2 tristate "Data acquisition support (comedi)"
6 Enable support a wide range of data acquisition devices
10 bool "Comedi debugging"
11 depends on COMEDI != n
13 This is an option for use by developers; most people should
14 say N here. This enables comedi core and driver debugging.
16 menuconfig COMEDI_MISC_DRIVERS
17 tristate "Comedi misc drivers"
21 Enable comedi misc drivers to be built
23 Note that the answer to this question won't directly affect the
24 kernel: saying N will just cause the configurator to skip all
25 the questions about misc non-hardware comedi drivers.
27 if COMEDI_MISC_DRIVERS
29 config COMEDI_KCOMEDILIB
30 tristate "Comedi kcomedilib"
35 tristate "Device bonding support"
36 depends on COMEDI_KCOMEDILIB
39 Enable support for a driver to 'bond' (merge) multiple subdevices
40 from multiple devices together as one.
42 To compile this driver as a module, choose M here: the module will be
46 tristate "Fake waveform generator support"
50 Enable support for the fake waveform generator.
51 This driver is mainly for testing purposes, but can also be used to
52 generate sample waveforms on systems that don't have data acquisition
55 To compile this driver as a module, choose M here: the module will be
59 tristate "Parallel port support"
62 Enable support for the standard parallel port.
63 A cheap and easy way to get a few more digital I/O lines. Steal
64 additional parallel ports from old computers or your neighbors'
67 To compile this driver as a module, choose M here: the module will be
68 called comedi_parport.
70 config COMEDI_SERIAL2002
71 tristate "Driver for serial connected hardware"
74 Enable support for serial connected hardware
76 To compile this driver as a module, choose M here: the module will be
80 tristate "Comedi skeleton driver"
83 Build the Skeleton driver, an example for driver writers
85 To compile this driver as a module, choose M here: the module will be
88 endif # COMEDI_MISC_DRIVERS
90 menuconfig COMEDI_ISA_DRIVERS
91 tristate "Comedi ISA and PC/104 drivers"
92 depends on COMEDI && ISA
95 Enable comedi ISA and PC/104 drivers to be built
97 Note that the answer to this question won't directly affect the
98 kernel: saying N will just cause the configurator to skip all
99 the questions about ISA and PC/104 comedi drivers.
101 if COMEDI_ISA_DRIVERS && ISA
103 config COMEDI_ACL7225B
104 tristate "ADlink NuDAQ ACL-7225b and compatibles support"
107 Enable support for ADlink NuDAQ ACL-7225b and compatibles,
108 ADlink ACL-7225b (acl7225b), ICP P16R16DIO (p16r16dio)
110 To compile this driver as a module, choose M here: the module will be
114 tristate "Advantech PCL-711/711b and ADlink ACL-8112 ISA card support"
117 Enable support for Advantech PCL-711 and 711b, ADlink ACL-8112
119 To compile this driver as a module, choose M here: the module will be
123 tristate "Advantech PCL-722/724/731 and ADlink ACL-7122/7124/PET-48DIO"
127 Enable support for Advantech PCL-724, PCL-722, PCL-731 and
128 ADlink ACL-7122, ACL-7124, PET-48DIO ISA cards
130 To compile this driver as a module, choose M here: the module will be
134 tristate "Advantech PCL-725 and compatible ISA card support"
137 Enable support for Advantech PCL-725 and compatible ISA cards.
139 To compile this driver as a module, choose M here: the module will be
143 tristate "Advantech PCL-726 and compatible ISA card support"
146 Enable support for Advantech PCL-726 and compatible ISA cards.
148 To compile this driver as a module, choose M here: the module will be
152 tristate "Advantech PCL-730 and ADlink ACL-7130 ISA card support"
155 Enable support for Advantech PCL-730, ICP ISO-730 and ADlink
158 To compile this driver as a module, choose M here: the module will be
162 tristate "Advantech PCL-812/813 and ADlink ACL-8112/8113/8113/8216"
165 Enable support for Advantech PCL-812/PG, PCL-813/B, ADLink
166 ACL-8112DG/HG/PG, ACL-8113, ACL-8216, ICP DAS A-821PGH/PGL/PGL-NDA,
167 A-822PGH/PGL, A-823PGH/PGL, A-826PG and ICP DAS ISO-813 ISA cards
169 To compile this driver as a module, choose M here: the module will be
173 tristate "Advantech PCL-814 and PCL-816 ISA card support"
176 Enable support for Advantech PCL-814 and PCL-816 ISA cards
178 To compile this driver as a module, choose M here: the module will be
182 tristate "Advantech PCL-718 and PCL-818 ISA card support"
185 Enable support for Advantech PCL-818 ISA cards
186 PCL-818L, PCL-818H, PCL-818HD, PCL-818HG, PCL-818 and PCL-718
188 To compile this driver as a module, choose M here: the module will be
191 config COMEDI_PCM3724
192 tristate "Advantech PCM-3724 PC/104 card support"
