2 * This is the Fusion MPT base driver providing common API layer interface
3 * for access to MPT (Message Passing Technology) firmware.
5 * This code is based on drivers/scsi/mpt2sas/mpt2_base.h
6 * Copyright (C) 2007-2008 LSI Corporation
7 * (mailto:DL-MPTFusionLinux@lsi.com)
9 * This program is free software; you can redistribute it and/or
10 * modify it under the terms of the GNU General Public License
11 * as published by the Free Software Foundation; either version 2
12 * of the License, or (at your option) any later version.
14 * This program is distributed in the hope that it will be useful,
15 * but WITHOUT ANY WARRANTY; without even the implied warranty of
16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17 * GNU General Public License for more details.
20 * THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR
21 * CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT
22 * LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT,
23 * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is
24 * solely responsible for determining the appropriateness of using and
25 * distributing the Program and assumes all risks associated with its
26 * exercise of rights under this Agreement, including but not limited to
27 * the risks and costs of program errors, damage to or loss of data,
28 * programs or equipment, and unavailability or interruption of operations.
30 * DISCLAIMER OF LIABILITY
31 * NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY
32 * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
33 * DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND
34 * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
35 * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
36 * USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED
37 * HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES
39 * You should have received a copy of the GNU General Public License
40 * along with this program; if not, write to the Free Software
41 * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301,
45 #ifndef MPT2SAS_BASE_H_INCLUDED
46 #define MPT2SAS_BASE_H_INCLUDED
48 #include "mpi/mpi2_type.h"
50 #include "mpi/mpi2_ioc.h"
51 #include "mpi/mpi2_cnfg.h"
52 #include "mpi/mpi2_init.h"
53 #include "mpi/mpi2_raid.h"
54 #include "mpi/mpi2_tool.h"
55 #include "mpi/mpi2_sas.h"
57 #include <scsi/scsi.h>
58 #include <scsi/scsi_cmnd.h>
59 #include <scsi/scsi_device.h>
60 #include <scsi/scsi_host.h>
61 #include <scsi/scsi_tcq.h>
62 #include <scsi/scsi_transport_sas.h>
63 #include <scsi/scsi_dbg.h>
65 #include "mpt2sas_debug.h"
67 /* driver versioning info */
68 #define MPT2SAS_DRIVER_NAME "mpt2sas"
69 #define MPT2SAS_AUTHOR "LSI Corporation <DL-MPTFusionLinux@lsi.com>"
70 #define MPT2SAS_DESCRIPTION "LSI MPT Fusion SAS 2.0 Device Driver"
71 #define MPT2SAS_DRIVER_VERSION "01.100.02.00"
72 #define MPT2SAS_MAJOR_VERSION 01
73 #define MPT2SAS_MINOR_VERSION 100
74 #define MPT2SAS_BUILD_VERSION 02
75 #define MPT2SAS_RELEASE_VERSION 00
78 * Set MPT2SAS_SG_DEPTH value based on user input.
80 #ifdef CONFIG_SCSI_MPT2SAS_MAX_SGE
81 #if CONFIG_SCSI_MPT2SAS_MAX_SGE < 16
82 #define MPT2SAS_SG_DEPTH 16
83 #elif CONFIG_SCSI_MPT2SAS_MAX_SGE > 128
84 #define MPT2SAS_SG_DEPTH 128
86 #define MPT2SAS_SG_DEPTH CONFIG_SCSI_MPT2SAS_MAX_SGE
89 #define MPT2SAS_SG_DEPTH 128 /* MAX_HW_SEGMENTS */
96 #define MPT2SAS_SATA_QUEUE_DEPTH 32
97 #define MPT2SAS_SAS_QUEUE_DEPTH 254
98 #define MPT2SAS_RAID_QUEUE_DEPTH 128
