projects / deliverable / linux.git / blob
? search:


7eacc2f326df8616f504459bdea9b8950f6313c2
[deliverable/linux.git] / drivers / staging / wilc1000 / linux_wlan.c
1 #include "wilc_wfi_cfgoperations.h"
2 #include "linux_wlan_common.h"
3 #include "wilc_wlan_if.h"
4 #include "wilc_wlan.h"
5 #ifdef USE_WIRELESS
6 #include "wilc_wfi_cfgoperations.h"
7 #endif
8
9 #include "linux_wlan_common.h"
10
11 #include <linux/slab.h>
12 #include <linux/sched.h>
13 #include <linux/delay.h>
14 #include <linux/workqueue.h>
15 #include <linux/interrupt.h>
16 #include <linux/irq.h>
17 #include <linux/gpio.h>
18
19 #include <linux/kthread.h>
20 #include <linux/firmware.h>
21 #include <linux/delay.h>
22
23 #include <linux/init.h>
24 #include <linux/netdevice.h>
25 #ifdef DISABLE_PWRSAVE_AND_SCAN_DURING_IP
26 #include <linux/inetdevice.h>
27 #endif
28 #include <linux/etherdevice.h>
29 #include <linux/module.h>
30 #include <linux/kernel.h>
31 #include <linux/skbuff.h>
32
33 #include <linux/version.h>
34 #include <linux/semaphore.h>
35
36 #ifdef WILC_SDIO
37 #include "linux_wlan_sdio.h"
38 #else
39 #include "linux_wlan_spi.h"
40 #endif
41
42 #ifdef WILC_FULLY_HOSTING_AP
43 #include "wilc_host_ap.h"
44 #endif
45
46 #ifdef STATIC_MACADDRESS /* brandy_0724 [[ */
47 #include <linux/vmalloc.h>
48 #include <linux/fs.h>
49 struct task_struct *wilc_mac_thread;
50 unsigned char mac_add[] = {0x00, 0x80, 0xC2, 0x5E, 0xa2, 0xb2};
51 #endif /* brandy_0724 ]] */
52
53 #if defined(CUSTOMER_PLATFORM)
54 /*
55 TODO : Write power control functions as customer platform.
56 */
57 #else
58
59 #define _linux_wlan_device_power_on() {}
60 #define _linux_wlan_device_power_off() {}
61
62 #define _linux_wlan_device_detection() {}
63 #define _linux_wlan_device_removal() {}
64 #endif
65
66 #ifdef DISABLE_PWRSAVE_AND_SCAN_DURING_IP
67 extern bool g_obtainingIP;
68 #endif
69 extern u16 Set_machw_change_vir_if(bool bValue);
70 extern void resolve_disconnect_aberration(void *drvHandler);
71 extern u8 gau8MulticastMacAddrList[WILC_MULTICAST_TABLE_SIZE][ETH_ALEN];
72 void wilc1000_wlan_deinit(linux_wlan_t *nic);
73 #ifdef DISABLE_PWRSAVE_AND_SCAN_DURING_IP
74 extern struct timer_list hDuringIpTimer;
75 #endif
76
77 static int linux_wlan_device_power(int on_off)
78 {
79 PRINT_D(INIT_DBG, "linux_wlan_device_power.. (%d)\n", on_off);
80
81 if (on_off) {
82 _linux_wlan_device_power_on();
83 } else {
84 _linux_wlan_device_power_off();
85 }
86
87 return 0;
88 }
89
90 static int linux_wlan_device_detection(int on_off)
91 {
92 PRINT_D(INIT_DBG, "linux_wlan_device_detection.. (%d)\n", on_off);
93
94 #ifdef WILC_SDIO
95 if (on_off) {
96 _linux_wlan_device_detection();
97 } else {
98 _linux_wlan_device_removal();
99 }
100 #endif
101
102 return 0;
103 }
104
105 #ifdef DISABLE_PWRSAVE_AND_SCAN_DURING_IP
106 static int dev_state_ev_handler(struct notifier_block *this, unsigned long event, void *ptr);
107
108 static struct notifier_block g_dev_notifier = {
109 .notifier_call = dev_state_ev_handler
110 };
111 #endif
112
113 #define wilc_wlan_deinit(nic) { if (&g_linux_wlan->oup != NULL) \
114 if (g_linux_wlan->oup.wlan_cleanup != NULL) \
115 g_linux_wlan->oup.wlan_cleanup(); }
116
117 #ifndef STA_FIRMWARE
118 #define STA_FIRMWARE "wifi_firmware.bin"
119 #endif
120
121 #ifndef AP_FIRMWARE
122 #define AP_FIRMWARE "wifi_firmware_ap.bin"
123 #endif
124
125 #ifndef P2P_CONCURRENCY_FIRMWARE
126 #define P2P_CONCURRENCY_FIRMWARE "wifi_firmware_p2p_concurrency.bin"
127 #endif
128
129 typedef struct android_wifi_priv_cmd {
130 char *buf;
131 int used_len;
132 int total_len;
133 } android_wifi_priv_cmd;
134
135 #define IRQ_WAIT 1
136 #define IRQ_NO_WAIT 0
137 /*
138 * to sync between mac_close and module exit.
139 * don't initialize or de-initialize from init/deinitlocks
140 * to be initialized from module wilc_netdev_init and
141 * deinitialized from mdoule_exit
142 */
143 static struct semaphore close_exit_sync;
144 unsigned int int_rcvdU;
145 unsigned int int_rcvdB;
146 unsigned int int_clrd;
147
148 static int wlan_deinit_locks(linux_wlan_t *nic);
149 static void wlan_deinitialize_threads(linux_wlan_t *nic);
150 static void linux_wlan_lock(void *vp);
151 void linux_wlan_unlock(void *vp);
152 extern void WILC_WFI_monitor_rx(uint8_t *buff, uint32_t size);
153 extern void WILC_WFI_p2p_rx(struct net_device *dev, uint8_t *buff, uint32_t size);
154
155 static void *internal_alloc(uint32_t size, uint32_t flag);
156 static void linux_wlan_tx_complete(void *priv, int status);
157 void frmw_to_linux(uint8_t *buff, uint32_t size, uint32_t pkt_offset);
158 static int mac_init_fn(struct net_device *ndev);
159 int mac_xmit(struct sk_buff *skb, struct net_device *dev);
160 int mac_open(struct net_device *ndev);
161 int mac_close(struct net_device *ndev);
162 static struct net_device_stats *mac_stats(struct net_device *dev);
163 static int mac_ioctl(struct net_device *ndev, struct ifreq *req, int cmd);
164 static void wilc_set_multicast_list(struct net_device *dev);
165
166 /*
167 * for now - in frmw_to_linux there should be private data to be passed to it
168 * and this data should be pointer to net device
169 */
170 linux_wlan_t *g_linux_wlan;
171 wilc_wlan_oup_t *gpstrWlanOps;
172 bool bEnablePS = true;
173
174 static const struct net_device_ops wilc_netdev_ops = {
175 .ndo_init = mac_init_fn,
176 .ndo_open = mac_open,
177 .ndo_stop = mac_close,
178 .ndo_start_xmit = mac_xmit,
179 .ndo_do_ioctl = mac_ioctl,
180 .ndo_get_stats = mac_stats,
181 .ndo_set_rx_mode = wilc_set_multicast_list,
182
183 };
184
185 #ifdef DEBUG_MODE
186
187 extern volatile int timeNo;
188
189 #define DEGUG_BUFFER_LENGTH 1000
190 volatile int WatchDogdebuggerCounter;
191 char DebugBuffer[DEGUG_BUFFER_LENGTH + 20] = {0};
192 static char *ps8current = DebugBuffer;
193
194 void printk_later(const char *format, ...)
195 {
196 va_list args;
197 va_start(args, format);
198 ps8current += vsprintf(ps8current, format, args);
199 va_end(args);
200 if ((ps8current - DebugBuffer) > DEGUG_BUFFER_LENGTH)
201 ps8current = DebugBuffer;
202
203 }
204
205 void dump_logs(void)
206 {
207 if (DebugBuffer[0]) {
208 DebugBuffer[DEGUG_BUFFER_LENGTH] = 0;
209 PRINT_INFO(GENERIC_DBG, "early printed\n");
210 PRINT_D(GENERIC_DBG, ps8current + 1);
211 ps8current[1] = 0;
212 PRINT_INFO(GENERIC_DBG, "latest printed\n");
213 PRINT_D(GENERIC_DBG, DebugBuffer);
214 DebugBuffer[0] = 0;
215 ps8current = DebugBuffer;
216 }
217 }
218
219 void Reset_WatchDogdebugger(void)
220 {
221 WatchDogdebuggerCounter = 0;
222 }
223
224 static int DebuggingThreadTask(void *vp)
225 {
226 while (1) {
227 while (!WatchDogdebuggerCounter) {
228 PRINT_D(GENERIC_DBG, "Debug Thread Running %d\n", timeNo);
229 WatchDogdebuggerCounter = 1;
230 msleep(10000);
231 }
232 dump_logs();
233 WatchDogdebuggerCounter = 0;
234 }
235 }
236 #endif
237
238 #ifdef DISABLE_PWRSAVE_AND_SCAN_DURING_IP
239 static int dev_state_ev_handler(struct notifier_block *this, unsigned long event, void *ptr)
240 {
241 struct in_ifaddr *dev_iface = (struct in_ifaddr *)ptr;
242 struct WILC_WFI_priv *priv;
243 tstrWILC_WFIDrv *pstrWFIDrv;
244 struct net_device *dev;
245 u8 *pIP_Add_buff;
246 perInterface_wlan_t *nic;
247 u8 null_ip[4] = {0};
248 char wlan_dev_name[5] = "wlan0";
249
250 if (dev_iface == NULL || dev_iface->ifa_dev == NULL || dev_iface->ifa_dev->dev == NULL) {
251 PRINT_D(GENERIC_DBG, "dev_iface = NULL\n");
252 return NOTIFY_DONE;
253 }
254
255 if ((memcmp(dev_iface->ifa_label, "wlan0", 5)) && (memcmp(dev_iface->ifa_label, "p2p0", 4))) {
256 PRINT_D(GENERIC_DBG, "Interface is neither WLAN0 nor P2P0\n");
257 return NOTIFY_DONE;
258 }
259
260 dev = (struct net_device *)dev_iface->ifa_dev->dev;
261 if (dev->ieee80211_ptr == NULL || dev->ieee80211_ptr->wiphy == NULL) {
262 PRINT_D(GENERIC_DBG, "No Wireless registerd\n");
263 return NOTIFY_DONE;
264 }
265 priv = wiphy_priv(dev->ieee80211_ptr->wiphy);
266 if (priv == NULL) {
267 PRINT_D(GENERIC_DBG, "No Wireless Priv\n");
268 return NOTIFY_DONE;
269 }
270 pstrWFIDrv = (tstrWILC_WFIDrv *)priv->hWILCWFIDrv;
271 nic = netdev_priv(dev);
272 if (nic == NULL || pstrWFIDrv == NULL) {
273 PRINT_D(GENERIC_DBG, "No Wireless Priv\n");
274 return NOTIFY_DONE;
275 }
276
277 PRINT_INFO(GENERIC_DBG, "dev_state_ev_handler +++\n"); /* tony */
278
279 switch (event) {
280 case NETDEV_UP:
281 PRINT_D(GENERIC_DBG, "dev_state_ev_handler event=NETDEV_UP %p\n", dev); /* tony */
282
283 PRINT_INFO(GENERIC_DBG, "\n ============== IP Address Obtained ===============\n\n");
284
285 /*If we are in station mode or client mode*/
286 if (nic->iftype == STATION_MODE || nic->iftype == CLIENT_MODE) {
287 pstrWFIDrv->IFC_UP = 1;
288 g_obtainingIP = false;
289 del_timer(&hDuringIpTimer);
290 PRINT_D(GENERIC_DBG, "IP obtained , enable scan\n");
291 }
292
293 if (bEnablePS)
294 host_int_set_power_mgmt(pstrWFIDrv, 1, 0);
295
296 PRINT_D(GENERIC_DBG, "[%s] Up IP\n", dev_iface->ifa_label);
297
298 pIP_Add_buff = (char *) (&(dev_iface->ifa_address));
299 PRINT_D(GENERIC_DBG, "IP add=%d:%d:%d:%d\n", pIP_Add_buff[0], pIP_Add_buff[1], pIP_Add_buff[2], pIP_Add_buff[3]);
300 host_int_setup_ipaddress(pstrWFIDrv, pIP_Add_buff, nic->u8IfIdx);
301
302 break;
303
304 case NETDEV_DOWN:
305 PRINT_D(GENERIC_DBG, "dev_state_ev_handler event=NETDEV_DOWN %p\n", dev); /* tony */
306
307 PRINT_INFO(GENERIC_DBG, "\n ============== IP Address Released ===============\n\n");
308 if (nic->iftype == STATION_MODE || nic->iftype == CLIENT_MODE) {
309 pstrWFIDrv->IFC_UP = 0;
310 g_obtainingIP = false;
311 }
312
313 if (memcmp(dev_iface->ifa_label, wlan_dev_name, 5) == 0)
314 host_int_set_power_mgmt(pstrWFIDrv, 0, 0);
315
316 resolve_disconnect_aberration(pstrWFIDrv);
317
318 PRINT_D(GENERIC_DBG, "[%s] Down IP\n", dev_iface->ifa_label);
319
320 pIP_Add_buff = null_ip;
321 PRINT_D(GENERIC_DBG, "IP add=%d:%d:%d:%d\n", pIP_Add_buff[0], pIP_Add_buff[1], pIP_Add_buff[2], pIP_Add_buff[3]);
