drivers/usb/host/ohci-pci.c

   1 /*
   2  * OHCI HCD (Host Controller Driver) for USB.
   3  *
   4  * (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
   5  * (C) Copyright 2000-2002 David Brownell <dbrownell@users.sourceforge.net>
   6  *
   7  * [ Initialisation is based on Linus'  ]
   8  * [ uhci code and gregs ohci fragments ]
   9  * [ (C) Copyright 1999 Linus Torvalds  ]
  10  * [ (C) Copyright 1999 Gregory P. Smith]
  11  *
  12  * PCI Bus Glue
  13  *
  14  * This file is licenced under the GPL.
  15  */
  16
  17 #ifndef CONFIG_PCI
  18 #error "This file is PCI bus glue.  CONFIG_PCI must be defined."
  19 #endif
  20
  21 #include <linux/pci.h>
  22 #include <linux/io.h>
  23
  24
  25 /* constants used to work around PM-related transfer
  26  * glitches in some AMD 700 series southbridges
  27  */
  28 #define AB_REG_BAR      0xf0
  29 #define AB_INDX(addr)   ((addr) + 0x00)
  30 #define AB_DATA(addr)   ((addr) + 0x04)
  31 #define AX_INDXC        0X30
  32 #define AX_DATAC        0x34
  33
  34 #define NB_PCIE_INDX_ADDR       0xe0
  35 #define NB_PCIE_INDX_DATA       0xe4
  36 #define PCIE_P_CNTL             0x10040
  37 #define BIF_NB                  0x10002
  38
  39 static struct pci_dev *amd_smbus_dev;
  40 static struct pci_dev *amd_hb_dev;
  41 static int amd_ohci_iso_count;
  42
  43 /*-------------------------------------------------------------------------*/
  44
  45 static int broken_suspend(struct usb_hcd *hcd)
  46 {
  47         device_init_wakeup(&hcd->self.root_hub->dev, 0);
  48         return 0;
  49 }
  50
  51 /* AMD 756, for most chips (early revs), corrupts register
  52  * values on read ... so enable the vendor workaround.
  53  */
  54 static int ohci_quirk_amd756(struct usb_hcd *hcd)
  55 {
  56         struct ohci_hcd *ohci = hcd_to_ohci (hcd);
  57
  58         ohci->flags = OHCI_QUIRK_AMD756;
  59         ohci_dbg (ohci, "AMD756 erratum 4 workaround\n");
  60
  61         /* also erratum 10 (suspend/resume issues) */
  62         return broken_suspend(hcd);
  63 }
  64
  65 /* Apple's OHCI driver has a lot of bizarre workarounds
  66  * for this chip.  Evidently control and bulk lists
  67  * can get confused.  (B&W G3 models, and ...)
  68  */
  69 static int ohci_quirk_opti(struct usb_hcd *hcd)
  70 {
  71         struct ohci_hcd *ohci = hcd_to_ohci (hcd);
  72
  73         ohci_dbg (ohci, "WARNING: OPTi workarounds unavailable\n");
  74
  75         return 0;
  76 }
  77
  78 /* Check for NSC87560. We have to look at the bridge (fn1) to
  79  * identify the USB (fn2). This quirk might apply to more or
  80  * even all NSC stuff.