100 #define MPT_NAME_LENGTH 32 /* generic length of strings */
101 #define MPT_STRING_LENGTH 64
103 #define MPT_MAX_CALLBACKS 16
108 #define INTERNAL_CMDS_COUNT 10 /* reserved cmds */
110 #define MPI2_HIM_MASK 0xFFFFFFFF /* mask every bit*/
112 #define MPT2SAS_INVALID_DEVICE_HANDLE 0xFFFF
118 #define MPT2_IOC_PRE_RESET 1 /* prior to host reset */
119 #define MPT2_IOC_AFTER_RESET 2 /* just after host reset */
120 #define MPT2_IOC_DONE_RESET 3 /* links re-initialized */
125 #define MPT2SAS_FMT "%s: "
126 #define MPT2SAS_DEBUG_FMT KERN_DEBUG MPT2SAS_FMT
127 #define MPT2SAS_INFO_FMT KERN_INFO MPT2SAS_FMT
128 #define MPT2SAS_NOTE_FMT KERN_NOTICE MPT2SAS_FMT
129 #define MPT2SAS_WARN_FMT KERN_WARNING MPT2SAS_FMT
130 #define MPT2SAS_ERR_FMT KERN_ERR MPT2SAS_FMT
135 #define MPT2SAS_DELL_BRANDING_SIZE 32
137 #define MPT2SAS_DELL_6GBPS_SAS_HBA_BRANDING "Dell 6Gbps SAS HBA"
138 #define MPT2SAS_DELL_PERC_H200_ADAPTER_BRANDING "Dell PERC H200 Adapter"
139 #define MPT2SAS_DELL_PERC_H200_INTEGRATED_BRANDING "Dell PERC H200 Integrated"
140 #define MPT2SAS_DELL_PERC_H200_MODULAR_BRANDING "Dell PERC H200 Modular"
141 #define MPT2SAS_DELL_PERC_H200_EMBEDDED_BRANDING "Dell PERC H200 Embedded"
142 #define MPT2SAS_DELL_PERC_H200_BRANDING "Dell PERC H200"
143 #define MPT2SAS_DELL_6GBPS_SAS_BRANDING "Dell 6Gbps SAS"
148 #define MPT2SAS_DELL_6GBPS_SAS_HBA_SSDID 0x1F1C
149 #define MPT2SAS_DELL_PERC_H200_ADAPTER_SSDID 0x1F1D
150 #define MPT2SAS_DELL_PERC_H200_INTEGRATED_SSDID 0x1F1E
151 #define MPT2SAS_DELL_PERC_H200_MODULAR_SSDID 0x1F1F
152 #define MPT2SAS_DELL_PERC_H200_EMBEDDED_SSDID 0x1F20
153 #define MPT2SAS_DELL_PERC_H200_SSDID 0x1F21
154 #define MPT2SAS_DELL_6GBPS_SAS_SSDID 0x1F22
157 * per target private data
159 #define MPT_TARGET_FLAGS_RAID_COMPONENT 0x01
160 #define MPT_TARGET_FLAGS_VOLUME 0x02
161 #define MPT_TARGET_FLAGS_DELETED 0x04
164 * struct MPT2SAS_TARGET - starget private hostdata
165 * @starget: starget object
166 * @sas_address: target sas address
167 * @handle: device handle
168 * @num_luns: number luns
169 * @flags: MPT_TARGET_FLAGS_XXX flags
170 * @deleted: target flaged for deletion
171 * @tm_busy: target is busy with TM request.
173 struct MPT2SAS_TARGET
{
174 struct scsi_target
*starget
;
184 * per device private data
186 #define MPT_DEVICE_FLAGS_INIT 0x01
187 #define MPT_DEVICE_TLR_ON 0x02
190 * struct MPT2SAS_DEVICE - sdev private hostdata
191 * @sas_target: starget private hostdata
193 * @flags: MPT_DEVICE_XXX flags
194 * @configured_lun: lun is configured
195 * @block: device is in SDEV_BLOCK state
196 * @tlr_snoop_check: flag used in determining whether to disable TLR
198 struct MPT2SAS_DEVICE
{
199 struct MPT2SAS_TARGET
*sas_target
;
207 #define MPT2_CMD_NOT_USED 0x8000 /* free */
208 #define MPT2_CMD_COMPLETE 0x0001 /* completed */
209 #define MPT2_CMD_PENDING 0x0002 /* pending */
210 #define MPT2_CMD_REPLY_VALID 0x0004 /* reply is valid */
211 #define MPT2_CMD_RESET 0x0008 /* host reset dropped the command */
214 * struct _internal_cmd - internal commands struct
217 * @reply: reply message pointer
218 * @status: MPT2_CMD_XXX status
219 * @smid: system message id
221 struct _internal_cmd
{
223 struct completion done
;
230 * SAS Topology Structures
234 * struct _sas_device - attached device information
235 * @list: sas device list
236 * @starget: starget object
237 * @sas_address: device sas address
238 * @device_name: retrieved from the SAS IDENTIFY frame.
