projects / deliverable / linux.git / blob
? search:
summary | shortlog | log | commit | commitdiff | tree
blame | history | raw | HEAD
IB/hfi1: Fix TID caching actions
[deliverable/linux.git] / drivers / tty / serial / imx.c
1 /*
2 * Driver for Motorola/Freescale IMX serial ports
3 *
4 * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o.
5 *
6 * Author: Sascha Hauer <sascha@saschahauer.de>
7 * Copyright (C) 2004 Pengutronix
8 *
9 * This program is free software; you can redistribute it and/or modify
10 * it under the terms of the GNU General Public License as published by
11 * the Free Software Foundation; either version 2 of the License, or
12 * (at your option) any later version.
13 *
14 * This program is distributed in the hope that it will be useful,
15 * but WITHOUT ANY WARRANTY; without even the implied warranty of
16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17 * GNU General Public License for more details.
18 */
19
20 #if defined(CONFIG_SERIAL_IMX_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
21 #define SUPPORT_SYSRQ
22 #endif
23
24 #include <linux/module.h>
25 #include <linux/ioport.h>
26 #include <linux/init.h>
27 #include <linux/console.h>
28 #include <linux/sysrq.h>
29 #include <linux/platform_device.h>
30 #include <linux/tty.h>
31 #include <linux/tty_flip.h>
32 #include <linux/serial_core.h>
33 #include <linux/serial.h>
34 #include <linux/clk.h>
35 #include <linux/delay.h>
36 #include <linux/rational.h>
37 #include <linux/slab.h>
38 #include <linux/of.h>
39 #include <linux/of_device.h>
40 #include <linux/io.h>
41 #include <linux/dma-mapping.h>
42
43 #include <asm/irq.h>
44 #include <linux/platform_data/serial-imx.h>
45 #include <linux/platform_data/dma-imx.h>
46
47 #include "serial_mctrl_gpio.h"
48
49 /* Register definitions */
50 #define URXD0 0x0 /* Receiver Register */
51 #define URTX0 0x40 /* Transmitter Register */
52 #define UCR1 0x80 /* Control Register 1 */
53 #define UCR2 0x84 /* Control Register 2 */
54 #define UCR3 0x88 /* Control Register 3 */
55 #define UCR4 0x8c /* Control Register 4 */
56 #define UFCR 0x90 /* FIFO Control Register */
57 #define USR1 0x94 /* Status Register 1 */
58 #define USR2 0x98 /* Status Register 2 */
59 #define UESC 0x9c /* Escape Character Register */
60 #define UTIM 0xa0 /* Escape Timer Register */
61 #define UBIR 0xa4 /* BRM Incremental Register */
62 #define UBMR 0xa8 /* BRM Modulator Register */
63 #define UBRC 0xac /* Baud Rate Count Register */
64 #define IMX21_ONEMS 0xb0 /* One Millisecond register */
65 #define IMX1_UTS 0xd0 /* UART Test Register on i.mx1 */
66 #define IMX21_UTS 0xb4 /* UART Test Register on all other i.mx*/
67
68 /* UART Control Register Bit Fields.*/
69 #define URXD_DUMMY_READ (1<<16)
70 #define URXD_CHARRDY (1<<15)
71 #define URXD_ERR (1<<14)
72 #define URXD_OVRRUN (1<<13)
73 #define URXD_FRMERR (1<<12)
74 #define URXD_BRK (1<<11)
75 #define URXD_PRERR (1<<10)
76 #define URXD_RX_DATA (0xFF<<0)
77 #define UCR1_ADEN (1<<15) /* Auto detect interrupt */
78 #define UCR1_ADBR (1<<14) /* Auto detect baud rate */
79 #define UCR1_TRDYEN (1<<13) /* Transmitter ready interrupt enable */
80 #define UCR1_IDEN (1<<12) /* Idle condition interrupt */
81 #define UCR1_ICD_REG(x) (((x) & 3) << 10) /* idle condition detect */
82 #define UCR1_RRDYEN (1<<9) /* Recv ready interrupt enable */
83 #define UCR1_RDMAEN (1<<8) /* Recv ready DMA enable */
84 #define UCR1_IREN (1<<7) /* Infrared interface enable */
85 #define UCR1_TXMPTYEN (1<<6) /* Transimitter empty interrupt enable */
86 #define UCR1_RTSDEN (1<<5) /* RTS delta interrupt enable */
87 #define UCR1_SNDBRK (1<<4) /* Send break */
88 #define UCR1_TDMAEN (1<<3) /* Transmitter ready DMA enable */
89 #define IMX1_UCR1_UARTCLKEN (1<<2) /* UART clock enabled, i.mx1 only */
90 #define UCR1_ATDMAEN (1<<2) /* Aging DMA Timer Enable */
91 #define UCR1_DOZE (1<<1) /* Doze */
92 #define UCR1_UARTEN (1<<0) /* UART enabled */
93 #define UCR2_ESCI (1<<15) /* Escape seq interrupt enable */
94 #define UCR2_IRTS (1<<14) /* Ignore RTS pin */
95 #define UCR2_CTSC (1<<13) /* CTS pin control */
96 #define UCR2_CTS (1<<12) /* Clear to send */
97 #define UCR2_ESCEN (1<<11) /* Escape enable */
98 #define UCR2_PREN (1<<8) /* Parity enable */
99 #define UCR2_PROE (1<<7) /* Parity odd/even */
100 #define UCR2_STPB (1<<6) /* Stop */
101 #define UCR2_WS (1<<5) /* Word size */
102 #define UCR2_RTSEN (1<<4) /* Request to send interrupt enable */
103 #define UCR2_ATEN (1<<3) /* Aging Timer Enable */
104 #define UCR2_TXEN (1<<2) /* Transmitter enabled */
105 #define UCR2_RXEN (1<<1) /* Receiver enabled */
106 #define UCR2_SRST (1<<0) /* SW reset */
107 #define UCR3_DTREN (1<<13) /* DTR interrupt enable */
108 #define UCR3_PARERREN (1<<12) /* Parity enable */
109 #define UCR3_FRAERREN (1<<11) /* Frame error interrupt enable */
110 #define UCR3_DSR (1<<10) /* Data set ready */
111 #define UCR3_DCD (1<<9) /* Data carrier detect */
112 #define UCR3_RI (1<<8) /* Ring indicator */
113 #define UCR3_ADNIMP (1<<7) /* Autobaud Detection Not Improved */
114 #define UCR3_RXDSEN (1<<6) /* Receive status interrupt enable */
115 #define UCR3_AIRINTEN (1<<5) /* Async IR wake interrupt enable */
116 #define UCR3_AWAKEN (1<<4) /* Async wake interrupt enable */
117 #define UCR3_DTRDEN (1<<3) /* Data Terminal Ready Delta Enable. */
118 #define IMX21_UCR3_RXDMUXSEL (1<<2) /* RXD Muxed Input Select */
119 #define UCR3_INVT (1<<1) /* Inverted Infrared transmission */
120 #define UCR3_BPEN (1<<0) /* Preset registers enable */
121 #define UCR4_CTSTL_SHF 10 /* CTS trigger level shift */
122 #define UCR4_CTSTL_MASK 0x3F /* CTS trigger is 6 bits wide */
123 #define UCR4_INVR (1<<9) /* Inverted infrared reception */
124 #define UCR4_ENIRI (1<<8) /* Serial infrared interrupt enable */
125 #define UCR4_WKEN (1<<7) /* Wake interrupt enable */
126 #define UCR4_REF16 (1<<6) /* Ref freq 16 MHz */
127 #define UCR4_IDDMAEN (1<<6) /* DMA IDLE Condition Detected */
128 #define UCR4_IRSC (1<<5) /* IR special case */
129 #define UCR4_TCEN (1<<3) /* Transmit complete interrupt enable */
130 #define UCR4_BKEN (1<<2) /* Break condition interrupt enable */
131 #define UCR4_OREN (1<<1) /* Receiver overrun interrupt enable */
132 #define UCR4_DREN (1<<0) /* Recv data ready interrupt enable */
133 #define UFCR_RXTL_SHF 0 /* Receiver trigger level shift */
134 #define UFCR_DCEDTE (1<<6) /* DCE/DTE mode select */
135 #define UFCR_RFDIV (7<<7) /* Reference freq divider mask */
136 #define UFCR_RFDIV_REG(x) (((x) < 7 ? 6 - (x) : 6) << 7)
137 #define UFCR_TXTL_SHF 10 /* Transmitter trigger level shift */
138 #define USR1_PARITYERR (1<<15) /* Parity error interrupt flag */
139 #define USR1_RTSS (1<<14) /* RTS pin status */
140 #define USR1_TRDY (1<<13) /* Transmitter ready interrupt/dma flag */
141 #define USR1_RTSD (1<<12) /* RTS delta */
142 #define USR1_ESCF (1<<11) /* Escape seq interrupt flag */
143 #define USR1_FRAMERR (1<<10) /* Frame error interrupt flag */
144 #define USR1_RRDY (1<<9) /* Receiver ready interrupt/dma flag */
145 #define USR1_AGTIM (1<<8) /* Ageing timer interrupt flag */
146 #define USR1_DTRD (1<<7) /* DTR Delta */
147 #define USR1_RXDS (1<<6) /* Receiver idle interrupt flag */
148 #define USR1_AIRINT (1<<5) /* Async IR wake interrupt flag */
149 #define USR1_AWAKE (1<<4) /* Aysnc wake interrupt flag */
150 #define USR2_ADET (1<<15) /* Auto baud rate detect complete */
151 #define USR2_TXFE (1<<14) /* Transmit buffer FIFO empty */
152 #define USR2_DTRF (1<<13) /* DTR edge interrupt flag */
153 #define USR2_IDLE (1<<12) /* Idle condition */
154 #define USR2_RIDELT (1<<10) /* Ring Interrupt Delta */
155 #define USR2_RIIN (1<<9) /* Ring Indicator Input */
156 #define USR2_IRINT (1<<8) /* Serial infrared interrupt flag */
157 #define USR2_WAKE (1<<7) /* Wake */
158 #define USR2_DCDIN (1<<5) /* Data Carrier Detect Input */
159 #define USR2_RTSF (1<<4) /* RTS edge interrupt flag */
160 #define USR2_TXDC (1<<3) /* Transmitter complete */
161 #define USR2_BRCD (1<<2) /* Break condition */
162 #define USR2_ORE (1<<1) /* Overrun error */
163 #define USR2_RDR (1<<0) /* Recv data ready */
164 #define UTS_FRCPERR (1<<13) /* Force parity error */
165 #define UTS_LOOP (1<<12) /* Loop tx and rx */
166 #define UTS_TXEMPTY (1<<6) /* TxFIFO empty */
167 #define UTS_RXEMPTY (1<<5) /* RxFIFO empty */
168 #define UTS_TXFULL (1<<4) /* TxFIFO full */
169 #define UTS_RXFULL (1<<3) /* RxFIFO full */
170 #define UTS_SOFTRST (1<<0) /* Software reset */
171
172 /* We've been assigned a range on the "Low-density serial ports" major */
173 #define SERIAL_IMX_MAJOR 207
174 #define MINOR_START 16
175 #define DEV_NAME "ttymxc"
176
177 /*
178 * This determines how often we check the modem status signals
179 * for any change. They generally aren't connected to an IRQ
180 * so we have to poll them. We also check immediately before
181 * filling the TX fifo incase CTS has been dropped.
