2 # USB Gadget support on a system involves
3 # (a) a peripheral controller, and
4 # (b) the gadget driver using it.
6 # NOTE: Gadget support ** DOES NOT ** depend on host-side CONFIG_USB !!
8 # - Host systems (like PCs) need CONFIG_USB (with "A" jacks).
9 # - Peripherals (like PDAs) need CONFIG_USB_GADGET (with "B" jacks).
10 # - Some systems have both kinds of controllers.
12 # With help from a special transceiver and a "Mini-AB" jack, systems with
13 # both kinds of controller can also support "USB On-the-Go" (CONFIG_USB_OTG).
17 tristate "USB Gadget Support"
20 USB is a master/slave protocol, organized with one master
21 host (such as a PC) controlling up to 127 peripheral devices.
22 The USB hardware is asymmetric, which makes it easier to set up:
23 you can't connect a "to-the-host" connector to a peripheral.
25 Linux can run in the host, or in the peripheral. In both cases
26 you need a low level bus controller driver, and some software
27 talking to it. Peripheral controllers are often discrete silicon,
28 or are integrated with the CPU in a microcontroller. The more
29 familiar host side controllers have names like "EHCI", "OHCI",
30 or "UHCI", and are usually integrated into southbridges on PC
33 Enable this configuration option if you want to run Linux inside
34 a USB peripheral device. Configure one hardware driver for your
35 peripheral/device side bus controller, and a "gadget driver" for
36 your peripheral protocol. (If you use modular gadget drivers,
37 you may configure more than one.)
39 If in doubt, say "N" and don't enable these drivers; most people
40 don't have this kind of hardware (except maybe inside Linux PDAs).
42 For more information, see <http://www.linux-usb.org/gadget> and
43 the kernel DocBook documentation for this API.
47 config USB_GADGET_DEBUG
48 boolean "Debugging messages (DEVELOPMENT)"
49 depends on DEBUG_KERNEL
51 Many controller and gadget drivers will print some debugging
52 messages if you use this option to ask for those messages.
54 Avoid enabling these messages, even if you're actively
55 debugging such a driver. Many drivers will emit so many
56 messages that the driver timings are affected, which will
57 either create new failure modes or remove the one you're
58 trying to track down. Never enable these messages for a
61 config USB_GADGET_DEBUG_FILES
62 boolean "Debugging information files (DEVELOPMENT)"
65 Some of the drivers in the "gadget" framework can expose
66 debugging information in files such as /proc/driver/udc
67 (for a peripheral controller). The information in these
68 files may help when you're troubleshooting or bringing up a
69 driver on a new board. Enable these files by choosing "Y"
70 here. If in doubt, or to conserve kernel memory, say "N".
72 config USB_GADGET_DEBUG_FS
73 boolean "Debugging information files in debugfs (DEVELOPMENT)"
76 Some of the drivers in the "gadget" framework can expose
77 debugging information in files under /sys/kernel/debug/.
78 The information in these files may help when you're
79 troubleshooting or bringing up a driver on a new board.
80 Enable these files by choosing "Y" here. If in doubt, or
81 to conserve kernel memory, say "N".
83 config USB_GADGET_VBUS_DRAW
84 int "Maximum VBUS Power usage (2-500 mA)"
88 Some devices need to draw power from USB when they are
89 configured, perhaps to operate circuitry or to recharge
90 batteries. This is in addition to any local power supply,
91 such as an AC adapter or batteries.
93 Enter the maximum power your device draws through USB, in
94 milliAmperes. The permitted range of values is 2 - 500 mA;
95 0 mA would be legal, but can make some hosts misbehave.
97 This value will be used except for system-specific gadget
98 drivers that have more specific information.
100 config USB_GADGET_STORAGE_NUM_BUFFERS
101 int "Number of storage pipeline buffers"
105 Usually 2 buffers are enough to establish a good buffering
106 pipeline. The number may be increased in order to compensate
107 for a bursty VFS behaviour. For instance there may be CPU wake up
108 latencies that makes the VFS to appear bursty in a system with
109 an CPU on-demand governor. Especially if DMA is doing IO to
110 offload the CPU. In this case the CPU will go into power
111 save often and spin up occasionally to move data within VFS.
