drivers/usb/core/hcd-pci.c

   1 /*
   2  * (C) Copyright David Brownell 2000-2002
   3  *
   4  * This program is free software; you can redistribute it and/or modify it
   5  * under the terms of the GNU General Public License as published by the
   6  * Free Software Foundation; either version 2 of the License, or (at your
   7  * option) any later version.
   8  *
   9  * This program is distributed in the hope that it will be useful, but
  10  * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
  11  * or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
  12  * for more details.
  13  *
  14  * You should have received a copy of the GNU General Public License
  15  * along with this program; if not, write to the Free Software Foundation,
  16  * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  17  */
  18
  19 #include <linux/kernel.h>
  20 #include <linux/module.h>
  21 #include <linux/pci.h>
  22 #include <linux/usb.h>
  23 #include <linux/usb/hcd.h>
  24
  25 #include <asm/io.h>
  26 #include <asm/irq.h>
  27
  28 #ifdef CONFIG_PPC_PMAC
  29 #include <asm/machdep.h>
  30 #include <asm/pmac_feature.h>
  31 #include <asm/pci-bridge.h>
  32 #include <asm/prom.h>
  33 #endif
  34
  35 #include "usb.h"
  36
  37
  38 /* PCI-based HCs are common, but plenty of non-PCI HCs are used too */
  39
  40 #ifdef CONFIG_PM_SLEEP
  41
  42 /* Coordinate handoffs between EHCI and companion controllers
  43  * during system resume
  44  */
  45
  46 static DEFINE_MUTEX(companions_mutex);
  47
  48 #define CL_UHCI         PCI_CLASS_SERIAL_USB_UHCI
  49 #define CL_OHCI         PCI_CLASS_SERIAL_USB_OHCI
  50 #define CL_EHCI         PCI_CLASS_SERIAL_USB_EHCI
  51
  52 enum companion_action {
  53         SET_HS_COMPANION, CLEAR_HS_COMPANION, WAIT_FOR_COMPANIONS
  54 };
  55
  56 static void companion_common(struct pci_dev *pdev, struct usb_hcd *hcd,
  57                 enum companion_action action)
  58 {
  59         struct pci_dev          *companion;
  60         struct usb_hcd          *companion_hcd;
  61         unsigned int            slot = PCI_SLOT(pdev->devfn);
  62
  63         /* Iterate through other PCI functions in the same slot.
  64          * If pdev is OHCI or UHCI then we are looking for EHCI, and
  65          * vice versa.
  66          */
  67         companion = NULL;
  68         for_each_pci_dev(companion) {
  69                 if (companion->bus != pdev->bus ||
  70                                 PCI_SLOT(companion->devfn) != slot)
  71                         continue;
  72
  73                 companion_hcd = pci_get_drvdata(companion);
  74                 if (!companion_hcd)
  75                         continue;
  76
  77                 /* For SET_HS_COMPANION, store a pointer to the EHCI bus in
  78                  * the OHCI/UHCI companion bus structure.
  79                  * For CLEAR_HS_COMPANION, clear the pointer to the EHCI bus
  80                  * in the OHCI/UHCI companion bus structure.
  81                  * For WAIT_FOR_COMPANIONS, wait until the OHCI/UHCI
  82                  * companion controllers have fully resumed.
  83                  */
  84
  85                 if ((pdev->class == CL_OHCI || pdev->class == CL_UHCI) &&
  86                                 companion->class == CL_EHCI) {
  87                         /* action must be SET_HS_COMPANION */
  88                         dev_dbg(&companion->dev, "HS companion for %s\n",
  89                                         dev_name(&pdev->dev));
  90                         hcd->self.hs_companion = &companion_hcd->self;
  91
  92                 } else if (pdev->class == CL_EHCI &&
  93                                 (companion->class == CL_OHCI ||
  94                                 companion->class == CL_UHCI)) {
  95                         switch (action) {
  96                         case SET_HS_COMPANION:
  97                                 dev_dbg(&pdev->dev, "HS companion for %s\n",
  98                                                 dev_name(&companion->dev));
  99                                 companion_hcd->self.hs_companion = &hcd->self;
 100                                 break;
 101                         case CLEAR_HS_COMPANION:
 102                                 companion_hcd->self.hs_companion = NULL;
 103                                 break;
 104                         case WAIT_FOR_COMPANIONS:
 105                                 device_pm_wait_for_dev(&pdev->dev,
 106                                                 &companion->dev);
 107                                 break;
 108                         }
 109                 }
 110         }
 111 }
 112
 113 static void set_hs_companion(struct pci_dev *pdev, struct usb_hcd *hcd)
 114 {
 115         mutex_lock(&companions_mutex);
 116         dev_set_drvdata(&pdev->dev, hcd);
 117         companion_common(pdev, hcd, SET_HS_COMPANION);
 118         mutex_unlock(&companions_mutex);
 119 }
 120
 121 static void clear_hs_companion(struct pci_dev *pdev, struct usb_hcd *hcd)
 122 {
 123         mutex_lock(&companions_mutex);
 124         dev_set_drvdata(&pdev->dev, NULL);
 125
 126         /* If pdev is OHCI or UHCI, just clear its hs_companion pointer */
 127         if (pdev->class == CL_OHCI || pdev->class == CL_UHCI)
 128                 hcd->self.hs_companion = NULL;
 129
 130         /* Otherwise search for companion buses and clear their pointers */
 131         else
 132                 companion_common(pdev, hcd, CLEAR_HS_COMPANION);
 133         mutex_unlock(&companions_mutex);
 134 }
 135
 136 static void wait_for_companions(struct pci_dev *pdev, struct usb_hcd *hcd)
 137 {
 138         /* Only EHCI controllers need to wait.
