4 * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License version 2 only,
8 * as published by the Free Software Foundation.
10 * This program is distributed in the hope that it will be useful, but
11 * WITHOUT ANY WARRANTY; without even the implied warranty of
12 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
13 * General Public License version 2 for more details (a copy is included
14 * in the LICENSE file that accompanied this code).
16 * You should have received a copy of the GNU General Public License
17 * version 2 along with this program; If not, see
18 * http://www.sun.com/software/products/lustre/docs/GPLv2.pdf
20 * Please contact Sun Microsystems, Inc., 4150 Network Circle, Santa Clara,
21 * CA 95054 USA or visit www.sun.com if you need additional information or
27 * Copyright (c) 2007, 2010, Oracle and/or its affiliates. All rights reserved.
28 * Use is subject to license terms.
30 * Copyright (c) 2011, 2012, Intel Corporation.
33 * This file is part of Lustre, http://www.lustre.org/
34 * Lustre is a trademark of Sun Microsystems, Inc.
37 #ifndef __LUSTRE_LU_OBJECT_H
38 #define __LUSTRE_LU_OBJECT_H
41 #include "../../include/linux/libcfs/libcfs.h"
42 #include "lustre/lustre_idl.h"
46 struct proc_dir_entry
;
51 * lu_* data-types represent server-side entities shared by data and meta-data
56 * -# support for layering.
58 * Server side object is split into layers, one per device in the
59 * corresponding device stack. Individual layer is represented by struct
60 * lu_object. Compound layered object --- by struct lu_object_header. Most
61 * interface functions take lu_object as an argument and operate on the
62 * whole compound object. This decision was made due to the following
65 * - it's envisaged that lu_object will be used much more often than
68 * - we want lower (non-top) layers to be able to initiate operations
69 * on the whole object.
71 * Generic code supports layering more complex than simple stacking, e.g.,
72 * it is possible that at some layer object "spawns" multiple sub-objects
75 * -# fid-based identification.
77 * Compound object is uniquely identified by its fid. Objects are indexed
78 * by their fids (hash table is used for index).
80 * -# caching and life-cycle management.
82 * Object's life-time is controlled by reference counting. When reference
83 * count drops to 0, object is returned to cache. Cached objects still
84 * retain their identity (i.e., fid), and can be recovered from cache.
86 * Objects are kept in the global LRU list, and lu_site_purge() function
87 * can be used to reclaim given number of unused objects from the tail of
90 * -# avoiding recursion.
92 * Generic code tries to replace recursion through layers by iterations
93 * where possible. Additionally to the end of reducing stack consumption,
94 * data, when practically possible, are allocated through lu_context_key
95 * interface rather than on stack.
102 struct lu_object_header
;
107 * Operations common for data and meta-data devices.
109 struct lu_device_operations
{
111 * Allocate object for the given device (without lower-layer
112 * parts). This is called by lu_object_operations::loo_object_init()
113 * from the parent layer, and should setup at least lu_object::lo_dev
114 * and lu_object::lo_ops fields of resulting lu_object.
116 * Object creation protocol.
118 * Due to design goal of avoiding recursion, object creation (see
119 * lu_object_alloc()) is somewhat involved:
121 * - first, lu_device_operations::ldo_object_alloc() method of the
122 * top-level device in the stack is called. It should allocate top
123 * level object (including lu_object_header), but without any
124 * lower-layer sub-object(s).
126 * - then lu_object_alloc() sets fid in the header of newly created
129 * - then lu_object_operations::loo_object_init() is called. It has
130 * to allocate lower-layer object(s). To do this,
131 * lu_object_operations::loo_object_init() calls ldo_object_alloc()
132 * of the lower-layer device(s).
134 * - for all new objects allocated by
135 * lu_object_operations::loo_object_init() (and inserted into object
136 * stack), lu_object_operations::loo_object_init() is called again
137 * repeatedly, until no new objects are created.
139 * \post ergo(!IS_ERR(result), result->lo_dev == d &&
140 * result->lo_ops != NULL);
142 struct lu_object
*(*ldo_object_alloc
)(const struct lu_env
*env
,
143 const struct lu_object_header
*h
,
144 struct lu_device
*d
);
146 * process config specific for device.
148 int (*ldo_process_config
)(const struct lu_env
*env
,
149 struct lu_device
*, struct lustre_cfg
*);
150 int (*ldo_recovery_complete
)(const struct lu_env
*,
154 * initialize local objects for device. this method called after layer has
155 * been initialized (after LCFG_SETUP stage) and before it starts serving
159 int (*ldo_prepare
)(const struct lu_env
*,
160 struct lu_device
*parent
,
161 struct lu_device
*dev
);
166 * For lu_object_conf flags
169 /* This is a new object to be allocated, or the file
170 * corresponding to the object does not exists. */
171 LOC_F_NEW
= 0x00000001,
175 * Object configuration, describing particulars of object being created. On
176 * server this is not used, as server objects are full identified by fid. On
177 * client configuration contains struct lustre_md.
