projects / deliverable / linux.git / blob
? search:
summary | shortlog | log | commit | commitdiff | tree
blame | history | raw | HEAD
drm: Make drm_local_map use a resource_size_t offset
[deliverable/linux.git] / drivers / serial / bfin_5xx.c
1 /*
2 * Blackfin On-Chip Serial Driver
3 *
4 * Copyright 2006-2008 Analog Devices Inc.
5 *
6 * Enter bugs at http://blackfin.uclinux.org/
7 *
8 * Licensed under the GPL-2 or later.
9 */
10
11 #if defined(CONFIG_SERIAL_BFIN_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
12 #define SUPPORT_SYSRQ
13 #endif
14
15 #include <linux/module.h>
16 #include <linux/ioport.h>
17 #include <linux/init.h>
18 #include <linux/console.h>
19 #include <linux/sysrq.h>
20 #include <linux/platform_device.h>
21 #include <linux/tty.h>
22 #include <linux/tty_flip.h>
23 #include <linux/serial_core.h>
24
25 #if defined(CONFIG_KGDB_SERIAL_CONSOLE) || \
26 defined(CONFIG_KGDB_SERIAL_CONSOLE_MODULE)
27 #include <linux/kgdb.h>
28 #include <asm/irq_regs.h>
29 #endif
30
31 #include <asm/gpio.h>
32 #include <mach/bfin_serial_5xx.h>
33
34 #ifdef CONFIG_SERIAL_BFIN_DMA
35 #include <linux/dma-mapping.h>
36 #include <asm/io.h>
37 #include <asm/irq.h>
38 #include <asm/cacheflush.h>
39 #endif
40
41 /* UART name and device definitions */
42 #define BFIN_SERIAL_NAME "ttyBF"
43 #define BFIN_SERIAL_MAJOR 204
44 #define BFIN_SERIAL_MINOR 64
45
46 static struct bfin_serial_port bfin_serial_ports[BFIN_UART_NR_PORTS];
47 static int nr_active_ports = ARRAY_SIZE(bfin_serial_resource);
48
49 #if defined(CONFIG_KGDB_SERIAL_CONSOLE) || \
50 defined(CONFIG_KGDB_SERIAL_CONSOLE_MODULE)
51
52 # ifndef CONFIG_SERIAL_BFIN_PIO
53 # error KGDB only support UART in PIO mode.
54 # endif
55
56 static int kgdboc_port_line;
57 static int kgdboc_break_enabled;
58 #endif
59 /*
60 * Setup for console. Argument comes from the menuconfig
61 */
62 #define DMA_RX_XCOUNT 512
63 #define DMA_RX_YCOUNT (PAGE_SIZE / DMA_RX_XCOUNT)
64
65 #define DMA_RX_FLUSH_JIFFIES (HZ / 50)
66 #define CTS_CHECK_JIFFIES (HZ / 50)
67
68 #ifdef CONFIG_SERIAL_BFIN_DMA
69 static void bfin_serial_dma_tx_chars(struct bfin_serial_port *uart);
70 #else
71 static void bfin_serial_tx_chars(struct bfin_serial_port *uart);
72 #endif
73
74 static void bfin_serial_mctrl_check(struct bfin_serial_port *uart);
75
76 static void bfin_serial_reset_irda(struct uart_port *port);
77
78 /*
79 * interrupts are disabled on entry
80 */
81 static void bfin_serial_stop_tx(struct uart_port *port)
82 {
83 struct bfin_serial_port *uart = (struct bfin_serial_port *)port;
84 #ifdef CONFIG_SERIAL_BFIN_DMA
85 struct circ_buf *xmit = &uart->port.info->xmit;
86 #endif
87
88 while (!(UART_GET_LSR(uart) & TEMT))
89 cpu_relax();
90
91 #ifdef CONFIG_SERIAL_BFIN_DMA
92 disable_dma(uart->tx_dma_channel);
93 xmit->tail = (xmit->tail + uart->tx_count) & (UART_XMIT_SIZE - 1);
94 uart->port.icount.tx += uart->tx_count;
95 uart->tx_count = 0;
96 uart->tx_done = 1;
97 #else
98 #ifdef CONFIG_BF54x
99 /* Clear TFI bit */
100 UART_PUT_LSR(uart, TFI);
101 #endif
102 UART_CLEAR_IER(uart, ETBEI);
103 #endif
104 }
105
106 /*
107 * port is locked and interrupts are disabled
108 */
109 static void bfin_serial_start_tx(struct uart_port *port)
110 {
111 struct bfin_serial_port *uart = (struct bfin_serial_port *)port;
112 struct tty_struct *tty = uart->port.info->port.tty;
113
114 /*
115 * To avoid losting RX interrupt, we reset IR function
116 * before sending data.
117 */
118 if (tty->termios->c_line == N_IRDA)
119 bfin_serial_reset_irda(port);
120
121 #ifdef CONFIG_SERIAL_BFIN_DMA
122 if (uart->tx_done)
123 bfin_serial_dma_tx_chars(uart);
124 #else
125 UART_SET_IER(uart, ETBEI);
126 bfin_serial_tx_chars(uart);
127 #endif
128 }
129
130 /*
131 * Interrupts are enabled
132 */
133 static void bfin_serial_stop_rx(struct uart_port *port)
134 {
135 struct bfin_serial_port *uart = (struct bfin_serial_port *)port;
136
137 UART_CLEAR_IER(uart, ERBFI);
138 }
139
140 /*
141 * Set the modem control timer to fire immediately.