239 * @handle: device handle
240 * @parent_handle: handle to parent device
241 * @enclosure_handle: enclosure handle
242 * @enclosure_logical_id: enclosure logical identifier
243 * @volume_handle: volume handle (valid when hidden raid member)
244 * @volume_wwid: volume unique identifier
245 * @device_info: bitfield provides detailed info about the device
247 * @channel: target channel
248 * @slot: number number
249 * @hidden_raid_component: set to 1 when this is a raid member
250 * @responding: used in _scsih_sas_device_mark_responding
253 struct list_head list
;
254 struct scsi_target
*starget
;
259 u16 enclosure_handle
;
260 u64 enclosure_logical_id
;
267 u8 hidden_raid_component
;
272 * struct _raid_device - raid volume link list
273 * @list: sas device list
274 * @starget: starget object
275 * @sdev: scsi device struct (volumes are single lun)
276 * @wwid: unique identifier for the volume
277 * @handle: device handle
279 * @channel: target channel
280 * @volume_type: the raid level
281 * @device_info: bitfield provides detailed info about the hidden components
282 * @num_pds: number of hidden raid components
283 * @responding: used in _scsih_raid_device_mark_responding
285 struct _raid_device
{
286 struct list_head list
;
287 struct scsi_target
*starget
;
288 struct scsi_device
*sdev
;
300 * struct _boot_device - boot device info
301 * @is_raid: flag to indicate whether this is volume
302 * @device: holds pointer for either struct _sas_device or
303 * struct _raid_device
305 struct _boot_device
{
311 * struct _sas_port - wide/narrow sas port information
312 * @port_list: list of ports belonging to expander
313 * @handle: device handle for this port
314 * @sas_address: sas address of this port
315 * @num_phys: number of phys belonging to this port
316 * @remote_identify: attached device identification
317 * @rphy: sas transport rphy object
318 * @port: sas transport wide/narrow port object
319 * @phy_list: _sas_phy list objects belonging to this port
322 struct list_head port_list
;
326 struct sas_identify remote_identify
;
327 struct sas_rphy
*rphy
;
328 struct sas_port
*port
;
329 struct list_head phy_list
;
333 * struct _sas_phy - phy information
334 * @port_siblings: list of phys belonging to a port
335 * @identify: phy identification
336 * @remote_identify: attached device identification
337 * @phy: sas transport phy object
338 * @phy_id: unique phy id
339 * @handle: device handle for this phy
340 * @attached_handle: device handle for attached device
343 struct list_head port_siblings
;
344 struct sas_identify identify
;
345 struct sas_identify remote_identify
;
353 * struct _sas_node - sas_host/expander information
354 * @list: list of expanders
355 * @parent_dev: parent device class
356 * @num_phys: number phys belonging to this sas_host/expander
357 * @sas_address: sas address of this sas_host/expander
358 * @handle: handle for this sas_host/expander
359 * @parent_handle: parent handle
360 * @enclosure_handle: handle for this a member of an enclosure
361 * @device_info: bitwise defining capabilities of this sas_host/expander
362 * @responding: used in _scsih_expander_device_mark_responding
363 * @phy: a list of phys that make up this sas_host/expander
364 * @sas_port_list: list of ports attached to this sas_host/expander
