projects / deliverable / linux.git / blob
? search:
summary | shortlog | log | commit | commitdiff | tree
blame | history | raw | HEAD
Merge remote-tracking branches 'asoc/topic/intel', 'asoc/topic/kirkwood', 'asoc/topic...
[deliverable/linux.git] / drivers / usb / gadget / pxa25x_udc.c
1 /*
2 * Intel PXA25x and IXP4xx on-chip full speed USB device controllers
3 *
4 * Copyright (C) 2002 Intrinsyc, Inc. (Frank Becker)
5 * Copyright (C) 2003 Robert Schwebel, Pengutronix
6 * Copyright (C) 2003 Benedikt Spranger, Pengutronix
7 * Copyright (C) 2003 David Brownell
8 * Copyright (C) 2003 Joshua Wise
9 *
10 * This program is free software; you can redistribute it and/or modify
11 * it under the terms of the GNU General Public License as published by
12 * the Free Software Foundation; either version 2 of the License, or
13 * (at your option) any later version.
14 */
15
16 /* #define VERBOSE_DEBUG */
17
18 #include <linux/device.h>
19 #include <linux/module.h>
20 #include <linux/kernel.h>
21 #include <linux/ioport.h>
22 #include <linux/types.h>
23 #include <linux/errno.h>
24 #include <linux/err.h>
25 #include <linux/delay.h>
26 #include <linux/slab.h>
27 #include <linux/timer.h>
28 #include <linux/list.h>
29 #include <linux/interrupt.h>
30 #include <linux/mm.h>
31 #include <linux/platform_data/pxa2xx_udc.h>
32 #include <linux/platform_device.h>
33 #include <linux/dma-mapping.h>
34 #include <linux/irq.h>
35 #include <linux/clk.h>
36 #include <linux/seq_file.h>
37 #include <linux/debugfs.h>
38 #include <linux/io.h>
39 #include <linux/prefetch.h>
40
41 #include <asm/byteorder.h>
42 #include <asm/dma.h>
43 #include <asm/gpio.h>
44 #include <asm/mach-types.h>
45 #include <asm/unaligned.h>
46
47 #include <linux/usb/ch9.h>
48 #include <linux/usb/gadget.h>
49 #include <linux/usb/otg.h>
50
51 /*
52 * This driver is PXA25x only. Grab the right register definitions.
53 */
54 #ifdef CONFIG_ARCH_PXA
55 #include <mach/pxa25x-udc.h>
56 #include <mach/hardware.h>
57 #endif
58
59 #ifdef CONFIG_ARCH_LUBBOCK
60 #include <mach/lubbock.h>
61 #endif
62
63 /*
64 * This driver handles the USB Device Controller (UDC) in Intel's PXA 25x
65 * series processors. The UDC for the IXP 4xx series is very similar.
66 * There are fifteen endpoints, in addition to ep0.
67 *
68 * Such controller drivers work with a gadget driver. The gadget driver
69 * returns descriptors, implements configuration and data protocols used
70 * by the host to interact with this device, and allocates endpoints to
71 * the different protocol interfaces. The controller driver virtualizes
72 * usb hardware so that the gadget drivers will be more portable.
73 *
74 * This UDC hardware wants to implement a bit too much USB protocol, so
75 * it constrains the sorts of USB configuration change events that work.
76 * The errata for these chips are misleading; some "fixed" bugs from
77 * pxa250 a0/a1 b0/b1/b2 sure act like they're still there.
78 *
79 * Note that the UDC hardware supports DMA (except on IXP) but that's
80 * not used here. IN-DMA (to host) is simple enough, when the data is
81 * suitably aligned (16 bytes) ... the network stack doesn't do that,
82 * other software can. OUT-DMA is buggy in most chip versions, as well
83 * as poorly designed (data toggle not automatic). So this driver won't
84 * bother using DMA. (Mostly-working IN-DMA support was available in
85 * kernels before 2.6.23, but was never enabled or well tested.)
86 */
87
88 #define DRIVER_VERSION "30-June-2007"
89 #define DRIVER_DESC "PXA 25x USB Device Controller driver"
90
91
92 static const char driver_name [] = "pxa25x_udc";
93
94 static const char ep0name [] = "ep0";
95
96
97 #ifdef CONFIG_ARCH_IXP4XX
98
99 /* cpu-specific register addresses are compiled in to this code */
100 #ifdef CONFIG_ARCH_PXA
101 #error "Can't configure both IXP and PXA"
102 #endif
103
104 /* IXP doesn't yet support <linux/clk.h> */
105 #define clk_get(dev,name) NULL
106 #define clk_enable(clk) do { } while (0)
107 #define clk_disable(clk) do { } while (0)
108 #define clk_put(clk) do { } while (0)
109
110 #endif
111
112 #include "pxa25x_udc.h"
113
114
115 #ifdef CONFIG_USB_PXA25X_SMALL
116 #define SIZE_STR " (small)"
117 #else
118 #define SIZE_STR ""
119 #endif
120
121 /* ---------------------------------------------------------------------------
122 * endpoint related parts of the api to the usb controller hardware,
123 * used by gadget driver; and the inner talker-to-hardware core.
124 * ---------------------------------------------------------------------------
125 */
126
127 static void pxa25x_ep_fifo_flush (struct usb_ep *ep);
128 static void nuke (struct pxa25x_ep *, int status);
129
130 /* one GPIO should control a D+ pullup, so host sees this device (or not) */
131 static void pullup_off(void)
132 {
133 struct pxa2xx_udc_mach_info *mach = the_controller->mach;
134 int off_level = mach->gpio_pullup_inverted;
135
136 if (gpio_is_valid(mach->gpio_pullup))
137 gpio_set_value(mach->gpio_pullup, off_level);
138 else if (mach->udc_command)
139 mach->udc_command(PXA2XX_UDC_CMD_DISCONNECT);
140 }
141
142 static void pullup_on(void)
143 {
144 struct pxa2xx_udc_mach_info *mach = the_controller->mach;
145 int on_level = !mach->gpio_pullup_inverted;
146
147 if (gpio_is_valid(mach->gpio_pullup))
148 gpio_set_value(mach->gpio_pullup, on_level);
149 else if (mach->udc_command)
150 mach->udc_command(PXA2XX_UDC_CMD_CONNECT);
151 }
152
153 static void pio_irq_enable(int bEndpointAddress)
154 {
155 bEndpointAddress &= 0xf;
156 if (bEndpointAddress < 8)
157 UICR0 &= ~(1 << bEndpointAddress);
158 else {
159 bEndpointAddress -= 8;
160 UICR1 &= ~(1 << bEndpointAddress);
161 }
162 }
163
164 static void pio_irq_disable(int bEndpointAddress)
165 {
166 bEndpointAddress &= 0xf;
167 if (bEndpointAddress < 8)
168 UICR0 |= 1 << bEndpointAddress;
169 else {
170 bEndpointAddress -= 8;
171 UICR1 |= 1 << bEndpointAddress;
172 }
173 }
174
175 /* The UDCCR reg contains mask and interrupt status bits,
176 * so using '|=' isn't safe as it may ack an interrupt.
177 */
178 #define UDCCR_MASK_BITS (UDCCR_REM | UDCCR_SRM | UDCCR_UDE)
179
180 static inline void udc_set_mask_UDCCR(int mask)
181 {
182 UDCCR = (UDCCR & UDCCR_MASK_BITS) | (mask & UDCCR_MASK_BITS);
183 }
184
185 static inline void udc_clear_mask_UDCCR(int mask)
186 {
187 UDCCR = (UDCCR & UDCCR_MASK_BITS) & ~(mask & UDCCR_MASK_BITS);
188 }
189
190 static inline void udc_ack_int_UDCCR(int mask)
191 {
192 /* udccr contains the bits we dont want to change */
193 __u32 udccr = UDCCR & UDCCR_MASK_BITS;
194
195 UDCCR = udccr | (mask & ~UDCCR_MASK_BITS);
196 }
197
198 /*
199 * endpoint enable/disable
200 *
201 * we need to verify the descriptors used to enable endpoints. since pxa25x
202 * endpoint configurations are fixed, and are pretty much always enabled,
203 * there's not a lot to manage here.
204 *
205 * because pxa25x can't selectively initialize bulk (or interrupt) endpoints,
206 * (resetting endpoint halt and toggle), SET_INTERFACE is unusable except
207 * for a single interface (with only the default altsetting) and for gadget
208 * drivers that don't halt endpoints (not reset by set_interface). that also
209 * means that if you use ISO, you must violate the USB spec rule that all
210 * iso endpoints must be in non-default altsettings.
211 */
212 static int pxa25x_ep_enable (struct usb_ep *_ep,
213 const struct usb_endpoint_descriptor *desc)
214 {
215 struct pxa25x_ep *ep;
216 struct pxa25x_udc *dev;
217
218 ep = container_of (_ep, struct pxa25x_ep, ep);
219 if (!_ep || !desc || _ep->name == ep0name
220 || desc->bDescriptorType != USB_DT_ENDPOINT
221 || ep->bEndpointAddress != desc->bEndpointAddress
222 || ep->fifo_size < usb_endpoint_maxp (desc)) {
223 DMSG("%s, bad ep or descriptor\n", __func__);
224 return -EINVAL;
225 }
226
227 /* xfer types must match, except that interrupt ~= bulk */
228 if (ep->bmAttributes != desc->bmAttributes
229 && ep->bmAttributes != USB_ENDPOINT_XFER_BULK
230 && desc->bmAttributes != USB_ENDPOINT_XFER_INT) {
231 DMSG("%s, %s type mismatch\n", __func__, _ep->name);
232 return -EINVAL;
233 }
234
235 /* hardware _could_ do smaller, but driver doesn't */
236 if ((desc->bmAttributes == USB_ENDPOINT_XFER_BULK
237 && usb_endpoint_maxp (desc)
238 != BULK_FIFO_SIZE)
239 || !desc->wMaxPacketSize) {
240 DMSG("%s, bad %s maxpacket\n", __func__, _ep->name);
241 return -ERANGE;
242 }
243
244 dev = ep->dev;
245 if (!dev->driver || dev->gadget.speed == USB_SPEED_UNKNOWN) {
246 DMSG("%s, bogus device state\n", __func__);
247 return -ESHUTDOWN;
248 }
249
250 ep->ep.desc = desc;
251 ep->stopped = 0;
252 ep->pio_irqs = 0;
253 ep->ep.maxpacket = usb_endpoint_maxp (desc);
254
255 /* flush fifo (mostly for OUT buffers) */
256 pxa25x_ep_fifo_flush (_ep);
257
258 /* ... reset halt state too, if we could ... */
259
260 DBG(DBG_VERBOSE, "enabled %s\n", _ep->name);
261 return 0;
262 }
263
264 static int pxa25x_ep_disable (struct usb_ep *_ep)
265 {
266 struct pxa25x_ep *ep;
267 unsigned long flags;
268
269 ep = container_of (_ep, struct pxa25x_ep, ep);
270 if (!_ep || !ep->ep.desc) {
271 DMSG("%s, %s not enabled\n", __func__,
272 _ep ? ep->ep.name : NULL);
273 return -EINVAL;
274 }
275 local_irq_save(flags);
276
277 nuke (ep, -ESHUTDOWN);
278
279 /* flush fifo (mostly for IN buffers) */
280 pxa25x_ep_fifo_flush (_ep);
281
282 ep->ep.desc = NULL;
283 ep->stopped = 1;
284
285 local_irq_restore(flags);
286 DBG(DBG_VERBOSE, "%s disabled\n", _ep->name);
287 return 0;
288 }
289
290 /*-------------------------------------------------------------------------*/
291
292 /* for the pxa25x, these can just wrap kmalloc/kfree. gadget drivers
293 * must still pass correctly initialized endpoints, since other controller
294 * drivers may care about how it's currently set up (dma issues etc).