179 struct lu_object_conf
{
181 * Some hints for obj find and alloc.
183 loc_flags_t loc_flags
;
187 * Type of "printer" function used by lu_object_operations::loo_object_print()
190 * Printer function is needed to provide some flexibility in (semi-)debugging
191 * output: possible implementations: printk, CDEBUG, sysfs/seq_file
193 typedef int (*lu_printer_t
)(const struct lu_env
*env
,
194 void *cookie
, const char *format
, ...)
195 __attribute__ ((format (printf
, 3, 4)));
198 * Operations specific for particular lu_object.
200 struct lu_object_operations
{
203 * Allocate lower-layer parts of the object by calling
204 * lu_device_operations::ldo_object_alloc() of the corresponding
207 * This method is called once for each object inserted into object
208 * stack. It's responsibility of this method to insert lower-layer
209 * object(s) it create into appropriate places of object stack.
211 int (*loo_object_init
)(const struct lu_env
*env
,
213 const struct lu_object_conf
*conf
);
215 * Called (in top-to-bottom order) during object allocation after all
216 * layers were allocated and initialized. Can be used to perform
217 * initialization depending on lower layers.
219 int (*loo_object_start
)(const struct lu_env
*env
,
220 struct lu_object
*o
);
222 * Called before lu_object_operations::loo_object_free() to signal
223 * that object is being destroyed. Dual to
224 * lu_object_operations::loo_object_init().
226 void (*loo_object_delete
)(const struct lu_env
*env
,
227 struct lu_object
*o
);
229 * Dual to lu_device_operations::ldo_object_alloc(). Called when
230 * object is removed from memory.
232 void (*loo_object_free
)(const struct lu_env
*env
,
233 struct lu_object
*o
);
235 * Called when last active reference to the object is released (and
236 * object returns to the cache). This method is optional.
238 void (*loo_object_release
)(const struct lu_env
*env
,
239 struct lu_object
*o
);
241 * Optional debugging helper. Print given object.
243 int (*loo_object_print
)(const struct lu_env
*env
, void *cookie
,
244 lu_printer_t p
, const struct lu_object
*o
);
246 * Optional debugging method. Returns true iff method is internally
249 int (*loo_object_invariant
)(const struct lu_object
*o
);
255 struct lu_device_type
;
258 * Device: a layer in the server side abstraction stacking.
262 * reference count. This is incremented, in particular, on each object
263 * created at this layer.
265 * \todo XXX which means that atomic_t is probably too small.
269 * Pointer to device type. Never modified once set.
271 struct lu_device_type
*ld_type
;
273 * Operation vector for this device.
275 const struct lu_device_operations
*ld_ops
;
277 * Stack this device belongs to.
279 struct lu_site
*ld_site
;
280 struct proc_dir_entry
*ld_proc_entry
;
282 /** \todo XXX: temporary back pointer into obd. */
283 struct obd_device
*ld_obd
;
285 * A list of references to this object, for debugging.
287 struct lu_ref ld_reference
;
289 * Link the device to the site.
291 struct list_head ld_linkage
;
294 struct lu_device_type_operations
;
297 * Tag bits for device type. They are used to distinguish certain groups of
301 /** this is meta-data device */
302 LU_DEVICE_MD
= (1 << 0),
303 /** this is data device */
304 LU_DEVICE_DT
= (1 << 1),
305 /** data device in the client stack */
306 LU_DEVICE_CL
= (1 << 2)
312 struct lu_device_type
{
314 * Tag bits. Taken from enum lu_device_tag. Never modified once set.
318 * Name of this class. Unique system-wide. Never modified once set.
322 * Operations for this type.
324 const struct lu_device_type_operations
*ldt_ops
;
326 * \todo XXX: temporary pointer to associated obd_type.
328 struct obd_type
*ldt_obd_type
;
330 * \todo XXX: temporary: context tags used by obd_*() calls.
334 * Number of existing device type instances.
336 unsigned ldt_device_nr
;
338 * Linkage into a global list of all device types.
340 * \see lu_device_types.
342 struct list_head ldt_linkage
;
346 * Operations on a device type.
348 struct lu_device_type_operations
{
350 * Allocate new device.
