2 * scsi_lib.c Copyright (C) 1999 Eric Youngdale
4 * SCSI queueing library.
5 * Initial versions: Eric Youngdale (eric@andante.org).
6 * Based upon conversations with large numbers
7 * of people at Linux Expo.
10 #include <linux/bio.h>
11 #include <linux/bitops.h>
12 #include <linux/blkdev.h>
13 #include <linux/completion.h>
14 #include <linux/kernel.h>
15 #include <linux/export.h>
16 #include <linux/mempool.h>
17 #include <linux/slab.h>
18 #include <linux/init.h>
19 #include <linux/pci.h>
20 #include <linux/delay.h>
21 #include <linux/hardirq.h>
22 #include <linux/scatterlist.h>
24 #include <scsi/scsi.h>
25 #include <scsi/scsi_cmnd.h>
26 #include <scsi/scsi_dbg.h>
27 #include <scsi/scsi_device.h>
28 #include <scsi/scsi_driver.h>
29 #include <scsi/scsi_eh.h>
30 #include <scsi/scsi_host.h>
32 #include "scsi_priv.h"
33 #include "scsi_logging.h"
36 #define SG_MEMPOOL_NR ARRAY_SIZE(scsi_sg_pools)
37 #define SG_MEMPOOL_SIZE 2
39 struct scsi_host_sg_pool
{
42 struct kmem_cache
*slab
;
46 #define SP(x) { x, "sgpool-" __stringify(x) }
47 #if (SCSI_MAX_SG_SEGMENTS < 32)
48 #error SCSI_MAX_SG_SEGMENTS is too small (must be 32 or greater)
50 static struct scsi_host_sg_pool scsi_sg_pools
[] = {
53 #if (SCSI_MAX_SG_SEGMENTS > 32)
55 #if (SCSI_MAX_SG_SEGMENTS > 64)
57 #if (SCSI_MAX_SG_SEGMENTS > 128)
59 #if (SCSI_MAX_SG_SEGMENTS > 256)
60 #error SCSI_MAX_SG_SEGMENTS is too large (256 MAX)
65 SP(SCSI_MAX_SG_SEGMENTS
)
69 struct kmem_cache
*scsi_sdb_cache
;
72 * When to reinvoke queueing after a resource shortage. It's 3 msecs to
73 * not change behaviour from the previous unplug mechanism, experimentation
74 * may prove this needs changing.
76 #define SCSI_QUEUE_DELAY 3
79 * __scsi_queue_insert - private queue insertion
80 * @cmd: The SCSI command being requeued
81 * @reason: The reason for the requeue
82 * @unbusy: Whether the queue should be unbusied
84 * This is a private queue insertion. The public interface
85 * scsi_queue_insert() always assumes the queue should be unbusied
86 * because it's always called before the completion. This function is
87 * for a requeue after completion, which should only occur in this
90 static void __scsi_queue_insert(struct scsi_cmnd
*cmd
, int reason
, int unbusy
)
92 struct Scsi_Host
*host
= cmd
->device
->host
;
93 struct scsi_device
*device
= cmd
->device
;
94 struct scsi_target
*starget
= scsi_target(device
);
95 struct request_queue
*q
= device
->request_queue
;
99 printk("Inserting command %p into mlqueue\n", cmd
));
102 * Set the appropriate busy bit for the device/host.
104 * If the host/device isn't busy, assume that something actually
105 * completed, and that we should be able to queue a command now.
107 * Note that the prior mid-layer assumption that any host could
108 * always queue at least one command is now broken. The mid-layer
109 * will implement a user specifiable stall (see
110 * scsi_host.max_host_blocked and scsi_device.max_device_blocked)
111 * if a command is requeued with no other commands outstanding
112 * either for the device or for the host.
115 case SCSI_MLQUEUE_HOST_BUSY
:
116 host
->host_blocked
= host
->max_host_blocked
;
118 case SCSI_MLQUEUE_DEVICE_BUSY
:
119 case SCSI_MLQUEUE_EH_RETRY
:
120 device
->device_blocked
= device
->max_device_blocked
;
122 case SCSI_MLQUEUE_TARGET_BUSY
:
123 starget
->target_blocked
= starget
->max_target_blocked
;
128 * Decrement the counters, since these commands are no longer
129 * active on the host/device.
132 scsi_device_unbusy(device
);
135 * Requeue this command. It will go before all other commands
136 * that are already in the queue. Schedule requeue work under
137 * lock such that the kblockd_schedule_work() call happens
138 * before blk_cleanup_queue() finishes.
141 spin_lock_irqsave(q
->queue_lock
, flags
);
142 blk_requeue_request(q
, cmd
->request
);
143 kblockd_schedule_work(q
, &device
->requeue_work
);
144 spin_unlock_irqrestore(q
->queue_lock
, flags
);
148 * Function: scsi_queue_insert()
150 * Purpose: Insert a command in the midlevel queue.
152 * Arguments: cmd - command that we are adding to queue.
153 * reason - why we are inserting command to queue.
155 * Lock status: Assumed that lock is not held upon entry.
159 * Notes: We do this for one of two cases. Either the host is busy
160 * and it cannot accept any more commands for the time being,
161 * or the device returned QUEUE_FULL and can accept no more
163 * Notes: This could be called either from an interrupt context or a
164 * normal process context.
166 void scsi_queue_insert(struct scsi_cmnd
*cmd
, int reason
)
168 __scsi_queue_insert(cmd
, reason
, 1);
171 * scsi_execute - insert request and wait for the result
174 * @data_direction: data direction
175 * @buffer: data buffer
176 * @bufflen: len of buffer
177 * @sense: optional sense buffer
178 * @timeout: request timeout in seconds
179 * @retries: number of times to retry request
180 * @flags: or into request flags;
181 * @resid: optional residual length
183 * returns the req->errors value which is the scsi_cmnd result
186 int scsi_execute(struct scsi_device
*sdev
, const unsigned char *cmd
,
187 int data_direction
, void *buffer
, unsigned bufflen
,
188 unsigned char *sense
, int timeout
, int retries
, u64 flags
,
192 int write
= (data_direction
== DMA_TO_DEVICE
);
193 int ret
= DRIVER_ERROR
<< 24;
195 req
= blk_get_request(sdev
->request_queue
, write
, __GFP_WAIT
);
199 if (bufflen
&& blk_rq_map_kern(sdev
->request_queue
, req
,
200 buffer
, bufflen
, __GFP_WAIT
))
203 req
->cmd_len
= COMMAND_SIZE(cmd
[0]);
204 memcpy(req
->cmd
, cmd
, req
->cmd_len
);
207 req
->retries
= retries
;
208 req
->timeout
= timeout
;
209 req
->cmd_type
= REQ_TYPE_BLOCK_PC
;
210 req
->cmd_flags
|= flags
| REQ_QUIET
| REQ_PREEMPT
;
213 * head injection *required* here otherwise quiesce won't work
215 blk_execute_rq(req
->q
, NULL
, req
, 1);
218 * Some devices (USB mass-storage in particular) may transfer
219 * garbage data together with a residue indicating that the data
220 * is invalid. Prevent the garbage from being misinterpreted
221 * and prevent security leaks by zeroing out the excess data.
223 if (unlikely(req
->resid_len
> 0 && req
->resid_len
<= bufflen
))
224 memset(buffer
+ (bufflen
- req
->resid_len
), 0, req
->resid_len
);
227 *resid
= req
->resid_len
;
230 blk_put_request(req
);
234 EXPORT_SYMBOL(scsi_execute
);
236 int scsi_execute_req_flags(struct scsi_device
*sdev
, const unsigned char *cmd
,
237 int data_direction
, void *buffer
, unsigned bufflen
,
238 struct scsi_sense_hdr
*sshdr
, int timeout
, int retries
,
239 int *resid
, u64 flags
)
245 sense
= kzalloc(SCSI_SENSE_BUFFERSIZE
, GFP_NOIO
);
247 return DRIVER_ERROR
<< 24;
249 result
= scsi_execute(sdev
, cmd
, data_direction
, buffer
, bufflen
,
250 sense
, timeout
, retries
, flags
, resid
);
252 scsi_normalize_sense(sense
, SCSI_SENSE_BUFFERSIZE
, sshdr
);
257 EXPORT_SYMBOL(scsi_execute_req_flags
);
260 * Function: scsi_init_cmd_errh()
262 * Purpose: Initialize cmd fields related to error handling.
264 * Arguments: cmd - command that is ready to be queued.
266 * Notes: This function has the job of initializing a number of
267 * fields related to error handling. Typically this will
268 * be called once for each command, as required.
270 static void scsi_init_cmd_errh(struct scsi_cmnd
*cmd
)
272 cmd
->serial_number
= 0;
273 scsi_set_resid(cmd
, 0);
274 memset(cmd
->sense_buffer
, 0, SCSI_SENSE_BUFFERSIZE
);
275 if (cmd
->cmd_len
== 0)
276 cmd
->cmd_len
= scsi_command_size(cmd
->cmnd
);
279 void scsi_device_unbusy(struct scsi_device
*sdev
)
281 struct Scsi_Host
*shost
= sdev
->host
;
282 struct scsi_target
*starget
= scsi_target(sdev
);
285 spin_lock_irqsave(shost
->host_lock
, flags
);
287 starget
->target_busy
--;
288 if (unlikely(scsi_host_in_recovery(shost
) &&
289 (shost
->host_failed
|| shost
->host_eh_scheduled
)))
290 scsi_eh_wakeup(shost
);
291 spin_unlock(shost
->host_lock
);
292 spin_lock(sdev
->request_queue
->queue_lock
);
294 spin_unlock_irqrestore(sdev
->request_queue
->queue_lock
, flags
);
298 * Called for single_lun devices on IO completion. Clear starget_sdev_user,
299 * and call blk_run_queue for all the scsi_devices on the target -
300 * including current_sdev first.
302 * Called with *no* scsi locks held.
