drivers/usb/gadget/legacy/zero.c

   1 /*
   2  * zero.c -- Gadget Zero, for USB development
   3  *
   4  * Copyright (C) 2003-2008 David Brownell
   5  * Copyright (C) 2008 by Nokia Corporation
   6  *
   7  * This program is free software; you can redistribute it and/or modify
   8  * it under the terms of the GNU General Public License as published by
   9  * the Free Software Foundation; either version 2 of the License, or
  10  * (at your option) any later version.
  11  */
  12
  13 /*
  14  * Gadget Zero only needs two bulk endpoints, and is an example of how you
  15  * can write a hardware-agnostic gadget driver running inside a USB device.
  16  * Some hardware details are visible, but don't affect most of the driver.
  17  *
  18  * Use it with the Linux host/master side "usbtest" driver to get a basic
  19  * functional test of your device-side usb stack, or with "usb-skeleton".
  20  *
  21  * It supports two similar configurations.  One sinks whatever the usb host
  22  * writes, and in return sources zeroes.  The other loops whatever the host
  23  * writes back, so the host can read it.
  24  *
  25  * Many drivers will only have one configuration, letting them be much
  26  * simpler if they also don't support high speed operation (like this
  27  * driver does).
  28  *
  29  * Why is *this* driver using two configurations, rather than setting up
  30  * two interfaces with different functions?  To help verify that multiple
  31  * configuration infrastructure is working correctly; also, so that it can
  32  * work with low capability USB controllers without four bulk endpoints.
  33  */
  34
  35 /*
  36  * driver assumes self-powered hardware, and
  37  * has no way for users to trigger remote wakeup.
  38  */
  39
  40 /* #define VERBOSE_DEBUG */
  41
  42 #include <linux/kernel.h>
  43 #include <linux/slab.h>
  44 #include <linux/device.h>
  45 #include <linux/module.h>
  46 #include <linux/err.h>
  47 #include <linux/usb/composite.h>
  48
  49 #include "g_zero.h"
  50 /*-------------------------------------------------------------------------*/
  51 USB_GADGET_COMPOSITE_OPTIONS();
  52
  53 #define DRIVER_VERSION          "Cinco de Mayo 2008"
  54
  55 static const char longname[] = "Gadget Zero";
  56
  57 /*
  58  * Normally the "loopback" configuration is second (index 1) so
  59  * it's not the default.  Here's where to change that order, to
  60  * work better with hosts where config changes are problematic or
  61  * controllers (like original superh) that only support one config.
  62  */
  63 static bool loopdefault = 0;
  64 module_param(loopdefault, bool, S_IRUGO|S_IWUSR);
  65
  66 static struct usb_zero_options gzero_options = {
  67         .isoc_interval = GZERO_ISOC_INTERVAL,
  68         .isoc_maxpacket = GZERO_ISOC_MAXPACKET,
  69         .bulk_buflen = GZERO_BULK_BUFLEN,
  70         .qlen = GZERO_QLEN,
  71         .ss_bulk_qlen = GZERO_SS_BULK_QLEN,
  72         .ss_iso_qlen = GZERO_SS_ISO_QLEN,
  73 };
  74
  75 /*-------------------------------------------------------------------------*/
  76
  77 /* Thanks to NetChip Technologies for donating this product ID.
  78  *
  79  * DO NOT REUSE THESE IDs with a protocol-incompatible driver!!  Ever!!
  80  * Instead:  allocate your own, using normal USB-IF procedures.
  81  */
  82 #ifndef CONFIG_USB_ZERO_HNPTEST
  83 #define DRIVER_VENDOR_NUM       0x0525          /* NetChip */
  84 #define DRIVER_PRODUCT_NUM      0xa4a0          /* Linux-USB "Gadget Zero" */
  85 #define DEFAULT_AUTORESUME      0
  86 #else
  87 #define DRIVER_VENDOR_NUM       0x1a0a          /* OTG test device IDs */
  88 #define DRIVER_PRODUCT_NUM      0xbadd
  89 #define DEFAULT_AUTORESUME      5
  90 #endif
  91
  92 /* If the optional "autoresume" mode is enabled, it provides good
  93  * functional coverage for the "USBCV" test harness from USB-IF.
