drivers/tty/serial/8250/8250_of.c

   1 /*
   2  *  Serial Port driver for Open Firmware platform devices
   3  *
   4  *    Copyright (C) 2006 Arnd Bergmann <arnd@arndb.de>, IBM Corp.
   5  *
   6  *  This program is free software; you can redistribute it and/or
   7  *  modify it under the terms of the GNU General Public License
   8  *  as published by the Free Software Foundation; either version
   9  *  2 of the License, or (at your option) any later version.
  10  *
  11  */
  12 #include <linux/console.h>
  13 #include <linux/module.h>
  14 #include <linux/slab.h>
  15 #include <linux/delay.h>
  16 #include <linux/serial_core.h>
  17 #include <linux/serial_reg.h>
  18 #include <linux/of_address.h>
  19 #include <linux/of_irq.h>
  20 #include <linux/of_platform.h>
  21 #include <linux/clk.h>
  22
  23 #include "8250.h"
  24
  25 struct of_serial_info {
  26         struct clk *clk;
  27         int type;
  28         int line;
  29 };
  30
  31 #ifdef CONFIG_ARCH_TEGRA
  32 void tegra_serial_handle_break(struct uart_port *p)
  33 {
  34         unsigned int status, tmout = 10000;
  35
  36         do {
  37                 status = p->serial_in(p, UART_LSR);
  38                 if (status & (UART_LSR_FIFOE | UART_LSR_BRK_ERROR_BITS))
  39                         status = p->serial_in(p, UART_RX);
  40                 else
  41                         break;
  42                 if (--tmout == 0)
  43                         break;
  44                 udelay(1);
  45         } while (1);
  46 }
  47 #else
  48 static inline void tegra_serial_handle_break(struct uart_port *port)
  49 {
  50 }
  51 #endif
  52
  53 /*
  54  * Fill a struct uart_port for a given device node
  55  */
  56 static int of_platform_serial_setup(struct platform_device *ofdev,
  57                         int type, struct uart_port *port,
  58                         struct of_serial_info *info)
  59 {
  60         struct resource resource;
  61         struct device_node *np = ofdev->dev.of_node;
  62         u32 clk, spd, prop;
  63         int ret;
  64
  65         memset(port, 0, sizeof *port);
  66         if (of_property_read_u32(np, "clock-frequency", &clk)) {
  67
  68                 /* Get clk rate through clk driver if present */
  69                 info->clk = devm_clk_get(&ofdev->dev, NULL);
  70                 if (IS_ERR(info->clk)) {
  71                         dev_warn(&ofdev->dev,
  72                                 "clk or clock-frequency not defined\n");
  73                         return PTR_ERR(info->clk);
  74                 }
  75
  76                 ret = clk_prepare_enable(info->clk);
  77                 if (ret < 0)
  78                         return ret;
  79
  80                 clk = clk_get_rate(info->clk);
  81         }
  82         /* If current-speed was set, then try not to change it. */
  83         if (of_property_read_u32(np, "current-speed", &spd) == 0)
  84                 port->custom_divisor = clk / (16 * spd);
  85
  86         ret = of_address_to_resource(np, 0, &resource);
  87         if (ret) {
  88                 dev_warn(&ofdev->dev, "invalid address\n");
  89                 goto out;
  90         }
  91
  92         spin_lock_init(&port->lock);
  93         port->mapbase = resource.start;
  94         port->mapsize = resource_size(&resource);
  95
  96         /* Check for shifted address mapping */
  97         if (of_property_read_u32(np, "reg-offset", &prop) == 0)
  98                 port->mapbase += prop;
  99
 100         /* Check for registers offset within the devices address range */
 101         if (of_property_read_u32(np, "reg-shift", &prop) == 0)
 102                 port->regshift = prop;
 103
 104         /* Check for fifo size */
 105         if (of_property_read_u32(np, "fifo-size", &prop) == 0)
 106                 port->fifosize = prop;
 107
 108         /* Check for a fixed line number */
 109         ret = of_alias_get_id(np, "serial");
 110         if (ret >= 0)
 111                 port->line = ret;
 112
 113         port->irq = irq_of_parse_and_map(np, 0);
 114         port->iotype = UPIO_MEM;
 115         if (of_property_read_u32(np, "reg-io-width", &prop) == 0) {
 116                 switch (prop) {
 117                 case 1:
 118                         port->iotype = UPIO_MEM;
 119                         break;
 120                 case 2:
 121                         port->iotype = UPIO_MEM16;
 122                         break;
 123                 case 4:
 124                         port->iotype = of_device_is_big_endian(np) ?
