2 # USB Gadget support on a system involves
3 # (a) a peripheral controller, and
4 # (b) the gadget driver using it.
6 # NOTE: Gadget support ** DOES NOT ** depend on host-side CONFIG_USB !!
8 # - Host systems (like PCs) need CONFIG_USB (with "A" jacks).
9 # - Peripherals (like PDAs) need CONFIG_USB_GADGET (with "B" jacks).
10 # - Some systems have both kinds of controllers.
12 # With help from a special transceiver and a "Mini-AB" jack, systems with
13 # both kinds of controller can also support "USB On-the-Go" (CONFIG_USB_OTG).
17 tristate "USB Gadget Support"
20 USB is a master/slave protocol, organized with one master
21 host (such as a PC) controlling up to 127 peripheral devices.
22 The USB hardware is asymmetric, which makes it easier to set up:
23 you can't connect a "to-the-host" connector to a peripheral.
25 Linux can run in the host, or in the peripheral. In both cases
26 you need a low level bus controller driver, and some software
27 talking to it. Peripheral controllers are often discrete silicon,
28 or are integrated with the CPU in a microcontroller. The more
29 familiar host side controllers have names like "EHCI", "OHCI",
30 or "UHCI", and are usually integrated into southbridges on PC
33 Enable this configuration option if you want to run Linux inside
34 a USB peripheral device. Configure one hardware driver for your
35 peripheral/device side bus controller, and a "gadget driver" for
36 your peripheral protocol. (If you use modular gadget drivers,
37 you may configure more than one.)
39 If in doubt, say "N" and don't enable these drivers; most people
40 don't have this kind of hardware (except maybe inside Linux PDAs).
42 For more information, see <http://www.linux-usb.org/gadget> and
43 the kernel DocBook documentation for this API.
47 config USB_GADGET_DEBUG
48 boolean "Debugging messages (DEVELOPMENT)"
49 depends on DEBUG_KERNEL
51 Many controller and gadget drivers will print some debugging
52 messages if you use this option to ask for those messages.
54 Avoid enabling these messages, even if you're actively
55 debugging such a driver. Many drivers will emit so many
56 messages that the driver timings are affected, which will
57 either create new failure modes or remove the one you're
58 trying to track down. Never enable these messages for a
61 config USB_GADGET_DEBUG_FILES
62 boolean "Debugging information files (DEVELOPMENT)"
65 Some of the drivers in the "gadget" framework can expose
66 debugging information in files such as /proc/driver/udc
67 (for a peripheral controller). The information in these
68 files may help when you're troubleshooting or bringing up a
69 driver on a new board. Enable these files by choosing "Y"
70 here. If in doubt, or to conserve kernel memory, say "N".
72 config USB_GADGET_DEBUG_FS
73 boolean "Debugging information files in debugfs (DEVELOPMENT)"
76 Some of the drivers in the "gadget" framework can expose
77 debugging information in files under /sys/kernel/debug/.
78 The information in these files may help when you're
79 troubleshooting or bringing up a driver on a new board.
80 Enable these files by choosing "Y" here. If in doubt, or
81 to conserve kernel memory, say "N".
83 config USB_GADGET_VBUS_DRAW
84 int "Maximum VBUS Power usage (2-500 mA)"
88 Some devices need to draw power from USB when they are
89 configured, perhaps to operate circuitry or to recharge
90 batteries. This is in addition to any local power supply,
91 such as an AC adapter or batteries.
93 Enter the maximum power your device draws through USB, in
94 milliAmperes. The permitted range of values is 2 - 500 mA;
95 0 mA would be legal, but can make some hosts misbehave.
97 This value will be used except for system-specific gadget
98 drivers that have more specific information.
100 config USB_GADGET_STORAGE_NUM_BUFFERS
101 int "Number of storage pipeline buffers"
105 Usually 2 buffers are enough to establish a good buffering
106 pipeline. The number may be increased in order to compensate
107 for a bursty VFS behaviour. For instance there may be CPU wake up
108 latencies that makes the VFS to appear bursty in a system with
109 an CPU on-demand governor. Especially if DMA is doing IO to
110 offload the CPU. In this case the CPU will go into power
111 save often and spin up occasionally to move data within VFS.
