drivers/usb/serial/Kconfig

   1 #
   2 # USB Serial device configuration
   3 #
   4
   5 menuconfig USB_SERIAL
   6         tristate "USB Serial Converter support"
   7         depends on USB
   8         ---help---
   9           Say Y here if you have a USB device that provides normal serial
  10           ports, or acts like a serial device, and you want to connect it to
  11           your USB bus.
  12
  13           Please read <file:Documentation/usb/usb-serial.txt> for more
  14           information on the specifics of the different devices that are
  15           supported, and on how to use them.
  16
  17           To compile this driver as a module, choose M here: the
  18           module will be called usbserial.
  19
  20 if USB_SERIAL
  21
  22 config USB_SERIAL_CONSOLE
  23         bool "USB Serial Console device support"
  24         depends on USB_SERIAL=y
  25         ---help---
  26           If you say Y here, it will be possible to use a USB to serial
  27           converter port as the system console (the system console is the
  28           device which receives all kernel messages and warnings and which
  29           allows logins in single user mode). This could be useful if some
  30           terminal or printer is connected to that serial port.
  31
  32           Even if you say Y here, the currently visible virtual console
  33           (/dev/tty0) will still be used as the system console by default, but
  34           you can alter that using a kernel command line option such as
  35           "console=ttyUSB0". (Try "man bootparam" or see the documentation of
  36           your boot loader (lilo or loadlin) about how to pass options to the
  37           kernel at boot time.)
  38
  39           If you don't have a VGA card installed and you say Y here, the
  40           kernel will automatically use the first USB to serial converter
  41           port, /dev/ttyUSB0, as system console.
  42
  43           If unsure, say N.
  44
  45 config USB_EZUSB
  46         bool "Functions for loading firmware on EZUSB chips"
  47         help
  48             Say Y here if you need EZUSB device support.
  49
  50 config USB_SERIAL_GENERIC
  51         bool "USB Generic Serial Driver"
  52         help
  53           Say Y here if you want to use the generic USB serial driver.  Please
  54           read <file:Documentation/usb/usb-serial.txt> for more information on
  55           using this driver.  It is recommended that the "USB Serial converter
  56           support" be compiled as a module for this driver to be used
  57           properly.
  58
  59 config USB_SERIAL_AIRCABLE
  60         tristate "USB AIRcable Bluetooth Dongle Driver"
  61         help
  62             Say Y here if you want to use USB AIRcable Bluetooth Dongle.
  63
  64             To compile this driver as a module, choose M here: the module
  65             will be called aircable.
  66
  67 config USB_SERIAL_ARK3116
  68         tristate "USB ARK Micro 3116 USB Serial Driver"
  69         help
  70           Say Y here if you want to use a ARK Micro 3116 USB to Serial
  71           device.
  72
  73           To compile this driver as a module, choose M here: the
  74           module will be called ark3116
  75
  76 config USB_SERIAL_BELKIN
  77         tristate "USB Belkin and Peracom Single Port Serial Driver"
  78         help
  79           Say Y here if you want to use a Belkin USB Serial single port
  80           adaptor (F5U103 is one of the model numbers) or the Peracom single
  81           port USB to serial adapter.
  82
  83           To compile this driver as a module, choose M here: the
  84           module will be called belkin_sa.
  85
  86 config USB_SERIAL_CH341
  87         tristate "USB Winchiphead CH341 Single Port Serial Driver"
  88         help
  89           Say Y here if you want to use a Winchiphead CH341 single port
  90           USB to serial adapter.
  91
  92           To compile this driver as a module, choose M here: the
  93           module will be called ch341.
  94
  95 config USB_SERIAL_WHITEHEAT
  96         tristate "USB ConnectTech WhiteHEAT Serial Driver"
  97         select USB_EZUSB
  98         help
  99           Say Y here if you want to use a ConnectTech WhiteHEAT 4 port
 100           USB to serial converter device.
 101
 102           To compile this driver as a module, choose M here: the
 103           module will be called whiteheat.
 104
 105 config USB_SERIAL_DIGI_ACCELEPORT
 106         tristate "USB Digi International AccelePort USB Serial Driver"
 107         ---help---
 108           Say Y here if you want to use Digi AccelePort USB 2 or 4 devices,
 109           2 port (plus parallel port) and 4 port USB serial converters.  The
 110           parallel port on the USB 2 appears as a third serial port on Linux.
