4 * Copyright (C) 2000 Eric Youngdale,
5 * Copyright (C) 2002 Patrick Mansfield
7 * The general scanning/probing algorithm is as follows, exceptions are
8 * made to it depending on device specific flags, compilation options, and
9 * global variable (boot or module load time) settings.
11 * A specific LUN is scanned via an INQUIRY command; if the LUN has a
12 * device attached, a scsi_device is allocated and setup for it.
14 * For every id of every channel on the given host:
16 * Scan LUN 0; if the target responds to LUN 0 (even if there is no
17 * device or storage attached to LUN 0):
19 * If LUN 0 has a device attached, allocate and setup a
22 * If target is SCSI-3 or up, issue a REPORT LUN, and scan
23 * all of the LUNs returned by the REPORT LUN; else,
24 * sequentially scan LUNs up until some maximum is reached,
25 * or a LUN is seen that cannot have a device attached to it.
28 #include <linux/module.h>
29 #include <linux/moduleparam.h>
30 #include <linux/init.h>
31 #include <linux/blkdev.h>
32 #include <linux/delay.h>
33 #include <linux/kthread.h>
34 #include <linux/spinlock.h>
35 #include <linux/async.h>
36 #include <linux/slab.h>
38 #include <scsi/scsi.h>
39 #include <scsi/scsi_cmnd.h>
40 #include <scsi/scsi_device.h>
41 #include <scsi/scsi_driver.h>
42 #include <scsi/scsi_devinfo.h>
43 #include <scsi/scsi_host.h>
44 #include <scsi/scsi_transport.h>
45 #include <scsi/scsi_eh.h>
47 #include "scsi_priv.h"
48 #include "scsi_logging.h"
50 #define ALLOC_FAILURE_MSG KERN_ERR "%s: Allocation failure during" \
51 " SCSI scanning, some SCSI devices might not be configured\n"
56 #define SCSI_TIMEOUT (2*HZ)
59 * Prefix values for the SCSI id's (stored in sysfs name field)
61 #define SCSI_UID_SER_NUM 'S'
62 #define SCSI_UID_UNKNOWN 'Z'
65 * Return values of some of the scanning functions.
67 * SCSI_SCAN_NO_RESPONSE: no valid response received from the target, this
68 * includes allocation or general failures preventing IO from being sent.
70 * SCSI_SCAN_TARGET_PRESENT: target responded, but no device is available
73 * SCSI_SCAN_LUN_PRESENT: target responded, and a device is available on a
76 #define SCSI_SCAN_NO_RESPONSE 0
77 #define SCSI_SCAN_TARGET_PRESENT 1
78 #define SCSI_SCAN_LUN_PRESENT 2
80 static const char *scsi_null_device_strs
= "nullnullnullnull";
82 #define MAX_SCSI_LUNS 512
84 static u64 max_scsi_luns
= MAX_SCSI_LUNS
;
86 module_param_named(max_luns
, max_scsi_luns
, ullong
, S_IRUGO
|S_IWUSR
);
87 MODULE_PARM_DESC(max_luns
,
88 "last scsi LUN (should be between 1 and 2^64-1)");
90 #ifdef CONFIG_SCSI_SCAN_ASYNC
91 #define SCSI_SCAN_TYPE_DEFAULT "async"
93 #define SCSI_SCAN_TYPE_DEFAULT "sync"
96 char scsi_scan_type
[6] = SCSI_SCAN_TYPE_DEFAULT
;
98 module_param_string(scan
, scsi_scan_type
, sizeof(scsi_scan_type
), S_IRUGO
);
99 MODULE_PARM_DESC(scan
, "sync, async or none");
102 * max_scsi_report_luns: the maximum number of LUNS that will be
103 * returned from the REPORT LUNS command. 8 times this value must
104 * be allocated. In theory this could be up to an 8 byte value, but
105 * in practice, the maximum number of LUNs suppored by any device
108 static unsigned int max_scsi_report_luns
= 511;
110 module_param_named(max_report_luns
, max_scsi_report_luns
, uint
, S_IRUGO
|S_IWUSR
);
111 MODULE_PARM_DESC(max_report_luns
,
112 "REPORT LUNS maximum number of LUNS received (should be"
113 " between 1 and 16384)");
115 static unsigned int scsi_inq_timeout
= SCSI_TIMEOUT
/HZ
+ 18;
117 module_param_named(inq_timeout
, scsi_inq_timeout
, uint
, S_IRUGO
|S_IWUSR
);
118 MODULE_PARM_DESC(inq_timeout
,
119 "Timeout (in seconds) waiting for devices to answer INQUIRY."
120 " Default is 20. Some devices may need more; most need less.");
122 /* This lock protects only this list */
123 static DEFINE_SPINLOCK(async_scan_lock
);
124 static LIST_HEAD(scanning_hosts
);
126 struct async_scan_data
{
127 struct list_head list
;
128 struct Scsi_Host
*shost
;
129 struct completion prev_finished
;
133 * scsi_complete_async_scans - Wait for asynchronous scans to complete
135 * When this function returns, any host which started scanning before
136 * this function was called will have finished its scan. Hosts which
137 * started scanning after this function was called may or may not have
140 int scsi_complete_async_scans(void)
142 struct async_scan_data
*data
;
145 if (list_empty(&scanning_hosts
))
147 /* If we can't get memory immediately, that's OK. Just
148 * sleep a little. Even if we never get memory, the async
149 * scans will finish eventually.
151 data
= kmalloc(sizeof(*data
), GFP_KERNEL
);
157 init_completion(&data
->prev_finished
);
159 spin_lock(&async_scan_lock
);
160 /* Check that there's still somebody else on the list */
161 if (list_empty(&scanning_hosts
))
163 list_add_tail(&data
->list
, &scanning_hosts
);
164 spin_unlock(&async_scan_lock
);
166 printk(KERN_INFO
"scsi: waiting for bus probes to complete ...\n");
167 wait_for_completion(&data
->prev_finished
);
169 spin_lock(&async_scan_lock
);
170 list_del(&data
->list
);
171 if (!list_empty(&scanning_hosts
)) {
172 struct async_scan_data
*next
= list_entry(scanning_hosts
.next
,
173 struct async_scan_data
, list
);
174 complete(&next
->prev_finished
);
177 spin_unlock(&async_scan_lock
);
184 * scsi_unlock_floptical - unlock device via a special MODE SENSE command
185 * @sdev: scsi device to send command to
186 * @result: area to store the result of the MODE SENSE
189 * Send a vendor specific MODE SENSE (not a MODE SELECT) command.
190 * Called for BLIST_KEY devices.
192 static void scsi_unlock_floptical(struct scsi_device
*sdev
,
193 unsigned char *result
)
195 unsigned char scsi_cmd
[MAX_COMMAND_SIZE
];
197 printk(KERN_NOTICE
"scsi: unlocking floptical drive\n");
198 scsi_cmd
[0] = MODE_SENSE
;
202 scsi_cmd
[4] = 0x2a; /* size */
204 scsi_execute_req(sdev
, scsi_cmd
, DMA_FROM_DEVICE
, result
, 0x2a, NULL
,
205 SCSI_TIMEOUT
, 3, NULL
);
209 * scsi_alloc_sdev - allocate and setup a scsi_Device
210 * @starget: which target to allocate a &scsi_device for
212 * @hostdata: usually NULL and set by ->slave_alloc instead
215 * Allocate, initialize for io, and return a pointer to a scsi_Device.
216 * Stores the @shost, @channel, @id, and @lun in the scsi_Device, and
217 * adds scsi_Device to the appropriate list.
220 * scsi_Device pointer, or NULL on failure.
