2 * dummy_hcd.c -- Dummy/Loopback USB host and device emulator driver.
4 * Maintainer: Alan Stern <stern@rowland.harvard.edu>
6 * Copyright (C) 2003 David Brownell
7 * Copyright (C) 2003-2005 Alan Stern
9 * This program is free software; you can redistribute it and/or modify
10 * it under the terms of the GNU General Public License as published by
11 * the Free Software Foundation; either version 2 of the License, or
12 * (at your option) any later version.
17 * This exposes a device side "USB gadget" API, driven by requests to a
18 * Linux-USB host controller driver. USB traffic is simulated; there's
19 * no need for USB hardware. Use this with two other drivers:
21 * - Gadget driver, responding to requests (slave);
22 * - Host-side device driver, as already familiar in Linux.
24 * Having this all in one kernel can help some stages of development,
25 * bypassing some hardware (and driver) issues. UML could help too.
28 #include <linux/module.h>
29 #include <linux/kernel.h>
30 #include <linux/delay.h>
31 #include <linux/ioport.h>
32 #include <linux/slab.h>
33 #include <linux/errno.h>
34 #include <linux/init.h>
35 #include <linux/timer.h>
36 #include <linux/list.h>
37 #include <linux/interrupt.h>
38 #include <linux/platform_device.h>
39 #include <linux/usb.h>
40 #include <linux/usb/gadget.h>
41 #include <linux/usb/hcd.h>
42 #include <linux/scatterlist.h>
44 #include <asm/byteorder.h>
47 #include <asm/unaligned.h>
49 #define DRIVER_DESC "USB Host+Gadget Emulator"
50 #define DRIVER_VERSION "02 May 2005"
52 #define POWER_BUDGET 500 /* in mA; use 8 for low-power port testing */
54 static const char driver_name
[] = "dummy_hcd";
55 static const char driver_desc
[] = "USB Host+Gadget Emulator";
57 static const char gadget_name
[] = "dummy_udc";
59 MODULE_DESCRIPTION(DRIVER_DESC
);
60 MODULE_AUTHOR("David Brownell");
61 MODULE_LICENSE("GPL");
63 struct dummy_hcd_module_parameters
{
69 static struct dummy_hcd_module_parameters mod_data
= {
70 .is_super_speed
= false,
71 .is_high_speed
= true,
74 module_param_named(is_super_speed
, mod_data
.is_super_speed
, bool, S_IRUGO
);
75 MODULE_PARM_DESC(is_super_speed
, "true to simulate SuperSpeed connection");
76 module_param_named(is_high_speed
, mod_data
.is_high_speed
, bool, S_IRUGO
);
77 MODULE_PARM_DESC(is_high_speed
, "true to simulate HighSpeed connection");
78 module_param_named(num
, mod_data
.num
, uint
, S_IRUGO
);
79 MODULE_PARM_DESC(num
, "number of emulated controllers");
80 /*-------------------------------------------------------------------------*/
82 /* gadget side driver data structres */
84 struct list_head queue
;
85 unsigned long last_io
; /* jiffies timestamp */
86 struct usb_gadget
*gadget
;
87 const struct usb_endpoint_descriptor
*desc
;
91 unsigned already_seen
:1;
92 unsigned setup_stage
:1;
96 struct dummy_request
{
97 struct list_head queue
; /* ep's requests */
98 struct usb_request req
;
101 static inline struct dummy_ep
*usb_ep_to_dummy_ep(struct usb_ep
*_ep
)
103 return container_of(_ep
, struct dummy_ep
, ep
);
106 static inline struct dummy_request
*usb_request_to_dummy_request
107 (struct usb_request
*_req
)
109 return container_of(_req
, struct dummy_request
, req
);
112 /*-------------------------------------------------------------------------*/
115 * Every device has ep0 for control requests, plus up to 30 more endpoints,
116 * in one of two types:
118 * - Configurable: direction (in/out), type (bulk, iso, etc), and endpoint
119 * number can be changed. Names like "ep-a" are used for this type.
121 * - Fixed Function: in other cases. some characteristics may be mutable;
122 * that'd be hardware-specific. Names like "ep12out-bulk" are used.
124 * Gadget drivers are responsible for not setting up conflicting endpoint
125 * configurations, illegal or unsupported packet lengths, and so on.
128 static const char ep0name
[] = "ep0";
130 static const char *const ep_name
[] = {
131 ep0name
, /* everyone has ep0 */
133 /* act like a pxa250: fifteen fixed function endpoints */
134 "ep1in-bulk", "ep2out-bulk", "ep3in-iso", "ep4out-iso", "ep5in-int",
135 "ep6in-bulk", "ep7out-bulk", "ep8in-iso", "ep9out-iso", "ep10in-int",
136 "ep11in-bulk", "ep12out-bulk", "ep13in-iso", "ep14out-iso",
139 /* or like sa1100: two fixed function endpoints */
140 "ep1out-bulk", "ep2in-bulk",
142 /* and now some generic EPs so we have enough in multi config */
143 "ep3out", "ep4in", "ep5out", "ep6out", "ep7in", "ep8out", "ep9in",
144 "ep10out", "ep11out", "ep12in", "ep13out", "ep14in", "ep15out",
146 #define DUMMY_ENDPOINTS ARRAY_SIZE(ep_name)
148 /*-------------------------------------------------------------------------*/
154 struct list_head urbp_list
;
155 struct sg_mapping_iter miter
;
160 enum dummy_rh_state
{
168 enum dummy_rh_state rh_state
;
169 struct timer_list timer
;
172 unsigned long re_timeout
;
174 struct usb_device
*udev
;
175 struct list_head urbp_list
;
177 u8 num_stream
[30 / 2];
180 unsigned old_active
:1;
188 * SLAVE/GADGET side support
190 struct dummy_ep ep
[DUMMY_ENDPOINTS
];
192 struct usb_gadget gadget
;
193 struct usb_gadget_driver
*driver
;
194 struct dummy_request fifo_req
;
195 u8 fifo_buf
[FIFO_SIZE
];
197 unsigned udc_suspended
:1;
201 * MASTER/HOST side support
203 struct dummy_hcd
*hs_hcd
;
204 struct dummy_hcd
*ss_hcd
;
207 static inline struct dummy_hcd
*hcd_to_dummy_hcd(struct usb_hcd
*hcd
)
209 return (struct dummy_hcd
*) (hcd
->hcd_priv
);
212 static inline struct usb_hcd
*dummy_hcd_to_hcd(struct dummy_hcd
*dum
)
214 return container_of((void *) dum
, struct usb_hcd
, hcd_priv
);
217 static inline struct device
*dummy_dev(struct dummy_hcd
*dum
)
219 return dummy_hcd_to_hcd(dum
)->self
.controller
;
222 static inline struct device
*udc_dev(struct dummy
*dum
)
224 return dum
->gadget
.dev
.parent
;
227 static inline struct dummy
*ep_to_dummy(struct dummy_ep
*ep
)
229 return container_of(ep
->gadget
, struct dummy
, gadget
);
232 static inline struct dummy_hcd
*gadget_to_dummy_hcd(struct usb_gadget
*gadget
)
234 struct dummy
*dum
= container_of(gadget
, struct dummy
, gadget
);
235 if (dum
->gadget
.speed
== USB_SPEED_SUPER
)
241 static inline struct dummy
*gadget_dev_to_dummy(struct device
*dev
)
243 return container_of(dev
, struct dummy
, gadget
.dev
);
246 /*-------------------------------------------------------------------------*/
248 /* SLAVE/GADGET SIDE UTILITY ROUTINES */
250 /* called with spinlock held */
251 static void nuke(struct dummy
*dum
, struct dummy_ep
*ep
)
253 while (!list_empty(&ep
->queue
)) {
254 struct dummy_request
*req
;
256 req
= list_entry(ep
->queue
.next
, struct dummy_request
, queue
);
257 list_del_init(&req
->queue
);
258 req
->req
.status
= -ESHUTDOWN
;
260 spin_unlock(&dum
->lock
);
261 req
->req
.complete(&ep
->ep
, &req
->req
);
262 spin_lock(&dum
->lock
);
266 /* caller must hold lock */
267 static void stop_activity(struct dummy
*dum
)
271 /* prevent any more requests */
274 /* The timer is left running so that outstanding URBs can fail */
276 /* nuke any pending requests first, so driver i/o is quiesced */
277 list_for_each_entry(ep
, &dum
->gadget
.ep_list
, ep
.ep_list
)
280 /* driver now does any non-usb quiescing necessary */
284 * set_link_state_by_speed() - Sets the current state of the link according to
286 * @dum_hcd: pointer to the dummy_hcd structure to update the link state for
288 * This function updates the port_status according to the link state and the
291 static void set_link_state_by_speed(struct dummy_hcd
*dum_hcd
)
293 struct dummy
*dum
= dum_hcd
->dum
;
295 if (dummy_hcd_to_hcd(dum_hcd
)->speed
== HCD_USB3
) {
296 if ((dum_hcd
->port_status
& USB_SS_PORT_STAT_POWER
) == 0) {
297 dum_hcd
->port_status
= 0;
298 } else if (!dum
->pullup
|| dum
->udc_suspended
) {
299 /* UDC suspend must cause a disconnect */
300 dum_hcd
->port_status
&= ~(USB_PORT_STAT_CONNECTION
|
301 USB_PORT_STAT_ENABLE
);
302 if ((dum_hcd
->old_status
&
303 USB_PORT_STAT_CONNECTION
) != 0)
304 dum_hcd
->port_status
|=
305 (USB_PORT_STAT_C_CONNECTION
<< 16);
307 /* device is connected and not suspended */
308 dum_hcd
->port_status
|= (USB_PORT_STAT_CONNECTION
|
309 USB_PORT_STAT_SPEED_5GBPS
) ;
310 if ((dum_hcd
->old_status
&
311 USB_PORT_STAT_CONNECTION
) == 0)
312 dum_hcd
->port_status
|=
313 (USB_PORT_STAT_C_CONNECTION
<< 16);
314 if ((dum_hcd
->port_status
&
315 USB_PORT_STAT_ENABLE
) == 1 &&
316 (dum_hcd
->port_status
&
317 USB_SS_PORT_LS_U0
) == 1 &&
318 dum_hcd
->rh_state
!= DUMMY_RH_SUSPENDED
)
322 if ((dum_hcd
->port_status
& USB_PORT_STAT_POWER
) == 0) {
323 dum_hcd
->port_status
= 0;
324 } else if (!dum
->pullup
|| dum
->udc_suspended
) {
325 /* UDC suspend must cause a disconnect */
326 dum_hcd
->port_status
&= ~(USB_PORT_STAT_CONNECTION
|
327 USB_PORT_STAT_ENABLE
|
328 USB_PORT_STAT_LOW_SPEED
|
329 USB_PORT_STAT_HIGH_SPEED
|
330 USB_PORT_STAT_SUSPEND
);
331 if ((dum_hcd
->old_status
&
332 USB_PORT_STAT_CONNECTION
) != 0)
333 dum_hcd
->port_status
|=
334 (USB_PORT_STAT_C_CONNECTION
<< 16);
336 dum_hcd
->port_status
|= USB_PORT_STAT_CONNECTION
;
337 if ((dum_hcd
->old_status
&
338 USB_PORT_STAT_CONNECTION
) == 0)
339 dum_hcd
->port_status
|=
340 (USB_PORT_STAT_C_CONNECTION
<< 16);
341 if ((dum_hcd
->port_status
& USB_PORT_STAT_ENABLE
) == 0)
342 dum_hcd
->port_status
&= ~USB_PORT_STAT_SUSPEND
;
343 else if ((dum_hcd
->port_status
&
344 USB_PORT_STAT_SUSPEND
) == 0 &&
345 dum_hcd
->rh_state
!= DUMMY_RH_SUSPENDED
)
351 /* caller must hold lock */
352 static void set_link_state(struct dummy_hcd
*dum_hcd
)
354 struct dummy
*dum
= dum_hcd
->dum
;
358 if ((dummy_hcd_to_hcd(dum_hcd
)->speed
== HCD_USB3
&&
359 dum
->gadget
.speed
!= USB_SPEED_SUPER
) ||
360 (dummy_hcd_to_hcd(dum_hcd
)->speed
!= HCD_USB3
&&
361 dum
->gadget
.speed
== USB_SPEED_SUPER
))
364 set_link_state_by_speed(dum_hcd
);
366 if ((dum_hcd
->port_status
& USB_PORT_STAT_ENABLE
) == 0 ||
368 dum_hcd
->resuming
= 0;
370 /* if !connected or reset */
371 if ((dum_hcd
->port_status
& USB_PORT_STAT_CONNECTION
) == 0 ||
372 (dum_hcd
->port_status
& USB_PORT_STAT_RESET
) != 0) {
374 * We're connected and not reset (reset occurred now),
375 * and driver attached - disconnect!
