projects / deliverable / linux.git / blob
? search:
summary | shortlog | log | commit | commitdiff | tree
blame | history | raw | HEAD
Merge branch 'next-samsung-board' into next-samsung-devel-2
[deliverable/linux.git] / drivers / spi / spi-s3c64xx.c
1 /*
2 * Copyright (C) 2009 Samsung Electronics Ltd.
3 * Jaswinder Singh <jassi.brar@samsung.com>
4 *
5 * This program is free software; you can redistribute it and/or modify
6 * it under the terms of the GNU General Public License as published by
7 * the Free Software Foundation; either version 2 of the License, or
8 * (at your option) any later version.
9 *
10 * This program is distributed in the hope that it will be useful,
11 * but WITHOUT ANY WARRANTY; without even the implied warranty of
12 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13 * GNU General Public License for more details.
14 *
15 * You should have received a copy of the GNU General Public License
16 * along with this program; if not, write to the Free Software
17 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
18 */
19
20 #include <linux/init.h>
21 #include <linux/module.h>
22 #include <linux/workqueue.h>
23 #include <linux/delay.h>
24 #include <linux/clk.h>
25 #include <linux/dma-mapping.h>
26 #include <linux/platform_device.h>
27 #include <linux/spi/spi.h>
28
29 #include <mach/dma.h>
30 #include <plat/s3c64xx-spi.h>
31
32 /* Registers and bit-fields */
33
34 #define S3C64XX_SPI_CH_CFG 0x00
35 #define S3C64XX_SPI_CLK_CFG 0x04
36 #define S3C64XX_SPI_MODE_CFG 0x08
37 #define S3C64XX_SPI_SLAVE_SEL 0x0C
38 #define S3C64XX_SPI_INT_EN 0x10
39 #define S3C64XX_SPI_STATUS 0x14
40 #define S3C64XX_SPI_TX_DATA 0x18
41 #define S3C64XX_SPI_RX_DATA 0x1C
42 #define S3C64XX_SPI_PACKET_CNT 0x20
43 #define S3C64XX_SPI_PENDING_CLR 0x24
44 #define S3C64XX_SPI_SWAP_CFG 0x28
45 #define S3C64XX_SPI_FB_CLK 0x2C
46
47 #define S3C64XX_SPI_CH_HS_EN (1<<6) /* High Speed Enable */
48 #define S3C64XX_SPI_CH_SW_RST (1<<5)
49 #define S3C64XX_SPI_CH_SLAVE (1<<4)
50 #define S3C64XX_SPI_CPOL_L (1<<3)
51 #define S3C64XX_SPI_CPHA_B (1<<2)
52 #define S3C64XX_SPI_CH_RXCH_ON (1<<1)
53 #define S3C64XX_SPI_CH_TXCH_ON (1<<0)
54
55 #define S3C64XX_SPI_CLKSEL_SRCMSK (3<<9)
56 #define S3C64XX_SPI_CLKSEL_SRCSHFT 9
57 #define S3C64XX_SPI_ENCLK_ENABLE (1<<8)
58 #define S3C64XX_SPI_PSR_MASK 0xff
59
60 #define S3C64XX_SPI_MODE_CH_TSZ_BYTE (0<<29)
61 #define S3C64XX_SPI_MODE_CH_TSZ_HALFWORD (1<<29)
62 #define S3C64XX_SPI_MODE_CH_TSZ_WORD (2<<29)
63 #define S3C64XX_SPI_MODE_CH_TSZ_MASK (3<<29)
64 #define S3C64XX_SPI_MODE_BUS_TSZ_BYTE (0<<17)
65 #define S3C64XX_SPI_MODE_BUS_TSZ_HALFWORD (1<<17)
66 #define S3C64XX_SPI_MODE_BUS_TSZ_WORD (2<<17)
67 #define S3C64XX_SPI_MODE_BUS_TSZ_MASK (3<<17)
68 #define S3C64XX_SPI_MODE_RXDMA_ON (1<<2)
69 #define S3C64XX_SPI_MODE_TXDMA_ON (1<<1)
70 #define S3C64XX_SPI_MODE_4BURST (1<<0)
71
72 #define S3C64XX_SPI_SLAVE_AUTO (1<<1)
73 #define S3C64XX_SPI_SLAVE_SIG_INACT (1<<0)
74
75 #define S3C64XX_SPI_ACT(c) writel(0, (c)->regs + S3C64XX_SPI_SLAVE_SEL)
76
77 #define S3C64XX_SPI_DEACT(c) writel(S3C64XX_SPI_SLAVE_SIG_INACT, \
78 (c)->regs + S3C64XX_SPI_SLAVE_SEL)
79
80 #define S3C64XX_SPI_INT_TRAILING_EN (1<<6)
81 #define S3C64XX_SPI_INT_RX_OVERRUN_EN (1<<5)
82 #define S3C64XX_SPI_INT_RX_UNDERRUN_EN (1<<4)
83 #define S3C64XX_SPI_INT_TX_OVERRUN_EN (1<<3)
84 #define S3C64XX_SPI_INT_TX_UNDERRUN_EN (1<<2)
85 #define S3C64XX_SPI_INT_RX_FIFORDY_EN (1<<1)
86 #define S3C64XX_SPI_INT_TX_FIFORDY_EN (1<<0)
87
88 #define S3C64XX_SPI_ST_RX_OVERRUN_ERR (1<<5)
89 #define S3C64XX_SPI_ST_RX_UNDERRUN_ERR (1<<4)
90 #define S3C64XX_SPI_ST_TX_OVERRUN_ERR (1<<3)
91 #define S3C64XX_SPI_ST_TX_UNDERRUN_ERR (1<<2)
92 #define S3C64XX_SPI_ST_RX_FIFORDY (1<<1)
93 #define S3C64XX_SPI_ST_TX_FIFORDY (1<<0)
94
95 #define S3C64XX_SPI_PACKET_CNT_EN (1<<16)
96
97 #define S3C64XX_SPI_PND_TX_UNDERRUN_CLR (1<<4)
98 #define S3C64XX_SPI_PND_TX_OVERRUN_CLR (1<<3)
99 #define S3C64XX_SPI_PND_RX_UNDERRUN_CLR (1<<2)
100 #define S3C64XX_SPI_PND_RX_OVERRUN_CLR (1<<1)
101 #define S3C64XX_SPI_PND_TRAILING_CLR (1<<0)
102
103 #define S3C64XX_SPI_SWAP_RX_HALF_WORD (1<<7)
104 #define S3C64XX_SPI_SWAP_RX_BYTE (1<<6)
105 #define S3C64XX_SPI_SWAP_RX_BIT (1<<5)
106 #define S3C64XX_SPI_SWAP_RX_EN (1<<4)
107 #define S3C64XX_SPI_SWAP_TX_HALF_WORD (1<<3)
108 #define S3C64XX_SPI_SWAP_TX_BYTE (1<<2)
109 #define S3C64XX_SPI_SWAP_TX_BIT (1<<1)
110 #define S3C64XX_SPI_SWAP_TX_EN (1<<0)
111
112 #define S3C64XX_SPI_FBCLK_MSK (3<<0)
113
114 #define S3C64XX_SPI_ST_TRLCNTZ(v, i) ((((v) >> (i)->rx_lvl_offset) & \
115 (((i)->fifo_lvl_mask + 1))) \
116 ? 1 : 0)
117
118 #define S3C64XX_SPI_ST_TX_DONE(v, i) (((v) & (1 << (i)->tx_st_done)) ? 1 : 0)
119 #define TX_FIFO_LVL(v, i) (((v) >> 6) & (i)->fifo_lvl_mask)
120 #define RX_FIFO_LVL(v, i) (((v) >> (i)->rx_lvl_offset) & (i)->fifo_lvl_mask)
121
122 #define S3C64XX_SPI_MAX_TRAILCNT 0x3ff
123 #define S3C64XX_SPI_TRAILCNT_OFF 19
124
125 #define S3C64XX_SPI_TRAILCNT S3C64XX_SPI_MAX_TRAILCNT
126
127 #define msecs_to_loops(t) (loops_per_jiffy / 1000 * HZ * t)
128
129 #define SUSPND (1<<0)
130 #define SPIBUSY (1<<1)
131 #define RXBUSY (1<<2)
132 #define TXBUSY (1<<3)
133
134 /**
135 * struct s3c64xx_spi_driver_data - Runtime info holder for SPI driver.
