drivers/usb/gadget/legacy/ether.c

   1 /*
   2  * ether.c -- Ethernet gadget driver, with CDC and non-CDC options
   3  *
   4  * Copyright (C) 2003-2005,2008 David Brownell
   5  * Copyright (C) 2003-2004 Robert Schwebel, Benedikt Spranger
   6  * Copyright (C) 2008 Nokia Corporation
   7  *
   8  * This program is free software; you can redistribute it and/or modify
   9  * it under the terms of the GNU General Public License as published by
  10  * the Free Software Foundation; either version 2 of the License, or
  11  * (at your option) any later version.
  12  */
  13
  14 /* #define VERBOSE_DEBUG */
  15
  16 #include <linux/kernel.h>
  17 #include <linux/netdevice.h>
  18
  19 #if defined USB_ETH_RNDIS
  20 #  undef USB_ETH_RNDIS
  21 #endif
  22 #ifdef CONFIG_USB_ETH_RNDIS
  23 #  define USB_ETH_RNDIS y
  24 #endif
  25
  26 #include "u_ether.h"
  27
  28
  29 /*
  30  * Ethernet gadget driver -- with CDC and non-CDC options
  31  * Builds on hardware support for a full duplex link.
  32  *
  33  * CDC Ethernet is the standard USB solution for sending Ethernet frames
  34  * using USB.  Real hardware tends to use the same framing protocol but look
  35  * different for control features.  This driver strongly prefers to use
  36  * this USB-IF standard as its open-systems interoperability solution;
  37  * most host side USB stacks (except from Microsoft) support it.
  38  *
  39  * This is sometimes called "CDC ECM" (Ethernet Control Model) to support
  40  * TLA-soup.  "CDC ACM" (Abstract Control Model) is for modems, and a new
  41  * "CDC EEM" (Ethernet Emulation Model) is starting to spread.
  42  *
  43  * There's some hardware that can't talk CDC ECM.  We make that hardware
  44  * implement a "minimalist" vendor-agnostic CDC core:  same framing, but
  45  * link-level setup only requires activating the configuration.  Only the
  46  * endpoint descriptors, and product/vendor IDs, are relevant; no control
  47  * operations are available.  Linux supports it, but other host operating
  48  * systems may not.  (This is a subset of CDC Ethernet.)
  49  *
  50  * It turns out that if you add a few descriptors to that "CDC Subset",
  51  * (Windows) host side drivers from MCCI can treat it as one submode of
  52  * a proprietary scheme called "SAFE" ... without needing to know about
  53  * specific product/vendor IDs.  So we do that, making it easier to use
  54  * those MS-Windows drivers.  Those added descriptors make it resemble a
  55  * CDC MDLM device, but they don't change device behavior at all.  (See
  56  * MCCI Engineering report 950198 "SAFE Networking Functions".)
  57  *
  58  * A third option is also in use.  Rather than CDC Ethernet, or something
  59  * simpler, Microsoft pushes their own approach: RNDIS.  The published
  60  * RNDIS specs are ambiguous and appear to be incomplete, and are also
  61  * needlessly complex.  They borrow more from CDC ACM than CDC ECM.
  62  */
  63
  64 #define DRIVER_DESC             "Ethernet Gadget"
  65 #define DRIVER_VERSION          "Memorial Day 2008"
  66
  67 #ifdef USB_ETH_RNDIS
  68 #define PREFIX                  "RNDIS/"
  69 #else
  70 #define PREFIX                  ""
  71 #endif
  72
  73 /*
  74  * This driver aims for interoperability by using CDC ECM unless
  75  *
  76  *              can_support_ecm()
  77  *
  78  * returns false, in which case it supports the CDC Subset.  By default,
  79  * that returns true; most hardware has no problems with CDC ECM, that's
  80  * a good default.  Previous versions of this driver had no default; this
  81  * version changes that, removing overhead for new controller support.
  82  *
  83  *      IF YOUR HARDWARE CAN'T SUPPORT CDC ECM, UPDATE THAT ROUTINE!
