Merge remote-tracking branch 'asoc/topic/tegra' into asoc-next
[deliverable/linux.git] / drivers / usb / musb / musb_regs.h
1 /*
2 * MUSB OTG driver register defines
3 *
4 * Copyright 2005 Mentor Graphics Corporation
5 * Copyright (C) 2005-2006 by Texas Instruments
6 * Copyright (C) 2006-2007 Nokia Corporation
7 *
8 * This program is free software; you can redistribute it and/or
9 * modify it under the terms of the GNU General Public License
10 * version 2 as published by the Free Software Foundation.
11 *
12 * This program is distributed in the hope that it will be useful, but
13 * WITHOUT ANY WARRANTY; without even the implied warranty of
14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
15 * General Public License for more details.
16 *
17 * You should have received a copy of the GNU General Public License
18 * along with this program; if not, write to the Free Software
19 * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
20 * 02110-1301 USA
21 *
22 * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
23 * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
24 * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
25 * NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY DIRECT, INDIRECT,
26 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
27 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
28 * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
29 * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
30 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
31 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
32 *
33 */
34
35 #ifndef __MUSB_REGS_H__
36 #define __MUSB_REGS_H__
37
38 #define MUSB_EP0_FIFOSIZE 64 /* This is non-configurable */
39
40 /*
41 * MUSB Register bits
42 */
43
44 /* POWER */
45 #define MUSB_POWER_ISOUPDATE 0x80
46 #define MUSB_POWER_SOFTCONN 0x40
47 #define MUSB_POWER_HSENAB 0x20
48 #define MUSB_POWER_HSMODE 0x10
49 #define MUSB_POWER_RESET 0x08
50 #define MUSB_POWER_RESUME 0x04
51 #define MUSB_POWER_SUSPENDM 0x02
52 #define MUSB_POWER_ENSUSPEND 0x01
53
54 /* INTRUSB */
55 #define MUSB_INTR_SUSPEND 0x01
56 #define MUSB_INTR_RESUME 0x02
57 #define MUSB_INTR_RESET 0x04
58 #define MUSB_INTR_BABBLE 0x04
59 #define MUSB_INTR_SOF 0x08
60 #define MUSB_INTR_CONNECT 0x10
61 #define MUSB_INTR_DISCONNECT 0x20
62 #define MUSB_INTR_SESSREQ 0x40
63 #define MUSB_INTR_VBUSERROR 0x80 /* For SESSION end */
64
65 /* DEVCTL */
66 #define MUSB_DEVCTL_BDEVICE 0x80
67 #define MUSB_DEVCTL_FSDEV 0x40
68 #define MUSB_DEVCTL_LSDEV 0x20
69 #define MUSB_DEVCTL_VBUS 0x18
70 #define MUSB_DEVCTL_VBUS_SHIFT 3