136 * @clk: Pointer to the spi clock.
137 * @src_clk: Pointer to the clock used to generate SPI signals.
138 * @master: Pointer to the SPI Protocol master.
139 * @workqueue: Work queue for the SPI xfer requests.
140 * @cntrlr_info: Platform specific data for the controller this driver manages.
141 * @tgl_spi: Pointer to the last CS left untoggled by the cs_change hint.
142 * @work: Work
143 * @queue: To log SPI xfer requests.
144 * @lock: Controller specific lock.
145 * @state: Set of FLAGS to indicate status.
146 * @rx_dmach: Controller's DMA channel for Rx.
147 * @tx_dmach: Controller's DMA channel for Tx.
148 * @sfr_start: BUS address of SPI controller regs.
149 * @regs: Pointer to ioremap'ed controller registers.
150 * @xfer_completion: To indicate completion of xfer task.
151 * @cur_mode: Stores the active configuration of the controller.
152 * @cur_bpw: Stores the active bits per word settings.
153 * @cur_speed: Stores the active xfer clock speed.
154 */
155 struct s3c64xx_spi_driver_data {
156 void __iomem *regs;
157 struct clk *clk;
158 struct clk *src_clk;
159 struct platform_device *pdev;
160 struct spi_master *master;
161 struct workqueue_struct *workqueue;
162 struct s3c64xx_spi_info *cntrlr_info;
163 struct spi_device *tgl_spi;
164 struct work_struct work;
165 struct list_head queue;
166 spinlock_t lock;
167 enum dma_ch rx_dmach;
168 enum dma_ch tx_dmach;
169 unsigned long sfr_start;
170 struct completion xfer_completion;
171 unsigned state;
172 unsigned cur_mode, cur_bpw;
173 unsigned cur_speed;
174 };
175
176 static struct s3c2410_dma_client s3c64xx_spi_dma_client = {
177 .name = "samsung-spi-dma",
178 };
179
180 static void flush_fifo(struct s3c64xx_spi_driver_data *sdd)
181 {
182 struct s3c64xx_spi_info *sci = sdd->cntrlr_info;
183 void __iomem *regs = sdd->regs;
184 unsigned long loops;
185 u32 val;
186
187 writel(0, regs + S3C64XX_SPI_PACKET_CNT);
188
189 val = readl(regs + S3C64XX_SPI_CH_CFG);
190 val |= S3C64XX_SPI_CH_SW_RST;
191 val &= ~S3C64XX_SPI_CH_HS_EN;
192 writel(val, regs + S3C64XX_SPI_CH_CFG);
193
194 /* Flush TxFIFO*/
195 loops = msecs_to_loops(1);
196 do {
197 val = readl(regs + S3C64XX_SPI_STATUS);
198 } while (TX_FIFO_LVL(val, sci) && loops--);
199
200 if (loops == 0)
201 dev_warn(&sdd->pdev->dev, "Timed out flushing TX FIFO\n");
202
203 /* Flush RxFIFO*/
204 loops = msecs_to_loops(1);
205 do {
206 val = readl(regs + S3C64XX_SPI_STATUS);
207 if (RX_FIFO_LVL(val, sci))
208 readl(regs + S3C64XX_SPI_RX_DATA);
209 else
210 break;
211 } while (loops--);
212
213 if (loops == 0)
214 dev_warn(&sdd->pdev->dev, "Timed out flushing RX FIFO\n");
215
216 val = readl(regs + S3C64XX_SPI_CH_CFG);
217 val &= ~S3C64XX_SPI_CH_SW_RST;
218 writel(val, regs + S3C64XX_SPI_CH_CFG);
219
220 val = readl(regs + S3C64XX_SPI_MODE_CFG);
221 val &= ~(S3C64XX_SPI_MODE_TXDMA_ON | S3C64XX_SPI_MODE_RXDMA_ON);
222 writel(val, regs + S3C64XX_SPI_MODE_CFG);
223
224 val = readl(regs + S3C64XX_SPI_CH_CFG);
225 val &= ~(S3C64XX_SPI_CH_RXCH_ON | S3C64XX_SPI_CH_TXCH_ON);
226 writel(val, regs + S3C64XX_SPI_CH_CFG);
227 }
228
229 static void enable_datapath(struct s3c64xx_spi_driver_data *sdd,
230 struct spi_device *spi,
231 struct spi_transfer *xfer, int dma_mode)
232 {
233 struct s3c64xx_spi_info *sci = sdd->cntrlr_info;
234 void __iomem *regs = sdd->regs;
235 u32 modecfg, chcfg;
236
237 modecfg = readl(regs + S3C64XX_SPI_MODE_CFG);
238 modecfg &= ~(S3C64XX_SPI_MODE_TXDMA_ON | S3C64XX_SPI_MODE_RXDMA_ON);
239
240 chcfg = readl(regs + S3C64XX_SPI_CH_CFG);
241 chcfg &= ~S3C64XX_SPI_CH_TXCH_ON;
242
243 if (dma_mode) {
244 chcfg &= ~S3C64XX_SPI_CH_RXCH_ON;
245 } else {
246 /* Always shift in data in FIFO, even if xfer is Tx only,
247 * this helps setting PCKT_CNT value for generating clocks
248 * as exactly needed.
