drivers/staging/comedi/Kconfig

   1 config COMEDI
   2         tristate "Data acquisition support (comedi)"
   3         depends on m
   4         ---help---
   5           Enable support a wide range of data acquisition devices
   6           for Linux.
   7
   8 if COMEDI
   9
  10 config COMEDI_DEBUG
  11         bool "Comedi debugging"
  12         ---help---
  13           This is an option for use by developers; most people should
  14           say N here. This enables comedi core and driver debugging.
  15
  16 config COMEDI_DEFAULT_BUF_SIZE_KB
  17         int "Comedi default initial asynchronous buffer size in KiB"
  18         default "2048"
  19         ---help---
  20           This is the default asynchronous buffer size which is used for
  21           commands running in the background in kernel space.  This
  22           defaults to 2048 KiB of memory so that a 16 channel card
  23           running at 10 kHz has of 2-4 seconds of buffer.
  24
  25 config COMEDI_DEFAULT_BUF_MAXSIZE_KB
  26         int "Comedi default maximum asynchronous buffer size in KiB"
  27         default "20480"
  28         ---help---
  29           This is the default maximum asynchronous buffer size which can
  30           be requested by a userspace program without root privileges.
  31           This is set to 20480 KiB so that a fast I/O card with 16
  32           channels running at 100 kHz has 2-4 seconds of buffer.
  33
  34 menuconfig COMEDI_MISC_DRIVERS
  35         bool "Comedi misc drivers"
  36         ---help---
  37           Enable comedi misc drivers to be built
  38
  39           Note that the answer to this question won't directly affect the
  40           kernel: saying N will just cause the configurator to skip all
  41           the questions about misc non-hardware comedi drivers.
  42
  43 if COMEDI_MISC_DRIVERS
  44
  45 config COMEDI_KCOMEDILIB
  46         tristate "Comedi kcomedilib"
  47         ---help---
  48           Build the kcomedilib
  49
  50 config COMEDI_BOND
  51         tristate "Device bonding support"
  52         depends on COMEDI_KCOMEDILIB
  53         ---help---
  54           Enable support for a driver to 'bond' (merge) multiple subdevices
  55           from multiple devices together as one.
  56
  57           To compile this driver as a module, choose M here: the module will be
  58           called comedi_bond.
  59
  60 config COMEDI_TEST
  61         tristate "Fake waveform generator support"
  62         select COMEDI_FC
  63         ---help---
  64           Enable support for the fake waveform generator.
  65           This driver is mainly for testing purposes, but can also be used to
  66           generate sample waveforms on systems that don't have data acquisition
  67           hardware.
  68
  69           To compile this driver as a module, choose M here: the module will be
  70           called comedi_test.
  71
  72 config COMEDI_PARPORT
  73         tristate "Parallel port support"
  74         ---help---
  75           Enable support for the standard parallel port.
  76           A cheap and easy way to get a few more digital I/O lines. Steal
  77           additional parallel ports from old computers or your neighbors'
  78           computers.
  79
  80           To compile this driver as a module, choose M here: the module will be
  81           called comedi_parport.
  82
  83 config COMEDI_SERIAL2002
  84         tristate "Driver for serial connected hardware"
  85         ---help---
  86           Enable support for serial connected hardware
  87
  88           To compile this driver as a module, choose M here: the module will be
  89           called serial2002.
  90
  91 config COMEDI_SKEL
  92         tristate "Comedi skeleton driver"
  93         ---help---
  94           Build the Skeleton driver, an example for driver writers
  95
  96           To compile this driver as a module, choose M here: the module will be
  97           called skel.
  98
  99 endif # COMEDI_MISC_DRIVERS
 100
 101 menuconfig COMEDI_ISA_DRIVERS
 102         bool "Comedi ISA and PC/104 drivers"
 103         depends on ISA
 104         ---help---
 105           Enable comedi ISA and PC/104 drivers to be built
 106
 107           Note that the answer to this question won't directly affect the
 108           kernel: saying N will just cause the configurator to skip all
 109           the questions about ISA and PC/104 comedi drivers.
 110
 111 if COMEDI_ISA_DRIVERS
 112
 113 config COMEDI_ACL7225B
 114         tristate "ADlink NuDAQ ACL-7225b and compatibles support"
 115         ---help---
 116           Enable support for ADlink NuDAQ ACL-7225b and compatibles,
 117           ADlink ACL-7225b (acl7225b), ICP P16R16DIO (p16r16dio)
 118
 119           To compile this driver as a module, choose M here: the module will be
 120           called acl7225b.
 121
 122 config COMEDI_PCL711
 123         tristate "Advantech PCL-711/711b and ADlink ACL-8112 ISA card support"
 124         ---help---
 125           Enable support for Advantech PCL-711 and 711b, ADlink ACL-8112
 126
 127           To compile this driver as a module, choose M here: the module will be
 128           called pcl711.
 129
 130 config COMEDI_PCL724
 131         tristate "Advantech PCL-722/724/731 and ADlink ACL-7122/7124/PET-48DIO"
 132         select COMEDI_8255
 133         ---help---
 134           Enable support for Advantech PCL-724, PCL-722, PCL-731 and
 135           ADlink ACL-7122, ACL-7124, PET-48DIO ISA cards
 136
 137           To compile this driver as a module, choose M here: the module will be
 138           called pcl724.
 139
 140 config COMEDI_PCL725
 141         tristate "Advantech PCL-725 and compatible ISA card support"
 142         ---help---
 143           Enable support for Advantech PCL-725 and compatible ISA cards.
 144
 145           To compile this driver as a module, choose M here: the module will be
 146           called pcl725.
 147
 148 config COMEDI_PCL726
 149         tristate "Advantech PCL-726 and compatible ISA card support"
 150         ---help---
 151           Enable support for Advantech PCL-726 and compatible ISA cards.
 152
 153           To compile this driver as a module, choose M here: the module will be
 154           called pcl726.
 155
 156 config COMEDI_PCL730
 157         tristate "Advantech PCL-730 and ADlink ACL-7130 ISA card support"
 158         ---help---
 159           Enable support for Advantech PCL-730, ICP ISO-730 and ADlink
 160           ACL-7130 ISA cards
 161
 162           To compile this driver as a module, choose M here: the module will be
 163           called pcl730.