367 struct list_head list
;
368 struct device
*parent_dev
;
373 u16 enclosure_handle
;
374 u64 enclosure_logical_id
;
376 struct _sas_phy
*phy
;
377 struct list_head sas_port_list
;
381 * enum reset_type - reset state
382 * @FORCE_BIG_HAMMER: issue diagnostic reset
383 * @SOFT_RESET: issue message_unit_reset, if fails to to big hammer
391 * struct request_tracker - firmware request tracker
392 * @smid: system message id
393 * @scmd: scsi request pointer
394 * @cb_idx: callback index
395 * @chain_list: list of chains associated to this IO
396 * @tracker_list: list of free request (ioc->free_list)
398 struct request_tracker
{
400 struct scsi_cmnd
*scmd
;
402 struct list_head tracker_list
;
405 typedef void (*MPT_ADD_SGE
)(void *paddr
, u32 flags_length
, dma_addr_t dma_addr
);
408 * struct MPT2SAS_ADAPTER - per adapter struct
410 * @shost: shost object
411 * @id: unique adapter id
412 * @pci_irq: irq number
413 * @name: generic ioc string
414 * @tmp_string: tmp string used for logging
415 * @pdev: pci pdev object
416 * @chip: memory mapped register space
417 * @chip_phys: physical addrss prior to mapping
418 * @pio_chip: I/O mapped register space
419 * @logging_level: see mpt2sas_debug.h
420 * @ir_firmware: IR firmware present
421 * @bars: bitmask of BAR's that must be configured
422 * @mask_interrupts: ignore interrupt
423 * @fault_reset_work_q_name: fw fault work queue
424 * @fault_reset_work_q: ""
425 * @fault_reset_work: ""
426 * @firmware_event_name: fw event work queue
427 * @firmware_event_thread: ""
428 * @fw_events_off: flag to turn off fw event handling
430 * @fw_event_list: list of fw events
431 * @aen_event_read_flag: event log was read
432 * @broadcast_aen_busy: broadcast aen waiting to be serviced
433 * @ioc_reset_in_progress: host reset in progress
434 * @ioc_reset_in_progress_lock:
435 * @ioc_link_reset_in_progress: phy/hard reset in progress
436 * @ignore_loginfos: ignore loginfos during task managment
437 * @remove_host: flag for when driver unloads, to avoid sending dev resets
438 * @wait_for_port_enable_to_complete:
439 * @msix_enable: flag indicating msix is enabled
440 * @msix_vector_count: number msix vectors
441 * @msix_table: virt address to the msix table
442 * @msix_table_backup: backup msix table
443 * @scsi_io_cb_idx: shost generated commands
444 * @tm_cb_idx: task management commands
445 * @transport_cb_idx: transport internal commands
446 * @ctl_cb_idx: clt internal commands
447 * @base_cb_idx: base internal commands
448 * @config_cb_idx: base internal commands
454 * @base_add_sg_single: handler for either 32/64 bit sgl's
455 * @event_type: bits indicating which events to log
456 * @event_context: unique id for each logged event
457 * @event_log: event log pointer
458 * @event_masks: events that are masked
459 * @facts: static facts data
460 * @pfacts: static port facts data
461 * @manu_pg0: static manufacturing page 0
462 * @bios_pg2: static bios page 2
463 * @bios_pg3: static bios page 3
464 * @ioc_pg8: static ioc page 8
465 * @iounit_pg0: static iounit page 0
466 * @iounit_pg1: static iounit page 1
467 * @sas_hba: sas host object
468 * @sas_expander_list: expander object list
470 * @sas_device_list: sas device object list