295 */
296
297 /*
298 * pxa25x_ep_alloc_request - allocate a request data structure
299 */
300 static struct usb_request *
301 pxa25x_ep_alloc_request (struct usb_ep *_ep, gfp_t gfp_flags)
302 {
303 struct pxa25x_request *req;
304
305 req = kzalloc(sizeof(*req), gfp_flags);
306 if (!req)
307 return NULL;
308
309 INIT_LIST_HEAD (&req->queue);
310 return &req->req;
311 }
312
313
314 /*
315 * pxa25x_ep_free_request - deallocate a request data structure
316 */
317 static void
318 pxa25x_ep_free_request (struct usb_ep *_ep, struct usb_request *_req)
319 {
320 struct pxa25x_request *req;
321
322 req = container_of (_req, struct pxa25x_request, req);
323 WARN_ON(!list_empty (&req->queue));
324 kfree(req);
325 }
326
327 /*-------------------------------------------------------------------------*/
328
329 /*
330 * done - retire a request; caller blocked irqs
331 */
332 static void done(struct pxa25x_ep *ep, struct pxa25x_request *req, int status)
333 {
334 unsigned stopped = ep->stopped;
335
336 list_del_init(&req->queue);
337
338 if (likely (req->req.status == -EINPROGRESS))
339 req->req.status = status;
340 else
341 status = req->req.status;
342
343 if (status && status != -ESHUTDOWN)
344 DBG(DBG_VERBOSE, "complete %s req %p stat %d len %u/%u\n",
345 ep->ep.name, &req->req, status,
346 req->req.actual, req->req.length);
347
348 /* don't modify queue heads during completion callback */
349 ep->stopped = 1;
350 req->req.complete(&ep->ep, &req->req);
351 ep->stopped = stopped;
352 }
353
354
355 static inline void ep0_idle (struct pxa25x_udc *dev)
356 {
357 dev->ep0state = EP0_IDLE;
358 }
359
360 static int
361 write_packet(volatile u32 *uddr, struct pxa25x_request *req, unsigned max)
362 {
363 u8 *buf;
364 unsigned length, count;
365
366 buf = req->req.buf + req->req.actual;
367 prefetch(buf);
368
369 /* how big will this packet be? */
370 length = min(req->req.length - req->req.actual, max);
371 req->req.actual += length;
372
373 count = length;
374 while (likely(count--))
375 *uddr = *buf++;
376
377 return length;
378 }
379
380 /*
381 * write to an IN endpoint fifo, as many packets as possible.
382 * irqs will use this to write the rest later.
383 * caller guarantees at least one packet buffer is ready (or a zlp).
384 */
385 static int
386 write_fifo (struct pxa25x_ep *ep, struct pxa25x_request *req)
387 {
388 unsigned max;
389
390 max = usb_endpoint_maxp(ep->ep.desc);
391 do {
392 unsigned count;
393 int is_last, is_short;
394
395 count = write_packet(ep->reg_uddr, req, max);
396
397 /* last packet is usually short (or a zlp) */
398 if (unlikely (count != max))
399 is_last = is_short = 1;
400 else {
401 if (likely(req->req.length != req->req.actual)
402 || req->req.zero)
403 is_last = 0;
404 else
405 is_last = 1;
406 /* interrupt/iso maxpacket may not fill the fifo */
407 is_short = unlikely (max < ep->fifo_size);
408 }
409
410 DBG(DBG_VERY_NOISY, "wrote %s %d bytes%s%s %d left %p\n",
411 ep->ep.name, count,
412 is_last ? "/L" : "", is_short ? "/S" : "",
413 req->req.length - req->req.actual, req);
414
415 /* let loose that packet. maybe try writing another one,
416 * double buffering might work. TSP, TPC, and TFS
417 * bit values are the same for all normal IN endpoints.
418 */
419 *ep->reg_udccs = UDCCS_BI_TPC;
420 if (is_short)
421 *ep->reg_udccs = UDCCS_BI_TSP;
422
423 /* requests complete when all IN data is in the FIFO */
424 if (is_last) {
425 done (ep, req, 0);
426 if (list_empty(&ep->queue))
427 pio_irq_disable (ep->bEndpointAddress);
428 return 1;
429 }
430
431 // TODO experiment: how robust can fifo mode tweaking be?
432 // double buffering is off in the default fifo mode, which
433 // prevents TFS from being set here.
434
435 } while (*ep->reg_udccs & UDCCS_BI_TFS);
436 return 0;
437 }
438
439 /* caller asserts req->pending (ep0 irq status nyet cleared); starts
440 * ep0 data stage. these chips want very simple state transitions.
441 */
442 static inline
443 void ep0start(struct pxa25x_udc *dev, u32 flags, const char *tag)
444 {
445 UDCCS0 = flags|UDCCS0_SA|UDCCS0_OPR;
446 USIR0 = USIR0_IR0;
447 dev->req_pending = 0;
448 DBG(DBG_VERY_NOISY, "%s %s, %02x/%02x\n",
449 __func__, tag, UDCCS0, flags);
450 }
451
452 static int
453 write_ep0_fifo (struct pxa25x_ep *ep, struct pxa25x_request *req)
454 {
455 unsigned count;
456 int is_short;
457
458 count = write_packet(&UDDR0, req, EP0_FIFO_SIZE);
459 ep->dev->stats.write.bytes += count;
460
461 /* last packet "must be" short (or a zlp) */
462 is_short = (count != EP0_FIFO_SIZE);
463
464 DBG(DBG_VERY_NOISY, "ep0in %d bytes %d left %p\n", count,
465 req->req.length - req->req.actual, req);
466
467 if (unlikely (is_short)) {
468 if (ep->dev->req_pending)
469 ep0start(ep->dev, UDCCS0_IPR, "short IN");
470 else
471 UDCCS0 = UDCCS0_IPR;
472
473 count = req->req.length;
474 done (ep, req, 0);
475 ep0_idle(ep->dev);
476 #ifndef CONFIG_ARCH_IXP4XX
477 #if 1
478 /* This seems to get rid of lost status irqs in some cases:
479 * host responds quickly, or next request involves config
480 * change automagic, or should have been hidden, or ...
481 *
482 * FIXME get rid of all udelays possible...
483 */
484 if (count >= EP0_FIFO_SIZE) {
485 count = 100;
486 do {
487 if ((UDCCS0 & UDCCS0_OPR) != 0) {
488 /* clear OPR, generate ack */
489 UDCCS0 = UDCCS0_OPR;
490 break;
491 }
492 count--;
493 udelay(1);
494 } while (count);
495 }
496 #endif
497 #endif
498 } else if (ep->dev->req_pending)
499 ep0start(ep->dev, 0, "IN");
500 return is_short;
501 }
502
503
504 /*
505 * read_fifo - unload packet(s) from the fifo we use for usb OUT
506 * transfers and put them into the request. caller should have made
507 * sure there's at least one packet ready.
508 *
509 * returns true if the request completed because of short packet or the
510 * request buffer having filled (and maybe overran till end-of-packet).
511 */
512 static int
513 read_fifo (struct pxa25x_ep *ep, struct pxa25x_request *req)
514 {
515 for (;;) {
516 u32 udccs;
517 u8 *buf;
518 unsigned bufferspace, count, is_short;
519
520 /* make sure there's a packet in the FIFO.
521 * UDCCS_{BO,IO}_RPC are all the same bit value.
522 * UDCCS_{BO,IO}_RNE are all the same bit value.
523 */
524 udccs = *ep->reg_udccs;
525 if (unlikely ((udccs & UDCCS_BO_RPC) == 0))
526 break;
527 buf = req->req.buf + req->req.actual;
528 prefetchw(buf);
529 bufferspace = req->req.length - req->req.actual;
530
531 /* read all bytes from this packet */
532 if (likely (udccs & UDCCS_BO_RNE)) {
533 count = 1 + (0x0ff & *ep->reg_ubcr);
534 req->req.actual += min (count, bufferspace);
535 } else /* zlp */
536 count = 0;
537 is_short = (count < ep->ep.maxpacket);
538 DBG(DBG_VERY_NOISY, "read %s %02x, %d bytes%s req %p %d/%d\n",
539 ep->ep.name, udccs, count,
540 is_short ? "/S" : "",
541 req, req->req.actual, req->req.length);
542 while (likely (count-- != 0)) {
543 u8 byte = (u8) *ep->reg_uddr;
544
545 if (unlikely (bufferspace == 0)) {
546 /* this happens when the driver's buffer
547 * is smaller than what the host sent.
548 * discard the extra data.
549 */
550 if (req->req.status != -EOVERFLOW)
551 DMSG("%s overflow %d\n",
552 ep->ep.name, count);
553 req->req.status = -EOVERFLOW;
554 } else {
555 *buf++ = byte;
556 bufferspace--;
557 }
558 }
559 *ep->reg_udccs = UDCCS_BO_RPC;
560 /* RPC/RSP/RNE could now reflect the other packet buffer */
561
562 /* iso is one request per packet */
563 if (ep->bmAttributes == USB_ENDPOINT_XFER_ISOC) {
564 if (udccs & UDCCS_IO_ROF)
565 req->req.status = -EHOSTUNREACH;
566 /* more like "is_done" */
567 is_short = 1;
568 }
569
570 /* completion */
571 if (is_short || req->req.actual == req->req.length) {
572 done (ep, req, 0);
573 if (list_empty(&ep->queue))
574 pio_irq_disable (ep->bEndpointAddress);
575 return 1;
576 }
577
578 /* finished that packet. the next one may be waiting... */
579 }
580 return 0;
581 }
582
583 /*
584 * special ep0 version of the above. no UBCR0 or double buffering; status
585 * handshaking is magic. most device protocols don't need control-OUT.
586 * CDC vendor commands (and RNDIS), mass storage CB/CBI, and some other
587 * protocols do use them.
588 */
589 static int
590 read_ep0_fifo (struct pxa25x_ep *ep, struct pxa25x_request *req)
591 {
592 u8 *buf, byte;
593 unsigned bufferspace;
594
595 buf = req->req.buf + req->req.actual;
596 bufferspace = req->req.length - req->req.actual;
597
598 while (UDCCS0 & UDCCS0_RNE) {
599 byte = (u8) UDDR0;
600
601 if (unlikely (bufferspace == 0)) {
602 /* this happens when the driver's buffer
603 * is smaller than what the host sent.