 164
 165 config COMEDI_PCL812
 166         tristate "Advantech PCL-812/813 and ADlink ACL-8112/8113/8113/8216"
 167         depends on VIRT_TO_BUS && ISA_DMA_API
 168         ---help---
 169           Enable support for Advantech PCL-812/PG, PCL-813/B, ADLink
 170           ACL-8112DG/HG/PG, ACL-8113, ACL-8216, ICP DAS A-821PGH/PGL/PGL-NDA,
 171           A-822PGH/PGL, A-823PGH/PGL, A-826PG and ICP DAS ISO-813 ISA cards
 172
 173           To compile this driver as a module, choose M here: the module will be
 174           called pcl812.
 175
 176 config COMEDI_PCL816
 177         tristate "Advantech PCL-814 and PCL-816 ISA card support"
 178         depends on VIRT_TO_BUS && ISA_DMA_API
 179         ---help---
 180           Enable support for Advantech PCL-814 and PCL-816 ISA cards
 181
 182           To compile this driver as a module, choose M here: the module will be
 183           called pcl816.
 184
 185 config COMEDI_PCL818
 186         tristate "Advantech PCL-718 and PCL-818 ISA card support"
 187         depends on VIRT_TO_BUS && ISA_DMA_API
 188         ---help---
 189           Enable support for Advantech PCL-818 ISA cards
 190           PCL-818L, PCL-818H, PCL-818HD, PCL-818HG, PCL-818 and PCL-718
 191
 192           To compile this driver as a module, choose M here: the module will be
 193           called pcl818.
 194
 195 config COMEDI_PCM3724
 196         tristate "Advantech PCM-3724 PC/104 card support"
 197         select COMEDI_8255
 198         ---help---
 199           Enable support for Advantech PCM-3724 PC/104 cards.
 200
 201           To compile this driver as a module, choose M here: the module will be
 202           called pcm3724.
 203
 204 config COMEDI_PCM3730
 205         tristate "Advantech PCM-3730 and clone PC/104 board support"
 206         ---help---
 207           Enable support for Advantech PCM-3730 and clone PC/104 boards
 208
 209           To compile this driver as a module, choose M here: the module will be
 210           called pcm3730.
 211
 212 config COMEDI_AMPLC_DIO200_ISA
 213         tristate "Amplicon PC212E/PC214E/PC215E/PC218E/PC272E"
 214         select COMEDI_AMPLC_DIO200
 215         ---help---
 216           Enable support for Amplicon PC212E, PC214E, PC215E, PC218E and
 217           PC272E ISA DIO boards
 218
 219           To compile this driver as a module, choose M here: the module will be
 220           called amplc_dio200.
 221
 222 config COMEDI_AMPLC_PC236_ISA
 223         tristate "Amplicon PC36AT DIO board support"
 224         select COMEDI_AMPLC_PC236
 225         ---help---
 226           Enable support for Amplicon PC36AT ISA DIO board.
 227
 228           To compile this driver as a module, choose M here: the module will be
 229           called amplc_pc236.
 230
 231 config COMEDI_AMPLC_PC263_ISA
 232         tristate "Amplicon PC263 relay board support"
 233         ---help---
 234           Enable support for Amplicon PC263 ISA relay board.  This board has
 235           16 reed relay output channels.
 236
 237           To compile this driver as a module, choose M here: the module will be
 238           called amplc_pc263.
 239
 240 config COMEDI_RTI800
 241         tristate "Analog Devices RTI-800/815 ISA card support"
 242         ---help---
 243           Enable support for Analog Devices RTI-800/815 ISA cards
 244
 245           To compile this driver as a module, choose M here: the module will be
 246           called rti800.
 247
 248 config COMEDI_RTI802
 249         tristate "Analog Devices RTI-802 ISA card support"
 250         ---help---
 251           Enable support for Analog Devices RTI-802 ISA cards
 252
 253           To compile this driver as a module, choose M here: the module will be
 254           called rti802.
 255
 256 config COMEDI_DAS16M1
 257         tristate "MeasurementComputing CIO-DAS16/M1DAS-16 ISA card support"
 258         select COMEDI_8255
 259         select COMEDI_FC
 260         ---help---
 261           Enable support for Measurement Computing CIO-DAS16/M1 ISA cards.
 262
 263           To compile this driver as a module, choose M here: the module will be
 264           called das16m1.
 265
 266 config COMEDI_DAS08_ISA
 267         tristate "DAS-08 compatible ISA and PC/104 card support"
 268         select COMEDI_DAS08
 269         ---help---
 270           Enable support for Keithley Metrabyte/ComputerBoards DAS08
 271           and compatible ISA and PC/104 cards:
 272           Keithley Metrabyte/ComputerBoards DAS08, DAS08-PGM, DAS08-PGH,
 273           DAS08-PGL, DAS08-AOH, DAS08-AOL, DAS08-AOM, DAS08/JR-AO,
 274           DAS08/JR-16-AO, PC104-DAS08, DAS08/JR/16.
 275
 276           To compile this driver as a module, choose M here: the module will be
 277           called das08_isa.
 278
 279 config COMEDI_DAS16
 280         tristate "DAS-16 compatible ISA and PC/104 card support"
 281         depends on ISA_DMA_API
 282         select COMEDI_8255
 283         select COMEDI_FC
 284         ---help---
 285           Enable support for Keithley Metrabyte/ComputerBoards DAS16
 286           and compatible ISA and PC/104 cards:
 287           Keithley Metrabyte DAS-16, DAS-16G, DAS-16F, DAS-1201, DAS-1202,
 288           DAS-1401, DAS-1402, DAS-1601, DAS-1602 and
 289           ComputerBoards/MeasurementComputing PC104-DAS16/JR/,
 290           PC104-DAS16JR/16, CIO-DAS16JR/16, CIO-DAS16/JR, CIO-DAS1401/12,
 291           CIO-DAS1402/12, CIO-DAS1402/16, CIO-DAS1601/12, CIO-DAS1602/12,
 292           CIO-DAS1602/16, CIO-DAS16/330
 293
 294           To compile this driver as a module, choose M here: the module will be
 295           called das16.
 296
 297 config COMEDI_DAS800
 298         tristate "DAS800 and compatible ISA card support"
 299         select COMEDI_FC
 300         ---help---
 301           Enable support for Keithley Metrabyte DAS800 and compatible ISA cards
 302           Keithley Metrabyte DAS-800, DAS-801, DAS-802
 303           Measurement Computing CIO-DAS800, CIO-DAS801, CIO-DAS802 and
 304           CIO-DAS802/16
 305
 306           To compile this driver as a module, choose M here: the module will be
 307           called das800.
