projects / deliverable / linux.git / blob
? search:
summary | shortlog | log | commit | commitdiff | tree
blame | history | raw | HEAD
Staging: Merge branch 'tidspbridge-for-2.6.39' of git://dev.omapzoom.org/pub/scm...
[deliverable/linux.git] / drivers / scsi / mpt2sas / mpt2sas_scsih.c
1 /*
2 * Scsi Host Layer for MPT (Message Passing Technology) based controllers
3 *
4 * This code is based on drivers/scsi/mpt2sas/mpt2_scsih.c
5 * Copyright (C) 2007-2010 LSI Corporation
6 * (mailto:DL-MPTFusionLinux@lsi.com)
7 *
8 * This program is free software; you can redistribute it and/or
9 * modify it under the terms of the GNU General Public License
10 * as published by the Free Software Foundation; either version 2
11 * of the License, or (at your option) any later version.
12 *
13 * This program is distributed in the hope that it will be useful,
14 * but WITHOUT ANY WARRANTY; without even the implied warranty of
15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16 * GNU General Public License for more details.
17 *
18 * NO WARRANTY
19 * THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR
20 * CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT
21 * LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT,
22 * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is
23 * solely responsible for determining the appropriateness of using and
24 * distributing the Program and assumes all risks associated with its
25 * exercise of rights under this Agreement, including but not limited to
26 * the risks and costs of program errors, damage to or loss of data,
27 * programs or equipment, and unavailability or interruption of operations.
28
29 * DISCLAIMER OF LIABILITY
30 * NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY
31 * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
32 * DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND
33 * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
34 * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
35 * USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED
36 * HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES
37
38 * You should have received a copy of the GNU General Public License
39 * along with this program; if not, write to the Free Software
40 * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301,
41 * USA.
42 */
43
44 #include <linux/version.h>
45 #include <linux/module.h>
46 #include <linux/kernel.h>
47 #include <linux/init.h>
48 #include <linux/errno.h>
49 #include <linux/blkdev.h>
50 #include <linux/sched.h>
51 #include <linux/workqueue.h>
52 #include <linux/delay.h>
53 #include <linux/pci.h>
54 #include <linux/interrupt.h>
55 #include <linux/aer.h>
56 #include <linux/raid_class.h>
57 #include <linux/slab.h>
58
59 #include "mpt2sas_base.h"
60
61 MODULE_AUTHOR(MPT2SAS_AUTHOR);
62 MODULE_DESCRIPTION(MPT2SAS_DESCRIPTION);
63 MODULE_LICENSE("GPL");
64 MODULE_VERSION(MPT2SAS_DRIVER_VERSION);
65
66 #define RAID_CHANNEL 1
67
68 /* forward proto's */
69 static void _scsih_expander_node_remove(struct MPT2SAS_ADAPTER *ioc,
70 struct _sas_node *sas_expander);
71 static void _firmware_event_work(struct work_struct *work);
72
73 static u8 _scsih_check_for_pending_tm(struct MPT2SAS_ADAPTER *ioc, u16 smid);
74
75 /* global parameters */
76 LIST_HEAD(mpt2sas_ioc_list);
77
78 /* local parameters */
79 static u8 scsi_io_cb_idx = -1;
80 static u8 tm_cb_idx = -1;
81 static u8 ctl_cb_idx = -1;
82 static u8 base_cb_idx = -1;
83 static u8 transport_cb_idx = -1;
84 static u8 scsih_cb_idx = -1;
85 static u8 config_cb_idx = -1;
86 static int mpt_ids;
87
88 static u8 tm_tr_cb_idx = -1 ;
89 static u8 tm_tr_volume_cb_idx = -1 ;
90 static u8 tm_sas_control_cb_idx = -1;
91
92 /* command line options */
93 static u32 logging_level;
94 MODULE_PARM_DESC(logging_level, " bits for enabling additional logging info "
95 "(default=0)");
96
97 /* scsi-mid layer global parmeter is max_report_luns, which is 511 */
98 #define MPT2SAS_MAX_LUN (16895)
99 static int max_lun = MPT2SAS_MAX_LUN;
100 module_param(max_lun, int, 0);
101 MODULE_PARM_DESC(max_lun, " max lun, default=16895 ");
102
103 /**
104 * struct sense_info - common structure for obtaining sense keys
105 * @skey: sense key
106 * @asc: additional sense code
107 * @ascq: additional sense code qualifier
108 */
109 struct sense_info {
110 u8 skey;
111 u8 asc;
112 u8 ascq;
113 };
114
115
116 #define MPT2SAS_RESCAN_AFTER_HOST_RESET (0xFFFF)
117
118 /**
119 * struct fw_event_work - firmware event struct
120 * @list: link list framework
121 * @work: work object (ioc->fault_reset_work_q)
122 * @cancel_pending_work: flag set during reset handling
123 * @ioc: per adapter object
124 * @VF_ID: virtual function id
125 * @VP_ID: virtual port id
126 * @ignore: flag meaning this event has been marked to ignore
127 * @event: firmware event MPI2_EVENT_XXX defined in mpt2_ioc.h
128 * @event_data: reply event data payload follows
129 *
130 * This object stored on ioc->fw_event_list.
131 */
132 struct fw_event_work {
133 struct list_head list;
134 u8 cancel_pending_work;
135 struct delayed_work delayed_work;
136 struct MPT2SAS_ADAPTER *ioc;
137 u8 VF_ID;
138 u8 VP_ID;
139 u8 ignore;
140 u16 event;
141 void *event_data;
142 };
143
144 /* raid transport support */
145 static struct raid_template *mpt2sas_raid_template;
146
147 /**
148 * struct _scsi_io_transfer - scsi io transfer
149 * @handle: sas device handle (assigned by firmware)
150 * @is_raid: flag set for hidden raid components
151 * @dir: DMA_TO_DEVICE, DMA_FROM_DEVICE,
152 * @data_length: data transfer length
153 * @data_dma: dma pointer to data
154 * @sense: sense data
155 * @lun: lun number
156 * @cdb_length: cdb length
157 * @cdb: cdb contents
158 * @timeout: timeout for this command
159 * @VF_ID: virtual function id
160 * @VP_ID: virtual port id
161 * @valid_reply: flag set for reply message
162 * @sense_length: sense length
163 * @ioc_status: ioc status
164 * @scsi_state: scsi state
165 * @scsi_status: scsi staus
166 * @log_info: log information
167 * @transfer_length: data length transfer when there is a reply message
168 *
169 * Used for sending internal scsi commands to devices within this module.
170 * Refer to _scsi_send_scsi_io().
171 */
172 struct _scsi_io_transfer {
173 u16 handle;
174 u8 is_raid;
175 enum dma_data_direction dir;
176 u32 data_length;
177 dma_addr_t data_dma;
178 u8 sense[SCSI_SENSE_BUFFERSIZE];
179 u32 lun;
180 u8 cdb_length;
181 u8 cdb[32];
182 u8 timeout;
183 u8 VF_ID;
184 u8 VP_ID;
185 u8 valid_reply;
186 /* the following bits are only valid when 'valid_reply = 1' */
187 u32 sense_length;
188 u16 ioc_status;
189 u8 scsi_state;
190 u8 scsi_status;
191 u32 log_info;
192 u32 transfer_length;
193 };
194
195 /*
196 * The pci device ids are defined in mpi/mpi2_cnfg.h.
197 */
198 static struct pci_device_id scsih_pci_table[] = {
199 { MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2004,
200 PCI_ANY_ID, PCI_ANY_ID },
201 /* Falcon ~ 2008*/
202 { MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2008,
203 PCI_ANY_ID, PCI_ANY_ID },
204 /* Liberator ~ 2108 */
205 { MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2108_1,
206 PCI_ANY_ID, PCI_ANY_ID },
207 { MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2108_2,
208 PCI_ANY_ID, PCI_ANY_ID },
209 { MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2108_3,
210 PCI_ANY_ID, PCI_ANY_ID },
211 /* Meteor ~ 2116 */
212 { MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2116_1,
213 PCI_ANY_ID, PCI_ANY_ID },
214 { MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2116_2,
215 PCI_ANY_ID, PCI_ANY_ID },
216 /* Thunderbolt ~ 2208 */
217 { MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2208_1,
218 PCI_ANY_ID, PCI_ANY_ID },
219 { MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2208_2,
220 PCI_ANY_ID, PCI_ANY_ID },
221 { MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2208_3,
222 PCI_ANY_ID, PCI_ANY_ID },
223 { MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2208_4,
224 PCI_ANY_ID, PCI_ANY_ID },
225 { MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2208_5,
226 PCI_ANY_ID, PCI_ANY_ID },
227 { MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2208_6,
228 PCI_ANY_ID, PCI_ANY_ID },
229 /* Mustang ~ 2308 */
230 { MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2308_1,
231 PCI_ANY_ID, PCI_ANY_ID },
232 { MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2308_2,
233 PCI_ANY_ID, PCI_ANY_ID },
234 { MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2308_3,
235 PCI_ANY_ID, PCI_ANY_ID },
236 {0} /* Terminating entry */
237 };
238 MODULE_DEVICE_TABLE(pci, scsih_pci_table);
239
240 /**
241 * _scsih_set_debug_level - global setting of ioc->logging_level.
242 *
243 * Note: The logging levels are defined in mpt2sas_debug.h.
244 */
245 static int
246 _scsih_set_debug_level(const char *val, struct kernel_param *kp)
247 {
248 int ret = param_set_int(val, kp);
249 struct MPT2SAS_ADAPTER *ioc;
250
251 if (ret)
252 return ret;
253
254 printk(KERN_INFO "setting logging_level(0x%08x)\n", logging_level);
255 list_for_each_entry(ioc, &mpt2sas_ioc_list, list)
256 ioc->logging_level = logging_level;
257 return 0;
258 }
259 module_param_call(logging_level, _scsih_set_debug_level, param_get_int,
260 &logging_level, 0644);
261
262 /**
263 * _scsih_srch_boot_sas_address - search based on sas_address
264 * @sas_address: sas address
265 * @boot_device: boot device object from bios page 2
266 *
267 * Returns 1 when there's a match, 0 means no match.
268 */
269 static inline int
270 _scsih_srch_boot_sas_address(u64 sas_address,
271 Mpi2BootDeviceSasWwid_t *boot_device)
272 {
273 return (sas_address == le64_to_cpu(boot_device->SASAddress)) ? 1 : 0;
274 }
275
276 /**
277 * _scsih_srch_boot_device_name - search based on device name
278 * @device_name: device name specified in INDENTIFY fram
279 * @boot_device: boot device object from bios page 2
280 *
281 * Returns 1 when there's a match, 0 means no match.
282 */
283 static inline int
284 _scsih_srch_boot_device_name(u64 device_name,
285 Mpi2BootDeviceDeviceName_t *boot_device)
286 {
287 return (device_name == le64_to_cpu(boot_device->DeviceName)) ? 1 : 0;
288 }
289
290 /**
291 * _scsih_srch_boot_encl_slot - search based on enclosure_logical_id/slot
292 * @enclosure_logical_id: enclosure logical id
293 * @slot_number: slot number
294 * @boot_device: boot device object from bios page 2
295 *
296 * Returns 1 when there's a match, 0 means no match.
297 */
298 static inline int
299 _scsih_srch_boot_encl_slot(u64 enclosure_logical_id, u16 slot_number,
300 Mpi2BootDeviceEnclosureSlot_t *boot_device)
301 {
302 return (enclosure_logical_id == le64_to_cpu(boot_device->
303 EnclosureLogicalID) && slot_number == le16_to_cpu(boot_device->
304 SlotNumber)) ? 1 : 0;
305 }
306
307 /**
308 * _scsih_is_boot_device - search for matching boot device.
309 * @sas_address: sas address
310 * @device_name: device name specified in INDENTIFY fram
311 * @enclosure_logical_id: enclosure logical id
312 * @slot_number: slot number
313 * @form: specifies boot device form
314 * @boot_device: boot device object from bios page 2
315 *
316 * Returns 1 when there's a match, 0 means no match.
317 */
318 static int
319 _scsih_is_boot_device(u64 sas_address, u64 device_name,
320 u64 enclosure_logical_id, u16 slot, u8 form,
321 Mpi2BiosPage2BootDevice_t *boot_device)
322 {
323 int rc = 0;
324
325 switch (form) {
326 case MPI2_BIOSPAGE2_FORM_SAS_WWID:
327 if (!sas_address)
328 break;
329 rc = _scsih_srch_boot_sas_address(
330 sas_address, &boot_device->SasWwid);
331 break;
332 case MPI2_BIOSPAGE2_FORM_ENCLOSURE_SLOT:
333 if (!enclosure_logical_id)
334 break;
335 rc = _scsih_srch_boot_encl_slot(
336 enclosure_logical_id,
337 slot, &boot_device->EnclosureSlot);
338 break;
339 case MPI2_BIOSPAGE2_FORM_DEVICE_NAME:
340 if (!device_name)
341 break;
342 rc = _scsih_srch_boot_device_name(
343 device_name, &boot_device->DeviceName);
344 break;
345 case MPI2_BIOSPAGE2_FORM_NO_DEVICE_SPECIFIED:
346 break;
347 }
348
349 return rc;
350 }
351
352 /**
353 * _scsih_get_sas_address - set the sas_address for given device handle
354 * @handle: device handle
355 * @sas_address: sas address
356 *
357 * Returns 0 success, non-zero when failure
358 */
359 static int
360 _scsih_get_sas_address(struct MPT2SAS_ADAPTER *ioc, u16 handle,
361 u64 *sas_address)
362 {
363 Mpi2SasDevicePage0_t sas_device_pg0;
364 Mpi2ConfigReply_t mpi_reply;
365 u32 ioc_status;
366
367 if (handle <= ioc->sas_hba.num_phys) {
368 *sas_address = ioc->sas_hba.sas_address;
369 return 0;
370 } else
371 *sas_address = 0;
372
373 if ((mpt2sas_config_get_sas_device_pg0(ioc, &mpi_reply, &sas_device_pg0,
374 MPI2_SAS_DEVICE_PGAD_FORM_HANDLE, handle))) {
375 printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
376 ioc->name, __FILE__, __LINE__, __func__);
377 return -ENXIO;
378 }
379
380 ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
381 MPI2_IOCSTATUS_MASK;
382 if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
383 printk(MPT2SAS_ERR_FMT "handle(0x%04x), ioc_status(0x%04x)"
384 "\nfailure at %s:%d/%s()!\n", ioc->name, handle, ioc_status,
385 __FILE__, __LINE__, __func__);
386 return -EIO;
387 }
388
389 *sas_address = le64_to_cpu(sas_device_pg0.SASAddress);
390 return 0;
391 }
392
393 /**
394 * _scsih_determine_boot_device - determine boot device.
395 * @ioc: per adapter object
396 * @device: either sas_device or raid_device object
397 * @is_raid: [flag] 1 = raid object, 0 = sas object
398 *
399 * Determines whether this device should be first reported device to
400 * to scsi-ml or sas transport, this purpose is for persistant boot device.
401 * There are primary, alternate, and current entries in bios page 2. The order
402 * priority is primary, alternate, then current. This routine saves
403 * the corresponding device object and is_raid flag in the ioc object.
404 * The saved data to be used later in _scsih_probe_boot_devices().
405 */
406 static void
407 _scsih_determine_boot_device(struct MPT2SAS_ADAPTER *ioc,
408 void *device, u8 is_raid)
409 {
410 struct _sas_device *sas_device;
411 struct _raid_device *raid_device;
412 u64 sas_address;
413 u64 device_name;
414 u64 enclosure_logical_id;
415 u16 slot;
416
417 /* only process this function when driver loads */
418 if (!ioc->wait_for_port_enable_to_complete)
419 return;
420
421 if (!is_raid) {
422 sas_device = device;
423 sas_address = sas_device->sas_address;
424 device_name = sas_device->device_name;
425 enclosure_logical_id = sas_device->enclosure_logical_id;
426 slot = sas_device->slot;
427 } else {
428 raid_device = device;
429 sas_address = raid_device->wwid;
430 device_name = 0;
431 enclosure_logical_id = 0;
432 slot = 0;
433 }
434
435 if (!ioc->req_boot_device.device) {
436 if (_scsih_is_boot_device(sas_address, device_name,
437 enclosure_logical_id, slot,
438 (ioc->bios_pg2.ReqBootDeviceForm &
439 MPI2_BIOSPAGE2_FORM_MASK),
440 &ioc->bios_pg2.RequestedBootDevice)) {
441 dinitprintk(ioc, printk(MPT2SAS_INFO_FMT
442 "%s: req_boot_device(0x%016llx)\n",
443 ioc->name, __func__,
444 (unsigned long long)sas_address));
445 ioc->req_boot_device.device = device;
446 ioc->req_boot_device.is_raid = is_raid;
447 }
448 }
449
450 if (!ioc->req_alt_boot_device.device) {
451 if (_scsih_is_boot_device(sas_address, device_name,
452 enclosure_logical_id, slot,
453 (ioc->bios_pg2.ReqAltBootDeviceForm &
454 MPI2_BIOSPAGE2_FORM_MASK),
455 &ioc->bios_pg2.RequestedAltBootDevice)) {
456 dinitprintk(ioc, printk(MPT2SAS_INFO_FMT
457 "%s: req_alt_boot_device(0x%016llx)\n",
458 ioc->name, __func__,
459 (unsigned long long)sas_address));
460 ioc->req_alt_boot_device.device = device;
461 ioc->req_alt_boot_device.is_raid = is_raid;
462 }
463 }
464
465 if (!ioc->current_boot_device.device) {
466 if (_scsih_is_boot_device(sas_address, device_name,
467 enclosure_logical_id, slot,
468 (ioc->bios_pg2.CurrentBootDeviceForm &
469 MPI2_BIOSPAGE2_FORM_MASK),
470 &ioc->bios_pg2.CurrentBootDevice)) {
471 dinitprintk(ioc, printk(MPT2SAS_INFO_FMT
472 "%s: current_boot_device(0x%016llx)\n",
473 ioc->name, __func__,
474 (unsigned long long)sas_address));
475 ioc->current_boot_device.device = device;
476 ioc->current_boot_device.is_raid = is_raid;
477 }
478 }
479 }
480
481 /**
482 * mpt2sas_scsih_sas_device_find_by_sas_address - sas device search
483 * @ioc: per adapter object
484 * @sas_address: sas address
485 * Context: Calling function should acquire ioc->sas_device_lock
486 *
487 * This searches for sas_device based on sas_address, then return sas_device
488 * object.
489 */
490 struct _sas_device *
491 mpt2sas_scsih_sas_device_find_by_sas_address(struct MPT2SAS_ADAPTER *ioc,
492 u64 sas_address)
493 {
494 struct _sas_device *sas_device;
495
496 list_for_each_entry(sas_device, &ioc->sas_device_list, list)
497 if (sas_device->sas_address == sas_address)
498 return sas_device;
499
500 list_for_each_entry(sas_device, &ioc->sas_device_init_list, list)
501 if (sas_device->sas_address == sas_address)
502 return sas_device;
503
504 return NULL;
505 }
506
507 /**
508 * _scsih_sas_device_find_by_handle - sas device search
509 * @ioc: per adapter object
510 * @handle: sas device handle (assigned by firmware)
511 * Context: Calling function should acquire ioc->sas_device_lock
512 *
513 * This searches for sas_device based on sas_address, then return sas_device
514 * object.
515 */
516 static struct _sas_device *
517 _scsih_sas_device_find_by_handle(struct MPT2SAS_ADAPTER *ioc, u16 handle)
518 {
519 struct _sas_device *sas_device;
520
521 list_for_each_entry(sas_device, &ioc->sas_device_list, list)
522 if (sas_device->handle == handle)
523 return sas_device;
524
525 list_for_each_entry(sas_device, &ioc->sas_device_init_list, list)
526 if (sas_device->handle == handle)
527 return sas_device;
528
529 return NULL;
530 }
531
532 /**
533 * _scsih_sas_device_remove - remove sas_device from list.
534 * @ioc: per adapter object
535 * @sas_device: the sas_device object
536 * Context: This function will acquire ioc->sas_device_lock.
537 *
538 * Removing object and freeing associated memory from the ioc->sas_device_list.
539 */
540 static void
541 _scsih_sas_device_remove(struct MPT2SAS_ADAPTER *ioc,
542 struct _sas_device *sas_device)
543 {
544 unsigned long flags;
545
546 if (!sas_device)
547 return;
548
549 spin_lock_irqsave(&ioc->sas_device_lock, flags);
550 if (mpt2sas_scsih_sas_device_find_by_sas_address(ioc,
551 sas_device->sas_address)) {
552 list_del(&sas_device->list);
553 kfree(sas_device);
554 }
555 spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
556 }
557
558 /**
559 * _scsih_sas_device_add - insert sas_device to the list.
560 * @ioc: per adapter object
561 * @sas_device: the sas_device object
562 * Context: This function will acquire ioc->sas_device_lock.
563 *
564 * Adding new object to the ioc->sas_device_list.
565 */
566 static void
567 _scsih_sas_device_add(struct MPT2SAS_ADAPTER *ioc,
568 struct _sas_device *sas_device)
569 {
570 unsigned long flags;
571
572 dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: handle"
573 "(0x%04x), sas_addr(0x%016llx)\n", ioc->name, __func__,
574 sas_device->handle, (unsigned long long)sas_device->sas_address));
575
576 spin_lock_irqsave(&ioc->sas_device_lock, flags);
577 list_add_tail(&sas_device->list, &ioc->sas_device_list);
578 spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
579
580 if (!mpt2sas_transport_port_add(ioc, sas_device->handle,
581 sas_device->sas_address_parent))
582 _scsih_sas_device_remove(ioc, sas_device);
583 }
584
585 /**
586 * _scsih_sas_device_init_add - insert sas_device to the list.
587 * @ioc: per adapter object
588 * @sas_device: the sas_device object
589 * Context: This function will acquire ioc->sas_device_lock.
590 *
591 * Adding new object at driver load time to the ioc->sas_device_init_list.
592 */
593 static void
594 _scsih_sas_device_init_add(struct MPT2SAS_ADAPTER *ioc,
595 struct _sas_device *sas_device)
596 {
597 unsigned long flags;
598
599 dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: handle"
600 "(0x%04x), sas_addr(0x%016llx)\n", ioc->name, __func__,
601 sas_device->handle, (unsigned long long)sas_device->sas_address));
602
603 spin_lock_irqsave(&ioc->sas_device_lock, flags);
604 list_add_tail(&sas_device->list, &ioc->sas_device_init_list);
605 spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
606 _scsih_determine_boot_device(ioc, sas_device, 0);
607 }
608
609 /**
610 * _scsih_raid_device_find_by_id - raid device search
611 * @ioc: per adapter object
612 * @id: sas device target id
613 * @channel: sas device channel
614 * Context: Calling function should acquire ioc->raid_device_lock
615 *
616 * This searches for raid_device based on target id, then return raid_device
617 * object.
618 */
619 static struct _raid_device *
620 _scsih_raid_device_find_by_id(struct MPT2SAS_ADAPTER *ioc, int id, int channel)
621 {
622 struct _raid_device *raid_device, *r;
623
624 r = NULL;
625 list_for_each_entry(raid_device, &ioc->raid_device_list, list) {
626 if (raid_device->id == id && raid_device->channel == channel) {
627 r = raid_device;
628 goto out;
629 }
630 }
631
632 out:
633 return r;
634 }
635
636 /**
637 * _scsih_raid_device_find_by_handle - raid device search
638 * @ioc: per adapter object
639 * @handle: sas device handle (assigned by firmware)
640 * Context: Calling function should acquire ioc->raid_device_lock
641 *
642 * This searches for raid_device based on handle, then return raid_device
643 * object.
644 */
645 static struct _raid_device *
646 _scsih_raid_device_find_by_handle(struct MPT2SAS_ADAPTER *ioc, u16 handle)
647 {
648 struct _raid_device *raid_device, *r;
649
650 r = NULL;
651 list_for_each_entry(raid_device, &ioc->raid_device_list, list) {
652 if (raid_device->handle != handle)
653 continue;
654 r = raid_device;
655 goto out;
656 }
657
658 out:
659 return r;
660 }
661
662 /**
663 * _scsih_raid_device_find_by_wwid - raid device search
664 * @ioc: per adapter object
665 * @handle: sas device handle (assigned by firmware)
666 * Context: Calling function should acquire ioc->raid_device_lock
667 *
668 * This searches for raid_device based on wwid, then return raid_device
669 * object.
670 */
671 static struct _raid_device *
672 _scsih_raid_device_find_by_wwid(struct MPT2SAS_ADAPTER *ioc, u64 wwid)
673 {
674 struct _raid_device *raid_device, *r;
675
676 r = NULL;
677 list_for_each_entry(raid_device, &ioc->raid_device_list, list) {
678 if (raid_device->wwid != wwid)
679 continue;
680 r = raid_device;
681 goto out;
682 }
683
684 out:
685 return r;
686 }
687
688 /**
689 * _scsih_raid_device_add - add raid_device object
690 * @ioc: per adapter object
691 * @raid_device: raid_device object
692 *
693 * This is added to the raid_device_list link list.
694 */
695 static void
696 _scsih_raid_device_add(struct MPT2SAS_ADAPTER *ioc,
697 struct _raid_device *raid_device)
698 {
699 unsigned long flags;
700
701 dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: handle"
702 "(0x%04x), wwid(0x%016llx)\n", ioc->name, __func__,
703 raid_device->handle, (unsigned long long)raid_device->wwid));
704
705 spin_lock_irqsave(&ioc->raid_device_lock, flags);
706 list_add_tail(&raid_device->list, &ioc->raid_device_list);
707 spin_unlock_irqrestore(&ioc->raid_device_lock, flags);
708 }
709
710 /**
711 * _scsih_raid_device_remove - delete raid_device object
712 * @ioc: per adapter object
713 * @raid_device: raid_device object
714 *
715 * This is removed from the raid_device_list link list.
716 */
717 static void
718 _scsih_raid_device_remove(struct MPT2SAS_ADAPTER *ioc,
719 struct _raid_device *raid_device)
720 {
721 unsigned long flags;
722
723 spin_lock_irqsave(&ioc->raid_device_lock, flags);
724 list_del(&raid_device->list);
725 memset(raid_device, 0, sizeof(struct _raid_device));
726 kfree(raid_device);
727 spin_unlock_irqrestore(&ioc->raid_device_lock, flags);
728 }
729
730 /**
731 * mpt2sas_scsih_expander_find_by_handle - expander device search
732 * @ioc: per adapter object
733 * @handle: expander handle (assigned by firmware)
734 * Context: Calling function should acquire ioc->sas_device_lock
735 *
736 * This searches for expander device based on handle, then returns the
737 * sas_node object.
738 */
739 struct _sas_node *
740 mpt2sas_scsih_expander_find_by_handle(struct MPT2SAS_ADAPTER *ioc, u16 handle)
741 {
742 struct _sas_node *sas_expander, *r;
743
744 r = NULL;
745 list_for_each_entry(sas_expander, &ioc->sas_expander_list, list) {
746 if (sas_expander->handle != handle)
747 continue;
748 r = sas_expander;
749 goto out;
750 }
751 out:
752 return r;
753 }
754
755 /**
756 * mpt2sas_scsih_expander_find_by_sas_address - expander device search
757 * @ioc: per adapter object
758 * @sas_address: sas address
759 * Context: Calling function should acquire ioc->sas_node_lock.
760 *
761 * This searches for expander device based on sas_address, then returns the
762 * sas_node object.
763 */
764 struct _sas_node *
765 mpt2sas_scsih_expander_find_by_sas_address(struct MPT2SAS_ADAPTER *ioc,
766 u64 sas_address)
767 {
768 struct _sas_node *sas_expander, *r;
769
770 r = NULL;
771 list_for_each_entry(sas_expander, &ioc->sas_expander_list, list) {
772 if (sas_expander->sas_address != sas_address)
773 continue;
774 r = sas_expander;
775 goto out;
776 }
777 out:
778 return r;
779 }
780
781 /**
782 * _scsih_expander_node_add - insert expander device to the list.
783 * @ioc: per adapter object
784 * @sas_expander: the sas_device object
785 * Context: This function will acquire ioc->sas_node_lock.
786 *
787 * Adding new object to the ioc->sas_expander_list.
788 *
789 * Return nothing.
790 */
791 static void
792 _scsih_expander_node_add(struct MPT2SAS_ADAPTER *ioc,
793 struct _sas_node *sas_expander)
794 {
795 unsigned long flags;
796
797 spin_lock_irqsave(&ioc->sas_node_lock, flags);
798 list_add_tail(&sas_expander->list, &ioc->sas_expander_list);
799 spin_unlock_irqrestore(&ioc->sas_node_lock, flags);
800 }
801
802 /**
803 * _scsih_is_end_device - determines if device is an end device
804 * @device_info: bitfield providing information about the device.
805 * Context: none
806 *
807 * Returns 1 if end device.
808 */
809 static int
810 _scsih_is_end_device(u32 device_info)
811 {
812 if (device_info & MPI2_SAS_DEVICE_INFO_END_DEVICE &&
813 ((device_info & MPI2_SAS_DEVICE_INFO_SSP_TARGET) |
814 (device_info & MPI2_SAS_DEVICE_INFO_STP_TARGET) |
815 (device_info & MPI2_SAS_DEVICE_INFO_SATA_DEVICE)))
816 return 1;
817 else
818 return 0;
819 }
820
821 /**
822 * mptscsih_get_scsi_lookup - returns scmd entry
823 * @ioc: per adapter object
824 * @smid: system request message index
825 *
826 * Returns the smid stored scmd pointer.
827 */
828 static struct scsi_cmnd *
829 _scsih_scsi_lookup_get(struct MPT2SAS_ADAPTER *ioc, u16 smid)
830 {
831 return ioc->scsi_lookup[smid - 1].scmd;
832 }
833
834 /**
835 * _scsih_scsi_lookup_find_by_scmd - scmd lookup
836 * @ioc: per adapter object
837 * @smid: system request message index
838 * @scmd: pointer to scsi command object
839 * Context: This function will acquire ioc->scsi_lookup_lock.
840 *
841 * This will search for a scmd pointer in the scsi_lookup array,
842 * returning the revelent smid. A returned value of zero means invalid.
843 */
844 static u16
845 _scsih_scsi_lookup_find_by_scmd(struct MPT2SAS_ADAPTER *ioc, struct scsi_cmnd
846 *scmd)
847 {
848 u16 smid;
849 unsigned long flags;
850 int i;
851
852 spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
853 smid = 0;
854 for (i = 0; i < ioc->scsiio_depth; i++) {
855 if (ioc->scsi_lookup[i].scmd == scmd) {
856 smid = ioc->scsi_lookup[i].smid;
857 goto out;
858 }
859 }
860 out:
861 spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
862 return smid;
863 }
864
865 /**
866 * _scsih_scsi_lookup_find_by_target - search for matching channel:id
867 * @ioc: per adapter object
868 * @id: target id
869 * @channel: channel
870 * Context: This function will acquire ioc->scsi_lookup_lock.
871 *
872 * This will search for a matching channel:id in the scsi_lookup array,
873 * returning 1 if found.
874 */
875 static u8
876 _scsih_scsi_lookup_find_by_target(struct MPT2SAS_ADAPTER *ioc, int id,
877 int channel)
878 {
879 u8 found;
880 unsigned long flags;
881 int i;
882
883 spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
884 found = 0;
885 for (i = 0 ; i < ioc->scsiio_depth; i++) {
886 if (ioc->scsi_lookup[i].scmd &&
887 (ioc->scsi_lookup[i].scmd->device->id == id &&
888 ioc->scsi_lookup[i].scmd->device->channel == channel)) {
889 found = 1;
890 goto out;
891 }
892 }
893 out:
894 spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
895 return found;
896 }
897
898 /**
899 * _scsih_scsi_lookup_find_by_lun - search for matching channel:id:lun
900 * @ioc: per adapter object
901 * @id: target id
902 * @lun: lun number
903 * @channel: channel
904 * Context: This function will acquire ioc->scsi_lookup_lock.
905 *
906 * This will search for a matching channel:id:lun in the scsi_lookup array,
907 * returning 1 if found.
908 */
909 static u8
910 _scsih_scsi_lookup_find_by_lun(struct MPT2SAS_ADAPTER *ioc, int id,
911 unsigned int lun, int channel)
912 {
913 u8 found;
914 unsigned long flags;
915 int i;
916
917 spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
918 found = 0;
919 for (i = 0 ; i < ioc->scsiio_depth; i++) {
920 if (ioc->scsi_lookup[i].scmd &&
921 (ioc->scsi_lookup[i].scmd->device->id == id &&
922 ioc->scsi_lookup[i].scmd->device->channel == channel &&
923 ioc->scsi_lookup[i].scmd->device->lun == lun)) {
924 found = 1;
925 goto out;
926 }
927 }
928 out:
929 spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
930 return found;
931 }
932
933 /**
934 * _scsih_get_chain_buffer_tracker - obtain chain tracker
935 * @ioc: per adapter object
936 * @smid: smid associated to an IO request
937 *
938 * Returns chain tracker(from ioc->free_chain_list)
939 */
940 static struct chain_tracker *
941 _scsih_get_chain_buffer_tracker(struct MPT2SAS_ADAPTER *ioc, u16 smid)
942 {
943 struct chain_tracker *chain_req;
944 unsigned long flags;
945
946 spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
947 if (list_empty(&ioc->free_chain_list)) {
948 spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
949 printk(MPT2SAS_WARN_FMT "chain buffers not available\n",
950 ioc->name);
951 return NULL;
952 }
953 chain_req = list_entry(ioc->free_chain_list.next,
954 struct chain_tracker, tracker_list);
955 list_del_init(&chain_req->tracker_list);
956 list_add_tail(&chain_req->tracker_list,
957 &ioc->scsi_lookup[smid - 1].chain_list);
958 spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
959 return chain_req;
960 }
961
962 /**
963 * _scsih_build_scatter_gather - main sg creation routine
964 * @ioc: per adapter object
965 * @scmd: scsi command
966 * @smid: system request message index
967 * Context: none.
968 *
969 * The main routine that builds scatter gather table from a given
970 * scsi request sent via the .queuecommand main handler.
971 *
972 * Returns 0 success, anything else error
973 */
974 static int
975 _scsih_build_scatter_gather(struct MPT2SAS_ADAPTER *ioc,
976 struct scsi_cmnd *scmd, u16 smid)
977 {
978 Mpi2SCSIIORequest_t *mpi_request;
979 dma_addr_t chain_dma;
980 struct scatterlist *sg_scmd;
981 void *sg_local, *chain;
982 u32 chain_offset;
983 u32 chain_length;
984 u32 chain_flags;
985 int sges_left;
986 u32 sges_in_segment;
987 u32 sgl_flags;
988 u32 sgl_flags_last_element;
989 u32 sgl_flags_end_buffer;
990 struct chain_tracker *chain_req;
991
992 mpi_request = mpt2sas_base_get_msg_frame(ioc, smid);
993
994 /* init scatter gather flags */
995 sgl_flags = MPI2_SGE_FLAGS_SIMPLE_ELEMENT;
996 if (scmd->sc_data_direction == DMA_TO_DEVICE)
997 sgl_flags |= MPI2_SGE_FLAGS_HOST_TO_IOC;
998 sgl_flags_last_element = (sgl_flags | MPI2_SGE_FLAGS_LAST_ELEMENT)
999 << MPI2_SGE_FLAGS_SHIFT;
1000 sgl_flags_end_buffer = (sgl_flags | MPI2_SGE_FLAGS_LAST_ELEMENT |
1001 MPI2_SGE_FLAGS_END_OF_BUFFER | MPI2_SGE_FLAGS_END_OF_LIST)
1002 << MPI2_SGE_FLAGS_SHIFT;
1003 sgl_flags = sgl_flags << MPI2_SGE_FLAGS_SHIFT;
1004
1005 sg_scmd = scsi_sglist(scmd);
1006 sges_left = scsi_dma_map(scmd);
1007 if (sges_left < 0) {
1008 sdev_printk(KERN_ERR, scmd->device, "pci_map_sg"
1009 " failed: request for %d bytes!\n", scsi_bufflen(scmd));
1010 return -ENOMEM;
1011 }
1012
1013 sg_local = &mpi_request->SGL;
1014 sges_in_segment = ioc->max_sges_in_main_message;
1015 if (sges_left <= sges_in_segment)
1016 goto fill_in_last_segment;
1017
1018 mpi_request->ChainOffset = (offsetof(Mpi2SCSIIORequest_t, SGL) +
1019 (sges_in_segment * ioc->sge_size))/4;
1020
1021 /* fill in main message segment when there is a chain following */
1022 while (sges_in_segment) {
1023 if (sges_in_segment == 1)
1024 ioc->base_add_sg_single(sg_local,
1025 sgl_flags_last_element | sg_dma_len(sg_scmd),
1026 sg_dma_address(sg_scmd));
1027 else
1028 ioc->base_add_sg_single(sg_local, sgl_flags |
1029 sg_dma_len(sg_scmd), sg_dma_address(sg_scmd));
1030 sg_scmd = sg_next(sg_scmd);
1031 sg_local += ioc->sge_size;
1032 sges_left--;
1033 sges_in_segment--;
1034 }
1035
1036 /* initializing the chain flags and pointers */
1037 chain_flags = MPI2_SGE_FLAGS_CHAIN_ELEMENT << MPI2_SGE_FLAGS_SHIFT;
1038 chain_req = _scsih_get_chain_buffer_tracker(ioc, smid);
1039 if (!chain_req)
1040 return -1;
1041 chain = chain_req->chain_buffer;
1042 chain_dma = chain_req->chain_buffer_dma;
1043 do {
1044 sges_in_segment = (sges_left <=
1045 ioc->max_sges_in_chain_message) ? sges_left :
1046 ioc->max_sges_in_chain_message;
1047 chain_offset = (sges_left == sges_in_segment) ?
