drivers/usb/serial/Kconfig

   1 #
   2 # USB Serial device configuration
   3 #
   4
   5 menuconfig USB_SERIAL
   6         tristate "USB Serial Converter support"
   7         depends on TTY
   8         ---help---
   9           Say Y here if you have a USB device that provides normal serial
  10           ports, or acts like a serial device, and you want to connect it to
  11           your USB bus.
  12
  13           Please read <file:Documentation/usb/usb-serial.txt> for more
  14           information on the specifics of the different devices that are
  15           supported, and on how to use them.
  16
  17           To compile this driver as a module, choose M here: the
  18           module will be called usbserial.
  19
  20 if USB_SERIAL
  21
  22 config USB_SERIAL_CONSOLE
  23         bool "USB Serial Console device support"
  24         depends on USB_SERIAL=y
  25         ---help---
  26           If you say Y here, it will be possible to use a USB to serial
  27           converter port as the system console (the system console is the
  28           device which receives all kernel messages and warnings and which
  29           allows logins in single user mode). This could be useful if some
  30           terminal or printer is connected to that serial port.
  31
  32           Even if you say Y here, the currently visible virtual console
  33           (/dev/tty0) will still be used as the system console by default, but
  34           you can alter that using a kernel command line option such as
  35           "console=ttyUSB0". (Try "man bootparam" or see the documentation of
  36           your boot loader (lilo or loadlin) about how to pass options to the
  37           kernel at boot time.)
  38
  39           If you don't have a VGA card installed and you say Y here, the
  40           kernel will automatically use the first USB to serial converter
  41           port, /dev/ttyUSB0, as system console.
  42
  43           If unsure, say N.
  44
  45 config USB_SERIAL_GENERIC
  46         bool "USB Generic Serial Driver"
  47         help
  48           Say Y here if you want to use the generic USB serial driver.  Please
  49           read <file:Documentation/usb/usb-serial.txt> for more information on
  50           using this driver.  It is recommended that the "USB Serial converter
  51           support" be compiled as a module for this driver to be used
  52           properly.
  53
  54 config USB_SERIAL_SIMPLE
  55         tristate "USB Serial Simple Driver"
  56         help
  57           Say Y here to use the USB serial "simple" driver.  This driver
  58           handles a wide range of very simple devices, all in one
  59           driver.  Specifically, it supports:
  60                 - Suunto ANT+ USB device.
  61                 - Fundamental Software dongle.
  62                 - HP4x calculators
  63                 - a number of Motorola phones
  64                 - Siemens USB/MPI adapter.
  65                 - ViVOtech ViVOpay USB device.
  66                 - Infineon Modem Flashloader USB interface
  67                 - ZIO Motherboard USB serial interface
  68
  69           To compile this driver as a module, choose M here: the module
  70           will be called usb-serial-simple.
  71
  72 config USB_SERIAL_AIRCABLE
  73         tristate "USB AIRcable Bluetooth Dongle Driver"
  74         help
  75             Say Y here if you want to use USB AIRcable Bluetooth Dongle.
  76
  77             To compile this driver as a module, choose M here: the module
  78             will be called aircable.
  79
  80 config USB_SERIAL_ARK3116
  81         tristate "USB ARK Micro 3116 USB Serial Driver"
  82         help
  83           Say Y here if you want to use a ARK Micro 3116 USB to Serial
  84           device.
  85
  86           To compile this driver as a module, choose M here: the
  87           module will be called ark3116
  88
  89 config USB_SERIAL_BELKIN
  90         tristate "USB Belkin and Peracom Single Port Serial Driver"
  91         help
  92           Say Y here if you want to use a Belkin USB Serial single port
  93           adaptor (F5U103 is one of the model numbers) or the Peracom single
  94           port USB to serial adapter.
  95
  96           To compile this driver as a module, choose M here: the
  97           module will be called belkin_sa.
