drivers/usb/host/xhci.h

   1 /*
   2  * xHCI host controller driver
   3  *
   4  * Copyright (C) 2008 Intel Corp.
   5  *
   6  * Author: Sarah Sharp
   7  * Some code borrowed from the Linux EHCI driver.
   8  *
   9  * This program is free software; you can redistribute it and/or modify
  10  * it under the terms of the GNU General Public License version 2 as
  11  * published by the Free Software Foundation.
  12  *
  13  * This program is distributed in the hope that it will be useful, but
  14  * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
  15  * or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
  16  * for more details.
  17  *
  18  * You should have received a copy of the GNU General Public License
  19  * along with this program; if not, write to the Free Software Foundation,
  20  * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  21  */
  22
  23 #ifndef __LINUX_XHCI_HCD_H
  24 #define __LINUX_XHCI_HCD_H
  25
  26 #include <linux/usb.h>
  27 #include <linux/timer.h>
  28 #include <linux/kernel.h>
  29 #include <linux/usb/hcd.h>
  30
  31 /* Code sharing between pci-quirks and xhci hcd */
  32 #include        "xhci-ext-caps.h"
  33 #include "pci-quirks.h"
  34
  35 /* xHCI PCI Configuration Registers */
  36 #define XHCI_SBRN_OFFSET        (0x60)
  37
  38 /* Max number of USB devices for any host controller - limit in section 6.1 */
  39 #define MAX_HC_SLOTS            256
  40 /* Section 5.3.3 - MaxPorts */
  41 #define MAX_HC_PORTS            127
  42
  43 /*
  44  * xHCI register interface.
  45  * This corresponds to the eXtensible Host Controller Interface (xHCI)
  46  * Revision 0.95 specification
  47  */
  48
  49 /**
  50  * struct xhci_cap_regs - xHCI Host Controller Capability Registers.
  51  * @hc_capbase:         length of the capabilities register and HC version number
  52  * @hcs_params1:        HCSPARAMS1 - Structural Parameters 1
  53  * @hcs_params2:        HCSPARAMS2 - Structural Parameters 2
  54  * @hcs_params3:        HCSPARAMS3 - Structural Parameters 3
  55  * @hcc_params:         HCCPARAMS - Capability Parameters
  56  * @db_off:             DBOFF - Doorbell array offset
  57  * @run_regs_off:       RTSOFF - Runtime register space offset
  58  */
  59 struct xhci_cap_regs {
  60         __le32  hc_capbase;
  61         __le32  hcs_params1;
  62         __le32  hcs_params2;
  63         __le32  hcs_params3;
  64         __le32  hcc_params;
  65         __le32  db_off;
  66         __le32  run_regs_off;
  67         /* Reserved up to (CAPLENGTH - 0x1C) */
  68 };
  69
  70 /* hc_capbase bitmasks */
  71 /* bits 7:0 - how long is the Capabilities register */
  72 #define HC_LENGTH(p)            XHCI_HC_LENGTH(p)
  73 /* bits 31:16   */
  74 #define HC_VERSION(p)           (((p) >> 16) & 0xffff)
  75
  76 /* HCSPARAMS1 - hcs_params1 - bitmasks */
  77 /* bits 0:7, Max Device Slots */
  78 #define HCS_MAX_SLOTS(p)        (((p) >> 0) & 0xff)
  79 #define HCS_SLOTS_MASK          0xff
  80 /* bits 8:18, Max Interrupters */
  81 #define HCS_MAX_INTRS(p)        (((p) >> 8) & 0x7ff)
  82 /* bits 24:31, Max Ports - max value is 0x7F = 127 ports */
  83 #define HCS_MAX_PORTS(p)        (((p) >> 24) & 0x7f)
  84
  85 /* HCSPARAMS2 - hcs_params2 - bitmasks */
  86 /* bits 0:3, frames or uframes that SW needs to queue transactions
  87  * ahead of the HW to meet periodic deadlines */
  88 #define HCS_IST(p)              (((p) >> 0) & 0xf)
  89 /* bits 4:7, max number of Event Ring segments */
  90 #define HCS_ERST_MAX(p)         (((p) >> 4) & 0xf)
  91 /* bit 26 Scratchpad restore - for save/restore HW state - not used yet */
  92 /* bits 27:31 number of Scratchpad buffers SW must allocate for the HW */
  93 #define HCS_MAX_SCRATCHPAD(p)   (((p) >> 27) & 0x1f)
  94
  95 /* HCSPARAMS3 - hcs_params3 - bitmasks */
  96 /* bits 0:7, Max U1 to U0 latency for the roothub ports */
  97 #define HCS_U1_LATENCY(p)       (((p) >> 0) & 0xff)
  98 /* bits 16:31, Max U2 to U0 latency for the roothub ports */
  99 #define HCS_U2_LATENCY(p)       (((p) >> 16) & 0xffff)
 100
 101 /* HCCPARAMS - hcc_params - bitmasks */
 102 /* true: HC can use 64-bit address pointers */
 103 #define HCC_64BIT_ADDR(p)       ((p) & (1 << 0))
 104 /* true: HC can do bandwidth negotiation */
 105 #define HCC_BANDWIDTH_NEG(p)    ((p) & (1 << 1))
 106 /* true: HC uses 64-byte Device Context structures
 107  * FIXME 64-byte context structures aren't supported yet.
 108  */
 109 #define HCC_64BYTE_CONTEXT(p)   ((p) & (1 << 2))
 110 /* true: HC has port power switches */
 111 #define HCC_PPC(p)              ((p) & (1 << 3))
 112 /* true: HC has port indicators */
 113 #define HCS_INDICATOR(p)        ((p) & (1 << 4))
 114 /* true: HC has Light HC Reset Capability */
 115 #define HCC_LIGHT_RESET(p)      ((p) & (1 << 5))
 116 /* true: HC supports latency tolerance messaging */
 117 #define HCC_LTC(p)              ((p) & (1 << 6))
 118 /* true: no secondary Stream ID Support */
 119 #define HCC_NSS(p)              ((p) & (1 << 7))
 120 /* Max size for Primary Stream Arrays - 2^(n+1), where n is bits 12:15 */
 121 #define HCC_MAX_PSA(p)          (1 << ((((p) >> 12) & 0xf) + 1))
 122 /* Extended Capabilities pointer from PCI base - section 5.3.6 */
 123 #define HCC_EXT_CAPS(p)         XHCI_HCC_EXT_CAPS(p)
 124
 125 /* db_off bitmask - bits 0:1 reserved */
 126 #define DBOFF_MASK      (~0x3)
 127
 128 /* run_regs_off bitmask - bits 0:4 reserved */
 129 #define RTSOFF_MASK     (~0x1f)
 130
 131
 132 /* Number of registers per port */
 133 #define NUM_PORT_REGS   4
 134
 135 /**
 136  * struct xhci_op_regs - xHCI Host Controller Operational Registers.
 137  * @command:            USBCMD - xHC command register
 138  * @status:             USBSTS - xHC status register
 139  * @page_size:          This indicates the page size that the host controller
 140  *                      supports.  If bit n is set, the HC supports a page size
 141  *                      of 2^(n+12), up to a 128MB page size.
 142  *                      4K is the minimum page size.
 143  * @cmd_ring:           CRP - 64-bit Command Ring Pointer
 144  * @dcbaa_ptr:          DCBAAP - 64-bit Device Context Base Address Array Pointer
 145  * @config_reg:         CONFIG - Configure Register
 146  * @port_status_base:   PORTSCn - base address for Port Status and Control
 147  *                      Each port has a Port Status and Control register,
 148  *                      followed by a Port Power Management Status and Control
 149  *                      register, a Port Link Info register, and a reserved
 150  *                      register.
 151  * @port_power_base:    PORTPMSCn - base address for
 152  *                      Port Power Management Status and Control
 153  * @port_link_base:     PORTLIn - base address for Port Link Info (current
 154  *                      Link PM state and control) for USB 2.1 and USB 3.0
 155  *                      devices.
 156  */
 157 struct xhci_op_regs {
 158         __le32  command;
 159         __le32  status;
 160         __le32  page_size;
 161         __le32  reserved1;
 162         __le32  reserved2;
 163         __le32  dev_notification;
 164         __le64  cmd_ring;
 165         /* rsvd: offset 0x20-2F */
 166         __le32  reserved3[4];
 167         __le64  dcbaa_ptr;
 168         __le32  config_reg;
 169         /* rsvd: offset 0x3C-3FF */
 170         __le32  reserved4[241];
 171         /* port 1 registers, which serve as a base address for other ports */
 172         __le32  port_status_base;
 173         __le32  port_power_base;
 174         __le32  port_link_base;
 175         __le32  reserved5;
 176         /* registers for ports 2-255 */
 177         __le32  reserved6[NUM_PORT_REGS*254];
 178 };
 179
 180 /* USBCMD - USB command - command bitmasks */
 181 /* start/stop HC execution - do not write unless HC is halted*/
 182 #define CMD_RUN         XHCI_CMD_RUN
 183 /* Reset HC - resets internal HC state machine and all registers (except
 184  * PCI config regs).  HC does NOT drive a USB reset on the downstream ports.
 185  * The xHCI driver must reinitialize the xHC after setting this bit.
 186  */
 187 #define CMD_RESET       (1 << 1)
 188 /* Event Interrupt Enable - a '1' allows interrupts from the host controller */
 189 #define CMD_EIE         XHCI_CMD_EIE
 190 /* Host System Error Interrupt Enable - get out-of-band signal for HC errors */
 191 #define CMD_HSEIE       XHCI_CMD_HSEIE
 192 /* bits 4:6 are reserved (and should be preserved on writes). */
 193 /* light reset (port status stays unchanged) - reset completed when this is 0 */
 194 #define CMD_LRESET      (1 << 7)
 195 /* host controller save/restore state. */
 196 #define CMD_CSS         (1 << 8)
 197 #define CMD_CRS         (1 << 9)
 198 /* Enable Wrap Event - '1' means xHC generates an event when MFINDEX wraps. */
 199 #define CMD_EWE         XHCI_CMD_EWE
 200 /* MFINDEX power management - '1' means xHC can stop MFINDEX counter if all root
 201  * hubs are in U3 (selective suspend), disconnect, disabled, or powered-off.
 202  * '0' means the xHC can power it off if all ports are in the disconnect,
 203  * disabled, or powered-off state.
 204  */
 205 #define CMD_PM_INDEX    (1 << 11)
 206 /* bits 12:31 are reserved (and should be preserved on writes). */
 207
 208 /* IMAN - Interrupt Management Register */
 209 #define IMAN_IP         (1 << 1)
 210 #define IMAN_IE         (1 << 0)
 211
 212 /* USBSTS - USB status - status bitmasks */
 213 /* HC not running - set to 1 when run/stop bit is cleared. */
 214 #define STS_HALT        XHCI_STS_HALT
 215 /* serious error, e.g. PCI parity error.  The HC will clear the run/stop bit. */
 216 #define STS_FATAL       (1 << 2)
 217 /* event interrupt - clear this prior to clearing any IP flags in IR set*/
 218 #define STS_EINT        (1 << 3)
 219 /* port change detect */
 220 #define STS_PORT        (1 << 4)
 221 /* bits 5:7 reserved and zeroed */
 222 /* save state status - '1' means xHC is saving state */
 223 #define STS_SAVE        (1 << 8)
 224 /* restore state status - '1' means xHC is restoring state */
 225 #define STS_RESTORE     (1 << 9)
 226 /* true: save or restore error */
 227 #define STS_SRE         (1 << 10)
 228 /* true: Controller Not Ready to accept doorbell or op reg writes after reset */
 229 #define STS_CNR         XHCI_STS_CNR
 230 /* true: internal Host Controller Error - SW needs to reset and reinitialize */
 231 #define STS_HCE         (1 << 12)
 232 /* bits 13:31 reserved and should be preserved */
 233
 234 /*
 235  * DNCTRL - Device Notification Control Register - dev_notification bitmasks
 236  * Generate a device notification event when the HC sees a transaction with a
 237  * notification type that matches a bit set in this bit field.
