Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux...
[deliverable/linux.git] / drivers / serial / mpc52xx_uart.c
1 /*
2 * Driver for the PSC of the Freescale MPC52xx PSCs configured as UARTs.
3 *
4 * FIXME According to the usermanual the status bits in the status register
5 * are only updated when the peripherals access the FIFO and not when the
6 * CPU access them. So since we use this bits to know when we stop writing
7 * and reading, they may not be updated in-time and a race condition may
8 * exists. But I haven't be able to prove this and I don't care. But if
9 * any problem arises, it might worth checking. The TX/RX FIFO Stats
10 * registers should be used in addition.
11 * Update: Actually, they seem updated ... At least the bits we use.
12 *
13 *
14 * Maintainer : Sylvain Munaut <tnt@246tNt.com>
15 *
16 * Some of the code has been inspired/copied from the 2.4 code written
17 * by Dale Farnsworth <dfarnsworth@mvista.com>.
18 *
19 * Copyright (C) 2008 Freescale Semiconductor Inc.
20 * John Rigby <jrigby@gmail.com>
21 * Added support for MPC5121
22 * Copyright (C) 2006 Secret Lab Technologies Ltd.
23 * Grant Likely <grant.likely@secretlab.ca>
24 * Copyright (C) 2004-2006 Sylvain Munaut <tnt@246tNt.com>
25 * Copyright (C) 2003 MontaVista, Software, Inc.
26 *
27 * This file is licensed under the terms of the GNU General Public License
28 * version 2. This program is licensed "as is" without any warranty of any
29 * kind, whether express or implied.
30 */
31
32 /* Platform device Usage :
33 *
34 * Since PSCs can have multiple function, the correct driver for each one
35 * is selected by calling mpc52xx_match_psc_function(...). The function
36 * handled by this driver is "uart".
37 *
38 * The driver init all necessary registers to place the PSC in uart mode without
39 * DCD. However, the pin multiplexing aren't changed and should be set either
40 * by the bootloader or in the platform init code.
41 *
42 * The idx field must be equal to the PSC index (e.g. 0 for PSC1, 1 for PSC2,
43 * and so on). So the PSC1 is mapped to /dev/ttyPSC0, PSC2 to /dev/ttyPSC1 and
44 * so on. But be warned, it's an ABSOLUTE REQUIREMENT ! This is needed mainly
45 * fpr the console code : without this 1:1 mapping, at early boot time, when we
46 * are parsing the kernel args console=ttyPSC?, we wouldn't know which PSC it
47 * will be mapped to.
48 */
49
50 /* OF Platform device Usage :
51 *
52 * This driver is only used for PSCs configured in uart mode. The device
53 * tree will have a node for each PSC in uart mode w/ device_type = "serial"
54 * and "mpc52xx-psc-uart" in the compatible string
55 *
56 * By default, PSC devices are enumerated in the order they are found. However
57 * a particular PSC number can be forces by adding 'device_no = <port#>'
58 * to the device node.
59 *
60 * The driver init all necessary registers to place the PSC in uart mode without
61 * DCD. However, the pin multiplexing aren't changed and should be set either
62 * by the bootloader or in the platform init code.
63 */
64
65 #undef DEBUG
66
67 #include <linux/device.h>
68 #include <linux/module.h>
69 #include <linux/tty.h>
70 #include <linux/serial.h>
71 #include <linux/sysrq.h>
72 #include <linux/console.h>
73 #include <linux/delay.h>
74 #include <linux/io.h>
75 #include <linux/of.h>
76 #include <linux/of_platform.h>
77
78 #include <asm/mpc52xx.h>
79 #include <asm/mpc512x.h>
80 #include <asm/mpc52xx_psc.h>
81
82 #if defined(CONFIG_SERIAL_MPC52xx_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
83 #define SUPPORT_SYSRQ
84 #endif
85
86 #include <linux/serial_core.h>
87
88
89 /* We've been assigned a range on the "Low-density serial ports" major */
90 #define SERIAL_PSC_MAJOR 204
91 #define SERIAL_PSC_MINOR 148
92
93
94 #define ISR_PASS_LIMIT 256 /* Max number of iteration in the interrupt */
95
96
97 static struct uart_port mpc52xx_uart_ports[MPC52xx_PSC_MAXNUM];
98 /* Rem: - We use the read_status_mask as a shadow of
99 * psc->mpc52xx_psc_imr
100 * - It's important that is array is all zero on start as we
101 * use it to know if it's initialized or not ! If it's not sure
102 * it's cleared, then a memset(...,0,...) should be added to
103 * the console_init
104 */
105
106 /* lookup table for matching device nodes to index numbers */
107 static struct device_node *mpc52xx_uart_nodes[MPC52xx_PSC_MAXNUM];
108
109 static void mpc52xx_uart_of_enumerate(void);
110
111
112 #define PSC(port) ((struct mpc52xx_psc __iomem *)((port)->membase))
113
114
115 /* Forward declaration of the interruption handling routine */
116 static irqreturn_t mpc52xx_uart_int(int irq, void *dev_id);
117
118
119 /* Simple macro to test if a port is console or not. This one is taken