1048 0 : (sges_in_segment * ioc->sge_size)/4;
1049 chain_length = sges_in_segment * ioc->sge_size;
1050 if (chain_offset) {
1051 chain_offset = chain_offset <<
1052 MPI2_SGE_CHAIN_OFFSET_SHIFT;
1053 chain_length += ioc->sge_size;
1054 }
1055 ioc->base_add_sg_single(sg_local, chain_flags | chain_offset |
1056 chain_length, chain_dma);
1057 sg_local = chain;
1058 if (!chain_offset)
1059 goto fill_in_last_segment;
1060
1061 /* fill in chain segments */
1062 while (sges_in_segment) {
1063 if (sges_in_segment == 1)
1064 ioc->base_add_sg_single(sg_local,
1065 sgl_flags_last_element |
1066 sg_dma_len(sg_scmd),
1067 sg_dma_address(sg_scmd));
1068 else
1069 ioc->base_add_sg_single(sg_local, sgl_flags |
1070 sg_dma_len(sg_scmd),
1071 sg_dma_address(sg_scmd));
1072 sg_scmd = sg_next(sg_scmd);
1073 sg_local += ioc->sge_size;
1074 sges_left--;
1075 sges_in_segment--;
1076 }
1077
1078 chain_req = _scsih_get_chain_buffer_tracker(ioc, smid);
1079 if (!chain_req)
1080 return -1;
1081 chain = chain_req->chain_buffer;
1082 chain_dma = chain_req->chain_buffer_dma;
1083 } while (1);
1084
1085
1086 fill_in_last_segment:
1087
1088 /* fill the last segment */
1089 while (sges_left) {
1090 if (sges_left == 1)
1091 ioc->base_add_sg_single(sg_local, sgl_flags_end_buffer |
1092 sg_dma_len(sg_scmd), sg_dma_address(sg_scmd));
1093 else
1094 ioc->base_add_sg_single(sg_local, sgl_flags |
1095 sg_dma_len(sg_scmd), sg_dma_address(sg_scmd));
1096 sg_scmd = sg_next(sg_scmd);
1097 sg_local += ioc->sge_size;
1098 sges_left--;
1099 }
1100
1101 return 0;
1102 }
1103
1104 /**
1105 * _scsih_adjust_queue_depth - setting device queue depth
1106 * @sdev: scsi device struct
1107 * @qdepth: requested queue depth
1108 *
1109 *
1110 * Returns nothing
1111 */
1112 static void
1113 _scsih_adjust_queue_depth(struct scsi_device *sdev, int qdepth)
1114 {
1115 struct Scsi_Host *shost = sdev->host;
1116 int max_depth;
1117 struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
1118 struct MPT2SAS_DEVICE *sas_device_priv_data;
1119 struct MPT2SAS_TARGET *sas_target_priv_data;
1120 struct _sas_device *sas_device;
1121 unsigned long flags;
1122
1123 max_depth = shost->can_queue;
1124
1125 /* limit max device queue for SATA to 32 */
1126 sas_device_priv_data = sdev->hostdata;
1127 if (!sas_device_priv_data)
1128 goto not_sata;
1129 sas_target_priv_data = sas_device_priv_data->sas_target;
1130 if (!sas_target_priv_data)
1131 goto not_sata;
1132 if ((sas_target_priv_data->flags & MPT_TARGET_FLAGS_VOLUME))
1133 goto not_sata;
1134 spin_lock_irqsave(&ioc->sas_device_lock, flags);
1135 sas_device = mpt2sas_scsih_sas_device_find_by_sas_address(ioc,
1136 sas_device_priv_data->sas_target->sas_address);
1137 spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
1138 if (sas_device && sas_device->device_info &
1139 MPI2_SAS_DEVICE_INFO_SATA_DEVICE)
1140 max_depth = MPT2SAS_SATA_QUEUE_DEPTH;
1141
1142 not_sata:
1143
1144 if (!sdev->tagged_supported)
1145 max_depth = 1;
1146 if (qdepth > max_depth)
1147 qdepth = max_depth;
1148 scsi_adjust_queue_depth(sdev, scsi_get_tag_type(sdev), qdepth);
1149 }
1150
1151 /**
1152 * _scsih_change_queue_depth - setting device queue depth
1153 * @sdev: scsi device struct
1154 * @qdepth: requested queue depth
1155 * @reason: SCSI_QDEPTH_DEFAULT/SCSI_QDEPTH_QFULL/SCSI_QDEPTH_RAMP_UP
1156 * (see include/scsi/scsi_host.h for definition)
1157 *
1158 * Returns queue depth.
1159 */
1160 static int
1161 _scsih_change_queue_depth(struct scsi_device *sdev, int qdepth, int reason)
1162 {
1163 if (reason == SCSI_QDEPTH_DEFAULT || reason == SCSI_QDEPTH_RAMP_UP)
1164 _scsih_adjust_queue_depth(sdev, qdepth);
1165 else if (reason == SCSI_QDEPTH_QFULL)
1166 scsi_track_queue_full(sdev, qdepth);
1167 else
1168 return -EOPNOTSUPP;
1169
1170 if (sdev->inquiry_len > 7)
1171 sdev_printk(KERN_INFO, sdev, "qdepth(%d), tagged(%d), "
1172 "simple(%d), ordered(%d), scsi_level(%d), cmd_que(%d)\n",
1173 sdev->queue_depth, sdev->tagged_supported, sdev->simple_tags,
1174 sdev->ordered_tags, sdev->scsi_level,
1175 (sdev->inquiry[7] & 2) >> 1);
1176
1177 return sdev->queue_depth;
1178 }
1179
1180 /**
1181 * _scsih_change_queue_type - changing device queue tag type
1182 * @sdev: scsi device struct
1183 * @tag_type: requested tag type
1184 *
1185 * Returns queue tag type.
1186 */
1187 static int
1188 _scsih_change_queue_type(struct scsi_device *sdev, int tag_type)
1189 {
1190 if (sdev->tagged_supported) {
1191 scsi_set_tag_type(sdev, tag_type);
1192 if (tag_type)
1193 scsi_activate_tcq(sdev, sdev->queue_depth);
1194 else
1195 scsi_deactivate_tcq(sdev, sdev->queue_depth);
1196 } else
1197 tag_type = 0;
1198
1199 return tag_type;
1200 }
1201
1202 /**
1203 * _scsih_target_alloc - target add routine
1204 * @starget: scsi target struct
1205 *
1206 * Returns 0 if ok. Any other return is assumed to be an error and
1207 * the device is ignored.
1208 */
1209 static int
1210 _scsih_target_alloc(struct scsi_target *starget)
1211 {
1212 struct Scsi_Host *shost = dev_to_shost(&starget->dev);
1213 struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
1214 struct MPT2SAS_TARGET *sas_target_priv_data;
1215 struct _sas_device *sas_device;
1216 struct _raid_device *raid_device;
1217 unsigned long flags;
1218 struct sas_rphy *rphy;
1219
1220 sas_target_priv_data = kzalloc(sizeof(struct scsi_target), GFP_KERNEL);
1221 if (!sas_target_priv_data)
1222 return -ENOMEM;
1223
1224 starget->hostdata = sas_target_priv_data;
1225 sas_target_priv_data->starget = starget;
1226 sas_target_priv_data->handle = MPT2SAS_INVALID_DEVICE_HANDLE;
1227
1228 /* RAID volumes */
1229 if (starget->channel == RAID_CHANNEL) {
1230 spin_lock_irqsave(&ioc->raid_device_lock, flags);
1231 raid_device = _scsih_raid_device_find_by_id(ioc, starget->id,
1232 starget->channel);
1233 if (raid_device) {
1234 sas_target_priv_data->handle = raid_device->handle;
1235 sas_target_priv_data->sas_address = raid_device->wwid;
1236 sas_target_priv_data->flags |= MPT_TARGET_FLAGS_VOLUME;
1237 raid_device->starget = starget;
1238 }
1239 spin_unlock_irqrestore(&ioc->raid_device_lock, flags);
1240 return 0;
1241 }
1242
1243 /* sas/sata devices */
1244 spin_lock_irqsave(&ioc->sas_device_lock, flags);
1245 rphy = dev_to_rphy(starget->dev.parent);
1246 sas_device = mpt2sas_scsih_sas_device_find_by_sas_address(ioc,
1247 rphy->identify.sas_address);
1248
1249 if (sas_device) {
1250 sas_target_priv_data->handle = sas_device->handle;
1251 sas_target_priv_data->sas_address = sas_device->sas_address;
1252 sas_device->starget = starget;
1253 sas_device->id = starget->id;
1254 sas_device->channel = starget->channel;
1255 if (test_bit(sas_device->handle, ioc->pd_handles))
1256 sas_target_priv_data->flags |=
1257 MPT_TARGET_FLAGS_RAID_COMPONENT;
1258 }
1259 spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
1260
1261 return 0;
1262 }
1263
1264 /**
1265 * _scsih_target_destroy - target destroy routine
1266 * @starget: scsi target struct
1267 *
1268 * Returns nothing.
1269 */
1270 static void
1271 _scsih_target_destroy(struct scsi_target *starget)
1272 {
1273 struct Scsi_Host *shost = dev_to_shost(&starget->dev);
1274 struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
1275 struct MPT2SAS_TARGET *sas_target_priv_data;
1276 struct _sas_device *sas_device;
1277 struct _raid_device *raid_device;
1278 unsigned long flags;
1279 struct sas_rphy *rphy;
1280
1281 sas_target_priv_data = starget->hostdata;
1282 if (!sas_target_priv_data)
1283 return;
1284
1285 if (starget->channel == RAID_CHANNEL) {
1286 spin_lock_irqsave(&ioc->raid_device_lock, flags);
1287 raid_device = _scsih_raid_device_find_by_id(ioc, starget->id,
1288 starget->channel);
1289 if (raid_device) {
1290 raid_device->starget = NULL;
1291 raid_device->sdev = NULL;
1292 }
1293 spin_unlock_irqrestore(&ioc->raid_device_lock, flags);
1294 goto out;
1295 }
1296
1297 spin_lock_irqsave(&ioc->sas_device_lock, flags);
1298 rphy = dev_to_rphy(starget->dev.parent);
1299 sas_device = mpt2sas_scsih_sas_device_find_by_sas_address(ioc,
1300 rphy->identify.sas_address);
1301 if (sas_device && (sas_device->starget == starget) &&
1302 (sas_device->id == starget->id) &&
1303 (sas_device->channel == starget->channel))
1304 sas_device->starget = NULL;
1305
1306 spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
1307
1308 out:
1309 kfree(sas_target_priv_data);
1310 starget->hostdata = NULL;
1311 }
1312
1313 /**
1314 * _scsih_slave_alloc - device add routine
1315 * @sdev: scsi device struct
1316 *
1317 * Returns 0 if ok. Any other return is assumed to be an error and
1318 * the device is ignored.
1319 */
1320 static int
1321 _scsih_slave_alloc(struct scsi_device *sdev)
1322 {
1323 struct Scsi_Host *shost;
1324 struct MPT2SAS_ADAPTER *ioc;
1325 struct MPT2SAS_TARGET *sas_target_priv_data;
1326 struct MPT2SAS_DEVICE *sas_device_priv_data;
1327 struct scsi_target *starget;
1328 struct _raid_device *raid_device;
1329 unsigned long flags;
1330
1331 sas_device_priv_data = kzalloc(sizeof(struct scsi_device), GFP_KERNEL);
1332 if (!sas_device_priv_data)
1333 return -ENOMEM;
1334
1335 sas_device_priv_data->lun = sdev->lun;
1336 sas_device_priv_data->flags = MPT_DEVICE_FLAGS_INIT;
1337
1338 starget = scsi_target(sdev);
1339 sas_target_priv_data = starget->hostdata;
1340 sas_target_priv_data->num_luns++;
1341 sas_device_priv_data->sas_target = sas_target_priv_data;
1342 sdev->hostdata = sas_device_priv_data;
1343 if ((sas_target_priv_data->flags & MPT_TARGET_FLAGS_RAID_COMPONENT))
1344 sdev->no_uld_attach = 1;
1345
1346 shost = dev_to_shost(&starget->dev);
1347 ioc = shost_priv(shost);
1348 if (starget->channel == RAID_CHANNEL) {
1349 spin_lock_irqsave(&ioc->raid_device_lock, flags);
1350 raid_device = _scsih_raid_device_find_by_id(ioc,
1351 starget->id, starget->channel);
1352 if (raid_device)
1353 raid_device->sdev = sdev; /* raid is single lun */
1354 spin_unlock_irqrestore(&ioc->raid_device_lock, flags);
1355 }
1356
1357 return 0;
1358 }
1359
1360 /**
1361 * _scsih_slave_destroy - device destroy routine
1362 * @sdev: scsi device struct
1363 *
1364 * Returns nothing.
1365 */
1366 static void
1367 _scsih_slave_destroy(struct scsi_device *sdev)
1368 {
1369 struct MPT2SAS_TARGET *sas_target_priv_data;
1370 struct scsi_target *starget;
1371
1372 if (!sdev->hostdata)
1373 return;
1374
1375 starget = scsi_target(sdev);
1376 sas_target_priv_data = starget->hostdata;
1377 sas_target_priv_data->num_luns--;
1378 kfree(sdev->hostdata);
1379 sdev->hostdata = NULL;
1380 }
1381
1382 /**
1383 * _scsih_display_sata_capabilities - sata capabilities
1384 * @ioc: per adapter object
1385 * @sas_device: the sas_device object
1386 * @sdev: scsi device struct
1387 */
1388 static void
1389 _scsih_display_sata_capabilities(struct MPT2SAS_ADAPTER *ioc,
1390 struct _sas_device *sas_device, struct scsi_device *sdev)
1391 {
1392 Mpi2ConfigReply_t mpi_reply;
1393 Mpi2SasDevicePage0_t sas_device_pg0;
1394 u32 ioc_status;
1395 u16 flags;
1396 u32 device_info;
1397
1398 if ((mpt2sas_config_get_sas_device_pg0(ioc, &mpi_reply, &sas_device_pg0,
1399 MPI2_SAS_DEVICE_PGAD_FORM_HANDLE, sas_device->handle))) {
1400 printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
1401 ioc->name, __FILE__, __LINE__, __func__);
1402 return;
1403 }
1404
1405 ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
1406 MPI2_IOCSTATUS_MASK;
1407 if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
1408 printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
1409 ioc->name, __FILE__, __LINE__, __func__);
1410 return;
1411 }
1412
1413 flags = le16_to_cpu(sas_device_pg0.Flags);
1414 device_info = le32_to_cpu(sas_device_pg0.DeviceInfo);
1415
1416 sdev_printk(KERN_INFO, sdev,
1417 "atapi(%s), ncq(%s), asyn_notify(%s), smart(%s), fua(%s), "
1418 "sw_preserve(%s)\n",
1419 (device_info & MPI2_SAS_DEVICE_INFO_ATAPI_DEVICE) ? "y" : "n",
1420 (flags & MPI2_SAS_DEVICE0_FLAGS_SATA_NCQ_SUPPORTED) ? "y" : "n",
1421 (flags & MPI2_SAS_DEVICE0_FLAGS_SATA_ASYNCHRONOUS_NOTIFY) ? "y" :
1422 "n",
1423 (flags & MPI2_SAS_DEVICE0_FLAGS_SATA_SMART_SUPPORTED) ? "y" : "n",
1424 (flags & MPI2_SAS_DEVICE0_FLAGS_SATA_FUA_SUPPORTED) ? "y" : "n",
1425 (flags & MPI2_SAS_DEVICE0_FLAGS_SATA_SW_PRESERVE) ? "y" : "n");
1426 }
1427
1428 /**
1429 * _scsih_is_raid - return boolean indicating device is raid volume
1430 * @dev the device struct object
1431 */
1432 static int
1433 _scsih_is_raid(struct device *dev)
1434 {
1435 struct scsi_device *sdev = to_scsi_device(dev);
1436
1437 return (sdev->channel == RAID_CHANNEL) ? 1 : 0;
1438 }
1439
1440 /**
1441 * _scsih_get_resync - get raid volume resync percent complete
1442 * @dev the device struct object
1443 */
1444 static void
1445 _scsih_get_resync(struct device *dev)
1446 {
1447 struct scsi_device *sdev = to_scsi_device(dev);
1448 struct MPT2SAS_ADAPTER *ioc = shost_priv(sdev->host);
1449 static struct _raid_device *raid_device;
1450 unsigned long flags;
1451 Mpi2RaidVolPage0_t vol_pg0;
1452 Mpi2ConfigReply_t mpi_reply;
1453 u32 volume_status_flags;
1454 u8 percent_complete = 0;
1455
1456 spin_lock_irqsave(&ioc->raid_device_lock, flags);
1457 raid_device = _scsih_raid_device_find_by_id(ioc, sdev->id,
1458 sdev->channel);
1459 spin_unlock_irqrestore(&ioc->raid_device_lock, flags);
1460
1461 if (!raid_device)
1462 goto out;
1463
1464 if (mpt2sas_config_get_raid_volume_pg0(ioc, &mpi_reply, &vol_pg0,
1465 MPI2_RAID_VOLUME_PGAD_FORM_HANDLE, raid_device->handle,
1466 sizeof(Mpi2RaidVolPage0_t))) {
1467 printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
1468 ioc->name, __FILE__, __LINE__, __func__);
1469 goto out;
1470 }
1471
1472 volume_status_flags = le32_to_cpu(vol_pg0.VolumeStatusFlags);
1473 if (volume_status_flags & MPI2_RAIDVOL0_STATUS_FLAG_RESYNC_IN_PROGRESS)
1474 percent_complete = raid_device->percent_complete;
1475 out:
1476 raid_set_resync(mpt2sas_raid_template, dev, percent_complete);
1477 }
1478
1479 /**
1480 * _scsih_get_state - get raid volume level
1481 * @dev the device struct object
1482 */
1483 static void
1484 _scsih_get_state(struct device *dev)
1485 {
1486 struct scsi_device *sdev = to_scsi_device(dev);
1487 struct MPT2SAS_ADAPTER *ioc = shost_priv(sdev->host);
1488 static struct _raid_device *raid_device;
1489 unsigned long flags;
1490 Mpi2RaidVolPage0_t vol_pg0;
1491 Mpi2ConfigReply_t mpi_reply;
1492 u32 volstate;
1493 enum raid_state state = RAID_STATE_UNKNOWN;
1494
1495 spin_lock_irqsave(&ioc->raid_device_lock, flags);
1496 raid_device = _scsih_raid_device_find_by_id(ioc, sdev->id,
1497 sdev->channel);
1498 spin_unlock_irqrestore(&ioc->raid_device_lock, flags);
1499
1500 if (!raid_device)
1501 goto out;
1502
1503 if (mpt2sas_config_get_raid_volume_pg0(ioc, &mpi_reply, &vol_pg0,
1504 MPI2_RAID_VOLUME_PGAD_FORM_HANDLE, raid_device->handle,
1505 sizeof(Mpi2RaidVolPage0_t))) {
1506 printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
1507 ioc->name, __FILE__, __LINE__, __func__);
1508 goto out;
1509 }
1510
1511 volstate = le32_to_cpu(vol_pg0.VolumeStatusFlags);
1512 if (volstate & MPI2_RAIDVOL0_STATUS_FLAG_RESYNC_IN_PROGRESS) {
1513 state = RAID_STATE_RESYNCING;
1514 goto out;
1515 }
1516
1517 switch (vol_pg0.VolumeState) {
1518 case MPI2_RAID_VOL_STATE_OPTIMAL:
1519 case MPI2_RAID_VOL_STATE_ONLINE:
1520 state = RAID_STATE_ACTIVE;
1521 break;
1522 case MPI2_RAID_VOL_STATE_DEGRADED:
1523 state = RAID_STATE_DEGRADED;
1524 break;
1525 case MPI2_RAID_VOL_STATE_FAILED:
1526 case MPI2_RAID_VOL_STATE_MISSING:
1527 state = RAID_STATE_OFFLINE;
1528 break;
1529 }
1530 out:
1531 raid_set_state(mpt2sas_raid_template, dev, state);
1532 }
1533
1534 /**
1535 * _scsih_set_level - set raid level
1536 * @sdev: scsi device struct
1537 * @raid_device: raid_device object
1538 */
1539 static void
1540 _scsih_set_level(struct scsi_device *sdev, struct _raid_device *raid_device)
1541 {
1542 enum raid_level level = RAID_LEVEL_UNKNOWN;
1543
1544 switch (raid_device->volume_type) {
1545 case MPI2_RAID_VOL_TYPE_RAID0:
1546 level = RAID_LEVEL_0;
1547 break;
1548 case MPI2_RAID_VOL_TYPE_RAID10:
1549 level = RAID_LEVEL_10;
1550 break;
1551 case MPI2_RAID_VOL_TYPE_RAID1E:
1552 level = RAID_LEVEL_1E;
1553 break;
1554 case MPI2_RAID_VOL_TYPE_RAID1:
1555 level = RAID_LEVEL_1;
1556 break;
1557 }
1558
1559 raid_set_level(mpt2sas_raid_template, &sdev->sdev_gendev, level);
1560 }
1561
1562 /**
1563 * _scsih_get_volume_capabilities - volume capabilities
1564 * @ioc: per adapter object
1565 * @sas_device: the raid_device object
1566 */
1567 static void
1568 _scsih_get_volume_capabilities(struct MPT2SAS_ADAPTER *ioc,
1569 struct _raid_device *raid_device)
1570 {
1571 Mpi2RaidVolPage0_t *vol_pg0;
1572 Mpi2RaidPhysDiskPage0_t pd_pg0;
1573 Mpi2SasDevicePage0_t sas_device_pg0;
1574 Mpi2ConfigReply_t mpi_reply;
1575 u16 sz;
1576 u8 num_pds;
1577
1578 if ((mpt2sas_config_get_number_pds(ioc, raid_device->handle,
1579 &num_pds)) || !num_pds) {
1580 printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
1581 ioc->name, __FILE__, __LINE__, __func__);
1582 return;
1583 }
1584
1585 raid_device->num_pds = num_pds;
1586 sz = offsetof(Mpi2RaidVolPage0_t, PhysDisk) + (num_pds *
1587 sizeof(Mpi2RaidVol0PhysDisk_t));
1588 vol_pg0 = kzalloc(sz, GFP_KERNEL);
1589 if (!vol_pg0) {
1590 printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
1591 ioc->name, __FILE__, __LINE__, __func__);
1592 return;
1593 }
1594
1595 if ((mpt2sas_config_get_raid_volume_pg0(ioc, &mpi_reply, vol_pg0,
1596 MPI2_RAID_VOLUME_PGAD_FORM_HANDLE, raid_device->handle, sz))) {
1597 printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
1598 ioc->name, __FILE__, __LINE__, __func__);
1599 kfree(vol_pg0);
1600 return;
1601 }
1602
1603 raid_device->volume_type = vol_pg0->VolumeType;
1604
1605 /* figure out what the underlying devices are by
1606 * obtaining the device_info bits for the 1st device
1607 */
1608 if (!(mpt2sas_config_get_phys_disk_pg0(ioc, &mpi_reply,
1609 &pd_pg0, MPI2_PHYSDISK_PGAD_FORM_PHYSDISKNUM,
1610 vol_pg0->PhysDisk[0].PhysDiskNum))) {
1611 if (!(mpt2sas_config_get_sas_device_pg0(ioc, &mpi_reply,
1612 &sas_device_pg0, MPI2_SAS_DEVICE_PGAD_FORM_HANDLE,
1613 le16_to_cpu(pd_pg0.DevHandle)))) {
1614 raid_device->device_info =
1615 le32_to_cpu(sas_device_pg0.DeviceInfo);
1616 }
1617 }
1618
1619 kfree(vol_pg0);
1620 }
1621
1622 /**
1623 * _scsih_enable_tlr - setting TLR flags
1624 * @ioc: per adapter object
1625 * @sdev: scsi device struct
1626 *
1627 * Enabling Transaction Layer Retries for tape devices when
1628 * vpd page 0x90 is present
1629 *
1630 */
1631 static void
1632 _scsih_enable_tlr(struct MPT2SAS_ADAPTER *ioc, struct scsi_device *sdev)
1633 {
1634 /* only for TAPE */
1635 if (sdev->type != TYPE_TAPE)
1636 return;
1637
1638 if (!(ioc->facts.IOCCapabilities & MPI2_IOCFACTS_CAPABILITY_TLR))
1639 return;
1640
1641 sas_enable_tlr(sdev);
1642 sdev_printk(KERN_INFO, sdev, "TLR %s\n",
1643 sas_is_tlr_enabled(sdev) ? "Enabled" : "Disabled");
1644 return;
1645
1646 }
1647
1648 /**
1649 * _scsih_slave_configure - device configure routine.
1650 * @sdev: scsi device struct
1651 *
1652 * Returns 0 if ok. Any other return is assumed to be an error and
1653 * the device is ignored.
1654 */
1655 static int
1656 _scsih_slave_configure(struct scsi_device *sdev)
1657 {
1658 struct Scsi_Host *shost = sdev->host;
1659 struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
1660 struct MPT2SAS_DEVICE *sas_device_priv_data;
1661 struct MPT2SAS_TARGET *sas_target_priv_data;
1662 struct _sas_device *sas_device;
1663 struct _raid_device *raid_device;
1664 unsigned long flags;
1665 int qdepth;
1666 u8 ssp_target = 0;
1667 char *ds = "";
1668 char *r_level = "";
1669
1670 qdepth = 1;
1671 sas_device_priv_data = sdev->hostdata;
1672 sas_device_priv_data->configured_lun = 1;
1673 sas_device_priv_data->flags &= ~MPT_DEVICE_FLAGS_INIT;
1674 sas_target_priv_data = sas_device_priv_data->sas_target;
1675
1676 /* raid volume handling */
1677 if (sas_target_priv_data->flags & MPT_TARGET_FLAGS_VOLUME) {
1678
1679 spin_lock_irqsave(&ioc->raid_device_lock, flags);
1680 raid_device = _scsih_raid_device_find_by_handle(ioc,
1681 sas_target_priv_data->handle);
1682 spin_unlock_irqrestore(&ioc->raid_device_lock, flags);
1683 if (!raid_device) {
1684 printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
1685 ioc->name, __FILE__, __LINE__, __func__);
1686 return 0;
1687 }
1688
1689 _scsih_get_volume_capabilities(ioc, raid_device);
1690
1691 /* RAID Queue Depth Support
1692 * IS volume = underlying qdepth of drive type, either
1693 * MPT2SAS_SAS_QUEUE_DEPTH or MPT2SAS_SATA_QUEUE_DEPTH
1694 * IM/IME/R10 = 128 (MPT2SAS_RAID_QUEUE_DEPTH)
1695 */
1696 if (raid_device->device_info &
1697 MPI2_SAS_DEVICE_INFO_SSP_TARGET) {
1698 qdepth = MPT2SAS_SAS_QUEUE_DEPTH;
1699 ds = "SSP";
1700 } else {
1701 qdepth = MPT2SAS_SATA_QUEUE_DEPTH;
1702 if (raid_device->device_info &
1703 MPI2_SAS_DEVICE_INFO_SATA_DEVICE)
1704 ds = "SATA";
1705 else
1706 ds = "STP";
1707 }
1708
1709 switch (raid_device->volume_type) {
1710 case MPI2_RAID_VOL_TYPE_RAID0:
1711 r_level = "RAID0";
1712 break;
1713 case MPI2_RAID_VOL_TYPE_RAID1E:
1714 qdepth = MPT2SAS_RAID_QUEUE_DEPTH;
1715 if (ioc->manu_pg10.OEMIdentifier &&
1716 (ioc->manu_pg10.GenericFlags0 &
1717 MFG10_GF0_R10_DISPLAY) &&
1718 !(raid_device->num_pds % 2))
1719 r_level = "RAID10";
1720 else
1721 r_level = "RAID1E";
1722 break;
1723 case MPI2_RAID_VOL_TYPE_RAID1:
1724 qdepth = MPT2SAS_RAID_QUEUE_DEPTH;
1725 r_level = "RAID1";
1726 break;
1727 case MPI2_RAID_VOL_TYPE_RAID10:
1728 qdepth = MPT2SAS_RAID_QUEUE_DEPTH;
1729 r_level = "RAID10";
1730 break;
1731 case MPI2_RAID_VOL_TYPE_UNKNOWN:
1732 default:
1733 qdepth = MPT2SAS_RAID_QUEUE_DEPTH;
1734 r_level = "RAIDX";
1735 break;
1736 }
1737
1738 sdev_printk(KERN_INFO, sdev, "%s: "
1739 "handle(0x%04x), wwid(0x%016llx), pd_count(%d), type(%s)\n",
1740 r_level, raid_device->handle,
1741 (unsigned long long)raid_device->wwid,
1742 raid_device->num_pds, ds);
1743 _scsih_change_queue_depth(sdev, qdepth, SCSI_QDEPTH_DEFAULT);
1744 /* raid transport support */
1745 _scsih_set_level(sdev, raid_device);
1746 return 0;
1747 }
1748
1749 /* non-raid handling */
1750 spin_lock_irqsave(&ioc->sas_device_lock, flags);
1751 sas_device = mpt2sas_scsih_sas_device_find_by_sas_address(ioc,
1752 sas_device_priv_data->sas_target->sas_address);
1753 spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
1754 if (sas_device) {
1755 if (sas_target_priv_data->flags &
1756 MPT_TARGET_FLAGS_RAID_COMPONENT) {
1757 mpt2sas_config_get_volume_handle(ioc,
1758 sas_device->handle, &sas_device->volume_handle);
1759 mpt2sas_config_get_volume_wwid(ioc,
1760 sas_device->volume_handle,
1761 &sas_device->volume_wwid);
1762 }
1763 if (sas_device->device_info & MPI2_SAS_DEVICE_INFO_SSP_TARGET) {
1764 qdepth = MPT2SAS_SAS_QUEUE_DEPTH;
1765 ssp_target = 1;
1766 ds = "SSP";
1767 } else {
1768 qdepth = MPT2SAS_SATA_QUEUE_DEPTH;
1769 if (sas_device->device_info &
1770 MPI2_SAS_DEVICE_INFO_STP_TARGET)
1771 ds = "STP";
1772 else if (sas_device->device_info &
1773 MPI2_SAS_DEVICE_INFO_SATA_DEVICE)
1774 ds = "SATA";
1775 }
1776
1777 sdev_printk(KERN_INFO, sdev, "%s: handle(0x%04x), "
1778 "sas_addr(0x%016llx), phy(%d), device_name(0x%016llx)\n",
1779 ds, sas_device->handle,
1780 (unsigned long long)sas_device->sas_address,
1781 sas_device->phy,
1782 (unsigned long long)sas_device->device_name);
1783 sdev_printk(KERN_INFO, sdev, "%s: "
1784 "enclosure_logical_id(0x%016llx), slot(%d)\n", ds,
1785 (unsigned long long) sas_device->enclosure_logical_id,
1786 sas_device->slot);
1787
1788 if (!ssp_target)
1789 _scsih_display_sata_capabilities(ioc, sas_device, sdev);
1790 }
1791
1792 _scsih_change_queue_depth(sdev, qdepth, SCSI_QDEPTH_DEFAULT);
1793
1794 if (ssp_target) {
1795 sas_read_port_mode_page(sdev);
1796 _scsih_enable_tlr(ioc, sdev);
1797 }
1798 return 0;
1799 }
1800
1801 /**
1802 * _scsih_bios_param - fetch head, sector, cylinder info for a disk
1803 * @sdev: scsi device struct
1804 * @bdev: pointer to block device context
1805 * @capacity: device size (in 512 byte sectors)
1806 * @params: three element array to place output:
1807 * params[0] number of heads (max 255)
1808 * params[1] number of sectors (max 63)
1809 * params[2] number of cylinders
1810 *
1811 * Return nothing.
1812 */
1813 static int
1814 _scsih_bios_param(struct scsi_device *sdev, struct block_device *bdev,
1815 sector_t capacity, int params[])
1816 {
1817 int heads;
1818 int sectors;
1819 sector_t cylinders;
1820 ulong dummy;
1821
1822 heads = 64;
1823 sectors = 32;
1824
1825 dummy = heads * sectors;
1826 cylinders = capacity;
1827 sector_div(cylinders, dummy);
1828
1829 /*
1830 * Handle extended translation size for logical drives
1831 * > 1Gb
1832 */
1833 if ((ulong)capacity >= 0x200000) {
1834 heads = 255;
1835 sectors = 63;
1836 dummy = heads * sectors;
1837 cylinders = capacity;
1838 sector_div(cylinders, dummy);
1839 }
1840
1841 /* return result */
1842 params[0] = heads;
1843 params[1] = sectors;
1844 params[2] = cylinders;
1845
1846 return 0;
1847 }
1848
1849 /**
1850 * _scsih_response_code - translation of device response code
1851 * @ioc: per adapter object
1852 * @response_code: response code returned by the device
1853 *
1854 * Return nothing.
1855 */
1856 static void
1857 _scsih_response_code(struct MPT2SAS_ADAPTER *ioc, u8 response_code)
1858 {
1859 char *desc;
1860
1861 switch (response_code) {
1862 case MPI2_SCSITASKMGMT_RSP_TM_COMPLETE:
1863 desc = "task management request completed";
1864 break;
1865 case MPI2_SCSITASKMGMT_RSP_INVALID_FRAME:
1866 desc = "invalid frame";
1867 break;
1868 case MPI2_SCSITASKMGMT_RSP_TM_NOT_SUPPORTED:
1869 desc = "task management request not supported";
1870 break;
1871 case MPI2_SCSITASKMGMT_RSP_TM_FAILED:
1872 desc = "task management request failed";
1873 break;
1874 case MPI2_SCSITASKMGMT_RSP_TM_SUCCEEDED:
1875 desc = "task management request succeeded";
1876 break;
1877 case MPI2_SCSITASKMGMT_RSP_TM_INVALID_LUN:
1878 desc = "invalid lun";
1879 break;
1880 case 0xA:
1881 desc = "overlapped tag attempted";
1882 break;
1883 case MPI2_SCSITASKMGMT_RSP_IO_QUEUED_ON_IOC:
1884 desc = "task queued, however not sent to target";
1885 break;
1886 default:
1887 desc = "unknown";
1888 break;
1889 }
1890 printk(MPT2SAS_WARN_FMT "response_code(0x%01x): %s\n",
1891 ioc->name, response_code, desc);
1892 }
1893
1894 /**
1895 * _scsih_tm_done - tm completion routine
1896 * @ioc: per adapter object
1897 * @smid: system request message index
1898 * @msix_index: MSIX table index supplied by the OS
1899 * @reply: reply message frame(lower 32bit addr)
1900 * Context: none.
1901 *
1902 * The callback handler when using scsih_issue_tm.
1903 *
1904 * Return 1 meaning mf should be freed from _base_interrupt
1905 * 0 means the mf is freed from this function.
1906 */
1907 static u8
1908 _scsih_tm_done(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 msix_index, u32 reply)
1909 {
1910 MPI2DefaultReply_t *mpi_reply;
1911
1912 if (ioc->tm_cmds.status == MPT2_CMD_NOT_USED)
1913 return 1;
1914 if (ioc->tm_cmds.smid != smid)
1915 return 1;
1916 ioc->tm_cmds.status |= MPT2_CMD_COMPLETE;
1917 mpi_reply = mpt2sas_base_get_reply_virt_addr(ioc, reply);
1918 if (mpi_reply) {
1919 memcpy(ioc->tm_cmds.reply, mpi_reply, mpi_reply->MsgLength*4);
1920 ioc->tm_cmds.status |= MPT2_CMD_REPLY_VALID;
1921 }
1922 ioc->tm_cmds.status &= ~MPT2_CMD_PENDING;
1923 complete(&ioc->tm_cmds.done);
1924 return 1;
1925 }
1926
1927 /**
1928 * mpt2sas_scsih_set_tm_flag - set per target tm_busy
1929 * @ioc: per adapter object
1930 * @handle: device handle
1931 *
1932 * During taskmangement request, we need to freeze the device queue.
1933 */
1934 void
1935 mpt2sas_scsih_set_tm_flag(struct MPT2SAS_ADAPTER *ioc, u16 handle)
1936 {
1937 struct MPT2SAS_DEVICE *sas_device_priv_data;
1938 struct scsi_device *sdev;
1939 u8 skip = 0;
1940
1941 shost_for_each_device(sdev, ioc->shost) {
1942 if (skip)
1943 continue;
1944 sas_device_priv_data = sdev->hostdata;
1945 if (!sas_device_priv_data)
1946 continue;
1947 if (sas_device_priv_data->sas_target->handle == handle) {
1948 sas_device_priv_data->sas_target->tm_busy = 1;
1949 skip = 1;
1950 ioc->ignore_loginfos = 1;
1951 }
1952 }
1953 }
1954
1955 /**
1956 * mpt2sas_scsih_clear_tm_flag - clear per target tm_busy
1957 * @ioc: per adapter object
1958 * @handle: device handle
1959 *
1960 * During taskmangement request, we need to freeze the device queue.
