Merge branch 'fix' of git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6
[deliverable/linux.git] / drivers / usb / host / ehci.h
1 /*
2 * Copyright (c) 2001-2002 by David Brownell
3 *
4 * This program is free software; you can redistribute it and/or modify it
5 * under the terms of the GNU General Public License as published by the
6 * Free Software Foundation; either version 2 of the License, or (at your
7 * option) any later version.
8 *
9 * This program is distributed in the hope that it will be useful, but
10 * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
11 * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
12 * for more details.
13 *
14 * You should have received a copy of the GNU General Public License
15 * along with this program; if not, write to the Free Software Foundation,
16 * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
17 */
18
19 #ifndef __LINUX_EHCI_HCD_H
20 #define __LINUX_EHCI_HCD_H
21
22 /* definitions used for the EHCI driver */
23
24 /*
25 * __hc32 and __hc16 are "Host Controller" types, they may be equivalent to
26 * __leXX (normally) or __beXX (given EHCI_BIG_ENDIAN_DESC), depending on
27 * the host controller implementation.
28 *
29 * To facilitate the strongest possible byte-order checking from "sparse"
30 * and so on, we use __leXX unless that's not practical.
31 */
32 #ifdef CONFIG_USB_EHCI_BIG_ENDIAN_DESC
33 typedef __u32 __bitwise __hc32;
34 typedef __u16 __bitwise __hc16;
35 #else
36 #define __hc32 __le32
37 #define __hc16 __le16
38 #endif
39
40 /* statistics can be kept for tuning/monitoring */
41 struct ehci_stats {
42 /* irq usage */
43 unsigned long normal;
44 unsigned long error;
45 unsigned long reclaim;
46 unsigned long lost_iaa;
47
48 /* termination of urbs from core */
49 unsigned long complete;
50 unsigned long unlink;
51 };
52
53 /* ehci_hcd->lock guards shared data against other CPUs:
54 * ehci_hcd: async, reclaim, periodic (and shadow), ...
55 * usb_host_endpoint: hcpriv
56 * ehci_qh: qh_next, qtd_list
57 * ehci_qtd: qtd_list
58 *
59 * Also, hold this lock when talking to HC registers or
60 * when updating hw_* fields in shared qh/qtd/... structures.
61 */
62
63 #define EHCI_MAX_ROOT_PORTS 15 /* see HCS_N_PORTS */
64
65 struct ehci_hcd { /* one per controller */
66 /* glue to PCI and HCD framework */
67 struct ehci_caps __iomem *caps;
68 struct ehci_regs __iomem *regs;
69 struct ehci_dbg_port __iomem *debug;
70
71 __u32 hcs_params; /* cached register copy */
72 spinlock_t lock;
73
74 /* async schedule support */
75 struct ehci_qh *async;
76 struct ehci_qh *reclaim;
77 unsigned scanning : 1;
78
79 /* periodic schedule support */
80 #define DEFAULT_I_TDPS 1024 /* some HCs can do less */
81 unsigned periodic_size;
82 __hc32 *periodic; /* hw periodic table */
83 dma_addr_t periodic_dma;
84 unsigned i_thresh; /* uframes HC might cache */
85
86 union ehci_shadow *pshadow; /* mirror hw periodic table */
87 int next_uframe; /* scan periodic, start here */
88 unsigned periodic_sched; /* periodic activity count */
89
90 /* list of itds completed while clock_frame was still active */
91 struct list_head cached_itd_list;
92 unsigned clock_frame;
93
94 /* per root hub port */
95 unsigned long reset_done [EHCI_MAX_ROOT_PORTS];
96
97 /* bit vectors (one bit per port) */
98 unsigned long bus_suspended; /* which ports were
99 already suspended at the start of a bus suspend */
100 unsigned long companion_ports; /* which ports are