352 struct lu_device
*(*ldto_device_alloc
)(const struct lu_env
*env
,
353 struct lu_device_type
*t
,
354 struct lustre_cfg
*lcfg
);
356 * Free device. Dual to
357 * lu_device_type_operations::ldto_device_alloc(). Returns pointer to
358 * the next device in the stack.
360 struct lu_device
*(*ldto_device_free
)(const struct lu_env
*,
364 * Initialize the devices after allocation
366 int (*ldto_device_init
)(const struct lu_env
*env
,
367 struct lu_device
*, const char *,
370 * Finalize device. Dual to
371 * lu_device_type_operations::ldto_device_init(). Returns pointer to
372 * the next device in the stack.
374 struct lu_device
*(*ldto_device_fini
)(const struct lu_env
*env
,
377 * Initialize device type. This is called on module load.
379 int (*ldto_init
)(struct lu_device_type
*t
);
381 * Finalize device type. Dual to
382 * lu_device_type_operations::ldto_init(). Called on module unload.
384 void (*ldto_fini
)(struct lu_device_type
*t
);
386 * Called when the first device is created.
388 void (*ldto_start
)(struct lu_device_type
*t
);
390 * Called when number of devices drops to 0.
392 void (*ldto_stop
)(struct lu_device_type
*t
);
395 static inline int lu_device_is_md(const struct lu_device
*d
)
397 return ergo(d
!= NULL
, d
->ld_type
->ldt_tags
& LU_DEVICE_MD
);
401 * Common object attributes.
406 /** modification time in seconds since Epoch */
408 /** access time in seconds since Epoch */
410 /** change time in seconds since Epoch */
412 /** 512-byte blocks allocated to object */
414 /** permission bits and file type */
422 /** number of persistent references to this object */
424 /** blk bits of the object*/
426 /** blk size of the object*/
438 /** Bit-mask of valid attributes */
452 LA_BLKSIZE
= 1 << 12,
453 LA_KILL_SUID
= 1 << 13,
454 LA_KILL_SGID
= 1 << 14,
458 * Layer in the layered object.
462 * Header for this object.
464 struct lu_object_header
*lo_header
;
466 * Device for this layer.
468 struct lu_device
*lo_dev
;
470 * Operations for this object.
472 const struct lu_object_operations
*lo_ops
;
474 * Linkage into list of all layers.
476 struct list_head lo_linkage
;
478 * Link to the device, for debugging.
480 struct lu_ref_link lo_dev_ref
;
483 enum lu_object_header_flags
{
485 * Don't keep this object in cache. Object will be destroyed as soon
486 * as last reference to it is released. This flag cannot be cleared
489 LU_OBJECT_HEARD_BANSHEE
= 0,
491 * Mark this object has already been taken out of cache.
493 LU_OBJECT_UNHASHED
= 1
496 enum lu_object_header_attr
{
497 LOHA_EXISTS
= 1 << 0,
498 LOHA_REMOTE
= 1 << 1,
500 * UNIX file type is stored in S_IFMT bits.
502 LOHA_FT_START
= 001 << 12, /**< S_IFIFO */
503 LOHA_FT_END
= 017 << 12, /**< S_IFMT */
507 * "Compound" object, consisting of multiple layers.
509 * Compound object with given fid is unique with given lu_site.
511 * Note, that object does *not* necessary correspond to the real object in the
512 * persistent storage: object is an anchor for locking and method calling, so
513 * it is created for things like not-yet-existing child created by mkdir or
514 * create calls. lu_object_operations::loo_exists() can be used to check
515 * whether object is backed by persistent storage entity.
517 struct lu_object_header
{
519 * Fid, uniquely identifying this object.
521 struct lu_fid loh_fid
;
523 * Object flags from enum lu_object_header_flags. Set and checked
526 unsigned long loh_flags
;
528 * Object reference count. Protected by lu_site::ls_guard.
532 * Common object attributes, cached for efficiency. From enum
533 * lu_object_header_attr.
537 * Linkage into per-site hash table. Protected by lu_site::ls_guard.
539 struct hlist_node loh_hash
;
541 * Linkage into per-site LRU list. Protected by lu_site::ls_guard.
543 struct list_head loh_lru
;
545 * Linkage into list of layers. Never modified once set (except lately
546 * during object destruction). No locking is necessary.
548 struct list_head loh_layers
;
550 * A list of references to this object, for debugging.
552 struct lu_ref loh_reference
;
557 struct lu_site_bkt_data
{
559 * number of busy object on this bucket
563 * LRU list, updated on each access to object. Protected by
564 * bucket lock of lu_site::ls_obj_hash.