222 static struct scsi_device
*scsi_alloc_sdev(struct scsi_target
*starget
,
223 u64 lun
, void *hostdata
)
225 struct scsi_device
*sdev
;
226 int display_failure_msg
= 1, ret
;
227 struct Scsi_Host
*shost
= dev_to_shost(starget
->dev
.parent
);
228 extern void scsi_evt_thread(struct work_struct
*work
);
229 extern void scsi_requeue_run_queue(struct work_struct
*work
);
231 sdev
= kzalloc(sizeof(*sdev
) + shost
->transportt
->device_size
,
236 sdev
->vendor
= scsi_null_device_strs
;
237 sdev
->model
= scsi_null_device_strs
;
238 sdev
->rev
= scsi_null_device_strs
;
240 sdev
->queue_ramp_up_period
= SCSI_DEFAULT_RAMP_UP_PERIOD
;
241 sdev
->id
= starget
->id
;
243 sdev
->channel
= starget
->channel
;
244 sdev
->sdev_state
= SDEV_CREATED
;
245 INIT_LIST_HEAD(&sdev
->siblings
);
246 INIT_LIST_HEAD(&sdev
->same_target_siblings
);
247 INIT_LIST_HEAD(&sdev
->cmd_list
);
248 INIT_LIST_HEAD(&sdev
->starved_entry
);
249 INIT_LIST_HEAD(&sdev
->event_list
);
250 spin_lock_init(&sdev
->list_lock
);
251 INIT_WORK(&sdev
->event_work
, scsi_evt_thread
);
252 INIT_WORK(&sdev
->requeue_work
, scsi_requeue_run_queue
);
254 sdev
->sdev_gendev
.parent
= get_device(&starget
->dev
);
255 sdev
->sdev_target
= starget
;
257 /* usually NULL and set by ->slave_alloc instead */
258 sdev
->hostdata
= hostdata
;
260 /* if the device needs this changing, it may do so in the
261 * slave_configure function */
262 sdev
->max_device_blocked
= SCSI_DEFAULT_DEVICE_BLOCKED
;
265 * Some low level driver could use device->type
270 * Assume that the device will have handshaking problems,
271 * and then fix this field later if it turns out it
276 sdev
->request_queue
= scsi_alloc_queue(sdev
);
277 if (!sdev
->request_queue
) {
278 /* release fn is set up in scsi_sysfs_device_initialise, so
279 * have to free and put manually here */
280 put_device(&starget
->dev
);
284 WARN_ON_ONCE(!blk_get_queue(sdev
->request_queue
));
285 sdev
->request_queue
->queuedata
= sdev
;
286 scsi_adjust_queue_depth(sdev
, 0, sdev
->host
->cmd_per_lun
);
288 scsi_sysfs_device_initialize(sdev
);
290 if (shost
->hostt
->slave_alloc
) {
291 ret
= shost
->hostt
->slave_alloc(sdev
);
294 * if LLDD reports slave not present, don't clutter
295 * console with alloc failure messages
298 display_failure_msg
= 0;
299 goto out_device_destroy
;
306 __scsi_remove_device(sdev
);
308 if (display_failure_msg
)
309 printk(ALLOC_FAILURE_MSG
, __func__
);
313 static void scsi_target_destroy(struct scsi_target
*starget
)
315 struct device
*dev
= &starget
->dev
;
316 struct Scsi_Host
*shost
= dev_to_shost(dev
->parent
);
319 starget
->state
= STARGET_DEL
;
320 transport_destroy_device(dev
);
321 spin_lock_irqsave(shost
->host_lock
, flags
);
322 if (shost
->hostt
->target_destroy
)
323 shost
->hostt
->target_destroy(starget
);
324 list_del_init(&starget
->siblings
);
325 spin_unlock_irqrestore(shost
->host_lock
, flags
);
329 static void scsi_target_dev_release(struct device
*dev
)
331 struct device
*parent
= dev
->parent
;
332 struct scsi_target
*starget
= to_scsi_target(dev
);
338 static struct device_type scsi_target_type
= {
339 .name
= "scsi_target",
340 .release
= scsi_target_dev_release
,
343 int scsi_is_target_device(const struct device
*dev
)
345 return dev
->type
== &scsi_target_type
;
347 EXPORT_SYMBOL(scsi_is_target_device
);
349 static struct scsi_target
*__scsi_find_target(struct device
*parent
,
350 int channel
, uint id
)
352 struct scsi_target
*starget
, *found_starget
= NULL
;
353 struct Scsi_Host
*shost
= dev_to_shost(parent
);
355 * Search for an existing target for this sdev.
357 list_for_each_entry(starget
, &shost
->__targets
, siblings
) {
358 if (starget
->id
== id
&&
359 starget
->channel
== channel
) {
360 found_starget
= starget
;
365 get_device(&found_starget
->dev
);
367 return found_starget
;
371 * scsi_target_reap_ref_release - remove target from visibility
372 * @kref: the reap_ref in the target being released
374 * Called on last put of reap_ref, which is the indication that no device
375 * under this target is visible anymore, so render the target invisible in
376 * sysfs. Note: we have to be in user context here because the target reaps
377 * should be done in places where the scsi device visibility is being removed.
379 static void scsi_target_reap_ref_release(struct kref
*kref
)
381 struct scsi_target
*starget
382 = container_of(kref
, struct scsi_target
, reap_ref
);
385 * if we get here and the target is still in the CREATED state that
386 * means it was allocated but never made visible (because a scan
387 * turned up no LUNs), so don't call device_del() on it.
389 if (starget
->state
!= STARGET_CREATED
) {
390 transport_remove_device(&starget
->dev
);
391 device_del(&starget
->dev
);
393 scsi_target_destroy(starget
);
396 static void scsi_target_reap_ref_put(struct scsi_target
*starget
)
398 kref_put(&starget
->reap_ref
, scsi_target_reap_ref_release
);
402 * scsi_alloc_target - allocate a new or find an existing target
403 * @parent: parent of the target (need not be a scsi host)
404 * @channel: target channel number (zero if no channels)
405 * @id: target id number
407 * Return an existing target if one exists, provided it hasn't already
408 * gone into STARGET_DEL state, otherwise allocate a new target.
410 * The target is returned with an incremented reference, so the caller
411 * is responsible for both reaping and doing a last put
413 static struct scsi_target
*scsi_alloc_target(struct device
*parent
,
414 int channel
, uint id
)
416 struct Scsi_Host
*shost
= dev_to_shost(parent
);
417 struct device
*dev
= NULL
;
419 const int size
= sizeof(struct scsi_target
)
420 + shost
->transportt
->target_size
;
421 struct scsi_target
*starget
;
422 struct scsi_target
*found_target
;
425 starget
= kzalloc(size
, GFP_KERNEL
);
427 printk(KERN_ERR
"%s: allocation failure\n", __func__
);
431 device_initialize(dev
);
432 kref_init(&starget
->reap_ref
);
433 dev
->parent
= get_device(parent
);
434 dev_set_name(dev
, "target%d:%d:%d", shost
->host_no
, channel
, id
);
435 dev
->bus
= &scsi_bus_type
;
436 dev
->type
= &scsi_target_type
;
438 starget
->channel
= channel
;
439 starget
->can_queue
= 0;
440 INIT_LIST_HEAD(&starget
->siblings
);
441 INIT_LIST_HEAD(&starget
->devices
);
442 starget
->state
= STARGET_CREATED
;
443 starget
->scsi_level
= SCSI_2
;
444 starget
->max_target_blocked
= SCSI_DEFAULT_TARGET_BLOCKED
;
446 spin_lock_irqsave(shost
->host_lock
, flags
);
448 found_target
= __scsi_find_target(parent
, channel
, id
);
452 list_add_tail(&starget
->siblings
, &shost
->__targets
);
453 spin_unlock_irqrestore(shost
->host_lock
, flags
);
454 /* allocate and add */
455 transport_setup_device(dev
);
456 if (shost
->hostt
->target_alloc
) {
457 error
= shost
->hostt
->target_alloc(starget
);
460 dev_printk(KERN_ERR
, dev
, "target allocation failed, error %d\n", error
);
461 /* don't want scsi_target_reap to do the final
462 * put because it will be under the host lock */
463 scsi_target_destroy(starget
);
473 * release routine already fired if kref is zero, so if we can still
474 * take the reference, the target must be alive. If we can't, it must
475 * be dying and we need to wait for a new target
477 ref_got
= kref_get_unless_zero(&found_target
->reap_ref
);
479 spin_unlock_irqrestore(shost
->host_lock
, flags
);
485 * Unfortunately, we found a dying target; need to wait until it's
486 * dead before we can get a new one. There is an anomaly here. We
487 * *should* call scsi_target_reap() to balance the kref_get() of the
488 * reap_ref above. However, since the target being released, it's
489 * already invisible and the reap_ref is irrelevant. If we call
490 * scsi_target_reap() we might spuriously do another device_del() on
491 * an already invisible target.
493 put_device(&found_target
->dev
);
495 * length of time is irrelevant here, we just want to yield the CPU
496 * for a tick to avoid busy waiting for the target to die.
