2 * Front panel driver for Linux
3 * Copyright (C) 2000-2008, Willy Tarreau <w@1wt.eu>
5 * This program is free software; you can redistribute it and/or
6 * modify it under the terms of the GNU General Public License
7 * as published by the Free Software Foundation; either version
8 * 2 of the License, or (at your option) any later version.
10 * This code drives an LCD module (/dev/lcd), and a keypad (/dev/keypad)
11 * connected to a parallel printer port.
13 * The LCD module may either be an HD44780-like 8-bit parallel LCD, or a 1-bit
14 * serial module compatible with Samsung's KS0074. The pins may be connected in
15 * any combination, everything is programmable.
17 * The keypad consists in a matrix of push buttons connecting input pins to
18 * data output pins or to the ground. The combinations have to be hard-coded
19 * in the driver, though several profiles exist and adding new ones is easy.
21 * Several profiles are provided for commonly found LCD+keypad modules on the
22 * market, such as those found in Nexcom's appliances.
25 * - the initialization/deinitialization process is very dirty and should
26 * be rewritten. It may even be buggy.
29 * - document 24 keys keyboard (3 rows of 8 cols, 32 diodes + 2 inputs)
30 * - make the LCD a part of a virtual screen of Vx*Vy
31 * - make the inputs list smp-safe
32 * - change the keyboard to a double mapping : signals -> key_id -> values
33 * so that applications can change values without knowing signals
37 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
39 #include <linux/module.h>
41 #include <linux/types.h>
42 #include <linux/errno.h>
43 #include <linux/signal.h>
44 #include <linux/sched.h>
45 #include <linux/spinlock.h>
46 #include <linux/interrupt.h>
47 #include <linux/miscdevice.h>
48 #include <linux/slab.h>
49 #include <linux/ioport.h>
50 #include <linux/fcntl.h>
51 #include <linux/init.h>
52 #include <linux/delay.h>
53 #include <linux/kernel.h>
54 #include <linux/ctype.h>
55 #include <linux/parport.h>
56 #include <linux/list.h>
57 #include <linux/notifier.h>
58 #include <linux/reboot.h>
59 #include <generated/utsrelease.h>
62 #include <linux/uaccess.h>
65 #define KEYPAD_MINOR 185
67 #define PANEL_VERSION "0.9.5"
69 #define LCD_MAXBYTES 256 /* max burst write */
71 #define KEYPAD_BUFFER 64
73 /* poll the keyboard this every second */
74 #define INPUT_POLL_TIME (HZ/50)
75 /* a key starts to repeat after this times INPUT_POLL_TIME */
76 #define KEYPAD_REP_START (10)
77 /* a key repeats this times INPUT_POLL_TIME */
78 #define KEYPAD_REP_DELAY (2)
80 /* keep the light on this times INPUT_POLL_TIME for each flash */
81 #define FLASH_LIGHT_TEMPO (200)
83 /* converts an r_str() input to an active high, bits string : 000BAOSE */
84 #define PNL_PINPUT(a) ((((unsigned char)(a)) ^ 0x7F) >> 3)
86 #define PNL_PBUSY 0x80 /* inverted input, active low */
87 #define PNL_PACK 0x40 /* direct input, active low */
88 #define PNL_POUTPA 0x20 /* direct input, active high */
89 #define PNL_PSELECD 0x10 /* direct input, active high */
90 #define PNL_PERRORP 0x08 /* direct input, active low */
92 #define PNL_PBIDIR 0x20 /* bi-directional ports */
93 /* high to read data in or-ed with data out */
94 #define PNL_PINTEN 0x10
95 #define PNL_PSELECP 0x08 /* inverted output, active low */
96 #define PNL_PINITP 0x04 /* direct output, active low */
97 #define PNL_PAUTOLF 0x02 /* inverted output, active low */
98 #define PNL_PSTROBE 0x01 /* inverted output */
119 #define PIN_AUTOLF 14
121 #define PIN_SELECP 17
122 #define PIN_NOT_SET 127
124 #define LCD_FLAG_S 0x0001
125 #define LCD_FLAG_ID 0x0002
126 #define LCD_FLAG_B 0x0004 /* blink on */
127 #define LCD_FLAG_C 0x0008 /* cursor on */
128 #define LCD_FLAG_D 0x0010 /* display on */
129 #define LCD_FLAG_F 0x0020 /* large font mode */
130 #define LCD_FLAG_N 0x0040 /* 2-rows mode */
131 #define LCD_FLAG_L 0x0080 /* backlight enabled */
134 #define LCD_CMD_DISPLAY_CLEAR 0x01 /* Clear entire display */
136 #define LCD_CMD_ENTRY_MODE 0x04 /* Set entry mode */
137 #define LCD_CMD_CURSOR_INC 0x02 /* Increment cursor */
139 #define LCD_CMD_DISPLAY_CTRL 0x08 /* Display control */
140 #define LCD_CMD_DISPLAY_ON 0x04 /* Set display on */
141 #define LCD_CMD_CURSOR_ON 0x02 /* Set cursor on */
142 #define LCD_CMD_BLINK_ON 0x01 /* Set blink on */
144 #define LCD_CMD_SHIFT 0x10 /* Shift cursor/display */
145 #define LCD_CMD_DISPLAY_SHIFT 0x08 /* Shift display instead of cursor */
146 #define LCD_CMD_SHIFT_RIGHT 0x04 /* Shift display/cursor to the right */
148 #define LCD_CMD_FUNCTION_SET 0x20 /* Set function */
149 #define LCD_CMD_DATA_LEN_8BITS 0x10 /* Set data length to 8 bits */
150 #define LCD_CMD_TWO_LINES 0x08 /* Set to two display lines */
151 #define LCD_CMD_FONT_5X10_DOTS 0x04 /* Set char font to 5x10 dots */
153 #define LCD_CMD_SET_CGRAM_ADDR 0x40 /* Set char generator RAM address */
155 #define LCD_CMD_SET_DDRAM_ADDR 0x80 /* Set display data RAM address */
157 #define LCD_ESCAPE_LEN 24 /* max chars for LCD escape command */
158 #define LCD_ESCAPE_CHAR 27 /* use char 27 for escape command */
162 /* macros to simplify use of the parallel port */
163 #define r_ctr(x) (parport_read_control((x)->port))
164 #define r_dtr(x) (parport_read_data((x)->port))
165 #define r_str(x) (parport_read_status((x)->port))
166 #define w_ctr(x, y) (parport_write_control((x)->port, (y)))
167 #define w_dtr(x, y) (parport_write_data((x)->port, (y)))
169 /* this defines which bits are to be used and which ones to be ignored */
170 /* logical or of the output bits involved in the scan matrix */
171 static __u8 scan_mask_o
;
172 /* logical or of the input bits involved in the scan matrix */
173 static __u8 scan_mask_i
;
175 typedef __u64 pmask_t
;
189 struct logical_input
{
190 struct list_head list
;
193 enum input_type type
;
194 enum input_state state
;
195 __u8 rise_time
, fall_time
;
196 __u8 rise_timer
, fall_timer
, high_timer
;
199 struct { /* valid when type == INPUT_TYPE_STD */
200 void (*press_fct
)(int);
201 void (*release_fct
)(int);
205 struct { /* valid when type == INPUT_TYPE_KBD */
206 /* strings can be non null-terminated */
207 char press_str
[sizeof(void *) + sizeof(int)];
208 char repeat_str
[sizeof(void *) + sizeof(int)];
209 char release_str
[sizeof(void *) + sizeof(int)];
214 static LIST_HEAD(logical_inputs
); /* list of all defined logical inputs */
216 /* physical contacts history
217 * Physical contacts are a 45 bits string of 9 groups of 5 bits each.
218 * The 8 lower groups correspond to output bits 0 to 7, and the 9th group
219 * corresponds to the ground.
220 * Within each group, bits are stored in the same order as read on the port :
221 * BAPSE (busy=4, ack=3, paper empty=2, select=1, error=0).
222 * So, each __u64 (or pmask_t) is represented like this :
223 * 0000000000000000000BAPSEBAPSEBAPSEBAPSEBAPSEBAPSEBAPSEBAPSEBAPSE
224 * <-----unused------><gnd><d07><d06><d05><d04><d03><d02><d01><d00>
227 /* what has just been read from the I/O ports */
228 static pmask_t phys_read
;
229 /* previous phys_read */
230 static pmask_t phys_read_prev
;
231 /* stabilized phys_read (phys_read|phys_read_prev) */
232 static pmask_t phys_curr
;
233 /* previous phys_curr */
234 static pmask_t phys_prev
;
235 /* 0 means that at least one logical signal needs be computed */
236 static char inputs_stable
;
238 /* these variables are specific to the keypad */
243 static char keypad_buffer
[KEYPAD_BUFFER
];
244 static int keypad_buflen
;
245 static int keypad_start
;
246 static char keypressed
;
247 static wait_queue_head_t keypad_read_wait
;
249 /* lcd-specific variables */
263 /* TODO: use union here? */
273 /* contains the LCD config state */
274 unsigned long int flags
;
276 /* Contains the LCD X and Y offset */
282 /* Current escape sequence and it's length or -1 if outside */
284 char buf
[LCD_ESCAPE_LEN
+ 1];
289 /* Needed only for init */
290 static int selected_lcd_type
= NOT_SET
;
293 * Bit masks to convert LCD signals to parallel port outputs.
294 * _d_ are values for data port, _c_ are for control port.
