xHCI: Clear PLC for USB2 root hub ports
[deliverable/linux.git] / drivers / usb / host / ohci-pci.c
1 /*
2 * OHCI HCD (Host Controller Driver) for USB.
3 *
4 * (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
5 * (C) Copyright 2000-2002 David Brownell <dbrownell@users.sourceforge.net>
6 *
7 * [ Initialisation is based on Linus' ]
8 * [ uhci code and gregs ohci fragments ]
9 * [ (C) Copyright 1999 Linus Torvalds ]
10 * [ (C) Copyright 1999 Gregory P. Smith]
11 *
12 * PCI Bus Glue
13 *
14 * This file is licenced under the GPL.
15 */
16
17 #ifndef CONFIG_PCI
18 #error "This file is PCI bus glue. CONFIG_PCI must be defined."
19 #endif
20
21 #include <linux/pci.h>
22 #include <linux/io.h>
23
24
25 /*-------------------------------------------------------------------------*/
26
27 static int broken_suspend(struct usb_hcd *hcd)
28 {
29 device_init_wakeup(&hcd->self.root_hub->dev, 0);
30 return 0;
31 }
32
33 /* AMD 756, for most chips (early revs), corrupts register
34 * values on read ... so enable the vendor workaround.
35 */
36 static int ohci_quirk_amd756(struct usb_hcd *hcd)
37 {
38 struct ohci_hcd *ohci = hcd_to_ohci (hcd);
39
40 ohci->flags = OHCI_QUIRK_AMD756;
41 ohci_dbg (ohci, "AMD756 erratum 4 workaround\n");
42
43 /* also erratum 10 (suspend/resume issues) */
44 return broken_suspend(hcd);
45 }
46
47 /* Apple's OHCI driver has a lot of bizarre workarounds
48 * for this chip. Evidently control and bulk lists
49 * can get confused. (B&W G3 models, and ...)
50 */
51 static int ohci_quirk_opti(struct usb_hcd *hcd)
52 {
53 struct ohci_hcd *ohci = hcd_to_ohci (hcd);
54
55 ohci_dbg (ohci, "WARNING: OPTi workarounds unavailable\n");
56
57 return 0;
58 }
59
60 /* Check for NSC87560. We have to look at the bridge (fn1) to
61 * identify the USB (fn2). This quirk might apply to more or
62 * even all NSC stuff.
63 */
64 static int ohci_quirk_ns(struct usb_hcd *hcd)
65 {
66 struct pci_dev *pdev = to_pci_dev(hcd->self.controller);
67 struct pci_dev *b;
68
69 b = pci_get_slot (pdev->bus, PCI_DEVFN (PCI_SLOT (pdev->devfn), 1));
70 if (b && b->device == PCI_DEVICE_ID_NS_87560_LIO
71 && b->vendor == PCI_VENDOR_ID_NS) {
72 struct ohci_hcd *ohci = hcd_to_ohci (hcd);
73
74 ohci->flags |= OHCI_QUIRK_SUPERIO;
75 ohci_dbg (ohci, "Using NSC SuperIO setup\n");
76 }
77 pci_dev_put(b);
78
79 return 0;
80 }
81
82 /* Check for Compaq's ZFMicro chipset, which needs short
83 * delays before control or bulk queues get re-activated
84 * in finish_unlinks()
85 */
86 static int ohci_quirk_zfmicro(struct usb_hcd *hcd)
87 {
88 struct ohci_hcd *ohci = hcd_to_ohci (hcd);
89
90 ohci->flags |= OHCI_QUIRK_ZFMICRO;
91 ohci_dbg(ohci, "enabled Compaq ZFMicro chipset quirks\n");
92
93 return 0;
94 }
95
96 /* Check for Toshiba SCC OHCI which has big endian registers
97 * and little endian in memory data structures
98 */
99 static int ohci_quirk_toshiba_scc(struct usb_hcd *hcd)
100 {
101 struct ohci_hcd *ohci = hcd_to_ohci (hcd);
102
103 /* That chip is only present in the southbridge of some
104 * cell based platforms which are supposed to select
105 * CONFIG_USB_OHCI_BIG_ENDIAN_MMIO. We verify here if
106 * that was the case though.