503 * scsi_target_reap - check to see if target is in use and destroy if not
504 * @starget: target to be checked
506 * This is used after removing a LUN or doing a last put of the target
507 * it checks atomically that nothing is using the target and removes
510 void scsi_target_reap(struct scsi_target
*starget
)
513 * serious problem if this triggers: STARGET_DEL is only set in the if
514 * the reap_ref drops to zero, so we're trying to do another final put
515 * on an already released kref
517 BUG_ON(starget
->state
== STARGET_DEL
);
518 scsi_target_reap_ref_put(starget
);
522 * sanitize_inquiry_string - remove non-graphical chars from an INQUIRY result string
523 * @s: INQUIRY result string to sanitize
524 * @len: length of the string
527 * The SCSI spec says that INQUIRY vendor, product, and revision
528 * strings must consist entirely of graphic ASCII characters,
529 * padded on the right with spaces. Since not all devices obey
530 * this rule, we will replace non-graphic or non-ASCII characters
531 * with spaces. Exception: a NUL character is interpreted as a
532 * string terminator, so all the following characters are set to
535 static void sanitize_inquiry_string(unsigned char *s
, int len
)
539 for (; len
> 0; (--len
, ++s
)) {
542 if (terminated
|| *s
< 0x20 || *s
> 0x7e)
548 * scsi_probe_lun - probe a single LUN using a SCSI INQUIRY
549 * @sdev: scsi_device to probe
550 * @inq_result: area to store the INQUIRY result
551 * @result_len: len of inq_result
552 * @bflags: store any bflags found here
555 * Probe the lun associated with @req using a standard SCSI INQUIRY;
557 * If the INQUIRY is successful, zero is returned and the
558 * INQUIRY data is in @inq_result; the scsi_level and INQUIRY length
559 * are copied to the scsi_device any flags value is stored in *@bflags.
561 static int scsi_probe_lun(struct scsi_device
*sdev
, unsigned char *inq_result
,
562 int result_len
, int *bflags
)
564 unsigned char scsi_cmd
[MAX_COMMAND_SIZE
];
565 int first_inquiry_len
, try_inquiry_len
, next_inquiry_len
;
566 int response_len
= 0;
567 int pass
, count
, result
;
568 struct scsi_sense_hdr sshdr
;
572 /* Perform up to 3 passes. The first pass uses a conservative
573 * transfer length of 36 unless sdev->inquiry_len specifies a
574 * different value. */
575 first_inquiry_len
= sdev
->inquiry_len
? sdev
->inquiry_len
: 36;
576 try_inquiry_len
= first_inquiry_len
;
580 SCSI_LOG_SCAN_BUS(3, sdev_printk(KERN_INFO
, sdev
,
581 "scsi scan: INQUIRY pass %d length %d\n",
582 pass
, try_inquiry_len
));
584 /* Each pass gets up to three chances to ignore Unit Attention */
585 for (count
= 0; count
< 3; ++count
) {
588 memset(scsi_cmd
, 0, 6);
589 scsi_cmd
[0] = INQUIRY
;
590 scsi_cmd
[4] = (unsigned char) try_inquiry_len
;
592 memset(inq_result
, 0, try_inquiry_len
);
594 result
= scsi_execute_req(sdev
, scsi_cmd
, DMA_FROM_DEVICE
,
595 inq_result
, try_inquiry_len
, &sshdr
,
596 HZ
/ 2 + HZ
* scsi_inq_timeout
, 3,
599 SCSI_LOG_SCAN_BUS(3, printk(KERN_INFO
"scsi scan: INQUIRY %s "
601 result
? "failed" : "successful", result
));
605 * not-ready to ready transition [asc/ascq=0x28/0x0]
606 * or power-on, reset [asc/ascq=0x29/0x0], continue.
607 * INQUIRY should not yield UNIT_ATTENTION
608 * but many buggy devices do so anyway.
610 if ((driver_byte(result
) & DRIVER_SENSE
) &&
611 scsi_sense_valid(&sshdr
)) {
612 if ((sshdr
.sense_key
== UNIT_ATTENTION
) &&
613 ((sshdr
.asc
== 0x28) ||
614 (sshdr
.asc
== 0x29)) &&
620 * if nothing was transferred, we try
621 * again. It's a workaround for some USB
624 if (resid
== try_inquiry_len
)
631 sanitize_inquiry_string(&inq_result
[8], 8);
632 sanitize_inquiry_string(&inq_result
[16], 16);
633 sanitize_inquiry_string(&inq_result
[32], 4);
635 response_len
= inq_result
[4] + 5;
636 if (response_len
> 255)
637 response_len
= first_inquiry_len
; /* sanity */
640 * Get any flags for this device.
642 * XXX add a bflags to scsi_device, and replace the
643 * corresponding bit fields in scsi_device, so bflags
644 * need not be passed as an argument.
646 *bflags
= scsi_get_device_flags(sdev
, &inq_result
[8],
649 /* When the first pass succeeds we gain information about
650 * what larger transfer lengths might work. */
652 if (BLIST_INQUIRY_36
& *bflags
)
653 next_inquiry_len
= 36;
654 else if (BLIST_INQUIRY_58
& *bflags
)
655 next_inquiry_len
= 58;
656 else if (sdev
->inquiry_len
)
657 next_inquiry_len
= sdev
->inquiry_len
;
659 next_inquiry_len
= response_len
;
661 /* If more data is available perform the second pass */
662 if (next_inquiry_len
> try_inquiry_len
) {
663 try_inquiry_len
= next_inquiry_len
;
669 } else if (pass
== 2) {
670 printk(KERN_INFO
"scsi scan: %d byte inquiry failed. "
671 "Consider BLIST_INQUIRY_36 for this device\n",
674 /* If this pass failed, the third pass goes back and transfers
675 * the same amount as we successfully got in the first pass. */
676 try_inquiry_len
= first_inquiry_len
;
681 /* If the last transfer attempt got an error, assume the
682 * peripheral doesn't exist or is dead. */
686 /* Don't report any more data than the device says is valid */
687 sdev
->inquiry_len
= min(try_inquiry_len
, response_len
);
690 * XXX Abort if the response length is less than 36? If less than
691 * 32, the lookup of the device flags (above) could be invalid,
692 * and it would be possible to take an incorrect action - we do
693 * not want to hang because of a short INQUIRY. On the flip side,
694 * if the device is spun down or becoming ready (and so it gives a
695 * short INQUIRY), an abort here prevents any further use of the
696 * device, including spin up.
698 * On the whole, the best approach seems to be to assume the first
699 * 36 bytes are valid no matter what the device says. That's
700 * better than copying < 36 bytes to the inquiry-result buffer
701 * and displaying garbage for the Vendor, Product, or Revision
704 if (sdev
->inquiry_len
< 36) {
705 printk(KERN_INFO
"scsi scan: INQUIRY result too short (%d),"
706 " using 36\n", sdev
->inquiry_len
);
707 sdev
->inquiry_len
= 36;
711 * Related to the above issue:
713 * XXX Devices (disk or all?) should be sent a TEST UNIT READY,
714 * and if not ready, sent a START_STOP to start (maybe spin up) and
715 * then send the INQUIRY again, since the INQUIRY can change after
716 * a device is initialized.
718 * Ideally, start a device if explicitly asked to do so. This
719 * assumes that a device is spun up on power on, spun down on
720 * request, and then spun up on request.
724 * The scanning code needs to know the scsi_level, even if no
725 * device is attached at LUN 0 (SCSI_SCAN_TARGET_PRESENT) so
726 * non-zero LUNs can be scanned.
728 sdev
->scsi_level
= inq_result
[2] & 0x07;
729 if (sdev
->scsi_level
>= 2 ||
730 (sdev
->scsi_level
== 1 && (inq_result
[3] & 0x0f) == 1))
732 sdev
->sdev_target
->scsi_level
= sdev
->scsi_level
;
738 * scsi_add_lun - allocate and fully initialze a scsi_device
739 * @sdev: holds information to be stored in the new scsi_device
740 * @inq_result: holds the result of a previous INQUIRY to the LUN
741 * @bflags: black/white list flag
742 * @async: 1 if this device is being scanned asynchronously
745 * Initialize the scsi_device @sdev. Optionally set fields based
746 * on values in *@bflags.
749 * SCSI_SCAN_NO_RESPONSE: could not allocate or setup a scsi_device
750 * SCSI_SCAN_LUN_PRESENT: a new scsi_device was allocated and initialized
752 static int scsi_add_lun(struct scsi_device
*sdev
, unsigned char *inq_result
,
753 int *bflags
, int async
)
758 * XXX do not save the inquiry, since it can change underneath us,
759 * save just vendor/model/rev.