71 #define MUSB_DEVCTL_HM 0x04
72 #define MUSB_DEVCTL_HR 0x02
73 #define MUSB_DEVCTL_SESSION 0x01
74
75 /* MUSB ULPI VBUSCONTROL */
76 #define MUSB_ULPI_USE_EXTVBUS 0x01
77 #define MUSB_ULPI_USE_EXTVBUSIND 0x02
78 /* ULPI_REG_CONTROL */
79 #define MUSB_ULPI_REG_REQ (1 << 0)
80 #define MUSB_ULPI_REG_CMPLT (1 << 1)
81 #define MUSB_ULPI_RDN_WR (1 << 2)
82
83 /* TESTMODE */
84 #define MUSB_TEST_FORCE_HOST 0x80
85 #define MUSB_TEST_FIFO_ACCESS 0x40
86 #define MUSB_TEST_FORCE_FS 0x20
87 #define MUSB_TEST_FORCE_HS 0x10
88 #define MUSB_TEST_PACKET 0x08
89 #define MUSB_TEST_K 0x04
90 #define MUSB_TEST_J 0x02
91 #define MUSB_TEST_SE0_NAK 0x01
92
93 /* Allocate for double-packet buffering (effectively doubles assigned _SIZE) */
94 #define MUSB_FIFOSZ_DPB 0x10
95 /* Allocation size (8, 16, 32, ... 4096) */
96 #define MUSB_FIFOSZ_SIZE 0x0f
97
98 /* CSR0 */
99 #define MUSB_CSR0_FLUSHFIFO 0x0100
100 #define MUSB_CSR0_TXPKTRDY 0x0002
101 #define MUSB_CSR0_RXPKTRDY 0x0001
102
103 /* CSR0 in Peripheral mode */
104 #define MUSB_CSR0_P_SVDSETUPEND 0x0080
105 #define MUSB_CSR0_P_SVDRXPKTRDY 0x0040
106 #define MUSB_CSR0_P_SENDSTALL 0x0020
107 #define MUSB_CSR0_P_SETUPEND 0x0010
108 #define MUSB_CSR0_P_DATAEND 0x0008
109 #define MUSB_CSR0_P_SENTSTALL 0x0004
110
111 /* CSR0 in Host mode */
112 #define MUSB_CSR0_H_DIS_PING 0x0800
113 #define MUSB_CSR0_H_WR_DATATOGGLE 0x0400 /* Set to allow setting: */
114 #define MUSB_CSR0_H_DATATOGGLE 0x0200 /* Data toggle control */
115 #define MUSB_CSR0_H_NAKTIMEOUT 0x0080
116 #define MUSB_CSR0_H_STATUSPKT 0x0040
117 #define MUSB_CSR0_H_REQPKT 0x0020
118 #define MUSB_CSR0_H_ERROR 0x0010
119 #define MUSB_CSR0_H_SETUPPKT 0x0008
120 #define MUSB_CSR0_H_RXSTALL 0x0004
121
122 /* CSR0 bits to avoid zeroing (write zero clears, write 1 ignored) */
123 #define MUSB_CSR0_P_WZC_BITS \
124 (MUSB_CSR0_P_SENTSTALL)
125 #define MUSB_CSR0_H_WZC_BITS \
126 (MUSB_CSR0_H_NAKTIMEOUT | MUSB_CSR0_H_RXSTALL \
127 | MUSB_CSR0_RXPKTRDY)
128
129 /* TxType/RxType */
130 #define MUSB_TYPE_SPEED 0xc0
131 #define MUSB_TYPE_SPEED_SHIFT 6
132 #define MUSB_TYPE_PROTO 0x30 /* Implicitly zero for ep0 */
133 #define MUSB_TYPE_PROTO_SHIFT 4
134 #define MUSB_TYPE_REMOTE_END 0xf /* Implicitly zero for ep0 */
135
136 /* CONFIGDATA */
137 #define MUSB_CONFIGDATA_MPRXE 0x80 /* Auto bulk pkt combining */
138 #define MUSB_CONFIGDATA_MPTXE 0x40 /* Auto bulk pkt splitting */
139 #define MUSB_CONFIGDATA_BIGENDIAN 0x20
140 #define MUSB_CONFIGDATA_HBRXE 0x10 /* HB-ISO for RX */
141 #define MUSB_CONFIGDATA_HBTXE 0x08 /* HB-ISO for TX */
