drivers/usb/host/ehci-fsl.c

   1 /*
   2  * Copyright 2005-2009 MontaVista Software, Inc.
   3  * Copyright 2008,2012      Freescale Semiconductor, Inc.
   4  *
   5  * This program is free software; you can redistribute it and/or modify it
   6  * under the terms of the GNU General Public License as published by the
   7  * Free Software Foundation; either version 2 of the License, or (at your
   8  * option) any later version.
   9  *
  10  * This program is distributed in the hope that it will be useful, but
  11  * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
  12  * or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
  13  * for more details.
  14  *
  15  * You should have received a copy of the GNU General Public License
  16  * along with this program; if not, write to the Free Software Foundation,
  17  * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  18  *
  19  * Ported to 834x by Randy Vinson <rvinson@mvista.com> using code provided
  20  * by Hunter Wu.
  21  * Power Management support by Dave Liu <daveliu@freescale.com>,
  22  * Jerry Huang <Chang-Ming.Huang@freescale.com> and
  23  * Anton Vorontsov <avorontsov@ru.mvista.com>.
  24  */
  25
  26 #include <linux/kernel.h>
  27 #include <linux/types.h>
  28 #include <linux/delay.h>
  29 #include <linux/pm.h>
  30 #include <linux/err.h>
  31 #include <linux/platform_device.h>
  32 #include <linux/fsl_devices.h>
  33
  34 #include "ehci-fsl.h"
  35
  36 /* configure so an HC device and id are always provided */
  37 /* always called with process context; sleeping is OK */
  38
  39 /**
  40  * usb_hcd_fsl_probe - initialize FSL-based HCDs
  41  * @drvier: Driver to be used for this HCD
  42  * @pdev: USB Host Controller being probed
  43  * Context: !in_interrupt()
  44  *
  45  * Allocates basic resources for this USB host controller.
  46  *
  47  */
  48 static int usb_hcd_fsl_probe(const struct hc_driver *driver,
  49                              struct platform_device *pdev)
  50 {
  51         struct fsl_usb2_platform_data *pdata;
  52         struct usb_hcd *hcd;
  53         struct resource *res;
  54         int irq;
  55         int retval;
  56
  57         pr_debug("initializing FSL-SOC USB Controller\n");
  58
  59         /* Need platform data for setup */
  60         pdata = dev_get_platdata(&pdev->dev);
  61         if (!pdata) {
  62                 dev_err(&pdev->dev,
  63                         "No platform data for %s.\n", dev_name(&pdev->dev));
  64                 return -ENODEV;
  65         }
  66
  67         /*
  68          * This is a host mode driver, verify that we're supposed to be
  69          * in host mode.
  70          */
  71         if (!((pdata->operating_mode == FSL_USB2_DR_HOST) ||
  72               (pdata->operating_mode == FSL_USB2_MPH_HOST) ||
  73               (pdata->operating_mode == FSL_USB2_DR_OTG))) {
  74                 dev_err(&pdev->dev,
  75                         "Non Host Mode configured for %s. Wrong driver linked.\n",
  76                         dev_name(&pdev->dev));
  77                 return -ENODEV;
  78         }
  79
  80         res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
  81         if (!res) {
  82                 dev_err(&pdev->dev,
  83                         "Found HC with no IRQ. Check %s setup!\n",
  84                         dev_name(&pdev->dev));
  85                 return -ENODEV;
  86         }
  87         irq = res->start;
  88
  89         hcd = usb_create_hcd(driver, &pdev->dev, dev_name(&pdev->dev));
  90         if (!hcd) {
  91                 retval = -ENOMEM;
  92                 goto err1;
  93         }
  94
  95         res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
  96         if (!res) {
  97                 dev_err(&pdev->dev,
  98                         "Found HC with no register addr. Check %s setup!\n",
  99                         dev_name(&pdev->dev));
 100                 retval = -ENODEV;
 101                 goto err2;
 102         }
 103         hcd->rsrc_start = res->start;
 104         hcd->rsrc_len = resource_size(res);
 105         hcd->regs = devm_ioremap_resource(&pdev->dev, res);
 106         if (IS_ERR(hcd->regs)) {
 107                 retval = PTR_ERR(hcd->regs);
 108                 goto err2;
 109         }
 110
 111         pdata->regs = hcd->regs;
 112
 113         if (pdata->power_budget)
 114                 hcd->power_budget = pdata->power_budget;
 115
 116         /*
 117          * do platform specific init: check the clock, grab/config pins, etc.