 111           The Digi Acceleport USB 8 is not yet supported by this driver.
 112
 113           This driver works under SMP with the usb-uhci driver.  It does not
 114           work under SMP with the uhci driver.
 115
 116           To compile this driver as a module, choose M here: the
 117           module will be called digi_acceleport.
 118
 119 config USB_SERIAL_CP210X
 120         tristate "USB CP210x family of UART Bridge Controllers"
 121         help
 122           Say Y here if you want to use a CP2101/CP2102/CP2103 based USB
 123           to RS232 converters.
 124
 125           To compile this driver as a module, choose M here: the
 126           module will be called cp210x.
 127
 128 config USB_SERIAL_CYPRESS_M8
 129         tristate "USB Cypress M8 USB Serial Driver"
 130         help
 131           Say Y here if you want to use a device that contains the Cypress
 132           USB to Serial microcontroller, such as the DeLorme Earthmate GPS.
 133
 134                 Attempted SMP support... send bug reports!
 135
 136           Supported microcontrollers in the CY4601 family are:
 137                 CY7C63741 CY7C63742 CY7C63743 CY7C64013
 138
 139           To compile this driver as a module, choose M here: the
 140           module will be called cypress_m8.
 141
 142 config USB_SERIAL_EMPEG
 143         tristate "USB Empeg empeg-car Mark I/II Driver"
 144         help
 145           Say Y here if you want to connect to your Empeg empeg-car Mark I/II
 146           mp3 player via USB.  The driver uses a single ttyUSB{0,1,2,...}
 147           device node.  See <file:Documentation/usb/usb-serial.txt> for more
 148           tidbits of information.
 149
 150           To compile this driver as a module, choose M here: the
 151           module will be called empeg.
 152
 153 config USB_SERIAL_FTDI_SIO
 154         tristate "USB FTDI Single Port Serial Driver"
 155         ---help---
 156           Say Y here if you want to use a FTDI SIO single port USB to serial
 157           converter device. The implementation I have is called the USC-1000.
 158           This driver has also be tested with the 245 and 232 devices.
 159
 160           See <http://ftdi-usb-sio.sourceforge.net/> for more
 161           information on this driver and the device.
 162
 163           To compile this driver as a module, choose M here: the
 164           module will be called ftdi_sio.
 165
 166 config USB_SERIAL_FUNSOFT
 167         tristate "USB Fundamental Software Dongle Driver"
 168         ---help---
 169           Say Y here if you want to use the Fundamental Software dongle.
 170
 171           To compile this driver as a module, choose M here: the
 172           module will be called funsoft.
 173
 174 config USB_SERIAL_VISOR
 175         tristate "USB Handspring Visor / Palm m50x / Sony Clie Driver"
 176         help
 177           Say Y here if you want to connect to your HandSpring Visor, Palm
 178           m500 or m505 through its USB docking station. See
 179           <http://usbvisor.sourceforge.net/index.php3> for more information on using this
 180           driver.
 181
 182           To compile this driver as a module, choose M here: the
 183           module will be called visor.
 184
 185 config USB_SERIAL_IPAQ
 186         tristate "USB PocketPC PDA Driver"
 187         help
 188           Say Y here if you want to connect to your Compaq iPAQ, HP Jornada
 189           or any other PDA running Windows CE 3.0 or PocketPC 2002
 190           using a USB cradle/cable. For information on using the driver,
 191           read <file:Documentation/usb/usb-serial.txt>.
 192
 193           To compile this driver as a module, choose M here: the
 194           module will be called ipaq.
 195
 196 config USB_SERIAL_IR
 197         tristate "USB IR Dongle Serial Driver"
 198         help
 199           Say Y here if you want to enable simple serial support for USB IrDA
 200           devices.  This is useful if you do not want to use the full IrDA
 201           stack.
 202
 203           To compile this driver as a module, choose M here: the
 204           module will be called ir-usb.
 205
 206 config USB_SERIAL_EDGEPORT
 207         tristate "USB Inside Out Edgeport Serial Driver"
 208         ---help---
 209           Say Y here if you want to use any of the following devices from
 210           Inside Out Networks (Digi):
 211           Edgeport/4
 212           Rapidport/4
 213           Edgeport/4t
 214           Edgeport/2
 215           Edgeport/4i
 216           Edgeport/2i
 217           Edgeport/421
 218           Edgeport/21
 219           Edgeport/8
 220           Edgeport/8 Dual
 221           Edgeport/2D8
 222           Edgeport/4D8
 223           Edgeport/8i
 224           Edgeport/2 DIN
 225           Edgeport/4 DIN
 226           Edgeport/16 Dual
 227
 228           To compile this driver as a module, choose M here: the
 229           module will be called io_edgeport.