112 If selecting USB_GADGET_DEBUG_FILES this value may be set by
113 a module parameter as well.
117 # USB Peripheral Controller Support
119 # The order here is alphabetical, except that integrated controllers go
120 # before discrete ones so they will be the initial/default value:
121 # - integrated/SOC controllers first
122 # - licensed IP used in both SOC and discrete versions
123 # - discrete ones (including all PCI-only controllers)
124 # - debug/dummy gadget+hcd is last.
126 menu "USB Peripheral Controller"
129 # Integrated controllers
133 tristate "Atmel AT91 USB Device Port"
136 Many Atmel AT91 processors (such as the AT91RM2000) have a
137 full speed USB Device Port with support for five configurable
138 endpoints (plus endpoint zero).
140 Say "y" to link the driver statically, or "m" to build a
141 dynamically linked module called "at91_udc" and force all
142 gadget drivers to also be dynamically linked.
145 tristate "LPC32XX USB Peripheral Controller"
146 depends on ARCH_LPC32XX
149 This option selects the USB device controller in the LPC32xx SoC.
151 Say "y" to link the driver statically, or "m" to build a
152 dynamically linked module called "lpc32xx_udc" and force all
153 gadget drivers to also be dynamically linked.
155 config USB_ATMEL_USBA
156 tristate "Atmel USBA"
157 depends on AVR32 || ARCH_AT91SAM9RL || ARCH_AT91SAM9G45
159 USBA is the integrated high-speed USB Device controller on
160 the AT32AP700x, some AT91SAM9 and AT91CAP9 processors from Atmel.
162 config USB_BCM63XX_UDC
163 tristate "Broadcom BCM63xx Peripheral Controller"
166 Many Broadcom BCM63xx chipsets (such as the BCM6328) have a
167 high speed USB Device Port with support for four fixed endpoints
168 (plus endpoint zero).
170 Say "y" to link the driver statically, or "m" to build a
171 dynamically linked module called "bcm63xx_udc".
174 tristate "Freescale Highspeed USB DR Peripheral Controller"
175 depends on FSL_SOC || ARCH_MXC
176 select USB_FSL_MPH_DR_OF if OF
178 Some of Freescale PowerPC and i.MX processors have a High Speed
179 Dual-Role(DR) USB controller, which supports device mode.
181 The number of programmable endpoints is different through
184 Say "y" to link the driver statically, or "m" to build a
185 dynamically linked module called "fsl_usb2_udc" and force
186 all gadget drivers to also be dynamically linked.
189 tristate "Faraday FUSB300 USB Peripheral Controller"
190 depends on !PHYS_ADDR_T_64BIT
192 Faraday usb device controller FUSB300 driver
195 tristate "OMAP USB Device Controller"
196 depends on ARCH_OMAP1
197 select ISP1301_OMAP if MACH_OMAP_H2 || MACH_OMAP_H3 || MACH_OMAP_H4_OTG
198 select USB_OTG_UTILS if ARCH_OMAP
200 Many Texas Instruments OMAP processors have flexible full
201 speed USB device controllers, with support for up to 30
202 endpoints (plus endpoint zero). This driver supports the
203 controller in the OMAP 1611, and should work with controllers
204 in other OMAP processors too, given minor tweaks.
206 Say "y" to link the driver statically, or "m" to build a
207 dynamically linked module called "omap_udc" and force all
208 gadget drivers to also be dynamically linked.
211 tristate "PXA 25x or IXP 4xx"
212 depends on (ARCH_PXA && PXA25x) || ARCH_IXP4XX
215 Intel's PXA 25x series XScale ARM-5TE processors include
216 an integrated full speed USB 1.1 device controller. The
217 controller in the IXP 4xx series is register-compatible.
219 It has fifteen fixed-function endpoints, as well as endpoint
220 zero (for control transfers).
222 Say "y" to link the driver statically, or "m" to build a
223 dynamically linked module called "pxa25x_udc" and force all
224 gadget drivers to also be dynamically linked.
