drivers/usb/Kconfig

   1 #
   2 # USB device configuration
   3 #
   4
   5 # These are unused now, remove them once they are no longer selected
   6 config USB_ARCH_HAS_OHCI
   7         bool
   8
   9 config USB_ARCH_HAS_EHCI
  10         bool
  11
  12 config USB_ARCH_HAS_XHCI
  13         bool
  14
  15 menuconfig USB_SUPPORT
  16         bool "USB support"
  17         depends on HAS_IOMEM
  18         default y
  19         ---help---
  20           This option adds core support for Universal Serial Bus (USB).
  21           You will also need drivers from the following menu to make use of it.
  22
  23 if USB_SUPPORT
  24
  25 config USB_COMMON
  26         tristate
  27         default y
  28         depends on USB || USB_GADGET
  29
  30 config USB_ARCH_HAS_HCD
  31         def_bool y
  32
  33 # ARM SA1111 chips have a non-PCI based "OHCI-compatible" USB host interface.
  34 config USB
  35         tristate "Support for Host-side USB"
  36         depends on USB_ARCH_HAS_HCD
  37         select NLS  # for UTF-8 strings
  38         ---help---
  39           Universal Serial Bus (USB) is a specification for a serial bus
  40           subsystem which offers higher speeds and more features than the
  41           traditional PC serial port.  The bus supplies power to peripherals
  42           and allows for hot swapping.  Up to 127 USB peripherals can be
  43           connected to a single USB host in a tree structure.
  44
  45           The USB host is the root of the tree, the peripherals are the
  46           leaves and the inner nodes are special USB devices called hubs.
  47           Most PCs now have USB host ports, used to connect peripherals
  48           such as scanners, keyboards, mice, modems, cameras, disks,
  49           flash memory, network links, and printers to the PC.
  50
  51           Say Y here if your computer has a host-side USB port and you want
  52           to use USB devices.  You then need to say Y to at least one of the
  53           Host Controller Driver (HCD) options below.  Choose a USB 1.1
  54           controller, such as "UHCI HCD support" or "OHCI HCD support",
  55           and "EHCI HCD (USB 2.0) support" except for older systems that
  56           do not have USB 2.0 support.  It doesn't normally hurt to select
  57           them all if you are not certain.
  58
  59           If your system has a device-side USB port, used in the peripheral
  60           side of the USB protocol, see the "USB Gadget" framework instead.
  61
  62           After choosing your HCD, then select drivers for the USB peripherals
  63           you'll be using.  You may want to check out the information provided
  64           in <file:Documentation/usb/> and especially the links given in
  65           <file:Documentation/usb/usb-help.txt>.
  66
  67           To compile this driver as a module, choose M here: the
  68           module will be called usbcore.
  69
  70 if USB
  71
  72 source "drivers/usb/core/Kconfig"
  73
  74 source "drivers/usb/mon/Kconfig"
  75
  76 source "drivers/usb/wusbcore/Kconfig"
  77
  78 source "drivers/usb/host/Kconfig"
  79
  80 source "drivers/usb/musb/Kconfig"
  81
  82 source "drivers/usb/renesas_usbhs/Kconfig"
  83
  84 source "drivers/usb/class/Kconfig"
  85
  86 source "drivers/usb/storage/Kconfig"
  87
  88 source "drivers/usb/image/Kconfig"
  89
  90 endif
  91
  92 source "drivers/usb/dwc3/Kconfig"
  93
  94 source "drivers/usb/chipidea/Kconfig"
  95
  96 comment "USB port drivers"
  97
  98 if USB
  99
 100 config USB_USS720
 101         tristate "USS720 parport driver"
 102         depends on PARPORT
 103         select PARPORT_NOT_PC
 104         ---help---
 105           This driver is for USB parallel port adapters that use the Lucent
 106           Technologies USS-720 chip. These cables are plugged into your USB
 107           port and provide USB compatibility to peripherals designed with
 108           parallel port interfaces.
 109
 110           The chip has two modes: automatic mode and manual mode. In automatic
 111           mode, it looks to the computer like a standard USB printer. Only
 112           printers may be connected to the USS-720 in this mode. The generic
 113           USB printer driver ("USB Printer support", above) may be used in
 114           that mode, and you can say N here if you want to use the chip only
 115           in this mode.
 116
 117           Manual mode is not limited to printers, any parallel port
 118           device should work. This driver utilizes manual mode.
 119           Note however that some operations are three orders of magnitude
 120           slower than on a PCI/ISA Parallel Port, so timing critical
 121           applications might not work.
 122
 123           Say Y here if you own an USS-720 USB->Parport cable and intend to
 124           connect anything other than a printer to it.
 125
 126           To compile this driver as a module, choose M here: the
 127           module will be called uss720.
 128
 129 source "drivers/usb/serial/Kconfig"
 130
 131 source "drivers/usb/misc/Kconfig"
 132
 133 source "drivers/usb/atm/Kconfig"
 134
 135 endif # USB
 136
 137 source "drivers/usb/phy/Kconfig"
 138
 139 source "drivers/usb/gadget/Kconfig"
 140
 141 endif # USB_SUPPORT