2 * xHCI host controller driver
4 * Copyright (C) 2008 Intel Corp.
7 * Some code borrowed from the Linux EHCI driver.
9 * This program is free software; you can redistribute it and/or modify
10 * it under the terms of the GNU General Public License version 2 as
11 * published by the Free Software Foundation.
13 * This program is distributed in the hope that it will be useful, but
14 * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
15 * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
18 * You should have received a copy of the GNU General Public License
19 * along with this program; if not, write to the Free Software Foundation,
20 * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
24 * Ring initialization rules:
25 * 1. Each segment is initialized to zero, except for link TRBs.
26 * 2. Ring cycle state = 0. This represents Producer Cycle State (PCS) or
27 * Consumer Cycle State (CCS), depending on ring function.
28 * 3. Enqueue pointer = dequeue pointer = address of first TRB in the segment.
30 * Ring behavior rules:
31 * 1. A ring is empty if enqueue == dequeue. This means there will always be at
32 * least one free TRB in the ring. This is useful if you want to turn that
33 * into a link TRB and expand the ring.
34 * 2. When incrementing an enqueue or dequeue pointer, if the next TRB is a
35 * link TRB, then load the pointer with the address in the link TRB. If the
36 * link TRB had its toggle bit set, you may need to update the ring cycle
37 * state (see cycle bit rules). You may have to do this multiple times
38 * until you reach a non-link TRB.
39 * 3. A ring is full if enqueue++ (for the definition of increment above)
40 * equals the dequeue pointer.
43 * 1. When a consumer increments a dequeue pointer and encounters a toggle bit
44 * in a link TRB, it must toggle the ring cycle state.
45 * 2. When a producer increments an enqueue pointer and encounters a toggle bit
46 * in a link TRB, it must toggle the ring cycle state.
49 * 1. Check if ring is full before you enqueue.
50 * 2. Write the ring cycle state to the cycle bit in the TRB you're enqueuing.
51 * Update enqueue pointer between each write (which may update the ring
53 * 3. Notify consumer. If SW is producer, it rings the doorbell for command
54 * and endpoint rings. If HC is the producer for the event ring,
55 * and it generates an interrupt according to interrupt modulation rules.
58 * 1. Check if TRB belongs to you. If the cycle bit == your ring cycle state,
59 * the TRB is owned by the consumer.
60 * 2. Update dequeue pointer (which may update the ring cycle state) and
61 * continue processing TRBs until you reach a TRB which is not owned by you.
62 * 3. Notify the producer. SW is the consumer for the event ring, and it
63 * updates event ring dequeue pointer. HC is the consumer for the command and
64 * endpoint rings; it generates events on the event ring for these.
67 #include <linux/scatterlist.h>
71 * Returns zero if the TRB isn't in this segment, otherwise it returns the DMA
74 dma_addr_t
trb_virt_to_dma(struct xhci_segment
*seg
,
79 if (!seg
|| !trb
|| (void *) trb
< (void *) seg
->trbs
)
81 /* offset in bytes, since these are byte-addressable */
82 offset
= (unsigned int) trb
- (unsigned int) seg
->trbs
;
83 /* SEGMENT_SIZE in bytes, trbs are 16-byte aligned */
84 if (offset
> SEGMENT_SIZE
|| (offset
% sizeof(*trb
)) != 0)
86 return seg
->dma
+ offset
;
89 /* Does this link TRB point to the first segment in a ring,
90 * or was the previous TRB the last TRB on the last segment in the ERST?
92 static inline bool last_trb_on_last_seg(struct xhci_hcd
*xhci
, struct xhci_ring
*ring
,
93 struct xhci_segment
*seg
, union xhci_trb
*trb
)
95 if (ring
== xhci
->event_ring
)
96 return (trb
== &seg
->trbs
[TRBS_PER_SEGMENT
]) &&
97 (seg
->next
== xhci
->event_ring
->first_seg
);
99 return trb
->link
.control
& LINK_TOGGLE
;
102 /* Is this TRB a link TRB or was the last TRB the last TRB in this event ring
103 * segment? I.e. would the updated event TRB pointer step off the end of the
106 static inline int last_trb(struct xhci_hcd
*xhci
, struct xhci_ring
*ring
,
107 struct xhci_segment
*seg
, union xhci_trb
*trb
)
109 if (ring
== xhci
->event_ring
)
110 return trb
== &seg
->trbs
[TRBS_PER_SEGMENT
];
112 return (trb
->link
.control
& TRB_TYPE_BITMASK
) == TRB_TYPE(TRB_LINK
);
115 /* Updates trb to point to the next TRB in the ring, and updates seg if the next
116 * TRB is in a new segment. This does not skip over link TRBs, and it does not
117 * effect the ring dequeue or enqueue pointers.
119 static void next_trb(struct xhci_hcd
*xhci
,
120 struct xhci_ring
*ring
,
121 struct xhci_segment
**seg
,
122 union xhci_trb
**trb
)
124 if (last_trb(xhci
, ring
, *seg
, *trb
)) {
126 *trb
= ((*seg
)->trbs
);
133 * See Cycle bit rules. SW is the consumer for the event ring only.
134 * Don't make a ring full of link TRBs. That would be dumb and this would loop.
136 static void inc_deq(struct xhci_hcd
*xhci
, struct xhci_ring
*ring
, bool consumer
)
138 union xhci_trb
*next
= ++(ring
->dequeue
);
141 /* Update the dequeue pointer further if that was a link TRB or we're at
142 * the end of an event ring segment (which doesn't have link TRBS)
144 while (last_trb(xhci
, ring
, ring
->deq_seg
, next
)) {
145 if (consumer
&& last_trb_on_last_seg(xhci
, ring
, ring
->deq_seg
, next
)) {
146 ring
->cycle_state
= (ring
->cycle_state
? 0 : 1);
148 xhci_dbg(xhci
, "Toggle cycle state for ring 0x%x = %i\n",
150 (unsigned int) ring
->cycle_state
);
152 ring
->deq_seg
= ring
->deq_seg
->next
;
153 ring
->dequeue
= ring
->deq_seg
->trbs
;
154 next
= ring
->dequeue
;
159 * See Cycle bit rules. SW is the consumer for the event ring only.
160 * Don't make a ring full of link TRBs. That would be dumb and this would loop.
162 * If we've just enqueued a TRB that is in the middle of a TD (meaning the
163 * chain bit is set), then set the chain bit in all the following link TRBs.
164 * If we've enqueued the last TRB in a TD, make sure the following link TRBs
165 * have their chain bit cleared (so that each Link TRB is a separate TD).
167 * Section 6.4.4.1 of the 0.95 spec says link TRBs cannot have the chain bit
168 * set, but other sections talk about dealing with the chain bit set.
169 * Assume section 6.4.4.1 is wrong, and the chain bit can be set in a Link TRB.
171 static void inc_enq(struct xhci_hcd
*xhci
, struct xhci_ring
*ring
, bool consumer
)
174 union xhci_trb
*next
;
176 chain
= ring
->enqueue
->generic
.field
[3] & TRB_CHAIN
;
177 next
= ++(ring
->enqueue
);
180 /* Update the dequeue pointer further if that was a link TRB or we're at
181 * the end of an event ring segment (which doesn't have link TRBS)
183 while (last_trb(xhci
, ring
, ring
->enq_seg
, next
)) {
185 if (ring
!= xhci
->event_ring
) {
186 /* Give this link TRB to the hardware */
187 if (next
->link
.control
& TRB_CYCLE
)
188 next
->link
.control
&= (u32
) ~TRB_CYCLE
;
190 next
->link
.control
|= (u32
) TRB_CYCLE
;
191 next
->link
.control
&= TRB_CHAIN
;
192 next
->link
.control
|= chain
;
194 /* Toggle the cycle bit after the last ring segment. */
195 if (last_trb_on_last_seg(xhci
, ring
, ring
->enq_seg
, next
)) {
196 ring
->cycle_state
= (ring
->cycle_state
? 0 : 1);
198 xhci_dbg(xhci
, "Toggle cycle state for ring 0x%x = %i\n",
200 (unsigned int) ring
->cycle_state
);
203 ring
->enq_seg
= ring
->enq_seg
->next
;
204 ring
->enqueue
= ring
->enq_seg
->trbs
;
205 next
= ring
->enqueue
;
210 * Check to see if there's room to enqueue num_trbs on the ring. See rules
212 * FIXME: this would be simpler and faster if we just kept track of the number
213 * of free TRBs in a ring.