322
323 host_int_setup_ipaddress(pstrWFIDrv, pIP_Add_buff, nic->u8IfIdx);
324
325 break;
326
327 default:
328 PRINT_INFO(GENERIC_DBG, "dev_state_ev_handler event=default\n"); /* tony */
329 PRINT_INFO(GENERIC_DBG, "[%s] unknown dev event: %lu\n", dev_iface->ifa_label, event);
330
331 break;
332 }
333
334 return NOTIFY_DONE;
335
336 }
337 #endif
338
339 /*
340 * Interrupt initialization and handling functions
341 */
342
343 void linux_wlan_enable_irq(void)
344 {
345
346 #if (RX_BH_TYPE != RX_BH_THREADED_IRQ)
347 #if (defined WILC_SPI) || (defined WILC_SDIO_IRQ_GPIO)
348 PRINT_D(INT_DBG, "Enabling IRQ ...\n");
349 enable_irq(g_linux_wlan->dev_irq_num);
350 #endif
351 #endif
352 }
353
354 void linux_wlan_disable_irq(int wait)
355 {
356 #if (defined WILC_SPI) || (defined WILC_SDIO_IRQ_GPIO)
357 if (wait) {
358 PRINT_D(INT_DBG, "Disabling IRQ ...\n");
359 disable_irq(g_linux_wlan->dev_irq_num);
360 } else {
361 PRINT_D(INT_DBG, "Disabling IRQ ...\n");
362 disable_irq_nosync(g_linux_wlan->dev_irq_num);
363 }
364 #endif
365 }
366
367 #if (defined WILC_SPI) || (defined WILC_SDIO_IRQ_GPIO)
368 static irqreturn_t isr_uh_routine(int irq, void *user_data)
369 {
370 int_rcvdU++;
371 #if (RX_BH_TYPE != RX_BH_THREADED_IRQ)
372 linux_wlan_disable_irq(IRQ_NO_WAIT);
373 #endif
374 PRINT_D(INT_DBG, "Interrupt received UH\n");
375
376 /*While mac is closing cacncel the handling of any interrupts received*/
377 if (g_linux_wlan->close) {
378 PRINT_ER("Driver is CLOSING: Can't handle UH interrupt\n");
379 #if (RX_BH_TYPE == RX_BH_THREADED_IRQ)
380 return IRQ_HANDLED;
381 #else
382 return IRQ_NONE;
383 #endif
384
385 }
386 #if (RX_BH_TYPE == RX_BH_WORK_QUEUE)
387 schedule_work(&g_linux_wlan->rx_work_queue);
388 return IRQ_HANDLED;
389 #elif (RX_BH_TYPE == RX_BH_KTHREAD)
390 linux_wlan_unlock(&g_linux_wlan->rx_sem);
391 return IRQ_HANDLED;
392 #elif (RX_BH_TYPE == RX_BH_THREADED_IRQ)
393 return IRQ_WAKE_THREAD;
394 #endif
395
396 }
397 #endif
398
399 #if (RX_BH_TYPE == RX_BH_WORK_QUEUE || RX_BH_TYPE == RX_BH_THREADED_IRQ)
400
401 #if (RX_BH_TYPE == RX_BH_THREADED_IRQ)
402 irqreturn_t isr_bh_routine(int irq, void *userdata)
403 {
404 linux_wlan_t *nic;
405 nic = (linux_wlan_t *)userdata;
406 #else
407 static void isr_bh_routine(struct work_struct *work)
408 {
409 perInterface_wlan_t *nic;
410 nic = (perInterface_wlan_t *)container_of(work, linux_wlan_t, rx_work_queue);
411 #endif
412
413 /*While mac is closing cacncel the handling of any interrupts received*/
414 if (g_linux_wlan->close) {
415 PRINT_ER("Driver is CLOSING: Can't handle BH interrupt\n");
416 #if (RX_BH_TYPE == RX_BH_THREADED_IRQ)
417 return IRQ_HANDLED;
418 #else
419 return;
420 #endif
421 }
422
423 int_rcvdB++;
424 PRINT_D(INT_DBG, "Interrupt received BH\n");
425 if (g_linux_wlan->oup.wlan_handle_rx_isr != 0)
426 g_linux_wlan->oup.wlan_handle_rx_isr();
427 else
428 PRINT_ER("wlan_handle_rx_isr() hasn't been initialized\n");
429
430 #if (RX_BH_TYPE == RX_BH_THREADED_IRQ)
431 return IRQ_HANDLED;
432 #endif
433 }
434 #elif (RX_BH_TYPE == RX_BH_KTHREAD)
435 static int isr_bh_routine(void *vp)
436 {
437 linux_wlan_t *nic;
438
439 nic = (linux_wlan_t *)vp;
440
441 while (1) {
442 linux_wlan_lock(&nic->rx_sem);
443 if (g_linux_wlan->close) {
444
445 while (!kthread_should_stop())
446 schedule();
447
448 break;
449 }
450 int_rcvdB++;
451 PRINT_D(INT_DBG, "Interrupt received BH\n");
452 if (g_linux_wlan->oup.wlan_handle_rx_isr != 0)
453 g_linux_wlan->oup.wlan_handle_rx_isr();
454 else
455 PRINT_ER("wlan_handle_rx_isr() hasn't been initialized\n");
456 }
457
458 return 0;
459 }
460 #endif
461
462 #if (defined WILC_SPI) || (defined WILC_SDIO_IRQ_GPIO)
463 static int init_irq(linux_wlan_t *p_nic)
464 {
465 int ret = 0;
466 linux_wlan_t *nic = p_nic;
467
468 /*initialize GPIO and register IRQ num*/
469 /*GPIO request*/
470 if ((gpio_request(GPIO_NUM, "WILC_INTR") == 0) &&
471 (gpio_direction_input(GPIO_NUM) == 0)) {
472 #if defined(CUSTOMER_PLATFORM)
473 /*
474 TODO : save the registerd irq number to the private wilc context in kernel.
475 *
476 * ex) nic->dev_irq_num = gpio_to_irq(GPIO_NUM);
477 */
478 #elif defined(NM73131_0_BOARD)
479 nic->dev_irq_num = IRQ_WILC1000;
480 #elif defined(PANDA_BOARD)
481 gpio_export(GPIO_NUM, 1);
482 nic->dev_irq_num = OMAP_GPIO_IRQ(GPIO_NUM);
483 irq_set_irq_type(nic->dev_irq_num, IRQ_TYPE_LEVEL_LOW);
484 #else
485 nic->dev_irq_num = gpio_to_irq(GPIO_NUM);
486 #endif
487 } else {
488 ret = -1;
489 PRINT_ER("could not obtain gpio for WILC_INTR\n");
490 }
491
492 #if (RX_BH_TYPE == RX_BH_THREADED_IRQ)
493 if ((ret != -1) && (request_threaded_irq(nic->dev_irq_num, isr_uh_routine, isr_bh_routine,
494 IRQF_TRIGGER_LOW | IRQF_ONESHOT, /*Without IRQF_ONESHOT the uh will remain kicked in and dont gave a chance to bh*/
495 "WILC_IRQ", nic)) < 0) {
496
497 #else
498 /*Request IRQ*/
499 if ((ret != -1) && (request_irq(nic->dev_irq_num, isr_uh_routine,
500 IRQF_TRIGGER_LOW, "WILC_IRQ", nic) < 0)) {
501
502 #endif
503 PRINT_ER("Failed to request IRQ for GPIO: %d\n", GPIO_NUM);
504 ret = -1;
505 } else {
506
507 PRINT_D(INIT_DBG, "IRQ request succeeded IRQ-NUM= %d on GPIO: %d\n",
508 nic->dev_irq_num, GPIO_NUM);
509 }
510
511 return ret;
512 }
513 #endif
514
515 static void deinit_irq(linux_wlan_t *nic)
516 {
517 #if (defined WILC_SPI) || (defined WILC_SDIO_IRQ_GPIO)
518 /* Deintialize IRQ */
519 if (&nic->dev_irq_num != 0) {
520 free_irq(nic->dev_irq_num, g_linux_wlan);
521
522 gpio_free(GPIO_NUM);
523 }
524 #endif
525 }
526
527 /*
528 * OS functions
529 */
530 static void linux_wlan_msleep(uint32_t msc)
531 {
532 if (msc <= 4000000) {
533 u32 u32Temp = msc * 1000;
534 usleep_range(u32Temp, u32Temp);
535 } else {
536 msleep(msc);
537 }
538 }
539
540 static void linux_wlan_atomic_msleep(uint32_t msc)
541 {
542 mdelay(msc);
543 }
544 static void linux_wlan_dbg(uint8_t *buff)
545 {
546 PRINT_D(INIT_DBG, "%d\n", *buff);
547 }
548
549 static void *linux_wlan_malloc_atomic(uint32_t sz)
550 {
551 char *pntr = NULL;
552 pntr = kmalloc(sz, GFP_ATOMIC);
553 PRINT_D(MEM_DBG, "Allocating %d bytes at address %p\n", sz, pntr);
554 return (void *)pntr;
555
556 }
557 static void *linux_wlan_malloc(uint32_t sz)
558 {
559 char *pntr = NULL;
560 pntr = kmalloc(sz, GFP_KERNEL);
561 PRINT_D(MEM_DBG, "Allocating %d bytes at address %p\n", sz, pntr);
562 return (void *)pntr;
563 }
564
565 void linux_wlan_free(void *vp)
566 {
567 if (vp != NULL) {
568 PRINT_D(MEM_DBG, "Freeing %p\n", vp);
569 kfree(vp);
570 }
571 }
572
573 static void *internal_alloc(uint32_t size, uint32_t flag)
574 {
575 char *pntr = NULL;
576 pntr = kmalloc(size, flag);
577 PRINT_D(MEM_DBG, "Allocating %d bytes at address %p\n", size, pntr);
578 return (void *)pntr;
579 }
580
581 static void linux_wlan_init_lock(char *lockName, void *plock, int count)
582 {
583 sema_init((struct semaphore *)plock, count);
584 PRINT_D(LOCK_DBG, "Initializing [%s][%p]\n", lockName, plock);
585
586 }
587
588 static void linux_wlan_deinit_lock(void *plock)
589 {
590 /* mutex_destroy((struct mutex*)plock); */
591 }
592
593 static void linux_wlan_lock(void *vp)
594 {
595 PRINT_D(LOCK_DBG, "Locking %p\n", vp);
596 if (vp != NULL) {
597 while (down_interruptible((struct semaphore *) vp))
598 ;
599 } else {
600 PRINT_ER("Failed, mutex is NULL\n");
601 }
602 }
603
604 static int linux_wlan_lock_timeout(void *vp, u32 timeout)
605 {
606 int error = -1;
607 PRINT_D(LOCK_DBG, "Locking %p\n", vp);
608 if (vp != NULL)
609 error = down_timeout((struct semaphore *)vp, msecs_to_jiffies(timeout));
610 else
611 PRINT_ER("Failed, mutex is NULL\n");
612 return error;
613 }
614
615 void linux_wlan_unlock(void *vp)
616 {
617 PRINT_D(LOCK_DBG, "Unlocking %p\n", vp);
618 if (vp != NULL)
619 up((struct semaphore *)vp);
620 else
621 PRINT_ER("Failed, mutex is NULL\n");
622 }
623
624 static void linux_wlan_init_mutex(char *lockName, void *plock, int count)
625 {
626 mutex_init((struct mutex *)plock);
627 PRINT_D(LOCK_DBG, "Initializing mutex [%s][%p]\n", lockName, plock);
628
629 }
630
631 static void linux_wlan_deinit_mutex(void *plock)
632 {
633 mutex_destroy((struct mutex *)plock);
634 }
635
636 static void linux_wlan_lock_mutex(void *vp)
637 {
638 PRINT_D(LOCK_DBG, "Locking mutex %p\n", vp);
639 if (vp != NULL) {
640 /*
641 * if(mutex_is_locked((struct mutex*)vp))
642 * {
643 * //PRINT_ER("Mutex already locked - %p \n",vp);
644 * }
645 */
646 mutex_lock((struct mutex *)vp);
647
648 } else {
649 PRINT_ER("Failed, mutex is NULL\n");
650 }
651 }
652
653 static void linux_wlan_unlock_mutex(void *vp)
654 {
655 PRINT_D(LOCK_DBG, "Unlocking mutex %p\n", vp);
656 if (vp != NULL) {
657
658 if (mutex_is_locked((struct mutex *)vp)) {
659 mutex_unlock((struct mutex *)vp);
660 } else {
661 /* PRINT_ER("Mutex already unlocked - %p\n",vp); */
662 }
663
664 } else {
665 PRINT_ER("Failed, mutex is NULL\n");
666 }
667 }
668
669 /*Added by Amr - BugID_4720*/
670 static void linux_wlan_init_spin_lock(char *lockName, void *plock, int count)
671 {
672 spin_lock_init((spinlock_t *)plock);
673 PRINT_D(SPIN_DEBUG, "Initializing mutex [%s][%p]\n", lockName, plock);
674
675 }
676
677 static void linux_wlan_deinit_spin_lock(void *plock)
678 {
679
680 }
681 static void linux_wlan_spin_lock(void *vp, unsigned long *flags)
682 {
683 unsigned long lflags;
684 PRINT_D(SPIN_DEBUG, "Lock spin %p\n", vp);
685 if (vp != NULL) {
686 spin_lock_irqsave((spinlock_t *)vp, lflags);
687 *flags = lflags;
688 } else {
689 PRINT_ER("Failed, spin lock is NULL\n");
690 }
691 }
692 static void linux_wlan_spin_unlock(void *vp, unsigned long *flags)
693 {
694 unsigned long lflags = *flags;
695 PRINT_D(SPIN_DEBUG, "Unlock spin %p\n", vp);
696 if (vp != NULL) {
697 spin_unlock_irqrestore((spinlock_t *)vp, lflags);
698 *flags = lflags;
699 } else {
700 PRINT_ER("Failed, spin lock is NULL\n");
701 }
702 }
703