120 * for serial_core.c and maybe should be moved to serial_core.h ? */
121 #ifdef CONFIG_SERIAL_CORE_CONSOLE
122 #define uart_console(port) \
123 ((port)->cons && (port)->cons->index == (port)->line)
124 #else
125 #define uart_console(port) (0)
126 #endif
127
128 /* ======================================================================== */
129 /* PSC fifo operations for isolating differences between 52xx and 512x */
130 /* ======================================================================== */
131
132 struct psc_ops {
133 void (*fifo_init)(struct uart_port *port);
134 int (*raw_rx_rdy)(struct uart_port *port);
135 int (*raw_tx_rdy)(struct uart_port *port);
136 int (*rx_rdy)(struct uart_port *port);
137 int (*tx_rdy)(struct uart_port *port);
138 int (*tx_empty)(struct uart_port *port);
139 void (*stop_rx)(struct uart_port *port);
140 void (*start_tx)(struct uart_port *port);
141 void (*stop_tx)(struct uart_port *port);
142 void (*rx_clr_irq)(struct uart_port *port);
143 void (*tx_clr_irq)(struct uart_port *port);
144 void (*write_char)(struct uart_port *port, unsigned char c);
145 unsigned char (*read_char)(struct uart_port *port);
146 void (*cw_disable_ints)(struct uart_port *port);
147 void (*cw_restore_ints)(struct uart_port *port);
148 unsigned long (*getuartclk)(void *p);
149 };
150
151 #ifdef CONFIG_PPC_MPC52xx
152 #define FIFO_52xx(port) ((struct mpc52xx_psc_fifo __iomem *)(PSC(port)+1))
153 static void mpc52xx_psc_fifo_init(struct uart_port *port)
154 {
155 struct mpc52xx_psc __iomem *psc = PSC(port);
156 struct mpc52xx_psc_fifo __iomem *fifo = FIFO_52xx(port);
157
158 /* /32 prescaler */
159 out_be16(&psc->mpc52xx_psc_clock_select, 0xdd00);
160
161 out_8(&fifo->rfcntl, 0x00);
162 out_be16(&fifo->rfalarm, 0x1ff);
163 out_8(&fifo->tfcntl, 0x07);
164 out_be16(&fifo->tfalarm, 0x80);
165
166 port->read_status_mask |= MPC52xx_PSC_IMR_RXRDY | MPC52xx_PSC_IMR_TXRDY;
167 out_be16(&psc->mpc52xx_psc_imr, port->read_status_mask);
168 }
169
170 static int mpc52xx_psc_raw_rx_rdy(struct uart_port *port)
171 {
172 return in_be16(&PSC(port)->mpc52xx_psc_status)
173 & MPC52xx_PSC_SR_RXRDY;
174 }
175
176 static int mpc52xx_psc_raw_tx_rdy(struct uart_port *port)
177 {
178 return in_be16(&PSC(port)->mpc52xx_psc_status)
179 & MPC52xx_PSC_SR_TXRDY;
180 }
181
182
183 static int mpc52xx_psc_rx_rdy(struct uart_port *port)
184 {
185 return in_be16(&PSC(port)->mpc52xx_psc_isr)
186 & port->read_status_mask
187 & MPC52xx_PSC_IMR_RXRDY;
188 }
189
190 static int mpc52xx_psc_tx_rdy(struct uart_port *port)
191 {
192 return in_be16(&PSC(port)->mpc52xx_psc_isr)
193 & port->read_status_mask
194 & MPC52xx_PSC_IMR_TXRDY;
195 }
196
197 static int mpc52xx_psc_tx_empty(struct uart_port *port)
198 {
199 return in_be16(&PSC(port)->mpc52xx_psc_status)
200 & MPC52xx_PSC_SR_TXEMP;
201 }
202
203 static void mpc52xx_psc_start_tx(struct uart_port *port)
204 {
205 port->read_status_mask |= MPC52xx_PSC_IMR_TXRDY;
206 out_be16(&PSC(port)->mpc52xx_psc_imr, port->read_status_mask);
207 }
208
209 static void mpc52xx_psc_stop_tx(struct uart_port *port)
210 {
211 port->read_status_mask &= ~MPC52xx_PSC_IMR_TXRDY;
212 out_be16(&PSC(port)->mpc52xx_psc_imr, port->read_status_mask);
213 }
214
215 static void mpc52xx_psc_stop_rx(struct uart_port *port)
216 {
217 port->read_status_mask &= ~MPC52xx_PSC_IMR_RXRDY;
218 out_be16(&PSC(port)->mpc52xx_psc_imr, port->read_status_mask);
219 }
220
221 static void mpc52xx_psc_rx_clr_irq(struct uart_port *port)
222 {
223 }
224
225 static void mpc52xx_psc_tx_clr_irq(struct uart_port *port)
226 {
227 }
228
229 static void mpc52xx_psc_write_char(struct uart_port *port, unsigned char c)
230 {
231 out_8(&PSC(port)->mpc52xx_psc_buffer_8, c);
232 }
233
234 static unsigned char mpc52xx_psc_read_char(struct uart_port *port)
235 {
236 return in_8(&PSC(port)->mpc52xx_psc_buffer_8);
237 }
238
239 static void mpc52xx_psc_cw_disable_ints(struct uart_port *port)
240 {
241 out_be16(&PSC(port)->mpc52xx_psc_imr, 0);
242 }
243
244 static void mpc52xx_psc_cw_restore_ints(struct uart_port *port)
245 {
246 out_be16(&PSC(port)->mpc52xx_psc_imr, port->read_status_mask);
247 }
248
249 /* Search for bus-frequency property in this node or a parent */
250 static unsigned long mpc52xx_getuartclk(void *p)
251 {
252 /*
253 * 5200 UARTs have a / 32 prescaler
254 * but the generic serial code assumes 16
255 * so return ipb freq / 2
256 */
257 return mpc52xx_find_ipb_freq(p) / 2;
258 }
259
260 static struct psc_ops mpc52xx_psc_ops = {
261 .fifo_init = mpc52xx_psc_fifo_init,
262 .raw_rx_rdy = mpc52xx_psc_raw_rx_rdy,
263 .raw_tx_rdy = mpc52xx_psc_raw_tx_rdy,
264 .rx_rdy = mpc52xx_psc_rx_rdy,
265 .tx_rdy = mpc52xx_psc_tx_rdy,
266 .tx_empty = mpc52xx_psc_tx_empty,