142 #define MUSB_CONFIGDATA_DYNFIFO 0x04 /* Dynamic FIFO sizing */
143 #define MUSB_CONFIGDATA_SOFTCONE 0x02 /* SoftConnect */
144 #define MUSB_CONFIGDATA_UTMIDW 0x01 /* Data width 0/1 => 8/16bits */
145
146 /* TXCSR in Peripheral and Host mode */
147 #define MUSB_TXCSR_AUTOSET 0x8000
148 #define MUSB_TXCSR_DMAENAB 0x1000
149 #define MUSB_TXCSR_FRCDATATOG 0x0800
150 #define MUSB_TXCSR_DMAMODE 0x0400
151 #define MUSB_TXCSR_CLRDATATOG 0x0040
152 #define MUSB_TXCSR_FLUSHFIFO 0x0008
153 #define MUSB_TXCSR_FIFONOTEMPTY 0x0002
154 #define MUSB_TXCSR_TXPKTRDY 0x0001
155
156 /* TXCSR in Peripheral mode */
157 #define MUSB_TXCSR_P_ISO 0x4000
158 #define MUSB_TXCSR_P_INCOMPTX 0x0080
159 #define MUSB_TXCSR_P_SENTSTALL 0x0020
160 #define MUSB_TXCSR_P_SENDSTALL 0x0010
161 #define MUSB_TXCSR_P_UNDERRUN 0x0004
162
163 /* TXCSR in Host mode */
164 #define MUSB_TXCSR_H_WR_DATATOGGLE 0x0200
165 #define MUSB_TXCSR_H_DATATOGGLE 0x0100
166 #define MUSB_TXCSR_H_NAKTIMEOUT 0x0080
167 #define MUSB_TXCSR_H_RXSTALL 0x0020
168 #define MUSB_TXCSR_H_ERROR 0x0004
169
170 /* TXCSR bits to avoid zeroing (write zero clears, write 1 ignored) */
171 #define MUSB_TXCSR_P_WZC_BITS \
172 (MUSB_TXCSR_P_INCOMPTX | MUSB_TXCSR_P_SENTSTALL \
173 | MUSB_TXCSR_P_UNDERRUN | MUSB_TXCSR_FIFONOTEMPTY)
174 #define MUSB_TXCSR_H_WZC_BITS \
175 (MUSB_TXCSR_H_NAKTIMEOUT | MUSB_TXCSR_H_RXSTALL \
176 | MUSB_TXCSR_H_ERROR | MUSB_TXCSR_FIFONOTEMPTY)
177
178 /* RXCSR in Peripheral and Host mode */
179 #define MUSB_RXCSR_AUTOCLEAR 0x8000
180 #define MUSB_RXCSR_DMAENAB 0x2000
181 #define MUSB_RXCSR_DISNYET 0x1000
182 #define MUSB_RXCSR_PID_ERR 0x1000
183 #define MUSB_RXCSR_DMAMODE 0x0800
184 #define MUSB_RXCSR_INCOMPRX 0x0100
185 #define MUSB_RXCSR_CLRDATATOG 0x0080
186 #define MUSB_RXCSR_FLUSHFIFO 0x0010
187 #define MUSB_RXCSR_DATAERROR 0x0008
188 #define MUSB_RXCSR_FIFOFULL 0x0002
189 #define MUSB_RXCSR_RXPKTRDY 0x0001
190
191 /* RXCSR in Peripheral mode */
192 #define MUSB_RXCSR_P_ISO 0x4000
193 #define MUSB_RXCSR_P_SENTSTALL 0x0040
194 #define MUSB_RXCSR_P_SENDSTALL 0x0020
195 #define MUSB_RXCSR_P_OVERRUN 0x0004
196
197 /* RXCSR in Host mode */
198 #define MUSB_RXCSR_H_AUTOREQ 0x4000
199 #define MUSB_RXCSR_H_WR_DATATOGGLE 0x0400
200 #define MUSB_RXCSR_H_DATATOGGLE 0x0200
201 #define MUSB_RXCSR_H_RXSTALL 0x0040
202 #define MUSB_RXCSR_H_REQPKT 0x0020
203 #define MUSB_RXCSR_H_ERROR 0x0004
204
205 /* RXCSR bits to avoid zeroing (write zero clears, write 1 ignored) */
206 #define MUSB_RXCSR_P_WZC_BITS \
207 (MUSB_RXCSR_P_SENTSTALL | MUSB_RXCSR_P_OVERRUN \
208 | MUSB_RXCSR_RXPKTRDY)