249 */
250 chcfg |= S3C64XX_SPI_CH_RXCH_ON;
251 writel(((xfer->len * 8 / sdd->cur_bpw) & 0xffff)
252 | S3C64XX_SPI_PACKET_CNT_EN,
253 regs + S3C64XX_SPI_PACKET_CNT);
254 }
255
256 if (xfer->tx_buf != NULL) {
257 sdd->state |= TXBUSY;
258 chcfg |= S3C64XX_SPI_CH_TXCH_ON;
259 if (dma_mode) {
260 modecfg |= S3C64XX_SPI_MODE_TXDMA_ON;
261 s3c2410_dma_config(sdd->tx_dmach, sdd->cur_bpw / 8);
262 s3c2410_dma_enqueue(sdd->tx_dmach, (void *)sdd,
263 xfer->tx_dma, xfer->len);
264 s3c2410_dma_ctrl(sdd->tx_dmach, S3C2410_DMAOP_START);
265 } else {
266 switch (sdd->cur_bpw) {
267 case 32:
268 iowrite32_rep(regs + S3C64XX_SPI_TX_DATA,
269 xfer->tx_buf, xfer->len / 4);
270 break;
271 case 16:
272 iowrite16_rep(regs + S3C64XX_SPI_TX_DATA,
273 xfer->tx_buf, xfer->len / 2);
274 break;
275 default:
276 iowrite8_rep(regs + S3C64XX_SPI_TX_DATA,
277 xfer->tx_buf, xfer->len);
278 break;
279 }
280 }
281 }
282
283 if (xfer->rx_buf != NULL) {
284 sdd->state |= RXBUSY;
285
286 if (sci->high_speed && sdd->cur_speed >= 30000000UL
287 && !(sdd->cur_mode & SPI_CPHA))
288 chcfg |= S3C64XX_SPI_CH_HS_EN;
289
290 if (dma_mode) {
291 modecfg |= S3C64XX_SPI_MODE_RXDMA_ON;
292 chcfg |= S3C64XX_SPI_CH_RXCH_ON;
293 writel(((xfer->len * 8 / sdd->cur_bpw) & 0xffff)
294 | S3C64XX_SPI_PACKET_CNT_EN,
295 regs + S3C64XX_SPI_PACKET_CNT);
296 s3c2410_dma_config(sdd->rx_dmach, sdd->cur_bpw / 8);
297 s3c2410_dma_enqueue(sdd->rx_dmach, (void *)sdd,
298 xfer->rx_dma, xfer->len);
299 s3c2410_dma_ctrl(sdd->rx_dmach, S3C2410_DMAOP_START);
300 }
301 }
302
303 writel(modecfg, regs + S3C64XX_SPI_MODE_CFG);
304 writel(chcfg, regs + S3C64XX_SPI_CH_CFG);
305 }
306
307 static inline void enable_cs(struct s3c64xx_spi_driver_data *sdd,
308 struct spi_device *spi)
309 {
310 struct s3c64xx_spi_csinfo *cs;
311
312 if (sdd->tgl_spi != NULL) { /* If last device toggled after mssg */
313 if (sdd->tgl_spi != spi) { /* if last mssg on diff device */
314 /* Deselect the last toggled device */
315 cs = sdd->tgl_spi->controller_data;
316 cs->set_level(cs->line,
317 spi->mode & SPI_CS_HIGH ? 0 : 1);
318 }
319 sdd->tgl_spi = NULL;
320 }
321
322 cs = spi->controller_data;
323 cs->set_level(cs->line, spi->mode & SPI_CS_HIGH ? 1 : 0);
324 }
325
326 static int wait_for_xfer(struct s3c64xx_spi_driver_data *sdd,
327 struct spi_transfer *xfer, int dma_mode)
328 {
329 struct s3c64xx_spi_info *sci = sdd->cntrlr_info;
330 void __iomem *regs = sdd->regs;
331 unsigned long val;
332 int ms;
333
334 /* millisecs to xfer 'len' bytes @ 'cur_speed' */
335 ms = xfer->len * 8 * 1000 / sdd->cur_speed;
336 ms += 10; /* some tolerance */
337
338 if (dma_mode) {
339 val = msecs_to_jiffies(ms) + 10;
340 val = wait_for_completion_timeout(&sdd->xfer_completion, val);
341 } else {
342 u32 status;
343 val = msecs_to_loops(ms);
344 do {
345 status = readl(regs + S3C64XX_SPI_STATUS);
346 } while (RX_FIFO_LVL(status, sci) < xfer->len && --val);
347 }
348
349 if (!val)
350 return -EIO;
351
352 if (dma_mode) {
353 u32 status;
354
355 /*
356 * DmaTx returns after simply writing data in the FIFO,
357 * w/o waiting for real transmission on the bus to finish.
358 * DmaRx returns only after Dma read data from FIFO which
359 * needs bus transmission to finish, so we don't worry if
360 * Xfer involved Rx(with or without Tx).