  84  */
  85
  86 static inline bool has_rndis(void)
  87 {
  88 #ifdef  USB_ETH_RNDIS
  89         return true;
  90 #else
  91         return false;
  92 #endif
  93 }
  94
  95 #include <linux/module.h>
  96
  97 #include "u_ecm.h"
  98 #include "u_gether.h"
  99 #ifdef  USB_ETH_RNDIS
 100 #include "u_rndis.h"
 101 #include "rndis.h"
 102 #else
 103 #define rndis_borrow_net(...) do {} while (0)
 104 #endif
 105 #include "u_eem.h"
 106
 107 /*-------------------------------------------------------------------------*/
 108 USB_GADGET_COMPOSITE_OPTIONS();
 109
 110 USB_ETHERNET_MODULE_PARAMETERS();
 111
 112 /* DO NOT REUSE THESE IDs with a protocol-incompatible driver!!  Ever!!
 113  * Instead:  allocate your own, using normal USB-IF procedures.
 114  */
 115
 116 /* Thanks to NetChip Technologies for donating this product ID.
 117  * It's for devices with only CDC Ethernet configurations.
 118  */
 119 #define CDC_VENDOR_NUM          0x0525  /* NetChip */
 120 #define CDC_PRODUCT_NUM         0xa4a1  /* Linux-USB Ethernet Gadget */
 121
 122 /* For hardware that can't talk CDC, we use the same vendor ID that
 123  * ARM Linux has used for ethernet-over-usb, both with sa1100 and
 124  * with pxa250.  We're protocol-compatible, if the host-side drivers
 125  * use the endpoint descriptors.  bcdDevice (version) is nonzero, so
 126  * drivers that need to hard-wire endpoint numbers have a hook.
 127  *
 128  * The protocol is a minimal subset of CDC Ether, which works on any bulk
 129  * hardware that's not deeply broken ... even on hardware that can't talk
 130  * RNDIS (like SA-1100, with no interrupt endpoint, or anything that
 131  * doesn't handle control-OUT).
 132  */
 133 #define SIMPLE_VENDOR_NUM       0x049f
 134 #define SIMPLE_PRODUCT_NUM      0x505a
 135
 136 /* For hardware that can talk RNDIS and either of the above protocols,
 137  * use this ID ... the windows INF files will know it.  Unless it's
 138  * used with CDC Ethernet, Linux 2.4 hosts will need updates to choose
 139  * the non-RNDIS configuration.
 140  */
 141 #define RNDIS_VENDOR_NUM        0x0525  /* NetChip */
 142 #define RNDIS_PRODUCT_NUM       0xa4a2  /* Ethernet/RNDIS Gadget */
 143
 144 /* For EEM gadgets */
 145 #define EEM_VENDOR_NUM          0x1d6b  /* Linux Foundation */
 146 #define EEM_PRODUCT_NUM         0x0102  /* EEM Gadget */
 147
 148 /*-------------------------------------------------------------------------*/
 149
 150 static struct usb_device_descriptor device_desc = {
 151         .bLength =              sizeof device_desc,
 152         .bDescriptorType =      USB_DT_DEVICE,
 153
 154         /* .bcdUSB = DYNAMIC */
 155
 156         .bDeviceClass =         USB_CLASS_COMM,
 157         .bDeviceSubClass =      0,
 158         .bDeviceProtocol =      0,
 159         /* .bMaxPacketSize0 = f(hardware) */
 160
 161         /* Vendor and product id defaults change according to what configs
 162          * we support.  (As does bNumConfigurations.)  These values can
 163          * also be overridden by module parameters.