304 static void scsi_single_lun_run(struct scsi_device
*current_sdev
)
306 struct Scsi_Host
*shost
= current_sdev
->host
;
307 struct scsi_device
*sdev
, *tmp
;
308 struct scsi_target
*starget
= scsi_target(current_sdev
);
311 spin_lock_irqsave(shost
->host_lock
, flags
);
312 starget
->starget_sdev_user
= NULL
;
313 spin_unlock_irqrestore(shost
->host_lock
, flags
);
316 * Call blk_run_queue for all LUNs on the target, starting with
317 * current_sdev. We race with others (to set starget_sdev_user),
318 * but in most cases, we will be first. Ideally, each LU on the
319 * target would get some limited time or requests on the target.
321 blk_run_queue(current_sdev
->request_queue
);
323 spin_lock_irqsave(shost
->host_lock
, flags
);
324 if (starget
->starget_sdev_user
)
326 list_for_each_entry_safe(sdev
, tmp
, &starget
->devices
,
327 same_target_siblings
) {
328 if (sdev
== current_sdev
)
330 if (scsi_device_get(sdev
))
333 spin_unlock_irqrestore(shost
->host_lock
, flags
);
334 blk_run_queue(sdev
->request_queue
);
335 spin_lock_irqsave(shost
->host_lock
, flags
);
337 scsi_device_put(sdev
);
340 spin_unlock_irqrestore(shost
->host_lock
, flags
);
343 static inline int scsi_device_is_busy(struct scsi_device
*sdev
)
345 if (sdev
->device_busy
>= sdev
->queue_depth
|| sdev
->device_blocked
)
351 static inline int scsi_target_is_busy(struct scsi_target
*starget
)
353 return ((starget
->can_queue
> 0 &&
354 starget
->target_busy
>= starget
->can_queue
) ||
355 starget
->target_blocked
);
358 static inline int scsi_host_is_busy(struct Scsi_Host
*shost
)
360 if ((shost
->can_queue
> 0 && shost
->host_busy
>= shost
->can_queue
) ||
361 shost
->host_blocked
|| shost
->host_self_blocked
)
367 static void scsi_starved_list_run(struct Scsi_Host
*shost
)
369 LIST_HEAD(starved_list
);
370 struct scsi_device
*sdev
;
373 spin_lock_irqsave(shost
->host_lock
, flags
);
374 list_splice_init(&shost
->starved_list
, &starved_list
);
376 while (!list_empty(&starved_list
)) {
377 struct request_queue
*slq
;
380 * As long as shost is accepting commands and we have
381 * starved queues, call blk_run_queue. scsi_request_fn
382 * drops the queue_lock and can add us back to the
385 * host_lock protects the starved_list and starved_entry.
386 * scsi_request_fn must get the host_lock before checking
387 * or modifying starved_list or starved_entry.
389 if (scsi_host_is_busy(shost
))
392 sdev
= list_entry(starved_list
.next
,
393 struct scsi_device
, starved_entry
);
394 list_del_init(&sdev
->starved_entry
);
395 if (scsi_target_is_busy(scsi_target(sdev
))) {
396 list_move_tail(&sdev
->starved_entry
,
397 &shost
->starved_list
);
402 * Once we drop the host lock, a racing scsi_remove_device()
403 * call may remove the sdev from the starved list and destroy
404 * it and the queue. Mitigate by taking a reference to the
405 * queue and never touching the sdev again after we drop the
406 * host lock. Note: if __scsi_remove_device() invokes
407 * blk_cleanup_queue() before the queue is run from this
408 * function then blk_run_queue() will return immediately since
409 * blk_cleanup_queue() marks the queue with QUEUE_FLAG_DYING.
411 slq
= sdev
->request_queue
;
412 if (!blk_get_queue(slq
))
414 spin_unlock_irqrestore(shost
->host_lock
, flags
);
419 spin_lock_irqsave(shost
->host_lock
, flags
);
421 /* put any unprocessed entries back */
422 list_splice(&starved_list
, &shost
->starved_list
);
423 spin_unlock_irqrestore(shost
->host_lock
, flags
);
427 * Function: scsi_run_queue()
429 * Purpose: Select a proper request queue to serve next
431 * Arguments: q - last request's queue
435 * Notes: The previous command was completely finished, start
436 * a new one if possible.
438 static void scsi_run_queue(struct request_queue
*q
)
440 struct scsi_device
*sdev
= q
->queuedata
;
442 if (scsi_target(sdev
)->single_lun
)
443 scsi_single_lun_run(sdev
);
444 if (!list_empty(&sdev
->host
->starved_list
))
445 scsi_starved_list_run(sdev
->host
);
450 void scsi_requeue_run_queue(struct work_struct
*work
)
452 struct scsi_device
*sdev
;
453 struct request_queue
*q
;
455 sdev
= container_of(work
, struct scsi_device
, requeue_work
);
456 q
= sdev
->request_queue
;
461 * Function: scsi_requeue_command()
463 * Purpose: Handle post-processing of completed commands.
465 * Arguments: q - queue to operate on
466 * cmd - command that may need to be requeued.
470 * Notes: After command completion, there may be blocks left
471 * over which weren't finished by the previous command
472 * this can be for a number of reasons - the main one is
473 * I/O errors in the middle of the request, in which case
474 * we need to request the blocks that come after the bad
476 * Notes: Upon return, cmd is a stale pointer.
478 static void scsi_requeue_command(struct request_queue
*q
, struct scsi_cmnd
*cmd
)
480 struct scsi_device
*sdev
= cmd
->device
;
481 struct request
*req
= cmd
->request
;
484 spin_lock_irqsave(q
->queue_lock
, flags
);
485 blk_unprep_request(req
);
487 scsi_put_command(cmd
);
488 blk_requeue_request(q
, req
);
489 spin_unlock_irqrestore(q
->queue_lock
, flags
);
493 put_device(&sdev
->sdev_gendev
);
496 void scsi_next_command(struct scsi_cmnd
*cmd
)
498 struct scsi_device
*sdev
= cmd
->device
;
499 struct request_queue
*q
= sdev
->request_queue
;
501 scsi_put_command(cmd
);
504 put_device(&sdev
->sdev_gendev
);
507 void scsi_run_host_queues(struct Scsi_Host
*shost
)
509 struct scsi_device
*sdev
;
511 shost_for_each_device(sdev
, shost
)
512 scsi_run_queue(sdev
->request_queue
);
515 static void __scsi_release_buffers(struct scsi_cmnd
*, int);
518 * Function: scsi_end_request()
520 * Purpose: Post-processing of completed commands (usually invoked at end
521 * of upper level post-processing and scsi_io_completion).
523 * Arguments: cmd - command that is complete.
524 * error - 0 if I/O indicates success, < 0 for I/O error.
525 * bytes - number of bytes of completed I/O
526 * requeue - indicates whether we should requeue leftovers.
528 * Lock status: Assumed that lock is not held upon entry.
530 * Returns: cmd if requeue required, NULL otherwise.
532 * Notes: This is called for block device requests in order to
533 * mark some number of sectors as complete.
535 * We are guaranteeing that the request queue will be goosed
536 * at some point during this call.
537 * Notes: If cmd was requeued, upon return it will be a stale pointer.
539 static struct scsi_cmnd
*scsi_end_request(struct scsi_cmnd
*cmd
, int error
,
540 int bytes
, int requeue
)
542 struct request_queue
*q
= cmd
->device
->request_queue
;
543 struct request
*req
= cmd
->request
;
546 * If there are blocks left over at the end, set up the command
547 * to queue the remainder of them.
549 if (blk_end_request(req
, error
, bytes
)) {
550 /* kill remainder if no retrys */
551 if (error
&& scsi_noretry_cmd(cmd
))
552 blk_end_request_all(req
, error
);
556 * Bleah. Leftovers again. Stick the
557 * leftovers in the front of the
558 * queue, and goose the queue again.
560 scsi_release_buffers(cmd
);
561 scsi_requeue_command(q
, cmd
);
569 * This will goose the queue request function at the end, so we don't
570 * need to worry about launching another command.
572 __scsi_release_buffers(cmd
, 0);
573 scsi_next_command(cmd
);
577 static inline unsigned int scsi_sgtable_index(unsigned short nents
)
581 BUG_ON(nents
> SCSI_MAX_SG_SEGMENTS
);
586 index
= get_count_order(nents
) - 3;
591 static void scsi_sg_free(struct scatterlist
*sgl
, unsigned int nents
)
593 struct scsi_host_sg_pool
*sgp
;
595 sgp
= scsi_sg_pools
+ scsi_sgtable_index(nents
);
596 mempool_free(sgl
, sgp
->pool
);
599 static struct scatterlist
*scsi_sg_alloc(unsigned int nents
, gfp_t gfp_mask
)
601 struct scsi_host_sg_pool
*sgp
;
603 sgp
= scsi_sg_pools
+ scsi_sgtable_index(nents
);
604 return mempool_alloc(sgp
->pool
, gfp_mask
);
607 static int scsi_alloc_sgtable(struct scsi_data_buffer
*sdb
, int nents
,
614 ret
= __sg_alloc_table(&sdb
->table
, nents
, SCSI_MAX_SG_SEGMENTS
,
615 gfp_mask
, scsi_sg_alloc
);
617 __sg_free_table(&sdb
->table
, SCSI_MAX_SG_SEGMENTS
,
623 static void scsi_free_sgtable(struct scsi_data_buffer
*sdb
)
625 __sg_free_table(&sdb
->table
, SCSI_MAX_SG_SEGMENTS
, scsi_sg_free
);
628 static void __scsi_release_buffers(struct scsi_cmnd
*cmd
, int do_bidi_check
)
631 if (cmd
->sdb
.table
.nents
)
632 scsi_free_sgtable(&cmd
->sdb
);
634 memset(&cmd
->sdb
, 0, sizeof(cmd
->sdb
));
636 if (do_bidi_check
&& scsi_bidi_cmnd(cmd
)) {
637 struct scsi_data_buffer
*bidi_sdb
=
638 cmd
->request
->next_rq
->special
;
639 scsi_free_sgtable(bidi_sdb
);
640 kmem_cache_free(scsi_sdb_cache
, bidi_sdb
);
641 cmd
->request
->next_rq
->special
= NULL
;
644 if (scsi_prot_sg_count(cmd
))
645 scsi_free_sgtable(cmd
->prot_sdb
);
649 * Function: scsi_release_buffers()
651 * Purpose: Completion processing for block device I/O requests.