107 */
108 #ifdef CONFIG_USB_OHCI_BIG_ENDIAN_MMIO
109 ohci->flags |= OHCI_QUIRK_BE_MMIO;
110 ohci_dbg (ohci, "enabled big endian Toshiba quirk\n");
111 return 0;
112 #else
113 ohci_err (ohci, "unsupported big endian Toshiba quirk\n");
114 return -ENXIO;
115 #endif
116 }
117
118 /* Check for NEC chip and apply quirk for allegedly lost interrupts.
119 */
120
121 static void ohci_quirk_nec_worker(struct work_struct *work)
122 {
123 struct ohci_hcd *ohci = container_of(work, struct ohci_hcd, nec_work);
124 int status;
125
126 status = ohci_init(ohci);
127 if (status != 0) {
128 ohci_err(ohci, "Restarting NEC controller failed in %s, %d\n",
129 "ohci_init", status);
130 return;
131 }
132
133 status = ohci_restart(ohci);
134 if (status != 0)
135 ohci_err(ohci, "Restarting NEC controller failed in %s, %d\n",
136 "ohci_restart", status);
137 }
138
139 static int ohci_quirk_nec(struct usb_hcd *hcd)
140 {
141 struct ohci_hcd *ohci = hcd_to_ohci (hcd);
142
143 ohci->flags |= OHCI_QUIRK_NEC;
144 INIT_WORK(&ohci->nec_work, ohci_quirk_nec_worker);
145 ohci_dbg (ohci, "enabled NEC chipset lost interrupt quirk\n");
146
147 return 0;
148 }
149
150 static int ohci_quirk_amd700(struct usb_hcd *hcd)
151 {
152 struct ohci_hcd *ohci = hcd_to_ohci(hcd);
153 struct pci_dev *amd_smbus_dev;
154 u8 rev;
155
156 if (usb_amd_find_chipset_info())
157 ohci->flags |= OHCI_QUIRK_AMD_PLL;
158
159 amd_smbus_dev = pci_get_device(PCI_VENDOR_ID_ATI,
160 PCI_DEVICE_ID_ATI_SBX00_SMBUS, NULL);
161 if (!amd_smbus_dev)
162 return 0;
163
164 rev = amd_smbus_dev->revision;
165
166 /* SB800 needs pre-fetch fix */
167 if ((rev >= 0x40) && (rev <= 0x4f)) {
168 ohci->flags |= OHCI_QUIRK_AMD_PREFETCH;
169 ohci_dbg(ohci, "enabled AMD prefetch quirk\n");
170 }
171
172 pci_dev_put(amd_smbus_dev);
173 amd_smbus_dev = NULL;
174
175 return 0;
176 }
177
178 /* nVidia controllers continue to drive Reset signalling on the bus
179 * even after system shutdown, wasting power. This flag tells the
180 * shutdown routine to leave the controller OPERATIONAL instead of RESET.
181 */
182 static int ohci_quirk_nvidia_shutdown(struct usb_hcd *hcd)
183 {
184 struct pci_dev *pdev = to_pci_dev(hcd->self.controller);
185 struct ohci_hcd *ohci = hcd_to_ohci(hcd);
186
187 /* Evidently nVidia fixed their later hardware; this is a guess at
188 * the changeover point.