  94  * It's always set if OTG mode is enabled.
  95  */
  96 static unsigned autoresume = DEFAULT_AUTORESUME;
  97 module_param(autoresume, uint, S_IRUGO);
  98 MODULE_PARM_DESC(autoresume, "zero, or seconds before remote wakeup");
  99
 100 /* Maximum Autoresume time */
 101 static unsigned max_autoresume;
 102 module_param(max_autoresume, uint, S_IRUGO);
 103 MODULE_PARM_DESC(max_autoresume, "maximum seconds before remote wakeup");
 104
 105 /* Interval between two remote wakeups */
 106 static unsigned autoresume_interval_ms;
 107 module_param(autoresume_interval_ms, uint, S_IRUGO);
 108 MODULE_PARM_DESC(autoresume_interval_ms,
 109                 "milliseconds to increase successive wakeup delays");
 110
 111 static unsigned autoresume_step_ms;
 112 /*-------------------------------------------------------------------------*/
 113
 114 static struct usb_device_descriptor device_desc = {
 115         .bLength =              sizeof device_desc,
 116         .bDescriptorType =      USB_DT_DEVICE,
 117
 118         /* .bcdUSB = DYNAMIC */
 119         .bDeviceClass =         USB_CLASS_VENDOR_SPEC,
 120
 121         .idVendor =             cpu_to_le16(DRIVER_VENDOR_NUM),
 122         .idProduct =            cpu_to_le16(DRIVER_PRODUCT_NUM),
 123         .bNumConfigurations =   2,
 124 };
 125
 126 static const struct usb_descriptor_header *otg_desc[2];
 127
 128 /* string IDs are assigned dynamically */
 129 /* default serial number takes at least two packets */
 130 static char serial[] = "0123456789.0123456789.0123456789";
 131
 132 #define USB_GZERO_SS_DESC       (USB_GADGET_FIRST_AVAIL_IDX + 0)
 133 #define USB_GZERO_LB_DESC       (USB_GADGET_FIRST_AVAIL_IDX + 1)
 134
 135 static struct usb_string strings_dev[] = {
 136         [USB_GADGET_MANUFACTURER_IDX].s = "",
 137         [USB_GADGET_PRODUCT_IDX].s = longname,
 138         [USB_GADGET_SERIAL_IDX].s = serial,
 139         [USB_GZERO_SS_DESC].s   = "source and sink data",
 140         [USB_GZERO_LB_DESC].s   = "loop input to output",
 141         {  }                    /* end of list */
 142 };
 143
 144 static struct usb_gadget_strings stringtab_dev = {
 145         .language       = 0x0409,       /* en-us */
 146         .strings        = strings_dev,
 147 };
 148
 149 static struct usb_gadget_strings *dev_strings[] = {
 150         &stringtab_dev,
 151         NULL,
 152 };
 153
 154 /*-------------------------------------------------------------------------*/
 155
 156 static struct timer_list        autoresume_timer;
 157
 158 static void zero_autoresume(unsigned long _c)
 159 {
 160         struct usb_composite_dev        *cdev = (void *)_c;
 161         struct usb_gadget               *g = cdev->gadget;
 162
 163         /* unconfigured devices can't issue wakeups */
 164         if (!cdev->config)
 165                 return;
 166
 167         /* Normally the host would be woken up for something
 168          * more significant than just a timer firing; likely
 169          * because of some direct user request.