1961 */
1962 void
1963 mpt2sas_scsih_clear_tm_flag(struct MPT2SAS_ADAPTER *ioc, u16 handle)
1964 {
1965 struct MPT2SAS_DEVICE *sas_device_priv_data;
1966 struct scsi_device *sdev;
1967 u8 skip = 0;
1968
1969 shost_for_each_device(sdev, ioc->shost) {
1970 if (skip)
1971 continue;
1972 sas_device_priv_data = sdev->hostdata;
1973 if (!sas_device_priv_data)
1974 continue;
1975 if (sas_device_priv_data->sas_target->handle == handle) {
1976 sas_device_priv_data->sas_target->tm_busy = 0;
1977 skip = 1;
1978 ioc->ignore_loginfos = 0;
1979 }
1980 }
1981 }
1982
1983
1984 /**
1985 * mpt2sas_scsih_issue_tm - main routine for sending tm requests
1986 * @ioc: per adapter struct
1987 * @device_handle: device handle
1988 * @channel: the channel assigned by the OS
1989 * @id: the id assigned by the OS
1990 * @lun: lun number
1991 * @type: MPI2_SCSITASKMGMT_TASKTYPE__XXX (defined in mpi2_init.h)
1992 * @smid_task: smid assigned to the task
1993 * @timeout: timeout in seconds
1994 * Context: user
1995 *
1996 * A generic API for sending task management requests to firmware.
1997 *
1998 * The callback index is set inside `ioc->tm_cb_idx`.
1999 *
2000 * Return SUCCESS or FAILED.
2001 */
2002 int
2003 mpt2sas_scsih_issue_tm(struct MPT2SAS_ADAPTER *ioc, u16 handle, uint channel,
2004 uint id, uint lun, u8 type, u16 smid_task, ulong timeout,
2005 struct scsi_cmnd *scmd)
2006 {
2007 Mpi2SCSITaskManagementRequest_t *mpi_request;
2008 Mpi2SCSITaskManagementReply_t *mpi_reply;
2009 u16 smid = 0;
2010 u32 ioc_state;
2011 unsigned long timeleft;
2012 struct scsi_cmnd *scmd_lookup;
2013 int rc;
2014
2015 mutex_lock(&ioc->tm_cmds.mutex);
2016 if (ioc->tm_cmds.status != MPT2_CMD_NOT_USED) {
2017 printk(MPT2SAS_INFO_FMT "%s: tm_cmd busy!!!\n",
2018 __func__, ioc->name);
2019 rc = FAILED;
2020 goto err_out;
2021 }
2022
2023 if (ioc->shost_recovery || ioc->remove_host ||
2024 ioc->pci_error_recovery) {
2025 printk(MPT2SAS_INFO_FMT "%s: host reset in progress!\n",
2026 __func__, ioc->name);
2027 rc = FAILED;
2028 goto err_out;
2029 }
2030
2031 ioc_state = mpt2sas_base_get_iocstate(ioc, 0);
2032 if (ioc_state & MPI2_DOORBELL_USED) {
2033 dhsprintk(ioc, printk(MPT2SAS_INFO_FMT "unexpected doorbell "
2034 "active!\n", ioc->name));
2035 mpt2sas_base_hard_reset_handler(ioc, CAN_SLEEP,
2036 FORCE_BIG_HAMMER);
2037 rc = SUCCESS;
2038 goto err_out;
2039 }
2040
2041 if ((ioc_state & MPI2_IOC_STATE_MASK) == MPI2_IOC_STATE_FAULT) {
2042 mpt2sas_base_fault_info(ioc, ioc_state &
2043 MPI2_DOORBELL_DATA_MASK);
2044 mpt2sas_base_hard_reset_handler(ioc, CAN_SLEEP,
2045 FORCE_BIG_HAMMER);
2046 rc = SUCCESS;
2047 goto err_out;
2048 }
2049
2050 smid = mpt2sas_base_get_smid_hpr(ioc, ioc->tm_cb_idx);
2051 if (!smid) {
2052 printk(MPT2SAS_ERR_FMT "%s: failed obtaining a smid\n",
2053 ioc->name, __func__);
2054 rc = FAILED;
2055 goto err_out;
2056 }
2057
2058 dtmprintk(ioc, printk(MPT2SAS_INFO_FMT "sending tm: handle(0x%04x),"
2059 " task_type(0x%02x), smid(%d)\n", ioc->name, handle, type,
2060 smid_task));
2061 ioc->tm_cmds.status = MPT2_CMD_PENDING;
2062 mpi_request = mpt2sas_base_get_msg_frame(ioc, smid);
2063 ioc->tm_cmds.smid = smid;
2064 memset(mpi_request, 0, sizeof(Mpi2SCSITaskManagementRequest_t));
2065 mpi_request->Function = MPI2_FUNCTION_SCSI_TASK_MGMT;
2066 mpi_request->DevHandle = cpu_to_le16(handle);
2067 mpi_request->TaskType = type;
2068 mpi_request->TaskMID = cpu_to_le16(smid_task);
2069 int_to_scsilun(lun, (struct scsi_lun *)mpi_request->LUN);
2070 mpt2sas_scsih_set_tm_flag(ioc, handle);
2071 init_completion(&ioc->tm_cmds.done);
2072 mpt2sas_base_put_smid_hi_priority(ioc, smid);
2073 timeleft = wait_for_completion_timeout(&ioc->tm_cmds.done, timeout*HZ);
2074 if (!(ioc->tm_cmds.status & MPT2_CMD_COMPLETE)) {
2075 printk(MPT2SAS_ERR_FMT "%s: timeout\n",
2076 ioc->name, __func__);
2077 _debug_dump_mf(mpi_request,
2078 sizeof(Mpi2SCSITaskManagementRequest_t)/4);
2079 if (!(ioc->tm_cmds.status & MPT2_CMD_RESET)) {
2080 mpt2sas_base_hard_reset_handler(ioc, CAN_SLEEP,
2081 FORCE_BIG_HAMMER);
2082 rc = SUCCESS;
2083 ioc->tm_cmds.status = MPT2_CMD_NOT_USED;
2084 mpt2sas_scsih_clear_tm_flag(ioc, handle);
2085 goto err_out;
2086 }
2087 }
2088
2089 if (ioc->tm_cmds.status & MPT2_CMD_REPLY_VALID) {
2090 mpi_reply = ioc->tm_cmds.reply;
2091 dtmprintk(ioc, printk(MPT2SAS_INFO_FMT "complete tm: "
2092 "ioc_status(0x%04x), loginfo(0x%08x), term_count(0x%08x)\n",
2093 ioc->name, le16_to_cpu(mpi_reply->IOCStatus),
2094 le32_to_cpu(mpi_reply->IOCLogInfo),
2095 le32_to_cpu(mpi_reply->TerminationCount)));
2096 if (ioc->logging_level & MPT_DEBUG_TM) {
2097 _scsih_response_code(ioc, mpi_reply->ResponseCode);
2098 if (mpi_reply->IOCStatus)
2099 _debug_dump_mf(mpi_request,
2100 sizeof(Mpi2SCSITaskManagementRequest_t)/4);
2101 }
2102 }
2103
2104 /* sanity check:
2105 * Check to see the commands were terminated.
2106 * This is only needed for eh callbacks, hence the scmd check.
2107 */
2108 rc = FAILED;
2109 if (scmd == NULL)
2110 goto bypass_sanity_checks;
2111 switch (type) {
2112 case MPI2_SCSITASKMGMT_TASKTYPE_ABORT_TASK:
2113 scmd_lookup = _scsih_scsi_lookup_get(ioc, smid_task);
2114 if (scmd_lookup && (scmd_lookup->serial_number ==
2115 scmd->serial_number))
2116 rc = FAILED;
2117 else
2118 rc = SUCCESS;
2119 break;
2120
2121 case MPI2_SCSITASKMGMT_TASKTYPE_TARGET_RESET:
2122 if (_scsih_scsi_lookup_find_by_target(ioc, id, channel))
2123 rc = FAILED;
2124 else
2125 rc = SUCCESS;
2126 break;
2127
2128 case MPI2_SCSITASKMGMT_TASKTYPE_LOGICAL_UNIT_RESET:
2129 if (_scsih_scsi_lookup_find_by_lun(ioc, id, lun, channel))
2130 rc = FAILED;
2131 else
2132 rc = SUCCESS;
2133 break;
2134 }
2135
2136 bypass_sanity_checks:
2137
2138 mpt2sas_scsih_clear_tm_flag(ioc, handle);
2139 ioc->tm_cmds.status = MPT2_CMD_NOT_USED;
2140 mutex_unlock(&ioc->tm_cmds.mutex);
2141
2142 return rc;
2143
2144 err_out:
2145 mutex_unlock(&ioc->tm_cmds.mutex);
2146 return rc;
2147 }
2148
2149 /**
2150 * _scsih_tm_display_info - displays info about the device
2151 * @ioc: per adapter struct
2152 * @scmd: pointer to scsi command object
2153 *
2154 * Called by task management callback handlers.
2155 */
2156 static void
2157 _scsih_tm_display_info(struct MPT2SAS_ADAPTER *ioc, struct scsi_cmnd *scmd)
2158 {
2159 struct scsi_target *starget = scmd->device->sdev_target;
2160 struct MPT2SAS_TARGET *priv_target = starget->hostdata;
2161 struct _sas_device *sas_device = NULL;
2162 unsigned long flags;
2163
2164 if (!priv_target)
2165 return;
2166
2167 scsi_print_command(scmd);
2168 if (priv_target->flags & MPT_TARGET_FLAGS_VOLUME) {
2169 starget_printk(KERN_INFO, starget, "volume handle(0x%04x), "
2170 "volume wwid(0x%016llx)\n",
2171 priv_target->handle,
2172 (unsigned long long)priv_target->sas_address);
2173 } else {
2174 spin_lock_irqsave(&ioc->sas_device_lock, flags);
2175 sas_device = mpt2sas_scsih_sas_device_find_by_sas_address(ioc,
2176 priv_target->sas_address);
2177 if (sas_device) {
2178 if (priv_target->flags &
2179 MPT_TARGET_FLAGS_RAID_COMPONENT) {
2180 starget_printk(KERN_INFO, starget,
2181 "volume handle(0x%04x), "
2182 "volume wwid(0x%016llx)\n",
2183 sas_device->volume_handle,
2184 (unsigned long long)sas_device->volume_wwid);
2185 }
2186 starget_printk(KERN_INFO, starget,
2187 "handle(0x%04x), sas_address(0x%016llx), phy(%d)\n",
2188 sas_device->handle,
2189 (unsigned long long)sas_device->sas_address,
2190 sas_device->phy);
2191 starget_printk(KERN_INFO, starget,
2192 "enclosure_logical_id(0x%016llx), slot(%d)\n",
2193 (unsigned long long)sas_device->enclosure_logical_id,
2194 sas_device->slot);
2195 }
2196 spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
2197 }
2198 }
2199
2200 /**
2201 * _scsih_abort - eh threads main abort routine
2202 * @scmd: pointer to scsi command object
2203 *
2204 * Returns SUCCESS if command aborted else FAILED
2205 */
2206 static int
2207 _scsih_abort(struct scsi_cmnd *scmd)
2208 {
2209 struct MPT2SAS_ADAPTER *ioc = shost_priv(scmd->device->host);
2210 struct MPT2SAS_DEVICE *sas_device_priv_data;
2211 u16 smid;
2212 u16 handle;
2213 int r;
2214
2215 sdev_printk(KERN_INFO, scmd->device, "attempting task abort! "
2216 "scmd(%p)\n", scmd);
2217 _scsih_tm_display_info(ioc, scmd);
2218
2219 sas_device_priv_data = scmd->device->hostdata;
2220 if (!sas_device_priv_data || !sas_device_priv_data->sas_target) {
2221 sdev_printk(KERN_INFO, scmd->device, "device been deleted! "
2222 "scmd(%p)\n", scmd);
2223 scmd->result = DID_NO_CONNECT << 16;
2224 scmd->scsi_done(scmd);
2225 r = SUCCESS;
2226 goto out;
2227 }
2228
2229 /* search for the command */
2230 smid = _scsih_scsi_lookup_find_by_scmd(ioc, scmd);
2231 if (!smid) {
2232 scmd->result = DID_RESET << 16;
2233 r = SUCCESS;
2234 goto out;
2235 }
2236
2237 /* for hidden raid components and volumes this is not supported */
2238 if (sas_device_priv_data->sas_target->flags &
2239 MPT_TARGET_FLAGS_RAID_COMPONENT ||
2240 sas_device_priv_data->sas_target->flags & MPT_TARGET_FLAGS_VOLUME) {
2241 scmd->result = DID_RESET << 16;
2242 r = FAILED;
2243 goto out;
2244 }
2245
2246 mpt2sas_halt_firmware(ioc);
2247
2248 handle = sas_device_priv_data->sas_target->handle;
2249 r = mpt2sas_scsih_issue_tm(ioc, handle, scmd->device->channel,
2250 scmd->device->id, scmd->device->lun,
2251 MPI2_SCSITASKMGMT_TASKTYPE_ABORT_TASK, smid, 30, scmd);
2252
2253 out:
2254 sdev_printk(KERN_INFO, scmd->device, "task abort: %s scmd(%p)\n",
2255 ((r == SUCCESS) ? "SUCCESS" : "FAILED"), scmd);
2256 return r;
2257 }
2258
2259 /**
2260 * _scsih_dev_reset - eh threads main device reset routine
2261 * @scmd: pointer to scsi command object
2262 *
2263 * Returns SUCCESS if command aborted else FAILED
2264 */
2265 static int
2266 _scsih_dev_reset(struct scsi_cmnd *scmd)
2267 {
2268 struct MPT2SAS_ADAPTER *ioc = shost_priv(scmd->device->host);
2269 struct MPT2SAS_DEVICE *sas_device_priv_data;
2270 struct _sas_device *sas_device;
2271 unsigned long flags;
2272 u16 handle;
2273 int r;
2274
2275 struct scsi_target *starget = scmd->device->sdev_target;
2276
2277 starget_printk(KERN_INFO, starget, "attempting device reset! "
2278 "scmd(%p)\n", scmd);
2279 _scsih_tm_display_info(ioc, scmd);
2280
2281 sas_device_priv_data = scmd->device->hostdata;
2282 if (!sas_device_priv_data || !sas_device_priv_data->sas_target) {
2283 starget_printk(KERN_INFO, starget, "device been deleted! "
2284 "scmd(%p)\n", scmd);
2285 scmd->result = DID_NO_CONNECT << 16;
2286 scmd->scsi_done(scmd);
2287 r = SUCCESS;
2288 goto out;
2289 }
2290
2291 /* for hidden raid components obtain the volume_handle */
2292 handle = 0;
2293 if (sas_device_priv_data->sas_target->flags &
2294 MPT_TARGET_FLAGS_RAID_COMPONENT) {
2295 spin_lock_irqsave(&ioc->sas_device_lock, flags);
2296 sas_device = _scsih_sas_device_find_by_handle(ioc,
2297 sas_device_priv_data->sas_target->handle);
2298 if (sas_device)
2299 handle = sas_device->volume_handle;
2300 spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
2301 } else
2302 handle = sas_device_priv_data->sas_target->handle;
2303
2304 if (!handle) {
2305 scmd->result = DID_RESET << 16;
2306 r = FAILED;
2307 goto out;
2308 }
2309
2310 r = mpt2sas_scsih_issue_tm(ioc, handle, scmd->device->channel,
2311 scmd->device->id, scmd->device->lun,
2312 MPI2_SCSITASKMGMT_TASKTYPE_LOGICAL_UNIT_RESET, 0, 30, scmd);
2313
2314 out:
2315 sdev_printk(KERN_INFO, scmd->device, "device reset: %s scmd(%p)\n",
2316 ((r == SUCCESS) ? "SUCCESS" : "FAILED"), scmd);
2317 return r;
2318 }
2319
2320 /**
2321 * _scsih_target_reset - eh threads main target reset routine
2322 * @scmd: pointer to scsi command object
2323 *
2324 * Returns SUCCESS if command aborted else FAILED
2325 */
2326 static int
2327 _scsih_target_reset(struct scsi_cmnd *scmd)
2328 {
2329 struct MPT2SAS_ADAPTER *ioc = shost_priv(scmd->device->host);
2330 struct MPT2SAS_DEVICE *sas_device_priv_data;
2331 struct _sas_device *sas_device;
2332 unsigned long flags;
2333 u16 handle;
2334 int r;
2335 struct scsi_target *starget = scmd->device->sdev_target;
2336
2337 starget_printk(KERN_INFO, starget, "attempting target reset! "
2338 "scmd(%p)\n", scmd);
2339 _scsih_tm_display_info(ioc, scmd);
2340
2341 sas_device_priv_data = scmd->device->hostdata;
2342 if (!sas_device_priv_data || !sas_device_priv_data->sas_target) {
2343 starget_printk(KERN_INFO, starget, "target been deleted! "
2344 "scmd(%p)\n", scmd);
2345 scmd->result = DID_NO_CONNECT << 16;
2346 scmd->scsi_done(scmd);
2347 r = SUCCESS;
2348 goto out;
2349 }
2350
2351 /* for hidden raid components obtain the volume_handle */
2352 handle = 0;
2353 if (sas_device_priv_data->sas_target->flags &
2354 MPT_TARGET_FLAGS_RAID_COMPONENT) {
2355 spin_lock_irqsave(&ioc->sas_device_lock, flags);
2356 sas_device = _scsih_sas_device_find_by_handle(ioc,
2357 sas_device_priv_data->sas_target->handle);
2358 if (sas_device)
2359 handle = sas_device->volume_handle;
2360 spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
2361 } else
2362 handle = sas_device_priv_data->sas_target->handle;
2363
2364 if (!handle) {
2365 scmd->result = DID_RESET << 16;
2366 r = FAILED;
2367 goto out;
2368 }
2369
2370 r = mpt2sas_scsih_issue_tm(ioc, handle, scmd->device->channel,
2371 scmd->device->id, 0, MPI2_SCSITASKMGMT_TASKTYPE_TARGET_RESET, 0,
2372 30, scmd);
2373
2374 out:
2375 starget_printk(KERN_INFO, starget, "target reset: %s scmd(%p)\n",
2376 ((r == SUCCESS) ? "SUCCESS" : "FAILED"), scmd);
2377 return r;
2378 }
2379
2380 /**
2381 * _scsih_host_reset - eh threads main host reset routine
2382 * @scmd: pointer to scsi command object
2383 *
2384 * Returns SUCCESS if command aborted else FAILED
2385 */
2386 static int
2387 _scsih_host_reset(struct scsi_cmnd *scmd)
2388 {
2389 struct MPT2SAS_ADAPTER *ioc = shost_priv(scmd->device->host);
2390 int r, retval;
2391
2392 printk(MPT2SAS_INFO_FMT "attempting host reset! scmd(%p)\n",
2393 ioc->name, scmd);
2394 scsi_print_command(scmd);
2395
2396 retval = mpt2sas_base_hard_reset_handler(ioc, CAN_SLEEP,
2397 FORCE_BIG_HAMMER);
2398 r = (retval < 0) ? FAILED : SUCCESS;
2399 printk(MPT2SAS_INFO_FMT "host reset: %s scmd(%p)\n",
2400 ioc->name, ((r == SUCCESS) ? "SUCCESS" : "FAILED"), scmd);
2401
2402 return r;
2403 }
2404
2405 /**
2406 * _scsih_fw_event_add - insert and queue up fw_event
2407 * @ioc: per adapter object
2408 * @fw_event: object describing the event
2409 * Context: This function will acquire ioc->fw_event_lock.
2410 *
2411 * This adds the firmware event object into link list, then queues it up to
2412 * be processed from user context.
2413 *
2414 * Return nothing.
2415 */
2416 static void
2417 _scsih_fw_event_add(struct MPT2SAS_ADAPTER *ioc, struct fw_event_work *fw_event)
2418 {
2419 unsigned long flags;
2420
2421 if (ioc->firmware_event_thread == NULL)
2422 return;
2423
2424 spin_lock_irqsave(&ioc->fw_event_lock, flags);
2425 list_add_tail(&fw_event->list, &ioc->fw_event_list);
2426 INIT_DELAYED_WORK(&fw_event->delayed_work, _firmware_event_work);
2427 queue_delayed_work(ioc->firmware_event_thread,
2428 &fw_event->delayed_work, 0);
2429 spin_unlock_irqrestore(&ioc->fw_event_lock, flags);
2430 }
2431
2432 /**
2433 * _scsih_fw_event_free - delete fw_event
2434 * @ioc: per adapter object
2435 * @fw_event: object describing the event
2436 * Context: This function will acquire ioc->fw_event_lock.
2437 *
2438 * This removes firmware event object from link list, frees associated memory.
2439 *
2440 * Return nothing.
2441 */
2442 static void
2443 _scsih_fw_event_free(struct MPT2SAS_ADAPTER *ioc, struct fw_event_work
2444 *fw_event)
2445 {
2446 unsigned long flags;
2447
2448 spin_lock_irqsave(&ioc->fw_event_lock, flags);
2449 list_del(&fw_event->list);
2450 kfree(fw_event->event_data);
2451 kfree(fw_event);
2452 spin_unlock_irqrestore(&ioc->fw_event_lock, flags);
2453 }
2454
2455
2456 /**
2457 * _scsih_queue_rescan - queue a topology rescan from user context
2458 * @ioc: per adapter object
2459 *
2460 * Return nothing.
2461 */
2462 static void
2463 _scsih_queue_rescan(struct MPT2SAS_ADAPTER *ioc)
2464 {
2465 struct fw_event_work *fw_event;
2466
2467 if (ioc->wait_for_port_enable_to_complete)
2468 return;
2469 fw_event = kzalloc(sizeof(struct fw_event_work), GFP_ATOMIC);
2470 if (!fw_event)
2471 return;
2472 fw_event->event = MPT2SAS_RESCAN_AFTER_HOST_RESET;
2473 fw_event->ioc = ioc;
2474 _scsih_fw_event_add(ioc, fw_event);
2475 }
2476
2477 /**
2478 * _scsih_fw_event_cleanup_queue - cleanup event queue
2479 * @ioc: per adapter object
2480 *
2481 * Walk the firmware event queue, either killing timers, or waiting
2482 * for outstanding events to complete
2483 *
2484 * Return nothing.
2485 */
2486 static void
2487 _scsih_fw_event_cleanup_queue(struct MPT2SAS_ADAPTER *ioc)
2488 {
2489 struct fw_event_work *fw_event, *next;
2490
2491 if (list_empty(&ioc->fw_event_list) ||
2492 !ioc->firmware_event_thread || in_interrupt())
2493 return;
2494
2495 list_for_each_entry_safe(fw_event, next, &ioc->fw_event_list, list) {
2496 if (cancel_delayed_work(&fw_event->delayed_work)) {
2497 _scsih_fw_event_free(ioc, fw_event);
2498 continue;
2499 }
2500 fw_event->cancel_pending_work = 1;
2501 }
2502 }
2503
2504 /**
2505 * _scsih_ublock_io_device - set the device state to SDEV_RUNNING
2506 * @ioc: per adapter object
2507 * @handle: device handle
2508 *
2509 * During device pull we need to appropiately set the sdev state.
2510 */
2511 static void
2512 _scsih_ublock_io_device(struct MPT2SAS_ADAPTER *ioc, u16 handle)
2513 {
2514 struct MPT2SAS_DEVICE *sas_device_priv_data;
2515 struct scsi_device *sdev;
2516
2517 shost_for_each_device(sdev, ioc->shost) {
2518 sas_device_priv_data = sdev->hostdata;
2519 if (!sas_device_priv_data)
2520 continue;
2521 if (!sas_device_priv_data->block)
2522 continue;
2523 if (sas_device_priv_data->sas_target->handle == handle) {
2524 dewtprintk(ioc, sdev_printk(KERN_INFO, sdev,
2525 MPT2SAS_INFO_FMT "SDEV_RUNNING: "
2526 "handle(0x%04x)\n", ioc->name, handle));
2527 sas_device_priv_data->block = 0;
2528 scsi_internal_device_unblock(sdev);
2529 }
2530 }
2531 }
2532
2533 /**
2534 * _scsih_block_io_device - set the device state to SDEV_BLOCK
2535 * @ioc: per adapter object
2536 * @handle: device handle
2537 *
2538 * During device pull we need to appropiately set the sdev state.
2539 */
2540 static void
2541 _scsih_block_io_device(struct MPT2SAS_ADAPTER *ioc, u16 handle)
2542 {
2543 struct MPT2SAS_DEVICE *sas_device_priv_data;
2544 struct scsi_device *sdev;
2545
2546 shost_for_each_device(sdev, ioc->shost) {
2547 sas_device_priv_data = sdev->hostdata;
2548 if (!sas_device_priv_data)
2549 continue;
2550 if (sas_device_priv_data->block)
2551 continue;
2552 if (sas_device_priv_data->sas_target->handle == handle) {
2553 dewtprintk(ioc, sdev_printk(KERN_INFO, sdev,
2554 MPT2SAS_INFO_FMT "SDEV_BLOCK: "
2555 "handle(0x%04x)\n", ioc->name, handle));
2556 sas_device_priv_data->block = 1;
2557 scsi_internal_device_block(sdev);
2558 }
2559 }
2560 }
2561
2562 /**
2563 * _scsih_block_io_to_children_attached_to_ex
2564 * @ioc: per adapter object
2565 * @sas_expander: the sas_device object
2566 *
2567 * This routine set sdev state to SDEV_BLOCK for all devices
2568 * attached to this expander. This function called when expander is
2569 * pulled.
2570 */
2571 static void
2572 _scsih_block_io_to_children_attached_to_ex(struct MPT2SAS_ADAPTER *ioc,
2573 struct _sas_node *sas_expander)
2574 {
2575 struct _sas_port *mpt2sas_port;
2576 struct _sas_device *sas_device;
2577 struct _sas_node *expander_sibling;
2578 unsigned long flags;
2579
2580 if (!sas_expander)
2581 return;
2582
2583 list_for_each_entry(mpt2sas_port,
2584 &sas_expander->sas_port_list, port_list) {
2585 if (mpt2sas_port->remote_identify.device_type ==
2586 SAS_END_DEVICE) {
2587 spin_lock_irqsave(&ioc->sas_device_lock, flags);
2588 sas_device =
2589 mpt2sas_scsih_sas_device_find_by_sas_address(ioc,
2590 mpt2sas_port->remote_identify.sas_address);
2591 spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
2592 if (!sas_device)
2593 continue;
2594 _scsih_block_io_device(ioc, sas_device->handle);
2595 }
2596 }
2597
2598 list_for_each_entry(mpt2sas_port,
2599 &sas_expander->sas_port_list, port_list) {
2600
2601 if (mpt2sas_port->remote_identify.device_type ==
2602 SAS_EDGE_EXPANDER_DEVICE ||
2603 mpt2sas_port->remote_identify.device_type ==
2604 SAS_FANOUT_EXPANDER_DEVICE) {
2605
2606 spin_lock_irqsave(&ioc->sas_node_lock, flags);
2607 expander_sibling =
2608 mpt2sas_scsih_expander_find_by_sas_address(
2609 ioc, mpt2sas_port->remote_identify.sas_address);
2610 spin_unlock_irqrestore(&ioc->sas_node_lock, flags);
2611 _scsih_block_io_to_children_attached_to_ex(ioc,
2612 expander_sibling);
2613 }
2614 }
2615 }
2616
2617 /**
2618 * _scsih_block_io_to_children_attached_directly
2619 * @ioc: per adapter object
2620 * @event_data: topology change event data
2621 *
2622 * This routine set sdev state to SDEV_BLOCK for all devices
2623 * direct attached during device pull.
2624 */
2625 static void
2626 _scsih_block_io_to_children_attached_directly(struct MPT2SAS_ADAPTER *ioc,
2627 Mpi2EventDataSasTopologyChangeList_t *event_data)
2628 {
2629 int i;
2630 u16 handle;
2631 u16 reason_code;
2632 u8 phy_number;
2633
2634 for (i = 0; i < event_data->NumEntries; i++) {
2635 handle = le16_to_cpu(event_data->PHY[i].AttachedDevHandle);
2636 if (!handle)
2637 continue;
2638 phy_number = event_data->StartPhyNum + i;
2639 reason_code = event_data->PHY[i].PhyStatus &
2640 MPI2_EVENT_SAS_TOPO_RC_MASK;
2641 if (reason_code == MPI2_EVENT_SAS_TOPO_RC_DELAY_NOT_RESPONDING)
2642 _scsih_block_io_device(ioc, handle);
2643 }
2644 }
2645
2646 /**
2647 * _scsih_tm_tr_send - send task management request
2648 * @ioc: per adapter object
2649 * @handle: device handle
2650 * Context: interrupt time.
2651 *
2652 * This code is to initiate the device removal handshake protocal
2653 * with controller firmware. This function will issue target reset
2654 * using high priority request queue. It will send a sas iounit
2655 * controll request (MPI2_SAS_OP_REMOVE_DEVICE) from this completion.
2656 *
2657 * This is designed to send muliple task management request at the same
2658 * time to the fifo. If the fifo is full, we will append the request,
2659 * and process it in a future completion.
2660 */
2661 static void
2662 _scsih_tm_tr_send(struct MPT2SAS_ADAPTER *ioc, u16 handle)
2663 {
2664 Mpi2SCSITaskManagementRequest_t *mpi_request;
2665 u16 smid;
2666 struct _sas_device *sas_device;
2667 struct MPT2SAS_TARGET *sas_target_priv_data;
2668 unsigned long flags;
2669 struct _tr_list *delayed_tr;
2670
2671 if (ioc->shost_recovery || ioc->remove_host ||
2672 ioc->pci_error_recovery) {
2673 dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: host reset in "
2674 "progress!\n", __func__, ioc->name));
2675 return;
2676 }
2677
2678 /* if PD, then return */
2679 if (test_bit(handle, ioc->pd_handles))
2680 return;
2681
2682 spin_lock_irqsave(&ioc->sas_device_lock, flags);
2683 sas_device = _scsih_sas_device_find_by_handle(ioc, handle);
2684 if (sas_device && sas_device->starget &&
2685 sas_device->starget->hostdata) {
2686 sas_target_priv_data = sas_device->starget->hostdata;
2687 sas_target_priv_data->deleted = 1;
2688 dewtprintk(ioc, printk(MPT2SAS_INFO_FMT
2689 "setting delete flag: handle(0x%04x), "
2690 "sas_addr(0x%016llx)\n", ioc->name, handle,
2691 (unsigned long long) sas_device->sas_address));
2692 }
2693 spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
2694
2695 smid = mpt2sas_base_get_smid_hpr(ioc, ioc->tm_tr_cb_idx);
2696 if (!smid) {
2697 delayed_tr = kzalloc(sizeof(*delayed_tr), GFP_ATOMIC);
2698 if (!delayed_tr)
2699 return;
2700 INIT_LIST_HEAD(&delayed_tr->list);
2701 delayed_tr->handle = handle;
2702 list_add_tail(&delayed_tr->list, &ioc->delayed_tr_list);
2703 dewtprintk(ioc, printk(MPT2SAS_INFO_FMT
2704 "DELAYED:tr:handle(0x%04x), (open)\n",
2705 ioc->name, handle));
2706 return;
2707 }
2708
2709 dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "tr_send:handle(0x%04x), "
2710 "(open), smid(%d), cb(%d)\n", ioc->name, handle, smid,
2711 ioc->tm_tr_cb_idx));
2712 mpi_request = mpt2sas_base_get_msg_frame(ioc, smid);
2713 memset(mpi_request, 0, sizeof(Mpi2SCSITaskManagementRequest_t));
2714 mpi_request->Function = MPI2_FUNCTION_SCSI_TASK_MGMT;
2715 mpi_request->DevHandle = cpu_to_le16(handle);
2716 mpi_request->TaskType = MPI2_SCSITASKMGMT_TASKTYPE_TARGET_RESET;
2717 mpt2sas_base_put_smid_hi_priority(ioc, smid);
2718 }
2719
2720
2721
2722 /**
2723 * _scsih_sas_control_complete - completion routine
2724 * @ioc: per adapter object
2725 * @smid: system request message index
2726 * @msix_index: MSIX table index supplied by the OS
2727 * @reply: reply message frame(lower 32bit addr)
2728 * Context: interrupt time.
2729 *
2730 * This is the sas iounit controll completion routine.
2731 * This code is part of the code to initiate the device removal
2732 * handshake protocal with controller firmware.
2733 *
2734 * Return 1 meaning mf should be freed from _base_interrupt
2735 * 0 means the mf is freed from this function.
2736 */
2737 static u8
2738 _scsih_sas_control_complete(struct MPT2SAS_ADAPTER *ioc, u16 smid,
2739 u8 msix_index, u32 reply)
2740 {
2741 #ifdef CONFIG_SCSI_MPT2SAS_LOGGING
2742 Mpi2SasIoUnitControlReply_t *mpi_reply =
2743 mpt2sas_base_get_reply_virt_addr(ioc, reply);
2744 #endif
2745 dewtprintk(ioc, printk(MPT2SAS_INFO_FMT
2746 "sc_complete:handle(0x%04x), (open) "
2747 "smid(%d), ioc_status(0x%04x), loginfo(0x%08x)\n",
2748 ioc->name, le16_to_cpu(mpi_reply->DevHandle), smid,
2749 le16_to_cpu(mpi_reply->IOCStatus),
2750 le32_to_cpu(mpi_reply->IOCLogInfo)));
2751 return 1;
2752 }
2753
2754 /**
2755 * _scsih_tm_tr_volume_send - send target reset request for volumes
2756 * @ioc: per adapter object
2757 * @handle: device handle
2758 * Context: interrupt time.
2759 *
2760 * This is designed to send muliple task management request at the same
2761 * time to the fifo. If the fifo is full, we will append the request,
2762 * and process it in a future completion.
2763 */
2764 static void
2765 _scsih_tm_tr_volume_send(struct MPT2SAS_ADAPTER *ioc, u16 handle)
2766 {
2767 Mpi2SCSITaskManagementRequest_t *mpi_request;
2768 u16 smid;
2769 struct _tr_list *delayed_tr;
2770
2771 if (ioc->shost_recovery || ioc->remove_host ||
2772 ioc->pci_error_recovery) {
2773 dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: host reset in "
2774 "progress!\n", __func__, ioc->name));
2775 return;
2776 }
2777
2778 smid = mpt2sas_base_get_smid_hpr(ioc, ioc->tm_tr_volume_cb_idx);
2779 if (!smid) {
2780 delayed_tr = kzalloc(sizeof(*delayed_tr), GFP_ATOMIC);
2781 if (!delayed_tr)
2782 return;
2783 INIT_LIST_HEAD(&delayed_tr->list);
2784 delayed_tr->handle = handle;
2785 list_add_tail(&delayed_tr->list, &ioc->delayed_tr_volume_list);
2786 dewtprintk(ioc, printk(MPT2SAS_INFO_FMT
2787 "DELAYED:tr:handle(0x%04x), (open)\n",
2788 ioc->name, handle));
2789 return;
2790 }
2791
2792 dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "tr_send:handle(0x%04x), "
2793 "(open), smid(%d), cb(%d)\n", ioc->name, handle, smid,
2794 ioc->tm_tr_volume_cb_idx));
2795 mpi_request = mpt2sas_base_get_msg_frame(ioc, smid);
2796 memset(mpi_request, 0, sizeof(Mpi2SCSITaskManagementRequest_t));
2797 mpi_request->Function = MPI2_FUNCTION_SCSI_TASK_MGMT;
2798 mpi_request->DevHandle = cpu_to_le16(handle);
2799 mpi_request->TaskType = MPI2_SCSITASKMGMT_TASKTYPE_TARGET_RESET;
2800 mpt2sas_base_put_smid_hi_priority(ioc, smid);
2801 }
2802
2803 /**
2804 * _scsih_tm_volume_tr_complete - target reset completion
2805 * @ioc: per adapter object
2806 * @smid: system request message index
2807 * @msix_index: MSIX table index supplied by the OS
2808 * @reply: reply message frame(lower 32bit addr)
2809 * Context: interrupt time.
2810 *
2811 * Return 1 meaning mf should be freed from _base_interrupt
2812 * 0 means the mf is freed from this function.
2813 */
2814 static u8
2815 _scsih_tm_volume_tr_complete(struct MPT2SAS_ADAPTER *ioc, u16 smid,
2816 u8 msix_index, u32 reply)
2817 {
2818 u16 handle;
2819 Mpi2SCSITaskManagementRequest_t *mpi_request_tm;
2820 Mpi2SCSITaskManagementReply_t *mpi_reply =
2821 mpt2sas_base_get_reply_virt_addr(ioc, reply);
2822
2823 if (ioc->shost_recovery || ioc->remove_host ||
2824 ioc->pci_error_recovery) {
2825 dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: host reset in "
2826 "progress!\n", __func__, ioc->name));
2827 return 1;
2828 }
2829
2830 mpi_request_tm = mpt2sas_base_get_msg_frame(ioc, smid);
2831 handle = le16_to_cpu(mpi_request_tm->DevHandle);
2832 if (handle != le16_to_cpu(mpi_reply->DevHandle)) {
2833 dewtprintk(ioc, printk("spurious interrupt: "
2834 "handle(0x%04x:0x%04x), smid(%d)!!!\n", handle,
2835 le16_to_cpu(mpi_reply->DevHandle), smid));
2836 return 0;
2837 }
2838
2839 dewtprintk(ioc, printk(MPT2SAS_INFO_FMT
2840 "tr_complete:handle(0x%04x), (open) smid(%d), ioc_status(0x%04x), "
2841 "loginfo(0x%08x), completed(%d)\n", ioc->name,
2842 handle, smid, le16_to_cpu(mpi_reply->IOCStatus),
2843 le32_to_cpu(mpi_reply->IOCLogInfo),
2844 le32_to_cpu(mpi_reply->TerminationCount)));
2845
2846 return _scsih_check_for_pending_tm(ioc, smid);
2847 }
2848
2849 /**
2850 * _scsih_tm_tr_complete -
2851 * @ioc: per adapter object
2852 * @smid: system request message index
2853 * @msix_index: MSIX table index supplied by the OS
2854 * @reply: reply message frame(lower 32bit addr)
2855 * Context: interrupt time.
2856 *
2857 * This is the target reset completion routine.
2858 * This code is part of the code to initiate the device removal
2859 * handshake protocal with controller firmware.