215 static int room_on_ring(struct xhci_hcd
*xhci
, struct xhci_ring
*ring
,
216 unsigned int num_trbs
)
219 union xhci_trb
*enq
= ring
->enqueue
;
220 struct xhci_segment
*enq_seg
= ring
->enq_seg
;
222 /* Check if ring is empty */
223 if (enq
== ring
->dequeue
)
225 /* Make sure there's an extra empty TRB available */
226 for (i
= 0; i
<= num_trbs
; ++i
) {
227 if (enq
== ring
->dequeue
)
230 while (last_trb(xhci
, ring
, enq_seg
, enq
)) {
231 enq_seg
= enq_seg
->next
;
238 void set_hc_event_deq(struct xhci_hcd
*xhci
)
243 deq
= trb_virt_to_dma(xhci
->event_ring
->deq_seg
,
244 xhci
->event_ring
->dequeue
);
245 if (deq
== 0 && !in_interrupt())
246 xhci_warn(xhci
, "WARN something wrong with SW event ring "
248 /* Update HC event ring dequeue pointer */
249 temp
= xhci_readl(xhci
, &xhci
->ir_set
->erst_dequeue
[0]);
250 temp
&= ERST_PTR_MASK
;
252 xhci_dbg(xhci
, "// Write event ring dequeue pointer\n");
253 xhci_writel(xhci
, 0, &xhci
->ir_set
->erst_dequeue
[1]);
254 xhci_writel(xhci
, (deq
& ~ERST_PTR_MASK
) | temp
,
255 &xhci
->ir_set
->erst_dequeue
[0]);
258 /* Ring the host controller doorbell after placing a command on the ring */
259 void ring_cmd_db(struct xhci_hcd
*xhci
)
263 xhci_dbg(xhci
, "// Ding dong!\n");
264 temp
= xhci_readl(xhci
, &xhci
->dba
->doorbell
[0]) & DB_MASK
;
265 xhci_writel(xhci
, temp
| DB_TARGET_HOST
, &xhci
->dba
->doorbell
[0]);
266 /* Flush PCI posted writes */
267 xhci_readl(xhci
, &xhci
->dba
->doorbell
[0]);
270 static void ring_ep_doorbell(struct xhci_hcd
*xhci
,
271 unsigned int slot_id
,
272 unsigned int ep_index
)
274 struct xhci_ring
*ep_ring
;
276 __u32 __iomem
*db_addr
= &xhci
->dba
->doorbell
[slot_id
];
278 ep_ring
= xhci
->devs
[slot_id
]->ep_rings
[ep_index
];
279 /* Don't ring the doorbell for this endpoint if there are pending
280 * cancellations because the we don't want to interrupt processing.
282 if (!ep_ring
->cancels_pending
&& !(ep_ring
->state
& SET_DEQ_PENDING
)) {
283 field
= xhci_readl(xhci
, db_addr
) & DB_MASK
;
284 xhci_writel(xhci
, field
| EPI_TO_DB(ep_index
), db_addr
);
285 /* Flush PCI posted writes - FIXME Matthew Wilcox says this
286 * isn't time-critical and we shouldn't make the CPU wait for
289 xhci_readl(xhci
, db_addr
);
294 * Find the segment that trb is in. Start searching in start_seg.
295 * If we must move past a segment that has a link TRB with a toggle cycle state
296 * bit set, then we will toggle the value pointed at by cycle_state.
298 static struct xhci_segment
*find_trb_seg(
299 struct xhci_segment
*start_seg
,
300 union xhci_trb
*trb
, int *cycle_state
)
302 struct xhci_segment
*cur_seg
= start_seg
;
303 struct xhci_generic_trb
*generic_trb
;
305 while (cur_seg
->trbs
> trb
||
306 &cur_seg
->trbs
[TRBS_PER_SEGMENT
- 1] < trb
) {
307 generic_trb
= &cur_seg
->trbs
[TRBS_PER_SEGMENT
- 1].generic
;
308 if (TRB_TYPE(generic_trb
->field
[3]) == TRB_LINK
&&
309 (generic_trb
->field
[3] & LINK_TOGGLE
))
310 *cycle_state
= ~(*cycle_state
) & 0x1;
311 cur_seg
= cur_seg
->next
;
312 if (cur_seg
== start_seg
)
313 /* Looped over the entire list. Oops! */
319 struct dequeue_state
{
320 struct xhci_segment
*new_deq_seg
;
321 union xhci_trb
*new_deq_ptr
;
326 * Move the xHC's endpoint ring dequeue pointer past cur_td.
327 * Record the new state of the xHC's endpoint ring dequeue segment,
328 * dequeue pointer, and new consumer cycle state in state.
329 * Update our internal representation of the ring's dequeue pointer.
331 * We do this in three jumps:
332 * - First we update our new ring state to be the same as when the xHC stopped.
333 * - Then we traverse the ring to find the segment that contains
334 * the last TRB in the TD. We toggle the xHC's new cycle state when we pass
335 * any link TRBs with the toggle cycle bit set.
336 * - Finally we move the dequeue state one TRB further, toggling the cycle bit
337 * if we've moved it past a link TRB with the toggle cycle bit set.
339 static void find_new_dequeue_state(struct xhci_hcd
*xhci
,
340 unsigned int slot_id
, unsigned int ep_index
,
341 struct xhci_td
*cur_td
, struct dequeue_state
*state
)
343 struct xhci_virt_device
*dev
= xhci
->devs
[slot_id
];
344 struct xhci_ring
*ep_ring
= dev
->ep_rings
[ep_index
];
345 struct xhci_generic_trb
*trb
;
347 state
->new_cycle_state
= 0;
348 state
->new_deq_seg
= find_trb_seg(cur_td
->start_seg
,
349 ep_ring
->stopped_trb
,
350 &state
->new_cycle_state
);
351 if (!state
->new_deq_seg
)
353 /* Dig out the cycle state saved by the xHC during the stop ep cmd */
354 state
->new_cycle_state
= 0x1 & dev
->out_ctx
->ep
[ep_index
].deq
[0];
356 state
->new_deq_ptr
= cur_td
->last_trb
;
357 state
->new_deq_seg
= find_trb_seg(state
->new_deq_seg
,
359 &state
->new_cycle_state
);
360 if (!state
->new_deq_seg
)
363 trb
= &state
->new_deq_ptr
->generic
;
364 if (TRB_TYPE(trb
->field
[3]) == TRB_LINK
&&
365 (trb
->field
[3] & LINK_TOGGLE
))
366 state
->new_cycle_state
= ~(state
->new_cycle_state
) & 0x1;
367 next_trb(xhci
, ep_ring
, &state
->new_deq_seg
, &state
->new_deq_ptr
);
369 /* Don't update the ring cycle state for the producer (us). */
370 ep_ring
->dequeue
= state
->new_deq_ptr
;
371 ep_ring
->deq_seg
= state
->new_deq_seg
;
374 void td_to_noop(struct xhci_hcd
*xhci
, struct xhci_ring
*ep_ring
,
375 struct xhci_td
*cur_td
)
377 struct xhci_segment
*cur_seg
;
378 union xhci_trb
*cur_trb
;
380 for (cur_seg
= cur_td
->start_seg
, cur_trb
= cur_td
->first_trb
;
382 next_trb(xhci
, ep_ring
, &cur_seg
, &cur_trb
)) {
383 if ((cur_trb
->generic
.field
[3] & TRB_TYPE_BITMASK
) ==
384 TRB_TYPE(TRB_LINK
)) {
385 /* Unchain any chained Link TRBs, but
386 * leave the pointers intact.