112 If selecting USB_GADGET_DEBUG_FILES this value may be set by
113 a module parameter as well.
117 # USB Peripheral Controller Support
119 # The order here is alphabetical, except that integrated controllers go
120 # before discrete ones so they will be the initial/default value:
121 # - integrated/SOC controllers first
122 # - licensed IP used in both SOC and discrete versions
123 # - discrete ones (including all PCI-only controllers)
124 # - debug/dummy gadget+hcd is last.
126 menu "USB Peripheral Controller"
129 # Integrated controllers
133 tristate "Atmel AT91 USB Device Port"
136 Many Atmel AT91 processors (such as the AT91RM2000) have a
137 full speed USB Device Port with support for five configurable
138 endpoints (plus endpoint zero).
140 Say "y" to link the driver statically, or "m" to build a
141 dynamically linked module called "at91_udc" and force all
142 gadget drivers to also be dynamically linked.
145 tristate "LPC32XX USB Peripheral Controller"
146 depends on ARCH_LPC32XX
150 This option selects the USB device controller in the LPC32xx SoC.
152 Say "y" to link the driver statically, or "m" to build a
153 dynamically linked module called "lpc32xx_udc" and force all
154 gadget drivers to also be dynamically linked.
156 config USB_ATMEL_USBA
157 tristate "Atmel USBA"
158 depends on AVR32 || ARCH_AT91SAM9RL || ARCH_AT91SAM9G45
160 USBA is the integrated high-speed USB Device controller on
161 the AT32AP700x, some AT91SAM9 and AT91CAP9 processors from Atmel.
163 config USB_BCM63XX_UDC
164 tristate "Broadcom BCM63xx Peripheral Controller"
167 Many Broadcom BCM63xx chipsets (such as the BCM6328) have a
168 high speed USB Device Port with support for four fixed endpoints
169 (plus endpoint zero).
171 Say "y" to link the driver statically, or "m" to build a
172 dynamically linked module called "bcm63xx_udc".
175 tristate "Freescale Highspeed USB DR Peripheral Controller"
176 depends on FSL_SOC || ARCH_MXC
177 select USB_FSL_MPH_DR_OF if OF
179 Some of Freescale PowerPC and i.MX processors have a High Speed
180 Dual-Role(DR) USB controller, which supports device mode.
182 The number of programmable endpoints is different through
185 Say "y" to link the driver statically, or "m" to build a
186 dynamically linked module called "fsl_usb2_udc" and force
187 all gadget drivers to also be dynamically linked.
190 tristate "Faraday FUSB300 USB Peripheral Controller"
191 depends on !PHYS_ADDR_T_64BIT
193 Faraday usb device controller FUSB300 driver
196 tristate "OMAP USB Device Controller"
197 depends on ARCH_OMAP1
199 select ISP1301_OMAP if MACH_OMAP_H2 || MACH_OMAP_H3 || MACH_OMAP_H4_OTG
201 Many Texas Instruments OMAP processors have flexible full
202 speed USB device controllers, with support for up to 30
203 endpoints (plus endpoint zero). This driver supports the
204 controller in the OMAP 1611, and should work with controllers
205 in other OMAP processors too, given minor tweaks.
207 Say "y" to link the driver statically, or "m" to build a
208 dynamically linked module called "omap_udc" and force all
209 gadget drivers to also be dynamically linked.
212 tristate "PXA 25x or IXP 4xx"
213 depends on (ARCH_PXA && PXA25x) || ARCH_IXP4XX
215 Intel's PXA 25x series XScale ARM-5TE processors include
216 an integrated full speed USB 1.1 device controller. The
217 controller in the IXP 4xx series is register-compatible.
219 It has fifteen fixed-function endpoints, as well as endpoint
220 zero (for control transfers).