2860 * It will send a sas iounit controll request (MPI2_SAS_OP_REMOVE_DEVICE)
2861 *
2862 * Return 1 meaning mf should be freed from _base_interrupt
2863 * 0 means the mf is freed from this function.
2864 */
2865 static u8
2866 _scsih_tm_tr_complete(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 msix_index,
2867 u32 reply)
2868 {
2869 u16 handle;
2870 Mpi2SCSITaskManagementRequest_t *mpi_request_tm;
2871 Mpi2SCSITaskManagementReply_t *mpi_reply =
2872 mpt2sas_base_get_reply_virt_addr(ioc, reply);
2873 Mpi2SasIoUnitControlRequest_t *mpi_request;
2874 u16 smid_sas_ctrl;
2875
2876 if (ioc->shost_recovery || ioc->remove_host ||
2877 ioc->pci_error_recovery) {
2878 dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: host reset in "
2879 "progress!\n", __func__, ioc->name));
2880 return 1;
2881 }
2882
2883 mpi_request_tm = mpt2sas_base_get_msg_frame(ioc, smid);
2884 handle = le16_to_cpu(mpi_request_tm->DevHandle);
2885 if (handle != le16_to_cpu(mpi_reply->DevHandle)) {
2886 dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "spurious interrupt: "
2887 "handle(0x%04x:0x%04x), smid(%d)!!!\n", ioc->name, handle,
2888 le16_to_cpu(mpi_reply->DevHandle), smid));
2889 return 0;
2890 }
2891
2892 dewtprintk(ioc, printk(MPT2SAS_INFO_FMT
2893 "tr_complete:handle(0x%04x), (open) smid(%d), ioc_status(0x%04x), "
2894 "loginfo(0x%08x), completed(%d)\n", ioc->name,
2895 handle, smid, le16_to_cpu(mpi_reply->IOCStatus),
2896 le32_to_cpu(mpi_reply->IOCLogInfo),
2897 le32_to_cpu(mpi_reply->TerminationCount)));
2898
2899 smid_sas_ctrl = mpt2sas_base_get_smid(ioc, ioc->tm_sas_control_cb_idx);
2900 if (!smid_sas_ctrl) {
2901 printk(MPT2SAS_ERR_FMT "%s: failed obtaining a smid\n",
2902 ioc->name, __func__);
2903 return 1;
2904 }
2905
2906 dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "sc_send:handle(0x%04x), "
2907 "(open), smid(%d), cb(%d)\n", ioc->name, handle, smid_sas_ctrl,
2908 ioc->tm_sas_control_cb_idx));
2909 mpi_request = mpt2sas_base_get_msg_frame(ioc, smid_sas_ctrl);
2910 memset(mpi_request, 0, sizeof(Mpi2SasIoUnitControlRequest_t));
2911 mpi_request->Function = MPI2_FUNCTION_SAS_IO_UNIT_CONTROL;
2912 mpi_request->Operation = MPI2_SAS_OP_REMOVE_DEVICE;
2913 mpi_request->DevHandle = mpi_request_tm->DevHandle;
2914 mpt2sas_base_put_smid_default(ioc, smid_sas_ctrl);
2915
2916 return _scsih_check_for_pending_tm(ioc, smid);
2917 }
2918
2919 /**
2920 * _scsih_check_for_pending_tm - check for pending task management
2921 * @ioc: per adapter object
2922 * @smid: system request message index
2923 *
2924 * This will check delayed target reset list, and feed the
2925 * next reqeust.
2926 *
2927 * Return 1 meaning mf should be freed from _base_interrupt
2928 * 0 means the mf is freed from this function.
2929 */
2930 static u8
2931 _scsih_check_for_pending_tm(struct MPT2SAS_ADAPTER *ioc, u16 smid)
2932 {
2933 struct _tr_list *delayed_tr;
2934
2935 if (!list_empty(&ioc->delayed_tr_volume_list)) {
2936 delayed_tr = list_entry(ioc->delayed_tr_volume_list.next,
2937 struct _tr_list, list);
2938 mpt2sas_base_free_smid(ioc, smid);
2939 _scsih_tm_tr_volume_send(ioc, delayed_tr->handle);
2940 list_del(&delayed_tr->list);
2941 kfree(delayed_tr);
2942 return 0;
2943 }
2944
2945 if (!list_empty(&ioc->delayed_tr_list)) {
2946 delayed_tr = list_entry(ioc->delayed_tr_list.next,
2947 struct _tr_list, list);
2948 mpt2sas_base_free_smid(ioc, smid);
2949 _scsih_tm_tr_send(ioc, delayed_tr->handle);
2950 list_del(&delayed_tr->list);
2951 kfree(delayed_tr);
2952 return 0;
2953 }
2954
2955 return 1;
2956 }
2957
2958 /**
2959 * _scsih_check_topo_delete_events - sanity check on topo events
2960 * @ioc: per adapter object
2961 * @event_data: the event data payload
2962 *
2963 * This routine added to better handle cable breaker.
2964 *
2965 * This handles the case where driver recieves multiple expander
2966 * add and delete events in a single shot. When there is a delete event
2967 * the routine will void any pending add events waiting in the event queue.
2968 *
2969 * Return nothing.
2970 */
2971 static void
2972 _scsih_check_topo_delete_events(struct MPT2SAS_ADAPTER *ioc,
2973 Mpi2EventDataSasTopologyChangeList_t *event_data)
2974 {
2975 struct fw_event_work *fw_event;
2976 Mpi2EventDataSasTopologyChangeList_t *local_event_data;
2977 u16 expander_handle;
2978 struct _sas_node *sas_expander;
2979 unsigned long flags;
2980 int i, reason_code;
2981 u16 handle;
2982
2983 for (i = 0 ; i < event_data->NumEntries; i++) {
2984 if (event_data->PHY[i].PhyStatus &
2985 MPI2_EVENT_SAS_TOPO_PHYSTATUS_VACANT)
2986 continue;
2987 handle = le16_to_cpu(event_data->PHY[i].AttachedDevHandle);
2988 if (!handle)
2989 continue;
2990 reason_code = event_data->PHY[i].PhyStatus &
2991 MPI2_EVENT_SAS_TOPO_RC_MASK;
2992 if (reason_code == MPI2_EVENT_SAS_TOPO_RC_TARG_NOT_RESPONDING)
2993 _scsih_tm_tr_send(ioc, handle);
2994 }
2995
2996 expander_handle = le16_to_cpu(event_data->ExpanderDevHandle);
2997 if (expander_handle < ioc->sas_hba.num_phys) {
2998 _scsih_block_io_to_children_attached_directly(ioc, event_data);
2999 return;
3000 }
3001
3002 if (event_data->ExpStatus == MPI2_EVENT_SAS_TOPO_ES_DELAY_NOT_RESPONDING
3003 || event_data->ExpStatus == MPI2_EVENT_SAS_TOPO_ES_NOT_RESPONDING) {
3004 spin_lock_irqsave(&ioc->sas_node_lock, flags);
3005 sas_expander = mpt2sas_scsih_expander_find_by_handle(ioc,
3006 expander_handle);
3007 spin_unlock_irqrestore(&ioc->sas_node_lock, flags);
3008 _scsih_block_io_to_children_attached_to_ex(ioc, sas_expander);
3009 } else if (event_data->ExpStatus == MPI2_EVENT_SAS_TOPO_ES_RESPONDING)
3010 _scsih_block_io_to_children_attached_directly(ioc, event_data);
3011
3012 if (event_data->ExpStatus != MPI2_EVENT_SAS_TOPO_ES_NOT_RESPONDING)
3013 return;
3014
3015 /* mark ignore flag for pending events */
3016 spin_lock_irqsave(&ioc->fw_event_lock, flags);
3017 list_for_each_entry(fw_event, &ioc->fw_event_list, list) {
3018 if (fw_event->event != MPI2_EVENT_SAS_TOPOLOGY_CHANGE_LIST ||
3019 fw_event->ignore)
3020 continue;
3021 local_event_data = fw_event->event_data;
3022 if (local_event_data->ExpStatus ==
3023 MPI2_EVENT_SAS_TOPO_ES_ADDED ||
3024 local_event_data->ExpStatus ==
3025 MPI2_EVENT_SAS_TOPO_ES_RESPONDING) {
3026 if (le16_to_cpu(local_event_data->ExpanderDevHandle) ==
3027 expander_handle) {
3028 dewtprintk(ioc, printk(MPT2SAS_INFO_FMT
3029 "setting ignoring flag\n", ioc->name));
3030 fw_event->ignore = 1;
3031 }
3032 }
3033 }
3034 spin_unlock_irqrestore(&ioc->fw_event_lock, flags);
3035 }
3036
3037 /**
3038 * _scsih_set_volume_delete_flag - setting volume delete flag
3039 * @ioc: per adapter object
3040 * @handle: device handle
3041 *
3042 * This
3043 * Return nothing.
3044 */
3045 static void
3046 _scsih_set_volume_delete_flag(struct MPT2SAS_ADAPTER *ioc, u16 handle)
3047 {
3048 struct _raid_device *raid_device;
3049 struct MPT2SAS_TARGET *sas_target_priv_data;
3050 unsigned long flags;
3051
3052 spin_lock_irqsave(&ioc->raid_device_lock, flags);
3053 raid_device = _scsih_raid_device_find_by_handle(ioc, handle);
3054 if (raid_device && raid_device->starget &&
3055 raid_device->starget->hostdata) {
3056 sas_target_priv_data =
3057 raid_device->starget->hostdata;
3058 sas_target_priv_data->deleted = 1;
3059 dewtprintk(ioc, printk(MPT2SAS_INFO_FMT
3060 "setting delete flag: handle(0x%04x), "
3061 "wwid(0x%016llx)\n", ioc->name, handle,
3062 (unsigned long long) raid_device->wwid));
3063 }
3064 spin_unlock_irqrestore(&ioc->raid_device_lock, flags);
3065 }
3066
3067 /**
3068 * _scsih_set_volume_handle_for_tr - set handle for target reset to volume
3069 * @handle: input handle
3070 * @a: handle for volume a
3071 * @b: handle for volume b
3072 *
3073 * IR firmware only supports two raid volumes. The purpose of this
3074 * routine is to set the volume handle in either a or b. When the given
3075 * input handle is non-zero, or when a and b have not been set before.
3076 */
3077 static void
3078 _scsih_set_volume_handle_for_tr(u16 handle, u16 *a, u16 *b)
3079 {
3080 if (!handle || handle == *a || handle == *b)
3081 return;
3082 if (!*a)
3083 *a = handle;
3084 else if (!*b)
3085 *b = handle;
3086 }
3087
3088 /**
3089 * _scsih_check_ir_config_unhide_events - check for UNHIDE events
3090 * @ioc: per adapter object
3091 * @event_data: the event data payload
3092 * Context: interrupt time.
3093 *
3094 * This routine will send target reset to volume, followed by target
3095 * resets to the PDs. This is called when a PD has been removed, or
3096 * volume has been deleted or removed. When the target reset is sent
3097 * to volume, the PD target resets need to be queued to start upon
3098 * completion of the volume target reset.
3099 *
3100 * Return nothing.
3101 */
3102 static void
3103 _scsih_check_ir_config_unhide_events(struct MPT2SAS_ADAPTER *ioc,
3104 Mpi2EventDataIrConfigChangeList_t *event_data)
3105 {
3106 Mpi2EventIrConfigElement_t *element;
3107 int i;
3108 u16 handle, volume_handle, a, b;
3109 struct _tr_list *delayed_tr;
3110
3111 a = 0;
3112 b = 0;
3113
3114 /* Volume Resets for Deleted or Removed */
3115 element = (Mpi2EventIrConfigElement_t *)&event_data->ConfigElement[0];
3116 for (i = 0; i < event_data->NumElements; i++, element++) {
3117 if (element->ReasonCode ==
3118 MPI2_EVENT_IR_CHANGE_RC_VOLUME_DELETED ||
3119 element->ReasonCode ==
3120 MPI2_EVENT_IR_CHANGE_RC_REMOVED) {
3121 volume_handle = le16_to_cpu(element->VolDevHandle);
3122 _scsih_set_volume_delete_flag(ioc, volume_handle);
3123 _scsih_set_volume_handle_for_tr(volume_handle, &a, &b);
3124 }
3125 }
3126
3127 /* Volume Resets for UNHIDE events */
3128 element = (Mpi2EventIrConfigElement_t *)&event_data->ConfigElement[0];
3129 for (i = 0; i < event_data->NumElements; i++, element++) {
3130 if (le32_to_cpu(event_data->Flags) &
3131 MPI2_EVENT_IR_CHANGE_FLAGS_FOREIGN_CONFIG)
3132 continue;
3133 if (element->ReasonCode == MPI2_EVENT_IR_CHANGE_RC_UNHIDE) {
3134 volume_handle = le16_to_cpu(element->VolDevHandle);
3135 _scsih_set_volume_handle_for_tr(volume_handle, &a, &b);
3136 }
3137 }
3138
3139 if (a)
3140 _scsih_tm_tr_volume_send(ioc, a);
3141 if (b)
3142 _scsih_tm_tr_volume_send(ioc, b);
3143
3144 /* PD target resets */
3145 element = (Mpi2EventIrConfigElement_t *)&event_data->ConfigElement[0];
3146 for (i = 0; i < event_data->NumElements; i++, element++) {
3147 if (element->ReasonCode != MPI2_EVENT_IR_CHANGE_RC_UNHIDE)
3148 continue;
3149 handle = le16_to_cpu(element->PhysDiskDevHandle);
3150 volume_handle = le16_to_cpu(element->VolDevHandle);
3151 clear_bit(handle, ioc->pd_handles);
3152 if (!volume_handle)
3153 _scsih_tm_tr_send(ioc, handle);
3154 else if (volume_handle == a || volume_handle == b) {
3155 delayed_tr = kzalloc(sizeof(*delayed_tr), GFP_ATOMIC);
3156 BUG_ON(!delayed_tr);
3157 INIT_LIST_HEAD(&delayed_tr->list);
3158 delayed_tr->handle = handle;
3159 list_add_tail(&delayed_tr->list, &ioc->delayed_tr_list);
3160 dewtprintk(ioc, printk(MPT2SAS_INFO_FMT
3161 "DELAYED:tr:handle(0x%04x), (open)\n", ioc->name,
3162 handle));
3163 } else
3164 _scsih_tm_tr_send(ioc, handle);
3165 }
3166 }
3167
3168
3169 /**
3170 * _scsih_check_volume_delete_events - set delete flag for volumes
3171 * @ioc: per adapter object
3172 * @event_data: the event data payload
3173 * Context: interrupt time.
3174 *
3175 * This will handle the case when the cable connected to entire volume is
3176 * pulled. We will take care of setting the deleted flag so normal IO will
3177 * not be sent.
3178 *
3179 * Return nothing.
3180 */
3181 static void
3182 _scsih_check_volume_delete_events(struct MPT2SAS_ADAPTER *ioc,
3183 Mpi2EventDataIrVolume_t *event_data)
3184 {
3185 u32 state;
3186
3187 if (event_data->ReasonCode != MPI2_EVENT_IR_VOLUME_RC_STATE_CHANGED)
3188 return;
3189 state = le32_to_cpu(event_data->NewValue);
3190 if (state == MPI2_RAID_VOL_STATE_MISSING || state ==
3191 MPI2_RAID_VOL_STATE_FAILED)
3192 _scsih_set_volume_delete_flag(ioc,
3193 le16_to_cpu(event_data->VolDevHandle));
3194 }
3195
3196 /**
3197 * _scsih_flush_running_cmds - completing outstanding commands.
3198 * @ioc: per adapter object
3199 *
3200 * The flushing out of all pending scmd commands following host reset,
3201 * where all IO is dropped to the floor.
3202 *
3203 * Return nothing.
3204 */
3205 static void
3206 _scsih_flush_running_cmds(struct MPT2SAS_ADAPTER *ioc)
3207 {
3208 struct scsi_cmnd *scmd;
3209 u16 smid;
3210 u16 count = 0;
3211
3212 for (smid = 1; smid <= ioc->scsiio_depth; smid++) {
3213 scmd = _scsih_scsi_lookup_get(ioc, smid);
3214 if (!scmd)
3215 continue;
3216 count++;
3217 mpt2sas_base_free_smid(ioc, smid);
3218 scsi_dma_unmap(scmd);
3219 if (ioc->pci_error_recovery)
3220 scmd->result = DID_NO_CONNECT << 16;
3221 else
3222 scmd->result = DID_RESET << 16;
3223 scmd->scsi_done(scmd);
3224 }
3225 dtmprintk(ioc, printk(MPT2SAS_INFO_FMT "completing %d cmds\n",
3226 ioc->name, count));
3227 }
3228
3229 /**
3230 * _scsih_setup_eedp - setup MPI request for EEDP transfer
3231 * @scmd: pointer to scsi command object
3232 * @mpi_request: pointer to the SCSI_IO reqest message frame
3233 *
3234 * Supporting protection 1 and 3.
3235 *
3236 * Returns nothing
3237 */
3238 static void
3239 _scsih_setup_eedp(struct scsi_cmnd *scmd, Mpi2SCSIIORequest_t *mpi_request)
3240 {
3241 u16 eedp_flags;
3242 unsigned char prot_op = scsi_get_prot_op(scmd);
3243 unsigned char prot_type = scsi_get_prot_type(scmd);
3244
3245 if (prot_type == SCSI_PROT_DIF_TYPE0 || prot_op == SCSI_PROT_NORMAL)
3246 return;
3247
3248 if (prot_op == SCSI_PROT_READ_STRIP)
3249 eedp_flags = MPI2_SCSIIO_EEDPFLAGS_CHECK_REMOVE_OP;
3250 else if (prot_op == SCSI_PROT_WRITE_INSERT)
3251 eedp_flags = MPI2_SCSIIO_EEDPFLAGS_INSERT_OP;
3252 else
3253 return;
3254
3255 switch (prot_type) {
3256 case SCSI_PROT_DIF_TYPE1:
3257
3258 /*
3259 * enable ref/guard checking
3260 * auto increment ref tag
3261 */
3262 eedp_flags |= MPI2_SCSIIO_EEDPFLAGS_INC_PRI_REFTAG |
3263 MPI2_SCSIIO_EEDPFLAGS_CHECK_REFTAG |
3264 MPI2_SCSIIO_EEDPFLAGS_CHECK_GUARD;
3265 mpi_request->CDB.EEDP32.PrimaryReferenceTag =
3266 cpu_to_be32(scsi_get_lba(scmd));
3267 break;
3268
3269 case SCSI_PROT_DIF_TYPE2:
3270
3271 eedp_flags |= MPI2_SCSIIO_EEDPFLAGS_INC_PRI_REFTAG |
3272 MPI2_SCSIIO_EEDPFLAGS_CHECK_REFTAG |
3273 MPI2_SCSIIO_EEDPFLAGS_CHECK_GUARD;
3274 break;
3275
3276 case SCSI_PROT_DIF_TYPE3:
3277
3278 /*
3279 * enable guard checking
3280 */
3281 eedp_flags |= MPI2_SCSIIO_EEDPFLAGS_CHECK_GUARD;
3282 break;
3283 }
3284 mpi_request->EEDPBlockSize = cpu_to_le32(scmd->device->sector_size);
3285 mpi_request->EEDPFlags = cpu_to_le16(eedp_flags);
3286 }
3287
3288 /**
3289 * _scsih_eedp_error_handling - return sense code for EEDP errors
3290 * @scmd: pointer to scsi command object
3291 * @ioc_status: ioc status
3292 *
3293 * Returns nothing
3294 */
3295 static void
3296 _scsih_eedp_error_handling(struct scsi_cmnd *scmd, u16 ioc_status)
3297 {
3298 u8 ascq;
3299 u8 sk;
3300 u8 host_byte;
3301
3302 switch (ioc_status) {
3303 case MPI2_IOCSTATUS_EEDP_GUARD_ERROR:
3304 ascq = 0x01;
3305 break;
3306 case MPI2_IOCSTATUS_EEDP_APP_TAG_ERROR:
3307 ascq = 0x02;
3308 break;
3309 case MPI2_IOCSTATUS_EEDP_REF_TAG_ERROR:
3310 ascq = 0x03;
3311 break;
3312 default:
3313 ascq = 0x00;
3314 break;
3315 }
3316
3317 if (scmd->sc_data_direction == DMA_TO_DEVICE) {
3318 sk = ILLEGAL_REQUEST;
3319 host_byte = DID_ABORT;
3320 } else {
3321 sk = ABORTED_COMMAND;
3322 host_byte = DID_OK;
3323 }
3324
3325 scsi_build_sense_buffer(0, scmd->sense_buffer, sk, 0x10, ascq);
3326 scmd->result = DRIVER_SENSE << 24 | (host_byte << 16) |
3327 SAM_STAT_CHECK_CONDITION;
3328 }
3329
3330 /**
3331 * _scsih_qcmd - main scsi request entry point
3332 * @scmd: pointer to scsi command object
3333 * @done: function pointer to be invoked on completion
3334 *
3335 * The callback index is set inside `ioc->scsi_io_cb_idx`.
3336 *
3337 * Returns 0 on success. If there's a failure, return either:
3338 * SCSI_MLQUEUE_DEVICE_BUSY if the device queue is full, or
3339 * SCSI_MLQUEUE_HOST_BUSY if the entire host queue is full
3340 */
3341 static int
3342 _scsih_qcmd_lck(struct scsi_cmnd *scmd, void (*done)(struct scsi_cmnd *))
3343 {
3344 struct MPT2SAS_ADAPTER *ioc = shost_priv(scmd->device->host);
3345 struct MPT2SAS_DEVICE *sas_device_priv_data;
3346 struct MPT2SAS_TARGET *sas_target_priv_data;
3347 Mpi2SCSIIORequest_t *mpi_request;
3348 u32 mpi_control;
3349 u16 smid;
3350
3351 scmd->scsi_done = done;
3352 sas_device_priv_data = scmd->device->hostdata;
3353 if (!sas_device_priv_data || !sas_device_priv_data->sas_target) {
3354 scmd->result = DID_NO_CONNECT << 16;
3355 scmd->scsi_done(scmd);
3356 return 0;
3357 }
3358
3359 if (ioc->pci_error_recovery) {
3360 scmd->result = DID_NO_CONNECT << 16;
3361 scmd->scsi_done(scmd);
3362 return 0;
3363 }
3364
3365 sas_target_priv_data = sas_device_priv_data->sas_target;
3366 /* invalid device handle */
3367 if (sas_target_priv_data->handle == MPT2SAS_INVALID_DEVICE_HANDLE) {
3368 scmd->result = DID_NO_CONNECT << 16;
3369 scmd->scsi_done(scmd);
3370 return 0;
3371 }
3372
3373 /* host recovery or link resets sent via IOCTLs */
3374 if (ioc->shost_recovery || ioc->ioc_link_reset_in_progress)
3375 return SCSI_MLQUEUE_HOST_BUSY;
3376 /* device busy with task management */
3377 else if (sas_device_priv_data->block || sas_target_priv_data->tm_busy)
3378 return SCSI_MLQUEUE_DEVICE_BUSY;
3379 /* device has been deleted */
3380 else if (sas_target_priv_data->deleted) {
3381 scmd->result = DID_NO_CONNECT << 16;
3382 scmd->scsi_done(scmd);
3383 return 0;
3384 }
3385
3386 if (scmd->sc_data_direction == DMA_FROM_DEVICE)
3387 mpi_control = MPI2_SCSIIO_CONTROL_READ;
3388 else if (scmd->sc_data_direction == DMA_TO_DEVICE)
3389 mpi_control = MPI2_SCSIIO_CONTROL_WRITE;
3390 else
3391 mpi_control = MPI2_SCSIIO_CONTROL_NODATATRANSFER;
3392
3393 /* set tags */
3394 if (!(sas_device_priv_data->flags & MPT_DEVICE_FLAGS_INIT)) {
3395 if (scmd->device->tagged_supported) {
3396 if (scmd->device->ordered_tags)
3397 mpi_control |= MPI2_SCSIIO_CONTROL_ORDEREDQ;
3398 else
3399 mpi_control |= MPI2_SCSIIO_CONTROL_SIMPLEQ;
3400 } else
3401 /* MPI Revision I (UNIT = 0xA) - removed MPI2_SCSIIO_CONTROL_UNTAGGED */
3402 /* mpi_control |= MPI2_SCSIIO_CONTROL_UNTAGGED;
3403 */
3404 mpi_control |= (0x500);
3405
3406 } else
3407 mpi_control |= MPI2_SCSIIO_CONTROL_SIMPLEQ;
3408 /* Make sure Device is not raid volume */
3409 if (!_scsih_is_raid(&scmd->device->sdev_gendev) &&
3410 sas_is_tlr_enabled(scmd->device) && scmd->cmd_len != 32)
3411 mpi_control |= MPI2_SCSIIO_CONTROL_TLR_ON;
3412
3413 smid = mpt2sas_base_get_smid_scsiio(ioc, ioc->scsi_io_cb_idx, scmd);
3414 if (!smid) {
3415 printk(MPT2SAS_ERR_FMT "%s: failed obtaining a smid\n",
3416 ioc->name, __func__);
3417 goto out;
3418 }
3419 mpi_request = mpt2sas_base_get_msg_frame(ioc, smid);
3420 memset(mpi_request, 0, sizeof(Mpi2SCSIIORequest_t));
3421 _scsih_setup_eedp(scmd, mpi_request);
3422 if (scmd->cmd_len == 32)
3423 mpi_control |= 4 << MPI2_SCSIIO_CONTROL_ADDCDBLEN_SHIFT;
3424 mpi_request->Function = MPI2_FUNCTION_SCSI_IO_REQUEST;
3425 if (sas_device_priv_data->sas_target->flags &
3426 MPT_TARGET_FLAGS_RAID_COMPONENT)
3427 mpi_request->Function = MPI2_FUNCTION_RAID_SCSI_IO_PASSTHROUGH;
3428 else
3429 mpi_request->Function = MPI2_FUNCTION_SCSI_IO_REQUEST;
3430 mpi_request->DevHandle =
3431 cpu_to_le16(sas_device_priv_data->sas_target->handle);
3432 mpi_request->DataLength = cpu_to_le32(scsi_bufflen(scmd));
3433 mpi_request->Control = cpu_to_le32(mpi_control);
3434 mpi_request->IoFlags = cpu_to_le16(scmd->cmd_len);
3435 mpi_request->MsgFlags = MPI2_SCSIIO_MSGFLAGS_SYSTEM_SENSE_ADDR;
3436 mpi_request->SenseBufferLength = SCSI_SENSE_BUFFERSIZE;
3437 mpi_request->SenseBufferLowAddress =
3438 mpt2sas_base_get_sense_buffer_dma(ioc, smid);
3439 mpi_request->SGLOffset0 = offsetof(Mpi2SCSIIORequest_t, SGL) / 4;
3440 mpi_request->SGLFlags = cpu_to_le16(MPI2_SCSIIO_SGLFLAGS_TYPE_MPI +
3441 MPI2_SCSIIO_SGLFLAGS_SYSTEM_ADDR);
3442 mpi_request->VF_ID = 0; /* TODO */
3443 mpi_request->VP_ID = 0;
3444 int_to_scsilun(sas_device_priv_data->lun, (struct scsi_lun *)
3445 mpi_request->LUN);
3446 memcpy(mpi_request->CDB.CDB32, scmd->cmnd, scmd->cmd_len);
3447
3448 if (!mpi_request->DataLength) {
3449 mpt2sas_base_build_zero_len_sge(ioc, &mpi_request->SGL);
3450 } else {
3451 if (_scsih_build_scatter_gather(ioc, scmd, smid)) {
3452 mpt2sas_base_free_smid(ioc, smid);
3453 goto out;
3454 }
3455 }
3456
3457 if (likely(mpi_request->Function == MPI2_FUNCTION_SCSI_IO_REQUEST))
3458 mpt2sas_base_put_smid_scsi_io(ioc, smid,
3459 sas_device_priv_data->sas_target->handle);
3460 else
3461 mpt2sas_base_put_smid_default(ioc, smid);
3462 return 0;
3463
3464 out:
3465 return SCSI_MLQUEUE_HOST_BUSY;
3466 }
3467
3468 static DEF_SCSI_QCMD(_scsih_qcmd)
3469
3470 /**
3471 * _scsih_normalize_sense - normalize descriptor and fixed format sense data
3472 * @sense_buffer: sense data returned by target
3473 * @data: normalized skey/asc/ascq
3474 *
3475 * Return nothing.
3476 */
3477 static void
3478 _scsih_normalize_sense(char *sense_buffer, struct sense_info *data)
3479 {
3480 if ((sense_buffer[0] & 0x7F) >= 0x72) {
3481 /* descriptor format */
3482 data->skey = sense_buffer[1] & 0x0F;
3483 data->asc = sense_buffer[2];
3484 data->ascq = sense_buffer[3];
3485 } else {
3486 /* fixed format */
3487 data->skey = sense_buffer[2] & 0x0F;
3488 data->asc = sense_buffer[12];
3489 data->ascq = sense_buffer[13];
3490 }
3491 }
3492
3493 #ifdef CONFIG_SCSI_MPT2SAS_LOGGING
3494 /**
3495 * _scsih_scsi_ioc_info - translated non-successfull SCSI_IO request
3496 * @ioc: per adapter object
3497 * @scmd: pointer to scsi command object
3498 * @mpi_reply: reply mf payload returned from firmware
3499 *
3500 * scsi_status - SCSI Status code returned from target device
3501 * scsi_state - state info associated with SCSI_IO determined by ioc
3502 * ioc_status - ioc supplied status info
3503 *
3504 * Return nothing.
3505 */
3506 static void
3507 _scsih_scsi_ioc_info(struct MPT2SAS_ADAPTER *ioc, struct scsi_cmnd *scmd,
3508 Mpi2SCSIIOReply_t *mpi_reply, u16 smid)
3509 {
3510 u32 response_info;
3511 u8 *response_bytes;
3512 u16 ioc_status = le16_to_cpu(mpi_reply->IOCStatus) &
3513 MPI2_IOCSTATUS_MASK;
3514 u8 scsi_state = mpi_reply->SCSIState;
3515 u8 scsi_status = mpi_reply->SCSIStatus;
3516 char *desc_ioc_state = NULL;
3517 char *desc_scsi_status = NULL;
3518 char *desc_scsi_state = ioc->tmp_string;
3519 u32 log_info = le32_to_cpu(mpi_reply->IOCLogInfo);
3520 struct _sas_device *sas_device = NULL;
3521 unsigned long flags;
3522 struct scsi_target *starget = scmd->device->sdev_target;
3523 struct MPT2SAS_TARGET *priv_target = starget->hostdata;
3524
3525 if (!priv_target)
3526 return;
3527
3528 if (log_info == 0x31170000)
3529 return;
3530
3531 switch (ioc_status) {
3532 case MPI2_IOCSTATUS_SUCCESS:
3533 desc_ioc_state = "success";
3534 break;
3535 case MPI2_IOCSTATUS_INVALID_FUNCTION:
3536 desc_ioc_state = "invalid function";
3537 break;
3538 case MPI2_IOCSTATUS_SCSI_RECOVERED_ERROR:
3539 desc_ioc_state = "scsi recovered error";
3540 break;
3541 case MPI2_IOCSTATUS_SCSI_INVALID_DEVHANDLE:
3542 desc_ioc_state = "scsi invalid dev handle";
3543 break;
3544 case MPI2_IOCSTATUS_SCSI_DEVICE_NOT_THERE:
3545 desc_ioc_state = "scsi device not there";
3546 break;
3547 case MPI2_IOCSTATUS_SCSI_DATA_OVERRUN:
3548 desc_ioc_state = "scsi data overrun";
3549 break;
3550 case MPI2_IOCSTATUS_SCSI_DATA_UNDERRUN:
3551 desc_ioc_state = "scsi data underrun";
3552 break;
3553 case MPI2_IOCSTATUS_SCSI_IO_DATA_ERROR:
3554 desc_ioc_state = "scsi io data error";
3555 break;
3556 case MPI2_IOCSTATUS_SCSI_PROTOCOL_ERROR:
3557 desc_ioc_state = "scsi protocol error";
3558 break;
3559 case MPI2_IOCSTATUS_SCSI_TASK_TERMINATED:
3560 desc_ioc_state = "scsi task terminated";
3561 break;
3562 case MPI2_IOCSTATUS_SCSI_RESIDUAL_MISMATCH:
3563 desc_ioc_state = "scsi residual mismatch";
3564 break;
3565 case MPI2_IOCSTATUS_SCSI_TASK_MGMT_FAILED:
3566 desc_ioc_state = "scsi task mgmt failed";
3567 break;
3568 case MPI2_IOCSTATUS_SCSI_IOC_TERMINATED:
3569 desc_ioc_state = "scsi ioc terminated";
3570 break;
3571 case MPI2_IOCSTATUS_SCSI_EXT_TERMINATED:
3572 desc_ioc_state = "scsi ext terminated";
3573 break;
3574 case MPI2_IOCSTATUS_EEDP_GUARD_ERROR:
3575 desc_ioc_state = "eedp guard error";
3576 break;
3577 case MPI2_IOCSTATUS_EEDP_REF_TAG_ERROR:
3578 desc_ioc_state = "eedp ref tag error";
3579 break;
3580 case MPI2_IOCSTATUS_EEDP_APP_TAG_ERROR:
3581 desc_ioc_state = "eedp app tag error";
3582 break;
3583 default:
3584 desc_ioc_state = "unknown";
3585 break;
3586 }
3587
3588 switch (scsi_status) {
3589 case MPI2_SCSI_STATUS_GOOD:
3590 desc_scsi_status = "good";
3591 break;
3592 case MPI2_SCSI_STATUS_CHECK_CONDITION:
3593 desc_scsi_status = "check condition";
3594 break;
3595 case MPI2_SCSI_STATUS_CONDITION_MET:
3596 desc_scsi_status = "condition met";
3597 break;
3598 case MPI2_SCSI_STATUS_BUSY:
3599 desc_scsi_status = "busy";
3600 break;
3601 case MPI2_SCSI_STATUS_INTERMEDIATE:
3602 desc_scsi_status = "intermediate";
3603 break;
3604 case MPI2_SCSI_STATUS_INTERMEDIATE_CONDMET:
3605 desc_scsi_status = "intermediate condmet";
3606 break;
3607 case MPI2_SCSI_STATUS_RESERVATION_CONFLICT:
3608 desc_scsi_status = "reservation conflict";
3609 break;
3610 case MPI2_SCSI_STATUS_COMMAND_TERMINATED:
3611 desc_scsi_status = "command terminated";
3612 break;
3613 case MPI2_SCSI_STATUS_TASK_SET_FULL:
3614 desc_scsi_status = "task set full";
3615 break;
3616 case MPI2_SCSI_STATUS_ACA_ACTIVE:
3617 desc_scsi_status = "aca active";
3618 break;
3619 case MPI2_SCSI_STATUS_TASK_ABORTED:
3620 desc_scsi_status = "task aborted";
3621 break;
3622 default:
3623 desc_scsi_status = "unknown";
3624 break;
3625 }
3626
3627 desc_scsi_state[0] = '\0';
3628 if (!scsi_state)
3629 desc_scsi_state = " ";
3630 if (scsi_state & MPI2_SCSI_STATE_RESPONSE_INFO_VALID)
3631 strcat(desc_scsi_state, "response info ");
3632 if (scsi_state & MPI2_SCSI_STATE_TERMINATED)
3633 strcat(desc_scsi_state, "state terminated ");
3634 if (scsi_state & MPI2_SCSI_STATE_NO_SCSI_STATUS)
3635 strcat(desc_scsi_state, "no status ");
3636 if (scsi_state & MPI2_SCSI_STATE_AUTOSENSE_FAILED)
3637 strcat(desc_scsi_state, "autosense failed ");
3638 if (scsi_state & MPI2_SCSI_STATE_AUTOSENSE_VALID)
3639 strcat(desc_scsi_state, "autosense valid ");
3640
3641 scsi_print_command(scmd);
3642
3643 if (priv_target->flags & MPT_TARGET_FLAGS_VOLUME) {
3644 printk(MPT2SAS_WARN_FMT "\tvolume wwid(0x%016llx)\n", ioc->name,
3645 (unsigned long long)priv_target->sas_address);
3646 } else {
3647 spin_lock_irqsave(&ioc->sas_device_lock, flags);
3648 sas_device = mpt2sas_scsih_sas_device_find_by_sas_address(ioc,
3649 priv_target->sas_address);
3650 if (sas_device) {
3651 printk(MPT2SAS_WARN_FMT "\tsas_address(0x%016llx), "
3652 "phy(%d)\n", ioc->name, sas_device->sas_address,
3653 sas_device->phy);
3654 printk(MPT2SAS_WARN_FMT
3655 "\tenclosure_logical_id(0x%016llx), slot(%d)\n",
3656 ioc->name, sas_device->enclosure_logical_id,
3657 sas_device->slot);
3658 }
3659 spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
3660 }
3661
3662 printk(MPT2SAS_WARN_FMT "\thandle(0x%04x), ioc_status(%s)(0x%04x), "
3663 "smid(%d)\n", ioc->name, le16_to_cpu(mpi_reply->DevHandle),
3664 desc_ioc_state, ioc_status, smid);
3665 printk(MPT2SAS_WARN_FMT "\trequest_len(%d), underflow(%d), "
3666 "resid(%d)\n", ioc->name, scsi_bufflen(scmd), scmd->underflow,
3667 scsi_get_resid(scmd));
3668 printk(MPT2SAS_WARN_FMT "\ttag(%d), transfer_count(%d), "
3669 "sc->result(0x%08x)\n", ioc->name, le16_to_cpu(mpi_reply->TaskTag),
3670 le32_to_cpu(mpi_reply->TransferCount), scmd->result);
3671 printk(MPT2SAS_WARN_FMT "\tscsi_status(%s)(0x%02x), "
3672 "scsi_state(%s)(0x%02x)\n", ioc->name, desc_scsi_status,
3673 scsi_status, desc_scsi_state, scsi_state);
3674
3675 if (scsi_state & MPI2_SCSI_STATE_AUTOSENSE_VALID) {
3676 struct sense_info data;
3677 _scsih_normalize_sense(scmd->sense_buffer, &data);
3678 printk(MPT2SAS_WARN_FMT "\t[sense_key,asc,ascq]: "
3679 "[0x%02x,0x%02x,0x%02x], count(%d)\n", ioc->name, data.skey,
3680 data.asc, data.ascq, le32_to_cpu(mpi_reply->SenseCount));
3681 }
3682
3683 if (scsi_state & MPI2_SCSI_STATE_RESPONSE_INFO_VALID) {
3684 response_info = le32_to_cpu(mpi_reply->ResponseInfo);
3685 response_bytes = (u8 *)&response_info;
3686 _scsih_response_code(ioc, response_bytes[0]);
3687 }
3688 }
3689 #endif
3690
3691 /**
3692 * _scsih_smart_predicted_fault - illuminate Fault LED
3693 * @ioc: per adapter object
3694 * @handle: device handle
3695 *
3696 * Return nothing.