209 #define MUSB_RXCSR_H_WZC_BITS \
210 (MUSB_RXCSR_H_RXSTALL | MUSB_RXCSR_H_ERROR \
211 | MUSB_RXCSR_DATAERROR | MUSB_RXCSR_RXPKTRDY)
212
213 /* HUBADDR */
214 #define MUSB_HUBADDR_MULTI_TT 0x80
215
216
217 #ifndef CONFIG_BLACKFIN
218
219 /*
220 * Common USB registers
221 */
222
223 #define MUSB_FADDR 0x00 /* 8-bit */
224 #define MUSB_POWER 0x01 /* 8-bit */
225
226 #define MUSB_INTRTX 0x02 /* 16-bit */
227 #define MUSB_INTRRX 0x04
228 #define MUSB_INTRTXE 0x06
229 #define MUSB_INTRRXE 0x08
230 #define MUSB_INTRUSB 0x0A /* 8 bit */
231 #define MUSB_INTRUSBE 0x0B /* 8 bit */
232 #define MUSB_FRAME 0x0C
233 #define MUSB_INDEX 0x0E /* 8 bit */
234 #define MUSB_TESTMODE 0x0F /* 8 bit */
235
236 /* Get offset for a given FIFO from musb->mregs */
237 #if defined(CONFIG_USB_MUSB_TUSB6010) || \
238 defined(CONFIG_USB_MUSB_TUSB6010_MODULE)
239 #define MUSB_FIFO_OFFSET(epnum) (0x200 + ((epnum) * 0x20))
240 #else
241 #define MUSB_FIFO_OFFSET(epnum) (0x20 + ((epnum) * 4))
242 #endif
243
244 /*
245 * Additional Control Registers
246 */
247
248 #define MUSB_DEVCTL 0x60 /* 8 bit */
249
250 /* These are always controlled through the INDEX register */
251 #define MUSB_TXFIFOSZ 0x62 /* 8-bit (see masks) */
252 #define MUSB_RXFIFOSZ 0x63 /* 8-bit (see masks) */
253 #define MUSB_TXFIFOADD 0x64 /* 16-bit offset shifted right 3 */
254 #define MUSB_RXFIFOADD 0x66 /* 16-bit offset shifted right 3 */
255
256 /* REVISIT: vctrl/vstatus: optional vendor utmi+phy register at 0x68 */
257 #define MUSB_HWVERS 0x6C /* 8 bit */
258 #define MUSB_ULPI_BUSCONTROL 0x70 /* 8 bit */
259 #define MUSB_ULPI_INT_MASK 0x72 /* 8 bit */
260 #define MUSB_ULPI_INT_SRC 0x73 /* 8 bit */
261 #define MUSB_ULPI_REG_DATA 0x74 /* 8 bit */
262 #define MUSB_ULPI_REG_ADDR 0x75 /* 8 bit */
263 #define MUSB_ULPI_REG_CONTROL 0x76 /* 8 bit */
264 #define MUSB_ULPI_RAW_DATA 0x77 /* 8 bit */
265
266 #define MUSB_EPINFO 0x78 /* 8 bit */
267 #define MUSB_RAMINFO 0x79 /* 8 bit */
268 #define MUSB_LINKINFO 0x7a /* 8 bit */
269 #define MUSB_VPLEN 0x7b /* 8 bit */
270 #define MUSB_HS_EOF1 0x7c /* 8 bit */
271 #define MUSB_FS_EOF1 0x7d /* 8 bit */
272 #define MUSB_LS_EOF1 0x7e /* 8 bit */
273
274 /* Offsets to endpoint registers */
275 #define MUSB_TXMAXP 0x00
276 #define MUSB_TXCSR 0x02
277 #define MUSB_CSR0 MUSB_TXCSR /* Re-used for EP0 */
278 #define MUSB_RXMAXP 0x04
279 #define MUSB_RXCSR 0x06
280 #define MUSB_RXCOUNT 0x08
281 #define MUSB_COUNT0 MUSB_RXCOUNT /* Re-used for EP0 */
282 #define MUSB_TXTYPE 0x0A
283 #define MUSB_TYPE0 MUSB_TXTYPE /* Re-used for EP0 */
284 #define MUSB_TXINTERVAL 0x0B
