drivers/staging/fwserial/fwserial.h

   1 #ifndef _FIREWIRE_FWSERIAL_H
   2 #define _FIREWIRE_FWSERIAL_H
   3
   4 #include <linux/kernel.h>
   5 #include <linux/tty.h>
   6 #include <linux/tty_driver.h>
   7 #include <linux/tty_flip.h>
   8 #include <linux/list.h>
   9 #include <linux/firewire.h>
  10 #include <linux/firewire-constants.h>
  11 #include <linux/spinlock.h>
  12 #include <linux/rcupdate.h>
  13 #include <linux/mutex.h>
  14 #include <linux/serial.h>
  15 #include <linux/serial_reg.h>
  16 #include <linux/module.h>
  17 #include <linux/seq_file.h>
  18 #include <linux/debugfs.h>
  19
  20 #include "dma_fifo.h"
  21
  22 #ifdef FWTTY_PROFILING
  23 #define DISTRIBUTION_MAX_SIZE     8192
  24 #define DISTRIBUTION_MAX_INDEX    (ilog2(DISTRIBUTION_MAX_SIZE) + 1)
  25 static inline void profile_size_distrib(unsigned stat[], unsigned val)
  26 {
  27         int n = (val) ? min(ilog2(val) + 1, DISTRIBUTION_MAX_INDEX) : 0;
  28         ++stat[n];
  29 }
  30 #else
  31 #define DISTRIBUTION_MAX_INDEX    0
  32 #define profile_size_distrib(st, n)
  33 #endif
  34
  35 /* Parameters for both VIRT_CABLE_PLUG & VIRT_CABLE_PLUG_RSP mgmt codes */
  36 struct virt_plug_params {
  37         __be32  status_hi;
  38         __be32  status_lo;
  39         __be32  fifo_hi;
  40         __be32  fifo_lo;
  41         __be32  fifo_len;
  42 };
  43
  44 struct peer_work_params {
  45         union {
  46                 struct virt_plug_params plug_req;
  47         };
  48 };
  49
  50 /**
  51  * fwtty_peer: structure representing local & remote unit devices
  52  * @unit: unit child device of fw_device node
  53  * @serial: back pointer to associated fw_serial aggregate
  54  * @guid: unique 64-bit guid for this unit device
  55  * @generation: most recent bus generation
  56  * @node_id: most recent node_id
  57  * @speed: link speed of peer (0 = S100, 2 = S400, ... 5 = S3200)
  58  * @mgmt_addr: bus addr region to write mgmt packets to
  59  * @status_addr: bus addr register to write line status to
  60  * @fifo_addr: bus addr region to write serial output to
  61  * @fifo_len:  max length for single write to fifo_addr
  62  * @list: link for insertion into fw_serial's peer_list
  63  * @rcu: for deferring peer reclamation
  64  * @lock: spinlock to synchonize changes to state & port fields
  65  * @work: only one work item can be queued at any one time
  66  *        Note: pending work is canceled prior to removal, so this
  67  *        peer is valid for at least the lifetime of the work function
  68  * @work_params: parameter block for work functions
  69  * @timer: timer for resetting peer state if remote request times out
  70  * @state: current state
  71  * @connect: work item for auto-connecting
  72  * @connect_retries: # of connections already attempted
  73  * @port: associated tty_port (usable if state == FWSC_ATTACHED)
  74  */
  75 struct fwtty_peer {
  76         struct fw_unit          *unit;
  77         struct fw_serial        *serial;
  78         u64                     guid;
  79         int                     generation;
  80         int                     node_id;
  81         unsigned                speed;
  82         int                     max_payload;
  83         u64                     mgmt_addr;
  84
  85         /* these are usable only if state == FWSC_ATTACHED */
  86         u64                     status_addr;
  87         u64                     fifo_addr;
  88         int                     fifo_len;
  89
  90         struct list_head        list;
  91         struct rcu_head         rcu;
  92
  93         spinlock_t              lock;
  94         struct work_struct      work;
  95         struct peer_work_params work_params;