 230
 231 config USB_SERIAL_EDGEPORT_TI
 232         tristate "USB Inside Out Edgeport Serial Driver (TI devices)"
 233         help
 234           Say Y here if you want to use any of the devices from Inside Out
 235           Networks (Digi) that are not supported by the io_edgeport driver.
 236           This includes the Edgeport/1 device.
 237
 238           To compile this driver as a module, choose M here: the
 239           module will be called io_ti.
 240
 241 config USB_SERIAL_GARMIN
 242        tristate "USB Garmin GPS driver"
 243        help
 244          Say Y here if you want to connect to your Garmin GPS.
 245          Should work with most Garmin GPS devices which have a native USB port.
 246
 247          See <http://sourceforge.net/projects/garmin-gps> for the latest
 248          version of the driver.
 249
 250          To compile this driver as a module, choose M here: the
 251          module will be called garmin_gps.
 252
 253 config USB_SERIAL_IPW
 254         tristate "USB IPWireless (3G UMTS TDD) Driver"
 255         help
 256           Say Y here if you want to use a IPWireless USB modem such as
 257           the ones supplied by Axity3G/Sentech South Africa.
 258
 259           To compile this driver as a module, choose M here: the
 260           module will be called ipw.
 261
 262 config USB_SERIAL_IUU
 263         tristate "USB Infinity USB Unlimited Phoenix Driver"
 264         help
 265           Say Y here if you want to use a IUU in phoenix mode and get
 266           an extra ttyUSBx device. More information available on
 267           http://eczema.ecze.com/iuu_phoenix.html
 268
 269           To compile this driver as a module, choose M here: the
 270           module will be called iuu_phoenix.o
 271
 272 config USB_SERIAL_KEYSPAN_PDA
 273         tristate "USB Keyspan PDA Single Port Serial Driver"
 274         select USB_EZUSB
 275         help
 276           Say Y here if you want to use a Keyspan PDA single port USB to
 277           serial converter device.  This driver makes use of firmware
 278           developed from scratch by Brian Warner.
 279
 280           To compile this driver as a module, choose M here: the
 281           module will be called keyspan_pda.
 282
 283 config USB_SERIAL_KEYSPAN
 284         tristate "USB Keyspan USA-xxx Serial Driver"
 285         select USB_EZUSB
 286         ---help---
 287           Say Y here if you want to use Keyspan USB to serial converter
 288           devices.  This driver makes use of Keyspan's official firmware
 289           and was developed with their support.  You must also include
 290           firmware to support your particular device(s).
 291
 292           See <http://blemings.org/hugh/keyspan.html> for more information.
 293
 294           To compile this driver as a module, choose M here: the
 295           module will be called keyspan.
 296
 297 config USB_SERIAL_KEYSPAN_MPR
 298         bool "USB Keyspan MPR Firmware"
 299         depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
 300         help
 301           Say Y here to include firmware for the Keyspan MPR converter.
 302
 303 config USB_SERIAL_KEYSPAN_USA28
 304         bool "USB Keyspan USA-28 Firmware"
 305         depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
 306         help
 307           Say Y here to include firmware for the USA-28 converter.
 308
 309 config USB_SERIAL_KEYSPAN_USA28X
 310         bool "USB Keyspan USA-28X Firmware"
 311         depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
 312         help
 313           Say Y here to include firmware for the USA-28X converter.
 314           Be sure you have a USA-28X, there are also 28XA and 28XB
 315           models, the label underneath has the actual part number.
 316
 317 config USB_SERIAL_KEYSPAN_USA28XA
 318         bool "USB Keyspan USA-28XA Firmware"
 319         depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
 320         help
 321           Say Y here to include firmware for the USA-28XA converter.
 322           Be sure you have a USA-28XA, there are also 28X and 28XB
 323           models, the label underneath has the actual part number.
 324
 325 config USB_SERIAL_KEYSPAN_USA28XB
 326         bool "USB Keyspan USA-28XB Firmware"
 327         depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
 328         help
 329           Say Y here to include firmware for the USA-28XB converter.
 330           Be sure you have a USA-28XB, there are also 28X and 28XA
 331           models, the label underneath has the actual part number.