361 */
362 if (xfer->rx_buf == NULL) {
363 val = msecs_to_loops(10);
364 status = readl(regs + S3C64XX_SPI_STATUS);
365 while ((TX_FIFO_LVL(status, sci)
366 || !S3C64XX_SPI_ST_TX_DONE(status, sci))
367 && --val) {
368 cpu_relax();
369 status = readl(regs + S3C64XX_SPI_STATUS);
370 }
371
372 if (!val)
373 return -EIO;
374 }
375 } else {
376 /* If it was only Tx */
377 if (xfer->rx_buf == NULL) {
378 sdd->state &= ~TXBUSY;
379 return 0;
380 }
381
382 switch (sdd->cur_bpw) {
383 case 32:
384 ioread32_rep(regs + S3C64XX_SPI_RX_DATA,
385 xfer->rx_buf, xfer->len / 4);
386 break;
387 case 16:
388 ioread16_rep(regs + S3C64XX_SPI_RX_DATA,
389 xfer->rx_buf, xfer->len / 2);
390 break;
391 default:
392 ioread8_rep(regs + S3C64XX_SPI_RX_DATA,
393 xfer->rx_buf, xfer->len);
394 break;
395 }
396 sdd->state &= ~RXBUSY;
397 }
398
399 return 0;
400 }
401
402 static inline void disable_cs(struct s3c64xx_spi_driver_data *sdd,
403 struct spi_device *spi)
404 {
405 struct s3c64xx_spi_csinfo *cs = spi->controller_data;
406
407 if (sdd->tgl_spi == spi)
408 sdd->tgl_spi = NULL;
409
410 cs->set_level(cs->line, spi->mode & SPI_CS_HIGH ? 0 : 1);
411 }
412
413 static void s3c64xx_spi_config(struct s3c64xx_spi_driver_data *sdd)
414 {
415 struct s3c64xx_spi_info *sci = sdd->cntrlr_info;
416 void __iomem *regs = sdd->regs;
417 u32 val;
418
419 /* Disable Clock */
420 if (sci->clk_from_cmu) {
421 clk_disable(sdd->src_clk);
422 } else {
423 val = readl(regs + S3C64XX_SPI_CLK_CFG);
424 val &= ~S3C64XX_SPI_ENCLK_ENABLE;
425 writel(val, regs + S3C64XX_SPI_CLK_CFG);
426 }
427
428 /* Set Polarity and Phase */
429 val = readl(regs + S3C64XX_SPI_CH_CFG);
430 val &= ~(S3C64XX_SPI_CH_SLAVE |
431 S3C64XX_SPI_CPOL_L |
432 S3C64XX_SPI_CPHA_B);
433
434 if (sdd->cur_mode & SPI_CPOL)
435 val |= S3C64XX_SPI_CPOL_L;
436
437 if (sdd->cur_mode & SPI_CPHA)
438 val |= S3C64XX_SPI_CPHA_B;
439
440 writel(val, regs + S3C64XX_SPI_CH_CFG);
441
442 /* Set Channel & DMA Mode */
443 val = readl(regs + S3C64XX_SPI_MODE_CFG);
444 val &= ~(S3C64XX_SPI_MODE_BUS_TSZ_MASK
445 | S3C64XX_SPI_MODE_CH_TSZ_MASK);
446
447 switch (sdd->cur_bpw) {
448 case 32:
449 val |= S3C64XX_SPI_MODE_BUS_TSZ_WORD;
450 val |= S3C64XX_SPI_MODE_CH_TSZ_WORD;
451 break;
452 case 16:
453 val |= S3C64XX_SPI_MODE_BUS_TSZ_HALFWORD;
454 val |= S3C64XX_SPI_MODE_CH_TSZ_HALFWORD;
455 break;
456 default:
457 val |= S3C64XX_SPI_MODE_BUS_TSZ_BYTE;
458 val |= S3C64XX_SPI_MODE_CH_TSZ_BYTE;
459 break;
460 }
461
462 writel(val, regs + S3C64XX_SPI_MODE_CFG);
463
464 if (sci->clk_from_cmu) {
465 /* Configure Clock */
466 /* There is half-multiplier before the SPI */
467 clk_set_rate(sdd->src_clk, sdd->cur_speed * 2);
468 /* Enable Clock */
469 clk_enable(sdd->src_clk);
470 } else {
471 /* Configure Clock */
472 val = readl(regs + S3C64XX_SPI_CLK_CFG);
473 val &= ~S3C64XX_SPI_PSR_MASK;
474 val |= ((clk_get_rate(sdd->src_clk) / sdd->cur_speed / 2 - 1)
475 & S3C64XX_SPI_PSR_MASK);
476 writel(val, regs + S3C64XX_SPI_CLK_CFG);
477
478 /* Enable Clock */
479 val = readl(regs + S3C64XX_SPI_CLK_CFG);
480 val |= S3C64XX_SPI_ENCLK_ENABLE;
481 writel(val, regs + S3C64XX_SPI_CLK_CFG);
482 }
483 }
484
485 static void s3c64xx_spi_dma_rxcb(struct s3c2410_dma_chan *chan, void *buf_id,
486 int size, enum s3c2410_dma_buffresult res)
487 {
488 struct s3c64xx_spi_driver_data *sdd = buf_id;
489 unsigned long flags;
490
491 spin_lock_irqsave(&sdd->lock, flags);
492
493 if (res == S3C2410_RES_OK)
494 sdd->state &= ~RXBUSY;
495 else
496 dev_err(&sdd->pdev->dev, "DmaAbrtRx-%d\n", size);
497
498 /* If the other done */
499 if (!(sdd->state & TXBUSY))
500 complete(&sdd->xfer_completion);
501
502 spin_unlock_irqrestore(&sdd->lock, flags);
503 }
504
505 static void s3c64xx_spi_dma_txcb(struct s3c2410_dma_chan *chan, void *buf_id,
506 int size, enum s3c2410_dma_buffresult res)
507 {
508 struct s3c64xx_spi_driver_data *sdd = buf_id;
509 unsigned long flags;
510
511 spin_lock_irqsave(&sdd->lock, flags);
512
513 if (res == S3C2410_RES_OK)
514 sdd->state &= ~TXBUSY;
515 else
516 dev_err(&sdd->pdev->dev, "DmaAbrtTx-%d \n", size);
517
518 /* If the other done */
519 if (!(sdd->state & RXBUSY))
520 complete(&sdd->xfer_completion);
521
522 spin_unlock_irqrestore(&sdd->lock, flags);
523 }
524
525 #define XFER_DMAADDR_INVALID DMA_BIT_MASK(32)
526
527 static int s3c64xx_spi_map_mssg(struct s3c64xx_spi_driver_data *sdd,
528 struct spi_message *msg)
529 {
530 struct s3c64xx_spi_info *sci = sdd->cntrlr_info;
531 struct device *dev = &sdd->pdev->dev;
532 struct spi_transfer *xfer;
533
534 if (msg->is_dma_mapped)
535 return 0;
536
537 /* First mark all xfer unmapped */
538 list_for_each_entry(xfer, &msg->transfers, transfer_list) {
539 xfer->rx_dma = XFER_DMAADDR_INVALID;
540 xfer->tx_dma = XFER_DMAADDR_INVALID;
541 }
542