267 .stop_rx = mpc52xx_psc_stop_rx,
268 .start_tx = mpc52xx_psc_start_tx,
269 .stop_tx = mpc52xx_psc_stop_tx,
270 .rx_clr_irq = mpc52xx_psc_rx_clr_irq,
271 .tx_clr_irq = mpc52xx_psc_tx_clr_irq,
272 .write_char = mpc52xx_psc_write_char,
273 .read_char = mpc52xx_psc_read_char,
274 .cw_disable_ints = mpc52xx_psc_cw_disable_ints,
275 .cw_restore_ints = mpc52xx_psc_cw_restore_ints,
276 .getuartclk = mpc52xx_getuartclk,
277 };
278
279 #endif /* CONFIG_MPC52xx */
280
281 #ifdef CONFIG_PPC_MPC512x
282 #define FIFO_512x(port) ((struct mpc512x_psc_fifo __iomem *)(PSC(port)+1))
283 static void mpc512x_psc_fifo_init(struct uart_port *port)
284 {
285 out_be32(&FIFO_512x(port)->txcmd, MPC512x_PSC_FIFO_RESET_SLICE);
286 out_be32(&FIFO_512x(port)->txcmd, MPC512x_PSC_FIFO_ENABLE_SLICE);
287 out_be32(&FIFO_512x(port)->txalarm, 1);
288 out_be32(&FIFO_512x(port)->tximr, 0);
289
290 out_be32(&FIFO_512x(port)->rxcmd, MPC512x_PSC_FIFO_RESET_SLICE);
291 out_be32(&FIFO_512x(port)->rxcmd, MPC512x_PSC_FIFO_ENABLE_SLICE);
292 out_be32(&FIFO_512x(port)->rxalarm, 1);
293 out_be32(&FIFO_512x(port)->rximr, 0);
294
295 out_be32(&FIFO_512x(port)->tximr, MPC512x_PSC_FIFO_ALARM);
296 out_be32(&FIFO_512x(port)->rximr, MPC512x_PSC_FIFO_ALARM);
297 }
298
299 static int mpc512x_psc_raw_rx_rdy(struct uart_port *port)
300 {
301 return !(in_be32(&FIFO_512x(port)->rxsr) & MPC512x_PSC_FIFO_EMPTY);
302 }
303
304 static int mpc512x_psc_raw_tx_rdy(struct uart_port *port)
305 {
306 return !(in_be32(&FIFO_512x(port)->txsr) & MPC512x_PSC_FIFO_FULL);
307 }
308
309 static int mpc512x_psc_rx_rdy(struct uart_port *port)
310 {
311 return in_be32(&FIFO_512x(port)->rxsr)
312 & in_be32(&FIFO_512x(port)->rximr)
313 & MPC512x_PSC_FIFO_ALARM;
314 }
315
316 static int mpc512x_psc_tx_rdy(struct uart_port *port)
317 {
318 return in_be32(&FIFO_512x(port)->txsr)
319 & in_be32(&FIFO_512x(port)->tximr)
320 & MPC512x_PSC_FIFO_ALARM;
321 }
322
323 static int mpc512x_psc_tx_empty(struct uart_port *port)
324 {
325 return in_be32(&FIFO_512x(port)->txsr)
326 & MPC512x_PSC_FIFO_EMPTY;
327 }
328
329 static void mpc512x_psc_stop_rx(struct uart_port *port)
330 {
331 unsigned long rx_fifo_imr;
332
333 rx_fifo_imr = in_be32(&FIFO_512x(port)->rximr);
334 rx_fifo_imr &= ~MPC512x_PSC_FIFO_ALARM;
335 out_be32(&FIFO_512x(port)->rximr, rx_fifo_imr);
336 }
337
338 static void mpc512x_psc_start_tx(struct uart_port *port)
339 {
340 unsigned long tx_fifo_imr;
341
342 tx_fifo_imr = in_be32(&FIFO_512x(port)->tximr);
343 tx_fifo_imr |= MPC512x_PSC_FIFO_ALARM;
344 out_be32(&FIFO_512x(port)->tximr, tx_fifo_imr);
345 }
346
347 static void mpc512x_psc_stop_tx(struct uart_port *port)
348 {
349 unsigned long tx_fifo_imr;
350
351 tx_fifo_imr = in_be32(&FIFO_512x(port)->tximr);
352 tx_fifo_imr &= ~MPC512x_PSC_FIFO_ALARM;
353 out_be32(&FIFO_512x(port)->tximr, tx_fifo_imr);
354 }
355
356 static void mpc512x_psc_rx_clr_irq(struct uart_port *port)
357 {
358 out_be32(&FIFO_512x(port)->rxisr, in_be32(&FIFO_512x(port)->rxisr));
359 }
360
361 static void mpc512x_psc_tx_clr_irq(struct uart_port *port)
362 {
363 out_be32(&FIFO_512x(port)->txisr, in_be32(&FIFO_512x(port)->txisr));
364 }
365
366 static void mpc512x_psc_write_char(struct uart_port *port, unsigned char c)
367 {
368 out_8(&FIFO_512x(port)->txdata_8, c);
369 }
370
371 static unsigned char mpc512x_psc_read_char(struct uart_port *port)
372 {
373 return in_8(&FIFO_512x(port)->rxdata_8);
374 }
375
376 static void mpc512x_psc_cw_disable_ints(struct uart_port *port)
377 {
378 port->read_status_mask =
379 in_be32(&FIFO_512x(port)->tximr) << 16 |
380 in_be32(&FIFO_512x(port)->rximr);
381 out_be32(&FIFO_512x(port)->tximr, 0);
382 out_be32(&FIFO_512x(port)->rximr, 0);
383 }
384
385 static void mpc512x_psc_cw_restore_ints(struct uart_port *port)
386 {
387 out_be32(&FIFO_512x(port)->tximr,
388 (port->read_status_mask >> 16) & 0x7f);
389 out_be32(&FIFO_512x(port)->rximr, port->read_status_mask & 0x7f);
390 }
391
392 static unsigned long mpc512x_getuartclk(void *p)
393 {
394 return mpc512x_find_ips_freq(p);
395 }
396
397 static struct psc_ops mpc512x_psc_ops = {
398 .fifo_init = mpc512x_psc_fifo_init,
399 .raw_rx_rdy = mpc512x_psc_raw_rx_rdy,
400 .raw_tx_rdy = mpc512x_psc_raw_tx_rdy,
401 .rx_rdy = mpc512x_psc_rx_rdy,
402 .tx_rdy = mpc512x_psc_tx_rdy,
403 .tx_empty = mpc512x_psc_tx_empty,
404 .stop_rx = mpc512x_psc_stop_rx,
405 .start_tx = mpc512x_psc_start_tx,
406 .stop_tx = mpc512x_psc_stop_tx,
407 .rx_clr_irq = mpc512x_psc_rx_clr_irq,
408 .tx_clr_irq = mpc512x_psc_tx_clr_irq,
409 .write_char = mpc512x_psc_write_char,
410 .read_char = mpc512x_psc_read_char,
411 .cw_disable_ints = mpc512x_psc_cw_disable_ints,
412 .cw_restore_ints = mpc512x_psc_cw_restore_ints,
413 .getuartclk = mpc512x_getuartclk,