604 * discard the extra data.
605 */
606 if (req->req.status != -EOVERFLOW)
607 DMSG("%s overflow\n", ep->ep.name);
608 req->req.status = -EOVERFLOW;
609 } else {
610 *buf++ = byte;
611 req->req.actual++;
612 bufferspace--;
613 }
614 }
615
616 UDCCS0 = UDCCS0_OPR | UDCCS0_IPR;
617
618 /* completion */
619 if (req->req.actual >= req->req.length)
620 return 1;
621
622 /* finished that packet. the next one may be waiting... */
623 return 0;
624 }
625
626 /*-------------------------------------------------------------------------*/
627
628 static int
629 pxa25x_ep_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags)
630 {
631 struct pxa25x_request *req;
632 struct pxa25x_ep *ep;
633 struct pxa25x_udc *dev;
634 unsigned long flags;
635
636 req = container_of(_req, struct pxa25x_request, req);
637 if (unlikely (!_req || !_req->complete || !_req->buf
638 || !list_empty(&req->queue))) {
639 DMSG("%s, bad params\n", __func__);
640 return -EINVAL;
641 }
642
643 ep = container_of(_ep, struct pxa25x_ep, ep);
644 if (unlikely(!_ep || (!ep->ep.desc && ep->ep.name != ep0name))) {
645 DMSG("%s, bad ep\n", __func__);
646 return -EINVAL;
647 }
648
649 dev = ep->dev;
650 if (unlikely (!dev->driver
651 || dev->gadget.speed == USB_SPEED_UNKNOWN)) {
652 DMSG("%s, bogus device state\n", __func__);
653 return -ESHUTDOWN;
654 }
655
656 /* iso is always one packet per request, that's the only way
657 * we can report per-packet status. that also helps with dma.
658 */
659 if (unlikely (ep->bmAttributes == USB_ENDPOINT_XFER_ISOC
660 && req->req.length > usb_endpoint_maxp(ep->ep.desc)))
661 return -EMSGSIZE;
662
663 DBG(DBG_NOISY, "%s queue req %p, len %d buf %p\n",
664 _ep->name, _req, _req->length, _req->buf);
665
666 local_irq_save(flags);
667
668 _req->status = -EINPROGRESS;
669 _req->actual = 0;
670
671 /* kickstart this i/o queue? */
672 if (list_empty(&ep->queue) && !ep->stopped) {
673 if (ep->ep.desc == NULL/* ep0 */) {
674 unsigned length = _req->length;
675
676 switch (dev->ep0state) {
677 case EP0_IN_DATA_PHASE:
678 dev->stats.write.ops++;
679 if (write_ep0_fifo(ep, req))
680 req = NULL;
681 break;
682
683 case EP0_OUT_DATA_PHASE:
684 dev->stats.read.ops++;
685 /* messy ... */
686 if (dev->req_config) {
687 DBG(DBG_VERBOSE, "ep0 config ack%s\n",
688 dev->has_cfr ? "" : " raced");
689 if (dev->has_cfr)
690 UDCCFR = UDCCFR_AREN|UDCCFR_ACM
691 |UDCCFR_MB1;
692 done(ep, req, 0);
693 dev->ep0state = EP0_END_XFER;
694 local_irq_restore (flags);
695 return 0;
696 }
697 if (dev->req_pending)
698 ep0start(dev, UDCCS0_IPR, "OUT");
699 if (length == 0 || ((UDCCS0 & UDCCS0_RNE) != 0
700 && read_ep0_fifo(ep, req))) {
701 ep0_idle(dev);
702 done(ep, req, 0);
703 req = NULL;
704 }
705 break;
706
707 default:
708 DMSG("ep0 i/o, odd state %d\n", dev->ep0state);
709 local_irq_restore (flags);
710 return -EL2HLT;
711 }
712 /* can the FIFO can satisfy the request immediately? */
713 } else if ((ep->bEndpointAddress & USB_DIR_IN) != 0) {
714 if ((*ep->reg_udccs & UDCCS_BI_TFS) != 0
715 && write_fifo(ep, req))
716 req = NULL;
717 } else if ((*ep->reg_udccs & UDCCS_BO_RFS) != 0
718 && read_fifo(ep, req)) {
719 req = NULL;
720 }
721
722 if (likely(req && ep->ep.desc))
723 pio_irq_enable(ep->bEndpointAddress);
724 }
725
726 /* pio or dma irq handler advances the queue. */
727 if (likely(req != NULL))
728 list_add_tail(&req->queue, &ep->queue);
729 local_irq_restore(flags);
730
731 return 0;
732 }
733
734
735 /*
736 * nuke - dequeue ALL requests
737 */
738 static void nuke(struct pxa25x_ep *ep, int status)
739 {
740 struct pxa25x_request *req;
741
742 /* called with irqs blocked */
743 while (!list_empty(&ep->queue)) {
744 req = list_entry(ep->queue.next,
745 struct pxa25x_request,
746 queue);
747 done(ep, req, status);
748 }
749 if (ep->ep.desc)
750 pio_irq_disable (ep->bEndpointAddress);
751 }
752
753
754 /* dequeue JUST ONE request */
755 static int pxa25x_ep_dequeue(struct usb_ep *_ep, struct usb_request *_req)
756 {
757 struct pxa25x_ep *ep;
758 struct pxa25x_request *req;
759 unsigned long flags;
760
761 ep = container_of(_ep, struct pxa25x_ep, ep);
762 if (!_ep || ep->ep.name == ep0name)
763 return -EINVAL;
764
765 local_irq_save(flags);
766
767 /* make sure it's actually queued on this endpoint */
768 list_for_each_entry (req, &ep->queue, queue) {
769 if (&req->req == _req)
770 break;
771 }
772 if (&req->req != _req) {
773 local_irq_restore(flags);
774 return -EINVAL;
775 }
776
777 done(ep, req, -ECONNRESET);
778
779 local_irq_restore(flags);
780 return 0;
781 }
782
783 /*-------------------------------------------------------------------------*/
784
785 static int pxa25x_ep_set_halt(struct usb_ep *_ep, int value)
786 {
787 struct pxa25x_ep *ep;
788 unsigned long flags;
789
790 ep = container_of(_ep, struct pxa25x_ep, ep);
791 if (unlikely (!_ep
792 || (!ep->ep.desc && ep->ep.name != ep0name))
793 || ep->bmAttributes == USB_ENDPOINT_XFER_ISOC) {
794 DMSG("%s, bad ep\n", __func__);
795 return -EINVAL;
796 }
797 if (value == 0) {
798 /* this path (reset toggle+halt) is needed to implement
799 * SET_INTERFACE on normal hardware. but it can't be
800 * done from software on the PXA UDC, and the hardware
801 * forgets to do it as part of SET_INTERFACE automagic.
802 */
803 DMSG("only host can clear %s halt\n", _ep->name);
804 return -EROFS;
805 }
806
807 local_irq_save(flags);
808
809 if ((ep->bEndpointAddress & USB_DIR_IN) != 0
810 && ((*ep->reg_udccs & UDCCS_BI_TFS) == 0
811 || !list_empty(&ep->queue))) {
812 local_irq_restore(flags);
813 return -EAGAIN;
814 }
815
816 /* FST bit is the same for control, bulk in, bulk out, interrupt in */
817 *ep->reg_udccs = UDCCS_BI_FST|UDCCS_BI_FTF;
818
819 /* ep0 needs special care */
820 if (!ep->ep.desc) {
821 start_watchdog(ep->dev);
822 ep->dev->req_pending = 0;
823 ep->dev->ep0state = EP0_STALL;
824
825 /* and bulk/intr endpoints like dropping stalls too */
826 } else {
827 unsigned i;
828 for (i = 0; i < 1000; i += 20) {
829 if (*ep->reg_udccs & UDCCS_BI_SST)
830 break;
831 udelay(20);
832 }
833 }
834 local_irq_restore(flags);
835
836 DBG(DBG_VERBOSE, "%s halt\n", _ep->name);
837 return 0;
838 }
839
840 static int pxa25x_ep_fifo_status(struct usb_ep *_ep)
841 {
842 struct pxa25x_ep *ep;
843
844 ep = container_of(_ep, struct pxa25x_ep, ep);
845 if (!_ep) {
846 DMSG("%s, bad ep\n", __func__);
847 return -ENODEV;
848 }
849 /* pxa can't report unclaimed bytes from IN fifos */
850 if ((ep->bEndpointAddress & USB_DIR_IN) != 0)
851 return -EOPNOTSUPP;
852 if (ep->dev->gadget.speed == USB_SPEED_UNKNOWN
853 || (*ep->reg_udccs & UDCCS_BO_RFS) == 0)
854 return 0;
855 else
856 return (*ep->reg_ubcr & 0xfff) + 1;
857 }
858
859 static void pxa25x_ep_fifo_flush(struct usb_ep *_ep)
860 {
861 struct pxa25x_ep *ep;
862
863 ep = container_of(_ep, struct pxa25x_ep, ep);
864 if (!_ep || ep->ep.name == ep0name || !list_empty(&ep->queue)) {
865 DMSG("%s, bad ep\n", __func__);
866 return;
867 }
868
869 /* toggle and halt bits stay unchanged */
870
871 /* for OUT, just read and discard the FIFO contents. */
872 if ((ep->bEndpointAddress & USB_DIR_IN) == 0) {
873 while (((*ep->reg_udccs) & UDCCS_BO_RNE) != 0)
874 (void) *ep->reg_uddr;
875 return;
876 }
877
878 /* most IN status is the same, but ISO can't stall */
879 *ep->reg_udccs = UDCCS_BI_TPC|UDCCS_BI_FTF|UDCCS_BI_TUR
880 | (ep->bmAttributes == USB_ENDPOINT_XFER_ISOC
881 ? 0 : UDCCS_BI_SST);
882 }
883
884
885 static struct usb_ep_ops pxa25x_ep_ops = {
886 .enable = pxa25x_ep_enable,
887 .disable = pxa25x_ep_disable,
888
889 .alloc_request = pxa25x_ep_alloc_request,
890 .free_request = pxa25x_ep_free_request,
891
892 .queue = pxa25x_ep_queue,
893 .dequeue = pxa25x_ep_dequeue,
894
895 .set_halt = pxa25x_ep_set_halt,
896 .fifo_status = pxa25x_ep_fifo_status,
897 .fifo_flush = pxa25x_ep_fifo_flush,
898 };
899
900
901 /* ---------------------------------------------------------------------------
902 * device-scoped parts of the api to the usb controller hardware
903 * ---------------------------------------------------------------------------
904 */
905
906 static int pxa25x_udc_get_frame(struct usb_gadget *_gadget)
907 {
908 return ((UFNRH & 0x07) << 8) | (UFNRL & 0xff);
909 }
910
911 static int pxa25x_udc_wakeup(struct usb_gadget *_gadget)
912 {
913 /* host may not have enabled remote wakeup */
914 if ((UDCCS0 & UDCCS0_DRWF) == 0)
915 return -EHOSTUNREACH;
916 udc_set_mask_UDCCR(UDCCR_RSM);
917 return 0;
918 }
919
920 static void stop_activity(struct pxa25x_udc *, struct usb_gadget_driver *);
921 static void udc_enable (struct pxa25x_udc *);
922 static void udc_disable(struct pxa25x_udc *);
923
924 /* We disable the UDC -- and its 48 MHz clock -- whenever it's not
925 * in active use.