543 /* Map until end or first fail */
544 list_for_each_entry(xfer, &msg->transfers, transfer_list) {
545
546 if (xfer->len <= ((sci->fifo_lvl_mask >> 1) + 1))
547 continue;
548
549 if (xfer->tx_buf != NULL) {
550 xfer->tx_dma = dma_map_single(dev,
551 (void *)xfer->tx_buf, xfer->len,
552 DMA_TO_DEVICE);
553 if (dma_mapping_error(dev, xfer->tx_dma)) {
554 dev_err(dev, "dma_map_single Tx failed\n");
555 xfer->tx_dma = XFER_DMAADDR_INVALID;
556 return -ENOMEM;
557 }
558 }
559
560 if (xfer->rx_buf != NULL) {
561 xfer->rx_dma = dma_map_single(dev, xfer->rx_buf,
562 xfer->len, DMA_FROM_DEVICE);
563 if (dma_mapping_error(dev, xfer->rx_dma)) {
564 dev_err(dev, "dma_map_single Rx failed\n");
565 dma_unmap_single(dev, xfer->tx_dma,
566 xfer->len, DMA_TO_DEVICE);
567 xfer->tx_dma = XFER_DMAADDR_INVALID;
568 xfer->rx_dma = XFER_DMAADDR_INVALID;
569 return -ENOMEM;
570 }
571 }
572 }
573
574 return 0;
575 }
576
577 static void s3c64xx_spi_unmap_mssg(struct s3c64xx_spi_driver_data *sdd,
578 struct spi_message *msg)
579 {
580 struct s3c64xx_spi_info *sci = sdd->cntrlr_info;
581 struct device *dev = &sdd->pdev->dev;
582 struct spi_transfer *xfer;
583
584 if (msg->is_dma_mapped)
585 return;
586
587 list_for_each_entry(xfer, &msg->transfers, transfer_list) {
588
589 if (xfer->len <= ((sci->fifo_lvl_mask >> 1) + 1))
590 continue;
591
592 if (xfer->rx_buf != NULL
593 && xfer->rx_dma != XFER_DMAADDR_INVALID)
594 dma_unmap_single(dev, xfer->rx_dma,
595 xfer->len, DMA_FROM_DEVICE);
596
597 if (xfer->tx_buf != NULL
598 && xfer->tx_dma != XFER_DMAADDR_INVALID)
599 dma_unmap_single(dev, xfer->tx_dma,
600 xfer->len, DMA_TO_DEVICE);
601 }
602 }
603
604 static void handle_msg(struct s3c64xx_spi_driver_data *sdd,
605 struct spi_message *msg)
606 {
607 struct s3c64xx_spi_info *sci = sdd->cntrlr_info;
608 struct spi_device *spi = msg->spi;
609 struct s3c64xx_spi_csinfo *cs = spi->controller_data;
610 struct spi_transfer *xfer;
611 int status = 0, cs_toggle = 0;
612 u32 speed;
613 u8 bpw;
614
615 /* If Master's(controller) state differs from that needed by Slave */
616 if (sdd->cur_speed != spi->max_speed_hz
617 || sdd->cur_mode != spi->mode
618 || sdd->cur_bpw != spi->bits_per_word) {
619 sdd->cur_bpw = spi->bits_per_word;
620 sdd->cur_speed = spi->max_speed_hz;
621 sdd->cur_mode = spi->mode;
622 s3c64xx_spi_config(sdd);
623 }
624
625 /* Map all the transfers if needed */
626 if (s3c64xx_spi_map_mssg(sdd, msg)) {
627 dev_err(&spi->dev,
628 "Xfer: Unable to map message buffers!\n");
629 status = -ENOMEM;
630 goto out;
631 }
632
633 /* Configure feedback delay */
634 writel(cs->fb_delay & 0x3, sdd->regs + S3C64XX_SPI_FB_CLK);
635
636 list_for_each_entry(xfer, &msg->transfers, transfer_list) {
637
638 unsigned long flags;
639 int use_dma;
640
641 INIT_COMPLETION(sdd->xfer_completion);
642
643 /* Only BPW and Speed may change across transfers */
644 bpw = xfer->bits_per_word ? : spi->bits_per_word;
645 speed = xfer->speed_hz ? : spi->max_speed_hz;
646
647 if (xfer->len % (bpw / 8)) {
648 dev_err(&spi->dev,
649 "Xfer length(%u) not a multiple of word size(%u)\n",
650 xfer->len, bpw / 8);
651 status = -EIO;
652 goto out;
653 }
654
655 if (bpw != sdd->cur_bpw || speed != sdd->cur_speed) {
656 sdd->cur_bpw = bpw;
657 sdd->cur_speed = speed;
658 s3c64xx_spi_config(sdd);
659 }
660
661 /* Polling method for xfers not bigger than FIFO capacity */
662 if (xfer->len <= ((sci->fifo_lvl_mask >> 1) + 1))
663 use_dma = 0;
664 else
665 use_dma = 1;
666
667 spin_lock_irqsave(&sdd->lock, flags);
668
669 /* Pending only which is to be done */
670 sdd->state &= ~RXBUSY;
671 sdd->state &= ~TXBUSY;
672
673 enable_datapath(sdd, spi, xfer, use_dma);
674
675 /* Slave Select */
676 enable_cs(sdd, spi);
677
678 /* Start the signals */
679 S3C64XX_SPI_ACT(sdd);
680
681 spin_unlock_irqrestore(&sdd->lock, flags);
682
683 status = wait_for_xfer(sdd, xfer, use_dma);
684
685 /* Quiese the signals */
686 S3C64XX_SPI_DEACT(sdd);
687
688 if (status) {
689 dev_err(&spi->dev, "I/O Error: "
690 "rx-%d tx-%d res:rx-%c tx-%c len-%d\n",
691 xfer->rx_buf ? 1 : 0, xfer->tx_buf ? 1 : 0,
692 (sdd->state & RXBUSY) ? 'f' : 'p',
693 (sdd->state & TXBUSY) ? 'f' : 'p',
694 xfer->len);
695
696 if (use_dma) {
697 if (xfer->tx_buf != NULL
698 && (sdd->state & TXBUSY))
699 s3c2410_dma_ctrl(sdd->tx_dmach,
700 S3C2410_DMAOP_FLUSH);
701 if (xfer->rx_buf != NULL
702 && (sdd->state & RXBUSY))
703 s3c2410_dma_ctrl(sdd->rx_dmach,
704 S3C2410_DMAOP_FLUSH);
705 }
706
707 goto out;
708 }
709
710 if (xfer->delay_usecs)
711 udelay(xfer->delay_usecs);
712
713 if (xfer->cs_change) {
714 /* Hint that the next mssg is gonna be
715 for the same device */
716 if (list_is_last(&xfer->transfer_list,
717 &msg->transfers))
718 cs_toggle = 1;
719 else
720 disable_cs(sdd, spi);
721 }
722