3697 */
3698 static void
3699 _scsih_smart_predicted_fault(struct MPT2SAS_ADAPTER *ioc, u16 handle)
3700 {
3701 Mpi2SepReply_t mpi_reply;
3702 Mpi2SepRequest_t mpi_request;
3703 struct scsi_target *starget;
3704 struct MPT2SAS_TARGET *sas_target_priv_data;
3705 Mpi2EventNotificationReply_t *event_reply;
3706 Mpi2EventDataSasDeviceStatusChange_t *event_data;
3707 struct _sas_device *sas_device;
3708 ssize_t sz;
3709 unsigned long flags;
3710
3711 /* only handle non-raid devices */
3712 spin_lock_irqsave(&ioc->sas_device_lock, flags);
3713 sas_device = _scsih_sas_device_find_by_handle(ioc, handle);
3714 if (!sas_device) {
3715 spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
3716 return;
3717 }
3718 starget = sas_device->starget;
3719 sas_target_priv_data = starget->hostdata;
3720
3721 if ((sas_target_priv_data->flags & MPT_TARGET_FLAGS_RAID_COMPONENT) ||
3722 ((sas_target_priv_data->flags & MPT_TARGET_FLAGS_VOLUME))) {
3723 spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
3724 return;
3725 }
3726 starget_printk(KERN_WARNING, starget, "predicted fault\n");
3727 spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
3728
3729 if (ioc->pdev->subsystem_vendor == PCI_VENDOR_ID_IBM) {
3730 memset(&mpi_request, 0, sizeof(Mpi2SepRequest_t));
3731 mpi_request.Function = MPI2_FUNCTION_SCSI_ENCLOSURE_PROCESSOR;
3732 mpi_request.Action = MPI2_SEP_REQ_ACTION_WRITE_STATUS;
3733 mpi_request.SlotStatus =
3734 cpu_to_le32(MPI2_SEP_REQ_SLOTSTATUS_PREDICTED_FAULT);
3735 mpi_request.DevHandle = cpu_to_le16(handle);
3736 mpi_request.Flags = MPI2_SEP_REQ_FLAGS_DEVHANDLE_ADDRESS;
3737 if ((mpt2sas_base_scsi_enclosure_processor(ioc, &mpi_reply,
3738 &mpi_request)) != 0) {
3739 printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
3740 ioc->name, __FILE__, __LINE__, __func__);
3741 return;
3742 }
3743
3744 if (mpi_reply.IOCStatus || mpi_reply.IOCLogInfo) {
3745 dewtprintk(ioc, printk(MPT2SAS_INFO_FMT
3746 "enclosure_processor: ioc_status (0x%04x), "
3747 "loginfo(0x%08x)\n", ioc->name,
3748 le16_to_cpu(mpi_reply.IOCStatus),
3749 le32_to_cpu(mpi_reply.IOCLogInfo)));
3750 return;
3751 }
3752 }
3753
3754 /* insert into event log */
3755 sz = offsetof(Mpi2EventNotificationReply_t, EventData) +
3756 sizeof(Mpi2EventDataSasDeviceStatusChange_t);
3757 event_reply = kzalloc(sz, GFP_KERNEL);
3758 if (!event_reply) {
3759 printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
3760 ioc->name, __FILE__, __LINE__, __func__);
3761 return;
3762 }
3763
3764 event_reply->Function = MPI2_FUNCTION_EVENT_NOTIFICATION;
3765 event_reply->Event =
3766 cpu_to_le16(MPI2_EVENT_SAS_DEVICE_STATUS_CHANGE);
3767 event_reply->MsgLength = sz/4;
3768 event_reply->EventDataLength =
3769 cpu_to_le16(sizeof(Mpi2EventDataSasDeviceStatusChange_t)/4);
3770 event_data = (Mpi2EventDataSasDeviceStatusChange_t *)
3771 event_reply->EventData;
3772 event_data->ReasonCode = MPI2_EVENT_SAS_DEV_STAT_RC_SMART_DATA;
3773 event_data->ASC = 0x5D;
3774 event_data->DevHandle = cpu_to_le16(handle);
3775 event_data->SASAddress = cpu_to_le64(sas_target_priv_data->sas_address);
3776 mpt2sas_ctl_add_to_event_log(ioc, event_reply);
3777 kfree(event_reply);
3778 }
3779
3780 /**
3781 * _scsih_io_done - scsi request callback
3782 * @ioc: per adapter object
3783 * @smid: system request message index
3784 * @msix_index: MSIX table index supplied by the OS
3785 * @reply: reply message frame(lower 32bit addr)
3786 *
3787 * Callback handler when using _scsih_qcmd.
3788 *
3789 * Return 1 meaning mf should be freed from _base_interrupt
3790 * 0 means the mf is freed from this function.
3791 */
3792 static u8
3793 _scsih_io_done(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 msix_index, u32 reply)
3794 {
3795 Mpi2SCSIIORequest_t *mpi_request;
3796 Mpi2SCSIIOReply_t *mpi_reply;
3797 struct scsi_cmnd *scmd;
3798 u16 ioc_status;
3799 u32 xfer_cnt;
3800 u8 scsi_state;
3801 u8 scsi_status;
3802 u32 log_info;
3803 struct MPT2SAS_DEVICE *sas_device_priv_data;
3804 u32 response_code = 0;
3805
3806 mpi_reply = mpt2sas_base_get_reply_virt_addr(ioc, reply);
3807 scmd = _scsih_scsi_lookup_get(ioc, smid);
3808 if (scmd == NULL)
3809 return 1;
3810
3811 mpi_request = mpt2sas_base_get_msg_frame(ioc, smid);
3812
3813 if (mpi_reply == NULL) {
3814 scmd->result = DID_OK << 16;
3815 goto out;
3816 }
3817
3818 sas_device_priv_data = scmd->device->hostdata;
3819 if (!sas_device_priv_data || !sas_device_priv_data->sas_target ||
3820 sas_device_priv_data->sas_target->deleted) {
3821 scmd->result = DID_NO_CONNECT << 16;
3822 goto out;
3823 }
3824
3825 /* turning off TLR */
3826 scsi_state = mpi_reply->SCSIState;
3827 if (scsi_state & MPI2_SCSI_STATE_RESPONSE_INFO_VALID)
3828 response_code =
3829 le32_to_cpu(mpi_reply->ResponseInfo) & 0xFF;
3830 if (!sas_device_priv_data->tlr_snoop_check) {
3831 sas_device_priv_data->tlr_snoop_check++;
3832 if (!_scsih_is_raid(&scmd->device->sdev_gendev) &&
3833 sas_is_tlr_enabled(scmd->device) &&
3834 response_code == MPI2_SCSITASKMGMT_RSP_INVALID_FRAME) {
3835 sas_disable_tlr(scmd->device);
3836 sdev_printk(KERN_INFO, scmd->device, "TLR disabled\n");
3837 }
3838 }
3839
3840 xfer_cnt = le32_to_cpu(mpi_reply->TransferCount);
3841 scsi_set_resid(scmd, scsi_bufflen(scmd) - xfer_cnt);
3842 ioc_status = le16_to_cpu(mpi_reply->IOCStatus);
3843 if (ioc_status & MPI2_IOCSTATUS_FLAG_LOG_INFO_AVAILABLE)
3844 log_info = le32_to_cpu(mpi_reply->IOCLogInfo);
3845 else
3846 log_info = 0;
3847 ioc_status &= MPI2_IOCSTATUS_MASK;
3848 scsi_status = mpi_reply->SCSIStatus;
3849
3850 if (ioc_status == MPI2_IOCSTATUS_SCSI_DATA_UNDERRUN && xfer_cnt == 0 &&
3851 (scsi_status == MPI2_SCSI_STATUS_BUSY ||
3852 scsi_status == MPI2_SCSI_STATUS_RESERVATION_CONFLICT ||
3853 scsi_status == MPI2_SCSI_STATUS_TASK_SET_FULL)) {
3854 ioc_status = MPI2_IOCSTATUS_SUCCESS;
3855 }
3856
3857 if (scsi_state & MPI2_SCSI_STATE_AUTOSENSE_VALID) {
3858 struct sense_info data;
3859 const void *sense_data = mpt2sas_base_get_sense_buffer(ioc,
3860 smid);
3861 u32 sz = min_t(u32, SCSI_SENSE_BUFFERSIZE,
3862 le32_to_cpu(mpi_reply->SenseCount));
3863 memcpy(scmd->sense_buffer, sense_data, sz);
3864 _scsih_normalize_sense(scmd->sense_buffer, &data);
3865 /* failure prediction threshold exceeded */
3866 if (data.asc == 0x5D)
3867 _scsih_smart_predicted_fault(ioc,
3868 le16_to_cpu(mpi_reply->DevHandle));
3869 }
3870
3871 switch (ioc_status) {
3872 case MPI2_IOCSTATUS_BUSY:
3873 case MPI2_IOCSTATUS_INSUFFICIENT_RESOURCES:
3874 scmd->result = SAM_STAT_BUSY;
3875 break;
3876
3877 case MPI2_IOCSTATUS_SCSI_DEVICE_NOT_THERE:
3878 scmd->result = DID_NO_CONNECT << 16;
3879 break;
3880
3881 case MPI2_IOCSTATUS_SCSI_IOC_TERMINATED:
3882 if (sas_device_priv_data->block) {
3883 scmd->result = DID_TRANSPORT_DISRUPTED << 16;
3884 goto out;
3885 }
3886 case MPI2_IOCSTATUS_SCSI_TASK_TERMINATED:
3887 case MPI2_IOCSTATUS_SCSI_EXT_TERMINATED:
3888 scmd->result = DID_RESET << 16;
3889 break;
3890
3891 case MPI2_IOCSTATUS_SCSI_RESIDUAL_MISMATCH:
3892 if ((xfer_cnt == 0) || (scmd->underflow > xfer_cnt))
3893 scmd->result = DID_SOFT_ERROR << 16;
3894 else
3895 scmd->result = (DID_OK << 16) | scsi_status;
3896 break;
3897
3898 case MPI2_IOCSTATUS_SCSI_DATA_UNDERRUN:
3899 scmd->result = (DID_OK << 16) | scsi_status;
3900
3901 if ((scsi_state & MPI2_SCSI_STATE_AUTOSENSE_VALID))
3902 break;
3903
3904 if (xfer_cnt < scmd->underflow) {
3905 if (scsi_status == SAM_STAT_BUSY)
3906 scmd->result = SAM_STAT_BUSY;
3907 else
3908 scmd->result = DID_SOFT_ERROR << 16;
3909 } else if (scsi_state & (MPI2_SCSI_STATE_AUTOSENSE_FAILED |
3910 MPI2_SCSI_STATE_NO_SCSI_STATUS))
3911 scmd->result = DID_SOFT_ERROR << 16;
3912 else if (scsi_state & MPI2_SCSI_STATE_TERMINATED)
3913 scmd->result = DID_RESET << 16;
3914 else if (!xfer_cnt && scmd->cmnd[0] == REPORT_LUNS) {
3915 mpi_reply->SCSIState = MPI2_SCSI_STATE_AUTOSENSE_VALID;
3916 mpi_reply->SCSIStatus = SAM_STAT_CHECK_CONDITION;
3917 scmd->result = (DRIVER_SENSE << 24) |
3918 SAM_STAT_CHECK_CONDITION;
3919 scmd->sense_buffer[0] = 0x70;
3920 scmd->sense_buffer[2] = ILLEGAL_REQUEST;
3921 scmd->sense_buffer[12] = 0x20;
3922 scmd->sense_buffer[13] = 0;
3923 }
3924 break;
3925
3926 case MPI2_IOCSTATUS_SCSI_DATA_OVERRUN:
3927 scsi_set_resid(scmd, 0);
3928 case MPI2_IOCSTATUS_SCSI_RECOVERED_ERROR:
3929 case MPI2_IOCSTATUS_SUCCESS:
3930 scmd->result = (DID_OK << 16) | scsi_status;
3931 if (response_code ==
3932 MPI2_SCSITASKMGMT_RSP_INVALID_FRAME ||
3933 (scsi_state & (MPI2_SCSI_STATE_AUTOSENSE_FAILED |
3934 MPI2_SCSI_STATE_NO_SCSI_STATUS)))
3935 scmd->result = DID_SOFT_ERROR << 16;
3936 else if (scsi_state & MPI2_SCSI_STATE_TERMINATED)
3937 scmd->result = DID_RESET << 16;
3938 break;
3939
3940 case MPI2_IOCSTATUS_EEDP_GUARD_ERROR:
3941 case MPI2_IOCSTATUS_EEDP_REF_TAG_ERROR:
3942 case MPI2_IOCSTATUS_EEDP_APP_TAG_ERROR:
3943 _scsih_eedp_error_handling(scmd, ioc_status);
3944 break;
3945 case MPI2_IOCSTATUS_SCSI_PROTOCOL_ERROR:
3946 case MPI2_IOCSTATUS_INVALID_FUNCTION:
3947 case MPI2_IOCSTATUS_INVALID_SGL:
3948 case MPI2_IOCSTATUS_INTERNAL_ERROR:
3949 case MPI2_IOCSTATUS_INVALID_FIELD:
3950 case MPI2_IOCSTATUS_INVALID_STATE:
3951 case MPI2_IOCSTATUS_SCSI_IO_DATA_ERROR:
3952 case MPI2_IOCSTATUS_SCSI_TASK_MGMT_FAILED:
3953 default:
3954 scmd->result = DID_SOFT_ERROR << 16;
3955 break;
3956
3957 }
3958
3959 #ifdef CONFIG_SCSI_MPT2SAS_LOGGING
3960 if (scmd->result && (ioc->logging_level & MPT_DEBUG_REPLY))
3961 _scsih_scsi_ioc_info(ioc , scmd, mpi_reply, smid);
3962 #endif
3963
3964 out:
3965 scsi_dma_unmap(scmd);
3966 scmd->scsi_done(scmd);
3967 return 1;
3968 }
3969
3970 /**
3971 * _scsih_sas_host_refresh - refreshing sas host object contents
3972 * @ioc: per adapter object
3973 * Context: user
3974 *
3975 * During port enable, fw will send topology events for every device. Its
3976 * possible that the handles may change from the previous setting, so this
3977 * code keeping handles updating if changed.
3978 *
3979 * Return nothing.
3980 */
3981 static void
3982 _scsih_sas_host_refresh(struct MPT2SAS_ADAPTER *ioc)
3983 {
3984 u16 sz;
3985 u16 ioc_status;
3986 int i;
3987 Mpi2ConfigReply_t mpi_reply;
3988 Mpi2SasIOUnitPage0_t *sas_iounit_pg0 = NULL;
3989 u16 attached_handle;
3990 u8 link_rate;
3991
3992 dtmprintk(ioc, printk(MPT2SAS_INFO_FMT
3993 "updating handles for sas_host(0x%016llx)\n",
3994 ioc->name, (unsigned long long)ioc->sas_hba.sas_address));
3995
3996 sz = offsetof(Mpi2SasIOUnitPage0_t, PhyData) + (ioc->sas_hba.num_phys
3997 * sizeof(Mpi2SasIOUnit0PhyData_t));
3998 sas_iounit_pg0 = kzalloc(sz, GFP_KERNEL);
3999 if (!sas_iounit_pg0) {
4000 printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
4001 ioc->name, __FILE__, __LINE__, __func__);
4002 return;
4003 }
4004
4005 if ((mpt2sas_config_get_sas_iounit_pg0(ioc, &mpi_reply,
4006 sas_iounit_pg0, sz)) != 0)
4007 goto out;
4008 ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & MPI2_IOCSTATUS_MASK;
4009 if (ioc_status != MPI2_IOCSTATUS_SUCCESS)
4010 goto out;
4011 for (i = 0; i < ioc->sas_hba.num_phys ; i++) {
4012 link_rate = sas_iounit_pg0->PhyData[i].NegotiatedLinkRate >> 4;
4013 if (i == 0)
4014 ioc->sas_hba.handle = le16_to_cpu(sas_iounit_pg0->
4015 PhyData[0].ControllerDevHandle);
4016 ioc->sas_hba.phy[i].handle = ioc->sas_hba.handle;
4017 attached_handle = le16_to_cpu(sas_iounit_pg0->PhyData[i].
4018 AttachedDevHandle);
4019 if (attached_handle && link_rate < MPI2_SAS_NEG_LINK_RATE_1_5)
4020 link_rate = MPI2_SAS_NEG_LINK_RATE_1_5;
4021 mpt2sas_transport_update_links(ioc, ioc->sas_hba.sas_address,
4022 attached_handle, i, link_rate);
4023 }
4024 out:
4025 kfree(sas_iounit_pg0);
4026 }
4027
4028 /**
4029 * _scsih_sas_host_add - create sas host object
4030 * @ioc: per adapter object
4031 *
4032 * Creating host side data object, stored in ioc->sas_hba
4033 *
4034 * Return nothing.
4035 */
4036 static void
4037 _scsih_sas_host_add(struct MPT2SAS_ADAPTER *ioc)
4038 {
4039 int i;
4040 Mpi2ConfigReply_t mpi_reply;
4041 Mpi2SasIOUnitPage0_t *sas_iounit_pg0 = NULL;
4042 Mpi2SasIOUnitPage1_t *sas_iounit_pg1 = NULL;
4043 Mpi2SasPhyPage0_t phy_pg0;
4044 Mpi2SasDevicePage0_t sas_device_pg0;
4045 Mpi2SasEnclosurePage0_t enclosure_pg0;
4046 u16 ioc_status;
4047 u16 sz;
4048 u16 device_missing_delay;
4049
4050 mpt2sas_config_get_number_hba_phys(ioc, &ioc->sas_hba.num_phys);
4051 if (!ioc->sas_hba.num_phys) {
4052 printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
4053 ioc->name, __FILE__, __LINE__, __func__);
4054 return;
4055 }
4056
4057 /* sas_iounit page 0 */
4058 sz = offsetof(Mpi2SasIOUnitPage0_t, PhyData) + (ioc->sas_hba.num_phys *
4059 sizeof(Mpi2SasIOUnit0PhyData_t));
4060 sas_iounit_pg0 = kzalloc(sz, GFP_KERNEL);
4061 if (!sas_iounit_pg0) {
4062 printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
4063 ioc->name, __FILE__, __LINE__, __func__);
4064 return;
4065 }
4066 if ((mpt2sas_config_get_sas_iounit_pg0(ioc, &mpi_reply,
4067 sas_iounit_pg0, sz))) {
4068 printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
4069 ioc->name, __FILE__, __LINE__, __func__);
4070 goto out;
4071 }
4072 ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
4073 MPI2_IOCSTATUS_MASK;
4074 if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
4075 printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
4076 ioc->name, __FILE__, __LINE__, __func__);
4077 goto out;
4078 }
4079
4080 /* sas_iounit page 1 */
4081 sz = offsetof(Mpi2SasIOUnitPage1_t, PhyData) + (ioc->sas_hba.num_phys *
4082 sizeof(Mpi2SasIOUnit1PhyData_t));
4083 sas_iounit_pg1 = kzalloc(sz, GFP_KERNEL);
4084 if (!sas_iounit_pg1) {
4085 printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
4086 ioc->name, __FILE__, __LINE__, __func__);
4087 goto out;
4088 }
4089 if ((mpt2sas_config_get_sas_iounit_pg1(ioc, &mpi_reply,
4090 sas_iounit_pg1, sz))) {
4091 printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
4092 ioc->name, __FILE__, __LINE__, __func__);
4093 goto out;
4094 }
4095 ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
4096 MPI2_IOCSTATUS_MASK;
4097 if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
4098 printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
4099 ioc->name, __FILE__, __LINE__, __func__);
4100 goto out;
4101 }
4102
4103 ioc->io_missing_delay =
4104 le16_to_cpu(sas_iounit_pg1->IODeviceMissingDelay);
4105 device_missing_delay =
4106 le16_to_cpu(sas_iounit_pg1->ReportDeviceMissingDelay);
4107 if (device_missing_delay & MPI2_SASIOUNIT1_REPORT_MISSING_UNIT_16)
4108 ioc->device_missing_delay = (device_missing_delay &
4109 MPI2_SASIOUNIT1_REPORT_MISSING_TIMEOUT_MASK) * 16;
4110 else
4111 ioc->device_missing_delay = device_missing_delay &
4112 MPI2_SASIOUNIT1_REPORT_MISSING_TIMEOUT_MASK;
4113
4114 ioc->sas_hba.parent_dev = &ioc->shost->shost_gendev;
4115 ioc->sas_hba.phy = kcalloc(ioc->sas_hba.num_phys,
4116 sizeof(struct _sas_phy), GFP_KERNEL);
4117 if (!ioc->sas_hba.phy) {
4118 printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
4119 ioc->name, __FILE__, __LINE__, __func__);
4120 goto out;
4121 }
4122 for (i = 0; i < ioc->sas_hba.num_phys ; i++) {
4123 if ((mpt2sas_config_get_phy_pg0(ioc, &mpi_reply, &phy_pg0,
4124 i))) {
4125 printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
4126 ioc->name, __FILE__, __LINE__, __func__);
4127 goto out;
4128 }
4129 ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
4130 MPI2_IOCSTATUS_MASK;
4131 if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
4132 printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
4133 ioc->name, __FILE__, __LINE__, __func__);
4134 goto out;
4135 }
4136
4137 if (i == 0)
4138 ioc->sas_hba.handle = le16_to_cpu(sas_iounit_pg0->
4139 PhyData[0].ControllerDevHandle);
4140 ioc->sas_hba.phy[i].handle = ioc->sas_hba.handle;
4141 ioc->sas_hba.phy[i].phy_id = i;
4142 mpt2sas_transport_add_host_phy(ioc, &ioc->sas_hba.phy[i],
4143 phy_pg0, ioc->sas_hba.parent_dev);
4144 }
4145 if ((mpt2sas_config_get_sas_device_pg0(ioc, &mpi_reply, &sas_device_pg0,
4146 MPI2_SAS_DEVICE_PGAD_FORM_HANDLE, ioc->sas_hba.handle))) {
4147 printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
4148 ioc->name, __FILE__, __LINE__, __func__);
4149 goto out;
4150 }
4151 ioc->sas_hba.enclosure_handle =
4152 le16_to_cpu(sas_device_pg0.EnclosureHandle);
4153 ioc->sas_hba.sas_address = le64_to_cpu(sas_device_pg0.SASAddress);
4154 printk(MPT2SAS_INFO_FMT "host_add: handle(0x%04x), "
4155 "sas_addr(0x%016llx), phys(%d)\n", ioc->name, ioc->sas_hba.handle,
4156 (unsigned long long) ioc->sas_hba.sas_address,
4157 ioc->sas_hba.num_phys) ;
4158
4159 if (ioc->sas_hba.enclosure_handle) {
4160 if (!(mpt2sas_config_get_enclosure_pg0(ioc, &mpi_reply,
4161 &enclosure_pg0,
4162 MPI2_SAS_ENCLOS_PGAD_FORM_HANDLE,
4163 ioc->sas_hba.enclosure_handle))) {
4164 ioc->sas_hba.enclosure_logical_id =
4165 le64_to_cpu(enclosure_pg0.EnclosureLogicalID);
4166 }
4167 }
4168
4169 out:
4170 kfree(sas_iounit_pg1);
4171 kfree(sas_iounit_pg0);
4172 }
4173
4174 /**
4175 * _scsih_expander_add - creating expander object
4176 * @ioc: per adapter object
4177 * @handle: expander handle
4178 *
4179 * Creating expander object, stored in ioc->sas_expander_list.
4180 *
4181 * Return 0 for success, else error.
4182 */
4183 static int
4184 _scsih_expander_add(struct MPT2SAS_ADAPTER *ioc, u16 handle)
4185 {
4186 struct _sas_node *sas_expander;
4187 Mpi2ConfigReply_t mpi_reply;
4188 Mpi2ExpanderPage0_t expander_pg0;
4189 Mpi2ExpanderPage1_t expander_pg1;
4190 Mpi2SasEnclosurePage0_t enclosure_pg0;
4191 u32 ioc_status;
4192 u16 parent_handle;
4193 __le64 sas_address, sas_address_parent = 0;
4194 int i;
4195 unsigned long flags;
4196 struct _sas_port *mpt2sas_port = NULL;
4197 int rc = 0;
4198
4199 if (!handle)
4200 return -1;
4201
4202 if (ioc->shost_recovery || ioc->pci_error_recovery)
4203 return -1;
4204
4205 if ((mpt2sas_config_get_expander_pg0(ioc, &mpi_reply, &expander_pg0,
4206 MPI2_SAS_EXPAND_PGAD_FORM_HNDL, handle))) {
4207 printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
4208 ioc->name, __FILE__, __LINE__, __func__);
4209 return -1;
4210 }
4211
4212 ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
4213 MPI2_IOCSTATUS_MASK;
4214 if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
4215 printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
4216 ioc->name, __FILE__, __LINE__, __func__);
4217 return -1;
4218 }
4219
4220 /* handle out of order topology events */
4221 parent_handle = le16_to_cpu(expander_pg0.ParentDevHandle);
4222 if (_scsih_get_sas_address(ioc, parent_handle, &sas_address_parent)
4223 != 0) {
4224 printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
4225 ioc->name, __FILE__, __LINE__, __func__);
4226 return -1;
4227 }
4228 if (sas_address_parent != ioc->sas_hba.sas_address) {
4229 spin_lock_irqsave(&ioc->sas_node_lock, flags);
4230 sas_expander = mpt2sas_scsih_expander_find_by_sas_address(ioc,
4231 sas_address_parent);
4232 spin_unlock_irqrestore(&ioc->sas_node_lock, flags);
4233 if (!sas_expander) {
4234 rc = _scsih_expander_add(ioc, parent_handle);
4235 if (rc != 0)
4236 return rc;
4237 }
4238 }
4239
4240 spin_lock_irqsave(&ioc->sas_node_lock, flags);
4241 sas_address = le64_to_cpu(expander_pg0.SASAddress);
4242 sas_expander = mpt2sas_scsih_expander_find_by_sas_address(ioc,
4243 sas_address);
4244 spin_unlock_irqrestore(&ioc->sas_node_lock, flags);
4245
4246 if (sas_expander)
4247 return 0;
4248
4249 sas_expander = kzalloc(sizeof(struct _sas_node),
4250 GFP_KERNEL);
4251 if (!sas_expander) {
4252 printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
4253 ioc->name, __FILE__, __LINE__, __func__);
4254 return -1;
4255 }
4256
4257 sas_expander->handle = handle;
4258 sas_expander->num_phys = expander_pg0.NumPhys;
4259 sas_expander->sas_address_parent = sas_address_parent;
4260 sas_expander->sas_address = sas_address;
4261
4262 printk(MPT2SAS_INFO_FMT "expander_add: handle(0x%04x),"
4263 " parent(0x%04x), sas_addr(0x%016llx), phys(%d)\n", ioc->name,
4264 handle, parent_handle, (unsigned long long)
4265 sas_expander->sas_address, sas_expander->num_phys);
4266
4267 if (!sas_expander->num_phys)
4268 goto out_fail;
4269 sas_expander->phy = kcalloc(sas_expander->num_phys,
4270 sizeof(struct _sas_phy), GFP_KERNEL);
4271 if (!sas_expander->phy) {
4272 printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
4273 ioc->name, __FILE__, __LINE__, __func__);
4274 rc = -1;
4275 goto out_fail;
4276 }
4277
4278 INIT_LIST_HEAD(&sas_expander->sas_port_list);
4279 mpt2sas_port = mpt2sas_transport_port_add(ioc, handle,
4280 sas_address_parent);
4281 if (!mpt2sas_port) {
4282 printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
4283 ioc->name, __FILE__, __LINE__, __func__);
4284 rc = -1;
4285 goto out_fail;
4286 }
4287 sas_expander->parent_dev = &mpt2sas_port->rphy->dev;
4288
4289 for (i = 0 ; i < sas_expander->num_phys ; i++) {
4290 if ((mpt2sas_config_get_expander_pg1(ioc, &mpi_reply,
4291 &expander_pg1, i, handle))) {
4292 printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
4293 ioc->name, __FILE__, __LINE__, __func__);
4294 rc = -1;
4295 goto out_fail;
4296 }
4297 sas_expander->phy[i].handle = handle;
4298 sas_expander->phy[i].phy_id = i;
4299
4300 if ((mpt2sas_transport_add_expander_phy(ioc,
4301 &sas_expander->phy[i], expander_pg1,
4302 sas_expander->parent_dev))) {
4303 printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
4304 ioc->name, __FILE__, __LINE__, __func__);
4305 rc = -1;
4306 goto out_fail;
4307 }
4308 }
4309
4310 if (sas_expander->enclosure_handle) {
4311 if (!(mpt2sas_config_get_enclosure_pg0(ioc, &mpi_reply,
4312 &enclosure_pg0, MPI2_SAS_ENCLOS_PGAD_FORM_HANDLE,
4313 sas_expander->enclosure_handle))) {
4314 sas_expander->enclosure_logical_id =
4315 le64_to_cpu(enclosure_pg0.EnclosureLogicalID);
4316 }
4317 }
4318
4319 _scsih_expander_node_add(ioc, sas_expander);
4320 return 0;
4321
4322 out_fail:
4323
4324 if (mpt2sas_port)
4325 mpt2sas_transport_port_remove(ioc, sas_expander->sas_address,
4326 sas_address_parent);
4327 kfree(sas_expander);
4328 return rc;
4329 }
4330
4331 /**
4332 * _scsih_done - scsih callback handler.
4333 * @ioc: per adapter object
4334 * @smid: system request message index
4335 * @msix_index: MSIX table index supplied by the OS
4336 * @reply: reply message frame(lower 32bit addr)
4337 *
4338 * Callback handler when sending internal generated message frames.
4339 * The callback index passed is `ioc->scsih_cb_idx`
4340 *
4341 * Return 1 meaning mf should be freed from _base_interrupt
4342 * 0 means the mf is freed from this function.
4343 */
4344 static u8
4345 _scsih_done(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 msix_index, u32 reply)
4346 {
4347 MPI2DefaultReply_t *mpi_reply;
4348
4349 mpi_reply = mpt2sas_base_get_reply_virt_addr(ioc, reply);
4350 if (ioc->scsih_cmds.status == MPT2_CMD_NOT_USED)
4351 return 1;
4352 if (ioc->scsih_cmds.smid != smid)
4353 return 1;
4354 ioc->scsih_cmds.status |= MPT2_CMD_COMPLETE;
4355 if (mpi_reply) {
4356 memcpy(ioc->scsih_cmds.reply, mpi_reply,
4357 mpi_reply->MsgLength*4);
4358 ioc->scsih_cmds.status |= MPT2_CMD_REPLY_VALID;
4359 }
4360 ioc->scsih_cmds.status &= ~MPT2_CMD_PENDING;
4361 complete(&ioc->scsih_cmds.done);
4362 return 1;
4363 }
4364
4365 /**
4366 * mpt2sas_expander_remove - removing expander object
4367 * @ioc: per adapter object
4368 * @sas_address: expander sas_address
4369 *
4370 * Return nothing.
4371 */
4372 void
4373 mpt2sas_expander_remove(struct MPT2SAS_ADAPTER *ioc, u64 sas_address)
4374 {
4375 struct _sas_node *sas_expander;
4376 unsigned long flags;
4377
4378 if (ioc->shost_recovery)
4379 return;
4380
4381 spin_lock_irqsave(&ioc->sas_node_lock, flags);
4382 sas_expander = mpt2sas_scsih_expander_find_by_sas_address(ioc,
4383 sas_address);
4384 if (!sas_expander) {
4385 spin_unlock_irqrestore(&ioc->sas_node_lock, flags);
4386 return;
4387 }
4388 list_del(&sas_expander->list);
4389 spin_unlock_irqrestore(&ioc->sas_node_lock, flags);
4390 _scsih_expander_node_remove(ioc, sas_expander);
4391 }
4392
4393 /**
4394 * _scsih_check_access_status - check access flags
4395 * @ioc: per adapter object
4396 * @sas_address: sas address
4397 * @handle: sas device handle
4398 * @access_flags: errors returned during discovery of the device
4399 *
4400 * Return 0 for success, else failure
4401 */
4402 static u8
4403 _scsih_check_access_status(struct MPT2SAS_ADAPTER *ioc, u64 sas_address,
4404 u16 handle, u8 access_status)
4405 {
4406 u8 rc = 1;
4407 char *desc = NULL;
4408
4409 switch (access_status) {
4410 case MPI2_SAS_DEVICE0_ASTATUS_NO_ERRORS:
4411 case MPI2_SAS_DEVICE0_ASTATUS_SATA_NEEDS_INITIALIZATION:
4412 rc = 0;
4413 break;
4414 case MPI2_SAS_DEVICE0_ASTATUS_SATA_CAPABILITY_FAILED:
4415 desc = "sata capability failed";
4416 break;
4417 case MPI2_SAS_DEVICE0_ASTATUS_SATA_AFFILIATION_CONFLICT:
4418 desc = "sata affiliation conflict";
4419 break;
4420 case MPI2_SAS_DEVICE0_ASTATUS_ROUTE_NOT_ADDRESSABLE:
4421 desc = "route not addressable";
4422 break;
4423 case MPI2_SAS_DEVICE0_ASTATUS_SMP_ERROR_NOT_ADDRESSABLE:
4424 desc = "smp error not addressable";
4425 break;
4426 case MPI2_SAS_DEVICE0_ASTATUS_DEVICE_BLOCKED:
4427 desc = "device blocked";
4428 break;
4429 case MPI2_SAS_DEVICE0_ASTATUS_SATA_INIT_FAILED:
4430 case MPI2_SAS_DEVICE0_ASTATUS_SIF_UNKNOWN:
4431 case MPI2_SAS_DEVICE0_ASTATUS_SIF_AFFILIATION_CONFLICT:
4432 case MPI2_SAS_DEVICE0_ASTATUS_SIF_DIAG:
4433 case MPI2_SAS_DEVICE0_ASTATUS_SIF_IDENTIFICATION:
4434 case MPI2_SAS_DEVICE0_ASTATUS_SIF_CHECK_POWER:
4435 case MPI2_SAS_DEVICE0_ASTATUS_SIF_PIO_SN:
4436 case MPI2_SAS_DEVICE0_ASTATUS_SIF_MDMA_SN:
4437 case MPI2_SAS_DEVICE0_ASTATUS_SIF_UDMA_SN:
4438 case MPI2_SAS_DEVICE0_ASTATUS_SIF_ZONING_VIOLATION:
4439 case MPI2_SAS_DEVICE0_ASTATUS_SIF_NOT_ADDRESSABLE:
4440 case MPI2_SAS_DEVICE0_ASTATUS_SIF_MAX:
4441 desc = "sata initialization failed";
4442 break;
4443 default:
4444 desc = "unknown";
4445 break;
4446 }
4447
4448 if (!rc)
4449 return 0;
4450
4451 printk(MPT2SAS_ERR_FMT "discovery errors(%s): sas_address(0x%016llx), "
4452 "handle(0x%04x)\n", ioc->name, desc,
4453 (unsigned long long)sas_address, handle);
4454 return rc;
4455 }
4456
4457 static void
4458 _scsih_check_device(struct MPT2SAS_ADAPTER *ioc, u16 handle)
4459 {
4460 Mpi2ConfigReply_t mpi_reply;
4461 Mpi2SasDevicePage0_t sas_device_pg0;
4462 struct _sas_device *sas_device;
4463 u32 ioc_status;
4464 unsigned long flags;
4465 u64 sas_address;
4466 struct scsi_target *starget;
4467 struct MPT2SAS_TARGET *sas_target_priv_data;
4468 u32 device_info;
4469
4470 if ((mpt2sas_config_get_sas_device_pg0(ioc, &mpi_reply, &sas_device_pg0,
4471 MPI2_SAS_DEVICE_PGAD_FORM_HANDLE, handle)))
4472 return;
4473
4474 ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & MPI2_IOCSTATUS_MASK;
4475 if (ioc_status != MPI2_IOCSTATUS_SUCCESS)
4476 return;
4477
4478 /* check if this is end device */
4479 device_info = le32_to_cpu(sas_device_pg0.DeviceInfo);
4480 if (!(_scsih_is_end_device(device_info)))
4481 return;
4482
4483 spin_lock_irqsave(&ioc->sas_device_lock, flags);
4484 sas_address = le64_to_cpu(sas_device_pg0.SASAddress);
4485 sas_device = mpt2sas_scsih_sas_device_find_by_sas_address(ioc,
4486 sas_address);
4487
4488 if (!sas_device) {
4489 printk(MPT2SAS_ERR_FMT "device is not present "
4490 "handle(0x%04x), no sas_device!!!\n", ioc->name, handle);
4491 spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
4492 return;
4493 }
4494
4495 if (unlikely(sas_device->handle != handle)) {
4496 starget = sas_device->starget;
4497 sas_target_priv_data = starget->hostdata;
4498 starget_printk(KERN_INFO, starget, "handle changed from(0x%04x)"
4499 " to (0x%04x)!!!\n", sas_device->handle, handle);
4500 sas_target_priv_data->handle = handle;
4501 sas_device->handle = handle;
4502 }
4503 spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
4504
4505 /* check if device is present */
4506 if (!(le16_to_cpu(sas_device_pg0.Flags) &
4507 MPI2_SAS_DEVICE0_FLAGS_DEVICE_PRESENT)) {
4508 printk(MPT2SAS_ERR_FMT "device is not present "
4509 "handle(0x%04x), flags!!!\n", ioc->name, handle);
4510 return;
4511 }
4512
4513 /* check if there were any issues with discovery */
4514 if (_scsih_check_access_status(ioc, sas_address, handle,
4515 sas_device_pg0.AccessStatus))
4516 return;
4517 _scsih_ublock_io_device(ioc, handle);
4518
4519 }
4520
4521 /**
4522 * _scsih_add_device - creating sas device object
4523 * @ioc: per adapter object
4524 * @handle: sas device handle
4525 * @phy_num: phy number end device attached to
4526 * @is_pd: is this hidden raid component
4527 *
4528 * Creating end device object, stored in ioc->sas_device_list.