182 */
183 #define MCTRL_TIMEOUT (250*HZ/1000)
184
185 #define DRIVER_NAME "IMX-uart"
186
187 #define UART_NR 8
188
189 /* i.MX21 type uart runs on all i.mx except i.MX1 and i.MX6q */
190 enum imx_uart_type {
191 IMX1_UART,
192 IMX21_UART,
193 IMX6Q_UART,
194 };
195
196 /* device type dependent stuff */
197 struct imx_uart_data {
198 unsigned uts_reg;
199 enum imx_uart_type devtype;
200 };
201
202 struct imx_port {
203 struct uart_port port;
204 struct timer_list timer;
205 unsigned int old_status;
206 unsigned int have_rtscts:1;
207 unsigned int dte_mode:1;
208 unsigned int irda_inv_rx:1;
209 unsigned int irda_inv_tx:1;
210 unsigned short trcv_delay; /* transceiver delay */
211 struct clk *clk_ipg;
212 struct clk *clk_per;
213 const struct imx_uart_data *devdata;
214
215 struct mctrl_gpios *gpios;
216
217 /* DMA fields */
218 unsigned int dma_is_inited:1;
219 unsigned int dma_is_enabled:1;
220 unsigned int dma_is_rxing:1;
221 unsigned int dma_is_txing:1;
222 struct dma_chan *dma_chan_rx, *dma_chan_tx;
223 struct scatterlist rx_sgl, tx_sgl[2];
224 void *rx_buf;
225 unsigned int tx_bytes;
226 unsigned int dma_tx_nents;
227 wait_queue_head_t dma_wait;
228 unsigned int saved_reg[10];
229 bool context_saved;
230 };
231
232 struct imx_port_ucrs {
233 unsigned int ucr1;
234 unsigned int ucr2;
235 unsigned int ucr3;
236 };
237
238 static struct imx_uart_data imx_uart_devdata[] = {
239 [IMX1_UART] = {
240 .uts_reg = IMX1_UTS,
241 .devtype = IMX1_UART,
242 },
243 [IMX21_UART] = {
244 .uts_reg = IMX21_UTS,
245 .devtype = IMX21_UART,
246 },
247 [IMX6Q_UART] = {
248 .uts_reg = IMX21_UTS,
249 .devtype = IMX6Q_UART,
250 },
251 };
252
253 static const struct platform_device_id imx_uart_devtype[] = {
254 {
255 .name = "imx1-uart",
256 .driver_data = (kernel_ulong_t) &imx_uart_devdata[IMX1_UART],
257 }, {
258 .name = "imx21-uart",
259 .driver_data = (kernel_ulong_t) &imx_uart_devdata[IMX21_UART],
260 }, {
261 .name = "imx6q-uart",
262 .driver_data = (kernel_ulong_t) &imx_uart_devdata[IMX6Q_UART],
263 }, {
264 /* sentinel */
265 }
266 };
267 MODULE_DEVICE_TABLE(platform, imx_uart_devtype);
268
269 static const struct of_device_id imx_uart_dt_ids[] = {
270 { .compatible = "fsl,imx6q-uart", .data = &imx_uart_devdata[IMX6Q_UART], },
271 { .compatible = "fsl,imx1-uart", .data = &imx_uart_devdata[IMX1_UART], },
272 { .compatible = "fsl,imx21-uart", .data = &imx_uart_devdata[IMX21_UART], },
273 { /* sentinel */ }
274 };
275 MODULE_DEVICE_TABLE(of, imx_uart_dt_ids);
276
277 static inline unsigned uts_reg(struct imx_port *sport)
278 {
279 return sport->devdata->uts_reg;
280 }
281
282 static inline int is_imx1_uart(struct imx_port *sport)
283 {
284 return sport->devdata->devtype == IMX1_UART;
285 }
286
287 static inline int is_imx21_uart(struct imx_port *sport)
288 {
289 return sport->devdata->devtype == IMX21_UART;
290 }
291
292 static inline int is_imx6q_uart(struct imx_port *sport)
293 {
294 return sport->devdata->devtype == IMX6Q_UART;
295 }
296 /*
297 * Save and restore functions for UCR1, UCR2 and UCR3 registers
298 */
299 #if defined(CONFIG_SERIAL_IMX_CONSOLE)
300 static void imx_port_ucrs_save(struct uart_port *port,
301 struct imx_port_ucrs *ucr)
302 {
303 /* save control registers */
304 ucr->ucr1 = readl(port->membase + UCR1);
305 ucr->ucr2 = readl(port->membase + UCR2);
306 ucr->ucr3 = readl(port->membase + UCR3);
307 }
308
309 static void imx_port_ucrs_restore(struct uart_port *port,
310 struct imx_port_ucrs *ucr)
311 {
312 /* restore control registers */
313 writel(ucr->ucr1, port->membase + UCR1);
314 writel(ucr->ucr2, port->membase + UCR2);
315 writel(ucr->ucr3, port->membase + UCR3);
316 }
317 #endif
318
319 static void imx_port_rts_active(struct imx_port *sport, unsigned long *ucr2)
320 {
321 *ucr2 &= ~UCR2_CTSC;
322 *ucr2 |= UCR2_CTS;
323
324 mctrl_gpio_set(sport->gpios, sport->port.mctrl | TIOCM_RTS);
325 }
326
327 static void imx_port_rts_inactive(struct imx_port *sport, unsigned long *ucr2)
328 {
329 *ucr2 &= ~(UCR2_CTSC | UCR2_CTS);
330
331 mctrl_gpio_set(sport->gpios, sport->port.mctrl & ~TIOCM_RTS);
332 }
333
334 static void imx_port_rts_auto(struct imx_port *sport, unsigned long *ucr2)
335 {
336 *ucr2 |= UCR2_CTSC;
337 }
338
339 /*
340 * interrupts disabled on entry
341 */
342 static void imx_stop_tx(struct uart_port *port)
343 {
344 struct imx_port *sport = (struct imx_port *)port;
345 unsigned long temp;
346
347 /*
348 * We are maybe in the SMP context, so if the DMA TX thread is running
349 * on other cpu, we have to wait for it to finish.
350 */
351 if (sport->dma_is_enabled && sport->dma_is_txing)
352 return;
353
354 temp = readl(port->membase + UCR1);
355 writel(temp & ~UCR1_TXMPTYEN, port->membase + UCR1);
356
357 /* in rs485 mode disable transmitter if shifter is empty */
358 if (port->rs485.flags & SER_RS485_ENABLED &&
359 readl(port->membase + USR2) & USR2_TXDC) {
360 temp = readl(port->membase + UCR2);
361 if (port->rs485.flags & SER_RS485_RTS_AFTER_SEND)
362 imx_port_rts_inactive(sport, &temp);
363 else
364 imx_port_rts_active(sport, &temp);
365 temp |= UCR2_RXEN;
366 writel(temp, port->membase + UCR2);
367
368 temp = readl(port->membase + UCR4);
369 temp &= ~UCR4_TCEN;
370 writel(temp, port->membase + UCR4);
371 }
372 }
373
374 /*
375 * interrupts disabled on entry
376 */
377 static void imx_stop_rx(struct uart_port *port)
378 {
379 struct imx_port *sport = (struct imx_port *)port;
380 unsigned long temp;
381
382 if (sport->dma_is_enabled && sport->dma_is_rxing) {
383 if (sport->port.suspended) {
384 dmaengine_terminate_all(sport->dma_chan_rx);
385 sport->dma_is_rxing = 0;
386 } else {
387 return;
388 }
389 }
390
391 temp = readl(sport->port.membase + UCR2);
392 writel(temp & ~UCR2_RXEN, sport->port.membase + UCR2);
393
394 /* disable the `Receiver Ready Interrrupt` */
395 temp = readl(sport->port.membase + UCR1);
396 writel(temp & ~UCR1_RRDYEN, sport->port.membase + UCR1);
397 }
398
399 /*
400 * Set the modem control timer to fire immediately.
401 */
402 static void imx_enable_ms(struct uart_port *port)
403 {
404 struct imx_port *sport = (struct imx_port *)port;
405
406 mod_timer(&sport->timer, jiffies);
407
408 mctrl_gpio_enable_ms(sport->gpios);
409 }
410
411 static void imx_dma_tx(struct imx_port *sport);
412 static inline void imx_transmit_buffer(struct imx_port *sport)
413 {
414 struct circ_buf *xmit = &sport->port.state->xmit;
415 unsigned long temp;
416
417 if (sport->port.x_char) {
418 /* Send next char */
419 writel(sport->port.x_char, sport->port.membase + URTX0);
420 sport->port.icount.tx++;
421 sport->port.x_char = 0;
422 return;
423 }
424
425 if (uart_circ_empty(xmit) || uart_tx_stopped(&sport->port)) {
426 imx_stop_tx(&sport->port);
427 return;
428 }
429
430 if (sport->dma_is_enabled) {
431 /*
432 * We've just sent a X-char Ensure the TX DMA is enabled
433 * and the TX IRQ is disabled.