 308
 309 config COMEDI_DAS1800
 310         tristate "DAS1800 and compatible ISA card support"
 311         depends on VIRT_TO_BUS && ISA_DMA_API
 312         select COMEDI_FC
 313         ---help---
 314           Enable support for DAS1800 and compatible ISA cards
 315           Keithley Metrabyte DAS-1701ST, DAS-1701ST-DA, DAS-1701/AO,
 316           DAS-1702ST, DAS-1702ST-DA, DAS-1702HR, DAS-1702HR-DA, DAS-1702/AO,
 317           DAS-1801ST, DAS-1801ST-DA, DAS-1801HC, DAS-1801AO, DAS-1802ST,
 318           DAS-1802ST-DA, DAS-1802HR, DAS-1802HR-DA, DAS-1802HC and
 319           DAS-1802AO
 320
 321           To compile this driver as a module, choose M here: the module will be
 322           called das1800.
 323
 324 config COMEDI_DAS6402
 325         tristate "DAS6402 and compatible ISA card support"
 326         ---help---
 327           Enable support for DAS6402 and compatible ISA cards
 328           Computerboards, Keithley Metrabyte DAS6402 and compatibles
 329
 330           To compile this driver as a module, choose M here: the module will be
 331           called das6402.
 332
 333 config COMEDI_DT2801
 334         tristate "Data Translation DT2801 ISA card support"
 335         ---help---
 336           Enable support for Data Translation DT2801 ISA cards
 337
 338           To compile this driver as a module, choose M here: the module will be
 339           called dt2801.
 340
 341 config COMEDI_DT2811
 342         tristate "Data Translation DT2811 ISA card support"
 343         ---help---
 344           Enable support for Data Translation DT2811 ISA cards
 345
 346           To compile this driver as a module, choose M here: the module will be
 347           called dt2811.
 348
 349 config COMEDI_DT2814
 350         tristate "Data Translation DT2814 ISA card support"
 351         ---help---
 352           Enable support for Data Translation DT2814 ISA cards
 353
 354           To compile this driver as a module, choose M here: the module will be
 355           called dt2814.
 356
 357 config COMEDI_DT2815
 358         tristate "Data Translation DT2815 ISA card support"
 359         ---help---
 360           Enable support for Data Translation DT2815 ISA cards
 361
 362           To compile this driver as a module, choose M here: the module will be
 363           called dt2815.
 364
 365 config COMEDI_DT2817
 366         tristate "Data Translation DT2817 ISA card support"
 367         ---help---
 368           Enable support for Data Translation DT2817 ISA cards
 369
 370           To compile this driver as a module, choose M here: the module will be
 371           called dt2817.
 372
 373 config COMEDI_DT282X
 374         tristate "Data Translation DT2821 series and DT-EZ ISA card support"
 375         select COMEDI_FC
 376         depends on VIRT_TO_BUS && ISA_DMA_API
 377         ---help---
 378           Enable support for Data Translation DT2821 series including DT-EZ
 379           DT2821, DT2821-F-16SE, DT2821-F-8DI, DT2821-G-16SE, DT2821-G-8DI,
 380           DT2823 (dt2823), DT2824-PGH, DT2824-PGL, DT2825, DT2827, DT2828,
 381           DT21-EZ, DT23-EZ, DT24-EZ and DT24-EZ-PGL
 382
 383           To compile this driver as a module, choose M here: the module will be
 384           called dt282x.
 385
 386 config COMEDI_DMM32AT
 387         tristate "Diamond Systems MM-32-AT PC/104 board support"
 388         ---help---
 389           Enable support for Diamond Systems MM-32-AT PC/104 boards
 390
 391           To compile this driver as a module, choose M here: the module will be
 392           called dmm32at.
 393
 394 config COMEDI_FL512
 395         tristate "FL512 ISA card support"
 396         ---help---
 397           Enable support for FL512 ISA card
 398
 399           To compile this driver as a module, choose M here: the module will be
 400           called fl512.
 401
 402 config COMEDI_AIO_AIO12_8
 403         tristate "I/O Products PC/104 AIO12-8 Analog I/O Board support"
 404         select COMEDI_8255
 405         ---help---
 406           Enable support for I/O Products PC/104 AIO12-8 Analog I/O Board
 407
 408           To compile this driver as a module, choose M here: the module will be
 409           called aio_aio12_8.
 410
 411 config COMEDI_AIO_IIRO_16
 412         tristate "I/O Products PC/104 IIRO16 Board support"
 413         ---help---
 414           Enable support for I/O Products PC/104 IIRO16 Relay And Isolated
 415           Input Board
 416
 417           To compile this driver as a module, choose M here: the module will be
 418           called aio_iiro_16.
 419
 420 config COMEDI_C6XDIGIO
 421         tristate "Mechatronic Systems Inc. C6x_DIGIO DSP daughter card support"
 422         ---help---
 423           Enable support for Mechatronic Systems Inc. C6x_DIGIO DSP daughter
 424           card
 425
 426           To compile this driver as a module, choose M here: the module will be
 427           called c6xdigio.
 428
 429 config COMEDI_MPC624
 430         tristate "Micro/sys MPC-624 PC/104 board support"
 431         ---help---
 432           Enable support for Micro/sys MPC-624 PC/104 board
 433
 434           To compile this driver as a module, choose M here: the module will be
 435           called mpc624.
 436
 437 config COMEDI_ADQ12B
 438         tristate "MicroAxial ADQ12-B data acquisition and control card support"
 439         ---help---
 440           Enable MicroAxial ADQ12-B daq and control card support.
 441
 442           To compile this driver as a module, choose M here: the module will be
 443           called adq12b.
 444
 445 config COMEDI_NI_AT_A2150
 446         tristate "NI AT-A2150 ISA card support"
 447         select COMEDI_FC
 448         depends on VIRT_TO_BUS && ISA_DMA_API
 449         ---help---
 450           Enable support for National Instruments AT-A2150 cards
 451
 452           To compile this driver as a module, choose M here: the module will be
 453           called ni_at_a2150.
 454
 455 config COMEDI_NI_AT_AO
 456         tristate "NI AT-AO-6/10 EISA card support"
 457         ---help---
 458           Enable support for National Instruments AT-AO-6/10 cards
 459
 460           To compile this driver as a module, choose M here: the module will be
 461           called ni_at_ao.
 462
 463 config COMEDI_NI_ATMIO
 464         tristate "NI AT-MIO E series ISA-PNP card support"
 465         depends on ISAPNP
 466         select COMEDI_8255
 467         select COMEDI_NI_TIO
 468         ---help---
 469           Enable support for National Instruments AT-MIO E series cards
 470           National Instruments AT-MIO-16E-1 (ni_atmio),
 471           AT-MIO-16E-2, AT-MIO-16E-10, AT-MIO-16DE-10, AT-MIO-64E-3,
 472           AT-MIO-16XE-50, AT-MIO-16XE-10, AT-AI-16XE-10
 473
 474           To compile this driver as a module, choose M here: the module will be
 475           called ni_atmio.