101 dedicated to the companion controller */
102 unsigned long owned_ports; /* which ports are
103 owned by the companion during a bus suspend */
104 unsigned long port_c_suspend; /* which ports have
105 the change-suspend feature turned on */
106 unsigned long suspended_ports; /* which ports are
107 suspended */
108
109 /* per-HC memory pools (could be per-bus, but ...) */
110 struct dma_pool *qh_pool; /* qh per active urb */
111 struct dma_pool *qtd_pool; /* one or more per qh */
112 struct dma_pool *itd_pool; /* itd per iso urb */
113 struct dma_pool *sitd_pool; /* sitd per split iso urb */
114
115 struct timer_list iaa_watchdog;
116 struct timer_list watchdog;
117 unsigned long actions;
118 unsigned stamp;
119 unsigned random_frame;
120 unsigned long next_statechange;
121 ktime_t last_periodic_enable;
122 u32 command;
123
124 /* SILICON QUIRKS */
125 unsigned no_selective_suspend:1;
126 unsigned has_fsl_port_bug:1; /* FreeScale */
127 unsigned big_endian_mmio:1;
128 unsigned big_endian_desc:1;
129 unsigned has_amcc_usb23:1;
130 unsigned need_io_watchdog:1;
131 unsigned broken_periodic:1;
132
133 /* required for usb32 quirk */
134 #define OHCI_CTRL_HCFS (3 << 6)
135 #define OHCI_USB_OPER (2 << 6)
136 #define OHCI_USB_SUSPEND (3 << 6)
137
138 #define OHCI_HCCTRL_OFFSET 0x4
139 #define OHCI_HCCTRL_LEN 0x4
140 __hc32 *ohci_hcctrl_reg;
141 unsigned has_hostpc:1;
142
143 u8 sbrn; /* packed release number */
144
145 /* irq statistics */
146 #ifdef EHCI_STATS
147 struct ehci_stats stats;
148 # define COUNT(x) do { (x)++; } while (0)
149 #else
150 # define COUNT(x) do {} while (0)
151 #endif
152
153 /* debug files */
154 #ifdef DEBUG
155 struct dentry *debug_dir;
156 struct dentry *debug_async;
157 struct dentry *debug_periodic;
158 struct dentry *debug_registers;
159 #endif
160 };
161
162 /* convert between an HCD pointer and the corresponding EHCI_HCD */
163 static inline struct ehci_hcd *hcd_to_ehci (struct usb_hcd *hcd)
164 {
165 return (struct ehci_hcd *) (hcd->hcd_priv);
166 }
167 static inline struct usb_hcd *ehci_to_hcd (struct ehci_hcd *ehci)
168 {
169 return container_of ((void *) ehci, struct usb_hcd, hcd_priv);
170 }
171
172
173 static inline void
174 iaa_watchdog_start(struct ehci_hcd *ehci)
175 {
176 WARN_ON(timer_pending(&ehci->iaa_watchdog));
177 mod_timer(&ehci->iaa_watchdog,
178 jiffies + msecs_to_jiffies(EHCI_IAA_MSECS));
179 }
180
181 static inline void iaa_watchdog_done(struct ehci_hcd *ehci)
182 {
183 del_timer(&ehci->iaa_watchdog);
184 }
185
186 enum ehci_timer_action {
187 TIMER_IO_WATCHDOG,
188 TIMER_ASYNC_SHRINK,
189 TIMER_ASYNC_OFF,
190 };
191
192 static inline void
193 timer_action_done (struct ehci_hcd *ehci, enum ehci_timer_action action)
194 {
195 clear_bit (action, &ehci->actions);
196 }
197
198 static void free_cached_itd_list(struct ehci_hcd *ehci);
199
200 /*-------------------------------------------------------------------------*/
201
202 #include <linux/usb/ehci_def.h>
203
204 /*-------------------------------------------------------------------------*/
205
206 #define QTD_NEXT(ehci, dma) cpu_to_hc32(ehci, (u32)dma)
207
208 /*
209 * EHCI Specification 0.95 Section 3.5
210 * QTD: describe data transfer components (buffer, direction, ...)
211 * See Fig 3-6 "Queue Element Transfer Descriptor Block Diagram".
212 *
213 * These are associated only with "QH" (Queue Head) structures,
214 * used with control, bulk, and interrupt transfers.