761 * Rather than save it and have an ioctl that retrieves the saved
762 * value, have an ioctl that executes the same INQUIRY code used
763 * in scsi_probe_lun, let user level programs doing INQUIRY
764 * scanning run at their own risk, or supply a user level program
765 * that can correctly scan.
769 * Copy at least 36 bytes of INQUIRY data, so that we don't
770 * dereference unallocated memory when accessing the Vendor,
771 * Product, and Revision strings. Badly behaved devices may set
772 * the INQUIRY Additional Length byte to a small value, indicating
773 * these strings are invalid, but often they contain plausible data
774 * nonetheless. It doesn't matter if the device sent < 36 bytes
775 * total, since scsi_probe_lun() initializes inq_result with 0s.
777 sdev
->inquiry
= kmemdup(inq_result
,
778 max_t(size_t, sdev
->inquiry_len
, 36),
780 if (sdev
->inquiry
== NULL
)
781 return SCSI_SCAN_NO_RESPONSE
;
783 sdev
->vendor
= (char *) (sdev
->inquiry
+ 8);
784 sdev
->model
= (char *) (sdev
->inquiry
+ 16);
785 sdev
->rev
= (char *) (sdev
->inquiry
+ 32);
787 if (strncmp(sdev
->vendor
, "ATA ", 8) == 0) {
789 * sata emulation layer device. This is a hack to work around
790 * the SATL power management specifications which state that
791 * when the SATL detects the device has gone into standby
792 * mode, it shall respond with NOT READY.
794 sdev
->allow_restart
= 1;
797 if (*bflags
& BLIST_ISROM
) {
798 sdev
->type
= TYPE_ROM
;
801 sdev
->type
= (inq_result
[0] & 0x1f);
802 sdev
->removable
= (inq_result
[1] & 0x80) >> 7;
805 switch (sdev
->type
) {
813 case TYPE_MEDIUM_CHANGER
:
825 printk(KERN_INFO
"scsi: unknown device type %d\n", sdev
->type
);
828 if (sdev
->type
== TYPE_RBC
|| sdev
->type
== TYPE_ROM
) {
829 /* RBC and MMC devices can return SCSI-3 compliance and yet
830 * still not support REPORT LUNS, so make them act as
831 * BLIST_NOREPORTLUN unless BLIST_REPORTLUN2 is
832 * specifically set */
833 if ((*bflags
& BLIST_REPORTLUN2
) == 0)
834 *bflags
|= BLIST_NOREPORTLUN
;
838 * For a peripheral qualifier (PQ) value of 1 (001b), the SCSI
839 * spec says: The device server is capable of supporting the
840 * specified peripheral device type on this logical unit. However,
841 * the physical device is not currently connected to this logical
844 * The above is vague, as it implies that we could treat 001 and
845 * 011 the same. Stay compatible with previous code, and create a
846 * scsi_device for a PQ of 1
848 * Don't set the device offline here; rather let the upper
849 * level drivers eval the PQ to decide whether they should
850 * attach. So remove ((inq_result[0] >> 5) & 7) == 1 check.
853 sdev
->inq_periph_qual
= (inq_result
[0] >> 5) & 7;
854 sdev
->lockable
= sdev
->removable
;
855 sdev
->soft_reset
= (inq_result
[7] & 1) && ((inq_result
[3] & 7) == 2);
857 if (sdev
->scsi_level
>= SCSI_3
||
858 (sdev
->inquiry_len
> 56 && inq_result
[56] & 0x04))
860 if (inq_result
[7] & 0x60)
862 if (inq_result
[7] & 0x10)
865 sdev_printk(KERN_NOTICE
, sdev
, "%s %.8s %.16s %.4s PQ: %d "
866 "ANSI: %d%s\n", scsi_device_type(sdev
->type
),
867 sdev
->vendor
, sdev
->model
, sdev
->rev
,
868 sdev
->inq_periph_qual
, inq_result
[2] & 0x07,
869 (inq_result
[3] & 0x0f) == 1 ? " CCS" : "");
871 if ((sdev
->scsi_level
>= SCSI_2
) && (inq_result
[7] & 2) &&
872 !(*bflags
& BLIST_NOTQ
))
873 sdev
->tagged_supported
= 1;
876 * Some devices (Texel CD ROM drives) have handshaking problems
877 * when used with the Seagate controllers. borken is initialized
878 * to 1, and then set it to 0 here.
880 if ((*bflags
& BLIST_BORKEN
) == 0)
883 if (*bflags
& BLIST_NO_ULD_ATTACH
)
884 sdev
->no_uld_attach
= 1;
887 * Apparently some really broken devices (contrary to the SCSI
888 * standards) need to be selected without asserting ATN
890 if (*bflags
& BLIST_SELECT_NO_ATN
)
891 sdev
->select_no_atn
= 1;
894 * Maximum 512 sector transfer length
895 * broken RA4x00 Compaq Disk Array
897 if (*bflags
& BLIST_MAX_512
)
898 blk_queue_max_hw_sectors(sdev
->request_queue
, 512);
901 * Some devices may not want to have a start command automatically
902 * issued when a device is added.
904 if (*bflags
& BLIST_NOSTARTONADD
)
905 sdev
->no_start_on_add
= 1;
907 if (*bflags
& BLIST_SINGLELUN
)
908 scsi_target(sdev
)->single_lun
= 1;
910 sdev
->use_10_for_rw
= 1;
912 if (*bflags
& BLIST_MS_SKIP_PAGE_08
)
913 sdev
->skip_ms_page_8
= 1;
915 if (*bflags
& BLIST_MS_SKIP_PAGE_3F
)
916 sdev
->skip_ms_page_3f
= 1;
918 if (*bflags
& BLIST_USE_10_BYTE_MS
)
919 sdev
->use_10_for_ms
= 1;
921 /* set the device running here so that slave configure
923 ret
= scsi_device_set_state(sdev
, SDEV_RUNNING
);
925 ret
= scsi_device_set_state(sdev
, SDEV_BLOCK
);
928 sdev_printk(KERN_ERR
, sdev
,
929 "in wrong state %s to complete scan\n",
930 scsi_device_state_name(sdev
->sdev_state
));
931 return SCSI_SCAN_NO_RESPONSE
;
935 if (*bflags
& BLIST_MS_192_BYTES_FOR_3F
)
936 sdev
->use_192_bytes_for_3f
= 1;
938 if (*bflags
& BLIST_NOT_LOCKABLE
)
941 if (*bflags
& BLIST_RETRY_HWERROR
)
942 sdev
->retry_hwerror
= 1;
944 if (*bflags
& BLIST_NO_DIF
)
947 sdev
->eh_timeout
= SCSI_DEFAULT_EH_TIMEOUT
;
949 if (*bflags
& BLIST_SKIP_VPD_PAGES
)
950 sdev
->skip_vpd_pages
= 1;
952 transport_configure_device(&sdev
->sdev_gendev
);
954 if (sdev
->host
->hostt
->slave_configure
) {
955 ret
= sdev
->host
->hostt
->slave_configure(sdev
);
958 * if LLDD reports slave not present, don't clutter
959 * console with alloc failure messages
962 sdev_printk(KERN_ERR
, sdev
,
963 "failed to configure device\n");
965 return SCSI_SCAN_NO_RESPONSE
;
969 if (sdev
->scsi_level
>= SCSI_3
)
970 scsi_attach_vpd(sdev
);
972 sdev
->max_queue_depth
= sdev
->queue_depth
;
975 * Ok, the device is now all set up, we can
976 * register it and tell the rest of the kernel
979 if (!async
&& scsi_sysfs_add_sdev(sdev
) != 0)
980 return SCSI_SCAN_NO_RESPONSE
;
982 return SCSI_SCAN_LUN_PRESENT
;
985 #ifdef CONFIG_SCSI_LOGGING
987 * scsi_inq_str - print INQUIRY data from min to max index, strip trailing whitespace
988 * @buf: Output buffer with at least end-first+1 bytes of space
989 * @inq: Inquiry buffer (input)
990 * @first: Offset of string into inq
991 * @end: Index after last character in inq
993 static unsigned char *scsi_inq_str(unsigned char *buf
, unsigned char *inq
,
994 unsigned first
, unsigned end
)
996 unsigned term
= 0, idx
;
998 for (idx
= 0; idx
+ first
< end
&& idx
+ first
< inq
[4] + 5; idx
++) {
999 if (inq
[idx
+first
] > ' ') {
1000 buf
[idx
] = inq
[idx
+first
];
1012 * scsi_probe_and_add_lun - probe a LUN, if a LUN is found add it
1013 * @starget: pointer to target device structure
1014 * @lun: LUN of target device
1015 * @bflagsp: store bflags here if not NULL
1016 * @sdevp: probe the LUN corresponding to this scsi_device
1017 * @rescan: if nonzero skip some code only needed on first scan
1018 * @hostdata: passed to scsi_alloc_sdev()
1021 * Call scsi_probe_lun, if a LUN with an attached device is found,
1022 * allocate and set it up by calling scsi_add_lun.