 118          */
 119         if (pdata->init && pdata->init(pdev)) {
 120                 retval = -ENODEV;
 121                 goto err2;
 122         }
 123
 124         /* Enable USB controller, 83xx or 8536 */
 125         if (pdata->have_sysif_regs && pdata->controller_ver < FSL_USB_VER_1_6)
 126                 setbits32(hcd->regs + FSL_SOC_USB_CTRL, 0x4);
 127
 128         /* Don't need to set host mode here. It will be done by tdi_reset() */
 129
 130         retval = usb_add_hcd(hcd, irq, IRQF_SHARED);
 131         if (retval != 0)
 132                 goto err2;
 133         device_wakeup_enable(hcd->self.controller);
 134
 135 #ifdef CONFIG_USB_OTG
 136         if (pdata->operating_mode == FSL_USB2_DR_OTG) {
 137                 struct ehci_hcd *ehci = hcd_to_ehci(hcd);
 138
 139                 hcd->phy = usb_get_phy(USB_PHY_TYPE_USB2);
 140                 dev_dbg(&pdev->dev, "hcd=0x%p  ehci=0x%p, phy=0x%p\n",
 141                         hcd, ehci, hcd->phy);
 142
 143                 if (!IS_ERR_OR_NULL(hcd->phy)) {
 144                         retval = otg_set_host(hcd->phy->otg,
 145                                               &ehci_to_hcd(ehci)->self);
 146                         if (retval) {
 147                                 usb_put_phy(hcd->phy);
 148                                 goto err2;
 149                         }
 150                 } else {
 151                         dev_err(&pdev->dev, "can't find phy\n");
 152                         retval = -ENODEV;
 153                         goto err2;
 154                 }
 155         }
 156 #endif
 157         return retval;
 158
 159       err2:
 160         usb_put_hcd(hcd);
 161       err1:
 162         dev_err(&pdev->dev, "init %s fail, %d\n", dev_name(&pdev->dev), retval);
 163         if (pdata->exit)
 164                 pdata->exit(pdev);
 165         return retval;
 166 }
 167
 168 /* may be called without controller electrically present */
 169 /* may be called with controller, bus, and devices active */
 170
 171 /**
 172  * usb_hcd_fsl_remove - shutdown processing for FSL-based HCDs
 173  * @dev: USB Host Controller being removed
 174  * Context: !in_interrupt()
 175  *
 176  * Reverses the effect of usb_hcd_fsl_probe().
 177  *
 178  */
 179 static void usb_hcd_fsl_remove(struct usb_hcd *hcd,
 180                                struct platform_device *pdev)
 181 {
 182         struct fsl_usb2_platform_data *pdata = dev_get_platdata(&pdev->dev);
 183
 184         if (!IS_ERR_OR_NULL(hcd->phy)) {
 185                 otg_set_host(hcd->phy->otg, NULL);
 186                 usb_put_phy(hcd->phy);
 187         }
 188
 189         usb_remove_hcd(hcd);
 190
 191         /*
 192          * do platform specific un-initialization:
 193          * release iomux pins, disable clock, etc.