377 if ((dum_hcd
->old_status
& USB_PORT_STAT_CONNECTION
) != 0 &&
378 (dum_hcd
->old_status
& USB_PORT_STAT_RESET
) == 0 &&
381 spin_unlock(&dum
->lock
);
382 dum
->driver
->disconnect(&dum
->gadget
);
383 spin_lock(&dum
->lock
);
385 } else if (dum_hcd
->active
!= dum_hcd
->old_active
) {
386 if (dum_hcd
->old_active
&& dum
->driver
->suspend
) {
387 spin_unlock(&dum
->lock
);
388 dum
->driver
->suspend(&dum
->gadget
);
389 spin_lock(&dum
->lock
);
390 } else if (!dum_hcd
->old_active
&& dum
->driver
->resume
) {
391 spin_unlock(&dum
->lock
);
392 dum
->driver
->resume(&dum
->gadget
);
393 spin_lock(&dum
->lock
);
397 dum_hcd
->old_status
= dum_hcd
->port_status
;
398 dum_hcd
->old_active
= dum_hcd
->active
;
401 /*-------------------------------------------------------------------------*/
403 /* SLAVE/GADGET SIDE DRIVER
405 * This only tracks gadget state. All the work is done when the host
406 * side tries some (emulated) i/o operation. Real device controller
407 * drivers would do real i/o using dma, fifos, irqs, timers, etc.
410 #define is_enabled(dum) \
411 (dum->port_status & USB_PORT_STAT_ENABLE)
413 static int dummy_enable(struct usb_ep
*_ep
,
414 const struct usb_endpoint_descriptor
*desc
)
417 struct dummy_hcd
*dum_hcd
;
422 ep
= usb_ep_to_dummy_ep(_ep
);
423 if (!_ep
|| !desc
|| ep
->desc
|| _ep
->name
== ep0name
424 || desc
->bDescriptorType
!= USB_DT_ENDPOINT
)
426 dum
= ep_to_dummy(ep
);
430 dum_hcd
= gadget_to_dummy_hcd(&dum
->gadget
);
431 if (!is_enabled(dum_hcd
))
435 * For HS/FS devices only bits 0..10 of the wMaxPacketSize represent the
436 * maximum packet size.
437 * For SS devices the wMaxPacketSize is limited by 1024.
439 max
= usb_endpoint_maxp(desc
) & 0x7ff;
441 /* drivers must not request bad settings, since lower levels
442 * (hardware or its drivers) may not check. some endpoints
443 * can't do iso, many have maxpacket limitations, etc.
445 * since this "hardware" driver is here to help debugging, we
446 * have some extra sanity checks. (there could be more though,
447 * especially for "ep9out" style fixed function ones.)
450 switch (usb_endpoint_type(desc
)) {
451 case USB_ENDPOINT_XFER_BULK
:
452 if (strstr(ep
->ep
.name
, "-iso")
453 || strstr(ep
->ep
.name
, "-int")) {
456 switch (dum
->gadget
.speed
) {
457 case USB_SPEED_SUPER
:
466 if (max
== 8 || max
== 16 || max
== 32 || max
== 64)
467 /* we'll fake any legal size */
469 /* save a return statement */
474 case USB_ENDPOINT_XFER_INT
:
475 if (strstr(ep
->ep
.name
, "-iso")) /* bulk is ok */
477 /* real hardware might not handle all packet sizes */
478 switch (dum
->gadget
.speed
) {
479 case USB_SPEED_SUPER
:
483 /* save a return statement */
487 /* save a return statement */
494 case USB_ENDPOINT_XFER_ISOC
:
495 if (strstr(ep
->ep
.name
, "-bulk")
496 || strstr(ep
->ep
.name
, "-int"))
498 /* real hardware might not handle all packet sizes */
499 switch (dum
->gadget
.speed
) {
500 case USB_SPEED_SUPER
:
504 /* save a return statement */
508 /* save a return statement */
514 /* few chips support control except on ep0 */
518 _ep
->maxpacket
= max
;
519 if (usb_ss_max_streams(_ep
->comp_desc
)) {
520 if (!usb_endpoint_xfer_bulk(desc
)) {
521 dev_err(udc_dev(dum
), "Can't enable stream support on "
522 "non-bulk ep %s\n", _ep
->name
);
529 dev_dbg(udc_dev(dum
), "enabled %s (ep%d%s-%s) maxpacket %d stream %s\n",
531 desc
->bEndpointAddress
& 0x0f,
532 (desc
->bEndpointAddress
& USB_DIR_IN
) ? "in" : "out",
534 switch (usb_endpoint_type(desc
)) {
535 case USB_ENDPOINT_XFER_BULK
:
538 case USB_ENDPOINT_XFER_ISOC
:
541 case USB_ENDPOINT_XFER_INT
:
548 max
, ep
->stream_en
? "enabled" : "disabled");
550 /* at this point real hardware should be NAKing transfers
551 * to that endpoint, until a buffer is queued to it.
553 ep
->halted
= ep
->wedged
= 0;
559 static int dummy_disable(struct usb_ep
*_ep
)
565 ep
= usb_ep_to_dummy_ep(_ep
);
566 if (!_ep
|| !ep
->desc
|| _ep
->name
== ep0name
)
568 dum
= ep_to_dummy(ep
);
570 spin_lock_irqsave(&dum
->lock
, flags
);
574 spin_unlock_irqrestore(&dum
->lock
, flags
);
576 dev_dbg(udc_dev(dum
), "disabled %s\n", _ep
->name
);
580 static struct usb_request
*dummy_alloc_request(struct usb_ep
*_ep
,
584 struct dummy_request
*req
;
588 ep
= usb_ep_to_dummy_ep(_ep
);
590 req
= kzalloc(sizeof(*req
), mem_flags
);
593 INIT_LIST_HEAD(&req
->queue
);
597 static void dummy_free_request(struct usb_ep
*_ep
, struct usb_request
*_req
)
599 struct dummy_request
*req
;
606 req
= usb_request_to_dummy_request(_req
);
607 WARN_ON(!list_empty(&req
->queue
));
611 static void fifo_complete(struct usb_ep
*ep
, struct usb_request
*req
)
615 static int dummy_queue(struct usb_ep
*_ep
, struct usb_request
*_req
,
619 struct dummy_request
*req
;
621 struct dummy_hcd
*dum_hcd
;
624 req
= usb_request_to_dummy_request(_req
);
625 if (!_req
|| !list_empty(&req
->queue
) || !_req
->complete
)
628 ep
= usb_ep_to_dummy_ep(_ep
);
629 if (!_ep
|| (!ep
->desc
&& _ep
->name
!= ep0name
))
632 dum
= ep_to_dummy(ep
);
633 dum_hcd
= gadget_to_dummy_hcd(&dum
->gadget
);
634 if (!dum
->driver
|| !is_enabled(dum_hcd
))
638 dev_dbg(udc_dev(dum
), "ep %p queue req %p to %s, len %d buf %p\n",
639 ep
, _req
, _ep
->name
, _req
->length
, _req
->buf
);
641 _req
->status
= -EINPROGRESS
;
643 spin_lock_irqsave(&dum
->lock
, flags
);
645 /* implement an emulated single-request FIFO */
646 if (ep
->desc
&& (ep
->desc
->bEndpointAddress
& USB_DIR_IN
) &&
647 list_empty(&dum
->fifo_req
.queue
) &&
648 list_empty(&ep
->queue
) &&
649 _req
->length
<= FIFO_SIZE
) {
650 req
= &dum
->fifo_req
;
652 req
->req
.buf
= dum
->fifo_buf
;
653 memcpy(dum
->fifo_buf
, _req
->buf
, _req
->length
);
654 req
->req
.context
= dum
;
655 req
->req
.complete
= fifo_complete
;
657 list_add_tail(&req
->queue
, &ep
->queue
);
658 spin_unlock(&dum
->lock
);
659 _req
->actual
= _req
->length
;
661 _req
->complete(_ep
, _req
);
662 spin_lock(&dum
->lock
);
664 list_add_tail(&req
->queue
, &ep
->queue
);
665 spin_unlock_irqrestore(&dum
->lock
, flags
);
667 /* real hardware would likely enable transfers here, in case
668 * it'd been left NAKing.