 125                                        UPIO_MEM32BE : UPIO_MEM32;
 126                         break;
 127                 default:
 128                         dev_warn(&ofdev->dev, "unsupported reg-io-width (%d)\n",
 129                                  prop);
 130                         ret = -EINVAL;
 131                         goto out;
 132                 }
 133         }
 134
 135         port->type = type;
 136         port->uartclk = clk;
 137         port->flags = UPF_SHARE_IRQ | UPF_BOOT_AUTOCONF | UPF_IOREMAP
 138                 | UPF_FIXED_PORT | UPF_FIXED_TYPE;
 139
 140         if (of_find_property(np, "no-loopback-test", NULL))
 141                 port->flags |= UPF_SKIP_TEST;
 142
 143         port->dev = &ofdev->dev;
 144
 145         switch (type) {
 146         case PORT_TEGRA:
 147                 port->handle_break = tegra_serial_handle_break;
 148                 break;
 149
 150         case PORT_RT2880:
 151                 port->iotype = UPIO_AU;
 152                 break;
 153         }
 154
 155         if (IS_ENABLED(CONFIG_SERIAL_8250_FSL) &&
 156             (of_device_is_compatible(np, "fsl,ns16550") ||
 157              of_device_is_compatible(np, "fsl,16550-FIFO64")))
 158                 port->handle_irq = fsl8250_handle_irq;
 159
 160         return 0;
 161 out:
 162         if (info->clk)
 163                 clk_disable_unprepare(info->clk);
 164         return ret;
 165 }
 166
 167 /*
 168  * Try to register a serial port
 169  */
 170 static const struct of_device_id of_platform_serial_table[];
 171 static int of_platform_serial_probe(struct platform_device *ofdev)
 172 {
 173         const struct of_device_id *match;
 174         struct of_serial_info *info;
 175         struct uart_port port;
 176         int port_type;
 177         int ret;
 178
 179         match = of_match_device(of_platform_serial_table, &ofdev->dev);
 180         if (!match)
 181                 return -EINVAL;
 182
 183         if (of_find_property(ofdev->dev.of_node, "used-by-rtas", NULL))
 184                 return -EBUSY;
 185
 186         info = kzalloc(sizeof(*info), GFP_KERNEL);
 187         if (info == NULL)
 188                 return -ENOMEM;
 189
 190         port_type = (unsigned long)match->data;
 191         ret = of_platform_serial_setup(ofdev, port_type, &port, info);
 192         if (ret)
 193                 goto out;
 194
 195         switch (port_type) {
 196         case PORT_8250 ... PORT_MAX_8250:
 197         {
 198                 struct uart_8250_port port8250;
 199                 memset(&port8250, 0, sizeof(port8250));
 200                 port8250.port = port;
 201
 202                 if (port.fifosize)
 203                         port8250.capabilities = UART_CAP_FIFO;
 204
 205                 if (of_property_read_bool(ofdev->dev.of_node,
 206                                           "auto-flow-control"))
 207                         port8250.capabilities |= UART_CAP_AFE;
 208
 209                 ret = serial8250_register_8250_port(&port8250);
 210                 break;
 211         }
 212         default:
 213                 /* need to add code for these */
 214         case PORT_UNKNOWN:
 215                 dev_info(&ofdev->dev, "Unknown serial port found, ignored\n");
 216                 ret = -ENODEV;
 217                 break;
 218         }
 219         if (ret < 0)
 220                 goto out;
 221
 222         info->type = port_type;
 223         info->line = ret;
 224         platform_set_drvdata(ofdev, info);
 225         return 0;
 226 out:
 227         kfree(info);
 228         irq_dispose_mapping(port.irq);
 229         return ret;
 230 }
 231
 232 /*
 233  * Release a line
 234  */
 235 static int of_platform_serial_remove(struct platform_device *ofdev)
 236 {
 237         struct of_serial_info *info = platform_get_drvdata(ofdev);
 238         switch (info->type) {
 239         case PORT_8250 ... PORT_MAX_8250:
 240                 serial8250_unregister_port(info->line);
 241                 break;