926 */
927 static int pullup(struct pxa25x_udc *udc)
928 {
929 int is_active = udc->vbus && udc->pullup && !udc->suspended;
930 DMSG("%s\n", is_active ? "active" : "inactive");
931 if (is_active) {
932 if (!udc->active) {
933 udc->active = 1;
934 /* Enable clock for USB device */
935 clk_enable(udc->clk);
936 udc_enable(udc);
937 }
938 } else {
939 if (udc->active) {
940 if (udc->gadget.speed != USB_SPEED_UNKNOWN) {
941 DMSG("disconnect %s\n", udc->driver
942 ? udc->driver->driver.name
943 : "(no driver)");
944 stop_activity(udc, udc->driver);
945 }
946 udc_disable(udc);
947 /* Disable clock for USB device */
948 clk_disable(udc->clk);
949 udc->active = 0;
950 }
951
952 }
953 return 0;
954 }
955
956 /* VBUS reporting logically comes from a transceiver */
957 static int pxa25x_udc_vbus_session(struct usb_gadget *_gadget, int is_active)
958 {
959 struct pxa25x_udc *udc;
960
961 udc = container_of(_gadget, struct pxa25x_udc, gadget);
962 udc->vbus = is_active;
963 DMSG("vbus %s\n", is_active ? "supplied" : "inactive");
964 pullup(udc);
965 return 0;
966 }
967
968 /* drivers may have software control over D+ pullup */
969 static int pxa25x_udc_pullup(struct usb_gadget *_gadget, int is_active)
970 {
971 struct pxa25x_udc *udc;
972
973 udc = container_of(_gadget, struct pxa25x_udc, gadget);
974
975 /* not all boards support pullup control */
976 if (!gpio_is_valid(udc->mach->gpio_pullup) && !udc->mach->udc_command)
977 return -EOPNOTSUPP;
978
979 udc->pullup = (is_active != 0);
980 pullup(udc);
981 return 0;
982 }
983
984 /* boards may consume current from VBUS, up to 100-500mA based on config.
985 * the 500uA suspend ceiling means that exclusively vbus-powered PXA designs
986 * violate USB specs.
987 */
988 static int pxa25x_udc_vbus_draw(struct usb_gadget *_gadget, unsigned mA)
989 {
990 struct pxa25x_udc *udc;
991
992 udc = container_of(_gadget, struct pxa25x_udc, gadget);
993
994 if (!IS_ERR_OR_NULL(udc->transceiver))
995 return usb_phy_set_power(udc->transceiver, mA);
996 return -EOPNOTSUPP;
997 }
998
999 static int pxa25x_udc_start(struct usb_gadget *g,
1000 struct usb_gadget_driver *driver);
1001 static int pxa25x_udc_stop(struct usb_gadget *g,
1002 struct usb_gadget_driver *driver);
1003
1004 static const struct usb_gadget_ops pxa25x_udc_ops = {
1005 .get_frame = pxa25x_udc_get_frame,
1006 .wakeup = pxa25x_udc_wakeup,
1007 .vbus_session = pxa25x_udc_vbus_session,
1008 .pullup = pxa25x_udc_pullup,
1009 .vbus_draw = pxa25x_udc_vbus_draw,
1010 .udc_start = pxa25x_udc_start,
1011 .udc_stop = pxa25x_udc_stop,
1012 };
1013
1014 /*-------------------------------------------------------------------------*/
1015
1016 #ifdef CONFIG_USB_GADGET_DEBUG_FS
1017
1018 static int
1019 udc_seq_show(struct seq_file *m, void *_d)
1020 {
1021 struct pxa25x_udc *dev = m->private;
1022 unsigned long flags;
1023 int i;
1024 u32 tmp;
1025
1026 local_irq_save(flags);
1027
1028 /* basic device status */
1029 seq_printf(m, DRIVER_DESC "\n"
1030 "%s version: %s\nGadget driver: %s\nHost %s\n\n",
1031 driver_name, DRIVER_VERSION SIZE_STR "(pio)",
1032 dev->driver ? dev->driver->driver.name : "(none)",
1033 dev->gadget.speed == USB_SPEED_FULL ? "full speed" : "disconnected");
1034
1035 /* registers for device and ep0 */
1036 seq_printf(m,
1037 "uicr %02X.%02X, usir %02X.%02x, ufnr %02X.%02X\n",
1038 UICR1, UICR0, USIR1, USIR0, UFNRH, UFNRL);
1039
1040 tmp = UDCCR;
1041 seq_printf(m,
1042 "udccr %02X =%s%s%s%s%s%s%s%s\n", tmp,
1043 (tmp & UDCCR_REM) ? " rem" : "",
1044 (tmp & UDCCR_RSTIR) ? " rstir" : "",
1045 (tmp & UDCCR_SRM) ? " srm" : "",
1046 (tmp & UDCCR_SUSIR) ? " susir" : "",
1047 (tmp & UDCCR_RESIR) ? " resir" : "",
1048 (tmp & UDCCR_RSM) ? " rsm" : "",
1049 (tmp & UDCCR_UDA) ? " uda" : "",
1050 (tmp & UDCCR_UDE) ? " ude" : "");
1051
1052 tmp = UDCCS0;
1053 seq_printf(m,
1054 "udccs0 %02X =%s%s%s%s%s%s%s%s\n", tmp,
1055 (tmp & UDCCS0_SA) ? " sa" : "",
1056 (tmp & UDCCS0_RNE) ? " rne" : "",
1057 (tmp & UDCCS0_FST) ? " fst" : "",
1058 (tmp & UDCCS0_SST) ? " sst" : "",
1059 (tmp & UDCCS0_DRWF) ? " dwrf" : "",
1060 (tmp & UDCCS0_FTF) ? " ftf" : "",
1061 (tmp & UDCCS0_IPR) ? " ipr" : "",
1062 (tmp & UDCCS0_OPR) ? " opr" : "");
1063
1064 if (dev->has_cfr) {
1065 tmp = UDCCFR;
1066 seq_printf(m,
1067 "udccfr %02X =%s%s\n", tmp,
1068 (tmp & UDCCFR_AREN) ? " aren" : "",
1069 (tmp & UDCCFR_ACM) ? " acm" : "");
1070 }
1071
1072 if (dev->gadget.speed != USB_SPEED_FULL || !dev->driver)
1073 goto done;
1074
1075 seq_printf(m, "ep0 IN %lu/%lu, OUT %lu/%lu\nirqs %lu\n\n",
1076 dev->stats.write.bytes, dev->stats.write.ops,
1077 dev->stats.read.bytes, dev->stats.read.ops,
1078 dev->stats.irqs);
1079
1080 /* dump endpoint queues */
1081 for (i = 0; i < PXA_UDC_NUM_ENDPOINTS; i++) {
1082 struct pxa25x_ep *ep = &dev->ep [i];
1083 struct pxa25x_request *req;
1084
1085 if (i != 0) {
1086 const struct usb_endpoint_descriptor *desc;
1087
1088 desc = ep->ep.desc;
1089 if (!desc)
1090 continue;
1091 tmp = *dev->ep [i].reg_udccs;
1092 seq_printf(m,
1093 "%s max %d %s udccs %02x irqs %lu\n",
1094 ep->ep.name, usb_endpoint_maxp(desc),
1095 "pio", tmp, ep->pio_irqs);
1096 /* TODO translate all five groups of udccs bits! */
1097
1098 } else /* ep0 should only have one transfer queued */
1099 seq_printf(m, "ep0 max 16 pio irqs %lu\n",
1100 ep->pio_irqs);
1101
1102 if (list_empty(&ep->queue)) {
1103 seq_printf(m, "\t(nothing queued)\n");
1104 continue;
1105 }
1106 list_for_each_entry(req, &ep->queue, queue) {
1107 seq_printf(m,
1108 "\treq %p len %d/%d buf %p\n",
1109 &req->req, req->req.actual,
1110 req->req.length, req->req.buf);
1111 }
1112 }
1113
1114 done:
1115 local_irq_restore(flags);
1116 return 0;
1117 }
1118
1119 static int
1120 udc_debugfs_open(struct inode *inode, struct file *file)
1121 {
1122 return single_open(file, udc_seq_show, inode->i_private);
1123 }
1124
1125 static const struct file_operations debug_fops = {
1126 .open = udc_debugfs_open,
1127 .read = seq_read,
1128 .llseek = seq_lseek,
1129 .release = single_release,
1130 .owner = THIS_MODULE,
1131 };
1132
1133 #define create_debug_files(dev) \
1134 do { \
1135 dev->debugfs_udc = debugfs_create_file(dev->gadget.name, \
1136 S_IRUGO, NULL, dev, &debug_fops); \
1137 } while (0)
1138 #define remove_debug_files(dev) \
1139 do { \
1140 if (dev->debugfs_udc) \
1141 debugfs_remove(dev->debugfs_udc); \
1142 } while (0)
1143
1144 #else /* !CONFIG_USB_GADGET_DEBUG_FILES */
1145
1146 #define create_debug_files(dev) do {} while (0)
1147 #define remove_debug_files(dev) do {} while (0)
1148
1149 #endif /* CONFIG_USB_GADGET_DEBUG_FILES */
1150
1151 /*-------------------------------------------------------------------------*/
1152
1153 /*
1154 * udc_disable - disable USB device controller
1155 */
1156 static void udc_disable(struct pxa25x_udc *dev)
1157 {
1158 /* block all irqs */
1159 udc_set_mask_UDCCR(UDCCR_SRM|UDCCR_REM);
1160 UICR0 = UICR1 = 0xff;
1161 UFNRH = UFNRH_SIM;
1162
1163 /* if hardware supports it, disconnect from usb */
1164 pullup_off();
1165
1166 udc_clear_mask_UDCCR(UDCCR_UDE);
1167
1168 ep0_idle (dev);
1169 dev->gadget.speed = USB_SPEED_UNKNOWN;
1170 }
1171
1172
1173 /*
1174 * udc_reinit - initialize software state
1175 */
1176 static void udc_reinit(struct pxa25x_udc *dev)
1177 {
1178 u32 i;
1179
1180 /* device/ep0 records init */
1181 INIT_LIST_HEAD (&dev->gadget.ep_list);
1182 INIT_LIST_HEAD (&dev->gadget.ep0->ep_list);
1183 dev->ep0state = EP0_IDLE;
1184
1185 /* basic endpoint records init */
1186 for (i = 0; i < PXA_UDC_NUM_ENDPOINTS; i++) {
1187 struct pxa25x_ep *ep = &dev->ep[i];
1188
1189 if (i != 0)
1190 list_add_tail (&ep->ep.ep_list, &dev->gadget.ep_list);
1191
1192 ep->ep.desc = NULL;
1193 ep->stopped = 0;
1194 INIT_LIST_HEAD (&ep->queue);
1195 ep->pio_irqs = 0;
1196 usb_ep_set_maxpacket_limit(&ep->ep, ep->ep.maxpacket);
1197 }
1198
1199 /* the rest was statically initialized, and is read-only */
1200 }
1201
1202 /* until it's enabled, this UDC should be completely invisible
1203 * to any USB host.