 476
 477 config COMEDI_NI_ATMIO16D
 478         tristate "NI AT-MIO16/AT-MIO16D series ISA-PNP card support"
 479         depends on ISAPNP
 480         select COMEDI_8255
 481         ---help---
 482           Enable support for National Instruments AT-MIO16/AT-MIO16D cards.
 483
 484           To compile this driver as a module, choose M here: the module will be
 485           called ni_atmio16d.
 486
 487 config COMEDI_PCMAD
 488         tristate "Winsystems PCM-A/D12 and PCM-A/D16 PC/104 board support"
 489         ---help---
 490           Enable support for Winsystems PCM-A/D12 and PCM-A/D16 PC/104 boards.
 491
 492           To compile this driver as a module, choose M here: the module will be
 493           called pcmad.
 494
 495 config COMEDI_PCMDA12
 496         tristate "Winsystems PCM-D/A-12 8-channel AO PC/104 board support"
 497         ---help---
 498           Enable support for Winsystems PCM-D/A-12 8-channel AO PC/104 boards.
 499           Note that the board is not ISA-PNP capable and thus needs the I/O
 500           port comedi_config parameter.
 501
 502           To compile this driver as a module, choose M here: the module will be
 503           called pcmda12.
 504
 505 config COMEDI_PCMMIO
 506         tristate "Winsystems PCM-MIO PC/104 board support"
 507         ---help---
 508           Enable support for Winsystems PCM-MIO multifunction PC/104 boards.
 509
 510           To compile this driver as a module, choose M here: the module will be
 511           called pcmmio.
 512
 513 config COMEDI_PCMUIO
 514         tristate "Winsystems PCM-UIO48A and PCM-UIO96A PC/104 board support"
 515         ---help---
 516           Enable support for PCM-UIO48A and PCM-UIO96A PC/104 boards.
 517
 518           To compile this driver as a module, choose M here: the module will be
 519           called pcmuio.
 520
 521 config COMEDI_MULTIQ3
 522         tristate "Quanser Consulting MultiQ-3 ISA card support"
 523         ---help---
 524           Enable support for Quanser Consulting MultiQ-3 ISA cards
 525
 526           To compile this driver as a module, choose M here: the module will be
 527           called multiq3.
 528
 529 config COMEDI_POC
 530         tristate "Generic driver for very simple devices"
 531         ---help---
 532           Enable generic support for very simple / POC (Piece of Crap) boards,
 533           Keithley Metrabyte DAC-02 (dac02), Advantech PCL-733 (pcl733) and
 534           PCL-734 (pcl734)
 535
 536           To compile this driver as a module, choose M here: the module will be
 537           called poc.
 538
 539 endif # COMEDI_ISA_DRIVERS
 540
 541 menuconfig COMEDI_PCI_DRIVERS
 542         bool "Comedi PCI drivers"
 543         depends on PCI
 544         ---help---
 545           Enable support for comedi PCI drivers.
 546
 547 if COMEDI_PCI_DRIVERS
 548
 549 config COMEDI_8255_PCI
 550         tristate "Generic PCI based 8255 digital i/o board support"
 551         select COMEDI_8255
 552         ---help---
 553           Enable support for PCI based 8255 digital i/o boards. This driver
 554           provides a PCI wrapper around the generic 8255 driver.
 555
 556           Supported boards:
 557             ADlink - PCI-7224, PCI-7248, and PCI-7296
 558             Measurement Computing - PCI-DIO24, PCI-DIO24H, PCI-DIO48H and
 559                                     PCI-DIO96H
 560             National Instruments - PCI-DIO-96, PCI-DIO-96B, PXI-6508, PCI-6503,
 561                                    PCI-6503B, PCI-6503X, and PXI-6503
 562
 563           To compile this driver as a module, choose M here: the module will
 564           be called 8255_pci.
 565
 566 config COMEDI_ADDI_WATCHDOG
 567         tristate
 568         ---help---
 569           Provides support for the watchdog subdevice found on many ADDI-DATA
 570           boards. This module will be automatically selected when needed. The
 571           module will be called addi_watchdog.
 572
 573 config COMEDI_ADDI_APCI_035
 574         tristate "ADDI-DATA APCI_035 support"
 575         ---help---
 576           Enable support for ADDI-DATA APCI_035 cards
 577
 578           To compile this driver as a module, choose M here: the module will be
 579           called addi_apci_035.
 580
 581 config COMEDI_ADDI_APCI_1032
 582         tristate "ADDI-DATA APCI_1032 support"
 583         ---help---
 584           Enable support for ADDI-DATA APCI_1032 cards
 585
 586           To compile this driver as a module, choose M here: the module will be
 587           called addi_apci_1032.
 588
 589 config COMEDI_ADDI_APCI_1500
 590         tristate "ADDI-DATA APCI_1500 support"
 591         ---help---
 592           Enable support for ADDI-DATA APCI_1500 cards
 593
 594           To compile this driver as a module, choose M here: the module will be
 595           called addi_apci_1500.
 596
 597 config COMEDI_ADDI_APCI_1516
 598         tristate "ADDI-DATA APCI-1016/1516/2016 support"
 599         select COMEDI_ADDI_WATCHDOG
 600         ---help---
 601           Enable support for ADDI-DATA APCI-1016, APCI-1516 and APCI-2016 boards.
 602           These are 16 channel, optically isolated, digital I/O boards. The 1516
 603           and 2016 boards also have a watchdog for resetting the outputs to "0".
 604
 605           To compile this driver as a module, choose M here: the module will be
 606           called addi_apci_1516.
 607
 608 config COMEDI_ADDI_APCI_1564
 609         tristate "ADDI-DATA APCI_1564 support"
 610         ---help---
 611           Enable support for ADDI-DATA APCI_1564 cards
 612
 613           To compile this driver as a module, choose M here: the module will be
 614           called addi_apci_1564.
 615
 616 config COMEDI_ADDI_APCI_16XX
 617         tristate "ADDI-DATA APCI_16xx support"
 618         ---help---
 619           Enable support for ADDI-DATA APCI_16xx cards
 620
 621           To compile this driver as a module, choose M here: the module will be
 622           called addi_apci_16xx.