  81  */
  82 static int ohci_quirk_ns(struct usb_hcd *hcd)
  83 {
  84         struct pci_dev *pdev = to_pci_dev(hcd->self.controller);
  85         struct pci_dev  *b;
  86
  87         b  = pci_get_slot (pdev->bus, PCI_DEVFN (PCI_SLOT (pdev->devfn), 1));
  88         if (b && b->device == PCI_DEVICE_ID_NS_87560_LIO
  89             && b->vendor == PCI_VENDOR_ID_NS) {
  90                 struct ohci_hcd *ohci = hcd_to_ohci (hcd);
  91
  92                 ohci->flags |= OHCI_QUIRK_SUPERIO;
  93                 ohci_dbg (ohci, "Using NSC SuperIO setup\n");
  94         }
  95         pci_dev_put(b);
  96
  97         return 0;
  98 }
  99
 100 /* Check for Compaq's ZFMicro chipset, which needs short
 101  * delays before control or bulk queues get re-activated
 102  * in finish_unlinks()
 103  */
 104 static int ohci_quirk_zfmicro(struct usb_hcd *hcd)
 105 {
 106         struct ohci_hcd *ohci = hcd_to_ohci (hcd);
 107
 108         ohci->flags |= OHCI_QUIRK_ZFMICRO;
 109         ohci_dbg(ohci, "enabled Compaq ZFMicro chipset quirks\n");
 110
 111         return 0;
 112 }
 113
 114 /* Check for Toshiba SCC OHCI which has big endian registers
 115  * and little endian in memory data structures
 116  */
 117 static int ohci_quirk_toshiba_scc(struct usb_hcd *hcd)
 118 {
 119         struct ohci_hcd *ohci = hcd_to_ohci (hcd);
 120
 121         /* That chip is only present in the southbridge of some
 122          * cell based platforms which are supposed to select
 123          * CONFIG_USB_OHCI_BIG_ENDIAN_MMIO. We verify here if
 124          * that was the case though.
 125          */
 126 #ifdef CONFIG_USB_OHCI_BIG_ENDIAN_MMIO
 127         ohci->flags |= OHCI_QUIRK_BE_MMIO;
 128         ohci_dbg (ohci, "enabled big endian Toshiba quirk\n");
 129         return 0;
 130 #else
 131         ohci_err (ohci, "unsupported big endian Toshiba quirk\n");
 132         return -ENXIO;
 133 #endif
 134 }
 135
 136 /* Check for NEC chip and apply quirk for allegedly lost interrupts.
 137  */
 138
 139 static void ohci_quirk_nec_worker(struct work_struct *work)
 140 {
 141         struct ohci_hcd *ohci = container_of(work, struct ohci_hcd, nec_work);
 142         int status;
 143
 144         status = ohci_init(ohci);
 145         if (status != 0) {
 146                 ohci_err(ohci, "Restarting NEC controller failed in %s, %d\n",
 147                          "ohci_init", status);
 148                 return;
 149         }
 150
 151         status = ohci_restart(ohci);
 152         if (status != 0)
 153                 ohci_err(ohci, "Restarting NEC controller failed in %s, %d\n",
 154                          "ohci_restart", status);
 155 }
 156
 157 static int ohci_quirk_nec(struct usb_hcd *hcd)
 158 {
 159         struct ohci_hcd *ohci = hcd_to_ohci (hcd);
 160
 161         ohci->flags |= OHCI_QUIRK_NEC;
 162         INIT_WORK(&ohci->nec_work, ohci_quirk_nec_worker);
 163         ohci_dbg (ohci, "enabled NEC chipset lost interrupt quirk\n");
 164
 165         return 0;
 166 }
 167
 168 static int ohci_quirk_amd700(struct usb_hcd *hcd)
 169 {
 170         struct ohci_hcd *ohci = hcd_to_ohci(hcd);
 171         u8 rev = 0;
 172
 173         if (!amd_smbus_dev)
 174                 amd_smbus_dev = pci_get_device(PCI_VENDOR_ID_ATI,
 175                                 PCI_DEVICE_ID_ATI_SBX00_SMBUS, NULL);
 176         if (!amd_smbus_dev)
 177                 return 0;
 178
 179         pci_read_config_byte(amd_smbus_dev, PCI_REVISION_ID, &rev);
 180         if ((rev > 0x3b) || (rev < 0x30)) {
 181                 pci_dev_put(amd_smbus_dev);
 182                 amd_smbus_dev = NULL;
 183                 return 0;
 184         }
 185
 186         amd_ohci_iso_count++;
 187
 188         if (!amd_hb_dev)
 189                 amd_hb_dev = pci_get_device(PCI_VENDOR_ID_AMD, 0x9600, NULL);
 190
 191         ohci->flags |= OHCI_QUIRK_AMD_ISO;
 192         ohci_dbg(ohci, "enabled AMD ISO transfers quirk\n");
 193
 194         return 0;
 195 }
 196
 197 /*
 198  * The hardware normally enables the A-link power management feature, which
 199  * lets the system lower the power consumption in idle states.
