drivers/scsi/qla2xxx/qla_inline.h

   1 /*
   2  *                  QLOGIC LINUX SOFTWARE
   3  *
   4  * QLogic ISP2x00 device driver for Linux 2.6.x
   5  * Copyright (C) 2003-2004 QLogic Corporation
   6  * (www.qlogic.com)
   7  *
   8  * This program is free software; you can redistribute it and/or modify it
   9  * under the terms of the GNU General Public License as published by the
  10  * Free Software Foundation; either version 2, or (at your option) any
  11  * later version.
  12  *
  13  * This program is distributed in the hope that it will be useful, but
  14  * WITHOUT ANY WARRANTY; without even the implied warranty of
  15  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  16  * General Public License for more details.
  17  *
  18  */
  19
  20
  21 static __inline__ uint16_t qla2x00_debounce_register(volatile uint16_t __iomem *);
  22 /*
  23  * qla2x00_debounce_register
  24  *      Debounce register.
  25  *
  26  * Input:
  27  *      port = register address.
  28  *
  29  * Returns:
  30  *      register value.
  31  */
  32 static __inline__ uint16_t
  33 qla2x00_debounce_register(volatile uint16_t __iomem *addr)
  34 {
  35         volatile uint16_t first;
  36         volatile uint16_t second;
  37
  38         do {
  39                 first = RD_REG_WORD(addr);
  40                 barrier();
  41                 cpu_relax();
  42                 second = RD_REG_WORD(addr);
  43         } while (first != second);
  44
  45         return (first);
  46 }
  47
  48 static __inline__ int qla2x00_normalize_dma_addr(
  49     dma_addr_t *e_addr,  uint32_t *e_len,
  50     dma_addr_t *ne_addr, uint32_t *ne_len);
  51
  52 /**
  53  * qla2x00_normalize_dma_addr() - Normalize an DMA address.
  54  * @e_addr: Raw DMA address
  55  * @e_len: Raw DMA length
  56  * @ne_addr: Normalized second DMA address
  57  * @ne_len: Normalized second DMA length
  58  *
  59  * If the address does not span a 4GB page boundary, the contents of @ne_addr
  60  * and @ne_len are undefined.  @e_len is updated to reflect a normalization.
  61  *
  62  * Example:
  63  *
  64  *      ffffabc0ffffeeee        (e_addr) start of DMA address
  65  *      0000000020000000        (e_len)  length of DMA transfer
  66  *      ffffabc11fffeeed        end of DMA transfer
  67  *
  68  * Is the 4GB boundary crossed?
  69  *
  70  *      ffffabc0ffffeeee        (e_addr)
  71  *      ffffabc11fffeeed        (e_addr + e_len - 1)
  72  *      00000001e0000003        ((e_addr ^ (e_addr + e_len - 1))
  73  *      0000000100000000        ((e_addr ^ (e_addr + e_len - 1)) & ~(0xffffffff)
  74  *
  75  * Compute start of second DMA segment:
  76  *
  77  *      ffffabc0ffffeeee        (e_addr)
  78  *      ffffabc1ffffeeee        (0x100000000 + e_addr)
  79  *      ffffabc100000000        (0x100000000 + e_addr) & ~(0xffffffff)
  80  *      ffffabc100000000        (ne_addr)
  81  *
  82  * Compute length of second DMA segment:
  83  *
  84  *      00000000ffffeeee        (e_addr & 0xffffffff)
  85  *      0000000000001112        (0x100000000 - (e_addr & 0xffffffff))
  86  *      000000001fffeeee        (e_len - (0x100000000 - (e_addr & 0xffffffff))
  87  *      000000001fffeeee        (ne_len)
  88  *
  89  * Adjust length of first DMA segment
  90  *
  91  *      0000000020000000        (e_len)
  92  *      0000000000001112        (e_len - ne_len)
  93  *      0000000000001112        (e_len)
  94  *
  95  * Returns non-zero if the specified address was normalized, else zero.