142 */
143 static void bfin_serial_enable_ms(struct uart_port *port)
144 {
145 }
146
147
148 #if ANOMALY_05000363 && defined(CONFIG_SERIAL_BFIN_PIO)
149 # define UART_GET_ANOMALY_THRESHOLD(uart) ((uart)->anomaly_threshold)
150 # define UART_SET_ANOMALY_THRESHOLD(uart, v) ((uart)->anomaly_threshold = (v))
151 #else
152 # define UART_GET_ANOMALY_THRESHOLD(uart) 0
153 # define UART_SET_ANOMALY_THRESHOLD(uart, v)
154 #endif
155
156 #ifdef CONFIG_SERIAL_BFIN_PIO
157 static void bfin_serial_rx_chars(struct bfin_serial_port *uart)
158 {
159 struct tty_struct *tty = NULL;
160 unsigned int status, ch, flg;
161 static struct timeval anomaly_start = { .tv_sec = 0 };
162
163 status = UART_GET_LSR(uart);
164 UART_CLEAR_LSR(uart);
165
166 ch = UART_GET_CHAR(uart);
167 uart->port.icount.rx++;
168
169 #if defined(CONFIG_KGDB_SERIAL_CONSOLE) || \
170 defined(CONFIG_KGDB_SERIAL_CONSOLE_MODULE)
171 if (kgdb_connected && kgdboc_port_line == uart->port.line)
172 if (ch == 0x3) {/* Ctrl + C */
173 kgdb_breakpoint();
174 return;
175 }
176
177 if (!uart->port.info || !uart->port.info->tty)
178 return;
179 #endif
180 tty = uart->port.info->tty;
181
182 if (ANOMALY_05000363) {
183 /* The BF533 (and BF561) family of processors have a nice anomaly
184 * where they continuously generate characters for a "single" break.
185 * We have to basically ignore this flood until the "next" valid
186 * character comes across. Due to the nature of the flood, it is
187 * not possible to reliably catch bytes that are sent too quickly
188 * after this break. So application code talking to the Blackfin
189 * which sends a break signal must allow at least 1.5 character
190 * times after the end of the break for things to stabilize. This
191 * timeout was picked as it must absolutely be larger than 1
192 * character time +/- some percent. So 1.5 sounds good. All other
193 * Blackfin families operate properly. Woo.
194 */
195 if (anomaly_start.tv_sec) {
196 struct timeval curr;
197 suseconds_t usecs;
198
199 if ((~ch & (~ch + 1)) & 0xff)
200 goto known_good_char;
201
202 do_gettimeofday(&curr);
203 if (curr.tv_sec - anomaly_start.tv_sec > 1)
204 goto known_good_char;
205
206 usecs = 0;
207 if (curr.tv_sec != anomaly_start.tv_sec)
208 usecs += USEC_PER_SEC;
209 usecs += curr.tv_usec - anomaly_start.tv_usec;
210
211 if (usecs > UART_GET_ANOMALY_THRESHOLD(uart))
212 goto known_good_char;
213
214 if (ch)
215 anomaly_start.tv_sec = 0;
216 else
217 anomaly_start = curr;
218
219 return;
220
221 known_good_char:
222 status &= ~BI;
223 anomaly_start.tv_sec = 0;
224 }
225 }
226
227 if (status & BI) {
228 if (ANOMALY_05000363)
229 if (bfin_revid() < 5)
230 do_gettimeofday(&anomaly_start);
231 uart->port.icount.brk++;
232 if (uart_handle_break(&uart->port))
233 goto ignore_char;
234 status &= ~(PE | FE);
235 }
236 if (status & PE)
237 uart->port.icount.parity++;
238 if (status & OE)
239 uart->port.icount.overrun++;
240 if (status & FE)
241 uart->port.icount.frame++;
242
243 status &= uart->port.read_status_mask;
244
245 if (status & BI)
246 flg = TTY_BREAK;
247 else if (status & PE)
248 flg = TTY_PARITY;
249 else if (status & FE)
250 flg = TTY_FRAME;
251 else
252 flg = TTY_NORMAL;
253
254 if (uart_handle_sysrq_char(&uart->port, ch))
255 goto ignore_char;
256
257 uart_insert_char(&uart->port, status, OE, ch, flg);
258
259 ignore_char:
260 tty_flip_buffer_push(tty);
261 }
262
263 static void bfin_serial_tx_chars(struct bfin_serial_port *uart)
264 {
265 struct circ_buf *xmit = &uart->port.info->xmit;
266
267 /*
268 * Check the modem control lines before
269 * transmitting anything.
270 */
271 bfin_serial_mctrl_check(uart);
272
273 if (uart_circ_empty(xmit) || uart_tx_stopped(&uart->port)) {
274 #ifdef CONFIG_BF54x
275 /* Clear TFI bit */
276 UART_PUT_LSR(uart, TFI);
277 #endif
278 UART_CLEAR_IER(uart, ETBEI);
279 return;
280 }
281
282 if (uart->port.x_char) {
283 UART_PUT_CHAR(uart, uart->port.x_char);
284 uart->port.icount.tx++;
285 uart->port.x_char = 0;
286 }
287
288 while ((UART_GET_LSR(uart) & THRE) && xmit->tail != xmit->head) {
289 UART_PUT_CHAR(uart, xmit->buf[xmit->tail]);
290 xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
291 uart->port.icount.tx++;
292 SSYNC();
293 }
294
295 if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
296 uart_write_wakeup(&uart->port);
297 }
298
299 static irqreturn_t bfin_serial_rx_int(int irq, void *dev_id)
300 {
301 struct bfin_serial_port *uart = dev_id;
302
303 spin_lock(&uart->port.lock);
304 while (UART_GET_LSR(uart) & DR)
305 bfin_serial_rx_chars(uart);
306 spin_unlock(&uart->port.lock);
307
308 return IRQ_HANDLED;
309 }
310
311 static irqreturn_t bfin_serial_tx_int(int irq, void *dev_id)
312 {
313 struct bfin_serial_port *uart = dev_id;
314
315 spin_lock(&uart->port.lock);
316 if (UART_GET_LSR(uart) & THRE)
317 bfin_serial_tx_chars(uart);
318 spin_unlock(&uart->port.lock);
319
320 return IRQ_HANDLED;
321 }
322 #endif
323
324 #ifdef CONFIG_SERIAL_BFIN_DMA
325 static void bfin_serial_dma_tx_chars(struct bfin_serial_port *uart)
326 {
327 struct circ_buf *xmit = &uart->port.info->xmit;
328
329 uart->tx_done = 0;
330
331 /*
332 * Check the modem control lines before
333 * transmitting anything.