4529 *
4530 * Returns 0 for success, non-zero for failure.
4531 */
4532 static int
4533 _scsih_add_device(struct MPT2SAS_ADAPTER *ioc, u16 handle, u8 phy_num, u8 is_pd)
4534 {
4535 Mpi2ConfigReply_t mpi_reply;
4536 Mpi2SasDevicePage0_t sas_device_pg0;
4537 Mpi2SasEnclosurePage0_t enclosure_pg0;
4538 struct _sas_device *sas_device;
4539 u32 ioc_status;
4540 __le64 sas_address;
4541 u32 device_info;
4542 unsigned long flags;
4543
4544 if ((mpt2sas_config_get_sas_device_pg0(ioc, &mpi_reply, &sas_device_pg0,
4545 MPI2_SAS_DEVICE_PGAD_FORM_HANDLE, handle))) {
4546 printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
4547 ioc->name, __FILE__, __LINE__, __func__);
4548 return -1;
4549 }
4550
4551 ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
4552 MPI2_IOCSTATUS_MASK;
4553 if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
4554 printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
4555 ioc->name, __FILE__, __LINE__, __func__);
4556 return -1;
4557 }
4558
4559 sas_address = le64_to_cpu(sas_device_pg0.SASAddress);
4560
4561 /* check if device is present */
4562 if (!(le16_to_cpu(sas_device_pg0.Flags) &
4563 MPI2_SAS_DEVICE0_FLAGS_DEVICE_PRESENT)) {
4564 printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
4565 ioc->name, __FILE__, __LINE__, __func__);
4566 printk(MPT2SAS_ERR_FMT "Flags = 0x%04x\n",
4567 ioc->name, le16_to_cpu(sas_device_pg0.Flags));
4568 return -1;
4569 }
4570
4571 /* check if there were any issues with discovery */
4572 if (_scsih_check_access_status(ioc, sas_address, handle,
4573 sas_device_pg0.AccessStatus))
4574 return -1;
4575
4576 /* check if this is end device */
4577 device_info = le32_to_cpu(sas_device_pg0.DeviceInfo);
4578 if (!(_scsih_is_end_device(device_info))) {
4579 printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
4580 ioc->name, __FILE__, __LINE__, __func__);
4581 return -1;
4582 }
4583
4584
4585 spin_lock_irqsave(&ioc->sas_device_lock, flags);
4586 sas_device = mpt2sas_scsih_sas_device_find_by_sas_address(ioc,
4587 sas_address);
4588 spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
4589
4590 if (sas_device)
4591 return 0;
4592
4593 sas_device = kzalloc(sizeof(struct _sas_device),
4594 GFP_KERNEL);
4595 if (!sas_device) {
4596 printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
4597 ioc->name, __FILE__, __LINE__, __func__);
4598 return -1;
4599 }
4600
4601 sas_device->handle = handle;
4602 if (_scsih_get_sas_address(ioc, le16_to_cpu
4603 (sas_device_pg0.ParentDevHandle),
4604 &sas_device->sas_address_parent) != 0)
4605 printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
4606 ioc->name, __FILE__, __LINE__, __func__);
4607 sas_device->enclosure_handle =
4608 le16_to_cpu(sas_device_pg0.EnclosureHandle);
4609 sas_device->slot =
4610 le16_to_cpu(sas_device_pg0.Slot);
4611 sas_device->device_info = device_info;
4612 sas_device->sas_address = sas_address;
4613 sas_device->phy = sas_device_pg0.PhyNum;
4614
4615 /* get enclosure_logical_id */
4616 if (sas_device->enclosure_handle && !(mpt2sas_config_get_enclosure_pg0(
4617 ioc, &mpi_reply, &enclosure_pg0, MPI2_SAS_ENCLOS_PGAD_FORM_HANDLE,
4618 sas_device->enclosure_handle)))
4619 sas_device->enclosure_logical_id =
4620 le64_to_cpu(enclosure_pg0.EnclosureLogicalID);
4621
4622 /* get device name */
4623 sas_device->device_name = le64_to_cpu(sas_device_pg0.DeviceName);
4624
4625 if (ioc->wait_for_port_enable_to_complete)
4626 _scsih_sas_device_init_add(ioc, sas_device);
4627 else
4628 _scsih_sas_device_add(ioc, sas_device);
4629
4630 return 0;
4631 }
4632
4633 /**
4634 * _scsih_remove_device - removing sas device object
4635 * @ioc: per adapter object
4636 * @sas_device_delete: the sas_device object
4637 *
4638 * Return nothing.
4639 */
4640 static void
4641 _scsih_remove_device(struct MPT2SAS_ADAPTER *ioc,
4642 struct _sas_device *sas_device)
4643 {
4644 struct _sas_device sas_device_backup;
4645 struct MPT2SAS_TARGET *sas_target_priv_data;
4646
4647 if (!sas_device)
4648 return;
4649
4650 memcpy(&sas_device_backup, sas_device, sizeof(struct _sas_device));
4651 _scsih_sas_device_remove(ioc, sas_device);
4652
4653 dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: enter: "
4654 "handle(0x%04x), sas_addr(0x%016llx)\n", ioc->name, __func__,
4655 sas_device_backup.handle, (unsigned long long)
4656 sas_device_backup.sas_address));
4657
4658 if (sas_device_backup.starget && sas_device_backup.starget->hostdata) {
4659 sas_target_priv_data = sas_device_backup.starget->hostdata;
4660 sas_target_priv_data->deleted = 1;
4661 }
4662
4663 _scsih_ublock_io_device(ioc, sas_device_backup.handle);
4664
4665 mpt2sas_transport_port_remove(ioc, sas_device_backup.sas_address,
4666 sas_device_backup.sas_address_parent);
4667
4668 printk(MPT2SAS_INFO_FMT "removing handle(0x%04x), sas_addr"
4669 "(0x%016llx)\n", ioc->name, sas_device_backup.handle,
4670 (unsigned long long) sas_device_backup.sas_address);
4671
4672 dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: exit: "
4673 "handle(0x%04x), sas_addr(0x%016llx)\n", ioc->name, __func__,
4674 sas_device_backup.handle, (unsigned long long)
4675 sas_device_backup.sas_address));
4676 }
4677
4678 /**
4679 * mpt2sas_device_remove - removing device object
4680 * @ioc: per adapter object
4681 * @sas_address: expander sas_address
4682 *
4683 * Return nothing.
4684 */
4685 void
4686 mpt2sas_device_remove(struct MPT2SAS_ADAPTER *ioc, u64 sas_address)
4687 {
4688 struct _sas_device *sas_device;
4689 unsigned long flags;
4690
4691 if (ioc->shost_recovery)
4692 return;
4693
4694 spin_lock_irqsave(&ioc->sas_device_lock, flags);
4695 sas_device = mpt2sas_scsih_sas_device_find_by_sas_address(ioc,
4696 sas_address);
4697 if (!sas_device) {
4698 spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
4699 return;
4700 }
4701 spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
4702 _scsih_remove_device(ioc, sas_device);
4703 }
4704
4705 #ifdef CONFIG_SCSI_MPT2SAS_LOGGING
4706 /**
4707 * _scsih_sas_topology_change_event_debug - debug for topology event
4708 * @ioc: per adapter object
4709 * @event_data: event data payload
4710 * Context: user.
4711 */
4712 static void
4713 _scsih_sas_topology_change_event_debug(struct MPT2SAS_ADAPTER *ioc,
4714 Mpi2EventDataSasTopologyChangeList_t *event_data)
4715 {
4716 int i;
4717 u16 handle;
4718 u16 reason_code;
4719 u8 phy_number;
4720 char *status_str = NULL;
4721 u8 link_rate, prev_link_rate;
4722
4723 switch (event_data->ExpStatus) {
4724 case MPI2_EVENT_SAS_TOPO_ES_ADDED:
4725 status_str = "add";
4726 break;
4727 case MPI2_EVENT_SAS_TOPO_ES_NOT_RESPONDING:
4728 status_str = "remove";
4729 break;
4730 case MPI2_EVENT_SAS_TOPO_ES_RESPONDING:
4731 case 0:
4732 status_str = "responding";
4733 break;
4734 case MPI2_EVENT_SAS_TOPO_ES_DELAY_NOT_RESPONDING:
4735 status_str = "remove delay";
4736 break;
4737 default:
4738 status_str = "unknown status";
4739 break;
4740 }
4741 printk(MPT2SAS_INFO_FMT "sas topology change: (%s)\n",
4742 ioc->name, status_str);
4743 printk(KERN_INFO "\thandle(0x%04x), enclosure_handle(0x%04x) "
4744 "start_phy(%02d), count(%d)\n",
4745 le16_to_cpu(event_data->ExpanderDevHandle),
4746 le16_to_cpu(event_data->EnclosureHandle),
4747 event_data->StartPhyNum, event_data->NumEntries);
4748 for (i = 0; i < event_data->NumEntries; i++) {
4749 handle = le16_to_cpu(event_data->PHY[i].AttachedDevHandle);
4750 if (!handle)
4751 continue;
4752 phy_number = event_data->StartPhyNum + i;
4753 reason_code = event_data->PHY[i].PhyStatus &
4754 MPI2_EVENT_SAS_TOPO_RC_MASK;
4755 switch (reason_code) {
4756 case MPI2_EVENT_SAS_TOPO_RC_TARG_ADDED:
4757 status_str = "target add";
4758 break;
4759 case MPI2_EVENT_SAS_TOPO_RC_TARG_NOT_RESPONDING:
4760 status_str = "target remove";
4761 break;
4762 case MPI2_EVENT_SAS_TOPO_RC_DELAY_NOT_RESPONDING:
4763 status_str = "delay target remove";
4764 break;
4765 case MPI2_EVENT_SAS_TOPO_RC_PHY_CHANGED:
4766 status_str = "link rate change";
4767 break;
4768 case MPI2_EVENT_SAS_TOPO_RC_NO_CHANGE:
4769 status_str = "target responding";
4770 break;
4771 default:
4772 status_str = "unknown";
4773 break;
4774 }
4775 link_rate = event_data->PHY[i].LinkRate >> 4;
4776 prev_link_rate = event_data->PHY[i].LinkRate & 0xF;
4777 printk(KERN_INFO "\tphy(%02d), attached_handle(0x%04x): %s:"
4778 " link rate: new(0x%02x), old(0x%02x)\n", phy_number,
4779 handle, status_str, link_rate, prev_link_rate);
4780
4781 }
4782 }
4783 #endif
4784
4785 /**
4786 * _scsih_sas_topology_change_event - handle topology changes
4787 * @ioc: per adapter object
4788 * @fw_event: The fw_event_work object
4789 * Context: user.
4790 *
4791 */
4792 static void
4793 _scsih_sas_topology_change_event(struct MPT2SAS_ADAPTER *ioc,
4794 struct fw_event_work *fw_event)
4795 {
4796 int i;
4797 u16 parent_handle, handle;
4798 u16 reason_code;
4799 u8 phy_number, max_phys;
4800 struct _sas_node *sas_expander;
4801 struct _sas_device *sas_device;
4802 u64 sas_address;
4803 unsigned long flags;
4804 u8 link_rate, prev_link_rate;
4805 Mpi2EventDataSasTopologyChangeList_t *event_data = fw_event->event_data;
4806
4807 #ifdef CONFIG_SCSI_MPT2SAS_LOGGING
4808 if (ioc->logging_level & MPT_DEBUG_EVENT_WORK_TASK)
4809 _scsih_sas_topology_change_event_debug(ioc, event_data);
4810 #endif
4811
4812 if (ioc->shost_recovery || ioc->remove_host || ioc->pci_error_recovery)
4813 return;
4814
4815 if (!ioc->sas_hba.num_phys)
4816 _scsih_sas_host_add(ioc);
4817 else
4818 _scsih_sas_host_refresh(ioc);
4819
4820 if (fw_event->ignore) {
4821 dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "ignoring expander "
4822 "event\n", ioc->name));
4823 return;
4824 }
4825
4826 parent_handle = le16_to_cpu(event_data->ExpanderDevHandle);
4827
4828 /* handle expander add */
4829 if (event_data->ExpStatus == MPI2_EVENT_SAS_TOPO_ES_ADDED)
4830 if (_scsih_expander_add(ioc, parent_handle) != 0)
4831 return;
4832
4833 spin_lock_irqsave(&ioc->sas_node_lock, flags);
4834 sas_expander = mpt2sas_scsih_expander_find_by_handle(ioc,
4835 parent_handle);
4836 spin_unlock_irqrestore(&ioc->sas_node_lock, flags);
4837 if (sas_expander) {
4838 sas_address = sas_expander->sas_address;
4839 max_phys = sas_expander->num_phys;
4840 } else if (parent_handle < ioc->sas_hba.num_phys) {
4841 sas_address = ioc->sas_hba.sas_address;
4842 max_phys = ioc->sas_hba.num_phys;
4843 } else
4844 return;
4845
4846 /* handle siblings events */
4847 for (i = 0; i < event_data->NumEntries; i++) {
4848 if (fw_event->ignore) {
4849 dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "ignoring "
4850 "expander event\n", ioc->name));
4851 return;
4852 }
4853 if (ioc->shost_recovery || ioc->remove_host ||
4854 ioc->pci_error_recovery)
4855 return;
4856 phy_number = event_data->StartPhyNum + i;
4857 if (phy_number >= max_phys)
4858 continue;
4859 reason_code = event_data->PHY[i].PhyStatus &
4860 MPI2_EVENT_SAS_TOPO_RC_MASK;
4861 if ((event_data->PHY[i].PhyStatus &
4862 MPI2_EVENT_SAS_TOPO_PHYSTATUS_VACANT) && (reason_code !=
4863 MPI2_EVENT_SAS_TOPO_RC_TARG_NOT_RESPONDING))
4864 continue;
4865 handle = le16_to_cpu(event_data->PHY[i].AttachedDevHandle);
4866 if (!handle)
4867 continue;
4868 link_rate = event_data->PHY[i].LinkRate >> 4;
4869 prev_link_rate = event_data->PHY[i].LinkRate & 0xF;
4870 switch (reason_code) {
4871 case MPI2_EVENT_SAS_TOPO_RC_PHY_CHANGED:
4872
4873 if (link_rate == prev_link_rate)
4874 break;
4875
4876 mpt2sas_transport_update_links(ioc, sas_address,
4877 handle, phy_number, link_rate);
4878
4879 if (link_rate < MPI2_SAS_NEG_LINK_RATE_1_5)
4880 break;
4881
4882 _scsih_check_device(ioc, handle);
4883 break;
4884 case MPI2_EVENT_SAS_TOPO_RC_TARG_ADDED:
4885
4886 mpt2sas_transport_update_links(ioc, sas_address,
4887 handle, phy_number, link_rate);
4888
4889 _scsih_add_device(ioc, handle, phy_number, 0);
4890 break;
4891 case MPI2_EVENT_SAS_TOPO_RC_TARG_NOT_RESPONDING:
4892
4893 spin_lock_irqsave(&ioc->sas_device_lock, flags);
4894 sas_device = _scsih_sas_device_find_by_handle(ioc,
4895 handle);
4896 if (!sas_device) {
4897 spin_unlock_irqrestore(&ioc->sas_device_lock,
4898 flags);
4899 break;
4900 }
4901 spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
4902 _scsih_remove_device(ioc, sas_device);
4903 break;
4904 }
4905 }
4906
4907 /* handle expander removal */
4908 if (event_data->ExpStatus == MPI2_EVENT_SAS_TOPO_ES_NOT_RESPONDING &&
4909 sas_expander)
4910 mpt2sas_expander_remove(ioc, sas_address);
4911
4912 }
4913
4914 #ifdef CONFIG_SCSI_MPT2SAS_LOGGING
4915 /**
4916 * _scsih_sas_device_status_change_event_debug - debug for device event
4917 * @event_data: event data payload
4918 * Context: user.
4919 *
4920 * Return nothing.
4921 */
4922 static void
4923 _scsih_sas_device_status_change_event_debug(struct MPT2SAS_ADAPTER *ioc,
4924 Mpi2EventDataSasDeviceStatusChange_t *event_data)
4925 {
4926 char *reason_str = NULL;
4927
4928 switch (event_data->ReasonCode) {
4929 case MPI2_EVENT_SAS_DEV_STAT_RC_SMART_DATA:
4930 reason_str = "smart data";
4931 break;
4932 case MPI2_EVENT_SAS_DEV_STAT_RC_UNSUPPORTED:
4933 reason_str = "unsupported device discovered";
4934 break;
4935 case MPI2_EVENT_SAS_DEV_STAT_RC_INTERNAL_DEVICE_RESET:
4936 reason_str = "internal device reset";
4937 break;
4938 case MPI2_EVENT_SAS_DEV_STAT_RC_TASK_ABORT_INTERNAL:
4939 reason_str = "internal task abort";
4940 break;
4941 case MPI2_EVENT_SAS_DEV_STAT_RC_ABORT_TASK_SET_INTERNAL:
4942 reason_str = "internal task abort set";
4943 break;
4944 case MPI2_EVENT_SAS_DEV_STAT_RC_CLEAR_TASK_SET_INTERNAL:
4945 reason_str = "internal clear task set";
4946 break;
4947 case MPI2_EVENT_SAS_DEV_STAT_RC_QUERY_TASK_INTERNAL:
4948 reason_str = "internal query task";
4949 break;
4950 case MPI2_EVENT_SAS_DEV_STAT_RC_SATA_INIT_FAILURE:
4951 reason_str = "sata init failure";
4952 break;
4953 case MPI2_EVENT_SAS_DEV_STAT_RC_CMP_INTERNAL_DEV_RESET:
4954 reason_str = "internal device reset complete";
4955 break;
4956 case MPI2_EVENT_SAS_DEV_STAT_RC_CMP_TASK_ABORT_INTERNAL:
4957 reason_str = "internal task abort complete";
4958 break;
4959 case MPI2_EVENT_SAS_DEV_STAT_RC_ASYNC_NOTIFICATION:
4960 reason_str = "internal async notification";
4961 break;
4962 case MPI2_EVENT_SAS_DEV_STAT_RC_EXPANDER_REDUCED_FUNCTIONALITY:
4963 reason_str = "expander reduced functionality";
4964 break;
4965 case MPI2_EVENT_SAS_DEV_STAT_RC_CMP_EXPANDER_REDUCED_FUNCTIONALITY:
4966 reason_str = "expander reduced functionality complete";
4967 break;
4968 default:
4969 reason_str = "unknown reason";
4970 break;
4971 }
4972 printk(MPT2SAS_INFO_FMT "device status change: (%s)\n"
4973 "\thandle(0x%04x), sas address(0x%016llx)", ioc->name,
4974 reason_str, le16_to_cpu(event_data->DevHandle),
4975 (unsigned long long)le64_to_cpu(event_data->SASAddress));
4976 if (event_data->ReasonCode == MPI2_EVENT_SAS_DEV_STAT_RC_SMART_DATA)
4977 printk(MPT2SAS_INFO_FMT ", ASC(0x%x), ASCQ(0x%x)\n", ioc->name,
4978 event_data->ASC, event_data->ASCQ);
4979 printk(KERN_INFO "\n");
4980 }
4981 #endif
4982
4983 /**
4984 * _scsih_sas_device_status_change_event - handle device status change
4985 * @ioc: per adapter object
4986 * @fw_event: The fw_event_work object
4987 * Context: user.
4988 *
4989 * Return nothing.
4990 */
4991 static void
4992 _scsih_sas_device_status_change_event(struct MPT2SAS_ADAPTER *ioc,
4993 struct fw_event_work *fw_event)
4994 {
4995 struct MPT2SAS_TARGET *target_priv_data;
4996 struct _sas_device *sas_device;
4997 __le64 sas_address;
4998 unsigned long flags;
4999 Mpi2EventDataSasDeviceStatusChange_t *event_data =
5000 fw_event->event_data;
5001
5002 #ifdef CONFIG_SCSI_MPT2SAS_LOGGING
5003 if (ioc->logging_level & MPT_DEBUG_EVENT_WORK_TASK)
5004 _scsih_sas_device_status_change_event_debug(ioc,
5005 event_data);
5006 #endif
5007
5008 if (event_data->ReasonCode !=
5009 MPI2_EVENT_SAS_DEV_STAT_RC_INTERNAL_DEVICE_RESET &&
5010 event_data->ReasonCode !=
5011 MPI2_EVENT_SAS_DEV_STAT_RC_CMP_INTERNAL_DEV_RESET)
5012 return;
5013
5014 spin_lock_irqsave(&ioc->sas_device_lock, flags);
5015 sas_address = le64_to_cpu(event_data->SASAddress);
5016 sas_device = mpt2sas_scsih_sas_device_find_by_sas_address(ioc,
5017 sas_address);
5018 spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
5019
5020 if (!sas_device || !sas_device->starget)
5021 return;
5022
5023 target_priv_data = sas_device->starget->hostdata;
5024 if (!target_priv_data)
5025 return;
5026
5027 if (event_data->ReasonCode ==
5028 MPI2_EVENT_SAS_DEV_STAT_RC_INTERNAL_DEVICE_RESET)
5029 target_priv_data->tm_busy = 1;
5030 else
5031 target_priv_data->tm_busy = 0;
5032 }
5033
5034 #ifdef CONFIG_SCSI_MPT2SAS_LOGGING
5035 /**
5036 * _scsih_sas_enclosure_dev_status_change_event_debug - debug for enclosure event
5037 * @ioc: per adapter object
5038 * @event_data: event data payload
5039 * Context: user.
5040 *
5041 * Return nothing.
5042 */
5043 static void
5044 _scsih_sas_enclosure_dev_status_change_event_debug(struct MPT2SAS_ADAPTER *ioc,
5045 Mpi2EventDataSasEnclDevStatusChange_t *event_data)
5046 {
5047 char *reason_str = NULL;
5048
5049 switch (event_data->ReasonCode) {
5050 case MPI2_EVENT_SAS_ENCL_RC_ADDED:
5051 reason_str = "enclosure add";
5052 break;
5053 case MPI2_EVENT_SAS_ENCL_RC_NOT_RESPONDING:
5054 reason_str = "enclosure remove";
5055 break;
5056 default:
5057 reason_str = "unknown reason";
5058 break;
5059 }
5060
5061 printk(MPT2SAS_INFO_FMT "enclosure status change: (%s)\n"
5062 "\thandle(0x%04x), enclosure logical id(0x%016llx)"
5063 " number slots(%d)\n", ioc->name, reason_str,
5064 le16_to_cpu(event_data->EnclosureHandle),
5065 (unsigned long long)le64_to_cpu(event_data->EnclosureLogicalID),
5066 le16_to_cpu(event_data->StartSlot));
5067 }
5068 #endif
5069
5070 /**
5071 * _scsih_sas_enclosure_dev_status_change_event - handle enclosure events
5072 * @ioc: per adapter object
5073 * @fw_event: The fw_event_work object
5074 * Context: user.
5075 *
5076 * Return nothing.
5077 */
5078 static void
5079 _scsih_sas_enclosure_dev_status_change_event(struct MPT2SAS_ADAPTER *ioc,
5080 struct fw_event_work *fw_event)
5081 {
5082 #ifdef CONFIG_SCSI_MPT2SAS_LOGGING
5083 if (ioc->logging_level & MPT_DEBUG_EVENT_WORK_TASK)
5084 _scsih_sas_enclosure_dev_status_change_event_debug(ioc,
5085 fw_event->event_data);
5086 #endif
5087 }
5088
5089 /**
5090 * _scsih_sas_broadcast_primative_event - handle broadcast events
5091 * @ioc: per adapter object
5092 * @fw_event: The fw_event_work object
5093 * Context: user.
5094 *
5095 * Return nothing.
5096 */
5097 static void
5098 _scsih_sas_broadcast_primative_event(struct MPT2SAS_ADAPTER *ioc,
5099 struct fw_event_work *fw_event)
5100 {
5101 struct scsi_cmnd *scmd;
5102 u16 smid, handle;
5103 u32 lun;
5104 struct MPT2SAS_DEVICE *sas_device_priv_data;
5105 u32 termination_count;
5106 u32 query_count;
5107 Mpi2SCSITaskManagementReply_t *mpi_reply;
5108 #ifdef CONFIG_SCSI_MPT2SAS_LOGGING
5109 Mpi2EventDataSasBroadcastPrimitive_t *event_data = fw_event->event_data;
5110 #endif
5111 u16 ioc_status;
5112 dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "broadcast primative: "
5113 "phy number(%d), width(%d)\n", ioc->name, event_data->PhyNum,
5114 event_data->PortWidth));
5115 dtmprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: enter\n", ioc->name,
5116 __func__));
5117
5118 termination_count = 0;
5119 query_count = 0;
5120 mpi_reply = ioc->tm_cmds.reply;
5121 for (smid = 1; smid <= ioc->scsiio_depth; smid++) {
5122 scmd = _scsih_scsi_lookup_get(ioc, smid);
5123 if (!scmd)
5124 continue;
5125 sas_device_priv_data = scmd->device->hostdata;
5126 if (!sas_device_priv_data || !sas_device_priv_data->sas_target)
5127 continue;
5128 /* skip hidden raid components */
5129 if (sas_device_priv_data->sas_target->flags &
5130 MPT_TARGET_FLAGS_RAID_COMPONENT)
5131 continue;
5132 /* skip volumes */
5133 if (sas_device_priv_data->sas_target->flags &
5134 MPT_TARGET_FLAGS_VOLUME)
5135 continue;
5136
5137 handle = sas_device_priv_data->sas_target->handle;
5138 lun = sas_device_priv_data->lun;
5139 query_count++;
5140
5141 mpt2sas_scsih_issue_tm(ioc, handle, 0, 0, lun,
5142 MPI2_SCSITASKMGMT_TASKTYPE_QUERY_TASK, smid, 30, NULL);
5143 ioc->tm_cmds.status = MPT2_CMD_NOT_USED;
5144 ioc_status = le16_to_cpu(mpi_reply->IOCStatus)
5145 & MPI2_IOCSTATUS_MASK;
5146 if ((ioc_status == MPI2_IOCSTATUS_SUCCESS) &&
5147 (mpi_reply->ResponseCode ==
5148 MPI2_SCSITASKMGMT_RSP_TM_SUCCEEDED ||
5149 mpi_reply->ResponseCode ==
5150 MPI2_SCSITASKMGMT_RSP_IO_QUEUED_ON_IOC))
5151 continue;
5152
5153 mpt2sas_scsih_issue_tm(ioc, handle, 0, 0, lun,
5154 MPI2_SCSITASKMGMT_TASKTYPE_ABRT_TASK_SET, 0, 30, NULL);
5155 termination_count += le32_to_cpu(mpi_reply->TerminationCount);
5156 }
5157 ioc->broadcast_aen_busy = 0;
5158
5159 dtmprintk(ioc, printk(MPT2SAS_INFO_FMT
5160 "%s - exit, query_count = %d termination_count = %d\n",
5161 ioc->name, __func__, query_count, termination_count));
5162 }
5163
5164 /**
5165 * _scsih_sas_discovery_event - handle discovery events
5166 * @ioc: per adapter object
5167 * @fw_event: The fw_event_work object
5168 * Context: user.
5169 *
5170 * Return nothing.
5171 */
5172 static void
5173 _scsih_sas_discovery_event(struct MPT2SAS_ADAPTER *ioc,
5174 struct fw_event_work *fw_event)
5175 {
5176 Mpi2EventDataSasDiscovery_t *event_data = fw_event->event_data;
5177
5178 #ifdef CONFIG_SCSI_MPT2SAS_LOGGING
5179 if (ioc->logging_level & MPT_DEBUG_EVENT_WORK_TASK) {
5180 printk(MPT2SAS_INFO_FMT "discovery event: (%s)", ioc->name,
5181 (event_data->ReasonCode == MPI2_EVENT_SAS_DISC_RC_STARTED) ?
5182 "start" : "stop");
5183 if (event_data->DiscoveryStatus)
5184 printk("discovery_status(0x%08x)",
5185 le32_to_cpu(event_data->DiscoveryStatus));
5186 printk("\n");
5187 }
5188 #endif
5189
5190 if (event_data->ReasonCode == MPI2_EVENT_SAS_DISC_RC_STARTED &&
5191 !ioc->sas_hba.num_phys)
5192 _scsih_sas_host_add(ioc);
5193 }
5194
5195 /**
5196 * _scsih_reprobe_lun - reprobing lun
5197 * @sdev: scsi device struct
5198 * @no_uld_attach: sdev->no_uld_attach flag setting
5199 *
5200 **/
5201 static void
5202 _scsih_reprobe_lun(struct scsi_device *sdev, void *no_uld_attach)
5203 {
5204 int rc;
5205
5206 sdev->no_uld_attach = no_uld_attach ? 1 : 0;
5207 sdev_printk(KERN_INFO, sdev, "%s raid component\n",
5208 sdev->no_uld_attach ? "hidding" : "exposing");
5209 rc = scsi_device_reprobe(sdev);
5210 }
5211
5212 /**
5213 * _scsih_reprobe_target - reprobing target
5214 * @starget: scsi target struct
5215 * @no_uld_attach: sdev->no_uld_attach flag setting
5216 *
5217 * Note: no_uld_attach flag determines whether the disk device is attached
5218 * to block layer. A value of `1` means to not attach.
5219 **/
5220 static void
5221 _scsih_reprobe_target(struct scsi_target *starget, int no_uld_attach)
5222 {
5223 struct MPT2SAS_TARGET *sas_target_priv_data = starget->hostdata;
5224
5225 if (no_uld_attach)
5226 sas_target_priv_data->flags |= MPT_TARGET_FLAGS_RAID_COMPONENT;
5227 else
5228 sas_target_priv_data->flags &= ~MPT_TARGET_FLAGS_RAID_COMPONENT;
5229
5230 starget_for_each_device(starget, no_uld_attach ? (void *)1 : NULL,
5231 _scsih_reprobe_lun);
5232 }
5233 /**
5234 * _scsih_sas_volume_add - add new volume
5235 * @ioc: per adapter object
5236 * @element: IR config element data
5237 * Context: user.
5238 *
5239 * Return nothing.
5240 */
5241 static void
5242 _scsih_sas_volume_add(struct MPT2SAS_ADAPTER *ioc,
5243 Mpi2EventIrConfigElement_t *element)
5244 {
5245 struct _raid_device *raid_device;
5246 unsigned long flags;
5247 u64 wwid;
5248 u16 handle = le16_to_cpu(element->VolDevHandle);
5249 int rc;
5250
5251 mpt2sas_config_get_volume_wwid(ioc, handle, &wwid);
5252 if (!wwid) {
5253 printk(MPT2SAS_ERR_FMT
5254 "failure at %s:%d/%s()!\n", ioc->name,
5255 __FILE__, __LINE__, __func__);
5256 return;
5257 }
5258
5259 spin_lock_irqsave(&ioc->raid_device_lock, flags);
5260 raid_device = _scsih_raid_device_find_by_wwid(ioc, wwid);
5261 spin_unlock_irqrestore(&ioc->raid_device_lock, flags);
5262
5263 if (raid_device)
5264 return;
5265
5266 raid_device = kzalloc(sizeof(struct _raid_device), GFP_KERNEL);
5267 if (!raid_device) {
5268 printk(MPT2SAS_ERR_FMT
5269 "failure at %s:%d/%s()!\n", ioc->name,
5270 __FILE__, __LINE__, __func__);
5271 return;
5272 }
5273
5274 raid_device->id = ioc->sas_id++;
5275 raid_device->channel = RAID_CHANNEL;
5276 raid_device->handle = handle;
5277 raid_device->wwid = wwid;
5278 _scsih_raid_device_add(ioc, raid_device);
5279 if (!ioc->wait_for_port_enable_to_complete) {
5280 rc = scsi_add_device(ioc->shost, RAID_CHANNEL,
5281 raid_device->id, 0);
5282 if (rc)
5283 _scsih_raid_device_remove(ioc, raid_device);
5284 } else
5285 _scsih_determine_boot_device(ioc, raid_device, 1);
5286 }
5287
5288 /**
5289 * _scsih_sas_volume_delete - delete volume
5290 * @ioc: per adapter object
5291 * @handle: volume device handle
5292 * Context: user.
5293 *
5294 * Return nothing.
5295 */
5296 static void
5297 _scsih_sas_volume_delete(struct MPT2SAS_ADAPTER *ioc, u16 handle)
5298 {
5299 struct _raid_device *raid_device;
5300 unsigned long flags;
5301 struct MPT2SAS_TARGET *sas_target_priv_data;
5302
5303 spin_lock_irqsave(&ioc->raid_device_lock, flags);
5304 raid_device = _scsih_raid_device_find_by_handle(ioc, handle);
5305 spin_unlock_irqrestore(&ioc->raid_device_lock, flags);
5306 if (!raid_device)
5307 return;
5308 if (raid_device->starget) {
5309 sas_target_priv_data = raid_device->starget->hostdata;
5310 sas_target_priv_data->deleted = 1;
5311 scsi_remove_target(&raid_device->starget->dev);
5312 }
5313 printk(MPT2SAS_INFO_FMT "removing handle(0x%04x), wwid"
5314 "(0x%016llx)\n", ioc->name, raid_device->handle,
5315 (unsigned long long) raid_device->wwid);
5316 _scsih_raid_device_remove(ioc, raid_device);
5317 }
5318
5319 /**
5320 * _scsih_sas_pd_expose - expose pd component to /dev/sdX
5321 * @ioc: per adapter object
5322 * @element: IR config element data
5323 * Context: user.
5324 *
5325 * Return nothing.
5326 */
5327 static void
5328 _scsih_sas_pd_expose(struct MPT2SAS_ADAPTER *ioc,
5329 Mpi2EventIrConfigElement_t *element)
5330 {
5331 struct _sas_device *sas_device;
5332 unsigned long flags;
5333 u16 handle = le16_to_cpu(element->PhysDiskDevHandle);
5334
5335 spin_lock_irqsave(&ioc->sas_device_lock, flags);
5336 sas_device = _scsih_sas_device_find_by_handle(ioc, handle);
5337 spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
5338 if (!sas_device)
5339 return;
5340
5341 /* exposing raid component */
5342 sas_device->volume_handle = 0;
5343 sas_device->volume_wwid = 0;
5344 clear_bit(handle, ioc->pd_handles);
5345 _scsih_reprobe_target(sas_device->starget, 0);
5346 }
5347
5348 /**
5349 * _scsih_sas_pd_hide - hide pd component from /dev/sdX
5350 * @ioc: per adapter object
5351 * @element: IR config element data
5352 * Context: user.
5353 *
5354 * Return nothing.
5355 */
5356 static void
5357 _scsih_sas_pd_hide(struct MPT2SAS_ADAPTER *ioc,
5358 Mpi2EventIrConfigElement_t *element)
5359 {
5360 struct _sas_device *sas_device;
5361 unsigned long flags;
5362 u16 handle = le16_to_cpu(element->PhysDiskDevHandle);
5363
5364 spin_lock_irqsave(&ioc->sas_device_lock, flags);
5365 sas_device = _scsih_sas_device_find_by_handle(ioc, handle);
5366 spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
5367 if (!sas_device)
5368 return;
5369
5370 /* hiding raid component */
5371 mpt2sas_config_get_volume_handle(ioc, handle,
5372 &sas_device->volume_handle);
5373 mpt2sas_config_get_volume_wwid(ioc, sas_device->volume_handle,
5374 &sas_device->volume_wwid);
5375 set_bit(handle, ioc->pd_handles);
5376 _scsih_reprobe_target(sas_device->starget, 1);
5377 }
5378
5379 /**
5380 * _scsih_sas_pd_delete - delete pd component
5381 * @ioc: per adapter object
5382 * @element: IR config element data
5383 * Context: user.
5384 *
5385 * Return nothing.
5386 */
5387 static void
5388 _scsih_sas_pd_delete(struct MPT2SAS_ADAPTER *ioc,
5389 Mpi2EventIrConfigElement_t *element)
5390 {
5391 struct _sas_device *sas_device;
5392 unsigned long flags;
5393 u16 handle = le16_to_cpu(element->PhysDiskDevHandle);
5394
5395 spin_lock_irqsave(&ioc->sas_device_lock, flags);
5396 sas_device = _scsih_sas_device_find_by_handle(ioc, handle);
5397 spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
5398 if (!sas_device)
5399 return;
5400 _scsih_remove_device(ioc, sas_device);
5401 }
5402
5403 /**
5404 * _scsih_sas_pd_add - remove pd component
5405 * @ioc: per adapter object
5406 * @element: IR config element data
5407 * Context: user.