388 cur_trb
->generic
.field
[3] &= ~TRB_CHAIN
;
389 xhci_dbg(xhci
, "Cancel (unchain) link TRB\n");
390 xhci_dbg(xhci
, "Address = 0x%x (0x%x dma); "
391 "in seg 0x%x (0x%x dma)\n",
392 (unsigned int) cur_trb
,
393 trb_virt_to_dma(cur_seg
, cur_trb
),
394 (unsigned int) cur_seg
,
397 cur_trb
->generic
.field
[0] = 0;
398 cur_trb
->generic
.field
[1] = 0;
399 cur_trb
->generic
.field
[2] = 0;
400 /* Preserve only the cycle bit of this TRB */
401 cur_trb
->generic
.field
[3] &= TRB_CYCLE
;
402 cur_trb
->generic
.field
[3] |= TRB_TYPE(TRB_TR_NOOP
);
403 xhci_dbg(xhci
, "Cancel TRB 0x%x (0x%x dma) "
404 "in seg 0x%x (0x%x dma)\n",
405 (unsigned int) cur_trb
,
406 trb_virt_to_dma(cur_seg
, cur_trb
),
407 (unsigned int) cur_seg
,
410 if (cur_trb
== cur_td
->last_trb
)
415 static int queue_set_tr_deq(struct xhci_hcd
*xhci
, int slot_id
,
416 unsigned int ep_index
, struct xhci_segment
*deq_seg
,
417 union xhci_trb
*deq_ptr
, u32 cycle_state
);
420 * When we get a command completion for a Stop Endpoint Command, we need to
421 * unlink any cancelled TDs from the ring. There are two ways to do that:
423 * 1. If the HW was in the middle of processing the TD that needs to be
424 * cancelled, then we must move the ring's dequeue pointer past the last TRB
425 * in the TD with a Set Dequeue Pointer Command.
426 * 2. Otherwise, we turn all the TRBs in the TD into No-op TRBs (with the chain
427 * bit cleared) so that the HW will skip over them.
429 static void handle_stopped_endpoint(struct xhci_hcd
*xhci
,
432 unsigned int slot_id
;
433 unsigned int ep_index
;
434 struct xhci_ring
*ep_ring
;
435 struct list_head
*entry
;
436 struct xhci_td
*cur_td
= 0;
437 struct xhci_td
*last_unlinked_td
;
439 struct dequeue_state deq_state
;
440 #ifdef CONFIG_USB_HCD_STAT
441 ktime_t stop_time
= ktime_get();
444 memset(&deq_state
, 0, sizeof(deq_state
));
445 slot_id
= TRB_TO_SLOT_ID(trb
->generic
.field
[3]);
446 ep_index
= TRB_TO_EP_INDEX(trb
->generic
.field
[3]);
447 ep_ring
= xhci
->devs
[slot_id
]->ep_rings
[ep_index
];
449 if (list_empty(&ep_ring
->cancelled_td_list
))
452 /* Fix up the ep ring first, so HW stops executing cancelled TDs.
453 * We have the xHCI lock, so nothing can modify this list until we drop
454 * it. We're also in the event handler, so we can't get re-interrupted
455 * if another Stop Endpoint command completes
457 list_for_each(entry
, &ep_ring
->cancelled_td_list
) {
458 cur_td
= list_entry(entry
, struct xhci_td
, cancelled_td_list
);
459 xhci_dbg(xhci
, "Cancelling TD starting at 0x%x, 0x%x (dma).\n",
460 (unsigned int) cur_td
->first_trb
,
461 trb_virt_to_dma(cur_td
->start_seg
, cur_td
->first_trb
));
463 * If we stopped on the TD we need to cancel, then we have to
464 * move the xHC endpoint ring dequeue pointer past this TD.
466 if (cur_td
== ep_ring
->stopped_td
)
467 find_new_dequeue_state(xhci
, slot_id
, ep_index
, cur_td
,
470 td_to_noop(xhci
, ep_ring
, cur_td
);
472 * The event handler won't see a completion for this TD anymore,
473 * so remove it from the endpoint ring's TD list. Keep it in
474 * the cancelled TD list for URB completion later.
476 list_del(&cur_td
->td_list
);
477 ep_ring
->cancels_pending
--;
479 last_unlinked_td
= cur_td
;
481 /* If necessary, queue a Set Transfer Ring Dequeue Pointer command */
482 if (deq_state
.new_deq_ptr
&& deq_state
.new_deq_seg
) {
483 xhci_dbg(xhci
, "Set TR Deq Ptr cmd, new deq seg = 0x%x (0x%x dma), "
484 "new deq ptr = 0x%x (0x%x dma), new cycle = %u\n",
485 (unsigned int) deq_state
.new_deq_seg
,
486 deq_state
.new_deq_seg
->dma
,
487 (unsigned int) deq_state
.new_deq_ptr
,
488 trb_virt_to_dma(deq_state
.new_deq_seg
, deq_state
.new_deq_ptr
),
489 deq_state
.new_cycle_state
);
490 queue_set_tr_deq(xhci
, slot_id
, ep_index
,
491 deq_state
.new_deq_seg
,
492 deq_state
.new_deq_ptr
,
493 (u32
) deq_state
.new_cycle_state
);
494 /* Stop the TD queueing code from ringing the doorbell until
495 * this command completes. The HC won't set the dequeue pointer
496 * if the ring is running, and ringing the doorbell starts the
499 ep_ring
->state
|= SET_DEQ_PENDING
;
502 /* Otherwise just ring the doorbell to restart the ring */
503 ring_ep_doorbell(xhci
, slot_id
, ep_index
);
507 * Drop the lock and complete the URBs in the cancelled TD list.
508 * New TDs to be cancelled might be added to the end of the list before
509 * we can complete all the URBs for the TDs we already unlinked.
510 * So stop when we've completed the URB for the last TD we unlinked.
513 cur_td
= list_entry(ep_ring
->cancelled_td_list
.next
,
514 struct xhci_td
, cancelled_td_list
);
515 list_del(&cur_td
->cancelled_td_list
);
517 /* Clean up the cancelled URB */
518 #ifdef CONFIG_USB_HCD_STAT
519 hcd_stat_update(xhci
->tp_stat
, cur_td
->urb
->actual_length
,
520 ktime_sub(stop_time
, cur_td
->start_time
));
522 cur_td
->urb
->hcpriv
= NULL
;
523 usb_hcd_unlink_urb_from_ep(xhci_to_hcd(xhci
), cur_td
->urb
);
525 xhci_dbg(xhci
, "Giveback cancelled URB 0x%x\n",
526 (unsigned int) cur_td
->urb
);
527 spin_unlock(&xhci
->lock
);
528 /* Doesn't matter what we pass for status, since the core will
529 * just overwrite it (because the URB has been unlinked).
531 usb_hcd_giveback_urb(xhci_to_hcd(xhci
), cur_td
->urb
, 0);
534 spin_lock(&xhci
->lock
);
535 } while (cur_td
!= last_unlinked_td
);
537 /* Return to the event handler with xhci->lock re-acquired */
541 * When we get a completion for a Set Transfer Ring Dequeue Pointer command,
542 * we need to clear the set deq pending flag in the endpoint ring state, so that
543 * the TD queueing code can ring the doorbell again. We also need to ring the
544 * endpoint doorbell to restart the ring, but only if there aren't more
545 * cancellations pending.
547 static void handle_set_deq_completion(struct xhci_hcd
*xhci
,
548 struct xhci_event_cmd
*event
,
551 unsigned int slot_id
;
552 unsigned int ep_index
;
553 struct xhci_ring
*ep_ring
;
554 struct xhci_virt_device
*dev
;
556 slot_id
= TRB_TO_SLOT_ID(trb
->generic
.field
[3]);
557 ep_index
= TRB_TO_EP_INDEX(trb
->generic
.field
[3]);
558 dev
= xhci
->devs
[slot_id
];
559 ep_ring
= dev
->ep_rings
[ep_index
];
561 if (GET_COMP_CODE(event
->status
) != COMP_SUCCESS
) {
562 unsigned int ep_state
;
563 unsigned int slot_state
;
565 switch (GET_COMP_CODE(event
->status
)) {
567 xhci_warn(xhci
, "WARN Set TR Deq Ptr cmd invalid because "
568 "of stream ID configuration\n");
571 xhci_warn(xhci
, "WARN Set TR Deq Ptr cmd failed due "
572 "to incorrect slot or ep state.\n");
573 ep_state
= dev
->out_ctx
->ep
[ep_index
].ep_info
;
574 ep_state
&= EP_STATE_MASK
;
575 slot_state
= dev
->out_ctx
->slot
.dev_state
;
576 slot_state
= GET_SLOT_STATE(slot_state
);
577 xhci_dbg(xhci
, "Slot state = %u, EP state = %u\n",
578 slot_state
, ep_state
);
581 xhci_warn(xhci
, "WARN Set TR Deq Ptr cmd failed because "
582 "slot %u was not enabled.\n", slot_id
);
585 xhci_warn(xhci
, "WARN Set TR Deq Ptr cmd with unknown "
586 "completion code of %u.\n",
587 GET_COMP_CODE(event
->status
));
590 /* OK what do we do now? The endpoint state is hosed, and we
591 * should never get to this point if the synchronization between
592 * queueing, and endpoint state are correct. This might happen
593 * if the device gets disconnected after we've finished
594 * cancelling URBs, which might not be an error...