1025 * SCSI_SCAN_NO_RESPONSE: could not allocate or setup a scsi_device
1026 * SCSI_SCAN_TARGET_PRESENT: target responded, but no device is
1027 * attached at the LUN
1028 * SCSI_SCAN_LUN_PRESENT: a new scsi_device was allocated and initialized
1030 static int scsi_probe_and_add_lun(struct scsi_target
*starget
,
1031 u64 lun
, int *bflagsp
,
1032 struct scsi_device
**sdevp
, int rescan
,
1035 struct scsi_device
*sdev
;
1036 unsigned char *result
;
1037 int bflags
, res
= SCSI_SCAN_NO_RESPONSE
, result_len
= 256;
1038 struct Scsi_Host
*shost
= dev_to_shost(starget
->dev
.parent
);
1041 * The rescan flag is used as an optimization, the first scan of a
1042 * host adapter calls into here with rescan == 0.
1044 sdev
= scsi_device_lookup_by_target(starget
, lun
);
1046 if (rescan
|| !scsi_device_created(sdev
)) {
1047 SCSI_LOG_SCAN_BUS(3, printk(KERN_INFO
1048 "scsi scan: device exists on %s\n",
1049 dev_name(&sdev
->sdev_gendev
)));
1053 scsi_device_put(sdev
);
1056 *bflagsp
= scsi_get_device_flags(sdev
,
1059 return SCSI_SCAN_LUN_PRESENT
;
1061 scsi_device_put(sdev
);
1063 sdev
= scsi_alloc_sdev(starget
, lun
, hostdata
);
1067 result
= kmalloc(result_len
, GFP_ATOMIC
|
1068 ((shost
->unchecked_isa_dma
) ? __GFP_DMA
: 0));
1072 if (scsi_probe_lun(sdev
, result
, result_len
, &bflags
))
1073 goto out_free_result
;
1078 * result contains valid SCSI INQUIRY data.
1080 if (((result
[0] >> 5) == 3) && !(bflags
& BLIST_ATTACH_PQ3
)) {
1082 * For a Peripheral qualifier 3 (011b), the SCSI
1083 * spec says: The device server is not capable of
1084 * supporting a physical device on this logical
1087 * For disks, this implies that there is no
1088 * logical disk configured at sdev->lun, but there
1089 * is a target id responding.
1091 SCSI_LOG_SCAN_BUS(2, sdev_printk(KERN_INFO
, sdev
, "scsi scan:"
1092 " peripheral qualifier of 3, device not"
1095 SCSI_LOG_SCAN_BUS(1, {
1096 unsigned char vend
[9];
1097 unsigned char mod
[17];
1099 sdev_printk(KERN_INFO
, sdev
,
1100 "scsi scan: consider passing scsi_mod."
1101 "dev_flags=%s:%s:0x240 or 0x1000240\n",
1102 scsi_inq_str(vend
, result
, 8, 16),
1103 scsi_inq_str(mod
, result
, 16, 32));
1108 res
= SCSI_SCAN_TARGET_PRESENT
;
1109 goto out_free_result
;
1113 * Some targets may set slight variations of PQ and PDT to signal
1114 * that no LUN is present, so don't add sdev in these cases.
1115 * Two specific examples are:
1116 * 1) NetApp targets: return PQ=1, PDT=0x1f
1117 * 2) USB UFI: returns PDT=0x1f, with the PQ bits being "reserved"
1118 * in the UFI 1.0 spec (we cannot rely on reserved bits).
1121 * 1) SCSI SPC-3, pp. 145-146
1122 * PQ=1: "A peripheral device having the specified peripheral
1123 * device type is not connected to this logical unit. However, the
1124 * device server is capable of supporting the specified peripheral
1125 * device type on this logical unit."
1126 * PDT=0x1f: "Unknown or no device type"
1127 * 2) USB UFI 1.0, p. 20
1128 * PDT=00h Direct-access device (floppy)
1129 * PDT=1Fh none (no FDD connected to the requested logical unit)
1131 if (((result
[0] >> 5) == 1 || starget
->pdt_1f_for_no_lun
) &&
1132 (result
[0] & 0x1f) == 0x1f &&
1133 !scsi_is_wlun(lun
)) {
1134 SCSI_LOG_SCAN_BUS(3, printk(KERN_INFO
1135 "scsi scan: peripheral device type"
1136 " of 31, no device added\n"));
1137 res
= SCSI_SCAN_TARGET_PRESENT
;
1138 goto out_free_result
;
1141 res
= scsi_add_lun(sdev
, result
, &bflags
, shost
->async_scan
);
1142 if (res
== SCSI_SCAN_LUN_PRESENT
) {
1143 if (bflags
& BLIST_KEY
) {
1145 scsi_unlock_floptical(sdev
, result
);
1152 if (res
== SCSI_SCAN_LUN_PRESENT
) {
1154 if (scsi_device_get(sdev
) == 0) {
1157 __scsi_remove_device(sdev
);
1158 res
= SCSI_SCAN_NO_RESPONSE
;
1162 __scsi_remove_device(sdev
);
1168 * scsi_sequential_lun_scan - sequentially scan a SCSI target
1169 * @starget: pointer to target structure to scan
1170 * @bflags: black/white list flag for LUN 0
1171 * @scsi_level: Which version of the standard does this device adhere to
1172 * @rescan: passed to scsi_probe_add_lun()
1175 * Generally, scan from LUN 1 (LUN 0 is assumed to already have been
1176 * scanned) to some maximum lun until a LUN is found with no device
1177 * attached. Use the bflags to figure out any oddities.
1179 * Modifies sdevscan->lun.
1181 static void scsi_sequential_lun_scan(struct scsi_target
*starget
,
1182 int bflags
, int scsi_level
, int rescan
)
1185 u64 sparse_lun
, lun
;
1186 struct Scsi_Host
*shost
= dev_to_shost(starget
->dev
.parent
);
1188 SCSI_LOG_SCAN_BUS(3, printk(KERN_INFO
"scsi scan: Sequential scan of"
1189 "%s\n", dev_name(&starget
->dev
)));
1191 max_dev_lun
= min(max_scsi_luns
, shost
->max_lun
);
1193 * If this device is known to support sparse multiple units,
1194 * override the other settings, and scan all of them. Normally,
1195 * SCSI-3 devices should be scanned via the REPORT LUNS.
1197 if (bflags
& BLIST_SPARSELUN
) {
1198 max_dev_lun
= shost
->max_lun
;
1204 * If less than SCSI_1_CSS, and no special lun scaning, stop
1205 * scanning; this matches 2.4 behaviour, but could just be a bug
1206 * (to continue scanning a SCSI_1_CSS device).
1208 * This test is broken. We might not have any device on lun0 for
1209 * a sparselun device, and if that's the case then how would we
1210 * know the real scsi_level, eh? It might make sense to just not
1211 * scan any SCSI_1 device for non-0 luns, but that check would best
1212 * go into scsi_alloc_sdev() and just have it return null when asked
1213 * to alloc an sdev for lun > 0 on an already found SCSI_1 device.
1215 if ((sdevscan->scsi_level < SCSI_1_CCS) &&
1216 ((bflags & (BLIST_FORCELUN | BLIST_SPARSELUN | BLIST_MAX5LUN))
1221 * If this device is known to support multiple units, override
1222 * the other settings, and scan all of them.
