drivers/usb/gadget/legacy/printer.c

   1 /*
   2  * printer.c -- Printer gadget driver
   3  *
   4  * Copyright (C) 2003-2005 David Brownell
   5  * Copyright (C) 2006 Craig W. Nadler
   6  *
   7  * This program is free software; you can redistribute it and/or modify
   8  * it under the terms of the GNU General Public License as published by
   9  * the Free Software Foundation; either version 2 of the License, or
  10  * (at your option) any later version.
  11  */
  12
  13 #include <linux/module.h>
  14 #include <linux/kernel.h>
  15 #include <asm/byteorder.h>
  16
  17 #include <linux/usb/ch9.h>
  18 #include <linux/usb/composite.h>
  19 #include <linux/usb/gadget.h>
  20 #include <linux/usb/g_printer.h>
  21
  22 #include "gadget_chips.h"
  23
  24 USB_GADGET_COMPOSITE_OPTIONS();
  25
  26 #define DRIVER_DESC             "Printer Gadget"
  27 #define DRIVER_VERSION          "2015 FEB 17"
  28
  29 static const char shortname [] = "printer";
  30 static const char driver_desc [] = DRIVER_DESC;
  31
  32 #include "u_printer.h"
  33
  34 /*-------------------------------------------------------------------------*/
  35
  36 /* DO NOT REUSE THESE IDs with a protocol-incompatible driver!!  Ever!!
  37  * Instead:  allocate your own, using normal USB-IF procedures.
  38  */
  39
  40 /* Thanks to NetChip Technologies for donating this product ID.
  41  */
  42 #define PRINTER_VENDOR_NUM      0x0525          /* NetChip */
  43 #define PRINTER_PRODUCT_NUM     0xa4a8          /* Linux-USB Printer Gadget */
  44
  45 /* Some systems will want different product identifiers published in the
  46  * device descriptor, either numbers or strings or both.  These string
  47  * parameters are in UTF-8 (superset of ASCII's 7 bit characters).
  48  */
  49
  50 module_param_named(iSerialNum, coverwrite.serial_number, charp, S_IRUGO);
  51 MODULE_PARM_DESC(iSerialNum, "1");
  52
  53 static char *iPNPstring;
  54 module_param(iPNPstring, charp, S_IRUGO);
  55 MODULE_PARM_DESC(iPNPstring, "MFG:linux;MDL:g_printer;CLS:PRINTER;SN:1;");
  56
  57 /* Number of requests to allocate per endpoint, not used for ep0. */
  58 static unsigned qlen = 10;
  59 module_param(qlen, uint, S_IRUGO|S_IWUSR);
  60
  61 #define QLEN    qlen
  62
  63 static struct usb_function_instance *fi_printer;
  64 static struct usb_function *f_printer;
  65
  66 /*-------------------------------------------------------------------------*/
  67
  68 /*
  69  * DESCRIPTORS ... most are static, but strings and (full) configuration
  70  * descriptors are built on demand.
  71  */
  72
  73 static struct usb_device_descriptor device_desc = {
  74         .bLength =              sizeof device_desc,
  75         .bDescriptorType =      USB_DT_DEVICE,
  76         .bcdUSB =               cpu_to_le16(0x0200),
  77         .bDeviceClass =         USB_CLASS_PER_INTERFACE,
  78         .bDeviceSubClass =      0,
  79         .bDeviceProtocol =      0,
  80         .idVendor =             cpu_to_le16(PRINTER_VENDOR_NUM),
  81         .idProduct =            cpu_to_le16(PRINTER_PRODUCT_NUM),
  82         .bNumConfigurations =   1
  83 };
  84
  85 static struct usb_otg_descriptor otg_descriptor = {
  86         .bLength =              sizeof otg_descriptor,
  87         .bDescriptorType =      USB_DT_OTG,
  88         .bmAttributes =         USB_OTG_SRP,
  89 };
  90
  91 static const struct usb_descriptor_header *otg_desc[] = {
  92         (struct usb_descriptor_header *) &otg_descriptor,
  93         NULL,
  94 };
  95
  96 /*-------------------------------------------------------------------------*/
  97
  98 /* descriptors that are built on-demand */
  99
 100 static char                             product_desc [40] = DRIVER_DESC;
 101 static char                             serial_num [40] = "1";
 102 static char                             pnp_string[PNP_STRING_LEN] =
 103         "XXMFG:linux;MDL:g_printer;CLS:PRINTER;SN:1;";
 104
