_INFO_FMT
"diag reset: SUCCESS\n", ioc
->name
);
3967 printk(MPT2SAS_ERR_FMT
"diag reset: FAILED\n", ioc
->name
);
3972 * _base_make_ioc_ready - put controller in READY state
3973 * @ioc: per adapter object
3974 * @sleep_flag: CAN_SLEEP or NO_SLEEP
3975 * @type: FORCE_BIG_HAMMER or SOFT_RESET
3977 * Returns 0 for success, non-zero for failure.
3980 _base_make_ioc_ready(struct MPT2SAS_ADAPTER
*ioc
, int sleep_flag
,
3981 enum reset_type type
)
3986 dinitprintk(ioc
, printk(MPT2SAS_INFO_FMT
"%s\n", ioc
->name
,
3989 if (ioc
->pci_error_recovery
)
3992 ioc_state
= mpt2sas_base_get_iocstate(ioc
, 0);
3993 dhsprintk(ioc
, printk(MPT2SAS_INFO_FMT
"%s: ioc_state(0x%08x)\n",
3994 ioc
->name
, __func__
, ioc_state
));
3996 if ((ioc_state
& MPI2_IOC_STATE_MASK
) == MPI2_IOC_STATE_READY
)
3999 if (ioc_state
& MPI2_DOORBELL_USED
) {
4000 dhsprintk(ioc
, printk(MPT2SAS_INFO_FMT
"unexpected doorbell "
4001 "active!\n", ioc
->name
));
4002 goto issue_diag_reset
;
4005 if ((ioc_state
& MPI2_IOC_STATE_MASK
) == MPI2_IOC_STATE_FAULT
) {
4006 mpt2sas_base_fault_info(ioc
, ioc_state
&
4007 MPI2_DOORBELL_DATA_MASK
);
4008 goto issue_diag_reset
;
4011 if (type
== FORCE_BIG_HAMMER
)
4012 goto issue_diag_reset
;
4014 if ((ioc_state
& MPI2_IOC_STATE_MASK
) == MPI2_IOC_STATE_OPERATIONAL
)
4015 if (!(_base_send_ioc_reset(ioc
,
4016 MPI2_FUNCTION_IOC_MESSAGE_UNIT_RESET
, 15, CAN_SLEEP
))) {
4017 ioc
->ioc_reset_count
++;
4022 rc
= _base_diag_reset(ioc
, CAN_SLEEP
);
4023 ioc
->ioc_reset_count
++;
4028 * _base_make_ioc_operational - put controller in OPERATIONAL state
4029 * @ioc: per adapter object
4030 * @sleep_flag: CAN_SLEEP or NO_SLEEP
4032 * Returns 0 for success, non-zero for failure.
4035 _base_make_ioc_operational(struct MPT2SAS_ADAPTER
*ioc
, int sleep_flag
)
4038 unsigned long flags
;
4041 struct _tr_list
*delayed_tr
, *delayed_tr_next
;
4043 struct adapter_reply_queue
*reply_q
;
4044 long reply_post_free
;
4045 u32 reply_post_free_sz
;
4047 dinitprintk(ioc
, printk(MPT2SAS_INFO_FMT
"%s\n", ioc
->name
,
4050 /* clean the delayed target reset list */
4051 list_for_each_entry_safe(delayed_tr
, delayed_tr_next
,
4052 &ioc
->delayed_tr_list
, list
) {
4053 list_del(&delayed_tr
->list
);
4057 list_for_each_entry_safe(delayed_tr
, delayed_tr_next
,
4058 &ioc
->delayed_tr_volume_list
, list
) {
4059 list_del(&delayed_tr
->list
);
4063 /* initialize the scsi lookup free list */
4064 spin_lock_irqsave(&ioc
->scsi_lookup_lock
, flags
);
4065 INIT_LIST_HEAD(&ioc
->free_list
);
4067 for (i
= 0; i
< ioc
->scsiio_depth
; i
++, smid
++) {
4068 INIT_LIST_HEAD(&ioc
->scsi_lookup
[i
].chain_list
);
4069 ioc
->scsi_lookup
[i
].cb_idx
= 0xFF;
4070 ioc
->scsi_lookup
[i
].smid
= smid
;
4071 ioc
->scsi_lookup
[i
].scmd
= NULL
;
4072 ioc
->scsi_lookup
[i
].direct_io
= 0;
4073 list_add_tail(&ioc
->scsi_lookup
[i
].tracker_list