 238  */
 239 #define DEV_NOTE_MASK           (0xffff)
 240 #define ENABLE_DEV_NOTE(x)      (1 << (x))
 241 /* Most of the device notification types should only be used for debug.
 242  * SW does need to pay attention to function wake notifications.
 243  */
 244 #define DEV_NOTE_FWAKE          ENABLE_DEV_NOTE(1)
 245
 246 /* CRCR - Command Ring Control Register - cmd_ring bitmasks */
 247 /* bit 0 is the command ring cycle state */
 248 /* stop ring operation after completion of the currently executing command */
 249 #define CMD_RING_PAUSE          (1 << 1)
 250 /* stop ring immediately - abort the currently executing command */
 251 #define CMD_RING_ABORT          (1 << 2)
 252 /* true: command ring is running */
 253 #define CMD_RING_RUNNING        (1 << 3)
 254 /* bits 4:5 reserved and should be preserved */
 255 /* Command Ring pointer - bit mask for the lower 32 bits. */
 256 #define CMD_RING_RSVD_BITS      (0x3f)
 257
 258 /* CONFIG - Configure Register - config_reg bitmasks */
 259 /* bits 0:7 - maximum number of device slots enabled (NumSlotsEn) */
 260 #define MAX_DEVS(p)     ((p) & 0xff)
 261 /* bits 8:31 - reserved and should be preserved */
 262
 263 /* PORTSC - Port Status and Control Register - port_status_base bitmasks */
 264 /* true: device connected */
 265 #define PORT_CONNECT    (1 << 0)
 266 /* true: port enabled */
 267 #define PORT_PE         (1 << 1)
 268 /* bit 2 reserved and zeroed */
 269 /* true: port has an over-current condition */
 270 #define PORT_OC         (1 << 3)
 271 /* true: port reset signaling asserted */
 272 #define PORT_RESET      (1 << 4)
 273 /* Port Link State - bits 5:8
 274  * A read gives the current link PM state of the port,
 275  * a write with Link State Write Strobe set sets the link state.
 276  */
 277 #define PORT_PLS_MASK   (0xf << 5)
 278 #define XDEV_U0         (0x0 << 5)
 279 #define XDEV_U2         (0x2 << 5)
 280 #define XDEV_U3         (0x3 << 5)
 281 #define XDEV_RESUME     (0xf << 5)
 282 /* true: port has power (see HCC_PPC) */
 283 #define PORT_POWER      (1 << 9)
 284 /* bits 10:13 indicate device speed:
 285  * 0 - undefined speed - port hasn't be initialized by a reset yet
 286  * 1 - full speed
 287  * 2 - low speed
 288  * 3 - high speed
 289  * 4 - super speed
 290  * 5-15 reserved
 291  */
 292 #define DEV_SPEED_MASK          (0xf << 10)
 293 #define XDEV_FS                 (0x1 << 10)
 294 #define XDEV_LS                 (0x2 << 10)
 295 #define XDEV_HS                 (0x3 << 10)
 296 #define XDEV_SS                 (0x4 << 10)
 297 #define DEV_UNDEFSPEED(p)       (((p) & DEV_SPEED_MASK) == (0x0<<10))
 298 #define DEV_FULLSPEED(p)        (((p) & DEV_SPEED_MASK) == XDEV_FS)
 299 #define DEV_LOWSPEED(p)         (((p) & DEV_SPEED_MASK) == XDEV_LS)
 300 #define DEV_HIGHSPEED(p)        (((p) & DEV_SPEED_MASK) == XDEV_HS)
 301 #define DEV_SUPERSPEED(p)       (((p) & DEV_SPEED_MASK) == XDEV_SS)
 302 /* Bits 20:23 in the Slot Context are the speed for the device */
 303 #define SLOT_SPEED_FS           (XDEV_FS << 10)
 304 #define SLOT_SPEED_LS           (XDEV_LS << 10)
 305 #define SLOT_SPEED_HS           (XDEV_HS << 10)
 306 #define SLOT_SPEED_SS           (XDEV_SS << 10)
 307 /* Port Indicator Control */
 308 #define PORT_LED_OFF    (0 << 14)
 309 #define PORT_LED_AMBER  (1 << 14)
 310 #define PORT_LED_GREEN  (2 << 14)
 311 #define PORT_LED_MASK   (3 << 14)
 312 /* Port Link State Write Strobe - set this when changing link state */
 313 #define PORT_LINK_STROBE        (1 << 16)
 314 /* true: connect status change */
 315 #define PORT_CSC        (1 << 17)
 316 /* true: port enable change */
 317 #define PORT_PEC        (1 << 18)
 318 /* true: warm reset for a USB 3.0 device is done.  A "hot" reset puts the port
 319  * into an enabled state, and the device into the default state.  A "warm" reset
 320  * also resets the link, forcing the device through the link training sequence.
 321  * SW can also look at the Port Reset register to see when warm reset is done.
 322  */
 323 #define PORT_WRC        (1 << 19)
 324 /* true: over-current change */
 325 #define PORT_OCC        (1 << 20)
 326 /* true: reset change - 1 to 0 transition of PORT_RESET */
 327 #define PORT_RC         (1 << 21)
 328 /* port link status change - set on some port link state transitions:
 329  *  Transition                          Reason
 330  *  ------------------------------------------------------------------------------
 331  *  - U3 to Resume                      Wakeup signaling from a device
 332  *  - Resume to Recovery to U0          USB 3.0 device resume
 333  *  - Resume to U0                      USB 2.0 device resume
 334  *  - U3 to Recovery to U0              Software resume of USB 3.0 device complete
 335  *  - U3 to U0                          Software resume of USB 2.0 device complete
 336  *  - U2 to U0                          L1 resume of USB 2.1 device complete
 337  *  - U0 to U0 (???)                    L1 entry rejection by USB 2.1 device
 338  *  - U0 to disabled                    L1 entry error with USB 2.1 device
 339  *  - Any state to inactive             Error on USB 3.0 port
 340  */
 341 #define PORT_PLC        (1 << 22)
 342 /* port configure error change - port failed to configure its link partner */
 343 #define PORT_CEC        (1 << 23)
 344 /* bit 24 reserved */
 345 /* wake on connect (enable) */
 346 #define PORT_WKCONN_E   (1 << 25)
 347 /* wake on disconnect (enable) */
 348 #define PORT_WKDISC_E   (1 << 26)
 349 /* wake on over-current (enable) */
 350 #define PORT_WKOC_E     (1 << 27)
 351 /* bits 28:29 reserved */
 352 /* true: device is removable - for USB 3.0 roothub emulation */
 353 #define PORT_DEV_REMOVE (1 << 30)
 354 /* Initiate a warm port reset - complete when PORT_WRC is '1' */
 355 #define PORT_WR         (1 << 31)
 356
 357 /* We mark duplicate entries with -1 */
 358 #define DUPLICATE_ENTRY ((u8)(-1))
 359
 360 /* Port Power Management Status and Control - port_power_base bitmasks */
 361 /* Inactivity timer value for transitions into U1, in microseconds.
 362  * Timeout can be up to 127us.  0xFF means an infinite timeout.
 363  */
 364 #define PORT_U1_TIMEOUT(p)      ((p) & 0xff)
 365 #define PORT_U1_TIMEOUT_MASK    0xff
 366 /* Inactivity timer value for transitions into U2 */
 367 #define PORT_U2_TIMEOUT(p)      (((p) & 0xff) << 8)
 368 #define PORT_U2_TIMEOUT_MASK    (0xff << 8)
 369 /* Bits 24:31 for port testing */
 370
 371 /* USB2 Protocol PORTSPMSC */
 372 #define PORT_L1S_MASK           7
 373 #define PORT_L1S_SUCCESS        1
 374 #define PORT_RWE                (1 << 3)
 375 #define PORT_HIRD(p)            (((p) & 0xf) << 4)
 376 #define PORT_HIRD_MASK          (0xf << 4)
 377 #define PORT_L1DS(p)            (((p) & 0xff) << 8)
 378 #define PORT_HLE                (1 << 16)
 379
 380 /**
 381  * struct xhci_intr_reg - Interrupt Register Set
 382  * @irq_pending:        IMAN - Interrupt Management Register.  Used to enable
 383  *                      interrupts and check for pending interrupts.
 384  * @irq_control:        IMOD - Interrupt Moderation Register.
 385  *                      Used to throttle interrupts.
 386  * @erst_size:          Number of segments in the Event Ring Segment Table (ERST).
 387  * @erst_base:          ERST base address.
 388  * @erst_dequeue:       Event ring dequeue pointer.
 389  *
 390  * Each interrupter (defined by a MSI-X vector) has an event ring and an Event
 391  * Ring Segment Table (ERST) associated with it.  The event ring is comprised of
 392  * multiple segments of the same size.  The HC places events on the ring and
 393  * "updates the Cycle bit in the TRBs to indicate to software the current
 394  * position of the Enqueue Pointer." The HCD (Linux) processes those events and
 395  * updates the dequeue pointer.
 396  */
 397 struct xhci_intr_reg {
 398         __le32  irq_pending;
 399         __le32  irq_control;
 400         __le32  erst_size;
 401         __le32  rsvd;
 402         __le64  erst_base;
 403         __le64  erst_dequeue;
 404 };
 405
 406 /* irq_pending bitmasks */
 407 #define ER_IRQ_PENDING(p)       ((p) & 0x1)
 408 /* bits 2:31 need to be preserved */
 409 /* THIS IS BUGGY - FIXME - IP IS WRITE 1 TO CLEAR */
 410 #define ER_IRQ_CLEAR(p)         ((p) & 0xfffffffe)
 411 #define ER_IRQ_ENABLE(p)        ((ER_IRQ_CLEAR(p)) | 0x2)
 412 #define ER_IRQ_DISABLE(p)       ((ER_IRQ_CLEAR(p)) & ~(0x2))
 413
 414 /* irq_control bitmasks */
 415 /* Minimum interval between interrupts (in 250ns intervals).  The interval
 416  * between interrupts will be longer if there are no events on the event ring.
 417  * Default is 4000 (1 ms).
 418  */
 419 #define ER_IRQ_INTERVAL_MASK    (0xffff)
 420 /* Counter used to count down the time to the next interrupt - HW use only */
 421 #define ER_IRQ_COUNTER_MASK     (0xffff << 16)
 422
 423 /* erst_size bitmasks */
 424 /* Preserve bits 16:31 of erst_size */
 425 #define ERST_SIZE_MASK          (0xffff << 16)
 426
 427 /* erst_dequeue bitmasks */
 428 /* Dequeue ERST Segment Index (DESI) - Segment number (or alias)
 429  * where the current dequeue pointer lies.  This is an optional HW hint.