222 Say "y" to link the driver statically, or "m" to build a
223 dynamically linked module called "pxa25x_udc" and force all
224 gadget drivers to also be dynamically linked.
226 # if there's only one gadget driver, using only two bulk endpoints,
227 # don't waste memory for the other endpoints
228 config USB_PXA25X_SMALL
229 depends on USB_PXA25X
231 default n if USB_ETH_RNDIS
232 default y if USB_ZERO
234 default y if USB_G_SERIAL
237 tristate "Renesas R8A66597 USB Peripheral Controller"
239 R8A66597 is a discrete USB host and peripheral controller chip that
240 supports both full and high speed USB 2.0 data transfers.
241 It has nine configurable endpoints, and endpoint zero.
243 Say "y" to link the driver statically, or "m" to build a
244 dynamically linked module called "r8a66597_udc" and force all
245 gadget drivers to also be dynamically linked.
247 config USB_RENESAS_USBHS_UDC
248 tristate 'Renesas USBHS controller'
249 depends on USB_RENESAS_USBHS
251 Renesas USBHS is a discrete USB host and peripheral controller chip
252 that supports both full and high speed USB 2.0 data transfers.
253 It has nine or more configurable endpoints, and endpoint zero.
255 Say "y" to link the driver statically, or "m" to build a
256 dynamically linked module called "renesas_usbhs" and force all
257 gadget drivers to also be dynamically linked.
262 Intel's PXA 27x series XScale ARM v5TE processors include
263 an integrated full speed USB 1.1 device controller.
265 It has up to 23 endpoints, as well as endpoint zero (for
268 Say "y" to link the driver statically, or "m" to build a
269 dynamically linked module called "pxa27x_udc" and force all
270 gadget drivers to also be dynamically linked.
273 tristate "S3C HS/OtG USB Device controller"
274 depends on S3C_DEV_USB_HSOTG
276 The Samsung S3C64XX USB2.0 high-speed gadget controller
277 integrated into the S3C64XX series SoC.
280 tristate "Freescale i.MX1 USB Peripheral Controller"
284 Freescale's i.MX1 includes an integrated full speed
285 USB 1.1 device controller.
287 It has Six fixed-function endpoints, as well as endpoint
288 zero (for control transfers).
290 Say "y" to link the driver statically, or "m" to build a
291 dynamically linked module called "imx_udc" and force all
292 gadget drivers to also be dynamically linked.
295 tristate "S3C2410 USB Device Controller"
296 depends on ARCH_S3C24XX
298 Samsung's S3C2410 is an ARM-4 processor with an integrated
299 full speed USB 1.1 device controller. It has 4 configurable
300 endpoints, as well as endpoint zero (for control transfers).
302 This driver has been tested on the S3C2410, S3C2412, and
305 config USB_S3C2410_DEBUG
306 boolean "S3C2410 udc debug messages"
307 depends on USB_S3C2410
310 tristate "S3C2416, S3C2443 and S3C2450 USB Device Controller"
311 depends on ARCH_S3C24XX
313 Samsung's S3C2416, S3C2443 and S3C2450 is an ARM9 based SoC
314 integrated with dual speed USB 2.0 device controller. It has
315 8 endpoints, as well as endpoint zero.
317 This driver has been tested on S3C2416 and S3C2450 processors.
320 tristate "Marvell USB2.0 Device Controller"
321 depends on GENERIC_HARDIRQS
323 Marvell Socs (including PXA and MMP series) include a high speed
324 USB2.0 OTG controller, which can be configured as high speed or
325 full speed USB peripheral.
328 tristate "MARVELL PXA2128 USB 3.0 controller"
330 MARVELL PXA2128 Processor series include a super speed USB3.0 device
331 controller, which support super speed USB peripheral.
334 # Controllers available in both integrated and discrete versions
338 tristate "Renesas M66592 USB Peripheral Controller"
340 M66592 is a discrete USB peripheral controller chip that
341 supports both full and high speed USB 2.0 data transfers.
342 It has seven configurable endpoints, and endpoint zero.
344 Say "y" to link the driver statically, or "m" to build a
345 dynamically linked module called "m66592_udc" and force all
346 gadget drivers to also be dynamically linked.