,
4077 /* hi-priority queue */
4078 INIT_LIST_HEAD(&ioc
->hpr_free_list
);
4079 smid
= ioc
->hi_priority_smid
;
4080 for (i
= 0; i
< ioc
->hi_priority_depth
; i
++, smid
++) {
4081 ioc
->hpr_lookup
[i
].cb_idx
= 0xFF;
4082 ioc
->hpr_lookup
[i
].smid
= smid
;
4083 list_add_tail(&ioc
->hpr_lookup
[i
].tracker_list
,
4084 &ioc
->hpr_free_list
);
4087 /* internal queue */
4088 INIT_LIST_HEAD(&ioc
->internal_free_list
);
4089 smid
= ioc
->internal_smid
;
4090 for (i
= 0; i
< ioc
->internal_depth
; i
++, smid
++) {
4091 ioc
->internal_lookup
[i
].cb_idx
= 0xFF;
4092 ioc
->internal_lookup
[i
].smid
= smid
;
4093 list_add_tail(&ioc
->internal_lookup
[i
].tracker_list
,
4094 &ioc
->internal_free_list
);
4098 INIT_LIST_HEAD(&ioc
->free_chain_list
);
4099 for (i
= 0; i
< ioc
->chain_depth
; i
++)
4100 list_add_tail(&ioc
->chain_lookup
[i
].tracker_list
,
4101 &ioc
->free_chain_list
);
4103 spin_unlock_irqrestore(&ioc
->scsi_lookup_lock
, flags
);
4105 /* initialize Reply Free Queue */
4106 for (i
= 0, reply_address
= (u32
)ioc
->reply_dma
;
4107 i
< ioc
->reply_free_queue_depth
; i
++, reply_address
+=
4109 ioc
->reply_free
[i
] = cpu_to_le32(reply_address
);
4111 /* initialize reply queues */
4112 if (ioc
->is_driver_loading
)
4113 _base_assign_reply_queues(ioc
);
4115 /* initialize Reply Post Free Queue */
4116 reply_post_free
= (long)ioc
->reply_post_free
;
4117 reply_post_free_sz
= ioc
->reply_post_queue_depth
*
4118 sizeof(Mpi2DefaultReplyDescriptor_t
);
4119 list_for_each_entry(reply_q
, &ioc
->reply_queue_list
, list
) {
4120 reply_q
->reply_post_host_index
= 0;
4121 reply_q
->reply_post_free
= (Mpi2ReplyDescriptorsUnion_t
*)
4123 for (i
= 0; i
< ioc
->reply_post_queue_depth
; i
++)
4124 reply_q
->reply_post_free
[i
].Words
=
4125 cpu_to_le64(ULLONG_MAX
);
4126 if (!_base_is_controller_msix_enabled(ioc
))
4127 goto skip_init_reply_post_free_queue
;
4128 reply_post_free
+= reply_post_free_sz
;
4130 skip_init_reply_post_free_queue
:
4132 r
= _base_send_ioc_init(ioc
, sleep_flag
);
4136 /* initialize reply free host index */
4137 ioc
->reply_free_host_index
= ioc
->reply_free_queue_depth
- 1;
4138 writel(ioc
->reply_free_host_index
, &ioc
->chip
->ReplyFreeHostIndex
);
4140 /* initialize reply post host index */
4141 list_for_each_entry(reply_q
, &ioc
->reply_queue_list
, list
) {
4142 writel(reply_q
->msix_index
<< MPI2_RPHI_MSIX_INDEX_SHIFT
,
4143 &ioc
->chip
->ReplyPostHostIndex
);
4144 if (!_base_is_controller_msix_enabled(ioc
))
4145 goto skip_init_reply_post_host_index
;
4148 skip_init_reply_post_host_index
:
4150 _base_unmask_interrupts(ioc
);
4152 r
= _base_event_notification(ioc
, sleep_flag
);
4156 if (sleep_flag
== CAN_SLEEP
)
4157 _base_static_config_pages(ioc
);
4160 if (ioc
->is_driver_loading
) {
4161 if (ioc
->is_warpdrive
&& ioc
->manu_pg10
.OEMIdentifier