 200  *
 201  * Assume the system is configured to have USB 1.1 ISO transfers going
 202  * to or from a USB device.  Without this quirk, that stream may stutter
 203  * or have breaks occasionally.  For transfers going to speakers, this
 204  * makes a very audible mess...
 205  *
 206  * That audio playback corruption is due to the audio stream getting
 207  * interrupted occasionally when the link goes in lower power state
 208  * This USB quirk prevents the link going into that lower power state
 209  * during audio playback or other ISO operations.
 210  */
 211 static void quirk_amd_pll(int on)
 212 {
 213         u32 addr;
 214         u32 val;
 215         u32 bit = (on > 0) ? 1 : 0;
 216
 217         pci_read_config_dword(amd_smbus_dev, AB_REG_BAR, &addr);
 218
 219         /* BIT names/meanings are NDA-protected, sorry ... */
 220
 221         outl(AX_INDXC, AB_INDX(addr));
 222         outl(0x40, AB_DATA(addr));
 223         outl(AX_DATAC, AB_INDX(addr));
 224         val = inl(AB_DATA(addr));
 225         val &= ~((1 << 3) | (1 << 4) | (1 << 9));
 226         val |= (bit << 3) | ((!bit) << 4) | ((!bit) << 9);
 227         outl(val, AB_DATA(addr));
 228
 229         if (amd_hb_dev) {
 230                 addr = PCIE_P_CNTL;
 231                 pci_write_config_dword(amd_hb_dev, NB_PCIE_INDX_ADDR, addr);
 232
 233                 pci_read_config_dword(amd_hb_dev, NB_PCIE_INDX_DATA, &val);
 234                 val &= ~(1 | (1 << 3) | (1 << 4) | (1 << 9) | (1 << 12));
 235                 val |= bit | (bit << 3) | (bit << 12);
 236                 val |= ((!bit) << 4) | ((!bit) << 9);
 237                 pci_write_config_dword(amd_hb_dev, NB_PCIE_INDX_DATA, val);
 238
 239                 addr = BIF_NB;
 240                 pci_write_config_dword(amd_hb_dev, NB_PCIE_INDX_ADDR, addr);
 241
 242                 pci_read_config_dword(amd_hb_dev, NB_PCIE_INDX_DATA, &val);
 243                 val &= ~(1 << 8);
 244                 val |= bit << 8;
 245                 pci_write_config_dword(amd_hb_dev, NB_PCIE_INDX_DATA, val);
 246         }
 247 }
 248
 249 static void amd_iso_dev_put(void)
 250 {
 251         amd_ohci_iso_count--;
 252         if (amd_ohci_iso_count == 0) {
 253                 if (amd_smbus_dev) {
 254                         pci_dev_put(amd_smbus_dev);
 255                         amd_smbus_dev = NULL;
 256                 }
 257                 if (amd_hb_dev) {
 258                         pci_dev_put(amd_hb_dev);
 259                         amd_hb_dev = NULL;
 260                 }
 261         }
 262
 263 }
 264
 265 /* List of quirks for OHCI */
 266 static const struct pci_device_id ohci_pci_quirks[] = {
 267         {
 268                 PCI_DEVICE(PCI_VENDOR_ID_AMD, 0x740c),
 269                 .driver_data = (unsigned long)ohci_quirk_amd756,
 270         },
 271         {
 272                 PCI_DEVICE(PCI_VENDOR_ID_OPTI, 0xc861),
 273                 .driver_data = (unsigned long)ohci_quirk_opti,
 274         },
 275         {
 276                 PCI_DEVICE(PCI_VENDOR_ID_NS, PCI_ANY_ID),
 277                 .driver_data = (unsigned long)ohci_quirk_ns,
 278         },
 279         {
 280                 PCI_DEVICE(PCI_VENDOR_ID_COMPAQ, 0xa0f8),
 281                 .driver_data = (unsigned long)ohci_quirk_zfmicro,
 282         },
 283         {
 284                 PCI_DEVICE(PCI_VENDOR_ID_TOSHIBA_2, 0x01b6),
 285                 .driver_data = (unsigned long)ohci_quirk_toshiba_scc,
 286         },
 287         {
 288                 PCI_DEVICE(PCI_VENDOR_ID_NEC, PCI_DEVICE_ID_NEC_USB),