349 # Controllers available only in discrete form (and all PCI controllers)
352 config USB_AMD5536UDC
353 tristate "AMD5536 UDC"
356 The AMD5536 UDC is part of the AMD Geode CS5536, an x86 southbridge.
357 It is a USB Highspeed DMA capable USB device controller. Beside ep0
358 it provides 4 IN and 4 OUT endpoints (bulk or interrupt type).
359 The UDC port supports OTG operation, and may be used as a host port
360 if it's not being used to implement peripheral or OTG roles.
362 Say "y" to link the driver statically, or "m" to build a
363 dynamically linked module called "amd5536udc" and force all
364 gadget drivers to also be dynamically linked.
367 tristate "Freescale QE/CPM USB Device Controller"
368 depends on FSL_SOC && (QUICC_ENGINE || CPM)
370 Some of Freescale PowerPC processors have a Full Speed
371 QE/CPM2 USB controller, which support device mode with 4
372 programmable endpoints. This driver supports the
373 controller in the MPC8360 and MPC8272, and should work with
374 controllers having QE or CPM2, given minor tweaks.
376 Set CONFIG_USB_GADGET to "m" to build this driver as a
377 dynamically linked module called "fsl_qe_udc".
380 tristate "PLX NET2272"
382 PLX NET2272 is a USB peripheral controller which supports
383 both full and high speed USB 2.0 data transfers.
385 It has three configurable endpoints, as well as endpoint zero
386 (for control transfer).
387 Say "y" to link the driver statically, or "m" to build a
388 dynamically linked module called "net2272" and force all
389 gadget drivers to also be dynamically linked.
391 config USB_NET2272_DMA
392 boolean "Support external DMA controller"
393 depends on USB_NET2272
395 The NET2272 part can optionally support an external DMA
396 controller, but your board has to have support in the
399 If unsure, say "N" here. The driver works fine in PIO mode.
402 tristate "NetChip 228x"
405 NetChip 2280 / 2282 is a PCI based USB peripheral controller which
406 supports both full and high speed USB 2.0 data transfers.
408 It has six configurable endpoints, as well as endpoint zero
409 (for control transfers) and several endpoints with dedicated
412 Say "y" to link the driver statically, or "m" to build a
413 dynamically linked module called "net2280" and force all
414 gadget drivers to also be dynamically linked.
417 tristate "Toshiba TC86C001 'Goku-S'"
420 The Toshiba TC86C001 is a PCI device which includes controllers
421 for full speed USB devices, IDE, I2C, SIO, plus a USB host (OHCI).
423 The device controller has three configurable (bulk or interrupt)
424 endpoints, plus endpoint zero (for control transfers).
426 Say "y" to link the driver statically, or "m" to build a
427 dynamically linked module called "goku_udc" and to force all
428 gadget drivers to also be dynamically linked.
431 tristate "Intel EG20T PCH/LAPIS Semiconductor IOH(ML7213/ML7831) UDC"
432 depends on PCI && GENERIC_HARDIRQS
434 This is a USB device driver for EG20T PCH.
435 EG20T PCH is the platform controller hub that is used in Intel's
436 general embedded platform. EG20T PCH has USB device interface.
437 Using this interface, it is able to access system devices connected
439 This driver enables USB device function.
440 USB device is a USB peripheral controller which
441 supports both full and high speed USB 2.0 data transfers.
442 This driver supports both control transfer and bulk transfer modes.
443 This driver dose not support interrupt transfer or isochronous
446 This driver also can be used for LAPIS Semiconductor's ML7213 which is
447 for IVI(In-Vehicle Infotainment) use.