673 static int dummy_dequeue(struct usb_ep
*_ep
, struct usb_request
*_req
)
677 int retval
= -EINVAL
;
679 struct dummy_request
*req
= NULL
;
683 ep
= usb_ep_to_dummy_ep(_ep
);
684 dum
= ep_to_dummy(ep
);
689 local_irq_save(flags
);
690 spin_lock(&dum
->lock
);
691 list_for_each_entry(req
, &ep
->queue
, queue
) {
692 if (&req
->req
== _req
) {
693 list_del_init(&req
->queue
);
694 _req
->status
= -ECONNRESET
;
699 spin_unlock(&dum
->lock
);
702 dev_dbg(udc_dev(dum
),
703 "dequeued req %p from %s, len %d buf %p\n",
704 req
, _ep
->name
, _req
->length
, _req
->buf
);
705 _req
->complete(_ep
, _req
);
707 local_irq_restore(flags
);
712 dummy_set_halt_and_wedge(struct usb_ep
*_ep
, int value
, int wedged
)
719 ep
= usb_ep_to_dummy_ep(_ep
);
720 dum
= ep_to_dummy(ep
);
724 ep
->halted
= ep
->wedged
= 0;
725 else if (ep
->desc
&& (ep
->desc
->bEndpointAddress
& USB_DIR_IN
) &&
726 !list_empty(&ep
->queue
))
733 /* FIXME clear emulated data toggle too */
738 dummy_set_halt(struct usb_ep
*_ep
, int value
)
740 return dummy_set_halt_and_wedge(_ep
, value
, 0);
743 static int dummy_set_wedge(struct usb_ep
*_ep
)
745 if (!_ep
|| _ep
->name
== ep0name
)
747 return dummy_set_halt_and_wedge(_ep
, 1, 1);
750 static const struct usb_ep_ops dummy_ep_ops
= {
751 .enable
= dummy_enable
,
752 .disable
= dummy_disable
,
754 .alloc_request
= dummy_alloc_request
,
755 .free_request
= dummy_free_request
,
757 .queue
= dummy_queue
,
758 .dequeue
= dummy_dequeue
,
760 .set_halt
= dummy_set_halt
,
761 .set_wedge
= dummy_set_wedge
,
764 /*-------------------------------------------------------------------------*/
766 /* there are both host and device side versions of this call ... */
767 static int dummy_g_get_frame(struct usb_gadget
*_gadget
)
771 do_gettimeofday(&tv
);
772 return tv
.tv_usec
/ 1000;
775 static int dummy_wakeup(struct usb_gadget
*_gadget
)
777 struct dummy_hcd
*dum_hcd
;
779 dum_hcd
= gadget_to_dummy_hcd(_gadget
);
780 if (!(dum_hcd
->dum
->devstatus
& ((1 << USB_DEVICE_B_HNP_ENABLE
)
781 | (1 << USB_DEVICE_REMOTE_WAKEUP
))))
783 if ((dum_hcd
->port_status
& USB_PORT_STAT_CONNECTION
) == 0)
785 if ((dum_hcd
->port_status
& USB_PORT_STAT_SUSPEND
) == 0 &&
786 dum_hcd
->rh_state
!= DUMMY_RH_SUSPENDED
)
789 /* FIXME: What if the root hub is suspended but the port isn't? */
791 /* hub notices our request, issues downstream resume, etc */
792 dum_hcd
->resuming
= 1;
793 dum_hcd
->re_timeout
= jiffies
+ msecs_to_jiffies(20);
794 mod_timer(&dummy_hcd_to_hcd(dum_hcd
)->rh_timer
, dum_hcd
->re_timeout
);
798 static int dummy_set_selfpowered(struct usb_gadget
*_gadget
, int value
)
802 dum
= gadget_to_dummy_hcd(_gadget
)->dum
;
804 dum
->devstatus
|= (1 << USB_DEVICE_SELF_POWERED
);
806 dum
->devstatus
&= ~(1 << USB_DEVICE_SELF_POWERED
);
810 static void dummy_udc_update_ep0(struct dummy
*dum
)
812 if (dum
->gadget
.speed
== USB_SPEED_SUPER
)
813 dum
->ep
[0].ep
.maxpacket
= 9;
815 dum
->ep
[0].ep
.maxpacket
= 64;
818 static int dummy_pullup(struct usb_gadget
*_gadget
, int value
)
820 struct dummy_hcd
*dum_hcd
;
824 dum
= gadget_dev_to_dummy(&_gadget
->dev
);
826 if (value
&& dum
->driver
) {
827 if (mod_data
.is_super_speed
)
828 dum
->gadget
.speed
= dum
->driver
->max_speed
;
829 else if (mod_data
.is_high_speed
)
830 dum
->gadget
.speed
= min_t(u8
, USB_SPEED_HIGH
,
831 dum
->driver
->max_speed
);
833 dum
->gadget
.speed
= USB_SPEED_FULL
;
834 dummy_udc_update_ep0(dum
);
836 if (dum
->gadget
.speed
< dum
->driver
->max_speed
)
837 dev_dbg(udc_dev(dum
), "This device can perform faster"
838 " if you connect it to a %s port...\n",
839 usb_speed_string(dum
->driver
->max_speed
));
841 dum_hcd
= gadget_to_dummy_hcd(_gadget
);
843 spin_lock_irqsave(&dum
->lock
, flags
);
844 dum
->pullup
= (value
!= 0);
845 set_link_state(dum_hcd
);
846 spin_unlock_irqrestore(&dum
->lock
, flags
);
848 usb_hcd_poll_rh_status(dummy_hcd_to_hcd(dum_hcd
));
852 static int dummy_udc_start(struct usb_gadget
*g
,
853 struct usb_gadget_driver
*driver
);
854 static int dummy_udc_stop(struct usb_gadget
*g
,
855 struct usb_gadget_driver
*driver
);
857 static const struct usb_gadget_ops dummy_ops
= {
858 .get_frame
= dummy_g_get_frame
,
859 .wakeup
= dummy_wakeup
,
860 .set_selfpowered
= dummy_set_selfpowered
,
861 .pullup
= dummy_pullup
,
862 .udc_start
= dummy_udc_start
,
863 .udc_stop
= dummy_udc_stop
,
866 /*-------------------------------------------------------------------------*/
868 /* "function" sysfs attribute */
869 static ssize_t
function_show(struct device
*dev
, struct device_attribute
*attr
,
872 struct dummy
*dum
= gadget_dev_to_dummy(dev
);
874 if (!dum
->driver
|| !dum
->driver
->function
)
876 return scnprintf(buf
, PAGE_SIZE
, "%s\n", dum
->driver
->function
);
878 static DEVICE_ATTR_RO(function
);
880 /*-------------------------------------------------------------------------*/
883 * Driver registration/unregistration.
885 * This is basically hardware-specific; there's usually only one real USB
886 * device (not host) controller since that's how USB devices are intended
887 * to work. So most implementations of these api calls will rely on the
888 * fact that only one driver will ever bind to the hardware. But curious
889 * hardware can be built with discrete components, so the gadget API doesn't
890 * require that assumption.
892 * For this emulator, it might be convenient to create a usb slave device
893 * for each driver that registers: just add to a big root hub.
896 static int dummy_udc_start(struct usb_gadget
*g
,
897 struct usb_gadget_driver
*driver
)
899 struct dummy_hcd
*dum_hcd
= gadget_to_dummy_hcd(g
);
900 struct dummy
*dum
= dum_hcd
->dum
;
902 if (driver
->max_speed
== USB_SPEED_UNKNOWN
)
906 * SLAVE side init ... the layer above hardware, which
907 * can't enumerate without help from the driver we're binding.
912 dum
->driver
= driver
;
913 dev_dbg(udc_dev(dum
), "binding gadget driver '%s'\n",
914 driver
->driver
.name
);
918 static int dummy_udc_stop(struct usb_gadget
*g
,
919 struct usb_gadget_driver
*driver
)
921 struct dummy_hcd
*dum_hcd
= gadget_to_dummy_hcd(g
);
922 struct dummy
*dum
= dum_hcd
->dum
;
925 dev_dbg(udc_dev(dum
), "unregister gadget driver '%s'\n",
926 driver
->driver
.name
);
935 /* The gadget structure is stored inside the hcd structure and will be
936 * released along with it. */
937 static void init_dummy_udc_hw(struct dummy
*dum
)
941 INIT_LIST_HEAD(&dum
->gadget
.ep_list
);
942 for (i
= 0; i
< DUMMY_ENDPOINTS
; i
++) {
943 struct dummy_ep
*ep
= &dum
->ep
[i
];
947 ep
->ep
.name
= ep_name
[i
];
948 ep
->ep
.ops
= &dummy_ep_ops
;
949 list_add_tail(&ep
->ep
.ep_list
, &dum
->gadget
.ep_list
);
950 ep
->halted
= ep
->wedged
= ep
->already_seen
=
952 usb_ep_set_maxpacket_limit(&ep
->ep
, ~0);
953 ep
->ep
.max_streams
= 16;
954 ep
->last_io
= jiffies
;
955 ep
->gadget
= &dum
->gadget
;
957 INIT_LIST_HEAD(&ep
->queue
);
960 dum
->gadget
.ep0
= &dum
->ep
[0].ep
;
961 list_del_init(&dum
->ep
[0].ep
.ep_list
);
962 INIT_LIST_HEAD(&dum
->fifo_req
.queue
);
964 #ifdef CONFIG_USB_OTG
965 dum
->gadget
.is_otg
= 1;
969 static int dummy_udc_probe(struct platform_device
*pdev
)
974 dum
= *((void **)dev_get_platdata(&pdev
->dev
));
975 dum
->gadget
.name
= gadget_name
;
976 dum
->gadget
.ops
= &dummy_ops
;
977 dum
->gadget
.max_speed
= USB_SPEED_SUPER
;
979 dum
->gadget
.dev
.parent
= &pdev
->dev
;
980 init_dummy_udc_hw(dum
);
982 rc
= usb_add_gadget_udc(&pdev
->dev
, &dum
->gadget
);
986 rc
= device_create_file(&dum
->gadget
.dev
, &dev_attr_function
);
989 platform_set_drvdata(pdev
, dum
);
993 usb_del_gadget_udc(&dum
->gadget
);
998 static int dummy_udc_remove(struct platform_device
*pdev
)
1000 struct dummy
*dum
= platform_get_drvdata(pdev
);
1002 device_remove_file(&dum
->gadget
.dev
, &dev_attr_function
);
1003 usb_del_gadget_udc(&dum
->gadget
);
1007 static void dummy_udc_pm(struct dummy
*dum
, struct dummy_hcd
*dum_hcd
,
1010 spin_lock_irq(&dum
->lock
);
1011 dum
->udc_suspended
= suspend
;
1012 set_link_state(dum_hcd
);
1013 spin_unlock_irq(&dum
->lock
);
1016 static int dummy_udc_suspend(struct platform_device
*pdev
, pm_message_t state
)
1018 struct dummy
*dum
= platform_get_drvdata(pdev
);
1019 struct dummy_hcd
*dum_hcd
= gadget_to_dummy_hcd(&dum
->gadget
);
1021 dev_dbg(&pdev
->dev
, "%s\n", __func__
);
1022 dummy_udc_pm(dum
, dum_hcd
, 1);
1023 usb_hcd_poll_rh_status(dummy_hcd_to_hcd(dum_hcd
));
1027 static int dummy_udc_resume(struct platform_device
*pdev
)
1029 struct dummy
*dum
= platform_get_drvdata(pdev
);
1030 struct dummy_hcd
*dum_hcd
= gadget_to_dummy_hcd(&dum
->gadget
);
1032 dev_dbg(&pdev
->dev
, "%s\n", __func__
);
1033 dummy_udc_pm(dum
, dum_hcd
, 0);
1034 usb_hcd_poll_rh_status(dummy_hcd_to_hcd(dum_hcd
));
1038 static struct platform_driver dummy_udc_driver
= {
1039 .probe
= dummy_udc_probe
,
1040 .remove
= dummy_udc_remove
,
1041 .suspend
= dummy_udc_suspend
,
1042 .resume
= dummy_udc_resume
,
1044 .name
= (char *) gadget_name
,
1045 .owner
= THIS_MODULE
,
1049 /*-------------------------------------------------------------------------*/
1051 static unsigned int dummy_get_ep_idx(const struct usb_endpoint_descriptor
*desc
)
1055 index
= usb_endpoint_num(desc
) << 1;
1056 if (usb_endpoint_dir_in(desc
))
1061 /* MASTER/HOST SIDE DRIVER
1063 * this uses the hcd framework to hook up to host side drivers.