704 static void linux_wlan_mac_indicate(int flag)
705 {
706 /*I have to do it that way becuase there is no mean to encapsulate device pointer
707 * as a parameter
708 */
709 linux_wlan_t *pd = g_linux_wlan;
710 int status;
711
712 if (flag == WILC_MAC_INDICATE_STATUS) {
713 pd->oup.wlan_cfg_get_value(WID_STATUS, (unsigned char *)&status, 4);
714 if (pd->mac_status == WILC_MAC_STATUS_INIT) {
715 pd->mac_status = status;
716 linux_wlan_unlock(&pd->sync_event);
717 } else {
718 pd->mac_status = status;
719 }
720
721 if (pd->mac_status == WILC_MAC_STATUS_CONNECT) { /* Connect */
722 }
723
724 } else if (flag == WILC_MAC_INDICATE_SCAN) {
725 PRINT_D(GENERIC_DBG, "Scanning ...\n");
726
727 }
728
729 }
730
731 struct net_device *GetIfHandler(uint8_t *pMacHeader)
732 {
733 uint8_t *Bssid, *Bssid1;
734 int i = 0;
735
736 Bssid = pMacHeader + 10;
737 Bssid1 = pMacHeader + 4;
738
739 for (i = 0; i < g_linux_wlan->u8NoIfcs; i++) {
740 if (!memcmp(Bssid1, g_linux_wlan->strInterfaceInfo[i].aBSSID, ETH_ALEN) ||
741 !memcmp(Bssid, g_linux_wlan->strInterfaceInfo[i].aBSSID, ETH_ALEN)) {
742 return g_linux_wlan->strInterfaceInfo[i].wilc_netdev;
743 }
744 }
745 PRINT_INFO(INIT_DBG, "Invalide handle\n");
746 for (i = 0; i < 25; i++)
747 PRINT_D(INIT_DBG, "%02x ", pMacHeader[i]);
748 Bssid = pMacHeader + 18;
749 Bssid1 = pMacHeader + 12;
750 for (i = 0; i < g_linux_wlan->u8NoIfcs; i++) {
751 if (!memcmp(Bssid1, g_linux_wlan->strInterfaceInfo[i].aBSSID, ETH_ALEN) ||
752 !memcmp(Bssid, g_linux_wlan->strInterfaceInfo[i].aBSSID, ETH_ALEN)) {
753 PRINT_D(INIT_DBG, "Ctx [%p]\n", g_linux_wlan->strInterfaceInfo[i].wilc_netdev);
754 return g_linux_wlan->strInterfaceInfo[i].wilc_netdev;
755 }
756 }
757 PRINT_INFO(INIT_DBG, "\n");
758 return NULL;
759 }
760
761 int linux_wlan_set_bssid(struct net_device *wilc_netdev, uint8_t *pBSSID)
762 {
763 int i = 0;
764 int ret = -1;
765
766 PRINT_D(INIT_DBG, "set bssid on[%p]\n", wilc_netdev);
767 for (i = 0; i < g_linux_wlan->u8NoIfcs; i++) {
768 if (g_linux_wlan->strInterfaceInfo[i].wilc_netdev == wilc_netdev) {
769 PRINT_D(INIT_DBG, "set bssid [%x][%x][%x]\n", pBSSID[0], pBSSID[1], pBSSID[2]);
770 memcpy(g_linux_wlan->strInterfaceInfo[i].aBSSID, pBSSID, 6);
771 ret = 0;
772 break;
773 }
774 }
775 return ret;
776 }
777
778 /*BugID_5213*/
779 /*Function to get number of connected interfaces*/
780 int linux_wlan_get_num_conn_ifcs(void)
781 {
782 uint8_t i = 0;
783 uint8_t null_bssid[6] = {0};
784 uint8_t ret_val = 0;
785
786 for (i = 0; i < g_linux_wlan->u8NoIfcs; i++) {
787 if (memcmp(g_linux_wlan->strInterfaceInfo[i].aBSSID, null_bssid, 6))
788 ret_val++;
789 }
790 return ret_val;
791 }
792
793 static int linux_wlan_rxq_task(void *vp)
794 {
795
796 /* inform wilc1000_wlan_init that RXQ task is started. */
797 linux_wlan_unlock(&g_linux_wlan->rxq_thread_started);
798 while (1) {
799 linux_wlan_lock(&g_linux_wlan->rxq_event);
800 /* wait_for_completion(&g_linux_wlan->rxq_event); */
801
802 if (g_linux_wlan->close) {
803 /*Unlock the mutex in the mac_close function to indicate the exiting of the RX thread */
804 linux_wlan_unlock(&g_linux_wlan->rxq_thread_started);
805
806 while (!kthread_should_stop())
807 schedule();
808
809 PRINT_D(RX_DBG, " RX thread stopped\n");
810 break;
811 }
812 PRINT_D(RX_DBG, "Calling wlan_handle_rx_que()\n");
813
814 g_linux_wlan->oup.wlan_handle_rx_que();
815 }
816 return 0;
817 }
818
819 #define USE_TX_BACKOFF_DELAY_IF_NO_BUFFERS
820
821 static int linux_wlan_txq_task(void *vp)
822 {
823 int ret, txq_count;
824
825 #if defined USE_TX_BACKOFF_DELAY_IF_NO_BUFFERS
826 #define TX_BACKOFF_WEIGHT_INCR_STEP (1)
827 #define TX_BACKOFF_WEIGHT_DECR_STEP (1)
828 #define TX_BACKOFF_WEIGHT_MAX (7)
829 #define TX_BACKOFF_WEIGHT_MIN (0)
830 #define TX_BACKOFF_WEIGHT_UNIT_MS (10)
831 int backoff_weight = TX_BACKOFF_WEIGHT_MIN;
832 #endif
833
834 /* inform wilc1000_wlan_init that TXQ task is started. */
835 linux_wlan_unlock(&g_linux_wlan->txq_thread_started);
836 while (1) {
837
838 PRINT_D(TX_DBG, "txq_task Taking a nap :)\n");
839 linux_wlan_lock(&g_linux_wlan->txq_event);
840 /* wait_for_completion(&pd->txq_event); */
841 PRINT_D(TX_DBG, "txq_task Who waked me up :$\n");
842
843 if (g_linux_wlan->close) {
844 /*Unlock the mutex in the mac_close function to indicate the exiting of the TX thread */
845 linux_wlan_unlock(&g_linux_wlan->txq_thread_started);
846
847 while (!kthread_should_stop())
848 schedule();
849
850 PRINT_D(TX_DBG, "TX thread stopped\n");
851 break;
852 }
853 PRINT_D(TX_DBG, "txq_task handle the sending packet and let me go to sleep.\n");
854 #if !defined USE_TX_BACKOFF_DELAY_IF_NO_BUFFERS
855 g_linux_wlan->oup.wlan_handle_tx_que();
856 #else
857 do {
858 ret = g_linux_wlan->oup.wlan_handle_tx_que(&txq_count);
859 if (txq_count < FLOW_CONTROL_LOWER_THRESHOLD /* && netif_queue_stopped(pd->wilc_netdev)*/) {
860 PRINT_D(TX_DBG, "Waking up queue\n");
861 /* netif_wake_queue(pd->wilc_netdev); */
862 if (netif_queue_stopped(g_linux_wlan->strInterfaceInfo[0].wilc_netdev))
863 netif_wake_queue(g_linux_wlan->strInterfaceInfo[0].wilc_netdev);
864 if (netif_queue_stopped(g_linux_wlan->strInterfaceInfo[1].wilc_netdev))
865 netif_wake_queue(g_linux_wlan->strInterfaceInfo[1].wilc_netdev);
866 }
867
868 if (ret == WILC_TX_ERR_NO_BUF) { /* failed to allocate buffers in chip. */
869 do {
870 /* Back off from sending packets for some time. */
871 /* schedule_timeout will allow RX task to run and free buffers.*/
872 /* set_current_state(TASK_UNINTERRUPTIBLE); */
873 /* timeout = schedule_timeout(timeout); */
874 msleep(TX_BACKOFF_WEIGHT_UNIT_MS << backoff_weight);
875 } while (/*timeout*/ 0);
876 backoff_weight += TX_BACKOFF_WEIGHT_INCR_STEP;
877 if (backoff_weight > TX_BACKOFF_WEIGHT_MAX)
878 backoff_weight = TX_BACKOFF_WEIGHT_MAX;
879 } else {
880 if (backoff_weight > TX_BACKOFF_WEIGHT_MIN) {
881 backoff_weight -= TX_BACKOFF_WEIGHT_DECR_STEP;
882 if (backoff_weight < TX_BACKOFF_WEIGHT_MIN)
883 backoff_weight = TX_BACKOFF_WEIGHT_MIN;
884 }
885 }
886 /*TODO: drop packets after a certain time/number of retry count. */
887 } while (ret == WILC_TX_ERR_NO_BUF && !g_linux_wlan->close); /* retry sending packets if no more buffers in chip. */
888 #endif
889 }
890 return 0;
891 }
892
893 static void linux_wlan_rx_complete(void)
894 {
895 PRINT_D(RX_DBG, "RX completed\n");
896 }
897
898 int linux_wlan_get_firmware(perInterface_wlan_t *p_nic)
899 {
900
901 perInterface_wlan_t *nic = p_nic;
902 int ret = 0;
903 const struct firmware *wilc_firmware;
904 char *firmware;
905
906 if (nic->iftype == AP_MODE)
907 firmware = AP_FIRMWARE;
908 else if (nic->iftype == STATION_MODE)
909 firmware = STA_FIRMWARE;
910
911 /*BugID_5137*/
912 else {
913 PRINT_D(INIT_DBG, "Get P2P_CONCURRENCY_FIRMWARE\n");
914 firmware = P2P_CONCURRENCY_FIRMWARE;
915 }
916
917 if (nic == NULL) {
918 PRINT_ER("NIC is NULL\n");
919 goto _fail_;
920 }
921
922 if (&nic->wilc_netdev->dev == NULL) {
923 PRINT_ER("&nic->wilc_netdev->dev is NULL\n");
924 goto _fail_;
925 }
926
927 /* the firmare should be located in /lib/firmware in
928 * root file system with the name specified above */
929
930 #ifdef WILC_SDIO
931 if (request_firmware(&wilc_firmware, firmware, &g_linux_wlan->wilc_sdio_func->dev) != 0) {
932 PRINT_ER("%s - firmare not available\n", firmware);
933 ret = -1;
934 goto _fail_;
935 }
936 #else
937 if (request_firmware(&wilc_firmware, firmware, &g_linux_wlan->wilc_spidev->dev) != 0) {
938 PRINT_ER("%s - firmare not available\n", firmware);
939 ret = -1;
940 goto _fail_;
941 }
942 #endif
943 g_linux_wlan->wilc_firmware = wilc_firmware; /* Bug 4703 */
944
945 _fail_:
946
947 return ret;
948
949 }
950
951 #ifdef COMPLEMENT_BOOT
952 int repeat_power_cycle(perInterface_wlan_t *nic);
953 #endif
954
955 static int linux_wlan_start_firmware(perInterface_wlan_t *nic)
956 {
957
958 int ret = 0;
959 /* start firmware */
960 PRINT_D(INIT_DBG, "Starting Firmware ...\n");
961 ret = g_linux_wlan->oup.wlan_start();
962 if (ret < 0) {
963 PRINT_ER("Failed to start Firmware\n");
964 goto _fail_;
965 }
966
967 /* wait for mac ready */
968 PRINT_D(INIT_DBG, "Waiting for Firmware to get ready ...\n");
969 ret = linux_wlan_lock_timeout(&g_linux_wlan->sync_event, 5000);
970 if (ret) {
971 #ifdef COMPLEMENT_BOOT
972 static int timeout = 5;
973
974 if (timeout--) {
975 PRINT_D(INIT_DBG, "repeat power cycle[%d]", timeout);
976 ret = repeat_power_cycle(nic);
977 } else {
978 timeout = 5;
979 ret = -1;
980 goto _fail_;
981 }
982 #endif
983 PRINT_D(INIT_DBG, "Firmware start timed out");
984 goto _fail_;
985 }
986 /*
987 * TODO: Driver shouoldn't wait forever for firmware to get started -
988 * in case of timeout this should be handled properly
989 */
990 PRINT_D(INIT_DBG, "Firmware successfully started\n");
991
992 _fail_:
993 return ret;
994 }
995 static int linux_wlan_firmware_download(linux_wlan_t *p_nic)
996 {
997
998 int ret = 0;
999
1000 if (g_linux_wlan->wilc_firmware == NULL) {
1001 PRINT_ER("Firmware buffer is NULL\n");
1002 ret = -ENOBUFS;
1003 goto _FAIL_;
1004 }
1005 /**
1006 * do the firmware download
1007 **/
1008 PRINT_D(INIT_DBG, "Downloading Firmware ...\n");
1009 ret = g_linux_wlan->oup.wlan_firmware_download(g_linux_wlan->wilc_firmware->data, g_linux_wlan->wilc_firmware->size);
1010 if (ret < 0)
1011 goto _FAIL_;
1012
1013 /* Freeing FW buffer */
1014 PRINT_D(INIT_DBG, "Freeing FW buffer ...\n");
1015 PRINT_D(INIT_DBG, "Releasing firmware\n");
1016 release_firmware(g_linux_wlan->wilc_firmware);
1017 g_linux_wlan->wilc_firmware = NULL;
1018
1019 PRINT_D(INIT_DBG, "Download Succeeded\n");
1020
1021 _FAIL_:
1022 return ret;
1023 }
1024
1025 /* startup configuration - could be changed later using iconfig*/
1026 static int linux_wlan_init_test_config(struct net_device *dev, linux_wlan_t *p_nic)
1027 {
1028
1029 unsigned char c_val[64];
1030 #ifndef STATIC_MACADDRESS