 194          */
 195         if (pdata->exit)
 196                 pdata->exit(pdev);
 197         usb_put_hcd(hcd);
 198 }
 199
 200 static int ehci_fsl_setup_phy(struct usb_hcd *hcd,
 201                                enum fsl_usb2_phy_modes phy_mode,
 202                                unsigned int port_offset)
 203 {
 204         u32 portsc;
 205         struct ehci_hcd *ehci = hcd_to_ehci(hcd);
 206         void __iomem *non_ehci = hcd->regs;
 207         struct device *dev = hcd->self.controller;
 208         struct fsl_usb2_platform_data *pdata = dev_get_platdata(dev);
 209
 210         if (pdata->controller_ver < 0) {
 211                 dev_warn(hcd->self.controller, "Could not get controller version\n");
 212                 return -ENODEV;
 213         }
 214
 215         portsc = ehci_readl(ehci, &ehci->regs->port_status[port_offset]);
 216         portsc &= ~(PORT_PTS_MSK | PORT_PTS_PTW);
 217
 218         switch (phy_mode) {
 219         case FSL_USB2_PHY_ULPI:
 220                 if (pdata->have_sysif_regs && pdata->controller_ver) {
 221                         /* controller version 1.6 or above */
 222                         clrbits32(non_ehci + FSL_SOC_USB_CTRL, UTMI_PHY_EN);
 223                         setbits32(non_ehci + FSL_SOC_USB_CTRL,
 224                                 ULPI_PHY_CLK_SEL | USB_CTRL_USB_EN);
 225                 }
 226                 portsc |= PORT_PTS_ULPI;
 227                 break;
 228         case FSL_USB2_PHY_SERIAL:
 229                 portsc |= PORT_PTS_SERIAL;
 230                 break;
 231         case FSL_USB2_PHY_UTMI_WIDE:
 232                 portsc |= PORT_PTS_PTW;
 233                 /* fall through */
 234         case FSL_USB2_PHY_UTMI:
 235                 if (pdata->have_sysif_regs && pdata->controller_ver) {
 236                         /* controller version 1.6 or above */
 237                         setbits32(non_ehci + FSL_SOC_USB_CTRL, UTMI_PHY_EN);
 238                         mdelay(FSL_UTMI_PHY_DLY);  /* Delay for UTMI PHY CLK to
 239                                                 become stable - 10ms*/
 240                 }
 241                 /* enable UTMI PHY */
 242                 if (pdata->have_sysif_regs)
 243                         setbits32(non_ehci + FSL_SOC_USB_CTRL,
 244                                   CTRL_UTMI_PHY_EN);
 245                 portsc |= PORT_PTS_UTMI;
 246                 break;
 247         case FSL_USB2_PHY_NONE:
 248                 break;
 249         }
 250
 251         if (pdata->have_sysif_regs &&
 252             pdata->controller_ver > FSL_USB_VER_1_6 &&
 253             (phy_mode == FSL_USB2_PHY_ULPI)) {
 254                 /* check PHY_CLK_VALID to get phy clk valid */
 255                 if (!(spin_event_timeout(in_be32(non_ehci + FSL_SOC_USB_CTRL) &
 256                                 PHY_CLK_VALID, FSL_USB_PHY_CLK_TIMEOUT, 0) ||
 257                                 in_be32(non_ehci + FSL_SOC_USB_PRICTRL))) {
 258                         dev_warn(hcd->self.controller, "USB PHY clock invalid\n");
 259                         return -EINVAL;
 260                 }
 261         }
 262
 263         ehci_writel(ehci, portsc, &ehci->regs->port_status[port_offset]);
 264
 265         if (phy_mode != FSL_USB2_PHY_ULPI && pdata->have_sysif_regs)
 266                 setbits32(non_ehci + FSL_SOC_USB_CTRL, USB_CTRL_USB_EN);
 267
 268         return 0;
 269 }
 270
 271 static int ehci_fsl_usb_setup(struct ehci_hcd *ehci)
 272 {
 273         struct usb_hcd *hcd = ehci_to_hcd(ehci);
 274         struct fsl_usb2_platform_data *pdata;
