drivers/usb/gadget/udc/Kconfig

   1 #
   2 # USB Gadget support on a system involves
   3 #    (a) a peripheral controller, and
   4 #    (b) the gadget driver using it.
   5 #
   6 # NOTE:  Gadget support ** DOES NOT ** depend on host-side CONFIG_USB !!
   7 #
   8 #  - Host systems (like PCs) need CONFIG_USB (with "A" jacks).
   9 #  - Peripherals (like PDAs) need CONFIG_USB_GADGET (with "B" jacks).
  10 #  - Some systems have both kinds of controllers.
  11 #
  12 # With help from a special transceiver and a "Mini-AB" jack, systems with
  13 # both kinds of controller can also support "USB On-the-Go" (CONFIG_USB_OTG).
  14 #
  15
  16 #
  17 # USB Peripheral Controller Support
  18 #
  19 # The order here is alphabetical, except that integrated controllers go
  20 # before discrete ones so they will be the initial/default value:
  21 #   - integrated/SOC controllers first
  22 #   - licensed IP used in both SOC and discrete versions
  23 #   - discrete ones (including all PCI-only controllers)
  24 #   - debug/dummy gadget+hcd is last.
  25 #
  26 menu "USB Peripheral Controller"
  27
  28 #
  29 # Integrated controllers
  30 #
  31
  32 config USB_AT91
  33         tristate "Atmel AT91 USB Device Port"
  34         depends on ARCH_AT91
  35         help
  36            Many Atmel AT91 processors (such as the AT91RM2000) have a
  37            full speed USB Device Port with support for five configurable
  38            endpoints (plus endpoint zero).
  39
  40            Say "y" to link the driver statically, or "m" to build a
  41            dynamically linked module called "at91_udc" and force all
  42            gadget drivers to also be dynamically linked.
  43
  44 config USB_LPC32XX
  45         tristate "LPC32XX USB Peripheral Controller"
  46         depends on ARCH_LPC32XX && I2C
  47         select USB_ISP1301
  48         help
  49            This option selects the USB device controller in the LPC32xx SoC.
  50
  51            Say "y" to link the driver statically, or "m" to build a
  52            dynamically linked module called "lpc32xx_udc" and force all
  53            gadget drivers to also be dynamically linked.
  54
  55 config USB_ATMEL_USBA
  56         tristate "Atmel USBA"
  57         depends on AVR32 || ARCH_AT91
  58         help
  59           USBA is the integrated high-speed USB Device controller on
  60           the AT32AP700x, some AT91SAM9 and AT91CAP9 processors from Atmel.
  61
  62 config USB_BCM63XX_UDC
  63         tristate "Broadcom BCM63xx Peripheral Controller"
  64         depends on BCM63XX
  65         help
  66            Many Broadcom BCM63xx chipsets (such as the BCM6328) have a
  67            high speed USB Device Port with support for four fixed endpoints
  68            (plus endpoint zero).
  69
  70            Say "y" to link the driver statically, or "m" to build a
  71            dynamically linked module called "bcm63xx_udc".
  72
  73 config USB_FSL_USB2
  74         tristate "Freescale Highspeed USB DR Peripheral Controller"
  75         depends on FSL_SOC || ARCH_MXC
  76         select USB_FSL_MPH_DR_OF if OF
  77         help
  78            Some of Freescale PowerPC and i.MX processors have a High Speed
  79            Dual-Role(DR) USB controller, which supports device mode.
  80
  81            The number of programmable endpoints is different through
  82            SOC revisions.
  83
  84            Say "y" to link the driver statically, or "m" to build a
  85            dynamically linked module called "fsl_usb2_udc" and force
  86            all gadget drivers to also be dynamically linked.
  87
  88 config USB_FUSB300
  89         tristate "Faraday FUSB300 USB Peripheral Controller"
  90         depends on !PHYS_ADDR_T_64BIT && HAS_DMA
  91         help
  92            Faraday usb device controller FUSB300 driver
  93
  94 config USB_FOTG210_UDC
  95         depends on HAS_DMA
  96         tristate "Faraday FOTG210 USB Peripheral Controller"
  97         help
  98            Faraday USB2.0 OTG controller which can be configured as
  99            high speed or full speed USB device. This driver supppors
 100            Bulk Transfer so far.
 101
 102            Say "y" to link the driver statically, or "m" to build a
 103            dynamically linked module called "fotg210_udc".