196 Enable support for Advantech PCM-3724 PC/104 cards.
198 To compile this driver as a module, choose M here: the module will be
201 config COMEDI_PCM3730
202 tristate "Advantech PCM-3730 and clone PC/104 board support"
205 Enable support for Advantech PCM-3730 and clone PC/104 boards
207 To compile this driver as a module, choose M here: the module will be
211 tristate "Analog Devices RTI-800/815 ISA card support"
214 Enable support for Analog Devices RTI-800/815 ISA cards
216 To compile this driver as a module, choose M here: the module will be
220 tristate "Analog Devices RTI-802 ISA card support"
223 Enable support for Analog Devices RTI-802 ISA cards
225 To compile this driver as a module, choose M here: the module will be
228 config COMEDI_DAS16M1
229 tristate "MeasurementComputing CIO-DAS16/M1DAS-16 ISA card support"
234 Enable support for Measurement Computing CIO-DAS16/M1 ISA cards.
236 To compile this driver as a module, choose M here: the module will be
240 tristate "DAS-16 compatible ISA and PC/104 card support"
245 Enable support for Keithley Metrabyte/ComputerBoards DAS16
246 and compatible ISA and PC/104 cards:
247 Keithley Metrabyte DAS-16, DAS-16G, DAS-16F, DAS-1201, DAS-1202,
248 DAS-1401, DAS-1402, DAS-1601, DAS-1602 and
249 ComputerBoards/MeasurementComputing PC104-DAS16/JR/,
250 PC104-DAS16JR/16, CIO-DAS16JR/16, CIO-DAS16/JR, CIO-DAS1401/12,
251 CIO-DAS1402/12, CIO-DAS1402/16, CIO-DAS1601/12, CIO-DAS1602/12,
252 CIO-DAS1602/16, CIO-DAS16/330
254 To compile this driver as a module, choose M here: the module will be
258 tristate "DAS800 and compatible ISA card support"
262 Enable support for Keithley Metrabyte DAS800 and compatible ISA cards
263 Keithley Metrabyte DAS-800, DAS-801, DAS-802
264 Measurement Computing CIO-DAS800, CIO-DAS801, CIO-DAS802 and
267 To compile this driver as a module, choose M here: the module will be
270 config COMEDI_DAS1800
271 tristate "DAS1800 and compatible ISA card support"
275 Enable support for DAS1800 and compatible ISA cards
276 Keithley Metrabyte DAS-1701ST, DAS-1701ST-DA, DAS-1701/AO,
277 DAS-1702ST, DAS-1702ST-DA, DAS-1702HR, DAS-1702HR-DA, DAS-1702/AO,
278 DAS-1801ST, DAS-1801ST-DA, DAS-1801HC, DAS-1801AO, DAS-1802ST,
279 DAS-1802ST-DA, DAS-1802HR, DAS-1802HR-DA, DAS-1802HC and
282 To compile this driver as a module, choose M here: the module will be
285 config COMEDI_DAS6402
286 tristate "DAS6402 and compatible ISA card support"
289 Enable support for DAS6402 and compatible ISA cards
290 Computerboards, Keithley Metrabyte DAS6402 and compatibles
292 To compile this driver as a module, choose M here: the module will be
296 tristate "Data Translation DT2801 ISA card support"
299 Enable support for Data Translation DT2801 ISA cards
301 To compile this driver as a module, choose M here: the module will be
305 tristate "Data Translation DT2811 ISA card support"
308 Enable support for Data Translation DT2811 ISA cards
310 To compile this driver as a module, choose M here: the module will be
314 tristate "Data Translation DT2814 ISA card support"
317 Enable support for Data Translation DT2814 ISA cards
319 To compile this driver as a module, choose M here: the module will be
323 tristate "Data Translation DT2815 ISA card support"
326 Enable support for Data Translation DT2815 ISA cards
328 To compile this driver as a module, choose M here: the module will be
332 tristate "Data Translation DT2817 ISA card support"
335 Enable support for Data Translation DT2817 ISA cards
337 To compile this driver as a module, choose M here: the module will be
341 tristate "Data Translation DT2821 series and DT-EZ ISA card support"
345 Enable support for Data Translation DT2821 series including DT-EZ
346 DT2821, DT2821-F-16SE, DT2821-F-8DI, DT2821-G-16SE, DT2821-G-8DI,
347 DT2823 (dt2823), DT2824-PGH, DT2824-PGL, DT2825, DT2827, DT2828,
348 DT21-EZ, DT23-EZ, DT24-EZ and DT24-EZ-PGL
350 To compile this driver as a module, choose M here: the module will be
353 config COMEDI_DMM32AT
354 tristate "Diamond Systems MM-32-AT PC/104 board support"
357 Enable support for Diamond Systems MM-32-AT PC/104 boards
359 To compile this driver as a module, choose M here: the module will be
363 tristate "FL512 ISA card support"