 275         void __iomem *non_ehci = hcd->regs;
 276
 277         pdata = dev_get_platdata(hcd->self.controller);
 278
 279         if (pdata->have_sysif_regs) {
 280                 /*
 281                 * Turn on cache snooping hardware, since some PowerPC platforms
 282                 * wholly rely on hardware to deal with cache coherent
 283                 */
 284
 285                 /* Setup Snooping for all the 4GB space */
 286                 /* SNOOP1 starts from 0x0, size 2G */
 287                 out_be32(non_ehci + FSL_SOC_USB_SNOOP1, 0x0 | SNOOP_SIZE_2GB);
 288                 /* SNOOP2 starts from 0x80000000, size 2G */
 289                 out_be32(non_ehci + FSL_SOC_USB_SNOOP2, 0x80000000 | SNOOP_SIZE_2GB);
 290         }
 291
 292         if ((pdata->operating_mode == FSL_USB2_DR_HOST) ||
 293                         (pdata->operating_mode == FSL_USB2_DR_OTG))
 294                 if (ehci_fsl_setup_phy(hcd, pdata->phy_mode, 0))
 295                         return -EINVAL;
 296
 297         if (pdata->operating_mode == FSL_USB2_MPH_HOST) {
 298                 unsigned int chip, rev, svr;
 299
 300                 svr = mfspr(SPRN_SVR);
 301                 chip = svr >> 16;
 302                 rev = (svr >> 4) & 0xf;
 303
 304                 /* Deal with USB Erratum #14 on MPC834x Rev 1.0 & 1.1 chips */
 305                 if ((rev == 1) && (chip >= 0x8050) && (chip <= 0x8055))
 306                         ehci->has_fsl_port_bug = 1;
 307
 308                 if (pdata->port_enables & FSL_USB2_PORT0_ENABLED)
 309                         if (ehci_fsl_setup_phy(hcd, pdata->phy_mode, 0))
 310                                 return -EINVAL;
 311
 312                 if (pdata->port_enables & FSL_USB2_PORT1_ENABLED)
 313                         if (ehci_fsl_setup_phy(hcd, pdata->phy_mode, 1))
 314                                 return -EINVAL;
 315         }
 316
 317         if (pdata->have_sysif_regs) {
 318 #ifdef CONFIG_FSL_SOC_BOOKE
 319                 out_be32(non_ehci + FSL_SOC_USB_PRICTRL, 0x00000008);
 320                 out_be32(non_ehci + FSL_SOC_USB_AGECNTTHRSH, 0x00000080);
 321 #else
 322                 out_be32(non_ehci + FSL_SOC_USB_PRICTRL, 0x0000000c);
 323                 out_be32(non_ehci + FSL_SOC_USB_AGECNTTHRSH, 0x00000040);
 324 #endif
 325                 out_be32(non_ehci + FSL_SOC_USB_SICTRL, 0x00000001);
 326         }
 327
 328         return 0;
 329 }
 330
 331 /* called after powerup, by probe or system-pm "wakeup" */
 332 static int ehci_fsl_reinit(struct ehci_hcd *ehci)
 333 {
 334         if (ehci_fsl_usb_setup(ehci))
 335                 return -EINVAL;
 336
 337         return 0;
 338 }
 339
 340 /* called during probe() after chip reset completes */
 341 static int ehci_fsl_setup(struct usb_hcd *hcd)
 342 {
 343         struct ehci_hcd *ehci = hcd_to_ehci(hcd);
 344         int retval;
 345         struct fsl_usb2_platform_data *pdata;
 346         struct device *dev;
 347
 348         dev = hcd->self.controller;
 349         pdata = dev_get_platdata(hcd->self.controller);
 350         ehci->big_endian_desc = pdata->big_endian_desc;
 351         ehci->big_endian_mmio = pdata->big_endian_mmio;
 352
 353         /* EHCI registers start at offset 0x100 */
 354         ehci->caps = hcd->regs + 0x100;
 355
 356 #ifdef CONFIG_PPC_83xx
 357         /*
 358          * Deal with MPC834X that need port power to be cycled after the power
 359          * fault condition is removed. Otherwise the state machine does not
 360          * reflect PORTSC[CSC] correctly.