1064 * its root hub will only have one device, otherwise it acts like
1065 * a normal host controller.
1067 * when urbs are queued, they're just stuck on a list that we
1068 * scan in a timer callback. that callback connects writes from
1069 * the host with reads from the device, and so on, based on the
1073 static int dummy_ep_stream_en(struct dummy_hcd
*dum_hcd
, struct urb
*urb
)
1075 const struct usb_endpoint_descriptor
*desc
= &urb
->ep
->desc
;
1078 if (!usb_endpoint_xfer_bulk(desc
))
1081 index
= dummy_get_ep_idx(desc
);
1082 return (1 << index
) & dum_hcd
->stream_en_ep
;
1086 * The max stream number is saved as a nibble so for the 30 possible endpoints
1087 * we only 15 bytes of memory. Therefore we are limited to max 16 streams (0
1088 * means we use only 1 stream). The maximum according to the spec is 16bit so
1089 * if the 16 stream limit is about to go, the array size should be incremented
1090 * to 30 elements of type u16.
1092 static int get_max_streams_for_pipe(struct dummy_hcd
*dum_hcd
,
1097 max_streams
= dum_hcd
->num_stream
[usb_pipeendpoint(pipe
)];
1098 if (usb_pipeout(pipe
))
1106 static void set_max_streams_for_pipe(struct dummy_hcd
*dum_hcd
,
1107 unsigned int pipe
, unsigned int streams
)
1112 max_streams
= dum_hcd
->num_stream
[usb_pipeendpoint(pipe
)];
1113 if (usb_pipeout(pipe
)) {
1117 max_streams
&= 0xf0;
1119 max_streams
|= streams
;
1120 dum_hcd
->num_stream
[usb_pipeendpoint(pipe
)] = max_streams
;
1123 static int dummy_validate_stream(struct dummy_hcd
*dum_hcd
, struct urb
*urb
)
1125 unsigned int max_streams
;
1128 enabled
= dummy_ep_stream_en(dum_hcd
, urb
);
1129 if (!urb
->stream_id
) {
1137 max_streams
= get_max_streams_for_pipe(dum_hcd
,
1138 usb_pipeendpoint(urb
->pipe
));
1139 if (urb
->stream_id
> max_streams
) {
1140 dev_err(dummy_dev(dum_hcd
), "Stream id %d is out of range.\n",
1148 static int dummy_urb_enqueue(
1149 struct usb_hcd
*hcd
,
1153 struct dummy_hcd
*dum_hcd
;
1155 unsigned long flags
;
1158 urbp
= kmalloc(sizeof *urbp
, mem_flags
);
1162 urbp
->miter_started
= 0;
1164 dum_hcd
= hcd_to_dummy_hcd(hcd
);
1165 spin_lock_irqsave(&dum_hcd
->dum
->lock
, flags
);
1167 rc
= dummy_validate_stream(dum_hcd
, urb
);
1173 rc
= usb_hcd_link_urb_to_ep(hcd
, urb
);
1179 if (!dum_hcd
->udev
) {
1180 dum_hcd
->udev
= urb
->dev
;
1181 usb_get_dev(dum_hcd
->udev
);
1182 } else if (unlikely(dum_hcd
->udev
!= urb
->dev
))
1183 dev_err(dummy_dev(dum_hcd
), "usb_device address has changed!\n");
1185 list_add_tail(&urbp
->urbp_list
, &dum_hcd
->urbp_list
);
1187 if (usb_pipetype(urb
->pipe
) == PIPE_CONTROL
)
1188 urb
->error_count
= 1; /* mark as a new urb */
1190 /* kick the scheduler, it'll do the rest */
1191 if (!timer_pending(&dum_hcd
->timer
))
1192 mod_timer(&dum_hcd
->timer
, jiffies
+ 1);
1195 spin_unlock_irqrestore(&dum_hcd
->dum
->lock
, flags
);
1199 static int dummy_urb_dequeue(struct usb_hcd
*hcd
, struct urb
*urb
, int status
)
1201 struct dummy_hcd
*dum_hcd
;
1202 unsigned long flags
;
1205 /* giveback happens automatically in timer callback,
1206 * so make sure the callback happens */
1207 dum_hcd
= hcd_to_dummy_hcd(hcd
);
1208 spin_lock_irqsave(&dum_hcd
->dum
->lock
, flags
);
1210 rc
= usb_hcd_check_unlink_urb(hcd
, urb
, status
);
1211 if (!rc
&& dum_hcd
->rh_state
!= DUMMY_RH_RUNNING
&&
1212 !list_empty(&dum_hcd
->urbp_list
))
1213 mod_timer(&dum_hcd
->timer
, jiffies
);
1215 spin_unlock_irqrestore(&dum_hcd
->dum
->lock
, flags
);
1219 static int dummy_perform_transfer(struct urb
*urb
, struct dummy_request
*req
,
1223 struct urbp
*urbp
= urb
->hcpriv
;
1225 struct sg_mapping_iter
*miter
= &urbp
->miter
;
1230 to_host
= usb_pipein(urb
->pipe
);
1231 rbuf
= req
->req
.buf
+ req
->req
.actual
;
1233 if (!urb
->num_sgs
) {
1234 ubuf
= urb
->transfer_buffer
+ urb
->actual_length
;
1236 memcpy(ubuf
, rbuf
, len
);
1238 memcpy(rbuf
, ubuf
, len
);
1242 if (!urbp
->miter_started
) {
1243 u32 flags
= SG_MITER_ATOMIC
;
1246 flags
|= SG_MITER_TO_SG
;
1248 flags
|= SG_MITER_FROM_SG
;
1250 sg_miter_start(miter
, urb
->sg
, urb
->num_sgs
, flags
);
1251 urbp
->miter_started
= 1;
1253 next_sg
= sg_miter_next(miter
);
1254 if (next_sg
== false) {
1260 this_sg
= min_t(u32
, len
, miter
->length
);
1261 miter
->consumed
= this_sg
;
1265 memcpy(ubuf
, rbuf
, this_sg
);
1267 memcpy(rbuf
, ubuf
, this_sg
);
1272 next_sg
= sg_miter_next(miter
);
1273 if (next_sg
== false) {
1281 sg_miter_stop(miter
);
1285 /* transfer up to a frame's worth; caller must own lock */
1286 static int transfer(struct dummy_hcd
*dum_hcd
, struct urb
*urb
,
1287 struct dummy_ep
*ep
, int limit
, int *status
)
1289 struct dummy
*dum
= dum_hcd
->dum
;
1290 struct dummy_request
*req
;
1293 /* if there's no request queued, the device is NAKing; return */
1294 list_for_each_entry(req
, &ep
->queue
, queue
) {
1295 unsigned host_len
, dev_len
, len
;
1296 int is_short
, to_host
;
1299 if (dummy_ep_stream_en(dum_hcd
, urb
)) {
1300 if ((urb
->stream_id
!= req
->req
.stream_id
))
1304 /* 1..N packets of ep->ep.maxpacket each ... the last one
1305 * may be short (including zero length).
1307 * writer can send a zlp explicitly (length 0) or implicitly
1308 * (length mod maxpacket zero, and 'zero' flag); they always
1311 host_len
= urb
->transfer_buffer_length
- urb
->actual_length
;
1312 dev_len
= req
->req
.length
- req
->req
.actual
;
1313 len
= min(host_len
, dev_len
);
1315 /* FIXME update emulated data toggle too */
1317 to_host
= usb_pipein(urb
->pipe
);
1318 if (unlikely(len
== 0))
1321 /* not enough bandwidth left? */
1322 if (limit
< ep
->ep
.maxpacket
&& limit
< len
)
1324 len
= min_t(unsigned, len
, limit
);
1328 /* use an extra pass for the final short packet */
1329 if (len
> ep
->ep
.maxpacket
) {
1331 len
-= (len
% ep
->ep
.maxpacket
);
1333 is_short
= (len
% ep
->ep
.maxpacket
) != 0;
1335 len
= dummy_perform_transfer(urb
, req
, len
);
1337 ep
->last_io
= jiffies
;
1339 req
->req
.status
= len
;
1342 urb
->actual_length
+= len
;
1343 req
->req
.actual
+= len
;
1347 /* short packets terminate, maybe with overflow/underflow.
1348 * it's only really an error to write too much.
1350 * partially filling a buffer optionally blocks queue advances
1351 * (so completion handlers can clean up the queue) but we don't
1352 * need to emulate such data-in-flight.
1355 if (host_len
== dev_len
) {
1356 req
->req
.status
= 0;
1358 } else if (to_host
) {
1359 req
->req
.status
= 0;
1360 if (dev_len
> host_len
)
1361 *status
= -EOVERFLOW
;
1364 } else if (!to_host
) {
1366 if (host_len
> dev_len
)
1367 req
->req
.status
= -EOVERFLOW
;
1369 req
->req
.status
= 0;
1372 /* many requests terminate without a short packet */
1374 if (req
->req
.length
== req
->req
.actual
1376 req
->req
.status
= 0;
1377 if (urb
->transfer_buffer_length
== urb
->actual_length
1378 && !(urb
->transfer_flags
1383 /* device side completion --> continuable */
1384 if (req
->req
.status
!= -EINPROGRESS
) {
1385 list_del_init(&req
->queue
);
1387 spin_unlock(&dum
->lock
);
1388 req
->req
.complete(&ep
->ep
, &req
->req
);
1389 spin_lock(&dum
->lock
);
1391 /* requests might have been unlinked... */
1395 /* host side completion --> terminate */
1396 if (*status
!= -EINPROGRESS
)
1399 /* rescan to continue with any other queued i/o */
1406 static int periodic_bytes(struct dummy
*dum
, struct dummy_ep
*ep
)
1408 int limit
= ep
->ep
.maxpacket
;
1410 if (dum
->gadget
.speed
== USB_SPEED_HIGH
) {
1413 /* high bandwidth mode */
1414 tmp
= usb_endpoint_maxp(ep
->desc
);
1415 tmp
= (tmp
>> 11) & 0x03;
1416 tmp
*= 8 /* applies to entire frame */;
1417 limit
+= limit
* tmp
;
1419 if (dum
->gadget
.speed
== USB_SPEED_SUPER
) {
1420 switch (usb_endpoint_type(ep
->desc
)) {
1421 case USB_ENDPOINT_XFER_ISOC
:
1422 /* Sec. 4.4.8.2 USB3.0 Spec */
1423 limit
= 3 * 16 * 1024 * 8;
1425 case USB_ENDPOINT_XFER_INT
:
1426 /* Sec. 4.4.7.2 USB3.0 Spec */
1427 limit
= 3 * 1024 * 8;
1429 case USB_ENDPOINT_XFER_BULK
:
1437 #define is_active(dum_hcd) ((dum_hcd->port_status & \
1438 (USB_PORT_STAT_CONNECTION | USB_PORT_STAT_ENABLE | \
1439 USB_PORT_STAT_SUSPEND)) \
1440 == (USB_PORT_STAT_CONNECTION | USB_PORT_STAT_ENABLE))
1442 static struct dummy_ep
*find_endpoint(struct dummy
*dum
, u8 address
)
1446 if (!is_active((dum
->gadget
.speed
== USB_SPEED_SUPER
?