215 */
216 struct ehci_qtd {
217 /* first part defined by EHCI spec */
218 __hc32 hw_next; /* see EHCI 3.5.1 */
219 __hc32 hw_alt_next; /* see EHCI 3.5.2 */
220 __hc32 hw_token; /* see EHCI 3.5.3 */
221 #define QTD_TOGGLE (1 << 31) /* data toggle */
222 #define QTD_LENGTH(tok) (((tok)>>16) & 0x7fff)
223 #define QTD_IOC (1 << 15) /* interrupt on complete */
224 #define QTD_CERR(tok) (((tok)>>10) & 0x3)
225 #define QTD_PID(tok) (((tok)>>8) & 0x3)
226 #define QTD_STS_ACTIVE (1 << 7) /* HC may execute this */
227 #define QTD_STS_HALT (1 << 6) /* halted on error */
228 #define QTD_STS_DBE (1 << 5) /* data buffer error (in HC) */
229 #define QTD_STS_BABBLE (1 << 4) /* device was babbling (qtd halted) */
230 #define QTD_STS_XACT (1 << 3) /* device gave illegal response */
231 #define QTD_STS_MMF (1 << 2) /* incomplete split transaction */
232 #define QTD_STS_STS (1 << 1) /* split transaction state */
233 #define QTD_STS_PING (1 << 0) /* issue PING? */
234
235 #define ACTIVE_BIT(ehci) cpu_to_hc32(ehci, QTD_STS_ACTIVE)
236 #define HALT_BIT(ehci) cpu_to_hc32(ehci, QTD_STS_HALT)
237 #define STATUS_BIT(ehci) cpu_to_hc32(ehci, QTD_STS_STS)
238
239 __hc32 hw_buf [5]; /* see EHCI 3.5.4 */
240 __hc32 hw_buf_hi [5]; /* Appendix B */
241
242 /* the rest is HCD-private */
243 dma_addr_t qtd_dma; /* qtd address */
244 struct list_head qtd_list; /* sw qtd list */
245 struct urb *urb; /* qtd's urb */
246 size_t length; /* length of buffer */
247 } __attribute__ ((aligned (32)));
248
249 /* mask NakCnt+T in qh->hw_alt_next */
250 #define QTD_MASK(ehci) cpu_to_hc32 (ehci, ~0x1f)
251
252 #define IS_SHORT_READ(token) (QTD_LENGTH (token) != 0 && QTD_PID (token) == 1)
253
254 /*-------------------------------------------------------------------------*/
255
256 /* type tag from {qh,itd,sitd,fstn}->hw_next */
257 #define Q_NEXT_TYPE(ehci,dma) ((dma) & cpu_to_hc32(ehci, 3 << 1))
258
259 /*
260 * Now the following defines are not converted using the
261 * cpu_to_le32() macro anymore, since we have to support
262 * "dynamic" switching between be and le support, so that the driver
263 * can be used on one system with SoC EHCI controller using big-endian
264 * descriptors as well as a normal little-endian PCI EHCI controller.
265 */
266 /* values for that type tag */
267 #define Q_TYPE_ITD (0 << 1)
268 #define Q_TYPE_QH (1 << 1)
269 #define Q_TYPE_SITD (2 << 1)
270 #define Q_TYPE_FSTN (3 << 1)
271
272 /* next async queue entry, or pointer to interrupt/periodic QH */
273 #define QH_NEXT(ehci,dma) (cpu_to_hc32(ehci, (((u32)dma)&~0x01f)|Q_TYPE_QH))
274
275 /* for periodic/async schedules and qtd lists, mark end of list */
276 #define EHCI_LIST_END(ehci) cpu_to_hc32(ehci, 1) /* "null pointer" to hw */
277
278 /*
279 * Entries in periodic shadow table are pointers to one of four kinds
280 * of data structure. That's dictated by the hardware; a type tag is
281 * encoded in the low bits of the hardware's periodic schedule. Use
282 * Q_NEXT_TYPE to get the tag.
283 *
284 * For entries in the async schedule, the type tag always says "qh".
285 */
286 union ehci_shadow {
287 struct ehci_qh *qh; /* Q_TYPE_QH */
288 struct ehci_itd *itd; /* Q_TYPE_ITD */
289 struct ehci_sitd *sitd; /* Q_TYPE_SITD */
290 struct ehci_fstn *fstn; /* Q_TYPE_FSTN */
291 __hc32 *hw_next; /* (all types) */
292 void *ptr;
293 };
294
295 /*-------------------------------------------------------------------------*/
296
297 /*
298 * EHCI Specification 0.95 Section 3.6
299 * QH: describes control/bulk/interrupt endpoints
300 * See Fig 3-7 "Queue Head Structure Layout".
301 *
302 * These appear in both the async and (for interrupt) periodic schedules.