295 * [0] = signal OFF, [1] = signal ON, [2] = mask
302 * one entry for each bit on the LCD
313 * each bit can be either connected to a DATA or CTRL port
319 static unsigned char lcd_bits
[LCD_PORTS
][LCD_BITS
][BIT_STATES
];
324 #define LCD_PROTO_PARALLEL 0
325 #define LCD_PROTO_SERIAL 1
326 #define LCD_PROTO_TI_DA8XX_LCD 2
331 #define LCD_CHARSET_NORMAL 0
332 #define LCD_CHARSET_KS0074 1
337 #define LCD_TYPE_NONE 0
338 #define LCD_TYPE_CUSTOM 1
339 #define LCD_TYPE_OLD 2
340 #define LCD_TYPE_KS0074 3
341 #define LCD_TYPE_HANTRONIX 4
342 #define LCD_TYPE_NEXCOM 5
347 #define KEYPAD_TYPE_NONE 0
348 #define KEYPAD_TYPE_OLD 1
349 #define KEYPAD_TYPE_NEW 2
350 #define KEYPAD_TYPE_NEXCOM 3
355 #define PANEL_PROFILE_CUSTOM 0
356 #define PANEL_PROFILE_OLD 1
357 #define PANEL_PROFILE_NEW 2
358 #define PANEL_PROFILE_HANTRONIX 3
359 #define PANEL_PROFILE_NEXCOM 4
360 #define PANEL_PROFILE_LARGE 5
363 * Construct custom config from the kernel's configuration
365 #define DEFAULT_PARPORT 0
366 #define DEFAULT_PROFILE PANEL_PROFILE_LARGE
367 #define DEFAULT_KEYPAD_TYPE KEYPAD_TYPE_OLD
368 #define DEFAULT_LCD_TYPE LCD_TYPE_OLD
369 #define DEFAULT_LCD_HEIGHT 2
370 #define DEFAULT_LCD_WIDTH 40
371 #define DEFAULT_LCD_BWIDTH 40
372 #define DEFAULT_LCD_HWIDTH 64
373 #define DEFAULT_LCD_CHARSET LCD_CHARSET_NORMAL
374 #define DEFAULT_LCD_PROTO LCD_PROTO_PARALLEL
376 #define DEFAULT_LCD_PIN_E PIN_AUTOLF
377 #define DEFAULT_LCD_PIN_RS PIN_SELECP
378 #define DEFAULT_LCD_PIN_RW PIN_INITP
379 #define DEFAULT_LCD_PIN_SCL PIN_STROBE
380 #define DEFAULT_LCD_PIN_SDA PIN_D0
381 #define DEFAULT_LCD_PIN_BL PIN_NOT_SET
383 #ifdef CONFIG_PANEL_PARPORT
384 #undef DEFAULT_PARPORT
385 #define DEFAULT_PARPORT CONFIG_PANEL_PARPORT
388 #ifdef CONFIG_PANEL_PROFILE
389 #undef DEFAULT_PROFILE
390 #define DEFAULT_PROFILE CONFIG_PANEL_PROFILE
393 #if DEFAULT_PROFILE == 0 /* custom */
394 #ifdef CONFIG_PANEL_KEYPAD
395 #undef DEFAULT_KEYPAD_TYPE
396 #define DEFAULT_KEYPAD_TYPE CONFIG_PANEL_KEYPAD
399 #ifdef CONFIG_PANEL_LCD
400 #undef DEFAULT_LCD_TYPE
401 #define DEFAULT_LCD_TYPE CONFIG_PANEL_LCD
404 #ifdef CONFIG_PANEL_LCD_HEIGHT
405 #undef DEFAULT_LCD_HEIGHT
406 #define DEFAULT_LCD_HEIGHT CONFIG_PANEL_LCD_HEIGHT
409 #ifdef CONFIG_PANEL_LCD_WIDTH
410 #undef DEFAULT_LCD_WIDTH
411 #define DEFAULT_LCD_WIDTH CONFIG_PANEL_LCD_WIDTH
414 #ifdef CONFIG_PANEL_LCD_BWIDTH
415 #undef DEFAULT_LCD_BWIDTH
416 #define DEFAULT_LCD_BWIDTH CONFIG_PANEL_LCD_BWIDTH
419 #ifdef CONFIG_PANEL_LCD_HWIDTH
420 #undef DEFAULT_LCD_HWIDTH
421 #define DEFAULT_LCD_HWIDTH CONFIG_PANEL_LCD_HWIDTH
424 #ifdef CONFIG_PANEL_LCD_CHARSET
425 #undef DEFAULT_LCD_CHARSET
426 #define DEFAULT_LCD_CHARSET CONFIG_PANEL_LCD_CHARSET
429 #ifdef CONFIG_PANEL_LCD_PROTO
430 #undef DEFAULT_LCD_PROTO
431 #define DEFAULT_LCD_PROTO CONFIG_PANEL_LCD_PROTO
434 #ifdef CONFIG_PANEL_LCD_PIN_E
435 #undef DEFAULT_LCD_PIN_E
436 #define DEFAULT_LCD_PIN_E CONFIG_PANEL_LCD_PIN_E
439 #ifdef CONFIG_PANEL_LCD_PIN_RS
440 #undef DEFAULT_LCD_PIN_RS
441 #define DEFAULT_LCD_PIN_RS CONFIG_PANEL_LCD_PIN_RS
444 #ifdef CONFIG_PANEL_LCD_PIN_RW
445 #undef DEFAULT_LCD_PIN_RW
446 #define DEFAULT_LCD_PIN_RW CONFIG_PANEL_LCD_PIN_RW
449 #ifdef CONFIG_PANEL_LCD_PIN_SCL
450 #undef DEFAULT_LCD_PIN_SCL
451 #define DEFAULT_LCD_PIN_SCL CONFIG_PANEL_LCD_PIN_SCL
454 #ifdef CONFIG_PANEL_LCD_PIN_SDA
455 #undef DEFAULT_LCD_PIN_SDA
456 #define DEFAULT_LCD_PIN_SDA CONFIG_PANEL_LCD_PIN_SDA
459 #ifdef CONFIG_PANEL_LCD_PIN_BL
460 #undef DEFAULT_LCD_PIN_BL
461 #define DEFAULT_LCD_PIN_BL CONFIG_PANEL_LCD_PIN_BL
464 #endif /* DEFAULT_PROFILE == 0 */
466 /* global variables */
468 /* Device single-open policy control */
469 static atomic_t lcd_available
= ATOMIC_INIT(1);
470 static atomic_t keypad_available
= ATOMIC_INIT(1);
472 static struct pardevice
*pprt
;
474 static int keypad_initialized
;
476 static void (*lcd_write_cmd
)(int);
477 static void (*lcd_write_data
)(int);
478 static void (*lcd_clear_fast
)(void);
480 static DEFINE_SPINLOCK(pprt_lock
);
481 static struct timer_list scan_timer
;
483 MODULE_DESCRIPTION("Generic parallel port LCD/Keypad driver");
485 static int parport
= DEFAULT_PARPORT
;
486 module_param(parport
, int, 0000);
487 MODULE_PARM_DESC(parport
, "Parallel port index (0=lpt1, 1=lpt2, ...)");
489 static int profile
= DEFAULT_PROFILE
;
490 module_param(profile
, int, 0000);
491 MODULE_PARM_DESC(profile
,
492 "1=16x2 old kp; 2=serial 16x2, new kp; 3=16x2 hantronix; "
493 "4=16x2 nexcom; default=40x2, old kp");
495 static int keypad_type
= NOT_SET
;
496 module_param(keypad_type
, int, 0000);
497 MODULE_PARM_DESC(keypad_type
,
498 "Keypad type: 0=none, 1=old 6 keys, 2=new 6+1 keys, 3=nexcom 4 keys");
500 static int lcd_type
= NOT_SET
;
501 module_param(lcd_type
, int, 0000);
502 MODULE_PARM_DESC(lcd_type
,
503 "LCD type: 0=none, 1=compiled-in, 2=old, 3=serial ks0074, 4=hantronix, 5=nexcom");
505 static int lcd_height
= NOT_SET
;
506 module_param(lcd_height
, int, 0000);
507 MODULE_PARM_DESC(lcd_height
, "Number of lines on the LCD");
509 static int lcd_width
= NOT_SET
;
510 module_param(lcd_width
, int, 0000);
511 MODULE_PARM_DESC(lcd_width
, "Number of columns on the LCD");
513 static int lcd_bwidth
= NOT_SET
; /* internal buffer width (usually 40) */
514 module_param(lcd_bwidth
, int, 0000);
515 MODULE_PARM_DESC(lcd_bwidth
, "Internal LCD line width (40)");
517 static int lcd_hwidth
= NOT_SET
; /* hardware buffer width (usually 64) */
518 module_param(lcd_hwidth
, int, 0000);
519 MODULE_PARM_DESC(lcd_hwidth
, "LCD line hardware address (64)");
521 static int lcd_charset
= NOT_SET
;
522 module_param(lcd_charset
, int, 0000);
523 MODULE_PARM_DESC(lcd_charset
, "LCD character set: 0=standard, 1=KS0074");
525 static int lcd_proto
= NOT_SET
;
526 module_param(lcd_proto
, int, 0000);
527 MODULE_PARM_DESC(lcd_proto
,
528 "LCD communication: 0=parallel (//), 1=serial, 2=TI LCD Interface");
531 * These are the parallel port pins the LCD control signals are connected to.
532 * Set this to 0 if the signal is not used. Set it to its opposite value
533 * (negative) if the signal is negated. -MAXINT is used to indicate that the
534 * pin has not been explicitly specified.
536 * WARNING! no check will be performed about collisions with keypad !