1204 */
1205 static void udc_enable (struct pxa25x_udc *dev)
1206 {
1207 udc_clear_mask_UDCCR(UDCCR_UDE);
1208
1209 /* try to clear these bits before we enable the udc */
1210 udc_ack_int_UDCCR(UDCCR_SUSIR|/*UDCCR_RSTIR|*/UDCCR_RESIR);
1211
1212 ep0_idle(dev);
1213 dev->gadget.speed = USB_SPEED_UNKNOWN;
1214 dev->stats.irqs = 0;
1215
1216 /*
1217 * sequence taken from chapter 12.5.10, PXA250 AppProcDevManual:
1218 * - enable UDC
1219 * - if RESET is already in progress, ack interrupt
1220 * - unmask reset interrupt
1221 */
1222 udc_set_mask_UDCCR(UDCCR_UDE);
1223 if (!(UDCCR & UDCCR_UDA))
1224 udc_ack_int_UDCCR(UDCCR_RSTIR);
1225
1226 if (dev->has_cfr /* UDC_RES2 is defined */) {
1227 /* pxa255 (a0+) can avoid a set_config race that could
1228 * prevent gadget drivers from configuring correctly
1229 */
1230 UDCCFR = UDCCFR_ACM | UDCCFR_MB1;
1231 } else {
1232 /* "USB test mode" for pxa250 errata 40-42 (stepping a0, a1)
1233 * which could result in missing packets and interrupts.
1234 * supposedly one bit per endpoint, controlling whether it
1235 * double buffers or not; ACM/AREN bits fit into the holes.
1236 * zero bits (like USIR0_IRx) disable double buffering.
1237 */
1238 UDC_RES1 = 0x00;
1239 UDC_RES2 = 0x00;
1240 }
1241
1242 /* enable suspend/resume and reset irqs */
1243 udc_clear_mask_UDCCR(UDCCR_SRM | UDCCR_REM);
1244
1245 /* enable ep0 irqs */
1246 UICR0 &= ~UICR0_IM0;
1247
1248 /* if hardware supports it, pullup D+ and wait for reset */
1249 pullup_on();
1250 }
1251
1252
1253 /* when a driver is successfully registered, it will receive
1254 * control requests including set_configuration(), which enables
1255 * non-control requests. then usb traffic follows until a
1256 * disconnect is reported. then a host may connect again, or
1257 * the driver might get unbound.
1258 */
1259 static int pxa25x_udc_start(struct usb_gadget *g,
1260 struct usb_gadget_driver *driver)
1261 {
1262 struct pxa25x_udc *dev = to_pxa25x(g);
1263 int retval;
1264
1265 /* first hook up the driver ... */
1266 dev->driver = driver;
1267 dev->pullup = 1;
1268
1269 /* ... then enable host detection and ep0; and we're ready
1270 * for set_configuration as well as eventual disconnect.
1271 */
1272 /* connect to bus through transceiver */
1273 if (!IS_ERR_OR_NULL(dev->transceiver)) {
1274 retval = otg_set_peripheral(dev->transceiver->otg,
1275 &dev->gadget);
1276 if (retval)
1277 goto bind_fail;
1278 }
1279
1280 pullup(dev);
1281 dump_state(dev);
1282 return 0;
1283 bind_fail:
1284 return retval;
1285 }
1286
1287 static void
1288 stop_activity(struct pxa25x_udc *dev, struct usb_gadget_driver *driver)
1289 {
1290 int i;
1291
1292 /* don't disconnect drivers more than once */
1293 if (dev->gadget.speed == USB_SPEED_UNKNOWN)
1294 driver = NULL;
1295 dev->gadget.speed = USB_SPEED_UNKNOWN;
1296
1297 /* prevent new request submissions, kill any outstanding requests */
1298 for (i = 0; i < PXA_UDC_NUM_ENDPOINTS; i++) {
1299 struct pxa25x_ep *ep = &dev->ep[i];
1300
1301 ep->stopped = 1;
1302 nuke(ep, -ESHUTDOWN);
1303 }
1304 del_timer_sync(&dev->timer);
1305
1306 /* report disconnect; the driver is already quiesced */
1307 if (driver)
1308 driver->disconnect(&dev->gadget);
1309
1310 /* re-init driver-visible data structures */
1311 udc_reinit(dev);
1312 }
1313
1314 static int pxa25x_udc_stop(struct usb_gadget*g,
1315 struct usb_gadget_driver *driver)
1316 {
1317 struct pxa25x_udc *dev = to_pxa25x(g);
1318
1319 local_irq_disable();
1320 dev->pullup = 0;
1321 pullup(dev);
1322 stop_activity(dev, driver);
1323 local_irq_enable();
1324
1325 if (!IS_ERR_OR_NULL(dev->transceiver))
1326 (void) otg_set_peripheral(dev->transceiver->otg, NULL);
1327
1328 dev->driver = NULL;
1329
1330 dump_state(dev);
1331
1332 return 0;
1333 }
1334
1335 /*-------------------------------------------------------------------------*/
1336
1337 #ifdef CONFIG_ARCH_LUBBOCK
1338
1339 /* Lubbock has separate connect and disconnect irqs. More typical designs
1340 * use one GPIO as the VBUS IRQ, and another to control the D+ pullup.
1341 */
1342
1343 static irqreturn_t
1344 lubbock_vbus_irq(int irq, void *_dev)
1345 {
1346 struct pxa25x_udc *dev = _dev;
1347 int vbus;
1348
1349 dev->stats.irqs++;
1350 switch (irq) {
1351 case LUBBOCK_USB_IRQ:
1352 vbus = 1;
1353 disable_irq(LUBBOCK_USB_IRQ);
1354 enable_irq(LUBBOCK_USB_DISC_IRQ);
1355 break;
1356 case LUBBOCK_USB_DISC_IRQ:
1357 vbus = 0;
1358 disable_irq(LUBBOCK_USB_DISC_IRQ);
1359 enable_irq(LUBBOCK_USB_IRQ);
1360 break;
1361 default:
1362 return IRQ_NONE;
1363 }
1364
1365 pxa25x_udc_vbus_session(&dev->gadget, vbus);
1366 return IRQ_HANDLED;
1367 }
1368
1369 #endif
1370
1371
1372 /*-------------------------------------------------------------------------*/
1373
1374 static inline void clear_ep_state (struct pxa25x_udc *dev)
1375 {
1376 unsigned i;
1377
1378 /* hardware SET_{CONFIGURATION,INTERFACE} automagic resets endpoint
1379 * fifos, and pending transactions mustn't be continued in any case.
1380 */
1381 for (i = 1; i < PXA_UDC_NUM_ENDPOINTS; i++)
1382 nuke(&dev->ep[i], -ECONNABORTED);
1383 }
1384
1385 static void udc_watchdog(unsigned long _dev)
1386 {
1387 struct pxa25x_udc *dev = (void *)_dev;
1388
1389 local_irq_disable();
1390 if (dev->ep0state == EP0_STALL
1391 && (UDCCS0 & UDCCS0_FST) == 0
1392 && (UDCCS0 & UDCCS0_SST) == 0) {
1393 UDCCS0 = UDCCS0_FST|UDCCS0_FTF;
1394 DBG(DBG_VERBOSE, "ep0 re-stall\n");
1395 start_watchdog(dev);
1396 }
1397 local_irq_enable();
1398 }
1399
1400 static void handle_ep0 (struct pxa25x_udc *dev)
1401 {
1402 u32 udccs0 = UDCCS0;
1403 struct pxa25x_ep *ep = &dev->ep [0];
1404 struct pxa25x_request *req;
1405 union {
1406 struct usb_ctrlrequest r;
1407 u8 raw [8];
1408 u32 word [2];
1409 } u;
1410
1411 if (list_empty(&ep->queue))
1412 req = NULL;
1413 else
1414 req = list_entry(ep->queue.next, struct pxa25x_request, queue);
1415
1416 /* clear stall status */
1417 if (udccs0 & UDCCS0_SST) {
1418 nuke(ep, -EPIPE);
1419 UDCCS0 = UDCCS0_SST;
1420 del_timer(&dev->timer);
1421 ep0_idle(dev);
1422 }
1423
1424 /* previous request unfinished? non-error iff back-to-back ... */
1425 if ((udccs0 & UDCCS0_SA) != 0 && dev->ep0state != EP0_IDLE) {
1426 nuke(ep, 0);
1427 del_timer(&dev->timer);
1428 ep0_idle(dev);
1429 }
1430
1431 switch (dev->ep0state) {
1432 case EP0_IDLE:
1433 /* late-breaking status? */
1434 udccs0 = UDCCS0;
1435
1436 /* start control request? */
1437 if (likely((udccs0 & (UDCCS0_OPR|UDCCS0_SA|UDCCS0_RNE))
1438 == (UDCCS0_OPR|UDCCS0_SA|UDCCS0_RNE))) {
1439 int i;
1440
1441 nuke (ep, -EPROTO);
1442
1443 /* read SETUP packet */
1444 for (i = 0; i < 8; i++) {
1445 if (unlikely(!(UDCCS0 & UDCCS0_RNE))) {
1446 bad_setup:
1447 DMSG("SETUP %d!\n", i);
1448 goto stall;
1449 }
1450 u.raw [i] = (u8) UDDR0;
1451 }
1452 if (unlikely((UDCCS0 & UDCCS0_RNE) != 0))
1453 goto bad_setup;
1454
1455 got_setup:
1456 DBG(DBG_VERBOSE, "SETUP %02x.%02x v%04x i%04x l%04x\n",
1457 u.r.bRequestType, u.r.bRequest,
1458 le16_to_cpu(u.r.wValue),
1459 le16_to_cpu(u.r.wIndex),
1460 le16_to_cpu(u.r.wLength));
1461
1462 /* cope with automagic for some standard requests. */
1463 dev->req_std = (u.r.bRequestType & USB_TYPE_MASK)
1464 == USB_TYPE_STANDARD;
1465 dev->req_config = 0;
1466 dev->req_pending = 1;
1467 switch (u.r.bRequest) {
1468 /* hardware restricts gadget drivers here! */
1469 case USB_REQ_SET_CONFIGURATION:
1470 if (u.r.bRequestType == USB_RECIP_DEVICE) {
1471 /* reflect hardware's automagic
1472 * up to the gadget driver.