1224 if (bflags
& BLIST_FORCELUN
)
1225 max_dev_lun
= shost
->max_lun
;
1227 * REGAL CDC-4X: avoid hang after LUN 4
1229 if (bflags
& BLIST_MAX5LUN
)
1230 max_dev_lun
= min(5U, max_dev_lun
);
1232 * Do not scan SCSI-2 or lower device past LUN 7, unless
1235 if (scsi_level
< SCSI_3
&& !(bflags
& BLIST_LARGELUN
))
1236 max_dev_lun
= min(8U, max_dev_lun
);
1239 * Stop scanning at 255 unless BLIST_SCSI3LUN
1241 if (!(bflags
& BLIST_SCSI3LUN
))
1242 max_dev_lun
= min(256U, max_dev_lun
);
1245 * We have already scanned LUN 0, so start at LUN 1. Keep scanning
1246 * until we reach the max, or no LUN is found and we are not
1249 for (lun
= 1; lun
< max_dev_lun
; ++lun
)
1250 if ((scsi_probe_and_add_lun(starget
, lun
, NULL
, NULL
, rescan
,
1251 NULL
) != SCSI_SCAN_LUN_PRESENT
) &&
1257 * scsilun_to_int - convert a scsi_lun to an int
1258 * @scsilun: struct scsi_lun to be converted.
1261 * Convert @scsilun from a struct scsi_lun to a four byte host byte-ordered
1262 * integer, and return the result. The caller must check for
1263 * truncation before using this function.
1266 * The struct scsi_lun is assumed to be four levels, with each level
1267 * effectively containing a SCSI byte-ordered (big endian) short; the
1268 * addressing bits of each level are ignored (the highest two bits).
1269 * For a description of the LUN format, post SCSI-3 see the SCSI
1270 * Architecture Model, for SCSI-3 see the SCSI Controller Commands.
1272 * Given a struct scsi_lun of: 0a 04 0b 03 00 00 00 00, this function returns
1273 * the integer: 0x0b030a04
1275 u64
scsilun_to_int(struct scsi_lun
*scsilun
)
1281 for (i
= 0; i
< sizeof(lun
); i
+= 2)
1282 lun
= lun
| (((scsilun
->scsi_lun
[i
] << 8) |
1283 scsilun
->scsi_lun
[i
+ 1]) << (i
* 8));
1286 EXPORT_SYMBOL(scsilun_to_int
);
1289 * int_to_scsilun - reverts an int into a scsi_lun
1290 * @lun: integer to be reverted
1291 * @scsilun: struct scsi_lun to be set.
1294 * Reverts the functionality of the scsilun_to_int, which packed
1295 * an 8-byte lun value into an int. This routine unpacks the int
1296 * back into the lun value.
1297 * Note: the scsilun_to_int() routine does not truly handle all
1298 * 8bytes of the lun value. This functions restores only as much
1299 * as was set by the routine.
1302 * Given an integer : 0x0b030a04, this function returns a
1303 * scsi_lun of : struct scsi_lun of: 0a 04 0b 03 00 00 00 00
1306 void int_to_scsilun(u64 lun
, struct scsi_lun
*scsilun
)
1310 memset(scsilun
->scsi_lun
, 0, sizeof(scsilun
->scsi_lun
));
1312 for (i
= 0; i
< sizeof(lun
); i
+= 2) {
1313 scsilun
->scsi_lun
[i
] = (lun
>> 8) & 0xFF;
1314 scsilun
->scsi_lun
[i
+1] = lun
& 0xFF;
1318 EXPORT_SYMBOL(int_to_scsilun
);
1321 * scsi_report_lun_scan - Scan using SCSI REPORT LUN results
1322 * @starget: which target
1323 * @bflags: Zero or a mix of BLIST_NOLUN, BLIST_REPORTLUN2, or BLIST_NOREPORTLUN
1324 * @rescan: nonzero if we can skip code only needed on first scan
1327 * Fast scanning for modern (SCSI-3) devices by sending a REPORT LUN command.
1328 * Scan the resulting list of LUNs by calling scsi_probe_and_add_lun.
1330 * If BLINK_REPORTLUN2 is set, scan a target that supports more than 8
1331 * LUNs even if it's older than SCSI-3.
1332 * If BLIST_NOREPORTLUN is set, return 1 always.
1333 * If BLIST_NOLUN is set, return 0 always.
1334 * If starget->no_report_luns is set, return 1 always.
1337 * 0: scan completed (or no memory, so further scanning is futile)
1338 * 1: could not scan with REPORT LUN
1340 static int scsi_report_lun_scan(struct scsi_target
*starget
, int bflags
,
1344 unsigned char scsi_cmd
[MAX_COMMAND_SIZE
];
1345 unsigned int length
;
1347 unsigned int num_luns
;
1348 unsigned int retries
;
1350 struct scsi_lun
*lunp
, *lun_data
;
1352 struct scsi_sense_hdr sshdr
;
1353 struct scsi_device
*sdev
;
1354 struct Scsi_Host
*shost
= dev_to_shost(&starget
->dev
);
1358 * Only support SCSI-3 and up devices if BLIST_NOREPORTLUN is not set.
1359 * Also allow SCSI-2 if BLIST_REPORTLUN2 is set and host adapter does
1360 * support more than 8 LUNs.
1361 * Don't attempt if the target doesn't support REPORT LUNS.
1363 if (bflags
& BLIST_NOREPORTLUN
)
1365 if (starget
->scsi_level
< SCSI_2
&&
1366 starget
->scsi_level
!= SCSI_UNKNOWN
)
1368 if (starget
->scsi_level
< SCSI_3
&&
1369 (!(bflags
& BLIST_REPORTLUN2
) || shost
->max_lun
<= 8))
1371 if (bflags
& BLIST_NOLUN
)
1373 if (starget
->no_report_luns
)
1376 if (!(sdev
= scsi_device_lookup_by_target(starget
, 0))) {
1377 sdev
= scsi_alloc_sdev(starget
, 0, NULL
);
1380 if (scsi_device_get(sdev
)) {
1381 __scsi_remove_device(sdev
);
1386 sprintf(devname
, "host %d channel %d id %d",
1387 shost
->host_no
, sdev
->channel
, sdev
->id
);
1390 * Allocate enough to hold the header (the same size as one scsi_lun)
1391 * plus the max number of luns we are requesting.
1393 * Reallocating and trying again (with the exact amount we need)
1394 * would be nice, but then we need to somehow limit the size
1395 * allocated based on the available memory and the limits of
1396 * kmalloc - we don't want a kmalloc() failure of a huge value to
1397 * prevent us from finding any LUNs on this target.
1399 length
= (max_scsi_report_luns
+ 1) * sizeof(struct scsi_lun
);
1400 lun_data
= kmalloc(length
, GFP_ATOMIC
|
1401 (sdev
->host
->unchecked_isa_dma
? __GFP_DMA
: 0));
1403 printk(ALLOC_FAILURE_MSG
, __func__
);
1407 scsi_cmd
[0] = REPORT_LUNS
;
1410 * bytes 1 - 5: reserved, set to zero.
1412 memset(&scsi_cmd
[1], 0, 5);
1415 * bytes 6 - 9: length of the command.
1417 scsi_cmd
[6] = (unsigned char) (length
>> 24) & 0xff;
1418 scsi_cmd
[7] = (unsigned char) (length
>> 16) & 0xff;
1419 scsi_cmd
[8] = (unsigned char) (length
>> 8) & 0xff;
1420 scsi_cmd
[9] = (unsigned char) length
& 0xff;
1422 scsi_cmd
[10] = 0; /* reserved */
1423 scsi_cmd
[11] = 0; /* control */
1426 * We can get a UNIT ATTENTION, for example a power on/reset, so
1427 * retry a few times (like sd.c does for TEST UNIT READY).
1428 * Experience shows some combinations of adapter/devices get at
1429 * least two power on/resets.
1431 * Illegal requests (for devices that do not support REPORT LUNS)
1432 * should come through as a check condition, and will not generate
1435 for (retries
= 0; retries
< 3; retries
++) {
1436 SCSI_LOG_SCAN_BUS(3, printk (KERN_INFO
"scsi scan: Sending"
1437 " REPORT LUNS to %s (try %d)\n", devname
,
1440 result
= scsi_execute_req(sdev
, scsi_cmd
, DMA_FROM_DEVICE
,
1441 lun_data
, length
, &sshdr
,
1442 SCSI_TIMEOUT
+ 4 * HZ
, 3, NULL
);
1444 SCSI_LOG_SCAN_BUS(3, printk (KERN_INFO
"scsi scan: REPORT LUNS"
1445 " %s (try %d) result 0x%x\n", result
1446 ? "failed" : "successful", retries
, result
));
1449 else if (scsi_sense_valid(&sshdr
)) {
1450 if (sshdr
.sense_key
!= UNIT_ATTENTION
)
1457 * The device probably does not support a REPORT LUN command
1464 * Get the length from the first four bytes of lun_data.