 139          * No locking is needed because a controller cannot be resumed
 140          * while one of its companions is getting unbound.
 141          */
 142         if (pdev->class == CL_EHCI)
 143                 companion_common(pdev, hcd, WAIT_FOR_COMPANIONS);
 144 }
 145
 146 #else /* !CONFIG_PM_SLEEP */
 147
 148 static inline void set_hs_companion(struct pci_dev *d, struct usb_hcd *h) {}
 149 static inline void clear_hs_companion(struct pci_dev *d, struct usb_hcd *h) {}
 150 static inline void wait_for_companions(struct pci_dev *d, struct usb_hcd *h) {}
 151
 152 #endif /* !CONFIG_PM_SLEEP */
 153
 154 /*-------------------------------------------------------------------------*/
 155
 156 /* configure so an HC device and id are always provided */
 157 /* always called with process context; sleeping is OK */
 158
 159 /**
 160  * usb_hcd_pci_probe - initialize PCI-based HCDs
 161  * @dev: USB Host Controller being probed
 162  * @id: pci hotplug id connecting controller to HCD framework
 163  * Context: !in_interrupt()
 164  *
 165  * Allocates basic PCI resources for this USB host controller, and
 166  * then invokes the start() method for the HCD associated with it
 167  * through the hotplug entry's driver_data.
 168  *
 169  * Store this function in the HCD's struct pci_driver as probe().
 170  */
 171 int usb_hcd_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
 172 {
 173         struct hc_driver        *driver;
 174         struct usb_hcd          *hcd;
 175         int                     retval;
 176
 177         if (usb_disabled())
 178                 return -ENODEV;
 179
 180         if (!id)
 181                 return -EINVAL;
 182         driver = (struct hc_driver *)id->driver_data;
 183         if (!driver)
 184                 return -EINVAL;
 185
 186         if (pci_enable_device(dev) < 0)
 187                 return -ENODEV;
 188         dev->current_state = PCI_D0;
 189
 190         if (!dev->irq) {
 191                 dev_err(&dev->dev,
 192                         "Found HC with no IRQ.  Check BIOS/PCI %s setup!\n",
 193                         pci_name(dev));
 194                 retval = -ENODEV;
 195                 goto err1;
 196         }
 197
 198         hcd = usb_create_hcd(driver, &dev->dev, pci_name(dev));
 199         if (!hcd) {
 200                 retval = -ENOMEM;
 201                 goto err1;
 202         }
 203
 204         if (driver->flags & HCD_MEMORY) {
 205                 /* EHCI, OHCI */
 206                 hcd->rsrc_start = pci_resource_start(dev, 0);
 207                 hcd->rsrc_len = pci_resource_len(dev, 0);
 208                 if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len,
 209                                 driver->description)) {
 210                         dev_dbg(&dev->dev, "controller already in use\n");
 211                         retval = -EBUSY;
 212                         goto err2;
 213                 }
 214                 hcd->regs = ioremap_nocache(hcd->rsrc_start, hcd->rsrc_len);
 215                 if (hcd->regs == NULL) {
 216                         dev_dbg(&dev->dev, "error mapping memory\n");
 217                         retval = -EFAULT;
 218                         goto err3;
 219                 }
 220
 221         } else {
 222                 /* UHCI */
 223                 int     region;
 224
 225                 for (region = 0; region < PCI_ROM_RESOURCE; region++) {
 226                         if (!(pci_resource_flags(dev, region) &
 227                                         IORESOURCE_IO))
 228                                 continue;
 229
 230                         hcd->rsrc_start = pci_resource_start(dev, region);
 231                         hcd->rsrc_len = pci_resource_len(dev, region);
 232                         if (request_region(hcd->rsrc_start, hcd->rsrc_len,
 233                                         driver->description))
 234                                 break;
 235                 }
 236                 if (region == PCI_ROM_RESOURCE) {
 237                         dev_dbg(&dev->dev, "no i/o regions available\n");
 238                         retval = -EBUSY;
 239                         goto err2;
 240                 }
 241         }
 242
 243         pci_set_master(dev);
 244
 245         retval = usb_add_hcd(hcd, dev->irq, IRQF_DISABLED | IRQF_SHARED);
 246         if (retval != 0)
 247                 goto err4;
 248         set_hs_companion(dev, hcd);
 249
 250         if (pci_dev_run_wake(dev))
 251                 pm_runtime_put_noidle(&dev->dev);
 252         return retval;
 253
 254  err4:
 255         if (driver->flags & HCD_MEMORY) {
 256                 iounmap(hcd->regs);
 257  err3:
 258                 release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
 259         } else
 260                 release_region(hcd->rsrc_start, hcd->rsrc_len);
 261  err2:
 262         clear_hs_companion(dev, hcd);
 263         usb_put_hcd(hcd);
 264  err1:
 265         pci_disable_device(dev);
 266         dev_err(&dev->dev, "init %s fail, %d\n", pci_name(dev), retval);
 267         return retval;
 268 }
 269 EXPORT_SYMBOL_GPL(usb_hcd_pci_probe);
 270
 271
 272 /* may be called without controller electrically present */
 273 /* may be called with controller, bus, and devices active */
 274
 275 /**
 276  * usb_hcd_pci_remove - shutdown processing for PCI-based HCDs
 277  * @dev: USB Host Controller being removed
 278  * Context: !in_interrupt()
 279  *
 280  * Reverses the effect of usb_hcd_pci_probe(), first invoking
 281  * the HCD's stop() method.  It is always called from a thread
 282  * context, normally "rmmod", "apmd", or something similar.
 283  *
 284  * Store this function in the HCD's struct pci_driver as remove().
 285  */
 286 void usb_hcd_pci_remove(struct pci_dev *dev)
 287 {
 288         struct usb_hcd          *hcd;
 289
 290         hcd = pci_get_drvdata(dev);
 291         if (!hcd)
 292                 return;
 293
 294         if (pci_dev_run_wake(dev))
 295                 pm_runtime_get_noresume(&dev->dev);
 296
 297         /* Fake an interrupt request in order to give the driver a chance
 298          * to test whether the controller hardware has been removed (e.g.,
 299          * cardbus physical eject).
 300          */
 301         local_irq_disable();
 302         usb_hcd_irq(0, hcd);
 303         local_irq_enable();
 304
 305         usb_remove_hcd(hcd);
 306         if (hcd->driver->flags & HCD_MEMORY) {
 307                 iounmap(hcd->regs);
 308                 release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
 309         } else {
 310                 release_region(hcd->rsrc_start, hcd->rsrc_len);
 311         }
 312         clear_hs_companion(dev, hcd);
 313         usb_put_hcd(hcd);
 314         pci_disable_device(dev);
 315 }
 316 EXPORT_SYMBOL_GPL(usb_hcd_pci_remove);
 317
 318 /**
 319  * usb_hcd_pci_shutdown - shutdown host controller
 320  * @dev: USB Host Controller being shutdown
 321  */
 322 void usb_hcd_pci_shutdown(struct pci_dev *dev)
 323 {
 324         struct usb_hcd          *hcd;
 325
 326         hcd = pci_get_drvdata(dev);
 327         if (!hcd)
 328                 return;
 329
 330         if (test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags) &&
 331                         hcd->driver->shutdown) {
 332                 hcd->driver->shutdown(hcd);
 333                 pci_disable_device(dev);
 334         }
 335 }
 336 EXPORT_SYMBOL_GPL(usb_hcd_pci_shutdown);
 337
 338 #ifdef  CONFIG_PM_OPS
 339
 340 #ifdef  CONFIG_PPC_PMAC
 341 static void powermac_set_asic(struct pci_dev *pci_dev, int enable)
 342 {
 343         /* Enanble or disable ASIC clocks for USB */
 344         if (machine_is(powermac)) {
 345                 struct device_node      *of_node;
 346
 347                 of_node = pci_device_to_OF_node(pci_dev);
 348                 if (of_node)
 349                         pmac_call_feature(PMAC_FTR_USB_ENABLE,
 350                                         of_node, 0, enable);
 351         }
 352 }
 353
 354 #else
 355
 356 static inline void powermac_set_asic(struct pci_dev *pci_dev, int enable)
 357 {}
 358
 359 #endif  /* CONFIG_PPC_PMAC */
 360
 361 static int check_root_hub_suspended(struct device *dev)
 362 {
 363         struct pci_dev          *pci_dev = to_pci_dev(dev);
 364         struct usb_hcd          *hcd = pci_get_drvdata(pci_dev);
 365
 366         if (!(hcd->state == HC_STATE_SUSPENDED ||
 367                         hcd->state == HC_STATE_HALT)) {
 368                 dev_warn(dev, "Root hub is not suspended\n");
 369                 return -EBUSY;
 370         }
 371         return 0;
 372 }
 373
 374 static int suspend_common(struct device *dev, bool do_wakeup)
 375 {
 376         struct pci_dev          *pci_dev = to_pci_dev(dev);
 377         struct usb_hcd          *hcd = pci_get_drvdata(pci_dev);
 378         int                     retval;
 379
 380         /* Root hub suspend should have stopped all downstream traffic,
 381          * and all bus master traffic.  And done so for both the interface
 382          * and the stub usb_device (which we check here).  But maybe it
 383          * didn't; writing sysfs power/state files ignores such rules...