 104
 105 config USB_GR_UDC
 106        tristate "Aeroflex Gaisler GRUSBDC USB Peripheral Controller Driver"
 107        depends on HAS_DMA
 108        help
 109           Select this to support Aeroflex Gaisler GRUSBDC cores from the GRLIB
 110           VHDL IP core library.
 111
 112 config USB_OMAP
 113         tristate "OMAP USB Device Controller"
 114         depends on ARCH_OMAP1
 115         depends on ISP1301_OMAP || !(MACH_OMAP_H2 || MACH_OMAP_H3)
 116         help
 117            Many Texas Instruments OMAP processors have flexible full
 118            speed USB device controllers, with support for up to 30
 119            endpoints (plus endpoint zero).  This driver supports the
 120            controller in the OMAP 1611, and should work with controllers
 121            in other OMAP processors too, given minor tweaks.
 122
 123            Say "y" to link the driver statically, or "m" to build a
 124            dynamically linked module called "omap_udc" and force all
 125            gadget drivers to also be dynamically linked.
 126
 127 config USB_PXA25X
 128         tristate "PXA 25x or IXP 4xx"
 129         depends on (ARCH_PXA && PXA25x) || ARCH_IXP4XX
 130         help
 131            Intel's PXA 25x series XScale ARM-5TE processors include
 132            an integrated full speed USB 1.1 device controller.  The
 133            controller in the IXP 4xx series is register-compatible.
 134
 135            It has fifteen fixed-function endpoints, as well as endpoint
 136            zero (for control transfers).
 137
 138            Say "y" to link the driver statically, or "m" to build a
 139            dynamically linked module called "pxa25x_udc" and force all
 140            gadget drivers to also be dynamically linked.
 141
 142 # if there's only one gadget driver, using only two bulk endpoints,
 143 # don't waste memory for the other endpoints
 144 config USB_PXA25X_SMALL
 145         depends on USB_PXA25X
 146         bool
 147         default n if USB_ETH_RNDIS
 148         default y if USB_ZERO
 149         default y if USB_ETH
 150         default y if USB_G_SERIAL
 151
 152 config USB_R8A66597
 153         tristate "Renesas R8A66597 USB Peripheral Controller"
 154         depends on HAS_DMA
 155         help
 156            R8A66597 is a discrete USB host and peripheral controller chip that
 157            supports both full and high speed USB 2.0 data transfers.
 158            It has nine configurable endpoints, and endpoint zero.
 159
 160            Say "y" to link the driver statically, or "m" to build a
 161            dynamically linked module called "r8a66597_udc" and force all
 162            gadget drivers to also be dynamically linked.
 163
 164 config USB_RENESAS_USBHS_UDC
 165         tristate 'Renesas USBHS controller'
 166         depends on USB_RENESAS_USBHS && HAS_DMA
 167         help
 168            Renesas USBHS is a discrete USB host and peripheral controller chip
 169            that supports both full and high speed USB 2.0 data transfers.
 170            It has nine or more configurable endpoints, and endpoint zero.
 171
 172            Say "y" to link the driver statically, or "m" to build a
 173            dynamically linked module called "renesas_usbhs" and force all
 174            gadget drivers to also be dynamically linked.
 175
 176 config USB_PXA27X
 177         tristate "PXA 27x"
 178         help
 179            Intel's PXA 27x series XScale ARM v5TE processors include
 180            an integrated full speed USB 1.1 device controller.
 181
 182            It has up to 23 endpoints, as well as endpoint zero (for
 183            control transfers).
 184
 185            Say "y" to link the driver statically, or "m" to build a
 186            dynamically linked module called "pxa27x_udc" and force all
 187            gadget drivers to also be dynamically linked.
 188
 189 config USB_S3C2410
 190         tristate "S3C2410 USB Device Controller"
 191         depends on ARCH_S3C24XX
 192         help
 193           Samsung's S3C2410 is an ARM-4 processor with an integrated
 194           full speed USB 1.1 device controller.  It has 4 configurable
 195           endpoints, as well as endpoint zero (for control transfers).