  98
  99 config USB_SERIAL_CH341
 100         tristate "USB Winchiphead CH341 Single Port Serial Driver"
 101         help
 102           Say Y here if you want to use a Winchiphead CH341 single port
 103           USB to serial adapter.
 104
 105           To compile this driver as a module, choose M here: the
 106           module will be called ch341.
 107
 108 config USB_SERIAL_WHITEHEAT
 109         tristate "USB ConnectTech WhiteHEAT Serial Driver"
 110         select USB_EZUSB_FX2
 111         help
 112           Say Y here if you want to use a ConnectTech WhiteHEAT 4 port
 113           USB to serial converter device.
 114
 115           To compile this driver as a module, choose M here: the
 116           module will be called whiteheat.
 117
 118 config USB_SERIAL_DIGI_ACCELEPORT
 119         tristate "USB Digi International AccelePort USB Serial Driver"
 120         ---help---
 121           Say Y here if you want to use Digi AccelePort USB 2 or 4 devices,
 122           2 port (plus parallel port) and 4 port USB serial converters.  The
 123           parallel port on the USB 2 appears as a third serial port on Linux.
 124           The Digi Acceleport USB 8 is not yet supported by this driver.
 125
 126           This driver works under SMP with the usb-uhci driver.  It does not
 127           work under SMP with the uhci driver.
 128
 129           To compile this driver as a module, choose M here: the
 130           module will be called digi_acceleport.
 131
 132 config USB_SERIAL_CP210X
 133         tristate "USB CP210x family of UART Bridge Controllers"
 134         help
 135           Say Y here if you want to use a CP2101/CP2102/CP2103 based USB
 136           to RS232 converters.
 137
 138           To compile this driver as a module, choose M here: the
 139           module will be called cp210x.
 140
 141 config USB_SERIAL_CYPRESS_M8
 142         tristate "USB Cypress M8 USB Serial Driver"
 143         help
 144           Say Y here if you want to use a device that contains the Cypress
 145           USB to Serial microcontroller, such as the DeLorme Earthmate GPS.
 146
 147                 Attempted SMP support... send bug reports!
 148
 149           Supported microcontrollers in the CY4601 family are:
 150                 CY7C63741 CY7C63742 CY7C63743 CY7C64013
 151
 152           To compile this driver as a module, choose M here: the
 153           module will be called cypress_m8.
 154
 155 config USB_SERIAL_EMPEG
 156         tristate "USB Empeg empeg-car Mark I/II Driver"
 157         help
 158           Say Y here if you want to connect to your Empeg empeg-car Mark I/II
 159           mp3 player via USB.  The driver uses a single ttyUSB{0,1,2,...}
 160           device node.  See <file:Documentation/usb/usb-serial.txt> for more
 161           tidbits of information.
 162
 163           To compile this driver as a module, choose M here: the
 164           module will be called empeg.
 165
 166 config USB_SERIAL_FTDI_SIO
 167         tristate "USB FTDI Single Port Serial Driver"
 168         ---help---
 169           Say Y here if you want to use a FTDI SIO single port USB to serial
 170           converter device. The implementation I have is called the USC-1000.
 171           This driver has also be tested with the 245 and 232 devices.
 172
 173           See <http://ftdi-usb-sio.sourceforge.net/> for more
 174           information on this driver and the device.
 175
 176           To compile this driver as a module, choose M here: the
 177           module will be called ftdi_sio.
 178
 179 config USB_SERIAL_VISOR
 180         tristate "USB Handspring Visor / Palm m50x / Sony Clie Driver"
 181         help
 182           Say Y here if you want to connect to your HandSpring Visor, Palm
 183           m500 or m505 through its USB docking station. See
 184           <http://usbvisor.sourceforge.net/index.php3> for more information on using this
 185           driver.
 186
 187           To compile this driver as a module, choose M here: the
 188           module will be called visor.