597 xhci_dbg(xhci
, "Successful Set TR Deq Ptr cmd, deq[0] = 0x%x, "
599 dev
->out_ctx
->ep
[ep_index
].deq
[0],
600 dev
->out_ctx
->ep
[ep_index
].deq
[1]);
603 ep_ring
->state
&= ~SET_DEQ_PENDING
;
604 ring_ep_doorbell(xhci
, slot_id
, ep_index
);
608 static void handle_cmd_completion(struct xhci_hcd
*xhci
,
609 struct xhci_event_cmd
*event
)
611 int slot_id
= TRB_TO_SLOT_ID(event
->flags
);
613 dma_addr_t cmd_dequeue_dma
;
615 cmd_dma
= (((u64
) event
->cmd_trb
[1]) << 32) + event
->cmd_trb
[0];
616 cmd_dequeue_dma
= trb_virt_to_dma(xhci
->cmd_ring
->deq_seg
,
617 xhci
->cmd_ring
->dequeue
);
618 /* Is the command ring deq ptr out of sync with the deq seg ptr? */
619 if (cmd_dequeue_dma
== 0) {
620 xhci
->error_bitmask
|= 1 << 4;
623 /* Does the DMA address match our internal dequeue pointer address? */
624 if (cmd_dma
!= (u64
) cmd_dequeue_dma
) {
625 xhci
->error_bitmask
|= 1 << 5;
628 switch (xhci
->cmd_ring
->dequeue
->generic
.field
[3] & TRB_TYPE_BITMASK
) {
629 case TRB_TYPE(TRB_ENABLE_SLOT
):
630 if (GET_COMP_CODE(event
->status
) == COMP_SUCCESS
)
631 xhci
->slot_id
= slot_id
;
634 complete(&xhci
->addr_dev
);
636 case TRB_TYPE(TRB_DISABLE_SLOT
):
637 if (xhci
->devs
[slot_id
])
638 xhci_free_virt_device(xhci
, slot_id
);
640 case TRB_TYPE(TRB_CONFIG_EP
):
641 xhci
->devs
[slot_id
]->cmd_status
= GET_COMP_CODE(event
->status
);
642 complete(&xhci
->devs
[slot_id
]->cmd_completion
);
644 case TRB_TYPE(TRB_ADDR_DEV
):
645 xhci
->devs
[slot_id
]->cmd_status
= GET_COMP_CODE(event
->status
);
646 complete(&xhci
->addr_dev
);
648 case TRB_TYPE(TRB_STOP_RING
):
649 handle_stopped_endpoint(xhci
, xhci
->cmd_ring
->dequeue
);
651 case TRB_TYPE(TRB_SET_DEQ
):
652 handle_set_deq_completion(xhci
, event
, xhci
->cmd_ring
->dequeue
);
654 case TRB_TYPE(TRB_CMD_NOOP
):
655 ++xhci
->noops_handled
;
658 /* Skip over unknown commands on the event ring */
659 xhci
->error_bitmask
|= 1 << 6;
662 inc_deq(xhci
, xhci
->cmd_ring
, false);
665 static void handle_port_status(struct xhci_hcd
*xhci
,
666 union xhci_trb
*event
)
670 /* Port status change events always have a successful completion code */
671 if (GET_COMP_CODE(event
->generic
.field
[2]) != COMP_SUCCESS
) {
672 xhci_warn(xhci
, "WARN: xHC returned failed port status event\n");
673 xhci
->error_bitmask
|= 1 << 8;
675 /* FIXME: core doesn't care about all port link state changes yet */
676 port_id
= GET_PORT_ID(event
->generic
.field
[0]);
677 xhci_dbg(xhci
, "Port Status Change Event for port %d\n", port_id
);
679 /* Update event ring dequeue pointer before dropping the lock */
680 inc_deq(xhci
, xhci
->event_ring
, true);
681 set_hc_event_deq(xhci
);
683 spin_unlock(&xhci
->lock
);
684 /* Pass this up to the core */
685 usb_hcd_poll_rh_status(xhci_to_hcd(xhci
));
686 spin_lock(&xhci
->lock
);
690 * This TD is defined by the TRBs starting at start_trb in start_seg and ending
691 * at end_trb, which may be in another segment. If the suspect DMA address is a
692 * TRB in this TD, this function returns that TRB's segment. Otherwise it
695 static struct xhci_segment
*trb_in_td(
696 struct xhci_segment
*start_seg
,
697 union xhci_trb
*start_trb
,
698 union xhci_trb
*end_trb
,
699 dma_addr_t suspect_dma
)
701 dma_addr_t start_dma
;
702 dma_addr_t end_seg_dma
;
703 dma_addr_t end_trb_dma
;
704 struct xhci_segment
*cur_seg
;
706 start_dma
= trb_virt_to_dma(start_seg
, start_trb
);
710 /* We may get an event for a Link TRB in the middle of a TD */
711 end_seg_dma
= trb_virt_to_dma(cur_seg
,
712 &start_seg
->trbs
[TRBS_PER_SEGMENT
- 1]);
713 /* If the end TRB isn't in this segment, this is set to 0 */
714 end_trb_dma
= trb_virt_to_dma(cur_seg
, end_trb
);
716 if (end_trb_dma
> 0) {
717 /* The end TRB is in this segment, so suspect should be here */
718 if (start_dma
<= end_trb_dma
) {
719 if (suspect_dma
>= start_dma
&& suspect_dma
<= end_trb_dma
)
722 /* Case for one segment with
723 * a TD wrapped around to the top
725 if ((suspect_dma
>= start_dma
&&
726 suspect_dma
<= end_seg_dma
) ||
727 (suspect_dma
>= cur_seg
->dma
&&
728 suspect_dma
<= end_trb_dma
))
733 /* Might still be somewhere in this segment */
734 if (suspect_dma
>= start_dma
&& suspect_dma
<= end_seg_dma
)
737 cur_seg
= cur_seg
->next
;
738 start_dma
= trb_virt_to_dma(cur_seg
, &cur_seg
->trbs
[0]);
744 * If this function returns an error condition, it means it got a Transfer
745 * event with a corrupted Slot ID, Endpoint ID, or TRB DMA address.
746 * At this point, the host controller is probably hosed and should be reset.