 430  */
 431 #define ERST_DESI_MASK          (0x7)
 432 /* Event Handler Busy (EHB) - is the event ring scheduled to be serviced by
 433  * a work queue (or delayed service routine)?
 434  */
 435 #define ERST_EHB                (1 << 3)
 436 #define ERST_PTR_MASK           (0xf)
 437
 438 /**
 439  * struct xhci_run_regs
 440  * @microframe_index:
 441  *              MFINDEX - current microframe number
 442  *
 443  * Section 5.5 Host Controller Runtime Registers:
 444  * "Software should read and write these registers using only Dword (32 bit)
 445  * or larger accesses"
 446  */
 447 struct xhci_run_regs {
 448         __le32                  microframe_index;
 449         __le32                  rsvd[7];
 450         struct xhci_intr_reg    ir_set[128];
 451 };
 452
 453 /**
 454  * struct doorbell_array
 455  *
 456  * Bits  0 -  7: Endpoint target
 457  * Bits  8 - 15: RsvdZ
 458  * Bits 16 - 31: Stream ID
 459  *
 460  * Section 5.6
 461  */
 462 struct xhci_doorbell_array {
 463         __le32  doorbell[256];
 464 };
 465
 466 #define DB_VALUE(ep, stream)    ((((ep) + 1) & 0xff) | ((stream) << 16))
 467 #define DB_VALUE_HOST           0x00000000
 468
 469 /**
 470  * struct xhci_protocol_caps
 471  * @revision:           major revision, minor revision, capability ID,
 472  *                      and next capability pointer.
 473  * @name_string:        Four ASCII characters to say which spec this xHC
 474  *                      follows, typically "USB ".
 475  * @port_info:          Port offset, count, and protocol-defined information.
 476  */
 477 struct xhci_protocol_caps {
 478         u32     revision;
 479         u32     name_string;
 480         u32     port_info;
 481 };
 482
 483 #define XHCI_EXT_PORT_MAJOR(x)  (((x) >> 24) & 0xff)
 484 #define XHCI_EXT_PORT_OFF(x)    ((x) & 0xff)
 485 #define XHCI_EXT_PORT_COUNT(x)  (((x) >> 8) & 0xff)
 486
 487 /**
 488  * struct xhci_container_ctx
 489  * @type: Type of context.  Used to calculated offsets to contained contexts.
 490  * @size: Size of the context data
 491  * @bytes: The raw context data given to HW
 492  * @dma: dma address of the bytes
 493  *
 494  * Represents either a Device or Input context.  Holds a pointer to the raw
 495  * memory used for the context (bytes) and dma address of it (dma).
 496  */
 497 struct xhci_container_ctx {
 498         unsigned type;
 499 #define XHCI_CTX_TYPE_DEVICE  0x1
 500 #define XHCI_CTX_TYPE_INPUT   0x2
 501
 502         int size;
 503
 504         u8 *bytes;
 505         dma_addr_t dma;
 506 };
 507
 508 /**
 509  * struct xhci_slot_ctx
 510  * @dev_info:   Route string, device speed, hub info, and last valid endpoint
 511  * @dev_info2:  Max exit latency for device number, root hub port number
 512  * @tt_info:    tt_info is used to construct split transaction tokens
 513  * @dev_state:  slot state and device address
 514  *
 515  * Slot Context - section 6.2.1.1.  This assumes the HC uses 32-byte context
 516  * structures.  If the HC uses 64-byte contexts, there is an additional 32 bytes
 517  * reserved at the end of the slot context for HC internal use.
 518  */
 519 struct xhci_slot_ctx {
 520         __le32  dev_info;
 521         __le32  dev_info2;
 522         __le32  tt_info;
 523         __le32  dev_state;
 524         /* offset 0x10 to 0x1f reserved for HC internal use */
 525         __le32  reserved[4];
 526 };
 527
 528 /* dev_info bitmasks */
 529 /* Route String - 0:19 */
 530 #define ROUTE_STRING_MASK       (0xfffff)
 531 /* Device speed - values defined by PORTSC Device Speed field - 20:23 */
 532 #define DEV_SPEED       (0xf << 20)
 533 /* bit 24 reserved */
 534 /* Is this LS/FS device connected through a HS hub? - bit 25 */
 535 #define DEV_MTT         (0x1 << 25)
 536 /* Set if the device is a hub - bit 26 */
 537 #define DEV_HUB         (0x1 << 26)
 538 /* Index of the last valid endpoint context in this device context - 27:31 */
 539 #define LAST_CTX_MASK   (0x1f << 27)
 540 #define LAST_CTX(p)     ((p) << 27)
 541 #define LAST_CTX_TO_EP_NUM(p)   (((p) >> 27) - 1)
 542 #define SLOT_FLAG       (1 << 0)
 543 #define EP0_FLAG        (1 << 1)
 544
 545 /* dev_info2 bitmasks */
 546 /* Max Exit Latency (ms) - worst case time to wake up all links in dev path */
 547 #define MAX_EXIT        (0xffff)
 548 /* Root hub port number that is needed to access the USB device */
 549 #define ROOT_HUB_PORT(p)        (((p) & 0xff) << 16)
 550 #define DEVINFO_TO_ROOT_HUB_PORT(p)     (((p) >> 16) & 0xff)
 551 /* Maximum number of ports under a hub device */
 552 #define XHCI_MAX_PORTS(p)       (((p) & 0xff) << 24)
 553
 554 /* tt_info bitmasks */
 555 /*
 556  * TT Hub Slot ID - for low or full speed devices attached to a high-speed hub
 557  * The Slot ID of the hub that isolates the high speed signaling from
 558  * this low or full-speed device.  '0' if attached to root hub port.
 559  */
 560 #define TT_SLOT         (0xff)
 561 /*
 562  * The number of the downstream facing port of the high-speed hub
 563  * '0' if the device is not low or full speed.
 564  */
 565 #define TT_PORT         (0xff << 8)
 566 #define TT_THINK_TIME(p)        (((p) & 0x3) << 16)
 567
 568 /* dev_state bitmasks */
 569 /* USB device address - assigned by the HC */
 570 #define DEV_ADDR_MASK   (0xff)
 571 /* bits 8:26 reserved */
 572 /* Slot state */
 573 #define SLOT_STATE      (0x1f << 27)
 574 #define GET_SLOT_STATE(p)       (((p) & (0x1f << 27)) >> 27)
 575
 576 #define SLOT_STATE_DISABLED     0
 577 #define SLOT_STATE_ENABLED      SLOT_STATE_DISABLED
 578 #define SLOT_STATE_DEFAULT      1
 579 #define SLOT_STATE_ADDRESSED    2
 580 #define SLOT_STATE_CONFIGURED   3
 581
 582 /**
 583  * struct xhci_ep_ctx
 584  * @ep_info:    endpoint state, streams, mult, and interval information.
 585  * @ep_info2:   information on endpoint type, max packet size, max burst size,
 586  *              error count, and whether the HC will force an event for all
 587  *              transactions.
 588  * @deq:        64-bit ring dequeue pointer address.  If the endpoint only
 589  *              defines one stream, this points to the endpoint transfer ring.
 590  *              Otherwise, it points to a stream context array, which has a
 591  *              ring pointer for each flow.
 592  * @tx_info:
 593  *              Average TRB lengths for the endpoint ring and
 594  *              max payload within an Endpoint Service Interval Time (ESIT).
 595  *
 596  * Endpoint Context - section 6.2.1.2.  This assumes the HC uses 32-byte context
 597  * structures.  If the HC uses 64-byte contexts, there is an additional 32 bytes
 598  * reserved at the end of the endpoint context for HC internal use.
 599  */
 600 struct xhci_ep_ctx {
 601         __le32  ep_info;
 602         __le32  ep_info2;
 603         __le64  deq;
 604         __le32  tx_info;
 605         /* offset 0x14 - 0x1f reserved for HC internal use */
 606         __le32  reserved[3];
 607 };
 608
 609 /* ep_info bitmasks */
 610 /*
 611  * Endpoint State - bits 0:2
 612  * 0 - disabled
 613  * 1 - running
 614  * 2 - halted due to halt condition - ok to manipulate endpoint ring
 615  * 3 - stopped
 616  * 4 - TRB error
 617  * 5-7 - reserved
 618  */
 619 #define EP_STATE_MASK           (0xf)
 620 #define EP_STATE_DISABLED       0
 621 #define EP_STATE_RUNNING        1
 622 #define EP_STATE_HALTED         2
 623 #define EP_STATE_STOPPED        3
 624 #define EP_STATE_ERROR          4
 625 /* Mult - Max number of burtst within an interval, in EP companion desc. */
 626 #define EP_MULT(p)              (((p) & 0x3) << 8)
 627 #define CTX_TO_EP_MULT(p)       (((p) >> 8) & 0x3)
 628 /* bits 10:14 are Max Primary Streams */
 629 /* bit 15 is Linear Stream Array */
 630 /* Interval - period between requests to an endpoint - 125u increments. */
 631 #define EP_INTERVAL(p)          (((p) & 0xff) << 16)
 632 #define EP_INTERVAL_TO_UFRAMES(p)               (1 << (((p) >> 16) & 0xff))
 633 #define CTX_TO_EP_INTERVAL(p)   (((p) >> 16) & 0xff)
 634 #define EP_MAXPSTREAMS_MASK     (0x1f << 10)
 635 #define EP_MAXPSTREAMS(p)       (((p) << 10) & EP_MAXPSTREAMS_MASK)
 636 /* Endpoint is set up with a Linear Stream Array (vs. Secondary Stream Array) */
 637 #define EP_HAS_LSA              (1 << 15)
 638
 639 /* ep_info2 bitmasks */
 640 /*
 641  * Force Event - generate transfer events for all TRBs for this endpoint
 642  * This will tell the HC to ignore the IOC and ISP flags (for debugging only).
 643  */
 644 #define FORCE_EVENT     (0x1)
 645 #define ERROR_COUNT(p)  (((p) & 0x3) << 1)
 646 #define CTX_TO_EP_TYPE(p)       (((p) >> 3) & 0x7)
 647 #define EP_TYPE(p)      ((p) << 3)
 648 #define ISOC_OUT_EP     1
 649 #define BULK_OUT_EP     2
 650 #define INT_OUT_EP      3
 651 #define CTRL_EP         4
 652 #define ISOC_IN_EP      5
 653 #define BULK_IN_EP      6
 654 #define INT_IN_EP       7
 655 /* bit 6 reserved */
 656 /* bit 7 is Host Initiate Disable - for disabling stream selection */
 657 #define MAX_BURST(p)    (((p)&0xff) << 8)
 658 #define CTX_TO_MAX_BURST(p)     (((p) >> 8) & 0xff)
 659 #define MAX_PACKET(p)   (((p)&0xffff) << 16)
 660 #define MAX_PACKET_MASK         (0xffff << 16)
 661 #define MAX_PACKET_DECODED(p)   (((p) >> 16) & 0xffff)
 662
 663 /* Get max packet size from ep desc. Bit 10..0 specify the max packet size.
 664  * USB2.0 spec 9.6.6.
 665  */
 666 #define GET_MAX_PACKET(p)       ((p) & 0x7ff)
 667
 668 /* tx_info bitmasks */
 669 #define AVG_TRB_LENGTH_FOR_EP(p)        ((p) & 0xffff)
 670 #define MAX_ESIT_PAYLOAD_FOR_EP(p)      (((p) & 0xffff) << 16)
 671 #define CTX_TO_MAX_ESIT_PAYLOAD(p)      (((p) >> 16) & 0xffff)
 672
 673 /* deq bitmasks */
 674 #define EP_CTX_CYCLE_MASK               (1 << 0)
 675
 676
 677 /**
 678  * struct xhci_input_control_context
 679  * Input control context; see section 6.2.5.