334 */
335 bfin_serial_mctrl_check(uart);
336
337 if (uart_circ_empty(xmit) || uart_tx_stopped(&uart->port)) {
338 uart->tx_count = 0;
339 uart->tx_done = 1;
340 return;
341 }
342
343 if (uart->port.x_char) {
344 UART_PUT_CHAR(uart, uart->port.x_char);
345 uart->port.icount.tx++;
346 uart->port.x_char = 0;
347 }
348
349 uart->tx_count = CIRC_CNT(xmit->head, xmit->tail, UART_XMIT_SIZE);
350 if (uart->tx_count > (UART_XMIT_SIZE - xmit->tail))
351 uart->tx_count = UART_XMIT_SIZE - xmit->tail;
352 blackfin_dcache_flush_range((unsigned long)(xmit->buf+xmit->tail),
353 (unsigned long)(xmit->buf+xmit->tail+uart->tx_count));
354 set_dma_config(uart->tx_dma_channel,
355 set_bfin_dma_config(DIR_READ, DMA_FLOW_STOP,
356 INTR_ON_BUF,
357 DIMENSION_LINEAR,
358 DATA_SIZE_8,
359 DMA_SYNC_RESTART));
360 set_dma_start_addr(uart->tx_dma_channel, (unsigned long)(xmit->buf+xmit->tail));
361 set_dma_x_count(uart->tx_dma_channel, uart->tx_count);
362 set_dma_x_modify(uart->tx_dma_channel, 1);
363 enable_dma(uart->tx_dma_channel);
364
365 UART_SET_IER(uart, ETBEI);
366 }
367
368 static void bfin_serial_dma_rx_chars(struct bfin_serial_port *uart)
369 {
370 struct tty_struct *tty = uart->port.info->port.tty;
371 int i, flg, status;
372
373 status = UART_GET_LSR(uart);
374 UART_CLEAR_LSR(uart);
375
376 uart->port.icount.rx +=
377 CIRC_CNT(uart->rx_dma_buf.head, uart->rx_dma_buf.tail,
378 UART_XMIT_SIZE);
379
380 if (status & BI) {
381 uart->port.icount.brk++;
382 if (uart_handle_break(&uart->port))
383 goto dma_ignore_char;
384 status &= ~(PE | FE);
385 }
386 if (status & PE)
387 uart->port.icount.parity++;
388 if (status & OE)
389 uart->port.icount.overrun++;
390 if (status & FE)
391 uart->port.icount.frame++;
392
393 status &= uart->port.read_status_mask;
394
395 if (status & BI)
396 flg = TTY_BREAK;
397 else if (status & PE)
398 flg = TTY_PARITY;
399 else if (status & FE)
400 flg = TTY_FRAME;
401 else
402 flg = TTY_NORMAL;
403
404 for (i = uart->rx_dma_buf.tail; i != uart->rx_dma_buf.head; i++) {
405 if (i >= UART_XMIT_SIZE)
406 i = 0;
407 if (!uart_handle_sysrq_char(&uart->port, uart->rx_dma_buf.buf[i]))
408 uart_insert_char(&uart->port, status, OE,
409 uart->rx_dma_buf.buf[i], flg);
410 }
411
412 dma_ignore_char:
413 tty_flip_buffer_push(tty);
414 }
415
416 void bfin_serial_rx_dma_timeout(struct bfin_serial_port *uart)
417 {
418 int x_pos, pos, flags;
419
420 spin_lock_irqsave(&uart->port.lock, flags);
421
422 uart->rx_dma_nrows = get_dma_curr_ycount(uart->rx_dma_channel);
423 x_pos = get_dma_curr_xcount(uart->rx_dma_channel);
424 uart->rx_dma_nrows = DMA_RX_YCOUNT - uart->rx_dma_nrows;
425 if (uart->rx_dma_nrows == DMA_RX_YCOUNT)
426 uart->rx_dma_nrows = 0;
427 x_pos = DMA_RX_XCOUNT - x_pos;
428 if (x_pos == DMA_RX_XCOUNT)
429 x_pos = 0;
430
431 pos = uart->rx_dma_nrows * DMA_RX_XCOUNT + x_pos;
432 if (pos != uart->rx_dma_buf.tail) {
433 uart->rx_dma_buf.head = pos;
434 bfin_serial_dma_rx_chars(uart);
435 uart->rx_dma_buf.tail = uart->rx_dma_buf.head;
436 }
437
438 spin_unlock_irqrestore(&uart->port.lock, flags);
439
440 mod_timer(&(uart->rx_dma_timer), jiffies + DMA_RX_FLUSH_JIFFIES);
441 }
442
443 static irqreturn_t bfin_serial_dma_tx_int(int irq, void *dev_id)
444 {
445 struct bfin_serial_port *uart = dev_id;
446 struct circ_buf *xmit = &uart->port.info->xmit;
447
448 spin_lock(&uart->port.lock);
449 if (!(get_dma_curr_irqstat(uart->tx_dma_channel)&DMA_RUN)) {
450 disable_dma(uart->tx_dma_channel);
451 clear_dma_irqstat(uart->tx_dma_channel);
452 UART_CLEAR_IER(uart, ETBEI);
453 xmit->tail = (xmit->tail + uart->tx_count) & (UART_XMIT_SIZE - 1);
454 uart->port.icount.tx += uart->tx_count;
455
456 if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
457 uart_write_wakeup(&uart->port);
458
459 bfin_serial_dma_tx_chars(uart);
460 }
461
462 spin_unlock(&uart->port.lock);
463 return IRQ_HANDLED;
464 }
465
466 static irqreturn_t bfin_serial_dma_rx_int(int irq, void *dev_id)
467 {
468 struct bfin_serial_port *uart = dev_id;
469 unsigned short irqstat;
470
471 spin_lock(&uart->port.lock);
472 irqstat = get_dma_curr_irqstat(uart->rx_dma_channel);
473 clear_dma_irqstat(uart->rx_dma_channel);
474 bfin_serial_dma_rx_chars(uart);
475 spin_unlock(&uart->port.lock);
476
477 return IRQ_HANDLED;
478 }
479 #endif
480
481 /*
482 * Return TIOCSER_TEMT when transmitter is not busy.