 361          */
 362         ehci->need_oc_pp_cycle = 1;
 363 #endif
 364
 365         hcd->has_tt = 1;
 366
 367         retval = ehci_setup(hcd);
 368         if (retval)
 369                 return retval;
 370
 371         if (of_device_is_compatible(dev->parent->of_node,
 372                                     "fsl,mpc5121-usb2-dr")) {
 373                 /*
 374                  * set SBUSCFG:AHBBRST so that control msgs don't
 375                  * fail when doing heavy PATA writes.
 376                  */
 377                 ehci_writel(ehci, SBUSCFG_INCR8,
 378                             hcd->regs + FSL_SOC_USB_SBUSCFG);
 379         }
 380
 381         retval = ehci_fsl_reinit(ehci);
 382         return retval;
 383 }
 384
 385 struct ehci_fsl {
 386         struct ehci_hcd ehci;
 387
 388 #ifdef CONFIG_PM
 389         /* Saved USB PHY settings, need to restore after deep sleep. */
 390         u32 usb_ctrl;
 391 #endif
 392 };
 393
 394 #ifdef CONFIG_PM
 395
 396 #ifdef CONFIG_PPC_MPC512x
 397 static int ehci_fsl_mpc512x_drv_suspend(struct device *dev)
 398 {
 399         struct usb_hcd *hcd = dev_get_drvdata(dev);
 400         struct ehci_hcd *ehci = hcd_to_ehci(hcd);
 401         struct fsl_usb2_platform_data *pdata = dev_get_platdata(dev);
 402         u32 tmp;
 403
 404 #ifdef CONFIG_DYNAMIC_DEBUG
 405         u32 mode = ehci_readl(ehci, hcd->regs + FSL_SOC_USB_USBMODE);
 406         mode &= USBMODE_CM_MASK;
 407         tmp = ehci_readl(ehci, hcd->regs + 0x140);      /* usbcmd */
 408
 409         dev_dbg(dev, "suspend=%d already_suspended=%d "
 410                 "mode=%d  usbcmd %08x\n", pdata->suspended,
 411                 pdata->already_suspended, mode, tmp);
 412 #endif
 413
 414         /*
 415          * If the controller is already suspended, then this must be a
 416          * PM suspend.  Remember this fact, so that we will leave the
 417          * controller suspended at PM resume time.
 418          */
 419         if (pdata->suspended) {
 420                 dev_dbg(dev, "already suspended, leaving early\n");
 421                 pdata->already_suspended = 1;
 422                 return 0;
 423         }
 424
 425         dev_dbg(dev, "suspending...\n");
 426
 427         ehci->rh_state = EHCI_RH_SUSPENDED;
 428         dev->power.power_state = PMSG_SUSPEND;
 429
 430         /* ignore non-host interrupts */
 431         clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
 432
 433         /* stop the controller */
 434         tmp = ehci_readl(ehci, &ehci->regs->command);
 435         tmp &= ~CMD_RUN;
 436         ehci_writel(ehci, tmp, &ehci->regs->command);
 437
 438         /* save EHCI registers */
 439         pdata->pm_command = ehci_readl(ehci, &ehci->regs->command);
 440         pdata->pm_command &= ~CMD_RUN;
 441         pdata->pm_status  = ehci_readl(ehci, &ehci->regs->status);
 442         pdata->pm_intr_enable  = ehci_readl(ehci, &ehci->regs->intr_enable);
 443         pdata->pm_frame_index  = ehci_readl(ehci, &ehci->regs->frame_index);
 444         pdata->pm_segment  = ehci_readl(ehci, &ehci->regs->segment);
 445         pdata->pm_frame_list  = ehci_readl(ehci, &ehci->regs->frame_list);