748 static int handle_tx_event(struct xhci_hcd
*xhci
,
749 struct xhci_transfer_event
*event
)
751 struct xhci_virt_device
*xdev
;
752 struct xhci_ring
*ep_ring
;
754 struct xhci_td
*td
= 0;
755 dma_addr_t event_dma
;
756 struct xhci_segment
*event_seg
;
757 union xhci_trb
*event_trb
;
759 int status
= -EINPROGRESS
;
761 xdev
= xhci
->devs
[TRB_TO_SLOT_ID(event
->flags
)];
763 xhci_err(xhci
, "ERROR Transfer event pointed to bad slot\n");
767 /* Endpoint ID is 1 based, our index is zero based */
768 ep_index
= TRB_TO_EP_ID(event
->flags
) - 1;
769 ep_ring
= xdev
->ep_rings
[ep_index
];
770 if (!ep_ring
|| (xdev
->out_ctx
->ep
[ep_index
].ep_info
& EP_STATE_MASK
) == EP_STATE_DISABLED
) {
771 xhci_err(xhci
, "ERROR Transfer event pointed to disabled endpoint\n");
775 event_dma
= event
->buffer
[0];
776 if (event
->buffer
[1] != 0)
777 xhci_warn(xhci
, "WARN ignoring upper 32-bits of 64-bit TRB dma address\n");
779 /* This TRB should be in the TD at the head of this ring's TD list */
780 if (list_empty(&ep_ring
->td_list
)) {
781 xhci_warn(xhci
, "WARN Event TRB for slot %d ep %d with no TDs queued?\n",
782 TRB_TO_SLOT_ID(event
->flags
), ep_index
);
783 xhci_dbg(xhci
, "Event TRB with TRB type ID %u\n",
784 (unsigned int) (event
->flags
& TRB_TYPE_BITMASK
)>>10);
785 xhci_print_trb_offsets(xhci
, (union xhci_trb
*) event
);
789 td
= list_entry(ep_ring
->td_list
.next
, struct xhci_td
, td_list
);
791 /* Is this a TRB in the currently executing TD? */
792 event_seg
= trb_in_td(ep_ring
->deq_seg
, ep_ring
->dequeue
,
793 td
->last_trb
, event_dma
);
795 /* HC is busted, give up! */
796 xhci_err(xhci
, "ERROR Transfer event TRB DMA ptr not part of current TD\n");
799 event_trb
= &event_seg
->trbs
[(event_dma
- event_seg
->dma
) / sizeof(*event_trb
)];
800 xhci_dbg(xhci
, "Event TRB with TRB type ID %u\n",
801 (unsigned int) (event
->flags
& TRB_TYPE_BITMASK
)>>10);
802 xhci_dbg(xhci
, "Offset 0x00 (buffer[0]) = 0x%x\n",
803 (unsigned int) event
->buffer
[0]);
804 xhci_dbg(xhci
, "Offset 0x04 (buffer[0]) = 0x%x\n",
805 (unsigned int) event
->buffer
[1]);
806 xhci_dbg(xhci
, "Offset 0x08 (transfer length) = 0x%x\n",
807 (unsigned int) event
->transfer_len
);
808 xhci_dbg(xhci
, "Offset 0x0C (flags) = 0x%x\n",
809 (unsigned int) event
->flags
);
811 /* Look for common error cases */
812 switch (GET_COMP_CODE(event
->transfer_len
)) {
813 /* Skip codes that require special handling depending on
820 xhci_dbg(xhci
, "Stopped on Transfer TRB\n");
822 case COMP_STOP_INVAL
:
823 xhci_dbg(xhci
, "Stopped on No-op or Link TRB\n");
826 xhci_warn(xhci
, "WARN: Stalled endpoint\n");
830 xhci_warn(xhci
, "WARN: TRB error on endpoint\n");
834 xhci_warn(xhci
, "WARN: transfer error on endpoint\n");
838 xhci_warn(xhci
, "WARN: HC couldn't access mem fast enough\n");
842 xhci_warn(xhci
, "ERROR Unknown event condition, HC probably busted\n");
846 /* Now update the urb's actual_length and give back to the core */
847 /* Was this a control transfer? */
848 if (usb_endpoint_xfer_control(&td
->urb
->ep
->desc
)) {
849 xhci_debug_trb(xhci
, xhci
->event_ring
->dequeue
);
850 switch (GET_COMP_CODE(event
->transfer_len
)) {
852 if (event_trb
== ep_ring
->dequeue
) {
853 xhci_warn(xhci
, "WARN: Success on ctrl setup TRB without IOC set??\n");
855 } else if (event_trb
!= td
->last_trb
) {
856 xhci_warn(xhci
, "WARN: Success on ctrl data TRB without IOC set??\n");
859 xhci_dbg(xhci
, "Successful control transfer!\n");
864 xhci_warn(xhci
, "WARN: short transfer on control ep\n");
868 /* Others already handled above */
872 * Did we transfer any data, despite the errors that might have
873 * happened? I.e. did we get past the setup stage?
875 if (event_trb
!= ep_ring
->dequeue
) {
876 /* The event was for the status stage */
877 if (event_trb
== td
->last_trb
) {
878 td
->urb
->actual_length
=
879 td
->urb
->transfer_buffer_length
;
881 /* Maybe the event was for the data stage? */
882 if (GET_COMP_CODE(event
->transfer_len
) != COMP_STOP_INVAL
)
883 /* We didn't stop on a link TRB in the middle */
884 td
->urb
->actual_length
=
885 td
->urb
->transfer_buffer_length
-
886 TRB_LEN(event
->transfer_len
);
890 switch (GET_COMP_CODE(event
->transfer_len
)) {
892 /* Double check that the HW transferred everything. */
893 if (event_trb
!= td
->last_trb
) {
894 xhci_warn(xhci
, "WARN Successful completion "
896 if (td
->urb
->transfer_flags
& URB_SHORT_NOT_OK
)
901 xhci_dbg(xhci
, "Successful bulk transfer!\n");
906 if (td
->urb
->transfer_flags
& URB_SHORT_NOT_OK
)
912 /* Others already handled above */
915 dev_dbg(&td
->urb
->dev
->dev
,
916 "ep %#x - asked for %d bytes, "
917 "%d bytes untransferred\n",
918 td
->urb
->ep
->desc
.bEndpointAddress
,
919 td
->urb
->transfer_buffer_length
,
920 TRB_LEN(event
->transfer_len
));
921 /* Fast path - was this the last TRB in the TD for this URB? */
922 if (event_trb
== td
->last_trb
) {
923 if (TRB_LEN(event
->transfer_len
) != 0) {
924 td
->urb
->actual_length
=
925 td
->urb
->transfer_buffer_length
-
926 TRB_LEN(event
->transfer_len
);
927 if (td
->urb
->actual_length
< 0) {
928 xhci_warn(xhci
, "HC gave bad length "
929 "of %d bytes left\n",
930 TRB_LEN(event
->transfer_len
));
931 td
->urb
->actual_length
= 0;
933 if (td
->urb
->transfer_flags
& URB_SHORT_NOT_OK
)
938 td
->urb
->actual_length
= td
->urb
->transfer_buffer_length
;
939 /* Ignore a short packet completion if the
940 * untransferred length was zero.
945 /* Slow path - walk the list, starting from the dequeue
946 * pointer, to get the actual length transferred.
948 union xhci_trb
*cur_trb
;
949 struct xhci_segment
*cur_seg
;
951 td
->urb
->actual_length
= 0;
952 for (cur_trb
= ep_ring
->dequeue
, cur_seg
= ep_ring
->deq_seg
;
953 cur_trb
!= event_trb
;
954 next_trb(xhci
, ep_ring
, &cur_seg
, &cur_trb
)) {
955 if (TRB_TYPE(cur_trb
->generic
.field
[3]) != TRB_TR_NOOP
&&
956 TRB_TYPE(cur_trb
->generic
.field
[3]) != TRB_LINK
)
957 td
->urb
->actual_length
+=
958 TRB_LEN(cur_trb
->generic
.field
[2]);
960 /* If the ring didn't stop on a Link or No-op TRB, add
961 * in the actual bytes transferred from the Normal TRB
963 if (GET_COMP_CODE(event
->transfer_len
) != COMP_STOP_INVAL
)
964 td
->urb
->actual_length
+=
965 TRB_LEN(cur_trb
->generic
.field
[2]) -
966 TRB_LEN(event
->transfer_len
);
969 /* The Endpoint Stop Command completion will take care of
970 * any stopped TDs. A stopped TD may be restarted, so don't update the
971 * ring dequeue pointer or take this TD off any lists yet.
973 if (GET_COMP_CODE(event
->transfer_len
) == COMP_STOP_INVAL
||
974 GET_COMP_CODE(event
->transfer_len
) == COMP_STOP
) {
975 ep_ring
->stopped_td
= td
;
976 ep_ring
->stopped_trb
= event_trb
;
978 /* Update ring dequeue pointer */
979 while (ep_ring
->dequeue
!= td
->last_trb
)
980 inc_deq(xhci
, ep_ring
, false);
981 inc_deq(xhci
, ep_ring
, false);
983 /* Clean up the endpoint's TD list */
985 list_del(&td
->td_list
);
986 /* Was this TD slated to be cancelled but completed anyway? */
987 if (!list_empty(&td
->cancelled_td_list
)) {
988 list_del(&td
->cancelled_td_list
);
989 ep_ring
->cancels_pending
--;
995 inc_deq(xhci
, xhci
->event_ring
, true);
996 set_hc_event_deq(xhci
);
998 /* FIXME for multi-TD URBs (who have buffers bigger than 64MB) */
1000 usb_hcd_unlink_urb_from_ep(xhci_to_hcd(xhci
), urb
);
1001 spin_unlock(&xhci
->lock
);
1002 usb_hcd_giveback_urb(xhci_to_hcd(xhci
), urb
, status
);
1003 spin_lock(&xhci
->lock
);
1009 * This function handles all OS-owned events on the event ring. It may drop
1010 * xhci->lock between event processing (e.g. to pass up port status changes).