 680  *
 681  * @drop_context:       set the bit of the endpoint context you want to disable
 682  * @add_context:        set the bit of the endpoint context you want to enable
 683  */
 684 struct xhci_input_control_ctx {
 685         __le32  drop_flags;
 686         __le32  add_flags;
 687         __le32  rsvd2[6];
 688 };
 689
 690 #define EP_IS_ADDED(ctrl_ctx, i) \
 691         (le32_to_cpu(ctrl_ctx->add_flags) & (1 << (i + 1)))
 692 #define EP_IS_DROPPED(ctrl_ctx, i)       \
 693         (le32_to_cpu(ctrl_ctx->drop_flags) & (1 << (i + 1)))
 694
 695 /* Represents everything that is needed to issue a command on the command ring.
 696  * It's useful to pre-allocate these for commands that cannot fail due to
 697  * out-of-memory errors, like freeing streams.
 698  */
 699 struct xhci_command {
 700         /* Input context for changing device state */
 701         struct xhci_container_ctx       *in_ctx;
 702         u32                             status;
 703         /* If completion is null, no one is waiting on this command
 704          * and the structure can be freed after the command completes.
 705          */
 706         struct completion               *completion;
 707         union xhci_trb                  *command_trb;
 708         struct list_head                cmd_list;
 709 };
 710
 711 /* drop context bitmasks */
 712 #define DROP_EP(x)      (0x1 << x)
 713 /* add context bitmasks */
 714 #define ADD_EP(x)       (0x1 << x)
 715
 716 struct xhci_stream_ctx {
 717         /* 64-bit stream ring address, cycle state, and stream type */
 718         __le64  stream_ring;
 719         /* offset 0x14 - 0x1f reserved for HC internal use */
 720         __le32  reserved[2];
 721 };
 722
 723 /* Stream Context Types (section 6.4.1) - bits 3:1 of stream ctx deq ptr */
 724 #define SCT_FOR_CTX(p)          (((p) << 1) & 0x7)
 725 /* Secondary stream array type, dequeue pointer is to a transfer ring */
 726 #define SCT_SEC_TR              0
 727 /* Primary stream array type, dequeue pointer is to a transfer ring */
 728 #define SCT_PRI_TR              1
 729 /* Dequeue pointer is for a secondary stream array (SSA) with 8 entries */
 730 #define SCT_SSA_8               2
 731 #define SCT_SSA_16              3
 732 #define SCT_SSA_32              4
 733 #define SCT_SSA_64              5
 734 #define SCT_SSA_128             6
 735 #define SCT_SSA_256             7
 736
 737 /* Assume no secondary streams for now */
 738 struct xhci_stream_info {
 739         struct xhci_ring                **stream_rings;
 740         /* Number of streams, including stream 0 (which drivers can't use) */
 741         unsigned int                    num_streams;
 742         /* The stream context array may be bigger than
 743          * the number of streams the driver asked for
 744          */
 745         struct xhci_stream_ctx          *stream_ctx_array;
 746         unsigned int                    num_stream_ctxs;
 747         dma_addr_t                      ctx_array_dma;
 748         /* For mapping physical TRB addresses to segments in stream rings */
 749         struct radix_tree_root          trb_address_map;
 750         struct xhci_command             *free_streams_command;
 751 };
 752
 753 #define SMALL_STREAM_ARRAY_SIZE         256
 754 #define MEDIUM_STREAM_ARRAY_SIZE        1024
 755
 756 /* Some Intel xHCI host controllers need software to keep track of the bus
 757  * bandwidth.  Keep track of endpoint info here.  Each root port is allocated
 758  * the full bus bandwidth.  We must also treat TTs (including each port under a
 759  * multi-TT hub) as a separate bandwidth domain.  The direct memory interface
 760  * (DMI) also limits the total bandwidth (across all domains) that can be used.
 761  */
 762 struct xhci_bw_info {
 763         /* ep_interval is zero-based */
 764         unsigned int            ep_interval;
 765         /* mult and num_packets are one-based */
 766         unsigned int            mult;
 767         unsigned int            num_packets;
 768         unsigned int            max_packet_size;
 769         unsigned int            max_esit_payload;
 770         unsigned int            type;
 771 };
 772
 773 /* "Block" sizes in bytes the hardware uses for different device speeds.
 774  * The logic in this part of the hardware limits the number of bits the hardware
 775  * can use, so must represent bandwidth in a less precise manner to mimic what
 776  * the scheduler hardware computes.
 777  */
 778 #define FS_BLOCK        1
 779 #define HS_BLOCK        4
 780 #define SS_BLOCK        16
 781 #define DMI_BLOCK       32
 782
 783 /* Each device speed has a protocol overhead (CRC, bit stuffing, etc) associated
 784  * with each byte transferred.  SuperSpeed devices have an initial overhead to
 785  * set up bursts.  These are in blocks, see above.  LS overhead has already been
 786  * translated into FS blocks.
 787  */
 788 #define DMI_OVERHEAD 8
 789 #define DMI_OVERHEAD_BURST 4
 790 #define SS_OVERHEAD 8
 791 #define SS_OVERHEAD_BURST 32
 792 #define HS_OVERHEAD 26
 793 #define FS_OVERHEAD 20
 794 #define LS_OVERHEAD 128
 795 /* The TTs need to claim roughly twice as much bandwidth (94 bytes per
 796  * microframe ~= 24Mbps) of the HS bus as the devices can actually use because
 797  * of overhead associated with split transfers crossing microframe boundaries.
 798  * 31 blocks is pure protocol overhead.
 799  */
 800 #define TT_HS_OVERHEAD (31 + 94)
 801 #define TT_DMI_OVERHEAD (25 + 12)
 802
 803 /* Bandwidth limits in blocks */
 804 #define FS_BW_LIMIT             1285
 805 #define TT_BW_LIMIT             1320
 806 #define HS_BW_LIMIT             1607
 807 #define SS_BW_LIMIT_IN          3906
 808 #define DMI_BW_LIMIT_IN         3906
 809 #define SS_BW_LIMIT_OUT         3906
 810 #define DMI_BW_LIMIT_OUT        3906
 811
 812 /* Percentage of bus bandwidth reserved for non-periodic transfers */
 813 #define FS_BW_RESERVED          10
 814 #define HS_BW_RESERVED          20
 815 #define SS_BW_RESERVED          10
 816
 817 struct xhci_virt_ep {
 818         struct xhci_ring                *ring;
 819         /* Related to endpoints that are configured to use stream IDs only */
 820         struct xhci_stream_info         *stream_info;
 821         /* Temporary storage in case the configure endpoint command fails and we
 822          * have to restore the device state to the previous state
 823          */
 824         struct xhci_ring                *new_ring;
 825         unsigned int                    ep_state;
 826 #define SET_DEQ_PENDING         (1 << 0)
 827 #define EP_HALTED               (1 << 1)        /* For stall handling */
 828 #define EP_HALT_PENDING         (1 << 2)        /* For URB cancellation */
 829 /* Transitioning the endpoint to using streams, don't enqueue URBs */
 830 #define EP_GETTING_STREAMS      (1 << 3)
 831 #define EP_HAS_STREAMS          (1 << 4)
 832 /* Transitioning the endpoint to not using streams, don't enqueue URBs */
 833 #define EP_GETTING_NO_STREAMS   (1 << 5)
 834         /* ----  Related to URB cancellation ---- */
 835         struct list_head        cancelled_td_list;
 836         /* The TRB that was last reported in a stopped endpoint ring */
 837         union xhci_trb          *stopped_trb;
 838         struct xhci_td          *stopped_td;
 839         unsigned int            stopped_stream;
 840         /* Watchdog timer for stop endpoint command to cancel URBs */
 841         struct timer_list       stop_cmd_timer;
 842         int                     stop_cmds_pending;
 843         struct xhci_hcd         *xhci;
 844         /* Dequeue pointer and dequeue segment for a submitted Set TR Dequeue
 845          * command.  We'll need to update the ring's dequeue segment and dequeue
 846          * pointer after the command completes.
 847          */
 848         struct xhci_segment     *queued_deq_seg;
 849         union xhci_trb          *queued_deq_ptr;
 850         /*
 851          * Sometimes the xHC can not process isochronous endpoint ring quickly
 852          * enough, and it will miss some isoc tds on the ring and generate
 853          * a Missed Service Error Event.
 854          * Set skip flag when receive a Missed Service Error Event and
 855          * process the missed tds on the endpoint ring.
 856          */
 857         bool                    skip;
 858         /* Bandwidth checking storage */
 859         struct xhci_bw_info     bw_info;
 860         struct list_head        bw_endpoint_list;
 861 };
 862
 863 enum xhci_overhead_type {
 864         LS_OVERHEAD_TYPE = 0,
 865         FS_OVERHEAD_TYPE,
 866         HS_OVERHEAD_TYPE,
 867 };
 868
 869 struct xhci_interval_bw {
 870         unsigned int            num_packets;
 871         /* Sorted by max packet size.
 872          * Head of the list is the greatest max packet size.
 873          */
 874         struct list_head        endpoints;
 875         /* How many endpoints of each speed are present. */
 876         unsigned int            overhead[3];
 877 };
 878
 879 #define XHCI_MAX_INTERVAL       16
 880
 881 struct xhci_interval_bw_table {
 882         unsigned int            interval0_esit_payload;
 883         struct xhci_interval_bw interval_bw[XHCI_MAX_INTERVAL];
 884         /* Includes reserved bandwidth for async endpoints */
 885         unsigned int            bw_used;
 886         unsigned int            ss_bw_in;
 887         unsigned int            ss_bw_out;
 888 };
 889
 890
 891 struct xhci_virt_device {
 892         struct usb_device               *udev;
 893         /*
 894          * Commands to the hardware are passed an "input context" that
 895          * tells the hardware what to change in its data structures.
 896          * The hardware will return changes in an "output context" that
 897          * software must allocate for the hardware.  We need to keep
 898          * track of input and output contexts separately because
 899          * these commands might fail and we don't trust the hardware.
 900          */
 901         struct xhci_container_ctx       *out_ctx;
 902         /* Used for addressing devices and configuration changes */
 903         struct xhci_container_ctx       *in_ctx;
 904         /* Rings saved to ensure old alt settings can be re-instated */
 905         struct xhci_ring                **ring_cache;
 906         int                             num_rings_cached;
 907         /* Store xHC assigned device address */
 908         int                             address;
 909 #define XHCI_MAX_RINGS_CACHED   31
 910         struct xhci_virt_ep             eps[31];
 911         struct completion               cmd_completion;
 912         /* Status of the last command issued for this device */
 913         u32                             cmd_status;
 914         struct list_head                cmd_list;
 915         u8                              fake_port;
 916         u8                              real_port;
 917         struct xhci_interval_bw_table   *bw_table;
 918         struct xhci_tt_bw_info          *tt_info;
 919         /* The current max exit latency for the enabled USB3 link states. */
 920         u16                             current_mel;
 921 };
 922
 923 /*
 924  * For each roothub, keep track of the bandwidth information for each periodic
 925  * interval.