 164          */
 165         .idVendor =             cpu_to_le16 (CDC_VENDOR_NUM),
 166         .idProduct =            cpu_to_le16 (CDC_PRODUCT_NUM),
 167         /* .bcdDevice = f(hardware) */
 168         /* .iManufacturer = DYNAMIC */
 169         /* .iProduct = DYNAMIC */
 170         /* NO SERIAL NUMBER */
 171         .bNumConfigurations =   1,
 172 };
 173
 174 static const struct usb_descriptor_header *otg_desc[2];
 175
 176 static struct usb_string strings_dev[] = {
 177         [USB_GADGET_MANUFACTURER_IDX].s = "",
 178         [USB_GADGET_PRODUCT_IDX].s = PREFIX DRIVER_DESC,
 179         [USB_GADGET_SERIAL_IDX].s = "",
 180         {  } /* end of list */
 181 };
 182
 183 static struct usb_gadget_strings stringtab_dev = {
 184         .language       = 0x0409,       /* en-us */
 185         .strings        = strings_dev,
 186 };
 187
 188 static struct usb_gadget_strings *dev_strings[] = {
 189         &stringtab_dev,
 190         NULL,
 191 };
 192
 193 static struct usb_function_instance *fi_ecm;
 194 static struct usb_function *f_ecm;
 195
 196 static struct usb_function_instance *fi_eem;
 197 static struct usb_function *f_eem;
 198
 199 static struct usb_function_instance *fi_geth;
 200 static struct usb_function *f_geth;
 201
 202 static struct usb_function_instance *fi_rndis;
 203 static struct usb_function *f_rndis;
 204
 205 /*-------------------------------------------------------------------------*/
 206
 207 /*
 208  * We may not have an RNDIS configuration, but if we do it needs to be
 209  * the first one present.  That's to make Microsoft's drivers happy,
 210  * and to follow DOCSIS 1.0 (cable modem standard).
 211  */
 212 static int rndis_do_config(struct usb_configuration *c)
 213 {
 214         int status;
 215
 216         /* FIXME alloc iConfiguration string, set it in c->strings */
 217
 218         if (gadget_is_otg(c->cdev->gadget)) {
 219                 c->descriptors = otg_desc;
 220                 c->bmAttributes |= USB_CONFIG_ATT_WAKEUP;
 221         }
 222
 223         f_rndis = usb_get_function(fi_rndis);
 224         if (IS_ERR(f_rndis))
 225                 return PTR_ERR(f_rndis);
 226
 227         status = usb_add_function(c, f_rndis);
 228         if (status < 0)
 229                 usb_put_function(f_rndis);
 230
 231         return status;
 232 }
 233
 234 static struct usb_configuration rndis_config_driver = {
 235         .label                  = "RNDIS",
 236         .bConfigurationValue    = 2,
 237         /* .iConfiguration = DYNAMIC */
 238         .bmAttributes           = USB_CONFIG_ATT_SELFPOWER,
 239 };
 240
 241 /*-------------------------------------------------------------------------*/
 242
 243 #ifdef CONFIG_USB_ETH_EEM
 244 static bool use_eem = 1;
 245 #else
 246 static bool use_eem;
 247 #endif
 248 module_param(use_eem, bool, 0);
 249 MODULE_PARM_DESC(use_eem, "use CDC EEM mode");
 250
 251 /*
 252  * We _always_ have an ECM, CDC Subset, or EEM configuration.