 384          */
 385         retval = check_root_hub_suspended(dev);
 386         if (retval)
 387                 return retval;
 388
 389         if (hcd->driver->pci_suspend) {
 390                 /* Optimization: Don't suspend if a root-hub wakeup is
 391                  * pending and it would cause the HCD to wake up anyway.
 392                  */
 393                 if (do_wakeup && HCD_WAKEUP_PENDING(hcd))
 394                         return -EBUSY;
 395                 retval = hcd->driver->pci_suspend(hcd, do_wakeup);
 396                 suspend_report_result(hcd->driver->pci_suspend, retval);
 397
 398                 /* Check again in case wakeup raced with pci_suspend */
 399                 if (retval == 0 && do_wakeup && HCD_WAKEUP_PENDING(hcd)) {
 400                         if (hcd->driver->pci_resume)
 401                                 hcd->driver->pci_resume(hcd, false);
 402                         retval = -EBUSY;
 403                 }
 404                 if (retval)
 405                         return retval;
 406         }
 407
 408         /* If MSI-X is enabled, the driver will have synchronized all vectors
 409          * in pci_suspend(). If MSI or legacy PCI is enabled, that will be
 410          * synchronized here.
 411          */
 412         if (!hcd->msix_enabled)
 413                 synchronize_irq(pci_dev->irq);
 414
 415         /* Downstream ports from this root hub should already be quiesced, so
 416          * there will be no DMA activity.  Now we can shut down the upstream
 417          * link (except maybe for PME# resume signaling).  We'll enter a
 418          * low power state during suspend_noirq, if the hardware allows.
 419          */
 420         pci_disable_device(pci_dev);
 421         return retval;
 422 }
 423
 424 static int resume_common(struct device *dev, int event)
 425 {
 426         struct pci_dev          *pci_dev = to_pci_dev(dev);
 427         struct usb_hcd          *hcd = pci_get_drvdata(pci_dev);
 428         int                     retval;
 429
 430         if (hcd->state != HC_STATE_SUSPENDED) {
 431                 dev_dbg(dev, "can't resume, not suspended!\n");
 432                 return 0;
 433         }
 434
 435         retval = pci_enable_device(pci_dev);
 436         if (retval < 0) {
 437                 dev_err(dev, "can't re-enable after resume, %d!\n", retval);
 438                 return retval;
 439         }
 440
 441         pci_set_master(pci_dev);
 442
 443         clear_bit(HCD_FLAG_SAW_IRQ, &hcd->flags);
 444
 445         if (hcd->driver->pci_resume) {
 446                 if (event != PM_EVENT_AUTO_RESUME)
 447                         wait_for_companions(pci_dev, hcd);
 448
 449                 retval = hcd->driver->pci_resume(hcd,
 450                                 event == PM_EVENT_RESTORE);
 451                 if (retval) {
 452                         dev_err(dev, "PCI post-resume error %d!\n", retval);
 453                         usb_hc_died(hcd);
 454                 }
 455         }
 456         return retval;
 457 }
 458
 459 #ifdef  CONFIG_PM_SLEEP
 460
 461 static int hcd_pci_suspend(struct device *dev)
 462 {
 463         return suspend_common(dev, device_may_wakeup(dev));
 464 }
 465
 466 static int hcd_pci_suspend_noirq(struct device *dev)
 467 {
 468         struct pci_dev          *pci_dev = to_pci_dev(dev);
 469         struct usb_hcd          *hcd = pci_get_drvdata(pci_dev);
 470         int                     retval;
 471
 472         retval = check_root_hub_suspended(dev);
 473         if (retval)
 474                 return retval;
 475
 476         pci_save_state(pci_dev);
 477
 478         /* If the root hub is HALTed rather than SUSPENDed,
 479          * disallow remote wakeup.