566 * "Cold" end of LRU is lu_site::ls_lru.next. Accessed object are
567 * moved to the lu_site::ls_lru.prev (this is due to the non-existence
568 * of list_for_each_entry_safe_reverse()).
570 struct list_head lsb_lru
;
572 * Wait-queue signaled when an object in this site is ultimately
573 * destroyed (lu_object_free()). It is used by lu_object_find() to
574 * wait before re-trying when object in the process of destruction is
575 * found in the hash table.
577 * \see htable_lookup().
579 wait_queue_head_t lsb_marche_funebre
;
587 LU_SS_CACHE_DEATH_RACE
,
593 * lu_site is a "compartment" within which objects are unique, and LRU
594 * discipline is maintained.
596 * lu_site exists so that multiple layered stacks can co-exist in the same
599 * lu_site has the same relation to lu_device as lu_object_header to
606 struct cfs_hash
*ls_obj_hash
;
608 * index of bucket on hash table while purging
612 * Top-level device for this stack.
614 struct lu_device
*ls_top_dev
;
616 * Bottom-level device for this stack
618 struct lu_device
*ls_bottom_dev
;
620 * Linkage into global list of sites.
622 struct list_head ls_linkage
;
624 * List for lu device for this site, protected
627 struct list_head ls_ld_linkage
;
628 spinlock_t ls_ld_lock
;
633 struct lprocfs_stats
*ls_stats
;
635 * XXX: a hack! fld has to find md_site via site, remove when possible
637 struct seq_server_site
*ld_seq_site
;
640 static inline struct lu_site_bkt_data
*
641 lu_site_bkt_from_fid(struct lu_site
*site
, struct lu_fid
*fid
)
643 struct cfs_hash_bd bd
;
645 cfs_hash_bd_get(site
->ls_obj_hash
, fid
, &bd
);
646 return cfs_hash_bd_extra_get(site
->ls_obj_hash
, &bd
);
649 static inline struct seq_server_site
*lu_site2seq(const struct lu_site
*s
)
651 return s
->ld_seq_site
;
655 * Constructors/destructors.
659 int lu_site_init (struct lu_site
*s
, struct lu_device
*d
);
660 void lu_site_fini (struct lu_site
*s
);
661 int lu_site_init_finish (struct lu_site
*s
);
662 void lu_stack_fini (const struct lu_env
*env
, struct lu_device
*top
);
663 void lu_device_get (struct lu_device
*d
);
664 void lu_device_put (struct lu_device
*d
);
665 int lu_device_init (struct lu_device
*d
, struct lu_device_type
*t
);
666 void lu_device_fini (struct lu_device
*d
);
667 int lu_object_header_init(struct lu_object_header
*h
);
668 void lu_object_header_fini(struct lu_object_header
*h
);
669 int lu_object_init (struct lu_object
*o
,
670 struct lu_object_header
*h
, struct lu_device
*d
);
671 void lu_object_fini (struct lu_object
*o
);
672 void lu_object_add_top (struct lu_object_header
*h
, struct lu_object
*o
);
673 void lu_object_add (struct lu_object
*before
, struct lu_object
*o
);
675 void lu_dev_add_linkage(struct lu_site
*s
, struct lu_device
*d
);
676 void lu_dev_del_linkage(struct lu_site
*s
, struct lu_device
*d
);
679 * Helpers to initialize and finalize device types.
682 int lu_device_type_init(struct lu_device_type
*ldt
);
683 void lu_device_type_fini(struct lu_device_type
*ldt
);
684 void lu_types_stop(void);
689 * Caching and reference counting.
694 * Acquire additional reference to the given object. This function is used to
695 * attain additional reference. To acquire initial reference use
698 static inline void lu_object_get(struct lu_object
*o
)
700 LASSERT(atomic_read(&o
->lo_header
->loh_ref
) > 0);
701 atomic_inc(&o
->lo_header
->loh_ref
);
705 * Return true of object will not be cached after last reference to it is
708 static inline int lu_object_is_dying(const struct lu_object_header
*h
)
710 return test_bit(LU_OBJECT_HEARD_BANSHEE
, &h
->loh_flags
);
713 void lu_object_put(const struct lu_env
*env
, struct lu_object
*o
);
714 void lu_object_put_nocache(const struct lu_env
*env
, struct lu_object
*o
);
715 void lu_object_unhash(const struct lu_env
*env
, struct lu_object
*o
);
717 int lu_site_purge(const struct lu_env
*env
, struct lu_site
*s
, int nr
);
719 void lu_site_print(const struct lu_env
*env
, struct lu_site
*s
, void *cookie
,
720 lu_printer_t printer
);
721 struct lu_object
*lu_object_find(const struct lu_env
*env
,
722 struct lu_device
*dev
, const struct lu_fid
*f
,
723 const struct lu_object_conf
*conf
);
724 struct lu_object
*lu_object_find_at(const struct lu_env
*env
,
725 struct lu_device
*dev
,
726 const struct lu_fid
*f
,
727 const struct lu_object_conf
*conf
);
728 struct lu_object
*lu_object_find_slice(const struct lu_env
*env
,
729 struct lu_device
*dev
,
730 const struct lu_fid
*f
,
731 const struct lu_object_conf
*conf
);
740 * First (topmost) sub-object of given compound object
742 static inline struct lu_object
*lu_object_top(struct lu_object_header
*h
)
744 LASSERT(!list_empty(&h
->loh_layers
));
745 return container_of0(h
->loh_layers
.next
, struct lu_object
, lo_linkage
);
749 * Next sub-object in the layering
751 static inline struct lu_object
*lu_object_next(const struct lu_object
*o
)
753 return container_of0(o
->lo_linkage
.next
, struct lu_object
, lo_linkage
);
757 * Pointer to the fid of this object.
