2 * dwc3-pci.c - PCI Specific glue layer
4 * Copyright (C) 2010-2011 Texas Instruments Incorporated - http://www.ti.com
6 * Authors: Felipe Balbi <balbi@ti.com>,
7 * Sebastian Andrzej Siewior <bigeasy@linutronix.de>
9 * This program is free software: you can redistribute it and/or modify
10 * it under the terms of the GNU General Public License version 2 of
11 * the License as published by the Free Software Foundation.
13 * This program is distributed in the hope that it will be useful,
14 * but WITHOUT ANY WARRANTY; without even the implied warranty of
15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16 * GNU General Public License for more details.
19 #include <linux/kernel.h>
20 #include <linux/module.h>
21 #include <linux/slab.h>
22 #include <linux/pci.h>
23 #include <linux/platform_device.h>
25 #include <linux/usb/otg.h>
26 #include <linux/usb/usb_phy_generic.h>
28 /* FIXME define these in <linux/pci_ids.h> */
29 #define PCI_VENDOR_ID_SYNOPSYS 0x16c3
30 #define PCI_DEVICE_ID_SYNOPSYS_HAPSUSB3 0xabcd
31 #define PCI_DEVICE_ID_INTEL_BYT 0x0f37
32 #define PCI_DEVICE_ID_INTEL_MRFLD 0x119e
33 #define PCI_DEVICE_ID_INTEL_BSW 0x22B7
37 struct platform_device
*dwc3
;
38 struct platform_device
*usb2_phy
;
39 struct platform_device
*usb3_phy
;
42 static int dwc3_pci_register_phys(struct dwc3_pci
*glue
)
44 struct usb_phy_generic_platform_data pdata
;
45 struct platform_device
*pdev
;
48 memset(&pdata
, 0x00, sizeof(pdata
));
50 pdev
= platform_device_alloc("usb_phy_generic", 0);
54 glue
->usb2_phy
= pdev
;
55 pdata
.type
= USB_PHY_TYPE_USB2
;
56 pdata
.gpio_reset
= -1;
58 ret
= platform_device_add_data(glue
->usb2_phy
, &pdata
, sizeof(pdata
));
62 pdev
= platform_device_alloc("usb_phy_generic", 1);
68 glue
->usb3_phy
= pdev
;
69 pdata
.type
= USB_PHY_TYPE_USB3
;
71 ret
= platform_device_add_data(glue
->usb3_phy
, &pdata
, sizeof(pdata
));
75 ret
= platform_device_add(glue
->usb2_phy
);
79 ret
= platform_device_add(glue
->usb3_phy
);
86 platform_device_del(glue
->usb2_phy
);
89 platform_device_put(glue
->usb3_phy
);
92 platform_device_put(glue
->usb2_phy
);
97 static int dwc3_pci_probe(struct pci_dev
*pci
,
98 const struct pci_device_id
*id
)
100 struct resource res
[2];
101 struct platform_device
*dwc3
;
102 struct dwc3_pci
*glue
;
104 struct device
*dev
= &pci
->dev
;
106 glue
= devm_kzalloc(dev
, sizeof(*glue
), GFP_KERNEL
);
112 ret
= pcim_enable_device(pci
);
114 dev_err(dev
, "failed to enable pci device\n");
120 ret
= dwc3_pci_register_phys(glue
);
122 dev_err(dev
, "couldn't register PHYs\n");
126 dwc3
= platform_device_alloc("dwc3", PLATFORM_DEVID_AUTO
);
128 dev_err(dev
, "couldn't allocate dwc3 device\n");
132 memset(res
, 0x00, sizeof(struct resource
) * ARRAY_SIZE(res
));
134 res
[0].start
= pci_resource_start(pci
, 0);
135 res
[0].end
= pci_resource_end(pci
, 0);
136 res
[0].name
= "dwc_usb3";
137 res
[0].flags
= IORESOURCE_MEM
;
139 res
[1].start
= pci
->irq
;
140 res
[1].name
= "dwc_usb3";
141 res
[1].flags
= IORESOURCE_IRQ
;
143 ret
= platform_device_add_resources(dwc3
, res
, ARRAY_SIZE(res
));
145 dev_err(dev
, "couldn't add resources to dwc3 device\n");
149 pci_set_drvdata(pci
, glue
);
151 dma_set_coherent_mask(&dwc3
->dev
, dev
->coherent_dma_mask
);
153 dwc3
->dev
.dma_mask
= dev
->dma_mask
;
154 dwc3
->dev
.dma_parms
= dev
->dma_parms
;
155 dwc3
->dev
.parent
= dev
;
158 ret
= platform_device_add(dwc3
);
160 dev_err(dev
, "failed to register dwc3 device\n");
167 platform_device_put(dwc3
);
171 static void dwc3_pci_remove(struct pci_dev
*pci
)
173 struct dwc3_pci
*glue
= pci_get_drvdata(pci
);
175 platform_device_unregister(glue
->dwc3
);
176 platform_device_unregister(glue
->usb2_phy
);
177 platform_device_unregister(glue
->usb3_phy
);
180 static const struct pci_device_id dwc3_pci_id_table
[] = {
182 PCI_DEVICE(PCI_VENDOR_ID_SYNOPSYS
,
183 PCI_DEVICE_ID_SYNOPSYS_HAPSUSB3
),
185 { PCI_DEVICE(PCI_VENDOR_ID_INTEL
, PCI_DEVICE_ID_INTEL_BSW
), },
186 { PCI_DEVICE(PCI_VENDOR_ID_INTEL
, PCI_DEVICE_ID_INTEL_BYT
), },
187 { PCI_DEVICE(PCI_VENDOR_ID_INTEL
, PCI_DEVICE_ID_INTEL_MRFLD
), },
188 { } /* Terminating Entry */
190 MODULE_DEVICE_TABLE(pci
, dwc3_pci_id_table
);
192 #ifdef CONFIG_PM_SLEEP
193 static int dwc3_pci_suspend(struct device
*dev
)
195 struct pci_dev
*pci
= to_pci_dev(dev
);
197 pci_disable_device(pci
);
202 static int dwc3_pci_resume(struct device
*dev
)
204 struct pci_dev
*pci
= to_pci_dev(dev
);
207 ret
= pci_enable_device(pci
);
209 dev_err(dev
, "can't re-enable device --> %d\n", ret
);
217 #endif /* CONFIG_PM_SLEEP */
219 static const struct dev_pm_ops dwc3_pci_dev_pm_ops
= {
220 SET_SYSTEM_SLEEP_PM_OPS(dwc3_pci_suspend
, dwc3_pci_resume
)
223 static struct pci_driver dwc3_pci_driver
= {
225 .id_table
= dwc3_pci_id_table
,
226 .probe
= dwc3_pci_probe
,
227 .remove
= dwc3_pci_remove
,
229 .pm
= &dwc3_pci_dev_pm_ops
,
233 MODULE_AUTHOR("Felipe Balbi <balbi@ti.com>");
234 MODULE_LICENSE("GPL v2");
235 MODULE_DESCRIPTION("DesignWare USB3 PCI Glue Layer");
237 module_pci_driver(dwc3_pci_driver
);