 926  *
 927  * If a high speed hub is attached to the roothub, each TT associated with that
 928  * hub is a separate bandwidth domain.  The interval information for the
 929  * endpoints on the devices under that TT will appear in the TT structure.
 930  */
 931 struct xhci_root_port_bw_info {
 932         struct list_head                tts;
 933         unsigned int                    num_active_tts;
 934         struct xhci_interval_bw_table   bw_table;
 935 };
 936
 937 struct xhci_tt_bw_info {
 938         struct list_head                tt_list;
 939         int                             slot_id;
 940         int                             ttport;
 941         struct xhci_interval_bw_table   bw_table;
 942         int                             active_eps;
 943 };
 944
 945
 946 /**
 947  * struct xhci_device_context_array
 948  * @dev_context_ptr     array of 64-bit DMA addresses for device contexts
 949  */
 950 struct xhci_device_context_array {
 951         /* 64-bit device addresses; we only write 32-bit addresses */
 952         __le64                  dev_context_ptrs[MAX_HC_SLOTS];
 953         /* private xHCD pointers */
 954         dma_addr_t      dma;
 955 };
 956 /* TODO: write function to set the 64-bit device DMA address */
 957 /*
 958  * TODO: change this to be dynamically sized at HC mem init time since the HC
 959  * might not be able to handle the maximum number of devices possible.
 960  */
 961
 962
 963 struct xhci_transfer_event {
 964         /* 64-bit buffer address, or immediate data */
 965         __le64  buffer;
 966         __le32  transfer_len;
 967         /* This field is interpreted differently based on the type of TRB */
 968         __le32  flags;
 969 };
 970
 971 /** Transfer Event bit fields **/
 972 #define TRB_TO_EP_ID(p) (((p) >> 16) & 0x1f)
 973
 974 /* Completion Code - only applicable for some types of TRBs */
 975 #define COMP_CODE_MASK          (0xff << 24)
 976 #define GET_COMP_CODE(p)        (((p) & COMP_CODE_MASK) >> 24)
 977 #define COMP_SUCCESS    1
 978 /* Data Buffer Error */
 979 #define COMP_DB_ERR     2
 980 /* Babble Detected Error */
 981 #define COMP_BABBLE     3
 982 /* USB Transaction Error */
 983 #define COMP_TX_ERR     4
 984 /* TRB Error - some TRB field is invalid */
 985 #define COMP_TRB_ERR    5
 986 /* Stall Error - USB device is stalled */
 987 #define COMP_STALL      6
 988 /* Resource Error - HC doesn't have memory for that device configuration */
 989 #define COMP_ENOMEM     7
 990 /* Bandwidth Error - not enough room in schedule for this dev config */
 991 #define COMP_BW_ERR     8
 992 /* No Slots Available Error - HC ran out of device slots */
 993 #define COMP_ENOSLOTS   9
 994 /* Invalid Stream Type Error */
 995 #define COMP_STREAM_ERR 10
 996 /* Slot Not Enabled Error - doorbell rung for disabled device slot */
 997 #define COMP_EBADSLT    11
 998 /* Endpoint Not Enabled Error */
 999 #define COMP_EBADEP     12
1000 /* Short Packet */
1001 #define COMP_SHORT_TX   13
1002 /* Ring Underrun - doorbell rung for an empty isoc OUT ep ring */
1003 #define COMP_UNDERRUN   14
1004 /* Ring Overrun - isoc IN ep ring is empty when ep is scheduled to RX */
1005 #define COMP_OVERRUN    15
1006 /* Virtual Function Event Ring Full Error */
1007 #define COMP_VF_FULL    16
1008 /* Parameter Error - Context parameter is invalid */
1009 #define COMP_EINVAL     17
1010 /* Bandwidth Overrun Error - isoc ep exceeded its allocated bandwidth */
1011 #define COMP_BW_OVER    18
1012 /* Context State Error - illegal context state transition requested */
1013 #define COMP_CTX_STATE  19
1014 /* No Ping Response Error - HC didn't get PING_RESPONSE in time to TX */
1015 #define COMP_PING_ERR   20
1016 /* Event Ring is full */
1017 #define COMP_ER_FULL    21
1018 /* Incompatible Device Error */
1019 #define COMP_DEV_ERR    22
1020 /* Missed Service Error - HC couldn't service an isoc ep within interval */
1021 #define COMP_MISSED_INT 23
1022 /* Successfully stopped command ring */
1023 #define COMP_CMD_STOP   24
1024 /* Successfully aborted current command and stopped command ring */
1025 #define COMP_CMD_ABORT  25
1026 /* Stopped - transfer was terminated by a stop endpoint command */
1027 #define COMP_STOP       26
1028 /* Same as COMP_EP_STOPPED, but the transferred length in the event is invalid */
1029 #define COMP_STOP_INVAL 27
1030 /* Control Abort Error - Debug Capability - control pipe aborted */
1031 #define COMP_DBG_ABORT  28
1032 /* Max Exit Latency Too Large Error */
1033 #define COMP_MEL_ERR    29
1034 /* TRB type 30 reserved */
1035 /* Isoc Buffer Overrun - an isoc IN ep sent more data than could fit in TD */
1036 #define COMP_BUFF_OVER  31
1037 /* Event Lost Error - xHC has an "internal event overrun condition" */
1038 #define COMP_ISSUES     32
1039 /* Undefined Error - reported when other error codes don't apply */
1040 #define COMP_UNKNOWN    33
1041 /* Invalid Stream ID Error */
1042 #define COMP_STRID_ERR  34
1043 /* Secondary Bandwidth Error - may be returned by a Configure Endpoint cmd */
1044 #define COMP_2ND_BW_ERR 35
1045 /* Split Transaction Error */
1046 #define COMP_SPLIT_ERR  36
1047
1048 struct xhci_link_trb {
1049         /* 64-bit segment pointer*/
1050         __le64 segment_ptr;
1051         __le32 intr_target;
1052         __le32 control;
1053 };
1054
1055 /* control bitfields */
1056 #define LINK_TOGGLE     (0x1<<1)
1057
1058 /* Command completion event TRB */
1059 struct xhci_event_cmd {
1060         /* Pointer to command TRB, or the value passed by the event data trb */
1061         __le64 cmd_trb;
1062         __le32 status;
1063         __le32 flags;
1064 };
1065
1066 /* flags bitmasks */
1067 /* bits 16:23 are the virtual function ID */
1068 /* bits 24:31 are the slot ID */
1069 #define TRB_TO_SLOT_ID(p)       (((p) & (0xff<<24)) >> 24)
1070 #define SLOT_ID_FOR_TRB(p)      (((p) & 0xff) << 24)
1071
1072 /* Stop Endpoint TRB - ep_index to endpoint ID for this TRB */
1073 #define TRB_TO_EP_INDEX(p)              ((((p) & (0x1f << 16)) >> 16) - 1)
1074 #define EP_ID_FOR_TRB(p)                ((((p) + 1) & 0x1f) << 16)
1075
1076 #define SUSPEND_PORT_FOR_TRB(p)         (((p) & 1) << 23)
1077 #define TRB_TO_SUSPEND_PORT(p)          (((p) & (1 << 23)) >> 23)
1078 #define LAST_EP_INDEX                   30
1079
1080 /* Set TR Dequeue Pointer command TRB fields */
1081 #define TRB_TO_STREAM_ID(p)             ((((p) & (0xffff << 16)) >> 16))
1082 #define STREAM_ID_FOR_TRB(p)            ((((p)) & 0xffff) << 16)
1083
1084
1085 /* Port Status Change Event TRB fields */
1086 /* Port ID - bits 31:24 */
1087 #define GET_PORT_ID(p)          (((p) & (0xff << 24)) >> 24)
1088
1089 /* Normal TRB fields */
1090 /* transfer_len bitmasks - bits 0:16 */
1091 #define TRB_LEN(p)              ((p) & 0x1ffff)
1092 /* Interrupter Target - which MSI-X vector to target the completion event at */
1093 #define TRB_INTR_TARGET(p)      (((p) & 0x3ff) << 22)
1094 #define GET_INTR_TARGET(p)      (((p) >> 22) & 0x3ff)
1095 #define TRB_TBC(p)              (((p) & 0x3) << 7)
1096 #define TRB_TLBPC(p)            (((p) & 0xf) << 16)
1097
1098 /* Cycle bit - indicates TRB ownership by HC or HCD */
1099 #define TRB_CYCLE               (1<<0)
1100 /*
1101  * Force next event data TRB to be evaluated before task switch.
1102  * Used to pass OS data back after a TD completes.
1103  */
1104 #define TRB_ENT                 (1<<1)
1105 /* Interrupt on short packet */
1106 #define TRB_ISP                 (1<<2)
1107 /* Set PCIe no snoop attribute */
1108 #define TRB_NO_SNOOP            (1<<3)
1109 /* Chain multiple TRBs into a TD */
1110 #define TRB_CHAIN               (1<<4)
1111 /* Interrupt on completion */
1112 #define TRB_IOC                 (1<<5)
1113 /* The buffer pointer contains immediate data */
1114 #define TRB_IDT                 (1<<6)
1115
1116 /* Block Event Interrupt */
1117 #define TRB_BEI                 (1<<9)
1118
1119 /* Control transfer TRB specific fields */
1120 #define TRB_DIR_IN              (1<<16)
1121 #define TRB_TX_TYPE(p)          ((p) << 16)
1122 #define TRB_DATA_OUT            2
1123 #define TRB_DATA_IN             3
1124
1125 /* Isochronous TRB specific fields */
1126 #define TRB_SIA                 (1<<31)
1127
1128 struct xhci_generic_trb {
1129         __le32 field[4];
1130 };
1131
1132 union xhci_trb {
1133         struct xhci_link_trb            link;
1134         struct xhci_transfer_event      trans_event;
1135         struct xhci_event_cmd           event_cmd;
1136         struct xhci_generic_trb         generic;
1137 };
1138
1139 /* TRB bit mask */
1140 #define TRB_TYPE_BITMASK        (0xfc00)
1141 #define TRB_TYPE(p)             ((p) << 10)
1142 #define TRB_FIELD_TO_TYPE(p)    (((p) & TRB_TYPE_BITMASK) >> 10)
1143 /* TRB type IDs */
1144 /* bulk, interrupt, isoc scatter/gather, and control data stage */
1145 #define TRB_NORMAL              1
1146 /* setup stage for control transfers */
1147 #define TRB_SETUP               2
1148 /* data stage for control transfers */
1149 #define TRB_DATA                3
1150 /* status stage for control transfers */
1151 #define TRB_STATUS              4
1152 /* isoc transfers */
1153 #define TRB_ISOC                5
1154 /* TRB for linking ring segments */
1155 #define TRB_LINK                6
1156 #define TRB_EVENT_DATA          7
1157 /* Transfer Ring No-op (not for the command ring) */
1158 #define TRB_TR_NOOP             8
1159 /* Command TRBs */
1160 /* Enable Slot Command */
1161 #define TRB_ENABLE_SLOT         9
1162 /* Disable Slot Command */
1163 #define TRB_DISABLE_SLOT        10
1164 /* Address Device Command */
1165 #define TRB_ADDR_DEV            11
1166 /* Configure Endpoint Command */
1167 #define TRB_CONFIG_EP           12
1168 /* Evaluate Context Command */
1169 #define TRB_EVAL_CONTEXT        13
1170 /* Reset Endpoint Command */
1171 #define TRB_RESET_EP            14
1172 /* Stop Transfer Ring Command */
1173 #define TRB_STOP_RING           15
1174 /* Set Transfer Ring Dequeue Pointer Command */
1175 #define TRB_SET_DEQ             16
1176 /* Reset Device Command */
1177 #define TRB_RESET_DEV           17
1178 /* Force Event Command (opt) */
1179 #define TRB_FORCE_EVENT         18
1180 /* Negotiate Bandwidth Command (opt) */
1181 #define TRB_NEG_BANDWIDTH       19
1182 /* Set Latency Tolerance Value Command (opt) */
1183 #define TRB_SET_LT              20
1184 /* Get port bandwidth Command */
1185 #define TRB_GET_BW              21
1186 /* Force Header Command - generate a transaction or link management packet */
1187 #define TRB_FORCE_HEADER        22
1188 /* No-op Command - not for transfer rings */
1189 #define TRB_CMD_NOOP            23
1190 /* TRB IDs 24-31 reserved */
1191 /* Event TRBS */
1192 /* Transfer Event */
1193 #define TRB_TRANSFER            32
1194 /* Command Completion Event */
1195 #define TRB_COMPLETION          33
1196 /* Port Status Change Event */
1197 #define TRB_PORT_STATUS         34
1198 /* Bandwidth Request Event (opt) */
1199 #define TRB_BANDWIDTH_EVENT     35
1200 /* Doorbell Event (opt) */
1201 #define TRB_DOORBELL            36
1202 /* Host Controller Event */
1203 #define TRB_HC_EVENT            37
1204 /* Device Notification Event - device sent function wake notification */
1205 #define TRB_DEV_NOTE            38
1206 /* MFINDEX Wrap Event - microframe counter wrapped */
1207 #define TRB_MFINDEX_WRAP        39
1208 /* TRB IDs 40-47 reserved, 48-63 is vendor-defined */
1209
1210 /* Nec vendor-specific command completion event. */
1211 #define TRB_NEC_CMD_COMP        48
1212 /* Get NEC firmware revision. */
1213 #define TRB_NEC_GET_FW          49
1214
1215 #define TRB_TYPE_LINK(x)        (((x) & TRB_TYPE_BITMASK) == TRB_TYPE(TRB_LINK))
1216 /* Above, but for __le32 types -- can avoid work by swapping constants: */
1217 #define TRB_TYPE_LINK_LE32(x)   (((x) & cpu_to_le32(TRB_TYPE_BITMASK)) == \
1218                                  cpu_to_le32(TRB_TYPE(TRB_LINK)))
1219 #define TRB_TYPE_NOOP_LE32(x)   (((x) & cpu_to_le32(TRB_TYPE_BITMASK)) == \
1220                                  cpu_to_le32(TRB_TYPE(TRB_TR_NOOP)))
1221
1222 #define NEC_FW_MINOR(p)         (((p) >> 0) & 0xff)
1223 #define NEC_FW_MAJOR(p)         (((p) >> 8) & 0xff)
1224
1225 /*
1226  * TRBS_PER_SEGMENT must be a multiple of 4,
1227  * since the command ring is 64-byte aligned.