4164 le32_to_cpu(ioc
->manu_pg10
.OEMSpecificFlags0
) &
4165 MFG_PAGE10_HIDE_SSDS_MASK
);
4166 if (hide_flag
!= MFG_PAGE10_HIDE_SSDS_MASK
)
4167 ioc
->mfg_pg10_hide_flag
= hide_flag
;
4169 ioc
->wait_for_discovery_to_complete
=
4170 _base_determine_wait_on_discovery(ioc
);
4171 return r
; /* scan_start and scan_finished support */
4173 r
= _base_send_port_enable(ioc
, sleep_flag
);
4181 * mpt2sas_base_free_resources - free resources controller resources (io/irq/memap)
4182 * @ioc: per adapter object
4187 mpt2sas_base_free_resources(struct MPT2SAS_ADAPTER
*ioc
)
4189 struct pci_dev
*pdev
= ioc
->pdev
;
4191 dexitprintk(ioc
, printk(MPT2SAS_INFO_FMT
"%s\n", ioc
->name
,
4194 _base_mask_interrupts(ioc
);
4195 ioc
->shost_recovery
= 1;
4196 _base_make_ioc_ready(ioc
, CAN_SLEEP
, SOFT_RESET
);
4197 ioc
->shost_recovery
= 0;
4198 _base_free_irq(ioc
);
4199 _base_disable_msix(ioc
);
4203 pci_release_selected_regions(ioc
->pdev
, ioc
->bars
);
4204 pci_disable_pcie_error_reporting(pdev
);
4205 pci_disable_device(pdev
);
4210 * mpt2sas_base_attach - attach controller instance
4211 * @ioc: per adapter object
4213 * Returns 0 for success, non-zero for failure.
4216 mpt2sas_base_attach(struct MPT2SAS_ADAPTER
*ioc
)
4219 int cpu_id
, last_cpu_id
= 0;
4221 dinitprintk(ioc
, printk(MPT2SAS_INFO_FMT
"%s\n", ioc
->name
,
4224 /* setup cpu_msix_table */
4225 ioc
->cpu_count
= num_online_cpus();
4226 for_each_online_cpu(cpu_id
)
4227 last_cpu_id
= cpu_id
;
4228 ioc
->cpu_msix_table_sz
= last_cpu_id
+ 1;
4229 ioc
->cpu_msix_table
= kzalloc(ioc
->cpu_msix_table_sz
, GFP_KERNEL
);
4230 ioc
->reply_queue_count
= 1;
4231 if (!ioc
->cpu_msix_table
) {
4232 dfailprintk(ioc
, printk(MPT2SAS_INFO_FMT
"allocation for "
4233 "cpu_msix_table failed!!!\n", ioc
->name
));
4235 goto out_free_resources
;
4238 if (ioc
->is_warpdrive
) {
4239 ioc
->reply_post_host_index
= kcalloc(ioc
->cpu_msix_table_sz
,
4240 sizeof(resource_size_t
*), GFP_KERNEL
);
4241 if (!ioc
->reply_post_host_index
) {
4242 dfailprintk(ioc
, printk(MPT2SAS_INFO_FMT
"allocation "
4243 "for cpu_msix_table failed!!!\n", ioc
->name
));
4245 goto out_free_resources
;
4249 r
= mpt2sas_base_map_resources(ioc
);
4251 goto out_free_resources
;
4253 if (ioc
->is_warpdrive
) {
4254 ioc
->reply_post_host_index
[0] =
4255 (resource_size_t
*)&ioc
->chip
->ReplyPostHostIndex
;
4257 for (i
= 1; i
< ioc
->cpu_msix_table_sz
; i
++)
4258 ioc
->reply_post_host_index
[i
] = (resource_size_t
*)
4259 ((u8
*)&ioc
->chip
->Doorbell
+ (0x4000 + ((i
- 1)
4263 pci_set_drvdata(ioc
->pdev
, ioc
->shost
);
4264 r
= _base_get_ioc_facts(ioc
, CAN_SLEEP
);
4266 goto out_free_resources
;
4268 r
= _base_make_ioc_ready(ioc
, CAN_SLEEP
, SOFT_RESET
);
4270 goto out_free_resources
;
4272 ioc
->pfacts
= kcalloc(ioc
->facts
.NumberOfPorts
,
4273 sizeof(struct mpt2sas_port_facts
), GFP_KERNEL