1031 unsigned char mac_add[] = {0x00, 0x80, 0xC2, 0x5E, 0xa2, 0xff};
1032 #endif
1033
1034 /*BugID_5077*/
1035 struct WILC_WFI_priv *priv;
1036 tstrWILC_WFIDrv *pstrWFIDrv;
1037
1038 PRINT_D(TX_DBG, "Start configuring Firmware\n");
1039 #ifndef STATIC_MACADDRESS
1040 get_random_bytes(&mac_add[5], 1);
1041 get_random_bytes(&mac_add[4], 1);
1042 #endif
1043 priv = wiphy_priv(dev->ieee80211_ptr->wiphy);
1044 pstrWFIDrv = (tstrWILC_WFIDrv *)priv->hWILCWFIDrv;
1045 PRINT_D(INIT_DBG, "Host = %p\n", pstrWFIDrv);
1046
1047 PRINT_D(INIT_DBG, "MAC address is : %02x-%02x-%02x-%02x-%02x-%02x\n", mac_add[0], mac_add[1], mac_add[2], mac_add[3], mac_add[4], mac_add[5]);
1048 wilc_get_chipid(0);
1049
1050 if (g_linux_wlan->oup.wlan_cfg_set == NULL) {
1051 PRINT_D(INIT_DBG, "Null p[ointer\n");
1052 goto _fail_;
1053 }
1054
1055 *(int *)c_val = (u32)pstrWFIDrv;
1056
1057 if (!g_linux_wlan->oup.wlan_cfg_set(1, WID_SET_DRV_HANDLER, c_val, 4, 0, 0))
1058 goto _fail_;
1059
1060 /*to tell fw that we are going to use PC test - WILC specific*/
1061 c_val[0] = 0;
1062 if (!g_linux_wlan->oup.wlan_cfg_set(0, WID_PC_TEST_MODE, c_val, 1, 0, 0))
1063 goto _fail_;
1064
1065 c_val[0] = INFRASTRUCTURE;
1066 if (!g_linux_wlan->oup.wlan_cfg_set(0, WID_BSS_TYPE, c_val, 1, 0, 0))
1067 goto _fail_;
1068
1069 /* c_val[0] = RATE_AUTO; / * bug 4275: Enable autorate and limit it to 24Mbps * / */
1070 c_val[0] = RATE_AUTO;
1071 if (!g_linux_wlan->oup.wlan_cfg_set(0, WID_CURRENT_TX_RATE, c_val, 1, 0, 0))
1072 goto _fail_;
1073
1074 c_val[0] = G_MIXED_11B_2_MODE;
1075 if (!g_linux_wlan->oup.wlan_cfg_set(0, WID_11G_OPERATING_MODE, c_val, 1, 0, 0))
1076 goto _fail_;
1077
1078 c_val[0] = 1;
1079 if (!g_linux_wlan->oup.wlan_cfg_set(0, WID_CURRENT_CHANNEL, c_val, 1, 0, 0))
1080 goto _fail_;
1081
1082 c_val[0] = G_SHORT_PREAMBLE;
1083 if (!g_linux_wlan->oup.wlan_cfg_set(0, WID_PREAMBLE, c_val, 1, 0, 0))
1084 goto _fail_;
1085
1086 c_val[0] = AUTO_PROT;
1087 if (!g_linux_wlan->oup.wlan_cfg_set(0, WID_11N_PROT_MECH, c_val, 1, 0, 0))
1088 goto _fail_;
1089
1090 #ifdef SWITCH_LOG_TERMINAL
1091 c_val[0] = AUTO_PROT;
1092 if (!g_linux_wlan->oup.wlan_cfg_set(0, WID_LOGTerminal_Switch, c_val, 1, 0, 0))
1093 goto _fail_;
1094 #endif
1095
1096 c_val[0] = ACTIVE_SCAN;
1097 if (!g_linux_wlan->oup.wlan_cfg_set(0, WID_SCAN_TYPE, c_val, 1, 0, 0))
1098 goto _fail_;
1099
1100 c_val[0] = SITE_SURVEY_OFF;
1101 if (!g_linux_wlan->oup.wlan_cfg_set(0, WID_SITE_SURVEY, c_val, 1, 0, 0))
1102 goto _fail_;
1103
1104 *((int *)c_val) = 0xffff; /* Never use RTS-CTS */
1105 if (!g_linux_wlan->oup.wlan_cfg_set(0, WID_RTS_THRESHOLD, c_val, 2, 0, 0))
1106 goto _fail_;
1107
1108 *((int *)c_val) = 2346;
1109 if (!g_linux_wlan->oup.wlan_cfg_set(0, WID_FRAG_THRESHOLD, c_val, 2, 0, 0))
1110 goto _fail_;
1111
1112 /* SSID */
1113 /* -------------------------------------------------------------- */
1114 /* Configuration : String with length less than 32 bytes */
1115 /* Values to set : Any string with length less than 32 bytes */
1116 /* ( In BSS Station Set SSID to "" (null string) */
1117 /* to enable Broadcast SSID suppport ) */
1118 /* -------------------------------------------------------------- */
1119 #ifndef USE_WIRELESS
1120 strcpy(c_val, "nwifi");
1121 if (!g_linux_wlan->oup.wlan_cfg_set(0, WID_SSID, c_val, (strlen(c_val) + 1), 0, 0))
1122 goto _fail_;
1123 #endif
1124
1125 c_val[0] = 0;
1126 if (!g_linux_wlan->oup.wlan_cfg_set(0, WID_BCAST_SSID, c_val, 1, 0, 0))
1127 goto _fail_;
1128
1129 c_val[0] = 1;
1130 if (!g_linux_wlan->oup.wlan_cfg_set(0, WID_QOS_ENABLE, c_val, 1, 0, 0))
1131 goto _fail_;
1132
1133 c_val[0] = NO_POWERSAVE;
1134 if (!g_linux_wlan->oup.wlan_cfg_set(0, WID_POWER_MANAGEMENT, c_val, 1, 0, 0))
1135 goto _fail_;
1136
1137 c_val[0] = NO_ENCRYPT; /* NO_ENCRYPT, 0x79 */
1138 if (!g_linux_wlan->oup.wlan_cfg_set(0, WID_11I_MODE, c_val, 1, 0, 0))
1139 goto _fail_;
1140
1141 c_val[0] = OPEN_SYSTEM;
1142 if (!g_linux_wlan->oup.wlan_cfg_set(0, WID_AUTH_TYPE, c_val, 1, 0, 0))
1143 goto _fail_;
1144
1145 /* WEP/802 11I Configuration */
1146 /* ------------------------------------------------------------------ */
1147 /* Configuration : WEP Key */
1148 /* Values (0x) : 5 byte for WEP40 and 13 bytes for WEP104 */
1149 /* In case more than 5 bytes are passed on for WEP 40 */
1150 /* only first 5 bytes will be used as the key */
1151 /* ------------------------------------------------------------------ */
1152
1153 strcpy(c_val, "123456790abcdef1234567890");
1154 if (!g_linux_wlan->oup.wlan_cfg_set(0, WID_WEP_KEY_VALUE, c_val, (strlen(c_val) + 1), 0, 0))
1155 goto _fail_;
1156
1157 /* WEP/802 11I Configuration */
1158 /* ------------------------------------------------------------------ */
1159 /* Configuration : AES/TKIP WPA/RSNA Pre-Shared Key */
1160 /* Values to set : Any string with length greater than equal to 8 bytes */
1161 /* and less than 64 bytes */
1162 /* ------------------------------------------------------------------ */
1163 strcpy(c_val, "12345678");
1164 if (!g_linux_wlan->oup.wlan_cfg_set(0, WID_11I_PSK, c_val, (strlen(c_val)), 0, 0))
1165 goto _fail_;
1166
1167 /* IEEE802.1X Key Configuration */
1168 /* ------------------------------------------------------------------ */
1169 /* Configuration : Radius Server Access Secret Key */
1170 /* Values to set : Any string with length greater than equal to 8 bytes */
1171 /* and less than 65 bytes */
1172 /* ------------------------------------------------------------------ */
1173 strcpy(c_val, "password");
1174 if (!g_linux_wlan->oup.wlan_cfg_set(0, WID_1X_KEY, c_val, (strlen(c_val) + 1), 0, 0))
1175 goto _fail_;
1176
1177 /* IEEE802.1X Server Address Configuration */
1178 /* ------------------------------------------------------------------ */
1179 /* Configuration : Radius Server IP Address */
1180 /* Values to set : Any valid IP Address */
1181 /* ------------------------------------------------------------------ */
1182 c_val[0] = 192;
1183 c_val[1] = 168;
1184 c_val[2] = 1;
1185 c_val[3] = 112;
1186 if (!g_linux_wlan->oup.wlan_cfg_set(0, WID_1X_SERV_ADDR, c_val, 4, 0, 0))
1187 goto _fail_;
1188
1189 c_val[0] = 3;
1190 if (!g_linux_wlan->oup.wlan_cfg_set(0, WID_LISTEN_INTERVAL, c_val, 1, 0, 0))
1191 goto _fail_;
1192
1193 c_val[0] = 3;
1194 if (!g_linux_wlan->oup.wlan_cfg_set(0, WID_DTIM_PERIOD, c_val, 1, 0, 0))
1195 goto _fail_;
1196
1197 c_val[0] = NORMAL_ACK;
1198 if (!g_linux_wlan->oup.wlan_cfg_set(0, WID_ACK_POLICY, c_val, 1, 0, 0))
1199 goto _fail_;
1200
1201 c_val[0] = 0;
1202 if (!g_linux_wlan->oup.wlan_cfg_set(0, WID_USER_CONTROL_ON_TX_POWER, c_val, 1, 0, 0))
1203 goto _fail_;
1204
1205 c_val[0] = 48;
1206 if (!g_linux_wlan->oup.wlan_cfg_set(0, WID_TX_POWER_LEVEL_11A, c_val, 1, 0, 0))
1207 goto _fail_;
1208
1209 c_val[0] = 28;
1210 if (!g_linux_wlan->oup.wlan_cfg_set(0, WID_TX_POWER_LEVEL_11B, c_val, 1, 0, 0))
1211 goto _fail_;
1212
1213 /* Beacon Interval */
1214 /* -------------------------------------------------------------------- */
1215 /* Configuration : Sets the beacon interval value */
1216 /* Values to set : Any 16-bit value */
1217 /* -------------------------------------------------------------------- */
1218
1219 *((int *)c_val) = 100;
1220 if (!g_linux_wlan->oup.wlan_cfg_set(0, WID_BEACON_INTERVAL, c_val, 2, 0, 0))
1221 goto _fail_;
1222
1223 c_val[0] = REKEY_DISABLE;
1224 if (!g_linux_wlan->oup.wlan_cfg_set(0, WID_REKEY_POLICY, c_val, 1, 0, 0))
1225 goto _fail_;
1226
1227 /* Rekey Time (s) (Used only when the Rekey policy is 2 or 4) */
1228 /* -------------------------------------------------------------------- */
1229 /* Configuration : Sets the Rekey Time (s) */
1230 /* Values to set : 32-bit value */
1231 /* -------------------------------------------------------------------- */
1232 *((int *)c_val) = 84600;
1233 if (!g_linux_wlan->oup.wlan_cfg_set(0, WID_REKEY_PERIOD, c_val, 4, 0, 0))
1234 goto _fail_;
1235
1236 /* Rekey Packet Count (in 1000s; used when Rekey Policy is 3) */
1237 /* -------------------------------------------------------------------- */
1238 /* Configuration : Sets Rekey Group Packet count */
1239 /* Values to set : 32-bit Value */
1240 /* -------------------------------------------------------------------- */
1241 *((int *)c_val) = 500;
1242 if (!g_linux_wlan->oup.wlan_cfg_set(0, WID_REKEY_PACKET_COUNT, c_val, 4, 0, 0))
1243 goto _fail_;
1244
1245 c_val[0] = 1;
1246 if (!g_linux_wlan->oup.wlan_cfg_set(0, WID_SHORT_SLOT_ALLOWED, c_val, 1, 0, 0))
1247 goto _fail_;
1248
1249 c_val[0] = G_SELF_CTS_PROT;
1250 if (!g_linux_wlan->oup.wlan_cfg_set(0, WID_11N_ERP_PROT_TYPE, c_val, 1, 0, 0))
1251 goto _fail_;
1252
1253 c_val[0] = 1; /* Enable N */
1254 if (!g_linux_wlan->oup.wlan_cfg_set(0, WID_11N_ENABLE, c_val, 1, 0, 0))
1255 goto _fail_;
1256
1257 c_val[0] = HT_MIXED_MODE;
1258 if (!g_linux_wlan->oup.wlan_cfg_set(0, WID_11N_OPERATING_MODE, c_val, 1, 0, 0))
1259 goto _fail_;
1260
1261 c_val[0] = 1; /* TXOP Prot disable in N mode: No RTS-CTS on TX A-MPDUs to save air-time. */
1262 if (!g_linux_wlan->oup.wlan_cfg_set(0, WID_11N_TXOP_PROT_DISABLE, c_val, 1, 0, 0))
1263 goto _fail_;
1264
1265 memcpy(c_val, mac_add, 6);
1266
1267 if (!g_linux_wlan->oup.wlan_cfg_set(0, WID_MAC_ADDR, c_val, 6, 0, 0))
1268 goto _fail_;
1269
1270 /**
1271 * AP only
1272 **/
1273 c_val[0] = DETECT_PROTECT_REPORT;
1274 if (!g_linux_wlan->oup.wlan_cfg_set(0, WID_11N_OBSS_NONHT_DETECTION, c_val, 1, 0, 0))
1275 goto _fail_;
1276
1277 c_val[0] = RTS_CTS_NONHT_PROT;
1278 if (!g_linux_wlan->oup.wlan_cfg_set(0, WID_11N_HT_PROT_TYPE, c_val, 1, 0, 0))
1279 goto _fail_;
1280
1281 c_val[0] = 0;
1282 if (!g_linux_wlan->oup.wlan_cfg_set(0, WID_11N_RIFS_PROT_ENABLE, c_val, 1, 0, 0))
1283 goto _fail_;
1284
1285 c_val[0] = MIMO_MODE;
1286 if (!g_linux_wlan->oup.wlan_cfg_set(0, WID_11N_SMPS_MODE, c_val, 1, 0, 0))
1287 goto _fail_;
1288
1289 c_val[0] = 7;