303 */
304
305 /* first part defined by EHCI spec */
306 struct ehci_qh_hw {
307 __hc32 hw_next; /* see EHCI 3.6.1 */
308 __hc32 hw_info1; /* see EHCI 3.6.2 */
309 #define QH_HEAD 0x00008000
310 __hc32 hw_info2; /* see EHCI 3.6.2 */
311 #define QH_SMASK 0x000000ff
312 #define QH_CMASK 0x0000ff00
313 #define QH_HUBADDR 0x007f0000
314 #define QH_HUBPORT 0x3f800000
315 #define QH_MULT 0xc0000000
316 __hc32 hw_current; /* qtd list - see EHCI 3.6.4 */
317
318 /* qtd overlay (hardware parts of a struct ehci_qtd) */
319 __hc32 hw_qtd_next;
320 __hc32 hw_alt_next;
321 __hc32 hw_token;
322 __hc32 hw_buf [5];
323 __hc32 hw_buf_hi [5];
324 } __attribute__ ((aligned(32)));
325
326 struct ehci_qh {
327 struct ehci_qh_hw *hw;
328 /* the rest is HCD-private */
329 dma_addr_t qh_dma; /* address of qh */
330 union ehci_shadow qh_next; /* ptr to qh; or periodic */
331 struct list_head qtd_list; /* sw qtd list */
332 struct ehci_qtd *dummy;
333 struct ehci_qh *reclaim; /* next to reclaim */
334
335 struct ehci_hcd *ehci;
336
337 /*
338 * Do NOT use atomic operations for QH refcounting. On some CPUs
339 * (PPC7448 for example), atomic operations cannot be performed on
340 * memory that is cache-inhibited (i.e. being used for DMA).
341 * Spinlocks are used to protect all QH fields.
342 */
343 u32 refcount;
344 unsigned stamp;
345
346 u8 needs_rescan; /* Dequeue during giveback */
347 u8 qh_state;
348 #define QH_STATE_LINKED 1 /* HC sees this */
349 #define QH_STATE_UNLINK 2 /* HC may still see this */
350 #define QH_STATE_IDLE 3 /* HC doesn't see this */
351 #define QH_STATE_UNLINK_WAIT 4 /* LINKED and on reclaim q */
352 #define QH_STATE_COMPLETING 5 /* don't touch token.HALT */
353
354 u8 xacterrs; /* XactErr retry counter */
355 #define QH_XACTERR_MAX 32 /* XactErr retry limit */
356
357 /* periodic schedule info */
358 u8 usecs; /* intr bandwidth */
359 u8 gap_uf; /* uframes split/csplit gap */
360 u8 c_usecs; /* ... split completion bw */
361 u16 tt_usecs; /* tt downstream bandwidth */
362 unsigned short period; /* polling interval */
363 unsigned short start; /* where polling starts */
364 #define NO_FRAME ((unsigned short)~0) /* pick new start */
365
366 struct usb_device *dev; /* access to TT */
367 unsigned clearing_tt:1; /* Clear-TT-Buf in progress */
368 };
369
370 /*-------------------------------------------------------------------------*/
371
372 /* description of one iso transaction (up to 3 KB data if highspeed) */
373 struct ehci_iso_packet {
374 /* These will be copied to iTD when scheduling */
375 u64 bufp; /* itd->hw_bufp{,_hi}[pg] |= */
376 __hc32 transaction; /* itd->hw_transaction[i] |= */
377 u8 cross; /* buf crosses pages */
378 /* for full speed OUT splits */
379 u32 buf1;
380 };
381
382 /* temporary schedule data for packets from iso urbs (both speeds)
383 * each packet is one logical usb transaction to the device (not TT),
384 * beginning at stream->next_uframe
385 */
386 struct ehci_iso_sched {
387 struct list_head td_list;
388 unsigned span;
389 struct ehci_iso_packet packet [0];
390 };
391
392 /*
393 * ehci_iso_stream - groups all (s)itds for this endpoint.
394 * acts like a qh would, if EHCI had them for ISO.