653 * Arguments: cmd - command that we are bailing.
655 * Lock status: Assumed that no lock is held upon entry.
659 * Notes: In the event that an upper level driver rejects a
660 * command, we must release resources allocated during
661 * the __init_io() function. Primarily this would involve
662 * the scatter-gather table, and potentially any bounce
665 void scsi_release_buffers(struct scsi_cmnd
*cmd
)
667 __scsi_release_buffers(cmd
, 1);
669 EXPORT_SYMBOL(scsi_release_buffers
);
672 * __scsi_error_from_host_byte - translate SCSI error code into errno
673 * @cmd: SCSI command (unused)
674 * @result: scsi error code
676 * Translate SCSI error code into standard UNIX errno.
678 * -ENOLINK temporary transport failure
679 * -EREMOTEIO permanent target failure, do not retry
680 * -EBADE permanent nexus failure, retry on other path
681 * -ENOSPC No write space available
682 * -ENODATA Medium error
683 * -EIO unspecified I/O error
685 static int __scsi_error_from_host_byte(struct scsi_cmnd
*cmd
, int result
)
689 switch(host_byte(result
)) {
690 case DID_TRANSPORT_FAILFAST
:
693 case DID_TARGET_FAILURE
:
694 set_host_byte(cmd
, DID_OK
);
697 case DID_NEXUS_FAILURE
:
698 set_host_byte(cmd
, DID_OK
);
701 case DID_ALLOC_FAILURE
:
702 set_host_byte(cmd
, DID_OK
);
705 case DID_MEDIUM_ERROR
:
706 set_host_byte(cmd
, DID_OK
);
718 * Function: scsi_io_completion()
720 * Purpose: Completion processing for block device I/O requests.
722 * Arguments: cmd - command that is finished.
724 * Lock status: Assumed that no lock is held upon entry.
728 * Notes: This function is matched in terms of capabilities to
729 * the function that created the scatter-gather list.
730 * In other words, if there are no bounce buffers
731 * (the normal case for most drivers), we don't need
732 * the logic to deal with cleaning up afterwards.
734 * We must call scsi_end_request(). This will finish off
735 * the specified number of sectors. If we are done, the
736 * command block will be released and the queue function
737 * will be goosed. If we are not done then we have to
738 * figure out what to do next:
740 * a) We can call scsi_requeue_command(). The request
741 * will be unprepared and put back on the queue. Then
742 * a new command will be created for it. This should
743 * be used if we made forward progress, or if we want
744 * to switch from READ(10) to READ(6) for example.
746 * b) We can call scsi_queue_insert(). The request will
747 * be put back on the queue and retried using the same
748 * command as before, possibly after a delay.
750 * c) We can call blk_end_request() with -EIO to fail
751 * the remainder of the request.
753 void scsi_io_completion(struct scsi_cmnd
*cmd
, unsigned int good_bytes
)
755 int result
= cmd
->result
;
756 struct request_queue
*q
= cmd
->device
->request_queue
;
757 struct request
*req
= cmd
->request
;
759 struct scsi_sense_hdr sshdr
;
761 int sense_deferred
= 0;
762 enum {ACTION_FAIL
, ACTION_REPREP
, ACTION_RETRY
,
763 ACTION_DELAYED_RETRY
} action
;
764 char *description
= NULL
;
765 unsigned long wait_for
= (cmd
->allowed
+ 1) * req
->timeout
;
768 sense_valid
= scsi_command_normalize_sense(cmd
, &sshdr
);
770 sense_deferred
= scsi_sense_is_deferred(&sshdr
);
773 if (req
->cmd_type
== REQ_TYPE_BLOCK_PC
) { /* SG_IO ioctl from block level */
775 if (sense_valid
&& req
->sense
) {
777 * SG_IO wants current and deferred errors
779 int len
= 8 + cmd
->sense_buffer
[7];
781 if (len
> SCSI_SENSE_BUFFERSIZE
)
782 len
= SCSI_SENSE_BUFFERSIZE
;
783 memcpy(req
->sense
, cmd
->sense_buffer
, len
);
784 req
->sense_len
= len
;
787 error
= __scsi_error_from_host_byte(cmd
, result
);
790 * __scsi_error_from_host_byte may have reset the host_byte
792 req
->errors
= cmd
->result
;
794 req
->resid_len
= scsi_get_resid(cmd
);
796 if (scsi_bidi_cmnd(cmd
)) {
798 * Bidi commands Must be complete as a whole,
799 * both sides at once.
801 req
->next_rq
->resid_len
= scsi_in(cmd
)->resid
;
803 scsi_release_buffers(cmd
);
804 blk_end_request_all(req
, 0);
806 scsi_next_command(cmd
);
811 /* no bidi support for !REQ_TYPE_BLOCK_PC yet */
812 BUG_ON(blk_bidi_rq(req
));
815 * Next deal with any sectors which we were able to correctly
818 SCSI_LOG_HLCOMPLETE(1, printk("%u sectors total, "
820 blk_rq_sectors(req
), good_bytes
));
823 * Recovered errors need reporting, but they're always treated
824 * as success, so fiddle the result code here. For BLOCK_PC
825 * we already took a copy of the original into rq->errors which
826 * is what gets returned to the user
828 if (sense_valid
&& (sshdr
.sense_key
== RECOVERED_ERROR
)) {
829 /* if ATA PASS-THROUGH INFORMATION AVAILABLE skip
830 * print since caller wants ATA registers. Only occurs on
831 * SCSI ATA PASS_THROUGH commands when CK_COND=1
833 if ((sshdr
.asc
== 0x0) && (sshdr
.ascq
== 0x1d))
835 else if (!(req
->cmd_flags
& REQ_QUIET
))
836 scsi_print_sense("", cmd
);
838 /* BLOCK_PC may have set error */
843 * A number of bytes were successfully read. If there
844 * are leftovers and there is some kind of error
845 * (result != 0), retry the rest.
847 if (scsi_end_request(cmd
, error
, good_bytes
, result
== 0) == NULL
)
850 error
= __scsi_error_from_host_byte(cmd
, result
);
852 if (host_byte(result
) == DID_RESET
) {
853 /* Third party bus reset or reset for error recovery
854 * reasons. Just retry the command and see what
857 action
= ACTION_RETRY
;
858 } else if (sense_valid
&& !sense_deferred
) {
859 switch (sshdr
.sense_key
) {
861 if (cmd
->device
->removable
) {
862 /* Detected disc change. Set a bit
863 * and quietly refuse further access.
865 cmd
->device
->changed
= 1;
866 description
= "Media Changed";
867 action
= ACTION_FAIL
;
869 /* Must have been a power glitch, or a
870 * bus reset. Could not have been a
871 * media change, so we just retry the
872 * command and see what happens.
874 action
= ACTION_RETRY
;
877 case ILLEGAL_REQUEST
:
878 /* If we had an ILLEGAL REQUEST returned, then
879 * we may have performed an unsupported
880 * command. The only thing this should be
881 * would be a ten byte read where only a six
882 * byte read was supported. Also, on a system
883 * where READ CAPACITY failed, we may have
884 * read past the end of the disk.
886 if ((cmd
->device
->use_10_for_rw
&&
887 sshdr
.asc
== 0x20 && sshdr
.ascq
== 0x00) &&
888 (cmd
->cmnd
[0] == READ_10
||
889 cmd
->cmnd
[0] == WRITE_10
)) {
890 /* This will issue a new 6-byte command. */
891 cmd
->device
->use_10_for_rw
= 0;
892 action
= ACTION_REPREP
;
893 } else if (sshdr
.asc
== 0x10) /* DIX */ {
894 description
= "Host Data Integrity Failure";
895 action
= ACTION_FAIL
;
897 /* INVALID COMMAND OPCODE or INVALID FIELD IN CDB */
898 } else if (sshdr
.asc
== 0x20 || sshdr
.asc
== 0x24) {
899 switch (cmd
->cmnd
[0]) {
901 description
= "Discard failure";
905 if (cmd
->cmnd
[1] & 0x8)
906 description
= "Discard failure";
909 "Write same failure";
912 description
= "Invalid command failure";
915 action
= ACTION_FAIL
;
918 action
= ACTION_FAIL
;
920 case ABORTED_COMMAND
:
921 action
= ACTION_FAIL
;
922 if (sshdr
.asc
== 0x10) { /* DIF */
923 description
= "Target Data Integrity Failure";
928 /* If the device is in the process of becoming
929 * ready, or has a temporary blockage, retry.
931 if (sshdr
.asc
== 0x04) {
932 switch (sshdr
.ascq
) {
933 case 0x01: /* becoming ready */
934 case 0x04: /* format in progress */
935 case 0x05: /* rebuild in progress */
936 case 0x06: /* recalculation in progress */
937 case 0x07: /* operation in progress */
938 case 0x08: /* Long write in progress */
939 case 0x09: /* self test in progress */
940 case 0x14: /* space allocation in progress */
941 action
= ACTION_DELAYED_RETRY
;
944 description
= "Device not ready";
945 action
= ACTION_FAIL
;
949 description
= "Device not ready";
950 action
= ACTION_FAIL
;
953 case VOLUME_OVERFLOW
:
954 /* See SSC3rXX or current. */
955 action
= ACTION_FAIL
;
958 description
= "Unhandled sense code";
959 action
= ACTION_FAIL
;
963 description
= "Unhandled error code";
964 action
= ACTION_FAIL
;
967 if (action
!= ACTION_FAIL
&&
968 time_before(cmd
->jiffies_at_alloc
+ wait_for
, jiffies
)) {
969 action
= ACTION_FAIL
;
970 description
= "Command timed out";
975 /* Give up and fail the remainder of the request */
976 scsi_release_buffers(cmd
);
977 if (!(req
->cmd_flags
& REQ_QUIET
)) {
979 scmd_printk(KERN_INFO
, cmd
, "%s\n",
981 scsi_print_result(cmd
);
982 if (driver_byte(result
) & DRIVER_SENSE
)
983 scsi_print_sense("", cmd
);
984 scsi_print_command(cmd
);
986 if (blk_end_request_err(req
, error
))
987 scsi_requeue_command(q
, cmd
);
989 scsi_next_command(cmd
);
992 /* Unprep the request and put it back at the head of the queue.