723 msg->actual_length += xfer->len;
724
725 flush_fifo(sdd);
726 }
727
728 out:
729 if (!cs_toggle || status)
730 disable_cs(sdd, spi);
731 else
732 sdd->tgl_spi = spi;
733
734 s3c64xx_spi_unmap_mssg(sdd, msg);
735
736 msg->status = status;
737
738 if (msg->complete)
739 msg->complete(msg->context);
740 }
741
742 static int acquire_dma(struct s3c64xx_spi_driver_data *sdd)
743 {
744 if (s3c2410_dma_request(sdd->rx_dmach,
745 &s3c64xx_spi_dma_client, NULL) < 0) {
746 dev_err(&sdd->pdev->dev, "cannot get RxDMA\n");
747 return 0;
748 }
749 s3c2410_dma_set_buffdone_fn(sdd->rx_dmach, s3c64xx_spi_dma_rxcb);
750 s3c2410_dma_devconfig(sdd->rx_dmach, S3C2410_DMASRC_HW,
751 sdd->sfr_start + S3C64XX_SPI_RX_DATA);
752
753 if (s3c2410_dma_request(sdd->tx_dmach,
754 &s3c64xx_spi_dma_client, NULL) < 0) {
755 dev_err(&sdd->pdev->dev, "cannot get TxDMA\n");
756 s3c2410_dma_free(sdd->rx_dmach, &s3c64xx_spi_dma_client);
757 return 0;
758 }
759 s3c2410_dma_set_buffdone_fn(sdd->tx_dmach, s3c64xx_spi_dma_txcb);
760 s3c2410_dma_devconfig(sdd->tx_dmach, S3C2410_DMASRC_MEM,
761 sdd->sfr_start + S3C64XX_SPI_TX_DATA);
762
763 return 1;
764 }
765
766 static void s3c64xx_spi_work(struct work_struct *work)
767 {
768 struct s3c64xx_spi_driver_data *sdd = container_of(work,
769 struct s3c64xx_spi_driver_data, work);
770 unsigned long flags;
771
772 /* Acquire DMA channels */
773 while (!acquire_dma(sdd))
774 msleep(10);
775
776 spin_lock_irqsave(&sdd->lock, flags);
777
778 while (!list_empty(&sdd->queue)
779 && !(sdd->state & SUSPND)) {
780
781 struct spi_message *msg;
782
783 msg = container_of(sdd->queue.next, struct spi_message, queue);
784
785 list_del_init(&msg->queue);
786
787 /* Set Xfer busy flag */
788 sdd->state |= SPIBUSY;
789
790 spin_unlock_irqrestore(&sdd->lock, flags);
791
792 handle_msg(sdd, msg);
793
794 spin_lock_irqsave(&sdd->lock, flags);
795
796 sdd->state &= ~SPIBUSY;
797 }
798
799 spin_unlock_irqrestore(&sdd->lock, flags);
800
801 /* Free DMA channels */
802 s3c2410_dma_free(sdd->tx_dmach, &s3c64xx_spi_dma_client);
803 s3c2410_dma_free(sdd->rx_dmach, &s3c64xx_spi_dma_client);
804 }
805
806 static int s3c64xx_spi_transfer(struct spi_device *spi,
807 struct spi_message *msg)
808 {
809 struct s3c64xx_spi_driver_data *sdd;
810 unsigned long flags;
811
812 sdd = spi_master_get_devdata(spi->master);
813
814 spin_lock_irqsave(&sdd->lock, flags);
815
816 if (sdd->state & SUSPND) {
817 spin_unlock_irqrestore(&sdd->lock, flags);
818 return -ESHUTDOWN;
819 }
820
821 msg->status = -EINPROGRESS;
822 msg->actual_length = 0;
823
824 list_add_tail(&msg->queue, &sdd->queue);
825
826 queue_work(sdd->workqueue, &sdd->work);
827
828 spin_unlock_irqrestore(&sdd->lock, flags);
829
830 return 0;
831 }
832
833 /*
834 * Here we only check the validity of requested configuration
835 * and save the configuration in a local data-structure.
836 * The controller is actually configured only just before we
837 * get a message to transfer.
838 */
839 static int s3c64xx_spi_setup(struct spi_device *spi)
840 {
841 struct s3c64xx_spi_csinfo *cs = spi->controller_data;
842 struct s3c64xx_spi_driver_data *sdd;
843 struct s3c64xx_spi_info *sci;
844 struct spi_message *msg;
845 unsigned long flags;
846 int err = 0;
847
848 if (cs == NULL || cs->set_level == NULL) {
849 dev_err(&spi->dev, "No CS for SPI(%d)\n", spi->chip_select);
850 return -ENODEV;
851 }
852
853 sdd = spi_master_get_devdata(spi->master);
854 sci = sdd->cntrlr_info;
855
856 spin_lock_irqsave(&sdd->lock, flags);
857
858 list_for_each_entry(msg, &sdd->queue, queue) {
859 /* Is some mssg is already queued for this device */
860 if (msg->spi == spi) {
861 dev_err(&spi->dev,
862 "setup: attempt while mssg in queue!\n");
863 spin_unlock_irqrestore(&sdd->lock, flags);
864 return -EBUSY;
865 }
866 }
867
868 if (sdd->state & SUSPND) {
869 spin_unlock_irqrestore(&sdd->lock, flags);
870 dev_err(&spi->dev,
871 "setup: SPI-%d not active!\n", spi->master->bus_num);
872 return -ESHUTDOWN;
873 }
874
875 spin_unlock_irqrestore(&sdd->lock, flags);
876
877 if (spi->bits_per_word != 8
878 && spi->bits_per_word != 16
879 && spi->bits_per_word != 32) {
880 dev_err(&spi->dev, "setup: %dbits/wrd not supported!\n",
881 spi->bits_per_word);
882 err = -EINVAL;
883 goto setup_exit;
884 }
885
886 /* Check if we can provide the requested rate */
887 if (!sci->clk_from_cmu) {
888 u32 psr, speed;
889
890 /* Max possible */
891 speed = clk_get_rate(sdd->src_clk) / 2 / (0 + 1);
892
893 if (spi->max_speed_hz > speed)
894 spi->max_speed_hz = speed;
895
896 psr = clk_get_rate(sdd->src_clk) / 2 / spi->max_speed_hz - 1;
897 psr &= S3C64XX_SPI_PSR_MASK;
898 if (psr == S3C64XX_SPI_PSR_MASK)
899 psr--;
900
901 speed = clk_get_rate(sdd->src_clk) / 2 / (psr + 1);
902 if (spi->max_speed_hz < speed) {
