drivers/usb/gadget/udc/Kconfig

   1 #
   2 # USB Gadget support on a system involves
   3 #    (a) a peripheral controller, and
   4 #    (b) the gadget driver using it.
   5 #
   6 # NOTE:  Gadget support ** DOES NOT ** depend on host-side CONFIG_USB !!
   7 #
   8 #  - Host systems (like PCs) need CONFIG_USB (with "A" jacks).
   9 #  - Peripherals (like PDAs) need CONFIG_USB_GADGET (with "B" jacks).
  10 #  - Some systems have both kinds of controllers.
  11 #
  12 # With help from a special transceiver and a "Mini-AB" jack, systems with
  13 # both kinds of controller can also support "USB On-the-Go" (CONFIG_USB_OTG).
  14 #
  15
  16 #
  17 # USB Peripheral Controller Support
  18 #
  19 # The order here is alphabetical, except that integrated controllers go
  20 # before discrete ones so they will be the initial/default value:
  21 #   - integrated/SOC controllers first
  22 #   - licensed IP used in both SOC and discrete versions
  23 #   - discrete ones (including all PCI-only controllers)
  24 #   - debug/dummy gadget+hcd is last.
  25 #
  26 menu "USB Peripheral Controller"
  27
  28 #
  29 # Integrated controllers
  30 #
  31
  32 config USB_AT91
  33         tristate "Atmel AT91 USB Device Port"
  34         depends on ARCH_AT91
  35         depends on OF || COMPILE_TEST
  36         help
  37            Many Atmel AT91 processors (such as the AT91RM2000) have a
  38            full speed USB Device Port with support for five configurable
  39            endpoints (plus endpoint zero).
  40
  41            Say "y" to link the driver statically, or "m" to build a
  42            dynamically linked module called "at91_udc" and force all
  43            gadget drivers to also be dynamically linked.
  44
  45 config USB_LPC32XX
  46         tristate "LPC32XX USB Peripheral Controller"
  47         depends on ARCH_LPC32XX && I2C
  48         select USB_ISP1301
  49         help
  50            This option selects the USB device controller in the LPC32xx SoC.
  51
  52            Say "y" to link the driver statically, or "m" to build a
  53            dynamically linked module called "lpc32xx_udc" and force all
  54            gadget drivers to also be dynamically linked.
  55
  56 config USB_ATMEL_USBA
  57         tristate "Atmel USBA"
  58         depends on ((AVR32 && !OF) || ARCH_AT91)
  59         help
  60           USBA is the integrated high-speed USB Device controller on
  61           the AT32AP700x, some AT91SAM9 and AT91CAP9 processors from Atmel.
  62
  63 config USB_BCM63XX_UDC
  64         tristate "Broadcom BCM63xx Peripheral Controller"
  65         depends on BCM63XX
  66         help
  67            Many Broadcom BCM63xx chipsets (such as the BCM6328) have a
  68            high speed USB Device Port with support for four fixed endpoints
  69            (plus endpoint zero).
  70
  71            Say "y" to link the driver statically, or "m" to build a
  72            dynamically linked module called "bcm63xx_udc".
  73
  74 config USB_FSL_USB2
  75         tristate "Freescale Highspeed USB DR Peripheral Controller"
  76         depends on FSL_SOC || ARCH_MXC
  77         help
  78            Some of Freescale PowerPC and i.MX processors have a High Speed
  79            Dual-Role(DR) USB controller, which supports device mode.
  80
  81            The number of programmable endpoints is different through
  82            SOC revisions.
  83
  84            Say "y" to link the driver statically, or "m" to build a
  85            dynamically linked module called "fsl_usb2_udc" and force
  86            all gadget drivers to also be dynamically linked.
  87
  88 config USB_FUSB300
  89         tristate "Faraday FUSB300 USB Peripheral Controller"
  90         depends on !PHYS_ADDR_T_64BIT && HAS_DMA
  91         help
  92            Faraday usb device controller FUSB300 driver
  93
  94 config USB_FOTG210_UDC
  95         depends on HAS_DMA
  96         tristate "Faraday FOTG210 USB Peripheral Controller"
  97         help
  98            Faraday USB2.0 OTG controller which can be configured as
  99            high speed or full speed USB device. This driver supppors
 100            Bulk Transfer so far.
 101
 102            Say "y" to link the driver statically, or "m" to build a
 103            dynamically linked module called "fotg210_udc".