);
4276 goto out_free_resources
;
4279 for (i
= 0 ; i
< ioc
->facts
.NumberOfPorts
; i
++) {
4280 r
= _base_get_port_facts(ioc
, i
, CAN_SLEEP
);
4282 goto out_free_resources
;
4285 r
= _base_allocate_memory_pools(ioc
, CAN_SLEEP
);
4287 goto out_free_resources
;
4289 init_waitqueue_head(&ioc
->reset_wq
);
4290 /* allocate memory pd handle bitmask list */
4291 ioc
->pd_handles_sz
= (ioc
->facts
.MaxDevHandle
/ 8);
4292 if (ioc
->facts
.MaxDevHandle
% 8)
4293 ioc
->pd_handles_sz
++;
4294 ioc
->pd_handles
= kzalloc(ioc
->pd_handles_sz
,
4296 if (!ioc
->pd_handles
) {
4298 goto out_free_resources
;
4300 ioc
->blocking_handles
= kzalloc(ioc
->pd_handles_sz
,
4302 if (!ioc
->blocking_handles
) {
4304 goto out_free_resources
;
4306 ioc
->fwfault_debug
= mpt2sas_fwfault_debug
;
4308 /* base internal command bits */
4309 mutex_init(&ioc
->base_cmds
.mutex
);
4310 ioc
->base_cmds
.reply
= kzalloc(ioc
->reply_sz
, GFP_KERNEL
);
4311 ioc
->base_cmds
.status
= MPT2_CMD_NOT_USED
;
4313 /* port_enable command bits */
4314 ioc
->port_enable_cmds
.reply
= kzalloc(ioc
->reply_sz
, GFP_KERNEL
);
4315 ioc
->port_enable_cmds
.status
= MPT2_CMD_NOT_USED
;
4317 /* transport internal command bits */
4318 ioc
->transport_cmds
.reply
= kzalloc(ioc
->reply_sz
, GFP_KERNEL
);
4319 ioc
->transport_cmds
.status
= MPT2_CMD_NOT_USED
;
4320 mutex_init(&ioc
->transport_cmds
.mutex
);
4322 /* scsih internal command bits */
4323 ioc
->scsih_cmds
.reply
= kzalloc(ioc
->reply_sz
, GFP_KERNEL
);
4324 ioc
->scsih_cmds
.status
= MPT2_CMD_NOT_USED
;
4325 mutex_init(&ioc
->scsih_cmds
.mutex
);
4327 /* task management internal command bits */
4328 ioc
->tm_cmds
.reply
= kzalloc(ioc
->reply_sz
, GFP_KERNEL
);
4329 ioc
->tm_cmds
.status
= MPT2_CMD_NOT_USED
;
4330 mutex_init(&ioc
->tm_cmds
.mutex
);
4332 /* config page internal command bits */
4333 ioc
->config_cmds
.reply
= kzalloc(ioc
->reply_sz
, GFP_KERNEL
);
4334 ioc
->config_cmds
.status
= MPT2_CMD_NOT_USED
;
4335 mutex_init(&ioc
->config_cmds
.mutex
);
4337 /* ctl module internal command bits */
4338 ioc
->ctl_cmds
.reply
= kzalloc(ioc
->reply_sz
, GFP_KERNEL
);
4339 ioc
->ctl_cmds
.sense
= kzalloc(SCSI_SENSE_BUFFERSIZE
, GFP_KERNEL
);
4340 ioc
->ctl_cmds
.status
= MPT2_CMD_NOT_USED
;
4341 mutex_init(&ioc
->ctl_cmds
.mutex
);
4343 if (!ioc
->base_cmds
.reply
|| !ioc
->transport_cmds
.reply
||
4344 !ioc
->scsih_cmds
.reply
|| !ioc
->tm_cmds
.reply
||
4345 !ioc
->config_cmds
.reply
|| !ioc
->ctl_cmds
.reply
||
4346 !ioc
->ctl_cmds
.sense
) {
4348 goto out_free_resources
;
4351 if (!ioc
->base_cmds
.reply
|| !ioc
->transport_cmds
.reply
||
4352 !ioc
->scsih_cmds
.reply
|| !ioc
->tm_cmds
.reply
||
4353 !ioc
->config_cmds
.reply
|| !ioc
->ctl_cmds
.reply
) {
4355 goto out_free_resources
;
4358 for (i
= 0; i
< MPI2_EVENT_NOTIFY_EVENTMASK_WORDS
; i
++)
4359 ioc
->event_masks