226 # if there's only one gadget driver, using only two bulk endpoints,
227 # don't waste memory for the other endpoints
228 config USB_PXA25X_SMALL
229 depends on USB_PXA25X
231 default n if USB_ETH_RNDIS
232 default y if USB_ZERO
234 default y if USB_G_SERIAL
237 tristate "Renesas R8A66597 USB Peripheral Controller"
239 R8A66597 is a discrete USB host and peripheral controller chip that
240 supports both full and high speed USB 2.0 data transfers.
241 It has nine configurable endpoints, and endpoint zero.
243 Say "y" to link the driver statically, or "m" to build a
244 dynamically linked module called "r8a66597_udc" and force all
245 gadget drivers to also be dynamically linked.
247 config USB_RENESAS_USBHS_UDC
248 tristate 'Renesas USBHS controller'
249 depends on USB_RENESAS_USBHS
251 Renesas USBHS is a discrete USB host and peripheral controller chip
252 that supports both full and high speed USB 2.0 data transfers.
253 It has nine or more configurable endpoints, and endpoint zero.
255 Say "y" to link the driver statically, or "m" to build a
256 dynamically linked module called "renesas_usbhs" and force all
257 gadget drivers to also be dynamically linked.
261 depends on ARCH_PXA && (PXA27x || PXA3xx)
264 Intel's PXA 27x series XScale ARM v5TE processors include
265 an integrated full speed USB 1.1 device controller.
267 It has up to 23 endpoints, as well as endpoint zero (for
270 Say "y" to link the driver statically, or "m" to build a
271 dynamically linked module called "pxa27x_udc" and force all
272 gadget drivers to also be dynamically linked.
275 tristate "S3C HS/OtG USB Device controller"
276 depends on S3C_DEV_USB_HSOTG
278 The Samsung S3C64XX USB2.0 high-speed gadget controller
279 integrated into the S3C64XX series SoC.
282 tristate "Freescale i.MX1 USB Peripheral Controller"
285 Freescale's i.MX1 includes an integrated full speed
286 USB 1.1 device controller.
288 It has Six fixed-function endpoints, as well as endpoint
289 zero (for control transfers).
291 Say "y" to link the driver statically, or "m" to build a
292 dynamically linked module called "imx_udc" and force all
293 gadget drivers to also be dynamically linked.
296 tristate "S3C2410 USB Device Controller"
297 depends on ARCH_S3C24XX
299 Samsung's S3C2410 is an ARM-4 processor with an integrated
300 full speed USB 1.1 device controller. It has 4 configurable
301 endpoints, as well as endpoint zero (for control transfers).
303 This driver has been tested on the S3C2410, S3C2412, and
306 config USB_S3C2410_DEBUG
307 boolean "S3C2410 udc debug messages"
308 depends on USB_S3C2410
311 tristate "S3C2416, S3C2443 and S3C2450 USB Device Controller"
312 depends on ARCH_S3C24XX
314 Samsung's S3C2416, S3C2443 and S3C2450 is an ARM9 based SoC
315 integrated with dual speed USB 2.0 device controller. It has
316 8 endpoints, as well as endpoint zero.
318 This driver has been tested on S3C2416 and S3C2450 processors.
321 tristate "Marvell USB2.0 Device Controller"
323 Marvell Socs (including PXA and MMP series) include a high speed
324 USB2.0 OTG controller, which can be configured as high speed or
325 full speed USB peripheral.
328 tristate "MARVELL PXA2128 USB 3.0 controller"
330 select USB_GADGET_DUALSPEED
331 select USB_GADGET_SUPERSPEED
333 MARVELL PXA2128 Processor series include a super speed USB3.0 device
334 controller, which support super speed USB peripheral.
337 # Controllers available in both integrated and discrete versions
340 # musb builds in ../musb along with host support
341 config USB_GADGET_MUSB_HDRC
342 tristate "Inventra HDRC USB Peripheral (TI, ADI, ...)"