1447 dum
->ss_hcd
: dum
->hs_hcd
)))
1449 if ((address
& ~USB_DIR_IN
) == 0)
1451 for (i
= 1; i
< DUMMY_ENDPOINTS
; i
++) {
1452 struct dummy_ep
*ep
= &dum
->ep
[i
];
1456 if (ep
->desc
->bEndpointAddress
== address
)
1464 #define Dev_Request (USB_TYPE_STANDARD | USB_RECIP_DEVICE)
1465 #define Dev_InRequest (Dev_Request | USB_DIR_IN)
1466 #define Intf_Request (USB_TYPE_STANDARD | USB_RECIP_INTERFACE)
1467 #define Intf_InRequest (Intf_Request | USB_DIR_IN)
1468 #define Ep_Request (USB_TYPE_STANDARD | USB_RECIP_ENDPOINT)
1469 #define Ep_InRequest (Ep_Request | USB_DIR_IN)
1473 * handle_control_request() - handles all control transfers
1474 * @dum: pointer to dummy (the_controller)
1475 * @urb: the urb request to handle
1476 * @setup: pointer to the setup data for a USB device control
1478 * @status: pointer to request handling status
1480 * Return 0 - if the request was handled
1481 * 1 - if the request wasn't handles
1482 * error code on error
1484 static int handle_control_request(struct dummy_hcd
*dum_hcd
, struct urb
*urb
,
1485 struct usb_ctrlrequest
*setup
,
1488 struct dummy_ep
*ep2
;
1489 struct dummy
*dum
= dum_hcd
->dum
;
1494 w_index
= le16_to_cpu(setup
->wIndex
);
1495 w_value
= le16_to_cpu(setup
->wValue
);
1496 switch (setup
->bRequest
) {
1497 case USB_REQ_SET_ADDRESS
:
1498 if (setup
->bRequestType
!= Dev_Request
)
1500 dum
->address
= w_value
;
1502 dev_dbg(udc_dev(dum
), "set_address = %d\n",
1506 case USB_REQ_SET_FEATURE
:
1507 if (setup
->bRequestType
== Dev_Request
) {
1510 case USB_DEVICE_REMOTE_WAKEUP
:
1512 case USB_DEVICE_B_HNP_ENABLE
:
1513 dum
->gadget
.b_hnp_enable
= 1;
1515 case USB_DEVICE_A_HNP_SUPPORT
:
1516 dum
->gadget
.a_hnp_support
= 1;
1518 case USB_DEVICE_A_ALT_HNP_SUPPORT
:
1519 dum
->gadget
.a_alt_hnp_support
= 1;
1521 case USB_DEVICE_U1_ENABLE
:
1522 if (dummy_hcd_to_hcd(dum_hcd
)->speed
==
1524 w_value
= USB_DEV_STAT_U1_ENABLED
;
1526 ret_val
= -EOPNOTSUPP
;
1528 case USB_DEVICE_U2_ENABLE
:
1529 if (dummy_hcd_to_hcd(dum_hcd
)->speed
==
1531 w_value
= USB_DEV_STAT_U2_ENABLED
;
1533 ret_val
= -EOPNOTSUPP
;
1535 case USB_DEVICE_LTM_ENABLE
:
1536 if (dummy_hcd_to_hcd(dum_hcd
)->speed
==
1538 w_value
= USB_DEV_STAT_LTM_ENABLED
;
1540 ret_val
= -EOPNOTSUPP
;
1543 ret_val
= -EOPNOTSUPP
;
1546 dum
->devstatus
|= (1 << w_value
);
1549 } else if (setup
->bRequestType
== Ep_Request
) {
1551 ep2
= find_endpoint(dum
, w_index
);
1552 if (!ep2
|| ep2
->ep
.name
== ep0name
) {
1553 ret_val
= -EOPNOTSUPP
;
1561 case USB_REQ_CLEAR_FEATURE
:
1562 if (setup
->bRequestType
== Dev_Request
) {
1565 case USB_DEVICE_REMOTE_WAKEUP
:
1566 w_value
= USB_DEVICE_REMOTE_WAKEUP
;
1568 case USB_DEVICE_U1_ENABLE
:
1569 if (dummy_hcd_to_hcd(dum_hcd
)->speed
==
1571 w_value
= USB_DEV_STAT_U1_ENABLED
;
1573 ret_val
= -EOPNOTSUPP
;
1575 case USB_DEVICE_U2_ENABLE
:
1576 if (dummy_hcd_to_hcd(dum_hcd
)->speed
==
1578 w_value
= USB_DEV_STAT_U2_ENABLED
;
1580 ret_val
= -EOPNOTSUPP
;
1582 case USB_DEVICE_LTM_ENABLE
:
1583 if (dummy_hcd_to_hcd(dum_hcd
)->speed
==
1585 w_value
= USB_DEV_STAT_LTM_ENABLED
;
1587 ret_val
= -EOPNOTSUPP
;
1590 ret_val
= -EOPNOTSUPP
;
1594 dum
->devstatus
&= ~(1 << w_value
);
1597 } else if (setup
->bRequestType
== Ep_Request
) {
1599 ep2
= find_endpoint(dum
, w_index
);
1601 ret_val
= -EOPNOTSUPP
;
1610 case USB_REQ_GET_STATUS
:
1611 if (setup
->bRequestType
== Dev_InRequest
1612 || setup
->bRequestType
== Intf_InRequest
1613 || setup
->bRequestType
== Ep_InRequest
) {
1616 * device: remote wakeup, selfpowered
1617 * interface: nothing
1620 buf
= (char *)urb
->transfer_buffer
;
1621 if (urb
->transfer_buffer_length
> 0) {
1622 if (setup
->bRequestType
== Ep_InRequest
) {
1623 ep2
= find_endpoint(dum
, w_index
);
1625 ret_val
= -EOPNOTSUPP
;
1628 buf
[0] = ep2
->halted
;
1629 } else if (setup
->bRequestType
==
1631 buf
[0] = (u8
)dum
->devstatus
;
1635 if (urb
->transfer_buffer_length
> 1)
1637 urb
->actual_length
= min_t(u32
, 2,
1638 urb
->transfer_buffer_length
);
1647 /* drive both sides of the transfers; looks like irq handlers to
1648 * both drivers except the callbacks aren't in_irq().
1650 static void dummy_timer(unsigned long _dum_hcd
)
1652 struct dummy_hcd
*dum_hcd
= (struct dummy_hcd
*) _dum_hcd
;
1653 struct dummy
*dum
= dum_hcd
->dum
;
1654 struct urbp
*urbp
, *tmp
;
1655 unsigned long flags
;
1659 /* simplistic model for one frame's bandwidth */
1660 switch (dum
->gadget
.speed
) {
1662 total
= 8/*bytes*/ * 12/*packets*/;
1664 case USB_SPEED_FULL
:
1665 total
= 64/*bytes*/ * 19/*packets*/;
1667 case USB_SPEED_HIGH
:
1668 total
= 512/*bytes*/ * 13/*packets*/ * 8/*uframes*/;
1670 case USB_SPEED_SUPER
:
1671 /* Bus speed is 500000 bytes/ms, so use a little less */
1675 dev_err(dummy_dev(dum_hcd
), "bogus device speed\n");
1679 /* FIXME if HZ != 1000 this will probably misbehave ... */
1681 /* look at each urb queued by the host side driver */
1682 spin_lock_irqsave(&dum
->lock
, flags
);
1684 if (!dum_hcd
->udev
) {
1685 dev_err(dummy_dev(dum_hcd
),
1686 "timer fired with no URBs pending?\n");
1687 spin_unlock_irqrestore(&dum
->lock
, flags
);
1691 for (i
= 0; i
< DUMMY_ENDPOINTS
; i
++) {
1694 dum
->ep
[i
].already_seen
= 0;
1698 list_for_each_entry_safe(urbp
, tmp
, &dum_hcd
->urbp_list
, urbp_list
) {
1700 struct dummy_request
*req
;
1702 struct dummy_ep
*ep
= NULL
;
1704 int status
= -EINPROGRESS
;
1709 else if (dum_hcd
->rh_state
!= DUMMY_RH_RUNNING
)
1711 type
= usb_pipetype(urb
->pipe
);
1713 /* used up this frame's non-periodic bandwidth?
1714 * FIXME there's infinite bandwidth for control and
1715 * periodic transfers ... unrealistic.
1717 if (total
<= 0 && type
== PIPE_BULK
)
1720 /* find the gadget's ep for this request (if configured) */
1721 address
= usb_pipeendpoint (urb
->pipe
);
1722 if (usb_pipein(urb
->pipe
))
1723 address
|= USB_DIR_IN
;
1724 ep
= find_endpoint(dum
, address
);
1726 /* set_configuration() disagreement */
1727 dev_dbg(dummy_dev(dum_hcd
),
1728 "no ep configured for urb %p\n",
1734 if (ep
->already_seen
)
1736 ep
->already_seen
= 1;
1737 if (ep
== &dum
->ep
[0] && urb
->error_count
) {
1738 ep
->setup_stage
= 1; /* a new urb */
1739 urb
->error_count
= 0;
1741 if (ep
->halted
&& !ep
->setup_stage
) {
1742 /* NOTE: must not be iso! */
1743 dev_dbg(dummy_dev(dum_hcd
), "ep %s halted, urb %p\n",
1748 /* FIXME make sure both ends agree on maxpacket */
1750 /* handle control requests */
1751 if (ep
== &dum
->ep
[0] && ep
->setup_stage
) {
1752 struct usb_ctrlrequest setup
;
1755 setup
= *(struct usb_ctrlrequest
*) urb
->setup_packet
;
1756 /* paranoia, in case of stale queued data */
1757 list_for_each_entry(req
, &ep
->queue
, queue
) {
1758 list_del_init(&req
->queue
);
1759 req
->req
.status
= -EOVERFLOW
;
1760 dev_dbg(udc_dev(dum
), "stale req = %p\n",
1763 spin_unlock(&dum
->lock
);
1764 req
->req
.complete(&ep
->ep
, &req
->req
);
1765 spin_lock(&dum
->lock
);
1766 ep
->already_seen
= 0;
1770 /* gadget driver never sees set_address or operations
1771 * on standard feature flags. some hardware doesn't
1774 ep
->last_io
= jiffies
;
1775 ep
->setup_stage
= 0;
1778 value
= handle_control_request(dum_hcd
, urb
, &setup
,
1781 /* gadget driver handles all other requests. block
1782 * until setup() returns; no reentrancy issues etc.
1785 spin_unlock(&dum
->lock
);
1786 value
= dum
->driver
->setup(&dum
->gadget
,
1788 spin_lock(&dum
->lock
);
1791 /* no delays (max 64KB data stage) */
1793 goto treat_control_like_bulk
;
1795 /* error, see below */
1799 if (value
!= -EOPNOTSUPP
)
1800 dev_dbg(udc_dev(dum
),
1804 urb
->actual_length
= 0;
1810 /* non-control requests */
1812 switch (usb_pipetype(urb
->pipe
)) {
1813 case PIPE_ISOCHRONOUS
:
1814 /* FIXME is it urb->interval since the last xfer?