1012 void handle_event(struct xhci_hcd
*xhci
)
1014 union xhci_trb
*event
;
1015 int update_ptrs
= 1;
1018 if (!xhci
->event_ring
|| !xhci
->event_ring
->dequeue
) {
1019 xhci
->error_bitmask
|= 1 << 1;
1023 event
= xhci
->event_ring
->dequeue
;
1024 /* Does the HC or OS own the TRB? */
1025 if ((event
->event_cmd
.flags
& TRB_CYCLE
) !=
1026 xhci
->event_ring
->cycle_state
) {
1027 xhci
->error_bitmask
|= 1 << 2;
1031 /* FIXME: Handle more event types. */
1032 switch ((event
->event_cmd
.flags
& TRB_TYPE_BITMASK
)) {
1033 case TRB_TYPE(TRB_COMPLETION
):
1034 handle_cmd_completion(xhci
, &event
->event_cmd
);
1036 case TRB_TYPE(TRB_PORT_STATUS
):
1037 handle_port_status(xhci
, event
);
1040 case TRB_TYPE(TRB_TRANSFER
):
1041 ret
= handle_tx_event(xhci
, &event
->trans_event
);
1043 xhci
->error_bitmask
|= 1 << 9;
1048 xhci
->error_bitmask
|= 1 << 3;
1052 /* Update SW and HC event ring dequeue pointer */
1053 inc_deq(xhci
, xhci
->event_ring
, true);
1054 set_hc_event_deq(xhci
);
1056 /* Are there more items on the event ring? */
1060 /**** Endpoint Ring Operations ****/
1063 * Generic function for queueing a TRB on a ring.
1064 * The caller must have checked to make sure there's room on the ring.
1066 static void queue_trb(struct xhci_hcd
*xhci
, struct xhci_ring
*ring
,
1068 u32 field1
, u32 field2
, u32 field3
, u32 field4
)
1070 struct xhci_generic_trb
*trb
;
1072 trb
= &ring
->enqueue
->generic
;
1073 trb
->field
[0] = field1
;
1074 trb
->field
[1] = field2
;
1075 trb
->field
[2] = field3
;
1076 trb
->field
[3] = field4
;
1077 inc_enq(xhci
, ring
, consumer
);
1081 * Does various checks on the endpoint ring, and makes it ready to queue num_trbs.
1082 * FIXME allocate segments if the ring is full.
1084 static int prepare_ring(struct xhci_hcd
*xhci
, struct xhci_ring
*ep_ring
,
1085 u32 ep_state
, unsigned int num_trbs
, gfp_t mem_flags
)
1087 /* Make sure the endpoint has been added to xHC schedule */
1088 xhci_dbg(xhci
, "Endpoint state = 0x%x\n", ep_state
);
1090 case EP_STATE_DISABLED
:
1092 * USB core changed config/interfaces without notifying us,
1093 * or hardware is reporting the wrong state.
1095 xhci_warn(xhci
, "WARN urb submitted to disabled ep\n");
1097 case EP_STATE_HALTED
:
1098 case EP_STATE_ERROR
:
1099 xhci_warn(xhci
, "WARN waiting for halt or error on ep "
1101 /* FIXME event handling code for error needs to clear it */
1102 /* XXX not sure if this should be -ENOENT or not */
1104 case EP_STATE_STOPPED
:
1105 case EP_STATE_RUNNING
:
1108 xhci_err(xhci
, "ERROR unknown endpoint state for ep\n");
1110 * FIXME issue Configure Endpoint command to try to get the HC
1111 * back into a known state.
1115 if (!room_on_ring(xhci
, ep_ring
, num_trbs
)) {
1116 /* FIXME allocate more room */
1117 xhci_err(xhci
, "ERROR no room on ep ring\n");
1123 int xhci_prepare_transfer(struct xhci_hcd
*xhci
,
1124 struct xhci_virt_device
*xdev
,
1125 unsigned int ep_index
,
1126 unsigned int num_trbs
,
1128 struct xhci_td
**td
,
1133 ret
= prepare_ring(xhci
, xdev
->ep_rings
[ep_index
],
1134 xdev
->out_ctx
->ep
[ep_index
].ep_info
& EP_STATE_MASK
,
1135 num_trbs
, mem_flags
);
1138 *td
= kzalloc(sizeof(struct xhci_td
), mem_flags
);
1141 INIT_LIST_HEAD(&(*td
)->td_list
);
1142 INIT_LIST_HEAD(&(*td
)->cancelled_td_list
);
1144 ret
= usb_hcd_link_urb_to_ep(xhci_to_hcd(xhci
), urb
);
1145 if (unlikely(ret
)) {
1151 urb
->hcpriv
= (void *) (*td
);
1152 /* Add this TD to the tail of the endpoint ring's TD list */
1153 list_add_tail(&(*td
)->td_list
, &xdev
->ep_rings
[ep_index
]->td_list
);
1154 (*td
)->start_seg
= xdev
->ep_rings
[ep_index
]->enq_seg
;
1155 (*td
)->first_trb
= xdev
->ep_rings
[ep_index
]->enqueue
;
1160 unsigned int count_sg_trbs_needed(struct xhci_hcd
*xhci
, struct urb
*urb
)
1162 int num_sgs
, num_trbs
, running_total
, temp
, i
;
1163 struct scatterlist
*sg
;
1166 num_sgs
= urb
->num_sgs
;
1167 temp
= urb
->transfer_buffer_length
;
1169 xhci_dbg(xhci
, "count sg list trbs: \n");
1171 for_each_sg(urb
->sg
->sg
, sg
, num_sgs
, i
) {
1172 unsigned int previous_total_trbs
= num_trbs
;
1173 unsigned int len
= sg_dma_len(sg
);
1175 /* Scatter gather list entries may cross 64KB boundaries */
1176 running_total
= TRB_MAX_BUFF_SIZE
-
1177 (sg_dma_address(sg
) & ((1 << TRB_MAX_BUFF_SHIFT
) - 1));
1178 if (running_total
!= 0)
1181 /* How many more 64KB chunks to transfer, how many more TRBs? */
1182 while (running_total
< sg_dma_len(sg
)) {
1184 running_total
+= TRB_MAX_BUFF_SIZE
;
1186 xhci_dbg(xhci
, " sg #%d: dma = %#x, len = %#x (%d), num_trbs = %d\n",
1187 i
, sg_dma_address(sg
), len
, len
,
1188 num_trbs
- previous_total_trbs
);
1190 len
= min_t(int, len
, temp
);
1195 xhci_dbg(xhci
, "\n");
1196 if (!in_interrupt())
1197 dev_dbg(&urb
->dev
->dev
, "ep %#x - urb len = %d, sglist used, num_trbs = %d\n",
1198 urb
->ep
->desc
.bEndpointAddress
,
1199 urb
->transfer_buffer_length
,
1204 void check_trb_math(struct urb
*urb
, int num_trbs
, int running_total
)
1207 dev_dbg(&urb
->dev
->dev
, "%s - ep %#x - Miscalculated number of "
1208 "TRBs, %d left\n", __func__
,
1209 urb
->ep
->desc
.bEndpointAddress
, num_trbs
);
1210 if (running_total
!= urb
->transfer_buffer_length
)
1211 dev_dbg(&urb
->dev
->dev
, "%s - ep %#x - Miscalculated tx length, "
1212 "queued %#x (%d), asked for %#x (%d)\n",
1214 urb
->ep
->desc
.bEndpointAddress
,
1215 running_total
, running_total
,
1216 urb
->transfer_buffer_length
,
1217 urb
->transfer_buffer_length
);
1220 void giveback_first_trb(struct xhci_hcd
*xhci
, int slot_id
,
1221 unsigned int ep_index
, int start_cycle
,
1222 struct xhci_generic_trb
*start_trb
, struct xhci_td
*td
)
1225 * Pass all the TRBs to the hardware at once and make sure this write
1229 start_trb
->field
[3] |= start_cycle
;
1230 ring_ep_doorbell(xhci
, slot_id
, ep_index
);
1233 int queue_bulk_sg_tx(struct xhci_hcd
*xhci
, gfp_t mem_flags
,
1234 struct urb
*urb
, int slot_id
, unsigned int ep_index
)
1236 struct xhci_ring
*ep_ring
;
1237 unsigned int num_trbs
;
1239 struct scatterlist
*sg
;
1241 int trb_buff_len
, this_sg_len
, running_total
;
1245 struct xhci_generic_trb
*start_trb
;
1248 ep_ring
= xhci
->devs
[slot_id
]->ep_rings
[ep_index
];
1249 num_trbs
= count_sg_trbs_needed(xhci
, urb
);
1250 num_sgs
= urb
->num_sgs
;
1252 trb_buff_len
= xhci_prepare_transfer(xhci
, xhci
->devs
[slot_id
],
1253 ep_index
, num_trbs
, urb
, &td
, mem_flags
);
1254 if (trb_buff_len
< 0)
1255 return trb_buff_len
;
1257 * Don't give the first TRB to the hardware (by toggling the cycle bit)
1258 * until we've finished creating all the other TRBs. The ring's cycle
1259 * state may change as we enqueue the other TRBs, so save it too.