 332
 333 config USB_SERIAL_KEYSPAN_USA19
 334         bool "USB Keyspan USA-19 Firmware"
 335         depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
 336         help
 337           Say Y here to include firmware for the USA-19 converter.
 338
 339 config USB_SERIAL_KEYSPAN_USA18X
 340         bool "USB Keyspan USA-18X Firmware"
 341         depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
 342         help
 343           Say Y here to include firmware for the USA-18X converter.
 344
 345 config USB_SERIAL_KEYSPAN_USA19W
 346         bool "USB Keyspan USA-19W Firmware"
 347         depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
 348         help
 349           Say Y here to include firmware for the USA-19W converter.
 350
 351 config USB_SERIAL_KEYSPAN_USA19QW
 352         bool "USB Keyspan USA-19QW Firmware"
 353         depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
 354         help
 355           Say Y here to include firmware for the USA-19QW converter.
 356
 357 config USB_SERIAL_KEYSPAN_USA19QI
 358         bool "USB Keyspan USA-19QI Firmware"
 359         depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
 360         help
 361           Say Y here to include firmware for the USA-19QI converter.
 362
 363 config USB_SERIAL_KEYSPAN_USA49W
 364         bool "USB Keyspan USA-49W Firmware"
 365         depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
 366         help
 367           Say Y here to include firmware for the USA-49W converter.
 368
 369 config USB_SERIAL_KEYSPAN_USA49WLC
 370         bool "USB Keyspan USA-49WLC Firmware"
 371         depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
 372         help
 373           Say Y here to include firmware for the USA-49WLC converter.
 374
 375 config USB_SERIAL_KLSI
 376         tristate "USB KL5KUSB105 (Palmconnect) Driver"
 377         ---help---
 378           Say Y here if you want to use a KL5KUSB105 - based single port
 379           serial adapter. The most widely known -- and currently the only
 380           tested -- device in this category is the PalmConnect USB Serial
 381           adapter sold by Palm Inc. for use with their Palm III and Palm V
 382           series PDAs.
 383
 384           Please read <file:Documentation/usb/usb-serial.txt> for more
 385           information.
 386
 387           To compile this driver as a module, choose M here: the
 388           module will be called kl5kusb105.
 389
 390 config USB_SERIAL_KOBIL_SCT
 391         tristate "USB KOBIL chipcard reader"
 392         ---help---
 393           Say Y here if you want to use one of the following KOBIL USB chipcard
 394           readers:
 395
 396             - USB TWIN
 397             - KAAN Standard Plus
 398             - KAAN SIM
 399             - SecOVID Reader Plus
 400             - B1 Professional
 401             - KAAN Professional
 402
 403           Note that you need a current CT-API.
 404           To compile this driver as a module, choose M here: the
 405           module will be called kobil_sct.
 406
 407 config USB_SERIAL_MCT_U232
 408         tristate "USB MCT Single Port Serial Driver"
 409         ---help---
 410           Say Y here if you want to use a USB Serial single port adapter from
 411           Magic Control Technology Corp. (U232 is one of the model numbers).
 412
 413           This driver also works with Sitecom U232-P25 and D-Link DU-H3SP USB
 414           BAY, Belkin F5U109, and Belkin F5U409 devices.
 415
 416           To compile this driver as a module, choose M here: the
 417           module will be called mct_u232.
 418
 419 config USB_SERIAL_MOS7720
 420         tristate "USB Moschip 7720 Serial Driver"
 421         ---help---
 422           Say Y here if you want to use USB Serial single and double
 423           port adapters from Moschip Semiconductor Tech.
 424
 425           To compile this driver as a module, choose M here: the
 426           module will be called mos7720.
 427
 428 config USB_SERIAL_MOS7715_PARPORT
 429         bool "Support for parallel port on the Moschip 7715"
 430         depends on USB_SERIAL_MOS7720
 431         depends on PARPORT=y || PARPORT=USB_SERIAL_MOS7720
 432         select PARPORT_NOT_PC
 433         ---help---
 434         Say Y if you have a Moschip 7715 device and would like to use
 435         the parallel port it provides.  The port will register with
 436         the parport subsystem as a low-level driver.