343 depends on USB_MUSB_HDRC
345 This OTG-capable silicon IP is used in dual designs including
346 the TI DaVinci, OMAP 243x, OMAP 343x, TUSB 6010, and ADI Blackfin
349 tristate "Renesas M66592 USB Peripheral Controller"
351 M66592 is a discrete USB peripheral controller chip that
352 supports both full and high speed USB 2.0 data transfers.
353 It has seven configurable endpoints, and endpoint zero.
355 Say "y" to link the driver statically, or "m" to build a
356 dynamically linked module called "m66592_udc" and force all
357 gadget drivers to also be dynamically linked.
360 # Controllers available only in discrete form (and all PCI controllers)
363 config USB_AMD5536UDC
364 tristate "AMD5536 UDC"
367 The AMD5536 UDC is part of the AMD Geode CS5536, an x86 southbridge.
368 It is a USB Highspeed DMA capable USB device controller. Beside ep0
369 it provides 4 IN and 4 OUT endpoints (bulk or interrupt type).
370 The UDC port supports OTG operation, and may be used as a host port
371 if it's not being used to implement peripheral or OTG roles.
373 Say "y" to link the driver statically, or "m" to build a
374 dynamically linked module called "amd5536udc" and force all
375 gadget drivers to also be dynamically linked.
378 tristate "Freescale QE/CPM USB Device Controller"
379 depends on FSL_SOC && (QUICC_ENGINE || CPM)
381 Some of Freescale PowerPC processors have a Full Speed
382 QE/CPM2 USB controller, which support device mode with 4
383 programmable endpoints. This driver supports the
384 controller in the MPC8360 and MPC8272, and should work with
385 controllers having QE or CPM2, given minor tweaks.
387 Set CONFIG_USB_GADGET to "m" to build this driver as a
388 dynamically linked module called "fsl_qe_udc".
391 tristate "PLX NET2272"
393 PLX NET2272 is a USB peripheral controller which supports
394 both full and high speed USB 2.0 data transfers.
396 It has three configurable endpoints, as well as endpoint zero
397 (for control transfer).
398 Say "y" to link the driver statically, or "m" to build a
399 dynamically linked module called "net2272" and force all
400 gadget drivers to also be dynamically linked.
402 config USB_NET2272_DMA
403 boolean "Support external DMA controller"
404 depends on USB_NET2272
406 The NET2272 part can optionally support an external DMA
407 controller, but your board has to have support in the
410 If unsure, say "N" here. The driver works fine in PIO mode.
413 tristate "NetChip 228x"
416 NetChip 2280 / 2282 is a PCI based USB peripheral controller which
417 supports both full and high speed USB 2.0 data transfers.
419 It has six configurable endpoints, as well as endpoint zero
420 (for control transfers) and several endpoints with dedicated
423 Say "y" to link the driver statically, or "m" to build a
424 dynamically linked module called "net2280" and force all
425 gadget drivers to also be dynamically linked.
428 tristate "Toshiba TC86C001 'Goku-S'"
431 The Toshiba TC86C001 is a PCI device which includes controllers
432 for full speed USB devices, IDE, I2C, SIO, plus a USB host (OHCI).
434 The device controller has three configurable (bulk or interrupt)
435 endpoints, plus endpoint zero (for control transfers).
437 Say "y" to link the driver statically, or "m" to build a
438 dynamically linked module called "goku_udc" and to force all
439 gadget drivers to also be dynamically linked.
442 tristate "Intel EG20T PCH/LAPIS Semiconductor IOH(ML7213/ML7831) UDC"
445 This is a USB device driver for EG20T PCH.
446 EG20T PCH is the platform controller hub that is used in Intel's
447 general embedded platform. EG20T PCH has USB device interface.
448 Using this interface, it is able to access system devices connected
450 This driver enables USB device function.
451 USB device is a USB peripheral controller which
452 supports both full and high speed USB 2.0 data transfers.
453 This driver supports both control transfer and bulk transfer modes.
454 This driver dose not support interrupt transfer or isochronous
457 This driver also can be used for LAPIS Semiconductor's ML7213 which is
458 for IVI(In-Vehicle Infotainment) use.