 289                 .driver_data = (unsigned long)ohci_quirk_nec,
 290         },
 291         {
 292                 /* Toshiba portege 4000 */
 293                 .vendor         = PCI_VENDOR_ID_AL,
 294                 .device         = 0x5237,
 295                 .subvendor      = PCI_VENDOR_ID_TOSHIBA,
 296                 .subdevice      = 0x0004,
 297                 .driver_data    = (unsigned long) broken_suspend,
 298         },
 299         {
 300                 PCI_DEVICE(PCI_VENDOR_ID_ITE, 0x8152),
 301                 .driver_data = (unsigned long) broken_suspend,
 302         },
 303         {
 304                 PCI_DEVICE(PCI_VENDOR_ID_ATI, 0x4397),
 305                 .driver_data = (unsigned long)ohci_quirk_amd700,
 306         },
 307         {
 308                 PCI_DEVICE(PCI_VENDOR_ID_ATI, 0x4398),
 309                 .driver_data = (unsigned long)ohci_quirk_amd700,
 310         },
 311         {
 312                 PCI_DEVICE(PCI_VENDOR_ID_ATI, 0x4399),
 313                 .driver_data = (unsigned long)ohci_quirk_amd700,
 314         },
 315
 316         /* FIXME for some of the early AMD 760 southbridges, OHCI
 317          * won't work at all.  blacklist them.
 318          */
 319
 320         {},
 321 };
 322
 323 static int ohci_pci_reset (struct usb_hcd *hcd)
 324 {
 325         struct ohci_hcd *ohci = hcd_to_ohci (hcd);
 326         int ret = 0;
 327
 328         if (hcd->self.controller) {
 329                 struct pci_dev *pdev = to_pci_dev(hcd->self.controller);
 330                 const struct pci_device_id *quirk_id;
 331
 332                 quirk_id = pci_match_id(ohci_pci_quirks, pdev);
 333                 if (quirk_id != NULL) {
 334                         int (*quirk)(struct usb_hcd *ohci);
 335                         quirk = (void *)quirk_id->driver_data;
 336                         ret = quirk(hcd);
 337                 }
 338         }
 339         if (ret == 0) {
 340                 ohci_hcd_init (ohci);
 341                 return ohci_init (ohci);
 342         }
 343         return ret;
 344 }
 345
 346
 347 static int __devinit ohci_pci_start (struct usb_hcd *hcd)
 348 {
 349         struct ohci_hcd *ohci = hcd_to_ohci (hcd);
 350         int             ret;
 351
 352 #ifdef CONFIG_PM /* avoid warnings about unused pdev */
 353         if (hcd->self.controller) {
 354                 struct pci_dev *pdev = to_pci_dev(hcd->self.controller);
 355
 356                 /* RWC may not be set for add-in PCI cards, since boot
 357                  * firmware probably ignored them.  This transfers PCI
 358                  * PM wakeup capabilities.
 359                  */
 360                 if (device_can_wakeup(&pdev->dev))
 361                         ohci->hc_control |= OHCI_CTRL_RWC;
 362         }
 363 #endif /* CONFIG_PM */
 364
 365         ret = ohci_run (ohci);
 366         if (ret < 0) {
 367                 ohci_err (ohci, "can't start\n");
 368                 ohci_stop (hcd);
 369         }
 370         return ret;
 371 }
 372
 373 #ifdef  CONFIG_PM
 374
 375 static int ohci_pci_suspend (struct usb_hcd *hcd, pm_message_t message)
 376 {
 377         struct ohci_hcd *ohci = hcd_to_ohci (hcd);
 378         unsigned long   flags;
 379         int             rc = 0;
 380
 381         /* Root hub was already suspended. Disable irq emission and
 382          * mark HW unaccessible, bail out if RH has been resumed. Use
 383          * the spinlock to properly synchronize with possible pending
 384          * RH suspend or resume activity.