 437
 438 config USB_SERIAL_MOS7840
 439         tristate "USB Moschip 7840/7820 USB Serial Driver"
 440         ---help---
 441           Say Y here if you want to use a MCS7840 Quad-Serial or MCS7820
 442           Dual-Serial port device from MosChip Semiconductor.
 443
 444           The MCS7840 and MCS7820 have been developed to connect a wide range
 445           of standard serial devices to a USB host.  The MCS7840 has a USB
 446           device controller connected to four (4) individual UARTs while the
 447           MCS7820 controller connects to two (2) individual UARTs.
 448
 449           To compile this driver as a module, choose M here: the
 450           module will be called mos7840.  If unsure, choose N.
 451
 452 config USB_SERIAL_MOTOROLA
 453         tristate "USB Motorola Phone modem driver"
 454         ---help---
 455           Say Y here if you want to use a Motorola phone with a USB
 456           connector as a modem link.
 457
 458           To compile this driver as a module, choose M here: the
 459           module will be called moto_modem.  If unsure, choose N.
 460
 461 config USB_SERIAL_NAVMAN
 462         tristate "USB Navman GPS device"
 463         help
 464           To compile this driver as a module, choose M here: the
 465           module will be called navman.
 466
 467 config USB_SERIAL_PL2303
 468         tristate "USB Prolific 2303 Single Port Serial Driver"
 469         help
 470           Say Y here if you want to use the PL2303 USB Serial single port
 471           adapter from Prolific.
 472
 473           To compile this driver as a module, choose M here: the
 474           module will be called pl2303.
 475
 476 config USB_SERIAL_OTI6858
 477         tristate "USB Ours Technology Inc. OTi-6858 USB To RS232 Bridge Controller"
 478         help
 479           Say Y here if you want to use the OTi-6858 single port USB to serial
 480           converter device.
 481
 482           To compile this driver as a module, choose M here: the
 483           module will be called oti6858.
 484
 485 config USB_SERIAL_QCAUX
 486         tristate "USB Qualcomm Auxiliary Serial Port Driver"
 487         help
 488           Say Y here if you want to use the auxiliary serial ports provided
 489           by many modems based on Qualcomm chipsets.  These ports often use
 490           a proprietary protocol called DM and cannot be used for AT- or
 491           PPP-based communication.
 492
 493           To compile this driver as a module, choose M here: the
 494           module will be called qcaux.  If unsure, choose N.
 495
 496 config USB_SERIAL_QUALCOMM
 497         tristate "USB Qualcomm Serial modem"
 498         select USB_SERIAL_WWAN
 499         help
 500           Say Y here if you have a Qualcomm USB modem device.  These are
 501           usually wireless cellular modems.
 502
 503           To compile this driver as a module, choose M here: the
 504           module will be called qcserial.
 505
 506 config USB_SERIAL_SPCP8X5
 507         tristate "USB SPCP8x5 USB To Serial Driver"
 508         help
 509           Say Y here if you want to use the spcp8x5 converter chip.  This is
 510           commonly found in some Z-Wave USB devices.
 511
 512           To compile this driver as a module, choose M here: the
 513           module will be called spcp8x5.
 514
 515 config USB_SERIAL_HP4X
 516         tristate "USB HP4x Calculators support"
 517         help
 518           Say Y here if you want to use an Hewlett-Packard 4x Calculator.
 519
 520           To compile this driver as a module, choose M here: the
 521           module will be called hp4x.
 522
 523 config USB_SERIAL_SAFE
 524         tristate "USB Safe Serial (Encapsulated) Driver"
 525
 526 config USB_SERIAL_SAFE_PADDED
 527         bool "USB Secure Encapsulated Driver - Padded"
 528         depends on USB_SERIAL_SAFE
 529
 530 config USB_SERIAL_SIEMENS_MPI
 531         tristate "USB Siemens MPI driver"
 532         help
 533           Say M here if you want to use a Siemens USB/MPI adapter.
 534
 535           To compile this driver as a module, choose M here: the
 536           module will be called siemens_mpi.
 537
 538 config USB_SERIAL_SIERRAWIRELESS
 539         tristate "USB Sierra Wireless Driver"
 540         help
 541           Say M here if you want to use Sierra Wireless devices.
 542
 543           Many devices have a feature known as TRU-Install. For those devices
 544           to work properly, the USB Storage Sierra feature must be enabled.
 545
 546           To compile this driver as a module, choose M here: the
 547           module will be called sierra.