366 Enable support for FL512 ISA card
368 To compile this driver as a module, choose M here: the module will be
371 config COMEDI_AIO_AIO12_8
372 tristate "I/O Products PC/104 AIO12-8 Analog I/O Board support"
376 Enable support for I/O Products PC/104 AIO12-8 Analog I/O Board
378 To compile this driver as a module, choose M here: the module will be
381 config COMEDI_AIO_IIRO_16
382 tristate "I/O Products PC/104 IIRO16 Board support"
385 Enable support for I/O Products PC/104 IIRO16 Relay And Isolated
388 To compile this driver as a module, choose M here: the module will be
391 config COMEDI_C6XDIGIO
392 tristate "Mechatronic Systems Inc. C6x_DIGIO DSP daughter card support"
395 Enable support for Mechatronic Systems Inc. C6x_DIGIO DSP daughter
398 To compile this driver as a module, choose M here: the module will be
402 tristate "Micro/sys MPC-624 PC/104 board support"
405 Enable support for Micro/sys MPC-624 PC/104 board
407 To compile this driver as a module, choose M here: the module will be
411 tristate "MicroAxial ADQ12-B data acquisition and control card support"
414 Enable MicroAxial ADQ12-B daq and control card support.
416 To compile this driver as a module, choose M here: the module will be
419 config COMEDI_NI_AT_A2150
420 tristate "NI AT-A2150 ISA card support"
421 depends on COMEDI_NI_COMMON
424 Enable support for National Instruments AT-A2150 cards
426 To compile this driver as a module, choose M here: the module will be
429 config COMEDI_NI_AT_AO
430 tristate "NI AT-AO-6/10 EISA card support"
431 depends on COMEDI_NI_COMMON
434 Enable support for National Instruments AT-AO-6/10 cards
436 To compile this driver as a module, choose M here: the module will be
439 config COMEDI_NI_ATMIO
440 tristate "NI AT-MIO E series ISA-PNP card support"
441 depends on ISAPNP && COMEDI_NI_TIO && COMEDI_NI_COMMON
445 Enable support for National Instruments AT-MIO E series cards
446 National Instruments AT-MIO-16E-1 (ni_atmio),
447 AT-MIO-16E-2, AT-MIO-16E-10, AT-MIO-16DE-10, AT-MIO-64E-3,
448 AT-MIO-16XE-50, AT-MIO-16XE-10, AT-AI-16XE-10
450 To compile this driver as a module, choose M here: the module will be
453 config COMEDI_NI_ATMIO16D
454 tristate "NI AT-MIO16/AT-MIO16D series ISA-PNP card support"
455 depends on ISAPNP && COMEDI_NI_COMMON
459 Enable support for National Instruments AT-MIO16/AT-MIO16D cards.
461 To compile this driver as a module, choose M here: the module will be
465 tristate "Winsystems PCM-A/D12 and PCM-A/D16 PC/104 board support"
468 Enable support for Winsystems PCM-A/D12 and PCM-A/D16 PC/104 boards.
470 To compile this driver as a module, choose M here: the module will be
473 config COMEDI_PCMDA12
474 tristate "Winsystems PCM-D/A-12 8-channel AO PC/104 board support"
477 Enable support for Winsystems PCM-D/A-12 8-channel AO PC/104 boards.
478 Note that the board is not ISA-PNP capable and thus needs the I/O
479 port comedi_config parameter.
481 To compile this driver as a module, choose M here: the module will be
485 tristate "Winsystems PCM-MIO PC/104 board support"
488 Enable support for Winsystems PCM-MIO multifunction PC/104 boards.
490 To compile this driver as a module, choose M here: the module will be
494 tristate "Winsystems PCM-UIO48A and PCM-UIO96A PC/104 board support"
497 Enable support for PCM-UIO48A and PCM-UIO96A PC/104 boards.
499 To compile this driver as a module, choose M here: the module will be
502 config COMEDI_MULTIQ3
503 tristate "Quanser Consulting MultiQ-3 ISA card support"
506 Enable support for Quanser Consulting MultiQ-3 ISA cards
508 To compile this driver as a module, choose M here: the module will be
512 tristate "Generic driver for very simple devices"
515 Enable generic support for very simple / POC (Piece of Crap) boards,
516 Keithley Metrabyte DAC-02 (dac02), Advantech PCL-733 (pcl733) and
519 To compile this driver as a module, choose M here: the module will be
522 endif # COMEDI_ISA_DRIVERS
524 menuconfig COMEDI_PCI_DRIVERS
525 tristate "Comedi PCI drivers"
526 depends on COMEDI && PCI
529 Enable comedi PCI drivers to be built
531 Note that the answer to this question won't directly affect the
532 kernel: saying N will just cause the configurator to skip all
533 the questions about PCI comedi drivers.