483 */
484 static unsigned int bfin_serial_tx_empty(struct uart_port *port)
485 {
486 struct bfin_serial_port *uart = (struct bfin_serial_port *)port;
487 unsigned short lsr;
488
489 lsr = UART_GET_LSR(uart);
490 if (lsr & TEMT)
491 return TIOCSER_TEMT;
492 else
493 return 0;
494 }
495
496 static unsigned int bfin_serial_get_mctrl(struct uart_port *port)
497 {
498 #ifdef CONFIG_SERIAL_BFIN_CTSRTS
499 struct bfin_serial_port *uart = (struct bfin_serial_port *)port;
500 if (uart->cts_pin < 0)
501 return TIOCM_CTS | TIOCM_DSR | TIOCM_CAR;
502
503 if (UART_GET_CTS(uart))
504 return TIOCM_DSR | TIOCM_CAR;
505 else
506 #endif
507 return TIOCM_CTS | TIOCM_DSR | TIOCM_CAR;
508 }
509
510 static void bfin_serial_set_mctrl(struct uart_port *port, unsigned int mctrl)
511 {
512 #ifdef CONFIG_SERIAL_BFIN_CTSRTS
513 struct bfin_serial_port *uart = (struct bfin_serial_port *)port;
514 if (uart->rts_pin < 0)
515 return;
516
517 if (mctrl & TIOCM_RTS)
518 UART_CLEAR_RTS(uart);
519 else
520 UART_SET_RTS(uart);
521 #endif
522 }
523
524 /*
525 * Handle any change of modem status signal since we were last called.
526 */
527 static void bfin_serial_mctrl_check(struct bfin_serial_port *uart)
528 {
529 #ifdef CONFIG_SERIAL_BFIN_CTSRTS
530 unsigned int status;
531 struct uart_info *info = uart->port.info;
532 struct tty_struct *tty = info->port.tty;
533
534 status = bfin_serial_get_mctrl(&uart->port);
535 uart_handle_cts_change(&uart->port, status & TIOCM_CTS);
536 if (!(status & TIOCM_CTS)) {
537 tty->hw_stopped = 1;
538 uart->cts_timer.data = (unsigned long)(uart);
539 uart->cts_timer.function = (void *)bfin_serial_mctrl_check;
540 uart->cts_timer.expires = jiffies + CTS_CHECK_JIFFIES;
541 add_timer(&(uart->cts_timer));
542 } else {
543 tty->hw_stopped = 0;
544 }
545 #endif
546 }
547
548 /*
549 * Interrupts are always disabled.
550 */
551 static void bfin_serial_break_ctl(struct uart_port *port, int break_state)
552 {
553 struct bfin_serial_port *uart = (struct bfin_serial_port *)port;
554 u16 lcr = UART_GET_LCR(uart);
555 if (break_state)
556 lcr |= SB;
557 else
558 lcr &= ~SB;
559 UART_PUT_LCR(uart, lcr);
560 SSYNC();
561 }
562
563 static int bfin_serial_startup(struct uart_port *port)
564 {
565 struct bfin_serial_port *uart = (struct bfin_serial_port *)port;
566
567 #ifdef CONFIG_SERIAL_BFIN_DMA
568 dma_addr_t dma_handle;
569
570 if (request_dma(uart->rx_dma_channel, "BFIN_UART_RX") < 0) {
571 printk(KERN_NOTICE "Unable to attach Blackfin UART RX DMA channel\n");
572 return -EBUSY;
573 }
574
575 if (request_dma(uart->tx_dma_channel, "BFIN_UART_TX") < 0) {
576 printk(KERN_NOTICE "Unable to attach Blackfin UART TX DMA channel\n");
577 free_dma(uart->rx_dma_channel);
578 return -EBUSY;
579 }
580
581 set_dma_callback(uart->rx_dma_channel, bfin_serial_dma_rx_int, uart);
582 set_dma_callback(uart->tx_dma_channel, bfin_serial_dma_tx_int, uart);
583
584 uart->rx_dma_buf.buf = (unsigned char *)dma_alloc_coherent(NULL, PAGE_SIZE, &dma_handle, GFP_DMA);
585 uart->rx_dma_buf.head = 0;
586 uart->rx_dma_buf.tail = 0;
587 uart->rx_dma_nrows = 0;
588
589 set_dma_config(uart->rx_dma_channel,
590 set_bfin_dma_config(DIR_WRITE, DMA_FLOW_AUTO,
591 INTR_ON_ROW, DIMENSION_2D,
592 DATA_SIZE_8,
593 DMA_SYNC_RESTART));
594 set_dma_x_count(uart->rx_dma_channel, DMA_RX_XCOUNT);
595 set_dma_x_modify(uart->rx_dma_channel, 1);
596 set_dma_y_count(uart->rx_dma_channel, DMA_RX_YCOUNT);
597 set_dma_y_modify(uart->rx_dma_channel, 1);
598 set_dma_start_addr(uart->rx_dma_channel, (unsigned long)uart->rx_dma_buf.buf);
599 enable_dma(uart->rx_dma_channel);
600
601 uart->rx_dma_timer.data = (unsigned long)(uart);
602 uart->rx_dma_timer.function = (void *)bfin_serial_rx_dma_timeout;
603 uart->rx_dma_timer.expires = jiffies + DMA_RX_FLUSH_JIFFIES;
604 add_timer(&(uart->rx_dma_timer));
605 #else
606 #if defined(CONFIG_KGDB_SERIAL_CONSOLE) || \
607 defined(CONFIG_KGDB_SERIAL_CONSOLE_MODULE)
608 if (kgdboc_port_line == uart->port.line && kgdboc_break_enabled)
609 kgdboc_break_enabled = 0;
610 else {
611 # endif
612 if (request_irq(uart->port.irq, bfin_serial_rx_int, IRQF_DISABLED,
613 "BFIN_UART_RX", uart)) {
614 printk(KERN_NOTICE "Unable to attach BlackFin UART RX interrupt\n");
615 return -EBUSY;
616 }
617
618 if (request_irq
619 (uart->port.irq+1, bfin_serial_tx_int, IRQF_DISABLED,
620 "BFIN_UART_TX", uart)) {
621 printk(KERN_NOTICE "Unable to attach BlackFin UART TX interrupt\n");
622 free_irq(uart->port.irq, uart);
623 return -EBUSY;
624 }
625
626 # ifdef CONFIG_BF54x
627 {
628 unsigned uart_dma_ch_rx, uart_dma_ch_tx;
629
630 switch (uart->port.irq) {