  96  */
  97 static __inline__ int
  98 qla2x00_normalize_dma_addr(
  99     dma_addr_t *e_addr,  uint32_t *e_len,
 100     dma_addr_t *ne_addr, uint32_t *ne_len)
 101 {
 102         int normalized;
 103
 104         normalized = 0;
 105         if ((*e_addr ^ (*e_addr + *e_len - 1)) & ~(0xFFFFFFFFULL)) {
 106                 /* Compute normalized crossed address and len */
 107                 *ne_addr = (0x100000000ULL + *e_addr) & ~(0xFFFFFFFFULL);
 108                 *ne_len = *e_len - (0x100000000ULL - (*e_addr & 0xFFFFFFFFULL));
 109                 *e_len -= *ne_len;
 110
 111                 normalized++;
 112         }
 113         return (normalized);
 114 }
 115
 116 static __inline__ void qla2x00_poll(scsi_qla_host_t *);
 117 static inline void
 118 qla2x00_poll(scsi_qla_host_t *ha)
 119 {
 120         if (IS_QLA2100(ha) || IS_QLA2200(ha))
 121                 qla2100_intr_handler(0, ha, NULL);
 122         else
 123                 qla2300_intr_handler(0, ha, NULL);
 124 }
 125
 126
 127 static __inline__ void qla2x00_enable_intrs(scsi_qla_host_t *);
 128 static __inline__ void qla2x00_disable_intrs(scsi_qla_host_t *);
 129
 130 static inline void
 131 qla2x00_enable_intrs(scsi_qla_host_t *ha)
 132 {
 133         unsigned long flags = 0;
 134         device_reg_t __iomem *reg = ha->iobase;
 135
 136         spin_lock_irqsave(&ha->hardware_lock, flags);
 137         ha->interrupts_on = 1;
 138         /* enable risc and host interrupts */
 139         WRT_REG_WORD(&reg->ictrl, ICR_EN_INT | ICR_EN_RISC);
 140         RD_REG_WORD(&reg->ictrl);
 141         spin_unlock_irqrestore(&ha->hardware_lock, flags);
 142
 143 }
 144
 145 static inline void
 146 qla2x00_disable_intrs(scsi_qla_host_t *ha)
 147 {
 148         unsigned long flags = 0;
 149         device_reg_t __iomem *reg = ha->iobase;
 150
 151         spin_lock_irqsave(&ha->hardware_lock, flags);
 152         ha->interrupts_on = 0;
 153         /* disable risc and host interrupts */
 154         WRT_REG_WORD(&reg->ictrl, 0);
 155         RD_REG_WORD(&reg->ictrl);
 156         spin_unlock_irqrestore(&ha->hardware_lock, flags);
 157 }
 158
 159
 160 static __inline__ int qla2x00_is_wwn_zero(uint8_t *);
 161
 162 /*
 163  * qla2x00_is_wwn_zero - Check for zero node name
 164  *
 165  * Input:
 166  *      wwn = Pointer to WW name to check
 167  *
 168  * Returns:
 169  *      1 if name is 0x00 else 0
 170  *
 171  * Context:
 172  *      Kernel context.
 173  */
 174 static __inline__ int
 175 qla2x00_is_wwn_zero(uint8_t *wwn)
 176 {
 177         int cnt;
 178
 179         for (cnt = 0; cnt < WWN_SIZE ; cnt++, wwn++) {
 180                 if (*wwn != 0)
 181                         break;
 182         }
 183         /* if zero return 1 */
 184         if (cnt == WWN_SIZE)
 185                 return (1);
 186         else
 187                 return (0);
 188 }
 189
 190 static __inline__ void qla2x00_check_fabric_devices(scsi_qla_host_t *);
 191 /*
 192  * This routine will wait for fabric devices for
 193  * the reset delay.
 194  */
 195 static __inline__ void qla2x00_check_fabric_devices(scsi_qla_host_t *ha)
 196 {
 197         uint16_t        fw_state;
 198
 199         qla2x00_get_firmware_state(ha, &fw_state);
 200 }
 201
 202 /**
 203  * qla2x00_issue_marker() - Issue a Marker IOCB if necessary.
 204  * @ha: HA context
 205  * @ha_locked: is function called with the hardware lock
 206  *
 207  * Returns non-zero if a failure occured, else zero.
 208  */
 209 static inline int
 210 qla2x00_issue_marker(scsi_qla_host_t *ha, int ha_locked)
 211 {
 212         /* Send marker if required */
 213         if (ha->marker_needed != 0) {
 214                 if (ha_locked) {
 215                         if (__qla2x00_marker(ha, 0, 0, MK_SYNC_ALL) !=
 216                             QLA_SUCCESS)
 217                                 return (QLA_FUNCTION_FAILED);
 218                 } else {
 219                         if (qla2x00_marker(ha, 0, 0, MK_SYNC_ALL) !=
 220                             QLA_SUCCESS)
 221                                 return (QLA_FUNCTION_FAILED);
 222                 }
 223                 ha->marker_needed = 0;
 224         }
 225         return (QLA_SUCCESS);
 226 }
 227
 228 static __inline__ void qla2x00_add_timer_to_cmd(srb_t *, int);
 229 static __inline__ void qla2x00_delete_timer_from_cmd(srb_t *);
 230
 231 /**************************************************************************
 232 *   qla2x00_add_timer_to_cmd
 233 *
 234 * Description:
 235 *       Creates a timer for the specified command. The timeout is usually
 236 *       the command time from kernel minus 2 secs.
 237 *
 238 * Input:
 239 *     sp - pointer to validate
 240 *
 241 * Returns:
 242 *     None.
 243 **************************************************************************/
 244 static inline void
 245 qla2x00_add_timer_to_cmd(srb_t *sp, int timeout)
 246 {
 247         init_timer(&sp->timer);
 248         sp->timer.expires = jiffies + timeout * HZ;
 249         sp->timer.data = (unsigned long) sp;
 250         sp->timer.function = (void (*) (unsigned long))qla2x00_cmd_timeout;
 251         add_timer(&sp->timer);
 252 }
 253
 254 /**************************************************************************
 255 *   qla2x00_delete_timer_from_cmd
 256 *
 257 * Description:
 258 *       Delete the timer for the specified command.
 259 *
 260 * Input:
 261 *     sp - pointer to validate
 262 *
 263 * Returns:
 264 *     None.
 265 **************************************************************************/
 266 static inline void
 267 qla2x00_delete_timer_from_cmd(srb_t *sp)
 268 {
 269         if (sp->timer.function != NULL) {
 270                 del_timer(&sp->timer);
 271                 sp->timer.function =  NULL;
 272                 sp->timer.data = (unsigned long) NULL;
 273         }
 274 }
 275