189 */
190 #define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_USB 0x026d
191
192 if (pdev->device < PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_USB) {
193 ohci->flags |= OHCI_QUIRK_SHUTDOWN;
194 ohci_dbg(ohci, "enabled nVidia shutdown quirk\n");
195 }
196
197 return 0;
198 }
199
200 static void sb800_prefetch(struct ohci_hcd *ohci, int on)
201 {
202 struct pci_dev *pdev;
203 u16 misc;
204
205 pdev = to_pci_dev(ohci_to_hcd(ohci)->self.controller);
206 pci_read_config_word(pdev, 0x50, &misc);
207 if (on == 0)
208 pci_write_config_word(pdev, 0x50, misc & 0xfcff);
209 else
210 pci_write_config_word(pdev, 0x50, misc | 0x0300);
211 }
212
213 /* List of quirks for OHCI */
214 static const struct pci_device_id ohci_pci_quirks[] = {
215 {
216 PCI_DEVICE(PCI_VENDOR_ID_AMD, 0x740c),
217 .driver_data = (unsigned long)ohci_quirk_amd756,
218 },
219 {
220 PCI_DEVICE(PCI_VENDOR_ID_OPTI, 0xc861),
221 .driver_data = (unsigned long)ohci_quirk_opti,
222 },
223 {
224 PCI_DEVICE(PCI_VENDOR_ID_NS, PCI_ANY_ID),
225 .driver_data = (unsigned long)ohci_quirk_ns,
226 },
227 {
228 PCI_DEVICE(PCI_VENDOR_ID_COMPAQ, 0xa0f8),
229 .driver_data = (unsigned long)ohci_quirk_zfmicro,
230 },
231 {
232 PCI_DEVICE(PCI_VENDOR_ID_TOSHIBA_2, 0x01b6),
233 .driver_data = (unsigned long)ohci_quirk_toshiba_scc,
234 },
235 {
236 PCI_DEVICE(PCI_VENDOR_ID_NEC, PCI_DEVICE_ID_NEC_USB),
237 .driver_data = (unsigned long)ohci_quirk_nec,
238 },
239 {
240 /* Toshiba portege 4000 */
241 .vendor = PCI_VENDOR_ID_AL,
242 .device = 0x5237,
243 .subvendor = PCI_VENDOR_ID_TOSHIBA,
244 .subdevice = 0x0004,
245 .driver_data = (unsigned long) broken_suspend,
246 },
247 {
248 PCI_DEVICE(PCI_VENDOR_ID_ITE, 0x8152),
249 .driver_data = (unsigned long) broken_suspend,
250 },
251 {
252 PCI_DEVICE(PCI_VENDOR_ID_ATI, 0x4397),
253 .driver_data = (unsigned long)ohci_quirk_amd700,
254 },
255 {
256 PCI_DEVICE(PCI_VENDOR_ID_ATI, 0x4398),
257 .driver_data = (unsigned long)ohci_quirk_amd700,
258 },
259 {
260 PCI_DEVICE(PCI_VENDOR_ID_ATI, 0x4399),
261 .driver_data = (unsigned long)ohci_quirk_amd700,
262 },
263 {
264 PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_ANY_ID),
265 .driver_data = (unsigned long) ohci_quirk_nvidia_shutdown,
266 },
267
268 /* FIXME for some of the early AMD 760 southbridges, OHCI
269 * won't work at all. blacklist them.
270 */
271
272 {},
273 };
274
275 static int ohci_pci_reset (struct usb_hcd *hcd)
276 {
277 struct ohci_hcd *ohci = hcd_to_ohci (hcd);
278 int ret = 0;
279
280 if (hcd->self.controller) {
281 struct pci_dev *pdev = to_pci_dev(hcd->self.controller);
282 const struct pci_device_id *quirk_id;
283
284 quirk_id = pci_match_id(ohci_pci_quirks, pdev);
285 if (quirk_id != NULL) {
286 int (*quirk)(struct usb_hcd *ohci);
287 quirk = (void *)quirk_id->driver_data;
288 ret = quirk(hcd);
289 }
290 }
291 if (ret == 0) {
292 ohci_hcd_init (ohci);
293 return ohci_init (ohci);
294 }
295 return ret;
296 }
297
298
299 static int __devinit ohci_pci_start (struct usb_hcd *hcd)
300 {
301 struct ohci_hcd *ohci = hcd_to_ohci (hcd);
302 int ret;
303
304 #ifdef CONFIG_PM /* avoid warnings about unused pdev */
305 if (hcd->self.controller) {
306 struct pci_dev *pdev = to_pci_dev(hcd->self.controller);
307
308 /* RWC may not be set for add-in PCI cards, since boot
309 * firmware probably ignored them. This transfers PCI
310 * PM wakeup capabilities.