759 static inline const struct lu_fid
*lu_object_fid(const struct lu_object
*o
)
761 return &o
->lo_header
->loh_fid
;
765 * return device operations vector for this object
767 static const inline struct lu_device_operations
*
768 lu_object_ops(const struct lu_object
*o
)
770 return o
->lo_dev
->ld_ops
;
774 * Given a compound object, find its slice, corresponding to the device type
777 struct lu_object
*lu_object_locate(struct lu_object_header
*h
,
778 const struct lu_device_type
*dtype
);
781 * Printer function emitting messages through libcfs_debug_msg().
783 int lu_cdebug_printer(const struct lu_env
*env
,
784 void *cookie
, const char *format
, ...);
787 * Print object description followed by a user-supplied message.
789 #define LU_OBJECT_DEBUG(mask, env, object, format, ...) \
791 LIBCFS_DEBUG_MSG_DATA_DECL(msgdata, mask, NULL); \
793 if (cfs_cdebug_show(mask, DEBUG_SUBSYSTEM)) { \
794 lu_object_print(env, &msgdata, lu_cdebug_printer, object);\
795 CDEBUG(mask, format , ## __VA_ARGS__); \
800 * Print short object description followed by a user-supplied message.
802 #define LU_OBJECT_HEADER(mask, env, object, format, ...) \
804 LIBCFS_DEBUG_MSG_DATA_DECL(msgdata, mask, NULL); \
806 if (cfs_cdebug_show(mask, DEBUG_SUBSYSTEM)) { \
807 lu_object_header_print(env, &msgdata, lu_cdebug_printer,\
808 (object)->lo_header); \
809 lu_cdebug_printer(env, &msgdata, "\n"); \
810 CDEBUG(mask, format , ## __VA_ARGS__); \
814 void lu_object_print (const struct lu_env
*env
, void *cookie
,
815 lu_printer_t printer
, const struct lu_object
*o
);
816 void lu_object_header_print(const struct lu_env
*env
, void *cookie
,
817 lu_printer_t printer
,
818 const struct lu_object_header
*hdr
);
821 * Check object consistency.
823 int lu_object_invariant(const struct lu_object
*o
);
827 * Check whether object exists, no matter on local or remote storage.
828 * Note: LOHA_EXISTS will be set once some one created the object,
829 * and it does not needs to be committed to storage.
831 #define lu_object_exists(o) ((o)->lo_header->loh_attr & LOHA_EXISTS)
834 * Check whether object on the remote storage.
836 #define lu_object_remote(o) unlikely((o)->lo_header->loh_attr & LOHA_REMOTE)
838 static inline int lu_object_assert_exists(const struct lu_object
*o
)
840 return lu_object_exists(o
);
843 static inline int lu_object_assert_not_exists(const struct lu_object
*o
)
845 return !lu_object_exists(o
);
849 * Attr of this object.