993 * A new command will be prepared and issued.
995 scsi_release_buffers(cmd
);
996 scsi_requeue_command(q
, cmd
);
999 /* Retry the same command immediately */
1000 __scsi_queue_insert(cmd
, SCSI_MLQUEUE_EH_RETRY
, 0);
1002 case ACTION_DELAYED_RETRY
:
1003 /* Retry the same command after a delay */
1004 __scsi_queue_insert(cmd
, SCSI_MLQUEUE_DEVICE_BUSY
, 0);
1009 static int scsi_init_sgtable(struct request
*req
, struct scsi_data_buffer
*sdb
,
1015 * If sg table allocation fails, requeue request later.
1017 if (unlikely(scsi_alloc_sgtable(sdb
, req
->nr_phys_segments
,
1019 return BLKPREP_DEFER
;
1025 * Next, walk the list, and fill in the addresses and sizes of
1028 count
= blk_rq_map_sg(req
->q
, req
, sdb
->table
.sgl
);
1029 BUG_ON(count
> sdb
->table
.nents
);
1030 sdb
->table
.nents
= count
;
1031 sdb
->length
= blk_rq_bytes(req
);
1036 * Function: scsi_init_io()
1038 * Purpose: SCSI I/O initialize function.
1040 * Arguments: cmd - Command descriptor we wish to initialize
1042 * Returns: 0 on success
1043 * BLKPREP_DEFER if the failure is retryable
1044 * BLKPREP_KILL if the failure is fatal
1046 int scsi_init_io(struct scsi_cmnd
*cmd
, gfp_t gfp_mask
)
1048 struct scsi_device
*sdev
= cmd
->device
;
1049 struct request
*rq
= cmd
->request
;
1051 int error
= scsi_init_sgtable(rq
, &cmd
->sdb
, gfp_mask
);
1055 if (blk_bidi_rq(rq
)) {
1056 struct scsi_data_buffer
*bidi_sdb
= kmem_cache_zalloc(
1057 scsi_sdb_cache
, GFP_ATOMIC
);
1059 error
= BLKPREP_DEFER
;
1063 rq
->next_rq
->special
= bidi_sdb
;
1064 error
= scsi_init_sgtable(rq
->next_rq
, bidi_sdb
, GFP_ATOMIC
);
1069 if (blk_integrity_rq(rq
)) {
1070 struct scsi_data_buffer
*prot_sdb
= cmd
->prot_sdb
;
1073 BUG_ON(prot_sdb
== NULL
);
1074 ivecs
= blk_rq_count_integrity_sg(rq
->q
, rq
->bio
);
1076 if (scsi_alloc_sgtable(prot_sdb
, ivecs
, gfp_mask
)) {
1077 error
= BLKPREP_DEFER
;
1081 count
= blk_rq_map_integrity_sg(rq
->q
, rq
->bio
,
1082 prot_sdb
->table
.sgl
);
1083 BUG_ON(unlikely(count
> ivecs
));
1084 BUG_ON(unlikely(count
> queue_max_integrity_segments(rq
->q
)));
1086 cmd
->prot_sdb
= prot_sdb
;
1087 cmd
->prot_sdb
->table
.nents
= count
;
1093 scsi_release_buffers(cmd
);
1094 cmd
->request
->special
= NULL
;
1095 scsi_put_command(cmd
);
1096 put_device(&sdev
->sdev_gendev
);
1099 EXPORT_SYMBOL(scsi_init_io
);
1101 static struct scsi_cmnd
*scsi_get_cmd_from_req(struct scsi_device
*sdev
,
1102 struct request
*req
)
1104 struct scsi_cmnd
*cmd
;
1106 if (!req
->special
) {
1107 /* Bail if we can't get a reference to the device */
1108 if (!get_device(&sdev
->sdev_gendev
))
1111 cmd
= scsi_get_command(sdev
, GFP_ATOMIC
);
1112 if (unlikely(!cmd
)) {
1113 put_device(&sdev
->sdev_gendev
);
1121 /* pull a tag out of the request if we have one */
1122 cmd
->tag
= req
->tag
;
1125 cmd
->cmnd
= req
->cmd
;
1126 cmd
->prot_op
= SCSI_PROT_NORMAL
;
1131 int scsi_setup_blk_pc_cmnd(struct scsi_device
*sdev
, struct request
*req
)
1133 struct scsi_cmnd
*cmd
;
1134 int ret
= scsi_prep_state_check(sdev
, req
);
1136 if (ret
!= BLKPREP_OK
)
1139 cmd
= scsi_get_cmd_from_req(sdev
, req
);
1141 return BLKPREP_DEFER
;
1144 * BLOCK_PC requests may transfer data, in which case they must
1145 * a bio attached to them. Or they might contain a SCSI command
1146 * that does not transfer data, in which case they may optionally
1147 * submit a request without an attached bio.
1152 BUG_ON(!req
->nr_phys_segments
);
1154 ret
= scsi_init_io(cmd
, GFP_ATOMIC
);
1158 BUG_ON(blk_rq_bytes(req
));
1160 memset(&cmd
->sdb
, 0, sizeof(cmd
->sdb
));
1164 cmd
->cmd_len
= req
->cmd_len
;
1165 if (!blk_rq_bytes(req
))
1166 cmd
->sc_data_direction
= DMA_NONE
;
1167 else if (rq_data_dir(req
) == WRITE
)
1168 cmd
->sc_data_direction
= DMA_TO_DEVICE
;
1170 cmd
->sc_data_direction
= DMA_FROM_DEVICE
;
1172 cmd
->transfersize
= blk_rq_bytes(req
);
1173 cmd
->allowed
= req
->retries
;
1176 EXPORT_SYMBOL(scsi_setup_blk_pc_cmnd
);
1179 * Setup a REQ_TYPE_FS command. These are simple read/write request
1180 * from filesystems that still need to be translated to SCSI CDBs from
1183 int scsi_setup_fs_cmnd(struct scsi_device
*sdev
, struct request
*req
)
1185 struct scsi_cmnd
*cmd
;
1186 int ret
= scsi_prep_state_check(sdev
, req
);
1188 if (ret
!= BLKPREP_OK
)
1191 if (unlikely(sdev
->scsi_dh_data
&& sdev
->scsi_dh_data
->scsi_dh
1192 && sdev
->scsi_dh_data
->scsi_dh
->prep_fn
)) {
1193 ret
= sdev
->scsi_dh_data
->scsi_dh
->prep_fn(sdev
, req
);
1194 if (ret
!= BLKPREP_OK
)
1199 * Filesystem requests must transfer data.
1201 BUG_ON(!req
->nr_phys_segments
);
1203 cmd
= scsi_get_cmd_from_req(sdev
, req
);
1205 return BLKPREP_DEFER
;
1207 memset(cmd
->cmnd
, 0, BLK_MAX_CDB
);
1208 return scsi_init_io(cmd
, GFP_ATOMIC
);
1210 EXPORT_SYMBOL(scsi_setup_fs_cmnd
);
1212 int scsi_prep_state_check(struct scsi_device
*sdev
, struct request
*req
)
1214 int ret
= BLKPREP_OK
;
1217 * If the device is not in running state we will reject some
1220 if (unlikely(sdev
->sdev_state
!= SDEV_RUNNING
)) {
1221 switch (sdev
->sdev_state
) {
1223 case SDEV_TRANSPORT_OFFLINE
:
1225 * If the device is offline we refuse to process any
1226 * commands. The device must be brought online
1227 * before trying any recovery commands.
1229 sdev_printk(KERN_ERR
, sdev
,
1230 "rejecting I/O to offline device\n");
1235 * If the device is fully deleted, we refuse to
1236 * process any commands as well.
1238 sdev_printk(KERN_ERR
, sdev
,
1239 "rejecting I/O to dead device\n");
1244 case SDEV_CREATED_BLOCK
:
1246 * If the devices is blocked we defer normal commands.
1248 if (!(req
->cmd_flags
& REQ_PREEMPT
))
1249 ret
= BLKPREP_DEFER
;
1253 * For any other not fully online state we only allow
1254 * special commands. In particular any user initiated
1255 * command is not allowed.
1257 if (!(req
->cmd_flags
& REQ_PREEMPT
))
1264 EXPORT_SYMBOL(scsi_prep_state_check
);
1266 int scsi_prep_return(struct request_queue
*q
, struct request
*req
, int ret
)
1268 struct scsi_device
*sdev
= q
->queuedata
;
1272 req
->errors
= DID_NO_CONNECT
<< 16;
1273 /* release the command and kill it */
1275 struct scsi_cmnd
*cmd
= req
->special
;
1276 scsi_release_buffers(cmd
);
1277 scsi_put_command(cmd
);
1278 put_device(&sdev
->sdev_gendev
);
1279 req
->special
= NULL
;
1284 * If we defer, the blk_peek_request() returns NULL, but the
1285 * queue must be restarted, so we schedule a callback to happen
1288 if (sdev
->device_busy
== 0)
1289 blk_delay_queue(q
, SCSI_QUEUE_DELAY
);
1292 req
->cmd_flags
|= REQ_DONTPREP
;
1297 EXPORT_SYMBOL(scsi_prep_return
);
1299 int scsi_prep_fn(struct request_queue
*q
, struct request
*req
)
1301 struct scsi_device
*sdev
= q
->queuedata
;
1302 int ret
= BLKPREP_KILL
;
1304 if (req
->cmd_type
== REQ_TYPE_BLOCK_PC
)
1305 ret
= scsi_setup_blk_pc_cmnd(sdev
, req
);
1306 return scsi_prep_return(q
, req
, ret
);
1308 EXPORT_SYMBOL(scsi_prep_fn
);
1311 * scsi_dev_queue_ready: if we can send requests to sdev, return 1 else
1314 * Called with the queue_lock held.