 548
 549 config USB_SERIAL_SYMBOL
 550         tristate "USB Symbol Barcode driver (serial mode)"
 551         help
 552           Say Y here if you want to use a Symbol USB Barcode device
 553           in serial emulation mode.
 554
 555           To compile this driver as a module, choose M here: the
 556           module will be called symbolserial.
 557
 558 config USB_SERIAL_TI
 559         tristate "USB TI 3410/5052 Serial Driver"
 560         help
 561           Say Y here if you want to use the TI USB 3410 or 5052
 562           serial devices.
 563
 564           To compile this driver as a module, choose M here: the
 565           module will be called ti_usb_3410_5052.
 566
 567 config USB_SERIAL_CYBERJACK
 568         tristate "USB REINER SCT cyberJack pinpad/e-com chipcard reader"
 569         ---help---
 570           Say Y here if you want to use a cyberJack pinpad/e-com USB chipcard
 571           reader. This is an interface to ISO 7816 compatible contact-based
 572           chipcards, e.g. GSM SIMs.
 573
 574           To compile this driver as a module, choose M here: the
 575           module will be called cyberjack.
 576
 577           If unsure, say N.
 578
 579 config USB_SERIAL_XIRCOM
 580         tristate "USB Xircom / Entregra Single Port Serial Driver"
 581         select USB_EZUSB
 582         help
 583           Say Y here if you want to use a Xircom or Entregra single port USB to
 584           serial converter device.  This driver makes use of firmware
 585           developed from scratch by Brian Warner.
 586
 587           To compile this driver as a module, choose M here: the
 588           module will be called keyspan_pda.
 589
 590 config USB_SERIAL_WWAN
 591         tristate
 592
 593 config USB_SERIAL_OPTION
 594         tristate "USB driver for GSM and CDMA modems"
 595         select USB_SERIAL_WWAN
 596         help
 597           Say Y here if you have a GSM or CDMA modem that's connected to USB.
 598
 599           This driver also supports several PCMCIA cards which have a
 600           built-in OHCI-USB adapter and an internally-connected GSM modem.
 601           The USB bus on these cards is not accessible externally.
 602
 603           Supported devices include (some of?) those made by:
 604           Option, Huawei, Audiovox, Novatel Wireless, or Anydata.
 605
 606           To compile this driver as a module, choose M here: the
 607           module will be called option.
 608
 609           If this driver doesn't recognize your device,
 610           it might be accessible via the FTDI_SIO driver.
 611
 612 config USB_SERIAL_OMNINET
 613         tristate "USB ZyXEL omni.net LCD Plus Driver"
 614         help
 615           Say Y here if you want to use a ZyXEL omni.net LCD ISDN TA.
 616
 617           To compile this driver as a module, choose M here: the
 618           module will be called omninet.
 619
 620 config USB_SERIAL_OPTICON
 621         tristate "USB Opticon Barcode driver (serial mode)"
 622         help
 623           Say Y here if you want to use a Opticon USB Barcode device
 624           in serial emulation mode.
 625
 626           To compile this driver as a module, choose M here: the
 627           module will be called opticon.
 628
 629 config USB_SERIAL_VIVOPAY_SERIAL
 630         tristate "USB ViVOpay serial interface driver"
 631         help
 632           Say Y here if you want to use a ViVOtech ViVOpay USB device.
 633
 634           To compile this driver as a module, choose M here: the
 635           module will be called vivopay-serial.
 636
 637 config USB_SERIAL_ZIO
 638         tristate "ZIO Motherboard USB serial interface driver"
 639         help
 640           Say Y here if you want to use ZIO Motherboard.
 641
 642           To compile this driver as a module, choose M here: the
 643           module will be called zio.
 644
 645 config USB_SERIAL_SSU100
 646         tristate "USB Quatech SSU-100 Single Port Serial Driver"
 647         help
 648           Say Y here if you want to use the Quatech SSU-100 single
 649           port usb to serial adapter.
 650
 651           To compile this driver as a module, choose M here: the
 652           module will be called ssu100.
 653
 654 config USB_SERIAL_DEBUG
 655         tristate "USB Debugging Device"
 656         help
 657           Say Y here if you have a USB debugging device used to receive
 658           debugging data from another machine.  The most common of these
 659           devices is the NetChip TurboCONNECT device.
 660
 661           To compile this driver as a module, choose M here: the
 662           module will be called usb-debug.
 663
 664 endif # USB_SERIAL