471 * @sas_device_init_list: sas device object list (used only at init time)
473 * @io_missing_delay: time for IO completed by fw when PDR enabled
474 * @device_missing_delay: time for device missing by fw when PDR enabled
475 * @config_page_sz: config page size
476 * @config_page: reserve memory for config page payload
478 * @sge_size: sg element size for either 32/64 bit
479 * @request_depth: hba request queue depth
480 * @request_sz: per request frame size
481 * @request: pool of request frames
484 * @scsi_lookup: firmware request tracker list
486 * @free_list: free list of request
487 * @chain: pool of chains
491 * @max_sges_in_main_message: number sg elements in main message
492 * @max_sges_in_chain_message: number sg elements per chain
493 * @chains_needed_per_io: max chains per io
494 * @chain_offset_value_for_main_message: location 1st sg in main
495 * @chain_depth: total chains allocated
496 * @sense: pool of sense
499 * @reply_depth: hba reply queue depth:
500 * @reply_sz: per reply frame size:
501 * @reply: pool of replys:
504 * @reply_free_queue_depth: reply free depth
505 * @reply_free: pool for reply free queue (32 bit addr)
507 * @reply_free_dma_pool:
508 * @reply_free_host_index: tail index in pool to insert free replys
509 * @reply_post_queue_depth: reply post queue depth
510 * @reply_post_free: pool for reply post (64bit descriptor)
511 * @reply_post_free_dma:
512 * @reply_post_free_dma_pool:
513 * @reply_post_host_index: head index in the pool where FW completes IO
515 struct MPT2SAS_ADAPTER
{
516 struct list_head list
;
517 struct Scsi_Host
*shost
;
520 char name
[MPT_NAME_LENGTH
];
521 char tmp_string
[MPT_STRING_LENGTH
];
522 struct pci_dev
*pdev
;
523 Mpi2SystemInterfaceRegs_t __iomem
*chip
;
524 unsigned long chip_phys
;
525 unsigned long pio_chip
;
531 /* fw fault handler */
532 char fault_reset_work_q_name
[20];
533 struct workqueue_struct
*fault_reset_work_q
;
534 struct delayed_work fault_reset_work
;
536 /* fw event handler */
537 char firmware_event_name
[20];
538 struct workqueue_struct
*firmware_event_thread
;
540 spinlock_t fw_event_lock
;
541 struct list_head fw_event_list
;
544 int aen_event_read_flag
;
545 u8 broadcast_aen_busy
;
546 u8 ioc_reset_in_progress
;
548 spinlock_t ioc_reset_in_progress_lock
;
549 u8 ioc_link_reset_in_progress
;
552 u8 wait_for_port_enable_to_complete
;
555 u16 msix_vector_count
;
557 u32
*msix_table_backup
;
559 /* internal commands, callback index */
566 struct _internal_cmd base_cmds
;
567 struct _internal_cmd transport_cmds
;
568 struct _internal_cmd tm_cmds
;
569 struct _internal_cmd ctl_cmds
;
570 struct _internal_cmd config_cmds
;
572 MPT_ADD_SGE base_add_sg_single
;
575 u32 event_type
[MPI2_EVENT_NOTIFY_EVENTMASK_WORDS
];
578 u32 event_masks
[MPI2_EVENT_NOTIFY_EVENTMASK_WORDS
];
580 /* static config pages */
581 Mpi2IOCFactsReply_t facts
;
582 Mpi2PortFactsReply_t
*pfacts
;
583 Mpi2ManufacturingPage0_t manu_pg0
;
584 Mpi2BiosPage2_t bios_pg2
;
585 Mpi2BiosPage3_t bios_pg3
;
586 Mpi2IOCPage8_t ioc_pg8
;
587 Mpi2IOUnitPage0_t iounit_pg0
;
588 Mpi2IOUnitPage1_t iounit_pg1
;
590 struct _boot_device req_boot_device
;
591 struct _boot_device req_alt_boot_device
;
592 struct _boot_device current_boot_device
;
594 /* sas hba, expander, and device list */
595 struct _sas_node sas_hba
;