459 ML7831 is for general purpose use.
460 ML7213/ML7831 is companion chip for Intel Atom E6xx series.
461 ML7213/ML7831 is completely compatible for Intel EG20T PCH.
464 # LAST -- dummy/emulated controller
468 tristate "Dummy HCD (DEVELOPMENT)"
469 depends on USB=y || (USB=m && USB_GADGET=m)
471 This host controller driver emulates USB, looping all data transfer
472 requests back to a USB "gadget driver" in the same host. The host
473 side is the master; the gadget side is the slave. Gadget drivers
474 can be high, full, or low speed; and they have access to endpoints
475 like those from NET2280, PXA2xx, or SA1100 hardware.
477 This may help in some stages of creating a driver to embed in a
478 Linux device, since it lets you debug several parts of the gadget
479 driver without its hardware or drivers being involved.
481 Since such a gadget side driver needs to interoperate with a host
482 side Linux-USB device driver, this may help to debug both sides
483 of a USB protocol stack.
485 Say "y" to link the driver statically, or "m" to build a
486 dynamically linked module called "dummy_hcd" and force all
487 gadget drivers to also be dynamically linked.
489 # NOTE: Please keep dummy_hcd LAST so that "real hardware" appears
490 # first and will be selected by default.
498 # composite based drivers
499 config USB_LIBCOMPOSITE
501 depends on USB_GADGET
507 tristate "USB Gadget Drivers"
510 A Linux "Gadget Driver" talks to the USB Peripheral Controller
511 driver through the abstract "gadget" API. Some other operating
512 systems call these "client" drivers, of which "class drivers"
513 are a subset (implementing a USB device class specification).
514 A gadget driver implements one or more USB functions using
515 the peripheral hardware.
517 Gadget drivers are hardware-neutral, or "platform independent",
518 except that they sometimes must understand quirks or limitations
519 of the particular controllers they work with. For example, when
520 a controller doesn't support alternate configurations or provide
521 enough of the right types of endpoints, the gadget driver might
522 not be able work with that controller, or might need to implement
523 a less common variant of a device class protocol.
525 # this first set of drivers all depend on bulk-capable hardware.
528 tristate "Gadget Zero (DEVELOPMENT)"
529 select USB_LIBCOMPOSITE
532 Gadget Zero is a two-configuration device. It either sinks and
533 sources bulk data; or it loops back a configurable number of
534 transfers. It also implements control requests, for "chapter 9"
535 conformance. The driver needs only two bulk-capable endpoints, so
536 it can work on top of most device-side usb controllers. It's
537 useful for testing, and is also a working example showing how
538 USB "gadget drivers" can be written.
540 Make this be the first driver you try using on top of any new
541 USB peripheral controller driver. Then you can use host-side
542 test software, like the "usbtest" driver, to put your hardware
543 and its driver through a basic set of functional tests.
545 Gadget Zero also works with the host-side "usb-skeleton" driver,
546 and with many kinds of host-side test software. You may need
547 to tweak product and vendor IDs before host software knows about
548 this device, and arrange to select an appropriate configuration.
550 Say "y" to link the driver statically, or "m" to build a
551 dynamically linked module called "g_zero".
553 config USB_ZERO_HNPTEST
554 boolean "HNP Test Device"
555 depends on USB_ZERO && USB_OTG
557 You can configure this device to enumerate using the device
558 identifiers of the USB-OTG test device. That means that when
559 this gadget connects to another OTG device, with this one using
560 the "B-Peripheral" role, that device will use HNP to let this
561 one serve as the USB host instead (in the "B-Host" role).
564 tristate "Audio Gadget"
566 select USB_LIBCOMPOSITE
569 This Gadget Audio driver is compatible with USB Audio Class
570 specification 2.0. It implements 1 AudioControl interface,
571 1 AudioStreaming Interface each for USB-OUT and USB-IN.
572 Number of channels, sample rate and sample size can be
573 specified as module parameters.
574 This driver doesn't expect any real Audio codec to be present
575 on the device - the audio streams are simply sinked to and
576 sourced from a virtual ALSA sound card created. The user-space
577 application may choose to do whatever it wants with the data
578 received from the USB Host and choose to provide whatever it
579 wants as audio data to the USB Host.