285 #define MUSB_NAKLIMIT0 MUSB_TXINTERVAL /* Re-used for EP0 */
286 #define MUSB_RXTYPE 0x0C
287 #define MUSB_RXINTERVAL 0x0D
288 #define MUSB_FIFOSIZE 0x0F
289 #define MUSB_CONFIGDATA MUSB_FIFOSIZE /* Re-used for EP0 */
290
291 /* Offsets to endpoint registers in indexed model (using INDEX register) */
292 #define MUSB_INDEXED_OFFSET(_epnum, _offset) \
293 (0x10 + (_offset))
294
295 /* Offsets to endpoint registers in flat models */
296 #define MUSB_FLAT_OFFSET(_epnum, _offset) \
297 (0x100 + (0x10*(_epnum)) + (_offset))
298
299 #if defined(CONFIG_USB_MUSB_TUSB6010) || \
300 defined(CONFIG_USB_MUSB_TUSB6010_MODULE)
301 /* TUSB6010 EP0 configuration register is special */
302 #define MUSB_TUSB_OFFSET(_epnum, _offset) \
303 (0x10 + _offset)
304 #include "tusb6010.h" /* Needed "only" for TUSB_EP0_CONF */
305 #endif
306
307 #define MUSB_TXCSR_MODE 0x2000
308
309 /* "bus control"/target registers, for host side multipoint (external hubs) */
310 #define MUSB_TXFUNCADDR 0x00
311 #define MUSB_TXHUBADDR 0x02
312 #define MUSB_TXHUBPORT 0x03
313
314 #define MUSB_RXFUNCADDR 0x04
315 #define MUSB_RXHUBADDR 0x06
316 #define MUSB_RXHUBPORT 0x07
317
318 #define MUSB_BUSCTL_OFFSET(_epnum, _offset) \
319 (0x80 + (8*(_epnum)) + (_offset))
320
321 static inline void musb_write_txfifosz(void __iomem *mbase, u8 c_size)
322 {
323 musb_writeb(mbase, MUSB_TXFIFOSZ, c_size);
324 }
325
326 static inline void musb_write_txfifoadd(void __iomem *mbase, u16 c_off)
327 {
328 musb_writew(mbase, MUSB_TXFIFOADD, c_off);
329 }
330
331 static inline void musb_write_rxfifosz(void __iomem *mbase, u8 c_size)
332 {
333 musb_writeb(mbase, MUSB_RXFIFOSZ, c_size);
334 }
335
336 static inline void musb_write_rxfifoadd(void __iomem *mbase, u16 c_off)
337 {
338 musb_writew(mbase, MUSB_RXFIFOADD, c_off);
339 }
340
341 static inline void musb_write_ulpi_buscontrol(void __iomem *mbase, u8 val)
342 {
343 musb_writeb(mbase, MUSB_ULPI_BUSCONTROL, val);
344 }
345
346 static inline u8 musb_read_txfifosz(void __iomem *mbase)
347 {
348 return musb_readb(mbase, MUSB_TXFIFOSZ);
349 }
350
351 static inline u16 musb_read_txfifoadd(void __iomem *mbase)
352 {
353 return musb_readw(mbase, MUSB_TXFIFOADD);
354 }
355
356 static inline u8 musb_read_rxfifosz(void __iomem *mbase)
357 {
358 return musb_readb(mbase, MUSB_RXFIFOSZ);
359 }
360
361 static inline u16 musb_read_rxfifoadd(void __iomem *mbase)
362 {
363 return musb_readw(mbase, MUSB_RXFIFOADD);
364 }
365
366 static inline u8 musb_read_ulpi_buscontrol(void __iomem *mbase)
367 {
368 return musb_readb(mbase, MUSB_ULPI_BUSCONTROL);
