drivers/usb/host/ehci-fsl.c

   1 /*
   2  * Copyright (c) 2005 MontaVista Software
   3  *
   4  * This program is free software; you can redistribute it and/or modify it
   5  * under the terms of the GNU General Public License as published by the
   6  * Free Software Foundation; either version 2 of the License, or (at your
   7  * option) any later version.
   8  *
   9  * This program is distributed in the hope that it will be useful, but
  10  * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
  11  * or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
  12  * for more details.
  13  *
  14  * You should have received a copy of the GNU General Public License
  15  * along with this program; if not, write to the Free Software Foundation,
  16  * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  17  *
  18  * Ported to 834x by Randy Vinson <rvinson@mvista.com> using code provided
  19  * by Hunter Wu.
  20  */
  21
  22 #include <linux/platform_device.h>
  23 #include <linux/fsl_devices.h>
  24
  25 #include "ehci-fsl.h"
  26
  27 /* FIXME: Power Management is un-ported so temporarily disable it */
  28 #undef CONFIG_PM
  29
  30
  31 /* configure so an HC device and id are always provided */
  32 /* always called with process context; sleeping is OK */
  33
  34 /**
  35  * usb_hcd_fsl_probe - initialize FSL-based HCDs
  36  * @drvier: Driver to be used for this HCD
  37  * @pdev: USB Host Controller being probed
  38  * Context: !in_interrupt()
  39  *
  40  * Allocates basic resources for this USB host controller.
  41  *
  42  */
  43 int usb_hcd_fsl_probe(const struct hc_driver *driver,
  44                       struct platform_device *pdev)
  45 {
  46         struct fsl_usb2_platform_data *pdata;
  47         struct usb_hcd *hcd;
  48         struct resource *res;
  49         int irq;
  50         int retval;
  51         unsigned int temp;
  52
  53         pr_debug("initializing FSL-SOC USB Controller\n");
  54
  55         /* Need platform data for setup */
  56         pdata = (struct fsl_usb2_platform_data *)pdev->dev.platform_data;
  57         if (!pdata) {
  58                 dev_err(&pdev->dev,
  59                         "No platform data for %s.\n", dev_name(&pdev->dev));
  60                 return -ENODEV;
  61         }
  62
  63         /*
  64          * This is a host mode driver, verify that we're supposed to be
  65          * in host mode.
  66          */
  67         if (!((pdata->operating_mode == FSL_USB2_DR_HOST) ||
  68               (pdata->operating_mode == FSL_USB2_MPH_HOST) ||
  69               (pdata->operating_mode == FSL_USB2_DR_OTG))) {
  70                 dev_err(&pdev->dev,
  71                         "Non Host Mode configured for %s. Wrong driver linked.\n",
  72                         dev_name(&pdev->dev));
  73                 return -ENODEV;
  74         }
  75
  76         res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
  77         if (!res) {
  78                 dev_err(&pdev->dev,
  79                         "Found HC with no IRQ. Check %s setup!\n",
  80                         dev_name(&pdev->dev));
  81                 return -ENODEV;
  82         }
  83         irq = res->start;
  84
  85         hcd = usb_create_hcd(driver, &pdev->dev, dev_name(&pdev->dev));
  86         if (!hcd) {
  87                 retval = -ENOMEM;
  88                 goto err1;
  89         }
  90
  91         res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
  92         if (!res) {
  93                 dev_err(&pdev->dev,
  94                         "Found HC with no register addr. Check %s setup!\n",
  95                         dev_name(&pdev->dev));
  96                 retval = -ENODEV;
  97                 goto err2;
  98         }
  99         hcd->rsrc_start = res->start;
 100         hcd->rsrc_len = res->end - res->start + 1;
 101         if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len,
 102                                 driver->description)) {
 103                 dev_dbg(&pdev->dev, "controller already in use\n");
 104                 retval = -EBUSY;
 105                 goto err2;
 106         }
 107         hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
 108
 109         if (hcd->regs == NULL) {
 110                 dev_dbg(&pdev->dev, "error mapping memory\n");
 111                 retval = -EFAULT;
 112                 goto err3;
 113         }
 114
 115         /* Enable USB controller */
 116         temp = in_be32(hcd->regs + 0x500);
 117         out_be32(hcd->regs + 0x500, temp | 0x4);
 118
 119         /* Set to Host mode */
 120         temp = in_le32(hcd->regs + 0x1a8);
 121         out_le32(hcd->regs + 0x1a8, temp | 0x3);
 122
 123         retval = usb_add_hcd(hcd, irq, IRQF_DISABLED | IRQF_SHARED);
 124         if (retval != 0)
 125                 goto err4;
 126         return retval;
 127
 128       err4:
 129         iounmap(hcd->regs);
 130       err3:
 131         release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
 132       err2:
 133         usb_put_hcd(hcd);
 134       err1:
 135         dev_err(&pdev->dev, "init %s fail, %d\n", dev_name(&pdev->dev), retval);
 136         return retval;
 137 }
 138
 139 /* may be called without controller electrically present */
 140 /* may be called with controller, bus, and devices active */
 141
 142 /**
 143  * usb_hcd_fsl_remove - shutdown processing for FSL-based HCDs
 144  * @dev: USB Host Controller being removed
 145  * Context: !in_interrupt()
 146  *
 147  * Reverses the effect of usb_hcd_fsl_probe().