1473 */
1474 config_change:
1475 dev->req_config = 1;
1476 clear_ep_state(dev);
1477 /* if !has_cfr, there's no synch
1478 * else use AREN (later) not SA|OPR
1479 * USIR0_IR0 acts edge sensitive
1480 */
1481 }
1482 break;
1483 /* ... and here, even more ... */
1484 case USB_REQ_SET_INTERFACE:
1485 if (u.r.bRequestType == USB_RECIP_INTERFACE) {
1486 /* udc hardware is broken by design:
1487 * - altsetting may only be zero;
1488 * - hw resets all interfaces' eps;
1489 * - ep reset doesn't include halt(?).
1490 */
1491 DMSG("broken set_interface (%d/%d)\n",
1492 le16_to_cpu(u.r.wIndex),
1493 le16_to_cpu(u.r.wValue));
1494 goto config_change;
1495 }
1496 break;
1497 /* hardware was supposed to hide this */
1498 case USB_REQ_SET_ADDRESS:
1499 if (u.r.bRequestType == USB_RECIP_DEVICE) {
1500 ep0start(dev, 0, "address");
1501 return;
1502 }
1503 break;
1504 }
1505
1506 if (u.r.bRequestType & USB_DIR_IN)
1507 dev->ep0state = EP0_IN_DATA_PHASE;
1508 else
1509 dev->ep0state = EP0_OUT_DATA_PHASE;
1510
1511 i = dev->driver->setup(&dev->gadget, &u.r);
1512 if (i < 0) {
1513 /* hardware automagic preventing STALL... */
1514 if (dev->req_config) {
1515 /* hardware sometimes neglects to tell
1516 * tell us about config change events,
1517 * so later ones may fail...
1518 */
1519 WARNING("config change %02x fail %d?\n",
1520 u.r.bRequest, i);
1521 return;
1522 /* TODO experiment: if has_cfr,
1523 * hardware didn't ACK; maybe we
1524 * could actually STALL!
1525 */
1526 }
1527 DBG(DBG_VERBOSE, "protocol STALL, "
1528 "%02x err %d\n", UDCCS0, i);
1529 stall:
1530 /* the watchdog timer helps deal with cases
1531 * where udc seems to clear FST wrongly, and
1532 * then NAKs instead of STALLing.
1533 */
1534 ep0start(dev, UDCCS0_FST|UDCCS0_FTF, "stall");
1535 start_watchdog(dev);
1536 dev->ep0state = EP0_STALL;
1537
1538 /* deferred i/o == no response yet */
1539 } else if (dev->req_pending) {
1540 if (likely(dev->ep0state == EP0_IN_DATA_PHASE
1541 || dev->req_std || u.r.wLength))
1542 ep0start(dev, 0, "defer");
1543 else
1544 ep0start(dev, UDCCS0_IPR, "defer/IPR");
1545 }
1546
1547 /* expect at least one data or status stage irq */
1548 return;
1549
1550 } else if (likely((udccs0 & (UDCCS0_OPR|UDCCS0_SA))
1551 == (UDCCS0_OPR|UDCCS0_SA))) {
1552 unsigned i;
1553
1554 /* pxa210/250 erratum 131 for B0/B1 says RNE lies.
1555 * still observed on a pxa255 a0.
1556 */
1557 DBG(DBG_VERBOSE, "e131\n");
1558 nuke(ep, -EPROTO);
1559
1560 /* read SETUP data, but don't trust it too much */
1561 for (i = 0; i < 8; i++)
1562 u.raw [i] = (u8) UDDR0;
1563 if ((u.r.bRequestType & USB_RECIP_MASK)
1564 > USB_RECIP_OTHER)
1565 goto stall;
1566 if (u.word [0] == 0 && u.word [1] == 0)
1567 goto stall;
1568 goto got_setup;
1569 } else {
1570 /* some random early IRQ:
1571 * - we acked FST
1572 * - IPR cleared
1573 * - OPR got set, without SA (likely status stage)
1574 */
1575 UDCCS0 = udccs0 & (UDCCS0_SA|UDCCS0_OPR);
1576 }
1577 break;
1578 case EP0_IN_DATA_PHASE: /* GET_DESCRIPTOR etc */
1579 if (udccs0 & UDCCS0_OPR) {
1580 UDCCS0 = UDCCS0_OPR|UDCCS0_FTF;
1581 DBG(DBG_VERBOSE, "ep0in premature status\n");
1582 if (req)
1583 done(ep, req, 0);
1584 ep0_idle(dev);
1585 } else /* irq was IPR clearing */ {
1586 if (req) {
1587 /* this IN packet might finish the request */
1588 (void) write_ep0_fifo(ep, req);
1589 } /* else IN token before response was written */
1590 }
1591 break;
1592 case EP0_OUT_DATA_PHASE: /* SET_DESCRIPTOR etc */
1593 if (udccs0 & UDCCS0_OPR) {
1594 if (req) {
1595 /* this OUT packet might finish the request */
1596 if (read_ep0_fifo(ep, req))
1597 done(ep, req, 0);
1598 /* else more OUT packets expected */
1599 } /* else OUT token before read was issued */
1600 } else /* irq was IPR clearing */ {
1601 DBG(DBG_VERBOSE, "ep0out premature status\n");
1602 if (req)
1603 done(ep, req, 0);
1604 ep0_idle(dev);
1605 }
1606 break;
1607 case EP0_END_XFER:
1608 if (req)
1609 done(ep, req, 0);
1610 /* ack control-IN status (maybe in-zlp was skipped)
1611 * also appears after some config change events.
1612 */
1613 if (udccs0 & UDCCS0_OPR)
1614 UDCCS0 = UDCCS0_OPR;
1615 ep0_idle(dev);
1616 break;
1617 case EP0_STALL:
1618 UDCCS0 = UDCCS0_FST;
1619 break;
1620 }
1621 USIR0 = USIR0_IR0;
1622 }
1623
1624 static void handle_ep(struct pxa25x_ep *ep)
1625 {
1626 struct pxa25x_request *req;
1627 int is_in = ep->bEndpointAddress & USB_DIR_IN;
1628 int completed;
1629 u32 udccs, tmp;
1630
1631 do {
1632 completed = 0;
1633 if (likely (!list_empty(&ep->queue)))
1634 req = list_entry(ep->queue.next,
1635 struct pxa25x_request, queue);
1636 else
1637 req = NULL;
1638
1639 // TODO check FST handling
1640
1641 udccs = *ep->reg_udccs;
1642 if (unlikely(is_in)) { /* irq from TPC, SST, or (ISO) TUR */
1643 tmp = UDCCS_BI_TUR;
1644 if (likely(ep->bmAttributes == USB_ENDPOINT_XFER_BULK))
1645 tmp |= UDCCS_BI_SST;
1646 tmp &= udccs;
1647 if (likely (tmp))
1648 *ep->reg_udccs = tmp;
1649 if (req && likely ((udccs & UDCCS_BI_TFS) != 0))
1650 completed = write_fifo(ep, req);
1651
1652 } else { /* irq from RPC (or for ISO, ROF) */
1653 if (likely(ep->bmAttributes == USB_ENDPOINT_XFER_BULK))
1654 tmp = UDCCS_BO_SST | UDCCS_BO_DME;
1655 else
1656 tmp = UDCCS_IO_ROF | UDCCS_IO_DME;
1657 tmp &= udccs;
1658 if (likely(tmp))
1659 *ep->reg_udccs = tmp;
1660
1661 /* fifos can hold packets, ready for reading... */
1662 if (likely(req)) {
1663 completed = read_fifo(ep, req);
1664 } else
1665 pio_irq_disable (ep->bEndpointAddress);
1666 }
1667 ep->pio_irqs++;
1668 } while (completed);
1669 }
1670
1671 /*
1672 * pxa25x_udc_irq - interrupt handler
1673 *
1674 * avoid delays in ep0 processing. the control handshaking isn't always
1675 * under software control (pxa250c0 and the pxa255 are better), and delays
1676 * could cause usb protocol errors.
1677 */
1678 static irqreturn_t
1679 pxa25x_udc_irq(int irq, void *_dev)
1680 {
1681 struct pxa25x_udc *dev = _dev;
1682 int handled;
1683
1684 dev->stats.irqs++;
1685 do {
1686 u32 udccr = UDCCR;
1687
1688 handled = 0;
1689
1690 /* SUSpend Interrupt Request */
1691 if (unlikely(udccr & UDCCR_SUSIR)) {
1692 udc_ack_int_UDCCR(UDCCR_SUSIR);
1693 handled = 1;
1694 DBG(DBG_VERBOSE, "USB suspend\n");
1695
1696 if (dev->gadget.speed != USB_SPEED_UNKNOWN
1697 && dev->driver
1698 && dev->driver->suspend)
1699 dev->driver->suspend(&dev->gadget);
1700 ep0_idle (dev);
1701 }
1702
1703 /* RESume Interrupt Request */
1704 if (unlikely(udccr & UDCCR_RESIR)) {
1705 udc_ack_int_UDCCR(UDCCR_RESIR);
1706 handled = 1;
1707 DBG(DBG_VERBOSE, "USB resume\n");
1708
1709 if (dev->gadget.speed != USB_SPEED_UNKNOWN
1710 && dev->driver
1711 && dev->driver->resume)
1712 dev->driver->resume(&dev->gadget);
1713 }
1714
1715 /* ReSeT Interrupt Request - USB reset */
1716 if (unlikely(udccr & UDCCR_RSTIR)) {
1717 udc_ack_int_UDCCR(UDCCR_RSTIR);
1718 handled = 1;
1719
1720 if ((UDCCR & UDCCR_UDA) == 0) {
1721 DBG(DBG_VERBOSE, "USB reset start\n");
1722
1723 /* reset driver and endpoints,
1724 * in case that's not yet done
1725 */
1726 stop_activity (dev, dev->driver);
1727
1728 } else {
1729 DBG(DBG_VERBOSE, "USB reset end\n");
1730 dev->gadget.speed = USB_SPEED_FULL;
1731 memset(&dev->stats, 0, sizeof dev->stats);
1732 /* driver and endpoints are still reset */
1733 }
1734
1735 } else {
1736 u32 usir0 = USIR0 & ~UICR0;
1737 u32 usir1 = USIR1 & ~UICR1;
1738 int i;
1739
1740 if (unlikely (!usir0 && !usir1))
1741 continue;
1742
1743 DBG(DBG_VERY_NOISY, "irq %02x.%02x\n", usir1, usir0);
1744
1745 /* control traffic */
1746 if (usir0 & USIR0_IR0) {
1747 dev->ep[0].pio_irqs++;
1748 handle_ep0(dev);
1749 handled = 1;
1750 }
1751
1752 /* endpoint data transfers */
1753 for (i = 0; i < 8; i++) {
1754 u32 tmp = 1 << i;
1755
1756 if (i && (usir0 & tmp)) {
1757 handle_ep(&dev->ep[i]);
1758 USIR0 |= tmp;
1759 handled = 1;
1760 }
1761 #ifndef CONFIG_USB_PXA25X_SMALL
1762 if (usir1 & tmp) {
1763 handle_ep(&dev->ep[i+8]);
1764 USIR1 |= tmp;
1765 handled = 1;
1766 }
1767 #endif
1768 }
1769 }
1770
1771 /* we could also ask for 1 msec SOF (SIR) interrupts */
1772
1773 } while (handled);
1774 return IRQ_HANDLED;
1775 }
1776
1777 /*-------------------------------------------------------------------------*/
1778
1779 static void nop_release (struct device *dev)
1780 {
1781 DMSG("%s %s\n", __func__, dev_name(dev));
1782 }
1783
1784 /* this uses load-time allocation and initialization (instead of
1785 * doing it at run-time) to save code, eliminate fault paths, and
1786 * be more obviously correct.