 170          */
 171         if (g->speed != USB_SPEED_UNKNOWN) {
 172                 int status = usb_gadget_wakeup(g);
 173                 INFO(cdev, "%s --> %d\n", __func__, status);
 174         }
 175 }
 176
 177 static void zero_suspend(struct usb_composite_dev *cdev)
 178 {
 179         if (cdev->gadget->speed == USB_SPEED_UNKNOWN)
 180                 return;
 181
 182         if (autoresume) {
 183                 if (max_autoresume &&
 184                         (autoresume_step_ms > max_autoresume * 1000))
 185                                 autoresume_step_ms = autoresume * 1000;
 186
 187                 mod_timer(&autoresume_timer, jiffies +
 188                         msecs_to_jiffies(autoresume_step_ms));
 189                 DBG(cdev, "suspend, wakeup in %d milliseconds\n",
 190                         autoresume_step_ms);
 191
 192                 autoresume_step_ms += autoresume_interval_ms;
 193         } else
 194                 DBG(cdev, "%s\n", __func__);
 195 }
 196
 197 static void zero_resume(struct usb_composite_dev *cdev)
 198 {
 199         DBG(cdev, "%s\n", __func__);
 200         del_timer(&autoresume_timer);
 201 }
 202
 203 /*-------------------------------------------------------------------------*/
 204
 205 static struct usb_configuration loopback_driver = {
 206         .label          = "loopback",
 207         .bConfigurationValue = 2,
 208         .bmAttributes   = USB_CONFIG_ATT_SELFPOWER,
 209         /* .iConfiguration = DYNAMIC */
 210 };
 211
 212 static struct usb_function *func_ss;
 213 static struct usb_function_instance *func_inst_ss;
 214
 215 static int ss_config_setup(struct usb_configuration *c,
 216                 const struct usb_ctrlrequest *ctrl)
 217 {
 218         switch (ctrl->bRequest) {
 219         case 0x5b:
 220         case 0x5c:
 221                 return func_ss->setup(func_ss, ctrl);
 222         default:
 223                 return -EOPNOTSUPP;
 224         }
 225 }
 226
 227 static struct usb_configuration sourcesink_driver = {
 228         .label                  = "source/sink",
 229         .setup                  = ss_config_setup,
 230         .bConfigurationValue    = 3,
 231         .bmAttributes           = USB_CONFIG_ATT_SELFPOWER,
 232         /* .iConfiguration      = DYNAMIC */
 233 };
 234
 235 module_param_named(buflen, gzero_options.bulk_buflen, uint, 0);
 236 module_param_named(pattern, gzero_options.pattern, uint, S_IRUGO|S_IWUSR);
 237 MODULE_PARM_DESC(pattern, "0 = all zeroes, 1 = mod63, 2 = none");
 238
 239 module_param_named(isoc_interval, gzero_options.isoc_interval, uint,
 240                 S_IRUGO|S_IWUSR);
 241 MODULE_PARM_DESC(isoc_interval, "1 - 16");
 242
 243 module_param_named(isoc_maxpacket, gzero_options.isoc_maxpacket, uint,
 244                 S_IRUGO|S_IWUSR);
 245 MODULE_PARM_DESC(isoc_maxpacket, "0 - 1023 (fs), 0 - 1024 (hs/ss)");
 246
 247 module_param_named(isoc_mult, gzero_options.isoc_mult, uint, S_IRUGO|S_IWUSR);
 248 MODULE_PARM_DESC(isoc_mult, "0 - 2 (hs/ss only)");
 249
 250 module_param_named(isoc_maxburst, gzero_options.isoc_maxburst, uint,
 251                 S_IRUGO|S_IWUSR);
 252 MODULE_PARM_DESC(isoc_maxburst, "0 - 15 (ss only)");
 253
 254 static struct usb_function *func_lb;
 255 static struct usb_function_instance *func_inst_lb;
 256
 257 module_param_named(qlen, gzero_options.qlen, uint, S_IRUGO|S_IWUSR);
 258 MODULE_PARM_DESC(qlen, "depth of loopback queue");
 259
 260 module_param_named(ss_bulk_qlen, gzero_options.ss_bulk_qlen, uint,
 261                 S_IRUGO|S_IWUSR);
 262 MODULE_PARM_DESC(bulk_qlen, "depth of sourcesink queue for bulk transfer");
 263
 264 module_param_named(ss_iso_qlen, gzero_options.ss_iso_qlen, uint,
 265                 S_IRUGO|S_IWUSR);
 266 MODULE_PARM_DESC(iso_qlen, "depth of sourcesink queue for iso transfer");
 267
 268 static int zero_bind(struct usb_composite_dev *cdev)
 269 {
 270         struct f_ss_opts        *ss_opts;
 271         struct f_lb_opts        *lb_opts;
 272         int                     status;
 273
 274         /* Allocate string descriptor numbers ... note that string
 275          * contents can be overridden by the composite_dev glue.