 148  *
 149  */
 150 void usb_hcd_fsl_remove(struct usb_hcd *hcd, struct platform_device *pdev)
 151 {
 152         usb_remove_hcd(hcd);
 153         iounmap(hcd->regs);
 154         release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
 155         usb_put_hcd(hcd);
 156 }
 157
 158 static void mpc83xx_setup_phy(struct ehci_hcd *ehci,
 159                               enum fsl_usb2_phy_modes phy_mode,
 160                               unsigned int port_offset)
 161 {
 162         u32 portsc = 0;
 163         switch (phy_mode) {
 164         case FSL_USB2_PHY_ULPI:
 165                 portsc |= PORT_PTS_ULPI;
 166                 break;
 167         case FSL_USB2_PHY_SERIAL:
 168                 portsc |= PORT_PTS_SERIAL;
 169                 break;
 170         case FSL_USB2_PHY_UTMI_WIDE:
 171                 portsc |= PORT_PTS_PTW;
 172                 /* fall through */
 173         case FSL_USB2_PHY_UTMI:
 174                 portsc |= PORT_PTS_UTMI;
 175                 break;
 176         case FSL_USB2_PHY_NONE:
 177                 break;
 178         }
 179         ehci_writel(ehci, portsc, &ehci->regs->port_status[port_offset]);
 180 }
 181
 182 static void mpc83xx_usb_setup(struct usb_hcd *hcd)
 183 {
 184         struct ehci_hcd *ehci = hcd_to_ehci(hcd);
 185         struct fsl_usb2_platform_data *pdata;
 186         void __iomem *non_ehci = hcd->regs;
 187         u32 temp;
 188
 189         pdata =
 190             (struct fsl_usb2_platform_data *)hcd->self.controller->
 191             platform_data;
 192         /* Enable PHY interface in the control reg. */
 193         temp = in_be32(non_ehci + FSL_SOC_USB_CTRL);
 194         out_be32(non_ehci + FSL_SOC_USB_CTRL, temp | 0x00000004);
 195         out_be32(non_ehci + FSL_SOC_USB_SNOOP1, 0x0000001b);
 196
 197 #if defined(CONFIG_PPC32) && !defined(CONFIG_NOT_COHERENT_CACHE)
 198         /*
 199          * Turn on cache snooping hardware, since some PowerPC platforms
 200          * wholly rely on hardware to deal with cache coherent
 201          */
 202
 203         /* Setup Snooping for all the 4GB space */
 204         /* SNOOP1 starts from 0x0, size 2G */
 205         out_be32(non_ehci + FSL_SOC_USB_SNOOP1, 0x0 | SNOOP_SIZE_2GB);
 206         /* SNOOP2 starts from 0x80000000, size 2G */
 207         out_be32(non_ehci + FSL_SOC_USB_SNOOP2, 0x80000000 | SNOOP_SIZE_2GB);
 208 #endif
 209
 210         if ((pdata->operating_mode == FSL_USB2_DR_HOST) ||
 211                         (pdata->operating_mode == FSL_USB2_DR_OTG))
 212                 mpc83xx_setup_phy(ehci, pdata->phy_mode, 0);
 213
 214         if (pdata->operating_mode == FSL_USB2_MPH_HOST) {
 215                 unsigned int chip, rev, svr;
 216
 217                 svr = mfspr(SPRN_SVR);
 218                 chip = svr >> 16;
 219                 rev = (svr >> 4) & 0xf;
 220
 221                 /* Deal with USB Erratum #14 on MPC834x Rev 1.0 & 1.1 chips */
 222                 if ((rev == 1) && (chip >= 0x8050) && (chip <= 0x8055))
 223                         ehci->has_fsl_port_bug = 1;
 224
 225                 if (pdata->port_enables & FSL_USB2_PORT0_ENABLED)
 226                         mpc83xx_setup_phy(ehci, pdata->phy_mode, 0);
 227                 if (pdata->port_enables & FSL_USB2_PORT1_ENABLED)
 228                         mpc83xx_setup_phy(ehci, pdata->phy_mode, 1);
 229         }
 230
 231         /* put controller in host mode. */
 232         ehci_writel(ehci, 0x00000003, non_ehci + FSL_SOC_USB_USBMODE);
 233 #ifdef CONFIG_PPC_85xx
 234         out_be32(non_ehci + FSL_SOC_USB_PRICTRL, 0x00000008);
 235         out_be32(non_ehci + FSL_SOC_USB_AGECNTTHRSH, 0x00000080);
 236 #else
 237         out_be32(non_ehci + FSL_SOC_USB_PRICTRL, 0x0000000c);