1261 start_trb
= &ep_ring
->enqueue
->generic
;
1262 start_cycle
= ep_ring
->cycle_state
;
1266 * How much data is in the first TRB?
1268 * There are three forces at work for TRB buffer pointers and lengths:
1269 * 1. We don't want to walk off the end of this sg-list entry buffer.
1270 * 2. The transfer length that the driver requested may be smaller than
1271 * the amount of memory allocated for this scatter-gather list.
1272 * 3. TRBs buffers can't cross 64KB boundaries.
1275 addr
= (u64
) sg_dma_address(sg
);
1276 this_sg_len
= sg_dma_len(sg
);
1277 trb_buff_len
= TRB_MAX_BUFF_SIZE
-
1278 (addr
& ((1 << TRB_MAX_BUFF_SHIFT
) - 1));
1279 trb_buff_len
= min_t(int, trb_buff_len
, this_sg_len
);
1280 if (trb_buff_len
> urb
->transfer_buffer_length
)
1281 trb_buff_len
= urb
->transfer_buffer_length
;
1282 xhci_dbg(xhci
, "First length to xfer from 1st sglist entry = %u\n",
1286 /* Queue the first TRB, even if it's zero-length */
1290 /* Don't change the cycle bit of the first TRB until later */
1294 field
|= ep_ring
->cycle_state
;
1296 /* Chain all the TRBs together; clear the chain bit in the last
1297 * TRB to indicate it's the last TRB in the chain.
1302 /* FIXME - add check for ZERO_PACKET flag before this */
1303 td
->last_trb
= ep_ring
->enqueue
;
1306 xhci_dbg(xhci
, " sg entry: dma = %#x, len = %#x (%d), "
1307 "64KB boundary at %#x, end dma = %#x\n",
1308 (unsigned int) addr
, trb_buff_len
, trb_buff_len
,
1309 (unsigned int) (addr
+ TRB_MAX_BUFF_SIZE
) & ~(TRB_MAX_BUFF_SIZE
- 1),
1310 (unsigned int) addr
+ trb_buff_len
);
1311 if (TRB_MAX_BUFF_SIZE
-
1312 (addr
& ((1 << TRB_MAX_BUFF_SHIFT
) - 1)) < trb_buff_len
) {
1313 xhci_warn(xhci
, "WARN: sg dma xfer crosses 64KB boundaries!\n");
1314 xhci_dbg(xhci
, "Next boundary at %#x, end dma = %#x\n",
1315 (unsigned int) (addr
+ TRB_MAX_BUFF_SIZE
) & ~(TRB_MAX_BUFF_SIZE
- 1),
1316 (unsigned int) addr
+ trb_buff_len
);
1318 queue_trb(xhci
, ep_ring
, false,
1320 (u32
) ((u64
) addr
>> 32),
1321 TRB_LEN(trb_buff_len
) | TRB_INTR_TARGET(0),
1322 /* We always want to know if the TRB was short,
1323 * or we won't get an event when it completes.
1324 * (Unless we use event data TRBs, which are a
1325 * waste of space and HC resources.)
1327 field
| TRB_ISP
| TRB_TYPE(TRB_NORMAL
));
1329 running_total
+= trb_buff_len
;
1331 /* Calculate length for next transfer --
1332 * Are we done queueing all the TRBs for this sg entry?
1334 this_sg_len
-= trb_buff_len
;
1335 if (this_sg_len
== 0) {
1340 addr
= (u64
) sg_dma_address(sg
);
1341 this_sg_len
= sg_dma_len(sg
);
1343 addr
+= trb_buff_len
;
1346 trb_buff_len
= TRB_MAX_BUFF_SIZE
-
1347 (addr
& ((1 << TRB_MAX_BUFF_SHIFT
) - 1));
1348 trb_buff_len
= min_t(int, trb_buff_len
, this_sg_len
);
1349 if (running_total
+ trb_buff_len
> urb
->transfer_buffer_length
)
1351 urb
->transfer_buffer_length
- running_total
;
1352 } while (running_total
< urb
->transfer_buffer_length
);
1354 check_trb_math(urb
, num_trbs
, running_total
);
1355 giveback_first_trb(xhci
, slot_id
, ep_index
, start_cycle
, start_trb
, td
);
1359 /* This is very similar to what ehci-q.c qtd_fill() does */
1360 int queue_bulk_tx(struct xhci_hcd
*xhci
, gfp_t mem_flags
,
1361 struct urb
*urb
, int slot_id
, unsigned int ep_index
)
1363 struct xhci_ring
*ep_ring
;
1366 struct xhci_generic_trb
*start_trb
;
1371 int running_total
, trb_buff_len
, ret
;
1375 return queue_bulk_sg_tx(xhci
, mem_flags
, urb
, slot_id
, ep_index
);
1377 ep_ring
= xhci
->devs
[slot_id
]->ep_rings
[ep_index
];
1380 /* How much data is (potentially) left before the 64KB boundary? */
1381 running_total
= TRB_MAX_BUFF_SIZE
-
1382 (urb
->transfer_dma
& ((1 << TRB_MAX_BUFF_SHIFT
) - 1));
1384 /* If there's some data on this 64KB chunk, or we have to send a
1385 * zero-length transfer, we need at least one TRB
1387 if (running_total
!= 0 || urb
->transfer_buffer_length
== 0)
1389 /* How many more 64KB chunks to transfer, how many more TRBs? */
1390 while (running_total
< urb
->transfer_buffer_length
) {
1392 running_total
+= TRB_MAX_BUFF_SIZE
;
1394 /* FIXME: this doesn't deal with URB_ZERO_PACKET - need one more */
1396 if (!in_interrupt())
1397 dev_dbg(&urb
->dev
->dev
, "ep %#x - urb len = %#x (%d), addr = %#x, num_trbs = %d\n",
1398 urb
->ep
->desc
.bEndpointAddress
,
1399 urb
->transfer_buffer_length
,
1400 urb
->transfer_buffer_length
,
1404 ret
= xhci_prepare_transfer(xhci
, xhci
->devs
[slot_id
], ep_index
,
1405 num_trbs
, urb
, &td
, mem_flags
);
1410 * Don't give the first TRB to the hardware (by toggling the cycle bit)
1411 * until we've finished creating all the other TRBs. The ring's cycle
1412 * state may change as we enqueue the other TRBs, so save it too.
1414 start_trb
= &ep_ring
->enqueue
->generic
;
1415 start_cycle
= ep_ring
->cycle_state
;
1418 /* How much data is in the first TRB? */
1419 addr
= (u64
) urb
->transfer_dma
;
1420 trb_buff_len
= TRB_MAX_BUFF_SIZE
-
1421 (urb
->transfer_dma
& ((1 << TRB_MAX_BUFF_SHIFT
) - 1));
1422 if (urb
->transfer_buffer_length
< trb_buff_len
)
1423 trb_buff_len
= urb
->transfer_buffer_length
;
1427 /* Queue the first TRB, even if it's zero-length */
1431 /* Don't change the cycle bit of the first TRB until later */
1435 field
|= ep_ring
->cycle_state
;
1437 /* Chain all the TRBs together; clear the chain bit in the last
1438 * TRB to indicate it's the last TRB in the chain.
1443 /* FIXME - add check for ZERO_PACKET flag before this */
1444 td
->last_trb
= ep_ring
->enqueue
;
1447 queue_trb(xhci
, ep_ring
, false,
1449 (u32
) ((u64
) addr
>> 32),
1450 TRB_LEN(trb_buff_len
) | TRB_INTR_TARGET(0),
1451 /* We always want to know if the TRB was short,
1452 * or we won't get an event when it completes.
1453 * (Unless we use event data TRBs, which are a
1454 * waste of space and HC resources.)