5408 *
5409 * Return nothing.
5410 */
5411 static void
5412 _scsih_sas_pd_add(struct MPT2SAS_ADAPTER *ioc,
5413 Mpi2EventIrConfigElement_t *element)
5414 {
5415 struct _sas_device *sas_device;
5416 unsigned long flags;
5417 u16 handle = le16_to_cpu(element->PhysDiskDevHandle);
5418 Mpi2ConfigReply_t mpi_reply;
5419 Mpi2SasDevicePage0_t sas_device_pg0;
5420 u32 ioc_status;
5421 u64 sas_address;
5422 u16 parent_handle;
5423
5424 set_bit(handle, ioc->pd_handles);
5425
5426 spin_lock_irqsave(&ioc->sas_device_lock, flags);
5427 sas_device = _scsih_sas_device_find_by_handle(ioc, handle);
5428 spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
5429 if (sas_device)
5430 return;
5431
5432 if ((mpt2sas_config_get_sas_device_pg0(ioc, &mpi_reply, &sas_device_pg0,
5433 MPI2_SAS_DEVICE_PGAD_FORM_HANDLE, handle))) {
5434 printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
5435 ioc->name, __FILE__, __LINE__, __func__);
5436 return;
5437 }
5438
5439 ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
5440 MPI2_IOCSTATUS_MASK;
5441 if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
5442 printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
5443 ioc->name, __FILE__, __LINE__, __func__);
5444 return;
5445 }
5446
5447 parent_handle = le16_to_cpu(sas_device_pg0.ParentDevHandle);
5448 if (!_scsih_get_sas_address(ioc, parent_handle, &sas_address))
5449 mpt2sas_transport_update_links(ioc, sas_address, handle,
5450 sas_device_pg0.PhyNum, MPI2_SAS_NEG_LINK_RATE_1_5);
5451
5452 _scsih_add_device(ioc, handle, 0, 1);
5453 }
5454
5455 #ifdef CONFIG_SCSI_MPT2SAS_LOGGING
5456 /**
5457 * _scsih_sas_ir_config_change_event_debug - debug for IR Config Change events
5458 * @ioc: per adapter object
5459 * @event_data: event data payload
5460 * Context: user.
5461 *
5462 * Return nothing.
5463 */
5464 static void
5465 _scsih_sas_ir_config_change_event_debug(struct MPT2SAS_ADAPTER *ioc,
5466 Mpi2EventDataIrConfigChangeList_t *event_data)
5467 {
5468 Mpi2EventIrConfigElement_t *element;
5469 u8 element_type;
5470 int i;
5471 char *reason_str = NULL, *element_str = NULL;
5472
5473 element = (Mpi2EventIrConfigElement_t *)&event_data->ConfigElement[0];
5474
5475 printk(MPT2SAS_INFO_FMT "raid config change: (%s), elements(%d)\n",
5476 ioc->name, (le32_to_cpu(event_data->Flags) &
5477 MPI2_EVENT_IR_CHANGE_FLAGS_FOREIGN_CONFIG) ?
5478 "foreign" : "native", event_data->NumElements);
5479 for (i = 0; i < event_data->NumElements; i++, element++) {
5480 switch (element->ReasonCode) {
5481 case MPI2_EVENT_IR_CHANGE_RC_ADDED:
5482 reason_str = "add";
5483 break;
5484 case MPI2_EVENT_IR_CHANGE_RC_REMOVED:
5485 reason_str = "remove";
5486 break;
5487 case MPI2_EVENT_IR_CHANGE_RC_NO_CHANGE:
5488 reason_str = "no change";
5489 break;
5490 case MPI2_EVENT_IR_CHANGE_RC_HIDE:
5491 reason_str = "hide";
5492 break;
5493 case MPI2_EVENT_IR_CHANGE_RC_UNHIDE:
5494 reason_str = "unhide";
5495 break;
5496 case MPI2_EVENT_IR_CHANGE_RC_VOLUME_CREATED:
5497 reason_str = "volume_created";
5498 break;
5499 case MPI2_EVENT_IR_CHANGE_RC_VOLUME_DELETED:
5500 reason_str = "volume_deleted";
5501 break;
5502 case MPI2_EVENT_IR_CHANGE_RC_PD_CREATED:
5503 reason_str = "pd_created";
5504 break;
5505 case MPI2_EVENT_IR_CHANGE_RC_PD_DELETED:
5506 reason_str = "pd_deleted";
5507 break;
5508 default:
5509 reason_str = "unknown reason";
5510 break;
5511 }
5512 element_type = le16_to_cpu(element->ElementFlags) &
5513 MPI2_EVENT_IR_CHANGE_EFLAGS_ELEMENT_TYPE_MASK;
5514 switch (element_type) {
5515 case MPI2_EVENT_IR_CHANGE_EFLAGS_VOLUME_ELEMENT:
5516 element_str = "volume";
5517 break;
5518 case MPI2_EVENT_IR_CHANGE_EFLAGS_VOLPHYSDISK_ELEMENT:
5519 element_str = "phys disk";
5520 break;
5521 case MPI2_EVENT_IR_CHANGE_EFLAGS_HOTSPARE_ELEMENT:
5522 element_str = "hot spare";
5523 break;
5524 default:
5525 element_str = "unknown element";
5526 break;
5527 }
5528 printk(KERN_INFO "\t(%s:%s), vol handle(0x%04x), "
5529 "pd handle(0x%04x), pd num(0x%02x)\n", element_str,
5530 reason_str, le16_to_cpu(element->VolDevHandle),
5531 le16_to_cpu(element->PhysDiskDevHandle),
5532 element->PhysDiskNum);
5533 }
5534 }
5535 #endif
5536
5537 /**
5538 * _scsih_sas_ir_config_change_event - handle ir configuration change events
5539 * @ioc: per adapter object
5540 * @fw_event: The fw_event_work object
5541 * Context: user.
5542 *
5543 * Return nothing.
5544 */
5545 static void
5546 _scsih_sas_ir_config_change_event(struct MPT2SAS_ADAPTER *ioc,
5547 struct fw_event_work *fw_event)
5548 {
5549 Mpi2EventIrConfigElement_t *element;
5550 int i;
5551 u8 foreign_config;
5552 Mpi2EventDataIrConfigChangeList_t *event_data = fw_event->event_data;
5553
5554 #ifdef CONFIG_SCSI_MPT2SAS_LOGGING
5555 if (ioc->logging_level & MPT_DEBUG_EVENT_WORK_TASK)
5556 _scsih_sas_ir_config_change_event_debug(ioc, event_data);
5557
5558 #endif
5559 foreign_config = (le32_to_cpu(event_data->Flags) &
5560 MPI2_EVENT_IR_CHANGE_FLAGS_FOREIGN_CONFIG) ? 1 : 0;
5561
5562 element = (Mpi2EventIrConfigElement_t *)&event_data->ConfigElement[0];
5563 for (i = 0; i < event_data->NumElements; i++, element++) {
5564
5565 switch (element->ReasonCode) {
5566 case MPI2_EVENT_IR_CHANGE_RC_VOLUME_CREATED:
5567 case MPI2_EVENT_IR_CHANGE_RC_ADDED:
5568 if (!foreign_config)
5569 _scsih_sas_volume_add(ioc, element);
5570 break;
5571 case MPI2_EVENT_IR_CHANGE_RC_VOLUME_DELETED:
5572 case MPI2_EVENT_IR_CHANGE_RC_REMOVED:
5573 if (!foreign_config)
5574 _scsih_sas_volume_delete(ioc,
5575 le16_to_cpu(element->VolDevHandle));
5576 break;
5577 case MPI2_EVENT_IR_CHANGE_RC_PD_CREATED:
5578 _scsih_sas_pd_hide(ioc, element);
5579 break;
5580 case MPI2_EVENT_IR_CHANGE_RC_PD_DELETED:
5581 _scsih_sas_pd_expose(ioc, element);
5582 break;
5583 case MPI2_EVENT_IR_CHANGE_RC_HIDE:
5584 _scsih_sas_pd_add(ioc, element);
5585 break;
5586 case MPI2_EVENT_IR_CHANGE_RC_UNHIDE:
5587 _scsih_sas_pd_delete(ioc, element);
5588 break;
5589 }
5590 }
5591 }
5592
5593 /**
5594 * _scsih_sas_ir_volume_event - IR volume event
5595 * @ioc: per adapter object
5596 * @fw_event: The fw_event_work object
5597 * Context: user.
5598 *
5599 * Return nothing.
5600 */
5601 static void
5602 _scsih_sas_ir_volume_event(struct MPT2SAS_ADAPTER *ioc,
5603 struct fw_event_work *fw_event)
5604 {
5605 u64 wwid;
5606 unsigned long flags;
5607 struct _raid_device *raid_device;
5608 u16 handle;
5609 u32 state;
5610 int rc;
5611 Mpi2EventDataIrVolume_t *event_data = fw_event->event_data;
5612
5613 if (event_data->ReasonCode != MPI2_EVENT_IR_VOLUME_RC_STATE_CHANGED)
5614 return;
5615
5616 handle = le16_to_cpu(event_data->VolDevHandle);
5617 state = le32_to_cpu(event_data->NewValue);
5618 dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: handle(0x%04x), "
5619 "old(0x%08x), new(0x%08x)\n", ioc->name, __func__, handle,
5620 le32_to_cpu(event_data->PreviousValue), state));
5621
5622 switch (state) {
5623 case MPI2_RAID_VOL_STATE_MISSING:
5624 case MPI2_RAID_VOL_STATE_FAILED:
5625 _scsih_sas_volume_delete(ioc, handle);
5626 break;
5627
5628 case MPI2_RAID_VOL_STATE_ONLINE:
5629 case MPI2_RAID_VOL_STATE_DEGRADED:
5630 case MPI2_RAID_VOL_STATE_OPTIMAL:
5631
5632 spin_lock_irqsave(&ioc->raid_device_lock, flags);
5633 raid_device = _scsih_raid_device_find_by_handle(ioc, handle);
5634 spin_unlock_irqrestore(&ioc->raid_device_lock, flags);
5635
5636 if (raid_device)
5637 break;
5638
5639 mpt2sas_config_get_volume_wwid(ioc, handle, &wwid);
5640 if (!wwid) {
5641 printk(MPT2SAS_ERR_FMT
5642 "failure at %s:%d/%s()!\n", ioc->name,
5643 __FILE__, __LINE__, __func__);
5644 break;
5645 }
5646
5647 raid_device = kzalloc(sizeof(struct _raid_device), GFP_KERNEL);
5648 if (!raid_device) {
5649 printk(MPT2SAS_ERR_FMT
5650 "failure at %s:%d/%s()!\n", ioc->name,
5651 __FILE__, __LINE__, __func__);
5652 break;
5653 }
5654
5655 raid_device->id = ioc->sas_id++;
5656 raid_device->channel = RAID_CHANNEL;
5657 raid_device->handle = handle;
5658 raid_device->wwid = wwid;
5659 _scsih_raid_device_add(ioc, raid_device);
5660 rc = scsi_add_device(ioc->shost, RAID_CHANNEL,
5661 raid_device->id, 0);
5662 if (rc)
5663 _scsih_raid_device_remove(ioc, raid_device);
5664 break;
5665
5666 case MPI2_RAID_VOL_STATE_INITIALIZING:
5667 default:
5668 break;
5669 }
5670 }
5671
5672 /**
5673 * _scsih_sas_ir_physical_disk_event - PD event
5674 * @ioc: per adapter object
5675 * @fw_event: The fw_event_work object
5676 * Context: user.
5677 *
5678 * Return nothing.
5679 */
5680 static void
5681 _scsih_sas_ir_physical_disk_event(struct MPT2SAS_ADAPTER *ioc,
5682 struct fw_event_work *fw_event)
5683 {
5684 u16 handle, parent_handle;
5685 u32 state;
5686 struct _sas_device *sas_device;
5687 unsigned long flags;
5688 Mpi2ConfigReply_t mpi_reply;
5689 Mpi2SasDevicePage0_t sas_device_pg0;
5690 u32 ioc_status;
5691 Mpi2EventDataIrPhysicalDisk_t *event_data = fw_event->event_data;
5692 u64 sas_address;
5693
5694 if (event_data->ReasonCode != MPI2_EVENT_IR_PHYSDISK_RC_STATE_CHANGED)
5695 return;
5696
5697 handle = le16_to_cpu(event_data->PhysDiskDevHandle);
5698 state = le32_to_cpu(event_data->NewValue);
5699
5700 dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: handle(0x%04x), "
5701 "old(0x%08x), new(0x%08x)\n", ioc->name, __func__, handle,
5702 le32_to_cpu(event_data->PreviousValue), state));
5703
5704 switch (state) {
5705 case MPI2_RAID_PD_STATE_ONLINE:
5706 case MPI2_RAID_PD_STATE_DEGRADED:
5707 case MPI2_RAID_PD_STATE_REBUILDING:
5708 case MPI2_RAID_PD_STATE_OPTIMAL:
5709 case MPI2_RAID_PD_STATE_HOT_SPARE:
5710
5711 set_bit(handle, ioc->pd_handles);
5712
5713 spin_lock_irqsave(&ioc->sas_device_lock, flags);
5714 sas_device = _scsih_sas_device_find_by_handle(ioc, handle);
5715 spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
5716
5717 if (sas_device)
5718 return;
5719
5720 if ((mpt2sas_config_get_sas_device_pg0(ioc, &mpi_reply,
5721 &sas_device_pg0, MPI2_SAS_DEVICE_PGAD_FORM_HANDLE,
5722 handle))) {
5723 printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
5724 ioc->name, __FILE__, __LINE__, __func__);
5725 return;
5726 }
5727
5728 ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
5729 MPI2_IOCSTATUS_MASK;
5730 if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
5731 printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
5732 ioc->name, __FILE__, __LINE__, __func__);
5733 return;
5734 }
5735
5736 parent_handle = le16_to_cpu(sas_device_pg0.ParentDevHandle);
5737 if (!_scsih_get_sas_address(ioc, parent_handle, &sas_address))
5738 mpt2sas_transport_update_links(ioc, sas_address, handle,
5739 sas_device_pg0.PhyNum, MPI2_SAS_NEG_LINK_RATE_1_5);
5740
5741 _scsih_add_device(ioc, handle, 0, 1);
5742
5743 break;
5744
5745 case MPI2_RAID_PD_STATE_OFFLINE:
5746 case MPI2_RAID_PD_STATE_NOT_CONFIGURED:
5747 case MPI2_RAID_PD_STATE_NOT_COMPATIBLE:
5748 default:
5749 break;
5750 }
5751 }
5752
5753 #ifdef CONFIG_SCSI_MPT2SAS_LOGGING
5754 /**
5755 * _scsih_sas_ir_operation_status_event_debug - debug for IR op event
5756 * @ioc: per adapter object
5757 * @event_data: event data payload
5758 * Context: user.
5759 *
5760 * Return nothing.
5761 */
5762 static void
5763 _scsih_sas_ir_operation_status_event_debug(struct MPT2SAS_ADAPTER *ioc,
5764 Mpi2EventDataIrOperationStatus_t *event_data)
5765 {
5766 char *reason_str = NULL;
5767
5768 switch (event_data->RAIDOperation) {
5769 case MPI2_EVENT_IR_RAIDOP_RESYNC:
5770 reason_str = "resync";
5771 break;
5772 case MPI2_EVENT_IR_RAIDOP_ONLINE_CAP_EXPANSION:
5773 reason_str = "online capacity expansion";
5774 break;
5775 case MPI2_EVENT_IR_RAIDOP_CONSISTENCY_CHECK:
5776 reason_str = "consistency check";
5777 break;
5778 case MPI2_EVENT_IR_RAIDOP_BACKGROUND_INIT:
5779 reason_str = "background init";
5780 break;
5781 case MPI2_EVENT_IR_RAIDOP_MAKE_DATA_CONSISTENT:
5782 reason_str = "make data consistent";
5783 break;
5784 }
5785
5786 if (!reason_str)
5787 return;
5788
5789 printk(MPT2SAS_INFO_FMT "raid operational status: (%s)"
5790 "\thandle(0x%04x), percent complete(%d)\n",
5791 ioc->name, reason_str,
5792 le16_to_cpu(event_data->VolDevHandle),
5793 event_data->PercentComplete);
5794 }
5795 #endif
5796
5797 /**
5798 * _scsih_sas_ir_operation_status_event - handle RAID operation events
5799 * @ioc: per adapter object
5800 * @fw_event: The fw_event_work object
5801 * Context: user.
5802 *
5803 * Return nothing.
5804 */
5805 static void
5806 _scsih_sas_ir_operation_status_event(struct MPT2SAS_ADAPTER *ioc,
5807 struct fw_event_work *fw_event)
5808 {
5809 Mpi2EventDataIrOperationStatus_t *event_data = fw_event->event_data;
5810 static struct _raid_device *raid_device;
5811 unsigned long flags;
5812 u16 handle;
5813
5814 #ifdef CONFIG_SCSI_MPT2SAS_LOGGING
5815 if (ioc->logging_level & MPT_DEBUG_EVENT_WORK_TASK)
5816 _scsih_sas_ir_operation_status_event_debug(ioc,
5817 event_data);
5818 #endif
5819
5820 /* code added for raid transport support */
5821 if (event_data->RAIDOperation == MPI2_EVENT_IR_RAIDOP_RESYNC) {
5822
5823 handle = le16_to_cpu(event_data->VolDevHandle);
5824
5825 spin_lock_irqsave(&ioc->raid_device_lock, flags);
5826 raid_device = _scsih_raid_device_find_by_handle(ioc, handle);
5827 spin_unlock_irqrestore(&ioc->raid_device_lock, flags);
5828
5829 if (!raid_device)
5830 return;
5831
5832 if (event_data->RAIDOperation == MPI2_EVENT_IR_RAIDOP_RESYNC)
5833 raid_device->percent_complete =
5834 event_data->PercentComplete;
5835 }
5836 }
5837
5838 /**
5839 * _scsih_prep_device_scan - initialize parameters prior to device scan
5840 * @ioc: per adapter object
5841 *
5842 * Set the deleted flag prior to device scan. If the device is found during
5843 * the scan, then we clear the deleted flag.
5844 */
5845 static void
5846 _scsih_prep_device_scan(struct MPT2SAS_ADAPTER *ioc)
5847 {
5848 struct MPT2SAS_DEVICE *sas_device_priv_data;
5849 struct scsi_device *sdev;
5850
5851 shost_for_each_device(sdev, ioc->shost) {
5852 sas_device_priv_data = sdev->hostdata;
5853 if (sas_device_priv_data && sas_device_priv_data->sas_target)
5854 sas_device_priv_data->sas_target->deleted = 1;
5855 }
5856 }
5857
5858 /**
5859 * _scsih_mark_responding_sas_device - mark a sas_devices as responding
5860 * @ioc: per adapter object
5861 * @sas_address: sas address
5862 * @slot: enclosure slot id
5863 * @handle: device handle
5864 *
5865 * After host reset, find out whether devices are still responding.
5866 * Used in _scsi_remove_unresponsive_sas_devices.
5867 *
5868 * Return nothing.
5869 */
5870 static void
5871 _scsih_mark_responding_sas_device(struct MPT2SAS_ADAPTER *ioc, u64 sas_address,
5872 u16 slot, u16 handle)
5873 {
5874 struct MPT2SAS_TARGET *sas_target_priv_data;
5875 struct scsi_target *starget;
5876 struct _sas_device *sas_device;
5877 unsigned long flags;
5878
5879 spin_lock_irqsave(&ioc->sas_device_lock, flags);
5880 list_for_each_entry(sas_device, &ioc->sas_device_list, list) {
5881 if (sas_device->sas_address == sas_address &&
5882 sas_device->slot == slot && sas_device->starget) {
5883 sas_device->responding = 1;
5884 starget = sas_device->starget;
5885 if (starget && starget->hostdata) {
5886 sas_target_priv_data = starget->hostdata;
5887 sas_target_priv_data->tm_busy = 0;
5888 sas_target_priv_data->deleted = 0;
5889 } else
5890 sas_target_priv_data = NULL;
5891 starget_printk(KERN_INFO, sas_device->starget,
5892 "handle(0x%04x), sas_addr(0x%016llx), enclosure "
5893 "logical id(0x%016llx), slot(%d)\n", handle,
5894 (unsigned long long)sas_device->sas_address,
5895 (unsigned long long)
5896 sas_device->enclosure_logical_id,
5897 sas_device->slot);
5898 if (sas_device->handle == handle)
5899 goto out;
5900 printk(KERN_INFO "\thandle changed from(0x%04x)!!!\n",
5901 sas_device->handle);
5902 sas_device->handle = handle;
5903 if (sas_target_priv_data)
5904 sas_target_priv_data->handle = handle;
5905 goto out;
5906 }
5907 }
5908 out:
5909 spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
5910 }
5911
5912 /**
5913 * _scsih_search_responding_sas_devices -
5914 * @ioc: per adapter object
5915 *
5916 * After host reset, find out whether devices are still responding.
5917 * If not remove.
5918 *
5919 * Return nothing.
5920 */
5921 static void
5922 _scsih_search_responding_sas_devices(struct MPT2SAS_ADAPTER *ioc)
5923 {
5924 Mpi2SasDevicePage0_t sas_device_pg0;
5925 Mpi2ConfigReply_t mpi_reply;
5926 u16 ioc_status;
5927 __le64 sas_address;
5928 u16 handle;
5929 u32 device_info;
5930 u16 slot;
5931
5932 printk(MPT2SAS_INFO_FMT "%s\n", ioc->name, __func__);
5933
5934 if (list_empty(&ioc->sas_device_list))
5935 return;
5936
5937 handle = 0xFFFF;
5938 while (!(mpt2sas_config_get_sas_device_pg0(ioc, &mpi_reply,
5939 &sas_device_pg0, MPI2_SAS_DEVICE_PGAD_FORM_GET_NEXT_HANDLE,
5940 handle))) {
5941 ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
5942 MPI2_IOCSTATUS_MASK;
5943 if (ioc_status == MPI2_IOCSTATUS_CONFIG_INVALID_PAGE)
5944 break;
5945 handle = le16_to_cpu(sas_device_pg0.DevHandle);
5946 device_info = le32_to_cpu(sas_device_pg0.DeviceInfo);
5947 if (!(_scsih_is_end_device(device_info)))
5948 continue;
5949 sas_address = le64_to_cpu(sas_device_pg0.SASAddress);
5950 slot = le16_to_cpu(sas_device_pg0.Slot);
5951 _scsih_mark_responding_sas_device(ioc, sas_address, slot,
5952 handle);
5953 }
5954 }
5955
5956 /**
5957 * _scsih_mark_responding_raid_device - mark a raid_device as responding
5958 * @ioc: per adapter object
5959 * @wwid: world wide identifier for raid volume
5960 * @handle: device handle
5961 *
5962 * After host reset, find out whether devices are still responding.
5963 * Used in _scsi_remove_unresponsive_raid_devices.
5964 *
5965 * Return nothing.
5966 */
5967 static void
5968 _scsih_mark_responding_raid_device(struct MPT2SAS_ADAPTER *ioc, u64 wwid,
5969 u16 handle)
5970 {
5971 struct MPT2SAS_TARGET *sas_target_priv_data;
5972 struct scsi_target *starget;
5973 struct _raid_device *raid_device;
5974 unsigned long flags;
5975
5976 spin_lock_irqsave(&ioc->raid_device_lock, flags);
5977 list_for_each_entry(raid_device, &ioc->raid_device_list, list) {
5978 if (raid_device->wwid == wwid && raid_device->starget) {
5979 starget = raid_device->starget;
5980 if (starget && starget->hostdata) {
5981 sas_target_priv_data = starget->hostdata;
5982 sas_target_priv_data->deleted = 0;
5983 } else
5984 sas_target_priv_data = NULL;
5985 raid_device->responding = 1;
5986 starget_printk(KERN_INFO, raid_device->starget,
5987 "handle(0x%04x), wwid(0x%016llx)\n", handle,
5988 (unsigned long long)raid_device->wwid);
5989 if (raid_device->handle == handle)
5990 goto out;
5991 printk(KERN_INFO "\thandle changed from(0x%04x)!!!\n",
5992 raid_device->handle);
5993 raid_device->handle = handle;
5994 if (sas_target_priv_data)
5995 sas_target_priv_data->handle = handle;
5996 goto out;
5997 }
5998 }
5999 out:
6000 spin_unlock_irqrestore(&ioc->raid_device_lock, flags);
6001 }
6002
6003 /**
6004 * _scsih_search_responding_raid_devices -
6005 * @ioc: per adapter object
6006 *
6007 * After host reset, find out whether devices are still responding.
6008 * If not remove.
6009 *
6010 * Return nothing.
6011 */
6012 static void
6013 _scsih_search_responding_raid_devices(struct MPT2SAS_ADAPTER *ioc)
6014 {
6015 Mpi2RaidVolPage1_t volume_pg1;
6016 Mpi2RaidVolPage0_t volume_pg0;
6017 Mpi2RaidPhysDiskPage0_t pd_pg0;
6018 Mpi2ConfigReply_t mpi_reply;
6019 u16 ioc_status;
6020 u16 handle;
6021 u8 phys_disk_num;
6022
6023 printk(MPT2SAS_INFO_FMT "%s\n", ioc->name, __func__);
6024
6025 if (list_empty(&ioc->raid_device_list))
6026 return;
6027
6028 handle = 0xFFFF;
6029 while (!(mpt2sas_config_get_raid_volume_pg1(ioc, &mpi_reply,
6030 &volume_pg1, MPI2_RAID_VOLUME_PGAD_FORM_GET_NEXT_HANDLE, handle))) {
6031 ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
6032 MPI2_IOCSTATUS_MASK;
6033 if (ioc_status == MPI2_IOCSTATUS_CONFIG_INVALID_PAGE)
6034 break;
6035 handle = le16_to_cpu(volume_pg1.DevHandle);
6036
6037 if (mpt2sas_config_get_raid_volume_pg0(ioc, &mpi_reply,
6038 &volume_pg0, MPI2_RAID_VOLUME_PGAD_FORM_HANDLE, handle,
6039 sizeof(Mpi2RaidVolPage0_t)))
6040 continue;
6041
6042 if (volume_pg0.VolumeState == MPI2_RAID_VOL_STATE_OPTIMAL ||
6043 volume_pg0.VolumeState == MPI2_RAID_VOL_STATE_ONLINE ||
6044 volume_pg0.VolumeState == MPI2_RAID_VOL_STATE_DEGRADED)
6045 _scsih_mark_responding_raid_device(ioc,
6046 le64_to_cpu(volume_pg1.WWID), handle);
6047 }
6048
6049 /* refresh the pd_handles */
6050 phys_disk_num = 0xFF;
6051 memset(ioc->pd_handles, 0, ioc->pd_handles_sz);
6052 while (!(mpt2sas_config_get_phys_disk_pg0(ioc, &mpi_reply,
6053 &pd_pg0, MPI2_PHYSDISK_PGAD_FORM_GET_NEXT_PHYSDISKNUM,
6054 phys_disk_num))) {
6055 ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
6056 MPI2_IOCSTATUS_MASK;
6057 if (ioc_status == MPI2_IOCSTATUS_CONFIG_INVALID_PAGE)
6058 break;
6059 phys_disk_num = pd_pg0.PhysDiskNum;
6060 handle = le16_to_cpu(pd_pg0.DevHandle);
6061 set_bit(handle, ioc->pd_handles);
6062 }
6063 }
6064
6065 /**
6066 * _scsih_mark_responding_expander - mark a expander as responding
6067 * @ioc: per adapter object
6068 * @sas_address: sas address
6069 * @handle:
6070 *
6071 * After host reset, find out whether devices are still responding.
6072 * Used in _scsi_remove_unresponsive_expanders.
6073 *
6074 * Return nothing.
6075 */
6076 static void
6077 _scsih_mark_responding_expander(struct MPT2SAS_ADAPTER *ioc, u64 sas_address,
6078 u16 handle)
6079 {
6080 struct _sas_node *sas_expander;
6081 unsigned long flags;
6082 int i;
6083
6084 spin_lock_irqsave(&ioc->sas_node_lock, flags);
6085 list_for_each_entry(sas_expander, &ioc->sas_expander_list, list) {
6086 if (sas_expander->sas_address != sas_address)
6087 continue;
6088 sas_expander->responding = 1;
6089 if (sas_expander->handle == handle)
6090 goto out;
6091 printk(KERN_INFO "\texpander(0x%016llx): handle changed"
6092 " from(0x%04x) to (0x%04x)!!!\n",
6093 (unsigned long long)sas_expander->sas_address,
6094 sas_expander->handle, handle);
6095 sas_expander->handle = handle;
6096 for (i = 0 ; i < sas_expander->num_phys ; i++)
6097 sas_expander->phy[i].handle = handle;
6098 goto out;
6099 }
6100 out:
6101 spin_unlock_irqrestore(&ioc->sas_node_lock, flags);
6102 }
6103
6104 /**
6105 * _scsih_search_responding_expanders -
6106 * @ioc: per adapter object
6107 *
6108 * After host reset, find out whether devices are still responding.
6109 * If not remove.
6110 *
6111 * Return nothing.
6112 */
6113 static void
6114 _scsih_search_responding_expanders(struct MPT2SAS_ADAPTER *ioc)
6115 {
6116 Mpi2ExpanderPage0_t expander_pg0;
6117 Mpi2ConfigReply_t mpi_reply;
6118 u16 ioc_status;
6119 __le64 sas_address;
6120 u16 handle;
6121
6122 printk(MPT2SAS_INFO_FMT "%s\n", ioc->name, __func__);
6123
6124 if (list_empty(&ioc->sas_expander_list))
6125 return;
6126
6127 handle = 0xFFFF;
6128 while (!(mpt2sas_config_get_expander_pg0(ioc, &mpi_reply, &expander_pg0,
6129 MPI2_SAS_EXPAND_PGAD_FORM_GET_NEXT_HNDL, handle))) {
6130
6131 ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
6132 MPI2_IOCSTATUS_MASK;
6133 if (ioc_status == MPI2_IOCSTATUS_CONFIG_INVALID_PAGE)
6134 break;
6135
6136 handle = le16_to_cpu(expander_pg0.DevHandle);
6137 sas_address = le64_to_cpu(expander_pg0.SASAddress);
6138 printk(KERN_INFO "\texpander present: handle(0x%04x), "
6139 "sas_addr(0x%016llx)\n", handle,
6140 (unsigned long long)sas_address);
6141 _scsih_mark_responding_expander(ioc, sas_address, handle);
6142 }
6143
6144 }
6145
6146 /**
6147 * _scsih_remove_unresponding_sas_devices - removing unresponding devices
6148 * @ioc: per adapter object
6149 *
6150 * Return nothing.
6151 */
6152 static void
6153 _scsih_remove_unresponding_sas_devices(struct MPT2SAS_ADAPTER *ioc)
6154 {
6155 struct _sas_device *sas_device, *sas_device_next;
6156 struct _sas_node *sas_expander;
6157 struct _raid_device *raid_device, *raid_device_next;
6158
6159
6160 list_for_each_entry_safe(sas_device, sas_device_next,
6161 &ioc->sas_device_list, list) {
6162 if (sas_device->responding) {
6163 sas_device->responding = 0;
6164 continue;
6165 }
6166 if (sas_device->starget)
6167 starget_printk(KERN_INFO, sas_device->starget,
6168 "removing: handle(0x%04x), sas_addr(0x%016llx), "
6169 "enclosure logical id(0x%016llx), slot(%d)\n",
6170 sas_device->handle,
6171 (unsigned long long)sas_device->sas_address,
6172 (unsigned long long)
6173 sas_device->enclosure_logical_id,
6174 sas_device->slot);
6175 _scsih_remove_device(ioc, sas_device);
6176 }
6177
6178 list_for_each_entry_safe(raid_device, raid_device_next,
6179 &ioc->raid_device_list, list) {
6180 if (raid_device->responding) {
6181 raid_device->responding = 0;
6182 continue;
6183 }
6184 if (raid_device->starget) {
6185 starget_printk(KERN_INFO, raid_device->starget,
6186 "removing: handle(0x%04x), wwid(0x%016llx)\n",
6187 raid_device->handle,
6188 (unsigned long long)raid_device->wwid);
6189 scsi_remove_target(&raid_device->starget->dev);
6190 }
6191 _scsih_raid_device_remove(ioc, raid_device);
6192 }
6193
6194 retry_expander_search:
6195 sas_expander = NULL;
6196 list_for_each_entry(sas_expander, &ioc->sas_expander_list, list) {
6197 if (sas_expander->responding) {
6198 sas_expander->responding = 0;
6199 continue;
6200 }
6201 mpt2sas_expander_remove(ioc, sas_expander->sas_address);
6202 goto retry_expander_search;
6203 }
6204 }
6205
6206 /**
6207 * mpt2sas_scsih_reset_handler - reset callback handler (for scsih)
6208 * @ioc: per adapter object
6209 * @reset_phase: phase
6210 *
6211 * The handler for doing any required cleanup or initialization.
6212 *
6213 * The reset phase can be MPT2_IOC_PRE_RESET, MPT2_IOC_AFTER_RESET,
6214 * MPT2_IOC_DONE_RESET
6215 *
6216 * Return nothing.
6217 */
6218 void
6219 mpt2sas_scsih_reset_handler(struct MPT2SAS_ADAPTER *ioc, int reset_phase)
6220 {
6221 switch (reset_phase) {
6222 case MPT2_IOC_PRE_RESET:
6223 dtmprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: "
6224 "MPT2_IOC_PRE_RESET\n", ioc->name, __func__));
6225 break;
6226 case MPT2_IOC_AFTER_RESET:
6227 dtmprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: "
6228 "MPT2_IOC_AFTER_RESET\n", ioc->name, __func__));
6229 if (ioc->scsih_cmds.status & MPT2_CMD_PENDING) {
6230 ioc->scsih_cmds.status |= MPT2_CMD_RESET;
6231 mpt2sas_base_free_smid(ioc, ioc->scsih_cmds.smid);
6232 complete(&ioc->scsih_cmds.done);
6233 }
6234 if (ioc->tm_cmds.status & MPT2_CMD_PENDING) {
6235 ioc->tm_cmds.status |= MPT2_CMD_RESET;
6236 mpt2sas_base_free_smid(ioc, ioc->tm_cmds.smid);
6237 complete(&ioc->tm_cmds.done);
6238 }
6239 _scsih_fw_event_cleanup_queue(ioc);
6240 _scsih_flush_running_cmds(ioc);
6241 _scsih_queue_rescan(ioc);
6242 break;
6243 case MPT2_IOC_DONE_RESET:
6244 dtmprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: "
6245 "MPT2_IOC_DONE_RESET\n", ioc->name, __func__));
6246 _scsih_sas_host_refresh(ioc);
6247 _scsih_prep_device_scan(ioc);
6248 _scsih_search_responding_sas_devices(ioc);
6249 _scsih_search_responding_raid_devices(ioc);
6250 _scsih_search_responding_expanders(ioc);
6251 break;
6252 }
6253 }
6254
6255 /**
6256 * _firmware_event_work - delayed task for processing firmware events
6257 * @ioc: per adapter object
6258 * @work: equal to the fw_event_work object
6259 * Context: user.
6260 *
6261 * Return nothing.
6262 */
6263 static void
6264 _firmware_event_work(struct work_struct *work)
6265 {
6266 struct fw_event_work *fw_event = container_of(work,
6267 struct fw_event_work, delayed_work.work);
6268 unsigned long flags;
6269 struct MPT2SAS_ADAPTER *ioc = fw_event->ioc;
6270
6271 /* the queue is being flushed so ignore this event */
6272 if (ioc->remove_host || fw_event->cancel_pending_work ||
6273 ioc->pci_error_recovery) {
6274 _scsih_fw_event_free(ioc, fw_event);
6275 return;
6276 }
6277
6278 if (fw_event->event == MPT2SAS_RESCAN_AFTER_HOST_RESET) {
6279 _scsih_fw_event_free(ioc, fw_event);
6280 spin_lock_irqsave(&ioc->ioc_reset_in_progress_lock, flags);
6281 if (ioc->shost_recovery) {
6282 init_completion(&ioc->shost_recovery_done);
6283 spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock,
6284 flags);
6285 wait_for_completion(&ioc->shost_recovery_done);
6286 } else
6287 spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock,
6288 flags);
6289 _scsih_remove_unresponding_sas_devices(ioc);
6290 return;
6291 }
6292
6293 switch (fw_event->event) {
6294 case MPI2_EVENT_SAS_TOPOLOGY_CHANGE_LIST:
6295 _scsih_sas_topology_change_event(ioc, fw_event);
6296 break;
6297 case MPI2_EVENT_SAS_DEVICE_STATUS_CHANGE:
6298 _scsih_sas_device_status_change_event(ioc,
6299 fw_event);
6300 break;
6301 case MPI2_EVENT_SAS_DISCOVERY:
6302 _scsih_sas_discovery_event(ioc,
6303 fw_event);
6304 break;
6305 case MPI2_EVENT_SAS_BROADCAST_PRIMITIVE:
6306 _scsih_sas_broadcast_primative_event(ioc,
6307 fw_event);
6308 break;
6309 case MPI2_EVENT_SAS_ENCL_DEVICE_STATUS_CHANGE:
6310 _scsih_sas_enclosure_dev_status_change_event(ioc,
6311 fw_event);
6312 break;
6313 case MPI2_EVENT_IR_CONFIGURATION_CHANGE_LIST:
6314 _scsih_sas_ir_config_change_event(ioc, fw_event);
6315 break;
6316 case MPI2_EVENT_IR_VOLUME:
6317 _scsih_sas_ir_volume_event(ioc, fw_event);
6318 break;
6319 case MPI2_EVENT_IR_PHYSICAL_DISK:
6320 _scsih_sas_ir_physical_disk_event(ioc, fw_event);
6321 break;
6322 case MPI2_EVENT_IR_OPERATION_STATUS:
6323 _scsih_sas_ir_operation_status_event(ioc, fw_event);
6324 break;
6325 }
6326 _scsih_fw_event_free(ioc, fw_event);
6327 }
6328
6329 /**
6330 * mpt2sas_scsih_event_callback - firmware event handler (called at ISR time)
6331 * @ioc: per adapter object
6332 * @msix_index: MSIX table index supplied by the OS
6333 * @reply: reply message frame(lower 32bit addr)
6334 * Context: interrupt.