414 };
415 #endif
416
417 static struct psc_ops *psc_ops;
418
419 /* ======================================================================== */
420 /* UART operations */
421 /* ======================================================================== */
422
423 static unsigned int
424 mpc52xx_uart_tx_empty(struct uart_port *port)
425 {
426 return psc_ops->tx_empty(port) ? TIOCSER_TEMT : 0;
427 }
428
429 static void
430 mpc52xx_uart_set_mctrl(struct uart_port *port, unsigned int mctrl)
431 {
432 if (mctrl & TIOCM_RTS)
433 out_8(&PSC(port)->op1, MPC52xx_PSC_OP_RTS);
434 else
435 out_8(&PSC(port)->op0, MPC52xx_PSC_OP_RTS);
436 }
437
438 static unsigned int
439 mpc52xx_uart_get_mctrl(struct uart_port *port)
440 {
441 unsigned int ret = TIOCM_DSR;
442 u8 status = in_8(&PSC(port)->mpc52xx_psc_ipcr);
443
444 if (!(status & MPC52xx_PSC_CTS))
445 ret |= TIOCM_CTS;
446 if (!(status & MPC52xx_PSC_DCD))
447 ret |= TIOCM_CAR;
448
449 return ret;
450 }
451
452 static void
453 mpc52xx_uart_stop_tx(struct uart_port *port)
454 {
455 /* port->lock taken by caller */
456 psc_ops->stop_tx(port);
457 }
458
459 static void
460 mpc52xx_uart_start_tx(struct uart_port *port)
461 {
462 /* port->lock taken by caller */
463 psc_ops->start_tx(port);
464 }
465
466 static void
467 mpc52xx_uart_send_xchar(struct uart_port *port, char ch)
468 {
469 unsigned long flags;
470 spin_lock_irqsave(&port->lock, flags);
471
472 port->x_char = ch;
473 if (ch) {
474 /* Make sure tx interrupts are on */
475 /* Truly necessary ??? They should be anyway */
476 psc_ops->start_tx(port);
477 }
478
479 spin_unlock_irqrestore(&port->lock, flags);
480 }
481
482 static void
483 mpc52xx_uart_stop_rx(struct uart_port *port)
484 {
485 /* port->lock taken by caller */
486 psc_ops->stop_rx(port);
487 }
488
489 static void
490 mpc52xx_uart_enable_ms(struct uart_port *port)
491 {
492 struct mpc52xx_psc __iomem *psc = PSC(port);
493
494 /* clear D_*-bits by reading them */
495 in_8(&psc->mpc52xx_psc_ipcr);
496 /* enable CTS and DCD as IPC interrupts */
497 out_8(&psc->mpc52xx_psc_acr, MPC52xx_PSC_IEC_CTS | MPC52xx_PSC_IEC_DCD);
498
499 port->read_status_mask |= MPC52xx_PSC_IMR_IPC;
500 out_be16(&psc->mpc52xx_psc_imr, port->read_status_mask);
501 }
502
503 static void
504 mpc52xx_uart_break_ctl(struct uart_port *port, int ctl)
505 {
506 unsigned long flags;
507 spin_lock_irqsave(&port->lock, flags);
508
509 if (ctl == -1)
510 out_8(&PSC(port)->command, MPC52xx_PSC_START_BRK);
511 else
512 out_8(&PSC(port)->command, MPC52xx_PSC_STOP_BRK);
513
514 spin_unlock_irqrestore(&port->lock, flags);
515 }
516
517 static int
518 mpc52xx_uart_startup(struct uart_port *port)
519 {
520 struct mpc52xx_psc __iomem *psc = PSC(port);
521 int ret;
522
523 /* Request IRQ */
524 ret = request_irq(port->irq, mpc52xx_uart_int,
525 IRQF_DISABLED | IRQF_SAMPLE_RANDOM | IRQF_SHARED,
526 "mpc52xx_psc_uart", port);
527 if (ret)
528 return ret;
529
530 /* Reset/activate the port, clear and enable interrupts */
531 out_8(&psc->command, MPC52xx_PSC_RST_RX);
532 out_8(&psc->command, MPC52xx_PSC_RST_TX);
533
534 out_be32(&psc->sicr, 0); /* UART mode DCD ignored */
535
536 psc_ops->fifo_init(port);
537
538 out_8(&psc->command, MPC52xx_PSC_TX_ENABLE);
539 out_8(&psc->command, MPC52xx_PSC_RX_ENABLE);
540
541 return 0;
542 }
543
544 static void
545 mpc52xx_uart_shutdown(struct uart_port *port)
546 {
547 struct mpc52xx_psc __iomem *psc = PSC(port);
548
549 /* Shut down the port. Leave TX active if on a console port */
550 out_8(&psc->command, MPC52xx_PSC_RST_RX);
551 if (!uart_console(port))
552 out_8(&psc->command, MPC52xx_PSC_RST_TX);
553
554 port->read_status_mask = 0;
555 out_be16(&psc->mpc52xx_psc_imr, port->read_status_mask);
556
557 /* Release interrupt */
558 free_irq(port->irq, port);
559 }
560
561 static void
562 mpc52xx_uart_set_termios(struct uart_port *port, struct ktermios *new,
563 struct ktermios *old)
564 {
565 struct mpc52xx_psc __iomem *psc = PSC(port);
566 unsigned long flags;
567 unsigned char mr1, mr2;
568 unsigned short ctr;
569 unsigned int j, baud, quot;
570
571 /* Prepare what we're gonna write */
572 mr1 = 0;
573
574 switch (new->c_cflag & CSIZE) {
575 case CS5: mr1 |= MPC52xx_PSC_MODE_5_BITS;
576 break;
577 case CS6: mr1 |= MPC52xx_PSC_MODE_6_BITS;
578 break;
579 case CS7: mr1 |= MPC52xx_PSC_MODE_7_BITS;
580 break;
581 case CS8:
582 default: mr1 |= MPC52xx_PSC_MODE_8_BITS;
583 }
584
585 if (new->c_cflag & PARENB) {
586 mr1 |= (new->c_cflag & PARODD) ?
587 MPC52xx_PSC_MODE_PARODD : MPC52xx_PSC_MODE_PAREVEN;
588 } else
589 mr1 |= MPC52xx_PSC_MODE_PARNONE;
590
591
592 mr2 = 0;
593
594 if (new->c_cflag & CSTOPB)
595 mr2 |= MPC52xx_PSC_MODE_TWO_STOP;
596 else
597 mr2 |= ((new->c_cflag & CSIZE) == CS5) ?