1815 * use urb->iso_frame_desc[i].
1816 * complete whether or not ep has requests queued.
1817 * report random errors, to debug drivers.
1819 limit
= max(limit
, periodic_bytes(dum
, ep
));
1823 case PIPE_INTERRUPT
:
1824 /* FIXME is it urb->interval since the last xfer?
1825 * this almost certainly polls too fast.
1827 limit
= max(limit
, periodic_bytes(dum
, ep
));
1831 treat_control_like_bulk
:
1832 ep
->last_io
= jiffies
;
1833 total
= transfer(dum_hcd
, urb
, ep
, limit
, &status
);
1837 /* incomplete transfer? */
1838 if (status
== -EINPROGRESS
)
1842 list_del(&urbp
->urbp_list
);
1845 ep
->already_seen
= ep
->setup_stage
= 0;
1847 usb_hcd_unlink_urb_from_ep(dummy_hcd_to_hcd(dum_hcd
), urb
);
1848 spin_unlock(&dum
->lock
);
1849 usb_hcd_giveback_urb(dummy_hcd_to_hcd(dum_hcd
), urb
, status
);
1850 spin_lock(&dum
->lock
);
1855 if (list_empty(&dum_hcd
->urbp_list
)) {
1856 usb_put_dev(dum_hcd
->udev
);
1857 dum_hcd
->udev
= NULL
;
1858 } else if (dum_hcd
->rh_state
== DUMMY_RH_RUNNING
) {
1859 /* want a 1 msec delay here */
1860 mod_timer(&dum_hcd
->timer
, jiffies
+ msecs_to_jiffies(1));
1863 spin_unlock_irqrestore(&dum
->lock
, flags
);
1866 /*-------------------------------------------------------------------------*/
1868 #define PORT_C_MASK \
1869 ((USB_PORT_STAT_C_CONNECTION \
1870 | USB_PORT_STAT_C_ENABLE \
1871 | USB_PORT_STAT_C_SUSPEND \
1872 | USB_PORT_STAT_C_OVERCURRENT \
1873 | USB_PORT_STAT_C_RESET) << 16)
1875 static int dummy_hub_status(struct usb_hcd
*hcd
, char *buf
)
1877 struct dummy_hcd
*dum_hcd
;
1878 unsigned long flags
;
1881 dum_hcd
= hcd_to_dummy_hcd(hcd
);
1883 spin_lock_irqsave(&dum_hcd
->dum
->lock
, flags
);
1884 if (!HCD_HW_ACCESSIBLE(hcd
))
1887 if (dum_hcd
->resuming
&& time_after_eq(jiffies
, dum_hcd
->re_timeout
)) {
1888 dum_hcd
->port_status
|= (USB_PORT_STAT_C_SUSPEND
<< 16);
1889 dum_hcd
->port_status
&= ~USB_PORT_STAT_SUSPEND
;
1890 set_link_state(dum_hcd
);
1893 if ((dum_hcd
->port_status
& PORT_C_MASK
) != 0) {
1895 dev_dbg(dummy_dev(dum_hcd
), "port status 0x%08x has changes\n",
1896 dum_hcd
->port_status
);
1898 if (dum_hcd
->rh_state
== DUMMY_RH_SUSPENDED
)
1899 usb_hcd_resume_root_hub(hcd
);
1902 spin_unlock_irqrestore(&dum_hcd
->dum
->lock
, flags
);
1906 /* usb 3.0 root hub device descriptor */
1908 struct usb_bos_descriptor bos
;
1909 struct usb_ss_cap_descriptor ss_cap
;
1910 } __packed usb3_bos_desc
= {
1913 .bLength
= USB_DT_BOS_SIZE
,
1914 .bDescriptorType
= USB_DT_BOS
,
1915 .wTotalLength
= cpu_to_le16(sizeof(usb3_bos_desc
)),
1916 .bNumDeviceCaps
= 1,
1919 .bLength
= USB_DT_USB_SS_CAP_SIZE
,
1920 .bDescriptorType
= USB_DT_DEVICE_CAPABILITY
,
1921 .bDevCapabilityType
= USB_SS_CAP_TYPE
,
1922 .wSpeedSupported
= cpu_to_le16(USB_5GBPS_OPERATION
),
1923 .bFunctionalitySupport
= ilog2(USB_5GBPS_OPERATION
),
1928 ss_hub_descriptor(struct usb_hub_descriptor
*desc
)
1930 memset(desc
, 0, sizeof *desc
);
1931 desc
->bDescriptorType
= 0x2a;
1932 desc
->bDescLength
= 12;
1933 desc
->wHubCharacteristics
= cpu_to_le16(0x0001);
1934 desc
->bNbrPorts
= 1;
1935 desc
->u
.ss
.bHubHdrDecLat
= 0x04; /* Worst case: 0.4 micro sec*/
1936 desc
->u
.ss
.DeviceRemovable
= 0xffff;
1939 static inline void hub_descriptor(struct usb_hub_descriptor
*desc
)
1941 memset(desc
, 0, sizeof *desc
);
1942 desc
->bDescriptorType
= 0x29;
1943 desc
->bDescLength
= 9;
1944 desc
->wHubCharacteristics
= cpu_to_le16(0x0001);
1945 desc
->bNbrPorts
= 1;
1946 desc
->u
.hs
.DeviceRemovable
[0] = 0xff;
1947 desc
->u
.hs
.DeviceRemovable
[1] = 0xff;
1950 static int dummy_hub_control(
1951 struct usb_hcd
*hcd
,
1958 struct dummy_hcd
*dum_hcd
;
1960 unsigned long flags
;
1962 if (!HCD_HW_ACCESSIBLE(hcd
))
1965 dum_hcd
= hcd_to_dummy_hcd(hcd
);
1967 spin_lock_irqsave(&dum_hcd
->dum
->lock
, flags
);
1969 case ClearHubFeature
:
1971 case ClearPortFeature
:
1973 case USB_PORT_FEAT_SUSPEND
:
1974 if (hcd
->speed
== HCD_USB3
) {
1975 dev_dbg(dummy_dev(dum_hcd
),
1976 "USB_PORT_FEAT_SUSPEND req not "
1977 "supported for USB 3.0 roothub\n");
1980 if (dum_hcd
->port_status
& USB_PORT_STAT_SUSPEND
) {
1981 /* 20msec resume signaling */
1982 dum_hcd
->resuming
= 1;
1983 dum_hcd
->re_timeout
= jiffies
+
1984 msecs_to_jiffies(20);
1987 case USB_PORT_FEAT_POWER
:
1988 if (hcd
->speed
== HCD_USB3
) {
1989 if (dum_hcd
->port_status
& USB_PORT_STAT_POWER
)
1990 dev_dbg(dummy_dev(dum_hcd
),
1993 if (dum_hcd
->port_status
&
1994 USB_SS_PORT_STAT_POWER
)
1995 dev_dbg(dummy_dev(dum_hcd
),
1999 dum_hcd
->port_status
&= ~(1 << wValue
);
2000 set_link_state(dum_hcd
);
2003 case GetHubDescriptor
:
2004 if (hcd
->speed
== HCD_USB3
&&
2005 (wLength
< USB_DT_SS_HUB_SIZE
||
2006 wValue
!= (USB_DT_SS_HUB
<< 8))) {
2007 dev_dbg(dummy_dev(dum_hcd
),
2008 "Wrong hub descriptor type for "
2009 "USB 3.0 roothub.\n");
2012 if (hcd
->speed
== HCD_USB3
)
2013 ss_hub_descriptor((struct usb_hub_descriptor
*) buf
);
2015 hub_descriptor((struct usb_hub_descriptor
*) buf
);
2018 case DeviceRequest
| USB_REQ_GET_DESCRIPTOR
:
2019 if (hcd
->speed
!= HCD_USB3
)
2022 if ((wValue
>> 8) != USB_DT_BOS
)
2025 memcpy(buf
, &usb3_bos_desc
, sizeof(usb3_bos_desc
));
2026 retval
= sizeof(usb3_bos_desc
);
2030 *(__le32
*) buf
= cpu_to_le32(0);
2036 /* whoever resets or resumes must GetPortStatus to
2039 if (dum_hcd
->resuming
&&
2040 time_after_eq(jiffies
, dum_hcd
->re_timeout
)) {
2041 dum_hcd
->port_status
|= (USB_PORT_STAT_C_SUSPEND
<< 16);
2042 dum_hcd
->port_status
&= ~USB_PORT_STAT_SUSPEND
;
2044 if ((dum_hcd
->port_status
& USB_PORT_STAT_RESET
) != 0 &&
2045 time_after_eq(jiffies
, dum_hcd
->re_timeout
)) {
2046 dum_hcd
->port_status
|= (USB_PORT_STAT_C_RESET
<< 16);
2047 dum_hcd
->port_status
&= ~USB_PORT_STAT_RESET
;
2048 if (dum_hcd
->dum
->pullup
) {
2049 dum_hcd
->port_status
|= USB_PORT_STAT_ENABLE
;
2051 if (hcd
->speed
< HCD_USB3
) {
2052 switch (dum_hcd
->dum
->gadget
.speed
) {
2053 case USB_SPEED_HIGH
:
2054 dum_hcd
->port_status
|=
2055 USB_PORT_STAT_HIGH_SPEED
;
2058 dum_hcd
->dum
->gadget
.ep0
->
2060 dum_hcd
->port_status
|=
2061 USB_PORT_STAT_LOW_SPEED
;
2064 dum_hcd
->dum
->gadget
.speed
=
2071 set_link_state(dum_hcd
);
2072 ((__le16
*) buf
)[0] = cpu_to_le16(dum_hcd
->port_status
);
2073 ((__le16
*) buf
)[1] = cpu_to_le16(dum_hcd
->port_status
>> 16);
2078 case SetPortFeature
:
2080 case USB_PORT_FEAT_LINK_STATE
:
2081 if (hcd
->speed
!= HCD_USB3
) {
2082 dev_dbg(dummy_dev(dum_hcd
),
2083 "USB_PORT_FEAT_LINK_STATE req not "
2084 "supported for USB 2.0 roothub\n");
2088 * Since this is dummy we don't have an actual link so
2089 * there is nothing to do for the SET_LINK_STATE cmd
2092 case USB_PORT_FEAT_U1_TIMEOUT
:
2093 case USB_PORT_FEAT_U2_TIMEOUT
:
2094 /* TODO: add suspend/resume support! */
2095 if (hcd
->speed
!= HCD_USB3
) {
2096 dev_dbg(dummy_dev(dum_hcd
),
2097 "USB_PORT_FEAT_U1/2_TIMEOUT req not "
2098 "supported for USB 2.0 roothub\n");
2102 case USB_PORT_FEAT_SUSPEND
:
2103 /* Applicable only for USB2.0 hub */
2104 if (hcd
->speed
== HCD_USB3
) {
2105 dev_dbg(dummy_dev(dum_hcd
),
2106 "USB_PORT_FEAT_SUSPEND req not "
2107 "supported for USB 3.0 roothub\n");
2110 if (dum_hcd
->active
) {
2111 dum_hcd
->port_status
|= USB_PORT_STAT_SUSPEND
;
2113 /* HNP would happen here; for now we
2114 * assume b_bus_req is always true.