448 ML7831 is for general purpose use.
449 ML7213/ML7831 is companion chip for Intel Atom E6xx series.
450 ML7213/ML7831 is completely compatible for Intel EG20T PCH.
453 # LAST -- dummy/emulated controller
457 tristate "Dummy HCD (DEVELOPMENT)"
458 depends on USB=y || (USB=m && USB_GADGET=m)
460 This host controller driver emulates USB, looping all data transfer
461 requests back to a USB "gadget driver" in the same host. The host
462 side is the master; the gadget side is the slave. Gadget drivers
463 can be high, full, or low speed; and they have access to endpoints
464 like those from NET2280, PXA2xx, or SA1100 hardware.
466 This may help in some stages of creating a driver to embed in a
467 Linux device, since it lets you debug several parts of the gadget
468 driver without its hardware or drivers being involved.
470 Since such a gadget side driver needs to interoperate with a host
471 side Linux-USB device driver, this may help to debug both sides
472 of a USB protocol stack.
474 Say "y" to link the driver statically, or "m" to build a
475 dynamically linked module called "dummy_hcd" and force all
476 gadget drivers to also be dynamically linked.
478 # NOTE: Please keep dummy_hcd LAST so that "real hardware" appears
479 # first and will be selected by default.
487 # composite based drivers
488 config USB_LIBCOMPOSITE
491 depends on USB_GADGET
512 tristate "USB Gadget Drivers"
515 A Linux "Gadget Driver" talks to the USB Peripheral Controller
516 driver through the abstract "gadget" API. Some other operating
517 systems call these "client" drivers, of which "class drivers"
518 are a subset (implementing a USB device class specification).
519 A gadget driver implements one or more USB functions using
520 the peripheral hardware.
522 Gadget drivers are hardware-neutral, or "platform independent",
523 except that they sometimes must understand quirks or limitations
524 of the particular controllers they work with. For example, when
525 a controller doesn't support alternate configurations or provide
526 enough of the right types of endpoints, the gadget driver might
527 not be able work with that controller, or might need to implement
528 a less common variant of a device class protocol.
530 # this first set of drivers all depend on bulk-capable hardware.
533 tristate "Gadget Zero (DEVELOPMENT)"
534 select USB_LIBCOMPOSITE
537 Gadget Zero is a two-configuration device. It either sinks and
538 sources bulk data; or it loops back a configurable number of
539 transfers. It also implements control requests, for "chapter 9"
540 conformance. The driver needs only two bulk-capable endpoints, so
541 it can work on top of most device-side usb controllers. It's
542 useful for testing, and is also a working example showing how
543 USB "gadget drivers" can be written.
545 Make this be the first driver you try using on top of any new
546 USB peripheral controller driver. Then you can use host-side
547 test software, like the "usbtest" driver, to put your hardware
548 and its driver through a basic set of functional tests.
550 Gadget Zero also works with the host-side "usb-skeleton" driver,
551 and with many kinds of host-side test software. You may need
552 to tweak product and vendor IDs before host software knows about
553 this device, and arrange to select an appropriate configuration.
555 Say "y" to link the driver statically, or "m" to build a
556 dynamically linked module called "g_zero".
558 config USB_ZERO_HNPTEST
559 boolean "HNP Test Device"
560 depends on USB_ZERO && USB_OTG
562 You can configure this device to enumerate using the device
563 identifiers of the USB-OTG test device. That means that when
564 this gadget connects to another OTG device, with this one using
565 the "B-Peripheral" role, that device will use HNP to let this
566 one serve as the USB host instead (in the "B-Host" role).
569 tristate "Audio Gadget"
571 select USB_LIBCOMPOSITE
574 This Gadget Audio driver is compatible with USB Audio Class
575 specification 2.0. It implements 1 AudioControl interface,
576 1 AudioStreaming Interface each for USB-OUT and USB-IN.
577 Number of channels, sample rate and sample size can be
578 specified as module parameters.
579 This driver doesn't expect any real Audio codec to be present
580 on the device - the audio streams are simply sinked to and
581 sourced from a virtual ALSA sound card created. The user-space
582 application may choose to do whatever it wants with the data
583 received from the USB Host and choose to provide whatever it
584 wants as audio data to the USB Host.
586 Say "y" to link the driver statically, or "m" to build a
587 dynamically linked module called "g_audio".