851 static inline __u32
lu_object_attr(const struct lu_object
*o
)
853 LASSERT(lu_object_exists(o
) != 0);
854 return o
->lo_header
->loh_attr
;
857 static inline void lu_object_ref_add(struct lu_object
*o
,
861 lu_ref_add(&o
->lo_header
->loh_reference
, scope
, source
);
864 static inline void lu_object_ref_add_at(struct lu_object
*o
,
865 struct lu_ref_link
*link
,
869 lu_ref_add_at(&o
->lo_header
->loh_reference
, link
, scope
, source
);
872 static inline void lu_object_ref_del(struct lu_object
*o
,
873 const char *scope
, const void *source
)
875 lu_ref_del(&o
->lo_header
->loh_reference
, scope
, source
);
878 static inline void lu_object_ref_del_at(struct lu_object
*o
,
879 struct lu_ref_link
*link
,
880 const char *scope
, const void *source
)
882 lu_ref_del_at(&o
->lo_header
->loh_reference
, link
, scope
, source
);
885 /** input params, should be filled out by mdt */
889 /** count in bytes */
890 unsigned int rp_count
;
891 /** number of pages */
892 unsigned int rp_npages
;
893 /** requested attr */
895 /** pointers to pages */
896 struct page
**rp_pages
;
899 enum lu_xattr_flags
{
900 LU_XATTR_REPLACE
= (1 << 0),
901 LU_XATTR_CREATE
= (1 << 1)
909 /** For lu_context health-checks */
910 enum lu_context_state
{
918 * lu_context. Execution context for lu_object methods. Currently associated
921 * All lu_object methods, except device and device type methods (called during
922 * system initialization and shutdown) are executed "within" some
923 * lu_context. This means, that pointer to some "current" lu_context is passed
924 * as an argument to all methods.
926 * All service ptlrpc threads create lu_context as part of their
927 * initialization. It is possible to create "stand-alone" context for other
928 * execution environments (like system calls).
930 * lu_object methods mainly use lu_context through lu_context_key interface
931 * that allows each layer to associate arbitrary pieces of data with each
932 * context (see pthread_key_create(3) for similar interface).
934 * On a client, lu_context is bound to a thread, see cl_env_get().
936 * \see lu_context_key
940 * lu_context is used on the client side too. Yet we don't want to
941 * allocate values of server-side keys for the client contexts and
944 * To achieve this, set of tags in introduced. Contexts and keys are
945 * marked with tags. Key value are created only for context whose set
946 * of tags has non-empty intersection with one for key. Tags are taken
947 * from enum lu_context_tag.
950 enum lu_context_state lc_state
;
952 * Pointer to the home service thread. NULL for other execution
955 struct ptlrpc_thread
*lc_thread
;
957 * Pointer to an array with key values. Internal implementation
962 * Linkage into a list of all remembered contexts. Only
963 * `non-transient' contexts, i.e., ones created for service threads
966 struct list_head lc_remember
;
968 * Version counter used to skip calls to lu_context_refill() when no
969 * keys were registered.
979 * lu_context_key interface. Similar to pthread_key.
982 enum lu_context_tag
{
984 * Thread on md server
986 LCT_MD_THREAD
= 1 << 0,
988 * Thread on dt server
990 LCT_DT_THREAD
= 1 << 1,
992 * Context for transaction handle
994 LCT_TX_HANDLE
= 1 << 2,
998 LCT_CL_THREAD
= 1 << 3,
1000 * A per-request session on a server, and a per-system-call session on
1003 LCT_SESSION
= 1 << 4,
1005 * A per-request data on OSP device
1007 LCT_OSP_THREAD
= 1 << 5,
1011 LCT_MG_THREAD
= 1 << 6,
1013 * Context for local operations
1017 * Set when at least one of keys, having values in this context has
1018 * non-NULL lu_context_key::lct_exit() method. This is used to
1019 * optimize lu_context_exit() call.
1021 LCT_HAS_EXIT
= 1 << 28,
1023 * Don't add references for modules creating key values in that context.
1024 * This is only for contexts used internally by lu_object framework.
1026 LCT_NOREF
= 1 << 29,
1028 * Key is being prepared for retiring, don't create new values for it.
1030 LCT_QUIESCENT
= 1 << 30,
1032 * Context should be remembered.
1034 LCT_REMEMBER
= 1 << 31,
1036 * Contexts usable in cache shrinker thread.
1038 LCT_SHRINKER
= LCT_MD_THREAD
|LCT_DT_THREAD
|LCT_CL_THREAD
|LCT_NOREF
1042 * Key. Represents per-context value slot.
1044 * Keys are usually registered when module owning the key is initialized, and
1045 * de-registered when module is unloaded. Once key is registered, all new
1046 * contexts with matching tags, will get key value. "Old" contexts, already
1047 * initialized at the time of key registration, can be forced to get key value
1048 * by calling lu_context_refill().
1050 * Every key value is counted in lu_context_key::lct_used and acquires a
1051 * reference on an owning module. This means, that all key values have to be
1052 * destroyed before module can be unloaded. This is usually achieved by
1053 * stopping threads started by the module, that created contexts in their
1054 * entry functions. Situation is complicated by the threads shared by multiple
1055 * modules, like ptlrpcd daemon on a client. To work around this problem,
1056 * contexts, created in such threads, are `remembered' (see
1057 * LCT_REMEMBER)---i.e., added into a global list. When module is preparing
1058 * for unloading it does the following:
1060 * - marks its keys as `quiescent' (lu_context_tag::LCT_QUIESCENT)
1061 * preventing new key values from being allocated in the new contexts,
1064 * - scans a list of remembered contexts, destroying values of module
1065 * keys, thus releasing references to the module.