2116 set_link_state(dum_hcd
);
2117 if (((1 << USB_DEVICE_B_HNP_ENABLE
)
2118 & dum_hcd
->dum
->devstatus
) != 0)
2119 dev_dbg(dummy_dev(dum_hcd
),
2123 case USB_PORT_FEAT_POWER
:
2124 if (hcd
->speed
== HCD_USB3
)
2125 dum_hcd
->port_status
|= USB_SS_PORT_STAT_POWER
;
2127 dum_hcd
->port_status
|= USB_PORT_STAT_POWER
;
2128 set_link_state(dum_hcd
);
2130 case USB_PORT_FEAT_BH_PORT_RESET
:
2131 /* Applicable only for USB3.0 hub */
2132 if (hcd
->speed
!= HCD_USB3
) {
2133 dev_dbg(dummy_dev(dum_hcd
),
2134 "USB_PORT_FEAT_BH_PORT_RESET req not "
2135 "supported for USB 2.0 roothub\n");
2139 case USB_PORT_FEAT_RESET
:
2140 /* if it's already enabled, disable */
2141 if (hcd
->speed
== HCD_USB3
) {
2142 dum_hcd
->port_status
= 0;
2143 dum_hcd
->port_status
=
2144 (USB_SS_PORT_STAT_POWER
|
2145 USB_PORT_STAT_CONNECTION
|
2146 USB_PORT_STAT_RESET
);
2148 dum_hcd
->port_status
&= ~(USB_PORT_STAT_ENABLE
2149 | USB_PORT_STAT_LOW_SPEED
2150 | USB_PORT_STAT_HIGH_SPEED
);
2152 * We want to reset device status. All but the
2153 * Self powered feature
2155 dum_hcd
->dum
->devstatus
&=
2156 (1 << USB_DEVICE_SELF_POWERED
);
2158 * FIXME USB3.0: what is the correct reset signaling
2159 * interval? Is it still 50msec as for HS?
2161 dum_hcd
->re_timeout
= jiffies
+ msecs_to_jiffies(50);
2164 if (hcd
->speed
== HCD_USB3
) {
2165 if ((dum_hcd
->port_status
&
2166 USB_SS_PORT_STAT_POWER
) != 0) {
2167 dum_hcd
->port_status
|= (1 << wValue
);
2168 set_link_state(dum_hcd
);
2171 if ((dum_hcd
->port_status
&
2172 USB_PORT_STAT_POWER
) != 0) {
2173 dum_hcd
->port_status
|= (1 << wValue
);
2174 set_link_state(dum_hcd
);
2178 case GetPortErrorCount
:
2179 if (hcd
->speed
!= HCD_USB3
) {
2180 dev_dbg(dummy_dev(dum_hcd
),
2181 "GetPortErrorCount req not "
2182 "supported for USB 2.0 roothub\n");
2185 /* We'll always return 0 since this is a dummy hub */
2186 *(__le32
*) buf
= cpu_to_le32(0);
2189 if (hcd
->speed
!= HCD_USB3
) {
2190 dev_dbg(dummy_dev(dum_hcd
),
2191 "SetHubDepth req not supported for "
2192 "USB 2.0 roothub\n");
2197 dev_dbg(dummy_dev(dum_hcd
),
2198 "hub control req%04x v%04x i%04x l%d\n",
2199 typeReq
, wValue
, wIndex
, wLength
);
2201 /* "protocol stall" on error */
2204 spin_unlock_irqrestore(&dum_hcd
->dum
->lock
, flags
);
2206 if ((dum_hcd
->port_status
& PORT_C_MASK
) != 0)
2207 usb_hcd_poll_rh_status(hcd
);
2211 static int dummy_bus_suspend(struct usb_hcd
*hcd
)
2213 struct dummy_hcd
*dum_hcd
= hcd_to_dummy_hcd(hcd
);
2215 dev_dbg(&hcd
->self
.root_hub
->dev
, "%s\n", __func__
);
2217 spin_lock_irq(&dum_hcd
->dum
->lock
);
2218 dum_hcd
->rh_state
= DUMMY_RH_SUSPENDED
;
2219 set_link_state(dum_hcd
);
2220 hcd
->state
= HC_STATE_SUSPENDED
;
2221 spin_unlock_irq(&dum_hcd
->dum
->lock
);
2225 static int dummy_bus_resume(struct usb_hcd
*hcd
)
2227 struct dummy_hcd
*dum_hcd
= hcd_to_dummy_hcd(hcd
);
2230 dev_dbg(&hcd
->self
.root_hub
->dev
, "%s\n", __func__
);
2232 spin_lock_irq(&dum_hcd
->dum
->lock
);
2233 if (!HCD_HW_ACCESSIBLE(hcd
)) {
2236 dum_hcd
->rh_state
= DUMMY_RH_RUNNING
;
2237 set_link_state(dum_hcd
);
2238 if (!list_empty(&dum_hcd
->urbp_list
))
2239 mod_timer(&dum_hcd
->timer
, jiffies
);
2240 hcd
->state
= HC_STATE_RUNNING
;
2242 spin_unlock_irq(&dum_hcd
->dum
->lock
);
2246 /*-------------------------------------------------------------------------*/
2248 static inline ssize_t
show_urb(char *buf
, size_t size
, struct urb
*urb
)
2250 int ep
= usb_pipeendpoint(urb
->pipe
);
2252 return snprintf(buf
, size
,
2253 "urb/%p %s ep%d%s%s len %d/%d\n",
2256 switch (urb
->dev
->speed
) {
2260 case USB_SPEED_FULL
:
2263 case USB_SPEED_HIGH
:
2266 case USB_SPEED_SUPER
:
2273 ep
, ep
? (usb_pipein(urb
->pipe
) ? "in" : "out") : "",
2275 switch (usb_pipetype(urb
->pipe
)) { \
2276 case PIPE_CONTROL
: \
2282 case PIPE_INTERRUPT
: \
2289 urb
->actual_length
, urb
->transfer_buffer_length
);
2292 static ssize_t
urbs_show(struct device
*dev
, struct device_attribute
*attr
,
2295 struct usb_hcd
*hcd
= dev_get_drvdata(dev
);
2296 struct dummy_hcd
*dum_hcd
= hcd_to_dummy_hcd(hcd
);
2299 unsigned long flags
;
2301 spin_lock_irqsave(&dum_hcd
->dum
->lock
, flags
);
2302 list_for_each_entry(urbp
, &dum_hcd
->urbp_list
, urbp_list
) {
2305 temp
= show_urb(buf
, PAGE_SIZE
- size
, urbp
->urb
);
2309 spin_unlock_irqrestore(&dum_hcd
->dum
->lock
, flags
);
2313 static DEVICE_ATTR_RO(urbs
);
2315 static int dummy_start_ss(struct dummy_hcd
*dum_hcd
)
2317 init_timer(&dum_hcd
->timer
);
2318 dum_hcd
->timer
.function
= dummy_timer
;
2319 dum_hcd
->timer
.data
= (unsigned long)dum_hcd
;
2320 dum_hcd
->rh_state
= DUMMY_RH_RUNNING
;
2321 dum_hcd
->stream_en_ep
= 0;
2322 INIT_LIST_HEAD(&dum_hcd
->urbp_list
);
2323 dummy_hcd_to_hcd(dum_hcd
)->power_budget
= POWER_BUDGET
;
2324 dummy_hcd_to_hcd(dum_hcd
)->state
= HC_STATE_RUNNING
;
2325 dummy_hcd_to_hcd(dum_hcd
)->uses_new_polling
= 1;
2326 #ifdef CONFIG_USB_OTG
2327 dummy_hcd_to_hcd(dum_hcd
)->self
.otg_port
= 1;
2331 /* FIXME 'urbs' should be a per-device thing, maybe in usbcore */
2332 return device_create_file(dummy_dev(dum_hcd
), &dev_attr_urbs
);
2335 static int dummy_start(struct usb_hcd
*hcd
)
2337 struct dummy_hcd
*dum_hcd
= hcd_to_dummy_hcd(hcd
);
2340 * MASTER side init ... we emulate a root hub that'll only ever
2341 * talk to one device (the slave side). Also appears in sysfs,
2342 * just like more familiar pci-based HCDs.
2344 if (!usb_hcd_is_primary_hcd(hcd
))
2345 return dummy_start_ss(dum_hcd
);
2347 spin_lock_init(&dum_hcd
->dum
->lock
);
2348 init_timer(&dum_hcd
->timer
);
2349 dum_hcd
->timer
.function
= dummy_timer
;
2350 dum_hcd
->timer
.data
= (unsigned long)dum_hcd
;
2351 dum_hcd
->rh_state
= DUMMY_RH_RUNNING
;
2353 INIT_LIST_HEAD(&dum_hcd
->urbp_list
);
2355 hcd
->power_budget
= POWER_BUDGET
;
2356 hcd
->state
= HC_STATE_RUNNING
;
2357 hcd
->uses_new_polling
= 1;
2359 #ifdef CONFIG_USB_OTG
2360 hcd
->self
.otg_port
= 1;
2363 /* FIXME 'urbs' should be a per-device thing, maybe in usbcore */
2364 return device_create_file(dummy_dev(dum_hcd
), &dev_attr_urbs
);
2367 static void dummy_stop(struct usb_hcd
*hcd
)
2371 dum
= hcd_to_dummy_hcd(hcd
)->dum
;
2372 device_remove_file(dummy_dev(hcd_to_dummy_hcd(hcd
)), &dev_attr_urbs
);
2373 usb_gadget_unregister_driver(dum
->driver
);
2374 dev_info(dummy_dev(hcd_to_dummy_hcd(hcd
)), "stopped\n");
2377 /*-------------------------------------------------------------------------*/
2379 static int dummy_h_get_frame(struct usb_hcd
*hcd
)
2381 return dummy_g_get_frame(NULL
);
2384 static int dummy_setup(struct usb_hcd
*hcd
)
2388 dum
= *((void **)dev_get_platdata(hcd
->self
.controller
));
2389 hcd
->self
.sg_tablesize
= ~0;
2390 if (usb_hcd_is_primary_hcd(hcd
)) {
2391 dum
->hs_hcd
= hcd_to_dummy_hcd(hcd
);
2392 dum
->hs_hcd
->dum
= dum
;
2394 * Mark the first roothub as being USB 2.0.