1466 data
= (u8
*) lun_data
->scsi_lun
;
1467 length
= ((data
[0] << 24) | (data
[1] << 16) |
1468 (data
[2] << 8) | (data
[3] << 0));
1470 num_luns
= (length
/ sizeof(struct scsi_lun
));
1471 if (num_luns
> max_scsi_report_luns
) {
1472 printk(KERN_WARNING
"scsi: On %s only %d (max_scsi_report_luns)"
1473 " of %d luns reported, try increasing"
1474 " max_scsi_report_luns.\n", devname
,
1475 max_scsi_report_luns
, num_luns
);
1476 num_luns
= max_scsi_report_luns
;
1479 SCSI_LOG_SCAN_BUS(3, sdev_printk (KERN_INFO
, sdev
,
1480 "scsi scan: REPORT LUN scan\n"));
1483 * Scan the luns in lun_data. The entry at offset 0 is really
1484 * the header, so start at 1 and go up to and including num_luns.
1486 for (lunp
= &lun_data
[1]; lunp
<= &lun_data
[num_luns
]; lunp
++) {
1487 lun
= scsilun_to_int(lunp
);
1489 if (lun
> sdev
->host
->max_lun
) {
1490 printk(KERN_WARNING
"scsi: %s lun%llu has a LUN larger"
1491 " than allowed by the host adapter\n",
1496 res
= scsi_probe_and_add_lun(starget
,
1497 lun
, NULL
, NULL
, rescan
, NULL
);
1498 if (res
== SCSI_SCAN_NO_RESPONSE
) {
1500 * Got some results, but now none, abort.
1502 sdev_printk(KERN_ERR
, sdev
,
1503 "Unexpected response"
1504 " from lun %llu while scanning, scan"
1505 " aborted\n", (unsigned long long)lun
);
1514 scsi_device_put(sdev
);
1515 if (scsi_device_created(sdev
))
1517 * the sdev we used didn't appear in the report luns scan
1519 __scsi_remove_device(sdev
);
1523 struct scsi_device
*__scsi_add_device(struct Scsi_Host
*shost
, uint channel
,
1524 uint id
, u64 lun
, void *hostdata
)
1526 struct scsi_device
*sdev
= ERR_PTR(-ENODEV
);
1527 struct device
*parent
= &shost
->shost_gendev
;
1528 struct scsi_target
*starget
;
1530 if (strncmp(scsi_scan_type
, "none", 4) == 0)
1531 return ERR_PTR(-ENODEV
);
1533 starget
= scsi_alloc_target(parent
, channel
, id
);
1535 return ERR_PTR(-ENOMEM
);
1536 scsi_autopm_get_target(starget
);
1538 mutex_lock(&shost
->scan_mutex
);
1539 if (!shost
->async_scan
)
1540 scsi_complete_async_scans();
1542 if (scsi_host_scan_allowed(shost
) && scsi_autopm_get_host(shost
) == 0) {
1543 scsi_probe_and_add_lun(starget
, lun
, NULL
, &sdev
, 1, hostdata
);
1544 scsi_autopm_put_host(shost
);
1546 mutex_unlock(&shost
->scan_mutex
);
1547 scsi_autopm_put_target(starget
);
1549 * paired with scsi_alloc_target(). Target will be destroyed unless
1550 * scsi_probe_and_add_lun made an underlying device visible
1552 scsi_target_reap(starget
);
1553 put_device(&starget
->dev
);
1557 EXPORT_SYMBOL(__scsi_add_device
);
1559 int scsi_add_device(struct Scsi_Host
*host
, uint channel
,
1560 uint target
, u64 lun
)
1562 struct scsi_device
*sdev
=
1563 __scsi_add_device(host
, channel
, target
, lun
, NULL
);
1565 return PTR_ERR(sdev
);
1567 scsi_device_put(sdev
);
1570 EXPORT_SYMBOL(scsi_add_device
);
1572 void scsi_rescan_device(struct device
*dev
)
1574 struct scsi_driver
*drv
;
1579 drv
= to_scsi_driver(dev
->driver
);
1580 if (try_module_get(drv
->owner
)) {
1583 module_put(drv
->owner
);
1586 EXPORT_SYMBOL(scsi_rescan_device
);
1588 static void __scsi_scan_target(struct device
*parent
, unsigned int channel
,
1589 unsigned int id
, u64 lun
, int rescan
)
1591 struct Scsi_Host
*shost
= dev_to_shost(parent
);
1594 struct scsi_target
*starget
;
1596 if (shost
->this_id
== id
)
1598 * Don't scan the host adapter
1602 starget
= scsi_alloc_target(parent
, channel
, id
);
1605 scsi_autopm_get_target(starget
);
1607 if (lun
!= SCAN_WILD_CARD
) {
1609 * Scan for a specific host/chan/id/lun.
1611 scsi_probe_and_add_lun(starget
, lun
, NULL
, NULL
, rescan
, NULL
);
1616 * Scan LUN 0, if there is some response, scan further. Ideally, we
1617 * would not configure LUN 0 until all LUNs are scanned.
1619 res
= scsi_probe_and_add_lun(starget
, 0, &bflags
, NULL
, rescan
, NULL
);
1620 if (res
== SCSI_SCAN_LUN_PRESENT
|| res
== SCSI_SCAN_TARGET_PRESENT
) {
1621 if (scsi_report_lun_scan(starget
, bflags
, rescan
) != 0)
1623 * The REPORT LUN did not scan the target,
1624 * do a sequential scan.
1626 scsi_sequential_lun_scan(starget
, bflags
,
1627 starget
->scsi_level
, rescan
);
1631 scsi_autopm_put_target(starget
);
1633 * paired with scsi_alloc_target(): determine if the target has
1634 * any children at all and if not, nuke it
1636 scsi_target_reap(starget
);
1638 put_device(&starget
->dev
);
1642 * scsi_scan_target - scan a target id, possibly including all LUNs on the target.
1643 * @parent: host to scan
1644 * @channel: channel to scan
1645 * @id: target id to scan
1646 * @lun: Specific LUN to scan or SCAN_WILD_CARD
1647 * @rescan: passed to LUN scanning routines
1650 * Scan the target id on @parent, @channel, and @id. Scan at least LUN 0,
1651 * and possibly all LUNs on the target id.
1653 * First try a REPORT LUN scan, if that does not scan the target, do a
1654 * sequential scan of LUNs on the target id.
1656 void scsi_scan_target(struct device
*parent
, unsigned int channel
,
1657 unsigned int id
, u64 lun
, int rescan
)
1659 struct Scsi_Host
*shost
= dev_to_shost(parent
);
1661 if (strncmp(scsi_scan_type
, "none", 4) == 0)
1664 mutex_lock(&shost
->scan_mutex
);
1665 if (!shost
->async_scan
)
1666 scsi_complete_async_scans();
1668 if (scsi_host_scan_allowed(shost
) && scsi_autopm_get_host(shost
) == 0) {
1669 __scsi_scan_target(parent
, channel
, id
, lun
, rescan
);
1670 scsi_autopm_put_host(shost
);
1672 mutex_unlock(&shost
->scan_mutex
);
1674 EXPORT_SYMBOL(scsi_scan_target
);
1676 static void scsi_scan_channel(struct Scsi_Host
*shost
, unsigned int channel
,
1677 unsigned int id
, u64 lun
, int rescan
)
1681 if (id
== SCAN_WILD_CARD
)
1682 for (id
= 0; id
< shost
->max_id
; ++id
) {
1684 * XXX adapter drivers when possible (FCP, iSCSI)
1685 * could modify max_id to match the current max,
1686 * not the absolute max.
1688 * XXX add a shost id iterator, so for example,
1689 * the FC ID can be the same as a target id
1690 * without a huge overhead of sparse id's.
1692 if (shost
->reverse_ordering
)
1694 * Scan from high to low id.