631 case IRQ_UART3_RX:
632 uart_dma_ch_rx = CH_UART3_RX;
633 uart_dma_ch_tx = CH_UART3_TX;
634 break;
635 case IRQ_UART2_RX:
636 uart_dma_ch_rx = CH_UART2_RX;
637 uart_dma_ch_tx = CH_UART2_TX;
638 break;
639 default:
640 uart_dma_ch_rx = uart_dma_ch_tx = 0;
641 break;
642 };
643
644 if (uart_dma_ch_rx &&
645 request_dma(uart_dma_ch_rx, "BFIN_UART_RX") < 0) {
646 printk(KERN_NOTICE"Fail to attach UART interrupt\n");
647 free_irq(uart->port.irq, uart);
648 free_irq(uart->port.irq + 1, uart);
649 return -EBUSY;
650 }
651 if (uart_dma_ch_tx &&
652 request_dma(uart_dma_ch_tx, "BFIN_UART_TX") < 0) {
653 printk(KERN_NOTICE "Fail to attach UART interrupt\n");
654 free_dma(uart_dma_ch_rx);
655 free_irq(uart->port.irq, uart);
656 free_irq(uart->port.irq + 1, uart);
657 return -EBUSY;
658 }
659 }
660 # endif
661 #if defined(CONFIG_KGDB_SERIAL_CONSOLE) || \
662 defined(CONFIG_KGDB_SERIAL_CONSOLE_MODULE)
663 }
664 # endif
665 #endif
666 UART_SET_IER(uart, ERBFI);
667 return 0;
668 }
669
670 static void bfin_serial_shutdown(struct uart_port *port)
671 {
672 struct bfin_serial_port *uart = (struct bfin_serial_port *)port;
673
674 #ifdef CONFIG_SERIAL_BFIN_DMA
675 disable_dma(uart->tx_dma_channel);
676 free_dma(uart->tx_dma_channel);
677 disable_dma(uart->rx_dma_channel);
678 free_dma(uart->rx_dma_channel);
679 del_timer(&(uart->rx_dma_timer));
680 dma_free_coherent(NULL, PAGE_SIZE, uart->rx_dma_buf.buf, 0);
681 #else
682 #ifdef CONFIG_BF54x
683 switch (uart->port.irq) {
684 case IRQ_UART3_RX:
685 free_dma(CH_UART3_RX);
686 free_dma(CH_UART3_TX);
687 break;
688 case IRQ_UART2_RX:
689 free_dma(CH_UART2_RX);
690 free_dma(CH_UART2_TX);
691 break;
692 default:
693 break;
694 };
695 #endif
696 free_irq(uart->port.irq, uart);
697 free_irq(uart->port.irq+1, uart);
698 #endif
699 }
700
701 static void
702 bfin_serial_set_termios(struct uart_port *port, struct ktermios *termios,
703 struct ktermios *old)
704 {
705 struct bfin_serial_port *uart = (struct bfin_serial_port *)port;
706 unsigned long flags;
707 unsigned int baud, quot;
708 unsigned short val, ier, lcr = 0;
709
710 switch (termios->c_cflag & CSIZE) {
711 case CS8:
712 lcr = WLS(8);
713 break;
714 case CS7:
715 lcr = WLS(7);
716 break;
717 case CS6:
718 lcr = WLS(6);
719 break;
720 case CS5:
721 lcr = WLS(5);
722 break;
723 default:
724 printk(KERN_ERR "%s: word lengh not supported\n",
725 __func__);
726 }
727
728 if (termios->c_cflag & CSTOPB)
729 lcr |= STB;
730 if (termios->c_cflag & PARENB)
731 lcr |= PEN;
732 if (!(termios->c_cflag & PARODD))
733 lcr |= EPS;
734 if (termios->c_cflag & CMSPAR)
735 lcr |= STP;
736
737 port->read_status_mask = OE;
738 if (termios->c_iflag & INPCK)
739 port->read_status_mask |= (FE | PE);
740 if (termios->c_iflag & (BRKINT | PARMRK))
741 port->read_status_mask |= BI;
742
743 /*
744 * Characters to ignore
745 */
746 port->ignore_status_mask = 0;
747 if (termios->c_iflag & IGNPAR)
748 port->ignore_status_mask |= FE | PE;
749 if (termios->c_iflag & IGNBRK) {
750 port->ignore_status_mask |= BI;
751 /*
752 * If we're ignoring parity and break indicators,
753 * ignore overruns too (for real raw support).
754 */
755 if (termios->c_iflag & IGNPAR)
756 port->ignore_status_mask |= OE;
757 }
758
759 baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16);
760 quot = uart_get_divisor(port, baud);
761 spin_lock_irqsave(&uart->port.lock, flags);
762
763 UART_SET_ANOMALY_THRESHOLD(uart, USEC_PER_SEC / baud * 15);
764
765 /* Disable UART */
766 ier = UART_GET_IER(uart);
767 UART_DISABLE_INTS(uart);
768
769 /* Set DLAB in LCR to Access DLL and DLH */
770 UART_SET_DLAB(uart);
771
772 UART_PUT_DLL(uart, quot & 0xFF);
773 UART_PUT_DLH(uart, (quot >> 8) & 0xFF);
774 SSYNC();
775
776 /* Clear DLAB in LCR to Access THR RBR IER */
777 UART_CLEAR_DLAB(uart);
778
779 UART_PUT_LCR(uart, lcr);
780
781 /* Enable UART */
782 UART_ENABLE_INTS(uart, ier);
783
784 val = UART_GET_GCTL(uart);
785 val |= UCEN;
786 UART_PUT_GCTL(uart, val);
787
788 /* Port speed changed, update the per-port timeout. */
789 uart_update_timeout(port, termios->c_cflag, baud);
790
791 spin_unlock_irqrestore(&uart->port.lock, flags);
792 }
793
794 static const char *bfin_serial_type(struct uart_port *port)
795 {
796 struct bfin_serial_port *uart = (struct bfin_serial_port *)port;
797
798 return uart->port.type == PORT_BFIN ? "BFIN-UART" : NULL;
799 }
800
801 /*
802 * Release the memory region(s) being used by 'port'.
803 */
804 static void bfin_serial_release_port(struct uart_port *port)
805 {
806 }
807
808 /*
809 * Request the memory region(s) being used by 'port'.