 104
 105 config USB_GR_UDC
 106        tristate "Aeroflex Gaisler GRUSBDC USB Peripheral Controller Driver"
 107        depends on HAS_DMA
 108        help
 109           Select this to support Aeroflex Gaisler GRUSBDC cores from the GRLIB
 110           VHDL IP core library.
 111
 112 config USB_OMAP
 113         tristate "OMAP USB Device Controller"
 114         depends on ARCH_OMAP1
 115         depends on ISP1301_OMAP || !(MACH_OMAP_H2 || MACH_OMAP_H3)
 116         help
 117            Many Texas Instruments OMAP processors have flexible full
 118            speed USB device controllers, with support for up to 30
 119            endpoints (plus endpoint zero).  This driver supports the
 120            controller in the OMAP 1611, and should work with controllers
 121            in other OMAP processors too, given minor tweaks.
 122
 123            Say "y" to link the driver statically, or "m" to build a
 124            dynamically linked module called "omap_udc" and force all
 125            gadget drivers to also be dynamically linked.
 126
 127 config USB_PXA25X
 128         tristate "PXA 25x or IXP 4xx"
 129         depends on (ARCH_PXA && PXA25x) || ARCH_IXP4XX
 130         depends on HAS_IOMEM
 131         help
 132            Intel's PXA 25x series XScale ARM-5TE processors include
 133            an integrated full speed USB 1.1 device controller.  The
 134            controller in the IXP 4xx series is register-compatible.
 135
 136            It has fifteen fixed-function endpoints, as well as endpoint
 137            zero (for control transfers).
 138
 139            Say "y" to link the driver statically, or "m" to build a
 140            dynamically linked module called "pxa25x_udc" and force all
 141            gadget drivers to also be dynamically linked.
 142
 143 # if there's only one gadget driver, using only two bulk endpoints,
 144 # don't waste memory for the other endpoints
 145 config USB_PXA25X_SMALL
 146         depends on USB_PXA25X
 147         bool
 148         default n if USB_ETH_RNDIS
 149         default y if USB_ZERO
 150         default y if USB_ETH
 151         default y if USB_G_SERIAL
 152
 153 config USB_R8A66597
 154         tristate "Renesas R8A66597 USB Peripheral Controller"
 155         depends on HAS_DMA
 156         help
 157            R8A66597 is a discrete USB host and peripheral controller chip that
 158            supports both full and high speed USB 2.0 data transfers.
 159            It has nine configurable endpoints, and endpoint zero.
 160
 161            Say "y" to link the driver statically, or "m" to build a
 162            dynamically linked module called "r8a66597_udc" and force all
 163            gadget drivers to also be dynamically linked.
 164
 165 config USB_RENESAS_USBHS_UDC
 166         tristate 'Renesas USBHS controller'
 167         depends on USB_RENESAS_USBHS && HAS_DMA
 168         help
 169            Renesas USBHS is a discrete USB host and peripheral controller chip
 170            that supports both full and high speed USB 2.0 data transfers.
 171            It has nine or more configurable endpoints, and endpoint zero.
 172
 173            Say "y" to link the driver statically, or "m" to build a
 174            dynamically linked module called "renesas_usbhs" and force all
 175            gadget drivers to also be dynamically linked.
 176
 177 config USB_RENESAS_USB3
 178         tristate 'Renesas USB3.0 Peripheral controller'
 179         depends on ARCH_RENESAS || COMPILE_TEST
 180         help
 181            Renesas USB3.0 Peripheral controller is a USB peripheral controller
 182            that supports super, high, and full speed USB 3.0 data transfers.
 183
 184            Say "y" to link the driver statically, or "m" to build a
 185            dynamically linked module called "renesas_usb3" and force all
 186            gadget drivers to also be dynamically linked.
 187
 188 config USB_PXA27X
 189         tristate "PXA 27x"
 190         depends on HAS_IOMEM
 191         help
 192            Intel's PXA 27x series XScale ARM v5TE processors include
 193            an integrated full speed USB 1.1 device controller.
 194
 195            It has up to 23 endpoints, as well as endpoint zero (for
 196            control transfers).
 197
 198            Say "y" to link the driver statically, or "m" to build a
 199            dynamically linked module called "pxa27x_udc" and force all
 200            gadget drivers to also be dynamically linked.
 201
 202 config USB_S3C2410
 203         tristate "S3C2410 USB Device Controller"
 204         depends on ARCH_S3C24XX
 205         help
 206           Samsung's S3C2410 is an ARM-4 processor with an integrated
 207           full speed USB 1.1 device controller.  It has 4 configurable
 208           endpoints, as well as endpoint zero (for control transfers).