539 static int lcd_e_pin
= PIN_NOT_SET
;
540 module_param(lcd_e_pin
, int, 0000);
541 MODULE_PARM_DESC(lcd_e_pin
,
542 "# of the // port pin connected to LCD 'E' signal, with polarity (-17..17)");
544 static int lcd_rs_pin
= PIN_NOT_SET
;
545 module_param(lcd_rs_pin
, int, 0000);
546 MODULE_PARM_DESC(lcd_rs_pin
,
547 "# of the // port pin connected to LCD 'RS' signal, with polarity (-17..17)");
549 static int lcd_rw_pin
= PIN_NOT_SET
;
550 module_param(lcd_rw_pin
, int, 0000);
551 MODULE_PARM_DESC(lcd_rw_pin
,
552 "# of the // port pin connected to LCD 'RW' signal, with polarity (-17..17)");
554 static int lcd_cl_pin
= PIN_NOT_SET
;
555 module_param(lcd_cl_pin
, int, 0000);
556 MODULE_PARM_DESC(lcd_cl_pin
,
557 "# of the // port pin connected to serial LCD 'SCL' signal, with polarity (-17..17)");
559 static int lcd_da_pin
= PIN_NOT_SET
;
560 module_param(lcd_da_pin
, int, 0000);
561 MODULE_PARM_DESC(lcd_da_pin
,
562 "# of the // port pin connected to serial LCD 'SDA' signal, with polarity (-17..17)");
564 static int lcd_bl_pin
= PIN_NOT_SET
;
565 module_param(lcd_bl_pin
, int, 0000);
566 MODULE_PARM_DESC(lcd_bl_pin
,
567 "# of the // port pin connected to LCD backlight, with polarity (-17..17)");
569 /* Deprecated module parameters - consider not using them anymore */
571 static int lcd_enabled
= NOT_SET
;
572 module_param(lcd_enabled
, int, 0000);
573 MODULE_PARM_DESC(lcd_enabled
, "Deprecated option, use lcd_type instead");
575 static int keypad_enabled
= NOT_SET
;
576 module_param(keypad_enabled
, int, 0000);
577 MODULE_PARM_DESC(keypad_enabled
, "Deprecated option, use keypad_type instead");
580 static const unsigned char *lcd_char_conv
;
582 /* for some LCD drivers (ks0074) we need a charset conversion table. */
583 static const unsigned char lcd_char_conv_ks0074
[256] = {
584 /* 0|8 1|9 2|A 3|B 4|C 5|D 6|E 7|F */
585 /* 0x00 */ 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07,
586 /* 0x08 */ 0x08, 0x09, 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f,
587 /* 0x10 */ 0x10, 0x11, 0x12, 0x13, 0x14, 0x15, 0x16, 0x17,
588 /* 0x18 */ 0x18, 0x19, 0x1a, 0x1b, 0x1c, 0x1d, 0x1e, 0x1f,
589 /* 0x20 */ 0x20, 0x21, 0x22, 0x23, 0xa2, 0x25, 0x26, 0x27,
590 /* 0x28 */ 0x28, 0x29, 0x2a, 0x2b, 0x2c, 0x2d, 0x2e, 0x2f,
591 /* 0x30 */ 0x30, 0x31, 0x32, 0x33, 0x34, 0x35, 0x36, 0x37,
592 /* 0x38 */ 0x38, 0x39, 0x3a, 0x3b, 0x3c, 0x3d, 0x3e, 0x3f,
593 /* 0x40 */ 0xa0, 0x41, 0x42, 0x43, 0x44, 0x45, 0x46, 0x47,
594 /* 0x48 */ 0x48, 0x49, 0x4a, 0x4b, 0x4c, 0x4d, 0x4e, 0x4f,
595 /* 0x50 */ 0x50, 0x51, 0x52, 0x53, 0x54, 0x55, 0x56, 0x57,
596 /* 0x58 */ 0x58, 0x59, 0x5a, 0xfa, 0xfb, 0xfc, 0x1d, 0xc4,
597 /* 0x60 */ 0x96, 0x61, 0x62, 0x63, 0x64, 0x65, 0x66, 0x67,
598 /* 0x68 */ 0x68, 0x69, 0x6a, 0x6b, 0x6c, 0x6d, 0x6e, 0x6f,
599 /* 0x70 */ 0x70, 0x71, 0x72, 0x73, 0x74, 0x75, 0x76, 0x77,
600 /* 0x78 */ 0x78, 0x79, 0x7a, 0xfd, 0xfe, 0xff, 0xce, 0x20,
601 /* 0x80 */ 0x80, 0x81, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87,
602 /* 0x88 */ 0x88, 0x89, 0x8a, 0x8b, 0x8c, 0x8d, 0x8e, 0x8f,
603 /* 0x90 */ 0x90, 0x91, 0x92, 0x93, 0x94, 0x95, 0x96, 0x97,
604 /* 0x98 */ 0x98, 0x99, 0x9a, 0x9b, 0x9c, 0x9d, 0x9e, 0x9f,
605 /* 0xA0 */ 0x20, 0x40, 0xb1, 0xa1, 0x24, 0xa3, 0xfe, 0x5f,
606 /* 0xA8 */ 0x22, 0xc8, 0x61, 0x14, 0x97, 0x2d, 0xad, 0x96,
607 /* 0xB0 */ 0x80, 0x8c, 0x82, 0x83, 0x27, 0x8f, 0x86, 0xdd,
608 /* 0xB8 */ 0x2c, 0x81, 0x6f, 0x15, 0x8b, 0x8a, 0x84, 0x60,
609 /* 0xC0 */ 0xe2, 0xe2, 0xe2, 0x5b, 0x5b, 0xae, 0xbc, 0xa9,
610 /* 0xC8 */ 0xc5, 0xbf, 0xc6, 0xf1, 0xe3, 0xe3, 0xe3, 0xe3,
611 /* 0xD0 */ 0x44, 0x5d, 0xa8, 0xe4, 0xec, 0xec, 0x5c, 0x78,
612 /* 0xD8 */ 0xab, 0xa6, 0xe5, 0x5e, 0x5e, 0xe6, 0xaa, 0xbe,
613 /* 0xE0 */ 0x7f, 0xe7, 0xaf, 0x7b, 0x7b, 0xaf, 0xbd, 0xc8,
614 /* 0xE8 */ 0xa4, 0xa5, 0xc7, 0xf6, 0xa7, 0xe8, 0x69, 0x69,
615 /* 0xF0 */ 0xed, 0x7d, 0xa8, 0xe4, 0xec, 0x5c, 0x5c, 0x25,
616 /* 0xF8 */ 0xac, 0xa6, 0xea, 0xef, 0x7e, 0xeb, 0xb2, 0x79,
619 static const char old_keypad_profile
[][4][9] = {
620 {"S0", "Left\n", "Left\n", ""},
621 {"S1", "Down\n", "Down\n", ""},
622 {"S2", "Up\n", "Up\n", ""},
623 {"S3", "Right\n", "Right\n", ""},
624 {"S4", "Esc\n", "Esc\n", ""},
625 {"S5", "Ret\n", "Ret\n", ""},
629 /* signals, press, repeat, release */
630 static const char new_keypad_profile
[][4][9] = {
631 {"S0", "Left\n", "Left\n", ""},
632 {"S1", "Down\n", "Down\n", ""},
633 {"S2", "Up\n", "Up\n", ""},
634 {"S3", "Right\n", "Right\n", ""},
635 {"S4s5", "", "Esc\n", "Esc\n"},
636 {"s4S5", "", "Ret\n", "Ret\n"},
637 {"S4S5", "Help\n", "", ""},
638 /* add new signals above this line */
642 /* signals, press, repeat, release */
643 static const char nexcom_keypad_profile
[][4][9] = {
644 {"a-p-e-", "Down\n", "Down\n", ""},
645 {"a-p-E-", "Ret\n", "Ret\n", ""},
646 {"a-P-E-", "Esc\n", "Esc\n", ""},
647 {"a-P-e-", "Up\n", "Up\n", ""},
648 /* add new signals above this line */
652 static const char (*keypad_profile
)[4][9] = old_keypad_profile
;
654 /* FIXME: this should be converted to a bit array containing signals states */
656 unsigned char e
; /* parallel LCD E (data latch on falling edge) */
657 unsigned char rs
; /* parallel LCD RS (0 = cmd, 1 = data) */
658 unsigned char rw
; /* parallel LCD R/W (0 = W, 1 = R) */
659 unsigned char bl
; /* parallel LCD backlight (0 = off, 1 = on) */
660 unsigned char cl
; /* serial LCD clock (latch on rising edge) */
661 unsigned char da
; /* serial LCD data */
664 static void init_scan_timer(void);
666 /* sets data port bits according to current signals values */
667 static int set_data_bits(void)
672 for (bit
= 0; bit
< LCD_BITS
; bit
++)
673 val
&= lcd_bits
[LCD_PORT_D
][bit
][BIT_MSK
];
675 val
|= lcd_bits
[LCD_PORT_D
][LCD_BIT_E
][bits
.e
]
676 | lcd_bits
[LCD_PORT_D
][LCD_BIT_RS
][bits
.rs
]
677 | lcd_bits
[LCD_PORT_D
][LCD_BIT_RW
][bits
.rw
]
678 | lcd_bits
[LCD_PORT_D
][LCD_BIT_BL
][bits
.bl
]
679 | lcd_bits
[LCD_PORT_D
][LCD_BIT_CL
][bits
.cl
]
680 | lcd_bits
[LCD_PORT_D
][LCD_BIT_DA
][bits
.da
];
686 /* sets ctrl port bits according to current signals values */
687 static int set_ctrl_bits(void)
692 for (bit
= 0; bit
< LCD_BITS
; bit
++)
693 val
&= lcd_bits
[LCD_PORT_C
][bit
][BIT_MSK
];
695 val
|= lcd_bits
[LCD_PORT_C
][LCD_BIT_E
][bits
.e
]
696 | lcd_bits
[LCD_PORT_C
][LCD_BIT_RS
][bits
.rs
]
697 | lcd_bits
[LCD_PORT_C
][LCD_BIT_RW
][bits
.rw
]
698 | lcd_bits
[LCD_PORT_C
][LCD_BIT_BL
][bits
.bl
]
699 | lcd_bits
[LCD_PORT_C
][LCD_BIT_CL
][bits
.cl
]
700 | lcd_bits
[LCD_PORT_C
][LCD_BIT_DA
][bits
.da
];
706 /* sets ctrl & data port bits according to current signals values */
707 static void panel_set_bits(void)
714 * Converts a parallel port pin (from -25 to 25) to data and control ports
715 * masks, and data and control port bits. The signal will be considered
716 * unconnected if it's on pin 0 or an invalid pin (<-25 or >25).
718 * Result will be used this way :
719 * out(dport, in(dport) & d_val[2] | d_val[signal_state])
720 * out(cport, in(cport) & c_val[2] | c_val[signal_state])
722 static void pin_to_bits(int pin
, unsigned char *d_val
, unsigned char *c_val
)
724 int d_bit
, c_bit
, inv
;
744 case PIN_STROBE
: /* strobe, inverted */
748 case PIN_D0
...PIN_D7
: /* D0 - D7 = 2 - 9 */
749 d_bit
= 1 << (pin
- 2);
751 case PIN_AUTOLF
: /* autofeed, inverted */
755 case PIN_INITP
: /* init, direct */
758 case PIN_SELECP
: /* select_in, inverted */
762 default: /* unknown pin, ignore */
775 /* sleeps that many milliseconds with a reschedule */
776 static void long_sleep(int ms
)
781 schedule_timeout_interruptible(msecs_to_jiffies(ms
));
785 * send a serial byte to the LCD panel. The caller is responsible for locking
788 static void lcd_send_serial(int byte
)
793 * the data bit is set on D0, and the clock on STROBE.