590 bool "UAC 1.0 (Legacy)"
593 If you instead want older UAC Spec-1.0 driver that also has audio
594 paths hardwired to the Audio codec chip on-board and doesn't work
598 tristate "Ethernet Gadget (with CDC Ethernet support)"
600 select USB_LIBCOMPOSITE
604 This driver implements Ethernet style communication, in one of
607 - The "Communication Device Class" (CDC) Ethernet Control Model.
608 That protocol is often avoided with pure Ethernet adapters, in
609 favor of simpler vendor-specific hardware, but is widely
610 supported by firmware for smart network devices.
612 - On hardware can't implement that protocol, a simple CDC subset
613 is used, placing fewer demands on USB.
615 - CDC Ethernet Emulation Model (EEM) is a newer standard that has
616 a simpler interface that can be used by more USB hardware.
618 RNDIS support is an additional option, more demanding than than
621 Within the USB device, this gadget driver exposes a network device
622 "usbX", where X depends on what other networking devices you have.
623 Treat it like a two-node Ethernet link: host, and gadget.
625 The Linux-USB host-side "usbnet" driver interoperates with this
626 driver, so that deep I/O queues can be supported. On 2.4 kernels,
627 use "CDCEther" instead, if you're using the CDC option. That CDC
628 mode should also interoperate with standard CDC Ethernet class
629 drivers on other host operating systems.
631 Say "y" to link the driver statically, or "m" to build a
632 dynamically linked module called "g_ether".
637 select USB_LIBCOMPOSITE
640 Microsoft Windows XP bundles the "Remote NDIS" (RNDIS) protocol,
641 and Microsoft provides redistributable binary RNDIS drivers for
642 older versions of Windows.
644 If you say "y" here, the Ethernet gadget driver will try to provide
645 a second device configuration, supporting RNDIS to talk to such
648 To make MS-Windows work with this, use Documentation/usb/linux.inf
649 as the "driver info file". For versions of MS-Windows older than
650 XP, you'll need to download drivers from Microsoft's website; a URL
651 is given in comments found in that info file.
654 bool "Ethernet Emulation Model (EEM) support"
656 select USB_LIBCOMPOSITE
659 CDC EEM is a newer USB standard that is somewhat simpler than CDC ECM
660 and therefore can be supported by more hardware. Technically ECM and
661 EEM are designed for different applications. The ECM model extends
662 the network interface to the target (e.g. a USB cable modem), and the
663 EEM model is for mobile devices to communicate with hosts using
664 ethernet over USB. For Linux gadgets, however, the interface with
665 the host is the same (a usbX device), so the differences are minimal.
667 If you say "y" here, the Ethernet gadget driver will use the EEM
668 protocol rather than ECM. If unsure, say "n".
671 tristate "Network Control Model (NCM) support"
673 select USB_LIBCOMPOSITE
677 This driver implements USB CDC NCM subclass standard. NCM is
678 an advanced protocol for Ethernet encapsulation, allows grouping
679 of several ethernet frames into one USB transfer and different
680 alignment possibilities.
682 Say "y" to link the driver statically, or "m" to build a
683 dynamically linked module called "g_ncm".
686 tristate "Gadget Filesystem"
688 This driver provides a filesystem based API that lets user mode
689 programs implement a single-configuration USB device, including
690 endpoint I/O and control requests that don't relate to enumeration.
691 All endpoints, transfer speeds, and transfer types supported by
692 the hardware are available, through read() and write() calls.
694 Say "y" to link the driver statically, or "m" to build a
695 dynamically linked module called "gadgetfs".
697 config USB_FUNCTIONFS
698 tristate "Function Filesystem"
699 select USB_LIBCOMPOSITE
700 select USB_FUNCTIONFS_GENERIC if !(USB_FUNCTIONFS_ETH || USB_FUNCTIONFS_RNDIS)
702 The Function Filesystem (FunctionFS) lets one create USB
703 composite functions in user space in the same way GadgetFS
704 lets one create USB gadgets in user space. This allows creation
705 of composite gadgets such that some of the functions are
706 implemented in kernel space (for instance Ethernet, serial or
707 mass storage) and other are implemented in user space.