 105 /* static strings, in UTF-8 */
 106 static struct usb_string                strings [] = {
 107         [USB_GADGET_MANUFACTURER_IDX].s = "",
 108         [USB_GADGET_PRODUCT_IDX].s = product_desc,
 109         [USB_GADGET_SERIAL_IDX].s =     serial_num,
 110         {  }            /* end of list */
 111 };
 112
 113 static struct usb_gadget_strings        stringtab_dev = {
 114         .language       = 0x0409,       /* en-us */
 115         .strings        = strings,
 116 };
 117
 118 static struct usb_gadget_strings *dev_strings[] = {
 119         &stringtab_dev,
 120         NULL,
 121 };
 122
 123 static struct usb_configuration printer_cfg_driver = {
 124         .label                  = "printer",
 125         .bConfigurationValue    = 1,
 126         .bmAttributes           = USB_CONFIG_ATT_ONE | USB_CONFIG_ATT_SELFPOWER,
 127 };
 128
 129 static int __init printer_do_config(struct usb_configuration *c)
 130 {
 131         struct usb_gadget       *gadget = c->cdev->gadget;
 132         int                     status = 0;
 133
 134         usb_ep_autoconfig_reset(gadget);
 135
 136         usb_gadget_set_selfpowered(gadget);
 137
 138         if (gadget_is_otg(gadget)) {
 139                 otg_descriptor.bmAttributes |= USB_OTG_HNP;
 140                 printer_cfg_driver.descriptors = otg_desc;
 141                 printer_cfg_driver.bmAttributes |= USB_CONFIG_ATT_WAKEUP;
 142         }
 143
 144         f_printer = usb_get_function(fi_printer);
 145         if (IS_ERR(f_printer))
 146                 return PTR_ERR(f_printer);
 147
 148         status = usb_add_function(c, f_printer);
 149         if (status < 0)
 150                 usb_put_function(f_printer);
 151
 152         return status;
 153 }
 154
 155 static int __init printer_bind(struct usb_composite_dev *cdev)
 156 {
 157         struct f_printer_opts *opts;
 158         int ret, len;
 159
 160         fi_printer = usb_get_function_instance("printer");
 161         if (IS_ERR(fi_printer))
 162                 return PTR_ERR(fi_printer);
 163
 164         if (iPNPstring)
 165                 strlcpy(&pnp_string[2], iPNPstring, PNP_STRING_LEN - 2);
 166
 167         len = strlen(pnp_string);
 168         pnp_string[0] = (len >> 8) & 0xFF;
 169         pnp_string[1] = len & 0xFF;
 170
 171         opts = container_of(fi_printer, struct f_printer_opts, func_inst);
 172         opts->minor = 0;
 173         memcpy(opts->pnp_string, pnp_string, PNP_STRING_LEN);
 174         opts->q_len = QLEN;
 175
 176         ret = usb_string_ids_tab(cdev, strings);
 177         if (ret < 0) {
 178                 usb_put_function_instance(fi_printer);
 179                 return ret;
 180         }
 181         device_desc.iManufacturer = strings[USB_GADGET_MANUFACTURER_IDX].id;
 182         device_desc.iProduct = strings[USB_GADGET_PRODUCT_IDX].id;
 183         device_desc.iSerialNumber = strings[USB_GADGET_SERIAL_IDX].id;
 184
 185         ret = usb_add_config(cdev, &printer_cfg_driver, printer_do_config);
 186         if (ret) {
 187                 usb_put_function_instance(fi_printer);
 188                 return ret;
 189         }
 190         usb_composite_overwrite_options(cdev, &coverwrite);
 191         return ret;
 192 }
 193
 194 static int __exit printer_unbind(struct usb_composite_dev *cdev)
 195 {
 196         usb_put_function(f_printer);
 197         usb_put_function_instance(fi_printer);
 198
 199         return 0;
 200 }
 201
 202 static __refdata struct usb_composite_driver printer_driver = {
 203         .name           = shortname,
 204         .dev            = &device_desc,
 205         .strings        = dev_strings,
 206         .max_speed      = USB_SPEED_SUPER,
 207         .bind           = printer_bind,
 208         .unbind         = printer_unbind,
 209 };
 210
 211 module_usb_composite_driver(printer_driver);
 212
 213 MODULE_DESCRIPTION(DRIVER_DESC);
 214 MODULE_AUTHOR("Craig Nadler");
 215 MODULE_LICENSE("GPL");