794 * LCD reads D0 on STROBE's rising edge.
796 for (bit
= 0; bit
< 8; bit
++) {
797 bits
.cl
= BIT_CLR
; /* CLK low */
801 udelay(2); /* maintain the data during 2 us before CLK up */
802 bits
.cl
= BIT_SET
; /* CLK high */
804 udelay(1); /* maintain the strobe during 1 us */
809 /* turn the backlight on or off */
810 static void lcd_backlight(int on
)
812 if (lcd
.pins
.bl
== PIN_NONE
)
815 /* The backlight is activated by setting the AUTOFEED line to +5V */
816 spin_lock_irq(&pprt_lock
);
819 spin_unlock_irq(&pprt_lock
);
822 /* send a command to the LCD panel in serial mode */
823 static void lcd_write_cmd_s(int cmd
)
825 spin_lock_irq(&pprt_lock
);
826 lcd_send_serial(0x1F); /* R/W=W, RS=0 */
827 lcd_send_serial(cmd
& 0x0F);
828 lcd_send_serial((cmd
>> 4) & 0x0F);
829 udelay(40); /* the shortest command takes at least 40 us */
830 spin_unlock_irq(&pprt_lock
);
833 /* send data to the LCD panel in serial mode */
834 static void lcd_write_data_s(int data
)
836 spin_lock_irq(&pprt_lock
);
837 lcd_send_serial(0x5F); /* R/W=W, RS=1 */
838 lcd_send_serial(data
& 0x0F);
839 lcd_send_serial((data
>> 4) & 0x0F);
840 udelay(40); /* the shortest data takes at least 40 us */
841 spin_unlock_irq(&pprt_lock
);
844 /* send a command to the LCD panel in 8 bits parallel mode */
845 static void lcd_write_cmd_p8(int cmd
)
847 spin_lock_irq(&pprt_lock
);
848 /* present the data to the data port */
850 udelay(20); /* maintain the data during 20 us before the strobe */
857 udelay(40); /* maintain the strobe during 40 us */
862 udelay(120); /* the shortest command takes at least 120 us */
863 spin_unlock_irq(&pprt_lock
);
866 /* send data to the LCD panel in 8 bits parallel mode */
867 static void lcd_write_data_p8(int data
)
869 spin_lock_irq(&pprt_lock
);
870 /* present the data to the data port */
872 udelay(20); /* maintain the data during 20 us before the strobe */
879 udelay(40); /* maintain the strobe during 40 us */
884 udelay(45); /* the shortest data takes at least 45 us */
885 spin_unlock_irq(&pprt_lock
);
888 /* send a command to the TI LCD panel */
889 static void lcd_write_cmd_tilcd(int cmd
)
891 spin_lock_irq(&pprt_lock
);
892 /* present the data to the control port */
895 spin_unlock_irq(&pprt_lock
);
898 /* send data to the TI LCD panel */
899 static void lcd_write_data_tilcd(int data
)
901 spin_lock_irq(&pprt_lock
);
902 /* present the data to the data port */
905 spin_unlock_irq(&pprt_lock
);
908 static void lcd_gotoxy(void)
910 lcd_write_cmd(LCD_CMD_SET_DDRAM_ADDR
911 | (lcd
.addr
.y
? lcd
.hwidth
: 0)
912 /* we force the cursor to stay at the end of the
913 line if it wants to go farther */
914 | ((lcd
.addr
.x
< lcd
.bwidth
) ? lcd
.addr
.x
&
915 (lcd
.hwidth
- 1) : lcd
.bwidth
- 1));
918 static void lcd_print(char c
)
920 if (lcd
.addr
.x
< lcd
.bwidth
) {
921 if (lcd_char_conv
!= NULL
)
922 c
= lcd_char_conv
[(unsigned char)c
];
926 /* prevents the cursor from wrapping onto the next line */
927 if (lcd
.addr
.x
== lcd
.bwidth
)
931 /* fills the display with spaces and resets X/Y */
932 static void lcd_clear_fast_s(void)
940 spin_lock_irq(&pprt_lock
);
941 for (pos
= 0; pos
< lcd
.height
* lcd
.hwidth
; pos
++) {
942 lcd_send_serial(0x5F); /* R/W=W, RS=1 */
943 lcd_send_serial(' ' & 0x0F);
944 lcd_send_serial((' ' >> 4) & 0x0F);
945 udelay(40); /* the shortest data takes at least 40 us */
947 spin_unlock_irq(&pprt_lock
);
954 /* fills the display with spaces and resets X/Y */
955 static void lcd_clear_fast_p8(void)
963 spin_lock_irq(&pprt_lock
);
964 for (pos
= 0; pos
< lcd
.height
* lcd
.hwidth
; pos
++) {
965 /* present the data to the data port */
968 /* maintain the data during 20 us before the strobe */
976 /* maintain the strobe during 40 us */
982 /* the shortest data takes at least 45 us */
985 spin_unlock_irq(&pprt_lock
);
992 /* fills the display with spaces and resets X/Y */
993 static void lcd_clear_fast_tilcd(void)
1001 spin_lock_irq(&pprt_lock
);
1002 for (pos
= 0; pos
< lcd
.height
* lcd
.hwidth
; pos
++) {
1003 /* present the data to the data port */
1008 spin_unlock_irq(&pprt_lock
);
1015 /* clears the display and resets X/Y */
1016 static void lcd_clear_display(void)
1018 lcd_write_cmd(LCD_CMD_DISPLAY_CLEAR
);
1021 /* we must wait a few milliseconds (15) */
1025 static void lcd_init_display(void)
1027 lcd
.flags
= ((lcd
.height
> 1) ? LCD_FLAG_N
: 0)
1028 | LCD_FLAG_D
| LCD_FLAG_C
| LCD_FLAG_B
;
1030 long_sleep(20); /* wait 20 ms after power-up for the paranoid */
1032 /* 8bits, 1 line, small fonts; let's do it 3 times */
1033 lcd_write_cmd(LCD_CMD_FUNCTION_SET
| LCD_CMD_DATA_LEN_8BITS
);
1035 lcd_write_cmd(LCD_CMD_FUNCTION_SET
| LCD_CMD_DATA_LEN_8BITS
);
1037 lcd_write_cmd(LCD_CMD_FUNCTION_SET
| LCD_CMD_DATA_LEN_8BITS
);
1040 /* set font height and lines number */
1041 lcd_write_cmd(LCD_CMD_FUNCTION_SET
| LCD_CMD_DATA_LEN_8BITS
1042 | ((lcd
.flags
& LCD_FLAG_F
) ? LCD_CMD_FONT_5X10_DOTS
: 0)
1043 | ((lcd
.flags
& LCD_FLAG_N
) ? LCD_CMD_TWO_LINES
: 0)
1047 /* display off, cursor off, blink off */
1048 lcd_write_cmd(LCD_CMD_DISPLAY_CTRL
);
1051 lcd_write_cmd(LCD_CMD_DISPLAY_CTRL
/* set display mode */
1052 | ((lcd
.flags
& LCD_FLAG_D
) ? LCD_CMD_DISPLAY_ON
: 0)
1053 | ((lcd
.flags
& LCD_FLAG_C
) ? LCD_CMD_CURSOR_ON
: 0)
1054 | ((lcd
.flags
& LCD_FLAG_B
) ? LCD_CMD_BLINK_ON
: 0)
1057 lcd_backlight((lcd
.flags
& LCD_FLAG_L
) ? 1 : 0);
1061 /* entry mode set : increment, cursor shifting */
1062 lcd_write_cmd(LCD_CMD_ENTRY_MODE
| LCD_CMD_CURSOR_INC
);
1064 lcd_clear_display();
1068 * These are the file operation function for user access to /dev/lcd
1069 * This function can also be called from inside the kernel, by
1070 * setting file and ppos to NULL.
1074 static inline int handle_lcd_special_code(void)
1076 /* LCD special codes */
1080 char *esc
= lcd
.esc_seq
.buf
+ 2;
1081 int oldflags
= lcd
.flags
;
1083 /* check for display mode flags */
1085 case 'D': /* Display ON */
1086 lcd
.flags
|= LCD_FLAG_D
;
1089 case 'd': /* Display OFF */
1090 lcd
.flags
&= ~LCD_FLAG_D
;
1093 case 'C': /* Cursor ON */
1094 lcd
.flags
|= LCD_FLAG_C
;
1097 case 'c': /* Cursor OFF */
1098 lcd
.flags
&= ~LCD_FLAG_C
;
1101 case 'B': /* Blink ON */
1102 lcd
.flags
|= LCD_FLAG_B
;
1105 case 'b': /* Blink OFF */
1106 lcd
.flags
&= ~LCD_FLAG_B
;
1109 case '+': /* Back light ON */
1110 lcd
.flags
|= LCD_FLAG_L
;
1113 case '-': /* Back light OFF */
1114 lcd
.flags
&= ~LCD_FLAG_L
;
1118 /* flash back light using the keypad timer */
1119 if (scan_timer
.function
!= NULL
) {
1120 if (lcd
.light_tempo
== 0
1121 && ((lcd
.flags
& LCD_FLAG_L
) == 0))
1123 lcd
.light_tempo
= FLASH_LIGHT_TEMPO
;
1127 case 'f': /* Small Font */
1128 lcd
.flags
&= ~LCD_FLAG_F
;
1131 case 'F': /* Large Font */
1132 lcd
.flags
|= LCD_FLAG_F
;
1135 case 'n': /* One Line */
1136 lcd
.flags
&= ~LCD_FLAG_N
;
1139 case 'N': /* Two Lines */
1140 lcd
.flags
|= LCD_FLAG_N
;
1142 case 'l': /* Shift Cursor Left */
1143 if (lcd
.addr
.x
> 0) {
1144 /* back one char if not at end of line */
1145 if (lcd
.addr
.x
< lcd
.bwidth
)
1146 lcd_write_cmd(LCD_CMD_SHIFT
);
1151 case 'r': /* shift cursor right */
1152 if (lcd
.addr
.x
< lcd
.width
) {
1153 /* allow the cursor to pass the end of the line */
1154 if (lcd
.addr
.x
< (lcd
.bwidth
- 1))
1155 lcd_write_cmd(LCD_CMD_SHIFT
|
1156 LCD_CMD_SHIFT_RIGHT
);
1161 case 'L': /* shift display left */
1162 lcd_write_cmd(LCD_CMD_SHIFT
| LCD_CMD_DISPLAY_SHIFT
);
1165 case 'R': /* shift display right */
1166 lcd_write_cmd(LCD_CMD_SHIFT
| LCD_CMD_DISPLAY_SHIFT
|
1167 LCD_CMD_SHIFT_RIGHT
);
1170 case 'k': { /* kill end of line */
1173 for (x
= lcd
.addr
.x
; x
< lcd
.bwidth
; x
++)
1174 lcd_write_data(' ');
1176 /* restore cursor position */
1181 case 'I': /* reinitialize display */
1186 /* Generator : LGcxxxxx...xx; must have <c> between '0'
1187 * and '7', representing the numerical ASCII code of the
1188 * redefined character, and <xx...xx> a sequence of 16
1189 * hex digits representing 8 bytes for each character.