535 if COMEDI_PCI_DRIVERS && PCI
537 config COMEDI_ADDI_APCI_035
538 tristate "ADDI-DATA APCI_035 support"
541 Enable support for ADDI-DATA APCI_035 cards
543 To compile this driver as a module, choose M here: the module will be
544 called addi_apci_035.
546 config COMEDI_ADDI_APCI_1032
547 tristate "ADDI-DATA APCI_1032 support"
550 Enable support for ADDI-DATA APCI_1032 cards
552 To compile this driver as a module, choose M here: the module will be
553 called addi_apci_1032.
555 config COMEDI_ADDI_APCI_1500
556 tristate "ADDI-DATA APCI_1500 support"
559 Enable support for ADDI-DATA APCI_1500 cards
561 To compile this driver as a module, choose M here: the module will be
562 called addi_apci_1500.
564 config COMEDI_ADDI_APCI_1516
565 tristate "ADDI-DATA APCI_1516 support"
568 Enable support for ADDI-DATA APCI_1516 cards
570 To compile this driver as a module, choose M here: the module will be
571 called addi_apci_1516.
573 config COMEDI_ADDI_APCI_1564
574 tristate "ADDI-DATA APCI_1564 support"
577 Enable support for ADDI-DATA APCI_1564 cards
579 To compile this driver as a module, choose M here: the module will be
580 called addi_apci_1564.
582 config COMEDI_ADDI_APCI_16XX
583 tristate "ADDI-DATA APCI_16xx support"
586 Enable support for ADDI-DATA APCI_16xx cards
588 To compile this driver as a module, choose M here: the module will be
589 called addi_apci_16xx.
591 config COMEDI_ADDI_APCI_2016
592 tristate "ADDI-DATA APCI_2016 support"
595 Enable support for ADDI-DATA APCI_2016 cards
597 To compile this driver as a module, choose M here: the module will be
598 called addi_apci_2016.
600 config COMEDI_ADDI_APCI_2032
601 tristate "ADDI-DATA APCI_2032 support"
604 Enable support for ADDI-DATA APCI_2032 cards
606 To compile this driver as a module, choose M here: the module will be
607 called addi_apci_2032.
609 config COMEDI_ADDI_APCI_2200
610 tristate "ADDI-DATA APCI_2200 support"
613 Enable support for ADDI-DATA APCI_2200 cards
615 To compile this driver as a module, choose M here: the module will be
616 called addi_apci_2200.
618 config COMEDI_ADDI_APCI_3001
619 tristate "ADDI-DATA APCI_3001 support"
623 Enable support for ADDI-DATA APCI_3001 cards
625 To compile this driver as a module, choose M here: the module will be
626 called addi_apci_3001.
628 config COMEDI_ADDI_APCI_3120
629 tristate "ADDI-DATA APCI_3520 support"
633 Enable support for ADDI-DATA APCI_3520 cards
635 To compile this driver as a module, choose M here: the module will be
636 called addi_apci_3120.
638 config COMEDI_ADDI_APCI_3501
639 tristate "ADDI-DATA APCI_3501 support"
642 Enable support for ADDI-DATA APCI_3501 cards
644 To compile this driver as a module, choose M here: the module will be
645 called addi_apci_3501.
647 config COMEDI_ADDI_APCI_3XXX
648 tristate "ADDI-DATA APCI_3xxx support"
651 Enable support for ADDI-DATA APCI_3xxx cards
653 To compile this driver as a module, choose M here: the module will be
654 called addi_apci_3xxx.