369 }
370
371 static inline u8 musb_read_configdata(void __iomem *mbase)
372 {
373 musb_writeb(mbase, MUSB_INDEX, 0);
374 return musb_readb(mbase, 0x10 + MUSB_CONFIGDATA);
375 }
376
377 static inline u16 musb_read_hwvers(void __iomem *mbase)
378 {
379 return musb_readw(mbase, MUSB_HWVERS);
380 }
381
382 static inline void __iomem *musb_read_target_reg_base(u8 i, void __iomem *mbase)
383 {
384 return (MUSB_BUSCTL_OFFSET(i, 0) + mbase);
385 }
386
387 static inline void musb_write_rxfunaddr(void __iomem *ep_target_regs,
388 u8 qh_addr_reg)
389 {
390 musb_writeb(ep_target_regs, MUSB_RXFUNCADDR, qh_addr_reg);
391 }
392
393 static inline void musb_write_rxhubaddr(void __iomem *ep_target_regs,
394 u8 qh_h_addr_reg)
395 {
396 musb_writeb(ep_target_regs, MUSB_RXHUBADDR, qh_h_addr_reg);
397 }
398
399 static inline void musb_write_rxhubport(void __iomem *ep_target_regs,
400 u8 qh_h_port_reg)
401 {
402 musb_writeb(ep_target_regs, MUSB_RXHUBPORT, qh_h_port_reg);
403 }
404
405 static inline void musb_write_txfunaddr(void __iomem *mbase, u8 epnum,
406 u8 qh_addr_reg)
407 {
408 musb_writeb(mbase, MUSB_BUSCTL_OFFSET(epnum, MUSB_TXFUNCADDR),
409 qh_addr_reg);
410 }
411
412 static inline void musb_write_txhubaddr(void __iomem *mbase, u8 epnum,
413 u8 qh_addr_reg)
414 {
415 musb_writeb(mbase, MUSB_BUSCTL_OFFSET(epnum, MUSB_TXHUBADDR),
416 qh_addr_reg);
417 }
418
419 static inline void musb_write_txhubport(void __iomem *mbase, u8 epnum,
420 u8 qh_h_port_reg)
421 {
422 musb_writeb(mbase, MUSB_BUSCTL_OFFSET(epnum, MUSB_TXHUBPORT),
423 qh_h_port_reg);
424 }
425
426 static inline u8 musb_read_rxfunaddr(void __iomem *mbase, u8 epnum)
427 {
428 return musb_readb(mbase, MUSB_BUSCTL_OFFSET(epnum, MUSB_RXFUNCADDR));
429 }
430
431 static inline u8 musb_read_rxhubaddr(void __iomem *mbase, u8 epnum)
432 {
433 return musb_readb(mbase, MUSB_BUSCTL_OFFSET(epnum, MUSB_RXHUBADDR));
434 }
435
436 static inline u8 musb_read_rxhubport(void __iomem *mbase, u8 epnum)
437 {
438 return musb_readb(mbase, MUSB_BUSCTL_OFFSET(epnum, MUSB_RXHUBPORT));
439 }
440
441 static inline u8 musb_read_txfunaddr(void __iomem *mbase, u8 epnum)
442 {
443 return musb_readb(mbase, MUSB_BUSCTL_OFFSET(epnum, MUSB_TXFUNCADDR));
444 }
445
446 static inline u8 musb_read_txhubaddr(void __iomem *mbase, u8 epnum)
447 {
448 return musb_readb(mbase, MUSB_BUSCTL_OFFSET(epnum, MUSB_TXHUBADDR));
449 }
450
451 static inline u8 musb_read_txhubport(void __iomem *mbase, u8 epnum)
452 {
453 return musb_readb(mbase, MUSB_BUSCTL_OFFSET(epnum, MUSB_TXHUBPORT));
454 }
455