 253  */
 254 static int eth_do_config(struct usb_configuration *c)
 255 {
 256         int status = 0;
 257
 258         /* FIXME alloc iConfiguration string, set it in c->strings */
 259
 260         if (gadget_is_otg(c->cdev->gadget)) {
 261                 c->descriptors = otg_desc;
 262                 c->bmAttributes |= USB_CONFIG_ATT_WAKEUP;
 263         }
 264
 265         if (use_eem) {
 266                 f_eem = usb_get_function(fi_eem);
 267                 if (IS_ERR(f_eem))
 268                         return PTR_ERR(f_eem);
 269
 270                 status = usb_add_function(c, f_eem);
 271                 if (status < 0)
 272                         usb_put_function(f_eem);
 273
 274                 return status;
 275         } else if (can_support_ecm(c->cdev->gadget)) {
 276                 f_ecm = usb_get_function(fi_ecm);
 277                 if (IS_ERR(f_ecm))
 278                         return PTR_ERR(f_ecm);
 279
 280                 status = usb_add_function(c, f_ecm);
 281                 if (status < 0)
 282                         usb_put_function(f_ecm);
 283
 284                 return status;
 285         } else {
 286                 f_geth = usb_get_function(fi_geth);
 287                 if (IS_ERR(f_geth))
 288                         return PTR_ERR(f_geth);
 289
 290                 status = usb_add_function(c, f_geth);
 291                 if (status < 0)
 292                         usb_put_function(f_geth);
 293
 294                 return status;
 295         }
 296
 297 }
 298
 299 static struct usb_configuration eth_config_driver = {
 300         /* .label = f(hardware) */
 301         .bConfigurationValue    = 1,
 302         /* .iConfiguration = DYNAMIC */
 303         .bmAttributes           = USB_CONFIG_ATT_SELFPOWER,
 304 };
 305
 306 /*-------------------------------------------------------------------------*/
 307
 308 static int eth_bind(struct usb_composite_dev *cdev)
 309 {
 310         struct usb_gadget       *gadget = cdev->gadget;
 311         struct f_eem_opts       *eem_opts = NULL;
 312         struct f_ecm_opts       *ecm_opts = NULL;
 313         struct f_gether_opts    *geth_opts = NULL;
 314         struct net_device       *net;
 315         int                     status;
 316
 317         /* set up main config label and device descriptor */
 318         if (use_eem) {
 319                 /* EEM */
 320                 fi_eem = usb_get_function_instance("eem");
 321                 if (IS_ERR(fi_eem))
 322                         return PTR_ERR(fi_eem);
 323
 324                 eem_opts = container_of(fi_eem, struct f_eem_opts, func_inst);
 325
 326                 net = eem_opts->net;
 327
 328                 eth_config_driver.label = "CDC Ethernet (EEM)";
 329                 device_desc.idVendor = cpu_to_le16(EEM_VENDOR_NUM);
 330                 device_desc.idProduct = cpu_to_le16(EEM_PRODUCT_NUM);
 331         } else if (can_support_ecm(gadget)) {
 332                 /* ECM */
 333
 334                 fi_ecm = usb_get_function_instance("ecm");
 335                 if (IS_ERR(fi_ecm))
 336                         return PTR_ERR(fi_ecm);
 337
 338                 ecm_opts = container_of(fi_ecm, struct f_ecm_opts, func_inst);
 339
 340                 net = ecm_opts->net;
 341
 342                 eth_config_driver.label = "CDC Ethernet (ECM)";
 343         } else {
 344                 /* CDC Subset */
 345
 346                 fi_geth = usb_get_function_instance("geth");
 347                 if (IS_ERR(fi_geth))
 348                         return PTR_ERR(fi_geth);
 349
 350                 geth_opts = container_of(fi_geth, struct f_gether_opts,
 351                                          func_inst);
 352
 353                 net = geth_opts->net;
 354
 355                 eth_config_driver.label = "CDC Subset/SAFE";
 356
 357                 device_desc.idVendor = cpu_to_le16(SIMPLE_VENDOR_NUM);
 358                 device_desc.idProduct = cpu_to_le16(SIMPLE_PRODUCT_NUM);
 359                 if (!has_rndis())
 360                         device_desc.bDeviceClass = USB_CLASS_VENDOR_SPEC;
 361         }
 362
 363         gether_set_qmult(net, qmult);
 364         if (!gether_set_host_addr(net, host_addr))
 365                 pr_info("using host ethernet address: %s", host_addr);
 366         if (!gether_set_dev_addr(net, dev_addr))
 367                 pr_info("using self ethernet address: %s", dev_addr);
 368
 369         if (has_rndis()) {
 370                 /* RNDIS plus ECM-or-Subset */
 371                 gether_set_gadget(net, cdev->gadget);
 372                 status = gether_register_netdev(net);
 373                 if (status)
 374                         goto fail;
 375
 376                 if (use_eem)
 377                         eem_opts->bound = true;
 378                 else if (can_support_ecm(gadget))
 379                         ecm_opts->bound = true;
 380                 else
 381                         geth_opts->bound = true;
 382
 383                 fi_rndis = usb_get_function_instance("rndis");
 384                 if (IS_ERR(fi_rndis)) {
 385                         status = PTR_ERR(fi_rndis);
 386                         goto fail;
 387                 }
 388
 389                 rndis_borrow_net(fi_rndis, net);
 390
 391                 device_desc.idVendor = cpu_to_le16(RNDIS_VENDOR_NUM);
 392                 device_desc.idProduct = cpu_to_le16(RNDIS_PRODUCT_NUM);
 393                 device_desc.bNumConfigurations = 2;
 394         }
 395
 396         /* Allocate string descriptor numbers ... note that string
 397          * contents can be overridden by the composite_dev glue.