 480          */
 481         if (hcd->state == HC_STATE_HALT)
 482                 device_set_wakeup_enable(dev, 0);
 483         dev_dbg(dev, "wakeup: %d\n", device_may_wakeup(dev));
 484
 485         /* Possibly enable remote wakeup,
 486          * choose the appropriate low-power state, and go to that state.
 487          */
 488         retval = pci_prepare_to_sleep(pci_dev);
 489         if (retval == -EIO) {           /* Low-power not supported */
 490                 dev_dbg(dev, "--> PCI D0 legacy\n");
 491                 retval = 0;
 492         } else if (retval == 0) {
 493                 dev_dbg(dev, "--> PCI %s\n",
 494                                 pci_power_name(pci_dev->current_state));
 495         } else {
 496                 suspend_report_result(pci_prepare_to_sleep, retval);
 497                 return retval;
 498         }
 499
 500         powermac_set_asic(pci_dev, 0);
 501         return retval;
 502 }
 503
 504 static int hcd_pci_resume_noirq(struct device *dev)
 505 {
 506         struct pci_dev          *pci_dev = to_pci_dev(dev);
 507
 508         powermac_set_asic(pci_dev, 1);
 509
 510         /* Go back to D0 and disable remote wakeup */
 511         pci_back_from_sleep(pci_dev);
 512         return 0;
 513 }
 514
 515 static int hcd_pci_resume(struct device *dev)
 516 {
 517         return resume_common(dev, PM_EVENT_RESUME);
 518 }
 519
 520 static int hcd_pci_restore(struct device *dev)
 521 {
 522         return resume_common(dev, PM_EVENT_RESTORE);
 523 }
 524
 525 #else
 526
 527 #define hcd_pci_suspend         NULL
 528 #define hcd_pci_suspend_noirq   NULL
 529 #define hcd_pci_resume_noirq    NULL
 530 #define hcd_pci_resume          NULL
 531 #define hcd_pci_restore         NULL
 532
 533 #endif  /* CONFIG_PM_SLEEP */
 534
 535 #ifdef  CONFIG_PM_RUNTIME
 536
 537 static int hcd_pci_runtime_suspend(struct device *dev)
 538 {
 539         int     retval;
 540
 541         retval = suspend_common(dev, true);
 542         if (retval == 0)
 543                 powermac_set_asic(to_pci_dev(dev), 0);
 544         dev_dbg(dev, "hcd_pci_runtime_suspend: %d\n", retval);
 545         return retval;
 546 }
 547
 548 static int hcd_pci_runtime_resume(struct device *dev)
 549 {
 550         int     retval;
 551
 552         powermac_set_asic(to_pci_dev(dev), 1);
 553         retval = resume_common(dev, PM_EVENT_AUTO_RESUME);
 554         dev_dbg(dev, "hcd_pci_runtime_resume: %d\n", retval);
 555         return retval;
 556 }
 557
 558 #else
 559
 560 #define hcd_pci_runtime_suspend NULL
 561 #define hcd_pci_runtime_resume  NULL
 562
 563 #endif  /* CONFIG_PM_RUNTIME */
 564
 565 const struct dev_pm_ops usb_hcd_pci_pm_ops = {
 566         .suspend        = hcd_pci_suspend,
 567         .suspend_noirq  = hcd_pci_suspend_noirq,
 568         .resume_noirq   = hcd_pci_resume_noirq,
 569         .resume         = hcd_pci_resume,
 570         .freeze         = check_root_hub_suspended,
 571         .freeze_noirq   = check_root_hub_suspended,
 572         .thaw_noirq     = NULL,
 573         .thaw           = NULL,
 574         .poweroff       = hcd_pci_suspend,
 575         .poweroff_noirq = hcd_pci_suspend_noirq,
 576         .restore_noirq  = hcd_pci_resume_noirq,
 577         .restore        = hcd_pci_restore,
 578         .runtime_suspend = hcd_pci_runtime_suspend,
 579         .runtime_resume = hcd_pci_runtime_resume,
 580 };
 581 EXPORT_SYMBOL_GPL(usb_hcd_pci_pm_ops);
 582
 583 #endif  /* CONFIG_PM_OPS */