1787 */
1788 static struct pxa25x_udc memory = {
1789 .gadget = {
1790 .ops = &pxa25x_udc_ops,
1791 .ep0 = &memory.ep[0].ep,
1792 .name = driver_name,
1793 .dev = {
1794 .init_name = "gadget",
1795 .release = nop_release,
1796 },
1797 },
1798
1799 /* control endpoint */
1800 .ep[0] = {
1801 .ep = {
1802 .name = ep0name,
1803 .ops = &pxa25x_ep_ops,
1804 .maxpacket = EP0_FIFO_SIZE,
1805 },
1806 .dev = &memory,
1807 .reg_udccs = &UDCCS0,
1808 .reg_uddr = &UDDR0,
1809 },
1810
1811 /* first group of endpoints */
1812 .ep[1] = {
1813 .ep = {
1814 .name = "ep1in-bulk",
1815 .ops = &pxa25x_ep_ops,
1816 .maxpacket = BULK_FIFO_SIZE,
1817 },
1818 .dev = &memory,
1819 .fifo_size = BULK_FIFO_SIZE,
1820 .bEndpointAddress = USB_DIR_IN | 1,
1821 .bmAttributes = USB_ENDPOINT_XFER_BULK,
1822 .reg_udccs = &UDCCS1,
1823 .reg_uddr = &UDDR1,
1824 },
1825 .ep[2] = {
1826 .ep = {
1827 .name = "ep2out-bulk",
1828 .ops = &pxa25x_ep_ops,
1829 .maxpacket = BULK_FIFO_SIZE,
1830 },
1831 .dev = &memory,
1832 .fifo_size = BULK_FIFO_SIZE,
1833 .bEndpointAddress = 2,
1834 .bmAttributes = USB_ENDPOINT_XFER_BULK,
1835 .reg_udccs = &UDCCS2,
1836 .reg_ubcr = &UBCR2,
1837 .reg_uddr = &UDDR2,
1838 },
1839 #ifndef CONFIG_USB_PXA25X_SMALL
1840 .ep[3] = {
1841 .ep = {
1842 .name = "ep3in-iso",
1843 .ops = &pxa25x_ep_ops,
1844 .maxpacket = ISO_FIFO_SIZE,
1845 },
1846 .dev = &memory,
1847 .fifo_size = ISO_FIFO_SIZE,
1848 .bEndpointAddress = USB_DIR_IN | 3,
1849 .bmAttributes = USB_ENDPOINT_XFER_ISOC,
1850 .reg_udccs = &UDCCS3,
1851 .reg_uddr = &UDDR3,
1852 },
1853 .ep[4] = {
1854 .ep = {
1855 .name = "ep4out-iso",
1856 .ops = &pxa25x_ep_ops,
1857 .maxpacket = ISO_FIFO_SIZE,
1858 },
1859 .dev = &memory,
1860 .fifo_size = ISO_FIFO_SIZE,
1861 .bEndpointAddress = 4,
1862 .bmAttributes = USB_ENDPOINT_XFER_ISOC,
1863 .reg_udccs = &UDCCS4,
1864 .reg_ubcr = &UBCR4,
1865 .reg_uddr = &UDDR4,
1866 },
1867 .ep[5] = {
1868 .ep = {
1869 .name = "ep5in-int",
1870 .ops = &pxa25x_ep_ops,
1871 .maxpacket = INT_FIFO_SIZE,
1872 },
1873 .dev = &memory,
1874 .fifo_size = INT_FIFO_SIZE,
1875 .bEndpointAddress = USB_DIR_IN | 5,
1876 .bmAttributes = USB_ENDPOINT_XFER_INT,
1877 .reg_udccs = &UDCCS5,
1878 .reg_uddr = &UDDR5,
1879 },
1880
1881 /* second group of endpoints */
1882 .ep[6] = {
1883 .ep = {
1884 .name = "ep6in-bulk",
1885 .ops = &pxa25x_ep_ops,
1886 .maxpacket = BULK_FIFO_SIZE,
1887 },
1888 .dev = &memory,
1889 .fifo_size = BULK_FIFO_SIZE,
1890 .bEndpointAddress = USB_DIR_IN | 6,
1891 .bmAttributes = USB_ENDPOINT_XFER_BULK,
1892 .reg_udccs = &UDCCS6,
1893 .reg_uddr = &UDDR6,
1894 },
1895 .ep[7] = {
1896 .ep = {
1897 .name = "ep7out-bulk",
1898 .ops = &pxa25x_ep_ops,
1899 .maxpacket = BULK_FIFO_SIZE,
1900 },
1901 .dev = &memory,
1902 .fifo_size = BULK_FIFO_SIZE,
1903 .bEndpointAddress = 7,
1904 .bmAttributes = USB_ENDPOINT_XFER_BULK,
1905 .reg_udccs = &UDCCS7,
1906 .reg_ubcr = &UBCR7,
1907 .reg_uddr = &UDDR7,
1908 },
1909 .ep[8] = {
1910 .ep = {
1911 .name = "ep8in-iso",
1912 .ops = &pxa25x_ep_ops,
1913 .maxpacket = ISO_FIFO_SIZE,
1914 },
1915 .dev = &memory,
1916 .fifo_size = ISO_FIFO_SIZE,
1917 .bEndpointAddress = USB_DIR_IN | 8,
1918 .bmAttributes = USB_ENDPOINT_XFER_ISOC,
1919 .reg_udccs = &UDCCS8,
1920 .reg_uddr = &UDDR8,
1921 },
1922 .ep[9] = {
1923 .ep = {
1924 .name = "ep9out-iso",
1925 .ops = &pxa25x_ep_ops,
1926 .maxpacket = ISO_FIFO_SIZE,
1927 },
1928 .dev = &memory,
1929 .fifo_size = ISO_FIFO_SIZE,
1930 .bEndpointAddress = 9,
1931 .bmAttributes = USB_ENDPOINT_XFER_ISOC,
1932 .reg_udccs = &UDCCS9,
1933 .reg_ubcr = &UBCR9,
1934 .reg_uddr = &UDDR9,
1935 },
1936 .ep[10] = {
1937 .ep = {
1938 .name = "ep10in-int",
1939 .ops = &pxa25x_ep_ops,
1940 .maxpacket = INT_FIFO_SIZE,
1941 },
1942 .dev = &memory,
1943 .fifo_size = INT_FIFO_SIZE,
1944 .bEndpointAddress = USB_DIR_IN | 10,
1945 .bmAttributes = USB_ENDPOINT_XFER_INT,
1946 .reg_udccs = &UDCCS10,
1947 .reg_uddr = &UDDR10,
1948 },
1949
1950 /* third group of endpoints */
1951 .ep[11] = {
1952 .ep = {
1953 .name = "ep11in-bulk",
1954 .ops = &pxa25x_ep_ops,
1955 .maxpacket = BULK_FIFO_SIZE,
1956 },
1957 .dev = &memory,
1958 .fifo_size = BULK_FIFO_SIZE,
1959 .bEndpointAddress = USB_DIR_IN | 11,
1960 .bmAttributes = USB_ENDPOINT_XFER_BULK,
1961 .reg_udccs = &UDCCS11,
1962 .reg_uddr = &UDDR11,
1963 },
1964 .ep[12] = {
1965 .ep = {
1966 .name = "ep12out-bulk",
1967 .ops = &pxa25x_ep_ops,
1968 .maxpacket = BULK_FIFO_SIZE,
1969 },
1970 .dev = &memory,
1971 .fifo_size = BULK_FIFO_SIZE,
1972 .bEndpointAddress = 12,
1973 .bmAttributes = USB_ENDPOINT_XFER_BULK,
1974 .reg_udccs = &UDCCS12,
1975 .reg_ubcr = &UBCR12,
1976 .reg_uddr = &UDDR12,
1977 },
1978 .ep[13] = {
1979 .ep = {
1980 .name = "ep13in-iso",
1981 .ops = &pxa25x_ep_ops,
1982 .maxpacket = ISO_FIFO_SIZE,
1983 },
1984 .dev = &memory,
1985 .fifo_size = ISO_FIFO_SIZE,
1986 .bEndpointAddress = USB_DIR_IN | 13,
1987 .bmAttributes = USB_ENDPOINT_XFER_ISOC,
1988 .reg_udccs = &UDCCS13,
1989 .reg_uddr = &UDDR13,
1990 },
1991 .ep[14] = {
1992 .ep = {
1993 .name = "ep14out-iso",
1994 .ops = &pxa25x_ep_ops,
1995 .maxpacket = ISO_FIFO_SIZE,
1996 },
1997 .dev = &memory,
1998 .fifo_size = ISO_FIFO_SIZE,
1999 .bEndpointAddress = 14,
2000 .bmAttributes = USB_ENDPOINT_XFER_ISOC,
2001 .reg_udccs = &UDCCS14,
2002 .reg_ubcr = &UBCR14,
2003 .reg_uddr = &UDDR14,
2004 },
2005 .ep[15] = {
2006 .ep = {
2007 .name = "ep15in-int",
2008 .ops = &pxa25x_ep_ops,
2009 .maxpacket = INT_FIFO_SIZE,
2010 },
2011 .dev = &memory,
2012 .fifo_size = INT_FIFO_SIZE,
2013 .bEndpointAddress = USB_DIR_IN | 15,
2014 .bmAttributes = USB_ENDPOINT_XFER_INT,
2015 .reg_udccs = &UDCCS15,
2016 .reg_uddr = &UDDR15,
2017 },
2018 #endif /* !CONFIG_USB_PXA25X_SMALL */
2019 };
2020
2021 #define CP15R0_VENDOR_MASK 0xffffe000
2022
2023 #if defined(CONFIG_ARCH_PXA)
2024 #define CP15R0_XSCALE_VALUE 0x69052000 /* intel/arm/xscale */
2025
2026 #elif defined(CONFIG_ARCH_IXP4XX)
2027 #define CP15R0_XSCALE_VALUE 0x69054000 /* intel/arm/ixp4xx */
2028
2029 #endif
2030
2031 #define CP15R0_PROD_MASK 0x000003f0
2032 #define PXA25x 0x00000100 /* and PXA26x */
2033 #define PXA210 0x00000120
2034
2035 #define CP15R0_REV_MASK 0x0000000f
2036
2037 #define CP15R0_PRODREV_MASK (CP15R0_PROD_MASK | CP15R0_REV_MASK)
2038
2039 #define PXA255_A0 0x00000106 /* or PXA260_B1 */
2040 #define PXA250_C0 0x00000105 /* or PXA26x_B0 */
2041 #define PXA250_B2 0x00000104
2042 #define PXA250_B1 0x00000103 /* or PXA260_A0 */
2043 #define PXA250_B0 0x00000102
2044 #define PXA250_A1 0x00000101
2045 #define PXA250_A0 0x00000100
2046
2047 #define PXA210_C0 0x00000125
2048 #define PXA210_B2 0x00000124
2049 #define PXA210_B1 0x00000123
2050 #define PXA210_B0 0x00000122
2051 #define IXP425_A0 0x000001c1
2052 #define IXP425_B0 0x000001f1
2053 #define IXP465_AD 0x00000200
2054
2055 /*
2056 * probe - binds to the platform device
2057 */
2058 static int pxa25x_udc_probe(struct platform_device *pdev)
2059 {
2060 struct pxa25x_udc *dev = &memory;
2061 int retval, irq;
2062 u32 chiprev;
2063
2064 pr_info("%s: version %s\n", driver_name, DRIVER_VERSION);
2065