709 If you say "y" or "m" here you will be able what kind of
710 configurations the gadget will provide.
712 Say "y" to link the driver statically, or "m" to build
713 a dynamically linked module called "g_ffs".
715 config USB_FUNCTIONFS_ETH
716 bool "Include configuration with CDC ECM (Ethernet)"
717 depends on USB_FUNCTIONFS && NET
720 Include a configuration with CDC ECM function (Ethernet) and the
723 config USB_FUNCTIONFS_RNDIS
724 bool "Include configuration with RNDIS (Ethernet)"
725 depends on USB_FUNCTIONFS && NET
728 Include a configuration with RNDIS function (Ethernet) and the Filesystem.
730 config USB_FUNCTIONFS_GENERIC
731 bool "Include 'pure' configuration"
732 depends on USB_FUNCTIONFS
734 Include a configuration with the Function Filesystem alone with
735 no Ethernet interface.
737 config USB_MASS_STORAGE
738 tristate "Mass Storage Gadget"
740 select USB_LIBCOMPOSITE
742 The Mass Storage Gadget acts as a USB Mass Storage disk drive.
743 As its storage repository it can use a regular file or a block
744 device (in much the same way as the "loop" device driver),
745 specified as a module parameter or sysfs option.
747 This driver is a replacement for now removed File-backed
748 Storage Gadget (g_file_storage).
750 Say "y" to link the driver statically, or "m" to build
751 a dynamically linked module called "g_mass_storage".
753 config USB_GADGET_TARGET
754 tristate "USB Gadget Target Fabric Module"
755 depends on TARGET_CORE
756 select USB_LIBCOMPOSITE
758 This fabric is an USB gadget. Two USB protocols are supported that is
759 BBB or BOT (Bulk Only Transport) and UAS (USB Attached SCSI). BOT is
760 advertised on alternative interface 0 (primary) and UAS is on
761 alternative interface 1. Both protocols can work on USB2.0 and USB3.0.
762 UAS utilizes the USB 3.0 feature called streams support.
765 tristate "Serial Gadget (with CDC ACM and CDC OBEX support)"
771 select USB_LIBCOMPOSITE
773 The Serial Gadget talks to the Linux-USB generic serial driver.
774 This driver supports a CDC-ACM module option, which can be used
775 to interoperate with MS-Windows hosts or with the Linux-USB
778 This driver also supports a CDC-OBEX option. You will need a
779 user space OBEX server talking to /dev/ttyGS*, since the kernel
780 itself doesn't implement the OBEX protocol.
782 Say "y" to link the driver statically, or "m" to build a
783 dynamically linked module called "g_serial".
785 For more information, see Documentation/usb/gadget_serial.txt
786 which includes instructions and a "driver info file" needed to
787 make MS-Windows work with CDC ACM.
789 config USB_MIDI_GADGET
790 tristate "MIDI Gadget"
792 select USB_LIBCOMPOSITE
795 The MIDI Gadget acts as a USB Audio device, with one MIDI
796 input and one MIDI output. These MIDI jacks appear as
797 a sound "card" in the ALSA sound system. Other MIDI
798 connections can then be made on the gadget system, using
799 ALSA's aconnect utility etc.
801 Say "y" to link the driver statically, or "m" to build a
802 dynamically linked module called "g_midi".
805 tristate "Printer Gadget"
806 select USB_LIBCOMPOSITE
808 The Printer Gadget channels data between the USB host and a
809 userspace program driving the print engine. The user space
810 program reads and writes the device file /dev/g_printer to
811 receive or send printer data. It can use ioctl calls to
812 the device file to get or set printer status.
814 Say "y" to link the driver statically, or "m" to build a
815 dynamically linked module called "g_printer".
817 For more information, see Documentation/usb/gadget_printer.txt
818 which includes sample code for accessing the device file.