 196
 197           This driver has been tested on the S3C2410, S3C2412, and
 198           S3C2440 processors.
 199
 200 config USB_S3C2410_DEBUG
 201         boolean "S3C2410 udc debug messages"
 202         depends on USB_S3C2410
 203
 204 config USB_S3C_HSUDC
 205         tristate "S3C2416, S3C2443 and S3C2450 USB Device Controller"
 206         depends on ARCH_S3C24XX
 207         help
 208           Samsung's S3C2416, S3C2443 and S3C2450 is an ARM9 based SoC
 209           integrated with dual speed USB 2.0 device controller. It has
 210           8 endpoints, as well as endpoint zero.
 211
 212           This driver has been tested on S3C2416 and S3C2450 processors.
 213
 214 config USB_MV_UDC
 215         tristate "Marvell USB2.0 Device Controller"
 216         depends on HAS_DMA
 217         help
 218           Marvell Socs (including PXA and MMP series) include a high speed
 219           USB2.0 OTG controller, which can be configured as high speed or
 220           full speed USB peripheral.
 221
 222 config USB_MV_U3D
 223         depends on HAS_DMA
 224         tristate "MARVELL PXA2128 USB 3.0 controller"
 225         help
 226           MARVELL PXA2128 Processor series include a super speed USB3.0 device
 227           controller, which support super speed USB peripheral.
 228
 229 #
 230 # Controllers available in both integrated and discrete versions
 231 #
 232
 233 config USB_M66592
 234         tristate "Renesas M66592 USB Peripheral Controller"
 235         help
 236            M66592 is a discrete USB peripheral controller chip that
 237            supports both full and high speed USB 2.0 data transfers.
 238            It has seven configurable endpoints, and endpoint zero.
 239
 240            Say "y" to link the driver statically, or "m" to build a
 241            dynamically linked module called "m66592_udc" and force all
 242            gadget drivers to also be dynamically linked.
 243
 244 source "drivers/usb/gadget/udc/bdc/Kconfig"
 245
 246 #
 247 # Controllers available only in discrete form (and all PCI controllers)
 248 #
 249
 250 config USB_AMD5536UDC
 251         tristate "AMD5536 UDC"
 252         depends on PCI
 253         help
 254            The AMD5536 UDC is part of the AMD Geode CS5536, an x86 southbridge.
 255            It is a USB Highspeed DMA capable USB device controller. Beside ep0
 256            it provides 4 IN and 4 OUT endpoints (bulk or interrupt type).
 257            The UDC port supports OTG operation, and may be used as a host port
 258            if it's not being used to implement peripheral or OTG roles.
 259
 260            Say "y" to link the driver statically, or "m" to build a
 261            dynamically linked module called "amd5536udc" and force all
 262            gadget drivers to also be dynamically linked.
 263
 264 config USB_FSL_QE
 265         tristate "Freescale QE/CPM USB Device Controller"
 266         depends on FSL_SOC && (QUICC_ENGINE || CPM)
 267         help
 268            Some of Freescale PowerPC processors have a Full Speed
 269            QE/CPM2 USB controller, which support device mode with 4
 270            programmable endpoints. This driver supports the
 271            controller in the MPC8360 and MPC8272, and should work with
 272            controllers having QE or CPM2, given minor tweaks.
 273
 274            Set CONFIG_USB_GADGET to "m" to build this driver as a
 275            dynamically linked module called "fsl_qe_udc".
 276
 277 config USB_NET2272
 278         tristate "PLX NET2272"
 279         help
 280           PLX NET2272 is a USB peripheral controller which supports
 281           both full and high speed USB 2.0 data transfers.
 282
 283           It has three configurable endpoints, as well as endpoint zero
 284           (for control transfer).
 285           Say "y" to link the driver statically, or "m" to build a
 286           dynamically linked module called "net2272" and force all
 287           gadget drivers to also be dynamically linked.
 288
 289 config USB_NET2272_DMA
 290         boolean "Support external DMA controller"
 291         depends on USB_NET2272 && HAS_DMA
 292         help
 293           The NET2272 part can optionally support an external DMA
 294           controller, but your board has to have support in the
 295           driver itself.
 296
 297           If unsure, say "N" here.  The driver works fine in PIO mode.
 298
 299 config USB_NET2280
 300         tristate "NetChip 228x / PLX USB338x"
 301         depends on PCI
 302         help
 303            NetChip 2280 / 2282 is a PCI based USB peripheral controller which
 304            supports both full and high speed USB 2.0 data transfers.