395 */
396 struct ehci_iso_stream {
397 /* first two fields match QH, but info1 == 0 */
398 __hc32 hw_next;
399 __hc32 hw_info1;
400
401 u32 refcount;
402 u8 bEndpointAddress;
403 u8 highspeed;
404 u16 depth; /* depth in uframes */
405 struct list_head td_list; /* queued itds/sitds */
406 struct list_head free_list; /* list of unused itds/sitds */
407 struct usb_device *udev;
408 struct usb_host_endpoint *ep;
409
410 /* output of (re)scheduling */
411 unsigned long start; /* jiffies */
412 unsigned long rescheduled;
413 int next_uframe;
414 __hc32 splits;
415
416 /* the rest is derived from the endpoint descriptor,
417 * trusting urb->interval == f(epdesc->bInterval) and
418 * including the extra info for hw_bufp[0..2]
419 */
420 u8 usecs, c_usecs;
421 u16 interval;
422 u16 tt_usecs;
423 u16 maxp;
424 u16 raw_mask;
425 unsigned bandwidth;
426
427 /* This is used to initialize iTD's hw_bufp fields */
428 __hc32 buf0;
429 __hc32 buf1;
430 __hc32 buf2;
431
432 /* this is used to initialize sITD's tt info */
433 __hc32 address;
434 };
435
436 /*-------------------------------------------------------------------------*/
437
438 /*
439 * EHCI Specification 0.95 Section 3.3
440 * Fig 3-4 "Isochronous Transaction Descriptor (iTD)"
441 *
442 * Schedule records for high speed iso xfers
443 */
444 struct ehci_itd {
445 /* first part defined by EHCI spec */
446 __hc32 hw_next; /* see EHCI 3.3.1 */
447 __hc32 hw_transaction [8]; /* see EHCI 3.3.2 */
448 #define EHCI_ISOC_ACTIVE (1<<31) /* activate transfer this slot */
449 #define EHCI_ISOC_BUF_ERR (1<<30) /* Data buffer error */
450 #define EHCI_ISOC_BABBLE (1<<29) /* babble detected */
451 #define EHCI_ISOC_XACTERR (1<<28) /* XactErr - transaction error */
452 #define EHCI_ITD_LENGTH(tok) (((tok)>>16) & 0x0fff)
453 #define EHCI_ITD_IOC (1 << 15) /* interrupt on complete */
454
455 #define ITD_ACTIVE(ehci) cpu_to_hc32(ehci, EHCI_ISOC_ACTIVE)
456
457 __hc32 hw_bufp [7]; /* see EHCI 3.3.3 */
458 __hc32 hw_bufp_hi [7]; /* Appendix B */
459
460 /* the rest is HCD-private */
461 dma_addr_t itd_dma; /* for this itd */
462 union ehci_shadow itd_next; /* ptr to periodic q entry */
463
464 struct urb *urb;
465 struct ehci_iso_stream *stream; /* endpoint's queue */
466 struct list_head itd_list; /* list of stream's itds */
467
468 /* any/all hw_transactions here may be used by that urb */
469 unsigned frame; /* where scheduled */
470 unsigned pg;
471 unsigned index[8]; /* in urb->iso_frame_desc */
472 } __attribute__ ((aligned (32)));
473
474 /*-------------------------------------------------------------------------*/
475
476 /*
477 * EHCI Specification 0.95 Section 3.4
478 * siTD, aka split-transaction isochronous Transfer Descriptor
479 * ... describe full speed iso xfers through TT in hubs
480 * see Figure 3-5 "Split-transaction Isochronous Transaction Descriptor (siTD)
481 */
482 struct ehci_sitd {
483 /* first part defined by EHCI spec */
484 __hc32 hw_next;
485 /* uses bit field macros above - see EHCI 0.95 Table 3-8 */
486 __hc32 hw_fullspeed_ep; /* EHCI table 3-9 */
487 __hc32 hw_uframe; /* EHCI table 3-10 */
488 __hc32 hw_results; /* EHCI table 3-11 */
489 #define SITD_IOC (1 << 31) /* interrupt on completion */
490 #define SITD_PAGE (1 << 30) /* buffer 0/1 */
491 #define SITD_LENGTH(x) (0x3ff & ((x)>>16))
492 #define SITD_STS_ACTIVE (1 << 7) /* HC may execute this */
493 #define SITD_STS_ERR (1 << 6) /* error from TT */
494 #define SITD_STS_DBE (1 << 5) /* data buffer error (in HC) */
495 #define SITD_STS_BABBLE (1 << 4) /* device was babbling */
496 #define SITD_STS_XACT (1 << 3) /* illegal IN response */
497 #define SITD_STS_MMF (1 << 2) /* incomplete split transaction */
498 #define SITD_STS_STS (1 << 1) /* split transaction state */
499
500 #define SITD_ACTIVE(ehci) cpu_to_hc32(ehci, SITD_STS_ACTIVE)
501
502 __hc32 hw_buf [2]; /* EHCI table 3-12 */
503 __hc32 hw_backpointer; /* EHCI table 3-13 */
504 __hc32 hw_buf_hi [2]; /* Appendix B */
505
506 /* the rest is HCD-private */
507 dma_addr_t sitd_dma;
508 union ehci_shadow sitd_next; /* ptr to periodic q entry */
509
510 struct urb *urb;
511 struct ehci_iso_stream *stream; /* endpoint's queue */
512 struct list_head sitd_list; /* list of stream's sitds */
513 unsigned frame;
514 unsigned index;
515 } __attribute__ ((aligned (32)));
516
517 /*-------------------------------------------------------------------------*/
518
519 /*
520 * EHCI Specification 0.96 Section 3.7
521 * Periodic Frame Span Traversal Node (FSTN)
522 *
523 * Manages split interrupt transactions (using TT) that span frame boundaries
524 * into uframes 0/1; see 4.12.2.2. In those uframes, a "save place" FSTN
525 * makes the HC jump (back) to a QH to scan for fs/ls QH completions until
526 * it hits a "restore" FSTN; then it returns to finish other uframe 0/1 work.