1316 static inline int scsi_dev_queue_ready(struct request_queue
*q
,
1317 struct scsi_device
*sdev
)
1319 if (sdev
->device_busy
== 0 && sdev
->device_blocked
) {
1321 * unblock after device_blocked iterates to zero
1323 if (--sdev
->device_blocked
== 0) {
1325 sdev_printk(KERN_INFO
, sdev
,
1326 "unblocking device at zero depth\n"));
1328 blk_delay_queue(q
, SCSI_QUEUE_DELAY
);
1332 if (scsi_device_is_busy(sdev
))
1340 * scsi_target_queue_ready: checks if there we can send commands to target
1341 * @sdev: scsi device on starget to check.
1343 * Called with the host lock held.
1345 static inline int scsi_target_queue_ready(struct Scsi_Host
*shost
,
1346 struct scsi_device
*sdev
)
1348 struct scsi_target
*starget
= scsi_target(sdev
);
1350 if (starget
->single_lun
) {
1351 if (starget
->starget_sdev_user
&&
1352 starget
->starget_sdev_user
!= sdev
)
1354 starget
->starget_sdev_user
= sdev
;
1357 if (starget
->target_busy
== 0 && starget
->target_blocked
) {
1359 * unblock after target_blocked iterates to zero
1361 if (--starget
->target_blocked
== 0) {
1362 SCSI_LOG_MLQUEUE(3, starget_printk(KERN_INFO
, starget
,
1363 "unblocking target at zero depth\n"));
1368 if (scsi_target_is_busy(starget
)) {
1369 list_move_tail(&sdev
->starved_entry
, &shost
->starved_list
);
1377 * scsi_host_queue_ready: if we can send requests to shost, return 1 else
1378 * return 0. We must end up running the queue again whenever 0 is
1379 * returned, else IO can hang.
1381 * Called with host_lock held.
1383 static inline int scsi_host_queue_ready(struct request_queue
*q
,
1384 struct Scsi_Host
*shost
,
1385 struct scsi_device
*sdev
)
1387 if (scsi_host_in_recovery(shost
))
1389 if (shost
->host_busy
== 0 && shost
->host_blocked
) {
1391 * unblock after host_blocked iterates to zero
1393 if (--shost
->host_blocked
== 0) {
1395 printk("scsi%d unblocking host at zero depth\n",
1401 if (scsi_host_is_busy(shost
)) {
1402 if (list_empty(&sdev
->starved_entry
))
1403 list_add_tail(&sdev
->starved_entry
, &shost
->starved_list
);
1407 /* We're OK to process the command, so we can't be starved */
1408 if (!list_empty(&sdev
->starved_entry
))
1409 list_del_init(&sdev
->starved_entry
);
1415 * Busy state exporting function for request stacking drivers.
1417 * For efficiency, no lock is taken to check the busy state of
1418 * shost/starget/sdev, since the returned value is not guaranteed and
1419 * may be changed after request stacking drivers call the function,
1420 * regardless of taking lock or not.
1422 * When scsi can't dispatch I/Os anymore and needs to kill I/Os scsi
1423 * needs to return 'not busy'. Otherwise, request stacking drivers
1424 * may hold requests forever.
1426 static int scsi_lld_busy(struct request_queue
*q
)
1428 struct scsi_device
*sdev
= q
->queuedata
;
1429 struct Scsi_Host
*shost
;
1431 if (blk_queue_dying(q
))
1437 * Ignore host/starget busy state.
1438 * Since block layer does not have a concept of fairness across
1439 * multiple queues, congestion of host/starget needs to be handled
1442 if (scsi_host_in_recovery(shost
) || scsi_device_is_busy(sdev
))
1449 * Kill a request for a dead device
1451 static void scsi_kill_request(struct request
*req
, struct request_queue
*q
)
1453 struct scsi_cmnd
*cmd
= req
->special
;
1454 struct scsi_device
*sdev
;
1455 struct scsi_target
*starget
;
1456 struct Scsi_Host
*shost
;
1458 blk_start_request(req
);
1460 scmd_printk(KERN_INFO
, cmd
, "killing request\n");
1463 starget
= scsi_target(sdev
);
1465 scsi_init_cmd_errh(cmd
);
1466 cmd
->result
= DID_NO_CONNECT
<< 16;
1467 atomic_inc(&cmd
->device
->iorequest_cnt
);
1470 * SCSI request completion path will do scsi_device_unbusy(),
1471 * bump busy counts. To bump the counters, we need to dance
1472 * with the locks as normal issue path does.
1474 sdev
->device_busy
++;
1475 spin_unlock(sdev
->request_queue
->queue_lock
);
1476 spin_lock(shost
->host_lock
);
1478 starget
->target_busy
++;
1479 spin_unlock(shost
->host_lock
);
1480 spin_lock(sdev
->request_queue
->queue_lock
);
1482 blk_complete_request(req
);
1485 static void scsi_softirq_done(struct request
*rq
)
1487 struct scsi_cmnd
*cmd
= rq
->special
;
1488 unsigned long wait_for
= (cmd
->allowed
+ 1) * rq
->timeout
;
1491 INIT_LIST_HEAD(&cmd
->eh_entry
);
1493 atomic_inc(&cmd
->device
->iodone_cnt
);
1495 atomic_inc(&cmd
->device
->ioerr_cnt
);
1497 disposition
= scsi_decide_disposition(cmd
);
1498 if (disposition
!= SUCCESS
&&
1499 time_before(cmd
->jiffies_at_alloc
+ wait_for
, jiffies
)) {
1500 sdev_printk(KERN_ERR
, cmd
->device
,
1501 "timing out command, waited %lus\n",
1503 disposition
= SUCCESS
;
1506 scsi_log_completion(cmd
, disposition
);
1508 switch (disposition
) {
1510 scsi_finish_command(cmd
);
1513 scsi_queue_insert(cmd
, SCSI_MLQUEUE_EH_RETRY
);
1515 case ADD_TO_MLQUEUE
:
1516 scsi_queue_insert(cmd
, SCSI_MLQUEUE_DEVICE_BUSY
);
1519 if (!scsi_eh_scmd_add(cmd
, 0))
1520 scsi_finish_command(cmd
);
1525 * Function: scsi_request_fn()
1527 * Purpose: Main strategy routine for SCSI.
1529 * Arguments: q - Pointer to actual queue.
1533 * Lock status: IO request lock assumed to be held when called.
1535 static void scsi_request_fn(struct request_queue
*q
)
1536 __releases(q
->queue_lock
)
1537 __acquires(q
->queue_lock
)
1539 struct scsi_device
*sdev
= q
->queuedata
;
1540 struct Scsi_Host
*shost
;
1541 struct scsi_cmnd
*cmd
;
1542 struct request
*req
;
1545 * To start with, we keep looping until the queue is empty, or until
1546 * the host is no longer able to accept any more requests.
1552 * get next queueable request. We do this early to make sure
1553 * that the request is fully prepared even if we cannot
1556 req
= blk_peek_request(q
);
1557 if (!req
|| !scsi_dev_queue_ready(q
, sdev
))
1560 if (unlikely(!scsi_device_online(sdev
))) {
1561 sdev_printk(KERN_ERR
, sdev
,
1562 "rejecting I/O to offline device\n");
1563 scsi_kill_request(req
, q
);
1569 * Remove the request from the request list.
1571 if (!(blk_queue_tagged(q
) && !blk_queue_start_tag(q
, req
)))
1572 blk_start_request(req
);
1573 sdev
->device_busy
++;
1575 spin_unlock(q
->queue_lock
);
1577 if (unlikely(cmd
== NULL
)) {
1578 printk(KERN_CRIT
"impossible request in %s.\n"
1579 "please mail a stack trace to "
1580 "linux-scsi@vger.kernel.org\n",
1582 blk_dump_rq_flags(req
, "foo");
1585 spin_lock(shost
->host_lock
);
1588 * We hit this when the driver is using a host wide
1589 * tag map. For device level tag maps the queue_depth check
1590 * in the device ready fn would prevent us from trying
1591 * to allocate a tag. Since the map is a shared host resource
1592 * we add the dev to the starved list so it eventually gets
1593 * a run when a tag is freed.
1595 if (blk_queue_tagged(q
) && !blk_rq_tagged(req
)) {
1596 if (list_empty(&sdev
->starved_entry
))
1597 list_add_tail(&sdev
->starved_entry
,
1598 &shost
->starved_list
);
1602 if (!scsi_target_queue_ready(shost
, sdev
))
1605 if (!scsi_host_queue_ready(q
, shost
, sdev
))
1608 scsi_target(sdev
)->target_busy
++;
1612 * XXX(hch): This is rather suboptimal, scsi_dispatch_cmd will
1613 * take the lock again.
1615 spin_unlock_irq(shost
->host_lock
);
1618 * Finally, initialize any error handling parameters, and set up
1619 * the timers for timeouts.
1621 scsi_init_cmd_errh(cmd
);
1624 * Dispatch the command to the low-level driver.
1626 rtn
= scsi_dispatch_cmd(cmd
);
1627 spin_lock_irq(q
->queue_lock
);
1635 spin_unlock_irq(shost
->host_lock
);
1638 * lock q, handle tag, requeue req, and decrement device_busy. We
1639 * must return with queue_lock held.
1641 * Decrementing device_busy without checking it is OK, as all such
1642 * cases (host limits or settings) should run the queue at some
1645 spin_lock_irq(q
->queue_lock
);
1646 blk_requeue_request(q
, req
);
1647 sdev
->device_busy
--;
1649 if (sdev
->device_busy
== 0)
1650 blk_delay_queue(q
, SCSI_QUEUE_DELAY
);
1653 u64
scsi_calculate_bounce_limit(struct Scsi_Host
*shost
)
1655 struct device
*host_dev
;
1656 u64 bounce_limit
= 0xffffffff;
1658 if (shost
->unchecked_isa_dma
)
1659 return BLK_BOUNCE_ISA
;
1661 * Platforms with virtual-DMA translation
1662 * hardware have no practical limit.
