MAINTAINERS: Add phy-miphy28lp.c and phy-miphy365x.c to ARCH/STI architecture
[deliverable/linux.git] / drivers / usb / chipidea / ci_hdrc_pci.c
1 /*
2 * ci_hdrc_pci.c - MIPS USB IP core family device controller
3 *
4 * Copyright (C) 2008 Chipidea - MIPS Technologies, Inc. All rights reserved.
5 *
6 * Author: David Lopo
7 *
8 * This program is free software; you can redistribute it and/or modify
9 * it under the terms of the GNU General Public License version 2 as
10 * published by the Free Software Foundation.
11 */
12
13 #include <linux/platform_device.h>
14 #include <linux/module.h>
15 #include <linux/pci.h>
16 #include <linux/interrupt.h>
17 #include <linux/usb/gadget.h>
18 #include <linux/usb/chipidea.h>
19
20 /* driver name */
21 #define UDC_DRIVER_NAME "ci_hdrc_pci"
22
23 /******************************************************************************
24 * PCI block
25 *****************************************************************************/
26 static struct ci_hdrc_platform_data pci_platdata = {
27 .name = UDC_DRIVER_NAME,
28 .capoffset = DEF_CAPOFFSET,
29 };
30
31 static struct ci_hdrc_platform_data langwell_pci_platdata = {
32 .name = UDC_DRIVER_NAME,
33 .capoffset = 0,
34 };
35
36 static struct ci_hdrc_platform_data penwell_pci_platdata = {
37 .name = UDC_DRIVER_NAME,
38 .capoffset = 0,
39 .power_budget = 200,
40 };
41
42 /**
43 * ci_hdrc_pci_probe: PCI probe
44 * @pdev: USB device controller being probed
45 * @id: PCI hotplug ID connecting controller to UDC framework
46 *
47 * This function returns an error code
48 * Allocates basic PCI resources for this USB device controller, and then
49 * invokes the udc_probe() method to start the UDC associated with it
50 */
51 static int ci_hdrc_pci_probe(struct pci_dev *pdev,
52 const struct pci_device_id *id)
53 {
54 struct ci_hdrc_platform_data *platdata = (void *)id->driver_data;
55 struct platform_device *plat_ci;
56 struct resource res[3];
57 int retval = 0, nres = 2;
58
59 if (!platdata) {
60 dev_err(&pdev->dev, "device doesn't provide driver data\n");
61 return -ENODEV;
62 }
63
64 retval = pcim_enable_device(pdev);
65 if (retval)
66 return retval;
67
68 if (!pdev->irq) {
69 dev_err(&pdev->dev, "No IRQ, check BIOS/PCI setup!");
70 return -ENODEV;
71 }
72
73 pci_set_master(pdev);
74 pci_try_set_mwi(pdev);
75
76 memset(res, 0, sizeof(res));
77 res[0].start = pci_resource_start(pdev, 0);
78 res[0].end = pci_resource_end(pdev, 0);
79 res[0].flags = IORESOURCE_MEM;
80 res[1].start = pdev->irq;
81 res[1].flags = IORESOURCE_IRQ;
82
83 plat_ci = ci_hdrc_add_device(&pdev->dev, res, nres, platdata);
84 if (IS_ERR(plat_ci)) {
85 dev_err(&pdev->dev, "ci_hdrc_add_device failed!\n");
86 return PTR_ERR(plat_ci);
87 }
88
89 pci_set_drvdata(pdev, plat_ci);
90
91 return 0;
92 }
93
94 /**
95 * ci_hdrc_pci_remove: PCI remove
96 * @pdev: USB Device Controller being removed
97 *
98 * Reverses the effect of ci_hdrc_pci_probe(),
99 * first invoking the udc_remove() and then releases
100 * all PCI resources allocated for this USB device controller
101 */
102 static void ci_hdrc_pci_remove(struct pci_dev *pdev)
103 {
104 struct platform_device *plat_ci = pci_get_drvdata(pdev);
105
106 ci_hdrc_remove_device(plat_ci);
107 }
108
109 /**
110 * PCI device table
111 * PCI device structure
112 *
113 * Check "pci.h" for details
114 *
115 * Note: ehci-pci driver may try to probe the device first. You have to add an
116 * ID to the bypass_pci_id_table in ehci-pci driver to prevent this.
117 */
118 static const struct pci_device_id ci_hdrc_pci_id_table[] = {
119 {
120 PCI_DEVICE(0x153F, 0x1004),
121 .driver_data = (kernel_ulong_t)&pci_platdata,
122 },
123 {
124 PCI_DEVICE(0x153F, 0x1006),
125 .driver_data = (kernel_ulong_t)&pci_platdata,
126 },
127 {
128 PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x0811),
129 .driver_data = (kernel_ulong_t)&langwell_pci_platdata,
130 },
131 {
132 PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x0829),
133 .driver_data = (kernel_ulong_t)&penwell_pci_platdata,
134 },
135 {
136 /* Intel Clovertrail */
137 PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0xe006),
138 .driver_data = (kernel_ulong_t)&penwell_pci_platdata,
139 },
140 { 0 } /* end: all zeroes */
141 };
142 MODULE_DEVICE_TABLE(pci, ci_hdrc_pci_id_table);
143
144 static struct pci_driver ci_hdrc_pci_driver = {
145 .name = UDC_DRIVER_NAME,
146 .id_table = ci_hdrc_pci_id_table,
147 .probe = ci_hdrc_pci_probe,
148 .remove = ci_hdrc_pci_remove,
149 };
150
151 module_pci_driver(ci_hdrc_pci_driver);
152
153 MODULE_AUTHOR("MIPS - David Lopo <dlopo@chipidea.mips.com>");
154 MODULE_DESCRIPTION("MIPS CI13XXX USB Peripheral Controller");
155 MODULE_LICENSE("GPL");
156 MODULE_VERSION("June 2008");
157 MODULE_ALIAS("platform:ci13xxx_pci");
This page took 0.035523 seconds and 5 git commands to generate.