527 */
528 struct ehci_fstn {
529 __hc32 hw_next; /* any periodic q entry */
530 __hc32 hw_prev; /* qh or EHCI_LIST_END */
531
532 /* the rest is HCD-private */
533 dma_addr_t fstn_dma;
534 union ehci_shadow fstn_next; /* ptr to periodic q entry */
535 } __attribute__ ((aligned (32)));
536
537 /*-------------------------------------------------------------------------*/
538
539 #ifdef CONFIG_USB_EHCI_ROOT_HUB_TT
540
541 /*
542 * Some EHCI controllers have a Transaction Translator built into the
543 * root hub. This is a non-standard feature. Each controller will need
544 * to add code to the following inline functions, and call them as
545 * needed (mostly in root hub code).
546 */
547
548 #define ehci_is_TDI(e) (ehci_to_hcd(e)->has_tt)
549
550 /* Returns the speed of a device attached to a port on the root hub. */
551 static inline unsigned int
552 ehci_port_speed(struct ehci_hcd *ehci, unsigned int portsc)
553 {
554 if (ehci_is_TDI(ehci)) {
555 switch ((portsc >> (ehci->has_hostpc ? 25 : 26)) & 3) {
556 case 0:
557 return 0;
558 case 1:
559 return (1<<USB_PORT_FEAT_LOWSPEED);
560 case 2:
561 default:
562 return (1<<USB_PORT_FEAT_HIGHSPEED);
563 }
564 }
565 return (1<<USB_PORT_FEAT_HIGHSPEED);
566 }
567
568 #else
569
570 #define ehci_is_TDI(e) (0)
571
572 #define ehci_port_speed(ehci, portsc) (1<<USB_PORT_FEAT_HIGHSPEED)
573 #endif
574
575 /*-------------------------------------------------------------------------*/
576
577 #ifdef CONFIG_PPC_83xx
578 /* Some Freescale processors have an erratum in which the TT
579 * port number in the queue head was 0..N-1 instead of 1..N.
580 */
581 #define ehci_has_fsl_portno_bug(e) ((e)->has_fsl_port_bug)
582 #else
583 #define ehci_has_fsl_portno_bug(e) (0)
584 #endif
585
586 /*
587 * While most USB host controllers implement their registers in
588 * little-endian format, a minority (celleb companion chip) implement
589 * them in big endian format.
590 *
591 * This attempts to support either format at compile time without a
592 * runtime penalty, or both formats with the additional overhead
593 * of checking a flag bit.
594 */
595
596 #ifdef CONFIG_USB_EHCI_BIG_ENDIAN_MMIO
597 #define ehci_big_endian_mmio(e) ((e)->big_endian_mmio)
598 #else
599 #define ehci_big_endian_mmio(e) 0
600 #endif
601
602 /*
603 * Big-endian read/write functions are arch-specific.
604 * Other arches can be added if/when they're needed.