  96         struct timer_list       timer;
  97         int                     state;
  98         struct delayed_work     connect;
  99         int                     connect_retries;
 100
 101         struct fwtty_port       *port;
 102 };
 103
 104 #define to_peer(ptr, field)     (container_of(ptr, struct fwtty_peer, field))
 105
 106 /* state values for fwtty_peer.state field */
 107 enum fwtty_peer_state {
 108         FWPS_GONE,
 109         FWPS_NOT_ATTACHED,
 110         FWPS_ATTACHED,
 111         FWPS_PLUG_PENDING,
 112         FWPS_PLUG_RESPONDING,
 113         FWPS_UNPLUG_PENDING,
 114         FWPS_UNPLUG_RESPONDING,
 115
 116         FWPS_NO_MGMT_ADDR = -1,
 117 };
 118
 119 #define CONNECT_RETRY_DELAY     HZ
 120 #define MAX_CONNECT_RETRIES     10
 121
 122 /* must be holding peer lock for these state funclets */
 123 static inline void peer_set_state(struct fwtty_peer *peer, int new)
 124 {
 125         peer->state = new;
 126 }
 127
 128 static inline struct fwtty_port *peer_revert_state(struct fwtty_peer *peer)
 129 {
 130         struct fwtty_port *port = peer->port;
 131
 132         peer->port = NULL;
 133         peer_set_state(peer, FWPS_NOT_ATTACHED);
 134         return port;
 135 }
 136
 137 struct fwserial_mgmt_pkt {
 138         struct {
 139                 __be16          len;
 140                 __be16          code;
 141         } hdr;
 142         union {
 143                 struct virt_plug_params plug_req;
 144                 struct virt_plug_params plug_rsp;
 145         };
 146 } __packed;
 147
 148 /* fwserial_mgmt_packet codes */
 149 #define FWSC_RSP_OK                     0x0000
 150 #define FWSC_RSP_NACK                   0x8000
 151 #define FWSC_CODE_MASK                  0x0fff
 152
 153 #define FWSC_VIRT_CABLE_PLUG            1
 154 #define FWSC_VIRT_CABLE_UNPLUG          2
 155 #define FWSC_VIRT_CABLE_PLUG_RSP        3
 156 #define FWSC_VIRT_CABLE_UNPLUG_RSP      4
 157
 158 /* 1 min. plug timeout -- suitable for userland authorization */
 159 #define VIRT_CABLE_PLUG_TIMEOUT         (60 * HZ)
 160
 161 struct stats {
 162         unsigned        xchars;
 163         unsigned        dropped;
 164         unsigned        tx_stall;
 165         unsigned        fifo_errs;
 166         unsigned        sent;
 167         unsigned        lost;
 168         unsigned        throttled;
 169         unsigned        watermark;
 170         unsigned        reads[DISTRIBUTION_MAX_INDEX + 1];
 171         unsigned        writes[DISTRIBUTION_MAX_INDEX + 1];
 172         unsigned        txns[DISTRIBUTION_MAX_INDEX + 1];
 173         unsigned        unthrottle[DISTRIBUTION_MAX_INDEX + 1];
 174 };
 175
 176 struct fwconsole_ops {
 177         void (*notify)(int code, void *data);
 178         void (*stats)(struct stats *stats, void *data);
 179         void (*proc_show)(struct seq_file *m, void *data);
 180 };
 181
 182 /* codes for console ops notify */
 183 #define FWCON_NOTIFY_ATTACH             1
 184 #define FWCON_NOTIFY_DETACH             2
 185
 186 struct buffered_rx {
 187         struct list_head        list;
 188         size_t                  n;
 189         unsigned char           data[0];
 190 };
 191
 192 /**
 193  * fwtty_port: structure used to track/represent underlying tty_port
 194  * @port: underlying tty_port
 195  * @device: tty device
 196  * @index: index into port_table for this particular port
 197  *    note: minor = index + minor_start assigned by tty_alloc_driver()
 198  * @serial: back pointer to the containing fw_serial
 199  * @rx_handler: bus address handler for unique addr region used by remotes
 200  *              to communicate with this port. Every port uses
 201  *              fwtty_port_handler() for per port transactions.