456 #else /* CONFIG_BLACKFIN */
457
458 #define USB_BASE USB_FADDR
459 #define USB_OFFSET(reg) (reg - USB_BASE)
460
461 /*
462 * Common USB registers
463 */
464 #define MUSB_FADDR USB_OFFSET(USB_FADDR) /* 8-bit */
465 #define MUSB_POWER USB_OFFSET(USB_POWER) /* 8-bit */
466 #define MUSB_INTRTX USB_OFFSET(USB_INTRTX) /* 16-bit */
467 #define MUSB_INTRRX USB_OFFSET(USB_INTRRX)
468 #define MUSB_INTRTXE USB_OFFSET(USB_INTRTXE)
469 #define MUSB_INTRRXE USB_OFFSET(USB_INTRRXE)
470 #define MUSB_INTRUSB USB_OFFSET(USB_INTRUSB) /* 8 bit */
471 #define MUSB_INTRUSBE USB_OFFSET(USB_INTRUSBE)/* 8 bit */
472 #define MUSB_FRAME USB_OFFSET(USB_FRAME)
473 #define MUSB_INDEX USB_OFFSET(USB_INDEX) /* 8 bit */
474 #define MUSB_TESTMODE USB_OFFSET(USB_TESTMODE)/* 8 bit */
475
476 /* Get offset for a given FIFO from musb->mregs */
477 #define MUSB_FIFO_OFFSET(epnum) \
478 (USB_OFFSET(USB_EP0_FIFO) + ((epnum) * 8))
479
480 /*
481 * Additional Control Registers
482 */
483
484 #define MUSB_DEVCTL USB_OFFSET(USB_OTG_DEV_CTL) /* 8 bit */
485
486 #define MUSB_LINKINFO USB_OFFSET(USB_LINKINFO)/* 8 bit */
487 #define MUSB_VPLEN USB_OFFSET(USB_VPLEN) /* 8 bit */
488 #define MUSB_HS_EOF1 USB_OFFSET(USB_HS_EOF1) /* 8 bit */
489 #define MUSB_FS_EOF1 USB_OFFSET(USB_FS_EOF1) /* 8 bit */
490 #define MUSB_LS_EOF1 USB_OFFSET(USB_LS_EOF1) /* 8 bit */
491
492 /* Offsets to endpoint registers */
493 #define MUSB_TXMAXP 0x00
494 #define MUSB_TXCSR 0x04
495 #define MUSB_CSR0 MUSB_TXCSR /* Re-used for EP0 */
496 #define MUSB_RXMAXP 0x08
497 #define MUSB_RXCSR 0x0C
498 #define MUSB_RXCOUNT 0x10
499 #define MUSB_COUNT0 MUSB_RXCOUNT /* Re-used for EP0 */
500 #define MUSB_TXTYPE 0x14
501 #define MUSB_TYPE0 MUSB_TXTYPE /* Re-used for EP0 */
502 #define MUSB_TXINTERVAL 0x18
503 #define MUSB_NAKLIMIT0 MUSB_TXINTERVAL /* Re-used for EP0 */
504 #define MUSB_RXTYPE 0x1C
505 #define MUSB_RXINTERVAL 0x20
506 #define MUSB_TXCOUNT 0x28
507
508 /* Offsets to endpoint registers in indexed model (using INDEX register) */
509 #define MUSB_INDEXED_OFFSET(_epnum, _offset) \
510 (0x40 + (_offset))
511
512 /* Offsets to endpoint registers in flat models */
513 #define MUSB_FLAT_OFFSET(_epnum, _offset) \
514 (USB_OFFSET(USB_EP_NI0_TXMAXP) + (0x40 * (_epnum)) + (_offset))
515
516 /* Not implemented - HW has separate Tx/Rx FIFO */
517 #define MUSB_TXCSR_MODE 0x0000
518
519 static inline void musb_write_txfifosz(void __iomem *mbase, u8 c_size)
520 {
521 }
522
523 static inline void musb_write_txfifoadd(void __iomem *mbase, u16 c_off)
524 {
525 }
526
527 static inline void musb_write_rxfifosz(void __iomem *mbase, u8 c_size)