434 **/
435 temp = readl(sport->port.membase + UCR1);
436 temp &= ~UCR1_TXMPTYEN;
437 if (sport->dma_is_txing) {
438 temp |= UCR1_TDMAEN;
439 writel(temp, sport->port.membase + UCR1);
440 } else {
441 writel(temp, sport->port.membase + UCR1);
442 imx_dma_tx(sport);
443 }
444 }
445
446 while (!uart_circ_empty(xmit) &&
447 !(readl(sport->port.membase + uts_reg(sport)) & UTS_TXFULL)) {
448 /* send xmit->buf[xmit->tail]
449 * out the port here */
450 writel(xmit->buf[xmit->tail], sport->port.membase + URTX0);
451 xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
452 sport->port.icount.tx++;
453 }
454
455 if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
456 uart_write_wakeup(&sport->port);
457
458 if (uart_circ_empty(xmit))
459 imx_stop_tx(&sport->port);
460 }
461
462 static void dma_tx_callback(void *data)
463 {
464 struct imx_port *sport = data;
465 struct scatterlist *sgl = &sport->tx_sgl[0];
466 struct circ_buf *xmit = &sport->port.state->xmit;
467 unsigned long flags;
468 unsigned long temp;
469
470 spin_lock_irqsave(&sport->port.lock, flags);
471
472 dma_unmap_sg(sport->port.dev, sgl, sport->dma_tx_nents, DMA_TO_DEVICE);
473
474 temp = readl(sport->port.membase + UCR1);
475 temp &= ~UCR1_TDMAEN;
476 writel(temp, sport->port.membase + UCR1);
477
478 /* update the stat */
479 xmit->tail = (xmit->tail + sport->tx_bytes) & (UART_XMIT_SIZE - 1);
480 sport->port.icount.tx += sport->tx_bytes;
481
482 dev_dbg(sport->port.dev, "we finish the TX DMA.\n");
483
484 sport->dma_is_txing = 0;
485
486 spin_unlock_irqrestore(&sport->port.lock, flags);
487
488 if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
489 uart_write_wakeup(&sport->port);
490
491 if (waitqueue_active(&sport->dma_wait)) {
492 wake_up(&sport->dma_wait);
493 dev_dbg(sport->port.dev, "exit in %s.\n", __func__);
494 return;
495 }
496
497 spin_lock_irqsave(&sport->port.lock, flags);
498 if (!uart_circ_empty(xmit) && !uart_tx_stopped(&sport->port))
499 imx_dma_tx(sport);
500 spin_unlock_irqrestore(&sport->port.lock, flags);
501 }
502
503 static void imx_dma_tx(struct imx_port *sport)
504 {
505 struct circ_buf *xmit = &sport->port.state->xmit;
506 struct scatterlist *sgl = sport->tx_sgl;
507 struct dma_async_tx_descriptor *desc;
508 struct dma_chan *chan = sport->dma_chan_tx;
509 struct device *dev = sport->port.dev;
510 unsigned long temp;
511 int ret;
512
513 if (sport->dma_is_txing)
514 return;
515
516 sport->tx_bytes = uart_circ_chars_pending(xmit);
517
518 if (xmit->tail < xmit->head) {
519 sport->dma_tx_nents = 1;
520 sg_init_one(sgl, xmit->buf + xmit->tail, sport->tx_bytes);
521 } else {
522 sport->dma_tx_nents = 2;
523 sg_init_table(sgl, 2);
524 sg_set_buf(sgl, xmit->buf + xmit->tail,
525 UART_XMIT_SIZE - xmit->tail);
526 sg_set_buf(sgl + 1, xmit->buf, xmit->head);
527 }
528
529 ret = dma_map_sg(dev, sgl, sport->dma_tx_nents, DMA_TO_DEVICE);
530 if (ret == 0) {
531 dev_err(dev, "DMA mapping error for TX.\n");
532 return;
533 }
534 desc = dmaengine_prep_slave_sg(chan, sgl, sport->dma_tx_nents,
535 DMA_MEM_TO_DEV, DMA_PREP_INTERRUPT);
536 if (!desc) {
537 dma_unmap_sg(dev, sgl, sport->dma_tx_nents,
538 DMA_TO_DEVICE);
539 dev_err(dev, "We cannot prepare for the TX slave dma!\n");
540 return;
541 }
542 desc->callback = dma_tx_callback;
543 desc->callback_param = sport;
544
545 dev_dbg(dev, "TX: prepare to send %lu bytes by DMA.\n",
546 uart_circ_chars_pending(xmit));
547
548 temp = readl(sport->port.membase + UCR1);
549 temp |= UCR1_TDMAEN;
550 writel(temp, sport->port.membase + UCR1);
551
552 /* fire it */
553 sport->dma_is_txing = 1;
554 dmaengine_submit(desc);
555 dma_async_issue_pending(chan);
556 return;
557 }
558
559 /*
560 * interrupts disabled on entry
561 */
562 static void imx_start_tx(struct uart_port *port)
563 {
564 struct imx_port *sport = (struct imx_port *)port;
565 unsigned long temp;
566
567 if (port->rs485.flags & SER_RS485_ENABLED) {
568 temp = readl(port->membase + UCR2);
569 if (port->rs485.flags & SER_RS485_RTS_ON_SEND)
570 imx_port_rts_inactive(sport, &temp);
571 else
572 imx_port_rts_active(sport, &temp);
573 if (!(port->rs485.flags & SER_RS485_RX_DURING_TX))
574 temp &= ~UCR2_RXEN;
575 writel(temp, port->membase + UCR2);
576
577 /* enable transmitter and shifter empty irq */
578 temp = readl(port->membase + UCR4);
579 temp |= UCR4_TCEN;
580 writel(temp, port->membase + UCR4);
581 }
582
583 if (!sport->dma_is_enabled) {
584 temp = readl(sport->port.membase + UCR1);
585 writel(temp | UCR1_TXMPTYEN, sport->port.membase + UCR1);
586 }
587
588 if (sport->dma_is_enabled) {
589 if (sport->port.x_char) {
590 /* We have X-char to send, so enable TX IRQ and
591 * disable TX DMA to let TX interrupt to send X-char */
592 temp = readl(sport->port.membase + UCR1);
593 temp &= ~UCR1_TDMAEN;
594 temp |= UCR1_TXMPTYEN;
595 writel(temp, sport->port.membase + UCR1);
596 return;
597 }
598
599 if (!uart_circ_empty(&port->state->xmit) &&
600 !uart_tx_stopped(port))
601 imx_dma_tx(sport);
602 return;
603 }
604 }
605
606 static irqreturn_t imx_rtsint(int irq, void *dev_id)
607 {
608 struct imx_port *sport = dev_id;
609 unsigned int val;
610 unsigned long flags;
611
612 spin_lock_irqsave(&sport->port.lock, flags);
613
614 writel(USR1_RTSD, sport->port.membase + USR1);
615 val = readl(sport->port.membase + USR1) & USR1_RTSS;
616 uart_handle_cts_change(&sport->port, !!val);
617 wake_up_interruptible(&sport->port.state->port.delta_msr_wait);
618
619 spin_unlock_irqrestore(&sport->port.lock, flags);
620 return IRQ_HANDLED;
621 }
622
623 static irqreturn_t imx_txint(int irq, void *dev_id)
624 {
625 struct imx_port *sport = dev_id;
626 unsigned long flags;
627
628 spin_lock_irqsave(&sport->port.lock, flags);
629 imx_transmit_buffer(sport);
630 spin_unlock_irqrestore(&sport->port.lock, flags);
631 return IRQ_HANDLED;
632 }
633
634 static irqreturn_t imx_rxint(int irq, void *dev_id)
635 {
636 struct imx_port *sport = dev_id;
637 unsigned int rx, flg, ignored = 0;
638 struct tty_port *port = &sport->port.state->port;
639 unsigned long flags, temp;
640
641 spin_lock_irqsave(&sport->port.lock, flags);
642
643 while (readl(sport->port.membase + USR2) & USR2_RDR) {
644 flg = TTY_NORMAL;
645 sport->port.icount.rx++;
646
647 rx = readl(sport->port.membase + URXD0);
648
649 temp = readl(sport->port.membase + USR2);
650 if (temp & USR2_BRCD) {
651 writel(USR2_BRCD, sport->port.membase + USR2);
652 if (uart_handle_break(&sport->port))
653 continue;
654 }
655
656 if (uart_handle_sysrq_char(&sport->port, (unsigned char)rx))
657 continue;
658
659 if (unlikely(rx & URXD_ERR)) {
660 if (rx & URXD_BRK)
661 sport->port.icount.brk++;
662 else if (rx & URXD_PRERR)
663 sport->port.icount.parity++;
664 else if (rx & URXD_FRMERR)
665 sport->port.icount.frame++;
666 if (rx & URXD_OVRRUN)
667 sport->port.icount.overrun++;
668
669 if (rx & sport->port.ignore_status_mask) {
670 if (++ignored > 100)
671 goto out;
672 continue;
673 }
674
675 rx &= (sport->port.read_status_mask | 0xFF);
676
677 if (rx & URXD_BRK)
678 flg = TTY_BREAK;
679 else if (rx & URXD_PRERR)
680 flg = TTY_PARITY;
681 else if (rx & URXD_FRMERR)
682 flg = TTY_FRAME;
683 if (rx & URXD_OVRRUN)
684 flg = TTY_OVERRUN;
685
686 #ifdef SUPPORT_SYSRQ
687 sport->port.sysrq = 0;
688 #endif
689 }
690
691 if (sport->port.ignore_status_mask & URXD_DUMMY_READ)
692 goto out;
693
694 if (tty_insert_flip_char(port, rx, flg) == 0)
695 sport->port.icount.buf_overrun++;
696 }
697
698 out:
699 spin_unlock_irqrestore(&sport->port.lock, flags);
700 tty_flip_buffer_push(port);
701 return IRQ_HANDLED;
702 }
703
704 static int start_rx_dma(struct imx_port *sport);
705 /*
706 * If the RXFIFO is filled with some data, and then we
707 * arise a DMA operation to receive them.
708 */
709 static void imx_dma_rxint(struct imx_port *sport)
710 {
711 unsigned long temp;
712 unsigned long flags;
713
714 spin_lock_irqsave(&sport->port.lock, flags);
715
716 temp = readl(sport->port.membase + USR2);
717 if ((temp & USR2_RDR) && !sport->dma_is_rxing) {
718 sport->dma_is_rxing = 1;
719
720 /* disable the receiver ready and aging timer interrupts */
721 temp = readl(sport->port.membase + UCR1);
722 temp &= ~(UCR1_RRDYEN);
723 writel(temp, sport->port.membase + UCR1);
724
725 temp = readl(sport->port.membase + UCR2);
726 temp &= ~(UCR2_ATEN);
727 writel(temp, sport->port.membase + UCR2);
728
729 /* tell the DMA to receive the data. */
730 start_rx_dma(sport);
731 }
732
733 spin_unlock_irqrestore(&sport->port.lock, flags);
734 }
735
736 /*
737 * We have a modem side uart, so the meanings of RTS and CTS are inverted.
738 */
739 static unsigned int imx_get_hwmctrl(struct imx_port *sport)
740 {
741 unsigned int tmp = TIOCM_DSR;
742 unsigned usr1 = readl(sport->port.membase + USR1);
743
744 if (usr1 & USR1_RTSS)
745 tmp |= TIOCM_CTS;
746
747 /* in DCE mode DCDIN is always 0 */
748 if (!(usr1 & USR2_DCDIN))
749 tmp |= TIOCM_CAR;
750
751 if (sport->dte_mode)
752 if (!(readl(sport->port.membase + USR2) & USR2_RIIN))
753 tmp |= TIOCM_RI;
754
755 return tmp;
756 }
757
758 /*
759 * Handle any change of modem status signal since we were last called.
760 */
761 static void imx_mctrl_check(struct imx_port *sport)
762 {
763 unsigned int status, changed;
764
765 status = imx_get_hwmctrl(sport);
766 changed = status ^ sport->old_status;
767
768 if (changed == 0)
769 return;
770
771 sport->old_status = status;
772
773 if (changed & TIOCM_RI && status & TIOCM_RI)
774 sport->port.icount.rng++;
775 if (changed & TIOCM_DSR)
776 sport->port.icount.dsr++;
777 if (changed & TIOCM_CAR)
778 uart_handle_dcd_change(&sport->port, status & TIOCM_CAR);
779 if (changed & TIOCM_CTS)
780 uart_handle_cts_change(&sport->port, status & TIOCM_CTS);
781
782 wake_up_interruptible(&sport->port.state->port.delta_msr_wait);
783 }
784
785 static irqreturn_t imx_int(int irq, void *dev_id)
786 {
787 struct imx_port *sport = dev_id;
788 unsigned int sts;
789 unsigned int sts2;
790 irqreturn_t ret = IRQ_NONE;
791
792 sts = readl(sport->port.membase + USR1);
793 sts2 = readl(sport->port.membase + USR2);
794
795 if (sts & (USR1_RRDY | USR1_AGTIM)) {
796 if (sport->dma_is_enabled)
797 imx_dma_rxint(sport);
798 else
799 imx_rxint(irq, dev_id);
800 ret = IRQ_HANDLED;
801 }
802
803 if ((sts & USR1_TRDY &&
804 readl(sport->port.membase + UCR1) & UCR1_TXMPTYEN) ||
805 (sts2 & USR2_TXDC &&
806 readl(sport->port.membase + UCR4) & UCR4_TCEN)) {
807 imx_txint(irq, dev_id);
808 ret = IRQ_HANDLED;
809 }
810
811 if (sts & USR1_DTRD) {
812 unsigned long flags;
813
814 if (sts & USR1_DTRD)
815 writel(USR1_DTRD, sport->port.membase + USR1);
816
817 spin_lock_irqsave(&sport->port.lock, flags);
818 imx_mctrl_check(sport);
819 spin_unlock_irqrestore(&sport->port.lock, flags);
820
821 ret = IRQ_HANDLED;
822 }
823
824 if (sts & USR1_RTSD) {
825 imx_rtsint(irq, dev_id);
826 ret = IRQ_HANDLED;
827 }
828
829 if (sts & USR1_AWAKE) {
830 writel(USR1_AWAKE, sport->port.membase + USR1);
831 ret = IRQ_HANDLED;
832 }
833
834 if (sts2 & USR2_ORE) {
835 sport->port.icount.overrun++;
836 writel(USR2_ORE, sport->port.membase + USR2);
837 ret = IRQ_HANDLED;
838 }
839
840 return ret;
841 }
842
843 /*
844 * Return TIOCSER_TEMT when transmitter is not busy.