1067 * This is done by lu_context_key_quiesce(). If module is re-activated
1068 * before key has been de-registered, lu_context_key_revive() call clears
1069 * `quiescent' marker.
1071 * lu_context code doesn't provide any internal synchronization for these
1072 * activities---it's assumed that startup (including threads start-up) and
1073 * shutdown are serialized by some external means.
1077 struct lu_context_key
{
1079 * Set of tags for which values of this key are to be instantiated.
1083 * Value constructor. This is called when new value is created for a
1084 * context. Returns pointer to new value of error pointer.
1086 void *(*lct_init
)(const struct lu_context
*ctx
,
1087 struct lu_context_key
*key
);
1089 * Value destructor. Called when context with previously allocated
1090 * value of this slot is destroyed. \a data is a value that was returned
1091 * by a matching call to lu_context_key::lct_init().
1093 void (*lct_fini
)(const struct lu_context
*ctx
,
1094 struct lu_context_key
*key
, void *data
);
1096 * Optional method called on lu_context_exit() for all allocated
1097 * keys. Can be used by debugging code checking that locks are
1100 void (*lct_exit
)(const struct lu_context
*ctx
,
1101 struct lu_context_key
*key
, void *data
);
1103 * Internal implementation detail: index within lu_context::lc_value[]
1104 * reserved for this key.
1108 * Internal implementation detail: number of values created for this
1113 * Internal implementation detail: module for this key.
1115 struct module
*lct_owner
;
1117 * References to this key. For debugging.
1119 struct lu_ref lct_reference
;
1122 #define LU_KEY_INIT(mod, type) \
1123 static void* mod##_key_init(const struct lu_context *ctx, \
1124 struct lu_context_key *key) \
1128 CLASSERT(PAGE_CACHE_SIZE >= sizeof (*value)); \
1130 OBD_ALLOC_PTR(value); \
1131 if (value == NULL) \
1132 value = ERR_PTR(-ENOMEM); \
1136 struct __##mod##__dummy_init {;} /* semicolon catcher */
1138 #define LU_KEY_FINI(mod, type) \
1139 static void mod##_key_fini(const struct lu_context *ctx, \
1140 struct lu_context_key *key, void* data) \
1142 type *info = data; \
1144 OBD_FREE_PTR(info); \
1146 struct __##mod##__dummy_fini {;} /* semicolon catcher */
1148 #define LU_KEY_INIT_FINI(mod, type) \
1149 LU_KEY_INIT(mod,type); \
1150 LU_KEY_FINI(mod,type)
1152 #define LU_CONTEXT_KEY_DEFINE(mod, tags) \
1153 struct lu_context_key mod##_thread_key = { \
1155 .lct_init = mod##_key_init, \
1156 .lct_fini = mod##_key_fini \
1159 #define LU_CONTEXT_KEY_INIT(key) \
1161 (key)->lct_owner = THIS_MODULE; \
1164 int lu_context_key_register(struct lu_context_key
*key
);
1165 void lu_context_key_degister(struct lu_context_key
*key
);
1166 void *lu_context_key_get (const struct lu_context
*ctx
,
1167 const struct lu_context_key
*key
);
1168 void lu_context_key_quiesce (struct lu_context_key
*key
);
1169 void lu_context_key_revive (struct lu_context_key
*key
);
1173 * LU_KEY_INIT_GENERIC() has to be a macro to correctly determine an
1177 #define LU_KEY_INIT_GENERIC(mod) \
1178 static void mod##_key_init_generic(struct lu_context_key *k, ...) \
1180 struct lu_context_key *key = k; \
1183 va_start(args, k); \
1185 LU_CONTEXT_KEY_INIT(key); \
1186 key = va_arg(args, struct lu_context_key *); \
1187 } while (key != NULL); \
1191 #define LU_TYPE_INIT(mod, ...) \
1192 LU_KEY_INIT_GENERIC(mod) \
1193 static int mod##_type_init(struct lu_device_type *t) \
1195 mod##_key_init_generic(__VA_ARGS__, NULL); \
1196 return lu_context_key_register_many(__VA_ARGS__, NULL); \
1198 struct __##mod##_dummy_type_init {;}
1200 #define LU_TYPE_FINI(mod, ...) \