656 config COMEDI_ADL_PCI6208
657 tristate "ADLink PCI-6208A support"
661 Enable support for ADLink PCI-6208A cards
663 To compile this driver as a module, choose M here: the module will be
666 config COMEDI_ADL_PCI7230
667 tristate "ADLink PCI-7230 digital io board support"
670 Enable support for ADlink PCI-7230 digital io board support
672 To compile this driver as a module, choose M here: the module will be
675 config COMEDI_ADL_PCI7296
676 tristate "ADLink PCI-7296 96 ch. digital io board support"
679 Enable support for ADlink PCI-7296 96 ch. digital io board support
681 To compile this driver as a module, choose M here: the module will be
684 config COMEDI_ADL_PCI7432
685 tristate "ADLink PCI-7432 64 ch. isolated digital io board support"
688 Enable support for ADlink PCI-7432 64 ch. isolated digital io board
690 To compile this driver as a module, choose M here: the module will be
693 config COMEDI_ADL_PCI8164
694 tristate "ADLink PCI-8164 4 Axes Motion Control board support"
697 Enable support for ADlink PCI-8164 4 Axes Motion Control board
699 To compile this driver as a module, choose M here: the module will be
702 config COMEDI_ADL_PCI9111
703 tristate "ADLink PCI-9111HR support"
707 Enable support for ADlink PCI9111 cards
709 To compile this driver as a module, choose M here: the module will be
712 config COMEDI_ADL_PCI9118
713 tristate "ADLink PCI-9118DG, PCI-9118HG, PCI-9118HR support"
717 Enable support for ADlink PCI-9118DG, PCI-9118HG, PCI-9118HR cards
719 To compile this driver as a module, choose M here: the module will be
722 config COMEDI_ADV_PCI1710
723 tristate "Advantech PCI-171x, PCI-1720 and PCI-1731 support"
726 Enable support for Advantech PCI-1710, PCI-1710HG, PCI-1711,
727 PCI-1713, PCI-1720 and PCI-1731
729 To compile this driver as a module, choose M here: the module will be
732 config COMEDI_ADV_PCI1723
733 tristate "Advantech PCI-1723 support"
736 Enable support for Advantech PCI-1723 cards
738 To compile this driver as a module, choose M here: the module will be
741 config COMEDI_ADV_PCI_DIO
742 tristate "Advantech PCI DIO card support"
746 Enable support for Advantech PCI DIO cards
747 PCI-1730, PCI-1733, PCI-1734, PCI-1736UP, PCI-1750, PCI-1751,
748 PCI-1752, PCI-1753/E, PCI-1754, PCI-1756 and PCI-1762
750 To compile this driver as a module, choose M here: the module will be
753 config COMEDI_AMPLC_DIO200
754 tristate "Amplicon PC272E and PCI272 DIO board support"
758 Enable support for Amplicon PC272E and PCI272 DIO boards
760 To compile this driver as a module, choose M here: the module will be
763 config COMEDI_AMPLC_PC236
764 tristate "Amplicon PC36AT and PCI236 DIO board support"
768 Enable support for Amplicon PC36AT and PCI236 DIO boards
770 To compile this driver as a module, choose M here: the module will be
773 config COMEDI_AMPLC_PC263
774 tristate "Amplicon PC263 and PCI263 relay board support"
777 Enable support for Amplicon PC263 and PCI263 relay boards
779 To compile this driver as a module, choose M here: the module will be
782 config COMEDI_AMPLC_PCI224
783 tristate "Amplicon PCI224 and PCI234 support"
787 Enable support for Amplicon PCI224 and PCI234 AO boards
789 To compile this driver as a module, choose M here: the module will be
792 config COMEDI_AMPLC_PCI230
793 tristate "Amplicon PCI230 and PCI260 support"
797 Enable support for Amplicon PCI230 and PCI260 Multifunction I/O
800 To compile this driver as a module, choose M here: the module will be
803 config COMEDI_CONTEC_PCI_DIO
804 tristate "Contec PIO1616L digital I/O board support"
807 Enable support for the Contec PIO1616L digital I/O board
809 To compile this driver as a module, choose M here: the module will be
810 called contec_pci_dio.
813 tristate "Data Translation DT3000 series support"
816 Enable support for Data Translation DT3000 series
817 DT3001, DT3001-PGL, DT3002, DT3003, DT3003-PGL, DT3004, DT3005 and
820 To compile this driver as a module, choose M here: the module will be
823 config COMEDI_UNIOXX5
824 tristate "Fastwel UNIOxx-5 analog and digital io board support"
827 Enable support for Fastwel UNIOxx-5 (analog and digital i/o) boards
829 To compile this driver as a module, choose M here: the module will be
832 config COMEDI_GSC_HPDI
833 tristate "General Standards PCI-HPDI32 / PMC-HPDI32 support"
837 Enable support for General Standards Corporation high speed parallel
838 digital interface rs485 boards PCI-HPDI32 and PMC-HPDI32.