845 */
846 static unsigned int imx_tx_empty(struct uart_port *port)
847 {
848 struct imx_port *sport = (struct imx_port *)port;
849 unsigned int ret;
850
851 ret = (readl(sport->port.membase + USR2) & USR2_TXDC) ? TIOCSER_TEMT : 0;
852
853 /* If the TX DMA is working, return 0. */
854 if (sport->dma_is_enabled && sport->dma_is_txing)
855 ret = 0;
856
857 return ret;
858 }
859
860 static unsigned int imx_get_mctrl(struct uart_port *port)
861 {
862 struct imx_port *sport = (struct imx_port *)port;
863 unsigned int ret = imx_get_hwmctrl(sport);
864
865 mctrl_gpio_get(sport->gpios, &ret);
866
867 return ret;
868 }
869
870 static void imx_set_mctrl(struct uart_port *port, unsigned int mctrl)
871 {
872 struct imx_port *sport = (struct imx_port *)port;
873 unsigned long temp;
874
875 if (!(port->rs485.flags & SER_RS485_ENABLED)) {
876 temp = readl(sport->port.membase + UCR2);
877 temp &= ~(UCR2_CTS | UCR2_CTSC);
878 if (mctrl & TIOCM_RTS)
879 temp |= UCR2_CTS | UCR2_CTSC;
880 writel(temp, sport->port.membase + UCR2);
881 }
882
883 temp = readl(sport->port.membase + UCR3) & ~UCR3_DSR;
884 if (!(mctrl & TIOCM_DTR))
885 temp |= UCR3_DSR;
886 writel(temp, sport->port.membase + UCR3);
887
888 temp = readl(sport->port.membase + uts_reg(sport)) & ~UTS_LOOP;
889 if (mctrl & TIOCM_LOOP)
890 temp |= UTS_LOOP;
891 writel(temp, sport->port.membase + uts_reg(sport));
892
893 mctrl_gpio_set(sport->gpios, mctrl);
894 }
895
896 /*
897 * Interrupts always disabled.
898 */
899 static void imx_break_ctl(struct uart_port *port, int break_state)
900 {
901 struct imx_port *sport = (struct imx_port *)port;
902 unsigned long flags, temp;
903
904 spin_lock_irqsave(&sport->port.lock, flags);
905
906 temp = readl(sport->port.membase + UCR1) & ~UCR1_SNDBRK;
907
908 if (break_state != 0)
909 temp |= UCR1_SNDBRK;
910
911 writel(temp, sport->port.membase + UCR1);
912
913 spin_unlock_irqrestore(&sport->port.lock, flags);
914 }
915
916 /*
917 * This is our per-port timeout handler, for checking the
918 * modem status signals.
919 */
920 static void imx_timeout(unsigned long data)
921 {
922 struct imx_port *sport = (struct imx_port *)data;
923 unsigned long flags;
924
925 if (sport->port.state) {
926 spin_lock_irqsave(&sport->port.lock, flags);
927 imx_mctrl_check(sport);
928 spin_unlock_irqrestore(&sport->port.lock, flags);
929
930 mod_timer(&sport->timer, jiffies + MCTRL_TIMEOUT);
931 }
932 }
933
934 #define RX_BUF_SIZE (PAGE_SIZE)
935 static void imx_rx_dma_done(struct imx_port *sport)
936 {
937 unsigned long temp;
938 unsigned long flags;
939
940 spin_lock_irqsave(&sport->port.lock, flags);
941
942 /* re-enable interrupts to get notified when new symbols are incoming */
943 temp = readl(sport->port.membase + UCR1);
944 temp |= UCR1_RRDYEN;
945 writel(temp, sport->port.membase + UCR1);
946
947 temp = readl(sport->port.membase + UCR2);
948 temp |= UCR2_ATEN;
949 writel(temp, sport->port.membase + UCR2);
950
951 sport->dma_is_rxing = 0;
952
953 /* Is the shutdown waiting for us? */
954 if (waitqueue_active(&sport->dma_wait))
955 wake_up(&sport->dma_wait);
956
957 spin_unlock_irqrestore(&sport->port.lock, flags);
958 }
959
960 /*
961 * There are two kinds of RX DMA interrupts(such as in the MX6Q):
962 * [1] the RX DMA buffer is full.
963 * [2] the aging timer expires
964 *
965 * Condition [2] is triggered when a character has been sitting in the FIFO
966 * for at least 8 byte durations.
967 */
968 static void dma_rx_callback(void *data)
969 {
970 struct imx_port *sport = data;
971 struct dma_chan *chan = sport->dma_chan_rx;
972 struct scatterlist *sgl = &sport->rx_sgl;
973 struct tty_port *port = &sport->port.state->port;
974 struct dma_tx_state state;
975 enum dma_status status;
976 unsigned int count;
977
978 /* unmap it first */
979 dma_unmap_sg(sport->port.dev, sgl, 1, DMA_FROM_DEVICE);
980
981 status = dmaengine_tx_status(chan, (dma_cookie_t)0, &state);
982 count = RX_BUF_SIZE - state.residue;
983
984 dev_dbg(sport->port.dev, "We get %d bytes.\n", count);
985
986 if (count) {
987 if (!(sport->port.ignore_status_mask & URXD_DUMMY_READ)) {
988 int bytes = tty_insert_flip_string(port, sport->rx_buf,
989 count);
990
991 if (bytes != count)
992 sport->port.icount.buf_overrun++;
993 }
994 tty_flip_buffer_push(port);
995 sport->port.icount.rx += count;
996 }
997
998 /*
999 * Restart RX DMA directly if more data is available in order to skip
1000 * the roundtrip through the IRQ handler. If there is some data already
1001 * in the FIFO, DMA needs to be restarted soon anyways.
1002 *
1003 * Otherwise stop the DMA and reactivate FIFO IRQs to restart DMA once
1004 * data starts to arrive again.
1005 */
1006 if (readl(sport->port.membase + USR2) & USR2_RDR)
1007 start_rx_dma(sport);
1008 else
1009 imx_rx_dma_done(sport);
1010 }
1011
1012 static int start_rx_dma(struct imx_port *sport)
1013 {
1014 struct scatterlist *sgl = &sport->rx_sgl;
1015 struct dma_chan *chan = sport->dma_chan_rx;
1016 struct device *dev = sport->port.dev;
1017 struct dma_async_tx_descriptor *desc;
1018 int ret;
1019
1020 sg_init_one(sgl, sport->rx_buf, RX_BUF_SIZE);
1021 ret = dma_map_sg(dev, sgl, 1, DMA_FROM_DEVICE);
1022 if (ret == 0) {
1023 dev_err(dev, "DMA mapping error for RX.\n");
1024 return -EINVAL;
1025 }
1026 desc = dmaengine_prep_slave_sg(chan, sgl, 1, DMA_DEV_TO_MEM,
1027 DMA_PREP_INTERRUPT);
1028 if (!desc) {
1029 dma_unmap_sg(dev, sgl, 1, DMA_FROM_DEVICE);
1030 dev_err(dev, "We cannot prepare for the RX slave dma!\n");
1031 return -EINVAL;
1032 }
1033 desc->callback = dma_rx_callback;
1034 desc->callback_param = sport;
1035
1036 dev_dbg(dev, "RX: prepare for the DMA.\n");
1037 dmaengine_submit(desc);
1038 dma_async_issue_pending(chan);
1039 return 0;
1040 }
1041
1042 #define TXTL_DEFAULT 2 /* reset default */
1043 #define RXTL_DEFAULT 1 /* reset default */
1044 #define TXTL_DMA 8 /* DMA burst setting */
1045 #define RXTL_DMA 9 /* DMA burst setting */
1046
1047 static void imx_setup_ufcr(struct imx_port *sport,
1048 unsigned char txwl, unsigned char rxwl)
1049 {
1050 unsigned int val;
1051
1052 /* set receiver / transmitter trigger level */
1053 val = readl(sport->port.membase + UFCR) & (UFCR_RFDIV | UFCR_DCEDTE);
1054 val |= txwl << UFCR_TXTL_SHF | rxwl;
1055 writel(val, sport->port.membase + UFCR);
1056 }
1057
1058 static void imx_uart_dma_exit(struct imx_port *sport)
1059 {
1060 if (sport->dma_chan_rx) {
1061 dma_release_channel(sport->dma_chan_rx);
1062 sport->dma_chan_rx = NULL;
1063
1064 kfree(sport->rx_buf);
1065 sport->rx_buf = NULL;
1066 }
1067
1068 if (sport->dma_chan_tx) {
1069 dma_release_channel(sport->dma_chan_tx);
1070 sport->dma_chan_tx = NULL;
1071 }
1072
1073 sport->dma_is_inited = 0;
1074 }
1075
1076 static int imx_uart_dma_init(struct imx_port *sport)
1077 {
1078 struct dma_slave_config slave_config = {};
1079 struct device *dev = sport->port.dev;
1080 int ret;
1081
1082 /* Prepare for RX : */
1083 sport->dma_chan_rx = dma_request_slave_channel(dev, "rx");
1084 if (!sport->dma_chan_rx) {
1085 dev_dbg(dev, "cannot get the DMA channel.\n");
1086 ret = -EINVAL;
1087 goto err;
1088 }
1089
1090 slave_config.direction = DMA_DEV_TO_MEM;
1091 slave_config.src_addr = sport->port.mapbase + URXD0;
1092 slave_config.src_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE;
1093 /* one byte less than the watermark level to enable the aging timer */
1094 slave_config.src_maxburst = RXTL_DMA - 1;
1095 ret = dmaengine_slave_config(sport->dma_chan_rx, &slave_config);
1096 if (ret) {
1097 dev_err(dev, "error in RX dma configuration.\n");
1098 goto err;
1099 }
1100
1101 sport->rx_buf = kzalloc(PAGE_SIZE, GFP_KERNEL);
1102 if (!sport->rx_buf) {
1103 ret = -ENOMEM;
1104 goto err;
1105 }
1106
1107 /* Prepare for TX : */
1108 sport->dma_chan_tx = dma_request_slave_channel(dev, "tx");
1109 if (!sport->dma_chan_tx) {
1110 dev_err(dev, "cannot get the TX DMA channel!\n");
1111 ret = -EINVAL;
1112 goto err;
1113 }
1114
1115 slave_config.direction = DMA_MEM_TO_DEV;
1116 slave_config.dst_addr = sport->port.mapbase + URTX0;
1117 slave_config.dst_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE;
1118 slave_config.dst_maxburst = TXTL_DMA;
1119 ret = dmaengine_slave_config(sport->dma_chan_tx, &slave_config);