 238         out_be32(non_ehci + FSL_SOC_USB_AGECNTTHRSH, 0x00000040);
 239 #endif
 240         out_be32(non_ehci + FSL_SOC_USB_SICTRL, 0x00000001);
 241 }
 242
 243 /* called after powerup, by probe or system-pm "wakeup" */
 244 static int ehci_fsl_reinit(struct ehci_hcd *ehci)
 245 {
 246         mpc83xx_usb_setup(ehci_to_hcd(ehci));
 247         ehci_port_power(ehci, 0);
 248
 249         return 0;
 250 }
 251
 252 /* called during probe() after chip reset completes */
 253 static int ehci_fsl_setup(struct usb_hcd *hcd)
 254 {
 255         struct ehci_hcd *ehci = hcd_to_ehci(hcd);
 256         int retval;
 257
 258         /* EHCI registers start at offset 0x100 */
 259         ehci->caps = hcd->regs + 0x100;
 260         ehci->regs = hcd->regs + 0x100 +
 261             HC_LENGTH(ehci_readl(ehci, &ehci->caps->hc_capbase));
 262         dbg_hcs_params(ehci, "reset");
 263         dbg_hcc_params(ehci, "reset");
 264
 265         /* cache this readonly data; minimize chip reads */
 266         ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params);
 267
 268         retval = ehci_halt(ehci);
 269         if (retval)
 270                 return retval;
 271
 272         /* data structure init */
 273         retval = ehci_init(hcd);
 274         if (retval)
 275                 return retval;
 276
 277         hcd->has_tt = 1;
 278
 279         ehci->sbrn = 0x20;
 280
 281         ehci_reset(ehci);
 282
 283         retval = ehci_fsl_reinit(ehci);
 284         return retval;
 285 }
 286
 287 static const struct hc_driver ehci_fsl_hc_driver = {
 288         .description = hcd_name,
 289         .product_desc = "Freescale On-Chip EHCI Host Controller",
 290         .hcd_priv_size = sizeof(struct ehci_hcd),
 291
 292         /*
 293          * generic hardware linkage
 294          */
 295         .irq = ehci_irq,
 296         .flags = HCD_USB2,
 297
 298         /*
 299          * basic lifecycle operations
 300          */
 301         .reset = ehci_fsl_setup,
 302         .start = ehci_run,
 303         .stop = ehci_stop,
 304         .shutdown = ehci_shutdown,
 305
 306         /*
 307          * managing i/o requests and associated device resources
 308          */
 309         .urb_enqueue = ehci_urb_enqueue,
 310         .urb_dequeue = ehci_urb_dequeue,
 311         .endpoint_disable = ehci_endpoint_disable,
 312
 313         /*
 314          * scheduling support
 315          */
 316         .get_frame_number = ehci_get_frame,
 317
 318         /*
 319          * root hub support
 320          */
 321         .hub_status_data = ehci_hub_status_data,
 322         .hub_control = ehci_hub_control,
 323         .bus_suspend = ehci_bus_suspend,
 324         .bus_resume = ehci_bus_resume,
 325         .relinquish_port = ehci_relinquish_port,
 326         .port_handed_over = ehci_port_handed_over,
 327 };
 328
 329 static int ehci_fsl_drv_probe(struct platform_device *pdev)
 330 {
 331         if (usb_disabled())
 332                 return -ENODEV;
 333
 334         /* FIXME we only want one one probe() not two */
 335         return usb_hcd_fsl_probe(&ehci_fsl_hc_driver, pdev);
 336 }
 337
 338 static int ehci_fsl_drv_remove(struct platform_device *pdev)
 339 {
 340         struct usb_hcd *hcd = platform_get_drvdata(pdev);
 341
 342         /* FIXME we only want one one remove() not two */
 343         usb_hcd_fsl_remove(hcd, pdev);
 344         return 0;
 345 }
 346
 347 MODULE_ALIAS("platform:fsl-ehci");
 348
 349 static struct platform_driver ehci_fsl_driver = {
 350         .probe = ehci_fsl_drv_probe,
 351         .remove = ehci_fsl_drv_remove,
 352         .shutdown = usb_hcd_platform_shutdown,
 353         .driver = {
 354                    .name = "fsl-ehci",
 355         },
 356 };