810 */
811 static int bfin_serial_request_port(struct uart_port *port)
812 {
813 return 0;
814 }
815
816 /*
817 * Configure/autoconfigure the port.
818 */
819 static void bfin_serial_config_port(struct uart_port *port, int flags)
820 {
821 struct bfin_serial_port *uart = (struct bfin_serial_port *)port;
822
823 if (flags & UART_CONFIG_TYPE &&
824 bfin_serial_request_port(&uart->port) == 0)
825 uart->port.type = PORT_BFIN;
826 }
827
828 /*
829 * Verify the new serial_struct (for TIOCSSERIAL).
830 * The only change we allow are to the flags and type, and
831 * even then only between PORT_BFIN and PORT_UNKNOWN
832 */
833 static int
834 bfin_serial_verify_port(struct uart_port *port, struct serial_struct *ser)
835 {
836 return 0;
837 }
838
839 /*
840 * Enable the IrDA function if tty->ldisc.num is N_IRDA.
841 * In other cases, disable IrDA function.
842 */
843 static void bfin_serial_set_ldisc(struct uart_port *port)
844 {
845 int line = port->line;
846 unsigned short val;
847
848 if (line >= port->info->port.tty->driver->num)
849 return;
850
851 switch (port->info->port.tty->termios->c_line) {
852 case N_IRDA:
853 val = UART_GET_GCTL(&bfin_serial_ports[line]);
854 val |= (IREN | RPOLC);
855 UART_PUT_GCTL(&bfin_serial_ports[line], val);
856 break;
857 default:
858 val = UART_GET_GCTL(&bfin_serial_ports[line]);
859 val &= ~(IREN | RPOLC);
860 UART_PUT_GCTL(&bfin_serial_ports[line], val);
861 }
862 }
863
864 #ifdef CONFIG_CONSOLE_POLL
865 static void bfin_serial_poll_put_char(struct uart_port *port, unsigned char chr)
866 {
867 struct bfin_serial_port *uart = (struct bfin_serial_port *)port;
868
869 while (!(UART_GET_LSR(uart) & THRE))
870 cpu_relax();
871
872 UART_CLEAR_DLAB(uart);
873 UART_PUT_CHAR(uart, (unsigned char)chr);
874 }
875
876 static int bfin_serial_poll_get_char(struct uart_port *port)
877 {
878 struct bfin_serial_port *uart = (struct bfin_serial_port *)port;
879 unsigned char chr;
880
881 while (!(UART_GET_LSR(uart) & DR))
882 cpu_relax();
883
884 UART_CLEAR_DLAB(uart);
885 chr = UART_GET_CHAR(uart);
886
887 return chr;
888 }
889 #endif
890
891 #if defined(CONFIG_KGDB_SERIAL_CONSOLE) || \
892 defined(CONFIG_KGDB_SERIAL_CONSOLE_MODULE)
893 static void bfin_kgdboc_port_shutdown(struct uart_port *port)
894 {
895 if (kgdboc_break_enabled) {
896 kgdboc_break_enabled = 0;
897 bfin_serial_shutdown(port);
898 }
899 }
900
901 static int bfin_kgdboc_port_startup(struct uart_port *port)
902 {
903 kgdboc_port_line = port->line;
904 kgdboc_break_enabled = !bfin_serial_startup(port);
905 return 0;
906 }
907 #endif
908
909 static void bfin_serial_reset_irda(struct uart_port *port)
910 {
911 int line = port->line;
912 unsigned short val;
913
914 val = UART_GET_GCTL(&bfin_serial_ports[line]);
915 val &= ~(IREN | RPOLC);
916 UART_PUT_GCTL(&bfin_serial_ports[line], val);
917 SSYNC();
918 val |= (IREN | RPOLC);
919 UART_PUT_GCTL(&bfin_serial_ports[line], val);
920 SSYNC();
921 }
922
923 static struct uart_ops bfin_serial_pops = {
924 .tx_empty = bfin_serial_tx_empty,
925 .set_mctrl = bfin_serial_set_mctrl,
926 .get_mctrl = bfin_serial_get_mctrl,
927 .stop_tx = bfin_serial_stop_tx,
928 .start_tx = bfin_serial_start_tx,
929 .stop_rx = bfin_serial_stop_rx,
930 .enable_ms = bfin_serial_enable_ms,
931 .break_ctl = bfin_serial_break_ctl,
932 .startup = bfin_serial_startup,
933 .shutdown = bfin_serial_shutdown,
934 .set_termios = bfin_serial_set_termios,
935 .set_ldisc = bfin_serial_set_ldisc,
936 .type = bfin_serial_type,
937 .release_port = bfin_serial_release_port,
938 .request_port = bfin_serial_request_port,
939 .config_port = bfin_serial_config_port,
940 .verify_port = bfin_serial_verify_port,
941 #if defined(CONFIG_KGDB_SERIAL_CONSOLE) || \
942 defined(CONFIG_KGDB_SERIAL_CONSOLE_MODULE)
943 .kgdboc_port_startup = bfin_kgdboc_port_startup,
944 .kgdboc_port_shutdown = bfin_kgdboc_port_shutdown,
945 #endif
946 #ifdef CONFIG_CONSOLE_POLL
947 .poll_put_char = bfin_serial_poll_put_char,
948 .poll_get_char = bfin_serial_poll_get_char,
949 #endif
950 };
951
952 static void __init bfin_serial_init_ports(void)
953 {
954 static int first = 1;
955 int i;
956
957 if (!first)
958 return;
959 first = 0;
960
961 for (i = 0; i < nr_active_ports; i++) {
962 bfin_serial_ports[i].port.uartclk = get_sclk();
963 bfin_serial_ports[i].port.fifosize = BFIN_UART_TX_FIFO_SIZE;
964 bfin_serial_ports[i].port.ops = &bfin_serial_pops;
965 bfin_serial_ports[i].port.line = i;
966 bfin_serial_ports[i].port.iotype = UPIO_MEM;
967 bfin_serial_ports[i].port.membase =
968 (void __iomem *)bfin_serial_resource[i].uart_base_addr;
969 bfin_serial_ports[i].port.mapbase =
970 bfin_serial_resource[i].uart_base_addr;
971 bfin_serial_ports[i].port.irq =
972 bfin_serial_resource[i].uart_irq;
973 bfin_serial_ports[i].port.flags = UPF_BOOT_AUTOCONF;
974 #ifdef CONFIG_SERIAL_BFIN_DMA
975 bfin_serial_ports[i].tx_done = 1;
976 bfin_serial_ports[i].tx_count = 0;
977 bfin_serial_ports[i].tx_dma_channel =
978 bfin_serial_resource[i].uart_tx_dma_channel;
979 bfin_serial_ports[i].rx_dma_channel =
980 bfin_serial_resource[i].uart_rx_dma_channel;
981 init_timer(&(bfin_serial_ports[i].rx_dma_timer));
982 #endif
983 #ifdef CONFIG_SERIAL_BFIN_CTSRTS
984 init_timer(&(bfin_serial_ports[i].cts_timer));
985 bfin_serial_ports[i].cts_pin =
986 bfin_serial_resource[i].uart_cts_pin;
987 bfin_serial_ports[i].rts_pin =
988 bfin_serial_resource[i].uart_rts_pin;
989 #endif
990 bfin_serial_hw_init(&bfin_serial_ports[i]);
991 }
992
993 }
994
995 #if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK)
996 /*
997 * If the port was already initialised (eg, by a boot loader),
998 * try to determine the current setup.