 446         pdata->pm_async_next  = ehci_readl(ehci, &ehci->regs->async_next);
 447         pdata->pm_configured_flag  =
 448                 ehci_readl(ehci, &ehci->regs->configured_flag);
 449         pdata->pm_portsc = ehci_readl(ehci, &ehci->regs->port_status[0]);
 450         pdata->pm_usbgenctrl = ehci_readl(ehci,
 451                                           hcd->regs + FSL_SOC_USB_USBGENCTRL);
 452
 453         /* clear the W1C bits */
 454         pdata->pm_portsc &= cpu_to_hc32(ehci, ~PORT_RWC_BITS);
 455
 456         pdata->suspended = 1;
 457
 458         /* clear PP to cut power to the port */
 459         tmp = ehci_readl(ehci, &ehci->regs->port_status[0]);
 460         tmp &= ~PORT_POWER;
 461         ehci_writel(ehci, tmp, &ehci->regs->port_status[0]);
 462
 463         return 0;
 464 }
 465
 466 static int ehci_fsl_mpc512x_drv_resume(struct device *dev)
 467 {
 468         struct usb_hcd *hcd = dev_get_drvdata(dev);
 469         struct ehci_hcd *ehci = hcd_to_ehci(hcd);
 470         struct fsl_usb2_platform_data *pdata = dev_get_platdata(dev);
 471         u32 tmp;
 472
 473         dev_dbg(dev, "suspend=%d already_suspended=%d\n",
 474                 pdata->suspended, pdata->already_suspended);
 475
 476         /*
 477          * If the controller was already suspended at suspend time,
 478          * then don't resume it now.
 479          */
 480         if (pdata->already_suspended) {
 481                 dev_dbg(dev, "already suspended, leaving early\n");
 482                 pdata->already_suspended = 0;
 483                 return 0;
 484         }
 485
 486         if (!pdata->suspended) {
 487                 dev_dbg(dev, "not suspended, leaving early\n");
 488                 return 0;
 489         }
 490
 491         pdata->suspended = 0;
 492
 493         dev_dbg(dev, "resuming...\n");
 494
 495         /* set host mode */
 496         tmp = USBMODE_CM_HOST | (pdata->es ? USBMODE_ES : 0);
 497         ehci_writel(ehci, tmp, hcd->regs + FSL_SOC_USB_USBMODE);
 498
 499         ehci_writel(ehci, pdata->pm_usbgenctrl,
 500                     hcd->regs + FSL_SOC_USB_USBGENCTRL);
 501         ehci_writel(ehci, ISIPHYCTRL_PXE | ISIPHYCTRL_PHYE,
 502                     hcd->regs + FSL_SOC_USB_ISIPHYCTRL);
 503
 504         ehci_writel(ehci, SBUSCFG_INCR8, hcd->regs + FSL_SOC_USB_SBUSCFG);
 505
 506         /* restore EHCI registers */
 507         ehci_writel(ehci, pdata->pm_command, &ehci->regs->command);
 508         ehci_writel(ehci, pdata->pm_intr_enable, &ehci->regs->intr_enable);
 509         ehci_writel(ehci, pdata->pm_frame_index, &ehci->regs->frame_index);
 510         ehci_writel(ehci, pdata->pm_segment, &ehci->regs->segment);
 511         ehci_writel(ehci, pdata->pm_frame_list, &ehci->regs->frame_list);
 512         ehci_writel(ehci, pdata->pm_async_next, &ehci->regs->async_next);
 513         ehci_writel(ehci, pdata->pm_configured_flag,
 514                     &ehci->regs->configured_flag);
 515         ehci_writel(ehci, pdata->pm_portsc, &ehci->regs->port_status[0]);
 516
 517         set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
 518         ehci->rh_state = EHCI_RH_RUNNING;
 519         dev->power.power_state = PMSG_ON;
 520
 521         tmp = ehci_readl(ehci, &ehci->regs->command);