1120 if (ret) {
1121 dev_err(dev, "error in TX dma configuration.");
1122 goto err;
1123 }
1124
1125 sport->dma_is_inited = 1;
1126
1127 return 0;
1128 err:
1129 imx_uart_dma_exit(sport);
1130 return ret;
1131 }
1132
1133 static void imx_enable_dma(struct imx_port *sport)
1134 {
1135 unsigned long temp;
1136
1137 init_waitqueue_head(&sport->dma_wait);
1138
1139 /* set UCR1 */
1140 temp = readl(sport->port.membase + UCR1);
1141 temp |= UCR1_RDMAEN | UCR1_TDMAEN | UCR1_ATDMAEN;
1142 writel(temp, sport->port.membase + UCR1);
1143
1144 temp = readl(sport->port.membase + UCR2);
1145 temp |= UCR2_ATEN;
1146 writel(temp, sport->port.membase + UCR2);
1147
1148 imx_setup_ufcr(sport, TXTL_DMA, RXTL_DMA);
1149
1150 sport->dma_is_enabled = 1;
1151 }
1152
1153 static void imx_disable_dma(struct imx_port *sport)
1154 {
1155 unsigned long temp;
1156
1157 /* clear UCR1 */
1158 temp = readl(sport->port.membase + UCR1);
1159 temp &= ~(UCR1_RDMAEN | UCR1_TDMAEN | UCR1_ATDMAEN);
1160 writel(temp, sport->port.membase + UCR1);
1161
1162 /* clear UCR2 */
1163 temp = readl(sport->port.membase + UCR2);
1164 temp &= ~(UCR2_CTSC | UCR2_CTS | UCR2_ATEN);
1165 writel(temp, sport->port.membase + UCR2);
1166
1167 imx_setup_ufcr(sport, TXTL_DEFAULT, RXTL_DEFAULT);
1168
1169 sport->dma_is_enabled = 0;
1170 }
1171
1172 /* half the RX buffer size */
1173 #define CTSTL 16
1174
1175 static int imx_startup(struct uart_port *port)
1176 {
1177 struct imx_port *sport = (struct imx_port *)port;
1178 int retval, i;
1179 unsigned long flags, temp;
1180
1181 retval = clk_prepare_enable(sport->clk_per);
1182 if (retval)
1183 return retval;
1184 retval = clk_prepare_enable(sport->clk_ipg);
1185 if (retval) {
1186 clk_disable_unprepare(sport->clk_per);
1187 return retval;
1188 }
1189
1190 imx_setup_ufcr(sport, TXTL_DEFAULT, RXTL_DEFAULT);
1191
1192 /* disable the DREN bit (Data Ready interrupt enable) before
1193 * requesting IRQs
1194 */
1195 temp = readl(sport->port.membase + UCR4);
1196
1197 /* set the trigger level for CTS */
1198 temp &= ~(UCR4_CTSTL_MASK << UCR4_CTSTL_SHF);
1199 temp |= CTSTL << UCR4_CTSTL_SHF;
1200
1201 writel(temp & ~UCR4_DREN, sport->port.membase + UCR4);
1202
1203 /* Can we enable the DMA support? */
1204 if (is_imx6q_uart(sport) && !uart_console(port) &&
1205 !sport->dma_is_inited)
1206 imx_uart_dma_init(sport);
1207
1208 spin_lock_irqsave(&sport->port.lock, flags);
1209 /* Reset fifo's and state machines */
1210 i = 100;
1211
1212 temp = readl(sport->port.membase + UCR2);
1213 temp &= ~UCR2_SRST;
1214 writel(temp, sport->port.membase + UCR2);
1215
1216 while (!(readl(sport->port.membase + UCR2) & UCR2_SRST) && (--i > 0))
1217 udelay(1);
1218
1219 /*
1220 * Finally, clear and enable interrupts
1221 */
1222 writel(USR1_RTSD | USR1_DTRD, sport->port.membase + USR1);
1223 writel(USR2_ORE, sport->port.membase + USR2);
1224
1225 if (sport->dma_is_inited && !sport->dma_is_enabled)
1226 imx_enable_dma(sport);
1227
1228 temp = readl(sport->port.membase + UCR1);
1229 temp |= UCR1_RRDYEN | UCR1_RTSDEN | UCR1_UARTEN;
1230
1231 writel(temp, sport->port.membase + UCR1);
1232
1233 temp = readl(sport->port.membase + UCR4);
1234 temp |= UCR4_OREN;
1235 writel(temp, sport->port.membase + UCR4);
1236
1237 temp = readl(sport->port.membase + UCR2);
1238 temp |= (UCR2_RXEN | UCR2_TXEN);
1239 if (!sport->have_rtscts)
1240 temp |= UCR2_IRTS;
1241 /*
1242 * make sure the edge sensitive RTS-irq is disabled,
1243 * we're using RTSD instead.
1244 */
1245 if (!is_imx1_uart(sport))
1246 temp &= ~UCR2_RTSEN;
1247 writel(temp, sport->port.membase + UCR2);
1248
1249 if (!is_imx1_uart(sport)) {
1250 temp = readl(sport->port.membase + UCR3);
1251
1252 /*
1253 * The effect of RI and DCD differs depending on the UFCR_DCEDTE
1254 * bit. In DCE mode they control the outputs, in DTE mode they
1255 * enable the respective irqs. At least the DCD irq cannot be
1256 * cleared on i.MX25 at least, so it's not usable and must be
1257 * disabled. I don't have test hardware to check if RI has the
1258 * same problem but I consider this likely so it's disabled for
1259 * now, too.
1260 */
1261 temp |= IMX21_UCR3_RXDMUXSEL | UCR3_ADNIMP |
1262 UCR3_DTRDEN | UCR3_RI | UCR3_DCD;
1263
1264 if (sport->dte_mode)
1265 temp &= ~(UCR3_RI | UCR3_DCD);
1266
1267 writel(temp, sport->port.membase + UCR3);
1268 }
1269
1270 /*
1271 * Enable modem status interrupts
1272 */
1273 imx_enable_ms(&sport->port);
1274 spin_unlock_irqrestore(&sport->port.lock, flags);
1275
1276 return 0;
1277 }
1278
1279 static void imx_shutdown(struct uart_port *port)
1280 {
1281 struct imx_port *sport = (struct imx_port *)port;
1282 unsigned long temp;
1283 unsigned long flags;
1284
1285 if (sport->dma_is_enabled) {
1286 int ret;
1287
1288 /* We have to wait for the DMA to finish. */
1289 ret = wait_event_interruptible(sport->dma_wait,
1290 !sport->dma_is_rxing && !sport->dma_is_txing);
1291 if (ret != 0) {
1292 sport->dma_is_rxing = 0;
1293 sport->dma_is_txing = 0;
1294 dmaengine_terminate_all(sport->dma_chan_tx);
1295 dmaengine_terminate_all(sport->dma_chan_rx);
1296 }
1297 spin_lock_irqsave(&sport->port.lock, flags);
1298 imx_stop_tx(port);
1299 imx_stop_rx(port);
1300 imx_disable_dma(sport);
1301 spin_unlock_irqrestore(&sport->port.lock, flags);
1302 imx_uart_dma_exit(sport);
1303 }
1304
1305 mctrl_gpio_disable_ms(sport->gpios);
1306
1307 spin_lock_irqsave(&sport->port.lock, flags);
1308 temp = readl(sport->port.membase + UCR2);
1309 temp &= ~(UCR2_TXEN);
1310 writel(temp, sport->port.membase + UCR2);
1311 spin_unlock_irqrestore(&sport->port.lock, flags);
1312
1313 /*
1314 * Stop our timer.
1315 */
1316 del_timer_sync(&sport->timer);
1317
1318 /*
1319 * Disable all interrupts, port and break condition.
1320 */
1321
1322 spin_lock_irqsave(&sport->port.lock, flags);
1323 temp = readl(sport->port.membase + UCR1);
1324 temp &= ~(UCR1_TXMPTYEN | UCR1_RRDYEN | UCR1_RTSDEN | UCR1_UARTEN);
1325
1326 writel(temp, sport->port.membase + UCR1);
1327 spin_unlock_irqrestore(&sport->port.lock, flags);
1328
1329 clk_disable_unprepare(sport->clk_per);
1330 clk_disable_unprepare(sport->clk_ipg);
1331 }
1332
1333 static void imx_flush_buffer(struct uart_port *port)
1334 {
1335 struct imx_port *sport = (struct imx_port *)port;
1336 struct scatterlist *sgl = &sport->tx_sgl[0];
1337 unsigned long temp;
1338 int i = 100, ubir, ubmr, uts;
1339
1340 if (!sport->dma_chan_tx)
1341 return;
1342
1343 sport->tx_bytes = 0;
1344 dmaengine_terminate_all(sport->dma_chan_tx);
1345 if (sport->dma_is_txing) {
1346 dma_unmap_sg(sport->port.dev, sgl, sport->dma_tx_nents,
1347 DMA_TO_DEVICE);
1348 temp = readl(sport->port.membase + UCR1);
1349 temp &= ~UCR1_TDMAEN;
1350 writel(temp, sport->port.membase + UCR1);
1351 sport->dma_is_txing = false;
1352 }
1353
1354 /*
1355 * According to the Reference Manual description of the UART SRST bit:
1356 * "Reset the transmit and receive state machines,
1357 * all FIFOs and register USR1, USR2, UBIR, UBMR, UBRC, URXD, UTXD
1358 * and UTS[6-3]". As we don't need to restore the old values from
1359 * USR1, USR2, URXD, UTXD, only save/restore the other four registers
1360 */
1361 ubir = readl(sport->port.membase + UBIR);
1362 ubmr = readl(sport->port.membase + UBMR);
1363 uts = readl(sport->port.membase + IMX21_UTS);
1364
1365 temp = readl(sport->port.membase + UCR2);
1366 temp &= ~UCR2_SRST;
1367 writel(temp, sport->port.membase + UCR2);
1368
1369 while (!(readl(sport->port.membase + UCR2) & UCR2_SRST) && (--i > 0))
1370 udelay(1);
1371
1372 /* Restore the registers */
1373 writel(ubir, sport->port.membase + UBIR);
1374 writel(ubmr, sport->port.membase + UBMR);
1375 writel(uts, sport->port.membase + IMX21_UTS);
1376 }
1377
1378 static void
1379 imx_set_termios(struct uart_port *port, struct ktermios *termios,
1380 struct ktermios *old)
1381 {
1382 struct imx_port *sport = (struct imx_port *)port;
1383 unsigned long flags;
1384 unsigned long ucr2, old_ucr1, old_ucr2;
1385 unsigned int baud, quot;
1386 unsigned int old_csize = old ? old->c_cflag & CSIZE : CS8;
1387 unsigned long div, ufcr;
1388 unsigned long num, denom;
1389 uint64_t tdiv64;
1390
1391 /*
1392 * We only support CS7 and CS8.