1228  * It must also be greater than 16.
1229  */
1230 #define TRBS_PER_SEGMENT        64
1231 /* Allow two commands + a link TRB, along with any reserved command TRBs */
1232 #define MAX_RSVD_CMD_TRBS       (TRBS_PER_SEGMENT - 3)
1233 #define SEGMENT_SIZE            (TRBS_PER_SEGMENT*16)
1234 #define SEGMENT_SHIFT           (__ffs(SEGMENT_SIZE))
1235 /* TRB buffer pointers can't cross 64KB boundaries */
1236 #define TRB_MAX_BUFF_SHIFT              16
1237 #define TRB_MAX_BUFF_SIZE       (1 << TRB_MAX_BUFF_SHIFT)
1238
1239 struct xhci_segment {
1240         union xhci_trb          *trbs;
1241         /* private to HCD */
1242         struct xhci_segment     *next;
1243         dma_addr_t              dma;
1244 };
1245
1246 struct xhci_td {
1247         struct list_head        td_list;
1248         struct list_head        cancelled_td_list;
1249         struct urb              *urb;
1250         struct xhci_segment     *start_seg;
1251         union xhci_trb          *first_trb;
1252         union xhci_trb          *last_trb;
1253 };
1254
1255 struct xhci_dequeue_state {
1256         struct xhci_segment *new_deq_seg;
1257         union xhci_trb *new_deq_ptr;
1258         int new_cycle_state;
1259 };
1260
1261 enum xhci_ring_type {
1262         TYPE_CTRL = 0,
1263         TYPE_ISOC,
1264         TYPE_BULK,
1265         TYPE_INTR,
1266         TYPE_STREAM,
1267         TYPE_COMMAND,
1268         TYPE_EVENT,
1269 };
1270
1271 struct xhci_ring {
1272         struct xhci_segment     *first_seg;
1273         struct xhci_segment     *last_seg;
1274         union  xhci_trb         *enqueue;
1275         struct xhci_segment     *enq_seg;
1276         unsigned int            enq_updates;
1277         union  xhci_trb         *dequeue;
1278         struct xhci_segment     *deq_seg;
1279         unsigned int            deq_updates;
1280         struct list_head        td_list;
1281         /*
1282          * Write the cycle state into the TRB cycle field to give ownership of
1283          * the TRB to the host controller (if we are the producer), or to check
1284          * if we own the TRB (if we are the consumer).  See section 4.9.1.
1285          */
1286         u32                     cycle_state;
1287         unsigned int            stream_id;
1288         unsigned int            num_segs;
1289         unsigned int            num_trbs_free;
1290         unsigned int            num_trbs_free_temp;
1291         enum xhci_ring_type     type;
1292         bool                    last_td_was_short;
1293 };
1294
1295 struct xhci_erst_entry {
1296         /* 64-bit event ring segment address */
1297         __le64  seg_addr;
1298         __le32  seg_size;
1299         /* Set to zero */
1300         __le32  rsvd;
1301 };
1302
1303 struct xhci_erst {
1304         struct xhci_erst_entry  *entries;
1305         unsigned int            num_entries;
1306         /* xhci->event_ring keeps track of segment dma addresses */
1307         dma_addr_t              erst_dma_addr;
1308         /* Num entries the ERST can contain */
1309         unsigned int            erst_size;
1310 };
1311
1312 struct xhci_scratchpad {
1313         u64 *sp_array;
1314         dma_addr_t sp_dma;
1315         void **sp_buffers;
1316         dma_addr_t *sp_dma_buffers;
1317 };
1318
1319 struct urb_priv {
1320         int     length;
1321         int     td_cnt;
1322         struct  xhci_td *td[0];
1323 };
1324
1325 /*
1326  * Each segment table entry is 4*32bits long.  1K seems like an ok size:
1327  * (1K bytes * 8bytes/bit) / (4*32 bits) = 64 segment entries in the table,
1328  * meaning 64 ring segments.
1329  * Initial allocated size of the ERST, in number of entries */
1330 #define ERST_NUM_SEGS   1
1331 /* Initial allocated size of the ERST, in number of entries */
1332 #define ERST_SIZE       64
1333 /* Initial number of event segment rings allocated */
1334 #define ERST_ENTRIES    1
1335 /* Poll every 60 seconds */
1336 #define POLL_TIMEOUT    60
1337 /* Stop endpoint command timeout (secs) for URB cancellation watchdog timer */
1338 #define XHCI_STOP_EP_CMD_TIMEOUT        5
1339 /* XXX: Make these module parameters */
1340
1341 struct s3_save {
1342         u32     command;
1343         u32     dev_nt;
1344         u64     dcbaa_ptr;
1345         u32     config_reg;
1346         u32     irq_pending;
1347         u32     irq_control;
1348         u32     erst_size;
1349         u64     erst_base;
1350         u64     erst_dequeue;
1351 };
1352
1353 /* Use for lpm */
1354 struct dev_info {
1355         u32                     dev_id;
1356         struct  list_head       list;
1357 };
1358
1359 struct xhci_bus_state {
1360         unsigned long           bus_suspended;
1361         unsigned long           next_statechange;
1362
1363         /* Port suspend arrays are indexed by the portnum of the fake roothub */
1364         /* ports suspend status arrays - max 31 ports for USB2, 15 for USB3 */
1365         u32                     port_c_suspend;
1366         u32                     suspended_ports;
1367         u32                     port_remote_wakeup;
1368         unsigned long           resume_done[USB_MAXCHILDREN];
1369         /* which ports have started to resume */
1370         unsigned long           resuming_ports;
1371 };
1372
1373 static inline unsigned int hcd_index(struct usb_hcd *hcd)
1374 {
1375         if (hcd->speed == HCD_USB3)
1376                 return 0;
1377         else
1378                 return 1;
1379 }
1380
1381 /* There is one xhci_hcd structure per controller */
1382 struct xhci_hcd {
1383         struct usb_hcd *main_hcd;
1384         struct usb_hcd *shared_hcd;
1385         /* glue to PCI and HCD framework */
1386         struct xhci_cap_regs __iomem *cap_regs;
1387         struct xhci_op_regs __iomem *op_regs;
1388         struct xhci_run_regs __iomem *run_regs;
1389         struct xhci_doorbell_array __iomem *dba;
1390         /* Our HCD's current interrupter register set */
1391         struct  xhci_intr_reg __iomem *ir_set;
1392
1393         /* Cached register copies of read-only HC data */
1394         __u32           hcs_params1;
1395         __u32           hcs_params2;
1396         __u32           hcs_params3;
1397         __u32           hcc_params;
1398
1399         spinlock_t      lock;
1400
1401         /* packed release number */
1402         u8              sbrn;
1403         u16             hci_version;
1404         u8              max_slots;
1405         u8              max_interrupters;
1406         u8              max_ports;
1407         u8              isoc_threshold;
1408         int             event_ring_max;
1409         int             addr_64;
1410         /* 4KB min, 128MB max */
1411         int             page_size;
1412         /* Valid values are 12 to 20, inclusive */
1413         int             page_shift;
1414         /* msi-x vectors */
1415         int             msix_count;
1416         struct msix_entry       *msix_entries;
1417         /* data structures */
1418         struct xhci_device_context_array *dcbaa;
1419         struct xhci_ring        *cmd_ring;
1420         unsigned int            cmd_ring_reserved_trbs;
1421         struct xhci_ring        *event_ring;
1422         struct xhci_erst        erst;
1423         /* Scratchpad */
1424         struct xhci_scratchpad  *scratchpad;
1425         /* Store LPM test failed devices' information */
1426         struct list_head        lpm_failed_devs;
1427
1428         /* slot enabling and address device helpers */
1429         struct completion       addr_dev;
1430         int slot_id;
1431         /* For USB 3.0 LPM enable/disable. */
1432         struct xhci_command             *lpm_command;
1433         /* Internal mirror of the HW's dcbaa */
1434         struct xhci_virt_device *devs[MAX_HC_SLOTS];
1435         /* For keeping track of bandwidth domains per roothub. */
1436         struct xhci_root_port_bw_info   *rh_bw;
1437
1438         /* DMA pools */
1439         struct dma_pool *device_pool;
1440         struct dma_pool *segment_pool;
1441         struct dma_pool *small_streams_pool;
1442         struct dma_pool *medium_streams_pool;
1443
1444 #ifdef CONFIG_USB_XHCI_HCD_DEBUGGING
1445         /* Poll the rings - for debugging */
1446         struct timer_list       event_ring_timer;
1447         int                     zombie;
1448 #endif
1449         /* Host controller watchdog timer structures */
1450         unsigned int            xhc_state;
1451
1452         u32                     command;
1453         struct s3_save          s3;
1454 /* Host controller is dying - not responding to commands. "I'm not dead yet!"