 398          */
 399
 400         status = usb_string_ids_tab(cdev, strings_dev);
 401         if (status < 0)
 402                 goto fail1;
 403         device_desc.iManufacturer = strings_dev[USB_GADGET_MANUFACTURER_IDX].id;
 404         device_desc.iProduct = strings_dev[USB_GADGET_PRODUCT_IDX].id;
 405
 406         if (gadget_is_otg(gadget) && !otg_desc[0]) {
 407                 struct usb_descriptor_header *usb_desc;
 408
 409                 usb_desc = usb_otg_descriptor_alloc(gadget);
 410                 if (!usb_desc)
 411                         goto fail1;
 412                 usb_otg_descriptor_init(gadget, usb_desc);
 413                 otg_desc[0] = usb_desc;
 414                 otg_desc[1] = NULL;
 415         }
 416
 417         /* register our configuration(s); RNDIS first, if it's used */
 418         if (has_rndis()) {
 419                 status = usb_add_config(cdev, &rndis_config_driver,
 420                                 rndis_do_config);
 421                 if (status < 0)
 422                         goto fail2;
 423         }
 424
 425         status = usb_add_config(cdev, &eth_config_driver, eth_do_config);
 426         if (status < 0)
 427                 goto fail2;
 428
 429         usb_composite_overwrite_options(cdev, &coverwrite);
 430         dev_info(&gadget->dev, "%s, version: " DRIVER_VERSION "\n",
 431                         DRIVER_DESC);
 432
 433         return 0;
 434
 435 fail2:
 436         kfree(otg_desc[0]);
 437         otg_desc[0] = NULL;
 438 fail1:
 439         if (has_rndis())
 440                 usb_put_function_instance(fi_rndis);
 441 fail:
 442         if (use_eem)
 443                 usb_put_function_instance(fi_eem);
 444         else if (can_support_ecm(gadget))
 445                 usb_put_function_instance(fi_ecm);
 446         else
 447                 usb_put_function_instance(fi_geth);
 448         return status;
 449 }
 450
 451 static int eth_unbind(struct usb_composite_dev *cdev)
 452 {
 453         if (has_rndis()) {
 454                 usb_put_function(f_rndis);
 455                 usb_put_function_instance(fi_rndis);
 456         }
 457         if (use_eem) {
 458                 usb_put_function(f_eem);
 459                 usb_put_function_instance(fi_eem);
 460         } else if (can_support_ecm(cdev->gadget)) {
 461                 usb_put_function(f_ecm);
 462                 usb_put_function_instance(fi_ecm);
 463         } else {
 464                 usb_put_function(f_geth);
 465                 usb_put_function_instance(fi_geth);
 466         }
 467         kfree(otg_desc[0]);
 468         otg_desc[0] = NULL;
 469
 470         return 0;
 471 }
 472
 473 static struct usb_composite_driver eth_driver = {
 474         .name           = "g_ether",
 475         .dev            = &device_desc,
 476         .strings        = dev_strings,
 477         .max_speed      = USB_SPEED_SUPER,
 478         .bind           = eth_bind,
 479         .unbind         = eth_unbind,
 480 };
 481
 482 module_usb_composite_driver(eth_driver);
 483
 484 MODULE_DESCRIPTION(PREFIX DRIVER_DESC);
 485 MODULE_AUTHOR("David Brownell, Benedikt Spanger");
 486 MODULE_LICENSE("GPL");