 189
 190 config USB_SERIAL_IPAQ
 191         tristate "USB PocketPC PDA Driver"
 192         help
 193           Say Y here if you want to connect to your Compaq iPAQ, HP Jornada
 194           or any other PDA running Windows CE 3.0 or PocketPC 2002
 195           using a USB cradle/cable. For information on using the driver,
 196           read <file:Documentation/usb/usb-serial.txt>.
 197
 198           To compile this driver as a module, choose M here: the
 199           module will be called ipaq.
 200
 201 config USB_SERIAL_IR
 202         tristate "USB IR Dongle Serial Driver"
 203         help
 204           Say Y here if you want to enable simple serial support for USB IrDA
 205           devices.  This is useful if you do not want to use the full IrDA
 206           stack.
 207
 208           To compile this driver as a module, choose M here: the
 209           module will be called ir-usb.
 210
 211 config USB_SERIAL_EDGEPORT
 212         tristate "USB Inside Out Edgeport Serial Driver"
 213         ---help---
 214           Say Y here if you want to use any of the following devices from
 215           Inside Out Networks (Digi):
 216           Edgeport/4
 217           Rapidport/4
 218           Edgeport/4t
 219           Edgeport/2
 220           Edgeport/4i
 221           Edgeport/2i
 222           Edgeport/421
 223           Edgeport/21
 224           Edgeport/8
 225           Edgeport/8 Dual
 226           Edgeport/2D8
 227           Edgeport/4D8
 228           Edgeport/8i
 229           Edgeport/2 DIN
 230           Edgeport/4 DIN
 231           Edgeport/16 Dual
 232
 233           To compile this driver as a module, choose M here: the
 234           module will be called io_edgeport.
 235
 236 config USB_SERIAL_EDGEPORT_TI
 237         tristate "USB Inside Out Edgeport Serial Driver (TI devices)"
 238         help
 239           Say Y here if you want to use any of the devices from Inside Out
 240           Networks (Digi) that are not supported by the io_edgeport driver.
 241           This includes the Edgeport/1 device.
 242
 243           To compile this driver as a module, choose M here: the
 244           module will be called io_ti.
 245
 246 config USB_SERIAL_F81232
 247         tristate "USB Fintek F81232 Single Port Serial Driver"
 248         help
 249           Say Y here if you want to use the Fintek F81232 single
 250           port usb to serial adapter.
 251
 252           To compile this driver as a module, choose M here: the
 253           module will be called f81232.
 254
 255 config USB_SERIAL_GARMIN
 256        tristate "USB Garmin GPS driver"
 257        help
 258          Say Y here if you want to connect to your Garmin GPS.
 259          Should work with most Garmin GPS devices which have a native USB port.
 260
 261          See <http://sourceforge.net/projects/garmin-gps> for the latest
 262          version of the driver.
 263
 264          To compile this driver as a module, choose M here: the
 265          module will be called garmin_gps.
 266
 267 config USB_SERIAL_IPW
 268         tristate "USB IPWireless (3G UMTS TDD) Driver"
 269         select USB_SERIAL_WWAN
 270         help
 271           Say Y here if you want to use a IPWireless USB modem such as
 272           the ones supplied by Axity3G/Sentech South Africa.
 273
 274           To compile this driver as a module, choose M here: the
 275           module will be called ipw.
 276
 277 config USB_SERIAL_IUU
 278         tristate "USB Infinity USB Unlimited Phoenix Driver"
 279         help
 280           Say Y here if you want to use a IUU in phoenix mode and get
 281           an extra ttyUSBx device. More information available on
 282           http://eczema.ecze.com/iuu_phoenix.html
 283
 284           To compile this driver as a module, choose M here: the
 285           module will be called iuu_phoenix.o
 286
 287 config USB_SERIAL_KEYSPAN_PDA
 288         tristate "USB Keyspan PDA Single Port Serial Driver"
 289         select USB_EZUSB_FX2
 290         help
 291           Say Y here if you want to use a Keyspan PDA single port USB to
 292           serial converter device.  This driver makes use of firmware
 293           developed from scratch by Brian Warner.