[i
] = -1;
4361 /* here we enable the events we care about */
4362 _base_unmask_events(ioc
, MPI2_EVENT_SAS_DISCOVERY
);
4363 _base_unmask_events(ioc
, MPI2_EVENT_SAS_BROADCAST_PRIMITIVE
);
4364 _base_unmask_events(ioc
, MPI2_EVENT_SAS_TOPOLOGY_CHANGE_LIST
);
4365 _base_unmask_events(ioc
, MPI2_EVENT_SAS_DEVICE_STATUS_CHANGE
);
4366 _base_unmask_events(ioc
, MPI2_EVENT_SAS_ENCL_DEVICE_STATUS_CHANGE
);
4367 _base_unmask_events(ioc
, MPI2_EVENT_IR_CONFIGURATION_CHANGE_LIST
);
4368 _base_unmask_events(ioc
, MPI2_EVENT_IR_VOLUME
);
4369 _base_unmask_events(ioc
, MPI2_EVENT_IR_PHYSICAL_DISK
);
4370 _base_unmask_events(ioc
, MPI2_EVENT_IR_OPERATION_STATUS
);
4371 _base_unmask_events(ioc
, MPI2_EVENT_LOG_ENTRY_ADDED
);
4372 r
= _base_make_ioc_operational(ioc
, CAN_SLEEP
);
4374 goto out_free_resources
;
4376 if (missing_delay
[0] != -1 && missing_delay
[1] != -1)
4377 _base_update_missing_delay(ioc
, missing_delay
[0],
4384 ioc
->remove_host
= 1;
4385 mpt2sas_base_free_resources(ioc
);
4386 _base_release_memory_pools(ioc
);
4387 pci_set_drvdata(ioc
->pdev
, NULL
);
4388 kfree(ioc
->cpu_msix_table
);
4389 if (ioc
->is_warpdrive
)
4390 kfree(ioc
->reply_post_host_index
);
4391 kfree(ioc
->pd_handles
);
4392 kfree(ioc
->blocking_handles
);
4393 kfree(ioc
->tm_cmds
.reply
);
4394 kfree(ioc
->transport_cmds
.reply
);
4395 kfree(ioc
->scsih_cmds
.reply
);
4396 kfree(ioc
->config_cmds
.reply
);
4397 kfree(ioc
->base_cmds
.reply
);
4398 kfree(ioc
->port_enable_cmds
.reply
);
4399 kfree(ioc
->ctl_cmds
.reply
);
4400 kfree(ioc
->ctl_cmds
.sense
);
4402 ioc
->ctl_cmds
.reply
= NULL
;
4403 ioc
->base_cmds
.reply
= NULL
;
4404 ioc
->tm_cmds
.reply
= NULL
;
4405 ioc
->scsih_cmds
.reply
= NULL
;
4406 ioc
->transport_cmds
.reply
= NULL
;
4407 ioc
->config_cmds
.reply
= NULL
;
4414 * mpt2sas_base_detach - remove controller instance
4415 * @ioc: per adapter object
4420 mpt2sas_base_detach(struct MPT2SAS_ADAPTER
*ioc
)
4423 dexitprintk(ioc
, printk(MPT2SAS_INFO_FMT
"%s\n", ioc
->name
,
4426 mpt2sas_base_stop_watchdog(ioc
);
4427 mpt2sas_base_free_resources(ioc
);
4428 _base_release_memory_pools(ioc
);
4429 pci_set_drvdata(ioc
->pdev
, NULL
);
4430 kfree(ioc
->cpu_msix_table
);
4431 if (ioc
->is_warpdrive
)
4432 kfree(ioc
->reply_post_host_index
);
4433 kfree(ioc
->pd_handles
);
4434 kfree(ioc
->blocking_handles
);
4436 kfree(ioc
->ctl_cmds
.reply
);
4437 kfree(ioc
->ctl_cmds
.sense
);
4438 kfree(ioc
->base_cmds
.reply
);
4439 kfree(ioc
->port_enable_cmds
.reply
);
4440 kfree(ioc
->tm_cmds
.reply
);
4441 kfree(ioc
->transport_cmds
.reply
);
4442 kfree(ioc
->scsih_cmds
.reply
);
4443 kfree(ioc
->config_cmds
.reply
);
4447 * _base_reset_handler - reset callback handler (for base)
4448 * @ioc: per adapter object
4449 * @reset_phase: phase
4451 * The handler for doing any required cleanup or initialization.