1290 if (!g_linux_wlan->oup.wlan_cfg_set(0, WID_11N_CURRENT_TX_MCS, c_val, 1, 0, 0))
1291 goto _fail_;
1292
1293 c_val[0] = 1; /* Enable N with immediate block ack. */
1294 if (!g_linux_wlan->oup.wlan_cfg_set(0, WID_11N_IMMEDIATE_BA_ENABLED, c_val, 1, 1, (u32)pstrWFIDrv))
1295 goto _fail_;
1296
1297 return 0;
1298
1299 _fail_:
1300 return -1;
1301 }
1302
1303 /**************************/
1304 void wilc1000_wlan_deinit(linux_wlan_t *nic)
1305 {
1306
1307 if (g_linux_wlan->wilc1000_initialized) {
1308
1309 printk("Deinitializing wilc1000 ...\n");
1310
1311 if (nic == NULL) {
1312 PRINT_ER("nic is NULL\n");
1313 return;
1314 }
1315
1316 #if defined(PLAT_ALLWINNER_A20) || defined(PLAT_ALLWINNER_A23) || defined(PLAT_ALLWINNER_A31)
1317 /* johnny : remove */
1318 PRINT_D(INIT_DBG, "skip wilc_bus_set_default_speed\n");
1319 #else
1320 wilc_bus_set_default_speed();
1321 #endif
1322
1323 PRINT_D(INIT_DBG, "Disabling IRQ\n");
1324 #if (!defined WILC_SDIO) || (defined WILC_SDIO_IRQ_GPIO)
1325 linux_wlan_disable_irq(IRQ_WAIT);
1326 #else
1327 #if defined(PLAT_ALLWINNER_A20) || defined(PLAT_ALLWINNER_A23) || defined(PLAT_ALLWINNER_A31)
1328
1329 #else
1330 linux_wlan_lock_mutex((void *)&g_linux_wlan->hif_cs);
1331 disable_sdio_interrupt();
1332 linux_wlan_unlock_mutex((void *)&g_linux_wlan->hif_cs);
1333 #endif
1334 #endif
1335
1336 /* not sure if the following unlocks are needed or not*/
1337 if (&g_linux_wlan->rxq_event != NULL)
1338 linux_wlan_unlock(&g_linux_wlan->rxq_event);
1339
1340 if (&g_linux_wlan->txq_event != NULL)
1341 linux_wlan_unlock(&g_linux_wlan->txq_event);
1342
1343 #if (RX_BH_TYPE == RX_BH_WORK_QUEUE)
1344 /*Removing the work struct from the linux kernel workqueue*/
1345 if (&g_linux_wlan->rx_work_queue != NULL)
1346 flush_work(&g_linux_wlan->rx_work_queue);
1347
1348 #elif (RX_BH_TYPE == RX_BH_KTHREAD)
1349 /* if(&nic->rx_sem != NULL) */
1350 /* linux_wlan_unlock(&nic->rx_sem); */
1351 #endif
1352
1353 PRINT_D(INIT_DBG, "Deinitializing Threads\n");
1354 wlan_deinitialize_threads(nic);
1355
1356 PRINT_D(INIT_DBG, "Deinitializing IRQ\n");
1357 deinit_irq(g_linux_wlan);
1358
1359 if (&g_linux_wlan->oup != NULL) {
1360 if (g_linux_wlan->oup.wlan_stop != NULL)
1361 g_linux_wlan->oup.wlan_stop();
1362 }
1363
1364 PRINT_D(INIT_DBG, "Deinitializing WILC Wlan\n");
1365 wilc_wlan_deinit(nic);
1366 #if (defined WILC_SDIO) && (!defined WILC_SDIO_IRQ_GPIO)
1367 #if defined(PLAT_ALLWINNER_A20) || defined(PLAT_ALLWINNER_A23) || defined(PLAT_ALLWINNER_A31)
1368 PRINT_D(INIT_DBG, "Disabling IRQ 2\n");
1369
1370 linux_wlan_lock_mutex((void *)&g_linux_wlan->hif_cs);
1371 disable_sdio_interrupt();
1372 linux_wlan_unlock_mutex((void *)&g_linux_wlan->hif_cs);
1373 #endif
1374 #endif
1375
1376 /*De-Initialize locks*/
1377 PRINT_D(INIT_DBG, "Deinitializing Locks\n");
1378 wlan_deinit_locks(g_linux_wlan);
1379
1380 /* announce that wilc1000 is not initialized */
1381 g_linux_wlan->wilc1000_initialized = 0;
1382
1383 PRINT_D(INIT_DBG, "wilc1000 deinitialization Done\n");
1384
1385 } else {
1386 PRINT_D(INIT_DBG, "wilc1000 is not initialized\n");
1387 }
1388 return;
1389 }
1390
1391 int wlan_init_locks(linux_wlan_t *p_nic)
1392 {
1393
1394 PRINT_D(INIT_DBG, "Initializing Locks ...\n");
1395
1396 /*initialize mutexes*/
1397 linux_wlan_init_mutex("hif_lock/hif_cs", &g_linux_wlan->hif_cs, 1);
1398 linux_wlan_init_mutex("rxq_lock/rxq_cs", &g_linux_wlan->rxq_cs, 1);
1399 linux_wlan_init_mutex("txq_lock/txq_cs", &g_linux_wlan->txq_cs, 1);
1400
1401 /*Added by Amr - BugID_4720*/
1402 linux_wlan_init_spin_lock("txq_spin_lock/txq_cs", &g_linux_wlan->txq_spinlock, 1);
1403
1404 /*Added by Amr - BugID_4720*/
1405 linux_wlan_init_lock("txq_add_to_head_lock/txq_cs", &g_linux_wlan->txq_add_to_head_cs, 1);
1406
1407 linux_wlan_init_lock("txq_wait/txq_event", &g_linux_wlan->txq_event, 0);
1408 linux_wlan_init_lock("rxq_wait/rxq_event", &g_linux_wlan->rxq_event, 0);
1409
1410 linux_wlan_init_lock("cfg_wait/cfg_event", &g_linux_wlan->cfg_event, 0);
1411 linux_wlan_init_lock("sync_event", &g_linux_wlan->sync_event, 0);
1412
1413 linux_wlan_init_lock("rxq_lock/rxq_started", &g_linux_wlan->rxq_thread_started, 0);
1414 linux_wlan_init_lock("rxq_lock/txq_started", &g_linux_wlan->txq_thread_started, 0);
1415
1416 #if (RX_BH_TYPE == RX_BH_KTHREAD)
1417 linux_wlan_init_lock("BH_SEM", &g_linux_wlan->rx_sem, 0);
1418 #endif
1419
1420 return 0;
1421 }
1422
1423 static int wlan_deinit_locks(linux_wlan_t *nic)
1424 {
1425 PRINT_D(INIT_DBG, "De-Initializing Locks\n");
1426
1427 if (&g_linux_wlan->hif_cs != NULL)
1428 linux_wlan_deinit_mutex(&g_linux_wlan->hif_cs);
1429
1430 if (&g_linux_wlan->rxq_cs != NULL)
1431 linux_wlan_deinit_mutex(&g_linux_wlan->rxq_cs);
1432
1433 if (&g_linux_wlan->txq_cs != NULL)
1434 linux_wlan_deinit_mutex(&g_linux_wlan->txq_cs);
1435
1436 /*Added by Amr - BugID_4720*/
1437 if (&g_linux_wlan->txq_spinlock != NULL)
1438 linux_wlan_deinit_spin_lock(&g_linux_wlan->txq_spinlock);
1439
1440 if (&g_linux_wlan->rxq_event != NULL)
1441 linux_wlan_deinit_lock(&g_linux_wlan->rxq_event);
1442
1443 if (&g_linux_wlan->txq_event != NULL)
1444 linux_wlan_deinit_lock(&g_linux_wlan->txq_event);
1445
1446 /*Added by Amr - BugID_4720*/
1447 if (&g_linux_wlan->txq_add_to_head_cs != NULL)
1448 linux_wlan_deinit_lock(&g_linux_wlan->txq_add_to_head_cs);
1449
1450 if (&g_linux_wlan->rxq_thread_started != NULL)
1451 linux_wlan_deinit_lock(&g_linux_wlan->rxq_thread_started);
1452
1453 if (&g_linux_wlan->txq_thread_started != NULL)
1454 linux_wlan_deinit_lock(&g_linux_wlan->txq_thread_started);
1455
1456 if (&g_linux_wlan->cfg_event != NULL)
1457 linux_wlan_deinit_lock(&g_linux_wlan->cfg_event);
1458
1459 if (&g_linux_wlan->sync_event != NULL)
1460 linux_wlan_deinit_lock(&g_linux_wlan->sync_event);
1461
1462 return 0;
1463 }
1464 void linux_to_wlan(wilc_wlan_inp_t *nwi, linux_wlan_t *nic)
1465 {
1466
1467 PRINT_D(INIT_DBG, "Linux to Wlan services ...\n");
1468
1469 nwi->os_context.hif_critical_section = (void *)&g_linux_wlan->hif_cs;
1470 nwi->os_context.os_private = (void *)nic;
1471 nwi->os_context.tx_buffer_size = LINUX_TX_SIZE;
1472 nwi->os_context.txq_critical_section = (void *)&g_linux_wlan->txq_cs;
1473
1474 /*Added by Amr - BugID_4720*/
1475 nwi->os_context.txq_add_to_head_critical_section = (void *)&g_linux_wlan->txq_add_to_head_cs;
1476
1477 /*Added by Amr - BugID_4720*/
1478 nwi->os_context.txq_spin_lock = (void *)&g_linux_wlan->txq_spinlock;
1479
1480 nwi->os_context.txq_wait_event = (void *)&g_linux_wlan->txq_event;
1481
1482 #if defined(MEMORY_STATIC)
1483 nwi->os_context.rx_buffer_size = LINUX_RX_SIZE;
1484 #endif
1485 nwi->os_context.rxq_critical_section = (void *)&g_linux_wlan->rxq_cs;
1486 nwi->os_context.rxq_wait_event = (void *)&g_linux_wlan->rxq_event;
1487 nwi->os_context.cfg_wait_event = (void *)&g_linux_wlan->cfg_event;
1488
1489 nwi->os_func.os_sleep = linux_wlan_msleep;
1490 nwi->os_func.os_atomic_sleep = linux_wlan_atomic_msleep;
1491 nwi->os_func.os_debug = linux_wlan_dbg;
1492 nwi->os_func.os_malloc = linux_wlan_malloc;
1493 nwi->os_func.os_malloc_atomic = linux_wlan_malloc_atomic;
1494 nwi->os_func.os_free = linux_wlan_free;
1495 nwi->os_func.os_lock = linux_wlan_lock;
1496 nwi->os_func.os_unlock = linux_wlan_unlock;
1497 nwi->os_func.os_wait = linux_wlan_lock_timeout;
1498 nwi->os_func.os_signal = linux_wlan_unlock;
1499 nwi->os_func.os_enter_cs = linux_wlan_lock_mutex;
1500 nwi->os_func.os_leave_cs = linux_wlan_unlock_mutex;
1501
1502 /*Added by Amr - BugID_4720*/
1503 nwi->os_func.os_spin_lock = linux_wlan_spin_lock;
1504 nwi->os_func.os_spin_unlock = linux_wlan_spin_unlock;
1505
1506 #ifdef WILC_SDIO
1507 nwi->io_func.io_type = HIF_SDIO;
1508 nwi->io_func.io_init = linux_sdio_init;
1509 nwi->io_func.io_deinit = linux_sdio_deinit;
1510 nwi->io_func.u.sdio.sdio_cmd52 = linux_sdio_cmd52;
1511 nwi->io_func.u.sdio.sdio_cmd53 = linux_sdio_cmd53;
1512 nwi->io_func.u.sdio.sdio_set_max_speed = linux_sdio_set_max_speed;
1513 nwi->io_func.u.sdio.sdio_set_default_speed = linux_sdio_set_default_speed;
1514 #else
1515 nwi->io_func.io_type = HIF_SPI;
1516 nwi->io_func.io_init = linux_spi_init;
1517 nwi->io_func.io_deinit = linux_spi_deinit;
1518 nwi->io_func.u.spi.spi_tx = linux_spi_write;
1519 nwi->io_func.u.spi.spi_rx = linux_spi_read;
1520 nwi->io_func.u.spi.spi_trx = linux_spi_write_read;
1521 nwi->io_func.u.spi.spi_max_speed = linux_spi_set_max_speed;
1522 #endif
1523
1524 /*for now - to be revised*/
1525 #ifdef WILC_FULLY_HOSTING_AP
1526 /* incase of Fully hosted AP, all non cfg pkts are processed here*/
1527 nwi->net_func.rx_indicate = WILC_Process_rx_frame;
1528 #else
1529 nwi->net_func.rx_indicate = frmw_to_linux;
1530 #endif
1531 nwi->net_func.rx_complete = linux_wlan_rx_complete;
1532 nwi->indicate_func.mac_indicate = linux_wlan_mac_indicate;
1533 }
1534
1535 int wlan_initialize_threads(perInterface_wlan_t *nic)
1536 {
1537
1538 int ret = 0;
1539 PRINT_D(INIT_DBG, "Initializing Threads ...\n");
1540
1541 #if (RX_BH_TYPE == RX_BH_WORK_QUEUE)
1542 /*Initialize rx work queue task*/
1543 INIT_WORK(&g_linux_wlan->rx_work_queue, isr_bh_routine);
1544 #elif (RX_BH_TYPE == RX_BH_KTHREAD)
1545 PRINT_D(INIT_DBG, "Creating kthread for Rxq BH\n");
1546 g_linux_wlan->rx_bh_thread = kthread_run(isr_bh_routine, (void *)g_linux_wlan, "K_RXQ_BH");
1547 if (g_linux_wlan->rx_bh_thread == 0) {
1548 PRINT_ER("couldn't create RX BH thread\n");
1549 ret = -ENOBUFS;
1550 goto _fail_;
1551 }
1552 #endif
1553
1554 #ifndef TCP_ENHANCEMENTS
1555 /* create rx task */
1556 PRINT_D(INIT_DBG, "Creating kthread for reception\n");
1557 g_linux_wlan->rxq_thread = kthread_run(linux_wlan_rxq_task, (void *)g_linux_wlan, "K_RXQ_TASK");
1558 if (g_linux_wlan->rxq_thread == 0) {
1559 PRINT_ER("couldn't create RXQ thread\n");
1560 ret = -ENOBUFS;
1561 goto _fail_1;
1562 }
1563
1564 /* wait for RXQ task to start. */