839 Only receive mode works, transmit not supported.
841 To compile this driver as a module, choose M here: the module will be
844 config COMEDI_ICP_MULTI
845 tristate "Inova ICP_MULTI support"
848 Enable support for Inova ICP_MULTI card
850 To compile this driver as a module, choose M here: the module will be
853 config COMEDI_II_PCI20KC
854 tristate "Intelligent Instruments PCI-20001C carrier support"
857 Enable support for Intelligent Instruments PCI-20001C carrier
858 PCI-20001, PCI-20006 and PCI-20341
860 To compile this driver as a module, choose M here: the module will be
863 config COMEDI_DAQBOARD2000
864 tristate "IOtech DAQboard/2000 support"
868 Enable support for the IOtech DAQboard/2000
870 To compile this driver as a module, choose M here: the module will be
873 config COMEDI_JR3_PCI
874 tristate "JR3/PCI force sensor board support"
877 Enable support for JR3/PCI force sensor boards
879 To compile this driver as a module, choose M here: the module will be
882 config COMEDI_KE_COUNTER
883 tristate "Kolter-Electronic PCI Counter 1 card support"
886 Enable support for Kolter-Electronic PCI Counter 1 cards
888 To compile this driver as a module, choose M here: the module will be
891 config COMEDI_CB_PCIDAS64
892 tristate "MeasurementComputing PCI-DAS 64xx, 60xx, and 4020 support"
897 Enable support for ComputerBoards/MeasurementComputing PCI-DAS 64xx,
898 60xx, and 4020 series with the PLX 9080 PCI controller
900 To compile this driver as a module, choose M here: the module will be
903 config COMEDI_CB_PCIDAS
904 tristate "MeasurementComputing PCI-DAS support"
909 Enable support for ComputerBoards/MeasurementComputing PCI-DAS with
910 AMCC S5933 PCIcontroller: PCI-DAS1602/16, PCI-DAS1602/16jr,
911 PCI-DAS1602/12, PCI-DAS1200, PCI-DAS1200jr, PCI-DAS1000, PCI-DAS1001
914 To compile this driver as a module, choose M here: the module will be
917 config COMEDI_CB_PCIDDA
918 tristate "MeasurementComputing PCI-DDA series support"
922 Enable support for ComputerBoards/MeasurementComputing PCI-DDA
923 series: PCI-DDA08/12, PCI-DDA04/12, PCI-DDA02/12, PCI-DDA08/16,
924 PCI-DDA04/16 and PCI-DDA02/16
926 To compile this driver as a module, choose M here: the module will be
929 config COMEDI_CB_PCIDIO
930 tristate "MeasurementComputing PCI-DIO series support"
934 Enable support for ComputerBoards/MeasurementComputing PCI-DIO series
935 PCI-DIO24, PCI-DIO24H and PCI-DIO48H
937 To compile this driver as a module, choose M here: the module will be
940 config COMEDI_CB_PCIMDAS
941 tristate "MeasurementComputing PCIM-DAS1602/16 support"
945 Enable support for ComputerBoards/MeasurementComputing PCI Migration
946 series PCIM-DAS1602/16
948 To compile this driver as a module, choose M here: the module will be
951 config COMEDI_CB_PCIMDDA
952 tristate "MeasurementComputing PCIM-DDA06-16 support"
956 Enable support for ComputerBoards/MeasurementComputing PCIM-DDA06-16
958 To compile this driver as a module, choose M here: the module will be
962 tristate "Meilhaus ME-4000 support"
965 Enable support for Meilhaus PCI data acquisition cards
966 ME-4650, ME-4670i, ME-4680, ME-4680i and ME-4680is
968 To compile this driver as a module, choose M here: the module will be
972 tristate "Meilhaus ME-2000i, ME-2600i, ME-3000vm1 support"
975 Enable support for Meilhaus PCI data acquisition cards
976 ME-2000i, ME-2600i and ME-3000vm1
978 To compile this driver as a module, choose M here: the module will be
981 config COMEDI_NI_6527
982 tristate "NI 6527 support"
983 depends on COMEDI_MITE
986 Enable support for the National Instruments 6527 PCI card
988 To compile this driver as a module, choose M here: the module will be
991 config COMEDI_NI_65XX
992 tristate "NI 65xx static dio PCI card support"
993 depends on COMEDI_MITE
996 Enable support for National Instruments 65xx static dio boards.
997 Supported devices: National Instruments PCI-6509 (ni_65xx),
998 PXI-6509, PCI-6510, PCI-6511, PXI-6511, PCI-6512, PXI-6512, PCI-6513,
999 PXI-6513, PCI-6514, PXI-6514, PCI-6515, PXI-6515, PCI-6516, PCI-6517,
1000 PCI-6518, PCI-6519, PCI-6520, PCI-6521, PXI-6521, PCI-6528, PXI-6528
1002 To compile this driver as a module, choose M here: the module will be
1005 config COMEDI_NI_660X
1006 tristate "NI 660x counter/timer PCI card support"
1007 depends on COMEDI_NI_TIO && COMEDI_NI_COMMON
1010 Enable support for National Instruments PCI-6601 (ni_660x), PCI-6602,
1011 PXI-6602 and PXI-6608.
1013 To compile this driver as a module, choose M here: the module will be
1016 config COMEDI_NI_670X
1017 tristate "NI 670x PCI card support"
1018 depends on COMEDI_MITE
1021 Enable support for National Instruments PCI-6703 and PCI-6704
1023 To compile this driver as a module, choose M here: the module will be
1026 config COMEDI_NI_PCIDIO
1027 tristate "NI PCI-DIO32HS, PCI-DIO96, PCI-6533, PCI-6503 support"
1028 depends on COMEDI_MITE
1032 Enable support for National Instruments PCI-DIO-32HS, PXI-6533,
1033 PCI-DIO-96, PCI-DIO-96B, PXI-6508, PCI-6503, PCI-6503B, PCI-6503X,
1034 PXI-6503, PCI-6533 and PCI-6534
1035 The DIO-96 appears as four 8255 subdevices. See the 8255
1036 driver notes for details.