4453 * The reset phase can be MPT2_IOC_PRE_RESET, MPT2_IOC_AFTER_RESET,
4454 * MPT2_IOC_DONE_RESET
4459 _base_reset_handler(struct MPT2SAS_ADAPTER
*ioc
, int reset_phase
)
4461 mpt2sas_scsih_reset_handler(ioc
, reset_phase
);
4462 mpt2sas_ctl_reset_handler(ioc
, reset_phase
);
4463 switch (reset_phase
) {
4464 case MPT2_IOC_PRE_RESET
:
4465 dtmprintk(ioc
, printk(MPT2SAS_INFO_FMT
"%s: "
4466 "MPT2_IOC_PRE_RESET\n", ioc
->name
, __func__
));
4468 case MPT2_IOC_AFTER_RESET
:
4469 dtmprintk(ioc
, printk(MPT2SAS_INFO_FMT
"%s: "
4470 "MPT2_IOC_AFTER_RESET\n", ioc
->name
, __func__
));
4471 if (ioc
->transport_cmds
.status
& MPT2_CMD_PENDING
) {
4472 ioc
->transport_cmds
.status
|= MPT2_CMD_RESET
;
4473 mpt2sas_base_free_smid(ioc
, ioc
->transport_cmds
.smid
);
4474 complete(&ioc
->transport_cmds
.done
);
4476 if (ioc
->base_cmds
.status
& MPT2_CMD_PENDING
) {
4477 ioc
->base_cmds
.status
|= MPT2_CMD_RESET
;
4478 mpt2sas_base_free_smid(ioc
, ioc
->base_cmds
.smid
);
4479 complete(&ioc
->base_cmds
.done
);
4481 if (ioc
->port_enable_cmds
.status
& MPT2_CMD_PENDING
) {
4482 ioc
->port_enable_failed
= 1;
4483 ioc
->port_enable_cmds
.status
|= MPT2_CMD_RESET
;
4484 mpt2sas_base_free_smid(ioc
, ioc
->port_enable_cmds
.smid
);
4485 if (ioc
->is_driver_loading
) {
4486 ioc
->start_scan_failed
=
4487 MPI2_IOCSTATUS_INTERNAL_ERROR
;
4488 ioc
->start_scan
= 0;
4489 ioc
->port_enable_cmds
.status
=
4492 complete(&ioc
->port_enable_cmds
.done
);
4495 if (ioc
->config_cmds
.status
& MPT2_CMD_PENDING
) {
4496 ioc
->config_cmds
.status
|= MPT2_CMD_RESET
;
4497 mpt2sas_base_free_smid(ioc
, ioc
->config_cmds
.smid
);
4498 ioc
->config_cmds
.smid
= USHRT_MAX
;
4499 complete(&ioc
->config_cmds
.done
);
4502 case MPT2_IOC_DONE_RESET
:
4503 dtmprintk(ioc
, printk(MPT2SAS_INFO_FMT
"%s: "
4504 "MPT2_IOC_DONE_RESET\n", ioc
->name
, __func__
));
4510 * _wait_for_commands_to_complete - reset controller
4511 * @ioc: Pointer to MPT_ADAPTER structure
4512 * @sleep_flag: CAN_SLEEP or NO_SLEEP
4514 * This function waiting(3s) for all pending commands to complete
4515 * prior to putting controller in reset.