2395 * The USB 3.0 roothub will be registered later by
2398 hcd
->speed
= HCD_USB2
;
2399 hcd
->self
.root_hub
->speed
= USB_SPEED_HIGH
;
2401 dum
->ss_hcd
= hcd_to_dummy_hcd(hcd
);
2402 dum
->ss_hcd
->dum
= dum
;
2403 hcd
->speed
= HCD_USB3
;
2404 hcd
->self
.root_hub
->speed
= USB_SPEED_SUPER
;
2409 /* Change a group of bulk endpoints to support multiple stream IDs */
2410 static int dummy_alloc_streams(struct usb_hcd
*hcd
, struct usb_device
*udev
,
2411 struct usb_host_endpoint
**eps
, unsigned int num_eps
,
2412 unsigned int num_streams
, gfp_t mem_flags
)
2414 struct dummy_hcd
*dum_hcd
= hcd_to_dummy_hcd(hcd
);
2415 unsigned long flags
;
2417 int ret_streams
= num_streams
;
2424 spin_lock_irqsave(&dum_hcd
->dum
->lock
, flags
);
2425 for (i
= 0; i
< num_eps
; i
++) {
2426 index
= dummy_get_ep_idx(&eps
[i
]->desc
);
2427 if ((1 << index
) & dum_hcd
->stream_en_ep
) {
2428 ret_streams
= -EINVAL
;
2431 max_stream
= usb_ss_max_streams(&eps
[i
]->ss_ep_comp
);
2433 ret_streams
= -EINVAL
;
2436 if (max_stream
< ret_streams
) {
2437 dev_dbg(dummy_dev(dum_hcd
), "Ep 0x%x only supports %u "
2439 eps
[i
]->desc
.bEndpointAddress
,
2441 ret_streams
= max_stream
;
2445 for (i
= 0; i
< num_eps
; i
++) {
2446 index
= dummy_get_ep_idx(&eps
[i
]->desc
);
2447 dum_hcd
->stream_en_ep
|= 1 << index
;
2448 set_max_streams_for_pipe(dum_hcd
,
2449 usb_endpoint_num(&eps
[i
]->desc
), ret_streams
);
2452 spin_unlock_irqrestore(&dum_hcd
->dum
->lock
, flags
);
2456 /* Reverts a group of bulk endpoints back to not using stream IDs. */
2457 static int dummy_free_streams(struct usb_hcd
*hcd
, struct usb_device
*udev
,
2458 struct usb_host_endpoint
**eps
, unsigned int num_eps
,
2461 struct dummy_hcd
*dum_hcd
= hcd_to_dummy_hcd(hcd
);
2462 unsigned long flags
;
2467 spin_lock_irqsave(&dum_hcd
->dum
->lock
, flags
);
2468 for (i
= 0; i
< num_eps
; i
++) {
2469 index
= dummy_get_ep_idx(&eps
[i
]->desc
);
2470 if (!((1 << index
) & dum_hcd
->stream_en_ep
)) {
2476 for (i
= 0; i
< num_eps
; i
++) {
2477 index
= dummy_get_ep_idx(&eps
[i
]->desc
);
2478 dum_hcd
->stream_en_ep
&= ~(1 << index
);
2479 set_max_streams_for_pipe(dum_hcd
,
2480 usb_endpoint_num(&eps
[i
]->desc
), 0);
2484 spin_unlock_irqrestore(&dum_hcd
->dum
->lock
, flags
);
2488 static struct hc_driver dummy_hcd
= {
2489 .description
= (char *) driver_name
,
2490 .product_desc
= "Dummy host controller",
2491 .hcd_priv_size
= sizeof(struct dummy_hcd
),
2493 .flags
= HCD_USB3
| HCD_SHARED
,
2495 .reset
= dummy_setup
,
2496 .start
= dummy_start
,
2499 .urb_enqueue
= dummy_urb_enqueue
,
2500 .urb_dequeue
= dummy_urb_dequeue
,
2502 .get_frame_number
= dummy_h_get_frame
,
2504 .hub_status_data
= dummy_hub_status
,
2505 .hub_control
= dummy_hub_control
,
2506 .bus_suspend
= dummy_bus_suspend
,
2507 .bus_resume
= dummy_bus_resume
,
2509 .alloc_streams
= dummy_alloc_streams
,
2510 .free_streams
= dummy_free_streams
,
2513 static int dummy_hcd_probe(struct platform_device
*pdev
)
2516 struct usb_hcd
*hs_hcd
;
2517 struct usb_hcd
*ss_hcd
;
2520 dev_info(&pdev
->dev
, "%s, driver " DRIVER_VERSION
"\n", driver_desc
);
2521 dum
= *((void **)dev_get_platdata(&pdev
->dev
));
2523 if (!mod_data
.is_super_speed
)
2524 dummy_hcd
.flags
= HCD_USB2
;
2525 hs_hcd
= usb_create_hcd(&dummy_hcd
, &pdev
->dev
, dev_name(&pdev
->dev
));
2530 retval
= usb_add_hcd(hs_hcd
, 0, 0);
2534 if (mod_data
.is_super_speed
) {
2535 ss_hcd
= usb_create_shared_hcd(&dummy_hcd
, &pdev
->dev
,
2536 dev_name(&pdev
->dev
), hs_hcd
);
2539 goto dealloc_usb2_hcd
;
2542 retval
= usb_add_hcd(ss_hcd
, 0, 0);
2549 usb_put_hcd(ss_hcd
);
2551 usb_remove_hcd(hs_hcd
);
2553 usb_put_hcd(hs_hcd
);
2554 dum
->hs_hcd
= dum
->ss_hcd
= NULL
;
2558 static int dummy_hcd_remove(struct platform_device
*pdev
)
2562 dum
= hcd_to_dummy_hcd(platform_get_drvdata(pdev
))->dum
;
2565 usb_remove_hcd(dummy_hcd_to_hcd(dum
->ss_hcd
));
2566 usb_put_hcd(dummy_hcd_to_hcd(dum
->ss_hcd
));
2569 usb_remove_hcd(dummy_hcd_to_hcd(dum
->hs_hcd
));
2570 usb_put_hcd(dummy_hcd_to_hcd(dum
->hs_hcd
));
2578 static int dummy_hcd_suspend(struct platform_device
*pdev
, pm_message_t state
)
2580 struct usb_hcd
*hcd
;
2581 struct dummy_hcd
*dum_hcd
;
2584 dev_dbg(&pdev
->dev
, "%s\n", __func__
);
2586 hcd
= platform_get_drvdata(pdev
);
2587 dum_hcd
= hcd_to_dummy_hcd(hcd
);
2588 if (dum_hcd
->rh_state
== DUMMY_RH_RUNNING
) {
2589 dev_warn(&pdev
->dev
, "Root hub isn't suspended!\n");
2592 clear_bit(HCD_FLAG_HW_ACCESSIBLE
, &hcd
->flags
);
2596 static int dummy_hcd_resume(struct platform_device
*pdev
)
2598 struct usb_hcd
*hcd
;
2600 dev_dbg(&pdev
->dev
, "%s\n", __func__
);
2602 hcd
= platform_get_drvdata(pdev
);
2603 set_bit(HCD_FLAG_HW_ACCESSIBLE
, &hcd
->flags
);
2604 usb_hcd_poll_rh_status(hcd
);
2608 static struct platform_driver dummy_hcd_driver
= {
2609 .probe
= dummy_hcd_probe
,
2610 .remove
= dummy_hcd_remove
,
2611 .suspend
= dummy_hcd_suspend
,
2612 .resume
= dummy_hcd_resume
,
2614 .name
= (char *) driver_name
,
2615 .owner
= THIS_MODULE
,
2619 /*-------------------------------------------------------------------------*/
2620 #define MAX_NUM_UDC 2
2621 static struct platform_device
*the_udc_pdev
[MAX_NUM_UDC
];
2622 static struct platform_device
*the_hcd_pdev
[MAX_NUM_UDC
];
2624 static int __init
init(void)
2626 int retval
= -ENOMEM
;
2628 struct dummy
*dum
[MAX_NUM_UDC
];
2633 if (!mod_data
.is_high_speed
&& mod_data
.is_super_speed
)
2636 if (mod_data
.num
< 1 || mod_data
.num
> MAX_NUM_UDC
) {
2637 pr_err("Number of emulated UDC must be in range of 1…%d\n",
2642 for (i
= 0; i
< mod_data
.num
; i
++) {
2643 the_hcd_pdev
[i
] = platform_device_alloc(driver_name
, i
);
2644 if (!the_hcd_pdev
[i
]) {
2647 platform_device_put(the_hcd_pdev
[i
--]);
2651 for (i
= 0; i
< mod_data
.num
; i
++) {
2652 the_udc_pdev
[i
] = platform_device_alloc(gadget_name
, i
);
2653 if (!the_udc_pdev
[i
]) {
2656 platform_device_put(the_udc_pdev
[i
--]);
2660 for (i
= 0; i
< mod_data
.num
; i
++) {
2661 dum
[i
] = kzalloc(sizeof(struct dummy
), GFP_KERNEL
);
2666 retval
= platform_device_add_data(the_hcd_pdev
[i
], &dum
[i
],
2670 retval
= platform_device_add_data(the_udc_pdev
[i
], &dum
[i
],
2676 retval
= platform_driver_register(&dummy_hcd_driver
);
2679 retval
= platform_driver_register(&dummy_udc_driver
);
2681 goto err_register_udc_driver
;
2683 for (i
= 0; i
< mod_data
.num
; i
++) {
2684 retval
= platform_device_add(the_hcd_pdev
[i
]);
2688 platform_device_del(the_hcd_pdev
[i
--]);
2692 for (i
= 0; i
< mod_data
.num
; i
++) {
2693 if (!dum
[i
]->hs_hcd
||
2694 (!dum
[i
]->ss_hcd
&& mod_data
.is_super_speed
)) {
2696 * The hcd was added successfully but its probe
2697 * function failed for some reason.
2704 for (i
= 0; i
< mod_data
.num
; i
++) {
2705 retval
= platform_device_add(the_udc_pdev
[i
]);
2709 platform_device_del(the_udc_pdev
[i
]);
2714 for (i
= 0; i
< mod_data
.num
; i
++) {
2715 if (!platform_get_drvdata(the_udc_pdev
[i
])) {
2717 * The udc was added successfully but its probe
2718 * function failed for some reason.
2727 for (i
= 0; i
< mod_data
.num
; i
++)
2728 platform_device_del(the_udc_pdev
[i
]);
2730 for (i
= 0; i
< mod_data
.num
; i
++)
2731 platform_device_del(the_hcd_pdev
[i
]);
2733 platform_driver_unregister(&dummy_udc_driver
);
2734 err_register_udc_driver
:
2735 platform_driver_unregister(&dummy_hcd_driver
);
2737 for (i
= 0; i
< mod_data
.num
; i
++)
2739 for (i
= 0; i
< mod_data
.num
; i
++)
2740 platform_device_put(the_udc_pdev
[i
]);
2742 for (i
= 0; i
< mod_data
.num
; i
++)
2743 platform_device_put(the_hcd_pdev
[i
]);
2748 static void __exit
cleanup(void)
2752 for (i
= 0; i
< mod_data
.num
; i
++) {
2755 dum
= *((void **)dev_get_platdata(&the_udc_pdev
[i
]->dev
));
2757 platform_device_unregister(the_udc_pdev
[i
]);
2758 platform_device_unregister(the_hcd_pdev
[i
]);
2761 platform_driver_unregister(&dummy_udc_driver
);
2762 platform_driver_unregister(&dummy_hcd_driver
);
2764 module_exit(cleanup
);