596 struct list_head sas_expander_list
;
597 spinlock_t sas_node_lock
;
598 struct list_head sas_device_list
;
599 struct list_head sas_device_init_list
;
600 spinlock_t sas_device_lock
;
601 struct list_head raid_device_list
;
602 spinlock_t raid_device_lock
;
604 u16 device_missing_delay
;
610 dma_addr_t config_page_dma
;
617 dma_addr_t request_dma
;
619 struct request_tracker
*scsi_lookup
;
620 spinlock_t scsi_lookup_lock
;
621 struct list_head free_list
;
622 int pending_io_count
;
623 wait_queue_head_t reset_wq
;
627 dma_addr_t chain_dma
;
628 u16 max_sges_in_main_message
;
629 u16 max_sges_in_chain_message
;
630 u16 chains_needed_per_io
;
631 u16 chain_offset_value_for_main_message
;
636 dma_addr_t sense_dma
;
637 struct dma_pool
*sense_dma_pool
;
642 dma_addr_t reply_dma
;
643 struct dma_pool
*reply_dma_pool
;
645 /* reply free queue */
646 u16 reply_free_queue_depth
;
648 dma_addr_t reply_free_dma
;
649 struct dma_pool
*reply_free_dma_pool
;
650 u32 reply_free_host_index
;
652 /* reply post queue */
653 u16 reply_post_queue_depth
;
654 Mpi2ReplyDescriptorsUnion_t
*reply_post_free
;
655 dma_addr_t reply_post_free_dma
;
656 struct dma_pool
*reply_post_free_dma_pool
;
657 u32 reply_post_host_index
;
659 /* diag buffer support */
660 u8
*diag_buffer
[MPI2_DIAG_BUF_TYPE_COUNT
];
661 u32 diag_buffer_sz
[MPI2_DIAG_BUF_TYPE_COUNT
];
662 dma_addr_t diag_buffer_dma
[MPI2_DIAG_BUF_TYPE_COUNT
];
663 u8 diag_buffer_status
[MPI2_DIAG_BUF_TYPE_COUNT
];
664 u32 unique_id
[MPI2_DIAG_BUF_TYPE_COUNT
];
665 u32 product_specific
[MPI2_DIAG_BUF_TYPE_COUNT
][23];
666 u32 diagnostic_flags
[MPI2_DIAG_BUF_TYPE_COUNT
];
669 typedef void (*MPT_CALLBACK
)(struct MPT2SAS_ADAPTER
*ioc
, u16 smid
, u8 VF_ID
,
673 /* base shared API */
674 extern struct list_head mpt2sas_ioc_list
;
676 int mpt2sas_base_attach(struct MPT2SAS_ADAPTER
*ioc
);
677 void mpt2sas_base_detach(struct MPT2SAS_ADAPTER
*ioc
);
678 int mpt2sas_base_map_resources(struct MPT2SAS_ADAPTER
*ioc
);
679 void mpt2sas_base_free_resources(struct MPT2SAS_ADAPTER
*ioc
);
680 int mpt2sas_base_hard_reset_handler(struct MPT2SAS_ADAPTER
*ioc
, int sleep_flag
,
681 enum reset_type type
);
683 void *mpt2sas_base_get_msg_frame(struct MPT2SAS_ADAPTER
*ioc
, u16 smid
);
684 void *mpt2sas_base_get_sense_buffer(struct MPT2SAS_ADAPTER
*ioc
, u16 smid
);
685 void mpt2sas_base_build_zero_len_sge(struct MPT2SAS_ADAPTER
*ioc
, void *paddr
);
686 dma_addr_t
mpt2sas_base_get_msg_frame_dma(struct MPT2SAS_ADAPTER
*ioc
, u16 smid
);
687 dma_addr_t
mpt2sas_base_get_sense_buffer_dma(struct MPT2SAS_ADAPTER
*ioc
, u16 smid
);
689 u16
mpt2sas_base_get_smid(struct MPT2SAS_ADAPTER
*ioc
, u8 cb_idx
);
690 void mpt2sas_base_free_smid(struct MPT2SAS_ADAPTER
*ioc
, u16 smid
);
691 void mpt2sas_base_put_smid_scsi_io(struct MPT2SAS_ADAPTER
*ioc
, u16 smid
, u8 vf_id
,
693 void mpt2sas_base_put_smid_hi_priority(struct MPT2SAS_ADAPTER
*ioc
, u16 smid
, u8 vf_id
);
694 void mpt2sas_base_put_smid_target_assist(struct MPT2SAS_ADAPTER
*ioc
, u16 smid
,
695 u8 vf_id
, u16 io_index
);
696 void mpt2sas_base_put_smid_default(struct MPT2SAS_ADAPTER
*ioc
, u16 smid
, u8 vf_id
);
697 void mpt2sas_base_initialize_callback_handler(void);
698 u8
mpt2sas_base_register_callback_handler(MPT_CALLBACK cb_func
);