1190 * Most LCDs will only use 5 lower bits of the 7 first
1194 unsigned char cgbytes
[8];
1195 unsigned char cgaddr
;
1201 if (strchr(esc
, ';') == NULL
)
1206 cgaddr
= *(esc
++) - '0';
1215 while (*esc
&& cgoffset
< 8) {
1217 if (*esc
>= '0' && *esc
<= '9') {
1218 value
|= (*esc
- '0') << shift
;
1219 } else if (*esc
>= 'A' && *esc
<= 'Z') {
1220 value
|= (*esc
- 'A' + 10) << shift
;
1221 } else if (*esc
>= 'a' && *esc
<= 'z') {
1222 value
|= (*esc
- 'a' + 10) << shift
;
1229 cgbytes
[cgoffset
++] = value
;
1236 lcd_write_cmd(LCD_CMD_SET_CGRAM_ADDR
| (cgaddr
* 8));
1237 for (addr
= 0; addr
< cgoffset
; addr
++)
1238 lcd_write_data(cgbytes
[addr
]);
1240 /* ensures that we stop writing to CGRAM */
1245 case 'x': /* gotoxy : LxXXX[yYYY]; */
1246 case 'y': /* gotoxy : LyYYY[xXXX]; */
1247 if (strchr(esc
, ';') == NULL
)
1253 if (kstrtoul(esc
, 10, &lcd
.addr
.x
) < 0)
1255 } else if (*esc
== 'y') {
1257 if (kstrtoul(esc
, 10, &lcd
.addr
.y
) < 0)
1269 /* TODO: This indent party here got ugly, clean it! */
1270 /* Check whether one flag was changed */
1271 if (oldflags
!= lcd
.flags
) {
1272 /* check whether one of B,C,D flags were changed */
1273 if ((oldflags
^ lcd
.flags
) &
1274 (LCD_FLAG_B
| LCD_FLAG_C
| LCD_FLAG_D
))
1275 /* set display mode */
1276 lcd_write_cmd(LCD_CMD_DISPLAY_CTRL
1277 | ((lcd
.flags
& LCD_FLAG_D
)
1278 ? LCD_CMD_DISPLAY_ON
: 0)
1279 | ((lcd
.flags
& LCD_FLAG_C
)
1280 ? LCD_CMD_CURSOR_ON
: 0)
1281 | ((lcd
.flags
& LCD_FLAG_B
)
1282 ? LCD_CMD_BLINK_ON
: 0));
1283 /* check whether one of F,N flags was changed */
1284 else if ((oldflags
^ lcd
.flags
) & (LCD_FLAG_F
| LCD_FLAG_N
))
1285 lcd_write_cmd(LCD_CMD_FUNCTION_SET
1286 | LCD_CMD_DATA_LEN_8BITS
1287 | ((lcd
.flags
& LCD_FLAG_F
)
1288 ? LCD_CMD_TWO_LINES
: 0)
1289 | ((lcd
.flags
& LCD_FLAG_N
)
1290 ? LCD_CMD_FONT_5X10_DOTS
1292 /* check whether L flag was changed */
1293 else if ((oldflags
^ lcd
.flags
) & (LCD_FLAG_L
)) {
1294 if (lcd
.flags
& (LCD_FLAG_L
))
1296 else if (lcd
.light_tempo
== 0)
1297 /* switch off the light only when the tempo
1306 static void lcd_write_char(char c
)
1308 /* first, we'll test if we're in escape mode */
1309 if ((c
!= '\n') && lcd
.esc_seq
.len
>= 0) {
1310 /* yes, let's add this char to the buffer */
1311 lcd
.esc_seq
.buf
[lcd
.esc_seq
.len
++] = c
;
1312 lcd
.esc_seq
.buf
[lcd
.esc_seq
.len
] = 0;
1314 /* aborts any previous escape sequence */
1315 lcd
.esc_seq
.len
= -1;
1318 case LCD_ESCAPE_CHAR
:
1319 /* start of an escape sequence */
1320 lcd
.esc_seq
.len
= 0;
1321 lcd
.esc_seq
.buf
[lcd
.esc_seq
.len
] = 0;
1324 /* go back one char and clear it */
1325 if (lcd
.addr
.x
> 0) {
1326 /* check if we're not at the
1328 if (lcd
.addr
.x
< lcd
.bwidth
)
1330 lcd_write_cmd(LCD_CMD_SHIFT
);
1333 /* replace with a space */
1334 lcd_write_data(' ');
1335 /* back one char again */
1336 lcd_write_cmd(LCD_CMD_SHIFT
);
1339 /* quickly clear the display */
1343 /* flush the remainder of the current line and
1344 go to the beginning of the next line */
1345 for (; lcd
.addr
.x
< lcd
.bwidth
; lcd
.addr
.x
++)
1346 lcd_write_data(' ');
1348 lcd
.addr
.y
= (lcd
.addr
.y
+ 1) % lcd
.height
;
1352 /* go to the beginning of the same line */
1357 /* print a space instead of the tab */
1361 /* simply print this char */
1367 /* now we'll see if we're in an escape mode and if the current
1368 escape sequence can be understood. */
1369 if (lcd
.esc_seq
.len
>= 2) {
1372 if (!strcmp(lcd
.esc_seq
.buf
, "[2J")) {
1373 /* clear the display */
1376 } else if (!strcmp(lcd
.esc_seq
.buf
, "[H")) {
1377 /* cursor to home */
1383 /* codes starting with ^[[L */
1384 else if ((lcd
.esc_seq
.len
>= 3) &&
1385 (lcd
.esc_seq
.buf
[0] == '[') &&
1386 (lcd
.esc_seq
.buf
[1] == 'L')) {
1387 processed
= handle_lcd_special_code();
1390 /* LCD special escape codes */
1391 /* flush the escape sequence if it's been processed
1392 or if it is getting too long. */
1393 if (processed
|| (lcd
.esc_seq
.len
>= LCD_ESCAPE_LEN
))
1394 lcd
.esc_seq
.len
= -1;
1395 } /* escape codes */
1398 static ssize_t
lcd_write(struct file
*file
,
1399 const char __user
*buf
, size_t count
, loff_t
*ppos
)
1401 const char __user
*tmp
= buf
;
1404 for (; count
-- > 0; (*ppos
)++, tmp
++) {
1405 if (!in_interrupt() && (((count
+ 1) & 0x1f) == 0))
1406 /* let's be a little nice with other processes
1407 that need some CPU */
1410 if (get_user(c
, tmp
))
1419 static int lcd_open(struct inode
*inode
, struct file
*file
)
1421 if (!atomic_dec_and_test(&lcd_available
))
1422 return -EBUSY
; /* open only once at a time */
1424 if (file
->f_mode
& FMODE_READ
) /* device is write-only */
1427 if (lcd
.must_clear
) {
1428 lcd_clear_display();
1429 lcd
.must_clear
= false;
1431 return nonseekable_open(inode
, file
);
1434 static int lcd_release(struct inode
*inode
, struct file
*file
)
1436 atomic_inc(&lcd_available
);
1440 static const struct file_operations lcd_fops
= {
1443 .release
= lcd_release
,
1444 .llseek
= no_llseek
,
1447 static struct miscdevice lcd_dev
= {
1453 /* public function usable from the kernel for any purpose */
1454 static void panel_lcd_print(const char *s
)
1456 const char *tmp
= s
;
1457 int count
= strlen(s
);
1459 if (lcd
.enabled
&& lcd
.initialized
) {
1460 for (; count
-- > 0; tmp
++) {
1461 if (!in_interrupt() && (((count
+ 1) & 0x1f) == 0))
1462 /* let's be a little nice with other processes
1463 that need some CPU */
1466 lcd_write_char(*tmp
);
1471 /* initialize the LCD driver */
1472 static void lcd_init(void)
1474 switch (selected_lcd_type
) {
1476 /* parallel mode, 8 bits */
1477 lcd
.proto
= LCD_PROTO_PARALLEL
;
1478 lcd
.charset
= LCD_CHARSET_NORMAL
;
1479 lcd
.pins
.e
= PIN_STROBE
;
1480 lcd
.pins
.rs
= PIN_AUTOLF
;
1487 case LCD_TYPE_KS0074
:
1488 /* serial mode, ks0074 */
1489 lcd
.proto
= LCD_PROTO_SERIAL
;
1490 lcd
.charset
= LCD_CHARSET_KS0074
;
1491 lcd
.pins
.bl
= PIN_AUTOLF
;
1492 lcd
.pins
.cl
= PIN_STROBE
;
1493 lcd
.pins
.da
= PIN_D0
;
1500 case LCD_TYPE_NEXCOM
:
1501 /* parallel mode, 8 bits, generic */
1502 lcd
.proto
= LCD_PROTO_PARALLEL
;
1503 lcd
.charset
= LCD_CHARSET_NORMAL
;
1504 lcd
.pins
.e
= PIN_AUTOLF
;
1505 lcd
.pins
.rs
= PIN_SELECP
;
1506 lcd
.pins
.rw
= PIN_INITP
;
1513 case LCD_TYPE_CUSTOM
:
1514 /* customer-defined */
1515 lcd
.proto
= DEFAULT_LCD_PROTO
;
1516 lcd
.charset
= DEFAULT_LCD_CHARSET
;
1517 /* default geometry will be set later */
1519 case LCD_TYPE_HANTRONIX
:
1520 /* parallel mode, 8 bits, hantronix-like */
1522 lcd
.proto
= LCD_PROTO_PARALLEL
;
1523 lcd
.charset
= LCD_CHARSET_NORMAL
;
1524 lcd
.pins
.e
= PIN_STROBE
;
1525 lcd
.pins
.rs
= PIN_SELECP
;
1534 /* Overwrite with module params set on loading */
1535 if (lcd_height
!= NOT_SET
)
1536 lcd
.height
= lcd_height
;
1537 if (lcd_width
!= NOT_SET
)
1538 lcd
.width
= lcd_width
;
1539 if (lcd_bwidth
!= NOT_SET
)
1540 lcd
.bwidth
= lcd_bwidth
;
1541 if (lcd_hwidth
!= NOT_SET
)
1542 lcd
.hwidth
= lcd_hwidth
;
1543 if (lcd_charset
!= NOT_SET
)
1544 lcd
.charset
= lcd_charset
;
1545 if (lcd_proto
!= NOT_SET
)
1546 lcd
.proto
= lcd_proto
;
1547 if (lcd_e_pin
!= PIN_NOT_SET
)
1548 lcd
.pins
.e
= lcd_e_pin
;
1549 if (lcd_rs_pin
!= PIN_NOT_SET
)
1550 lcd
.pins
.rs
= lcd_rs_pin
;
1551 if (lcd_rw_pin
!= PIN_NOT_SET
)
1552 lcd
.pins
.rw
= lcd_rw_pin
;
1553 if (lcd_cl_pin
!= PIN_NOT_SET
)
1554 lcd
.pins
.cl
= lcd_cl_pin
;
1555 if (lcd_da_pin
!= PIN_NOT_SET
)
1556 lcd
.pins
.da
= lcd_da_pin
;
1557 if (lcd_bl_pin
!= PIN_NOT_SET
)
1558 lcd
.pins
.bl
= lcd_bl_pin
;
1560 /* this is used to catch wrong and default values */
1562 lcd
.width
= DEFAULT_LCD_WIDTH
;
1563 if (lcd
.bwidth
<= 0)
1564 lcd
.bwidth
= DEFAULT_LCD_BWIDTH
;
1565 if (lcd
.hwidth
<= 0)
1566 lcd
.hwidth
= DEFAULT_LCD_HWIDTH
;
1567 if (lcd
.height
<= 0)
1568 lcd
.height
= DEFAULT_LCD_HEIGHT
;
1570 if (lcd
.proto
== LCD_PROTO_SERIAL
) { /* SERIAL */
1571 lcd_write_cmd
= lcd_write_cmd_s
;
1572 lcd_write_data
= lcd_write_data_s
;
1573 lcd_clear_fast
= lcd_clear_fast_s
;
1575 if (lcd
.pins
.cl
== PIN_NOT_SET
)
1576 lcd
.pins
.cl
= DEFAULT_LCD_PIN_SCL
;
1577 if (lcd
.pins
.da
== PIN_NOT_SET
)
1578 lcd
.pins
.da
= DEFAULT_LCD_PIN_SDA
;
1580 } else if (lcd
.proto
== LCD_PROTO_PARALLEL
) { /* PARALLEL */
1581 lcd_write_cmd
= lcd_write_cmd_p8
;
1582 lcd_write_data
= lcd_write_data_p8
;
1583 lcd_clear_fast
= lcd_clear_fast_p8
;
1585 if (lcd
.pins
.e
== PIN_NOT_SET
)
1586 lcd
.pins
.e
= DEFAULT_LCD_PIN_E
;
1587 if (lcd
.pins
.rs
== PIN_NOT_SET
)
1588 lcd
.pins
.rs
= DEFAULT_LCD_PIN_RS
;
1589 if (lcd
.pins
.rw
== PIN_NOT_SET
)
1590 lcd
.pins
.rw
= DEFAULT_LCD_PIN_RW
;
1592 lcd_write_cmd
= lcd_write_cmd_tilcd
;
1593 lcd_write_data
= lcd_write_data_tilcd
;
1594 lcd_clear_fast
= lcd_clear_fast_tilcd
;
1597 if (lcd
.pins
.bl
== PIN_NOT_SET
)
1598 lcd
.pins
.bl
= DEFAULT_LCD_PIN_BL
;
1600 if (lcd
.pins
.e
== PIN_NOT_SET
)
1601 lcd
.pins
.e
= PIN_NONE
;
1602 if (lcd
.pins
.rs
== PIN_NOT_SET
)
1603 lcd
.pins
.rs
= PIN_NONE
;
1604 if (lcd
.pins
.rw
== PIN_NOT_SET
)
1605 lcd
.pins
.rw
= PIN_NONE
;
1606 if (lcd
.pins
.bl
== PIN_NOT_SET
)
1607 lcd
.pins
.bl
= PIN_NONE
;
1608 if (lcd
.pins
.cl
== PIN_NOT_SET
)
1609 lcd
.pins
.cl
= PIN_NONE
;
1610 if (lcd
.pins
.da
== PIN_NOT_SET
)
1611 lcd
.pins
.da
= PIN_NONE
;
1613 if (lcd
.charset
== NOT_SET
)
1614 lcd
.charset
= DEFAULT_LCD_CHARSET
;
1616 if (lcd
.charset
== LCD_CHARSET_KS0074
)
1617 lcd_char_conv
= lcd_char_conv_ks0074
;
1619 lcd_char_conv
= NULL
;
1621 if (lcd
.pins
.bl
!= PIN_NONE
)
1624 pin_to_bits(lcd
.pins
.e
, lcd_bits
[LCD_PORT_D
][LCD_BIT_E
],
1625 lcd_bits
[LCD_PORT_C
][LCD_BIT_E
]);
1626 pin_to_bits(lcd
.pins
.rs
, lcd_bits
[LCD_PORT_D
][LCD_BIT_RS
],
1627 lcd_bits
[LCD_PORT_C
][LCD_BIT_RS
]);
1628 pin_to_bits(lcd
.pins
.rw
, lcd_bits
[LCD_PORT_D
][LCD_BIT_RW
],
1629 lcd_bits
[LCD_PORT_C
][LCD_BIT_RW
]);
1630 pin_to_bits(lcd
.pins
.bl
, lcd_bits
[LCD_PORT_D
][LCD_BIT_BL
],
1631 lcd_bits
[LCD_PORT_C
][LCD_BIT_BL
]);
1632 pin_to_bits(lcd
.pins
.cl
, lcd_bits
[LCD_PORT_D
][LCD_BIT_CL
],
1633 lcd_bits
[LCD_PORT_C
][LCD_BIT_CL
]);
1634 pin_to_bits(lcd
.pins
.da
, lcd_bits
[LCD_PORT_D
][LCD_BIT_DA
],
1635 lcd_bits
[LCD_PORT_C
][LCD_BIT_DA
]);
1637 /* before this line, we must NOT send anything to the display.
1638 * Since lcd_init_display() needs to write data, we have to
1639 * enable mark the LCD initialized just before. */
1640 lcd
.initialized
= true;
1643 /* display a short message */
1644 #ifdef CONFIG_PANEL_CHANGE_MESSAGE
1645 #ifdef CONFIG_PANEL_BOOT_MESSAGE
1646 panel_lcd_print("\x1b[Lc\x1b[Lb\x1b[L*" CONFIG_PANEL_BOOT_MESSAGE
);
1649 panel_lcd_print("\x1b[Lc\x1b[Lb\x1b[L*Linux-" UTS_RELEASE
"\nPanel-"
1654 /* clear the display on the next device opening */
1655 lcd
.must_clear
= true;
1660 * These are the file operation function for user access to /dev/keypad
1663 static ssize_t
keypad_read(struct file
*file
,
1664 char __user
*buf
, size_t count
, loff_t
*ppos
)
1667 char __user
*tmp
= buf
;
1669 if (keypad_buflen
== 0) {
1670 if (file
->f_flags
& O_NONBLOCK
)
1673 if (wait_event_interruptible(keypad_read_wait
,
1674 keypad_buflen
!= 0))
1678 for (; count
-- > 0 && (keypad_buflen
> 0);
1679 ++i
, ++tmp
, --keypad_buflen
) {
1680 put_user(keypad_buffer
[keypad_start
], tmp
);
1681 keypad_start
= (keypad_start
+ 1) % KEYPAD_BUFFER
;
1688 static int keypad_open(struct inode
*inode
, struct file
*file
)
1690 if (!atomic_dec_and_test(&keypad_available
))
1691 return -EBUSY
; /* open only once at a time */
1693 if (file
->f_mode
& FMODE_WRITE
) /* device is read-only */
1696 keypad_buflen
= 0; /* flush the buffer on opening */
1700 static int keypad_release(struct inode
*inode
, struct file
*file
)
1702 atomic_inc(&keypad_available
);
1706 static const struct file_operations keypad_fops
= {
1707 .read
= keypad_read
, /* read */
1708 .open
= keypad_open
, /* open */
1709 .release
= keypad_release
, /* close */
1710 .llseek
= default_llseek
,
1713 static struct miscdevice keypad_dev
= {
1714 .minor
= KEYPAD_MINOR
,
1716 .fops
= &keypad_fops
,
1719 static void keypad_send_key(const char *string
, int max_len
)
1721 /* send the key to the device only if a process is attached to it. */
1722 if (!atomic_read(&keypad_available
)) {
1723 while (max_len
-- && keypad_buflen
< KEYPAD_BUFFER
&& *string
) {
1724 keypad_buffer
[(keypad_start
+ keypad_buflen
++) %
1725 KEYPAD_BUFFER
] = *string
++;
1727 wake_up_interruptible(&keypad_read_wait
);
1731 /* this function scans all the bits involving at least one logical signal,
1732 * and puts the results in the bitfield "phys_read" (one bit per established
1733 * contact), and sets "phys_read_prev" to "phys_read".
1735 * Note: to debounce input signals, we will only consider as switched a signal
1736 * which is stable across 2 measures. Signals which are different between two
1737 * reads will be kept as they previously were in their logical form (phys_prev).