 202  * @fwcon_ops: ops for attached fw_console (if any)
 203  * @con_data: private data for fw_console
 204  * @wait_tx: waitqueue for sleeping until writer/drain completes tx
 205  * @emit_breaks: delayed work responsible for generating breaks when the
 206  *               break line status is active
 207  * @cps : characters per second computed from the termios settings
 208  * @break_last: timestamp in jiffies from last emit_breaks
 209  * @hangup: work responsible for HUPing when carrier is dropped/lost
 210  * @mstatus: loose virtualization of LSR/MSR
 211  *         bits 15..0  correspond to TIOCM_* bits
 212  *         bits 19..16 reserved for mctrl
 213  *         bit 20      OOB_TX_THROTTLE
 214  *         bits 23..21 reserved
 215  *         bits 31..24 correspond to UART_LSR_* bits
 216  * @lock: spinlock for protecting concurrent access to fields below it
 217  * @mctrl: loose virtualization of MCR
 218  *         bits 15..0  correspond to TIOCM_* bits
 219  *         bit 16      OOB_RX_THROTTLE
 220  *         bits 19..17 reserved
 221  *         bits 31..20 reserved for mstatus
 222  * @drain: delayed work scheduled to ensure that writes are flushed.
 223  *         The work can race with the writer but concurrent sending is
 224  *         prevented with the IN_TX flag. Scheduled under lock to
 225  *         limit scheduling when fifo has just been drained.
 226  * @push: work responsible for pushing buffered rx to the ldisc.
 227  *        rx can become buffered if the tty buffer is filled before the
 228  *        ldisc throttles the sender.
 229  * @buf_list: list of buffered rx yet to be sent to ldisc
 230  * @buffered: byte count of buffered rx
 231  * @tx_fifo: fifo used to store & block-up writes for dma to remote
 232  * @max_payload: max bytes transmissable per dma (based on peer's max_payload)
 233  * @status_mask: UART_LSR_* bitmask significant to rx (based on termios)
 234  * @ignore_mask: UART_LSR_* bitmask of states to ignore (also based on termios)
 235  * @break_ctl: if set, port is 'sending break' to remote
 236  * @write_only: self-explanatory
 237  * @overrun: previous rx was lost (partially or completely)
 238  * @loopback: if set, port is in loopback mode
 239  * @flags: atomic bit flags
 240  *         bit 0: IN_TX - gate to allow only one cpu to send from the dma fifo
 241  *                        at a time.
 242  *         bit 1: STOP_TX - force tx to exit while sending
 243  * @peer: rcu-pointer to associated fwtty_peer (if attached)
 244  *        NULL if no peer attached
 245  * @icount: predefined statistics reported by the TIOCGICOUNT ioctl
 246  * @stats: additional statistics reported in /proc/tty/driver/firewire_serial
 247  */
 248 struct fwtty_port {
 249         struct tty_port            port;
 250         struct device              *device;
 251         unsigned                   index;
 252         struct fw_serial           *serial;
 253         struct fw_address_handler  rx_handler;
 254
 255         struct fwconsole_ops       *fwcon_ops;
 256         void                       *con_data;
 257
 258         wait_queue_head_t          wait_tx;
 259         struct delayed_work        emit_breaks;
 260         unsigned                   cps;
 261         unsigned long              break_last;
 262
 263         struct work_struct         hangup;
 264
 265         unsigned                   mstatus;
 266
 267         spinlock_t                 lock;
 268         unsigned                   mctrl;
 269         struct delayed_work        drain;
 270         struct work_struct         push;
 271         struct list_head           buf_list;
 272         int                        buffered;
 273         struct dma_fifo            tx_fifo;
 274         int                        max_payload;
 275         unsigned                   status_mask;
 276         unsigned                   ignore_mask;
 277         unsigned                   break_ctl:1,
 278                                    write_only:1,
 279                                    overrun:1,
 280                                    loopback:1;
 281         unsigned long              flags;
 282
 283         struct fwtty_peer __rcu    *peer;