 209
 210           This driver has been tested on the S3C2410, S3C2412, and
 211           S3C2440 processors.
 212
 213 config USB_S3C2410_DEBUG
 214         bool "S3C2410 udc debug messages"
 215         depends on USB_S3C2410
 216
 217 config USB_S3C_HSUDC
 218         tristate "S3C2416, S3C2443 and S3C2450 USB Device Controller"
 219         depends on ARCH_S3C24XX
 220         help
 221           Samsung's S3C2416, S3C2443 and S3C2450 is an ARM9 based SoC
 222           integrated with dual speed USB 2.0 device controller. It has
 223           8 endpoints, as well as endpoint zero.
 224
 225           This driver has been tested on S3C2416 and S3C2450 processors.
 226
 227 config USB_MV_UDC
 228         tristate "Marvell USB2.0 Device Controller"
 229         depends on HAS_DMA
 230         help
 231           Marvell Socs (including PXA and MMP series) include a high speed
 232           USB2.0 OTG controller, which can be configured as high speed or
 233           full speed USB peripheral.
 234
 235 config USB_MV_U3D
 236         depends on HAS_DMA
 237         tristate "MARVELL PXA2128 USB 3.0 controller"
 238         help
 239           MARVELL PXA2128 Processor series include a super speed USB3.0 device
 240           controller, which support super speed USB peripheral.
 241
 242 #
 243 # Controllers available in both integrated and discrete versions
 244 #
 245
 246 config USB_M66592
 247         tristate "Renesas M66592 USB Peripheral Controller"
 248         depends on HAS_IOMEM
 249         help
 250            M66592 is a discrete USB peripheral controller chip that
 251            supports both full and high speed USB 2.0 data transfers.
 252            It has seven configurable endpoints, and endpoint zero.
 253
 254            Say "y" to link the driver statically, or "m" to build a
 255            dynamically linked module called "m66592_udc" and force all
 256            gadget drivers to also be dynamically linked.
 257
 258 source "drivers/usb/gadget/udc/bdc/Kconfig"
 259
 260 #
 261 # Controllers available only in discrete form (and all PCI controllers)
 262 #
 263
 264 config USB_AMD5536UDC
 265         tristate "AMD5536 UDC"
 266         depends on PCI
 267         help
 268            The AMD5536 UDC is part of the AMD Geode CS5536, an x86 southbridge.
 269            It is a USB Highspeed DMA capable USB device controller. Beside ep0
 270            it provides 4 IN and 4 OUT endpoints (bulk or interrupt type).
 271            The UDC port supports OTG operation, and may be used as a host port
 272            if it's not being used to implement peripheral or OTG roles.
 273
 274            Say "y" to link the driver statically, or "m" to build a
 275            dynamically linked module called "amd5536udc" and force all
 276            gadget drivers to also be dynamically linked.
 277
 278 config USB_FSL_QE
 279         tristate "Freescale QE/CPM USB Device Controller"
 280         depends on FSL_SOC && (QUICC_ENGINE || CPM)
 281         help
 282            Some of Freescale PowerPC processors have a Full Speed
 283            QE/CPM2 USB controller, which support device mode with 4
 284            programmable endpoints. This driver supports the
 285            controller in the MPC8360 and MPC8272, and should work with
 286            controllers having QE or CPM2, given minor tweaks.
 287
 288            Set CONFIG_USB_GADGET to "m" to build this driver as a
 289            dynamically linked module called "fsl_qe_udc".
 290
 291 config USB_NET2272
 292         depends on HAS_IOMEM
 293         tristate "PLX NET2272"
 294         help
 295           PLX NET2272 is a USB peripheral controller which supports
 296           both full and high speed USB 2.0 data transfers.
 297
 298           It has three configurable endpoints, as well as endpoint zero
 299           (for control transfer).
 300           Say "y" to link the driver statically, or "m" to build a
 301           dynamically linked module called "net2272" and force all
 302           gadget drivers to also be dynamically linked.
 303
 304 config USB_NET2272_DMA
 305         bool "Support external DMA controller"
 306         depends on USB_NET2272 && HAS_DMA
 307         help
 308           The NET2272 part can optionally support an external DMA
 309           controller, but your board has to have support in the
 310           driver itself.
 311
 312           If unsure, say "N" here.  The driver works fine in PIO mode.
 313
 314 config USB_NET2280
 315         tristate "NetChip NET228x / PLX USB3x8x"
 316         depends on PCI
 317         help
 318            NetChip 2280 / 2282 is a PCI based USB peripheral controller which
 319            supports both full and high speed USB 2.0 data transfers.