1393 */
1394 while ((termios->c_cflag & CSIZE) != CS7 &&
1395 (termios->c_cflag & CSIZE) != CS8) {
1396 termios->c_cflag &= ~CSIZE;
1397 termios->c_cflag |= old_csize;
1398 old_csize = CS8;
1399 }
1400
1401 if ((termios->c_cflag & CSIZE) == CS8)
1402 ucr2 = UCR2_WS | UCR2_SRST | UCR2_IRTS;
1403 else
1404 ucr2 = UCR2_SRST | UCR2_IRTS;
1405
1406 if (termios->c_cflag & CRTSCTS) {
1407 if (sport->have_rtscts) {
1408 ucr2 &= ~UCR2_IRTS;
1409
1410 if (port->rs485.flags & SER_RS485_ENABLED) {
1411 /*
1412 * RTS is mandatory for rs485 operation, so keep
1413 * it under manual control and keep transmitter
1414 * disabled.
1415 */
1416 if (port->rs485.flags &
1417 SER_RS485_RTS_AFTER_SEND)
1418 imx_port_rts_inactive(sport, &ucr2);
1419 else
1420 imx_port_rts_active(sport, &ucr2);
1421 } else {
1422 imx_port_rts_auto(sport, &ucr2);
1423 }
1424 } else {
1425 termios->c_cflag &= ~CRTSCTS;
1426 }
1427 } else if (port->rs485.flags & SER_RS485_ENABLED) {
1428 /* disable transmitter */
1429 if (port->rs485.flags & SER_RS485_RTS_AFTER_SEND)
1430 imx_port_rts_inactive(sport, &ucr2);
1431 else
1432 imx_port_rts_active(sport, &ucr2);
1433 }
1434
1435
1436 if (termios->c_cflag & CSTOPB)
1437 ucr2 |= UCR2_STPB;
1438 if (termios->c_cflag & PARENB) {
1439 ucr2 |= UCR2_PREN;
1440 if (termios->c_cflag & PARODD)
1441 ucr2 |= UCR2_PROE;
1442 }
1443
1444 del_timer_sync(&sport->timer);
1445
1446 /*
1447 * Ask the core to calculate the divisor for us.
1448 */
1449 baud = uart_get_baud_rate(port, termios, old, 50, port->uartclk / 16);
1450 quot = uart_get_divisor(port, baud);
1451
1452 spin_lock_irqsave(&sport->port.lock, flags);
1453
1454 sport->port.read_status_mask = 0;
1455 if (termios->c_iflag & INPCK)
1456 sport->port.read_status_mask |= (URXD_FRMERR | URXD_PRERR);
1457 if (termios->c_iflag & (BRKINT | PARMRK))
1458 sport->port.read_status_mask |= URXD_BRK;
1459
1460 /*
1461 * Characters to ignore
1462 */
1463 sport->port.ignore_status_mask = 0;
1464 if (termios->c_iflag & IGNPAR)
1465 sport->port.ignore_status_mask |= URXD_PRERR | URXD_FRMERR;
1466 if (termios->c_iflag & IGNBRK) {
1467 sport->port.ignore_status_mask |= URXD_BRK;
1468 /*
1469 * If we're ignoring parity and break indicators,
1470 * ignore overruns too (for real raw support).
1471 */
1472 if (termios->c_iflag & IGNPAR)
1473 sport->port.ignore_status_mask |= URXD_OVRRUN;
1474 }
1475
1476 if ((termios->c_cflag & CREAD) == 0)
1477 sport->port.ignore_status_mask |= URXD_DUMMY_READ;
1478
1479 /*
1480 * Update the per-port timeout.
1481 */
1482 uart_update_timeout(port, termios->c_cflag, baud);
1483
1484 /*
1485 * disable interrupts and drain transmitter
1486 */
1487 old_ucr1 = readl(sport->port.membase + UCR1);
1488 writel(old_ucr1 & ~(UCR1_TXMPTYEN | UCR1_RRDYEN | UCR1_RTSDEN),
1489 sport->port.membase + UCR1);
1490
1491 while (!(readl(sport->port.membase + USR2) & USR2_TXDC))
1492 barrier();
1493
1494 /* then, disable everything */
1495 old_ucr2 = readl(sport->port.membase + UCR2);
1496 writel(old_ucr2 & ~(UCR2_TXEN | UCR2_RXEN),
1497 sport->port.membase + UCR2);
1498 old_ucr2 &= (UCR2_TXEN | UCR2_RXEN | UCR2_ATEN);
1499
1500 /* custom-baudrate handling */
1501 div = sport->port.uartclk / (baud * 16);
1502 if (baud == 38400 && quot != div)
1503 baud = sport->port.uartclk / (quot * 16);
1504
1505 div = sport->port.uartclk / (baud * 16);
1506 if (div > 7)
1507 div = 7;
1508 if (!div)
1509 div = 1;
1510
1511 rational_best_approximation(16 * div * baud, sport->port.uartclk,
1512 1 << 16, 1 << 16, &num, &denom);
1513
1514 tdiv64 = sport->port.uartclk;
1515 tdiv64 *= num;
1516 do_div(tdiv64, denom * 16 * div);
1517 tty_termios_encode_baud_rate(termios,
1518 (speed_t)tdiv64, (speed_t)tdiv64);
1519
1520 num -= 1;
1521 denom -= 1;
1522
1523 ufcr = readl(sport->port.membase + UFCR);
1524 ufcr = (ufcr & (~UFCR_RFDIV)) | UFCR_RFDIV_REG(div);
1525 if (sport->dte_mode)
1526 ufcr |= UFCR_DCEDTE;
1527 writel(ufcr, sport->port.membase + UFCR);
1528
1529 writel(num, sport->port.membase + UBIR);
1530 writel(denom, sport->port.membase + UBMR);
1531
1532 if (!is_imx1_uart(sport))
1533 writel(sport->port.uartclk / div / 1000,
1534 sport->port.membase + IMX21_ONEMS);
1535
1536 writel(old_ucr1, sport->port.membase + UCR1);
1537
1538 /* set the parity, stop bits and data size */
1539 writel(ucr2 | old_ucr2, sport->port.membase + UCR2);
1540
1541 if (UART_ENABLE_MS(&sport->port, termios->c_cflag))
1542 imx_enable_ms(&sport->port);
1543
1544 spin_unlock_irqrestore(&sport->port.lock, flags);
1545 }
1546
1547 static const char *imx_type(struct uart_port *port)
1548 {
1549 struct imx_port *sport = (struct imx_port *)port;
1550
1551 return sport->port.type == PORT_IMX ? "IMX" : NULL;
1552 }
1553
1554 /*
1555 * Configure/autoconfigure the port.
1556 */
1557 static void imx_config_port(struct uart_port *port, int flags)
1558 {
1559 struct imx_port *sport = (struct imx_port *)port;
1560
1561 if (flags & UART_CONFIG_TYPE)
1562 sport->port.type = PORT_IMX;
1563 }
1564
1565 /*
1566 * Verify the new serial_struct (for TIOCSSERIAL).
1567 * The only change we allow are to the flags and type, and
1568 * even then only between PORT_IMX and PORT_UNKNOWN
1569 */
1570 static int
1571 imx_verify_port(struct uart_port *port, struct serial_struct *ser)
1572 {
1573 struct imx_port *sport = (struct imx_port *)port;
1574 int ret = 0;
1575
1576 if (ser->type != PORT_UNKNOWN && ser->type != PORT_IMX)
1577 ret = -EINVAL;
1578 if (sport->port.irq != ser->irq)
1579 ret = -EINVAL;
1580 if (ser->io_type != UPIO_MEM)
1581 ret = -EINVAL;
1582 if (sport->port.uartclk / 16 != ser->baud_base)
1583 ret = -EINVAL;
1584 if (sport->port.mapbase != (unsigned long)ser->iomem_base)
1585 ret = -EINVAL;
1586 if (sport->port.iobase != ser->port)
1587 ret = -EINVAL;
1588 if (ser->hub6 != 0)
1589 ret = -EINVAL;
1590 return ret;
1591 }
1592
1593 #if defined(CONFIG_CONSOLE_POLL)
1594
1595 static int imx_poll_init(struct uart_port *port)
1596 {
1597 struct imx_port *sport = (struct imx_port *)port;
1598 unsigned long flags;
1599 unsigned long temp;
1600 int retval;
1601
1602 retval = clk_prepare_enable(sport->clk_ipg);
1603 if (retval)
1604 return retval;
1605 retval = clk_prepare_enable(sport->clk_per);
1606 if (retval)
1607 clk_disable_unprepare(sport->clk_ipg);
1608
1609 imx_setup_ufcr(sport, TXTL_DEFAULT, RXTL_DEFAULT);
1610
1611 spin_lock_irqsave(&sport->port.lock, flags);
1612
1613 temp = readl(sport->port.membase + UCR1);
1614 if (is_imx1_uart(sport))
1615 temp |= IMX1_UCR1_UARTCLKEN;
1616 temp |= UCR1_UARTEN | UCR1_RRDYEN;
1617 temp &= ~(UCR1_TXMPTYEN | UCR1_RTSDEN);
1618 writel(temp, sport->port.membase + UCR1);
1619
1620 temp = readl(sport->port.membase + UCR2);
1621 temp |= UCR2_RXEN;
1622 writel(temp, sport->port.membase + UCR2);
1623
1624 spin_unlock_irqrestore(&sport->port.lock, flags);
1625
1626 return 0;
1627 }
1628
1629 static int imx_poll_get_char(struct uart_port *port)
1630 {
1631 if (!(readl_relaxed(port->membase + USR2) & USR2_RDR))
1632 return NO_POLL_CHAR;
1633
1634 return readl_relaxed(port->membase + URXD0) & URXD_RX_DATA;
1635 }
1636
1637 static void imx_poll_put_char(struct uart_port *port, unsigned char c)
1638 {
1639 unsigned int status;
1640
1641 /* drain */
1642 do {
1643 status = readl_relaxed(port->membase + USR1);
1644 } while (~status & USR1_TRDY);
1645
1646 /* write */
1647 writel_relaxed(c, port->membase + URTX0);
1648
1649 /* flush */
1650 do {
1651 status = readl_relaxed(port->membase + USR2);
1652 } while (~status & USR2_TXDC);
1653 }
1654 #endif
1655
1656 static int imx_rs485_config(struct uart_port *port,
1657 struct serial_rs485 *rs485conf)
1658 {
1659 struct imx_port *sport = (struct imx_port *)port;
1660 unsigned long temp;
1661
1662 /* unimplemented */
1663 rs485conf->delay_rts_before_send = 0;
1664 rs485conf->delay_rts_after_send = 0;
1665
1666 /* RTS is required to control the transmitter */
1667 if (!sport->have_rtscts)
1668 rs485conf->flags &= ~SER_RS485_ENABLED;
1669
1670 if (rs485conf->flags & SER_RS485_ENABLED) {
1671 /* disable transmitter */
1672 temp = readl(sport->port.membase + UCR2);