822 config USB_CDC_COMPOSITE
823 tristate "CDC Composite Device (Ethernet and ACM)"
825 select USB_LIBCOMPOSITE
830 This driver provides two functions in one configuration:
831 a CDC Ethernet (ECM) link, and a CDC ACM (serial port) link.
833 This driver requires four bulk and two interrupt endpoints,
834 plus the ability to handle altsettings. Not all peripheral
835 controllers are that capable.
837 Say "y" to link the driver statically, or "m" to build a
838 dynamically linked module.
841 tristate "Nokia composite gadget"
843 select USB_LIBCOMPOSITE
848 The Nokia composite gadget provides support for acm, obex
849 and phonet in only one composite gadget driver.
851 It's only really useful for N900 hardware. If you're building
852 a kernel for N900, say Y or M here. If unsure, say N.
855 tristate "CDC Composite Device (ACM and mass storage)"
857 select USB_LIBCOMPOSITE
861 This driver provides two functions in one configuration:
862 a mass storage, and a CDC ACM (serial port) link.
864 Say "y" to link the driver statically, or "m" to build a
865 dynamically linked module called "g_acm_ms".
868 tristate "Multifunction Composite Gadget"
869 depends on BLOCK && NET
870 select USB_G_MULTI_CDC if !USB_G_MULTI_RNDIS
871 select USB_LIBCOMPOSITE
876 The Multifunction Composite Gadget provides Ethernet (RNDIS
877 and/or CDC Ethernet), mass storage and ACM serial link
880 You will be asked to choose which of the two configurations is
881 to be available in the gadget. At least one configuration must
882 be chosen to make the gadget usable. Selecting more than one
883 configuration will prevent Windows from automatically detecting
884 the gadget as a composite gadget, so an INF file will be needed to
887 Say "y" to link the driver statically, or "m" to build a
888 dynamically linked module called "g_multi".
890 config USB_G_MULTI_RNDIS
891 bool "RNDIS + CDC Serial + Storage configuration"
892 depends on USB_G_MULTI
895 This option enables a configuration with RNDIS, CDC Serial and
896 Mass Storage functions available in the Multifunction Composite
897 Gadget. This is the configuration dedicated for Windows since RNDIS
898 is Microsoft's protocol.
902 config USB_G_MULTI_CDC
903 bool "CDC Ethernet + CDC Serial + Storage configuration"
904 depends on USB_G_MULTI
907 This option enables a configuration with CDC Ethernet (ECM), CDC
908 Serial and Mass Storage functions available in the Multifunction
916 tristate "HID Gadget"
917 select USB_LIBCOMPOSITE
919 The HID gadget driver provides generic emulation of USB
920 Human Interface Devices (HID).
922 For more information, see Documentation/usb/gadget_hid.txt which
923 includes sample code for accessing the device files.
925 Say "y" to link the driver statically, or "m" to build a
926 dynamically linked module called "g_hid".
928 # Standalone / single function gadgets
930 tristate "EHCI Debug Device Gadget"
932 select USB_LIBCOMPOSITE
934 This gadget emulates an EHCI Debug device. This is useful when you want
935 to interact with an EHCI Debug Port.
937 Say "y" to link the driver statically, or "m" to build a
938 dynamically linked module called "g_dbgp".
942 prompt "EHCI Debug Device mode"
943 default USB_G_DBGP_SERIAL
945 config USB_G_DBGP_PRINTK
946 depends on USB_G_DBGP
949 Directly printk() received data. No interaction.
951 config USB_G_DBGP_SERIAL
952 depends on USB_G_DBGP
956 Userland can interact using /dev/ttyGSxxx.
960 # put drivers that need isochronous transfer support (for audio
961 # or video class gadget drivers), or specific hardware, here.
963 tristate "USB Webcam Gadget"
965 select USB_LIBCOMPOSITE
966 select VIDEOBUF2_VMALLOC
968 The Webcam Gadget acts as a composite USB Audio and Video Class
969 device. It provides a userspace API to process UVC control requests
970 and stream video data to the host.
972 Say "y" to link the driver statically, or "m" to build a
973 dynamically linked module called "g_webcam".