 276          */
 277         status = usb_string_ids_tab(cdev, strings_dev);
 278         if (status < 0)
 279                 return status;
 280
 281         device_desc.iManufacturer = strings_dev[USB_GADGET_MANUFACTURER_IDX].id;
 282         device_desc.iProduct = strings_dev[USB_GADGET_PRODUCT_IDX].id;
 283         device_desc.iSerialNumber = strings_dev[USB_GADGET_SERIAL_IDX].id;
 284
 285         setup_timer(&autoresume_timer, zero_autoresume, (unsigned long) cdev);
 286
 287         func_inst_ss = usb_get_function_instance("SourceSink");
 288         if (IS_ERR(func_inst_ss))
 289                 return PTR_ERR(func_inst_ss);
 290
 291         ss_opts =  container_of(func_inst_ss, struct f_ss_opts, func_inst);
 292         ss_opts->pattern = gzero_options.pattern;
 293         ss_opts->isoc_interval = gzero_options.isoc_interval;
 294         ss_opts->isoc_maxpacket = gzero_options.isoc_maxpacket;
 295         ss_opts->isoc_mult = gzero_options.isoc_mult;
 296         ss_opts->isoc_maxburst = gzero_options.isoc_maxburst;
 297         ss_opts->bulk_buflen = gzero_options.bulk_buflen;
 298         ss_opts->bulk_qlen = gzero_options.ss_bulk_qlen;
 299         ss_opts->iso_qlen = gzero_options.ss_iso_qlen;
 300
 301         func_ss = usb_get_function(func_inst_ss);
 302         if (IS_ERR(func_ss)) {
 303                 status = PTR_ERR(func_ss);
 304                 goto err_put_func_inst_ss;
 305         }
 306
 307         func_inst_lb = usb_get_function_instance("Loopback");
 308         if (IS_ERR(func_inst_lb)) {
 309                 status = PTR_ERR(func_inst_lb);
 310                 goto err_put_func_ss;
 311         }
 312
 313         lb_opts = container_of(func_inst_lb, struct f_lb_opts, func_inst);
 314         lb_opts->bulk_buflen = gzero_options.bulk_buflen;
 315         lb_opts->qlen = gzero_options.qlen;
 316
 317         func_lb = usb_get_function(func_inst_lb);
 318         if (IS_ERR(func_lb)) {
 319                 status = PTR_ERR(func_lb);
 320                 goto err_put_func_inst_lb;
 321         }
 322
 323         sourcesink_driver.iConfiguration = strings_dev[USB_GZERO_SS_DESC].id;
 324         loopback_driver.iConfiguration = strings_dev[USB_GZERO_LB_DESC].id;
 325
 326         /* support autoresume for remote wakeup testing */
 327         sourcesink_driver.bmAttributes &= ~USB_CONFIG_ATT_WAKEUP;
 328         loopback_driver.bmAttributes &= ~USB_CONFIG_ATT_WAKEUP;
 329         sourcesink_driver.descriptors = NULL;
 330         loopback_driver.descriptors = NULL;
 331         if (autoresume) {
 332                 sourcesink_driver.bmAttributes |= USB_CONFIG_ATT_WAKEUP;
 333                 loopback_driver.bmAttributes |= USB_CONFIG_ATT_WAKEUP;
 334                 autoresume_step_ms = autoresume * 1000;
 335         }
 336
 337         /* support OTG systems */
 338         if (gadget_is_otg(cdev->gadget)) {
 339                 if (!otg_desc[0]) {
 340                         struct usb_descriptor_header *usb_desc;
 341
 342                         usb_desc = usb_otg_descriptor_alloc(cdev->gadget);
 343                         if (!usb_desc) {
 344                                 status = -ENOMEM;
 345                                 goto err_conf_flb;
 346                         }
 347                         usb_otg_descriptor_init(cdev->gadget, usb_desc);
 348                         otg_desc[0] = usb_desc;
 349                         otg_desc[1] = NULL;
 350                 }
 351                 sourcesink_driver.descriptors = otg_desc;
 352                 sourcesink_driver.bmAttributes |= USB_CONFIG_ATT_WAKEUP;
 353                 loopback_driver.descriptors = otg_desc;
 354                 loopback_driver.bmAttributes |= USB_CONFIG_ATT_WAKEUP;
 355         }
 356
 357         /* Register primary, then secondary configuration.  Note that
 358          * SH3 only allows one config...