1565 linux_wlan_lock(&g_linux_wlan->rxq_thread_started);
1566
1567 #endif
1568
1569 /* create tx task */
1570 PRINT_D(INIT_DBG, "Creating kthread for transmission\n");
1571 g_linux_wlan->txq_thread = kthread_run(linux_wlan_txq_task, (void *)g_linux_wlan, "K_TXQ_TASK");
1572 if (g_linux_wlan->txq_thread == 0) {
1573 PRINT_ER("couldn't create TXQ thread\n");
1574 ret = -ENOBUFS;
1575 goto _fail_2;
1576 }
1577 #ifdef DEBUG_MODE
1578 PRINT_D(INIT_DBG, "Creating kthread for Debugging\n");
1579 g_linux_wlan->txq_thread = kthread_run(DebuggingThreadTask, (void *)g_linux_wlan, "DebugThread");
1580 if (g_linux_wlan->txq_thread == 0) {
1581 PRINT_ER("couldn't create TXQ thread\n");
1582 ret = -ENOBUFS;
1583 goto _fail_2;
1584 }
1585 #endif
1586 /* wait for TXQ task to start. */
1587 linux_wlan_lock(&g_linux_wlan->txq_thread_started);
1588
1589 return 0;
1590
1591 _fail_2:
1592 /*De-Initialize 2nd thread*/
1593 g_linux_wlan->close = 1;
1594 linux_wlan_unlock(&g_linux_wlan->rxq_event);
1595 kthread_stop(g_linux_wlan->rxq_thread);
1596
1597 #ifndef TCP_ENHANCEMENTS
1598 _fail_1:
1599 #endif
1600 #if (RX_BH_TYPE == RX_BH_KTHREAD)
1601 /*De-Initialize 1st thread*/
1602 g_linux_wlan->close = 1;
1603 linux_wlan_unlock(&g_linux_wlan->rx_sem);
1604 kthread_stop(g_linux_wlan->rx_bh_thread);
1605 _fail_:
1606 #endif
1607 g_linux_wlan->close = 0;
1608 return ret;
1609 }
1610
1611 static void wlan_deinitialize_threads(linux_wlan_t *nic)
1612 {
1613
1614 g_linux_wlan->close = 1;
1615 PRINT_D(INIT_DBG, "Deinitializing Threads\n");
1616 if (&g_linux_wlan->rxq_event != NULL)
1617 linux_wlan_unlock(&g_linux_wlan->rxq_event);
1618
1619 if (g_linux_wlan->rxq_thread != NULL) {
1620 kthread_stop(g_linux_wlan->rxq_thread);
1621 g_linux_wlan->rxq_thread = NULL;
1622 }
1623
1624 if (&g_linux_wlan->txq_event != NULL)
1625 linux_wlan_unlock(&g_linux_wlan->txq_event);
1626
1627 if (g_linux_wlan->txq_thread != NULL) {
1628 kthread_stop(g_linux_wlan->txq_thread);
1629 g_linux_wlan->txq_thread = NULL;
1630 }
1631
1632 #if (RX_BH_TYPE == RX_BH_KTHREAD)
1633 if (&g_linux_wlan->rx_sem != NULL)
1634 linux_wlan_unlock(&g_linux_wlan->rx_sem);
1635
1636 if (g_linux_wlan->rx_bh_thread != NULL) {
1637 kthread_stop(g_linux_wlan->rx_bh_thread);
1638 g_linux_wlan->rx_bh_thread = NULL;
1639 }
1640 #endif
1641 }
1642
1643 #ifdef STATIC_MACADDRESS
1644 const char *path_string[] = {
1645 "/etc/wlan",
1646 "/data/wlan",
1647 };
1648
1649 static int linux_wlan_read_mac_addr(void *vp)
1650 {
1651 int ret = 0;
1652 struct file *fp = (struct file *)-ENOENT;
1653 mm_segment_t old_fs;
1654 loff_t pos = 0;
1655 int index;
1656 int array_size = ARRAY_SIZE(path_string);
1657
1658 /* change to KERNEL_DS address limit */
1659 old_fs = get_fs();
1660 set_fs(KERNEL_DS);
1661
1662 for (index = 0; index < array_size; index++) {
1663 fp = filp_open(path_string[index], O_WRONLY, 0640);
1664 if (!fp) {
1665 ret = -1;
1666 goto exit;
1667 }
1668
1669 /*No such file or directory */
1670 if (IS_ERR(fp) || !fp->f_op) {
1671 get_random_bytes(&mac_add[3], 3);
1672 /* open file to write */
1673 fp = filp_open(path_string[index], O_WRONLY | O_CREAT, 0640);
1674
1675 if (!fp || IS_ERR(fp)) {
1676 ret = -1;
1677 continue;
1678 } else {
1679 /* write buf to file */
1680 fp->f_op->write(fp, mac_add, 6, &pos);
1681 break;
1682 }
1683 } else {
1684 /* read file to buf */
1685 fp->f_op->read(fp, mac_add, 6, &pos);
1686 break;
1687 }
1688 }
1689
1690 if (index == array_size)
1691 PRINT_ER("random MAC\n");
1692
1693 exit:
1694 if (fp && !IS_ERR(fp))
1695 filp_close(fp, NULL);
1696
1697 set_fs(old_fs);
1698
1699 return ret;
1700 }
1701 #endif
1702
1703 #ifdef COMPLEMENT_BOOT
1704
1705 extern volatile int probe;
1706 extern uint8_t core_11b_ready(void);
1707
1708 #define READY_CHECK_THRESHOLD 30
1709 extern void wilc_wlan_global_reset(void);
1710 uint8_t wilc1000_prepare_11b_core(wilc_wlan_inp_t *nwi, wilc_wlan_oup_t *nwo, linux_wlan_t *nic)
1711 {
1712 uint8_t trials = 0;
1713 while ((core_11b_ready() && (READY_CHECK_THRESHOLD > (trials++)))) {
1714 PRINT_D(INIT_DBG, "11b core not ready yet: %u\n", trials);
1715 wilc_wlan_deinit(nic);
1716 wilc_wlan_global_reset();
1717 sdio_unregister_driver(&wilc_bus);
1718
1719 linux_wlan_device_detection(0);
1720
1721 mdelay(100);
1722
1723 linux_wlan_device_detection(1);
1724
1725 sdio_register_driver(&wilc_bus);
1726
1727 while (!probe)
1728 msleep(100);
1729 probe = 0;
1730 g_linux_wlan->wilc_sdio_func = local_sdio_func;
1731 linux_to_wlan(nwi, nic);
1732 wilc_wlan_init(nwi, nwo);
1733 }
1734
1735 if (READY_CHECK_THRESHOLD <= trials)
1736 return 1;
1737 else
1738 return 0;
1739
1740 }
1741
1742 int repeat_power_cycle(perInterface_wlan_t *nic)
1743 {
1744 int ret = 0;
1745 wilc_wlan_inp_t nwi;
1746 wilc_wlan_oup_t nwo;
1747 sdio_unregister_driver(&wilc_bus);
1748
1749 linux_wlan_device_detection(0);
1750 linux_wlan_device_power(0);
1751 msleep(100);
1752 linux_wlan_device_power(1);
1753 msleep(80);
1754 linux_wlan_device_detection(1);
1755 msleep(20);
1756
1757 sdio_register_driver(&wilc_bus);
1758
1759 /* msleep(1000); */
1760 while (!probe)
1761 msleep(100);
1762 probe = 0;
1763 g_linux_wlan->wilc_sdio_func = local_sdio_func;
1764 linux_to_wlan(&nwi, g_linux_wlan);
1765 ret = wilc_wlan_init(&nwi, &nwo);
1766
1767 g_linux_wlan->mac_status = WILC_MAC_STATUS_INIT;
1768 #if (defined WILC_SDIO) && (!defined WILC_SDIO_IRQ_GPIO)
1769 enable_sdio_interrupt();
1770 #endif
1771
1772 if (linux_wlan_get_firmware(nic)) {
1773 PRINT_ER("Can't get firmware\n");
1774 ret = -1;
1775 goto __fail__;
1776 }
1777
1778 /*Download firmware*/
1779 ret = linux_wlan_firmware_download(g_linux_wlan);
1780 if (ret < 0) {
1781 PRINT_ER("Failed to download firmware\n");
1782 goto __fail__;
1783 }
1784 /* Start firmware*/
1785 ret = linux_wlan_start_firmware(nic);
1786 if (ret < 0)
1787 PRINT_ER("Failed to start firmware\n");
1788 __fail__:
1789 return ret;
1790 }
1791 #endif
1792
1793 int wilc1000_wlan_init(struct net_device *dev, perInterface_wlan_t *p_nic)
1794 {
1795 wilc_wlan_inp_t nwi;
1796 wilc_wlan_oup_t nwo;
1797 perInterface_wlan_t *nic = p_nic;
1798 int ret = 0;
1799
1800 if (!g_linux_wlan->wilc1000_initialized) {
1801 g_linux_wlan->mac_status = WILC_MAC_STATUS_INIT;
1802 g_linux_wlan->close = 0;
1803 g_linux_wlan->wilc1000_initialized = 0;
1804
1805 wlan_init_locks(g_linux_wlan);
1806
1807 #ifdef STATIC_MACADDRESS
1808 wilc_mac_thread = kthread_run(linux_wlan_read_mac_addr, NULL, "wilc_mac_thread");
1809 if (wilc_mac_thread < 0)
1810 PRINT_ER("couldn't create Mac addr thread\n");
1811 #endif
1812
1813 linux_to_wlan(&nwi, g_linux_wlan);
1814
1815 ret = wilc_wlan_init(&nwi, &nwo);
1816 if (ret < 0) {
1817 PRINT_ER("Initializing WILC_Wlan FAILED\n");
1818 ret = -EIO;
1819 goto _fail_locks_;
1820 }
1821 memcpy(&g_linux_wlan->oup, &nwo, sizeof(wilc_wlan_oup_t));
1822
1823 /*Save the oup structre into global pointer*/
1824 gpstrWlanOps = &g_linux_wlan->oup;
1825
1826 ret = wlan_initialize_threads(nic);
1827 if (ret < 0) {
1828 PRINT_ER("Initializing Threads FAILED\n");
1829 ret = -EIO;
1830 goto _fail_wilc_wlan_;
1831 }
1832
1833 #if (defined WILC_SDIO) && (defined COMPLEMENT_BOOT)
1834 if (wilc1000_prepare_11b_core(&nwi, &nwo, g_linux_wlan)) {
1835 PRINT_ER("11b Core is not ready\n");
1836 ret = -EIO;
1837 goto _fail_threads_;
1838 }
1839 #endif
1840
1841 #if (!defined WILC_SDIO) || (defined WILC_SDIO_IRQ_GPIO)
1842 if (init_irq(g_linux_wlan)) {
1843 PRINT_ER("couldn't initialize IRQ\n");
1844 ret = -EIO;
1845 goto _fail_threads_;
1846 }
1847 #endif
1848
1849 #if (defined WILC_SDIO) && (!defined WILC_SDIO_IRQ_GPIO)
1850 if (enable_sdio_interrupt()) {
1851 PRINT_ER("couldn't initialize IRQ\n");
1852 ret = -EIO;
1853 goto _fail_irq_init_;
1854 }
1855 #endif
1856
1857 if (linux_wlan_get_firmware(nic)) {
1858 PRINT_ER("Can't get firmware\n");
1859 ret = -EIO;
1860 goto _fail_irq_enable_;
1861 }
1862
1863 /*Download firmware*/
1864 ret = linux_wlan_firmware_download(g_linux_wlan);
1865 if (ret < 0) {
1866 PRINT_ER("Failed to download firmware\n");
1867 ret = -EIO;
1868 goto _fail_irq_enable_;
1869 }
1870
1871 /* Start firmware*/
1872 ret = linux_wlan_start_firmware(nic);
1873 if (ret < 0) {
1874 PRINT_ER("Failed to start firmware\n");
1875 ret = -EIO;
1876 goto _fail_irq_enable_;
1877 }
1878
1879 wilc_bus_set_max_speed();
1880
1881 if (g_linux_wlan->oup.wlan_cfg_get(1, WID_FIRMWARE_VERSION, 1, 0)) {
1882 int size;
1883 char Firmware_ver[20];
1884 size = g_linux_wlan->oup.wlan_cfg_get_value(
1885 WID_FIRMWARE_VERSION,
1886 Firmware_ver, sizeof(Firmware_ver));
1887 Firmware_ver[size] = '\0';
1888 PRINT_D(INIT_DBG, "***** Firmware Ver = %s *******\n", Firmware_ver);
1889 }
1890 /* Initialize firmware with default configuration */
1891 ret = linux_wlan_init_test_config(dev, g_linux_wlan);
1892
1893 if (ret < 0) {
1894 PRINT_ER("Failed to configure firmware\n");
1895 ret = -EIO;
1896 goto _fail_fw_start_;
1897 }
1898
1899 g_linux_wlan->wilc1000_initialized = 1;
1900 return 0; /*success*/
1901
1902 _fail_fw_start_:
1903 if (&g_linux_wlan->oup != NULL) {
1904 if (g_linux_wlan->oup.wlan_stop != NULL)
1905 g_linux_wlan->oup.wlan_stop();
1906 }
1907
1908 _fail_irq_enable_:
1909 #if (defined WILC_SDIO) && (!defined WILC_SDIO_IRQ_GPIO)
1910 disable_sdio_interrupt();
1911 _fail_irq_init_:
1912 #endif
1913 #if (!defined WILC_SDIO) || (defined WILC_SDIO_IRQ_GPIO)
1914 deinit_irq(g_linux_wlan);
1915
1916 #endif
1917 _fail_threads_:
1918 wlan_deinitialize_threads(g_linux_wlan);
1919 _fail_wilc_wlan_:
1920 wilc_wlan_deinit(g_linux_wlan);
1921 _fail_locks_:
1922 wlan_deinit_locks(g_linux_wlan);
1923 PRINT_ER("WLAN Iinitialization FAILED\n");
1924 } else {
1925 PRINT_D(INIT_DBG, "wilc1000 already initialized\n");
1926 }
1927 return ret;
1928 }
1929
1930 /*
1931 * - this function will be called automatically by OS when module inserted.