 522         tmp |= CMD_RUN;
 523         ehci_writel(ehci, tmp, &ehci->regs->command);
 524
 525         usb_hcd_resume_root_hub(hcd);
 526
 527         return 0;
 528 }
 529 #else
 530 static inline int ehci_fsl_mpc512x_drv_suspend(struct device *dev)
 531 {
 532         return 0;
 533 }
 534
 535 static inline int ehci_fsl_mpc512x_drv_resume(struct device *dev)
 536 {
 537         return 0;
 538 }
 539 #endif /* CONFIG_PPC_MPC512x */
 540
 541 static struct ehci_fsl *hcd_to_ehci_fsl(struct usb_hcd *hcd)
 542 {
 543         struct ehci_hcd *ehci = hcd_to_ehci(hcd);
 544
 545         return container_of(ehci, struct ehci_fsl, ehci);
 546 }
 547
 548 static int ehci_fsl_drv_suspend(struct device *dev)
 549 {
 550         struct usb_hcd *hcd = dev_get_drvdata(dev);
 551         struct ehci_fsl *ehci_fsl = hcd_to_ehci_fsl(hcd);
 552         void __iomem *non_ehci = hcd->regs;
 553
 554         if (of_device_is_compatible(dev->parent->of_node,
 555                                     "fsl,mpc5121-usb2-dr")) {
 556                 return ehci_fsl_mpc512x_drv_suspend(dev);
 557         }
 558
 559         ehci_prepare_ports_for_controller_suspend(hcd_to_ehci(hcd),
 560                         device_may_wakeup(dev));
 561         if (!fsl_deep_sleep())
 562                 return 0;
 563
 564         ehci_fsl->usb_ctrl = in_be32(non_ehci + FSL_SOC_USB_CTRL);
 565         return 0;
 566 }
 567
 568 static int ehci_fsl_drv_resume(struct device *dev)
 569 {
 570         struct usb_hcd *hcd = dev_get_drvdata(dev);
 571         struct ehci_fsl *ehci_fsl = hcd_to_ehci_fsl(hcd);
 572         struct ehci_hcd *ehci = hcd_to_ehci(hcd);
 573         void __iomem *non_ehci = hcd->regs;
 574
 575         if (of_device_is_compatible(dev->parent->of_node,
 576                                     "fsl,mpc5121-usb2-dr")) {
 577                 return ehci_fsl_mpc512x_drv_resume(dev);
 578         }
 579
 580         ehci_prepare_ports_for_controller_resume(ehci);
 581         if (!fsl_deep_sleep())
 582                 return 0;
 583
 584         usb_root_hub_lost_power(hcd->self.root_hub);
 585
 586         /* Restore USB PHY settings and enable the controller. */
 587         out_be32(non_ehci + FSL_SOC_USB_CTRL, ehci_fsl->usb_ctrl);
 588
 589         ehci_reset(ehci);
 590         ehci_fsl_reinit(ehci);
 591
 592         return 0;
 593 }
 594
 595 static int ehci_fsl_drv_restore(struct device *dev)
 596 {
 597         struct usb_hcd *hcd = dev_get_drvdata(dev);
 598
 599         usb_root_hub_lost_power(hcd->self.root_hub);
 600         return 0;
 601 }
 602
 603 static struct dev_pm_ops ehci_fsl_pm_ops = {
 604         .suspend = ehci_fsl_drv_suspend,
 605         .resume = ehci_fsl_drv_resume,
 606         .restore = ehci_fsl_drv_restore,
 607 };
 608
 609 #define EHCI_FSL_PM_OPS         (&ehci_fsl_pm_ops)
 610 #else
 611 #define EHCI_FSL_PM_OPS         NULL
 612 #endif /* CONFIG_PM */
 613
 614 #ifdef CONFIG_USB_OTG
 615 static int ehci_start_port_reset(struct usb_hcd *hcd, unsigned port)
 616 {
 617         struct ehci_hcd *ehci = hcd_to_ehci(hcd);
 618         u32 status;
 619
 620         if (!port)
 621                 return -EINVAL;
 622
 623         port--;
 624