1696 order_id
= shost
->max_id
- id
- 1;
1699 __scsi_scan_target(&shost
->shost_gendev
, channel
,
1700 order_id
, lun
, rescan
);
1703 __scsi_scan_target(&shost
->shost_gendev
, channel
,
1707 int scsi_scan_host_selected(struct Scsi_Host
*shost
, unsigned int channel
,
1708 unsigned int id
, u64 lun
, int rescan
)
1710 SCSI_LOG_SCAN_BUS(3, shost_printk (KERN_INFO
, shost
,
1711 "%s: <%u:%u:%llu>\n",
1712 __func__
, channel
, id
, lun
));
1714 if (((channel
!= SCAN_WILD_CARD
) && (channel
> shost
->max_channel
)) ||
1715 ((id
!= SCAN_WILD_CARD
) && (id
>= shost
->max_id
)) ||
1716 ((lun
!= SCAN_WILD_CARD
) && (lun
> shost
->max_lun
)))
1719 mutex_lock(&shost
->scan_mutex
);
1720 if (!shost
->async_scan
)
1721 scsi_complete_async_scans();
1723 if (scsi_host_scan_allowed(shost
) && scsi_autopm_get_host(shost
) == 0) {
1724 if (channel
== SCAN_WILD_CARD
)
1725 for (channel
= 0; channel
<= shost
->max_channel
;
1727 scsi_scan_channel(shost
, channel
, id
, lun
,
1730 scsi_scan_channel(shost
, channel
, id
, lun
, rescan
);
1731 scsi_autopm_put_host(shost
);
1733 mutex_unlock(&shost
->scan_mutex
);
1738 static void scsi_sysfs_add_devices(struct Scsi_Host
*shost
)
1740 struct scsi_device
*sdev
;
1741 shost_for_each_device(sdev
, shost
) {
1742 /* target removed before the device could be added */
1743 if (sdev
->sdev_state
== SDEV_DEL
)
1745 if (!scsi_host_scan_allowed(shost
) ||
1746 scsi_sysfs_add_sdev(sdev
) != 0)
1747 __scsi_remove_device(sdev
);
1752 * scsi_prep_async_scan - prepare for an async scan
1753 * @shost: the host which will be scanned
1754 * Returns: a cookie to be passed to scsi_finish_async_scan()
1756 * Tells the midlayer this host is going to do an asynchronous scan.
1757 * It reserves the host's position in the scanning list and ensures
1758 * that other asynchronous scans started after this one won't affect the
1759 * ordering of the discovered devices.
1761 static struct async_scan_data
*scsi_prep_async_scan(struct Scsi_Host
*shost
)
1763 struct async_scan_data
*data
;
1764 unsigned long flags
;
1766 if (strncmp(scsi_scan_type
, "sync", 4) == 0)
1769 if (shost
->async_scan
) {
1770 printk("%s called twice for host %d", __func__
,
1776 data
= kmalloc(sizeof(*data
), GFP_KERNEL
);
1779 data
->shost
= scsi_host_get(shost
);
1782 init_completion(&data
->prev_finished
);
1784 mutex_lock(&shost
->scan_mutex
);
1785 spin_lock_irqsave(shost
->host_lock
, flags
);
1786 shost
->async_scan
= 1;
1787 spin_unlock_irqrestore(shost
->host_lock
, flags
);
1788 mutex_unlock(&shost
->scan_mutex
);
1790 spin_lock(&async_scan_lock
);
1791 if (list_empty(&scanning_hosts
))
1792 complete(&data
->prev_finished
);
1793 list_add_tail(&data
->list
, &scanning_hosts
);
1794 spin_unlock(&async_scan_lock
);
1804 * scsi_finish_async_scan - asynchronous scan has finished
1805 * @data: cookie returned from earlier call to scsi_prep_async_scan()
1807 * All the devices currently attached to this host have been found.
1808 * This function announces all the devices it has found to the rest
1811 static void scsi_finish_async_scan(struct async_scan_data
*data
)
1813 struct Scsi_Host
*shost
;
1814 unsigned long flags
;
1819 shost
= data
->shost
;
1821 mutex_lock(&shost
->scan_mutex
);
1823 if (!shost
->async_scan
) {
1824 printk("%s called twice for host %d", __func__
,
1827 mutex_unlock(&shost
->scan_mutex
);
1831 wait_for_completion(&data
->prev_finished
);
1833 scsi_sysfs_add_devices(shost
);
1835 spin_lock_irqsave(shost
->host_lock
, flags
);
1836 shost
->async_scan
= 0;
1837 spin_unlock_irqrestore(shost
->host_lock
, flags
);
1839 mutex_unlock(&shost
->scan_mutex
);
1841 spin_lock(&async_scan_lock
);
1842 list_del(&data
->list
);
1843 if (!list_empty(&scanning_hosts
)) {
1844 struct async_scan_data
*next
= list_entry(scanning_hosts
.next
,
1845 struct async_scan_data
, list
);
1846 complete(&next
->prev_finished
);
1848 spin_unlock(&async_scan_lock
);
1850 scsi_autopm_put_host(shost
);
1851 scsi_host_put(shost
);
1855 static void do_scsi_scan_host(struct Scsi_Host
*shost
)
1857 if (shost
->hostt
->scan_finished
) {
1858 unsigned long start
= jiffies
;
1859 if (shost
->hostt
->scan_start
)
1860 shost
->hostt
->scan_start(shost
);
1862 while (!shost
->hostt
->scan_finished(shost
, jiffies
- start
))
1865 scsi_scan_host_selected(shost
, SCAN_WILD_CARD
, SCAN_WILD_CARD
,
1870 static void do_scan_async(void *_data
, async_cookie_t c
)
1872 struct async_scan_data
*data
= _data
;
1873 struct Scsi_Host
*shost
= data
->shost
;
1875 do_scsi_scan_host(shost
);
1876 scsi_finish_async_scan(data
);
1880 * scsi_scan_host - scan the given adapter
1881 * @shost: adapter to scan
1883 void scsi_scan_host(struct Scsi_Host
*shost
)
1885 struct async_scan_data
*data
;
1887 if (strncmp(scsi_scan_type
, "none", 4) == 0)
1889 if (scsi_autopm_get_host(shost
) < 0)
1892 data
= scsi_prep_async_scan(shost
);
1894 do_scsi_scan_host(shost
);
1895 scsi_autopm_put_host(shost
);
1899 /* register with the async subsystem so wait_for_device_probe()
1900 * will flush this work
1902 async_schedule(do_scan_async
, data
);
1904 /* scsi_autopm_put_host(shost) is called in scsi_finish_async_scan() */
1906 EXPORT_SYMBOL(scsi_scan_host
);
1908 void scsi_forget_host(struct Scsi_Host
*shost
)
1910 struct scsi_device
*sdev
;
1911 unsigned long flags
;
1914 spin_lock_irqsave(shost
->host_lock
, flags
);
1915 list_for_each_entry(sdev
, &shost
->__devices
, siblings
) {
1916 if (sdev
->sdev_state
== SDEV_DEL
)
1918 spin_unlock_irqrestore(shost
->host_lock
, flags
);
1919 __scsi_remove_device(sdev
);
1922 spin_unlock_irqrestore(shost
->host_lock
, flags
);
1926 * scsi_get_host_dev - Create a scsi_device that points to the host adapter itself
1927 * @shost: Host that needs a scsi_device
1929 * Lock status: None assumed.
1931 * Returns: The scsi_device or NULL
1934 * Attach a single scsi_device to the Scsi_Host - this should
1935 * be made to look like a "pseudo-device" that points to the
1938 * Note - this device is not accessible from any high-level
1939 * drivers (including generics), which is probably not
1940 * optimal. We can add hooks later to attach.
1942 struct scsi_device
*scsi_get_host_dev(struct Scsi_Host
*shost
)
1944 struct scsi_device
*sdev
= NULL
;
1945 struct scsi_target
*starget
;
1947 mutex_lock(&shost
->scan_mutex
);
1948 if (!scsi_host_scan_allowed(shost
))
1950 starget
= scsi_alloc_target(&shost
->shost_gendev
, 0, shost
->this_id
);
1954 sdev
= scsi_alloc_sdev(starget
, 0, NULL
);
1958 scsi_target_reap(starget
);
1959 put_device(&starget
->dev
);
1961 mutex_unlock(&shost
->scan_mutex
);
1964 EXPORT_SYMBOL(scsi_get_host_dev
);
1967 * scsi_free_host_dev - Free a scsi_device that points to the host adapter itself
1968 * @sdev: Host device to be freed
1970 * Lock status: None assumed.
1974 void scsi_free_host_dev(struct scsi_device
*sdev
)
1976 BUG_ON(sdev
->id
!= sdev
->host
->this_id
);
1978 __scsi_remove_device(sdev
);
1980 EXPORT_SYMBOL(scsi_free_host_dev
);