 242         default:
 243                 /* need to add code for these */
 244                 break;
 245         }
 246
 247         if (info->clk)
 248                 clk_disable_unprepare(info->clk);
 249         kfree(info);
 250         return 0;
 251 }
 252
 253 #ifdef CONFIG_PM_SLEEP
 254 static void of_serial_suspend_8250(struct of_serial_info *info)
 255 {
 256         struct uart_8250_port *port8250 = serial8250_get_port(info->line);
 257         struct uart_port *port = &port8250->port;
 258
 259         serial8250_suspend_port(info->line);
 260         if (info->clk && (!uart_console(port) || console_suspend_enabled))
 261                 clk_disable_unprepare(info->clk);
 262 }
 263
 264 static void of_serial_resume_8250(struct of_serial_info *info)
 265 {
 266         struct uart_8250_port *port8250 = serial8250_get_port(info->line);
 267         struct uart_port *port = &port8250->port;
 268
 269         if (info->clk && (!uart_console(port) || console_suspend_enabled))
 270                 clk_prepare_enable(info->clk);
 271
 272         serial8250_resume_port(info->line);
 273 }
 274
 275 static int of_serial_suspend(struct device *dev)
 276 {
 277         struct of_serial_info *info = dev_get_drvdata(dev);
 278
 279         switch (info->type) {
 280         case PORT_8250 ... PORT_MAX_8250:
 281                 of_serial_suspend_8250(info);
 282                 break;
 283         default:
 284                 break;
 285         }
 286
 287         return 0;
 288 }
 289
 290 static int of_serial_resume(struct device *dev)
 291 {
 292         struct of_serial_info *info = dev_get_drvdata(dev);
 293
 294         switch (info->type) {
 295         case PORT_8250 ... PORT_MAX_8250:
 296                 of_serial_resume_8250(info);
 297                 break;
 298         default:
 299                 break;
 300         }
 301
 302         return 0;
 303 }
 304 #endif
 305 static SIMPLE_DEV_PM_OPS(of_serial_pm_ops, of_serial_suspend, of_serial_resume);
 306
 307 /*
 308  * A few common types, add more as needed.
 309  */
 310 static const struct of_device_id of_platform_serial_table[] = {
 311         { .compatible = "ns8250",   .data = (void *)PORT_8250, },
 312         { .compatible = "ns16450",  .data = (void *)PORT_16450, },
 313         { .compatible = "ns16550a", .data = (void *)PORT_16550A, },
 314         { .compatible = "ns16550",  .data = (void *)PORT_16550, },
 315         { .compatible = "ns16750",  .data = (void *)PORT_16750, },
 316         { .compatible = "ns16850",  .data = (void *)PORT_16850, },
 317         { .compatible = "nvidia,tegra20-uart", .data = (void *)PORT_TEGRA, },
 318         { .compatible = "nxp,lpc3220-uart", .data = (void *)PORT_LPC3220, },
 319         { .compatible = "ralink,rt2880-uart", .data = (void *)PORT_RT2880, },
 320         { .compatible = "altr,16550-FIFO32",
 321                 .data = (void *)PORT_ALTR_16550_F32, },
 322         { .compatible = "altr,16550-FIFO64",
 323                 .data = (void *)PORT_ALTR_16550_F64, },
 324         { .compatible = "altr,16550-FIFO128",
 325                 .data = (void *)PORT_ALTR_16550_F128, },
 326         { .compatible = "mrvl,mmp-uart",
 327                 .data = (void *)PORT_XSCALE, },
 328         { .compatible = "mrvl,pxa-uart",
 329                 .data = (void *)PORT_XSCALE, },
 330         { /* end of list */ },
 331 };
 332 MODULE_DEVICE_TABLE(of, of_platform_serial_table);
 333
 334 static struct platform_driver of_platform_serial_driver = {
 335         .driver = {
 336                 .name = "of_serial",
 337                 .of_match_table = of_platform_serial_table,
 338                 .pm = &of_serial_pm_ops,
 339         },
 340         .probe = of_platform_serial_probe,
 341         .remove = of_platform_serial_remove,
 342 };
 343
 344 module_platform_driver(of_platform_serial_driver);
 345
 346 MODULE_AUTHOR("Arnd Bergmann <arnd@arndb.de>");
 347 MODULE_LICENSE("GPL");
 348 MODULE_DESCRIPTION("Serial Port driver for Open Firmware platform devices");