1664 if (!PCI_DMA_BUS_IS_PHYS
)
1665 return BLK_BOUNCE_ANY
;
1667 host_dev
= scsi_get_device(shost
);
1668 if (host_dev
&& host_dev
->dma_mask
)
1669 bounce_limit
= (u64
)dma_max_pfn(host_dev
) << PAGE_SHIFT
;
1671 return bounce_limit
;
1673 EXPORT_SYMBOL(scsi_calculate_bounce_limit
);
1675 struct request_queue
*__scsi_alloc_queue(struct Scsi_Host
*shost
,
1676 request_fn_proc
*request_fn
)
1678 struct request_queue
*q
;
1679 struct device
*dev
= shost
->dma_dev
;
1681 q
= blk_init_queue(request_fn
, NULL
);
1686 * this limit is imposed by hardware restrictions
1688 blk_queue_max_segments(q
, min_t(unsigned short, shost
->sg_tablesize
,
1689 SCSI_MAX_SG_CHAIN_SEGMENTS
));
1691 if (scsi_host_prot_dma(shost
)) {
1692 shost
->sg_prot_tablesize
=
1693 min_not_zero(shost
->sg_prot_tablesize
,
1694 (unsigned short)SCSI_MAX_PROT_SG_SEGMENTS
);
1695 BUG_ON(shost
->sg_prot_tablesize
< shost
->sg_tablesize
);
1696 blk_queue_max_integrity_segments(q
, shost
->sg_prot_tablesize
);
1699 blk_queue_max_hw_sectors(q
, shost
->max_sectors
);
1700 blk_queue_bounce_limit(q
, scsi_calculate_bounce_limit(shost
));
1701 blk_queue_segment_boundary(q
, shost
->dma_boundary
);
1702 dma_set_seg_boundary(dev
, shost
->dma_boundary
);
1704 blk_queue_max_segment_size(q
, dma_get_max_seg_size(dev
));
1706 if (!shost
->use_clustering
)
1707 q
->limits
.cluster
= 0;
1710 * set a reasonable default alignment on word boundaries: the
1711 * host and device may alter it using
1712 * blk_queue_update_dma_alignment() later.
1714 blk_queue_dma_alignment(q
, 0x03);
1718 EXPORT_SYMBOL(__scsi_alloc_queue
);
1720 struct request_queue
*scsi_alloc_queue(struct scsi_device
*sdev
)
1722 struct request_queue
*q
;
1724 q
= __scsi_alloc_queue(sdev
->host
, scsi_request_fn
);
1728 blk_queue_prep_rq(q
, scsi_prep_fn
);
1729 blk_queue_softirq_done(q
, scsi_softirq_done
);
1730 blk_queue_rq_timed_out(q
, scsi_times_out
);
1731 blk_queue_lld_busy(q
, scsi_lld_busy
);
1736 * Function: scsi_block_requests()
1738 * Purpose: Utility function used by low-level drivers to prevent further
1739 * commands from being queued to the device.
1741 * Arguments: shost - Host in question
1745 * Lock status: No locks are assumed held.
1747 * Notes: There is no timer nor any other means by which the requests
1748 * get unblocked other than the low-level driver calling
1749 * scsi_unblock_requests().
1751 void scsi_block_requests(struct Scsi_Host
*shost
)
1753 shost
->host_self_blocked
= 1;
1755 EXPORT_SYMBOL(scsi_block_requests
);
1758 * Function: scsi_unblock_requests()
1760 * Purpose: Utility function used by low-level drivers to allow further
1761 * commands from being queued to the device.
1763 * Arguments: shost - Host in question
1767 * Lock status: No locks are assumed held.
1769 * Notes: There is no timer nor any other means by which the requests
1770 * get unblocked other than the low-level driver calling
1771 * scsi_unblock_requests().
1773 * This is done as an API function so that changes to the
1774 * internals of the scsi mid-layer won't require wholesale
1775 * changes to drivers that use this feature.
1777 void scsi_unblock_requests(struct Scsi_Host
*shost
)
1779 shost
->host_self_blocked
= 0;
1780 scsi_run_host_queues(shost
);
1782 EXPORT_SYMBOL(scsi_unblock_requests
);
1784 int __init
scsi_init_queue(void)
1788 scsi_sdb_cache
= kmem_cache_create("scsi_data_buffer",
1789 sizeof(struct scsi_data_buffer
),
1791 if (!scsi_sdb_cache
) {
1792 printk(KERN_ERR
"SCSI: can't init scsi sdb cache\n");
1796 for (i
= 0; i
< SG_MEMPOOL_NR
; i
++) {
1797 struct scsi_host_sg_pool
*sgp
= scsi_sg_pools
+ i
;
1798 int size
= sgp
->size
* sizeof(struct scatterlist
);
1800 sgp
->slab
= kmem_cache_create(sgp
->name
, size
, 0,
1801 SLAB_HWCACHE_ALIGN
, NULL
);
1803 printk(KERN_ERR
"SCSI: can't init sg slab %s\n",
1808 sgp
->pool
= mempool_create_slab_pool(SG_MEMPOOL_SIZE
,
1811 printk(KERN_ERR
"SCSI: can't init sg mempool %s\n",
1820 for (i
= 0; i
< SG_MEMPOOL_NR
; i
++) {
1821 struct scsi_host_sg_pool
*sgp
= scsi_sg_pools
+ i
;
1823 mempool_destroy(sgp
->pool
);
1825 kmem_cache_destroy(sgp
->slab
);
1827 kmem_cache_destroy(scsi_sdb_cache
);
1832 void scsi_exit_queue(void)
1836 kmem_cache_destroy(scsi_sdb_cache
);
1838 for (i
= 0; i
< SG_MEMPOOL_NR
; i
++) {
1839 struct scsi_host_sg_pool
*sgp
= scsi_sg_pools
+ i
;
1840 mempool_destroy(sgp
->pool
);
1841 kmem_cache_destroy(sgp
->slab
);
1846 * scsi_mode_select - issue a mode select
1847 * @sdev: SCSI device to be queried
1848 * @pf: Page format bit (1 == standard, 0 == vendor specific)
1849 * @sp: Save page bit (0 == don't save, 1 == save)
1850 * @modepage: mode page being requested
1851 * @buffer: request buffer (may not be smaller than eight bytes)
1852 * @len: length of request buffer.
1853 * @timeout: command timeout
1854 * @retries: number of retries before failing
1855 * @data: returns a structure abstracting the mode header data
1856 * @sshdr: place to put sense data (or NULL if no sense to be collected).
1857 * must be SCSI_SENSE_BUFFERSIZE big.
1859 * Returns zero if successful; negative error number or scsi
1864 scsi_mode_select(struct scsi_device
*sdev
, int pf
, int sp
, int modepage
,
1865 unsigned char *buffer
, int len
, int timeout
, int retries
,
1866 struct scsi_mode_data
*data
, struct scsi_sense_hdr
*sshdr
)
1868 unsigned char cmd
[10];
1869 unsigned char *real_buffer
;
1872 memset(cmd
, 0, sizeof(cmd
));
1873 cmd
[1] = (pf
? 0x10 : 0) | (sp
? 0x01 : 0);
1875 if (sdev
->use_10_for_ms
) {
1878 real_buffer
= kmalloc(8 + len
, GFP_KERNEL
);
1881 memcpy(real_buffer
+ 8, buffer
, len
);
1885 real_buffer
[2] = data
->medium_type
;
1886 real_buffer
[3] = data
->device_specific
;
1887 real_buffer
[4] = data
->longlba
? 0x01 : 0;
1889 real_buffer
[6] = data
->block_descriptor_length
>> 8;
1890 real_buffer
[7] = data
->block_descriptor_length
;
1892 cmd
[0] = MODE_SELECT_10
;
1896 if (len
> 255 || data
->block_descriptor_length
> 255 ||
1900 real_buffer
= kmalloc(4 + len
, GFP_KERNEL
);
1903 memcpy(real_buffer
+ 4, buffer
, len
);
1906 real_buffer
[1] = data
->medium_type
;
1907 real_buffer
[2] = data
->device_specific
;
1908 real_buffer
[3] = data
->block_descriptor_length
;
1911 cmd
[0] = MODE_SELECT
;
1915 ret
= scsi_execute_req(sdev
, cmd
, DMA_TO_DEVICE
, real_buffer
, len
,
1916 sshdr
, timeout
, retries
, NULL
);
1920 EXPORT_SYMBOL_GPL(scsi_mode_select
);
1923 * scsi_mode_sense - issue a mode sense, falling back from 10 to six bytes if necessary.
1924 * @sdev: SCSI device to be queried
1925 * @dbd: set if mode sense will allow block descriptors to be returned
1926 * @modepage: mode page being requested
1927 * @buffer: request buffer (may not be smaller than eight bytes)
1928 * @len: length of request buffer.
1929 * @timeout: command timeout
1930 * @retries: number of retries before failing
1931 * @data: returns a structure abstracting the mode header data
1932 * @sshdr: place to put sense data (or NULL if no sense to be collected).
1933 * must be SCSI_SENSE_BUFFERSIZE big.
1935 * Returns zero if unsuccessful, or the header offset (either 4
1936 * or 8 depending on whether a six or ten byte command was
1937 * issued) if successful.