311 */
312 if (device_can_wakeup(&pdev->dev))
313 ohci->hc_control |= OHCI_CTRL_RWC;
314 }
315 #endif /* CONFIG_PM */
316
317 ret = ohci_run (ohci);
318 if (ret < 0) {
319 ohci_err (ohci, "can't start\n");
320 ohci_stop (hcd);
321 }
322 return ret;
323 }
324
325 #ifdef CONFIG_PM
326
327 static int ohci_pci_suspend(struct usb_hcd *hcd, bool do_wakeup)
328 {
329 struct ohci_hcd *ohci = hcd_to_ohci (hcd);
330 unsigned long flags;
331 int rc = 0;
332
333 /* Root hub was already suspended. Disable irq emission and
334 * mark HW unaccessible, bail out if RH has been resumed. Use
335 * the spinlock to properly synchronize with possible pending
336 * RH suspend or resume activity.
337 *
338 * This is still racy as hcd->state is manipulated outside of
339 * any locks =P But that will be a different fix.
340 */
341 spin_lock_irqsave (&ohci->lock, flags);
342 if (hcd->state != HC_STATE_SUSPENDED) {
343 rc = -EINVAL;
344 goto bail;
345 }
346 ohci_writel(ohci, OHCI_INTR_MIE, &ohci->regs->intrdisable);
347 (void)ohci_readl(ohci, &ohci->regs->intrdisable);
348
349 clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
350 bail:
351 spin_unlock_irqrestore (&ohci->lock, flags);
352
353 return rc;
354 }
355
356
357 static int ohci_pci_resume(struct usb_hcd *hcd, bool hibernated)
358 {
359 set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
360
361 /* Make sure resume from hibernation re-enumerates everything */
362 if (hibernated)
363 ohci_usb_reset(hcd_to_ohci(hcd));
364
365 ohci_finish_controller_resume(hcd);
366 return 0;
367 }
368
369 #endif /* CONFIG_PM */
370
371
372 /*-------------------------------------------------------------------------*/
373
374 static const struct hc_driver ohci_pci_hc_driver = {
375 .description = hcd_name,
376 .product_desc = "OHCI Host Controller",
377 .hcd_priv_size = sizeof(struct ohci_hcd),
378
379 /*
380 * generic hardware linkage
381 */
382 .irq = ohci_irq,
383 .flags = HCD_MEMORY | HCD_USB11,
384
385 /*
386 * basic lifecycle operations
387 */
388 .reset = ohci_pci_reset,
389 .start = ohci_pci_start,
390 .stop = ohci_stop,
391 .shutdown = ohci_shutdown,
392
393 #ifdef CONFIG_PM
394 .pci_suspend = ohci_pci_suspend,
395 .pci_resume = ohci_pci_resume,
396 #endif
397
398 /*
399 * managing i/o requests and associated device resources
400 */
401 .urb_enqueue = ohci_urb_enqueue,
402 .urb_dequeue = ohci_urb_dequeue,
403 .endpoint_disable = ohci_endpoint_disable,
404
405 /*
406 * scheduling support
407 */
408 .get_frame_number = ohci_get_frame,
409
410 /*
411 * root hub support
412 */
413 .hub_status_data = ohci_hub_status_data,
414 .hub_control = ohci_hub_control,
415 #ifdef CONFIG_PM
416 .bus_suspend = ohci_bus_suspend,
417 .bus_resume = ohci_bus_resume,
418 #endif
419 .start_port_reset = ohci_start_port_reset,
420 };
421
422 /*-------------------------------------------------------------------------*/
423
424
425 static const struct pci_device_id pci_ids [] = { {
426 /* handle any USB OHCI controller */
427 PCI_DEVICE_CLASS(PCI_CLASS_SERIAL_USB_OHCI, ~0),
428 .driver_data = (unsigned long) &ohci_pci_hc_driver,
429 }, { /* end: all zeroes */ }
430 };
431 MODULE_DEVICE_TABLE (pci, pci_ids);
432
433 /* pci driver glue; this is a "new style" PCI driver module */
434 static struct pci_driver ohci_pci_driver = {
435 .name = (char *) hcd_name,
436 .id_table = pci_ids,
437
438 .probe = usb_hcd_pci_probe,
439 .remove = usb_hcd_pci_remove,
440 .shutdown = usb_hcd_pci_shutdown,
441
442 #ifdef CONFIG_PM_SLEEP
443 .driver = {
444 .pm = &usb_hcd_pci_pm_ops
445 },
446 #endif
447 };
This page took 0.05064 seconds and 5 git commands to generate.