 385          *
 386          * This is still racy as hcd->state is manipulated outside of
 387          * any locks =P But that will be a different fix.
 388          */
 389         spin_lock_irqsave (&ohci->lock, flags);
 390         if (hcd->state != HC_STATE_SUSPENDED) {
 391                 rc = -EINVAL;
 392                 goto bail;
 393         }
 394         ohci_writel(ohci, OHCI_INTR_MIE, &ohci->regs->intrdisable);
 395         (void)ohci_readl(ohci, &ohci->regs->intrdisable);
 396
 397         /* make sure snapshot being resumed re-enumerates everything */
 398         if (message.event == PM_EVENT_PRETHAW)
 399                 ohci_usb_reset(ohci);
 400
 401         clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
 402  bail:
 403         spin_unlock_irqrestore (&ohci->lock, flags);
 404
 405         return rc;
 406 }
 407
 408
 409 static int ohci_pci_resume (struct usb_hcd *hcd)
 410 {
 411         set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
 412         ohci_finish_controller_resume(hcd);
 413         return 0;
 414 }
 415
 416 #endif  /* CONFIG_PM */
 417
 418
 419 /*-------------------------------------------------------------------------*/
 420
 421 static const struct hc_driver ohci_pci_hc_driver = {
 422         .description =          hcd_name,
 423         .product_desc =         "OHCI Host Controller",
 424         .hcd_priv_size =        sizeof(struct ohci_hcd),
 425
 426         /*
 427          * generic hardware linkage
 428          */
 429         .irq =                  ohci_irq,
 430         .flags =                HCD_MEMORY | HCD_USB11,
 431
 432         /*
 433          * basic lifecycle operations
 434          */
 435         .reset =                ohci_pci_reset,
 436         .start =                ohci_pci_start,
 437         .stop =                 ohci_stop,
 438         .shutdown =             ohci_shutdown,
 439
 440 #ifdef  CONFIG_PM
 441         .pci_suspend =          ohci_pci_suspend,
 442         .pci_resume =           ohci_pci_resume,
 443 #endif
 444
 445         /*
 446          * managing i/o requests and associated device resources
 447          */
 448         .urb_enqueue =          ohci_urb_enqueue,
 449         .urb_dequeue =          ohci_urb_dequeue,
 450         .endpoint_disable =     ohci_endpoint_disable,
 451
 452         /*
 453          * scheduling support
 454          */
 455         .get_frame_number =     ohci_get_frame,
 456
 457         /*
 458          * root hub support
 459          */
 460         .hub_status_data =      ohci_hub_status_data,
 461         .hub_control =          ohci_hub_control,
 462 #ifdef  CONFIG_PM
 463         .bus_suspend =          ohci_bus_suspend,
 464         .bus_resume =           ohci_bus_resume,
 465 #endif
 466         .start_port_reset =     ohci_start_port_reset,
 467 };
 468
 469 /*-------------------------------------------------------------------------*/
 470
 471
 472 static const struct pci_device_id pci_ids [] = { {
 473         /* handle any USB OHCI controller */
 474         PCI_DEVICE_CLASS(PCI_CLASS_SERIAL_USB_OHCI, ~0),
 475         .driver_data =  (unsigned long) &ohci_pci_hc_driver,
 476         }, { /* end: all zeroes */ }
 477 };
 478 MODULE_DEVICE_TABLE (pci, pci_ids);
 479
 480 /* pci driver glue; this is a "new style" PCI driver module */
 481 static struct pci_driver ohci_pci_driver = {
 482         .name =         (char *) hcd_name,
 483         .id_table =     pci_ids,
 484
 485         .probe =        usb_hcd_pci_probe,
 486         .remove =       usb_hcd_pci_remove,
 487
 488 #ifdef  CONFIG_PM
 489         .suspend =      usb_hcd_pci_suspend,
 490         .resume_early = usb_hcd_pci_resume_early,
 491         .resume =       usb_hcd_pci_resume,
 492 #endif
 493
 494         .shutdown =     usb_hcd_pci_shutdown,
 495 };
 496