528 {
529 }
530
531 static inline void musb_write_rxfifoadd(void __iomem *mbase, u16 c_off)
532 {
533 }
534
535 static inline void musb_write_ulpi_buscontrol(void __iomem *mbase, u8 val)
536 {
537 }
538
539 static inline u8 musb_read_txfifosz(void __iomem *mbase)
540 {
541 return 0;
542 }
543
544 static inline u16 musb_read_txfifoadd(void __iomem *mbase)
545 {
546 return 0;
547 }
548
549 static inline u8 musb_read_rxfifosz(void __iomem *mbase)
550 {
551 return 0;
552 }
553
554 static inline u16 musb_read_rxfifoadd(void __iomem *mbase)
555 {
556 return 0;
557 }
558
559 static inline u8 musb_read_ulpi_buscontrol(void __iomem *mbase)
560 {
561 return 0;
562 }
563
564 static inline u8 musb_read_configdata(void __iomem *mbase)
565 {
566 return 0;
567 }
568
569 static inline u16 musb_read_hwvers(void __iomem *mbase)
570 {
571 /*
572 * This register is invisible on Blackfin, actually the MUSB
573 * RTL version of Blackfin is 1.9, so just harcode its value.
574 */
575 return MUSB_HWVERS_1900;
576 }
577
578 static inline void __iomem *musb_read_target_reg_base(u8 i, void __iomem *mbase)
579 {
580 return NULL;
581 }
582
583 static inline void musb_write_rxfunaddr(void __iomem *ep_target_regs,
584 u8 qh_addr_req)
585 {
586 }
587
588 static inline void musb_write_rxhubaddr(void __iomem *ep_target_regs,
589 u8 qh_h_addr_reg)
590 {
591 }
592
593 static inline void musb_write_rxhubport(void __iomem *ep_target_regs,
594 u8 qh_h_port_reg)
595 {
596 }
597
598 static inline void musb_write_txfunaddr(void __iomem *mbase, u8 epnum,
599 u8 qh_addr_reg)
600 {
601 }
602
603 static inline void musb_write_txhubaddr(void __iomem *mbase, u8 epnum,
604 u8 qh_addr_reg)
605 {
606 }
607
608 static inline void musb_write_txhubport(void __iomem *mbase, u8 epnum,
609 u8 qh_h_port_reg)
610 {
611 }
612
613 static inline u8 musb_read_rxfunaddr(void __iomem *mbase, u8 epnum)
614 {
615 return 0;
616 }
617
618 static inline u8 musb_read_rxhubaddr(void __iomem *mbase, u8 epnum)
619 {
620 return 0;
621 }
622
623 static inline u8 musb_read_rxhubport(void __iomem *mbase, u8 epnum)
624 {
625 return 0;
626 }
627
628 static inline u8 musb_read_txfunaddr(void __iomem *mbase, u8 epnum)
629 {
630 return 0;
631 }
632
633 static inline u8 musb_read_txhubaddr(void __iomem *mbase, u8 epnum)
634 {
635 return 0;
636 }
637
638 static inline u8 musb_read_txhubport(void __iomem *mbase, u8 epnum)
639 {
640 return 0;
641 }
642
643 #endif /* CONFIG_BLACKFIN */
644
645 #endif /* __MUSB_REGS_H__ */
This page took 0.046085 seconds and 5 git commands to generate.