903 if (psr+1 < S3C64XX_SPI_PSR_MASK) {
904 psr++;
905 } else {
906 err = -EINVAL;
907 goto setup_exit;
908 }
909 }
910
911 speed = clk_get_rate(sdd->src_clk) / 2 / (psr + 1);
912 if (spi->max_speed_hz >= speed)
913 spi->max_speed_hz = speed;
914 else
915 err = -EINVAL;
916 }
917
918 setup_exit:
919
920 /* setup() returns with device de-selected */
921 disable_cs(sdd, spi);
922
923 return err;
924 }
925
926 static void s3c64xx_spi_hwinit(struct s3c64xx_spi_driver_data *sdd, int channel)
927 {
928 struct s3c64xx_spi_info *sci = sdd->cntrlr_info;
929 void __iomem *regs = sdd->regs;
930 unsigned int val;
931
932 sdd->cur_speed = 0;
933
934 S3C64XX_SPI_DEACT(sdd);
935
936 /* Disable Interrupts - we use Polling if not DMA mode */
937 writel(0, regs + S3C64XX_SPI_INT_EN);
938
939 if (!sci->clk_from_cmu)
940 writel(sci->src_clk_nr << S3C64XX_SPI_CLKSEL_SRCSHFT,
941 regs + S3C64XX_SPI_CLK_CFG);
942 writel(0, regs + S3C64XX_SPI_MODE_CFG);
943 writel(0, regs + S3C64XX_SPI_PACKET_CNT);
944
945 /* Clear any irq pending bits */
946 writel(readl(regs + S3C64XX_SPI_PENDING_CLR),
947 regs + S3C64XX_SPI_PENDING_CLR);
948
949 writel(0, regs + S3C64XX_SPI_SWAP_CFG);
950
951 val = readl(regs + S3C64XX_SPI_MODE_CFG);
952 val &= ~S3C64XX_SPI_MODE_4BURST;
953 val &= ~(S3C64XX_SPI_MAX_TRAILCNT << S3C64XX_SPI_TRAILCNT_OFF);
954 val |= (S3C64XX_SPI_TRAILCNT << S3C64XX_SPI_TRAILCNT_OFF);
955 writel(val, regs + S3C64XX_SPI_MODE_CFG);
956
957 flush_fifo(sdd);
958 }
959
960 static int __init s3c64xx_spi_probe(struct platform_device *pdev)
961 {
962 struct resource *mem_res, *dmatx_res, *dmarx_res;
963 struct s3c64xx_spi_driver_data *sdd;
964 struct s3c64xx_spi_info *sci;
965 struct spi_master *master;
966 int ret;
967
968 if (pdev->id < 0) {
969 dev_err(&pdev->dev,
970 "Invalid platform device id-%d\n", pdev->id);
971 return -ENODEV;
972 }
973
974 if (pdev->dev.platform_data == NULL) {
975 dev_err(&pdev->dev, "platform_data missing!\n");
976 return -ENODEV;
977 }
978
979 sci = pdev->dev.platform_data;
980 if (!sci->src_clk_name) {
981 dev_err(&pdev->dev,
982 "Board init must call s3c64xx_spi_set_info()\n");
983 return -EINVAL;
984 }
985
986 /* Check for availability of necessary resource */
987
988 dmatx_res = platform_get_resource(pdev, IORESOURCE_DMA, 0);
989 if (dmatx_res == NULL) {
990 dev_err(&pdev->dev, "Unable to get SPI-Tx dma resource\n");
991 return -ENXIO;
992 }
993
994 dmarx_res = platform_get_resource(pdev, IORESOURCE_DMA, 1);
995 if (dmarx_res == NULL) {
996 dev_err(&pdev->dev, "Unable to get SPI-Rx dma resource\n");
997 return -ENXIO;
998 }
999
1000 mem_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
1001 if (mem_res == NULL) {
1002 dev_err(&pdev->dev, "Unable to get SPI MEM resource\n");
1003 return -ENXIO;
1004 }
1005
1006 master = spi_alloc_master(&pdev->dev,
1007 sizeof(struct s3c64xx_spi_driver_data));
1008 if (master == NULL) {
1009 dev_err(&pdev->dev, "Unable to allocate SPI Master\n");
1010 return -ENOMEM;
1011 }
1012
1013 platform_set_drvdata(pdev, master);
1014
1015 sdd = spi_master_get_devdata(master);
1016 sdd->master = master;
1017 sdd->cntrlr_info = sci;
1018 sdd->pdev = pdev;
1019 sdd->sfr_start = mem_res->start;
1020 sdd->tx_dmach = dmatx_res->start;
1021 sdd->rx_dmach = dmarx_res->start;
1022
1023 sdd->cur_bpw = 8;
1024
1025 master->bus_num = pdev->id;
1026 master->setup = s3c64xx_spi_setup;
1027 master->transfer = s3c64xx_spi_transfer;
1028 master->num_chipselect = sci->num_cs;
1029 master->dma_alignment = 8;
1030 /* the spi->mode bits understood by this driver: */
1031 master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH;
1032
1033 if (request_mem_region(mem_res->start,
1034 resource_size(mem_res), pdev->name) == NULL) {
1035 dev_err(&pdev->dev, "Req mem region failed\n");
1036 ret = -ENXIO;
1037 goto err0;
1038 }
1039
1040 sdd->regs = ioremap(mem_res->start, resource_size(mem_res));
1041 if (sdd->regs == NULL) {
1042 dev_err(&pdev->dev, "Unable to remap IO\n");
1043 ret = -ENXIO;
1044 goto err1;
1045 }
1046
1047 if (sci->cfg_gpio == NULL || sci->cfg_gpio(pdev)) {
1048 dev_err(&pdev->dev, "Unable to config gpio\n");
1049 ret = -EBUSY;
1050 goto err2;
1051 }
1052
1053 /* Setup clocks */
1054 sdd->clk = clk_get(&pdev->dev, "spi");
1055 if (IS_ERR(sdd->clk)) {
1056 dev_err(&pdev->dev, "Unable to acquire clock 'spi'\n");
1057 ret = PTR_ERR(sdd->clk);
1058 goto err3;
1059 }
1060
1061 if (clk_enable(sdd->clk)) {
1062 dev_err(&pdev->dev, "Couldn't enable clock 'spi'\n");
1063 ret = -EBUSY;
1064 goto err4;
1065 }
1066
1067 sdd->src_clk = clk_get(&pdev->dev, sci->src_clk_name);
1068 if (IS_ERR(sdd->src_clk)) {
1069 dev_err(&pdev->dev,
1070 "Unable to acquire clock '%s'\n", sci->src_clk_name);
1071 ret = PTR_ERR(sdd->src_clk);
1072 goto err5;
1073 }
1074
1075 if (clk_enable(sdd->src_clk)) {