581 Say "y" to link the driver statically, or "m" to build a
582 dynamically linked module called "g_audio".
585 bool "UAC 1.0 (Legacy)"
588 If you instead want older UAC Spec-1.0 driver that also has audio
589 paths hardwired to the Audio codec chip on-board and doesn't work
593 tristate "Ethernet Gadget (with CDC Ethernet support)"
595 select USB_LIBCOMPOSITE
598 This driver implements Ethernet style communication, in one of
601 - The "Communication Device Class" (CDC) Ethernet Control Model.
602 That protocol is often avoided with pure Ethernet adapters, in
603 favor of simpler vendor-specific hardware, but is widely
604 supported by firmware for smart network devices.
606 - On hardware can't implement that protocol, a simple CDC subset
607 is used, placing fewer demands on USB.
609 - CDC Ethernet Emulation Model (EEM) is a newer standard that has
610 a simpler interface that can be used by more USB hardware.
612 RNDIS support is an additional option, more demanding than than
615 Within the USB device, this gadget driver exposes a network device
616 "usbX", where X depends on what other networking devices you have.
617 Treat it like a two-node Ethernet link: host, and gadget.
619 The Linux-USB host-side "usbnet" driver interoperates with this
620 driver, so that deep I/O queues can be supported. On 2.4 kernels,
621 use "CDCEther" instead, if you're using the CDC option. That CDC
622 mode should also interoperate with standard CDC Ethernet class
623 drivers on other host operating systems.
625 Say "y" to link the driver statically, or "m" to build a
626 dynamically linked module called "g_ether".
631 select USB_LIBCOMPOSITE
634 Microsoft Windows XP bundles the "Remote NDIS" (RNDIS) protocol,
635 and Microsoft provides redistributable binary RNDIS drivers for
636 older versions of Windows.
638 If you say "y" here, the Ethernet gadget driver will try to provide
639 a second device configuration, supporting RNDIS to talk to such
642 To make MS-Windows work with this, use Documentation/usb/linux.inf
643 as the "driver info file". For versions of MS-Windows older than
644 XP, you'll need to download drivers from Microsoft's website; a URL
645 is given in comments found in that info file.
648 bool "Ethernet Emulation Model (EEM) support"
650 select USB_LIBCOMPOSITE
653 CDC EEM is a newer USB standard that is somewhat simpler than CDC ECM
654 and therefore can be supported by more hardware. Technically ECM and
655 EEM are designed for different applications. The ECM model extends
656 the network interface to the target (e.g. a USB cable modem), and the
657 EEM model is for mobile devices to communicate with hosts using
658 ethernet over USB. For Linux gadgets, however, the interface with
659 the host is the same (a usbX device), so the differences are minimal.
661 If you say "y" here, the Ethernet gadget driver will use the EEM
662 protocol rather than ECM. If unsure, say "n".
665 tristate "Network Control Model (NCM) support"
667 select USB_LIBCOMPOSITE
670 This driver implements USB CDC NCM subclass standard. NCM is
671 an advanced protocol for Ethernet encapsulation, allows grouping
672 of several ethernet frames into one USB transfer and different
673 alignment possibilities.
675 Say "y" to link the driver statically, or "m" to build a
676 dynamically linked module called "g_ncm".
679 tristate "Gadget Filesystem"
681 This driver provides a filesystem based API that lets user mode
682 programs implement a single-configuration USB device, including
683 endpoint I/O and control requests that don't relate to enumeration.
684 All endpoints, transfer speeds, and transfer types supported by
685 the hardware are available, through read() and write() calls.
687 Say "y" to link the driver statically, or "m" to build a
688 dynamically linked module called "gadgetfs".
690 config USB_FUNCTIONFS
691 tristate "Function Filesystem"
692 select USB_LIBCOMPOSITE
693 select USB_FUNCTIONFS_GENERIC if !(USB_FUNCTIONFS_ETH || USB_FUNCTIONFS_RNDIS)
695 The Function Filesystem (FunctionFS) lets one create USB
696 composite functions in user space in the same way GadgetFS
697 lets one create USB gadgets in user space. This allows creation
698 of composite gadgets such that some of the functions are
699 implemented in kernel space (for instance Ethernet, serial or
700 mass storage) and other are implemented in user space.