1038 To compile this driver as a module, choose M here: the module will be
1041 config COMEDI_NI_PCIMIO
1042 tristate "NI PCI-MIO-E series and M series support"
1043 depends on COMEDI_NI_TIO && COMEDI_NI_COMMON
1048 Enable support for National Instruments PCI-MIO-E series and M series
1049 (all boards): PCI-MIO-16XE-10, PXI-6030E, PCI-MIO-16E-1,
1050 PCI-MIO-16E-4, PCI-6014, PCI-6040E, PXI-6040E, PCI-6030E, PCI-6031E,
1051 PCI-6032E, PCI-6033E, PCI-6071E, PCI-6023E, PCI-6024E, PCI-6025E,
1052 PXI-6025E, PCI-6034E, PCI-6035E, PCI-6052E, PCI-6110, PCI-6111,
1053 PCI-6220, PCI-6221, PCI-6224, PXI-6224, PCI-6225, PXI-6225, PCI-6229,
1054 PCI-6250, PCI-6251, PCIe-6251, PCI-6254, PCI-6259, PCIe-6259,
1055 PCI-6280, PCI-6281, PXI-6281, PCI-6284, PCI-6289, PCI-6711, PXI-6711,
1056 PCI-6713, PXI-6713, PXI-6071E, PCI-6070E, PXI-6070E, PXI-6052E,
1057 PCI-6036E, PCI-6731, PCI-6733, PXI-6733, PCI-6143, PXI-6143
1059 To compile this driver as a module, choose M here: the module will be
1062 config COMEDI_RTD520
1063 tristate "Real Time Devices PCI4520/DM7520 support"
1067 Enable support for Real Time Devices PCI4520/DM7520
1069 To compile this driver as a module, choose M here: the module will be
1073 tristate "Sensoray s526 support"
1076 Enable support for Sensoray s526
1078 To compile this driver as a module, choose M here: the module will be
1082 tristate "Sensoray 626 support"
1086 Enable support for Sensoray 626
1088 To compile this driver as a module, choose M here: the module will be
1091 config COMEDI_SSV_DNP
1092 tristate "SSV Embedded Systems DIL/Net-PC support"
1095 Enable support for SSV Embedded Systems DIL/Net-PC
1097 To compile this driver as a module, choose M here: the module will be
1100 endif # COMEDI_PCI_DRIVERS
1102 menuconfig COMEDI_PCMCIA_DRIVERS
1103 tristate "Comedi PCMCIA drivers"
1104 depends on COMEDI && (PCMCIA || PCCARD)
1107 Enable comedi PCMCIA and PCCARD drivers to be built
1109 Note that the answer to this question won't directly affect the
1110 kernel: saying N will just cause the configurator to skip all
1111 the questions about PCMCIA comedi drivers.
1113 if COMEDI_PCMCIA_DRIVERS && PCMCIA
1115 config COMEDI_CB_DAS16_CS
1116 tristate "CB DAS16 series PCMCIA support"
1119 Enable support for the ComputerBoards/MeasurementComputing PCMCIA
1120 cards DAS16/16, PCM-DAS16D/12 and PCM-DAS16s/16
1122 To compile this driver as a module, choose M here: the module will be
1125 config COMEDI_DAS08_CS
1126 tristate "CB DAS08 PCMCIA support"
1130 Enable support for the ComputerBoards/MeasurementComputing DAS-08
1133 To compile this driver as a module, choose M here: the module will be
1136 config COMEDI_NI_DAQ_700_CS
1137 tristate "NI DAQCard-700 PCMCIA support"
1138 depends on COMEDI_NI_COMMON
1141 Enable support for the National Instruments PCMCIA DAQCard-700 DIO
1143 To compile this driver as a module, choose M here: the module will be
1146 config COMEDI_NI_DAQ_DIO24_CS
1147 tristate "NI DAQ-Card DIO-24 PCMCIA support"
1148 depends on COMEDI_NI_COMMON
1152 Enable support for the National Instruments PCMCIA DAQ-Card DIO-24
1154 To compile this driver as a module, choose M here: the module will be
1155 called ni_daq_dio24.
