drivers/usb/musb/Kconfig

   1 #
   2 # USB Dual Role (OTG-ready) Controller Drivers
   3 # for silicon based on Mentor Graphics INVENTRA designs
   4 #
   5
   6 # (M)HDRC = (Multipoint) Highspeed Dual-Role Controller
   7 config USB_MUSB_HDRC
   8         tristate 'Inventra Highspeed Dual Role Controller (TI, ADI, ...)'
   9         depends on USB_GADGET
  10         help
  11           Say Y here if your system has a dual role high speed USB
  12           controller based on the Mentor Graphics silicon IP.  Then
  13           configure options to match your silicon and the board
  14           it's being used with, including the USB peripheral role,
  15           or the USB host role, or both.
  16
  17           Texas Instruments families using this IP include DaVinci
  18           (35x, 644x ...), OMAP 243x, OMAP 3, and TUSB 6010.
  19
  20           Analog Devices parts using this IP include Blackfin BF54x,
  21           BF525 and BF527.
  22
  23           If you do not know what this is, please say N.
  24
  25           To compile this driver as a module, choose M here; the
  26           module will be called "musb-hdrc".
  27
  28 if USB_MUSB_HDRC
  29
  30 choice
  31         bool "MUSB Mode Selection"
  32         default USB_MUSB_DUAL_ROLE if (USB && USB_GADGET)
  33         default USB_MUSB_HOST if (USB && !USB_GADGET)
  34         default USB_MUSB_GADGET if (!USB && USB_GADGET)
  35
  36 config USB_MUSB_HOST
  37         bool "Host only mode"
  38         depends on USB
  39         help
  40           Select this when you want to use MUSB in host mode only,
  41           thereby the gadget feature will be regressed.
  42
  43 config USB_MUSB_GADGET
  44         bool "Gadget only mode"
  45         depends on USB_GADGET
  46         help
  47           Select this when you want to use MUSB in gadget mode only,
  48           thereby the host feature will be regressed.
  49
  50 config USB_MUSB_DUAL_ROLE
  51         bool "Dual Role mode"
  52         depends on (USB && USB_GADGET)
  53         help
  54           This is the default mode of working of MUSB controller where
  55           both host and gadget features are enabled.
  56
  57 endchoice
  58
  59 choice
  60         prompt "Platform Glue Layer"
  61
  62 config USB_MUSB_DAVINCI
  63         tristate "DaVinci"
  64         depends on ARCH_DAVINCI_DMx
  65         depends on BROKEN
  66
  67 config USB_MUSB_DA8XX
  68         tristate "DA8xx/OMAP-L1x"
  69         depends on ARCH_DAVINCI_DA8XX
  70         depends on BROKEN
  71
  72 config USB_MUSB_TUSB6010
  73         tristate "TUSB6010"
  74
  75 config USB_MUSB_OMAP2PLUS
  76         tristate "OMAP2430 and onwards"
  77         depends on ARCH_OMAP2PLUS
  78
  79 config USB_MUSB_AM35X
  80         tristate "AM35x"
  81         depends on ARCH_OMAP
  82
  83 config USB_MUSB_DSPS
  84         tristate "TI DSPS platforms"
  85         select USB_MUSB_AM335X_CHILD
  86         depends on OF_IRQ
  87
  88 config USB_MUSB_BLACKFIN
  89         tristate "Blackfin"
  90         depends on (BF54x && !BF544) || (BF52x && ! BF522 && !BF523)
  91
  92 config USB_MUSB_UX500
  93         tristate "U8500 and U5500"
  94
  95 endchoice
  96
  97 config USB_MUSB_AM335X_CHILD
  98         tristate
  99
 100 choice
 101         prompt 'MUSB DMA mode'
 102         default MUSB_PIO_ONLY if ARCH_MULTIPLATFORM
 103         default USB_UX500_DMA if USB_MUSB_UX500
 104         default USB_INVENTRA_DMA if USB_MUSB_OMAP2PLUS || USB_MUSB_BLACKFIN
 105         default USB_TI_CPPI_DMA if USB_MUSB_DAVINCI
 106         default USB_TUSB_OMAP_DMA if USB_MUSB_TUSB6010
 107         default MUSB_PIO_ONLY if USB_MUSB_TUSB6010 || USB_MUSB_DA8XX || USB_MUSB_AM35X \
 108                                 || USB_MUSB_DSPS
 109         help
 110           Unfortunately, only one option can be enabled here. Ideally one
 111           should be able to build all these drivers into one kernel to
 112           allow using DMA on multiplatform kernels.
 113
 114 config USB_UX500_DMA
 115         bool 'ST Ericsson U8500 and U5500'
 116         depends on USB_MUSB_UX500
 117         help
 118           Enable DMA transfers on UX500 platforms.
 119
 120 config USB_INVENTRA_DMA
 121         bool 'Inventra'
 122         depends on USB_MUSB_OMAP2PLUS || USB_MUSB_BLACKFIN
 123         help
 124           Enable DMA transfers using Mentor's engine.
 125
 126 config USB_TI_CPPI_DMA
 127         bool 'TI CPPI (Davinci)'
 128         depends on USB_MUSB_DAVINCI
 129         help
 130           Enable DMA transfers when TI CPPI DMA is available.
 131
 132 config USB_TI_CPPI41_DMA
 133         bool 'TI CPPI 4.1 (AM335x)'
 134         depends on ARCH_OMAP
 135
 136 config USB_TUSB_OMAP_DMA
 137         bool 'TUSB 6010'
 138         depends on USB_MUSB_TUSB6010
 139         depends on ARCH_OMAP
 140         help
 141           Enable DMA transfers on TUSB 6010 when OMAP DMA is available.
 142
 143 config MUSB_PIO_ONLY
 144         bool 'Disable DMA (always use PIO)'
 145         help
 146           All data is copied between memory and FIFO by the CPU.
 147           DMA controllers are ignored.
 148
 149           Do not choose this unless DMA support for your SOC or board
 150           is unavailable (or unstable).  When DMA is enabled at compile time,
 151           you can still disable it at run time using the "use_dma=n" module
 152           parameter.
 153
 154 endchoice
 155
 156 endif # USB_MUSB_HDRC