1456 field
| TRB_ISP
| TRB_TYPE(TRB_NORMAL
));
1458 running_total
+= trb_buff_len
;
1460 /* Calculate length for next transfer */
1461 addr
+= trb_buff_len
;
1462 trb_buff_len
= urb
->transfer_buffer_length
- running_total
;
1463 if (trb_buff_len
> TRB_MAX_BUFF_SIZE
)
1464 trb_buff_len
= TRB_MAX_BUFF_SIZE
;
1465 } while (running_total
< urb
->transfer_buffer_length
);
1467 check_trb_math(urb
, num_trbs
, running_total
);
1468 giveback_first_trb(xhci
, slot_id
, ep_index
, start_cycle
, start_trb
, td
);
1472 /* Caller must have locked xhci->lock */
1473 int queue_ctrl_tx(struct xhci_hcd
*xhci
, gfp_t mem_flags
,
1474 struct urb
*urb
, int slot_id
, unsigned int ep_index
)
1476 struct xhci_ring
*ep_ring
;
1479 struct usb_ctrlrequest
*setup
;
1480 struct xhci_generic_trb
*start_trb
;
1485 ep_ring
= xhci
->devs
[slot_id
]->ep_rings
[ep_index
];
1488 * Need to copy setup packet into setup TRB, so we can't use the setup
1491 if (!urb
->setup_packet
)
1494 if (!in_interrupt())
1495 xhci_dbg(xhci
, "Queueing ctrl tx for slot id %d, ep %d\n",
1497 /* 1 TRB for setup, 1 for status */
1500 * Don't need to check if we need additional event data and normal TRBs,
1501 * since data in control transfers will never get bigger than 16MB
1502 * XXX: can we get a buffer that crosses 64KB boundaries?
1504 if (urb
->transfer_buffer_length
> 0)
1506 ret
= xhci_prepare_transfer(xhci
, xhci
->devs
[slot_id
], ep_index
, num_trbs
,
1507 urb
, &td
, mem_flags
);
1512 * Don't give the first TRB to the hardware (by toggling the cycle bit)
1513 * until we've finished creating all the other TRBs. The ring's cycle
1514 * state may change as we enqueue the other TRBs, so save it too.
1516 start_trb
= &ep_ring
->enqueue
->generic
;
1517 start_cycle
= ep_ring
->cycle_state
;
1519 /* Queue setup TRB - see section 6.4.1.2.1 */
1520 /* FIXME better way to translate setup_packet into two u32 fields? */
1521 setup
= (struct usb_ctrlrequest
*) urb
->setup_packet
;
1522 queue_trb(xhci
, ep_ring
, false,
1523 /* FIXME endianness is probably going to bite my ass here. */
1524 setup
->bRequestType
| setup
->bRequest
<< 8 | setup
->wValue
<< 16,
1525 setup
->wIndex
| setup
->wLength
<< 16,
1526 TRB_LEN(8) | TRB_INTR_TARGET(0),
1527 /* Immediate data in pointer */
1528 TRB_IDT
| TRB_TYPE(TRB_SETUP
));
1530 /* If there's data, queue data TRBs */
1532 if (urb
->transfer_buffer_length
> 0) {
1533 if (setup
->bRequestType
& USB_DIR_IN
)
1534 field
|= TRB_DIR_IN
;
1535 queue_trb(xhci
, ep_ring
, false,
1536 lower_32_bits(urb
->transfer_dma
),
1537 upper_32_bits(urb
->transfer_dma
),
1538 TRB_LEN(urb
->transfer_buffer_length
) | TRB_INTR_TARGET(0),
1539 /* Event on short tx */
1540 field
| TRB_ISP
| TRB_TYPE(TRB_DATA
) | ep_ring
->cycle_state
);
1543 /* Save the DMA address of the last TRB in the TD */
1544 td
->last_trb
= ep_ring
->enqueue
;
1546 /* Queue status TRB - see Table 7 and sections 4.11.2.2 and 6.4.1.2.3 */
1547 /* If the device sent data, the status stage is an OUT transfer */
1548 if (urb
->transfer_buffer_length
> 0 && setup
->bRequestType
& USB_DIR_IN
)
1552 queue_trb(xhci
, ep_ring
, false,
1556 /* Event on completion */
1557 field
| TRB_IOC
| TRB_TYPE(TRB_STATUS
) | ep_ring
->cycle_state
);
1559 giveback_first_trb(xhci
, slot_id
, ep_index
, start_cycle
, start_trb
, td
);
1563 /**** Command Ring Operations ****/
1565 /* Generic function for queueing a command TRB on the command ring */
1566 static int queue_command(struct xhci_hcd
*xhci
, u32 field1
, u32 field2
, u32 field3
, u32 field4
)
1568 if (!room_on_ring(xhci
, xhci
->cmd_ring
, 1)) {
1569 if (!in_interrupt())
1570 xhci_err(xhci
, "ERR: No room for command on command ring\n");
1573 queue_trb(xhci
, xhci
->cmd_ring
, false, field1
, field2
, field3
,
1574 field4
| xhci
->cmd_ring
->cycle_state
);
1578 /* Queue a no-op command on the command ring */
1579 static int queue_cmd_noop(struct xhci_hcd
*xhci
)
1581 return queue_command(xhci
, 0, 0, 0, TRB_TYPE(TRB_CMD_NOOP
));
1585 * Place a no-op command on the command ring to test the command and
1588 void *setup_one_noop(struct xhci_hcd
*xhci
)
1590 if (queue_cmd_noop(xhci
) < 0)
1592 xhci
->noops_submitted
++;
1596 /* Queue a slot enable or disable request on the command ring */
1597 int queue_slot_control(struct xhci_hcd
*xhci
, u32 trb_type
, u32 slot_id
)
1599 return queue_command(xhci
, 0, 0, 0,
1600 TRB_TYPE(trb_type
) | SLOT_ID_FOR_TRB(slot_id
));
1603 /* Queue an address device command TRB */
1604 int queue_address_device(struct xhci_hcd
*xhci
, dma_addr_t in_ctx_ptr
, u32 slot_id
)
1606 return queue_command(xhci
, in_ctx_ptr
, 0, 0,
1607 TRB_TYPE(TRB_ADDR_DEV
) | SLOT_ID_FOR_TRB(slot_id
));
1610 /* Queue a configure endpoint command TRB */
1611 int queue_configure_endpoint(struct xhci_hcd
*xhci
, dma_addr_t in_ctx_ptr
, u32 slot_id
)
1613 return queue_command(xhci
, in_ctx_ptr
, 0, 0,
1614 TRB_TYPE(TRB_CONFIG_EP
) | SLOT_ID_FOR_TRB(slot_id
));
1617 int queue_stop_endpoint(struct xhci_hcd
*xhci
, int slot_id
,
1618 unsigned int ep_index
)
1620 u32 trb_slot_id
= SLOT_ID_FOR_TRB(slot_id
);
1621 u32 trb_ep_index
= EP_ID_FOR_TRB(ep_index
);
1622 u32 type
= TRB_TYPE(TRB_STOP_RING
);
1624 return queue_command(xhci
, 0, 0, 0,
1625 trb_slot_id
| trb_ep_index
| type
);
1628 /* Set Transfer Ring Dequeue Pointer command.
1629 * This should not be used for endpoints that have streams enabled.
1631 static int queue_set_tr_deq(struct xhci_hcd
*xhci
, int slot_id
,
1632 unsigned int ep_index
, struct xhci_segment
*deq_seg
,
1633 union xhci_trb
*deq_ptr
, u32 cycle_state
)
1636 u32 trb_slot_id
= SLOT_ID_FOR_TRB(slot_id
);
1637 u32 trb_ep_index
= EP_ID_FOR_TRB(ep_index
);
1638 u32 type
= TRB_TYPE(TRB_SET_DEQ
);
1640 addr
= trb_virt_to_dma(deq_seg
, deq_ptr
);
1642 xhci_warn(xhci
, "WARN Cannot submit Set TR Deq Ptr\n");
1643 xhci_warn(xhci
, "WARN deq seg = 0x%x, deq pt = 0x%x\n",
1644 (unsigned int) deq_seg
,
1645 (unsigned int) deq_ptr
);
1646 return queue_command(xhci
, (u32
) addr
| cycle_state
, 0, 0,
1647 trb_slot_id
| trb_ep_index
| type
);