598 MPC52xx_PSC_MODE_ONE_STOP_5_BITS :
599 MPC52xx_PSC_MODE_ONE_STOP;
600
601 if (new->c_cflag & CRTSCTS) {
602 mr1 |= MPC52xx_PSC_MODE_RXRTS;
603 mr2 |= MPC52xx_PSC_MODE_TXCTS;
604 }
605
606 baud = uart_get_baud_rate(port, new, old, 0, port->uartclk/16);
607 quot = uart_get_divisor(port, baud);
608 ctr = quot & 0xffff;
609
610 /* Get the lock */
611 spin_lock_irqsave(&port->lock, flags);
612
613 /* Update the per-port timeout */
614 uart_update_timeout(port, new->c_cflag, baud);
615
616 /* Do our best to flush TX & RX, so we don't lose anything */
617 /* But we don't wait indefinitely ! */
618 j = 5000000; /* Maximum wait */
619 /* FIXME Can't receive chars since set_termios might be called at early
620 * boot for the console, all stuff is not yet ready to receive at that
621 * time and that just makes the kernel oops */
622 /* while (j-- && mpc52xx_uart_int_rx_chars(port)); */
623 while (!mpc52xx_uart_tx_empty(port) && --j)
624 udelay(1);
625
626 if (!j)
627 printk(KERN_ERR "mpc52xx_uart.c: "
628 "Unable to flush RX & TX fifos in-time in set_termios."
629 "Some chars may have been lost.\n");
630
631 /* Reset the TX & RX */
632 out_8(&psc->command, MPC52xx_PSC_RST_RX);
633 out_8(&psc->command, MPC52xx_PSC_RST_TX);
634
635 /* Send new mode settings */
636 out_8(&psc->command, MPC52xx_PSC_SEL_MODE_REG_1);
637 out_8(&psc->mode, mr1);
638 out_8(&psc->mode, mr2);
639 out_8(&psc->ctur, ctr >> 8);
640 out_8(&psc->ctlr, ctr & 0xff);
641
642 if (UART_ENABLE_MS(port, new->c_cflag))
643 mpc52xx_uart_enable_ms(port);
644
645 /* Reenable TX & RX */
646 out_8(&psc->command, MPC52xx_PSC_TX_ENABLE);
647 out_8(&psc->command, MPC52xx_PSC_RX_ENABLE);
648
649 /* We're all set, release the lock */
650 spin_unlock_irqrestore(&port->lock, flags);
651 }
652
653 static const char *
654 mpc52xx_uart_type(struct uart_port *port)
655 {
656 return port->type == PORT_MPC52xx ? "MPC52xx PSC" : NULL;
657 }
658
659 static void
660 mpc52xx_uart_release_port(struct uart_port *port)
661 {
662 /* remapped by us ? */
663 if (port->flags & UPF_IOREMAP) {
664 iounmap(port->membase);
665 port->membase = NULL;
666 }
667
668 release_mem_region(port->mapbase, sizeof(struct mpc52xx_psc));
669 }
670
671 static int
672 mpc52xx_uart_request_port(struct uart_port *port)
673 {
674 int err;
675
676 if (port->flags & UPF_IOREMAP) /* Need to remap ? */
677 port->membase = ioremap(port->mapbase,
678 sizeof(struct mpc52xx_psc));
679
680 if (!port->membase)
681 return -EINVAL;
682
683 err = request_mem_region(port->mapbase, sizeof(struct mpc52xx_psc),
684 "mpc52xx_psc_uart") != NULL ? 0 : -EBUSY;
685
686 if (err && (port->flags & UPF_IOREMAP)) {
687 iounmap(port->membase);
688 port->membase = NULL;
689 }
690
691 return err;
692 }
693
694 static void
695 mpc52xx_uart_config_port(struct uart_port *port, int flags)
696 {
697 if ((flags & UART_CONFIG_TYPE)
698 && (mpc52xx_uart_request_port(port) == 0))
699 port->type = PORT_MPC52xx;
700 }
701
702 static int
703 mpc52xx_uart_verify_port(struct uart_port *port, struct serial_struct *ser)
704 {
705 if (ser->type != PORT_UNKNOWN && ser->type != PORT_MPC52xx)
706 return -EINVAL;
707
708 if ((ser->irq != port->irq) ||
709 (ser->io_type != SERIAL_IO_MEM) ||
710 (ser->baud_base != port->uartclk) ||
711 (ser->iomem_base != (void *)port->mapbase) ||
712 (ser->hub6 != 0))
713 return -EINVAL;
714
715 return 0;
716 }
717
718
719 static struct uart_ops mpc52xx_uart_ops = {
720 .tx_empty = mpc52xx_uart_tx_empty,
721 .set_mctrl = mpc52xx_uart_set_mctrl,
722 .get_mctrl = mpc52xx_uart_get_mctrl,
723 .stop_tx = mpc52xx_uart_stop_tx,
724 .start_tx = mpc52xx_uart_start_tx,
725 .send_xchar = mpc52xx_uart_send_xchar,
726 .stop_rx = mpc52xx_uart_stop_rx,
727 .enable_ms = mpc52xx_uart_enable_ms,
728 .break_ctl = mpc52xx_uart_break_ctl,
729 .startup = mpc52xx_uart_startup,
730 .shutdown = mpc52xx_uart_shutdown,
731 .set_termios = mpc52xx_uart_set_termios,
732 /* .pm = mpc52xx_uart_pm, Not supported yet */
733 /* .set_wake = mpc52xx_uart_set_wake, Not supported yet */
734 .type = mpc52xx_uart_type,
735 .release_port = mpc52xx_uart_release_port,
736 .request_port = mpc52xx_uart_request_port,
737 .config_port = mpc52xx_uart_config_port,
738 .verify_port = mpc52xx_uart_verify_port
739 };
740
741
742 /* ======================================================================== */
743 /* Interrupt handling */
744 /* ======================================================================== */
745
746 static inline int
747 mpc52xx_uart_int_rx_chars(struct uart_port *port)
748 {
749 struct tty_struct *tty = port->info->port.tty;
750 unsigned char ch, flag;
751 unsigned short status;
752
753 /* While we can read, do so ! */
754 while (psc_ops->raw_rx_rdy(port)) {
755 /* Get the char */
756 ch = psc_ops->read_char(port);
757
758 /* Handle sysreq char */
759 #ifdef SUPPORT_SYSRQ
760 if (uart_handle_sysrq_char(port, ch)) {
761 port->sysrq = 0;
762 continue;
763 }
764 #endif
765
766 /* Store it */
767
768 flag = TTY_NORMAL;
769 port->icount.rx++;
770
771 status = in_be16(&PSC(port)->mpc52xx_psc_status);
772