702 If you say "y" or "m" here you will be able what kind of
703 configurations the gadget will provide.
705 Say "y" to link the driver statically, or "m" to build
706 a dynamically linked module called "g_ffs".
708 config USB_FUNCTIONFS_ETH
709 bool "Include configuration with CDC ECM (Ethernet)"
710 depends on USB_FUNCTIONFS && NET
712 Include a configuration with CDC ECM function (Ethernet) and the
715 config USB_FUNCTIONFS_RNDIS
716 bool "Include configuration with RNDIS (Ethernet)"
717 depends on USB_FUNCTIONFS && NET
719 Include a configuration with RNDIS function (Ethernet) and the Filesystem.
721 config USB_FUNCTIONFS_GENERIC
722 bool "Include 'pure' configuration"
723 depends on USB_FUNCTIONFS
725 Include a configuration with the Function Filesystem alone with
726 no Ethernet interface.
728 config USB_MASS_STORAGE
729 tristate "Mass Storage Gadget"
731 select USB_LIBCOMPOSITE
733 The Mass Storage Gadget acts as a USB Mass Storage disk drive.
734 As its storage repository it can use a regular file or a block
735 device (in much the same way as the "loop" device driver),
736 specified as a module parameter or sysfs option.
738 This driver is a replacement for now removed File-backed
739 Storage Gadget (g_file_storage).
741 Say "y" to link the driver statically, or "m" to build
742 a dynamically linked module called "g_mass_storage".
744 config USB_GADGET_TARGET
745 tristate "USB Gadget Target Fabric Module"
746 depends on TARGET_CORE
747 select USB_LIBCOMPOSITE
749 This fabric is an USB gadget. Two USB protocols are supported that is
750 BBB or BOT (Bulk Only Transport) and UAS (USB Attached SCSI). BOT is
751 advertised on alternative interface 0 (primary) and UAS is on
752 alternative interface 1. Both protocols can work on USB2.0 and USB3.0.
753 UAS utilizes the USB 3.0 feature called streams support.
756 tristate "Serial Gadget (with CDC ACM and CDC OBEX support)"
757 select USB_LIBCOMPOSITE
759 The Serial Gadget talks to the Linux-USB generic serial driver.
760 This driver supports a CDC-ACM module option, which can be used
761 to interoperate with MS-Windows hosts or with the Linux-USB
764 This driver also supports a CDC-OBEX option. You will need a
765 user space OBEX server talking to /dev/ttyGS*, since the kernel
766 itself doesn't implement the OBEX protocol.
768 Say "y" to link the driver statically, or "m" to build a
769 dynamically linked module called "g_serial".
771 For more information, see Documentation/usb/gadget_serial.txt
772 which includes instructions and a "driver info file" needed to
773 make MS-Windows work with CDC ACM.
775 config USB_MIDI_GADGET
776 tristate "MIDI Gadget"
778 select USB_LIBCOMPOSITE
781 The MIDI Gadget acts as a USB Audio device, with one MIDI
782 input and one MIDI output. These MIDI jacks appear as
783 a sound "card" in the ALSA sound system. Other MIDI
784 connections can then be made on the gadget system, using
785 ALSA's aconnect utility etc.
787 Say "y" to link the driver statically, or "m" to build a
788 dynamically linked module called "g_midi".
791 tristate "Printer Gadget"
792 select USB_LIBCOMPOSITE
794 The Printer Gadget channels data between the USB host and a
795 userspace program driving the print engine. The user space
796 program reads and writes the device file /dev/g_printer to
797 receive or send printer data. It can use ioctl calls to
798 the device file to get or set printer status.
800 Say "y" to link the driver statically, or "m" to build a
801 dynamically linked module called "g_printer".
803 For more information, see Documentation/usb/gadget_printer.txt
804 which includes sample code for accessing the device file.