1673 if (rs485conf->flags & SER_RS485_RTS_AFTER_SEND)
1674 imx_port_rts_inactive(sport, &temp);
1675 else
1676 imx_port_rts_active(sport, &temp);
1677 writel(temp, sport->port.membase + UCR2);
1678 }
1679
1680 /* Make sure Rx is enabled in case Tx is active with Rx disabled */
1681 if (!(rs485conf->flags & SER_RS485_ENABLED) ||
1682 rs485conf->flags & SER_RS485_RX_DURING_TX) {
1683 temp = readl(sport->port.membase + UCR2);
1684 temp |= UCR2_RXEN;
1685 writel(temp, sport->port.membase + UCR2);
1686 }
1687
1688 port->rs485 = *rs485conf;
1689
1690 return 0;
1691 }
1692
1693 static struct uart_ops imx_pops = {
1694 .tx_empty = imx_tx_empty,
1695 .set_mctrl = imx_set_mctrl,
1696 .get_mctrl = imx_get_mctrl,
1697 .stop_tx = imx_stop_tx,
1698 .start_tx = imx_start_tx,
1699 .stop_rx = imx_stop_rx,
1700 .enable_ms = imx_enable_ms,
1701 .break_ctl = imx_break_ctl,
1702 .startup = imx_startup,
1703 .shutdown = imx_shutdown,
1704 .flush_buffer = imx_flush_buffer,
1705 .set_termios = imx_set_termios,
1706 .type = imx_type,
1707 .config_port = imx_config_port,
1708 .verify_port = imx_verify_port,
1709 #if defined(CONFIG_CONSOLE_POLL)
1710 .poll_init = imx_poll_init,
1711 .poll_get_char = imx_poll_get_char,
1712 .poll_put_char = imx_poll_put_char,
1713 #endif
1714 };
1715
1716 static struct imx_port *imx_ports[UART_NR];
1717
1718 #ifdef CONFIG_SERIAL_IMX_CONSOLE
1719 static void imx_console_putchar(struct uart_port *port, int ch)
1720 {
1721 struct imx_port *sport = (struct imx_port *)port;
1722
1723 while (readl(sport->port.membase + uts_reg(sport)) & UTS_TXFULL)
1724 barrier();
1725
1726 writel(ch, sport->port.membase + URTX0);
1727 }
1728
1729 /*
1730 * Interrupts are disabled on entering
1731 */
1732 static void
1733 imx_console_write(struct console *co, const char *s, unsigned int count)
1734 {
1735 struct imx_port *sport = imx_ports[co->index];
1736 struct imx_port_ucrs old_ucr;
1737 unsigned int ucr1;
1738 unsigned long flags = 0;
1739 int locked = 1;
1740 int retval;
1741
1742 retval = clk_enable(sport->clk_per);
1743 if (retval)
1744 return;
1745 retval = clk_enable(sport->clk_ipg);
1746 if (retval) {
1747 clk_disable(sport->clk_per);
1748 return;
1749 }
1750
1751 if (sport->port.sysrq)
1752 locked = 0;
1753 else if (oops_in_progress)
1754 locked = spin_trylock_irqsave(&sport->port.lock, flags);
1755 else
1756 spin_lock_irqsave(&sport->port.lock, flags);
1757
1758 /*
1759 * First, save UCR1/2/3 and then disable interrupts
1760 */
1761 imx_port_ucrs_save(&sport->port, &old_ucr);
1762 ucr1 = old_ucr.ucr1;
1763
1764 if (is_imx1_uart(sport))
1765 ucr1 |= IMX1_UCR1_UARTCLKEN;
1766 ucr1 |= UCR1_UARTEN;
1767 ucr1 &= ~(UCR1_TXMPTYEN | UCR1_RRDYEN | UCR1_RTSDEN);
1768
1769 writel(ucr1, sport->port.membase + UCR1);
1770
1771 writel(old_ucr.ucr2 | UCR2_TXEN, sport->port.membase + UCR2);
1772
1773 uart_console_write(&sport->port, s, count, imx_console_putchar);
1774
1775 /*
1776 * Finally, wait for transmitter to become empty
1777 * and restore UCR1/2/3
1778 */
1779 while (!(readl(sport->port.membase + USR2) & USR2_TXDC));
1780
1781 imx_port_ucrs_restore(&sport->port, &old_ucr);
1782
1783 if (locked)
1784 spin_unlock_irqrestore(&sport->port.lock, flags);
1785
1786 clk_disable(sport->clk_ipg);
1787 clk_disable(sport->clk_per);
1788 }
1789
1790 /*
1791 * If the port was already initialised (eg, by a boot loader),
1792 * try to determine the current setup.
1793 */
1794 static void __init
1795 imx_console_get_options(struct imx_port *sport, int *baud,
1796 int *parity, int *bits)
1797 {
1798
1799 if (readl(sport->port.membase + UCR1) & UCR1_UARTEN) {
1800 /* ok, the port was enabled */
1801 unsigned int ucr2, ubir, ubmr, uartclk;
1802 unsigned int baud_raw;
1803 unsigned int ucfr_rfdiv;
1804
1805 ucr2 = readl(sport->port.membase + UCR2);
1806
1807 *parity = 'n';
1808 if (ucr2 & UCR2_PREN) {
1809 if (ucr2 & UCR2_PROE)
1810 *parity = 'o';
1811 else
1812 *parity = 'e';
1813 }
1814
1815 if (ucr2 & UCR2_WS)
1816 *bits = 8;
1817 else
1818 *bits = 7;
1819
1820 ubir = readl(sport->port.membase + UBIR) & 0xffff;
1821 ubmr = readl(sport->port.membase + UBMR) & 0xffff;
1822
1823 ucfr_rfdiv = (readl(sport->port.membase + UFCR) & UFCR_RFDIV) >> 7;
1824 if (ucfr_rfdiv == 6)
1825 ucfr_rfdiv = 7;
1826 else
1827 ucfr_rfdiv = 6 - ucfr_rfdiv;
1828
1829 uartclk = clk_get_rate(sport->clk_per);
1830 uartclk /= ucfr_rfdiv;
1831
1832 { /*
1833 * The next code provides exact computation of
1834 * baud_raw = round(((uartclk/16) * (ubir + 1)) / (ubmr + 1))
1835 * without need of float support or long long division,
1836 * which would be required to prevent 32bit arithmetic overflow
1837 */
1838 unsigned int mul = ubir + 1;
1839 unsigned int div = 16 * (ubmr + 1);
1840 unsigned int rem = uartclk % div;
1841
1842 baud_raw = (uartclk / div) * mul;
1843 baud_raw += (rem * mul + div / 2) / div;
1844 *baud = (baud_raw + 50) / 100 * 100;
1845 }
1846
1847 if (*baud != baud_raw)
1848 pr_info("Console IMX rounded baud rate from %d to %d\n",
1849 baud_raw, *baud);
1850 }
1851 }
1852
1853 static int __init
1854 imx_console_setup(struct console *co, char *options)
1855 {
1856 struct imx_port *sport;
1857 int baud = 9600;
1858 int bits = 8;
1859 int parity = 'n';
1860 int flow = 'n';
1861 int retval;
1862
1863 /*
1864 * Check whether an invalid uart number has been specified, and
1865 * if so, search for the first available port that does have
1866 * console support.
1867 */
1868 if (co->index == -1 || co->index >= ARRAY_SIZE(imx_ports))
1869 co->index = 0;
1870 sport = imx_ports[co->index];
1871 if (sport == NULL)
1872 return -ENODEV;
1873
1874 /* For setting the registers, we only need to enable the ipg clock. */
1875 retval = clk_prepare_enable(sport->clk_ipg);
1876 if (retval)
1877 goto error_console;
1878
1879 if (options)
1880 uart_parse_options(options, &baud, &parity, &bits, &flow);
1881 else
1882 imx_console_get_options(sport, &baud, &parity, &bits);
1883
1884 imx_setup_ufcr(sport, TXTL_DEFAULT, RXTL_DEFAULT);
1885
1886 retval = uart_set_options(&sport->port, co, baud, parity, bits, flow);
1887
1888 clk_disable(sport->clk_ipg);
1889 if (retval) {
1890 clk_unprepare(sport->clk_ipg);
1891 goto error_console;
1892 }
1893
1894 retval = clk_prepare(sport->clk_per);
1895 if (retval)
1896 clk_disable_unprepare(sport->clk_ipg);
1897
1898 error_console:
1899 return retval;
1900 }
1901
1902 static struct uart_driver imx_reg;
1903 static struct console imx_console = {
1904 .name = DEV_NAME,
1905 .write = imx_console_write,
1906 .device = uart_console_device,
1907 .setup = imx_console_setup,
1908 .flags = CON_PRINTBUFFER,
1909 .index = -1,
1910 .data = &imx_reg,
1911 };
1912
1913 #define IMX_CONSOLE &imx_console
1914
1915 #ifdef CONFIG_OF
1916 static void imx_console_early_putchar(struct uart_port *port, int ch)
1917 {
1918 while (readl_relaxed(port->membase + IMX21_UTS) & UTS_TXFULL)
1919 cpu_relax();
1920
1921 writel_relaxed(ch, port->membase + URTX0);
1922 }
1923
1924 static void imx_console_early_write(struct console *con, const char *s,
1925 unsigned count)
1926 {
1927 struct earlycon_device *dev = con->data;
1928
1929 uart_console_write(&dev->port, s, count, imx_console_early_putchar);
1930 }
1931
1932 static int __init
1933 imx_console_early_setup(struct earlycon_device *dev, const char *opt)
1934 {
1935 if (!dev->port.membase)
1936 return -ENODEV;
1937
1938 dev->con->write = imx_console_early_write;
1939
1940 return 0;
1941 }
1942 OF_EARLYCON_DECLARE(ec_imx6q, "fsl,imx6q-uart", imx_console_early_setup);
1943 OF_EARLYCON_DECLARE(ec_imx21, "fsl,imx21-uart", imx_console_early_setup);
1944 #endif
1945
1946 #else
1947 #define IMX_CONSOLE NULL
1948 #endif
1949
1950 static struct uart_driver imx_reg = {
1951 .owner = THIS_MODULE,
1952 .driver_name = DRIVER_NAME,
1953 .dev_name = DEV_NAME,
1954 .major = SERIAL_IMX_MAJOR,
1955 .minor = MINOR_START,
1956 .nr = ARRAY_SIZE(imx_ports),
1957 .cons = IMX_CONSOLE,
1958 };
1959
1960 #ifdef CONFIG_OF
1961 /*
1962 * This function returns 1 iff pdev isn't a device instatiated by dt, 0 iff it
1963 * could successfully get all information from dt or a negative errno.