773 if (status & (MPC52xx_PSC_SR_PE |
774 MPC52xx_PSC_SR_FE |
775 MPC52xx_PSC_SR_RB)) {
776
777 if (status & MPC52xx_PSC_SR_RB) {
778 flag = TTY_BREAK;
779 uart_handle_break(port);
780 port->icount.brk++;
781 } else if (status & MPC52xx_PSC_SR_PE) {
782 flag = TTY_PARITY;
783 port->icount.parity++;
784 }
785 else if (status & MPC52xx_PSC_SR_FE) {
786 flag = TTY_FRAME;
787 port->icount.frame++;
788 }
789
790 /* Clear error condition */
791 out_8(&PSC(port)->command, MPC52xx_PSC_RST_ERR_STAT);
792
793 }
794 tty_insert_flip_char(tty, ch, flag);
795 if (status & MPC52xx_PSC_SR_OE) {
796 /*
797 * Overrun is special, since it's
798 * reported immediately, and doesn't
799 * affect the current character
800 */
801 tty_insert_flip_char(tty, 0, TTY_OVERRUN);
802 port->icount.overrun++;
803 }
804 }
805
806 spin_unlock(&port->lock);
807 tty_flip_buffer_push(tty);
808 spin_lock(&port->lock);
809
810 return psc_ops->raw_rx_rdy(port);
811 }
812
813 static inline int
814 mpc52xx_uart_int_tx_chars(struct uart_port *port)
815 {
816 struct circ_buf *xmit = &port->info->xmit;
817
818 /* Process out of band chars */
819 if (port->x_char) {
820 psc_ops->write_char(port, port->x_char);
821 port->icount.tx++;
822 port->x_char = 0;
823 return 1;
824 }
825
826 /* Nothing to do ? */
827 if (uart_circ_empty(xmit) || uart_tx_stopped(port)) {
828 mpc52xx_uart_stop_tx(port);
829 return 0;
830 }
831
832 /* Send chars */
833 while (psc_ops->raw_tx_rdy(port)) {
834 psc_ops->write_char(port, xmit->buf[xmit->tail]);
835 xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
836 port->icount.tx++;
837 if (uart_circ_empty(xmit))
838 break;
839 }
840
841 /* Wake up */
842 if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
843 uart_write_wakeup(port);
844
845 /* Maybe we're done after all */
846 if (uart_circ_empty(xmit)) {
847 mpc52xx_uart_stop_tx(port);
848 return 0;
849 }
850
851 return 1;
852 }
853
854 static irqreturn_t
855 mpc52xx_uart_int(int irq, void *dev_id)
856 {
857 struct uart_port *port = dev_id;
858 unsigned long pass = ISR_PASS_LIMIT;
859 unsigned int keepgoing;
860 u8 status;
861
862 spin_lock(&port->lock);
863
864 /* While we have stuff to do, we continue */
865 do {
866 /* If we don't find anything to do, we stop */
867 keepgoing = 0;
868
869 psc_ops->rx_clr_irq(port);
870 if (psc_ops->rx_rdy(port))
871 keepgoing |= mpc52xx_uart_int_rx_chars(port);
872
873 psc_ops->tx_clr_irq(port);
874 if (psc_ops->tx_rdy(port))
875 keepgoing |= mpc52xx_uart_int_tx_chars(port);
876
877 status = in_8(&PSC(port)->mpc52xx_psc_ipcr);
878 if (status & MPC52xx_PSC_D_DCD)
879 uart_handle_dcd_change(port, !(status & MPC52xx_PSC_DCD));
880
881 if (status & MPC52xx_PSC_D_CTS)
882 uart_handle_cts_change(port, !(status & MPC52xx_PSC_CTS));
883
884 /* Limit number of iteration */
885 if (!(--pass))
886 keepgoing = 0;
887
888 } while (keepgoing);
889
890 spin_unlock(&port->lock);
891
892 return IRQ_HANDLED;
893 }
894
895
896 /* ======================================================================== */
897 /* Console ( if applicable ) */
898 /* ======================================================================== */
899
900 #ifdef CONFIG_SERIAL_MPC52xx_CONSOLE
901
902 static void __init
903 mpc52xx_console_get_options(struct uart_port *port,
904 int *baud, int *parity, int *bits, int *flow)
905 {
906 struct mpc52xx_psc __iomem *psc = PSC(port);
907 unsigned char mr1;
908
909 pr_debug("mpc52xx_console_get_options(port=%p)\n", port);
910
911 /* Read the mode registers */
912 out_8(&psc->command, MPC52xx_PSC_SEL_MODE_REG_1);
913 mr1 = in_8(&psc->mode);
914
915 /* CT{U,L}R are write-only ! */
916 *baud = CONFIG_SERIAL_MPC52xx_CONSOLE_BAUD;
917
918 /* Parse them */
919 switch (mr1 & MPC52xx_PSC_MODE_BITS_MASK) {
920 case MPC52xx_PSC_MODE_5_BITS:
921 *bits = 5;
922 break;
923 case MPC52xx_PSC_MODE_6_BITS:
924 *bits = 6;
925 break;
926 case MPC52xx_PSC_MODE_7_BITS:
927 *bits = 7;
928 break;
929 case MPC52xx_PSC_MODE_8_BITS:
930 default:
931 *bits = 8;
932 }
933
934 if (mr1 & MPC52xx_PSC_MODE_PARNONE)
935 *parity = 'n';
936 else
937 *parity = mr1 & MPC52xx_PSC_MODE_PARODD ? 'o' : 'e';
938 }
939
940 static void
941 mpc52xx_console_write(struct console *co, const char *s, unsigned int count)
942 {
943 struct uart_port *port = &mpc52xx_uart_ports[co->index];
944 unsigned int i, j;
945
946 /* Disable interrupts */
947 psc_ops->cw_disable_ints(port);
948
949 /* Wait the TX buffer to be empty */
950 j = 5000000; /* Maximum wait */
951 while (!mpc52xx_uart_tx_empty(port) && --j)
952 udelay(1);
953
954 /* Write all the chars */
955 for (i = 0; i < count; i++, s++) {
956 /* Line return handling */
957 if (*s == '\n')
958 psc_ops->write_char(port, '\r');
959
960 /* Send the char */
961 psc_ops->write_char(port, *s);
962
963 /* Wait the TX buffer to be empty */
964 j = 20000; /* Maximum wait */
965 while (!mpc52xx_uart_tx_empty(port) && --j)
966 udelay(1);
967 }
968
969 /* Restore interrupt state */
970 psc_ops->cw_restore_ints(port);
971 }
972
973
974 static int __init
975 mpc52xx_console_setup(struct console *co, char *options)
976 {