1738 * A signal which has just switched will have a 1 in
1739 * (phys_read ^ phys_read_prev).
1741 static void phys_scan_contacts(void)
1748 phys_prev
= phys_curr
;
1749 phys_read_prev
= phys_read
;
1750 phys_read
= 0; /* flush all signals */
1752 /* keep track of old value, with all outputs disabled */
1753 oldval
= r_dtr(pprt
) | scan_mask_o
;
1754 /* activate all keyboard outputs (active low) */
1755 w_dtr(pprt
, oldval
& ~scan_mask_o
);
1757 /* will have a 1 for each bit set to gnd */
1758 bitmask
= PNL_PINPUT(r_str(pprt
)) & scan_mask_i
;
1759 /* disable all matrix signals */
1760 w_dtr(pprt
, oldval
);
1762 /* now that all outputs are cleared, the only active input bits are
1763 * directly connected to the ground
1766 /* 1 for each grounded input */
1767 gndmask
= PNL_PINPUT(r_str(pprt
)) & scan_mask_i
;
1769 /* grounded inputs are signals 40-44 */
1770 phys_read
|= (pmask_t
) gndmask
<< 40;
1772 if (bitmask
!= gndmask
) {
1773 /* since clearing the outputs changed some inputs, we know
1774 * that some input signals are currently tied to some outputs.
1775 * So we'll scan them.
1777 for (bit
= 0; bit
< 8; bit
++) {
1780 if (!(scan_mask_o
& bitval
)) /* skip unused bits */
1783 w_dtr(pprt
, oldval
& ~bitval
); /* enable this output */
1784 bitmask
= PNL_PINPUT(r_str(pprt
)) & ~gndmask
;
1785 phys_read
|= (pmask_t
) bitmask
<< (5 * bit
);
1787 w_dtr(pprt
, oldval
); /* disable all outputs */
1789 /* this is easy: use old bits when they are flapping,
1790 * use new ones when stable */
1791 phys_curr
= (phys_prev
& (phys_read
^ phys_read_prev
)) |
1792 (phys_read
& ~(phys_read
^ phys_read_prev
));
1795 static inline int input_state_high(struct logical_input
*input
)
1799 * this is an invalid test. It tries to catch
1800 * transitions from single-key to multiple-key, but
1801 * doesn't take into account the contacts polarity.
1802 * The only solution to the problem is to parse keys
1803 * from the most complex to the simplest combinations,
1804 * and mark them as 'caught' once a combination
1805 * matches, then unmatch it for all other ones.
1808 /* try to catch dangerous transitions cases :
1809 * someone adds a bit, so this signal was a false
1810 * positive resulting from a transition. We should
1811 * invalidate the signal immediately and not call the
1813 * eg: 0 -(press A)-> A -(press B)-> AB : don't match A's release.
1815 if (((phys_prev
& input
->mask
) == input
->value
) &&
1816 ((phys_curr
& input
->mask
) > input
->value
)) {
1817 input
->state
= INPUT_ST_LOW
; /* invalidate */
1822 if ((phys_curr
& input
->mask
) == input
->value
) {
1823 if ((input
->type
== INPUT_TYPE_STD
) &&
1824 (input
->high_timer
== 0)) {
1825 input
->high_timer
++;
1826 if (input
->u
.std
.press_fct
!= NULL
)
1827 input
->u
.std
.press_fct(input
->u
.std
.press_data
);
1828 } else if (input
->type
== INPUT_TYPE_KBD
) {
1829 /* will turn on the light */
1832 if (input
->high_timer
== 0) {
1833 char *press_str
= input
->u
.kbd
.press_str
;
1836 int s
= sizeof(input
->u
.kbd
.press_str
);
1838 keypad_send_key(press_str
, s
);
1842 if (input
->u
.kbd
.repeat_str
[0]) {
1843 char *repeat_str
= input
->u
.kbd
.repeat_str
;
1845 if (input
->high_timer
>= KEYPAD_REP_START
) {
1846 int s
= sizeof(input
->u
.kbd
.repeat_str
);
1848 input
->high_timer
-= KEYPAD_REP_DELAY
;
1849 keypad_send_key(repeat_str
, s
);
1851 /* we will need to come back here soon */
1855 if (input
->high_timer
< 255)
1856 input
->high_timer
++;
1861 /* else signal falling down. Let's fall through. */
1862 input
->state
= INPUT_ST_FALLING
;
1863 input
->fall_timer
= 0;
1868 static inline void input_state_falling(struct logical_input
*input
)
1871 /* FIXME !!! same comment as in input_state_high */
1872 if (((phys_prev
& input
->mask
) == input
->value
) &&
1873 ((phys_curr
& input
->mask
) > input
->value
)) {
1874 input
->state
= INPUT_ST_LOW
; /* invalidate */
1879 if ((phys_curr
& input
->mask
) == input
->value
) {
1880 if (input
->type
== INPUT_TYPE_KBD
) {
1881 /* will turn on the light */
1884 if (input
->u
.kbd
.repeat_str
[0]) {
1885 char *repeat_str
= input
->u
.kbd
.repeat_str
;
1887 if (input
->high_timer
>= KEYPAD_REP_START
) {
1888 int s
= sizeof(input
->u
.kbd
.repeat_str
);
1890 input
->high_timer
-= KEYPAD_REP_DELAY
;
1891 keypad_send_key(repeat_str
, s
);
1893 /* we will need to come back here soon */
1897 if (input
->high_timer
< 255)
1898 input
->high_timer
++;
1900 input
->state
= INPUT_ST_HIGH
;
1901 } else if (input
->fall_timer
>= input
->fall_time
) {
1902 /* call release event */
1903 if (input
->type
== INPUT_TYPE_STD
) {
1904 void (*release_fct
)(int) = input
->u
.std
.release_fct
;
1906 if (release_fct
!= NULL
)
1907 release_fct(input
->u
.std
.release_data
);
1908 } else if (input
->type
== INPUT_TYPE_KBD
) {
1909 char *release_str
= input
->u
.kbd
.release_str
;
1911 if (release_str
[0]) {
1912 int s
= sizeof(input
->u
.kbd
.release_str
);
1914 keypad_send_key(release_str
, s
);
1918 input
->state
= INPUT_ST_LOW
;
1920 input
->fall_timer
++;
1925 static void panel_process_inputs(void)
1927 struct list_head
*item
;
1928 struct logical_input
*input
;
1932 list_for_each(item
, &logical_inputs
) {
1933 input
= list_entry(item
, struct logical_input
, list
);
1935 switch (input
->state
) {
1937 if ((phys_curr
& input
->mask
) != input
->value
)
1939 /* if all needed ones were already set previously,
1940 * this means that this logical signal has been
1941 * activated by the releasing of another combined
1942 * signal, so we don't want to match.
1943 * eg: AB -(release B)-> A -(release A)-> 0 :
1946 if ((phys_prev
& input
->mask
) == input
->value
)
1948 input
->rise_timer
= 0;
1949 input
->state
= INPUT_ST_RISING
;
1950 /* no break here, fall through */
1951 case INPUT_ST_RISING
:
1952 if ((phys_curr
& input
->mask
) != input
->value
) {
1953 input
->state
= INPUT_ST_LOW
;
1956 if (input
->rise_timer
< input
->rise_time
) {
1958 input
->rise_timer
++;
1961 input
->high_timer
= 0;
1962 input
->state
= INPUT_ST_HIGH
;
1963 /* no break here, fall through */
1965 if (input_state_high(input
))
1967 /* no break here, fall through */
1968 case INPUT_ST_FALLING
:
1969 input_state_falling(input
);
1974 static void panel_scan_timer(void)
1976 if (keypad
.enabled
&& keypad_initialized
) {
1977 if (spin_trylock_irq(&pprt_lock
)) {
1978 phys_scan_contacts();
1980 /* no need for the parport anymore */
1981 spin_unlock_irq(&pprt_lock
);
1984 if (!inputs_stable
|| phys_curr
!= phys_prev
)
1985 panel_process_inputs();
1988 if (lcd
.enabled
&& lcd
.initialized
) {
1990 if (lcd
.light_tempo
== 0
1991 && ((lcd
.flags
& LCD_FLAG_L
) == 0))
1993 lcd
.light_tempo
= FLASH_LIGHT_TEMPO
;
1994 } else if (lcd
.light_tempo
> 0) {
1996 if (lcd
.light_tempo
== 0
1997 && ((lcd
.flags
& LCD_FLAG_L
) == 0))
2002 mod_timer(&scan_timer
, jiffies
+ INPUT_POLL_TIME
);
2005 static void init_scan_timer(void)
2007 if (scan_timer
.function
!= NULL
)
2008 return; /* already started */
2010 setup_timer(&scan_timer
, (void *)&panel_scan_timer
, 0);
2011 scan_timer
.expires
= jiffies
+ INPUT_POLL_TIME
;
2012 add_timer(&scan_timer
);
2015 /* converts a name of the form "({BbAaPpSsEe}{01234567-})*" to a series of bits.
2016 * if <omask> or <imask> are non-null, they will be or'ed with the bits
2017 * corresponding to out and in bits respectively.
2018 * returns 1 if ok, 0 if error (in which case, nothing is written).
2020 static int input_name2mask(const char *name
, pmask_t
*mask
, pmask_t
*value
,
2021 char *imask
, char *omask
)
2023 static char sigtab
[10] = "EeSsPpAaBb";
2032 int in
, out
, bit
, neg
;
2034 for (in
= 0; (in
< sizeof(sigtab
)) && (sigtab
[in
] != *name
);
2038 if (in
>= sizeof(sigtab
))
2039 return 0; /* input name not found */
2040 neg
= (in
& 1); /* odd (lower) names are negated */
2045 if (isdigit(*name
)) {
2048 } else if (*name
== '-') {
2051 return 0; /* unknown bit name */
2054 bit
= (out
* 5) + in
;
2070 /* tries to bind a key to the signal name <name>. The key will send the
2071 * strings <press>, <repeat>, <release> for these respective events.
2072 * Returns the pointer to the new key if ok, NULL if the key could not be bound.