 294
 295           To compile this driver as a module, choose M here: the
 296           module will be called keyspan_pda.
 297
 298 config USB_SERIAL_KEYSPAN
 299         tristate "USB Keyspan USA-xxx Serial Driver"
 300         select USB_EZUSB_FX2
 301         ---help---
 302           Say Y here if you want to use Keyspan USB to serial converter
 303           devices.  This driver makes use of Keyspan's official firmware
 304           and was developed with their support.  You must also include
 305           firmware to support your particular device(s).
 306
 307           See <http://blemings.org/hugh/keyspan.html> for more information.
 308
 309           To compile this driver as a module, choose M here: the
 310           module will be called keyspan.
 311
 312 config USB_SERIAL_KEYSPAN_MPR
 313         bool "USB Keyspan MPR Firmware"
 314         depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
 315         help
 316           Say Y here to include firmware for the Keyspan MPR converter.
 317
 318 config USB_SERIAL_KEYSPAN_USA28
 319         bool "USB Keyspan USA-28 Firmware"
 320         depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
 321         help
 322           Say Y here to include firmware for the USA-28 converter.
 323
 324 config USB_SERIAL_KEYSPAN_USA28X
 325         bool "USB Keyspan USA-28X Firmware"
 326         depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
 327         help
 328           Say Y here to include firmware for the USA-28X converter.
 329           Be sure you have a USA-28X, there are also 28XA and 28XB
 330           models, the label underneath has the actual part number.
 331
 332 config USB_SERIAL_KEYSPAN_USA28XA
 333         bool "USB Keyspan USA-28XA Firmware"
 334         depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
 335         help
 336           Say Y here to include firmware for the USA-28XA converter.
 337           Be sure you have a USA-28XA, there are also 28X and 28XB
 338           models, the label underneath has the actual part number.
 339
 340 config USB_SERIAL_KEYSPAN_USA28XB
 341         bool "USB Keyspan USA-28XB Firmware"
 342         depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
 343         help
 344           Say Y here to include firmware for the USA-28XB converter.
 345           Be sure you have a USA-28XB, there are also 28X and 28XA
 346           models, the label underneath has the actual part number.
 347
 348 config USB_SERIAL_KEYSPAN_USA19
 349         bool "USB Keyspan USA-19 Firmware"
 350         depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
 351         help
 352           Say Y here to include firmware for the USA-19 converter.
 353
 354 config USB_SERIAL_KEYSPAN_USA18X
 355         bool "USB Keyspan USA-18X Firmware"
 356         depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
 357         help
 358           Say Y here to include firmware for the USA-18X converter.
 359
 360 config USB_SERIAL_KEYSPAN_USA19W
 361         bool "USB Keyspan USA-19W Firmware"
 362         depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
 363         help
 364           Say Y here to include firmware for the USA-19W converter.
 365
 366 config USB_SERIAL_KEYSPAN_USA19QW
 367         bool "USB Keyspan USA-19QW Firmware"
 368         depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
 369         help
 370           Say Y here to include firmware for the USA-19QW converter.
 371
 372 config USB_SERIAL_KEYSPAN_USA19QI
 373         bool "USB Keyspan USA-19QI Firmware"
 374         depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
 375         help
 376           Say Y here to include firmware for the USA-19QI converter.
 377
 378 config USB_SERIAL_KEYSPAN_USA49W
 379         bool "USB Keyspan USA-49W Firmware"
 380         depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
 381         help
 382           Say Y here to include firmware for the USA-49W converter.
 383
 384 config USB_SERIAL_KEYSPAN_USA49WLC
 385         bool "USB Keyspan USA-49WLC Firmware"
 386         depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
 387         help
 388           Say Y here to include firmware for the USA-49WLC converter.
 389
 390 config USB_SERIAL_KLSI
 391         tristate "USB KL5KUSB105 (Palmconnect) Driver"
 392         ---help---
 393           Say Y here if you want to use a KL5KUSB105 - based single port
 394           serial adapter. The most widely known -- and currently the only
 395           tested -- device in this category is the PalmConnect USB Serial
 396           adapter sold by Palm Inc. for use with their Palm III and Palm V
 397           series PDAs.