 625         /* start port reset before HNP protocol time out */
 626         status = readl(&ehci->regs->port_status[port]);
 627         if (!(status & PORT_CONNECT))
 628                 return -ENODEV;
 629
 630         /* khubd will finish the reset later */
 631         if (ehci_is_TDI(ehci)) {
 632                 writel(PORT_RESET |
 633                        (status & ~(PORT_CSC | PORT_PEC | PORT_OCC)),
 634                        &ehci->regs->port_status[port]);
 635         } else {
 636                 writel(PORT_RESET, &ehci->regs->port_status[port]);
 637         }
 638
 639         return 0;
 640 }
 641 #else
 642 #define ehci_start_port_reset   NULL
 643 #endif /* CONFIG_USB_OTG */
 644
 645
 646 static const struct hc_driver ehci_fsl_hc_driver = {
 647         .description = hcd_name,
 648         .product_desc = "Freescale On-Chip EHCI Host Controller",
 649         .hcd_priv_size = sizeof(struct ehci_fsl),
 650
 651         /*
 652          * generic hardware linkage
 653          */
 654         .irq = ehci_irq,
 655         .flags = HCD_USB2 | HCD_MEMORY | HCD_BH,
 656
 657         /*
 658          * basic lifecycle operations
 659          */
 660         .reset = ehci_fsl_setup,
 661         .start = ehci_run,
 662         .stop = ehci_stop,
 663         .shutdown = ehci_shutdown,
 664
 665         /*
 666          * managing i/o requests and associated device resources
 667          */
 668         .urb_enqueue = ehci_urb_enqueue,
 669         .urb_dequeue = ehci_urb_dequeue,
 670         .endpoint_disable = ehci_endpoint_disable,
 671         .endpoint_reset = ehci_endpoint_reset,
 672
 673         /*
 674          * scheduling support
 675          */
 676         .get_frame_number = ehci_get_frame,
 677
 678         /*
 679          * root hub support
 680          */
 681         .hub_status_data = ehci_hub_status_data,
 682         .hub_control = ehci_hub_control,
 683         .bus_suspend = ehci_bus_suspend,
 684         .bus_resume = ehci_bus_resume,
 685         .start_port_reset = ehci_start_port_reset,
 686         .relinquish_port = ehci_relinquish_port,
 687         .port_handed_over = ehci_port_handed_over,
 688
 689         .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete,
 690 };
 691
 692 static int ehci_fsl_drv_probe(struct platform_device *pdev)
 693 {
 694         if (usb_disabled())
 695                 return -ENODEV;
 696
 697         /* FIXME we only want one one probe() not two */
 698         return usb_hcd_fsl_probe(&ehci_fsl_hc_driver, pdev);
 699 }
 700
 701 static int ehci_fsl_drv_remove(struct platform_device *pdev)
 702 {
 703         struct usb_hcd *hcd = platform_get_drvdata(pdev);
 704
 705         /* FIXME we only want one one remove() not two */
 706         usb_hcd_fsl_remove(hcd, pdev);
 707         return 0;
 708 }
 709
 710 MODULE_ALIAS("platform:fsl-ehci");
 711
 712 static struct platform_driver ehci_fsl_driver = {
 713         .probe = ehci_fsl_drv_probe,
 714         .remove = ehci_fsl_drv_remove,
 715         .shutdown = usb_hcd_platform_shutdown,
 716         .driver = {
 717                 .name = "fsl-ehci",
 718                 .owner  = THIS_MODULE,
 719                 .pm = EHCI_FSL_PM_OPS,
 720         },
 721 };