1157 config COMEDI_NI_LABPC_CS
1158 tristate "NI DAQCard-1200 PCMCIA support"
1159 depends on COMEDI_NI_LABPC
1162 Enable support for the National Instruments PCMCIA DAQCard-1200
1164 To compile this driver as a module, choose M here: the module will be
1167 config COMEDI_NI_MIO_CS
1168 tristate "NI DAQCard E series PCMCIA support"
1169 depends on COMEDI_NI_TIO && COMEDI_NI_COMMON
1174 Enable support for the National Instruments PCMCIA DAQCard E series
1175 DAQCard-ai-16xe-50, DAQCard-ai-16e-4, DAQCard-6062E, DAQCard-6024E
1178 To compile this driver as a module, choose M here: the module will be
1181 config COMEDI_QUATECH_DAQP_CS
1182 tristate "Quatech DAQP PCMCIA data capture card support"
1185 Enable support for the Quatech DAQP PCMCIA data capture cards
1186 DAQP-208 and DAQP-308
1188 To compile this driver as a module, choose M here: the module will be
1189 called quatech_daqp_cs.
1191 endif # COMEDI_PCMCIA_DRIVERS
1193 menuconfig COMEDI_USB_DRIVERS
1194 tristate "Comedi USB drivers"
1195 depends on COMEDI && USB
1198 Enable comedi USB drivers to be built
1200 Note that the answer to this question won't directly affect the
1201 kernel: saying N will just cause the configurator to skip all
1202 the questions about USB comedi drivers.
1204 if COMEDI_USB_DRIVERS && USB
1206 config COMEDI_DT9812
1207 tristate "DataTranslation DT9812 USB module support"
1210 Enable support for the Data Translation DT9812 USB module
1212 To compile this driver as a module, choose M here: the module will be
1215 config COMEDI_USBDUX
1216 tristate "ITL USBDUX support"
1219 Enable support for the University of Stirling USB DAQ and INCITE
1220 Technology Limited driver
1222 To compile this driver as a module, choose M here: the module will be
1225 config COMEDI_USBDUXFAST
1226 tristate "ITL USB-DUXfast support"
1230 Enable support for the University of Stirling USB-DUXfast and INCITE
1231 Technology Limited driver
1233 To compile this driver as a module, choose M here: the module will be
1236 config COMEDI_VMK80XX
1237 tristate "Velleman VM110/VM140 USB Board support"
1240 Build the Velleman USB Board Low-Level Driver supporting the
1241 K8055/K8061 aka VM110/VM140 devices
1243 To compile this driver as a module, choose M here: the module will be
1246 endif # COMEDI_USB_DRIVERS
1248 menuconfig COMEDI_NI_COMMON
1249 tristate "Comedi National Instruments card support"
1253 Enable comedi support for National Instruments cards.
1254 Modules in this section are used by many comedi NI drivers.
1256 Note that the answer to this question won't directly affect the
1257 kernel: saying N will just cause the configurator to skip all
1258 the questions about National Instruments cards.
1263 tristate "NI Mite PCI interface chip support"
1267 Enable support for National Instruments Mite PCI interface chip
1269 To compile this driver as a module, choose M here: the module will be
1272 config COMEDI_NI_TIO
1273 tristate "NI general purpose counter support"
1274 depends on COMEDI_MITE
1277 Enable support for National Instruments general purpose counters.
1278 This module is not used directly by end-users. Rather, it
1279 is used by other drivers (for example ni_660x and ni_pcimio)
1280 to provide support for NI's general purpose counters.
1282 To compile this driver as a modules, choose M here: two modules will
1283 be build: ni_tio and ni_tiocmd.
1285 config COMEDI_NI_LABPC
1286 tristate "NI Lab-PC and compatibles ISA and PCI support"
1287 depends on COMEDI_MITE
1292 Enable support for National Instruments Lab-PC and compatibles
1293 Lab-PC-1200, Lab-PC-1200AI, Lab-PC+ and PCI-1200.
1294 Kernel-level ISA plug-and-play support for the lab-pc-1200 boards has
1295 not yet been added to the driver.
1297 To compile this driver as a module, choose M here: the module will be
1300 endif # COMEDI_NI_COMMON
1303 tristate "Generic 8255 support"
1307 Enable generic 8255 support.
1309 You should enable compilation this driver if you plan to use a board
1310 that has an 8255 chip. For multifunction boards, the main driver will
1311 configure the 8255 subdevice automatically.
1313 Note that most PCI 8255 boards do NOT work with this driver, and
1314 need a separate driver as a wrapper.
1316 To compile this driver as a module, choose M here: the module will be
1320 tristate "DAS-08 compatible support"
1325 Enable support for DAS08 and compatible ISA, PC/104 and PCI cards.
1327 Note that PCMCIA DAS08 cards are not directly supported by this
1328 driver, and need a separate driver as a wrapper.
1330 To compile this driver as a module, choose M here: the module will be
1334 tristate "Comedi shared functions for low-level driver support"
1338 Enable support for shared functions for low-level drivers.
1339 This module is not used directly by end-users. Rather, it
1340 is used by many other comedi drivers.
1342 To compile this driver as a module, choose M here: the module will be