999 */
1000 static void __init
1001 bfin_serial_console_get_options(struct bfin_serial_port *uart, int *baud,
1002 int *parity, int *bits)
1003 {
1004 unsigned short status;
1005
1006 status = UART_GET_IER(uart) & (ERBFI | ETBEI);
1007 if (status == (ERBFI | ETBEI)) {
1008 /* ok, the port was enabled */
1009 u16 lcr, dlh, dll;
1010
1011 lcr = UART_GET_LCR(uart);
1012
1013 *parity = 'n';
1014 if (lcr & PEN) {
1015 if (lcr & EPS)
1016 *parity = 'e';
1017 else
1018 *parity = 'o';
1019 }
1020 switch (lcr & 0x03) {
1021 case 0: *bits = 5; break;
1022 case 1: *bits = 6; break;
1023 case 2: *bits = 7; break;
1024 case 3: *bits = 8; break;
1025 }
1026 /* Set DLAB in LCR to Access DLL and DLH */
1027 UART_SET_DLAB(uart);
1028
1029 dll = UART_GET_DLL(uart);
1030 dlh = UART_GET_DLH(uart);
1031
1032 /* Clear DLAB in LCR to Access THR RBR IER */
1033 UART_CLEAR_DLAB(uart);
1034
1035 *baud = get_sclk() / (16*(dll | dlh << 8));
1036 }
1037 pr_debug("%s:baud = %d, parity = %c, bits= %d\n", __func__, *baud, *parity, *bits);
1038 }
1039
1040 static struct uart_driver bfin_serial_reg;
1041
1042 static int __init
1043 bfin_serial_console_setup(struct console *co, char *options)
1044 {
1045 struct bfin_serial_port *uart;
1046 int baud = 57600;
1047 int bits = 8;
1048 int parity = 'n';
1049 # ifdef CONFIG_SERIAL_BFIN_CTSRTS
1050 int flow = 'r';
1051 # else
1052 int flow = 'n';
1053 # endif
1054
1055 /*
1056 * Check whether an invalid uart number has been specified, and
1057 * if so, search for the first available port that does have
1058 * console support.
1059 */
1060 if (co->index == -1 || co->index >= nr_active_ports)
1061 co->index = 0;
1062 uart = &bfin_serial_ports[co->index];
1063
1064 if (options)
1065 uart_parse_options(options, &baud, &parity, &bits, &flow);
1066 else
1067 bfin_serial_console_get_options(uart, &baud, &parity, &bits);
1068
1069 return uart_set_options(&uart->port, co, baud, parity, bits, flow);
1070 }
1071 #endif /* defined (CONFIG_SERIAL_BFIN_CONSOLE) ||
1072 defined (CONFIG_EARLY_PRINTK) */
1073
1074 #ifdef CONFIG_SERIAL_BFIN_CONSOLE
1075 static void bfin_serial_console_putchar(struct uart_port *port, int ch)
1076 {
1077 struct bfin_serial_port *uart = (struct bfin_serial_port *)port;
1078 while (!(UART_GET_LSR(uart) & THRE))
1079 barrier();
1080 UART_PUT_CHAR(uart, ch);
1081 SSYNC();
1082 }
1083
1084 /*
1085 * Interrupts are disabled on entering
1086 */
1087 static void
1088 bfin_serial_console_write(struct console *co, const char *s, unsigned int count)
1089 {
1090 struct bfin_serial_port *uart = &bfin_serial_ports[co->index];
1091 int flags = 0;
1092
1093 spin_lock_irqsave(&uart->port.lock, flags);
1094 uart_console_write(&uart->port, s, count, bfin_serial_console_putchar);
1095 spin_unlock_irqrestore(&uart->port.lock, flags);
1096
1097 }
1098
1099 static struct console bfin_serial_console = {
1100 .name = BFIN_SERIAL_NAME,
1101 .write = bfin_serial_console_write,
1102 .device = uart_console_device,
1103 .setup = bfin_serial_console_setup,
1104 .flags = CON_PRINTBUFFER,
1105 .index = -1,
1106 .data = &bfin_serial_reg,
1107 };
1108
1109 static int __init bfin_serial_rs_console_init(void)
1110 {
1111 bfin_serial_init_ports();
1112 register_console(&bfin_serial_console);
1113
1114 return 0;
1115 }
1116 console_initcall(bfin_serial_rs_console_init);
1117
1118 #define BFIN_SERIAL_CONSOLE &bfin_serial_console
1119 #else
1120 #define BFIN_SERIAL_CONSOLE NULL
1121 #endif /* CONFIG_SERIAL_BFIN_CONSOLE */
1122
1123
1124 #ifdef CONFIG_EARLY_PRINTK
1125 static __init void early_serial_putc(struct uart_port *port, int ch)
1126 {
1127 unsigned timeout = 0xffff;
1128 struct bfin_serial_port *uart = (struct bfin_serial_port *)port;
1129
1130 while ((!(UART_GET_LSR(uart) & THRE)) && --timeout)
1131 cpu_relax();
1132 UART_PUT_CHAR(uart, ch);
1133 }
1134
1135 static __init void early_serial_write(struct console *con, const char *s,
1136 unsigned int n)
1137 {
1138 struct bfin_serial_port *uart = &bfin_serial_ports[con->index];
1139 unsigned int i;
1140
1141 for (i = 0; i < n; i++, s++) {
1142 if (*s == '\n')
1143 early_serial_putc(&uart->port, '\r');
1144 early_serial_putc(&uart->port, *s);
1145 }
1146 }
1147