 398
 399           Please read <file:Documentation/usb/usb-serial.txt> for more
 400           information.
 401
 402           To compile this driver as a module, choose M here: the
 403           module will be called kl5kusb105.
 404
 405 config USB_SERIAL_KOBIL_SCT
 406         tristate "USB KOBIL chipcard reader"
 407         ---help---
 408           Say Y here if you want to use one of the following KOBIL USB chipcard
 409           readers:
 410
 411             - USB TWIN
 412             - KAAN Standard Plus
 413             - KAAN SIM
 414             - SecOVID Reader Plus
 415             - B1 Professional
 416             - KAAN Professional
 417
 418           Note that you need a current CT-API.
 419           To compile this driver as a module, choose M here: the
 420           module will be called kobil_sct.
 421
 422 config USB_SERIAL_MCT_U232
 423         tristate "USB MCT Single Port Serial Driver"
 424         ---help---
 425           Say Y here if you want to use a USB Serial single port adapter from
 426           Magic Control Technology Corp. (U232 is one of the model numbers).
 427
 428           This driver also works with Sitecom U232-P25 and D-Link DU-H3SP USB
 429           BAY, Belkin F5U109, and Belkin F5U409 devices.
 430
 431           To compile this driver as a module, choose M here: the
 432           module will be called mct_u232.
 433
 434 config USB_SERIAL_METRO
 435         tristate "USB Metrologic Instruments USB-POS Barcode Scanner Driver"
 436         ---help---
 437           Say Y here if you want to use a USB POS Metrologic barcode scanner.
 438
 439           To compile this driver as a module, choose M here: the
 440           module will be called metro-usb.
 441
 442 config USB_SERIAL_MOS7720
 443         tristate "USB Moschip 7720 Serial Driver"
 444         ---help---
 445           Say Y here if you want to use USB Serial single and double
 446           port adapters from Moschip Semiconductor Tech.
 447
 448           To compile this driver as a module, choose M here: the
 449           module will be called mos7720.
 450
 451 config USB_SERIAL_MOS7715_PARPORT
 452         bool "Support for parallel port on the Moschip 7715"
 453         depends on USB_SERIAL_MOS7720
 454         depends on PARPORT=y || PARPORT=USB_SERIAL_MOS7720
 455         select PARPORT_NOT_PC
 456         ---help---
 457         Say Y if you have a Moschip 7715 device and would like to use
 458         the parallel port it provides.  The port will register with
 459         the parport subsystem as a low-level driver.
 460
 461 config USB_SERIAL_MOS7840
 462         tristate "USB Moschip 7840/7820 USB Serial Driver"
 463         ---help---
 464           Say Y here if you want to use a MCS7840 Quad-Serial or MCS7820
 465           Dual-Serial port device from MosChip Semiconductor.
 466
 467           The MCS7840 and MCS7820 have been developed to connect a wide range
 468           of standard serial devices to a USB host.  The MCS7840 has a USB
 469           device controller connected to four (4) individual UARTs while the
 470           MCS7820 controller connects to two (2) individual UARTs.
 471
 472           To compile this driver as a module, choose M here: the
 473           module will be called mos7840.  If unsure, choose N.
 474
 475 config USB_SERIAL_NAVMAN
 476         tristate "USB Navman GPS device"
 477         help
 478           To compile this driver as a module, choose M here: the
 479           module will be called navman.
 480
 481 config USB_SERIAL_PL2303
 482         tristate "USB Prolific 2303 Single Port Serial Driver"
 483         help
 484           Say Y here if you want to use the PL2303 USB Serial single port
 485           adapter from Prolific.
 486
 487           To compile this driver as a module, choose M here: the
 488           module will be called pl2303.