1455  *
1456  * xHC interrupts have been disabled and a watchdog timer will (or has already)
1457  * halt the xHCI host, and complete all URBs with an -ESHUTDOWN code.  Any code
1458  * that sees this status (other than the timer that set it) should stop touching
1459  * hardware immediately.  Interrupt handlers should return immediately when
1460  * they see this status (any time they drop and re-acquire xhci->lock).
1461  * xhci_urb_dequeue() should call usb_hcd_check_unlink_urb() and return without
1462  * putting the TD on the canceled list, etc.
1463  *
1464  * There are no reports of xHCI host controllers that display this issue.
1465  */
1466 #define XHCI_STATE_DYING        (1 << 0)
1467 #define XHCI_STATE_HALTED       (1 << 1)
1468         /* Statistics */
1469         int                     error_bitmask;
1470         unsigned int            quirks;
1471 #define XHCI_LINK_TRB_QUIRK     (1 << 0)
1472 #define XHCI_RESET_EP_QUIRK     (1 << 1)
1473 #define XHCI_NEC_HOST           (1 << 2)
1474 #define XHCI_AMD_PLL_FIX        (1 << 3)
1475 #define XHCI_SPURIOUS_SUCCESS   (1 << 4)
1476 /*
1477  * Certain Intel host controllers have a limit to the number of endpoint
1478  * contexts they can handle.  Ideally, they would signal that they can't handle
1479  * anymore endpoint contexts by returning a Resource Error for the Configure
1480  * Endpoint command, but they don't.  Instead they expect software to keep track
1481  * of the number of active endpoints for them, across configure endpoint
1482  * commands, reset device commands, disable slot commands, and address device
1483  * commands.
1484  */
1485 #define XHCI_EP_LIMIT_QUIRK     (1 << 5)
1486 #define XHCI_BROKEN_MSI         (1 << 6)
1487 #define XHCI_RESET_ON_RESUME    (1 << 7)
1488 #define XHCI_SW_BW_CHECKING     (1 << 8)
1489 #define XHCI_AMD_0x96_HOST      (1 << 9)
1490 #define XHCI_TRUST_TX_LENGTH    (1 << 10)
1491 #define XHCI_LPM_SUPPORT        (1 << 11)
1492 #define XHCI_INTEL_HOST         (1 << 12)
1493         unsigned int            num_active_eps;
1494         unsigned int            limit_active_eps;
1495         /* There are two roothubs to keep track of bus suspend info for */
1496         struct xhci_bus_state   bus_state[2];
1497         /* Is each xHCI roothub port a USB 3.0, USB 2.0, or USB 1.1 port? */
1498         u8                      *port_array;
1499         /* Array of pointers to USB 3.0 PORTSC registers */
1500         __le32 __iomem          **usb3_ports;
1501         unsigned int            num_usb3_ports;
1502         /* Array of pointers to USB 2.0 PORTSC registers */
1503         __le32 __iomem          **usb2_ports;
1504         unsigned int            num_usb2_ports;
1505         /* support xHCI 0.96 spec USB2 software LPM */
1506         unsigned                sw_lpm_support:1;
1507         /* support xHCI 1.0 spec USB2 hardware LPM */
1508         unsigned                hw_lpm_support:1;
1509 };
1510
1511 /* convert between an HCD pointer and the corresponding EHCI_HCD */
1512 static inline struct xhci_hcd *hcd_to_xhci(struct usb_hcd *hcd)
1513 {
1514         return *((struct xhci_hcd **) (hcd->hcd_priv));
1515 }
1516
1517 static inline struct usb_hcd *xhci_to_hcd(struct xhci_hcd *xhci)
1518 {
1519         return xhci->main_hcd;
1520 }
1521
1522 #ifdef CONFIG_USB_XHCI_HCD_DEBUGGING
1523 #define XHCI_DEBUG      1
1524 #else
1525 #define XHCI_DEBUG      0
1526 #endif
1527
1528 #define xhci_dbg(xhci, fmt, args...) \
1529         do { if (XHCI_DEBUG) dev_dbg(xhci_to_hcd(xhci)->self.controller , fmt , ## args); } while (0)
1530 #define xhci_info(xhci, fmt, args...) \
1531         do { if (XHCI_DEBUG) dev_info(xhci_to_hcd(xhci)->self.controller , fmt , ## args); } while (0)
1532 #define xhci_err(xhci, fmt, args...) \
1533         dev_err(xhci_to_hcd(xhci)->self.controller , fmt , ## args)
1534 #define xhci_warn(xhci, fmt, args...) \
1535         dev_warn(xhci_to_hcd(xhci)->self.controller , fmt , ## args)
1536
1537 /* TODO: copied from ehci.h - can be refactored? */
1538 /* xHCI spec says all registers are little endian */
1539 static inline unsigned int xhci_readl(const struct xhci_hcd *xhci,
1540                 __le32 __iomem *regs)
1541 {
1542         return readl(regs);
1543 }
1544 static inline void xhci_writel(struct xhci_hcd *xhci,
1545                 const unsigned int val, __le32 __iomem *regs)
1546 {
1547         writel(val, regs);
1548 }
1549
1550 /*
1551  * Registers should always be accessed with double word or quad word accesses.
1552  *
1553  * Some xHCI implementations may support 64-bit address pointers.  Registers
1554  * with 64-bit address pointers should be written to with dword accesses by
1555  * writing the low dword first (ptr[0]), then the high dword (ptr[1]) second.
1556  * xHCI implementations that do not support 64-bit address pointers will ignore
1557  * the high dword, and write order is irrelevant.
1558  */
1559 static inline u64 xhci_read_64(const struct xhci_hcd *xhci,
1560                 __le64 __iomem *regs)
1561 {
1562         __u32 __iomem *ptr = (__u32 __iomem *) regs;
1563         u64 val_lo = readl(ptr);
1564         u64 val_hi = readl(ptr + 1);
1565         return val_lo + (val_hi << 32);
1566 }
1567 static inline void xhci_write_64(struct xhci_hcd *xhci,
1568                                  const u64 val, __le64 __iomem *regs)
1569 {
1570         __u32 __iomem *ptr = (__u32 __iomem *) regs;
1571         u32 val_lo = lower_32_bits(val);
1572         u32 val_hi = upper_32_bits(val);
1573
1574         writel(val_lo, ptr);
1575         writel(val_hi, ptr + 1);
1576 }
1577
1578 static inline int xhci_link_trb_quirk(struct xhci_hcd *xhci)
1579 {
1580         return xhci->quirks & XHCI_LINK_TRB_QUIRK;
1581 }
1582
1583 /* xHCI debugging */
1584 void xhci_print_ir_set(struct xhci_hcd *xhci, int set_num);
1585 void xhci_print_registers(struct xhci_hcd *xhci);
1586 void xhci_dbg_regs(struct xhci_hcd *xhci);
1587 void xhci_print_run_regs(struct xhci_hcd *xhci);
1588 void xhci_print_trb_offsets(struct xhci_hcd *xhci, union xhci_trb *trb);
1589 void xhci_debug_trb(struct xhci_hcd *xhci, union xhci_trb *trb);
1590 void xhci_debug_segment(struct xhci_hcd *xhci, struct xhci_segment *seg);
1591 void xhci_debug_ring(struct xhci_hcd *xhci, struct xhci_ring *ring);
1592 void xhci_dbg_erst(struct xhci_hcd *xhci, struct xhci_erst *erst);
1593 void xhci_dbg_cmd_ptrs(struct xhci_hcd *xhci);
1594 void xhci_dbg_ring_ptrs(struct xhci_hcd *xhci, struct xhci_ring *ring);
1595 void xhci_dbg_ctx(struct xhci_hcd *xhci, struct xhci_container_ctx *ctx, unsigned int last_ep);
1596 char *xhci_get_slot_state(struct xhci_hcd *xhci,
1597                 struct xhci_container_ctx *ctx);
1598 void xhci_dbg_ep_rings(struct xhci_hcd *xhci,
1599                 unsigned int slot_id, unsigned int ep_index,
1600                 struct xhci_virt_ep *ep);
1601
1602 /* xHCI memory management */
1603 void xhci_mem_cleanup(struct xhci_hcd *xhci);
1604 int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags);
1605 void xhci_free_virt_device(struct xhci_hcd *xhci, int slot_id);
1606 int xhci_alloc_virt_device(struct xhci_hcd *xhci, int slot_id, struct usb_device *udev, gfp_t flags);
1607 int xhci_setup_addressable_virt_dev(struct xhci_hcd *xhci, struct usb_device *udev);
1608 void xhci_copy_ep0_dequeue_into_input_ctx(struct xhci_hcd *xhci,
1609                 struct usb_device *udev);
1610 unsigned int xhci_get_endpoint_index(struct usb_endpoint_descriptor *desc);
1611 unsigned int xhci_get_endpoint_flag(struct usb_endpoint_descriptor *desc);
1612 unsigned int xhci_get_endpoint_flag_from_index(unsigned int ep_index);
1613 unsigned int xhci_last_valid_endpoint(u32 added_ctxs);
1614 void xhci_endpoint_zero(struct xhci_hcd *xhci, struct xhci_virt_device *virt_dev, struct usb_host_endpoint *ep);
1615 void xhci_drop_ep_from_interval_table(struct xhci_hcd *xhci,
1616                 struct xhci_bw_info *ep_bw,
1617                 struct xhci_interval_bw_table *bw_table,
1618                 struct usb_device *udev,
1619                 struct xhci_virt_ep *virt_ep,
1620                 struct xhci_tt_bw_info *tt_info);
1621 void xhci_update_tt_active_eps(struct xhci_hcd *xhci,
1622                 struct xhci_virt_device *virt_dev,
1623                 int old_active_eps);
1624 void xhci_clear_endpoint_bw_info(struct xhci_bw_info *bw_info);
1625 void xhci_update_bw_info(struct xhci_hcd *xhci,
1626                 struct xhci_container_ctx *in_ctx,
1627                 struct xhci_input_control_ctx *ctrl_ctx,
1628                 struct xhci_virt_device *virt_dev);
1629 void xhci_endpoint_copy(struct xhci_hcd *xhci,
1630                 struct xhci_container_ctx *in_ctx,
1631                 struct xhci_container_ctx *out_ctx,
1632                 unsigned int ep_index);
1633 void xhci_slot_copy(struct xhci_hcd *xhci,
1634                 struct xhci_container_ctx *in_ctx,
1635                 struct xhci_container_ctx *out_ctx);
1636 int xhci_endpoint_init(struct xhci_hcd *xhci, struct xhci_virt_device *virt_dev,
1637                 struct usb_device *udev, struct usb_host_endpoint *ep,
1638                 gfp_t mem_flags);
1639 void xhci_ring_free(struct xhci_hcd *xhci, struct xhci_ring *ring);
1640 int xhci_ring_expansion(struct xhci_hcd *xhci, struct xhci_ring *ring,
1641                                 unsigned int num_trbs, gfp_t flags);
1642 void xhci_free_or_cache_endpoint_ring(struct xhci_hcd *xhci,
1643                 struct xhci_virt_device *virt_dev,