 623
 624 config COMEDI_ADDI_APCI_2032
 625         tristate "ADDI-DATA APCI_2032 support"
 626         select COMEDI_ADDI_WATCHDOG
 627         ---help---
 628           Enable support for ADDI-DATA APCI_2032 cards
 629
 630           To compile this driver as a module, choose M here: the module will be
 631           called addi_apci_2032.
 632
 633 config COMEDI_ADDI_APCI_2200
 634         tristate "ADDI-DATA APCI_2200 support"
 635         select COMEDI_ADDI_WATCHDOG
 636         ---help---
 637           Enable support for ADDI-DATA APCI_2200 cards
 638
 639           To compile this driver as a module, choose M here: the module will be
 640           called addi_apci_2200.
 641
 642 config COMEDI_ADDI_APCI_3120
 643         tristate "ADDI-DATA APCI_3120/3001 support"
 644         depends on VIRT_TO_BUS
 645         select COMEDI_FC
 646         ---help---
 647           Enable support for ADDI-DATA APCI_3120/3001 cards
 648
 649           To compile this driver as a module, choose M here: the module will be
 650           called addi_apci_3120.
 651
 652 config COMEDI_ADDI_APCI_3501
 653         tristate "ADDI-DATA APCI_3501 support"
 654         ---help---
 655           Enable support for ADDI-DATA APCI_3501 cards
 656
 657           To compile this driver as a module, choose M here: the module will be
 658           called addi_apci_3501.
 659
 660 config COMEDI_ADDI_APCI_3XXX
 661         tristate "ADDI-DATA APCI_3xxx support"
 662         ---help---
 663           Enable support for ADDI-DATA APCI_3xxx cards
 664
 665           To compile this driver as a module, choose M here: the module will be
 666           called addi_apci_3xxx.
 667
 668 config COMEDI_ADL_PCI6208
 669         tristate "ADLink PCI-6208A support"
 670         ---help---
 671           Enable support for ADLink PCI-6208A cards
 672
 673           To compile this driver as a module, choose M here: the module will be
 674           called adl_pci6208.
 675
 676 config COMEDI_ADL_PCI7X3X
 677         tristate "ADLink PCI-723X/743X isolated digital i/o board support"
 678         ---help---
 679           Enable support for ADlink PCI-723X/743X isolated digital i/o boards.
 680           Supported boards include the 32-channel PCI-7230 (16 in/16 out),
 681           PCI-7233 (32 in), and PCI-7234 (32 out) as well as the 64-channel
 682           PCI-7432 (32 in/32 out), PCI-7433 (64 in), and PCI-7434 (64 out).
 683
 684           To compile this driver as a module, choose M here: the module will be
 685           called adl_pci7x3x.
 686
 687 config COMEDI_ADL_PCI8164
 688         tristate "ADLink PCI-8164 4 Axes Motion Control board support"
 689         ---help---
 690           Enable support for ADlink PCI-8164 4 Axes Motion Control board
 691
 692           To compile this driver as a module, choose M here: the module will be
 693           called adl_pci8164.
 694
 695 config COMEDI_ADL_PCI9111
 696         tristate "ADLink PCI-9111HR support"
 697         select COMEDI_FC
 698         ---help---
 699           Enable support for ADlink PCI9111 cards
 700
 701           To compile this driver as a module, choose M here: the module will be
 702           called adl_pci9111.
 703
 704 config COMEDI_ADL_PCI9118
 705         tristate "ADLink PCI-9118DG, PCI-9118HG, PCI-9118HR support"
 706         select COMEDI_FC
 707         depends on VIRT_TO_BUS
 708         ---help---
 709           Enable support for ADlink PCI-9118DG, PCI-9118HG, PCI-9118HR cards
 710
 711           To compile this driver as a module, choose M here: the module will be
 712           called adl_pci9118.
 713
 714 config COMEDI_ADV_PCI1710
 715         tristate "Advantech PCI-171x, PCI-1720 and PCI-1731 support"
 716         ---help---
 717           Enable support for Advantech PCI-1710, PCI-1710HG, PCI-1711,
 718           PCI-1713, PCI-1720 and PCI-1731
 719
 720           To compile this driver as a module, choose M here: the module will be
 721           called adv_pci1710.
 722
 723 config COMEDI_ADV_PCI1723
 724         tristate "Advantech PCI-1723 support"
 725         ---help---
 726           Enable support for Advantech PCI-1723 cards
 727
 728           To compile this driver as a module, choose M here: the module will be
 729           called adv_pci1723.
 730
 731 config COMEDI_ADV_PCI1724
 732         tristate "Advantech PCI-1724U support"
 733         ---help---
 734           Enable support for Advantech PCI-1724U cards.  These are 32-channel
 735           analog output cards with voltage and current loop output ranges and
 736           14-bit resolution.
 737
 738           To compile this driver as a module, choose M here: the module will be
 739           called adv_pci1724.
 740
 741 config COMEDI_ADV_PCI_DIO
 742         tristate "Advantech PCI DIO card support"
 743         select COMEDI_8255
 744         ---help---
 745           Enable support for Advantech PCI DIO cards
 746           PCI-1730, PCI-1733, PCI-1734, PCI-1735U, PCI-1736UP, PCI-1739U,
 747           PCI-1750, PCI-1751, PCI-1752, PCI-1753/E, PCI-1754, PCI-1756,
 748           PCI-1760 and PCI-1762
 749
 750           To compile this driver as a module, choose M here: the module will be
 751           called adv_pci_dio.
 752
 753 config COMEDI_AMPLC_DIO200_PCI
 754         tristate "Amplicon PCI215/PCI272/PCIe215/PCIe236/PCIe296 DIO support"
 755         select COMEDI_AMPLC_DIO200
 756         ---help---
 757           Enable support for Amplicon PCI215, PCI272, PCIe215, PCIe236
 758           and PCIe296 DIO boards.
 759
 760           To compile this driver as a module, choose M here: the module will be
 761           called amplc_dio200_pci.
 762
 763 config COMEDI_AMPLC_PC236_PCI
 764         tristate "Amplicon PCI236 DIO board support"
 765         select COMEDI_AMPLC_PC236
 766         ---help---
 767           Enable support for Amplicon PCI236 DIO board.
 768
 769           To compile this driver as a module, choose M here: the module will be
 770           called amplc_pc236.
 771
 772 config COMEDI_AMPLC_PC263_PCI
 773         tristate "Amplicon PCI263 relay board support"
 774         ---help---
 775           Enable support for Amplicon PCI263 relay board.  This is a PCI board
 776           with 16 reed relay output channels.