1932 */
1933
1934 #if !defined(NM73131_0_BOARD)
1935 int mac_init_fn(struct net_device *ndev)
1936 {
1937
1938 /*Why we do this !!!*/
1939 netif_start_queue(ndev); /* ma */
1940 netif_stop_queue(ndev); /* ma */
1941
1942 return 0;
1943 }
1944 #else
1945 int mac_init_fn(struct net_device *ndev)
1946 {
1947
1948 unsigned char mac_add[] = {0x00, 0x50, 0xc2, 0x5e, 0x10, 0x00};
1949 /* TODO: get MAC address whenever the source is EPROM - hardcoded and copy it to ndev*/
1950 memcpy(ndev->dev_addr, mac_add, 6);
1951
1952 if (!is_valid_ether_addr(ndev->dev_addr)) {
1953 PRINT_ER("Error: Wrong MAC address\n");
1954 return -EINVAL;
1955 }
1956
1957 return 0;
1958 }
1959 #endif
1960
1961 void WILC_WFI_frame_register(struct wiphy *wiphy, struct net_device *dev,
1962 u16 frame_type, bool reg);
1963
1964 /* This fn is called, when this device is setup using ifconfig */
1965 #if !defined(NM73131_0_BOARD)
1966 int mac_open(struct net_device *ndev)
1967 {
1968 perInterface_wlan_t *nic;
1969
1970 /*BugID_5213*/
1971 /*No need for setting mac address here anymore,*/
1972 /*Just set it in init_test_config()*/
1973 unsigned char mac_add[ETH_ALEN] = {0};
1974 int ret = 0;
1975 int i = 0;
1976 struct WILC_WFI_priv *priv;
1977
1978 nic = netdev_priv(ndev);
1979 priv = wiphy_priv(nic->wilc_netdev->ieee80211_ptr->wiphy);
1980 PRINT_D(INIT_DBG, "MAC OPEN[%p]\n", ndev);
1981
1982 #ifdef USE_WIRELESS
1983 ret = WILC_WFI_InitHostInt(ndev);
1984 if (ret < 0) {
1985 PRINT_ER("Failed to initialize host interface\n");
1986
1987 return ret;
1988 }
1989 #endif
1990
1991 /*initialize platform*/
1992 PRINT_D(INIT_DBG, "*** re-init ***\n");
1993 ret = wilc1000_wlan_init(ndev, nic);
1994 if (ret < 0) {
1995 PRINT_ER("Failed to initialize wilc1000\n");
1996 WILC_WFI_DeInitHostInt(ndev);
1997 return ret;
1998 }
1999
2000 Set_machw_change_vir_if(false);
2001
2002 host_int_get_MacAddress(priv->hWILCWFIDrv, mac_add);
2003 PRINT_D(INIT_DBG, "Mac address: %x:%x:%x:%x:%x:%x\n", mac_add[0], mac_add[1], mac_add[2],
2004 mac_add[3], mac_add[4], mac_add[5]);
2005
2006 /* loop through the NUM of supported devices and set the MAC address */
2007 for (i = 0; i < g_linux_wlan->u8NoIfcs; i++) {
2008 if (ndev == g_linux_wlan->strInterfaceInfo[i].wilc_netdev) {
2009 memcpy(g_linux_wlan->strInterfaceInfo[i].aSrcAddress, mac_add, ETH_ALEN);
2010 g_linux_wlan->strInterfaceInfo[i].drvHandler = priv->hWILCWFIDrv;
2011 break;
2012 }
2013 }
2014
2015 /* TODO: get MAC address whenever the source is EPROM - hardcoded and copy it to ndev*/
2016 memcpy(ndev->dev_addr, g_linux_wlan->strInterfaceInfo[i].aSrcAddress, ETH_ALEN);
2017
2018 if (!is_valid_ether_addr(ndev->dev_addr)) {
2019 PRINT_ER("Error: Wrong MAC address\n");
2020 ret = -EINVAL;
2021 goto _err_;
2022 }
2023
2024 WILC_WFI_frame_register(nic->wilc_netdev->ieee80211_ptr->wiphy, nic->wilc_netdev,
2025 nic->g_struct_frame_reg[0].frame_type, nic->g_struct_frame_reg[0].reg);
2026 WILC_WFI_frame_register(nic->wilc_netdev->ieee80211_ptr->wiphy, nic->wilc_netdev,
2027 nic->g_struct_frame_reg[1].frame_type, nic->g_struct_frame_reg[1].reg);
2028 netif_wake_queue(ndev);
2029 g_linux_wlan->open_ifcs++;
2030 nic->mac_opened = 1;
2031 return 0;
2032
2033 _err_:
2034 WILC_WFI_DeInitHostInt(ndev);
2035 wilc1000_wlan_deinit(g_linux_wlan);
2036 return ret;
2037 }
2038 #else
2039 int mac_open(struct net_device *ndev)
2040 {
2041
2042 linux_wlan_t *nic;
2043 nic = netdev_priv(ndev);
2044
2045 /*initialize platform*/
2046 if (wilc1000_wlan_init(nic)) {
2047 PRINT_ER("Failed to initialize platform\n");
2048 return 1;
2049 }
2050 /* Start the network interface queue for this device */
2051 PRINT_D(INIT_DBG, "Starting netifQ\n");
2052 netif_start_queue(ndev);
2053 /* linux_wlan_lock(&close_exit_sync); */
2054 return 0;
2055 }
2056 #endif
2057
2058 struct net_device_stats *mac_stats(struct net_device *dev)
2059 {
2060 perInterface_wlan_t *nic = netdev_priv(dev);
2061
2062 return &nic->netstats;
2063 }
2064
2065 /* Setup the multicast filter */
2066 static void wilc_set_multicast_list(struct net_device *dev)
2067 {
2068
2069 struct netdev_hw_addr *ha;
2070 struct WILC_WFI_priv *priv;
2071 tstrWILC_WFIDrv *pstrWFIDrv;
2072 int i = 0;
2073 priv = wiphy_priv(dev->ieee80211_ptr->wiphy);
2074 pstrWFIDrv = (tstrWILC_WFIDrv *)priv->hWILCWFIDrv;
2075
2076 if (!dev)
2077 return;
2078
2079 PRINT_D(INIT_DBG, "Setting Multicast List with count = %d.\n", dev->mc.count);
2080
2081 if (dev->flags & IFF_PROMISC) {
2082 /* Normally, we should configure the chip to retrive all packets
2083 * but we don't wanna support this right now */
2084 /* TODO: add promiscuous mode support */
2085 PRINT_D(INIT_DBG, "Set promiscuous mode ON, retrive all packets\n");
2086 return;
2087 }
2088
2089 /* If there's more addresses than we handle, get all multicast
2090 * packets and sort them out in software. */
2091 if ((dev->flags & IFF_ALLMULTI) || (dev->mc.count) > WILC_MULTICAST_TABLE_SIZE) {
2092 PRINT_D(INIT_DBG, "Disable multicast filter, retrive all multicast packets\n");
2093 /* get all multicast packets */
2094 host_int_setup_multicast_filter(pstrWFIDrv, false, 0);
2095 return;
2096 }
2097
2098 /* No multicast? Just get our own stuff */
2099 if ((dev->mc.count) == 0) {
2100 PRINT_D(INIT_DBG, "Enable multicast filter, retrive directed packets only.\n");
2101 host_int_setup_multicast_filter(pstrWFIDrv, true, 0);
2102 return;
2103 }
2104
2105 /* Store all of the multicast addresses in the hardware filter */
2106 netdev_for_each_mc_addr(ha, dev)
2107 {
2108 memcpy(gau8MulticastMacAddrList[i], ha->addr, ETH_ALEN);
2109 PRINT_D(INIT_DBG, "Entry[%d]: %x:%x:%x:%x:%x:%x\n", i,
2110 gau8MulticastMacAddrList[i][0], gau8MulticastMacAddrList[i][1], gau8MulticastMacAddrList[i][2], gau8MulticastMacAddrList[i][3], gau8MulticastMacAddrList[i][4], gau8MulticastMacAddrList[i][5]);
2111 i++;
2112 }
2113
2114 host_int_setup_multicast_filter(pstrWFIDrv, true, (dev->mc.count));
2115
2116 return;
2117
2118 }
2119
2120 static void linux_wlan_tx_complete(void *priv, int status)
2121 {
2122
2123 struct tx_complete_data *pv_data = (struct tx_complete_data *)priv;
2124 if (status == 1)
2125 PRINT_D(TX_DBG, "Packet sent successfully - Size = %d - Address = %p - SKB = %p\n", pv_data->size, pv_data->buff, pv_data->skb);
2126 else
2127 PRINT_D(TX_DBG, "Couldn't send packet - Size = %d - Address = %p - SKB = %p\n", pv_data->size, pv_data->buff, pv_data->skb);
2128 /* Free the SK Buffer, its work is done */
2129 dev_kfree_skb(pv_data->skb);
2130 linux_wlan_free(pv_data);
2131 }
2132
2133 int mac_xmit(struct sk_buff *skb, struct net_device *ndev)
2134 {
2135 perInterface_wlan_t *nic;
2136 struct tx_complete_data *tx_data = NULL;
2137 int QueueCount;
2138 char *pu8UdpBuffer;
2139 struct iphdr *ih;
2140 struct ethhdr *eth_h;
2141 nic = netdev_priv(ndev);
2142
2143 PRINT_D(INT_DBG, "\n========\n IntUH: %d - IntBH: %d - IntCld: %d\n========\n", int_rcvdU, int_rcvdB, int_clrd);
2144 PRINT_D(TX_DBG, "Sending packet just received from TCP/IP\n");
2145
2146 /* Stop the network interface queue */
2147 if (skb->dev != ndev) {
2148 PRINT_ER("Packet not destined to this device\n");
2149 return 0;
2150 }
2151
2152 tx_data = (struct tx_complete_data *)internal_alloc(sizeof(struct tx_complete_data), GFP_ATOMIC);
2153 if (tx_data == NULL) {
2154 PRINT_ER("Failed to allocate memory for tx_data structure\n");
2155 dev_kfree_skb(skb);
2156 netif_wake_queue(ndev);
2157 return 0;
2158 }
2159
2160 tx_data->buff = skb->data;
2161 tx_data->size = skb->len;
2162 tx_data->skb = skb;
2163
2164 eth_h = (struct ethhdr *)(skb->data);
2165 if (eth_h->h_proto == 0x8e88)
2166 PRINT_D(INIT_DBG, "EAPOL transmitted\n");
2167
2168 /*get source and dest ip addresses*/
2169 ih = (struct iphdr *)(skb->data + sizeof(struct ethhdr));
2170
2171 pu8UdpBuffer = (char *)ih + sizeof(struct iphdr);
2172 if ((pu8UdpBuffer[1] == 68 && pu8UdpBuffer[3] == 67) || (pu8UdpBuffer[1] == 67 && pu8UdpBuffer[3] == 68))
2173 PRINT_D(GENERIC_DBG, "DHCP Message transmitted, type:%x %x %x\n", pu8UdpBuffer[248], pu8UdpBuffer[249], pu8UdpBuffer[250]);
2174
2175 PRINT_D(TX_DBG, "Sending packet - Size = %d - Address = %p - SKB = %p\n", tx_data->size, tx_data->buff, tx_data->skb);
2176
2177 /* Send packet to MAC HW - for now the tx_complete function will be just status
2178 * indicator. still not sure if I need to suspend host transmission till the tx_complete
2179 * function called or not?
2180 * allocated buffer will be freed in tx_complete function.
2181 */
2182 PRINT_D(TX_DBG, "Adding tx packet to TX Queue\n");
2183 nic->netstats.tx_packets++;
2184 nic->netstats.tx_bytes += tx_data->size;
2185 tx_data->pBssid = g_linux_wlan->strInterfaceInfo[nic->u8IfIdx].aBSSID;
2186 #ifndef WILC_FULLY_HOSTING_AP
2187 QueueCount = g_linux_wlan->oup.wlan_add_to_tx_que((void *)tx_data,
2188 tx_data->buff,
2189 tx_data->size,
2190 linux_wlan_tx_complete);
2191 #else
2192 QueueCount = WILC_Xmit_data((void *)tx_data, HOST_TO_WLAN);
2193 #endif /* WILC_FULLY_HOSTING_AP */
2194
2195 if (QueueCount > FLOW_CONTROL_UPPER_THRESHOLD) {
2196 netif_stop_queue(g_linux_wlan->strInterfaceInfo[0].wilc_netdev);
2197 netif_stop_queue(g_linux_wlan->strInterfaceInfo[1].wilc_netdev);
2198 }
2199
2200 return 0;
2201 }
2202
2203 int mac_close(struct net_device *ndev)
2204 {
2205 struct WILC_WFI_priv *priv;
2206 perInterface_wlan_t *nic;
2207 tstrWILC_WFIDrv *pstrWFIDrv;
2208
2209 nic = netdev_priv(ndev);
2210
2211 if ((nic == NULL) || (nic->wilc_netdev == NULL) || (nic->wilc_netdev->ieee80211_ptr == NULL) || (nic->wilc_netdev->ieee80211_ptr->wiphy == NULL)) {
2212 PRINT_ER("nic = NULL\n");
2213 return 0;
2214 }
2215
2216 priv = wiphy_priv(nic->wilc_netdev->ieee80211_ptr->wiphy);
2217
2218 if (priv == NULL) {
2219 PRINT_ER("priv = NULL\n");
2220 return 0;
2221 }
2222
2223 pstrWFIDrv = (tstrWILC_WFIDrv *)priv->hWILCWFIDrv;
2224
2225 PRINT_D(GENERIC_DBG, "Mac close\n");
2226
2227 if (g_linux_wlan == NULL) {
2228 PRINT_ER("g_linux_wlan = NULL\n");
2229 return 0;
2230 }
2231
2232 if (pstrWFIDrv == NULL) {
2233 PRINT_ER("pstrWFIDrv = NULL\n");
2234 return 0;
2235 }
2236
2237 if ((g_linux_wlan->open_ifcs) > 0) {
2238 g_linux_wlan->open_ifcs--;
2239 } else {
2240 PRINT_ER("ERROR: MAC close called while number of opened interfaces is zero\n");
2241 return 0;
2242 }
2243
2244 if (nic->wilc_netdev != NULL) {
2245 /* Stop the network interface queue */
2246 netif_stop_queue(nic->wilc_netdev);
2247
2248 #ifdef USE_WIRELESS
2249 WILC_WFI_DeInitHostInt(nic->wilc_netdev);
2250 #endif
2251 }
2252
2253 if (g_linux_wlan->open_ifcs == 0) {
2254 PRINT_D(GENERIC_DBG, "Deinitializing wilc1000\n");
2255 g_linux_wlan->close = 1;
2256 wilc1000_wlan_deinit(g_linux_wlan);
2257 #ifdef USE_WIRELESS
2258 #ifdef WILC_AP_EXTERNAL_MLME
2259 WILC_WFI_deinit_mon_interface();
2260 #endif
2261 #endif
2262 }
2263
2264 linux_wlan_unlock(&close_exit_sync);
2265 nic->mac_opened = 0;
2266
2267 return 0;
2268 }
2269
2270 int mac_ioctl(struct net_device *ndev, struct ifreq *req, int cmd)
2271 {
2272
2273 u8 *buff = NULL;
2274 s8 rssi;
2275 u32 size = 0, length = 0;
2276 perInterface_wlan_t *nic;
2277 struct WILC_WFI_priv *priv;
2278 s32 s32Error = WILC_SUCCESS;
2279
2280 /* struct iwreq *wrq = (struct iwreq *) req; // tony moved to case SIOCSIWPRIV */
2281 #ifdef USE_WIRELESS
2282 nic = netdev_priv(ndev);
2283
2284 if (!g_linux_wlan->wilc1000_initialized)
2285 return 0;