699 void mpt2sas_base_release_callback_handler(u8 cb_idx
);
701 void mpt2sas_base_done(struct MPT2SAS_ADAPTER
*ioc
, u16 smid
, u8 VF_ID
, u32 reply
);
702 void *mpt2sas_base_get_reply_virt_addr(struct MPT2SAS_ADAPTER
*ioc
, u32 phys_addr
);
704 u32
mpt2sas_base_get_iocstate(struct MPT2SAS_ADAPTER
*ioc
, int cooked
);
706 void mpt2sas_base_fault_info(struct MPT2SAS_ADAPTER
*ioc
, u16 fault_code
);
707 int mpt2sas_base_sas_iounit_control(struct MPT2SAS_ADAPTER
*ioc
,
708 Mpi2SasIoUnitControlReply_t
*mpi_reply
, Mpi2SasIoUnitControlRequest_t
710 int mpt2sas_base_scsi_enclosure_processor(struct MPT2SAS_ADAPTER
*ioc
,
711 Mpi2SepReply_t
*mpi_reply
, Mpi2SepRequest_t
*mpi_request
);
712 void mpt2sas_base_validate_event_type(struct MPT2SAS_ADAPTER
*ioc
, u32
*event_type
);
714 /* scsih shared API */
715 void mpt2sas_scsih_issue_tm(struct MPT2SAS_ADAPTER
*ioc
, u16 handle
, uint lun
,
716 u8 type
, u16 smid_task
, ulong timeout
);
717 void mpt2sas_scsih_set_tm_flag(struct MPT2SAS_ADAPTER
*ioc
, u16 handle
);
718 void mpt2sas_scsih_clear_tm_flag(struct MPT2SAS_ADAPTER
*ioc
, u16 handle
);
719 struct _sas_node
*mpt2sas_scsih_expander_find_by_handle(struct MPT2SAS_ADAPTER
*ioc
,
721 struct _sas_node
*mpt2sas_scsih_expander_find_by_sas_address(struct MPT2SAS_ADAPTER
722 *ioc
, u64 sas_address
);
723 struct _sas_device
*mpt2sas_scsih_sas_device_find_by_sas_address(
724 struct MPT2SAS_ADAPTER
*ioc
, u64 sas_address
);
726 void mpt2sas_scsih_event_callback(struct MPT2SAS_ADAPTER
*ioc
, u8 VF_ID
, u32 reply
);
727 void mpt2sas_scsih_reset_handler(struct MPT2SAS_ADAPTER
*ioc
, int reset_phase
);
729 /* config shared API */
730 void mpt2sas_config_done(struct MPT2SAS_ADAPTER
*ioc
, u16 smid
, u8 VF_ID
, u32 reply
);
731 int mpt2sas_config_get_number_hba_phys(struct MPT2SAS_ADAPTER
*ioc
, u8
*num_phys
);
732 int mpt2sas_config_get_manufacturing_pg0(struct MPT2SAS_ADAPTER
*ioc
,
733 Mpi2ConfigReply_t
*mpi_reply
, Mpi2ManufacturingPage0_t
*config_page
);
734 int mpt2sas_config_get_bios_pg2(struct MPT2SAS_ADAPTER
*ioc
, Mpi2ConfigReply_t
735 *mpi_reply
, Mpi2BiosPage2_t
*config_page
);
736 int mpt2sas_config_get_bios_pg3(struct MPT2SAS_ADAPTER
*ioc
, Mpi2ConfigReply_t
737 *mpi_reply
, Mpi2BiosPage3_t
*config_page
);
738 int mpt2sas_config_get_iounit_pg0(struct MPT2SAS_ADAPTER
*ioc
, Mpi2ConfigReply_t
739 *mpi_reply
, Mpi2IOUnitPage0_t
*config_page
);
740 int mpt2sas_config_get_sas_device_pg0(struct MPT2SAS_ADAPTER
*ioc
, Mpi2ConfigReply_t
741 *mpi_reply
, Mpi2SasDevicePage0_t
*config_page
, u32 form
, u32 handle
);
742 int mpt2sas_config_get_sas_device_pg1(struct MPT2SAS_ADAPTER
*ioc
, Mpi2ConfigReply_t
743 *mpi_reply
, Mpi2SasDevicePage1_t
*config_page
, u32 form
, u32 handle
);
744 int mpt2sas_config_get_sas_iounit_pg0(struct MPT2SAS_ADAPTER
*ioc
, Mpi2ConfigReply_t
745 *mpi_reply
, Mpi2SasIOUnitPage0_t
*config_page
, u16 sz
);
746 int mpt2sas_config_get_iounit_pg1(struct MPT2SAS_ADAPTER
*ioc
, Mpi2ConfigReply_t
747 *mpi_reply
, Mpi2IOUnitPage1_t
*config_page
);
748 int mpt2sas_config_set_iounit_pg1(struct MPT2SAS_ADAPTER
*ioc
, Mpi2ConfigReply_t
749 *mpi_reply
, Mpi2IOUnitPage1_t config_page
);
750 int mpt2sas_config_get_sas_iounit_pg1(struct MPT2SAS_ADAPTER
*ioc
, Mpi2ConfigReply_t
751 *mpi_reply
, Mpi2SasIOUnitPage1_t
*config_page
, u16 sz
);