 489
 490 config USB_SERIAL_OTI6858
 491         tristate "USB Ours Technology Inc. OTi-6858 USB To RS232 Bridge Controller"
 492         help
 493           Say Y here if you want to use the OTi-6858 single port USB to serial
 494           converter device.
 495
 496           To compile this driver as a module, choose M here: the
 497           module will be called oti6858.
 498
 499 config USB_SERIAL_QCAUX
 500         tristate "USB Qualcomm Auxiliary Serial Port Driver"
 501         help
 502           Say Y here if you want to use the auxiliary serial ports provided
 503           by many modems based on Qualcomm chipsets.  These ports often use
 504           a proprietary protocol called DM and cannot be used for AT- or
 505           PPP-based communication.
 506
 507           To compile this driver as a module, choose M here: the
 508           module will be called qcaux.  If unsure, choose N.
 509
 510 config USB_SERIAL_QUALCOMM
 511         tristate "USB Qualcomm Serial modem"
 512         select USB_SERIAL_WWAN
 513         help
 514           Say Y here if you have a Qualcomm USB modem device.  These are
 515           usually wireless cellular modems.
 516
 517           To compile this driver as a module, choose M here: the
 518           module will be called qcserial.
 519
 520 config USB_SERIAL_SPCP8X5
 521         tristate "USB SPCP8x5 USB To Serial Driver"
 522         help
 523           Say Y here if you want to use the spcp8x5 converter chip.  This is
 524           commonly found in some Z-Wave USB devices.
 525
 526           To compile this driver as a module, choose M here: the
 527           module will be called spcp8x5.
 528
 529 config USB_SERIAL_SAFE
 530         tristate "USB Safe Serial (Encapsulated) Driver"
 531
 532 config USB_SERIAL_SAFE_PADDED
 533         bool "USB Secure Encapsulated Driver - Padded"
 534         depends on USB_SERIAL_SAFE
 535
 536 config USB_SERIAL_SIERRAWIRELESS
 537         tristate "USB Sierra Wireless Driver"
 538         help
 539           Say M here if you want to use Sierra Wireless devices.
 540
 541           Many devices have a feature known as TRU-Install. For those devices
 542           to work properly, the USB Storage Sierra feature must be enabled.
 543
 544           To compile this driver as a module, choose M here: the
 545           module will be called sierra.
 546
 547 config USB_SERIAL_SYMBOL
 548         tristate "USB Symbol Barcode driver (serial mode)"
 549         help
 550           Say Y here if you want to use a Symbol USB Barcode device
 551           in serial emulation mode.
 552
 553           To compile this driver as a module, choose M here: the
 554           module will be called symbolserial.
 555
 556 config USB_SERIAL_TI
 557         tristate "USB TI 3410/5052 Serial Driver"
 558         help
 559           Say Y here if you want to use the TI USB 3410 or 5052
 560           serial devices.
 561
 562           To compile this driver as a module, choose M here: the
 563           module will be called ti_usb_3410_5052.
 564
 565 config USB_SERIAL_CYBERJACK
 566         tristate "USB REINER SCT cyberJack pinpad/e-com chipcard reader"
 567         ---help---
 568           Say Y here if you want to use a cyberJack pinpad/e-com USB chipcard
 569           reader. This is an interface to ISO 7816 compatible contact-based
 570           chipcards, e.g. GSM SIMs.
 571
 572           To compile this driver as a module, choose M here: the
 573           module will be called cyberjack.
 574
 575           If unsure, say N.
 576
 577 config USB_SERIAL_XIRCOM
 578         tristate "USB Xircom / Entregra Single Port Serial Driver"
 579         select USB_EZUSB_FX2
 580         help
 581           Say Y here if you want to use a Xircom or Entregra single port USB to
 582           serial converter device.  This driver makes use of firmware
 583           developed from scratch by Brian Warner.
 584
 585           To compile this driver as a module, choose M here: the
 586           module will be called keyspan_pda.