977 struct uart_port *port = &mpc52xx_uart_ports[co->index];
978 struct device_node *np = mpc52xx_uart_nodes[co->index];
979 unsigned int uartclk;
980 struct resource res;
981 int ret;
982
983 int baud = CONFIG_SERIAL_MPC52xx_CONSOLE_BAUD;
984 int bits = 8;
985 int parity = 'n';
986 int flow = 'n';
987
988 pr_debug("mpc52xx_console_setup co=%p, co->index=%i, options=%s\n",
989 co, co->index, options);
990
991 if ((co->index < 0) || (co->index > MPC52xx_PSC_MAXNUM)) {
992 pr_debug("PSC%x out of range\n", co->index);
993 return -EINVAL;
994 }
995
996 if (!np) {
997 pr_debug("PSC%x not found in device tree\n", co->index);
998 return -EINVAL;
999 }
1000
1001 pr_debug("Console on ttyPSC%x is %s\n",
1002 co->index, mpc52xx_uart_nodes[co->index]->full_name);
1003
1004 /* Fetch register locations */
1005 ret = of_address_to_resource(np, 0, &res);
1006 if (ret) {
1007 pr_debug("Could not get resources for PSC%x\n", co->index);
1008 return ret;
1009 }
1010
1011 uartclk = psc_ops->getuartclk(np);
1012 if (uartclk == 0) {
1013 pr_debug("Could not find uart clock frequency!\n");
1014 return -EINVAL;
1015 }
1016
1017 /* Basic port init. Needed since we use some uart_??? func before
1018 * real init for early access */
1019 spin_lock_init(&port->lock);
1020 port->uartclk = uartclk;
1021 port->ops = &mpc52xx_uart_ops;
1022 port->mapbase = res.start;
1023 port->membase = ioremap(res.start, sizeof(struct mpc52xx_psc));
1024 port->irq = irq_of_parse_and_map(np, 0);
1025
1026 if (port->membase == NULL)
1027 return -EINVAL;
1028
1029 pr_debug("mpc52xx-psc uart at %p, mapped to %p, irq=%x, freq=%i\n",
1030 (void *)port->mapbase, port->membase,
1031 port->irq, port->uartclk);
1032
1033 /* Setup the port parameters accoding to options */
1034 if (options)
1035 uart_parse_options(options, &baud, &parity, &bits, &flow);
1036 else
1037 mpc52xx_console_get_options(port, &baud, &parity, &bits, &flow);
1038
1039 pr_debug("Setting console parameters: %i %i%c1 flow=%c\n",
1040 baud, bits, parity, flow);
1041
1042 return uart_set_options(port, co, baud, parity, bits, flow);
1043 }
1044
1045
1046 static struct uart_driver mpc52xx_uart_driver;
1047
1048 static struct console mpc52xx_console = {
1049 .name = "ttyPSC",
1050 .write = mpc52xx_console_write,
1051 .device = uart_console_device,
1052 .setup = mpc52xx_console_setup,
1053 .flags = CON_PRINTBUFFER,
1054 .index = -1, /* Specified on the cmdline (e.g. console=ttyPSC0) */
1055 .data = &mpc52xx_uart_driver,
1056 };
1057
1058
1059 static int __init
1060 mpc52xx_console_init(void)
1061 {
1062 mpc52xx_uart_of_enumerate();
1063 register_console(&mpc52xx_console);
1064 return 0;
1065 }
1066
1067 console_initcall(mpc52xx_console_init);
1068
1069 #define MPC52xx_PSC_CONSOLE &mpc52xx_console
1070 #else
1071 #define MPC52xx_PSC_CONSOLE NULL
1072 #endif
1073
1074
1075 /* ======================================================================== */
1076 /* UART Driver */
1077 /* ======================================================================== */
1078
1079 static struct uart_driver mpc52xx_uart_driver = {
1080 .driver_name = "mpc52xx_psc_uart",
1081 .dev_name = "ttyPSC",
1082 .major = SERIAL_PSC_MAJOR,
1083 .minor = SERIAL_PSC_MINOR,
1084 .nr = MPC52xx_PSC_MAXNUM,
1085 .cons = MPC52xx_PSC_CONSOLE,
1086 };
1087
1088 /* ======================================================================== */
1089 /* OF Platform Driver */
1090 /* ======================================================================== */
1091
1092 static struct of_device_id mpc52xx_uart_of_match[] = {
1093 #ifdef CONFIG_PPC_MPC52xx
1094 { .compatible = "fsl,mpc5200-psc-uart", .data = &mpc52xx_psc_ops, },
1095 /* binding used by old lite5200 device trees: */
1096 { .compatible = "mpc5200-psc-uart", .data = &mpc52xx_psc_ops, },
1097 /* binding used by efika: */
1098 { .compatible = "mpc5200-serial", .data = &mpc52xx_psc_ops, },
1099 #endif
1100 #ifdef CONFIG_PPC_MPC512x
1101 { .compatible = "fsl,mpc5121-psc-uart", .data = &mpc512x_psc_ops, },
1102 #endif
1103 {},
1104 };
1105
1106 static int __devinit
1107 mpc52xx_uart_of_probe(struct of_device *op, const struct of_device_id *match)
1108 {
1109 int idx = -1;
1110 unsigned int uartclk;
1111 struct uart_port *port = NULL;
1112 struct resource res;
1113 int ret;
1114
1115 dev_dbg(&op->dev, "mpc52xx_uart_probe(op=%p, match=%p)\n", op, match);
1116
1117 /* Check validity & presence */
1118 for (idx = 0; idx < MPC52xx_PSC_MAXNUM; idx++)
1119 if (mpc52xx_uart_nodes[idx] == op->node)
1120 break;
1121 if (idx >= MPC52xx_PSC_MAXNUM)
1122 return -EINVAL;
1123 pr_debug("Found %s assigned to ttyPSC%x\n",
1124 mpc52xx_uart_nodes[idx]->full_name, idx);
1125
1126 uartclk = psc_ops->getuartclk(op->node);
1127 if (uartclk == 0) {
1128 dev_dbg(&op->dev, "Could not find uart clock frequency!\n");
1129 return -EINVAL;
1130 }
1131
1132 /* Init the port structure */
1133 port = &mpc52xx_uart_ports[idx];
1134
1135 spin_lock_init(&port->lock);
1136 port->uartclk = uartclk;
1137 port->fifosize = 512;
1138 port->iotype = UPIO_MEM;
1139 port->flags = UPF_BOOT_AUTOCONF |