 777
 778           To compile this driver as a module, choose M here: the module will be
 779           called amplc_pci263.
 780
 781 config COMEDI_AMPLC_PCI224
 782         tristate "Amplicon PCI224 and PCI234 support"
 783         select COMEDI_FC
 784         ---help---
 785           Enable support for Amplicon PCI224 and PCI234 AO boards
 786
 787           To compile this driver as a module, choose M here: the module will be
 788           called amplc_pci224.
 789
 790 config COMEDI_AMPLC_PCI230
 791         tristate "Amplicon PCI230 and PCI260 support"
 792         select COMEDI_8255
 793         ---help---
 794           Enable support for Amplicon PCI230 and PCI260 Multifunction I/O
 795           boards
 796
 797           To compile this driver as a module, choose M here: the module will be
 798           called amplc_pci230.
 799
 800 config COMEDI_CONTEC_PCI_DIO
 801         tristate "Contec PIO1616L digital I/O board support"
 802         ---help---
 803           Enable support for the Contec PIO1616L digital I/O board
 804
 805           To compile this driver as a module, choose M here: the module will be
 806           called contec_pci_dio.
 807
 808 config COMEDI_DAS08_PCI
 809         tristate "DAS-08 PCI support"
 810         select COMEDI_DAS08
 811         ---help---
 812           Enable support for PCI DAS-08 cards.
 813
 814           To compile this driver as a module, choose M here: the module will be
 815           called das08_pci.
 816
 817 config COMEDI_DT3000
 818         tristate "Data Translation DT3000 series support"
 819         ---help---
 820           Enable support for Data Translation DT3000 series
 821           DT3001, DT3001-PGL, DT3002, DT3003, DT3003-PGL, DT3004, DT3005 and
 822           DT3004-200
 823
 824           To compile this driver as a module, choose M here: the module will be
 825           called dt3000.
 826
 827 config COMEDI_DYNA_PCI10XX
 828         tristate "Dynalog PCI DAQ series support"
 829         ---help---
 830           Enable support for Dynalog PCI DAQ series
 831           PCI-1050
 832
 833           To compile this driver as a module, choose M here: the module will be
 834           called dyna_pci10xx.
 835
 836 config COMEDI_UNIOXX5
 837         tristate "Fastwel UNIOxx-5 analog and digital io board support"
 838         ---help---
 839           Enable support for Fastwel UNIOxx-5 (analog and digital i/o) boards
 840
 841           To compile this driver as a module, choose M here: the module will be
 842           called unioxx5.
 843
 844 config COMEDI_GSC_HPDI
 845         tristate "General Standards PCI-HPDI32 / PMC-HPDI32 support"
 846         select COMEDI_FC
 847         ---help---
 848           Enable support for General Standards Corporation high speed parallel
 849           digital interface rs485 boards PCI-HPDI32 and PMC-HPDI32.
 850           Only receive mode works, transmit not supported.
 851
 852           To compile this driver as a module, choose M here: the module will be
 853           called gsc_hpdi.
 854
 855 config COMEDI_ICP_MULTI
 856         tristate "Inova ICP_MULTI support"
 857         ---help---
 858           Enable support for Inova ICP_MULTI card
 859
 860           To compile this driver as a module, choose M here: the module will be
 861           called icp_multi.
 862
 863 config COMEDI_II_PCI20KC
 864         tristate "Intelligent Instruments PCI-20001C carrier support"
 865         ---help---
 866           Enable support for Intelligent Instruments PCI-20001C carrier
 867           PCI-20001, PCI-20006 and PCI-20341
 868
 869           To compile this driver as a module, choose M here: the module will be
 870           called ii_pci20kc.
 871
 872 config COMEDI_DAQBOARD2000
 873         tristate "IOtech DAQboard/2000 support"
 874         select COMEDI_8255
 875         ---help---
 876           Enable support for the IOtech DAQboard/2000
 877
 878           To compile this driver as a module, choose M here: the module will be
 879           called daqboard2000.
 880
 881 config COMEDI_JR3_PCI
 882         tristate "JR3/PCI force sensor board support"
 883         ---help---
 884           Enable support for JR3/PCI force sensor boards
 885
 886           To compile this driver as a module, choose M here: the module will be
 887           called jr3_pci.
 888
 889 config COMEDI_KE_COUNTER
 890         tristate "Kolter-Electronic PCI Counter 1 card support"
 891         ---help---
 892           Enable support for Kolter-Electronic PCI Counter 1 cards
 893
 894           To compile this driver as a module, choose M here: the module will be
 895           called ke_counter.
 896
 897 config COMEDI_CB_PCIDAS64
 898         tristate "MeasurementComputing PCI-DAS 64xx, 60xx, and 4020 support"
 899         select COMEDI_8255
 900         select COMEDI_FC
 901         ---help---
 902           Enable support for ComputerBoards/MeasurementComputing PCI-DAS 64xx,
 903           60xx, and 4020 series with the PLX 9080 PCI controller
 904
 905           To compile this driver as a module, choose M here: the module will be
 906           called cb_pcidas64.
 907
 908 config COMEDI_CB_PCIDAS
 909         tristate "MeasurementComputing PCI-DAS support"
 910         select COMEDI_8255
 911         select COMEDI_FC
 912         ---help---
 913           Enable support for ComputerBoards/MeasurementComputing PCI-DAS with
 914           AMCC S5933 PCIcontroller: PCI-DAS1602/16, PCI-DAS1602/16jr,
 915           PCI-DAS1602/12, PCI-DAS1200, PCI-DAS1200jr, PCI-DAS1000, PCI-DAS1001
 916           and PCI_DAS1002.
 917
 918           To compile this driver as a module, choose M here: the module will be
 919           called cb_pcidas.
 920
 921 config COMEDI_CB_PCIDDA
 922         tristate "MeasurementComputing PCI-DDA series support"
 923         select COMEDI_8255
 924         ---help---
 925           Enable support for ComputerBoards/MeasurementComputing PCI-DDA
 926           series: PCI-DDA08/12, PCI-DDA04/12, PCI-DDA02/12, PCI-DDA08/16,
 927           PCI-DDA04/16 and PCI-DDA02/16
 928
 929           To compile this driver as a module, choose M here: the module will be
 930           called cb_pcidda.
 931
 932 config COMEDI_CB_PCIMDAS
 933         tristate "MeasurementComputing PCIM-DAS1602/16 support"
 934         select COMEDI_8255
 935         ---help---
 936           Enable support for ComputerBoards/MeasurementComputing PCI Migration
 937           series PCIM-DAS1602/16
 938
 939           To compile this driver as a module, choose M here: the module will be
 940           called cb_pcimdas.