2066 /* insist on Intel/ARM/XScale */
2067 asm("mrc%? p15, 0, %0, c0, c0" : "=r" (chiprev));
2068 if ((chiprev & CP15R0_VENDOR_MASK) != CP15R0_XSCALE_VALUE) {
2069 pr_err("%s: not XScale!\n", driver_name);
2070 return -ENODEV;
2071 }
2072
2073 /* trigger chiprev-specific logic */
2074 switch (chiprev & CP15R0_PRODREV_MASK) {
2075 #if defined(CONFIG_ARCH_PXA)
2076 case PXA255_A0:
2077 dev->has_cfr = 1;
2078 break;
2079 case PXA250_A0:
2080 case PXA250_A1:
2081 /* A0/A1 "not released"; ep 13, 15 unusable */
2082 /* fall through */
2083 case PXA250_B2: case PXA210_B2:
2084 case PXA250_B1: case PXA210_B1:
2085 case PXA250_B0: case PXA210_B0:
2086 /* OUT-DMA is broken ... */
2087 /* fall through */
2088 case PXA250_C0: case PXA210_C0:
2089 break;
2090 #elif defined(CONFIG_ARCH_IXP4XX)
2091 case IXP425_A0:
2092 case IXP425_B0:
2093 case IXP465_AD:
2094 dev->has_cfr = 1;
2095 break;
2096 #endif
2097 default:
2098 pr_err("%s: unrecognized processor: %08x\n",
2099 driver_name, chiprev);
2100 /* iop3xx, ixp4xx, ... */
2101 return -ENODEV;
2102 }
2103
2104 irq = platform_get_irq(pdev, 0);
2105 if (irq < 0)
2106 return -ENODEV;
2107
2108 dev->clk = clk_get(&pdev->dev, NULL);
2109 if (IS_ERR(dev->clk)) {
2110 retval = PTR_ERR(dev->clk);
2111 goto err_clk;
2112 }
2113
2114 pr_debug("%s: IRQ %d%s%s\n", driver_name, irq,
2115 dev->has_cfr ? "" : " (!cfr)",
2116 SIZE_STR "(pio)"
2117 );
2118
2119 /* other non-static parts of init */
2120 dev->dev = &pdev->dev;
2121 dev->mach = dev_get_platdata(&pdev->dev);
2122
2123 dev->transceiver = usb_get_phy(USB_PHY_TYPE_USB2);
2124
2125 if (gpio_is_valid(dev->mach->gpio_pullup)) {
2126 if ((retval = gpio_request(dev->mach->gpio_pullup,
2127 "pca25x_udc GPIO PULLUP"))) {
2128 dev_dbg(&pdev->dev,
2129 "can't get pullup gpio %d, err: %d\n",
2130 dev->mach->gpio_pullup, retval);
2131 goto err_gpio_pullup;
2132 }
2133 gpio_direction_output(dev->mach->gpio_pullup, 0);
2134 }
2135
2136 init_timer(&dev->timer);
2137 dev->timer.function = udc_watchdog;
2138 dev->timer.data = (unsigned long) dev;
2139
2140 the_controller = dev;
2141 platform_set_drvdata(pdev, dev);
2142
2143 udc_disable(dev);
2144 udc_reinit(dev);
2145
2146 dev->vbus = 0;
2147
2148 /* irq setup after old hardware state is cleaned up */
2149 retval = request_irq(irq, pxa25x_udc_irq,
2150 0, driver_name, dev);
2151 if (retval != 0) {
2152 pr_err("%s: can't get irq %d, err %d\n",
2153 driver_name, irq, retval);
2154 goto err_irq1;
2155 }
2156 dev->got_irq = 1;
2157
2158 #ifdef CONFIG_ARCH_LUBBOCK
2159 if (machine_is_lubbock()) {
2160 retval = request_irq(LUBBOCK_USB_DISC_IRQ, lubbock_vbus_irq,
2161 0, driver_name, dev);
2162 if (retval != 0) {
2163 pr_err("%s: can't get irq %i, err %d\n",
2164 driver_name, LUBBOCK_USB_DISC_IRQ, retval);
2165 goto err_irq_lub;
2166 }
2167 retval = request_irq(LUBBOCK_USB_IRQ, lubbock_vbus_irq,
2168 0, driver_name, dev);
2169 if (retval != 0) {
2170 pr_err("%s: can't get irq %i, err %d\n",
2171 driver_name, LUBBOCK_USB_IRQ, retval);
2172 goto lubbock_fail0;
2173 }
2174 } else
2175 #endif
2176 create_debug_files(dev);
2177
2178 retval = usb_add_gadget_udc(&pdev->dev, &dev->gadget);
2179 if (!retval)
2180 return retval;
2181
2182 remove_debug_files(dev);
2183 #ifdef CONFIG_ARCH_LUBBOCK
2184 lubbock_fail0:
2185 free_irq(LUBBOCK_USB_DISC_IRQ, dev);
2186 err_irq_lub:
2187 free_irq(irq, dev);
2188 #endif
2189 err_irq1:
2190 if (gpio_is_valid(dev->mach->gpio_pullup))
2191 gpio_free(dev->mach->gpio_pullup);
2192 err_gpio_pullup:
2193 if (!IS_ERR_OR_NULL(dev->transceiver)) {
2194 usb_put_phy(dev->transceiver);
2195 dev->transceiver = NULL;
2196 }
2197 clk_put(dev->clk);
2198 err_clk:
2199 return retval;
2200 }
2201
2202 static void pxa25x_udc_shutdown(struct platform_device *_dev)
2203 {
2204 pullup_off();
2205 }
2206
2207 static int pxa25x_udc_remove(struct platform_device *pdev)
2208 {
2209 struct pxa25x_udc *dev = platform_get_drvdata(pdev);
2210
2211 if (dev->driver)
2212 return -EBUSY;
2213
2214 usb_del_gadget_udc(&dev->gadget);
2215 dev->pullup = 0;
2216 pullup(dev);
2217
2218 remove_debug_files(dev);
2219
2220 if (dev->got_irq) {
2221 free_irq(platform_get_irq(pdev, 0), dev);
2222 dev->got_irq = 0;
2223 }
2224 #ifdef CONFIG_ARCH_LUBBOCK
2225 if (machine_is_lubbock()) {
2226 free_irq(LUBBOCK_USB_DISC_IRQ, dev);
2227 free_irq(LUBBOCK_USB_IRQ, dev);
2228 }
2229 #endif
2230 if (gpio_is_valid(dev->mach->gpio_pullup))
2231 gpio_free(dev->mach->gpio_pullup);
2232
2233 clk_put(dev->clk);
2234
2235 if (!IS_ERR_OR_NULL(dev->transceiver)) {
2236 usb_put_phy(dev->transceiver);
2237 dev->transceiver = NULL;
2238 }
2239
2240 the_controller = NULL;
2241 return 0;
2242 }
2243
2244 /*-------------------------------------------------------------------------*/
2245
2246 #ifdef CONFIG_PM
2247
2248 /* USB suspend (controlled by the host) and system suspend (controlled
2249 * by the PXA) don't necessarily work well together. If USB is active,
2250 * the 48 MHz clock is required; so the system can't enter 33 MHz idle
2251 * mode, or any deeper PM saving state.
2252 *
2253 * For now, we punt and forcibly disconnect from the USB host when PXA
2254 * enters any suspend state. While we're disconnected, we always disable
2255 * the 48MHz USB clock ... allowing PXA sleep and/or 33 MHz idle states.
2256 * Boards without software pullup control shouldn't use those states.
2257 * VBUS IRQs should probably be ignored so that the PXA device just acts
2258 * "dead" to USB hosts until system resume.
2259 */
2260 static int pxa25x_udc_suspend(struct platform_device *dev, pm_message_t state)
2261 {
2262 struct pxa25x_udc *udc = platform_get_drvdata(dev);
2263 unsigned long flags;
2264
2265 if (!gpio_is_valid(udc->mach->gpio_pullup) && !udc->mach->udc_command)
2266 WARNING("USB host won't detect disconnect!\n");
2267 udc->suspended = 1;
2268
2269 local_irq_save(flags);
2270 pullup(udc);
2271 local_irq_restore(flags);
2272
2273 return 0;
2274 }
2275
2276 static int pxa25x_udc_resume(struct platform_device *dev)
2277 {
2278 struct pxa25x_udc *udc = platform_get_drvdata(dev);
2279 unsigned long flags;
2280
2281 udc->suspended = 0;
2282 local_irq_save(flags);
2283 pullup(udc);
2284 local_irq_restore(flags);
2285
2286 return 0;
2287 }
2288
2289 #else
2290 #define pxa25x_udc_suspend NULL
2291 #define pxa25x_udc_resume NULL
2292 #endif
2293
2294 /*-------------------------------------------------------------------------*/
2295
2296 static struct platform_driver udc_driver = {
2297 .shutdown = pxa25x_udc_shutdown,
2298 .probe = pxa25x_udc_probe,
2299 .remove = pxa25x_udc_remove,
2300 .suspend = pxa25x_udc_suspend,
2301 .resume = pxa25x_udc_resume,
2302 .driver = {
2303 .owner = THIS_MODULE,
2304 .name = "pxa25x-udc",
2305 },
2306 };
2307
2308 module_platform_driver(udc_driver);
2309
2310 MODULE_DESCRIPTION(DRIVER_DESC);
2311 MODULE_AUTHOR("Frank Becker, Robert Schwebel, David Brownell");
2312 MODULE_LICENSE("GPL");
2313 MODULE_ALIAS("platform:pxa25x-udc");
Linux kernel - Deliverables
This page took 0.078932 seconds and 5 git commands to generate.