752 int mpt2sas_config_get_ioc_pg8(struct MPT2SAS_ADAPTER
*ioc
, Mpi2ConfigReply_t
753 *mpi_reply
, Mpi2IOCPage8_t
*config_page
);
754 int mpt2sas_config_get_expander_pg0(struct MPT2SAS_ADAPTER
*ioc
, Mpi2ConfigReply_t
755 *mpi_reply
, Mpi2ExpanderPage0_t
*config_page
, u32 form
, u32 handle
);
756 int mpt2sas_config_get_expander_pg1(struct MPT2SAS_ADAPTER
*ioc
, Mpi2ConfigReply_t
757 *mpi_reply
, Mpi2ExpanderPage1_t
*config_page
, u32 phy_number
, u16 handle
);
758 int mpt2sas_config_get_enclosure_pg0(struct MPT2SAS_ADAPTER
*ioc
, Mpi2ConfigReply_t
759 *mpi_reply
, Mpi2SasEnclosurePage0_t
*config_page
, u32 form
, u32 handle
);
760 int mpt2sas_config_get_phy_pg0(struct MPT2SAS_ADAPTER
*ioc
, Mpi2ConfigReply_t
761 *mpi_reply
, Mpi2SasPhyPage0_t
*config_page
, u32 phy_number
);
762 int mpt2sas_config_get_phy_pg1(struct MPT2SAS_ADAPTER
*ioc
, Mpi2ConfigReply_t
763 *mpi_reply
, Mpi2SasPhyPage1_t
*config_page
, u32 phy_number
);
764 int mpt2sas_config_get_raid_volume_pg1(struct MPT2SAS_ADAPTER
*ioc
, Mpi2ConfigReply_t
765 *mpi_reply
, Mpi2RaidVolPage1_t
*config_page
, u32 form
, u32 handle
);
766 int mpt2sas_config_get_number_pds(struct MPT2SAS_ADAPTER
*ioc
, u16 handle
, u8
*num_pds
);
767 int mpt2sas_config_get_raid_volume_pg0(struct MPT2SAS_ADAPTER
*ioc
, Mpi2ConfigReply_t
768 *mpi_reply
, Mpi2RaidVolPage0_t
*config_page
, u32 form
, u32 handle
, u16 sz
);
769 int mpt2sas_config_get_phys_disk_pg0(struct MPT2SAS_ADAPTER
*ioc
, Mpi2ConfigReply_t
770 *mpi_reply
, Mpi2RaidPhysDiskPage0_t
*config_page
, u32 form
,
772 int mpt2sas_config_get_volume_handle(struct MPT2SAS_ADAPTER
*ioc
, u16 pd_handle
,
774 int mpt2sas_config_get_volume_wwid(struct MPT2SAS_ADAPTER
*ioc
, u16 volume_handle
,
778 extern struct device_attribute
*mpt2sas_host_attrs
[];
779 extern struct device_attribute
*mpt2sas_dev_attrs
[];
780 void mpt2sas_ctl_init(void);
781 void mpt2sas_ctl_exit(void);
782 void mpt2sas_ctl_done(struct MPT2SAS_ADAPTER
*ioc
, u16 smid
, u8 VF_ID
, u32 reply
);
783 void mpt2sas_ctl_reset_handler(struct MPT2SAS_ADAPTER
*ioc
, int reset_phase
);
784 void mpt2sas_ctl_event_callback(struct MPT2SAS_ADAPTER
*ioc
, u8 VF_ID
, u32 reply
);
785 void mpt2sas_ctl_add_to_event_log(struct MPT2SAS_ADAPTER
*ioc
,
786 Mpi2EventNotificationReply_t
*mpi_reply
);
788 /* transport shared API */
789 void mpt2sas_transport_done(struct MPT2SAS_ADAPTER
*ioc
, u16 smid
, u8 VF_ID
, u32 reply
);
790 struct _sas_port
*mpt2sas_transport_port_add(struct MPT2SAS_ADAPTER
*ioc
,
791 u16 handle
, u16 parent_handle
);
792 void mpt2sas_transport_port_remove(struct MPT2SAS_ADAPTER
*ioc
, u64 sas_address
,
794 int mpt2sas_transport_add_host_phy(struct MPT2SAS_ADAPTER
*ioc
, struct _sas_phy
795 *mpt2sas_phy
, Mpi2SasPhyPage0_t phy_pg0
, struct device
*parent_dev
);
796 int mpt2sas_transport_add_expander_phy(struct MPT2SAS_ADAPTER
*ioc
, struct _sas_phy
797 *mpt2sas_phy
, Mpi2ExpanderPage1_t expander_pg1
, struct device
*parent_dev
);
798 void mpt2sas_transport_update_phy_link_change(struct MPT2SAS_ADAPTER
*ioc
, u16 handle
,
799 u16 attached_handle
, u8 phy_number
, u8 link_rate
);
800 extern struct sas_function_template mpt2sas_transport_functions
;
801 extern struct scsi_transport_template
*mpt2sas_transport_template
;
803 #endif /* MPT2SAS_BASE_H_INCLUDED */