 941
 942 config COMEDI_CB_PCIMDDA
 943         tristate "MeasurementComputing PCIM-DDA06-16 support"
 944         select COMEDI_8255
 945         ---help---
 946           Enable support for ComputerBoards/MeasurementComputing PCIM-DDA06-16
 947
 948           To compile this driver as a module, choose M here: the module will be
 949           called cb_pcimdda.
 950
 951 config COMEDI_ME4000
 952         tristate "Meilhaus ME-4000 support"
 953         ---help---
 954           Enable support for Meilhaus PCI data acquisition cards
 955           ME-4650, ME-4670i, ME-4680, ME-4680i and ME-4680is
 956
 957           To compile this driver as a module, choose M here: the module will be
 958           called me4000.
 959
 960 config COMEDI_ME_DAQ
 961         tristate "Meilhaus ME-2000i, ME-2600i, ME-3000vm1 support"
 962         ---help---
 963           Enable support for Meilhaus PCI data acquisition cards
 964           ME-2000i, ME-2600i and ME-3000vm1
 965
 966           To compile this driver as a module, choose M here: the module will be
 967           called me_daq.
 968
 969 config COMEDI_NI_6527
 970         tristate "NI 6527 support"
 971         select COMEDI_MITE
 972         ---help---
 973           Enable support for the National Instruments 6527 PCI card
 974
 975           To compile this driver as a module, choose M here: the module will be
 976           called ni_6527.
 977
 978 config COMEDI_NI_65XX
 979         tristate "NI 65xx static dio PCI card support"
 980         select COMEDI_MITE
 981         ---help---
 982           Enable support for National Instruments 65xx static dio boards.
 983           Supported devices: National Instruments PCI-6509 (ni_65xx),
 984           PXI-6509, PCI-6510, PCI-6511, PXI-6511, PCI-6512, PXI-6512, PCI-6513,
 985           PXI-6513, PCI-6514, PXI-6514, PCI-6515, PXI-6515, PCI-6516, PCI-6517,
 986           PCI-6518, PCI-6519, PCI-6520, PCI-6521, PXI-6521, PCI-6528, PXI-6528
 987
 988           To compile this driver as a module, choose M here: the module will be
 989           called ni_65xx.
 990
 991 config COMEDI_NI_660X
 992         tristate "NI 660x counter/timer PCI card support"
 993         select COMEDI_NI_TIOCMD
 994         ---help---
 995           Enable support for National Instruments PCI-6601 (ni_660x), PCI-6602,
 996           PXI-6602, PXI-6608 and PXI-6624.
 997
 998           To compile this driver as a module, choose M here: the module will be
 999           called ni_660x.
1000
1001 config COMEDI_NI_670X
1002         tristate "NI 670x PCI card support"
1003         select COMEDI_MITE
1004         ---help---
1005           Enable support for National Instruments PCI-6703 and PCI-6704
1006
1007           To compile this driver as a module, choose M here: the module will be
1008           called ni_670x.
1009
1010 config COMEDI_NI_LABPC
1011         tristate "NI Lab-PC and compatibles ISA and PCI support"
1012         select COMEDI_MITE
1013         select COMEDI_8255
1014         select COMEDI_FC
1015         depends on VIRT_TO_BUS
1016         ---help---
1017           Enable support for National Instruments Lab-PC and compatibles
1018           Lab-PC-1200, Lab-PC-1200AI, Lab-PC+ and PCI-1200.
1019           Kernel-level ISA plug-and-play support for the lab-pc-1200 boards has
1020           not yet been added to the driver.
1021
1022           To compile this driver as a module, choose M here: the module will be
1023           called ni_labpc.
1024
1025 config COMEDI_NI_PCIDIO
1026         tristate "NI PCI-DIO32HS, PCI-6533, PCI-6534 support"
1027         select COMEDI_MITE
1028         select COMEDI_8255
1029         ---help---
1030           Enable support for National Instruments PCI-DIO-32HS, PXI-6533,
1031           PCI-6533 and PCI-6534
1032
1033           To compile this driver as a module, choose M here: the module will be
1034           called ni_pcidio.
1035
1036 config COMEDI_NI_PCIMIO
1037         tristate "NI PCI-MIO-E series and M series support"
1038         select COMEDI_NI_TIOCMD
1039         select COMEDI_8255
1040         select COMEDI_FC
1041         ---help---
1042           Enable support for National Instruments PCI-MIO-E series and M series
1043           (all boards): PCI-MIO-16XE-10, PXI-6030E, PCI-MIO-16E-1,
1044           PCI-MIO-16E-4, PCI-6014, PCI-6040E, PXI-6040E, PCI-6030E, PCI-6031E,
1045           PCI-6032E, PCI-6033E, PCI-6071E, PCI-6023E, PCI-6024E, PCI-6025E,
1046           PXI-6025E, PCI-6034E, PCI-6035E, PCI-6052E, PCI-6110, PCI-6111,
1047           PCI-6220, PCI-6221, PCI-6224, PXI-6224, PCI-6225, PXI-6225, PCI-6229,
1048           PCI-6250, PCI-6251, PCIe-6251, PCI-6254, PCI-6259, PCIe-6259,
1049           PCI-6280, PCI-6281, PXI-6281, PCI-6284, PCI-6289, PCI-6711, PXI-6711,
1050           PCI-6713, PXI-6713, PXI-6071E, PCI-6070E, PXI-6070E, PXI-6052E,
1051           PCI-6036E, PCI-6731, PCI-6733, PXI-6733, PCI-6143, PXI-6143
1052
1053           To compile this driver as a module, choose M here: the module will be
1054           called ni_pcimio.
1055
1056 config COMEDI_RTD520
1057         tristate "Real Time Devices PCI4520/DM7520 support"
1058         ---help---
1059           Enable support for Real Time Devices PCI4520/DM7520
1060
1061           To compile this driver as a module, choose M here: the module will be
1062           called rtd520.
1063
1064 config COMEDI_S526
1065         tristate "Sensoray s526 support"
1066         ---help---
1067           Enable support for Sensoray s526
1068
1069           To compile this driver as a module, choose M here: the module will be
1070           called s526.
1071
1072 config COMEDI_S626
1073         tristate "Sensoray 626 support"
1074         select COMEDI_FC
1075         ---help---
1076           Enable support for Sensoray 626
1077
1078           To compile this driver as a module, choose M here: the module will be
1079           called s626.