1148 static struct __initdata console bfin_early_serial_console = {
1149 .name = "early_BFuart",
1150 .write = early_serial_write,
1151 .device = uart_console_device,
1152 .flags = CON_PRINTBUFFER,
1153 .setup = bfin_serial_console_setup,
1154 .index = -1,
1155 .data = &bfin_serial_reg,
1156 };
1157
1158 struct console __init *bfin_earlyserial_init(unsigned int port,
1159 unsigned int cflag)
1160 {
1161 struct bfin_serial_port *uart;
1162 struct ktermios t;
1163
1164 if (port == -1 || port >= nr_active_ports)
1165 port = 0;
1166 bfin_serial_init_ports();
1167 bfin_early_serial_console.index = port;
1168 uart = &bfin_serial_ports[port];
1169 t.c_cflag = cflag;
1170 t.c_iflag = 0;
1171 t.c_oflag = 0;
1172 t.c_lflag = ICANON;
1173 t.c_line = port;
1174 bfin_serial_set_termios(&uart->port, &t, &t);
1175 return &bfin_early_serial_console;
1176 }
1177
1178 #endif /* CONFIG_EARLY_PRINTK */
1179
1180 static struct uart_driver bfin_serial_reg = {
1181 .owner = THIS_MODULE,
1182 .driver_name = "bfin-uart",
1183 .dev_name = BFIN_SERIAL_NAME,
1184 .major = BFIN_SERIAL_MAJOR,
1185 .minor = BFIN_SERIAL_MINOR,
1186 .nr = BFIN_UART_NR_PORTS,
1187 .cons = BFIN_SERIAL_CONSOLE,
1188 };
1189
1190 static int bfin_serial_suspend(struct platform_device *dev, pm_message_t state)
1191 {
1192 int i;
1193
1194 for (i = 0; i < nr_active_ports; i++) {
1195 if (bfin_serial_ports[i].port.dev != &dev->dev)
1196 continue;
1197 uart_suspend_port(&bfin_serial_reg, &bfin_serial_ports[i].port);
1198 }
1199
1200 return 0;
1201 }
1202
1203 static int bfin_serial_resume(struct platform_device *dev)
1204 {
1205 int i;
1206
1207 for (i = 0; i < nr_active_ports; i++) {
1208 if (bfin_serial_ports[i].port.dev != &dev->dev)
1209 continue;
1210 uart_resume_port(&bfin_serial_reg, &bfin_serial_ports[i].port);
1211 }
1212
1213 return 0;
1214 }
1215
1216 static int bfin_serial_probe(struct platform_device *dev)
1217 {
1218 struct resource *res = dev->resource;
1219 int i;
1220
1221 for (i = 0; i < dev->num_resources; i++, res++)
1222 if (res->flags & IORESOURCE_MEM)
1223 break;
1224
1225 if (i < dev->num_resources) {
1226 for (i = 0; i < nr_active_ports; i++, res++) {
1227 if (bfin_serial_ports[i].port.mapbase != res->start)
1228 continue;
1229 bfin_serial_ports[i].port.dev = &dev->dev;
1230 uart_add_one_port(&bfin_serial_reg, &bfin_serial_ports[i].port);
1231 }
1232 }
1233
1234 return 0;
1235 }
1236
1237 static int bfin_serial_remove(struct platform_device *dev)
1238 {
1239 int i;
1240
1241 for (i = 0; i < nr_active_ports; i++) {
1242 if (bfin_serial_ports[i].port.dev != &dev->dev)
1243 continue;
1244 uart_remove_one_port(&bfin_serial_reg, &bfin_serial_ports[i].port);
1245 bfin_serial_ports[i].port.dev = NULL;
1246 #ifdef CONFIG_SERIAL_BFIN_CTSRTS
1247 gpio_free(bfin_serial_ports[i].cts_pin);
1248 gpio_free(bfin_serial_ports[i].rts_pin);
1249 #endif
1250 }
1251
1252 return 0;
1253 }
1254
1255 static struct platform_driver bfin_serial_driver = {
1256 .probe = bfin_serial_probe,
1257 .remove = bfin_serial_remove,
1258 .suspend = bfin_serial_suspend,
1259 .resume = bfin_serial_resume,
1260 .driver = {
1261 .name = "bfin-uart",
1262 .owner = THIS_MODULE,
1263 },
1264 };
1265
1266 static int __init bfin_serial_init(void)
1267 {
1268 int ret;
1269
1270 pr_info("Serial: Blackfin serial driver\n");
1271
1272 bfin_serial_init_ports();
1273
1274 ret = uart_register_driver(&bfin_serial_reg);
1275 if (ret == 0) {
1276 ret = platform_driver_register(&bfin_serial_driver);
1277 if (ret) {
1278 pr_debug("uart register failed\n");
1279 uart_unregister_driver(&bfin_serial_reg);
1280 }
1281 }
1282 return ret;
1283 }
1284
1285 static void __exit bfin_serial_exit(void)
1286 {
1287 platform_driver_unregister(&bfin_serial_driver);
1288 uart_unregister_driver(&bfin_serial_reg);
1289 }
1290
1291
1292 module_init(bfin_serial_init);
1293 module_exit(bfin_serial_exit);
1294
1295 MODULE_AUTHOR("Aubrey.Li <aubrey.li@analog.com>");
1296 MODULE_DESCRIPTION("Blackfin generic serial port driver");
1297 MODULE_LICENSE("GPL");
1298 MODULE_ALIAS_CHARDEV_MAJOR(BFIN_SERIAL_MAJOR);
1299 MODULE_ALIAS("platform:bfin-uart");
Linux kernel - Deliverables
This page took 0.061168 seconds and 5 git commands to generate.