1940 scsi_mode_sense(struct scsi_device
*sdev
, int dbd
, int modepage
,
1941 unsigned char *buffer
, int len
, int timeout
, int retries
,
1942 struct scsi_mode_data
*data
, struct scsi_sense_hdr
*sshdr
)
1944 unsigned char cmd
[12];
1948 struct scsi_sense_hdr my_sshdr
;
1950 memset(data
, 0, sizeof(*data
));
1951 memset(&cmd
[0], 0, 12);
1952 cmd
[1] = dbd
& 0x18; /* allows DBD and LLBA bits */
1955 /* caller might not be interested in sense, but we need it */
1960 use_10_for_ms
= sdev
->use_10_for_ms
;
1962 if (use_10_for_ms
) {
1966 cmd
[0] = MODE_SENSE_10
;
1973 cmd
[0] = MODE_SENSE
;
1978 memset(buffer
, 0, len
);
1980 result
= scsi_execute_req(sdev
, cmd
, DMA_FROM_DEVICE
, buffer
, len
,
1981 sshdr
, timeout
, retries
, NULL
);
1983 /* This code looks awful: what it's doing is making sure an
1984 * ILLEGAL REQUEST sense return identifies the actual command
1985 * byte as the problem. MODE_SENSE commands can return
1986 * ILLEGAL REQUEST if the code page isn't supported */
1988 if (use_10_for_ms
&& !scsi_status_is_good(result
) &&
1989 (driver_byte(result
) & DRIVER_SENSE
)) {
1990 if (scsi_sense_valid(sshdr
)) {
1991 if ((sshdr
->sense_key
== ILLEGAL_REQUEST
) &&
1992 (sshdr
->asc
== 0x20) && (sshdr
->ascq
== 0)) {
1994 * Invalid command operation code
1996 sdev
->use_10_for_ms
= 0;
2002 if(scsi_status_is_good(result
)) {
2003 if (unlikely(buffer
[0] == 0x86 && buffer
[1] == 0x0b &&
2004 (modepage
== 6 || modepage
== 8))) {
2005 /* Initio breakage? */
2008 data
->medium_type
= 0;
2009 data
->device_specific
= 0;
2011 data
->block_descriptor_length
= 0;
2012 } else if(use_10_for_ms
) {
2013 data
->length
= buffer
[0]*256 + buffer
[1] + 2;
2014 data
->medium_type
= buffer
[2];
2015 data
->device_specific
= buffer
[3];
2016 data
->longlba
= buffer
[4] & 0x01;
2017 data
->block_descriptor_length
= buffer
[6]*256
2020 data
->length
= buffer
[0] + 1;
2021 data
->medium_type
= buffer
[1];
2022 data
->device_specific
= buffer
[2];
2023 data
->block_descriptor_length
= buffer
[3];
2025 data
->header_length
= header_length
;
2030 EXPORT_SYMBOL(scsi_mode_sense
);
2033 * scsi_test_unit_ready - test if unit is ready
2034 * @sdev: scsi device to change the state of.
2035 * @timeout: command timeout
2036 * @retries: number of retries before failing
2037 * @sshdr_external: Optional pointer to struct scsi_sense_hdr for
2038 * returning sense. Make sure that this is cleared before passing
2041 * Returns zero if unsuccessful or an error if TUR failed. For
2042 * removable media, UNIT_ATTENTION sets ->changed flag.
2045 scsi_test_unit_ready(struct scsi_device
*sdev
, int timeout
, int retries
,
2046 struct scsi_sense_hdr
*sshdr_external
)
2049 TEST_UNIT_READY
, 0, 0, 0, 0, 0,
2051 struct scsi_sense_hdr
*sshdr
;
2054 if (!sshdr_external
)
2055 sshdr
= kzalloc(sizeof(*sshdr
), GFP_KERNEL
);
2057 sshdr
= sshdr_external
;
2059 /* try to eat the UNIT_ATTENTION if there are enough retries */
2061 result
= scsi_execute_req(sdev
, cmd
, DMA_NONE
, NULL
, 0, sshdr
,
2062 timeout
, retries
, NULL
);
2063 if (sdev
->removable
&& scsi_sense_valid(sshdr
) &&
2064 sshdr
->sense_key
== UNIT_ATTENTION
)
2066 } while (scsi_sense_valid(sshdr
) &&
2067 sshdr
->sense_key
== UNIT_ATTENTION
&& --retries
);
2069 if (!sshdr_external
)
2073 EXPORT_SYMBOL(scsi_test_unit_ready
);
2076 * scsi_device_set_state - Take the given device through the device state model.
2077 * @sdev: scsi device to change the state of.
2078 * @state: state to change to.
2080 * Returns zero if unsuccessful or an error if the requested
2081 * transition is illegal.
2084 scsi_device_set_state(struct scsi_device
*sdev
, enum scsi_device_state state
)
2086 enum scsi_device_state oldstate
= sdev
->sdev_state
;
2088 if (state
== oldstate
)
2094 case SDEV_CREATED_BLOCK
:
2105 case SDEV_TRANSPORT_OFFLINE
:
2118 case SDEV_TRANSPORT_OFFLINE
:
2126 case SDEV_TRANSPORT_OFFLINE
:
2141 case SDEV_CREATED_BLOCK
:
2148 case SDEV_CREATED_BLOCK
:
2163 case SDEV_TRANSPORT_OFFLINE
:
2176 case SDEV_TRANSPORT_OFFLINE
:
2178 case SDEV_CREATED_BLOCK
:
2186 sdev
->sdev_state
= state
;
2190 SCSI_LOG_ERROR_RECOVERY(1,
2191 sdev_printk(KERN_ERR
, sdev
,
2192 "Illegal state transition %s->%s\n",
2193 scsi_device_state_name(oldstate
),
2194 scsi_device_state_name(state
))
2198 EXPORT_SYMBOL(scsi_device_set_state
);
2201 * sdev_evt_emit - emit a single SCSI device uevent
2202 * @sdev: associated SCSI device
2203 * @evt: event to emit
2205 * Send a single uevent (scsi_event) to the associated scsi_device.
2207 static void scsi_evt_emit(struct scsi_device
*sdev
, struct scsi_event
*evt
)
2212 switch (evt
->evt_type
) {
2213 case SDEV_EVT_MEDIA_CHANGE
:
2214 envp
[idx
++] = "SDEV_MEDIA_CHANGE=1";
2216 case SDEV_EVT_INQUIRY_CHANGE_REPORTED
:
2217 envp
[idx
++] = "SDEV_UA=INQUIRY_DATA_HAS_CHANGED";
2219 case SDEV_EVT_CAPACITY_CHANGE_REPORTED
:
2220 envp
[idx
++] = "SDEV_UA=CAPACITY_DATA_HAS_CHANGED";
2222 case SDEV_EVT_SOFT_THRESHOLD_REACHED_REPORTED
:
2223 envp
[idx
++] = "SDEV_UA=THIN_PROVISIONING_SOFT_THRESHOLD_REACHED";
2225 case SDEV_EVT_MODE_PARAMETER_CHANGE_REPORTED
:
2226 envp
[idx
++] = "SDEV_UA=MODE_PARAMETERS_CHANGED";
2228 case SDEV_EVT_LUN_CHANGE_REPORTED
:
2229 envp
[idx
++] = "SDEV_UA=REPORTED_LUNS_DATA_HAS_CHANGED";
2238 kobject_uevent_env(&sdev
->sdev_gendev
.kobj
, KOBJ_CHANGE
, envp
);
2242 * sdev_evt_thread - send a uevent for each scsi event
2243 * @work: work struct for scsi_device
2245 * Dispatch queued events to their associated scsi_device kobjects
2248 void scsi_evt_thread(struct work_struct
*work
)
2250 struct scsi_device
*sdev
;
2251 enum scsi_device_event evt_type
;
2252 LIST_HEAD(event_list
);
2254 sdev
= container_of(work
, struct scsi_device
, event_work
);
2256 for (evt_type
= SDEV_EVT_FIRST
; evt_type
<= SDEV_EVT_LAST
; evt_type
++)
2257 if (test_and_clear_bit(evt_type
, sdev
->pending_events
))
2258 sdev_evt_send_simple(sdev
, evt_type
, GFP_KERNEL
);
2261 struct scsi_event
*evt
;
2262 struct list_head
*this, *tmp
;
2263 unsigned long flags
;
2265 spin_lock_irqsave(&sdev
->list_lock
, flags
);
2266 list_splice_init(&sdev
->event_list
, &event_list
);
2267 spin_unlock_irqrestore(&sdev
->list_lock
, flags
);
2269 if (list_empty(&event_list
))
2272 list_for_each_safe(this, tmp
, &event_list
) {
2273 evt
= list_entry(this, struct scsi_event
, node
);
2274 list_del(&evt
->node
);
2275 scsi_evt_emit(sdev
, evt
);
2282 * sdev_evt_send - send asserted event to uevent thread
2283 * @sdev: scsi_device event occurred on
2284 * @evt: event to send
2286 * Assert scsi device event asynchronously.
2288 void sdev_evt_send(struct scsi_device
*sdev
, struct scsi_event
*evt
)
2290 unsigned long flags
;
2293 /* FIXME: currently this check eliminates all media change events
2294 * for polled devices. Need to update to discriminate between AN
2295 * and polled events */
2296 if (!test_bit(evt
->evt_type
, sdev
->supported_events
)) {
2302 spin_lock_irqsave(&sdev
->list_lock
, flags
);
2303 list_add_tail(&evt
->node
, &sdev
->event_list
);
2304 schedule_work(&sdev
->event_work
);
2305 spin_unlock_irqrestore(&sdev
->list_lock
, flags
);
2307 EXPORT_SYMBOL_GPL(sdev_evt_send
);
2310 * sdev_evt_alloc - allocate a new scsi event
2311 * @evt_type: type of event to allocate
2312 * @gfpflags: GFP flags for allocation
2314 * Allocates and returns a new scsi_event.
2316 struct scsi_event
*sdev_evt_alloc(enum scsi_device_event evt_type
,
2319 struct scsi_event
*evt
= kzalloc(sizeof(struct scsi_event
), gfpflags
);
2323 evt
->evt_type
= evt_type
;
2324 INIT_LIST_HEAD(&evt
->node
);
2326 /* evt_type-specific initialization, if any */
2328 case SDEV_EVT_MEDIA_CHANGE
:
2329 case SDEV_EVT_INQUIRY_CHANGE_REPORTED
:
2330 case SDEV_EVT_CAPACITY_CHANGE_REPORTED
:
2331 case SDEV_EVT_SOFT_THRESHOLD_REACHED_REPORTED
:
2332 case SDEV_EVT_MODE_PARAMETER_CHANGE_REPORTED
:
2333 case SDEV_EVT_LUN_CHANGE_REPORTED
:
2341 EXPORT_SYMBOL_GPL(sdev_evt_alloc
);
2344 * sdev_evt_send_simple - send asserted event to uevent thread
2345 * @sdev: scsi_device event occurred on
2346 * @evt_type: type of event to send
2347 * @gfpflags: GFP flags for allocation
2349 * Assert scsi device event asynchronously, given an event type.