1201 static void mod##_type_fini(struct lu_device_type *t) \
1203 lu_context_key_degister_many(__VA_ARGS__, NULL); \
1205 struct __##mod##_dummy_type_fini {;}
1207 #define LU_TYPE_START(mod, ...) \
1208 static void mod##_type_start(struct lu_device_type *t) \
1210 lu_context_key_revive_many(__VA_ARGS__, NULL); \
1212 struct __##mod##_dummy_type_start {;}
1214 #define LU_TYPE_STOP(mod, ...) \
1215 static void mod##_type_stop(struct lu_device_type *t) \
1217 lu_context_key_quiesce_many(__VA_ARGS__, NULL); \
1219 struct __##mod##_dummy_type_stop {;}
1223 #define LU_TYPE_INIT_FINI(mod, ...) \
1224 LU_TYPE_INIT(mod, __VA_ARGS__); \
1225 LU_TYPE_FINI(mod, __VA_ARGS__); \
1226 LU_TYPE_START(mod, __VA_ARGS__); \
1227 LU_TYPE_STOP(mod, __VA_ARGS__)
1229 int lu_context_init (struct lu_context
*ctx
, __u32 tags
);
1230 void lu_context_fini (struct lu_context
*ctx
);
1231 void lu_context_enter (struct lu_context
*ctx
);
1232 void lu_context_exit (struct lu_context
*ctx
);
1233 int lu_context_refill(struct lu_context
*ctx
);
1236 * Helper functions to operate on multiple keys. These are used by the default
1237 * device type operations, defined by LU_TYPE_INIT_FINI().
1240 int lu_context_key_register_many(struct lu_context_key
*k
, ...);
1241 void lu_context_key_degister_many(struct lu_context_key
*k
, ...);
1242 void lu_context_key_revive_many (struct lu_context_key
*k
, ...);
1243 void lu_context_key_quiesce_many (struct lu_context_key
*k
, ...);
1246 * update/clear ctx/ses tags.
1248 void lu_context_tags_update(__u32 tags
);
1249 void lu_context_tags_clear(__u32 tags
);
1250 void lu_session_tags_update(__u32 tags
);
1251 void lu_session_tags_clear(__u32 tags
);
1258 * "Local" context, used to store data instead of stack.
1260 struct lu_context le_ctx
;
1262 * "Session" context for per-request data.
1264 struct lu_context
*le_ses
;
1267 int lu_env_init (struct lu_env
*env
, __u32 tags
);
1268 void lu_env_fini (struct lu_env
*env
);
1269 int lu_env_refill(struct lu_env
*env
);
1270 int lu_env_refill_by_tags(struct lu_env
*env
, __u32 ctags
, __u32 stags
);
1272 /** @} lu_context */
1275 * Output site statistical counters into a buffer. Suitable for
1276 * ll_rd_*()-style functions.
1278 int lu_site_stats_print(const struct lu_site
*s
, struct seq_file
*m
);
1281 * Common name structure to be passed around for various name related methods.
1284 const char *ln_name
;
1289 * Common buffer structure to be passed around for various xattr_{s,g}et()
1297 #define DLUBUF "(%p %zu)"
1298 #define PLUBUF(buf) (buf)->lb_buf, (buf)->lb_len
1300 * One-time initializers, called at obdclass module initialization, not
1305 * Initialization of global lu_* data.
1307 int lu_global_init(void);
1310 * Dual to lu_global_init().
1312 void lu_global_fini(void);
1314 struct lu_kmem_descr
{
1315 struct kmem_cache
**ckd_cache
;
1316 const char *ckd_name
;
1317 const size_t ckd_size
;
1320 int lu_kmem_init(struct lu_kmem_descr
*caches
);
1321 void lu_kmem_fini(struct lu_kmem_descr
*caches
);
1323 void lu_object_assign_fid(const struct lu_env
*env
, struct lu_object
*o
,
1324 const struct lu_fid
*fid
);
1325 struct lu_object
*lu_object_anon(const struct lu_env
*env
,
1326 struct lu_device
*dev
,
1327 const struct lu_object_conf
*conf
);
1330 extern struct lu_buf LU_BUF_NULL
;
1332 void lu_buf_free(struct lu_buf
*buf
);
1333 void lu_buf_alloc(struct lu_buf
*buf
, int size
);
1334 void lu_buf_realloc(struct lu_buf
*buf
, int size
);
1336 int lu_buf_check_and_grow(struct lu_buf
*buf
, int len
);
1337 struct lu_buf
*lu_buf_check_and_alloc(struct lu_buf
*buf
, int len
);
1340 #endif /* __LUSTRE_LU_OBJECT_H */