 587
 588 config USB_SERIAL_WWAN
 589         tristate
 590
 591 config USB_SERIAL_OPTION
 592         tristate "USB driver for GSM and CDMA modems"
 593         select USB_SERIAL_WWAN
 594         help
 595           Say Y here if you have a GSM or CDMA modem that's connected to USB.
 596
 597           This driver also supports several PCMCIA cards which have a
 598           built-in OHCI-USB adapter and an internally-connected GSM modem.
 599           The USB bus on these cards is not accessible externally.
 600
 601           Supported devices include (some of?) those made by:
 602           Option, Huawei, Audiovox, Novatel Wireless, or Anydata.
 603
 604           To compile this driver as a module, choose M here: the
 605           module will be called option.
 606
 607           If this driver doesn't recognize your device,
 608           it might be accessible via the FTDI_SIO driver.
 609
 610 config USB_SERIAL_OMNINET
 611         tristate "USB ZyXEL omni.net LCD Plus Driver"
 612         help
 613           Say Y here if you want to use a ZyXEL omni.net LCD ISDN TA.
 614
 615           To compile this driver as a module, choose M here: the
 616           module will be called omninet.
 617
 618 config USB_SERIAL_OPTICON
 619         tristate "USB Opticon Barcode driver (serial mode)"
 620         help
 621           Say Y here if you want to use a Opticon USB Barcode device
 622           in serial emulation mode.
 623
 624           To compile this driver as a module, choose M here: the
 625           module will be called opticon.
 626
 627 config USB_SERIAL_XSENS_MT
 628         tristate "Xsens motion tracker serial interface driver"
 629         help
 630           Say Y here if you want to use Xsens motion trackers.
 631
 632           This driver supports the new generation of motion trackers
 633           by Xsens. Older devices can be accessed using the FTDI_SIO
 634           driver.
 635
 636           To compile this driver as a module, choose M here: the
 637           module will be called xsens_mt.
 638
 639 config USB_SERIAL_WISHBONE
 640         tristate "USB-Wishbone adapter interface driver"
 641         help
 642           Say Y here if you want to use a USB attached Wishbone bus.
 643
 644           Wishbone is an open hardware SoC bus commonly used in FPGA
 645           designs. Bus access can be serialized using the Etherbone
 646           protocol <http://www.ohwr.org/projects/etherbone-core>.
 647
 648           This driver is intended to be used with devices which attach
 649           their internal Wishbone bus to a USB serial interface using
 650           the Etherbone protocol. A userspace library is required to
 651           speak the protocol made available by this driver as ttyUSBx.
 652
 653           To compile this driver as a module, choose M here: the
 654           module will be called wishbone-serial.
 655
 656 config USB_SERIAL_ZTE
 657         tristate "ZTE USB serial driver"
 658         help
 659           Say Y here if you want to use a ZTE USB to serial device.
 660
 661           To compile this driver as a module, choose M here: the
 662           module will be called zte.
 663
 664 config USB_SERIAL_SSU100
 665         tristate "USB Quatech SSU-100 Single Port Serial Driver"
 666         help
 667           Say Y here if you want to use the Quatech SSU-100 single
 668           port usb to serial adapter.
 669
 670           To compile this driver as a module, choose M here: the
 671           module will be called ssu100.
 672
 673 config USB_SERIAL_QT2
 674         tristate "USB Quatech Serial Driver for USB 2 devices"
 675         help
 676           Say Y here if you want to use the Quatech USB 2
 677           serial adapters.
 678
 679           To compile this driver as a module, choose M here: the
 680           module will be called quatech-serial.
 681
 682 config USB_SERIAL_DEBUG
 683         tristate "USB Debugging Device"
 684         help
 685           Say Y here if you have a USB debugging device used to receive
 686           debugging data from another machine.  The most common of these
 687           devices is the NetChip TurboCONNECT device.
 688
 689           To compile this driver as a module, choose M here: the
 690           module will be called usb-debug.
 691
 692 endif # USB_SERIAL