806 config USB_CDC_COMPOSITE
807 tristate "CDC Composite Device (Ethernet and ACM)"
809 select USB_LIBCOMPOSITE
811 This driver provides two functions in one configuration:
812 a CDC Ethernet (ECM) link, and a CDC ACM (serial port) link.
814 This driver requires four bulk and two interrupt endpoints,
815 plus the ability to handle altsettings. Not all peripheral
816 controllers are that capable.
818 Say "y" to link the driver statically, or "m" to build a
819 dynamically linked module.
822 tristate "Nokia composite gadget"
824 select USB_LIBCOMPOSITE
826 The Nokia composite gadget provides support for acm, obex
827 and phonet in only one composite gadget driver.
829 It's only really useful for N900 hardware. If you're building
830 a kernel for N900, say Y or M here. If unsure, say N.
833 tristate "CDC Composite Device (ACM and mass storage)"
835 select USB_LIBCOMPOSITE
837 This driver provides two functions in one configuration:
838 a mass storage, and a CDC ACM (serial port) link.
840 Say "y" to link the driver statically, or "m" to build a
841 dynamically linked module called "g_acm_ms".
844 tristate "Multifunction Composite Gadget"
845 depends on BLOCK && NET
846 select USB_G_MULTI_CDC if !USB_G_MULTI_RNDIS
847 select USB_LIBCOMPOSITE
849 The Multifunction Composite Gadget provides Ethernet (RNDIS
850 and/or CDC Ethernet), mass storage and ACM serial link
853 You will be asked to choose which of the two configurations is
854 to be available in the gadget. At least one configuration must
855 be chosen to make the gadget usable. Selecting more than one
856 configuration will prevent Windows from automatically detecting
857 the gadget as a composite gadget, so an INF file will be needed to
860 Say "y" to link the driver statically, or "m" to build a
861 dynamically linked module called "g_multi".
863 config USB_G_MULTI_RNDIS
864 bool "RNDIS + CDC Serial + Storage configuration"
865 depends on USB_G_MULTI
868 This option enables a configuration with RNDIS, CDC Serial and
869 Mass Storage functions available in the Multifunction Composite
870 Gadget. This is the configuration dedicated for Windows since RNDIS
871 is Microsoft's protocol.
875 config USB_G_MULTI_CDC
876 bool "CDC Ethernet + CDC Serial + Storage configuration"
877 depends on USB_G_MULTI
880 This option enables a configuration with CDC Ethernet (ECM), CDC
881 Serial and Mass Storage functions available in the Multifunction
887 tristate "HID Gadget"
888 select USB_LIBCOMPOSITE
890 The HID gadget driver provides generic emulation of USB
891 Human Interface Devices (HID).
893 For more information, see Documentation/usb/gadget_hid.txt which
894 includes sample code for accessing the device files.
896 Say "y" to link the driver statically, or "m" to build a
897 dynamically linked module called "g_hid".
899 # Standalone / single function gadgets
901 tristate "EHCI Debug Device Gadget"
902 select USB_LIBCOMPOSITE
904 This gadget emulates an EHCI Debug device. This is useful when you want
905 to interact with an EHCI Debug Port.
907 Say "y" to link the driver statically, or "m" to build a
908 dynamically linked module called "g_dbgp".
912 prompt "EHCI Debug Device mode"
913 default USB_G_DBGP_SERIAL
915 config USB_G_DBGP_PRINTK
916 depends on USB_G_DBGP
919 Directly printk() received data. No interaction.
921 config USB_G_DBGP_SERIAL
922 depends on USB_G_DBGP
925 Userland can interact using /dev/ttyGSxxx.
929 # put drivers that need isochronous transfer support (for audio
930 # or video class gadget drivers), or specific hardware, here.
932 tristate "USB Webcam Gadget"
934 select USB_LIBCOMPOSITE
936 The Webcam Gadget acts as a composite USB Audio and Video Class
937 device. It provides a userspace API to process UVC control requests
938 and stream video data to the host.
940 Say "y" to link the driver statically, or "m" to build a
941 dynamically linked module called "g_webcam".