605 */
606 #if defined(CONFIG_ARM) && defined(CONFIG_ARCH_IXP4XX)
607 #define readl_be(addr) __raw_readl((__force unsigned *)addr)
608 #define writel_be(val, addr) __raw_writel(val, (__force unsigned *)addr)
609 #endif
610
611 static inline unsigned int ehci_readl(const struct ehci_hcd *ehci,
612 __u32 __iomem * regs)
613 {
614 #ifdef CONFIG_USB_EHCI_BIG_ENDIAN_MMIO
615 return ehci_big_endian_mmio(ehci) ?
616 readl_be(regs) :
617 readl(regs);
618 #else
619 return readl(regs);
620 #endif
621 }
622
623 static inline void ehci_writel(const struct ehci_hcd *ehci,
624 const unsigned int val, __u32 __iomem *regs)
625 {
626 #ifdef CONFIG_USB_EHCI_BIG_ENDIAN_MMIO
627 ehci_big_endian_mmio(ehci) ?
628 writel_be(val, regs) :
629 writel(val, regs);
630 #else
631 writel(val, regs);
632 #endif
633 }
634
635 /*
636 * On certain ppc-44x SoC there is a HW issue, that could only worked around with
637 * explicit suspend/operate of OHCI. This function hereby makes sense only on that arch.
638 * Other common bits are dependant on has_amcc_usb23 quirk flag.
639 */
640 #ifdef CONFIG_44x
641 static inline void set_ohci_hcfs(struct ehci_hcd *ehci, int operational)
642 {
643 u32 hc_control;
644
645 hc_control = (readl_be(ehci->ohci_hcctrl_reg) & ~OHCI_CTRL_HCFS);
646 if (operational)
647 hc_control |= OHCI_USB_OPER;
648 else
649 hc_control |= OHCI_USB_SUSPEND;
650
651 writel_be(hc_control, ehci->ohci_hcctrl_reg);
652 (void) readl_be(ehci->ohci_hcctrl_reg);
653 }
654 #else
655 static inline void set_ohci_hcfs(struct ehci_hcd *ehci, int operational)
656 { }
657 #endif
658
659 /*-------------------------------------------------------------------------*/
660
661 /*
662 * The AMCC 440EPx not only implements its EHCI registers in big-endian
663 * format, but also its DMA data structures (descriptors).
664 *
665 * EHCI controllers accessed through PCI work normally (little-endian
666 * everywhere), so we won't bother supporting a BE-only mode for now.
667 */
668 #ifdef CONFIG_USB_EHCI_BIG_ENDIAN_DESC
669 #define ehci_big_endian_desc(e) ((e)->big_endian_desc)
670
671 /* cpu to ehci */
672 static inline __hc32 cpu_to_hc32 (const struct ehci_hcd *ehci, const u32 x)
673 {
674 return ehci_big_endian_desc(ehci)
675 ? (__force __hc32)cpu_to_be32(x)
676 : (__force __hc32)cpu_to_le32(x);
677 }
678
679 /* ehci to cpu */
680 static inline u32 hc32_to_cpu (const struct ehci_hcd *ehci, const __hc32 x)
681 {
682 return ehci_big_endian_desc(ehci)
683 ? be32_to_cpu((__force __be32)x)
684 : le32_to_cpu((__force __le32)x);
685 }
686
687 static inline u32 hc32_to_cpup (const struct ehci_hcd *ehci, const __hc32 *x)
688 {
689 return ehci_big_endian_desc(ehci)
690 ? be32_to_cpup((__force __be32 *)x)
691 : le32_to_cpup((__force __le32 *)x);
692 }
693
694 #else
695
696 /* cpu to ehci */
697 static inline __hc32 cpu_to_hc32 (const struct ehci_hcd *ehci, const u32 x)
698 {
699 return cpu_to_le32(x);
700 }
701
702 /* ehci to cpu */
703 static inline u32 hc32_to_cpu (const struct ehci_hcd *ehci, const __hc32 x)
704 {
705 return le32_to_cpu(x);
706 }
707
708 static inline u32 hc32_to_cpup (const struct ehci_hcd *ehci, const __hc32 *x)
709 {
710 return le32_to_cpup(x);
711 }
712
713 #endif
714
715 /*-------------------------------------------------------------------------*/
716
717 #ifndef DEBUG
718 #define STUB_DEBUG_FILES
719 #endif /* DEBUG */
720
721 /*-------------------------------------------------------------------------*/
722
723 #endif /* __LINUX_EHCI_HCD_H */
This page took 0.046572 seconds and 5 git commands to generate.