2074 static struct logical_input
*panel_bind_key(const char *name
, const char *press
,
2076 const char *release
)
2078 struct logical_input
*key
;
2080 key
= kzalloc(sizeof(*key
), GFP_KERNEL
);
2084 if (!input_name2mask(name
, &key
->mask
, &key
->value
, &scan_mask_i
,
2090 key
->type
= INPUT_TYPE_KBD
;
2091 key
->state
= INPUT_ST_LOW
;
2095 strncpy(key
->u
.kbd
.press_str
, press
, sizeof(key
->u
.kbd
.press_str
));
2096 strncpy(key
->u
.kbd
.repeat_str
, repeat
, sizeof(key
->u
.kbd
.repeat_str
));
2097 strncpy(key
->u
.kbd
.release_str
, release
,
2098 sizeof(key
->u
.kbd
.release_str
));
2099 list_add(&key
->list
, &logical_inputs
);
2104 /* tries to bind a callback function to the signal name <name>. The function
2105 * <press_fct> will be called with the <press_data> arg when the signal is
2106 * activated, and so on for <release_fct>/<release_data>
2107 * Returns the pointer to the new signal if ok, NULL if the signal could not
2110 static struct logical_input
*panel_bind_callback(char *name
,
2111 void (*press_fct
)(int),
2113 void (*release_fct
)(int),
2116 struct logical_input
*callback
;
2118 callback
= kmalloc(sizeof(*callback
), GFP_KERNEL
);
2122 memset(callback
, 0, sizeof(struct logical_input
));
2123 if (!input_name2mask(name
, &callback
->mask
, &callback
->value
,
2124 &scan_mask_i
, &scan_mask_o
))
2127 callback
->type
= INPUT_TYPE_STD
;
2128 callback
->state
= INPUT_ST_LOW
;
2129 callback
->rise_time
= 1;
2130 callback
->fall_time
= 1;
2131 callback
->u
.std
.press_fct
= press_fct
;
2132 callback
->u
.std
.press_data
= press_data
;
2133 callback
->u
.std
.release_fct
= release_fct
;
2134 callback
->u
.std
.release_data
= release_data
;
2135 list_add(&callback
->list
, &logical_inputs
);
2140 static void keypad_init(void)
2144 init_waitqueue_head(&keypad_read_wait
);
2145 keypad_buflen
= 0; /* flushes any eventual noisy keystroke */
2147 /* Let's create all known keys */
2149 for (keynum
= 0; keypad_profile
[keynum
][0][0]; keynum
++) {
2150 panel_bind_key(keypad_profile
[keynum
][0],
2151 keypad_profile
[keynum
][1],
2152 keypad_profile
[keynum
][2],
2153 keypad_profile
[keynum
][3]);
2157 keypad_initialized
= 1;
2160 /**************************************************/
2161 /* device initialization */
2162 /**************************************************/
2164 static int panel_notify_sys(struct notifier_block
*this, unsigned long code
,
2167 if (lcd
.enabled
&& lcd
.initialized
) {
2171 ("\x0cReloading\nSystem...\x1b[Lc\x1b[Lb\x1b[L+");
2175 ("\x0cSystem Halted.\x1b[Lc\x1b[Lb\x1b[L+");
2178 panel_lcd_print("\x0cPower off.\x1b[Lc\x1b[Lb\x1b[L+");
2187 static struct notifier_block panel_notifier
= {
2193 static void panel_attach(struct parport
*port
)
2195 struct pardev_cb panel_cb
;
2197 if (port
->number
!= parport
)
2201 pr_err("%s: port->number=%d parport=%d, already registered!\n",
2202 __func__
, port
->number
, parport
);
2206 memset(&panel_cb
, 0, sizeof(panel_cb
));
2207 panel_cb
.private = &pprt
;
2208 /* panel_cb.flags = 0 should be PARPORT_DEV_EXCL? */
2210 pprt
= parport_register_dev_model(port
, "panel", &panel_cb
, 0);
2212 pr_err("%s: port->number=%d parport=%d, parport_register_device() failed\n",
2213 __func__
, port
->number
, parport
);
2217 if (parport_claim(pprt
)) {
2218 pr_err("could not claim access to parport%d. Aborting.\n",
2220 goto err_unreg_device
;
2223 /* must init LCD first, just in case an IRQ from the keypad is
2224 * generated at keypad init
2228 if (misc_register(&lcd_dev
))
2229 goto err_unreg_device
;
2232 if (keypad
.enabled
) {
2234 if (misc_register(&keypad_dev
))
2237 register_reboot_notifier(&panel_notifier
);
2242 misc_deregister(&lcd_dev
);
2244 parport_unregister_device(pprt
);
2248 static void panel_detach(struct parport
*port
)
2250 if (port
->number
!= parport
)
2254 pr_err("%s: port->number=%d parport=%d, nothing to unregister.\n",
2255 __func__
, port
->number
, parport
);
2258 if (scan_timer
.function
!= NULL
)
2259 del_timer_sync(&scan_timer
);
2262 if (keypad
.enabled
) {
2263 misc_deregister(&keypad_dev
);
2264 keypad_initialized
= 0;
2268 panel_lcd_print("\x0cLCD driver " PANEL_VERSION
2269 "\nunloaded.\x1b[Lc\x1b[Lb\x1b[L-");
2270 misc_deregister(&lcd_dev
);
2271 lcd
.initialized
= false;
2274 /* TODO: free all input signals */
2275 parport_release(pprt
);
2276 parport_unregister_device(pprt
);
2278 unregister_reboot_notifier(&panel_notifier
);
2282 static struct parport_driver panel_driver
= {
2284 .match_port
= panel_attach
,
2285 .detach
= panel_detach
,
2290 static int __init
panel_init_module(void)
2292 int selected_keypad_type
= NOT_SET
, err
;
2294 /* take care of an eventual profile */
2296 case PANEL_PROFILE_CUSTOM
:
2297 /* custom profile */
2298 selected_keypad_type
= DEFAULT_KEYPAD_TYPE
;
2299 selected_lcd_type
= DEFAULT_LCD_TYPE
;
2301 case PANEL_PROFILE_OLD
:
2302 /* 8 bits, 2*16, old keypad */
2303 selected_keypad_type
= KEYPAD_TYPE_OLD
;
2304 selected_lcd_type
= LCD_TYPE_OLD
;
2306 /* TODO: This two are a little hacky, sort it out later */
2307 if (lcd_width
== NOT_SET
)
2309 if (lcd_hwidth
== NOT_SET
)
2312 case PANEL_PROFILE_NEW
:
2313 /* serial, 2*16, new keypad */
2314 selected_keypad_type
= KEYPAD_TYPE_NEW
;
2315 selected_lcd_type
= LCD_TYPE_KS0074
;
2317 case PANEL_PROFILE_HANTRONIX
:
2318 /* 8 bits, 2*16 hantronix-like, no keypad */
2319 selected_keypad_type
= KEYPAD_TYPE_NONE
;
2320 selected_lcd_type
= LCD_TYPE_HANTRONIX
;
2322 case PANEL_PROFILE_NEXCOM
:
2323 /* generic 8 bits, 2*16, nexcom keypad, eg. Nexcom. */
2324 selected_keypad_type
= KEYPAD_TYPE_NEXCOM
;
2325 selected_lcd_type
= LCD_TYPE_NEXCOM
;
2327 case PANEL_PROFILE_LARGE
:
2328 /* 8 bits, 2*40, old keypad */
2329 selected_keypad_type
= KEYPAD_TYPE_OLD
;
2330 selected_lcd_type
= LCD_TYPE_OLD
;
2335 * Overwrite selection with module param values (both keypad and lcd),
2336 * where the deprecated params have lower prio.
2338 if (keypad_enabled
!= NOT_SET
)
2339 selected_keypad_type
= keypad_enabled
;
2340 if (keypad_type
!= NOT_SET
)
2341 selected_keypad_type
= keypad_type
;
2343 keypad
.enabled
= (selected_keypad_type
> 0);
2345 if (lcd_enabled
!= NOT_SET
)
2346 selected_lcd_type
= lcd_enabled
;
2347 if (lcd_type
!= NOT_SET
)
2348 selected_lcd_type
= lcd_type
;
2350 lcd
.enabled
= (selected_lcd_type
> 0);
2354 * Init lcd struct with load-time values to preserve exact
2355 * current functionality (at least for now).
2357 lcd
.height
= lcd_height
;
2358 lcd
.width
= lcd_width
;
2359 lcd
.bwidth
= lcd_bwidth
;
2360 lcd
.hwidth
= lcd_hwidth
;
2361 lcd
.charset
= lcd_charset
;
2362 lcd
.proto
= lcd_proto
;
2363 lcd
.pins
.e
= lcd_e_pin
;
2364 lcd
.pins
.rs
= lcd_rs_pin
;
2365 lcd
.pins
.rw
= lcd_rw_pin
;
2366 lcd
.pins
.cl
= lcd_cl_pin
;
2367 lcd
.pins
.da
= lcd_da_pin
;
2368 lcd
.pins
.bl
= lcd_bl_pin
;
2370 /* Leave it for now, just in case */
2371 lcd
.esc_seq
.len
= -1;
2374 switch (selected_keypad_type
) {
2375 case KEYPAD_TYPE_OLD
:
2376 keypad_profile
= old_keypad_profile
;
2378 case KEYPAD_TYPE_NEW
:
2379 keypad_profile
= new_keypad_profile
;
2381 case KEYPAD_TYPE_NEXCOM
:
2382 keypad_profile
= nexcom_keypad_profile
;
2385 keypad_profile
= NULL
;
2389 if (!lcd
.enabled
&& !keypad
.enabled
) {
2390 /* no device enabled, let's exit */
2391 pr_err("driver version " PANEL_VERSION
" disabled.\n");
2395 err
= parport_register_driver(&panel_driver
);
2397 pr_err("could not register with parport. Aborting.\n");
2402 pr_info("driver version " PANEL_VERSION
2403 " registered on parport%d (io=0x%lx).\n", parport
,
2406 pr_info("driver version " PANEL_VERSION
2407 " not yet registered\n");
2411 static void __exit
panel_cleanup_module(void)
2413 parport_unregister_driver(&panel_driver
);
2416 module_init(panel_init_module
);
2417 module_exit(panel_cleanup_module
);
2418 MODULE_AUTHOR("Willy Tarreau");
2419 MODULE_LICENSE("GPL");