6335 *
6336 * This function merely adds a new work task into ioc->firmware_event_thread.
6337 * The tasks are worked from _firmware_event_work in user context.
6338 *
6339 * Return 1 meaning mf should be freed from _base_interrupt
6340 * 0 means the mf is freed from this function.
6341 */
6342 u8
6343 mpt2sas_scsih_event_callback(struct MPT2SAS_ADAPTER *ioc, u8 msix_index,
6344 u32 reply)
6345 {
6346 struct fw_event_work *fw_event;
6347 Mpi2EventNotificationReply_t *mpi_reply;
6348 u16 event;
6349 u16 sz;
6350
6351 /* events turned off due to host reset or driver unloading */
6352 if (ioc->remove_host || ioc->pci_error_recovery)
6353 return 1;
6354
6355 mpi_reply = mpt2sas_base_get_reply_virt_addr(ioc, reply);
6356 event = le16_to_cpu(mpi_reply->Event);
6357
6358 switch (event) {
6359 /* handle these */
6360 case MPI2_EVENT_SAS_BROADCAST_PRIMITIVE:
6361 {
6362 Mpi2EventDataSasBroadcastPrimitive_t *baen_data =
6363 (Mpi2EventDataSasBroadcastPrimitive_t *)
6364 mpi_reply->EventData;
6365
6366 if (baen_data->Primitive !=
6367 MPI2_EVENT_PRIMITIVE_ASYNCHRONOUS_EVENT ||
6368 ioc->broadcast_aen_busy)
6369 return 1;
6370 ioc->broadcast_aen_busy = 1;
6371 break;
6372 }
6373
6374 case MPI2_EVENT_SAS_TOPOLOGY_CHANGE_LIST:
6375 _scsih_check_topo_delete_events(ioc,
6376 (Mpi2EventDataSasTopologyChangeList_t *)
6377 mpi_reply->EventData);
6378 break;
6379 case MPI2_EVENT_IR_CONFIGURATION_CHANGE_LIST:
6380 _scsih_check_ir_config_unhide_events(ioc,
6381 (Mpi2EventDataIrConfigChangeList_t *)
6382 mpi_reply->EventData);
6383 break;
6384 case MPI2_EVENT_IR_VOLUME:
6385 _scsih_check_volume_delete_events(ioc,
6386 (Mpi2EventDataIrVolume_t *)
6387 mpi_reply->EventData);
6388 break;
6389 case MPI2_EVENT_SAS_DEVICE_STATUS_CHANGE:
6390 case MPI2_EVENT_IR_OPERATION_STATUS:
6391 case MPI2_EVENT_SAS_DISCOVERY:
6392 case MPI2_EVENT_SAS_ENCL_DEVICE_STATUS_CHANGE:
6393 case MPI2_EVENT_IR_PHYSICAL_DISK:
6394 break;
6395
6396 default: /* ignore the rest */
6397 return 1;
6398 }
6399
6400 fw_event = kzalloc(sizeof(struct fw_event_work), GFP_ATOMIC);
6401 if (!fw_event) {
6402 printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
6403 ioc->name, __FILE__, __LINE__, __func__);
6404 return 1;
6405 }
6406 sz = le16_to_cpu(mpi_reply->EventDataLength) * 4;
6407 fw_event->event_data = kzalloc(sz, GFP_ATOMIC);
6408 if (!fw_event->event_data) {
6409 printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
6410 ioc->name, __FILE__, __LINE__, __func__);
6411 kfree(fw_event);
6412 return 1;
6413 }
6414
6415 memcpy(fw_event->event_data, mpi_reply->EventData,
6416 sz);
6417 fw_event->ioc = ioc;
6418 fw_event->VF_ID = mpi_reply->VF_ID;
6419 fw_event->VP_ID = mpi_reply->VP_ID;
6420 fw_event->event = event;
6421 _scsih_fw_event_add(ioc, fw_event);
6422 return 1;
6423 }
6424
6425 /* shost template */
6426 static struct scsi_host_template scsih_driver_template = {
6427 .module = THIS_MODULE,
6428 .name = "Fusion MPT SAS Host",
6429 .proc_name = MPT2SAS_DRIVER_NAME,
6430 .queuecommand = _scsih_qcmd,
6431 .target_alloc = _scsih_target_alloc,
6432 .slave_alloc = _scsih_slave_alloc,
6433 .slave_configure = _scsih_slave_configure,
6434 .target_destroy = _scsih_target_destroy,
6435 .slave_destroy = _scsih_slave_destroy,
6436 .change_queue_depth = _scsih_change_queue_depth,
6437 .change_queue_type = _scsih_change_queue_type,
6438 .eh_abort_handler = _scsih_abort,
6439 .eh_device_reset_handler = _scsih_dev_reset,
6440 .eh_target_reset_handler = _scsih_target_reset,
6441 .eh_host_reset_handler = _scsih_host_reset,
6442 .bios_param = _scsih_bios_param,
6443 .can_queue = 1,
6444 .this_id = -1,
6445 .sg_tablesize = MPT2SAS_SG_DEPTH,
6446 .max_sectors = 8192,
6447 .cmd_per_lun = 7,
6448 .use_clustering = ENABLE_CLUSTERING,
6449 .shost_attrs = mpt2sas_host_attrs,
6450 .sdev_attrs = mpt2sas_dev_attrs,
6451 };
6452
6453 /**
6454 * _scsih_expander_node_remove - removing expander device from list.
6455 * @ioc: per adapter object
6456 * @sas_expander: the sas_device object
6457 * Context: Calling function should acquire ioc->sas_node_lock.
6458 *
6459 * Removing object and freeing associated memory from the
6460 * ioc->sas_expander_list.
6461 *
6462 * Return nothing.
6463 */
6464 static void
6465 _scsih_expander_node_remove(struct MPT2SAS_ADAPTER *ioc,
6466 struct _sas_node *sas_expander)
6467 {
6468 struct _sas_port *mpt2sas_port, *next;
6469
6470 /* remove sibling ports attached to this expander */
6471 list_for_each_entry_safe(mpt2sas_port, next,
6472 &sas_expander->sas_port_list, port_list) {
6473 if (ioc->shost_recovery)
6474 return;
6475 if (mpt2sas_port->remote_identify.device_type ==
6476 SAS_END_DEVICE)
6477 mpt2sas_device_remove(ioc,
6478 mpt2sas_port->remote_identify.sas_address);
6479 else if (mpt2sas_port->remote_identify.device_type ==
6480 SAS_EDGE_EXPANDER_DEVICE ||
6481 mpt2sas_port->remote_identify.device_type ==
6482 SAS_FANOUT_EXPANDER_DEVICE)
6483 mpt2sas_expander_remove(ioc,
6484 mpt2sas_port->remote_identify.sas_address);
6485 }
6486
6487 mpt2sas_transport_port_remove(ioc, sas_expander->sas_address,
6488 sas_expander->sas_address_parent);
6489
6490 printk(MPT2SAS_INFO_FMT "expander_remove: handle"
6491 "(0x%04x), sas_addr(0x%016llx)\n", ioc->name,
6492 sas_expander->handle, (unsigned long long)
6493 sas_expander->sas_address);
6494
6495 kfree(sas_expander->phy);
6496 kfree(sas_expander);
6497 }
6498
6499 /**
6500 * _scsih_ir_shutdown - IR shutdown notification
6501 * @ioc: per adapter object
6502 *
6503 * Sending RAID Action to alert the Integrated RAID subsystem of the IOC that
6504 * the host system is shutting down.
6505 *
6506 * Return nothing.
6507 */
6508 static void
6509 _scsih_ir_shutdown(struct MPT2SAS_ADAPTER *ioc)
6510 {
6511 Mpi2RaidActionRequest_t *mpi_request;
6512 Mpi2RaidActionReply_t *mpi_reply;
6513 u16 smid;
6514
6515 /* is IR firmware build loaded ? */
6516 if (!ioc->ir_firmware)
6517 return;
6518
6519 /* are there any volumes ? */
6520 if (list_empty(&ioc->raid_device_list))
6521 return;
6522
6523 mutex_lock(&ioc->scsih_cmds.mutex);
6524
6525 if (ioc->scsih_cmds.status != MPT2_CMD_NOT_USED) {
6526 printk(MPT2SAS_ERR_FMT "%s: scsih_cmd in use\n",
6527 ioc->name, __func__);
6528 goto out;
6529 }
6530 ioc->scsih_cmds.status = MPT2_CMD_PENDING;
6531
6532 smid = mpt2sas_base_get_smid(ioc, ioc->scsih_cb_idx);
6533 if (!smid) {
6534 printk(MPT2SAS_ERR_FMT "%s: failed obtaining a smid\n",
6535 ioc->name, __func__);
6536 ioc->scsih_cmds.status = MPT2_CMD_NOT_USED;
6537 goto out;
6538 }
6539
6540 mpi_request = mpt2sas_base_get_msg_frame(ioc, smid);
6541 ioc->scsih_cmds.smid = smid;
6542 memset(mpi_request, 0, sizeof(Mpi2RaidActionRequest_t));
6543
6544 mpi_request->Function = MPI2_FUNCTION_RAID_ACTION;
6545 mpi_request->Action = MPI2_RAID_ACTION_SYSTEM_SHUTDOWN_INITIATED;
6546
6547 printk(MPT2SAS_INFO_FMT "IR shutdown (sending)\n", ioc->name);
6548 init_completion(&ioc->scsih_cmds.done);
6549 mpt2sas_base_put_smid_default(ioc, smid);
6550 wait_for_completion_timeout(&ioc->scsih_cmds.done, 10*HZ);
6551
6552 if (!(ioc->scsih_cmds.status & MPT2_CMD_COMPLETE)) {
6553 printk(MPT2SAS_ERR_FMT "%s: timeout\n",
6554 ioc->name, __func__);
6555 goto out;
6556 }
6557
6558 if (ioc->scsih_cmds.status & MPT2_CMD_REPLY_VALID) {
6559 mpi_reply = ioc->scsih_cmds.reply;
6560
6561 printk(MPT2SAS_INFO_FMT "IR shutdown (complete): "
6562 "ioc_status(0x%04x), loginfo(0x%08x)\n",
6563 ioc->name, le16_to_cpu(mpi_reply->IOCStatus),
6564 le32_to_cpu(mpi_reply->IOCLogInfo));
6565 }
6566
6567 out:
6568 ioc->scsih_cmds.status = MPT2_CMD_NOT_USED;
6569 mutex_unlock(&ioc->scsih_cmds.mutex);
6570 }
6571
6572 /**
6573 * _scsih_shutdown - routine call during system shutdown
6574 * @pdev: PCI device struct
6575 *
6576 * Return nothing.
6577 */
6578 static void
6579 _scsih_shutdown(struct pci_dev *pdev)
6580 {
6581 struct Scsi_Host *shost = pci_get_drvdata(pdev);
6582 struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
6583 struct workqueue_struct *wq;
6584 unsigned long flags;
6585
6586 ioc->remove_host = 1;
6587 _scsih_fw_event_cleanup_queue(ioc);
6588
6589 spin_lock_irqsave(&ioc->fw_event_lock, flags);
6590 wq = ioc->firmware_event_thread;
6591 ioc->firmware_event_thread = NULL;
6592 spin_unlock_irqrestore(&ioc->fw_event_lock, flags);
6593 if (wq)
6594 destroy_workqueue(wq);
6595
6596 _scsih_ir_shutdown(ioc);
6597 mpt2sas_base_detach(ioc);
6598 }
6599
6600 /**
6601 * _scsih_remove - detach and remove add host
6602 * @pdev: PCI device struct
6603 *
6604 * Routine called when unloading the driver.
6605 * Return nothing.
6606 */
6607 static void __devexit
6608 _scsih_remove(struct pci_dev *pdev)
6609 {
6610 struct Scsi_Host *shost = pci_get_drvdata(pdev);
6611 struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
6612 struct _sas_port *mpt2sas_port, *next_port;
6613 struct _raid_device *raid_device, *next;
6614 struct MPT2SAS_TARGET *sas_target_priv_data;
6615 struct workqueue_struct *wq;
6616 unsigned long flags;
6617
6618 ioc->remove_host = 1;
6619 _scsih_fw_event_cleanup_queue(ioc);
6620
6621 spin_lock_irqsave(&ioc->fw_event_lock, flags);
6622 wq = ioc->firmware_event_thread;
6623 ioc->firmware_event_thread = NULL;
6624 spin_unlock_irqrestore(&ioc->fw_event_lock, flags);
6625 if (wq)
6626 destroy_workqueue(wq);
6627
6628 /* release all the volumes */
6629 list_for_each_entry_safe(raid_device, next, &ioc->raid_device_list,
6630 list) {
6631 if (raid_device->starget) {
6632 sas_target_priv_data =
6633 raid_device->starget->hostdata;
6634 sas_target_priv_data->deleted = 1;
6635 scsi_remove_target(&raid_device->starget->dev);
6636 }
6637 printk(MPT2SAS_INFO_FMT "removing handle(0x%04x), wwid"
6638 "(0x%016llx)\n", ioc->name, raid_device->handle,
6639 (unsigned long long) raid_device->wwid);
6640 _scsih_raid_device_remove(ioc, raid_device);
6641 }
6642
6643 /* free ports attached to the sas_host */
6644 list_for_each_entry_safe(mpt2sas_port, next_port,
6645 &ioc->sas_hba.sas_port_list, port_list) {
6646 if (mpt2sas_port->remote_identify.device_type ==
6647 SAS_END_DEVICE)
6648 mpt2sas_device_remove(ioc,
6649 mpt2sas_port->remote_identify.sas_address);
6650 else if (mpt2sas_port->remote_identify.device_type ==
6651 SAS_EDGE_EXPANDER_DEVICE ||
6652 mpt2sas_port->remote_identify.device_type ==
6653 SAS_FANOUT_EXPANDER_DEVICE)
6654 mpt2sas_expander_remove(ioc,
6655 mpt2sas_port->remote_identify.sas_address);
6656 }
6657
6658 /* free phys attached to the sas_host */
6659 if (ioc->sas_hba.num_phys) {
6660 kfree(ioc->sas_hba.phy);
6661 ioc->sas_hba.phy = NULL;
6662 ioc->sas_hba.num_phys = 0;
6663 }
6664
6665 sas_remove_host(shost);
6666 _scsih_shutdown(pdev);
6667 list_del(&ioc->list);
6668 scsi_remove_host(shost);
6669 scsi_host_put(shost);
6670 }
6671
6672 /**
6673 * _scsih_probe_boot_devices - reports 1st device
6674 * @ioc: per adapter object
6675 *
6676 * If specified in bios page 2, this routine reports the 1st
6677 * device scsi-ml or sas transport for persistent boot device
6678 * purposes. Please refer to function _scsih_determine_boot_device()
6679 */
6680 static void
6681 _scsih_probe_boot_devices(struct MPT2SAS_ADAPTER *ioc)
6682 {
6683 u8 is_raid;
6684 void *device;
6685 struct _sas_device *sas_device;
6686 struct _raid_device *raid_device;
6687 u16 handle;
6688 u64 sas_address_parent;
6689 u64 sas_address;
6690 unsigned long flags;
6691 int rc;
6692
6693 device = NULL;
6694 if (ioc->req_boot_device.device) {
6695 device = ioc->req_boot_device.device;
6696 is_raid = ioc->req_boot_device.is_raid;
6697 } else if (ioc->req_alt_boot_device.device) {
6698 device = ioc->req_alt_boot_device.device;
6699 is_raid = ioc->req_alt_boot_device.is_raid;
6700 } else if (ioc->current_boot_device.device) {
6701 device = ioc->current_boot_device.device;
6702 is_raid = ioc->current_boot_device.is_raid;
6703 }
6704
6705 if (!device)
6706 return;
6707
6708 if (is_raid) {
6709 raid_device = device;
6710 rc = scsi_add_device(ioc->shost, RAID_CHANNEL,
6711 raid_device->id, 0);
6712 if (rc)
6713 _scsih_raid_device_remove(ioc, raid_device);
6714 } else {
6715 sas_device = device;
6716 handle = sas_device->handle;
6717 sas_address_parent = sas_device->sas_address_parent;
6718 sas_address = sas_device->sas_address;
6719 spin_lock_irqsave(&ioc->sas_device_lock, flags);
6720 list_move_tail(&sas_device->list, &ioc->sas_device_list);
6721 spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
6722 if (!mpt2sas_transport_port_add(ioc, sas_device->handle,
6723 sas_device->sas_address_parent)) {
6724 _scsih_sas_device_remove(ioc, sas_device);
6725 } else if (!sas_device->starget) {
6726 mpt2sas_transport_port_remove(ioc, sas_address,
6727 sas_address_parent);
6728 _scsih_sas_device_remove(ioc, sas_device);
6729 }
6730 }
6731 }
6732
6733 /**
6734 * _scsih_probe_raid - reporting raid volumes to scsi-ml
6735 * @ioc: per adapter object
6736 *
6737 * Called during initial loading of the driver.
6738 */
6739 static void
6740 _scsih_probe_raid(struct MPT2SAS_ADAPTER *ioc)
6741 {
6742 struct _raid_device *raid_device, *raid_next;
6743 int rc;
6744
6745 list_for_each_entry_safe(raid_device, raid_next,
6746 &ioc->raid_device_list, list) {
6747 if (raid_device->starget)
6748 continue;
6749 rc = scsi_add_device(ioc->shost, RAID_CHANNEL,
6750 raid_device->id, 0);
6751 if (rc)
6752 _scsih_raid_device_remove(ioc, raid_device);
6753 }
6754 }
6755
6756 /**
6757 * _scsih_probe_sas - reporting sas devices to sas transport
6758 * @ioc: per adapter object
6759 *
6760 * Called during initial loading of the driver.
6761 */
6762 static void
6763 _scsih_probe_sas(struct MPT2SAS_ADAPTER *ioc)
6764 {
6765 struct _sas_device *sas_device, *next;
6766 unsigned long flags;
6767
6768 /* SAS Device List */
6769 list_for_each_entry_safe(sas_device, next, &ioc->sas_device_init_list,
6770 list) {
6771 spin_lock_irqsave(&ioc->sas_device_lock, flags);
6772 list_move_tail(&sas_device->list, &ioc->sas_device_list);
6773 spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
6774
6775 if (!mpt2sas_transport_port_add(ioc, sas_device->handle,
6776 sas_device->sas_address_parent)) {
6777 _scsih_sas_device_remove(ioc, sas_device);
6778 } else if (!sas_device->starget) {
6779 mpt2sas_transport_port_remove(ioc,
6780 sas_device->sas_address,
6781 sas_device->sas_address_parent);
6782 _scsih_sas_device_remove(ioc, sas_device);
6783 }
6784 }
6785 }
6786
6787 /**
6788 * _scsih_probe_devices - probing for devices
6789 * @ioc: per adapter object
6790 *
6791 * Called during initial loading of the driver.
6792 */
6793 static void
6794 _scsih_probe_devices(struct MPT2SAS_ADAPTER *ioc)
6795 {
6796 u16 volume_mapping_flags =
6797 le16_to_cpu(ioc->ioc_pg8.IRVolumeMappingFlags) &
6798 MPI2_IOCPAGE8_IRFLAGS_MASK_VOLUME_MAPPING_MODE;
6799
6800 if (!(ioc->facts.ProtocolFlags & MPI2_IOCFACTS_PROTOCOL_SCSI_INITIATOR))
6801 return; /* return when IOC doesn't support initiator mode */
6802
6803 _scsih_probe_boot_devices(ioc);
6804
6805 if (ioc->ir_firmware) {
6806 if ((volume_mapping_flags &
6807 MPI2_IOCPAGE8_IRFLAGS_HIGH_VOLUME_MAPPING)) {
6808 _scsih_probe_sas(ioc);
6809 _scsih_probe_raid(ioc);
6810 } else {
6811 _scsih_probe_raid(ioc);
6812 _scsih_probe_sas(ioc);
6813 }
6814 } else
6815 _scsih_probe_sas(ioc);
6816 }
6817
6818 /**
6819 * _scsih_probe - attach and add scsi host
6820 * @pdev: PCI device struct
6821 * @id: pci device id
6822 *
6823 * Returns 0 success, anything else error.
6824 */
6825 static int
6826 _scsih_probe(struct pci_dev *pdev, const struct pci_device_id *id)
6827 {
6828 struct MPT2SAS_ADAPTER *ioc;
6829 struct Scsi_Host *shost;
6830
6831 shost = scsi_host_alloc(&scsih_driver_template,
6832 sizeof(struct MPT2SAS_ADAPTER));
6833 if (!shost)
6834 return -ENODEV;
6835
6836 /* init local params */
6837 ioc = shost_priv(shost);
6838 memset(ioc, 0, sizeof(struct MPT2SAS_ADAPTER));
6839 INIT_LIST_HEAD(&ioc->list);
6840 list_add_tail(&ioc->list, &mpt2sas_ioc_list);
6841 ioc->shost = shost;
6842 ioc->id = mpt_ids++;
6843 sprintf(ioc->name, "%s%d", MPT2SAS_DRIVER_NAME, ioc->id);
6844 ioc->pdev = pdev;
6845 ioc->scsi_io_cb_idx = scsi_io_cb_idx;
6846 ioc->tm_cb_idx = tm_cb_idx;
6847 ioc->ctl_cb_idx = ctl_cb_idx;
6848 ioc->base_cb_idx = base_cb_idx;
6849 ioc->transport_cb_idx = transport_cb_idx;
6850 ioc->scsih_cb_idx = scsih_cb_idx;
6851 ioc->config_cb_idx = config_cb_idx;
6852 ioc->tm_tr_cb_idx = tm_tr_cb_idx;
6853 ioc->tm_tr_volume_cb_idx = tm_tr_volume_cb_idx;
6854 ioc->tm_sas_control_cb_idx = tm_sas_control_cb_idx;
6855 ioc->logging_level = logging_level;
6856 /* misc semaphores and spin locks */
6857 mutex_init(&ioc->reset_in_progress_mutex);
6858 spin_lock_init(&ioc->ioc_reset_in_progress_lock);
6859 spin_lock_init(&ioc->scsi_lookup_lock);
6860 spin_lock_init(&ioc->sas_device_lock);
6861 spin_lock_init(&ioc->sas_node_lock);
6862 spin_lock_init(&ioc->fw_event_lock);
6863 spin_lock_init(&ioc->raid_device_lock);
6864
6865 INIT_LIST_HEAD(&ioc->sas_device_list);
6866 INIT_LIST_HEAD(&ioc->sas_device_init_list);
6867 INIT_LIST_HEAD(&ioc->sas_expander_list);
6868 INIT_LIST_HEAD(&ioc->fw_event_list);
6869 INIT_LIST_HEAD(&ioc->raid_device_list);
6870 INIT_LIST_HEAD(&ioc->sas_hba.sas_port_list);
6871 INIT_LIST_HEAD(&ioc->delayed_tr_list);
6872 INIT_LIST_HEAD(&ioc->delayed_tr_volume_list);
6873
6874 /* init shost parameters */
6875 shost->max_cmd_len = 32;
6876 shost->max_lun = max_lun;
6877 shost->transportt = mpt2sas_transport_template;
6878 shost->unique_id = ioc->id;
6879
6880 if ((scsi_add_host(shost, &pdev->dev))) {
6881 printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
6882 ioc->name, __FILE__, __LINE__, __func__);
6883 list_del(&ioc->list);
6884 goto out_add_shost_fail;
6885 }
6886
6887 scsi_host_set_prot(shost, SHOST_DIF_TYPE1_PROTECTION
6888 | SHOST_DIF_TYPE2_PROTECTION | SHOST_DIF_TYPE3_PROTECTION);
6889 scsi_host_set_guard(shost, SHOST_DIX_GUARD_CRC);
6890
6891 /* event thread */
6892 snprintf(ioc->firmware_event_name, sizeof(ioc->firmware_event_name),
6893 "fw_event%d", ioc->id);
6894 ioc->firmware_event_thread = create_singlethread_workqueue(
6895 ioc->firmware_event_name);
6896 if (!ioc->firmware_event_thread) {
6897 printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
6898 ioc->name, __FILE__, __LINE__, __func__);
6899 goto out_thread_fail;
6900 }
6901
6902 ioc->wait_for_port_enable_to_complete = 1;
6903 if ((mpt2sas_base_attach(ioc))) {
6904 printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
6905 ioc->name, __FILE__, __LINE__, __func__);
6906 goto out_attach_fail;
6907 }
6908
6909 ioc->wait_for_port_enable_to_complete = 0;
6910 _scsih_probe_devices(ioc);
6911 return 0;
6912
6913 out_attach_fail:
6914 destroy_workqueue(ioc->firmware_event_thread);
6915 out_thread_fail:
6916 list_del(&ioc->list);
6917 scsi_remove_host(shost);
6918 out_add_shost_fail:
6919 return -ENODEV;
6920 }
6921
6922 #ifdef CONFIG_PM
6923 /**
6924 * _scsih_suspend - power management suspend main entry point
6925 * @pdev: PCI device struct
6926 * @state: PM state change to (usually PCI_D3)
6927 *
6928 * Returns 0 success, anything else error.
6929 */
6930 static int
6931 _scsih_suspend(struct pci_dev *pdev, pm_message_t state)
6932 {
6933 struct Scsi_Host *shost = pci_get_drvdata(pdev);
6934 struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
6935 u32 device_state;
6936
6937 mpt2sas_base_stop_watchdog(ioc);
6938 flush_scheduled_work();
6939 scsi_block_requests(shost);
6940 device_state = pci_choose_state(pdev, state);
6941 printk(MPT2SAS_INFO_FMT "pdev=0x%p, slot=%s, entering "
6942 "operating state [D%d]\n", ioc->name, pdev,
6943 pci_name(pdev), device_state);
6944
6945 mpt2sas_base_free_resources(ioc);
6946 pci_save_state(pdev);
6947 pci_disable_device(pdev);
6948 pci_set_power_state(pdev, device_state);
6949 return 0;
6950 }
6951
6952 /**
6953 * _scsih_resume - power management resume main entry point
6954 * @pdev: PCI device struct
6955 *
6956 * Returns 0 success, anything else error.
6957 */
6958 static int
6959 _scsih_resume(struct pci_dev *pdev)
6960 {
6961 struct Scsi_Host *shost = pci_get_drvdata(pdev);
6962 struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
6963 u32 device_state = pdev->current_state;
6964 int r;
6965
6966 printk(MPT2SAS_INFO_FMT "pdev=0x%p, slot=%s, previous "
6967 "operating state [D%d]\n", ioc->name, pdev,
6968 pci_name(pdev), device_state);
6969
6970 pci_set_power_state(pdev, PCI_D0);
6971 pci_enable_wake(pdev, PCI_D0, 0);
6972 pci_restore_state(pdev);
6973 ioc->pdev = pdev;
6974 r = mpt2sas_base_map_resources(ioc);
6975 if (r)
6976 return r;
6977
6978 mpt2sas_base_hard_reset_handler(ioc, CAN_SLEEP, SOFT_RESET);
6979 scsi_unblock_requests(shost);
6980 mpt2sas_base_start_watchdog(ioc);
6981 return 0;
6982 }
6983 #endif /* CONFIG_PM */
6984
6985 /**
6986 * _scsih_pci_error_detected - Called when a PCI error is detected.
6987 * @pdev: PCI device struct
6988 * @state: PCI channel state
6989 *
6990 * Description: Called when a PCI error is detected.
6991 *
6992 * Return value:
6993 * PCI_ERS_RESULT_NEED_RESET or PCI_ERS_RESULT_DISCONNECT
6994 */
6995 static pci_ers_result_t
6996 _scsih_pci_error_detected(struct pci_dev *pdev, pci_channel_state_t state)
6997 {
6998 struct Scsi_Host *shost = pci_get_drvdata(pdev);
6999 struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
7000
7001 printk(MPT2SAS_INFO_FMT "PCI error: detected callback, state(%d)!!\n",
7002 ioc->name, state);
7003
7004 switch (state) {
7005 case pci_channel_io_normal:
7006 return PCI_ERS_RESULT_CAN_RECOVER;
7007 case pci_channel_io_frozen:
7008 /* Fatal error, prepare for slot reset */
7009 ioc->pci_error_recovery = 1;
7010 scsi_block_requests(ioc->shost);
7011 mpt2sas_base_stop_watchdog(ioc);
7012 mpt2sas_base_free_resources(ioc);
7013 return PCI_ERS_RESULT_NEED_RESET;
7014 case pci_channel_io_perm_failure:
7015 /* Permanent error, prepare for device removal */
7016 ioc->pci_error_recovery = 1;
7017 mpt2sas_base_stop_watchdog(ioc);
7018 _scsih_flush_running_cmds(ioc);
7019 return PCI_ERS_RESULT_DISCONNECT;
7020 }
7021 return PCI_ERS_RESULT_NEED_RESET;
7022 }
7023
7024 /**
7025 * _scsih_pci_slot_reset - Called when PCI slot has been reset.
7026 * @pdev: PCI device struct
7027 *
7028 * Description: This routine is called by the pci error recovery
7029 * code after the PCI slot has been reset, just before we
7030 * should resume normal operations.
7031 */
7032 static pci_ers_result_t
7033 _scsih_pci_slot_reset(struct pci_dev *pdev)
7034 {
7035 struct Scsi_Host *shost = pci_get_drvdata(pdev);
7036 struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
7037 int rc;
7038
7039 printk(MPT2SAS_INFO_FMT "PCI error: slot reset callback!!\n",
7040 ioc->name);
7041
7042 ioc->pci_error_recovery = 0;
7043 ioc->pdev = pdev;
7044 pci_restore_state(pdev);
7045 rc = mpt2sas_base_map_resources(ioc);
7046 if (rc)
7047 return PCI_ERS_RESULT_DISCONNECT;
7048
7049
7050 rc = mpt2sas_base_hard_reset_handler(ioc, CAN_SLEEP,
7051 FORCE_BIG_HAMMER);
7052
7053 printk(MPT2SAS_WARN_FMT "hard reset: %s\n", ioc->name,
7054 (rc == 0) ? "success" : "failed");
7055
7056 if (!rc)
7057 return PCI_ERS_RESULT_RECOVERED;
7058 else
7059 return PCI_ERS_RESULT_DISCONNECT;
7060 }
7061
7062 /**
7063 * _scsih_pci_resume() - resume normal ops after PCI reset
7064 * @pdev: pointer to PCI device
7065 *
7066 * Called when the error recovery driver tells us that its
7067 * OK to resume normal operation. Use completion to allow
7068 * halted scsi ops to resume.
7069 */
7070 static void
7071 _scsih_pci_resume(struct pci_dev *pdev)
7072 {
7073 struct Scsi_Host *shost = pci_get_drvdata(pdev);
7074 struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
7075
7076 printk(MPT2SAS_INFO_FMT "PCI error: resume callback!!\n", ioc->name);
7077
7078 pci_cleanup_aer_uncorrect_error_status(pdev);
7079 mpt2sas_base_start_watchdog(ioc);
7080 scsi_unblock_requests(ioc->shost);
7081 }
7082
7083 /**
7084 * _scsih_pci_mmio_enabled - Enable MMIO and dump debug registers
7085 * @pdev: pointer to PCI device
7086 */
7087 static pci_ers_result_t
7088 _scsih_pci_mmio_enabled(struct pci_dev *pdev)
7089 {
7090 struct Scsi_Host *shost = pci_get_drvdata(pdev);
7091 struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
7092
7093 printk(MPT2SAS_INFO_FMT "PCI error: mmio enabled callback!!\n",
7094 ioc->name);
7095
7096 /* TODO - dump whatever for debugging purposes */
7097
7098 /* Request a slot reset. */
7099 return PCI_ERS_RESULT_NEED_RESET;
7100 }
7101
7102 static struct pci_error_handlers _scsih_err_handler = {
7103 .error_detected = _scsih_pci_error_detected,
7104 .mmio_enabled = _scsih_pci_mmio_enabled,
7105 .slot_reset = _scsih_pci_slot_reset,
7106 .resume = _scsih_pci_resume,
7107 };
7108
7109 static struct pci_driver scsih_driver = {
7110 .name = MPT2SAS_DRIVER_NAME,
7111 .id_table = scsih_pci_table,
7112 .probe = _scsih_probe,
7113 .remove = __devexit_p(_scsih_remove),
7114 .shutdown = _scsih_shutdown,
7115 .err_handler = &_scsih_err_handler,
7116 #ifdef CONFIG_PM
7117 .suspend = _scsih_suspend,
7118 .resume = _scsih_resume,
7119 #endif
7120 };
7121
7122 /* raid transport support */
7123 static struct raid_function_template mpt2sas_raid_functions = {
7124 .cookie = &scsih_driver_template,
7125 .is_raid = _scsih_is_raid,
7126 .get_resync = _scsih_get_resync,
7127 .get_state = _scsih_get_state,
7128 };
7129
7130 /**
7131 * _scsih_init - main entry point for this driver.
7132 *
7133 * Returns 0 success, anything else error.
7134 */
7135 static int __init
7136 _scsih_init(void)
7137 {
7138 int error;
7139
7140 mpt_ids = 0;
7141 printk(KERN_INFO "%s version %s loaded\n", MPT2SAS_DRIVER_NAME,
7142 MPT2SAS_DRIVER_VERSION);
7143
7144 mpt2sas_transport_template =
7145 sas_attach_transport(&mpt2sas_transport_functions);
7146 if (!mpt2sas_transport_template)
7147 return -ENODEV;
7148 /* raid transport support */
7149 mpt2sas_raid_template = raid_class_attach(&mpt2sas_raid_functions);
7150 if (!mpt2sas_raid_template) {
7151 sas_release_transport(mpt2sas_transport_template);
7152 return -ENODEV;
7153 }
7154
7155 mpt2sas_base_initialize_callback_handler();
7156
7157 /* queuecommand callback hander */
7158 scsi_io_cb_idx = mpt2sas_base_register_callback_handler(_scsih_io_done);
7159
7160 /* task management callback handler */
7161 tm_cb_idx = mpt2sas_base_register_callback_handler(_scsih_tm_done);
7162
7163 /* base internal commands callback handler */
7164 base_cb_idx = mpt2sas_base_register_callback_handler(mpt2sas_base_done);
7165
7166 /* transport internal commands callback handler */
7167 transport_cb_idx = mpt2sas_base_register_callback_handler(
7168 mpt2sas_transport_done);
7169
7170 /* scsih internal commands callback handler */
7171 scsih_cb_idx = mpt2sas_base_register_callback_handler(_scsih_done);
7172
7173 /* configuration page API internal commands callback handler */
7174 config_cb_idx = mpt2sas_base_register_callback_handler(
7175 mpt2sas_config_done);
7176
7177 /* ctl module callback handler */
7178 ctl_cb_idx = mpt2sas_base_register_callback_handler(mpt2sas_ctl_done);
7179
7180 tm_tr_cb_idx = mpt2sas_base_register_callback_handler(
7181 _scsih_tm_tr_complete);
7182
7183 tm_tr_volume_cb_idx = mpt2sas_base_register_callback_handler(
7184 _scsih_tm_volume_tr_complete);
7185
7186 tm_sas_control_cb_idx = mpt2sas_base_register_callback_handler(
7187 _scsih_sas_control_complete);
7188
7189 mpt2sas_ctl_init();
7190
7191 error = pci_register_driver(&scsih_driver);
7192 if (error) {
7193 /* raid transport support */
7194 raid_class_release(mpt2sas_raid_template);
7195 sas_release_transport(mpt2sas_transport_template);
7196 }
7197
7198 return error;
7199 }
7200
7201 /**
7202 * _scsih_exit - exit point for this driver (when it is a module).
7203 *
7204 * Returns 0 success, anything else error.
7205 */
7206 static void __exit
7207 _scsih_exit(void)
7208 {
7209 printk(KERN_INFO "mpt2sas version %s unloading\n",
7210 MPT2SAS_DRIVER_VERSION);
7211
7212 pci_unregister_driver(&scsih_driver);
7213
7214 mpt2sas_ctl_exit();
7215
7216 mpt2sas_base_release_callback_handler(scsi_io_cb_idx);
7217 mpt2sas_base_release_callback_handler(tm_cb_idx);
7218 mpt2sas_base_release_callback_handler(base_cb_idx);
7219 mpt2sas_base_release_callback_handler(transport_cb_idx);
7220 mpt2sas_base_release_callback_handler(scsih_cb_idx);
7221 mpt2sas_base_release_callback_handler(config_cb_idx);
7222 mpt2sas_base_release_callback_handler(ctl_cb_idx);
7223
7224 mpt2sas_base_release_callback_handler(tm_tr_cb_idx);
7225 mpt2sas_base_release_callback_handler(tm_tr_volume_cb_idx);
7226 mpt2sas_base_release_callback_handler(tm_sas_control_cb_idx);
7227
7228 /* raid transport support */
7229 raid_class_release(mpt2sas_raid_template);
7230 sas_release_transport(mpt2sas_transport_template);
7231
7232 }
7233
7234 module_init(_scsih_init);
7235 module_exit(_scsih_exit);
Linux kernel - Deliverables
This page took 0.27288 seconds and 5 git commands to generate.