1140 (uart_console(port) ? 0 : UPF_IOREMAP);
1141 port->line = idx;
1142 port->ops = &mpc52xx_uart_ops;
1143 port->dev = &op->dev;
1144
1145 /* Search for IRQ and mapbase */
1146 ret = of_address_to_resource(op->node, 0, &res);
1147 if (ret)
1148 return ret;
1149
1150 port->mapbase = res.start;
1151 if (!port->mapbase) {
1152 dev_dbg(&op->dev, "Could not allocate resources for PSC\n");
1153 return -EINVAL;
1154 }
1155
1156 port->irq = irq_of_parse_and_map(op->node, 0);
1157 if (port->irq == NO_IRQ) {
1158 dev_dbg(&op->dev, "Could not get irq\n");
1159 return -EINVAL;
1160 }
1161
1162 dev_dbg(&op->dev, "mpc52xx-psc uart at %p, irq=%x, freq=%i\n",
1163 (void *)port->mapbase, port->irq, port->uartclk);
1164
1165 /* Add the port to the uart sub-system */
1166 ret = uart_add_one_port(&mpc52xx_uart_driver, port);
1167 if (ret) {
1168 irq_dispose_mapping(port->irq);
1169 return ret;
1170 }
1171
1172 dev_set_drvdata(&op->dev, (void *)port);
1173 return 0;
1174 }
1175
1176 static int
1177 mpc52xx_uart_of_remove(struct of_device *op)
1178 {
1179 struct uart_port *port = dev_get_drvdata(&op->dev);
1180 dev_set_drvdata(&op->dev, NULL);
1181
1182 if (port) {
1183 uart_remove_one_port(&mpc52xx_uart_driver, port);
1184 irq_dispose_mapping(port->irq);
1185 }
1186
1187 return 0;
1188 }
1189
1190 #ifdef CONFIG_PM
1191 static int
1192 mpc52xx_uart_of_suspend(struct of_device *op, pm_message_t state)
1193 {
1194 struct uart_port *port = (struct uart_port *) dev_get_drvdata(&op->dev);
1195
1196 if (port)
1197 uart_suspend_port(&mpc52xx_uart_driver, port);
1198
1199 return 0;
1200 }
1201
1202 static int
1203 mpc52xx_uart_of_resume(struct of_device *op)
1204 {
1205 struct uart_port *port = (struct uart_port *) dev_get_drvdata(&op->dev);
1206
1207 if (port)
1208 uart_resume_port(&mpc52xx_uart_driver, port);
1209
1210 return 0;
1211 }
1212 #endif
1213
1214 static void
1215 mpc52xx_uart_of_assign(struct device_node *np, int idx)
1216 {
1217 int free_idx = -1;
1218 int i;
1219
1220 /* Find the first free node */
1221 for (i = 0; i < MPC52xx_PSC_MAXNUM; i++) {
1222 if (mpc52xx_uart_nodes[i] == NULL) {
1223 free_idx = i;
1224 break;
1225 }
1226 }
1227
1228 if ((idx < 0) || (idx >= MPC52xx_PSC_MAXNUM))
1229 idx = free_idx;
1230
1231 if (idx < 0)
1232 return; /* No free slot; abort */
1233
1234 of_node_get(np);
1235 /* If the slot is already occupied, then swap slots */
1236 if (mpc52xx_uart_nodes[idx] && (free_idx != -1))
1237 mpc52xx_uart_nodes[free_idx] = mpc52xx_uart_nodes[idx];
1238 mpc52xx_uart_nodes[idx] = np;
1239 }
1240
1241 static void
1242 mpc52xx_uart_of_enumerate(void)
1243 {
1244 static int enum_done;
1245 struct device_node *np;
1246 const unsigned int *devno;
1247 const struct of_device_id *match;
1248 int i;
1249
1250 if (enum_done)
1251 return;
1252
1253 for_each_node_by_type(np, "serial") {
1254 match = of_match_node(mpc52xx_uart_of_match, np);
1255 if (!match)
1256 continue;
1257
1258 psc_ops = match->data;
1259
1260 /* Is a particular device number requested? */
1261 devno = of_get_property(np, "port-number", NULL);
1262 mpc52xx_uart_of_assign(np, devno ? *devno : -1);
1263 }
1264
1265 enum_done = 1;
1266
1267 for (i = 0; i < MPC52xx_PSC_MAXNUM; i++) {
1268 if (mpc52xx_uart_nodes[i])
1269 pr_debug("%s assigned to ttyPSC%x\n",
1270 mpc52xx_uart_nodes[i]->full_name, i);
1271 }
1272 }
1273
1274 MODULE_DEVICE_TABLE(of, mpc52xx_uart_of_match);
1275
1276 static struct of_platform_driver mpc52xx_uart_of_driver = {
1277 .match_table = mpc52xx_uart_of_match,
1278 .probe = mpc52xx_uart_of_probe,
1279 .remove = mpc52xx_uart_of_remove,
1280 #ifdef CONFIG_PM
1281 .suspend = mpc52xx_uart_of_suspend,
1282 .resume = mpc52xx_uart_of_resume,
1283 #endif
1284 .driver = {
1285 .name = "mpc52xx-psc-uart",
1286 },
1287 };
1288
1289
1290 /* ======================================================================== */
1291 /* Module */
1292 /* ======================================================================== */
1293
1294 static int __init
1295 mpc52xx_uart_init(void)
1296 {
1297 int ret;
1298
1299 printk(KERN_INFO "Serial: MPC52xx PSC UART driver\n");
1300
1301 ret = uart_register_driver(&mpc52xx_uart_driver);
1302 if (ret) {
1303 printk(KERN_ERR "%s: uart_register_driver failed (%i)\n",
1304 __FILE__, ret);
1305 return ret;
1306 }
1307
1308 mpc52xx_uart_of_enumerate();
1309
1310 ret = of_register_platform_driver(&mpc52xx_uart_of_driver);
1311 if (ret) {
1312 printk(KERN_ERR "%s: of_register_platform_driver failed (%i)\n",
1313 __FILE__, ret);
1314 uart_unregister_driver(&mpc52xx_uart_driver);
1315 return ret;
1316 }
1317
1318 return 0;
1319 }
1320
1321 static void __exit
1322 mpc52xx_uart_exit(void)
1323 {
1324 of_unregister_platform_driver(&mpc52xx_uart_of_driver);
1325 uart_unregister_driver(&mpc52xx_uart_driver);
1326 }
1327
1328
1329 module_init(mpc52xx_uart_init);
1330 module_exit(mpc52xx_uart_exit);
1331
1332 MODULE_AUTHOR("Sylvain Munaut <tnt@246tNt.com>");
1333 MODULE_DESCRIPTION("Freescale MPC52xx PSC UART");
1334 MODULE_LICENSE("GPL");
This page took 0.058016 seconds and 6 git commands to generate.