1080
1081 config COMEDI_SSV_DNP
1082         tristate "SSV Embedded Systems DIL/Net-PC support"
1083         ---help---
1084           Enable support for SSV Embedded Systems DIL/Net-PC
1085
1086           To compile this driver as a module, choose M here: the module will be
1087           called ssv_dnp.
1088
1089 config COMEDI_MITE
1090         tristate
1091
1092 config COMEDI_NI_TIOCMD
1093         tristate
1094         select COMEDI_NI_TIO
1095         select COMEDI_MITE
1096
1097 endif # COMEDI_PCI_DRIVERS
1098
1099 menuconfig COMEDI_PCMCIA_DRIVERS
1100         bool "Comedi PCMCIA drivers"
1101         depends on PCMCIA
1102         ---help---
1103           Enable support for comedi PCMCIA drivers.
1104
1105 if COMEDI_PCMCIA_DRIVERS
1106
1107 config COMEDI_CB_DAS16_CS
1108         tristate "CB DAS16 series PCMCIA support"
1109         ---help---
1110           Enable support for the ComputerBoards/MeasurementComputing PCMCIA
1111           cards DAS16/16, PCM-DAS16D/12 and PCM-DAS16s/16
1112
1113           To compile this driver as a module, choose M here: the module will be
1114           called cb_das16_cs.
1115
1116 config COMEDI_DAS08_CS
1117         tristate "CB DAS08 PCMCIA support"
1118         select COMEDI_DAS08
1119         ---help---
1120           Enable support for the ComputerBoards/MeasurementComputing DAS-08
1121           PCMCIA card
1122
1123           To compile this driver as a module, choose M here: the module will be
1124           called das08_cs.
1125
1126 config COMEDI_NI_DAQ_700_CS
1127         tristate "NI DAQCard-700 PCMCIA support"
1128         ---help---
1129           Enable support for the National Instruments PCMCIA DAQCard-700 DIO
1130
1131           To compile this driver as a module, choose M here: the module will be
1132           called ni_daq_700.
1133
1134 config COMEDI_NI_DAQ_DIO24_CS
1135         tristate "NI DAQ-Card DIO-24 PCMCIA support"
1136         select COMEDI_8255
1137         ---help---
1138           Enable support for the National Instruments PCMCIA DAQ-Card DIO-24
1139
1140           To compile this driver as a module, choose M here: the module will be
1141           called ni_daq_dio24.
1142
1143 config COMEDI_NI_LABPC_CS
1144         tristate "NI DAQCard-1200 PCMCIA support"
1145         depends on COMEDI_NI_LABPC
1146         ---help---
1147           Enable support for the National Instruments PCMCIA DAQCard-1200
1148
1149           To compile this driver as a module, choose M here: the module will be
1150           called ni_labpc_cs.
1151
1152 config COMEDI_NI_MIO_CS
1153         tristate "NI DAQCard E series PCMCIA support"
1154         select COMEDI_NI_TIO
1155         select COMEDI_8255
1156         select COMEDI_FC
1157         ---help---
1158           Enable support for the National Instruments PCMCIA DAQCard E series
1159           DAQCard-ai-16xe-50, DAQCard-ai-16e-4, DAQCard-6062E, DAQCard-6024E
1160           and DAQCard-6036E
1161
1162           To compile this driver as a module, choose M here: the module will be
1163           called ni_mio_cs.
1164
1165 config COMEDI_QUATECH_DAQP_CS
1166         tristate "Quatech DAQP PCMCIA data capture card support"
1167         ---help---
1168           Enable support for the Quatech DAQP PCMCIA data capture cards
1169           DAQP-208 and DAQP-308
1170
1171           To compile this driver as a module, choose M here: the module will be
1172           called quatech_daqp_cs.
1173
1174 endif # COMEDI_PCMCIA_DRIVERS
1175
1176 menuconfig COMEDI_USB_DRIVERS
1177         bool "Comedi USB drivers"
1178         depends on USB
1179         ---help---
1180           Enable support for comedi USB drivers.
1181
1182 if COMEDI_USB_DRIVERS
1183
1184 config COMEDI_DT9812
1185         tristate "DataTranslation DT9812 USB module support"
1186         ---help---
1187           Enable support for the Data Translation DT9812 USB module
1188
1189           To compile this driver as a module, choose M here: the module will be
1190           called dt9812.
1191
1192 config COMEDI_USBDUX
1193         tristate "ITL USB-DUX-D support"
1194         ---help---
1195           Enable support for the Incite Technology Ltd USB-DUX-D Board
1196
1197           To compile this driver as a module, choose M here: the module will be
1198           called usbdux.
1199
1200 config COMEDI_USBDUXFAST
1201         tristate "ITL USB-DUXfast support"
1202         select COMEDI_FC
1203         ---help---
1204           Enable support for the Incite Technology Ltd USB-DUXfast Board
1205
1206           To compile this driver as a module, choose M here: the module will be
1207           called usbduxfast.
1208
1209 config COMEDI_USBDUXSIGMA
1210         tristate "ITL USB-DUXsigma support"
1211         select COMEDI_FC
1212         ---help---
1213           Enable support for the Incite Technology Ltd USB-DUXsigma Board
1214
1215           To compile this driver as a module, choose M here: the module will be
1216           called usbduxsigma.
1217
1218 config COMEDI_VMK80XX
1219         tristate "Velleman VM110/VM140 USB Board support"
1220         ---help---
1221           Build the Velleman USB Board Low-Level Driver supporting the
1222           K8055/K8061 aka VM110/VM140 devices
1223
1224           To compile this driver as a module, choose M here: the module will be
1225           called vmk80xx.
1226
1227 endif # COMEDI_USB_DRIVERS
1228
1229 config COMEDI_8255
1230         tristate "Generic 8255 support"
1231         ---help---
1232           Enable generic 8255 support.
1233
1234           You should enable compilation this driver if you plan to use a board
1235           that has an 8255 chip. For multifunction boards, the main driver will
1236           configure the 8255 subdevice automatically.
1237
1238           Note that most PCI based 8255 boards use the 8255_pci driver as a
1239           wrapper around this driver.
1240
1241           To compile this driver as a module, choose M here: the module will be
1242           called 8255.
1243
1244 config COMEDI_FC
1245         tristate
1246
1247 config COMEDI_AMPLC_DIO200
1248         tristate
1249
1250 config COMEDI_AMPLC_PC236
1251         tristate
1252         select COMEDI_8255
1253
1254 config COMEDI_DAS08
1255         tristate
1256         select COMEDI_8255
1257
1258 config COMEDI_NI_TIO
1259         tristate
1260
1261 endif # COMEDI