 305
 306            It has six configurable endpoints, as well as endpoint zero
 307            (for control transfers) and several endpoints with dedicated
 308            functions.
 309
 310            PLX 3380 / 3382 is a PCIe based USB peripheral controller which
 311            supports full, high speed USB 2.0 and super speed USB 3.0
 312            data transfers.
 313
 314            It has eight configurable endpoints, as well as endpoint zero
 315            (for control transfers) and several endpoints with dedicated
 316            functions.
 317
 318            Say "y" to link the driver statically, or "m" to build a
 319            dynamically linked module called "net2280" and force all
 320            gadget drivers to also be dynamically linked.
 321
 322 config USB_GOKU
 323         tristate "Toshiba TC86C001 'Goku-S'"
 324         depends on PCI
 325         help
 326            The Toshiba TC86C001 is a PCI device which includes controllers
 327            for full speed USB devices, IDE, I2C, SIO, plus a USB host (OHCI).
 328
 329            The device controller has three configurable (bulk or interrupt)
 330            endpoints, plus endpoint zero (for control transfers).
 331
 332            Say "y" to link the driver statically, or "m" to build a
 333            dynamically linked module called "goku_udc" and to force all
 334            gadget drivers to also be dynamically linked.
 335
 336 config USB_EG20T
 337         tristate "Intel QUARK X1000/EG20T PCH/LAPIS Semiconductor IOH(ML7213/ML7831) UDC"
 338         depends on PCI
 339         help
 340           This is a USB device driver for EG20T PCH.
 341           EG20T PCH is the platform controller hub that is used in Intel's
 342           general embedded platform. EG20T PCH has USB device interface.
 343           Using this interface, it is able to access system devices connected
 344           to USB device.
 345           This driver enables USB device function.
 346           USB device is a USB peripheral controller which
 347           supports both full and high speed USB 2.0 data transfers.
 348           This driver supports both control transfer and bulk transfer modes.
 349           This driver dose not support interrupt transfer or isochronous
 350           transfer modes.
 351
 352           This driver also can be used for LAPIS Semiconductor's ML7213 which is
 353           for IVI(In-Vehicle Infotainment) use.
 354           ML7831 is for general purpose use.
 355           ML7213/ML7831 is companion chip for Intel Atom E6xx series.
 356           ML7213/ML7831 is completely compatible for Intel EG20T PCH.
 357
 358           This driver can be used with Intel's Quark X1000 SOC platform
 359
 360 config USB_GADGET_XILINX
 361         tristate "Xilinx USB Driver"
 362         depends on HAS_DMA
 363         depends on OF || COMPILE_TEST
 364         help
 365           USB peripheral controller driver for Xilinx USB2 device.
 366           Xilinx USB2 device is a soft IP which supports both full
 367           and high speed USB 2.0 data transfers. It has seven configurable
 368           endpoints(bulk or interrupt or isochronous), as well as
 369           endpoint zero(for control transfers).
 370
 371           Say "y" to link the driver statically, or "m" to build a
 372           dynamically linked module called "udc-xilinx" and force all
 373           gadget drivers to also be dynamically linked.
 374
 375 #
 376 # LAST -- dummy/emulated controller
 377 #
 378
 379 config USB_DUMMY_HCD
 380         tristate "Dummy HCD (DEVELOPMENT)"
 381         depends on USB=y || (USB=m && USB_GADGET=m)
 382         help
 383           This host controller driver emulates USB, looping all data transfer
 384           requests back to a USB "gadget driver" in the same host.  The host
 385           side is the master; the gadget side is the slave.  Gadget drivers
 386           can be high, full, or low speed; and they have access to endpoints
 387           like those from NET2280, PXA2xx, or SA1100 hardware.
 388
 389           This may help in some stages of creating a driver to embed in a
 390           Linux device, since it lets you debug several parts of the gadget
 391           driver without its hardware or drivers being involved.
 392
 393           Since such a gadget side driver needs to interoperate with a host
 394           side Linux-USB device driver, this may help to debug both sides
 395           of a USB protocol stack.
 396
 397           Say "y" to link the driver statically, or "m" to build a
 398           dynamically linked module called "dummy_hcd" and force all
 399           gadget drivers to also be dynamically linked.
 400
 401 # NOTE:  Please keep dummy_hcd LAST so that "real hardware" appears
 402 # first and will be selected by default.
 403
 404 endmenu