2286
2287 #endif
2288
2289 switch (cmd) {
2290
2291 /* ]] 2013-06-24 */
2292 case SIOCSIWPRIV:
2293 {
2294 struct iwreq *wrq = (struct iwreq *) req; /* added by tony */
2295
2296 size = wrq->u.data.length;
2297
2298 if (size && wrq->u.data.pointer) {
2299
2300 buff = memdup_user(wrq->u.data.pointer, wrq->u.data.length);
2301 if (IS_ERR(buff)) {
2302 s32Error = PTR_ERR(buff);
2303 goto done;
2304 }
2305
2306 if (strncasecmp(buff, "RSSI", length) == 0) {
2307
2308 #ifdef USE_WIRELESS
2309 priv = wiphy_priv(nic->wilc_netdev->ieee80211_ptr->wiphy);
2310 s32Error = host_int_get_rssi(priv->hWILCWFIDrv, &(rssi));
2311 if (s32Error)
2312 PRINT_ER("Failed to send get rssi param's message queue ");
2313 #endif
2314 PRINT_INFO(GENERIC_DBG, "RSSI :%d\n", rssi);
2315
2316 /*Rounding up the rssi negative value*/
2317 rssi += 5;
2318
2319 snprintf(buff, size, "rssi %d", rssi);
2320
2321 if (copy_to_user(wrq->u.data.pointer, buff, size)) {
2322 PRINT_ER("%s: failed to copy data to user buffer\n", __func__);
2323 s32Error = -EFAULT;
2324 goto done;
2325 }
2326 }
2327 }
2328 }
2329 break;
2330
2331 default:
2332 {
2333 PRINT_INFO(GENERIC_DBG, "Command - %d - has been received\n", cmd);
2334 s32Error = -EOPNOTSUPP;
2335 goto done;
2336 }
2337 }
2338
2339 done:
2340
2341 kfree(buff);
2342
2343 return s32Error;
2344 }
2345
2346 void frmw_to_linux(uint8_t *buff, uint32_t size, uint32_t pkt_offset)
2347 {
2348
2349 unsigned int frame_len = 0;
2350 int stats;
2351 unsigned char *buff_to_send = NULL;
2352 struct sk_buff *skb;
2353 #ifndef TCP_ENHANCEMENTS
2354 char *pu8UdpBuffer;
2355 struct iphdr *ih;
2356 #endif
2357 struct net_device *wilc_netdev;
2358 perInterface_wlan_t *nic;
2359
2360 wilc_netdev = GetIfHandler(buff);
2361 if (wilc_netdev == NULL)
2362 return;
2363
2364 buff += pkt_offset;
2365 nic = netdev_priv(wilc_netdev);
2366
2367 if (size > 0) {
2368
2369 frame_len = size;
2370 buff_to_send = buff;
2371
2372 /* Need to send the packet up to the host, allocate a skb buffer */
2373 skb = dev_alloc_skb(frame_len);
2374 if (skb == NULL) {
2375 PRINT_ER("Low memory - packet droped\n");
2376 return;
2377 }
2378
2379 skb_reserve(skb, (unsigned int)skb->data & 0x3);
2380
2381 if (g_linux_wlan == NULL || wilc_netdev == NULL)
2382 PRINT_ER("wilc_netdev in g_linux_wlan is NULL");
2383 skb->dev = wilc_netdev;
2384
2385 if (skb->dev == NULL)
2386 PRINT_ER("skb->dev is NULL\n");
2387
2388 /*
2389 * for(i=0;i<40;i++)
2390 * {
2391 * if(i<frame_len)
2392 * WILC_PRINTF("buff_to_send[%d]=%2x\n",i,buff_to_send[i]);
2393 *
2394 * }*/
2395
2396 /* skb_put(skb, frame_len); */
2397 memcpy(skb_put(skb, frame_len), buff_to_send, frame_len);
2398
2399 /* WILC_PRINTF("After MEM_CPY\n"); */
2400
2401 /* nic = netdev_priv(wilc_netdev); */
2402
2403 #ifdef USE_WIRELESS
2404 /* if(nic->monitor_flag)
2405 * {
2406 * WILC_WFI_monitor_rx(nic->wilc_netdev,skb);
2407 * return;
2408 * }*/
2409 #endif
2410 skb->protocol = eth_type_trans(skb, wilc_netdev);
2411 #ifndef TCP_ENHANCEMENTS
2412 /*get source and dest ip addresses*/
2413 ih = (struct iphdr *)(skb->data + sizeof(struct ethhdr));
2414
2415 pu8UdpBuffer = (char *)ih + sizeof(struct iphdr);
2416 if (buff_to_send[35] == 67 && buff_to_send[37] == 68)
2417 PRINT_D(RX_DBG, "DHCP Message received\n");
2418 if (buff_to_send[12] == 0x88 && buff_to_send[13] == 0x8e)
2419 PRINT_D(GENERIC_DBG, "eapol received\n");
2420 #endif
2421 /* Send the packet to the stack by giving it to the bridge */
2422 nic->netstats.rx_packets++;
2423 nic->netstats.rx_bytes += frame_len;
2424 skb->ip_summed = CHECKSUM_UNNECESSARY;
2425 stats = netif_rx(skb);
2426 PRINT_D(RX_DBG, "netif_rx ret value is: %d\n", stats);
2427 }
2428 #ifndef TCP_ENHANCEMENTS
2429 else
2430 PRINT_ER("Discard sending packet with len = %d\n", size);
2431 #endif
2432 }
2433
2434 void WILC_WFI_mgmt_rx(uint8_t *buff, uint32_t size)
2435 {
2436 int i = 0;
2437 perInterface_wlan_t *nic;
2438
2439 /*BugID_5450*/
2440 /*Pass the frame on the monitor interface, if any.*/
2441 /*Otherwise, pass it on p2p0 netdev, if registered on it*/
2442 for (i = 0; i < g_linux_wlan->u8NoIfcs; i++) {
2443 nic = netdev_priv(g_linux_wlan->strInterfaceInfo[i].wilc_netdev);
2444 if (nic->monitor_flag) {
2445 WILC_WFI_monitor_rx(buff, size);
2446 return;
2447 }
2448 }
2449
2450 #ifdef WILC_P2P
2451 nic = netdev_priv(g_linux_wlan->strInterfaceInfo[1].wilc_netdev); /* p2p0 */
2452 if ((buff[0] == nic->g_struct_frame_reg[0].frame_type && nic->g_struct_frame_reg[0].reg) ||
2453 (buff[0] == nic->g_struct_frame_reg[1].frame_type && nic->g_struct_frame_reg[1].reg))
2454 WILC_WFI_p2p_rx(g_linux_wlan->strInterfaceInfo[1].wilc_netdev, buff, size);
2455 #endif
2456 }
2457
2458 int wilc_netdev_init(void)
2459 {
2460
2461 int i;
2462 perInterface_wlan_t *nic;
2463 struct net_device *ndev;
2464
2465 linux_wlan_init_lock("close_exit_sync", &close_exit_sync, 0);
2466
2467 /*create the common structure*/
2468 g_linux_wlan = (linux_wlan_t *)WILC_MALLOC(sizeof(linux_wlan_t));
2469 memset(g_linux_wlan, 0, sizeof(linux_wlan_t));
2470
2471 /*Reset interrupt count debug*/
2472 int_rcvdU = 0;
2473 int_rcvdB = 0;
2474 int_clrd = 0;
2475 #ifdef DISABLE_PWRSAVE_AND_SCAN_DURING_IP
2476 register_inetaddr_notifier(&g_dev_notifier);
2477 #endif
2478
2479 for (i = 0; i < NUM_CONCURRENT_IFC; i++) {
2480 /*allocate first ethernet device with perinterface_wlan_t as its private data*/
2481 ndev = alloc_etherdev(sizeof(perInterface_wlan_t));
2482 if (!ndev) {
2483 PRINT_ER("Failed to allocate ethernet dev\n");
2484 return -1;
2485 }
2486
2487 nic = netdev_priv(ndev);
2488 memset(nic, 0, sizeof(perInterface_wlan_t));
2489
2490 /*Name the Devices*/
2491 if (i == 0) {
2492 #if defined(NM73131) /* tony, 2012-09-20 */
2493 strcpy(ndev->name, "wilc_eth%d");
2494 #elif defined(PLAT_CLM9722) /* rachel */
2495 strcpy(ndev->name, "eth%d");
2496 #else /* PANDA_BOARD, PLAT_ALLWINNER_A10, PLAT_ALLWINNER_A20, PLAT_ALLWINNER_A31, PLAT_AML8726_M3 or PLAT_WMS8304 */
2497 strcpy(ndev->name, "wlan%d");
2498 #endif
2499 } else
2500 strcpy(ndev->name, "p2p%d");
2501
2502 nic->u8IfIdx = g_linux_wlan->u8NoIfcs;
2503 nic->wilc_netdev = ndev;
2504 g_linux_wlan->strInterfaceInfo[g_linux_wlan->u8NoIfcs].wilc_netdev = ndev;
2505 g_linux_wlan->u8NoIfcs++;
2506 ndev->netdev_ops = &wilc_netdev_ops;
2507
2508 #ifdef USE_WIRELESS
2509 {
2510 struct wireless_dev *wdev;
2511 /*Register WiFi*/
2512 wdev = WILC_WFI_WiphyRegister(ndev);
2513
2514 #ifdef WILC_SDIO
2515 /* set netdev, tony */
2516 SET_NETDEV_DEV(ndev, &local_sdio_func->dev);
2517 #endif
2518
2519 if (wdev == NULL) {
2520 PRINT_ER("Can't register WILC Wiphy\n");
2521 return -1;
2522 }
2523
2524 /*linking the wireless_dev structure with the netdevice*/
2525 nic->wilc_netdev->ieee80211_ptr = wdev;
2526 nic->wilc_netdev->ml_priv = nic;
2527 wdev->netdev = nic->wilc_netdev;
2528 nic->netstats.rx_packets = 0;
2529 nic->netstats.tx_packets = 0;
2530 nic->netstats.rx_bytes = 0;
2531 nic->netstats.tx_bytes = 0;
2532
2533 }
2534 #endif
2535
2536 if (register_netdev(ndev)) {
2537 PRINT_ER("Device couldn't be registered - %s\n", ndev->name);
2538 return -1; /* ERROR */
2539 }
2540
2541 nic->iftype = STATION_MODE;
2542 nic->mac_opened = 0;
2543
2544 }
2545
2546 #ifndef WILC_SDIO
2547 if (!linux_spi_init(&g_linux_wlan->wilc_spidev)) {
2548 PRINT_ER("Can't initialize SPI\n");
2549 return -1; /* ERROR */
2550 }
2551 g_linux_wlan->wilc_spidev = wilc_spi_dev;
2552 #else
2553 g_linux_wlan->wilc_sdio_func = local_sdio_func;
2554 #endif
2555
2556 return 0;
2557 }
2558
2559 /*The 1st function called after module inserted*/
2560 static int __init init_wilc_driver(void)
2561 {
2562 #if defined(WILC_DEBUGFS)
2563 if (wilc_debugfs_init() < 0) {
2564 PRINT_D(GENERIC_DBG, "fail to create debugfs for wilc driver\n");
2565 return -1;
2566 }
2567 #endif
2568
2569 printk("IN INIT FUNCTION\n");
2570 printk("*** WILC1000 driver VERSION=[10.2] FW_VER=[10.2] ***\n");
2571
2572 linux_wlan_device_power(1);
2573 msleep(100);
2574 linux_wlan_device_detection(1);
2575
2576 #ifdef WILC_SDIO
2577 {
2578 int ret;
2579
2580 ret = sdio_register_driver(&wilc_bus);
2581 if (ret < 0)
2582 PRINT_D(INIT_DBG, "init_wilc_driver: Failed register sdio driver\n");
2583
2584 return ret;
2585 }
2586 #else
2587 PRINT_D(INIT_DBG, "Initializing netdev\n");
2588 if (wilc_netdev_init())
2589 PRINT_ER("Couldn't initialize netdev\n");
2590 return 0;
2591 #endif
2592 }
2593 late_initcall(init_wilc_driver);
2594
2595 static void __exit exit_wilc_driver(void)
2596 {
2597 int i = 0;
2598 perInterface_wlan_t *nic[NUM_CONCURRENT_IFC] = {NULL,};
2599 #define CLOSE_TIMEOUT (12 * 1000)
2600
2601 if ((g_linux_wlan != NULL) && (((g_linux_wlan->strInterfaceInfo[0].wilc_netdev) != NULL)
2602 || ((g_linux_wlan->strInterfaceInfo[1].wilc_netdev) != NULL))) {
2603 #ifdef DISABLE_PWRSAVE_AND_SCAN_DURING_IP
2604 unregister_inetaddr_notifier(&g_dev_notifier);
2605 #endif
2606
2607 for (i = 0; i < NUM_CONCURRENT_IFC; i++)
2608 nic[i] = netdev_priv(g_linux_wlan->strInterfaceInfo[i].wilc_netdev);
2609 }
2610
2611 if ((g_linux_wlan != NULL) && g_linux_wlan->wilc_firmware != NULL) {
2612 release_firmware(g_linux_wlan->wilc_firmware);
2613 g_linux_wlan->wilc_firmware = NULL;
2614 }
2615
2616 if ((g_linux_wlan != NULL) && (((g_linux_wlan->strInterfaceInfo[0].wilc_netdev) != NULL)
2617 || ((g_linux_wlan->strInterfaceInfo[1].wilc_netdev) != NULL))) {
2618 PRINT_D(INIT_DBG, "Waiting for mac_close ....\n");
2619
2620 if (linux_wlan_lock_timeout(&close_exit_sync, CLOSE_TIMEOUT) < 0)
2621 PRINT_D(INIT_DBG, "Closed TimedOUT\n");
2622 else
2623 PRINT_D(INIT_DBG, "mac_closed\n");
2624
2625 for (i = 0; i < NUM_CONCURRENT_IFC; i++) {
2626 /* close all opened interfaces */
2627 if (g_linux_wlan->strInterfaceInfo[i].wilc_netdev != NULL) {
2628 if (nic[i]->mac_opened)
2629 mac_close(g_linux_wlan->strInterfaceInfo[i].wilc_netdev);
2630 }
2631 }
2632 for (i = 0; i < NUM_CONCURRENT_IFC; i++) {
2633 PRINT_D(INIT_DBG, "Unregistering netdev %p\n", g_linux_wlan->strInterfaceInfo[i].wilc_netdev);
2634 unregister_netdev(g_linux_wlan->strInterfaceInfo[i].wilc_netdev);
2635 #ifdef USE_WIRELESS
2636 PRINT_D(INIT_DBG, "Freeing Wiphy...\n");
2637 WILC_WFI_WiphyFree(g_linux_wlan->strInterfaceInfo[i].wilc_netdev);
2638 #endif
2639 PRINT_D(INIT_DBG, "Freeing netdev...\n");
2640 free_netdev(g_linux_wlan->strInterfaceInfo[i].wilc_netdev);
2641 }
2642 }
2643
2644 #ifdef USE_WIRELESS
2645 #ifdef WILC_AP_EXTERNAL_MLME
2646 /* Bug 4600 : WILC_WFI_deinit_mon_interface was already called at mac_close */
2647 /* WILC_WFI_deinit_mon_interface(); */
2648 #endif
2649 #endif
2650
2651 /* if(g_linux_wlan->open_ifcs==0) */
2652 {
2653 #ifndef WILC_SDIO
2654 PRINT_D(INIT_DBG, "SPI unregsiter...\n");
2655 spi_unregister_driver(&wilc_bus);
2656 #else
2657 PRINT_D(INIT_DBG, "SDIO unregsiter...\n");
2658 sdio_unregister_driver(&wilc_bus);
2659 #endif
2660
2661 linux_wlan_deinit_lock(&close_exit_sync);
2662 if (g_linux_wlan != NULL) {
2663 kfree(g_linux_wlan);
2664 g_linux_wlan = NULL;
2665 }
2666 printk("Module_exit Done.\n");
2667
2668 #if defined(WILC_DEBUGFS)
2669 wilc_debugfs_remove();
2670 #endif
2671
2672 linux_wlan_device_detection(0);
2673 linux_wlan_device_power(0);
2674 }
2675 }
2676 module_exit(exit_wilc_driver);
2677
2678 MODULE_LICENSE("GPL");
Linux kernel - Deliverables
This page took 0.093062 seconds and 5 git commands to generate.