4518 _wait_for_commands_to_complete(struct MPT2SAS_ADAPTER
*ioc
, int sleep_flag
)
4521 unsigned long flags
;
4524 ioc
->pending_io_count
= 0;
4525 if (sleep_flag
!= CAN_SLEEP
)
4528 ioc_state
= mpt2sas_base_get_iocstate(ioc
, 0);
4529 if ((ioc_state
& MPI2_IOC_STATE_MASK
) != MPI2_IOC_STATE_OPERATIONAL
)
4532 /* pending command count */
4533 spin_lock_irqsave(&ioc
->scsi_lookup_lock
, flags
);
4534 for (i
= 0; i
< ioc
->scsiio_depth
; i
++)
4535 if (ioc
->scsi_lookup
[i
].cb_idx
!= 0xFF)
4536 ioc
->pending_io_count
++;
4537 spin_unlock_irqrestore(&ioc
->scsi_lookup_lock
, flags
);
4539 if (!ioc
->pending_io_count
)
4542 /* wait for pending commands to complete */
4543 wait_event_timeout(ioc
->reset_wq
, ioc
->pending_io_count
== 0, 10 * HZ
);
4547 * mpt2sas_base_hard_reset_handler - reset controller
4548 * @ioc: Pointer to MPT_ADAPTER structure
4549 * @sleep_flag: CAN_SLEEP or NO_SLEEP
4550 * @type: FORCE_BIG_HAMMER or SOFT_RESET
4552 * Returns 0 for success, non-zero for failure.
4555 mpt2sas_base_hard_reset_handler(struct MPT2SAS_ADAPTER
*ioc
, int sleep_flag
,
4556 enum reset_type type
)
4559 unsigned long flags
;
4561 dtmprintk(ioc
, printk(MPT2SAS_INFO_FMT
"%s: enter\n", ioc
->name
,
4564 if (ioc
->pci_error_recovery
) {
4565 printk(MPT2SAS_ERR_FMT
"%s: pci error recovery reset\n",
4566 ioc
->name
, __func__
);
4571 if (mpt2sas_fwfault_debug
)
4572 mpt2sas_halt_firmware(ioc
);
4574 /* TODO - What we really should be doing is pulling
4575 * out all the code associated with NO_SLEEP; its never used.
4576 * That is legacy code from mpt fusion driver, ported over.
4577 * I will leave this BUG_ON here for now till its been resolved.
4579 BUG_ON(sleep_flag
== NO_SLEEP
);
4581 /* wait for an active reset in progress to complete */
4582 if (!mutex_trylock(&ioc
->reset_in_progress_mutex
)) {
4585 } while (ioc
->shost_recovery
== 1);
4586 dtmprintk(ioc
, printk(MPT2SAS_INFO_FMT
"%s: exit\n", ioc
->name
,
4588 return ioc
->ioc_reset_in_progress_status
;
4591 spin_lock_irqsave(&ioc
->ioc_reset_in_progress_lock
, flags
);
4592 ioc
->shost_recovery
= 1;
4593 spin_unlock_irqrestore(&ioc
->ioc_reset_in_progress_lock
, flags
);
4595 _base_reset_handler(ioc
, MPT2_IOC_PRE_RESET
);
4596 _wait_for_commands_to_complete(ioc
, sleep_flag
);
4597 _base_mask_interrupts(ioc
);
4598 r
= _base_make_ioc_ready(ioc
, sleep_flag
, type
);
4601 _base_reset_handler(ioc
, MPT2_IOC_AFTER_RESET
);
4603 /* If this hard reset is called while port enable is active, then
4604 * there is no reason to call make_ioc_operational
4606 if (ioc
->is_driver_loading
&& ioc
->port_enable_failed
) {
4607 ioc
->remove_host
= 1;
4611 r
= _base_make_ioc_operational(ioc
, sleep_flag
);
4613 _base_reset_handler(ioc
, MPT2_IOC_DONE_RESET
);
4615 dtmprintk(ioc
, printk(MPT2SAS_INFO_FMT
"%s: %s\n",
4616 ioc
->name
, __func__
, ((r
== 0) ? "SUCCESS" : "FAILED")));
4618 spin_lock_irqsave(&ioc
->ioc_reset_in_progress_lock
, flags
);
4619 ioc
->ioc_reset_in_progress_status
= r
;
4620 ioc
->shost_recovery
= 0;
4621 spin_unlock_irqrestore(&ioc
->ioc_reset_in_progress_lock
, flags
);
4622 mutex_unlock(&ioc
->reset_in_progress_mutex
);
4625 dtmprintk(ioc
, printk(MPT2SAS_INFO_FMT
"%s: exit\n", ioc
->name
,