 359          */
 360         if (loopdefault) {
 361                 usb_add_config_only(cdev, &loopback_driver);
 362                 usb_add_config_only(cdev, &sourcesink_driver);
 363         } else {
 364                 usb_add_config_only(cdev, &sourcesink_driver);
 365                 usb_add_config_only(cdev, &loopback_driver);
 366         }
 367         status = usb_add_function(&sourcesink_driver, func_ss);
 368         if (status)
 369                 goto err_free_otg_desc;
 370
 371         usb_ep_autoconfig_reset(cdev->gadget);
 372         status = usb_add_function(&loopback_driver, func_lb);
 373         if (status)
 374                 goto err_free_otg_desc;
 375
 376         usb_ep_autoconfig_reset(cdev->gadget);
 377         usb_composite_overwrite_options(cdev, &coverwrite);
 378
 379         INFO(cdev, "%s, version: " DRIVER_VERSION "\n", longname);
 380
 381         return 0;
 382
 383 err_free_otg_desc:
 384         kfree(otg_desc[0]);
 385         otg_desc[0] = NULL;
 386 err_conf_flb:
 387         usb_put_function(func_lb);
 388         func_lb = NULL;
 389 err_put_func_inst_lb:
 390         usb_put_function_instance(func_inst_lb);
 391         func_inst_lb = NULL;
 392 err_put_func_ss:
 393         usb_put_function(func_ss);
 394         func_ss = NULL;
 395 err_put_func_inst_ss:
 396         usb_put_function_instance(func_inst_ss);
 397         func_inst_ss = NULL;
 398         return status;
 399 }
 400
 401 static int zero_unbind(struct usb_composite_dev *cdev)
 402 {
 403         del_timer_sync(&autoresume_timer);
 404         if (!IS_ERR_OR_NULL(func_ss))
 405                 usb_put_function(func_ss);
 406         usb_put_function_instance(func_inst_ss);
 407         if (!IS_ERR_OR_NULL(func_lb))
 408                 usb_put_function(func_lb);
 409         usb_put_function_instance(func_inst_lb);
 410         kfree(otg_desc[0]);
 411         otg_desc[0] = NULL;
 412
 413         return 0;
 414 }
 415
 416 static struct usb_composite_driver zero_driver = {
 417         .name           = "zero",
 418         .dev            = &device_desc,
 419         .strings        = dev_strings,
 420         .max_speed      = USB_SPEED_SUPER,
 421         .bind           = zero_bind,
 422         .unbind         = zero_unbind,
 423         .suspend        = zero_suspend,
 424         .resume         = zero_resume,
 425 };
 426
 427 module_usb_composite_driver(zero_driver);
 428
 429 MODULE_AUTHOR("David Brownell");
 430 MODULE_LICENSE("GPL");