1644                 unsigned int ep_index);
1645 struct xhci_stream_info *xhci_alloc_stream_info(struct xhci_hcd *xhci,
1646                 unsigned int num_stream_ctxs,
1647                 unsigned int num_streams, gfp_t flags);
1648 void xhci_free_stream_info(struct xhci_hcd *xhci,
1649                 struct xhci_stream_info *stream_info);
1650 void xhci_setup_streams_ep_input_ctx(struct xhci_hcd *xhci,
1651                 struct xhci_ep_ctx *ep_ctx,
1652                 struct xhci_stream_info *stream_info);
1653 void xhci_setup_no_streams_ep_input_ctx(struct xhci_hcd *xhci,
1654                 struct xhci_ep_ctx *ep_ctx,
1655                 struct xhci_virt_ep *ep);
1656 void xhci_free_device_endpoint_resources(struct xhci_hcd *xhci,
1657         struct xhci_virt_device *virt_dev, bool drop_control_ep);
1658 struct xhci_ring *xhci_dma_to_transfer_ring(
1659                 struct xhci_virt_ep *ep,
1660                 u64 address);
1661 struct xhci_ring *xhci_stream_id_to_ring(
1662                 struct xhci_virt_device *dev,
1663                 unsigned int ep_index,
1664                 unsigned int stream_id);
1665 struct xhci_command *xhci_alloc_command(struct xhci_hcd *xhci,
1666                 bool allocate_in_ctx, bool allocate_completion,
1667                 gfp_t mem_flags);
1668 void xhci_urb_free_priv(struct xhci_hcd *xhci, struct urb_priv *urb_priv);
1669 void xhci_free_command(struct xhci_hcd *xhci,
1670                 struct xhci_command *command);
1671
1672 #ifdef CONFIG_PCI
1673 /* xHCI PCI glue */
1674 int xhci_register_pci(void);
1675 void xhci_unregister_pci(void);
1676 #else
1677 static inline int xhci_register_pci(void) { return 0; }
1678 static inline void xhci_unregister_pci(void) {}
1679 #endif
1680
1681 #if defined(CONFIG_USB_XHCI_PLATFORM) \
1682         || defined(CONFIG_USB_XHCI_PLATFORM_MODULE)
1683 int xhci_register_plat(void);
1684 void xhci_unregister_plat(void);
1685 #else
1686 static inline int xhci_register_plat(void)
1687 { return 0; }
1688 static inline void xhci_unregister_plat(void)
1689 {  }
1690 #endif
1691
1692 /* xHCI host controller glue */
1693 typedef void (*xhci_get_quirks_t)(struct device *, struct xhci_hcd *);
1694 void xhci_quiesce(struct xhci_hcd *xhci);
1695 int xhci_halt(struct xhci_hcd *xhci);
1696 int xhci_reset(struct xhci_hcd *xhci);
1697 int xhci_init(struct usb_hcd *hcd);
1698 int xhci_run(struct usb_hcd *hcd);
1699 void xhci_stop(struct usb_hcd *hcd);
1700 void xhci_shutdown(struct usb_hcd *hcd);
1701 int xhci_gen_setup(struct usb_hcd *hcd, xhci_get_quirks_t get_quirks);
1702
1703 #ifdef  CONFIG_PM
1704 int xhci_suspend(struct xhci_hcd *xhci);
1705 int xhci_resume(struct xhci_hcd *xhci, bool hibernated);
1706 #else
1707 #define xhci_suspend    NULL
1708 #define xhci_resume     NULL
1709 #endif
1710
1711 int xhci_get_frame(struct usb_hcd *hcd);
1712 irqreturn_t xhci_irq(struct usb_hcd *hcd);
1713 irqreturn_t xhci_msi_irq(int irq, struct usb_hcd *hcd);
1714 int xhci_alloc_dev(struct usb_hcd *hcd, struct usb_device *udev);
1715 void xhci_free_dev(struct usb_hcd *hcd, struct usb_device *udev);
1716 int xhci_alloc_tt_info(struct xhci_hcd *xhci,
1717                 struct xhci_virt_device *virt_dev,
1718                 struct usb_device *hdev,
1719                 struct usb_tt *tt, gfp_t mem_flags);
1720 int xhci_alloc_streams(struct usb_hcd *hcd, struct usb_device *udev,
1721                 struct usb_host_endpoint **eps, unsigned int num_eps,
1722                 unsigned int num_streams, gfp_t mem_flags);
1723 int xhci_free_streams(struct usb_hcd *hcd, struct usb_device *udev,
1724                 struct usb_host_endpoint **eps, unsigned int num_eps,
1725                 gfp_t mem_flags);
1726 int xhci_address_device(struct usb_hcd *hcd, struct usb_device *udev);
1727 int xhci_update_device(struct usb_hcd *hcd, struct usb_device *udev);
1728 int xhci_set_usb2_hardware_lpm(struct usb_hcd *hcd,
1729                                 struct usb_device *udev, int enable);
1730 int xhci_update_hub_device(struct usb_hcd *hcd, struct usb_device *hdev,
1731                         struct usb_tt *tt, gfp_t mem_flags);
1732 int xhci_urb_enqueue(struct usb_hcd *hcd, struct urb *urb, gfp_t mem_flags);
1733 int xhci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status);
1734 int xhci_add_endpoint(struct usb_hcd *hcd, struct usb_device *udev, struct usb_host_endpoint *ep);
1735 int xhci_drop_endpoint(struct usb_hcd *hcd, struct usb_device *udev, struct usb_host_endpoint *ep);
1736 void xhci_endpoint_reset(struct usb_hcd *hcd, struct usb_host_endpoint *ep);
1737 int xhci_discover_or_reset_device(struct usb_hcd *hcd, struct usb_device *udev);
1738 int xhci_check_bandwidth(struct usb_hcd *hcd, struct usb_device *udev);
1739 void xhci_reset_bandwidth(struct usb_hcd *hcd, struct usb_device *udev);
1740
1741 /* xHCI ring, segment, TRB, and TD functions */
1742 dma_addr_t xhci_trb_virt_to_dma(struct xhci_segment *seg, union xhci_trb *trb);
1743 struct xhci_segment *trb_in_td(struct xhci_segment *start_seg,
1744                 union xhci_trb *start_trb, union xhci_trb *end_trb,
1745                 dma_addr_t suspect_dma);
1746 int xhci_is_vendor_info_code(struct xhci_hcd *xhci, unsigned int trb_comp_code);
1747 void xhci_ring_cmd_db(struct xhci_hcd *xhci);
1748 int xhci_queue_slot_control(struct xhci_hcd *xhci, u32 trb_type, u32 slot_id);
1749 int xhci_queue_address_device(struct xhci_hcd *xhci, dma_addr_t in_ctx_ptr,
1750                 u32 slot_id);
1751 int xhci_queue_vendor_command(struct xhci_hcd *xhci,
1752                 u32 field1, u32 field2, u32 field3, u32 field4);
1753 int xhci_queue_stop_endpoint(struct xhci_hcd *xhci, int slot_id,
1754                 unsigned int ep_index, int suspend);
1755 int xhci_queue_ctrl_tx(struct xhci_hcd *xhci, gfp_t mem_flags, struct urb *urb,
1756                 int slot_id, unsigned int ep_index);
1757 int xhci_queue_bulk_tx(struct xhci_hcd *xhci, gfp_t mem_flags, struct urb *urb,
1758                 int slot_id, unsigned int ep_index);
1759 int xhci_queue_intr_tx(struct xhci_hcd *xhci, gfp_t mem_flags, struct urb *urb,
1760                 int slot_id, unsigned int ep_index);
1761 int xhci_queue_isoc_tx_prepare(struct xhci_hcd *xhci, gfp_t mem_flags,
1762                 struct urb *urb, int slot_id, unsigned int ep_index);
1763 int xhci_queue_configure_endpoint(struct xhci_hcd *xhci, dma_addr_t in_ctx_ptr,
1764                 u32 slot_id, bool command_must_succeed);
1765 int xhci_queue_evaluate_context(struct xhci_hcd *xhci, dma_addr_t in_ctx_ptr,
1766                 u32 slot_id, bool command_must_succeed);
1767 int xhci_queue_reset_ep(struct xhci_hcd *xhci, int slot_id,
1768                 unsigned int ep_index);
1769 int xhci_queue_reset_device(struct xhci_hcd *xhci, u32 slot_id);
1770 void xhci_find_new_dequeue_state(struct xhci_hcd *xhci,
1771                 unsigned int slot_id, unsigned int ep_index,
1772                 unsigned int stream_id, struct xhci_td *cur_td,
1773                 struct xhci_dequeue_state *state);
1774 void xhci_queue_new_dequeue_state(struct xhci_hcd *xhci,
1775                 unsigned int slot_id, unsigned int ep_index,
1776                 unsigned int stream_id,
1777                 struct xhci_dequeue_state *deq_state);
1778 void xhci_cleanup_stalled_ring(struct xhci_hcd *xhci,
1779                 struct usb_device *udev, unsigned int ep_index);
1780 void xhci_queue_config_ep_quirk(struct xhci_hcd *xhci,
1781                 unsigned int slot_id, unsigned int ep_index,
1782                 struct xhci_dequeue_state *deq_state);
1783 void xhci_stop_endpoint_command_watchdog(unsigned long arg);
1784 void xhci_ring_ep_doorbell(struct xhci_hcd *xhci, unsigned int slot_id,
1785                 unsigned int ep_index, unsigned int stream_id);
1786
1787 /* xHCI roothub code */
1788 void xhci_set_link_state(struct xhci_hcd *xhci, __le32 __iomem **port_array,
1789                                 int port_id, u32 link_state);
1790 int xhci_enable_usb3_lpm_timeout(struct usb_hcd *hcd,
1791                         struct usb_device *udev, enum usb3_link_state state);
1792 int xhci_disable_usb3_lpm_timeout(struct usb_hcd *hcd,
1793                         struct usb_device *udev, enum usb3_link_state state);
1794 void xhci_test_and_clear_bit(struct xhci_hcd *xhci, __le32 __iomem **port_array,
1795                                 int port_id, u32 port_bit);
1796 int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, u16 wIndex,
1797                 char *buf, u16 wLength);
1798 int xhci_hub_status_data(struct usb_hcd *hcd, char *buf);
1799
1800 #ifdef CONFIG_PM
1801 int xhci_bus_suspend(struct usb_hcd *hcd);
1802 int xhci_bus_resume(struct usb_hcd *hcd);
1803 #else
1804 #define xhci_bus_suspend        NULL
1805 #define xhci_bus_resume         NULL
1806 #endif  /* CONFIG_PM */
1807
1808 u32 xhci_port_state_to_neutral(u32 state);
1809 int xhci_find_slot_id_by_port(struct usb_hcd *hcd, struct xhci_hcd *xhci,
1810                 u16 port);
1811 void xhci_ring_device(struct xhci_hcd *xhci, int slot_id);
1812
1813 /* xHCI contexts */
1814 struct xhci_input_control_ctx *xhci_get_input_control_ctx(struct xhci_hcd *xhci, struct xhci_container_ctx *ctx);
1815 struct xhci_slot_ctx *xhci_get_slot_ctx(struct xhci_hcd *xhci, struct xhci_container_ctx *ctx);
1816 struct xhci_ep_ctx *xhci_get_ep_ctx(struct xhci_hcd *xhci, struct xhci_container_ctx *ctx, unsigned int ep_index);
1817
1818 #endif /* __LINUX_XHCI_HCD_H */