Merge 3.9-rc5 into staging-next
[deliverable/linux.git] / drivers / staging / ti-soc-thermal / ti_soc_thermal.txt
1 * Texas Instrument OMAP SCM bandgap bindings
2
3 In the System Control Module, OMAP supplies a voltage reference
4 and a temperature sensor feature that are gathered in the band
5 gap voltage and temperature sensor (VBGAPTS) module. The band
6 gap provides current and voltage reference for its internal
7 circuits and other analog IP blocks. The analog-to-digital
8 converter (ADC) produces an output value that is proportional
9 to the silicon temperature.
10
11 Required properties:
12 - compatible : Should be:
13 - "ti,omap4430-bandgap" : for OMAP4430 bandgap
14 - "ti,omap4460-bandgap" : for OMAP4460 bandgap
15 - "ti,omap4470-bandgap" : for OMAP4470 bandgap
16 - "ti,omap5430-bandgap" : for OMAP5430 bandgap
17 - interrupts : this entry should indicate which interrupt line
18 the talert signal is routed to;
19 Specific:
20 - ti,tshut-gpio : this entry should be used to inform which GPIO
21 line the tshut signal is routed to;
22 - regs : this entry must also be specified and it is specific
23 to each bandgap version, because the mapping may change from
24 soc to soc, apart of depending on available features.
25
26 Example:
27 OMAP4430:
28 bandgap {
29 reg = <0x4a002260 0x4 0x4a00232C 0x4>;
30 compatible = "ti,omap4430-bandgap";
31 };
32
33 OMAP4460:
34 bandgap {
35 reg = <0x4a002260 0x4
36 0x4a00232C 0x4
37 0x4a002378 0x18>;
38 compatible = "ti,omap4460-bandgap";
39 interrupts = <0 126 4>; /* talert */
40 ti,tshut-gpio = <86>;
41 };
42
43 OMAP4470:
44 bandgap {
45 reg = <0x4a002260 0x4
46 0x4a00232C 0x4
47 0x4a002378 0x18>;
48 compatible = "ti,omap4470-bandgap";
49 interrupts = <0 126 4>; /* talert */
50 ti,tshut-gpio = <86>;
51 };
52
53 OMAP5430:
54 bandgap {
55 reg = <0x4a0021e0 0xc
56 0x4a00232c 0xc
57 0x4a002380 0x2c
58 0x4a0023C0 0x3c>;
59 compatible = "ti,omap5430-bandgap";
60 };
This page took 0.065025 seconds and 5 git commands to generate.