 284
 285         struct async_icount        icount;
 286         struct stats               stats;
 287 };
 288
 289 #define to_port(ptr, field)     (container_of(ptr, struct fwtty_port, field))
 290
 291 /* bit #s for flags field */
 292 #define IN_TX                      0
 293 #define STOP_TX                    1
 294 #define BUFFERING_RX               2
 295
 296 /* bitmasks for special mctrl/mstatus bits */
 297 #define OOB_RX_THROTTLE   0x00010000
 298 #define MCTRL_RSRVD       0x000e0000
 299 #define OOB_TX_THROTTLE   0x00100000
 300 #define MSTATUS_RSRVD     0x00e00000
 301
 302 #define MCTRL_MASK        (TIOCM_DTR | TIOCM_RTS | TIOCM_OUT1 | TIOCM_OUT2 | \
 303                            TIOCM_LOOP | OOB_RX_THROTTLE | MCTRL_RSRVD)
 304
 305 /* XXX even every 1/50th secs. may be unnecessarily accurate */
 306 /* delay in jiffies between brk emits */
 307 #define FREQ_BREAKS        (HZ / 50)
 308
 309 /* Ports are allocated in blocks of num_ports for each fw_card */
 310 #define MAX_CARD_PORTS           32     /* max # of ports per card */
 311 #define MAX_TOTAL_PORTS          64     /* max # of ports total    */
 312
 313 /* tuning parameters */
 314 #define FWTTY_PORT_TXFIFO_LEN   4096
 315 #define FWTTY_PORT_MAX_PEND_DMA    8    /* costs a cache line per pend */
 316 #define DRAIN_THRESHOLD         1024
 317 #define MAX_ASYNC_PAYLOAD       4096    /* ohci-defined limit          */
 318 #define WRITER_MINIMUM           128
 319 /* TODO: how to set watermark to AR context size? see fwtty_rx() */
 320 #define HIGH_WATERMARK         32768    /* AR context is 32K           */
 321
 322 /*
 323  * Size of bus addr region above 4GB used per port as the recv addr
 324  * - must be at least as big as the MAX_ASYNC_PAYLOAD
 325  */
 326 #define FWTTY_PORT_RXFIFO_LEN   MAX_ASYNC_PAYLOAD
 327
 328 /**
 329  * fw_serial: aggregate used to associate tty ports with specific fw_card
 330  * @card: fw_card associated with this fw_serial device (1:1 association)
 331  * @kref: reference-counted multi-port management allows delayed destroy
 332  * @self: local unit device as 'peer'. Not valid until local unit device
 333  *         is enumerated.
 334  * @list: link for insertion into fwserial_list
 335  * @peer_list: list of local & remote unit devices attached to this card
 336  * @ports: fixed array of tty_ports provided by this serial device
 337  */
 338 struct fw_serial {
 339         struct fw_card    *card;
 340         struct kref       kref;
 341
 342         struct dentry     *debugfs;
 343         struct fwtty_peer *self;
 344
 345         struct list_head  list;
 346         struct list_head  peer_list;
 347
 348         struct fwtty_port *ports[MAX_CARD_PORTS];
 349 };
 350
 351 #define to_serial(ptr, field)   (container_of(ptr, struct fw_serial, field))
 352
 353 #define TTY_DEV_NAME                "fwtty"     /* ttyFW was taken           */
 354 static const char tty_dev_name[] =  TTY_DEV_NAME;
 355 static const char loop_dev_name[] = "fwloop";
 356
 357 extern struct tty_driver *fwtty_driver;
 358
 359 #define driver_err(s, v...)     pr_err(KBUILD_MODNAME ": " s, ##v)
 360
 361 struct fwtty_port *fwtty_port_get(unsigned index);
 362 void fwtty_port_put(struct fwtty_port *port);
 363
 364 static inline void fwtty_bind_console(struct fwtty_port *port,
 365                                       struct fwconsole_ops *fwcon_ops,
 366                                       void *data)
 367 {
 368         port->con_data = data;
 369         port->fwcon_ops = fwcon_ops;
 370 }
 371
 372 /*
 373  * Returns the max send async payload size in bytes based on the unit device
 374  * link speed. Self-limiting asynchronous bandwidth (via reducing the payload)
 375  * is not necessary and does not work, because
 376  *   1) asynchronous traffic will absorb all available bandwidth (less that
 377  *      being used for isochronous traffic)
 378  *   2) isochronous arbitration always wins.
 379  */
 380 static inline int link_speed_to_max_payload(unsigned speed)
 381 {
 382         /* Max async payload is 4096 - see IEEE 1394-2008 tables 6-4, 16-18 */
 383         return min(512 << speed, 4096);
 384 }
 385
 386 #endif /* _FIREWIRE_FWSERIAL_H */