1964 */
1965 static int serial_imx_probe_dt(struct imx_port *sport,
1966 struct platform_device *pdev)
1967 {
1968 struct device_node *np = pdev->dev.of_node;
1969 int ret;
1970
1971 sport->devdata = of_device_get_match_data(&pdev->dev);
1972 if (!sport->devdata)
1973 /* no device tree device */
1974 return 1;
1975
1976 ret = of_alias_get_id(np, "serial");
1977 if (ret < 0) {
1978 dev_err(&pdev->dev, "failed to get alias id, errno %d\n", ret);
1979 return ret;
1980 }
1981 sport->port.line = ret;
1982
1983 if (of_get_property(np, "uart-has-rtscts", NULL) ||
1984 of_get_property(np, "fsl,uart-has-rtscts", NULL) /* deprecated */)
1985 sport->have_rtscts = 1;
1986
1987 if (of_get_property(np, "fsl,dte-mode", NULL))
1988 sport->dte_mode = 1;
1989
1990 return 0;
1991 }
1992 #else
1993 static inline int serial_imx_probe_dt(struct imx_port *sport,
1994 struct platform_device *pdev)
1995 {
1996 return 1;
1997 }
1998 #endif
1999
2000 static void serial_imx_probe_pdata(struct imx_port *sport,
2001 struct platform_device *pdev)
2002 {
2003 struct imxuart_platform_data *pdata = dev_get_platdata(&pdev->dev);
2004
2005 sport->port.line = pdev->id;
2006 sport->devdata = (struct imx_uart_data *) pdev->id_entry->driver_data;
2007
2008 if (!pdata)
2009 return;
2010
2011 if (pdata->flags & IMXUART_HAVE_RTSCTS)
2012 sport->have_rtscts = 1;
2013 }
2014
2015 static int serial_imx_probe(struct platform_device *pdev)
2016 {
2017 struct imx_port *sport;
2018 void __iomem *base;
2019 int ret = 0, reg;
2020 struct resource *res;
2021 int txirq, rxirq, rtsirq;
2022
2023 sport = devm_kzalloc(&pdev->dev, sizeof(*sport), GFP_KERNEL);
2024 if (!sport)
2025 return -ENOMEM;
2026
2027 ret = serial_imx_probe_dt(sport, pdev);
2028 if (ret > 0)
2029 serial_imx_probe_pdata(sport, pdev);
2030 else if (ret < 0)
2031 return ret;
2032
2033 res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
2034 base = devm_ioremap_resource(&pdev->dev, res);
2035 if (IS_ERR(base))
2036 return PTR_ERR(base);
2037
2038 rxirq = platform_get_irq(pdev, 0);
2039 txirq = platform_get_irq(pdev, 1);
2040 rtsirq = platform_get_irq(pdev, 2);
2041
2042 sport->port.dev = &pdev->dev;
2043 sport->port.mapbase = res->start;
2044 sport->port.membase = base;
2045 sport->port.type = PORT_IMX,
2046 sport->port.iotype = UPIO_MEM;
2047 sport->port.irq = rxirq;
2048 sport->port.fifosize = 32;
2049 sport->port.ops = &imx_pops;
2050 sport->port.rs485_config = imx_rs485_config;
2051 sport->port.rs485.flags =
2052 SER_RS485_RTS_ON_SEND | SER_RS485_RX_DURING_TX;
2053 sport->port.flags = UPF_BOOT_AUTOCONF;
2054 init_timer(&sport->timer);
2055 sport->timer.function = imx_timeout;
2056 sport->timer.data = (unsigned long)sport;
2057
2058 sport->gpios = mctrl_gpio_init(&sport->port, 0);
2059 if (IS_ERR(sport->gpios))
2060 return PTR_ERR(sport->gpios);
2061
2062 sport->clk_ipg = devm_clk_get(&pdev->dev, "ipg");
2063 if (IS_ERR(sport->clk_ipg)) {
2064 ret = PTR_ERR(sport->clk_ipg);
2065 dev_err(&pdev->dev, "failed to get ipg clk: %d\n", ret);
2066 return ret;
2067 }
2068
2069 sport->clk_per = devm_clk_get(&pdev->dev, "per");
2070 if (IS_ERR(sport->clk_per)) {
2071 ret = PTR_ERR(sport->clk_per);
2072 dev_err(&pdev->dev, "failed to get per clk: %d\n", ret);
2073 return ret;
2074 }
2075
2076 sport->port.uartclk = clk_get_rate(sport->clk_per);
2077
2078 /* For register access, we only need to enable the ipg clock. */
2079 ret = clk_prepare_enable(sport->clk_ipg);
2080 if (ret)
2081 return ret;
2082
2083 /* Disable interrupts before requesting them */
2084 reg = readl_relaxed(sport->port.membase + UCR1);
2085 reg &= ~(UCR1_ADEN | UCR1_TRDYEN | UCR1_IDEN | UCR1_RRDYEN |
2086 UCR1_TXMPTYEN | UCR1_RTSDEN);
2087 writel_relaxed(reg, sport->port.membase + UCR1);
2088
2089 clk_disable_unprepare(sport->clk_ipg);
2090
2091 /*
2092 * Allocate the IRQ(s) i.MX1 has three interrupts whereas later
2093 * chips only have one interrupt.
2094 */
2095 if (txirq > 0) {
2096 ret = devm_request_irq(&pdev->dev, rxirq, imx_rxint, 0,
2097 dev_name(&pdev->dev), sport);
2098 if (ret)
2099 return ret;
2100
2101 ret = devm_request_irq(&pdev->dev, txirq, imx_txint, 0,
2102 dev_name(&pdev->dev), sport);
2103 if (ret)
2104 return ret;
2105 } else {
2106 ret = devm_request_irq(&pdev->dev, rxirq, imx_int, 0,
2107 dev_name(&pdev->dev), sport);
2108 if (ret)
2109 return ret;
2110 }
2111
2112 imx_ports[sport->port.line] = sport;
2113
2114 platform_set_drvdata(pdev, sport);
2115
2116 return uart_add_one_port(&imx_reg, &sport->port);
2117 }
2118
2119 static int serial_imx_remove(struct platform_device *pdev)
2120 {
2121 struct imx_port *sport = platform_get_drvdata(pdev);
2122
2123 return uart_remove_one_port(&imx_reg, &sport->port);
2124 }
2125
2126 static void serial_imx_restore_context(struct imx_port *sport)
2127 {
2128 if (!sport->context_saved)
2129 return;
2130
2131 writel(sport->saved_reg[4], sport->port.membase + UFCR);
2132 writel(sport->saved_reg[5], sport->port.membase + UESC);
2133 writel(sport->saved_reg[6], sport->port.membase + UTIM);
2134 writel(sport->saved_reg[7], sport->port.membase + UBIR);
2135 writel(sport->saved_reg[8], sport->port.membase + UBMR);
2136 writel(sport->saved_reg[9], sport->port.membase + IMX21_UTS);
2137 writel(sport->saved_reg[0], sport->port.membase + UCR1);
2138 writel(sport->saved_reg[1] | UCR2_SRST, sport->port.membase + UCR2);
2139 writel(sport->saved_reg[2], sport->port.membase + UCR3);
2140 writel(sport->saved_reg[3], sport->port.membase + UCR4);
2141 sport->context_saved = false;
2142 }
2143
2144 static void serial_imx_save_context(struct imx_port *sport)
2145 {
2146 /* Save necessary regs */
2147 sport->saved_reg[0] = readl(sport->port.membase + UCR1);
2148 sport->saved_reg[1] = readl(sport->port.membase + UCR2);
2149 sport->saved_reg[2] = readl(sport->port.membase + UCR3);
2150 sport->saved_reg[3] = readl(sport->port.membase + UCR4);
2151 sport->saved_reg[4] = readl(sport->port.membase + UFCR);
2152 sport->saved_reg[5] = readl(sport->port.membase + UESC);
2153 sport->saved_reg[6] = readl(sport->port.membase + UTIM);
2154 sport->saved_reg[7] = readl(sport->port.membase + UBIR);
2155 sport->saved_reg[8] = readl(sport->port.membase + UBMR);
2156 sport->saved_reg[9] = readl(sport->port.membase + IMX21_UTS);
2157 sport->context_saved = true;
2158 }
2159
2160 static void serial_imx_enable_wakeup(struct imx_port *sport, bool on)
2161 {
2162 unsigned int val;
2163
2164 val = readl(sport->port.membase + UCR3);
2165 if (on)
2166 val |= UCR3_AWAKEN;
2167 else
2168 val &= ~UCR3_AWAKEN;
2169 writel(val, sport->port.membase + UCR3);
2170
2171 val = readl(sport->port.membase + UCR1);
2172 if (on)
2173 val |= UCR1_RTSDEN;
2174 else
2175 val &= ~UCR1_RTSDEN;
2176 writel(val, sport->port.membase + UCR1);
2177 }
2178
2179 static int imx_serial_port_suspend_noirq(struct device *dev)
2180 {
2181 struct platform_device *pdev = to_platform_device(dev);
2182 struct imx_port *sport = platform_get_drvdata(pdev);
2183 int ret;
2184
2185 ret = clk_enable(sport->clk_ipg);
2186 if (ret)
2187 return ret;
2188
2189 serial_imx_save_context(sport);
2190
2191 clk_disable(sport->clk_ipg);
2192
2193 return 0;
2194 }
2195
2196 static int imx_serial_port_resume_noirq(struct device *dev)
2197 {
2198 struct platform_device *pdev = to_platform_device(dev);
2199 struct imx_port *sport = platform_get_drvdata(pdev);
2200 int ret;
2201
2202 ret = clk_enable(sport->clk_ipg);
2203 if (ret)
2204 return ret;
2205
2206 serial_imx_restore_context(sport);
2207
2208 clk_disable(sport->clk_ipg);
2209
2210 return 0;
2211 }
2212
2213 static int imx_serial_port_suspend(struct device *dev)
2214 {
2215 struct platform_device *pdev = to_platform_device(dev);
2216 struct imx_port *sport = platform_get_drvdata(pdev);
2217
2218 /* enable wakeup from i.MX UART */
2219 serial_imx_enable_wakeup(sport, true);
2220
2221 uart_suspend_port(&imx_reg, &sport->port);
2222
2223 /* Needed to enable clock in suspend_noirq */
2224 return clk_prepare(sport->clk_ipg);
2225 }
2226
2227 static int imx_serial_port_resume(struct device *dev)
2228 {
2229 struct platform_device *pdev = to_platform_device(dev);
2230 struct imx_port *sport = platform_get_drvdata(pdev);
2231
2232 /* disable wakeup from i.MX UART */
2233 serial_imx_enable_wakeup(sport, false);
2234
2235 uart_resume_port(&imx_reg, &sport->port);
2236
2237 clk_unprepare(sport->clk_ipg);
2238
2239 return 0;
2240 }
2241
2242 static const struct dev_pm_ops imx_serial_port_pm_ops = {
2243 .suspend_noirq = imx_serial_port_suspend_noirq,
2244 .resume_noirq = imx_serial_port_resume_noirq,
2245 .suspend = imx_serial_port_suspend,
2246 .resume = imx_serial_port_resume,
2247 };
2248
2249 static struct platform_driver serial_imx_driver = {
2250 .probe = serial_imx_probe,
2251 .remove = serial_imx_remove,
2252
2253 .id_table = imx_uart_devtype,
2254 .driver = {
2255 .name = "imx-uart",
2256 .of_match_table = imx_uart_dt_ids,
2257 .pm = &imx_serial_port_pm_ops,
2258 },
2259 };
2260
2261 static int __init imx_serial_init(void)
2262 {
2263 int ret = uart_register_driver(&imx_reg);
2264
2265 if (ret)
2266 return ret;
2267
2268 ret = platform_driver_register(&serial_imx_driver);
2269 if (ret != 0)
2270 uart_unregister_driver(&imx_reg);
2271
2272 return ret;
2273 }
2274
2275 static void __exit imx_serial_exit(void)
2276 {
2277 platform_driver_unregister(&serial_imx_driver);
2278 uart_unregister_driver(&imx_reg);
2279 }
2280
2281 module_init(imx_serial_init);
2282 module_exit(imx_serial_exit);
2283
2284 MODULE_AUTHOR("Sascha Hauer");
2285 MODULE_DESCRIPTION("IMX generic serial port driver");
2286 MODULE_LICENSE("GPL");
2287 MODULE_ALIAS("platform:imx-uart");
Linux kernel - Deliverables
This page took 0.132014 seconds and 5 git commands to generate.