2351 void sdev_evt_send_simple(struct scsi_device
*sdev
,
2352 enum scsi_device_event evt_type
, gfp_t gfpflags
)
2354 struct scsi_event
*evt
= sdev_evt_alloc(evt_type
, gfpflags
);
2356 sdev_printk(KERN_ERR
, sdev
, "event %d eaten due to OOM\n",
2361 sdev_evt_send(sdev
, evt
);
2363 EXPORT_SYMBOL_GPL(sdev_evt_send_simple
);
2366 * scsi_device_quiesce - Block user issued commands.
2367 * @sdev: scsi device to quiesce.
2369 * This works by trying to transition to the SDEV_QUIESCE state
2370 * (which must be a legal transition). When the device is in this
2371 * state, only special requests will be accepted, all others will
2372 * be deferred. Since special requests may also be requeued requests,
2373 * a successful return doesn't guarantee the device will be
2374 * totally quiescent.
2376 * Must be called with user context, may sleep.
2378 * Returns zero if unsuccessful or an error if not.
2381 scsi_device_quiesce(struct scsi_device
*sdev
)
2383 int err
= scsi_device_set_state(sdev
, SDEV_QUIESCE
);
2387 scsi_run_queue(sdev
->request_queue
);
2388 while (sdev
->device_busy
) {
2389 msleep_interruptible(200);
2390 scsi_run_queue(sdev
->request_queue
);
2394 EXPORT_SYMBOL(scsi_device_quiesce
);
2397 * scsi_device_resume - Restart user issued commands to a quiesced device.
2398 * @sdev: scsi device to resume.
2400 * Moves the device from quiesced back to running and restarts the
2403 * Must be called with user context, may sleep.
2405 void scsi_device_resume(struct scsi_device
*sdev
)
2407 /* check if the device state was mutated prior to resume, and if
2408 * so assume the state is being managed elsewhere (for example
2409 * device deleted during suspend)
2411 if (sdev
->sdev_state
!= SDEV_QUIESCE
||
2412 scsi_device_set_state(sdev
, SDEV_RUNNING
))
2414 scsi_run_queue(sdev
->request_queue
);
2416 EXPORT_SYMBOL(scsi_device_resume
);
2419 device_quiesce_fn(struct scsi_device
*sdev
, void *data
)
2421 scsi_device_quiesce(sdev
);
2425 scsi_target_quiesce(struct scsi_target
*starget
)
2427 starget_for_each_device(starget
, NULL
, device_quiesce_fn
);
2429 EXPORT_SYMBOL(scsi_target_quiesce
);
2432 device_resume_fn(struct scsi_device
*sdev
, void *data
)
2434 scsi_device_resume(sdev
);
2438 scsi_target_resume(struct scsi_target
*starget
)
2440 starget_for_each_device(starget
, NULL
, device_resume_fn
);
2442 EXPORT_SYMBOL(scsi_target_resume
);
2445 * scsi_internal_device_block - internal function to put a device temporarily into the SDEV_BLOCK state
2446 * @sdev: device to block
2448 * Block request made by scsi lld's to temporarily stop all
2449 * scsi commands on the specified device. Called from interrupt
2450 * or normal process context.
2452 * Returns zero if successful or error if not
2455 * This routine transitions the device to the SDEV_BLOCK state
2456 * (which must be a legal transition). When the device is in this
2457 * state, all commands are deferred until the scsi lld reenables
2458 * the device with scsi_device_unblock or device_block_tmo fires.
2461 scsi_internal_device_block(struct scsi_device
*sdev
)
2463 struct request_queue
*q
= sdev
->request_queue
;
2464 unsigned long flags
;
2467 err
= scsi_device_set_state(sdev
, SDEV_BLOCK
);
2469 err
= scsi_device_set_state(sdev
, SDEV_CREATED_BLOCK
);
2476 * The device has transitioned to SDEV_BLOCK. Stop the
2477 * block layer from calling the midlayer with this device's
2480 spin_lock_irqsave(q
->queue_lock
, flags
);
2482 spin_unlock_irqrestore(q
->queue_lock
, flags
);
2486 EXPORT_SYMBOL_GPL(scsi_internal_device_block
);
2489 * scsi_internal_device_unblock - resume a device after a block request
2490 * @sdev: device to resume
2491 * @new_state: state to set devices to after unblocking
2493 * Called by scsi lld's or the midlayer to restart the device queue
2494 * for the previously suspended scsi device. Called from interrupt or
2495 * normal process context.
2497 * Returns zero if successful or error if not.
2500 * This routine transitions the device to the SDEV_RUNNING state
2501 * or to one of the offline states (which must be a legal transition)
2502 * allowing the midlayer to goose the queue for this device.
2505 scsi_internal_device_unblock(struct scsi_device
*sdev
,
2506 enum scsi_device_state new_state
)
2508 struct request_queue
*q
= sdev
->request_queue
;
2509 unsigned long flags
;
2512 * Try to transition the scsi device to SDEV_RUNNING or one of the
2513 * offlined states and goose the device queue if successful.
2515 if ((sdev
->sdev_state
== SDEV_BLOCK
) ||
2516 (sdev
->sdev_state
== SDEV_TRANSPORT_OFFLINE
))
2517 sdev
->sdev_state
= new_state
;
2518 else if (sdev
->sdev_state
== SDEV_CREATED_BLOCK
) {
2519 if (new_state
== SDEV_TRANSPORT_OFFLINE
||
2520 new_state
== SDEV_OFFLINE
)
2521 sdev
->sdev_state
= new_state
;
2523 sdev
->sdev_state
= SDEV_CREATED
;
2524 } else if (sdev
->sdev_state
!= SDEV_CANCEL
&&
2525 sdev
->sdev_state
!= SDEV_OFFLINE
)
2528 spin_lock_irqsave(q
->queue_lock
, flags
);
2530 spin_unlock_irqrestore(q
->queue_lock
, flags
);
2534 EXPORT_SYMBOL_GPL(scsi_internal_device_unblock
);
2537 device_block(struct scsi_device
*sdev
, void *data
)
2539 scsi_internal_device_block(sdev
);
2543 target_block(struct device
*dev
, void *data
)
2545 if (scsi_is_target_device(dev
))
2546 starget_for_each_device(to_scsi_target(dev
), NULL
,
2552 scsi_target_block(struct device
*dev
)
2554 if (scsi_is_target_device(dev
))
2555 starget_for_each_device(to_scsi_target(dev
), NULL
,
2558 device_for_each_child(dev
, NULL
, target_block
);
2560 EXPORT_SYMBOL_GPL(scsi_target_block
);
2563 device_unblock(struct scsi_device
*sdev
, void *data
)
2565 scsi_internal_device_unblock(sdev
, *(enum scsi_device_state
*)data
);
2569 target_unblock(struct device
*dev
, void *data
)
2571 if (scsi_is_target_device(dev
))
2572 starget_for_each_device(to_scsi_target(dev
), data
,
2578 scsi_target_unblock(struct device
*dev
, enum scsi_device_state new_state
)
2580 if (scsi_is_target_device(dev
))
2581 starget_for_each_device(to_scsi_target(dev
), &new_state
,
2584 device_for_each_child(dev
, &new_state
, target_unblock
);
2586 EXPORT_SYMBOL_GPL(scsi_target_unblock
);
2589 * scsi_kmap_atomic_sg - find and atomically map an sg-elemnt
2590 * @sgl: scatter-gather list
2591 * @sg_count: number of segments in sg
2592 * @offset: offset in bytes into sg, on return offset into the mapped area
2593 * @len: bytes to map, on return number of bytes mapped
2595 * Returns virtual address of the start of the mapped page
2597 void *scsi_kmap_atomic_sg(struct scatterlist
*sgl
, int sg_count
,
2598 size_t *offset
, size_t *len
)
2601 size_t sg_len
= 0, len_complete
= 0;
2602 struct scatterlist
*sg
;
2605 WARN_ON(!irqs_disabled());
2607 for_each_sg(sgl
, sg
, sg_count
, i
) {
2608 len_complete
= sg_len
; /* Complete sg-entries */
2609 sg_len
+= sg
->length
;
2610 if (sg_len
> *offset
)
2614 if (unlikely(i
== sg_count
)) {
2615 printk(KERN_ERR
"%s: Bytes in sg: %zu, requested offset %zu, "
2617 __func__
, sg_len
, *offset
, sg_count
);
2622 /* Offset starting from the beginning of first page in this sg-entry */
2623 *offset
= *offset
- len_complete
+ sg
->offset
;
2625 /* Assumption: contiguous pages can be accessed as "page + i" */
2626 page
= nth_page(sg_page(sg
), (*offset
>> PAGE_SHIFT
));
2627 *offset
&= ~PAGE_MASK
;
2629 /* Bytes in this sg-entry from *offset to the end of the page */
2630 sg_len
= PAGE_SIZE
- *offset
;
2634 return kmap_atomic(page
);
2636 EXPORT_SYMBOL(scsi_kmap_atomic_sg
);
2639 * scsi_kunmap_atomic_sg - atomically unmap a virtual address, previously mapped with scsi_kmap_atomic_sg
2640 * @virt: virtual address to be unmapped
2642 void scsi_kunmap_atomic_sg(void *virt
)
2644 kunmap_atomic(virt
);
2646 EXPORT_SYMBOL(scsi_kunmap_atomic_sg
);
2648 void sdev_disable_disk_events(struct scsi_device
*sdev
)
2650 atomic_inc(&sdev
->disk_events_disable_depth
);
2652 EXPORT_SYMBOL(sdev_disable_disk_events
);
2654 void sdev_enable_disk_events(struct scsi_device
*sdev
)
2656 if (WARN_ON_ONCE(atomic_read(&sdev
->disk_events_disable_depth
) <= 0))
2658 atomic_dec(&sdev
->disk_events_disable_depth
);
2660 EXPORT_SYMBOL(sdev_enable_disk_events
);