 320
 321            It has six configurable endpoints, as well as endpoint zero
 322            (for control transfers) and several endpoints with dedicated
 323            functions.
 324
 325            PLX 2380 is a PCIe version of the PLX 2380.
 326
 327            PLX 3380 / 3382 is a PCIe based USB peripheral controller which
 328            supports full, high speed USB 2.0 and super speed USB 3.0
 329            data transfers.
 330
 331            It has eight configurable endpoints, as well as endpoint zero
 332            (for control transfers) and several endpoints with dedicated
 333            functions.
 334
 335            Say "y" to link the driver statically, or "m" to build a
 336            dynamically linked module called "net2280" and force all
 337            gadget drivers to also be dynamically linked.
 338
 339 config USB_GOKU
 340         tristate "Toshiba TC86C001 'Goku-S'"
 341         depends on PCI
 342         help
 343            The Toshiba TC86C001 is a PCI device which includes controllers
 344            for full speed USB devices, IDE, I2C, SIO, plus a USB host (OHCI).
 345
 346            The device controller has three configurable (bulk or interrupt)
 347            endpoints, plus endpoint zero (for control transfers).
 348
 349            Say "y" to link the driver statically, or "m" to build a
 350            dynamically linked module called "goku_udc" and to force all
 351            gadget drivers to also be dynamically linked.
 352
 353 config USB_EG20T
 354         tristate "Intel QUARK X1000/EG20T PCH/LAPIS Semiconductor IOH(ML7213/ML7831) UDC"
 355         depends on PCI
 356         help
 357           This is a USB device driver for EG20T PCH.
 358           EG20T PCH is the platform controller hub that is used in Intel's
 359           general embedded platform. EG20T PCH has USB device interface.
 360           Using this interface, it is able to access system devices connected
 361           to USB device.
 362           This driver enables USB device function.
 363           USB device is a USB peripheral controller which
 364           supports both full and high speed USB 2.0 data transfers.
 365           This driver supports both control transfer and bulk transfer modes.
 366           This driver dose not support interrupt transfer or isochronous
 367           transfer modes.
 368
 369           This driver also can be used for LAPIS Semiconductor's ML7213 which is
 370           for IVI(In-Vehicle Infotainment) use.
 371           ML7831 is for general purpose use.
 372           ML7213/ML7831 is companion chip for Intel Atom E6xx series.
 373           ML7213/ML7831 is completely compatible for Intel EG20T PCH.
 374
 375           This driver can be used with Intel's Quark X1000 SOC platform
 376
 377 config USB_GADGET_XILINX
 378         tristate "Xilinx USB Driver"
 379         depends on HAS_DMA
 380         depends on OF || COMPILE_TEST
 381         help
 382           USB peripheral controller driver for Xilinx USB2 device.
 383           Xilinx USB2 device is a soft IP which supports both full
 384           and high speed USB 2.0 data transfers. It has seven configurable
 385           endpoints(bulk or interrupt or isochronous), as well as
 386           endpoint zero(for control transfers).
 387
 388           Say "y" to link the driver statically, or "m" to build a
 389           dynamically linked module called "udc-xilinx" and force all
 390           gadget drivers to also be dynamically linked.
 391
 392 #
 393 # LAST -- dummy/emulated controller
 394 #
 395
 396 config USB_DUMMY_HCD
 397         tristate "Dummy HCD (DEVELOPMENT)"
 398         depends on USB=y || (USB=m && USB_GADGET=m)
 399         help
 400           This host controller driver emulates USB, looping all data transfer
 401           requests back to a USB "gadget driver" in the same host.  The host
 402           side is the master; the gadget side is the slave.  Gadget drivers
 403           can be high, full, or low speed; and they have access to endpoints
 404           like those from NET2280, PXA2xx, or SA1100 hardware.
 405
 406           This may help in some stages of creating a driver to embed in a
 407           Linux device, since it lets you debug several parts of the gadget
 408           driver without its hardware or drivers being involved.
 409
 410           Since such a gadget side driver needs to interoperate with a host
 411           side Linux-USB device driver, this may help to debug both sides
 412           of a USB protocol stack.
 413
 414           Say "y" to link the driver statically, or "m" to build a
 415           dynamically linked module called "dummy_hcd" and force all
 416           gadget drivers to also be dynamically linked.
 417
 418 # NOTE:  Please keep dummy_hcd LAST so that "real hardware" appears
 419 # first and will be selected by default.
 420
 421 endmenu