1076 dev_err(&pdev->dev, "Couldn't enable clock '%s'\n",
1077 sci->src_clk_name);
1078 ret = -EBUSY;
1079 goto err6;
1080 }
1081
1082 sdd->workqueue = create_singlethread_workqueue(
1083 dev_name(master->dev.parent));
1084 if (sdd->workqueue == NULL) {
1085 dev_err(&pdev->dev, "Unable to create workqueue\n");
1086 ret = -ENOMEM;
1087 goto err7;
1088 }
1089
1090 /* Setup Deufult Mode */
1091 s3c64xx_spi_hwinit(sdd, pdev->id);
1092
1093 spin_lock_init(&sdd->lock);
1094 init_completion(&sdd->xfer_completion);
1095 INIT_WORK(&sdd->work, s3c64xx_spi_work);
1096 INIT_LIST_HEAD(&sdd->queue);
1097
1098 if (spi_register_master(master)) {
1099 dev_err(&pdev->dev, "cannot register SPI master\n");
1100 ret = -EBUSY;
1101 goto err8;
1102 }
1103
1104 dev_dbg(&pdev->dev, "Samsung SoC SPI Driver loaded for Bus SPI-%d "
1105 "with %d Slaves attached\n",
1106 pdev->id, master->num_chipselect);
1107 dev_dbg(&pdev->dev, "\tIOmem=[0x%x-0x%x]\tDMA=[Rx-%d, Tx-%d]\n",
1108 mem_res->end, mem_res->start,
1109 sdd->rx_dmach, sdd->tx_dmach);
1110
1111 return 0;
1112
1113 err8:
1114 destroy_workqueue(sdd->workqueue);
1115 err7:
1116 clk_disable(sdd->src_clk);
1117 err6:
1118 clk_put(sdd->src_clk);
1119 err5:
1120 clk_disable(sdd->clk);
1121 err4:
1122 clk_put(sdd->clk);
1123 err3:
1124 err2:
1125 iounmap((void *) sdd->regs);
1126 err1:
1127 release_mem_region(mem_res->start, resource_size(mem_res));
1128 err0:
1129 platform_set_drvdata(pdev, NULL);
1130 spi_master_put(master);
1131
1132 return ret;
1133 }
1134
1135 static int s3c64xx_spi_remove(struct platform_device *pdev)
1136 {
1137 struct spi_master *master = spi_master_get(platform_get_drvdata(pdev));
1138 struct s3c64xx_spi_driver_data *sdd = spi_master_get_devdata(master);
1139 struct resource *mem_res;
1140 unsigned long flags;
1141
1142 spin_lock_irqsave(&sdd->lock, flags);
1143 sdd->state |= SUSPND;
1144 spin_unlock_irqrestore(&sdd->lock, flags);
1145
1146 while (sdd->state & SPIBUSY)
1147 msleep(10);
1148
1149 spi_unregister_master(master);
1150
1151 destroy_workqueue(sdd->workqueue);
1152
1153 clk_disable(sdd->src_clk);
1154 clk_put(sdd->src_clk);
1155
1156 clk_disable(sdd->clk);
1157 clk_put(sdd->clk);
1158
1159 iounmap((void *) sdd->regs);
1160
1161 mem_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
1162 if (mem_res != NULL)
1163 release_mem_region(mem_res->start, resource_size(mem_res));
1164
1165 platform_set_drvdata(pdev, NULL);
1166 spi_master_put(master);
1167
1168 return 0;
1169 }
1170
1171 #ifdef CONFIG_PM
1172 static int s3c64xx_spi_suspend(struct platform_device *pdev, pm_message_t state)
1173 {
1174 struct spi_master *master = spi_master_get(platform_get_drvdata(pdev));
1175 struct s3c64xx_spi_driver_data *sdd = spi_master_get_devdata(master);
1176 unsigned long flags;
1177
1178 spin_lock_irqsave(&sdd->lock, flags);
1179 sdd->state |= SUSPND;
1180 spin_unlock_irqrestore(&sdd->lock, flags);
1181
1182 while (sdd->state & SPIBUSY)
1183 msleep(10);
1184
1185 /* Disable the clock */
1186 clk_disable(sdd->src_clk);
1187 clk_disable(sdd->clk);
1188
1189 sdd->cur_speed = 0; /* Output Clock is stopped */
1190
1191 return 0;
1192 }
1193
1194 static int s3c64xx_spi_resume(struct platform_device *pdev)
1195 {
1196 struct spi_master *master = spi_master_get(platform_get_drvdata(pdev));
1197 struct s3c64xx_spi_driver_data *sdd = spi_master_get_devdata(master);
1198 struct s3c64xx_spi_info *sci = sdd->cntrlr_info;
1199 unsigned long flags;
1200
1201 sci->cfg_gpio(pdev);
1202
1203 /* Enable the clock */
1204 clk_enable(sdd->src_clk);
1205 clk_enable(sdd->clk);
1206
1207 s3c64xx_spi_hwinit(sdd, pdev->id);
1208
1209 spin_lock_irqsave(&sdd->lock, flags);
1210 sdd->state &= ~SUSPND;
1211 spin_unlock_irqrestore(&sdd->lock, flags);
1212
1213 return 0;
1214 }
1215 #else
1216 #define s3c64xx_spi_suspend NULL
1217 #define s3c64xx_spi_resume NULL
1218 #endif /* CONFIG_PM */
1219
1220 static struct platform_driver s3c64xx_spi_driver = {
1221 .driver = {
1222 .name = "s3c64xx-spi",
1223 .owner = THIS_MODULE,
1224 },
1225 .remove = s3c64xx_spi_remove,
1226 .suspend = s3c64xx_spi_suspend,
1227 .resume = s3c64xx_spi_resume,
1228 };
1229 MODULE_ALIAS("platform:s3c64xx-spi");
1230
1231 static int __init s3c64xx_spi_init(void)
1232 {
1233 return platform_driver_probe(&s3c64xx_spi_driver, s3c64xx_spi_probe);
1234 }
1235 subsys_initcall(s3c64xx_spi_init);
1236
1237 static void __exit s3c64xx_spi_exit(void)
1238 {
1239 platform_driver_unregister(&s3c64xx_spi_driver);
1240 }
1241 module_exit(s3c64xx_spi_exit);
1242
1243 MODULE_AUTHOR("Jaswinder Singh <jassi.brar@samsung.com>");
1244 MODULE_DESCRIPTION("S3C64XX SPI Controller Driver");
1245 MODULE_LICENSE("GPL");
Linux kernel - Deliverables
This page took 0.062813 seconds and 5 git commands to generate.